1 #include <linux/errno.h>
2 #include <linux/signal.h>
3 #include <linux/sched.h>
4 #include <linux/ioport.h>
5 #include <linux/interrupt.h>
6 #include <linux/slab.h>
7 #include <linux/random.h>
8 #include <linux/init.h>
9 #include <linux/kernel_stat.h>
10 #include <linux/sysdev.h>
11 #include <linux/bitops.h>
13 #include <linux/delay.h>
15 #include <asm/atomic.h>
16 #include <asm/system.h>
17 #include <asm/timer.h>
18 #include <asm/pgtable.h>
21 #include <asm/arch_hooks.h>
22 #include <asm/i8259.h>
23 #include <asm/traps.h>
27 * Note that on a 486, we don't want to do a SIGFPE on an irq13
28 * as the irq is unreliable, and exception 16 works correctly
29 * (ie as explained in the intel literature). On a 386, you
30 * can't use exception 16 due to bad IBM design, so we have to
31 * rely on the less exact irq13.
33 * Careful.. Not only is IRQ13 unreliable, but it is also
34 * leads to races. IBM designers who came up with it should
38 static irqreturn_t
math_error_irq(int cpl
, void *dev_id
)
41 if (ignore_fpu_irq
|| !boot_cpu_data
.hard_math
)
43 math_error((void __user
*)get_irq_regs()->ip
);
48 * New motherboards sometimes make IRQ 13 be a PCI interrupt,
49 * so allow interrupt sharing.
51 static struct irqaction fpu_irq
= {
52 .handler
= math_error_irq
,
53 .mask
= CPU_MASK_NONE
,
57 void __init
init_ISA_irqs(void)
61 #ifdef CONFIG_X86_LOCAL_APIC
67 * 16 old-style INTA-cycle interrupts:
69 for (i
= 0; i
< NR_IRQS_LEGACY
; i
++) {
70 struct irq_desc
*desc
= irq_to_desc(i
);
72 desc
->status
= IRQ_DISABLED
;
76 set_irq_chip_and_handler_name(i
, &i8259A_chip
,
77 handle_level_irq
, "XT");
81 DEFINE_PER_CPU(vector_irq_t
, vector_irq
) = {
82 [0 ... IRQ0_VECTOR
- 1] = -1,
99 [IRQ15_VECTOR
+ 1 ... NR_VECTORS
- 1] = -1
102 int vector_used_by_percpu_irq(unsigned int vector
)
106 for_each_online_cpu(cpu
) {
107 if (per_cpu(vector_irq
, cpu
)[vector
] != -1)
114 /* Overridden in paravirt.c */
115 void init_IRQ(void) __attribute__((weak
, alias("native_init_IRQ")));
117 void __init
native_init_IRQ(void)
121 /* all the set up before the call gates are initialised */
122 pre_intr_init_hook();
125 * Cover the whole vector space, no vector can escape
126 * us. (some of these will be overridden and become
127 * 'special' SMP interrupts)
129 for (i
= FIRST_EXTERNAL_VECTOR
; i
< NR_VECTORS
; i
++) {
130 /* SYSCALL_VECTOR was reserved in trap_init. */
131 if (i
!= SYSCALL_VECTOR
)
132 set_intr_gate(i
, interrupt
[i
-FIRST_EXTERNAL_VECTOR
]);
136 #if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_SMP)
138 * The reschedule interrupt is a CPU-to-CPU reschedule-helper
139 * IPI, driven by wakeup.
141 alloc_intr_gate(RESCHEDULE_VECTOR
, reschedule_interrupt
);
143 /* IPIs for invalidation */
144 alloc_intr_gate(INVALIDATE_TLB_VECTOR_START
+0, invalidate_interrupt0
);
145 alloc_intr_gate(INVALIDATE_TLB_VECTOR_START
+1, invalidate_interrupt1
);
146 alloc_intr_gate(INVALIDATE_TLB_VECTOR_START
+2, invalidate_interrupt2
);
147 alloc_intr_gate(INVALIDATE_TLB_VECTOR_START
+3, invalidate_interrupt3
);
148 alloc_intr_gate(INVALIDATE_TLB_VECTOR_START
+4, invalidate_interrupt4
);
149 alloc_intr_gate(INVALIDATE_TLB_VECTOR_START
+5, invalidate_interrupt5
);
150 alloc_intr_gate(INVALIDATE_TLB_VECTOR_START
+6, invalidate_interrupt6
);
151 alloc_intr_gate(INVALIDATE_TLB_VECTOR_START
+7, invalidate_interrupt7
);
153 /* IPI for generic function call */
154 alloc_intr_gate(CALL_FUNCTION_VECTOR
, call_function_interrupt
);
156 /* IPI for single call function */
157 alloc_intr_gate(CALL_FUNCTION_SINGLE_VECTOR
,
158 call_function_single_interrupt
);
160 /* Low priority IPI to cleanup after moving an irq */
161 set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR
, irq_move_cleanup_interrupt
);
162 set_bit(IRQ_MOVE_CLEANUP_VECTOR
, used_vectors
);
165 #ifdef CONFIG_X86_LOCAL_APIC
166 /* self generated IPI for local APIC timer */
167 alloc_intr_gate(LOCAL_TIMER_VECTOR
, apic_timer_interrupt
);
169 /* IPI vectors for APIC spurious and error interrupts */
170 alloc_intr_gate(SPURIOUS_APIC_VECTOR
, spurious_interrupt
);
171 alloc_intr_gate(ERROR_APIC_VECTOR
, error_interrupt
);
174 #if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_MCE_P4THERMAL)
175 /* thermal monitor LVT interrupt */
176 alloc_intr_gate(THERMAL_APIC_VECTOR
, thermal_interrupt
);
179 /* setup after call gates are initialised (usually add in
180 * the architecture specific gates)
185 * External FPU? Set up irq13 if so, for
186 * original braindamaged IBM FERR coupling.
188 if (boot_cpu_data
.hard_math
&& !cpu_has_fpu
)
189 setup_irq(FPU_IRQ
, &fpu_irq
);
191 irq_ctx_init(smp_processor_id());