2 * Sun3 i82586 Ethernet driver
4 * Cloned from ni52.c for the Sun3 by Sam Creasey (sammy@sammy.net)
6 * Original copyright follows:
7 * --------------------------
9 * net-3-driver for the NI5210 card (i82586 Ethernet chip)
11 * This is an extension to the Linux operating system, and is covered by the
12 * same Gnu Public License that covers that work.
14 * Alphacode 0.82 (96/09/29) for Linux 2.0.0 (or later)
15 * Copyrights (c) 1994,1995,1996 by M.Hipp (hippm@informatik.uni-tuebingen.de)
16 * --------------------------
18 * Consult ni52.c for further notes from the original driver.
20 * This incarnation currently supports the OBIO version of the i82586 chip
21 * used in certain sun3 models. It should be fairly doable to expand this
22 * to support VME if I should every acquire such a board.
26 static int debuglevel
= 0; /* debug-printk 0: off 1: a few 2: more */
27 static int automatic_resume
= 0; /* experimental .. better should be zero */
28 static int rfdadd
= 0; /* rfdadd=1 may be better for 8K MEM cards */
29 static int fifo
=0x8; /* don't change */
31 #include <linux/module.h>
32 #include <linux/kernel.h>
33 #include <linux/string.h>
34 #include <linux/errno.h>
35 #include <linux/ioport.h>
36 #include <linux/slab.h>
37 #include <linux/interrupt.h>
38 #include <linux/delay.h>
39 #include <linux/init.h>
40 #include <linux/bitops.h>
42 #include <asm/idprom.h>
43 #include <asm/machines.h>
44 #include <asm/sun3mmu.h>
46 #include <asm/byteorder.h>
48 #include <linux/netdevice.h>
49 #include <linux/etherdevice.h>
50 #include <linux/skbuff.h>
52 #include "sun3_82586.h"
54 #define DRV_NAME "sun3_82586"
56 #define DEBUG /* debug on */
57 #define SYSBUSVAL 0 /* 16 Bit */
58 #define SUN3_82586_TOTAL_SIZE PAGE_SIZE
60 #define sun3_attn586() {*(volatile unsigned char *)(dev->base_addr) |= IEOB_ATTEN; *(volatile unsigned char *)(dev->base_addr) &= ~IEOB_ATTEN;}
61 #define sun3_reset586() {*(volatile unsigned char *)(dev->base_addr) = 0; udelay(100); *(volatile unsigned char *)(dev->base_addr) = IEOB_NORSET;}
62 #define sun3_disint() {*(volatile unsigned char *)(dev->base_addr) &= ~IEOB_IENAB;}
63 #define sun3_enaint() {*(volatile unsigned char *)(dev->base_addr) |= IEOB_IENAB;}
64 #define sun3_active() {*(volatile unsigned char *)(dev->base_addr) |= (IEOB_IENAB|IEOB_ONAIR|IEOB_NORSET);}
66 #define make32(ptr16) (p->memtop + (swab16((unsigned short) (ptr16))) )
67 #define make24(ptr32) (char *)swab32(( ((unsigned long) (ptr32)) - p->base))
68 #define make16(ptr32) (swab16((unsigned short) ((unsigned long)(ptr32) - (unsigned long) p->memtop )))
70 /******************* how to calculate the buffers *****************************
72 * IMPORTANT NOTE: if you configure only one NUM_XMIT_BUFFS, the driver works
73 * --------------- in a different (more stable?) mode. Only in this mode it's
74 * possible to configure the driver with 'NO_NOPCOMMANDS'
76 sizeof(scp)=12; sizeof(scb)=16; sizeof(iscp)=8;
77 sizeof(scp)+sizeof(iscp)+sizeof(scb) = 36 = INIT
78 sizeof(rfd) = 24; sizeof(rbd) = 12;
79 sizeof(tbd) = 8; sizeof(transmit_cmd) = 16;
82 * if you don't know the driver, better do not change these values: */
84 #define RECV_BUFF_SIZE 1536 /* slightly oversized */
85 #define XMIT_BUFF_SIZE 1536 /* slightly oversized */
86 #define NUM_XMIT_BUFFS 1 /* config for 32K shmem */
87 #define NUM_RECV_BUFFS_8 4 /* config for 32K shared mem */
88 #define NUM_RECV_BUFFS_16 9 /* config for 32K shared mem */
89 #define NUM_RECV_BUFFS_32 16 /* config for 32K shared mem */
90 #define NO_NOPCOMMANDS /* only possible with NUM_XMIT_BUFFS=1 */
92 /**************************************************************************/
94 /* different DELAYs */
95 #define DELAY(x) mdelay(32 * x);
96 #define DELAY_16(); { udelay(16); }
97 #define DELAY_18(); { udelay(4); }
99 /* wait for command with timeout: */
100 #define WAIT_4_SCB_CMD() \
102 for(i=0;i<16384;i++) { \
103 if(!p->scb->cmd_cuc) break; \
106 printk("%s: scb_cmd timed out: %04x,%04x .. disabling i82586!!\n",dev->name,p->scb->cmd_cuc,p->scb->cus); \
107 if(!p->reseted) { p->reseted = 1; sun3_reset586(); } } } }
109 #define WAIT_4_SCB_CMD_RUC() { int i; \
110 for(i=0;i<16384;i++) { \
111 if(!p->scb->cmd_ruc) break; \
114 printk("%s: scb_cmd (ruc) timed out: %04x,%04x .. disabling i82586!!\n",dev->name,p->scb->cmd_ruc,p->scb->rus); \
115 if(!p->reseted) { p->reseted = 1; sun3_reset586(); } } } }
117 #define WAIT_4_STAT_COMPL(addr) { int i; \
118 for(i=0;i<32767;i++) { \
119 if(swab16((addr)->cmd_status) & STAT_COMPL) break; \
120 DELAY_16(); DELAY_16(); } }
122 static int sun3_82586_probe1(struct net_device
*dev
,int ioaddr
);
123 static irqreturn_t
sun3_82586_interrupt(int irq
,void *dev_id
);
124 static int sun3_82586_open(struct net_device
*dev
);
125 static int sun3_82586_close(struct net_device
*dev
);
126 static int sun3_82586_send_packet(struct sk_buff
*,struct net_device
*);
127 static struct net_device_stats
*sun3_82586_get_stats(struct net_device
*dev
);
128 static void set_multicast_list(struct net_device
*dev
);
129 static void sun3_82586_timeout(struct net_device
*dev
);
131 static void sun3_82586_dump(struct net_device
*,void *);
134 /* helper-functions */
135 static int init586(struct net_device
*dev
);
136 static int check586(struct net_device
*dev
,char *where
,unsigned size
);
137 static void alloc586(struct net_device
*dev
);
138 static void startrecv586(struct net_device
*dev
);
139 static void *alloc_rfa(struct net_device
*dev
,void *ptr
);
140 static void sun3_82586_rcv_int(struct net_device
*dev
);
141 static void sun3_82586_xmt_int(struct net_device
*dev
);
142 static void sun3_82586_rnr_int(struct net_device
*dev
);
146 struct net_device_stats stats
;
151 volatile struct rfd_struct
*rfd_last
,*rfd_top
,*rfd_first
;
152 volatile struct scp_struct
*scp
; /* volatile is important */
153 volatile struct iscp_struct
*iscp
; /* volatile is important */
154 volatile struct scb_struct
*scb
; /* volatile is important */
155 volatile struct tbd_struct
*xmit_buffs
[NUM_XMIT_BUFFS
];
156 volatile struct transmit_cmd_struct
*xmit_cmds
[NUM_XMIT_BUFFS
];
157 #if (NUM_XMIT_BUFFS == 1)
158 volatile struct nop_cmd_struct
*nop_cmds
[2];
160 volatile struct nop_cmd_struct
*nop_cmds
[NUM_XMIT_BUFFS
];
162 volatile int nop_point
,num_recv_buffs
;
163 volatile char *xmit_cbuffs
[NUM_XMIT_BUFFS
];
164 volatile int xmit_count
,xmit_last
;
167 /**********************************************
170 static int sun3_82586_close(struct net_device
*dev
)
172 free_irq(dev
->irq
, dev
);
174 sun3_reset586(); /* the hard way to stop the receiver */
176 netif_stop_queue(dev
);
181 /**********************************************
184 static int sun3_82586_open(struct net_device
*dev
)
194 ret
= request_irq(dev
->irq
, &sun3_82586_interrupt
,0,dev
->name
,dev
);
201 netif_start_queue(dev
);
203 return 0; /* most done by init */
206 /**********************************************
207 * Check to see if there's an 82586 out there.
209 static int check586(struct net_device
*dev
,char *where
,unsigned size
)
212 struct priv
*p
= /* (struct priv *) dev->priv*/ &pb
;
216 p
->base
= (unsigned long) dvma_btov(0);
217 p
->memtop
= (char *)dvma_btov((unsigned long)where
);
218 p
->scp
= (struct scp_struct
*)(p
->base
+ SCP_DEFAULT_ADDRESS
);
219 memset((char *)p
->scp
,0, sizeof(struct scp_struct
));
220 for(i
=0;i
<sizeof(struct scp_struct
);i
++) /* memory was writeable? */
221 if(((char *)p
->scp
)[i
])
223 p
->scp
->sysbus
= SYSBUSVAL
; /* 1 = 8Bit-Bus, 0 = 16 Bit */
224 if(p
->scp
->sysbus
!= SYSBUSVAL
)
227 iscp_addr
= (char *)dvma_btov((unsigned long)where
);
229 p
->iscp
= (struct iscp_struct
*) iscp_addr
;
230 memset((char *)p
->iscp
,0, sizeof(struct iscp_struct
));
232 p
->scp
->iscp
= make24(p
->iscp
);
237 DELAY(1); /* wait a while... */
239 if(p
->iscp
->busy
) /* i82586 clears 'busy' after successful init */
245 /******************************************************************
246 * set iscp at the right place, called by sun3_82586_probe1 and open586.
248 static void alloc586(struct net_device
*dev
)
250 struct priv
*p
= netdev_priv(dev
);
255 p
->scp
= (struct scp_struct
*) (p
->base
+ SCP_DEFAULT_ADDRESS
);
256 p
->iscp
= (struct iscp_struct
*) dvma_btov(dev
->mem_start
);
257 p
->scb
= (struct scb_struct
*) ((char *)p
->iscp
+ sizeof(struct iscp_struct
));
259 memset((char *) p
->iscp
,0,sizeof(struct iscp_struct
));
260 memset((char *) p
->scp
,0,sizeof(struct scp_struct
));
262 p
->scp
->iscp
= make24(p
->iscp
);
263 p
->scp
->sysbus
= SYSBUSVAL
;
264 p
->iscp
->scb_offset
= make16(p
->scb
);
265 p
->iscp
->scb_base
= make24(dvma_btov(dev
->mem_start
));
274 printk("%s: Init-Problems (alloc).\n",dev
->name
);
278 memset((char *)p
->scb
,0,sizeof(struct scb_struct
));
281 struct net_device
* __init
sun3_82586_probe(int unit
)
283 struct net_device
*dev
;
284 unsigned long ioaddr
;
285 static int found
= 0;
288 /* check that this machine has an onboard 82586 */
289 switch(idprom
->id_machtype
) {
290 case SM_SUN3
|SM_3_160
:
291 case SM_SUN3
|SM_3_260
:
292 /* these machines have 82586 */
296 return ERR_PTR(-ENODEV
);
300 return ERR_PTR(-ENODEV
);
302 ioaddr
= (unsigned long)ioremap(IE_OBIO
, SUN3_82586_TOTAL_SIZE
);
304 return ERR_PTR(-ENOMEM
);
307 dev
= alloc_etherdev(sizeof(struct priv
));
311 sprintf(dev
->name
, "eth%d", unit
);
312 netdev_boot_setup_check(dev
);
316 dev
->base_addr
= ioaddr
;
317 err
= sun3_82586_probe1(dev
, ioaddr
);
320 err
= register_netdev(dev
);
326 release_region(ioaddr
, SUN3_82586_TOTAL_SIZE
);
330 iounmap((void __iomem
*)ioaddr
);
334 static int __init
sun3_82586_probe1(struct net_device
*dev
,int ioaddr
)
338 if (!request_region(ioaddr
, SUN3_82586_TOTAL_SIZE
, DRV_NAME
))
341 /* copy in the ethernet address from the prom */
342 for(i
= 0; i
< 6 ; i
++)
343 dev
->dev_addr
[i
] = idprom
->id_ethaddr
[i
];
345 printk("%s: SUN3 Intel 82586 found at %lx, ",dev
->name
,dev
->base_addr
);
348 * check (or search) IO-Memory, 32K
352 dev
->mem_start
= (unsigned long)dvma_malloc_align(0x8000, 0x1000);
353 dev
->mem_end
= dev
->mem_start
+ size
;
355 if(size
!= 0x2000 && size
!= 0x4000 && size
!= 0x8000) {
356 printk("\n%s: Illegal memory size %d. Allowed is 0x2000 or 0x4000 or 0x8000 bytes.\n",dev
->name
,size
);
360 if(!check586(dev
,(char *) dev
->mem_start
,size
)) {
361 printk("?memcheck, Can't find memory at 0x%lx with size %d!\n",dev
->mem_start
,size
);
366 ((struct priv
*)netdev_priv(dev
))->memtop
=
367 (char *)dvma_btov(dev
->mem_start
);
368 ((struct priv
*)netdev_priv(dev
))->base
= (unsigned long) dvma_btov(0);
371 /* set number of receive-buffs according to memsize */
373 ((struct priv
*)netdev_priv(dev
))->num_recv_buffs
=
375 else if(size
== 0x4000)
376 ((struct priv
*)netdev_priv(dev
))->num_recv_buffs
=
379 ((struct priv
*)netdev_priv(dev
))->num_recv_buffs
=
382 printk("Memaddr: 0x%lx, Memsize: %d, IRQ %d\n",dev
->mem_start
,size
, dev
->irq
);
384 dev
->open
= sun3_82586_open
;
385 dev
->stop
= sun3_82586_close
;
386 dev
->get_stats
= sun3_82586_get_stats
;
387 dev
->tx_timeout
= sun3_82586_timeout
;
388 dev
->watchdog_timeo
= HZ
/20;
389 dev
->hard_start_xmit
= sun3_82586_send_packet
;
390 dev
->set_multicast_list
= set_multicast_list
;
395 release_region(ioaddr
, SUN3_82586_TOTAL_SIZE
);
400 static int init586(struct net_device
*dev
)
404 struct priv
*p
= netdev_priv(dev
);
405 volatile struct configure_cmd_struct
*cfg_cmd
;
406 volatile struct iasetup_cmd_struct
*ias_cmd
;
407 volatile struct tdr_cmd_struct
*tdr_cmd
;
408 volatile struct mcsetup_cmd_struct
*mc_cmd
;
409 struct dev_mc_list
*dmi
=dev
->mc_list
;
410 int num_addrs
=dev
->mc_count
;
412 ptr
= (void *) ((char *)p
->scb
+ sizeof(struct scb_struct
));
414 cfg_cmd
= (struct configure_cmd_struct
*)ptr
; /* configure-command */
415 cfg_cmd
->cmd_status
= 0;
416 cfg_cmd
->cmd_cmd
= swab16(CMD_CONFIGURE
| CMD_LAST
);
417 cfg_cmd
->cmd_link
= 0xffff;
419 cfg_cmd
->byte_cnt
= 0x0a; /* number of cfg bytes */
420 cfg_cmd
->fifo
= fifo
; /* fifo-limit (8=tx:32/rx:64) */
421 cfg_cmd
->sav_bf
= 0x40; /* hold or discard bad recv frames (bit 7) */
422 cfg_cmd
->adr_len
= 0x2e; /* addr_len |!src_insert |pre-len |loopback */
423 cfg_cmd
->priority
= 0x00;
425 cfg_cmd
->time_low
= 0x00;
426 cfg_cmd
->time_high
= 0xf2;
427 cfg_cmd
->promisc
= 0;
428 if(dev
->flags
& IFF_ALLMULTI
) {
429 int len
= ((char *) p
->iscp
- (char *) ptr
- 8) / 6;
430 if(num_addrs
> len
) {
431 printk("%s: switching to promisc. mode\n",dev
->name
);
432 cfg_cmd
->promisc
= 1;
435 if(dev
->flags
&IFF_PROMISC
)
436 cfg_cmd
->promisc
= 1;
437 cfg_cmd
->carr_coll
= 0x00;
439 p
->scb
->cbl_offset
= make16(cfg_cmd
);
442 p
->scb
->cmd_cuc
= CUC_START
; /* cmd.-unit start */
445 WAIT_4_STAT_COMPL(cfg_cmd
);
447 if((swab16(cfg_cmd
->cmd_status
) & (STAT_OK
|STAT_COMPL
)) != (STAT_COMPL
|STAT_OK
))
449 printk("%s: configure command failed: %x\n",dev
->name
,swab16(cfg_cmd
->cmd_status
));
454 * individual address setup
457 ias_cmd
= (struct iasetup_cmd_struct
*)ptr
;
459 ias_cmd
->cmd_status
= 0;
460 ias_cmd
->cmd_cmd
= swab16(CMD_IASETUP
| CMD_LAST
);
461 ias_cmd
->cmd_link
= 0xffff;
463 memcpy((char *)&ias_cmd
->iaddr
,(char *) dev
->dev_addr
,ETH_ALEN
);
465 p
->scb
->cbl_offset
= make16(ias_cmd
);
467 p
->scb
->cmd_cuc
= CUC_START
; /* cmd.-unit start */
470 WAIT_4_STAT_COMPL(ias_cmd
);
472 if((swab16(ias_cmd
->cmd_status
) & (STAT_OK
|STAT_COMPL
)) != (STAT_OK
|STAT_COMPL
)) {
473 printk("%s (82586): individual address setup command failed: %04x\n",dev
->name
,swab16(ias_cmd
->cmd_status
));
478 * TDR, wire check .. e.g. no resistor e.t.c
481 tdr_cmd
= (struct tdr_cmd_struct
*)ptr
;
483 tdr_cmd
->cmd_status
= 0;
484 tdr_cmd
->cmd_cmd
= swab16(CMD_TDR
| CMD_LAST
);
485 tdr_cmd
->cmd_link
= 0xffff;
488 p
->scb
->cbl_offset
= make16(tdr_cmd
);
489 p
->scb
->cmd_cuc
= CUC_START
; /* cmd.-unit start */
492 WAIT_4_STAT_COMPL(tdr_cmd
);
494 if(!(swab16(tdr_cmd
->cmd_status
) & STAT_COMPL
))
496 printk("%s: Problems while running the TDR.\n",dev
->name
);
500 DELAY_16(); /* wait for result */
501 result
= swab16(tdr_cmd
->status
);
503 p
->scb
->cmd_cuc
= p
->scb
->cus
& STAT_MASK
;
504 sun3_attn586(); /* ack the interrupts */
506 if(result
& TDR_LNK_OK
)
508 else if(result
& TDR_XCVR_PRB
)
509 printk("%s: TDR: Transceiver problem. Check the cable(s)!\n",dev
->name
);
510 else if(result
& TDR_ET_OPN
)
511 printk("%s: TDR: No correct termination %d clocks away.\n",dev
->name
,result
& TDR_TIMEMASK
);
512 else if(result
& TDR_ET_SRT
)
514 if (result
& TDR_TIMEMASK
) /* time == 0 -> strange :-) */
515 printk("%s: TDR: Detected a short circuit %d clocks away.\n",dev
->name
,result
& TDR_TIMEMASK
);
518 printk("%s: TDR: Unknown status %04x\n",dev
->name
,result
);
524 if(num_addrs
&& !(dev
->flags
& IFF_PROMISC
) )
526 mc_cmd
= (struct mcsetup_cmd_struct
*) ptr
;
527 mc_cmd
->cmd_status
= 0;
528 mc_cmd
->cmd_cmd
= swab16(CMD_MCSETUP
| CMD_LAST
);
529 mc_cmd
->cmd_link
= 0xffff;
530 mc_cmd
->mc_cnt
= swab16(num_addrs
* 6);
532 for(i
=0;i
<num_addrs
;i
++,dmi
=dmi
->next
)
533 memcpy((char *) mc_cmd
->mc_list
[i
], dmi
->dmi_addr
,6);
535 p
->scb
->cbl_offset
= make16(mc_cmd
);
536 p
->scb
->cmd_cuc
= CUC_START
;
539 WAIT_4_STAT_COMPL(mc_cmd
);
541 if( (swab16(mc_cmd
->cmd_status
) & (STAT_COMPL
|STAT_OK
)) != (STAT_COMPL
|STAT_OK
) )
542 printk("%s: Can't apply multicast-address-list.\n",dev
->name
);
546 * alloc nop/xmit-cmds
548 #if (NUM_XMIT_BUFFS == 1)
551 p
->nop_cmds
[i
] = (struct nop_cmd_struct
*)ptr
;
552 p
->nop_cmds
[i
]->cmd_cmd
= swab16(CMD_NOP
);
553 p
->nop_cmds
[i
]->cmd_status
= 0;
554 p
->nop_cmds
[i
]->cmd_link
= make16((p
->nop_cmds
[i
]));
555 ptr
= (char *) ptr
+ sizeof(struct nop_cmd_struct
);
558 for(i
=0;i
<NUM_XMIT_BUFFS
;i
++)
560 p
->nop_cmds
[i
] = (struct nop_cmd_struct
*)ptr
;
561 p
->nop_cmds
[i
]->cmd_cmd
= swab16(CMD_NOP
);
562 p
->nop_cmds
[i
]->cmd_status
= 0;
563 p
->nop_cmds
[i
]->cmd_link
= make16((p
->nop_cmds
[i
]));
564 ptr
= (char *) ptr
+ sizeof(struct nop_cmd_struct
);
568 ptr
= alloc_rfa(dev
,(void *)ptr
); /* init receive-frame-area */
571 * alloc xmit-buffs / init xmit_cmds
573 for(i
=0;i
<NUM_XMIT_BUFFS
;i
++)
575 p
->xmit_cmds
[i
] = (struct transmit_cmd_struct
*)ptr
; /*transmit cmd/buff 0*/
576 ptr
= (char *) ptr
+ sizeof(struct transmit_cmd_struct
);
577 p
->xmit_cbuffs
[i
] = (char *)ptr
; /* char-buffs */
578 ptr
= (char *) ptr
+ XMIT_BUFF_SIZE
;
579 p
->xmit_buffs
[i
] = (struct tbd_struct
*)ptr
; /* TBD */
580 ptr
= (char *) ptr
+ sizeof(struct tbd_struct
);
581 if((void *)ptr
> (void *)dev
->mem_end
)
583 printk("%s: not enough shared-mem for your configuration!\n",dev
->name
);
586 memset((char *)(p
->xmit_cmds
[i
]) ,0, sizeof(struct transmit_cmd_struct
));
587 memset((char *)(p
->xmit_buffs
[i
]),0, sizeof(struct tbd_struct
));
588 p
->xmit_cmds
[i
]->cmd_link
= make16(p
->nop_cmds
[(i
+1)%NUM_XMIT_BUFFS
]);
589 p
->xmit_cmds
[i
]->cmd_status
= swab16(STAT_COMPL
);
590 p
->xmit_cmds
[i
]->cmd_cmd
= swab16(CMD_XMIT
| CMD_INT
);
591 p
->xmit_cmds
[i
]->tbd_offset
= make16((p
->xmit_buffs
[i
]));
592 p
->xmit_buffs
[i
]->next
= 0xffff;
593 p
->xmit_buffs
[i
]->buffer
= make24((p
->xmit_cbuffs
[i
]));
598 #ifndef NO_NOPCOMMANDS
603 * 'start transmitter'
605 #ifndef NO_NOPCOMMANDS
606 p
->scb
->cbl_offset
= make16(p
->nop_cmds
[0]);
607 p
->scb
->cmd_cuc
= CUC_START
;
611 p
->xmit_cmds
[0]->cmd_link
= make16(p
->xmit_cmds
[0]);
612 p
->xmit_cmds
[0]->cmd_cmd
= swab16(CMD_XMIT
| CMD_SUSPEND
| CMD_INT
);
618 p
->scb
->cmd_cuc
= p
->scb
->cus
& STAT_MASK
;
628 /******************************************************
629 * This is a helper routine for sun3_82586_rnr_int() and init586().
630 * It sets up the Receive Frame Area (RFA).
633 static void *alloc_rfa(struct net_device
*dev
,void *ptr
)
635 volatile struct rfd_struct
*rfd
= (struct rfd_struct
*)ptr
;
636 volatile struct rbd_struct
*rbd
;
638 struct priv
*p
= netdev_priv(dev
);
640 memset((char *) rfd
,0,sizeof(struct rfd_struct
)*(p
->num_recv_buffs
+rfdadd
));
643 for(i
= 0; i
< (p
->num_recv_buffs
+rfdadd
); i
++) {
644 rfd
[i
].next
= make16(rfd
+ (i
+1) % (p
->num_recv_buffs
+rfdadd
) );
645 rfd
[i
].rbd_offset
= 0xffff;
647 rfd
[p
->num_recv_buffs
-1+rfdadd
].last
= RFD_SUSP
; /* RU suspend */
649 ptr
= (void *) (rfd
+ (p
->num_recv_buffs
+ rfdadd
) );
651 rbd
= (struct rbd_struct
*) ptr
;
652 ptr
= (void *) (rbd
+ p
->num_recv_buffs
);
654 /* clr descriptors */
655 memset((char *) rbd
,0,sizeof(struct rbd_struct
)*(p
->num_recv_buffs
));
657 for(i
=0;i
<p
->num_recv_buffs
;i
++)
659 rbd
[i
].next
= make16((rbd
+ (i
+1) % p
->num_recv_buffs
));
660 rbd
[i
].size
= swab16(RECV_BUFF_SIZE
);
661 rbd
[i
].buffer
= make24(ptr
);
662 ptr
= (char *) ptr
+ RECV_BUFF_SIZE
;
665 p
->rfd_top
= p
->rfd_first
;
666 p
->rfd_last
= p
->rfd_first
+ (p
->num_recv_buffs
- 1 + rfdadd
);
668 p
->scb
->rfa_offset
= make16(p
->rfd_first
);
669 p
->rfd_first
->rbd_offset
= make16(rbd
);
675 /**************************************************
676 * Interrupt Handler ...
679 static irqreturn_t
sun3_82586_interrupt(int irq
,void *dev_id
)
681 struct net_device
*dev
= dev_id
;
687 printk ("sun3_82586-interrupt: irq %d for unknown device.\n",irq
);
690 p
= netdev_priv(dev
);
695 WAIT_4_SCB_CMD(); /* wait for last command */
697 while((stat
=p
->scb
->cus
& STAT_MASK
))
699 p
->scb
->cmd_cuc
= stat
;
702 if(stat
& STAT_FR
) /* received a frame */
703 sun3_82586_rcv_int(dev
);
705 if(stat
& STAT_RNR
) /* RU went 'not ready' */
708 if(p
->scb
->rus
& RU_SUSPEND
) /* special case: RU_SUSPEND */
711 p
->scb
->cmd_ruc
= RUC_RESUME
;
713 WAIT_4_SCB_CMD_RUC();
717 printk("%s: Receiver-Unit went 'NOT READY': %04x/%02x.\n",dev
->name
,(int) stat
,(int) p
->scb
->rus
);
718 sun3_82586_rnr_int(dev
);
722 if(stat
& STAT_CX
) /* command with I-bit set complete */
723 sun3_82586_xmt_int(dev
);
725 #ifndef NO_NOPCOMMANDS
726 if(stat
& STAT_CNA
) /* CU went 'not ready' */
728 if(netif_running(dev
))
729 printk("%s: oops! CU has left active state. stat: %04x/%02x.\n",dev
->name
,(int) stat
,(int) p
->scb
->cus
);
736 WAIT_4_SCB_CMD(); /* wait for ack. (sun3_82586_xmt_int can be faster than ack!!) */
737 if(p
->scb
->cmd_cuc
) /* timed out? */
739 printk("%s: Acknowledge timed out.\n",dev
->name
);
750 /*******************************************************
754 static void sun3_82586_rcv_int(struct net_device
*dev
)
757 unsigned short totlen
;
759 struct rbd_struct
*rbd
;
760 struct priv
*p
= netdev_priv(dev
);
765 for(;(status
= p
->rfd_top
->stat_high
) & RFD_COMPL
;)
767 rbd
= (struct rbd_struct
*) make32(p
->rfd_top
->rbd_offset
);
769 if(status
& RFD_OK
) /* frame received without error? */
771 if( (totlen
= swab16(rbd
->status
)) & RBD_LAST
) /* the first and the last buffer? */
773 totlen
&= RBD_MASK
; /* length of this frame */
775 skb
= (struct sk_buff
*) dev_alloc_skb(totlen
+2);
780 skb_copy_to_linear_data(skb
,(char *) p
->base
+swab32((unsigned long) rbd
->buffer
),totlen
);
781 skb
->protocol
=eth_type_trans(skb
,dev
);
783 p
->stats
.rx_packets
++;
786 p
->stats
.rx_dropped
++;
791 /* free all RBD's until RBD_LAST is set */
793 while(!((rstat
=swab16(rbd
->status
)) & RBD_LAST
))
795 totlen
+= rstat
& RBD_MASK
;
798 printk("%s: Whoops .. no end mark in RBD list\n",dev
->name
);
802 rbd
= (struct rbd_struct
*) make32(rbd
->next
);
804 totlen
+= rstat
& RBD_MASK
;
806 printk("%s: received oversized frame! length: %d\n",dev
->name
,totlen
);
807 p
->stats
.rx_dropped
++;
810 else /* frame !(ok), only with 'save-bad-frames' */
812 printk("%s: oops! rfd-error-status: %04x\n",dev
->name
,status
);
813 p
->stats
.rx_errors
++;
815 p
->rfd_top
->stat_high
= 0;
816 p
->rfd_top
->last
= RFD_SUSP
; /* maybe exchange by RFD_LAST */
817 p
->rfd_top
->rbd_offset
= 0xffff;
818 p
->rfd_last
->last
= 0; /* delete RFD_SUSP */
819 p
->rfd_last
= p
->rfd_top
;
820 p
->rfd_top
= (struct rfd_struct
*) make32(p
->rfd_top
->next
); /* step to next RFD */
821 p
->scb
->rfa_offset
= make16(p
->rfd_top
);
830 p
->scb
->cmd_ruc
= RUC_RESUME
;
832 WAIT_4_SCB_CMD_RUC();
840 if(p
->rfd_top
->status
)
844 printk("%s: RU hasn't fetched next RFD (not busy/complete)\n",dev
->name
);
853 volatile struct rfd_struct
*rfds
=p
->rfd_top
;
854 volatile struct rbd_struct
*rbds
;
855 printk("%s: received a FC intr. without having a frame: %04x %d\n",dev
->name
,status
,old_at_least
);
856 for(i
=0;i
< (p
->num_recv_buffs
+4);i
++)
858 rbds
= (struct rbd_struct
*) make32(rfds
->rbd_offset
);
859 printk("%04x:%04x ",rfds
->status
,rbds
->status
);
860 rfds
= (struct rfd_struct
*) make32(rfds
->next
);
862 printk("\nerrs: %04x %04x stat: %04x\n",(int)p
->scb
->rsc_errs
,(int)p
->scb
->ovrn_errs
,(int)p
->scb
->status
);
863 printk("\nerrs: %04x %04x rus: %02x, cus: %02x\n",(int)p
->scb
->rsc_errs
,(int)p
->scb
->ovrn_errs
,(int)p
->scb
->rus
,(int)p
->scb
->cus
);
865 old_at_least
= at_least_one
;
872 /**********************************************************
873 * handle 'Receiver went not ready'.
876 static void sun3_82586_rnr_int(struct net_device
*dev
)
878 struct priv
*p
= netdev_priv(dev
);
880 p
->stats
.rx_errors
++;
882 WAIT_4_SCB_CMD(); /* wait for the last cmd, WAIT_4_FULLSTAT?? */
883 p
->scb
->cmd_ruc
= RUC_ABORT
; /* usually the RU is in the 'no resource'-state .. abort it now. */
885 WAIT_4_SCB_CMD_RUC(); /* wait for accept cmd. */
887 alloc_rfa(dev
,(char *)p
->rfd_first
);
888 /* maybe add a check here, before restarting the RU */
889 startrecv586(dev
); /* restart RU */
891 printk("%s: Receive-Unit restarted. Status: %04x\n",dev
->name
,p
->scb
->rus
);
895 /**********************************************************
896 * handle xmit - interrupt
899 static void sun3_82586_xmt_int(struct net_device
*dev
)
902 struct priv
*p
= netdev_priv(dev
);
907 status
= swab16(p
->xmit_cmds
[p
->xmit_last
]->cmd_status
);
908 if(!(status
& STAT_COMPL
))
909 printk("%s: strange .. xmit-int without a 'COMPLETE'\n",dev
->name
);
913 p
->stats
.tx_packets
++;
914 p
->stats
.collisions
+= (status
& TCMD_MAXCOLLMASK
);
918 p
->stats
.tx_errors
++;
919 if(status
& TCMD_LATECOLL
) {
920 printk("%s: late collision detected.\n",dev
->name
);
921 p
->stats
.collisions
++;
923 else if(status
& TCMD_NOCARRIER
) {
924 p
->stats
.tx_carrier_errors
++;
925 printk("%s: no carrier detected.\n",dev
->name
);
927 else if(status
& TCMD_LOSTCTS
)
928 printk("%s: loss of CTS detected.\n",dev
->name
);
929 else if(status
& TCMD_UNDERRUN
) {
930 p
->stats
.tx_fifo_errors
++;
931 printk("%s: DMA underrun detected.\n",dev
->name
);
933 else if(status
& TCMD_MAXCOLL
) {
934 printk("%s: Max. collisions exceeded.\n",dev
->name
);
935 p
->stats
.collisions
+= 16;
939 #if (NUM_XMIT_BUFFS > 1)
940 if( (++p
->xmit_last
) == NUM_XMIT_BUFFS
)
943 netif_wake_queue(dev
);
946 /***********************************************************
947 * (re)start the receiver
950 static void startrecv586(struct net_device
*dev
)
952 struct priv
*p
= netdev_priv(dev
);
955 WAIT_4_SCB_CMD_RUC();
956 p
->scb
->rfa_offset
= make16(p
->rfd_first
);
957 p
->scb
->cmd_ruc
= RUC_START
;
958 sun3_attn586(); /* start cmd. */
959 WAIT_4_SCB_CMD_RUC(); /* wait for accept cmd. (no timeout!!) */
962 static void sun3_82586_timeout(struct net_device
*dev
)
964 struct priv
*p
= netdev_priv(dev
);
965 #ifndef NO_NOPCOMMANDS
966 if(p
->scb
->cus
& CU_ACTIVE
) /* COMMAND-UNIT active? */
968 netif_wake_queue(dev
);
970 printk("%s: strange ... timeout with CU active?!?\n",dev
->name
);
971 printk("%s: X0: %04x N0: %04x N1: %04x %d\n",dev
->name
,(int)swab16(p
->xmit_cmds
[0]->cmd_status
),(int)swab16(p
->nop_cmds
[0]->cmd_status
),(int)swab16(p
->nop_cmds
[1]->cmd_status
),(int)p
->nop_point
);
973 p
->scb
->cmd_cuc
= CUC_ABORT
;
976 p
->scb
->cbl_offset
= make16(p
->nop_cmds
[p
->nop_point
]);
977 p
->scb
->cmd_cuc
= CUC_START
;
980 dev
->trans_start
= jiffies
;
986 printk("%s: xmitter timed out, try to restart! stat: %02x\n",dev
->name
,p
->scb
->cus
);
987 printk("%s: command-stats: %04x %04x\n",dev
->name
,swab16(p
->xmit_cmds
[0]->cmd_status
),swab16(p
->xmit_cmds
[1]->cmd_status
));
988 printk("%s: check, whether you set the right interrupt number!\n",dev
->name
);
990 sun3_82586_close(dev
);
991 sun3_82586_open(dev
);
993 dev
->trans_start
= jiffies
;
996 /******************************************************
1000 static int sun3_82586_send_packet(struct sk_buff
*skb
, struct net_device
*dev
)
1003 #ifndef NO_NOPCOMMANDS
1006 struct priv
*p
= netdev_priv(dev
);
1008 if(skb
->len
> XMIT_BUFF_SIZE
)
1010 printk("%s: Sorry, max. framelength is %d bytes. The length of your frame is %d bytes.\n",dev
->name
,XMIT_BUFF_SIZE
,skb
->len
);
1014 netif_stop_queue(dev
);
1016 #if(NUM_XMIT_BUFFS > 1)
1017 if(test_and_set_bit(0,(void *) &p
->lock
)) {
1018 printk("%s: Queue was locked\n",dev
->name
);
1025 if (len
< ETH_ZLEN
) {
1026 memset((void *)p
->xmit_cbuffs
[p
->xmit_count
], 0,
1030 skb_copy_from_linear_data(skb
, (void *)p
->xmit_cbuffs
[p
->xmit_count
], skb
->len
);
1032 #if (NUM_XMIT_BUFFS == 1)
1033 # ifdef NO_NOPCOMMANDS
1036 if(p
->scb
->cus
& CU_ACTIVE
)
1038 printk("%s: Hmmm .. CU is still running and we wanna send a new packet.\n",dev
->name
);
1039 printk("%s: stat: %04x %04x\n",dev
->name
,p
->scb
->cus
,swab16(p
->xmit_cmds
[0]->cmd_status
));
1043 p
->xmit_buffs
[0]->size
= swab16(TBD_LAST
| len
);
1046 p
->xmit_cmds
[0]->cmd_status
= 0;
1048 if( (p
->scb
->cus
& CU_STATUS
) == CU_SUSPEND
)
1049 p
->scb
->cmd_cuc
= CUC_RESUME
;
1052 p
->scb
->cbl_offset
= make16(p
->xmit_cmds
[0]);
1053 p
->scb
->cmd_cuc
= CUC_START
;
1057 dev
->trans_start
= jiffies
;
1061 if( (p
->scb
->cus
& CU_ACTIVE
)) /* test it, because CU sometimes doesn't start immediately */
1063 if(p
->xmit_cmds
[0]->cmd_status
)
1066 printk("%s: Can't start transmit-command.\n",dev
->name
);
1069 next_nop
= (p
->nop_point
+ 1) & 0x1;
1070 p
->xmit_buffs
[0]->size
= swab16(TBD_LAST
| len
);
1072 p
->xmit_cmds
[0]->cmd_link
= p
->nop_cmds
[next_nop
]->cmd_link
1073 = make16((p
->nop_cmds
[next_nop
]));
1074 p
->xmit_cmds
[0]->cmd_status
= p
->nop_cmds
[next_nop
]->cmd_status
= 0;
1076 p
->nop_cmds
[p
->nop_point
]->cmd_link
= make16((p
->xmit_cmds
[0]));
1077 dev
->trans_start
= jiffies
;
1078 p
->nop_point
= next_nop
;
1082 p
->xmit_buffs
[p
->xmit_count
]->size
= swab16(TBD_LAST
| len
);
1083 if( (next_nop
= p
->xmit_count
+ 1) == NUM_XMIT_BUFFS
)
1086 p
->xmit_cmds
[p
->xmit_count
]->cmd_status
= 0;
1087 /* linkpointer of xmit-command already points to next nop cmd */
1088 p
->nop_cmds
[next_nop
]->cmd_link
= make16((p
->nop_cmds
[next_nop
]));
1089 p
->nop_cmds
[next_nop
]->cmd_status
= 0;
1091 p
->nop_cmds
[p
->xmit_count
]->cmd_link
= make16((p
->xmit_cmds
[p
->xmit_count
]));
1092 dev
->trans_start
= jiffies
;
1093 p
->xmit_count
= next_nop
;
1096 unsigned long flags
;
1097 local_irq_save(flags
);
1098 if(p
->xmit_count
!= p
->xmit_last
)
1099 netif_wake_queue(dev
);
1101 local_irq_restore(flags
);
1109 /*******************************************
1110 * Someone wanna have the statistics
1113 static struct net_device_stats
*sun3_82586_get_stats(struct net_device
*dev
)
1115 struct priv
*p
= netdev_priv(dev
);
1116 unsigned short crc
,aln
,rsc
,ovrn
;
1118 crc
= swab16(p
->scb
->crc_errs
); /* get error-statistic from the ni82586 */
1119 p
->scb
->crc_errs
= 0;
1120 aln
= swab16(p
->scb
->aln_errs
);
1121 p
->scb
->aln_errs
= 0;
1122 rsc
= swab16(p
->scb
->rsc_errs
);
1123 p
->scb
->rsc_errs
= 0;
1124 ovrn
= swab16(p
->scb
->ovrn_errs
);
1125 p
->scb
->ovrn_errs
= 0;
1127 p
->stats
.rx_crc_errors
+= crc
;
1128 p
->stats
.rx_fifo_errors
+= ovrn
;
1129 p
->stats
.rx_frame_errors
+= aln
;
1130 p
->stats
.rx_dropped
+= rsc
;
1135 /********************************************************
1139 static void set_multicast_list(struct net_device
*dev
)
1141 netif_stop_queue(dev
);
1147 netif_wake_queue(dev
);
1151 #error This code is not currently supported as a module
1152 static struct net_device
*dev_sun3_82586
;
1154 int init_module(void)
1156 dev_sun3_82586
= sun3_82586_probe(-1);
1157 if (IS_ERR(dev_sun3_82586
))
1158 return PTR_ERR(dev_sun3_82586
);
1162 void cleanup_module(void)
1164 unsigned long ioaddr
= dev_sun3_82586
->base_addr
;
1165 unregister_netdev(dev_sun3_82586
);
1166 release_region(ioaddr
, SUN3_82586_TOTAL_SIZE
);
1167 iounmap((void *)ioaddr
);
1168 free_netdev(dev_sun3_82586
);
1174 * DUMP .. we expect a not running CMD unit and enough space
1176 void sun3_82586_dump(struct net_device
*dev
,void *ptr
)
1178 struct priv
*p
= netdev_priv(dev
);
1179 struct dump_cmd_struct
*dump_cmd
= (struct dump_cmd_struct
*) ptr
;
1182 p
->scb
->cmd_cuc
= CUC_ABORT
;
1185 WAIT_4_SCB_CMD_RUC();
1187 dump_cmd
->cmd_status
= 0;
1188 dump_cmd
->cmd_cmd
= CMD_DUMP
| CMD_LAST
;
1189 dump_cmd
->dump_offset
= make16((dump_cmd
+ 1));
1190 dump_cmd
->cmd_link
= 0xffff;
1192 p
->scb
->cbl_offset
= make16(dump_cmd
);
1193 p
->scb
->cmd_cuc
= CUC_START
;
1195 WAIT_4_STAT_COMPL(dump_cmd
);
1197 if( (dump_cmd
->cmd_status
& (STAT_COMPL
|STAT_OK
)) != (STAT_COMPL
|STAT_OK
) )
1198 printk("%s: Can't get dump information.\n",dev
->name
);
1200 for(i
=0;i
<170;i
++) {
1201 printk("%02x ",(int) ((unsigned char *) (dump_cmd
+ 1))[i
]);
1209 MODULE_LICENSE("GPL");