sound/pci/azt3328.h

   1 #ifndef __SOUND_AZT3328_H
   2 #define __SOUND_AZT3328_H
   3
   4 /* "PU" == "power-up value", as tested on PCI168 PCI rev. 10 */
   5
   6 /*** main I/O area port indices ***/
   7 /* (only 0x70 of 0x80 bytes saved/restored by Windows driver) */
   8 #define AZF_IO_SIZE_CODEC       0x80
   9 #define AZF_IO_SIZE_CODEC_PM    0x70
  10
  11 /* the driver initialisation suggests a layout of 4 main areas:
  12  * from 0x00 (playback), from 0x20 (recording) and from 0x40 (maybe MPU401??).
  13  * And another area from 0x60 to 0x6f (DirectX timer, IRQ management,
  14  * power management etc.???). */
  15
  16 /** playback area **/
  17 #define IDX_IO_PLAY_FLAGS       0x00 /* PU:0x0000 */
  18      /* able to reactivate output after output muting due to 8/16bit
  19       * output change, just like 0x0002.
  20       * 0x0001 is the only bit that's able to start the DMA counter */
  21   #define DMA_RESUME                    0x0001 /* paused if cleared ? */
  22      /* 0x0002 *temporarily* set during DMA stopping. hmm
  23       * both 0x0002 and 0x0004 set in playback setup. */
  24      /* able to reactivate output after output muting due to 8/16bit
  25       * output change, just like 0x0001. */
  26   #define DMA_PLAY_SOMETHING1           0x0002 /* \ alternated (toggled) */
  27      /* 0x0004: NOT able to reactivate output */
  28   #define DMA_PLAY_SOMETHING2           0x0004 /* / bits */
  29   #define SOMETHING_ALMOST_ALWAYS_SET   0x0008 /* ???; can be modified */
  30   #define DMA_EPILOGUE_SOMETHING        0x0010
  31   #define DMA_SOMETHING_ELSE            0x0020 /* ??? */
  32   #define SOMETHING_UNMODIFIABLE        0xffc0 /* unused ? not modifiable */
  33 #define IDX_IO_PLAY_IRQTYPE     0x02 /* PU:0x0001 */
  34   /* write back to flags in case flags are set, in order to ACK IRQ in handler
  35    * (bit 1 of port 0x64 indicates interrupt for one of these three types)
  36    * sometimes in this case it just writes 0xffff to globally ACK all IRQs
  37    * settings written are not reflected when reading back, though.
  38    * seems to be IRQ, too (frequently used: port |= 0x07 !), but who knows ? */
  39   #define IRQ_PLAY_SOMETHING            0x0001 /* something & ACK */
  40   #define IRQ_FINISHED_PLAYBUF_1        0x0002 /* 1st dmabuf finished & ACK */
  41   #define IRQ_FINISHED_PLAYBUF_2        0x0004 /* 2nd dmabuf finished & ACK */
  42   #define IRQMASK_SOME_STATUS_1         0x0008 /* \ related bits */
  43   #define IRQMASK_SOME_STATUS_2         0x0010 /* / (checked together in loop) */
  44   #define IRQMASK_UNMODIFIABLE          0xffe0 /* unused ? not modifiable */
  45 #define IDX_IO_PLAY_DMA_START_1 0x04 /* start address of 1st DMA play area, PU:0x00000000 */
  46 #define IDX_IO_PLAY_DMA_START_2 0x08 /* start address of 2nd DMA play area, PU:0x00000000 */
  47 #define IDX_IO_PLAY_DMA_LEN_1   0x0c /* length of 1st DMA play area, PU:0x0000 */
  48 #define IDX_IO_PLAY_DMA_LEN_2   0x0e /* length of 2nd DMA play area, PU:0x0000 */
  49 #define IDX_IO_PLAY_DMA_CURRPOS 0x10 /* current DMA position, PU:0x00000000 */
  50 #define IDX_IO_PLAY_DMA_CURROFS 0x14 /* offset within current DMA play area, PU:0x0000 */
  51 #define IDX_IO_PLAY_SOUNDFORMAT 0x16 /* PU:0x0010 */
  52   /* all unspecified bits can't be modified */
  53   #define SOUNDFORMAT_FREQUENCY_MASK    0x000f
  54   #define SOUNDFORMAT_XTAL1             0x00
  55   #define SOUNDFORMAT_XTAL2             0x01
  56     /* all _SUSPECTED_ values are not used by Windows drivers, so we don't
  57      * have any hard facts, only rough measurements */
  58     #define SOUNDFORMAT_FREQ_SUSPECTED_4000     0x0c | SOUNDFORMAT_XTAL1
  59     #define SOUNDFORMAT_FREQ_SUSPECTED_4800     0x0a | SOUNDFORMAT_XTAL1
  60     #define SOUNDFORMAT_FREQ_5510               0x0c | SOUNDFORMAT_XTAL2
  61     #define SOUNDFORMAT_FREQ_6620               0x0a | SOUNDFORMAT_XTAL2
  62     #define SOUNDFORMAT_FREQ_8000               0x00 | SOUNDFORMAT_XTAL1 /* also 0x0e | SOUNDFORMAT_XTAL1? */
  63     #define SOUNDFORMAT_FREQ_9600               0x08 | SOUNDFORMAT_XTAL1
  64     #define SOUNDFORMAT_FREQ_11025              0x00 | SOUNDFORMAT_XTAL2 /* also 0x0e | SOUNDFORMAT_XTAL2? */
  65     #define SOUNDFORMAT_FREQ_SUSPECTED_13240    0x08 | SOUNDFORMAT_XTAL2 /* seems to be 6620 *2 */
  66     #define SOUNDFORMAT_FREQ_16000              0x02 | SOUNDFORMAT_XTAL1
  67     #define SOUNDFORMAT_FREQ_22050              0x02 | SOUNDFORMAT_XTAL2
  68     #define SOUNDFORMAT_FREQ_32000              0x04 | SOUNDFORMAT_XTAL1
  69     #define SOUNDFORMAT_FREQ_44100              0x04 | SOUNDFORMAT_XTAL2
  70     #define SOUNDFORMAT_FREQ_48000              0x06 | SOUNDFORMAT_XTAL1
  71     #define SOUNDFORMAT_FREQ_SUSPECTED_66200    0x06 | SOUNDFORMAT_XTAL2 /* 66200 (13240 * 5); 64000 may have been nicer :-\ */
  72   #define SOUNDFORMAT_FLAG_16BIT        0x0010
  73   #define SOUNDFORMAT_FLAG_2CHANNELS    0x0020
  74
  75 /** recording area (see also: playback bit flag definitions) **/
  76 #define IDX_IO_REC_FLAGS        0x20 /* ??, PU:0x0000 */
  77 #define IDX_IO_REC_IRQTYPE      0x22 /* ??, PU:0x0000 */
  78   #define IRQ_REC_SOMETHING             0x0001 /* something & ACK */
  79   #define IRQ_FINISHED_RECBUF_1         0x0002 /* 1st dmabuf finished & ACK */
  80   #define IRQ_FINISHED_RECBUF_2         0x0004 /* 2nd dmabuf finished & ACK */
  81   /* hmm, maybe these are just the corresponding *recording* flags ?
  82    * but OTOH they are most likely at port 0x22 instead */
  83   #define IRQMASK_SOME_STATUS_1         0x0008 /* \ related bits */
  84   #define IRQMASK_SOME_STATUS_2         0x0010 /* / (checked together in loop) */
  85 #define IDX_IO_REC_DMA_START_1  0x24 /* PU:0x00000000 */
  86 #define IDX_IO_REC_DMA_START_2  0x28 /* PU:0x00000000 */
  87 #define IDX_IO_REC_DMA_LEN_1    0x2c /* PU:0x0000 */
  88 #define IDX_IO_REC_DMA_LEN_2    0x2e /* PU:0x0000 */
  89 #define IDX_IO_REC_DMA_CURRPOS  0x30 /* PU:0x00000000 */
  90 #define IDX_IO_REC_DMA_CURROFS  0x34 /* PU:0x00000000 */
  91 #define IDX_IO_REC_SOUNDFORMAT  0x36 /* PU:0x0000 */
  92
  93 /** hmm, what is this I/O area for? MPU401?? or external DAC via I2S?? (after playback, recording, ???, timer) **/
  94 #define IDX_IO_SOMETHING_FLAGS  0x40 /* gets set to 0x34 just like port 0x0 and 0x20 on card init, PU:0x0000 */
  95 /* general */
  96 #define IDX_IO_42H              0x42 /* PU:0x0001 */
  97
  98 /** DirectX timer, main interrupt area (FIXME: and something else?) **/
  99 #define IDX_IO_TIMER_VALUE      0x60 /* found this timer area by pure luck :-) */
 100   #define TIMER_VALUE_MASK              0x000fffffUL /* timer countdown value; triggers IRQ when timer is finished */
 101   #define TIMER_ENABLE_COUNTDOWN        0x01000000UL /* activate the timer countdown */
 102   #define TIMER_ENABLE_IRQ              0x02000000UL /* trigger timer IRQ on zero transition */
 103   #define TIMER_ACK_IRQ                 0x04000000UL /* being set in IRQ handler in case port 0x00 (hmm, not port 0x64!?!?) had 0x0020 set upon IRQ handler */
 104 #define IDX_IO_IRQSTATUS        0x64
 105   #define IRQ_PLAYBACK                  0x0001
 106   #define IRQ_RECORDING                 0x0002
 107   #define IRQ_MPU401                    0x0010
 108   #define IRQ_TIMER                     0x0020 /* DirectX timer */
 109   #define IRQ_UNKNOWN1                  0x0040 /* probably unused */
 110   #define IRQ_UNKNOWN2                  0x0080 /* probably unused */
 111 #define IDX_IO_66H              0x66    /* writing 0xffff returns 0x0000 */
 112 #define IDX_IO_SOME_VALUE       0x68    /* this is set to e.g. 0x3ff or 0x300, and writable; maybe some buffer limit, but I couldn't find out more, PU:0x00ff */
 113 #define IDX_IO_6AH              0x6A    /* this WORD can be set to have bits 0x0028 activated (FIXME: correct??); actually inhibits PCM playback!!! maybe power management?? */
 114   #define IO_6A_PAUSE_PLAYBACK          0x0200 /* bit 9; sure, this pauses playback, but what the heck is this really about?? */
 115 #define IDX_IO_6CH              0x6C
 116 #define IDX_IO_6EH              0x6E    /* writing 0xffff returns 0x83fe */
 117 /* further I/O indices not saved/restored, so probably not used */
 118
 119
 120 /*** I/O 2 area port indices ***/
 121 /* (only 0x06 of 0x08 bytes saved/restored by Windows driver) */
 122 #define AZF_IO_SIZE_IO2         0x08
 123 #define AZF_IO_SIZE_IO2_PM      0x06
 124
 125 #define IDX_IO2_LEGACY_ADDR     0x04
 126   #define LEGACY_SOMETHING              0x01 /* OPL3?? */
 127   #define LEGACY_JOY                    0x08
 128
 129 #define AZF_IO_SIZE_MPU         0x04
 130 #define AZF_IO_SIZE_MPU_PM      0x04
 131
 132 #define AZF_IO_SIZE_SYNTH       0x08
 133 #define AZF_IO_SIZE_SYNTH_PM    0x06
 134
 135 /*** mixer I/O area port indices ***/
 136 /* (only 0x22 of 0x40 bytes saved/restored by Windows driver)
 137  * UNFORTUNATELY azf3328 is NOT truly AC97 compliant: see main file intro */
 138 #define AZF_IO_SIZE_MIXER       0x40
 139 #define AZF_IO_SIZE_MIXER_PM    0x22
 140
 141   #define MIXER_VOLUME_RIGHT_MASK       0x001f
 142   #define MIXER_VOLUME_LEFT_MASK        0x1f00
 143   #define MIXER_MUTE_MASK               0x8000
 144 #define IDX_MIXER_RESET         0x00 /* does NOT seem to have AC97 ID bits */
 145 #define IDX_MIXER_PLAY_MASTER   0x02
 146 #define IDX_MIXER_MODEMOUT      0x04
 147 #define IDX_MIXER_BASSTREBLE    0x06
 148   #define MIXER_BASSTREBLE_TREBLE_VOLUME_MASK   0x000e
 149   #define MIXER_BASSTREBLE_BASS_VOLUME_MASK     0x0e00
 150 #define IDX_MIXER_PCBEEP        0x08
 151 #define IDX_MIXER_MODEMIN       0x0a
 152 #define IDX_MIXER_MIC           0x0c
 153   #define MIXER_MIC_MICGAIN_20DB_ENHANCEMENT_MASK       0x0040
 154 #define IDX_MIXER_LINEIN        0x0e
 155 #define IDX_MIXER_CDAUDIO       0x10
 156 #define IDX_MIXER_VIDEO         0x12
 157 #define IDX_MIXER_AUX           0x14
 158 #define IDX_MIXER_WAVEOUT       0x16
 159 #define IDX_MIXER_FMSYNTH       0x18
 160 #define IDX_MIXER_REC_SELECT    0x1a
 161   #define MIXER_REC_SELECT_MIC          0x00
 162   #define MIXER_REC_SELECT_CD           0x01
 163   #define MIXER_REC_SELECT_VIDEO        0x02
 164   #define MIXER_REC_SELECT_AUX          0x03
 165   #define MIXER_REC_SELECT_LINEIN       0x04
 166   #define MIXER_REC_SELECT_MIXSTEREO    0x05
 167   #define MIXER_REC_SELECT_MIXMONO      0x06
 168   #define MIXER_REC_SELECT_MONOIN       0x07
 169 #define IDX_MIXER_REC_VOLUME    0x1c
 170 #define IDX_MIXER_ADVCTL1       0x1e
 171   /* unlisted bits are unmodifiable */
 172   #define MIXER_ADVCTL1_3DWIDTH_MASK    0x000e
 173   #define MIXER_ADVCTL1_HIFI3D_MASK     0x0300 /* yup, this is missing the high bit that official AC97 contains, plus it doesn't have linear bit value range behaviour but instead acts weirdly (possibly we're dealing with two *different* 3D settings here??) */
 174 #define IDX_MIXER_ADVCTL2       0x20 /* subset of AC97_GENERAL_PURPOSE reg! */
 175   /* unlisted bits are unmodifiable */
 176   #define MIXER_ADVCTL2_LPBK            0x0080 /* Loopback mode -- Win driver: "WaveOut3DBypass"? mutes WaveOut at LineOut */
 177   #define MIXER_ADVCTL2_MS              0x0100 /* Mic Select 0=Mic1, 1=Mic2 -- Win driver: "ModemOutSelect"?? */
 178   #define MIXER_ADVCTL2_MIX             0x0200 /* Mono output select 0=Mix, 1=Mic; Win driver: "MonoSelectSource"?? */
 179   #define MIXER_ADVCTL2_3D              0x2000 /* 3D Enhancement 1=on */
 180   #define MIXER_ADVCTL2_POP             0x8000 /* Pcm Out Path, 0=pre 3D, 1=post 3D */
 181
 182 #define IDX_MIXER_SOMETHING30H  0x30 /* used, but unknown??? */
 183
 184 /* driver internal flags */
 185 #define SET_CHAN_LEFT   1
 186 #define SET_CHAN_RIGHT  2
 187
 188 #endif /* __SOUND_AZT3328_H  */