?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
[PATCH] UHCI: unify BIOS handoff and driver reset code
[linux-2.6/suspend2-2.6.18.git] / drivers / media / video / bttv-cards.c
blob0881a17d5226416723edfb1e2bc64a66a2d388a1
1 /*
2
3 bttv-cards.c
4
5 this file has configuration informations - card-specific stuff
6 like the big tvcards array for the most part
7
8 Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de)
9 & Marcus Metzler (mocm@thp.uni-koeln.de)
10 (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
11
12 This program is free software; you can redistribute it and/or modify
13 it under the terms of the GNU General Public License as published by
14 the Free Software Foundation; either version 2 of the License, or
15 (at your option) any later version.
16
17 This program is distributed in the hope that it will be useful,
18 but WITHOUT ANY WARRANTY; without even the implied warranty of
19 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 GNU General Public License for more details.
21
22 You should have received a copy of the GNU General Public License
23 along with this program; if not, write to the Free Software
24 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25
26 */
27
28 #include <linux/config.h>
29 #include <linux/delay.h>
30 #include <linux/module.h>
31 #include <linux/moduleparam.h>
32 #include <linux/kmod.h>
33 #include <linux/init.h>
34 #include <linux/pci.h>
35 #include <linux/vmalloc.h>
36 #include <linux/firmware.h>
37
38 #include <asm/io.h>
39
40 #include "bttvp.h"
41
42 /* fwd decl */
43 static void boot_msp34xx(struct bttv *btv, int pin);
44 static void boot_bt832(struct bttv *btv);
45 static void hauppauge_eeprom(struct bttv *btv);
46 static void avermedia_eeprom(struct bttv *btv);
47 static void osprey_eeprom(struct bttv *btv);
48 static void modtec_eeprom(struct bttv *btv);
49 static void init_PXC200(struct bttv *btv);
50 static void init_RTV24(struct bttv *btv);
51
52 static void winview_audio(struct bttv *btv, struct video_audio *v, int set);
53 static void lt9415_audio(struct bttv *btv, struct video_audio *v, int set);
54 static void avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v,
55 int set);
56 static void avermedia_tv_stereo_audio(struct bttv *btv, struct video_audio *v,
57 int set);
58 static void terratv_audio(struct bttv *btv, struct video_audio *v, int set);
59 static void gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set);
60 static void gvbctv5pci_audio(struct bttv *btv, struct video_audio *v, int set);
61 static void winfast2000_audio(struct bttv *btv, struct video_audio *v, int set);
62 static void pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set);
63 static void fv2000s_audio(struct bttv *btv, struct video_audio *v, int set);
64 static void windvr_audio(struct bttv *btv, struct video_audio *v, int set);
65 static void adtvk503_audio(struct bttv *btv, struct video_audio *v, int set);
66 static void rv605_muxsel(struct bttv *btv, unsigned int input);
67 static void eagle_muxsel(struct bttv *btv, unsigned int input);
68 static void xguard_muxsel(struct bttv *btv, unsigned int input);
69 static void ivc120_muxsel(struct bttv *btv, unsigned int input);
70 static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
71
72 static void PXC200_muxsel(struct bttv *btv, unsigned int input);
73
74 static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
75 static void picolo_tetra_init(struct bttv *btv);
76
77 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
78 static void tibetCS16_init(struct bttv *btv);
79
80 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
81 static void kodicom4400r_init(struct bttv *btv);
82
83 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
84 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
85
86 static int terratec_active_radio_upgrade(struct bttv *btv);
87 static int tea5757_read(struct bttv *btv);
88 static int tea5757_write(struct bttv *btv, int value);
89 static void identify_by_eeprom(struct bttv *btv,
90 unsigned char eeprom_data[256]);
91 static int __devinit pvr_boot(struct bttv *btv);
92
93 /* config variables */
94 static unsigned int triton1=0;
95 static unsigned int vsfx=0;
96 static unsigned int latency = UNSET;
97 int no_overlay=-1;
98
99 static unsigned int card[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
100 static unsigned int pll[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
101 static unsigned int tuner[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
102 static unsigned int svhs[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
103 static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
104 static struct bttv *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
105 #ifdef MODULE
106 static unsigned int autoload = 1;
107 #else
108 static unsigned int autoload = 0;
109 #endif
110 static unsigned int gpiomask = UNSET;
111 static unsigned int audioall = UNSET;
112 static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
113
114 /* insmod options */
115 module_param(triton1, int, 0444);
116 module_param(vsfx, int, 0444);
117 module_param(no_overlay, int, 0444);
118 module_param(latency, int, 0444);
119 module_param(gpiomask, int, 0444);
120 module_param(audioall, int, 0444);
121 module_param(autoload, int, 0444);
122
123 module_param_array(card, int, NULL, 0444);
124 module_param_array(pll, int, NULL, 0444);
125 module_param_array(tuner, int, NULL, 0444);
126 module_param_array(svhs, int, NULL, 0444);
127 module_param_array(remote, int, NULL, 0444);
128 module_param_array(audiomux, int, NULL, 0444);
129
130 MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
131 "[enable bug compatibility for triton1 + others]");
132 MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
133 "[yet another chipset flaw workaround]");
134 MODULE_PARM_DESC(latency,"pci latency timer");
135 MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
136 MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
137 MODULE_PARM_DESC(tuner,"specify installed tuner type");
138 MODULE_PARM_DESC(autoload,"automatically load i2c modules like tuner.o, default is 1 (yes)");
139
140 /* ----------------------------------------------------------------------- */
141 /* list of card IDs for bt878+ cards */
142
143 static struct CARD {
144 unsigned id;
145 int cardnr;
146 char *name;
147 } cards[] __devinitdata = {
148 { 0x13eb0070, BTTV_HAUPPAUGE878, "Hauppauge WinTV" },
149 { 0x39000070, BTTV_HAUPPAUGE878, "Hauppauge WinTV-D" },
150 { 0x45000070, BTTV_HAUPPAUGEPVR, "Hauppauge WinTV/PVR" },
151 { 0xff000070, BTTV_OSPREY1x0, "Osprey-100" },
152 { 0xff010070, BTTV_OSPREY2x0_SVID,"Osprey-200" },
153 { 0xff020070, BTTV_OSPREY500, "Osprey-500" },
154 { 0xff030070, BTTV_OSPREY2000, "Osprey-2000" },
155 { 0xff040070, BTTV_OSPREY540, "Osprey-540" },
156
157 { 0x00011002, BTTV_ATI_TVWONDER, "ATI TV Wonder" },
158 { 0x00031002, BTTV_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
159
160 { 0x6606107d, BTTV_WINFAST2000, "Leadtek WinFast TV 2000" },
161 { 0x6607107d, BTTV_WINFASTVC100, "Leadtek WinFast VC 100" },
162 { 0x6609107d, BTTV_WINFAST2000, "Leadtek TV 2000 XP" },
163 { 0x263610b4, BTTV_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
164 { 0x264510b4, BTTV_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
165 { 0x402010fc, BTTV_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" },
166 { 0x405010fc, BTTV_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" },
167 { 0x407010fc, BTTV_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
168 { 0xd01810fc, BTTV_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
169
170 { 0x001211bd, BTTV_PINNACLE, "Pinnacle PCTV" },
171 /* some cards ship with byteswapped IDs ... */
172 { 0x1200bd11, BTTV_PINNACLE, "Pinnacle PCTV [bswap]" },
173 { 0xff00bd11, BTTV_PINNACLE, "Pinnacle PCTV [bswap]" },
174 /* this seems to happen as well ... */
175 { 0xff1211bd, BTTV_PINNACLE, "Pinnacle PCTV" },
176
177 { 0x3000121a, BTTV_VOODOOTV_FM, "3Dfx VoodooTV FM/ VoodooTV 200" },
178 { 0x263710b4, BTTV_VOODOOTV_FM, "3Dfx VoodooTV FM/ VoodooTV 200" },
179 { 0x3060121a, BTTV_STB2, "3Dfx VoodooTV 100/ STB OEM" },
180
181 { 0x3000144f, BTTV_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
182 { 0xa005144f, BTTV_MAGICTVIEW063, "CPH06X TView99-Card" },
183 { 0x3002144f, BTTV_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
184 { 0x3005144f, BTTV_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
185 { 0x5000144f, BTTV_MAGICTVIEW061, "Askey CPH050" },
186 { 0x300014ff, BTTV_MAGICTVIEW061, "TView 99 (CPH061)" },
187 { 0x300214ff, BTTV_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" },
188
189 { 0x00011461, BTTV_AVPHONE98, "AVerMedia TVPhone98" },
190 { 0x00021461, BTTV_AVERMEDIA98, "AVermedia TVCapture 98" },
191 { 0x00031461, BTTV_AVPHONE98, "AVerMedia TVPhone98" },
192 { 0x00041461, BTTV_AVERMEDIA98, "AVerMedia TVCapture 98" },
193 { 0x03001461, BTTV_AVERMEDIA98, "VDOMATE TV TUNER CARD" },
194
195 { 0x1117153b, BTTV_TERRATVALUE, "Terratec TValue (Philips PAL B/G)" },
196 { 0x1118153b, BTTV_TERRATVALUE, "Terratec TValue (Temic PAL B/G)" },
197 { 0x1119153b, BTTV_TERRATVALUE, "Terratec TValue (Philips PAL I)" },
198 { 0x111a153b, BTTV_TERRATVALUE, "Terratec TValue (Temic PAL I)" },
199
200 { 0x1123153b, BTTV_TERRATVRADIO, "Terratec TV Radio+" },
201 { 0x1127153b, BTTV_TERRATV, "Terratec TV+ (V1.05)" },
202 /* clashes with FlyVideo
203 *{ 0x18521852, BTTV_TERRATV, "Terratec TV+ (V1.10)" }, */
204 { 0x1134153b, BTTV_TERRATVALUE, "Terratec TValue (LR102)" },
205 { 0x1135153b, BTTV_TERRATVALUER, "Terratec TValue Radio" }, /* LR102 */
206 { 0x5018153b, BTTV_TERRATVALUE, "Terratec TValue" }, /* ?? */
207 { 0xff3b153b, BTTV_TERRATVALUER, "Terratec TValue Radio" }, /* ?? */
208
209 { 0x400015b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
210 { 0x400a15b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
211 { 0x400d15b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
212 { 0x401015b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
213 { 0x401615b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
214
215 { 0x1430aa00, BTTV_PV143, "Provideo PV143A" },
216 { 0x1431aa00, BTTV_PV143, "Provideo PV143B" },
217 { 0x1432aa00, BTTV_PV143, "Provideo PV143C" },
218 { 0x1433aa00, BTTV_PV143, "Provideo PV143D" },
219 { 0x1433aa03, BTTV_PV143, "Security Eyes" },
220
221 { 0x1460aa00, BTTV_PV150, "Provideo PV150A-1" },
222 { 0x1461aa01, BTTV_PV150, "Provideo PV150A-2" },
223 { 0x1462aa02, BTTV_PV150, "Provideo PV150A-3" },
224 { 0x1463aa03, BTTV_PV150, "Provideo PV150A-4" },
225
226 { 0x1464aa04, BTTV_PV150, "Provideo PV150B-1" },
227 { 0x1465aa05, BTTV_PV150, "Provideo PV150B-2" },
228 { 0x1466aa06, BTTV_PV150, "Provideo PV150B-3" },
229 { 0x1467aa07, BTTV_PV150, "Provideo PV150B-4" },
230
231 { 0xa132ff00, BTTV_IVC100, "IVC-100" },
232 { 0xa1550000, BTTV_IVC200, "IVC-200" },
233 { 0xa1550001, BTTV_IVC200, "IVC-200" },
234 { 0xa1550002, BTTV_IVC200, "IVC-200" },
235 { 0xa1550003, BTTV_IVC200, "IVC-200" },
236 { 0xa1550100, BTTV_IVC200, "IVC-200G" },
237 { 0xa1550101, BTTV_IVC200, "IVC-200G" },
238 { 0xa1550102, BTTV_IVC200, "IVC-200G" },
239 { 0xa1550103, BTTV_IVC200, "IVC-200G" },
240 { 0xa182ff00, BTTV_IVC120, "IVC-120G" },
241 { 0xa182ff01, BTTV_IVC120, "IVC-120G" },
242 { 0xa182ff02, BTTV_IVC120, "IVC-120G" },
243 { 0xa182ff03, BTTV_IVC120, "IVC-120G" },
244 { 0xa182ff04, BTTV_IVC120, "IVC-120G" },
245 { 0xa182ff05, BTTV_IVC120, "IVC-120G" },
246 { 0xa182ff06, BTTV_IVC120, "IVC-120G" },
247 { 0xa182ff07, BTTV_IVC120, "IVC-120G" },
248 { 0xa182ff08, BTTV_IVC120, "IVC-120G" },
249 { 0xa182ff09, BTTV_IVC120, "IVC-120G" },
250 { 0xa182ff0a, BTTV_IVC120, "IVC-120G" },
251 { 0xa182ff0b, BTTV_IVC120, "IVC-120G" },
252 { 0xa182ff0c, BTTV_IVC120, "IVC-120G" },
253 { 0xa182ff0d, BTTV_IVC120, "IVC-120G" },
254 { 0xa182ff0e, BTTV_IVC120, "IVC-120G" },
255 { 0xa182ff0f, BTTV_IVC120, "IVC-120G" },
256
257 { 0x41424344, BTTV_GRANDTEC, "GrandTec Multi Capture" },
258 { 0x01020304, BTTV_XGUARD, "Grandtec Grand X-Guard" },
259
260 { 0x18501851, BTTV_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
261 { 0xa0501851, BTTV_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
262 { 0x18511851, BTTV_FLYVIDEO98EZ, "FlyVideo 98EZ (LR51)/ CyberMail AV" },
263 { 0x18521852, BTTV_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
264 { 0x41a0a051, BTTV_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
265 { 0x18501f7f, BTTV_FLYVIDEO_98, "Lifeview Flyvideo 98" },
266
267 { 0x010115cb, BTTV_GMV1, "AG GMV1" },
268 { 0x010114c7, BTTV_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
269
270 { 0x10b42636, BTTV_HAUPPAUGE878, "STB ???" },
271 { 0x217d6606, BTTV_WINFAST2000, "Leadtek WinFast TV 2000" },
272 { 0xfff6f6ff, BTTV_WINFAST2000, "Leadtek WinFast TV 2000" },
273 { 0x03116000, BTTV_SENSORAY311, "Sensoray 311" },
274 { 0x00790e11, BTTV_WINDVR, "Canopus WinDVR PCI" },
275 { 0xa0fca1a0, BTTV_ZOLTRIX, "Face to Face Tvmax" },
276 { 0x20007063, BTTV_PC_HDTV, "pcHDTV HD-2000 TV"},
277 { 0x82b2aa6a, BTTV_SIMUS_GVC1100, "SIMUS GVC1100" },
278 { 0x146caa0c, BTTV_PV951, "ituner spectra8" },
279 { 0x200a1295, BTTV_PXC200, "ImageNation PXC200A" },
280
281 { 0x40111554, BTTV_PV_BT878P_9B, "Prolink Pixelview PV-BT" },
282 { 0x17de0a01, BTTV_KWORLD, "Mecer TV/FM/Video Tuner" },
283
284 { 0x01051805, BTTV_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
285 { 0x01061805, BTTV_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
286 { 0x01071805, BTTV_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
287 { 0x01081805, BTTV_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
288
289 { 0x15409511, BTTV_ACORP_Y878F, "Acorp Y878F" },
290
291 /* likely broken, vendor id doesn't match the other magic views ...
292 * { 0xa0fca04f, BTTV_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
293
294 /* DVB cards (using pci function .1 for mpeg data xfer) */
295 { 0x01010071, BTTV_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
296 { 0x07611461, BTTV_AVDVBT_761, "AverMedia AverTV DVB-T 761" },
297 { 0x001c11bd, BTTV_PINNACLESAT, "Pinnacle PCTV Sat" },
298 { 0x002611bd, BTTV_TWINHAN_DST, "Pinnacle PCTV SAT CI" },
299 { 0x00011822, BTTV_TWINHAN_DST, "Twinhan VisionPlus DVB" },
300 { 0xfc00270f, BTTV_TWINHAN_DST, "ChainTech digitop DST-1000 DVB-S" },
301 { 0x07711461, BTTV_AVDVBT_771, "AVermedia AverTV DVB-T 771" },
302 { 0xdb1018ac, BTTV_DVICO_DVBT_LITE, "DViCO FusionHDTV DVB-T Lite" },
303 { 0xd50018ac, BTTV_DVICO_FUSIONHDTV_5_LITE, "DViCO FusionHDTV 5 Lite" },
304
305 { 0, -1, NULL }
306 };
307
308 /* ----------------------------------------------------------------------- */
309 /* array with description for bt848 / bt878 tv/grabber cards */
310
311 struct tvcard bttv_tvcards[] = {
312 {
313 /* ---- card 0x00 ---------------------------------- */
314 .name = " *** UNKNOWN/GENERIC *** ",
315 .video_inputs = 4,
316 .audio_inputs = 1,
317 .tuner = 0,
318 .svhs = 2,
319 .muxsel = { 2, 3, 1, 0},
320 .tuner_type = -1,
321 .tuner_addr = ADDR_UNSET,
322 },{
323 .name = "MIRO PCTV",
324 .video_inputs = 4,
325 .audio_inputs = 1,
326 .tuner = 0,
327 .svhs = 2,
328 .gpiomask = 15,
329 .muxsel = { 2, 3, 1, 1},
330 .audiomux = { 2, 0, 0, 0, 10},
331 .needs_tvaudio = 1,
332 .tuner_type = -1,
333 .tuner_addr = ADDR_UNSET,
334 },{
335 .name = "Hauppauge (bt848)",
336 .video_inputs = 4,
337 .audio_inputs = 1,
338 .tuner = 0,
339 .svhs = 2,
340 .gpiomask = 7,
341 .muxsel = { 2, 3, 1, 1},
342 .audiomux = { 0, 1, 2, 3, 4},
343 .needs_tvaudio = 1,
344 .tuner_type = -1,
345 .tuner_addr = ADDR_UNSET,
346 },{
347 .name = "STB, Gateway P/N 6000699 (bt848)",
348 .video_inputs = 3,
349 .audio_inputs = 1,
350 .tuner = 0,
351 .svhs = 2,
352 .gpiomask = 7,
353 .muxsel = { 2, 3, 1, 1},
354 .audiomux = { 4, 0, 2, 3, 1},
355 .no_msp34xx = 1,
356 .needs_tvaudio = 1,
357 .tuner_type = TUNER_PHILIPS_NTSC,
358 .tuner_addr = ADDR_UNSET,
359 .pll = PLL_28,
360 .has_radio = 1,
361 },{
362
363 /* ---- card 0x04 ---------------------------------- */
364 .name = "Intel Create and Share PCI/ Smart Video Recorder III",
365 .video_inputs = 4,
366 .audio_inputs = 0,
367 .tuner = -1,
368 .svhs = 2,
369 .gpiomask = 0,
370 .muxsel = { 2, 3, 1, 1},
371 .audiomux = { 0 },
372 .needs_tvaudio = 0,
373 .tuner_type = 4,
374 .tuner_addr = ADDR_UNSET,
375 },{
376 .name = "Diamond DTV2000",
377 .video_inputs = 4,
378 .audio_inputs = 1,
379 .tuner = 0,
380 .svhs = 2,
381 .gpiomask = 3,
382 .muxsel = { 2, 3, 1, 0},
383 .audiomux = { 0, 1, 0, 1, 3},
384 .needs_tvaudio = 1,
385 .tuner_type = -1,
386 .tuner_addr = ADDR_UNSET,
387 },{
388 .name = "AVerMedia TVPhone",
389 .video_inputs = 3,
390 .audio_inputs = 1,
391 .tuner = 0,
392 .svhs = 3,
393 .muxsel = { 2, 3, 1, 1},
394 .gpiomask = 0x0f,
395 .audiomux = { 0x0c, 0x04, 0x08, 0x04, 0},
396 /* 0x04 for some cards ?? */
397 .needs_tvaudio = 1,
398 .tuner_type = -1,
399 .tuner_addr = ADDR_UNSET,
400 .audio_hook = avermedia_tvphone_audio,
401 .has_remote = 1,
402 },{
403 .name = "MATRIX-Vision MV-Delta",
404 .video_inputs = 5,
405 .audio_inputs = 1,
406 .tuner = -1,
407 .svhs = 3,
408 .gpiomask = 0,
409 .muxsel = { 2, 3, 1, 0, 0},
410 .audiomux = {0 },
411 .needs_tvaudio = 1,
412 .tuner_type = -1,
413 .tuner_addr = ADDR_UNSET,
414 },{
415
416 /* ---- card 0x08 ---------------------------------- */
417 .name = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
418 .video_inputs = 4,
419 .audio_inputs = 1,
420 .tuner = 0,
421 .svhs = 2,
422 .gpiomask = 0xc00,
423 .muxsel = { 2, 3, 1, 1},
424 .audiomux = { 0, 0xc00, 0x800, 0x400, 0xc00, 0},
425 .needs_tvaudio = 1,
426 .pll = PLL_28,
427 .tuner_type = -1,
428 .tuner_addr = ADDR_UNSET,
429 },{
430 .name = "IMS/IXmicro TurboTV",
431 .video_inputs = 3,
432 .audio_inputs = 1,
433 .tuner = 0,
434 .svhs = 2,
435 .gpiomask = 3,
436 .muxsel = { 2, 3, 1, 1},
437 .audiomux = { 1, 1, 2, 3, 0},
438 .needs_tvaudio = 0,
439 .pll = PLL_28,
440 .tuner_type = TUNER_TEMIC_PAL,
441 .tuner_addr = ADDR_UNSET,
442 },{
443 .name = "Hauppauge (bt878)",
444 .video_inputs = 4,
445 .audio_inputs = 1,
446 .tuner = 0,
447 .svhs = 2,
448 .gpiomask = 0x0f, /* old: 7 */
449 .muxsel = { 2, 0, 1, 1},
450 .audiomux = { 0, 1, 2, 3, 4},
451 .needs_tvaudio = 1,
452 .pll = PLL_28,
453 .tuner_type = -1,
454 .tuner_addr = ADDR_UNSET,
455 },{
456 .name = "MIRO PCTV pro",
457 .video_inputs = 3,
458 .audio_inputs = 1,
459 .tuner = 0,
460 .svhs = 2,
461 .gpiomask = 0x3014f,
462 .muxsel = { 2, 3, 1, 1},
463 .audiomux = { 0x20001,0x10001, 0, 0,10},
464 .needs_tvaudio = 1,
465 .tuner_type = -1,
466 .tuner_addr = ADDR_UNSET,
467 },{
468
469 /* ---- card 0x0c ---------------------------------- */
470 .name = "ADS Technologies Channel Surfer TV (bt848)",
471 .video_inputs = 3,
472 .audio_inputs = 1,
473 .tuner = 0,
474 .svhs = 2,
475 .gpiomask = 15,
476 .muxsel = { 2, 3, 1, 1},
477 .audiomux = { 13, 14, 11, 7, 0, 0},
478 .needs_tvaudio = 1,
479 .tuner_type = -1,
480 .tuner_addr = ADDR_UNSET,
481 },{
482 .name = "AVerMedia TVCapture 98",
483 .video_inputs = 3,
484 .audio_inputs = 4,
485 .tuner = 0,
486 .svhs = 2,
487 .gpiomask = 15,
488 .muxsel = { 2, 3, 1, 1},
489 .audiomux = { 13, 14, 11, 7, 0, 0},
490 .needs_tvaudio = 1,
491 .msp34xx_alt = 1,
492 .pll = PLL_28,
493 .tuner_type = TUNER_PHILIPS_PAL,
494 .tuner_addr = ADDR_UNSET,
495 .audio_hook = avermedia_tv_stereo_audio,
496 },{
497 .name = "Aimslab Video Highway Xtreme (VHX)",
498 .video_inputs = 3,
499 .audio_inputs = 1,
500 .tuner = 0,
501 .svhs = 2,
502 .gpiomask = 7,
503 .muxsel = { 2, 3, 1, 1},
504 .audiomux = { 0, 2, 1, 3, 4}, /* old: { 0, 1, 2, 3, 4} */
505 .needs_tvaudio = 1,
506 .pll = PLL_28,
507 .tuner_type = -1,
508 .tuner_addr = ADDR_UNSET,
509 },{
510 .name = "Zoltrix TV-Max",
511 .video_inputs = 3,
512 .audio_inputs = 1,
513 .tuner = 0,
514 .svhs = 2,
515 .gpiomask = 15,
516 .muxsel = { 2, 3, 1, 1},
517 .audiomux = {0 , 0, 1 , 0, 10},
518 .needs_tvaudio = 1,
519 .tuner_type = -1,
520 .tuner_addr = ADDR_UNSET,
521 },{
522
523 /* ---- card 0x10 ---------------------------------- */
524 .name = "Prolink Pixelview PlayTV (bt878)",
525 .video_inputs = 3,
526 .audio_inputs = 1,
527 .tuner = 0,
528 .svhs = 2,
529 .gpiomask = 0x01fe00,
530 .muxsel = { 2, 3, 1, 1},
531 /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
532 .audiomux = { 0x001e00, 0, 0x018000, 0x014000, 0x002000, 0 },
533 .needs_tvaudio = 1,
534 .pll = PLL_28,
535 .tuner_type = -1,
536 },{
537 .name = "Leadtek WinView 601",
538 .video_inputs = 3,
539 .audio_inputs = 1,
540 .tuner = 0,
541 .svhs = 2,
542 .gpiomask = 0x8300f8,
543 .muxsel = { 2, 3, 1, 1,0},
544 .audiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007},
545 .needs_tvaudio = 1,
546 .tuner_type = -1,
547 .tuner_addr = ADDR_UNSET,
548 .audio_hook = winview_audio,
549 .has_radio = 1,
550 },{
551 .name = "AVEC Intercapture",
552 .video_inputs = 3,
553 .audio_inputs = 2,
554 .tuner = 0,
555 .svhs = 2,
556 .gpiomask = 0,
557 .muxsel = {2, 3, 1, 1},
558 .audiomux = {1, 0, 0, 0, 0},
559 .needs_tvaudio = 1,
560 .tuner_type = -1,
561 .tuner_addr = ADDR_UNSET,
562 },{
563 .name = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
564 .video_inputs = 4,
565 .audio_inputs = 1,
566 .tuner = -1,
567 .svhs = -1,
568 .gpiomask = 0x8dff00,
569 .muxsel = { 2, 3, 1, 1},
570 .audiomux = { 0 },
571 .no_msp34xx = 1,
572 .tuner_type = -1,
573 .tuner_addr = ADDR_UNSET,
574 },{
575
576 /* ---- card 0x14 ---------------------------------- */
577 .name = "CEI Raffles Card",
578 .video_inputs = 3,
579 .audio_inputs = 3,
580 .tuner = 0,
581 .svhs = 2,
582 .muxsel = {2, 3, 1, 1},
583 .tuner_type = -1,
584 .tuner_addr = ADDR_UNSET,
585 },{
586 .name = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
587 .video_inputs = 4,
588 .audio_inputs = 2, /* tuner, line in */
589 .tuner = 0,
590 .svhs = 2,
591 .gpiomask = 0x1800,
592 .muxsel = { 2, 3, 1, 1},
593 .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800},
594 .pll = PLL_28,
595 .tuner_type = TUNER_PHILIPS_PAL_I,
596 .tuner_addr = ADDR_UNSET,
597 },{
598 .name = "Askey CPH050/ Phoebe Tv Master + FM",
599 .video_inputs = 3,
600 .audio_inputs = 1,
601 .tuner = 0,
602 .svhs = 2,
603 .gpiomask = 0xc00,
604 .muxsel = { 2, 3, 1, 1},
605 .audiomux = {0, 1, 0x800, 0x400, 0xc00, 0},
606 .needs_tvaudio = 1,
607 .pll = PLL_28,
608 .tuner_type = -1,
609 .tuner_addr = ADDR_UNSET,
610 },{
611 .name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
612 .video_inputs = 3,
613 .audio_inputs = 1,
614 .tuner = 0,
615 .svhs = -1,
616 .gpiomask = 7,
617 .muxsel = { 2, 3, -1 },
618 .digital_mode = DIGITAL_MODE_CAMERA,
619 .audiomux = { 0, 0, 0, 0, 0 },
620 .no_msp34xx = 1,
621 .pll = PLL_28,
622 .tuner_type = TUNER_ALPS_TSBB5_PAL_I,
623 .tuner_addr = ADDR_UNSET,
624 },{
625
626 /* ---- card 0x18 ---------------------------------- */
627 .name = "Askey CPH05X/06X (bt878) [many vendors]",
628 .video_inputs = 3,
629 .audio_inputs = 1,
630 .tuner = 0,
631 .svhs = 2,
632 .gpiomask = 0xe00,
633 .muxsel = { 2, 3, 1, 1},
634 .audiomux = {0x400, 0x400, 0x400, 0x400, 0xc00},
635 .needs_tvaudio = 1,
636 .pll = PLL_28,
637 .tuner_type = -1,
638 .tuner_addr = ADDR_UNSET,
639 .has_remote = 1,
640 },{
641 .name = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
642 .video_inputs = 3,
643 .audio_inputs = 1,
644 .tuner = 0,
645 .svhs = 2,
646 .gpiomask = 0x1f0fff,
647 .muxsel = { 2, 3, 1, 1},
648 .audiomux = { 0x20000, 0x30000, 0x10000, 0, 0x40000},
649 .needs_tvaudio = 0,
650 .tuner_type = TUNER_PHILIPS_PAL,
651 .tuner_addr = ADDR_UNSET,
652 .audio_hook = terratv_audio,
653 },{
654 .name = "Hauppauge WinCam newer (bt878)",
655 .video_inputs = 4,
656 .audio_inputs = 1,
657 .tuner = 0,
658 .svhs = 3,
659 .gpiomask = 7,
660 .muxsel = { 2, 0, 1, 1},
661 .audiomux = { 0, 1, 2, 3, 4},
662 .needs_tvaudio = 1,
663 .tuner_type = -1,
664 .tuner_addr = ADDR_UNSET,
665 },{
666 .name = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
667 .video_inputs = 4,
668 .audio_inputs = 2,
669 .tuner = 0,
670 .svhs = 2,
671 .gpiomask = 0x1800,
672 .muxsel = { 2, 3, 1, 1},
673 .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800},
674 .pll = PLL_28,
675 .tuner_type = TUNER_PHILIPS_SECAM,
676 .tuner_addr = ADDR_UNSET,
677 },{
678
679 /* ---- card 0x1c ---------------------------------- */
680 .name = "Terratec TerraTV+ Version 1.1 (bt878)",
681 .video_inputs = 3,
682 .audio_inputs = 1,
683 .tuner = 0,
684 .svhs = 2,
685 .gpiomask = 0x1f0fff,
686 .muxsel = { 2, 3, 1, 1},
687 .audiomux = { 0x20000, 0x30000, 0x10000, 0x00000, 0x40000},
688 .needs_tvaudio = 0,
689 .tuner_type = TUNER_PHILIPS_PAL,
690 .tuner_addr = ADDR_UNSET,
691 .audio_hook = terratv_audio,
692 /* GPIO wiring:
693 External 20 pin connector (for Active Radio Upgrade board)
694 gpio00: i2c-sda
695 gpio01: i2c-scl
696 gpio02: om5610-data
697 gpio03: om5610-clk
698 gpio04: om5610-wre
699 gpio05: om5610-stereo
700 gpio06: rds6588-davn
701 gpio07: Pin 7 n.c.
702 gpio08: nIOW
703 gpio09+10: nIOR, nSEL ?? (bt878)
704 gpio09: nIOR (bt848)
705 gpio10: nSEL (bt848)
706 Sound Routing:
707 gpio16: u2-A0 (1st 4052bt)
708 gpio17: u2-A1
709 gpio18: u2-nEN
710 gpio19: u4-A0 (2nd 4052)
711 gpio20: u4-A1
712 u4-nEN - GND
713 Btspy:
714 00000 : Cdrom (internal audio input)
715 10000 : ext. Video audio input
716 20000 : TV Mono
717 a0000 : TV Mono/2
718 1a0000 : TV Stereo
719 30000 : Radio
720 40000 : Mute
721 */
722
723 },{
724 /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
725 .name = "Imagenation PXC200",
726 .video_inputs = 5,
727 .audio_inputs = 1,
728 .tuner = -1,
729 .svhs = 1, /* was: 4 */
730 .gpiomask = 0,
731 .muxsel = { 2, 3, 1, 0, 0},
732 .audiomux = { 0 },
733 .needs_tvaudio = 1,
734 .tuner_type = -1,
735 .tuner_addr = ADDR_UNSET,
736 .muxsel_hook = PXC200_muxsel,
737
738 },{
739 .name = "Lifeview FlyVideo 98 LR50",
740 .video_inputs = 4,
741 .audio_inputs = 1,
742 .tuner = 0,
743 .svhs = 2,
744 .gpiomask = 0x1800, /* 0x8dfe00 */
745 .muxsel = { 2, 3, 1, 1},
746 .audiomux = { 0, 0x0800, 0x1000, 0x1000, 0x1800, 0 },
747 .pll = PLL_28,
748 .tuner_type = -1,
749 .tuner_addr = ADDR_UNSET,
750 },{
751 .name = "Formac iProTV, Formac ProTV I (bt848)",
752 .video_inputs = 4,
753 .audio_inputs = 1,
754 .tuner = 0,
755 .svhs = 3,
756 .gpiomask = 1,
757 .muxsel = { 2, 3, 1, 1},
758 .audiomux = { 1, 0, 0, 0, 0 },
759 .pll = PLL_28,
760 .tuner_type = TUNER_PHILIPS_PAL,
761 .tuner_addr = ADDR_UNSET,
762 },{
763
764 /* ---- card 0x20 ---------------------------------- */
765 .name = "Intel Create and Share PCI/ Smart Video Recorder III",
766 .video_inputs = 4,
767 .audio_inputs = 0,
768 .tuner = -1,
769 .svhs = 2,
770 .gpiomask = 0,
771 .muxsel = { 2, 3, 1, 1},
772 .audiomux = { 0 },
773 .needs_tvaudio = 0,
774 .tuner_type = 4,
775 .tuner_addr = ADDR_UNSET,
776 },{
777 .name = "Terratec TerraTValue Version Bt878",
778 .video_inputs = 3,
779 .audio_inputs = 1,
780 .tuner = 0,
781 .svhs = 2,
782 .gpiomask = 0xffff00,
783 .muxsel = { 2, 3, 1, 1},
784 .audiomux = { 0x500, 0, 0x300, 0x900, 0x900},
785 .needs_tvaudio = 1,
786 .pll = PLL_28,
787 .tuner_type = TUNER_PHILIPS_PAL,
788 .tuner_addr = ADDR_UNSET,
789 },{
790 .name = "Leadtek WinFast 2000/ WinFast 2000 XP",
791 .video_inputs = 4,
792 .audio_inputs = 1,
793 .tuner = 0,
794 .svhs = 2,
795 .muxsel = { 2, 3, 1, 1, 0}, /* TV, CVid, SVid, CVid over SVid connector */
796 /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
797 .gpiomask = 0xb33000,
798 .audiomux = { 0x122000,0x1000,0x0000,0x620000,0x800000 },
799 /* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
800 gpio23 -- hef4052:nEnable (0x800000)
801 gpio12 -- hef4052:A1
802 gpio13 -- hef4052:A0
803 0x0000: external audio
804 0x1000: FM
805 0x2000: TV
806 0x3000: n.c.
807 Note: There exists another variant "Winfast 2000" with tv stereo !?
808 Note: eeprom only contains FF and pci subsystem id 107d:6606
809 */
810 .needs_tvaudio = 0,
811 .pll = PLL_28,
812 .has_radio = 1,
813 .tuner_type = 5, /* default for now, gpio reads BFFF06 for Pal bg+dk */
814 .tuner_addr = ADDR_UNSET,
815 .audio_hook = winfast2000_audio,
816 .has_remote = 1,
817 },{
818 .name = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
819 .video_inputs = 4,
820 .audio_inputs = 3,
821 .tuner = 0,
822 .svhs = 2,
823 .gpiomask = 0x1800,
824 .muxsel = { 2, 3, 1, 1},
825 .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800},
826 .pll = PLL_28,
827 .tuner_type = -1,
828 .tuner_addr = ADDR_UNSET,
829 },{
830
831 /* ---- card 0x24 ---------------------------------- */
832 .name = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
833 .video_inputs = 4,
834 .audio_inputs = 3,
835 .tuner = 0,
836 .svhs = 2,
837 .gpiomask = 0x1800,
838 .muxsel = { 2, 3, 1, 1},
839 .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 },
840 .pll = PLL_28,
841 .tuner_type = -1,
842 .tuner_addr = ADDR_UNSET,
843 .has_radio = 1,
844 },{
845 .name = "Prolink PixelView PlayTV pro",
846 .video_inputs = 3,
847 .audio_inputs = 1,
848 .tuner = 0,
849 .svhs = 2,
850 .gpiomask = 0xff,
851 .muxsel = { 2, 3, 1, 1 },
852 .audiomux = { 0x21, 0x20, 0x24, 0x2c, 0x29, 0x29 },
853 .no_msp34xx = 1,
854 .pll = PLL_28,
855 .tuner_type = -1,
856 .tuner_addr = ADDR_UNSET,
857 },{
858 .name = "Askey CPH06X TView99",
859 .video_inputs = 4,
860 .audio_inputs = 1,
861 .tuner = 0,
862 .svhs = 2,
863 .gpiomask = 0x551e00,
864 .muxsel = { 2, 3, 1, 0},
865 .audiomux = { 0x551400, 0x551200, 0, 0, 0x551c00, 0x551200 },
866 .needs_tvaudio = 1,
867 .pll = PLL_28,
868 .tuner_type = 1,
869 .tuner_addr = ADDR_UNSET,
870 .has_remote = 1,
871 },{
872 .name = "Pinnacle PCTV Studio/Rave",
873 .video_inputs = 3,
874 .audio_inputs = 1,
875 .tuner = 0,
876 .svhs = 2,
877 .gpiomask = 0x03000F,
878 .muxsel = { 2, 3, 1, 1},
879 .audiomux = { 2, 0xd0001, 0, 0, 1},
880 .needs_tvaudio = 0,
881 .pll = PLL_28,
882 .tuner_type = -1,
883 .tuner_addr = ADDR_UNSET,
884 },{
885
886 /* ---- card 0x28 ---------------------------------- */
887 .name = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
888 .video_inputs = 3,
889 .audio_inputs = 1,
890 .tuner = 0,
891 .svhs = 2,
892 .gpiomask = 7,
893 .muxsel = { 2, 3, 1, 1},
894 .audiomux = { 4, 0, 2, 3, 1},
895 .no_msp34xx = 1,
896 .needs_tvaudio = 1,
897 .tuner_type = TUNER_PHILIPS_NTSC,
898 .tuner_addr = ADDR_UNSET,
899 .pll = PLL_28,
900 .has_radio = 1,
901 },{
902 .name = "AVerMedia TVPhone 98",
903 .video_inputs = 3,
904 .audio_inputs = 4,
905 .tuner = 0,
906 .svhs = 2,
907 .gpiomask = 15,
908 .muxsel = { 2, 3, 1, 1},
909 .audiomux = { 13, 4, 11, 7, 0, 0},
910 .needs_tvaudio = 1,
911 .pll = PLL_28,
912 .tuner_type = -1,
913 .tuner_addr = ADDR_UNSET,
914 .has_radio = 1,
915 .audio_hook = avermedia_tvphone_audio,
916 },{
917 .name = "ProVideo PV951", /* pic16c54 */
918 .video_inputs = 3,
919 .audio_inputs = 1,
920 .tuner = 0,
921 .svhs = 2,
922 .gpiomask = 0,
923 .muxsel = { 2, 3, 1, 1},
924 .audiomux = { 0, 0, 0, 0, 0},
925 .needs_tvaudio = 1,
926 .no_msp34xx = 1,
927 .pll = PLL_28,
928 .tuner_type = 1,
929 .tuner_addr = ADDR_UNSET,
930 },{
931 .name = "Little OnAir TV",
932 .video_inputs = 3,
933 .audio_inputs = 1,
934 .tuner = 0,
935 .svhs = 2,
936 .gpiomask = 0xe00b,
937 .muxsel = {2, 3, 1, 1},
938 .audiomux = {0xff9ff6, 0xff9ff6, 0xff1ff7, 0, 0xff3ffc},
939 .no_msp34xx = 1,
940 .tuner_type = -1,
941 .tuner_addr = ADDR_UNSET,
942 },{
943
944 /* ---- card 0x2c ---------------------------------- */
945 .name = "Sigma TVII-FM",
946 .video_inputs = 2,
947 .audio_inputs = 1,
948 .tuner = 0,
949 .svhs = -1,
950 .gpiomask = 3,
951 .muxsel = {2, 3, 1, 1},
952 .audiomux = {1, 1, 0, 2, 3},
953 .no_msp34xx = 1,
954 .pll = PLL_NONE,
955 .tuner_type = -1,
956 .tuner_addr = ADDR_UNSET,
957 },{
958 .name = "MATRIX-Vision MV-Delta 2",
959 .video_inputs = 5,
960 .audio_inputs = 1,
961 .tuner = -1,
962 .svhs = 3,
963 .gpiomask = 0,
964 .muxsel = { 2, 3, 1, 0, 0},
965 .audiomux = {0 },
966 .no_msp34xx = 1,
967 .pll = PLL_28,
968 .tuner_type = -1,
969 .tuner_addr = ADDR_UNSET,
970 },{
971 .name = "Zoltrix Genie TV/FM",
972 .video_inputs = 3,
973 .audio_inputs = 1,
974 .tuner = 0,
975 .svhs = 2,
976 .gpiomask = 0xbcf03f,
977 .muxsel = { 2, 3, 1, 1},
978 .audiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0, 0xbcb03f},
979 .no_msp34xx = 1,
980 .pll = PLL_28,
981 .tuner_type = 21,
982 .tuner_addr = ADDR_UNSET,
983 },{
984 .name = "Terratec TV/Radio+",
985 .video_inputs = 3,
986 .audio_inputs = 1,
987 .tuner = 0,
988 .svhs = 2,
989 .gpiomask = 0x70000,
990 .muxsel = { 2, 3, 1, 1},
991 .audiomux = { 0x20000, 0x30000, 0x10000, 0, 0x40000, 0x20000 },
992 .needs_tvaudio = 1,
993 .no_msp34xx = 1,
994 .pll = PLL_35,
995 .tuner_type = 1,
996 .tuner_addr = ADDR_UNSET,
997 .has_radio = 1,
998 },{
999
1000 /* ---- card 0x30 ---------------------------------- */
1001 .name = "Askey CPH03x/ Dynalink Magic TView",
1002 .video_inputs = 3,
1003 .audio_inputs = 1,
1004 .tuner = 0,
1005 .svhs = 2,
1006 .gpiomask = 15,
1007 .muxsel = { 2, 3, 1, 1},
1008 .audiomux = {2,0,0,0,1},
1009 .needs_tvaudio = 1,
1010 .pll = PLL_28,
1011 .tuner_type = -1,
1012 .tuner_addr = ADDR_UNSET,
1013 },{
1014 .name = "IODATA GV-BCTV3/PCI",
1015 .video_inputs = 3,
1016 .audio_inputs = 1,
1017 .tuner = 0,
1018 .svhs = 2,
1019 .gpiomask = 0x010f00,
1020 .muxsel = {2, 3, 0, 0},
1021 .audiomux = {0x10000, 0, 0x10000, 0, 0, 0},
1022 .no_msp34xx = 1,
1023 .pll = PLL_28,
1024 .tuner_type = TUNER_ALPS_TSHC6_NTSC,
1025 .tuner_addr = ADDR_UNSET,
1026 .audio_hook = gvbctv3pci_audio,
1027 },{
1028 .name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
1029 .video_inputs = 5,
1030 .audio_inputs = 1,
1031 .tuner = 0,
1032 .svhs = 3,
1033 .gpiomask = 0xAA0000,
1034 .muxsel = { 2,3,1,1,-1 },
1035 .digital_mode = DIGITAL_MODE_CAMERA,
1036 .audiomux = { 0x20000, 0, 0x80000, 0x80000, 0xa8000, 0x46000 },
1037 .no_msp34xx = 1,
1038 .pll = PLL_28,
1039 .tuner_type = TUNER_PHILIPS_PAL_I,
1040 .tuner_addr = ADDR_UNSET,
1041 .has_remote = 1,
1042 /* GPIO wiring: (different from Rev.4C !)
1043 GPIO17: U4.A0 (first hef4052bt)
1044 GPIO19: U4.A1
1045 GPIO20: U5.A1 (second hef4052bt)
1046 GPIO21: U4.nEN
1047 GPIO22: BT832 Reset Line
1048 GPIO23: A5,A0, U5,nEN
1049 Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
1050 */
1051 },{
1052 .name = "Eagle Wireless Capricorn2 (bt878A)",
1053 .video_inputs = 4,
1054 .audio_inputs = 1,
1055 .tuner = 0,
1056 .svhs = 2,
1057 .gpiomask = 7,
1058 .muxsel = { 2, 0, 1, 1},
1059 .audiomux = { 0, 1, 2, 3, 4},
1060 .pll = PLL_28,
1061 .tuner_type = -1 /* TUNER_ALPS_TMDH2_NTSC */,
1062 .tuner_addr = ADDR_UNSET,
1063 },{
1064
1065 /* ---- card 0x34 ---------------------------------- */
1066 /* David Härdeman <david@2gen.com> */
1067 .name = "Pinnacle PCTV Studio Pro",
1068 .video_inputs = 4,
1069 .audio_inputs = 1,
1070 .tuner = 0,
1071 .svhs = 3,
1072 .gpiomask = 0x03000F,
1073 .muxsel = { 2, 3, 1, 1},
1074 .audiomux = { 1, 0xd0001, 0, 0, 10},
1075 /* sound path (5 sources):
1076 MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
1077 0= ext. Audio IN
1078 1= from MUX2
1079 2= Mono TV sound from Tuner
1080 3= not connected
1081 MUX2 (mask 0x30000):
1082 0,2,3= from MSP34xx
1083 1= FM stereo Radio from Tuner */
1084 .needs_tvaudio = 0,
1085 .pll = PLL_28,
1086 .tuner_type = -1,
1087 .tuner_addr = ADDR_UNSET,
1088 },{
1089 /* Claas Langbehn <claas@bigfoot.com>,
1090 Sven Grothklags <sven@upb.de> */
1091 .name = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
1092 .video_inputs = 4,
1093 .audio_inputs = 3,
1094 .tuner = 0,
1095 .svhs = 2,
1096 .gpiomask = 0x1c,
1097 .muxsel = { 2, 3, 1, 1},
1098 .audiomux = { 0, 0, 0x10, 8, 4 },
1099 .needs_tvaudio = 1,
1100 .pll = PLL_28,
1101 .tuner_type = TUNER_PHILIPS_PAL,
1102 .tuner_addr = ADDR_UNSET,
1103 .has_radio = 1,
1104 },{
1105 /* Tim Röstermundt <rosterm@uni-muenster.de>
1106 in de.comp.os.unix.linux.hardware:
1107 options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
1108 audiomux=0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
1109 options tuner type=5 */
1110 .name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
1111 .video_inputs = 4,
1112 .audio_inputs = 1,
1113 .tuner = 0,
1114 .svhs = 2,
1115 .gpiomask = 0x18e0,
1116 .muxsel = { 2, 3, 1, 1},
1117 .audiomux = { 0x0000,0x0800,0x1000,0x1000,0x18e0 },
1118 /* For cards with tda9820/tda9821:
1119 0x0000: Tuner normal stereo
1120 0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
1121 0x0880: Tuner A2 stereo */
1122 .pll = PLL_28,
1123 .tuner_type = -1,
1124 .tuner_addr = ADDR_UNSET,
1125 },{
1126 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1127 old Easy TV BT848 version (model CPH031) */
1128 .name = "Askey CPH031/ BESTBUY Easy TV",
1129 .video_inputs = 4,
1130 .audio_inputs = 1,
1131 .tuner = 0,
1132 .svhs = 2,
1133 .gpiomask = 0xF,
1134 .muxsel = { 2, 3, 1, 0},
1135 .audiomux = { 2, 0, 0, 0, 10},
1136 .needs_tvaudio = 0,
1137 .pll = PLL_28,
1138 .tuner_type = TUNER_TEMIC_PAL,
1139 .tuner_addr = ADDR_UNSET,
1140 },{
1141
1142 /* ---- card 0x38 ---------------------------------- */
1143 /* Gordon Heydon <gjheydon@bigfoot.com ('98) */
1144 .name = "Lifeview FlyVideo 98FM LR50",
1145 .video_inputs = 4,
1146 .audio_inputs = 3,
1147 .tuner = 0,
1148 .svhs = 2,
1149 .gpiomask = 0x1800,
1150 .muxsel = { 2, 3, 1, 1},
1151 .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 },
1152 .pll = PLL_28,
1153 .tuner_type = 5,
1154 .tuner_addr = ADDR_UNSET,
1155 },{
1156 /* This is the ultimate cheapo capture card
1157 * just a BT848A on a small PCB!
1158 * Steve Hosgood <steve@equiinet.com> */
1159 .name = "GrandTec 'Grand Video Capture' (Bt848)",
1160 .video_inputs = 2,
1161 .audio_inputs = 0,
1162 .tuner = -1,
1163 .svhs = 1,
1164 .gpiomask = 0,
1165 .muxsel = { 3, 1 },
1166 .audiomux = { 0 },
1167 .needs_tvaudio = 0,
1168 .no_msp34xx = 1,
1169 .pll = PLL_35,
1170 .tuner_type = -1,
1171 .tuner_addr = ADDR_UNSET,
1172 },{
1173 /* Daniel Herrington <daniel.herrington@home.com> */
1174 .name = "Askey CPH060/ Phoebe TV Master Only (No FM)",
1175 .video_inputs = 3,
1176 .audio_inputs = 1,
1177 .tuner = 0,
1178 .svhs = 2,
1179 .gpiomask = 0xe00,
1180 .muxsel = { 2, 3, 1, 1},
1181 .audiomux = { 0x400, 0x400, 0x400, 0x400, 0x800, 0x400 },
1182 .needs_tvaudio = 1,
1183 .pll = PLL_28,
1184 .tuner_type = TUNER_TEMIC_4036FY5_NTSC,
1185 .tuner_addr = ADDR_UNSET,
1186 },{
1187 /* Matti Mottus <mottus@physic.ut.ee> */
1188 .name = "Askey CPH03x TV Capturer",
1189 .video_inputs = 4,
1190 .audio_inputs = 1,
1191 .tuner = 0,
1192 .svhs = 2,
1193 .gpiomask = 0x03000F,
1194 .muxsel = { 2, 3, 1, 0},
1195 .audiomux = { 2,0,0,0,1 },
1196 .pll = PLL_28,
1197 .tuner_type = 0,
1198 .tuner_addr = ADDR_UNSET,
1199 },{
1200
1201 /* ---- card 0x3c ---------------------------------- */
1202 /* Philip Blundell <philb@gnu.org> */
1203 .name = "Modular Technology MM100PCTV",
1204 .video_inputs = 2,
1205 .audio_inputs = 2,
1206 .tuner = 0,
1207 .svhs = -1,
1208 .gpiomask = 11,
1209 .muxsel = { 2, 3, 1, 1},
1210 .audiomux = { 2, 0, 0, 1, 8},
1211 .pll = PLL_35,
1212 .tuner_type = TUNER_TEMIC_PAL,
1213 .tuner_addr = ADDR_UNSET,
1214 },{
1215 /* Adrian Cox <adrian@humboldt.co.uk */
1216 .name = "AG Electronics GMV1",
1217 .video_inputs = 2,
1218 .audio_inputs = 0,
1219 .tuner = -1,
1220 .svhs = 1,
1221 .gpiomask = 0xF,
1222 .muxsel = { 2, 2},
1223 .audiomux = { },
1224 .no_msp34xx = 1,
1225 .needs_tvaudio = 0,
1226 .pll = PLL_28,
1227 .tuner_type = -1,
1228 .tuner_addr = ADDR_UNSET,
1229 },{
1230 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1231 new Easy TV BT878 version (model CPH061)
1232 special thanks to Informatica Mieres for providing the card */
1233 .name = "Askey CPH061/ BESTBUY Easy TV (bt878)",
1234 .video_inputs = 3,
1235 .audio_inputs = 2,
1236 .tuner = 0,
1237 .svhs = 2,
1238 .gpiomask = 0xFF,
1239 .muxsel = { 2, 3, 1, 0},
1240 .audiomux = { 1, 0, 4, 4, 9},
1241 .needs_tvaudio = 0,
1242 .pll = PLL_28,
1243 .tuner_type = TUNER_PHILIPS_PAL,
1244 .tuner_addr = ADDR_UNSET,
1245 },{
1246 /* Lukas Gebauer <geby@volny.cz> */
1247 .name = "ATI TV-Wonder",
1248 .video_inputs = 3,
1249 .audio_inputs = 1,
1250 .tuner = 0,
1251 .svhs = 2,
1252 .gpiomask = 0xf03f,
1253 .muxsel = { 2, 3, 1, 0 },
1254 .audiomux = { 0xbffe, 0, 0xbfff, 0, 0xbffe},
1255 .pll = PLL_28,
1256 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
1257 .tuner_addr = ADDR_UNSET,
1258 },{
1259
1260 /* ---- card 0x40 ---------------------------------- */
1261 /* Lukas Gebauer <geby@volny.cz> */
1262 .name = "ATI TV-Wonder VE",
1263 .video_inputs = 2,
1264 .audio_inputs = 1,
1265 .tuner = 0,
1266 .svhs = -1,
1267 .gpiomask = 1,
1268 .muxsel = { 2, 3, 0, 1},
1269 .audiomux = { 0, 0, 1, 0, 0},
1270 .no_msp34xx = 1,
1271 .pll = PLL_28,
1272 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
1273 .tuner_addr = ADDR_UNSET,
1274 },{
1275 /* DeeJay <deejay@westel900.net (2000S) */
1276 .name = "Lifeview FlyVideo 2000S LR90",
1277 .video_inputs = 3,
1278 .audio_inputs = 3,
1279 .tuner = 0,
1280 .svhs = 2,
1281 .gpiomask = 0x18e0,
1282 .muxsel = { 2, 3, 0, 1},
1283 /* Radio changed from 1e80 to 0x800 to make
1284 FlyVideo2000S in .hu happy (gm)*/
1285 /* -dk-???: set mute=0x1800 for tda9874h daughterboard */
1286 .audiomux = { 0x0000,0x0800,0x1000,0x1000,0x1800, 0x1080 },
1287 .audio_hook = fv2000s_audio,
1288 .no_msp34xx = 1,
1289 .no_tda9875 = 1,
1290 .needs_tvaudio = 1,
1291 .pll = PLL_28,
1292 .tuner_type = 5,
1293 .tuner_addr = ADDR_UNSET,
1294 },{
1295 .name = "Terratec TValueRadio",
1296 .video_inputs = 3,
1297 .audio_inputs = 1,
1298 .tuner = 0,
1299 .svhs = 2,
1300 .gpiomask = 0xffff00,
1301 .muxsel = { 2, 3, 1, 1},
1302 .audiomux = { 0x500, 0x500, 0x300, 0x900, 0x900},
1303 .needs_tvaudio = 1,
1304 .pll = PLL_28,
1305 .tuner_type = TUNER_PHILIPS_PAL,
1306 .tuner_addr = ADDR_UNSET,
1307 .has_radio = 1,
1308 },{
1309 /* TANAKA Kei <peg00625@nifty.com> */
1310 .name = "IODATA GV-BCTV4/PCI",
1311 .video_inputs = 3,
1312 .audio_inputs = 1,
1313 .tuner = 0,
1314 .svhs = 2,
1315 .gpiomask = 0x010f00,
1316 .muxsel = {2, 3, 0, 0},
1317 .audiomux = {0x10000, 0, 0x10000, 0, 0, 0},
1318 .no_msp34xx = 1,
1319 .pll = PLL_28,
1320 .tuner_type = TUNER_SHARP_2U5JF5540_NTSC,
1321 .tuner_addr = ADDR_UNSET,
1322 .audio_hook = gvbctv3pci_audio,
1323 },{
1324
1325 /* ---- card 0x44 ---------------------------------- */
1326 .name = "3Dfx VoodooTV FM (Euro), VoodooTV 200 (USA)",
1327 /* try "insmod msp3400 simple=0" if you have
1328 * sound problems with this card. */
1329 .video_inputs = 4,
1330 .audio_inputs = 1,
1331 .tuner = 0,
1332 .svhs = -1,
1333 .gpiomask = 0x4f8a00,
1334 /* 0x100000: 1=MSP enabled (0=disable again)
1335 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1336 .audiomux = {0x947fff, 0x987fff,0x947fff,0x947fff, 0x947fff},
1337 /* tvtuner, radio, external,internal, mute, stereo
1338 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1339 .muxsel = { 2, 3 ,0 ,1},
1340 .tuner_type = TUNER_MT2032,
1341 .tuner_addr = ADDR_UNSET,
1342 .pll = PLL_28,
1343 .has_radio = 1,
1344 },{
1345 /* Philip Blundell <pb@nexus.co.uk> */
1346 .name = "Active Imaging AIMMS",
1347 .video_inputs = 1,
1348 .audio_inputs = 0,
1349 .tuner = -1,
1350 .tuner_type = -1,
1351 .tuner_addr = ADDR_UNSET,
1352 .pll = PLL_28,
1353 .muxsel = { 2 },
1354 .gpiomask = 0
1355 },{
1356 /* Tomasz Pyra <hellfire@sedez.iq.pl> */
1357 .name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
1358 .video_inputs = 3,
1359 .audio_inputs = 4,
1360 .tuner = 0,
1361 .svhs = 2,
1362 .gpiomask = 15,
1363 .muxsel = { 2, 3, 1, 1},
1364 .audiomux = { 0, 0, 11, 7, 13, 0}, /* TV and Radio with same GPIO ! */
1365 .needs_tvaudio = 1,
1366 .pll = PLL_28,
1367 .tuner_type = 25,
1368 .tuner_addr = ADDR_UNSET,
1369 .has_remote = 1,
1370 /* GPIO wiring:
1371 GPIO0: U4.A0 (hef4052bt)
1372 GPIO1: U4.A1
1373 GPIO2: U4.A1 (second hef4052bt)
1374 GPIO3: U4.nEN, U5.A0, A5.nEN
1375 GPIO8-15: vrd866b ?
1376 */
1377 },{
1378 .name = "Lifeview FlyVideo 98EZ (capture only) LR51",
1379 .video_inputs = 4,
1380 .audio_inputs = 0,
1381 .tuner = -1,
1382 .svhs = 2,
1383 .muxsel = { 2, 3, 1, 1}, /* AV1, AV2, SVHS, CVid adapter on SVHS */
1384 .pll = PLL_28,
1385 .no_msp34xx = 1,
1386 .tuner_type = UNSET,
1387 .tuner_addr = ADDR_UNSET,
1388 },{
1389
1390 /* ---- card 0x48 ---------------------------------- */
1391 /* Dariusz Kowalewski <darekk@automex.pl> */
1392 .name = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
1393 .video_inputs = 4,
1394 .audio_inputs = 1,
1395 .tuner = 0,
1396 .svhs = 2,
1397 .gpiomask = 0x3f,
1398 .muxsel = { 2, 3, 1, 1 },
1399 .audiomux = { 0x01, 0x00, 0x03, 0x03, 0x09, 0x02 },
1400 .needs_tvaudio = 1,
1401 .no_msp34xx = 1,
1402 .no_tda9875 = 1,
1403 .pll = PLL_28,
1404 .tuner_type = 5,
1405 .tuner_addr = ADDR_UNSET,
1406 .audio_hook = pvbt878p9b_audio, /* Note: not all cards have stereo */
1407 .has_radio = 1, /* Note: not all cards have radio */
1408 .has_remote = 1,
1409 /* GPIO wiring:
1410 GPIO0: A0 hef4052
1411 GPIO1: A1 hef4052
1412 GPIO3: nEN hef4052
1413 GPIO8-15: vrd866b
1414 GPIO20,22,23: R30,R29,R28
1415 */
1416 },{
1417 /* Clay Kunz <ckunz@mail.arc.nasa.gov> */
1418 /* you must jumper JP5 for the card to work */
1419 .name = "Sensoray 311",
1420 .video_inputs = 5,
1421 .audio_inputs = 0,
1422 .tuner = -1,
1423 .svhs = 4,
1424 .gpiomask = 0,
1425 .muxsel = { 2, 3, 1, 0, 0},
1426 .audiomux = { 0 },
1427 .needs_tvaudio = 0,
1428 .tuner_type = -1,
1429 .tuner_addr = ADDR_UNSET,
1430 },{
1431 /* Miguel Freitas <miguel@cetuc.puc-rio.br> */
1432 .name = "RemoteVision MX (RV605)",
1433 .video_inputs = 16,
1434 .audio_inputs = 0,
1435 .tuner = -1,
1436 .svhs = -1,
1437 .gpiomask = 0x00,
1438 .gpiomask2 = 0x07ff,
1439 .muxsel = { 0x33, 0x13, 0x23, 0x43, 0xf3, 0x73, 0xe3, 0x03,
1440 0xd3, 0xb3, 0xc3, 0x63, 0x93, 0x53, 0x83, 0xa3 },
1441 .no_msp34xx = 1,
1442 .no_tda9875 = 1,
1443 .tuner_type = -1,
1444 .tuner_addr = ADDR_UNSET,
1445 .muxsel_hook = rv605_muxsel,
1446 },{
1447 .name = "Powercolor MTV878/ MTV878R/ MTV878F",
1448 .video_inputs = 3,
1449 .audio_inputs = 2,
1450 .tuner = 0,
1451 .svhs = 2,
1452 .gpiomask = 0x1C800F, /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
1453 .muxsel = { 2, 1, 1, },
1454 .audiomux = { 0, 1, 2, 2, 4 },
1455 .needs_tvaudio = 0,
1456 .tuner_type = TUNER_PHILIPS_PAL,
1457 .tuner_addr = ADDR_UNSET,
1458 .pll = PLL_28,
1459 .has_radio = 1,
1460 },{
1461
1462 /* ---- card 0x4c ---------------------------------- */
1463 /* Masaki Suzuki <masaki@btree.org> */
1464 .name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
1465 .video_inputs = 3,
1466 .audio_inputs = 1,
1467 .tuner = 0,
1468 .svhs = 2,
1469 .gpiomask = 0x140007,
1470 .muxsel = { 2, 3, 1, 1 },
1471 .audiomux = { 0, 1, 2, 3, 4, 0 },
1472 .tuner_type = TUNER_PHILIPS_NTSC,
1473 .tuner_addr = ADDR_UNSET,
1474 .audio_hook = windvr_audio,
1475 },{
1476 .name = "GrandTec Multi Capture Card (Bt878)",
1477 .video_inputs = 4,
1478 .audio_inputs = 0,
1479 .tuner = -1,
1480 .svhs = -1,
1481 .gpiomask = 0,
1482 .muxsel = { 2, 3, 1, 0 },
1483 .audiomux = { 0 },
1484 .needs_tvaudio = 0,
1485 .no_msp34xx = 1,
1486 .pll = PLL_28,
1487 .tuner_type = -1,
1488 .tuner_addr = ADDR_UNSET,
1489 },{
1490 .name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
1491 .video_inputs = 4,
1492 .audio_inputs = 3,
1493 .tuner = 0,
1494 .svhs = 2,
1495 .gpiomask = 7,
1496 .muxsel = { 2, 3, 1, 1 }, /* Tuner, SVid, SVHS, SVid to SVHS connector */
1497 .audiomux = { 0 ,0 ,4, 4,4,4},/* Yes, this tuner uses the same audio output for TV and FM radio!
1498 * This card lacks external Audio In, so we mute it on Ext. & Int.
1499 * The PCB can take a sbx1637/sbx1673, wiring unknown.
1500 * This card lacks PCI subsystem ID, sigh.
1501 * audiomux=1: lower volume, 2+3: mute
1502 * btwincap uses 0x80000/0x80003
1503 */
1504 .needs_tvaudio = 0,
1505 .no_msp34xx = 1,
1506 .pll = PLL_28,
1507 .tuner_type = 5,
1508 .tuner_addr = ADDR_UNSET,
1509 /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
1510 radio signal strength indicators work fine. */
1511 .has_radio = 1,
1512 /* GPIO Info:
1513 GPIO0,1: HEF4052 A0,A1
1514 GPIO2: HEF4052 nENABLE
1515 GPIO3-7: n.c.
1516 GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
1517 GPIO14,15: ??
1518 GPIO16-21: n.c.
1519 GPIO22,23: ??
1520 ?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
1521 },{
1522 /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
1523 .name = "DSP Design TCVIDEO",
1524 .video_inputs = 4,
1525 .svhs = -1,
1526 .muxsel = { 2, 3, 1, 0},
1527 .pll = PLL_28,
1528 .tuner_type = -1,
1529 .tuner_addr = ADDR_UNSET,
1530 },{
1531
1532 /* ---- card 0x50 ---------------------------------- */
1533 .name = "Hauppauge WinTV PVR",
1534 .video_inputs = 4,
1535 .audio_inputs = 1,
1536 .tuner = 0,
1537 .svhs = 2,
1538 .muxsel = { 2, 0, 1, 1},
1539 .needs_tvaudio = 1,
1540 .pll = PLL_28,
1541 .tuner_type = -1,
1542 .tuner_addr = ADDR_UNSET,
1543
1544 .gpiomask = 7,
1545 .audiomux = {7},
1546 },{
1547 .name = "IODATA GV-BCTV5/PCI",
1548 .video_inputs = 3,
1549 .audio_inputs = 1,
1550 .tuner = 0,
1551 .svhs = 2,
1552 .gpiomask = 0x0f0f80,
1553 .muxsel = {2, 3, 1, 0},
1554 .audiomux = {0x030000, 0x010000, 0, 0, 0x020000, 0},
1555 .no_msp34xx = 1,
1556 .pll = PLL_28,
1557 .tuner_type = TUNER_PHILIPS_NTSC_M,
1558 .tuner_addr = ADDR_UNSET,
1559 .audio_hook = gvbctv5pci_audio,
1560 .has_radio = 1,
1561 },{
1562 .name = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
1563 .video_inputs = 4, /* id-inputs-clock */
1564 .audio_inputs = 0,
1565 .tuner = -1,
1566 .svhs = 3,
1567 .muxsel = { 3, 2, 0, 1 },
1568 .pll = PLL_28,
1569 .tuner_type = -1,
1570 .tuner_addr = ADDR_UNSET,
1571 .no_msp34xx = 1,
1572 .no_tda9875 = 1,
1573 .no_tda7432 = 1,
1574 },{
1575 .name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
1576 .video_inputs = 3,
1577 .audio_inputs = 0,
1578 .tuner = -1,
1579 .svhs = 2,
1580 .muxsel = { 2, 3, 1 },
1581 .pll = PLL_28,
1582 .tuner_type = -1,
1583 .tuner_addr = ADDR_UNSET,
1584 .no_msp34xx = 1,
1585 .no_tda9875 = 1,
1586 .no_tda7432 = 1,
1587 },{
1588
1589 /* ---- card 0x54 ---------------------------------- */
1590 .name = "Osprey 101 (848)", /* 0x05-40C0-C1 */
1591 .video_inputs = 2,
1592 .audio_inputs = 0,
1593 .tuner = -1,
1594 .svhs = 1,
1595 .muxsel = { 3, 1 },
1596 .pll = PLL_28,
1597 .tuner_type = -1,
1598 .tuner_addr = ADDR_UNSET,
1599 .no_msp34xx = 1,
1600 .no_tda9875 = 1,
1601 .no_tda7432 = 1,
1602 },{
1603 .name = "Osprey 101/151", /* 0x1(4|5)-0004-C4 */
1604 .video_inputs = 1,
1605 .audio_inputs = 0,
1606 .tuner = -1,
1607 .svhs = -1,
1608 .muxsel = { 0 },
1609 .pll = PLL_28,
1610 .tuner_type = -1,
1611 .tuner_addr = ADDR_UNSET,
1612 .no_msp34xx = 1,
1613 .no_tda9875 = 1,
1614 .no_tda7432 = 1,
1615 },{
1616 .name = "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */
1617 .video_inputs = 2,
1618 .audio_inputs = 0,
1619 .tuner = -1,
1620 .svhs = 1,
1621 .muxsel = { 0, 1 },
1622 .pll = PLL_28,
1623 .tuner_type = -1,
1624 .tuner_addr = ADDR_UNSET,
1625 .no_msp34xx = 1,
1626 .no_tda9875 = 1,
1627 .no_tda7432 = 1,
1628 },{
1629 .name = "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */
1630 .video_inputs = 1,
1631 .audio_inputs = 1,
1632 .tuner = -1,
1633 .svhs = -1,
1634 .muxsel = { 0 },
1635 .pll = PLL_28,
1636 .tuner_type = UNSET,
1637 .tuner_addr = ADDR_UNSET,
1638 .no_msp34xx = 1,
1639 .no_tda9875 = 1,
1640 .no_tda7432 = 1,
1641 },{
1642
1643 /* ---- card 0x58 ---------------------------------- */
1644 .name = "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */
1645 .video_inputs = 2,
1646 .audio_inputs = 1,
1647 .tuner = -1,
1648 .svhs = 1,
1649 .muxsel = { 0, 1 },
1650 .pll = PLL_28,
1651 .tuner_type = UNSET,
1652 .tuner_addr = ADDR_UNSET,
1653 .no_msp34xx = 1,
1654 .no_tda9875 = 1,
1655 .no_tda7432 = 1,
1656 },{
1657 .name = "Osprey 210/220", /* 0x1(A|B)-04C0-C1 */
1658 .video_inputs = 2,
1659 .audio_inputs = 1,
1660 .tuner = -1,
1661 .svhs = 1,
1662 .muxsel = { 2, 3 },
1663 .pll = PLL_28,
1664 .tuner_type = UNSET,
1665 .tuner_addr = ADDR_UNSET,
1666 .no_msp34xx = 1,
1667 .no_tda9875 = 1,
1668 .no_tda7432 = 1,
1669 },{
1670 .name = "Osprey 500", /* 500 */
1671 .video_inputs = 2,
1672 .audio_inputs = 1,
1673 .tuner = -1,
1674 .svhs = 1,
1675 .muxsel = { 2, 3 },
1676 .pll = PLL_28,
1677 .tuner_type = -1,
1678 .tuner_addr = ADDR_UNSET,
1679 .no_msp34xx = 1,
1680 .no_tda9875 = 1,
1681 .no_tda7432 = 1,
1682 },{
1683 .name = "Osprey 540", /* 540 */
1684 .video_inputs = 4,
1685 .audio_inputs = 1,
1686 .tuner = -1,
1687 .pll = PLL_28,
1688 .tuner_type = -1,
1689 .tuner_addr = ADDR_UNSET,
1690 .no_msp34xx = 1,
1691 .no_tda9875 = 1,
1692 .no_tda7432 = 1,
1693 },{
1694
1695 /* ---- card 0x5C ---------------------------------- */
1696 .name = "Osprey 2000", /* 2000 */
1697 .video_inputs = 2,
1698 .audio_inputs = 1,
1699 .tuner = -1,
1700 .svhs = 1,
1701 .muxsel = { 2, 3 },
1702 .pll = PLL_28,
1703 .tuner_type = UNSET,
1704 .tuner_addr = ADDR_UNSET,
1705 .no_msp34xx = 1,
1706 .no_tda9875 = 1,
1707 .no_tda7432 = 1, /* must avoid, conflicts with the bt860 */
1708 },{
1709 /* M G Berberich <berberic@forwiss.uni-passau.de> */
1710 .name = "IDS Eagle",
1711 .video_inputs = 4,
1712 .audio_inputs = 0,
1713 .tuner = -1,
1714 .tuner_type = -1,
1715 .tuner_addr = ADDR_UNSET,
1716 .svhs = -1,
1717 .gpiomask = 0,
1718 .muxsel = { 0, 1, 2, 3 },
1719 .muxsel_hook = eagle_muxsel,
1720 .no_msp34xx = 1,
1721 .no_tda9875 = 1,
1722 .pll = PLL_28,
1723 },{
1724 .name = "Pinnacle PCTV Sat",
1725 .video_inputs = 2,
1726 .audio_inputs = 0,
1727 .svhs = 1,
1728 .tuner = -1,
1729 .tuner_type = -1,
1730 .tuner_addr = ADDR_UNSET,
1731 .no_msp34xx = 1,
1732 .no_tda9875 = 1,
1733 .no_tda7432 = 1,
1734 .gpiomask = 0x01,
1735 .audiomux = { 0, 0, 0, 0, 1 },
1736 .muxsel = { 3, 0, 1, 2},
1737 .needs_tvaudio = 0,
1738 .pll = PLL_28,
1739 .no_gpioirq = 1,
1740 .has_dvb = 1,
1741 },{
1742 .name = "Formac ProTV II (bt878)",
1743 .video_inputs = 4,
1744 .audio_inputs = 1,
1745 .tuner = 0,
1746 .svhs = 3,
1747 .gpiomask = 2,
1748 /* TV, Comp1, Composite over SVID con, SVID */
1749 .muxsel = { 2, 3, 1, 1},
1750 .audiomux = { 2, 2, 0, 0, 0 },
1751 .pll = PLL_28,
1752 .has_radio = 1,
1753 .tuner_type = TUNER_PHILIPS_PAL,
1754 .tuner_addr = ADDR_UNSET,
1755 /* sound routing:
1756 GPIO=0x00,0x01,0x03: mute (?)
1757 0x02: both TV and radio (tuner: FM1216/I)
1758 The card has onboard audio connectors labeled "cdrom" and "board",
1759 not soldered here, though unknown wiring.
1760 Card lacks: external audio in, pci subsystem id.
1761 */
1762 },{
1763
1764 /* ---- card 0x60 ---------------------------------- */
1765 .name = "MachTV",
1766 .video_inputs = 3,
1767 .audio_inputs = 1,
1768 .tuner = 0,
1769 .svhs = -1,
1770 .gpiomask = 7,
1771 .muxsel = { 2, 3, 1, 1},
1772 .audiomux = { 0, 1, 2, 3, 4},
1773 .needs_tvaudio = 1,
1774 .tuner_type = 5,
1775 .tuner_addr = ADDR_UNSET,
1776 .pll = 1,
1777 },{
1778 .name = "Euresys Picolo",
1779 .video_inputs = 3,
1780 .audio_inputs = 0,
1781 .tuner = -1,
1782 .svhs = 2,
1783 .gpiomask = 0,
1784 .no_msp34xx = 1,
1785 .no_tda9875 = 1,
1786 .no_tda7432 = 1,
1787 .muxsel = { 2, 0, 1},
1788 .pll = PLL_28,
1789 .tuner_type = UNSET,
1790 .tuner_addr = ADDR_UNSET,
1791 },{
1792 /* Luc Van Hoeylandt <luc@e-magic.be> */
1793 .name = "ProVideo PV150", /* 0x4f */
1794 .video_inputs = 2,
1795 .audio_inputs = 0,
1796 .tuner = -1,
1797 .svhs = -1,
1798 .gpiomask = 0,
1799 .muxsel = { 2, 3 },
1800 .audiomux = { 0 },
1801 .needs_tvaudio = 0,
1802 .no_msp34xx = 1,
1803 .pll = PLL_28,
1804 .tuner_type = UNSET,
1805 .tuner_addr = ADDR_UNSET,
1806 },{
1807 /* Hiroshi Takekawa <sian@big.or.jp> */
1808 /* This card lacks subsystem ID */
1809 .name = "AD-TVK503", /* 0x63 */
1810 .video_inputs = 4,
1811 .audio_inputs = 1,
1812 .tuner = 0,
1813 .svhs = 2,
1814 .gpiomask = 0x001e8007,
1815 .muxsel = { 2, 3, 1, 0 },
1816 /* Tuner, Radio, external, internal, off, on */
1817 .audiomux = { 0x08, 0x0f, 0x0a, 0x08, 0x0f, 0x08 },
1818 .needs_tvaudio = 0,
1819 .no_msp34xx = 1,
1820 .pll = PLL_28,
1821 .tuner_type = 2,
1822 .tuner_addr = ADDR_UNSET,
1823 .audio_hook = adtvk503_audio,
1824 },{
1825
1826 /* ---- card 0x64 ---------------------------------- */
1827 .name = "Hercules Smart TV Stereo",
1828 .video_inputs = 4,
1829 .audio_inputs = 1,
1830 .tuner = 0,
1831 .svhs = 2,
1832 .gpiomask = 0x00,
1833 .muxsel = { 2, 3, 1, 1 },
1834 .needs_tvaudio = 1,
1835 .no_msp34xx = 1,
1836 .pll = PLL_28,
1837 .tuner_type = 5,
1838 .tuner_addr = ADDR_UNSET,
1839 /* Notes:
1840 - card lacks subsystem ID
1841 - stereo variant w/ daughter board with tda9874a @0xb0
1842 - Audio Routing:
1843 always from tda9874 independent of GPIO (?)
1844 external line in: unknown
1845 - Other chips: em78p156elp @ 0x96 (probably IR remote control)
1846 hef4053 (instead 4052) for unknown function
1847 */
1848 },{
1849 .name = "Pace TV & Radio Card",
1850 .video_inputs = 4,
1851 .audio_inputs = 1,
1852 .tuner = 0,
1853 .svhs = 2,
1854 .muxsel = { 2, 3, 1, 1}, /* Tuner, CVid, SVid, CVid over SVid connector */
1855 .gpiomask = 0,
1856 .no_tda9875 = 1,
1857 .no_tda7432 = 1,
1858 .tuner_type = 1,
1859 .tuner_addr = ADDR_UNSET,
1860 .has_radio = 1,
1861 .pll = PLL_28,
1862 /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
1863 only internal line out: (4pin header) RGGL
1864 Radio must be decoded by msp3410d (not routed through)*/
1865 /*
1866 .digital_mode = DIGITAL_MODE_CAMERA, todo!
1867 */
1868 },{
1869 /* Chris Willing <chris@vislab.usyd.edu.au> */
1870 .name = "IVC-200",
1871 .video_inputs = 1,
1872 .audio_inputs = 0,
1873 .tuner = -1,
1874 .tuner_type = -1,
1875 .tuner_addr = ADDR_UNSET,
1876 .svhs = -1,
1877 .gpiomask = 0xdf,
1878 .muxsel = { 2 },
1879 .pll = PLL_28,
1880 },{
1881 .name = "Grand X-Guard / Trust 814PCI",
1882 .video_inputs = 16,
1883 .audio_inputs = 0,
1884 .tuner = -1,
1885 .svhs = -1,
1886 .tuner_type = 4,
1887 .tuner_addr = ADDR_UNSET,
1888 .gpiomask2 = 0xff,
1889 .muxsel = { 2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0 },
1890 .muxsel_hook = xguard_muxsel,
1891 .no_msp34xx = 1,
1892 .no_tda9875 = 1,
1893 .no_tda7432 = 1,
1894 .pll = PLL_28,
1895 },{
1896
1897 /* ---- card 0x68 ---------------------------------- */
1898 .name = "Nebula Electronics DigiTV",
1899 .video_inputs = 1,
1900 .tuner = -1,
1901 .svhs = -1,
1902 .muxsel = { 2, 3, 1, 0},
1903 .no_msp34xx = 1,
1904 .no_tda9875 = 1,
1905 .no_tda7432 = 1,
1906 .pll = PLL_28,
1907 .tuner_type = -1,
1908 .tuner_addr = ADDR_UNSET,
1909 .has_dvb = 1,
1910 .no_gpioirq = 1,
1911 },{
1912 /* Jorge Boncompte - DTI2 <jorge@dti2.net> */
1913 .name = "ProVideo PV143",
1914 .video_inputs = 4,
1915 .audio_inputs = 0,
1916 .tuner = -1,
1917 .svhs = -1,
1918 .gpiomask = 0,
1919 .muxsel = { 2, 3, 1, 0 },
1920 .audiomux = { 0 },
1921 .needs_tvaudio = 0,
1922 .no_msp34xx = 1,
1923 .pll = PLL_28,
1924 .tuner_type = -1,
1925 .tuner_addr = ADDR_UNSET,
1926 },{
1927 /* M.Klahr@phytec.de */
1928 .name = "PHYTEC VD-009-X1 MiniDIN (bt878)",
1929 .video_inputs = 4,
1930 .audio_inputs = 0,
1931 .tuner = -1, /* card has no tuner */
1932 .svhs = 3,
1933 .gpiomask = 0x00,
1934 .muxsel = { 2, 3, 1, 0},
1935 .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
1936 .needs_tvaudio = 1,
1937 .pll = PLL_28,
1938 .tuner_type = -1,
1939 .tuner_addr = ADDR_UNSET,
1940 },{
1941 .name = "PHYTEC VD-009-X1 Combi (bt878)",
1942 .video_inputs = 4,
1943 .audio_inputs = 0,
1944 .tuner = -1, /* card has no tuner */
1945 .svhs = 3,
1946 .gpiomask = 0x00,
1947 .muxsel = { 2, 3, 1, 1},
1948 .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
1949 .needs_tvaudio = 1,
1950 .pll = PLL_28,
1951 .tuner_type = -1,
1952 .tuner_addr = ADDR_UNSET,
1953 },{
1954
1955 /* ---- card 0x6c ---------------------------------- */
1956 .name = "PHYTEC VD-009 MiniDIN (bt878)",
1957 .video_inputs = 10,
1958 .audio_inputs = 0,
1959 .tuner = -1, /* card has no tuner */
1960 .svhs = 9,
1961 .gpiomask = 0x00,
1962 .gpiomask2 = 0x03, /* gpiomask2 defines the bits used to switch audio
1963 via the upper nibble of muxsel. here: used for
1964 xternal video-mux */
1965 .muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x00 },
1966 .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
1967 .needs_tvaudio = 1,
1968 .pll = PLL_28,
1969 .tuner_type = -1,
1970 .tuner_addr = ADDR_UNSET,
1971 },{
1972 .name = "PHYTEC VD-009 Combi (bt878)",
1973 .video_inputs = 10,
1974 .audio_inputs = 0,
1975 .tuner = -1, /* card has no tuner */
1976 .svhs = 9,
1977 .gpiomask = 0x00,
1978 .gpiomask2 = 0x03, /* gpiomask2 defines the bits used to switch audio
1979 via the upper nibble of muxsel. here: used for
1980 xternal video-mux */
1981 .muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x01 },
1982 .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
1983 .needs_tvaudio = 1,
1984 .pll = PLL_28,
1985 .tuner_type = -1,
1986 .tuner_addr = ADDR_UNSET,
1987 },{
1988 .name = "IVC-100",
1989 .video_inputs = 4,
1990 .audio_inputs = 0,
1991 .tuner = -1,
1992 .tuner_type = -1,
1993 .tuner_addr = ADDR_UNSET,
1994 .svhs = -1,
1995 .gpiomask = 0xdf,
1996 .muxsel = { 2, 3, 1, 0 },
1997 .pll = PLL_28,
1998 },{
1999 /* IVC-120G - Alan Garfield <alan@fromorbit.com> */
2000 .name = "IVC-120G",
2001 .video_inputs = 16,
2002 .audio_inputs = 0, /* card has no audio */
2003 .tuner = -1, /* card has no tuner */
2004 .tuner_type = -1,
2005 .tuner_addr = ADDR_UNSET,
2006 .svhs = -1, /* card has no svhs */
2007 .needs_tvaudio = 0,
2008 .no_msp34xx = 1,
2009 .no_tda9875 = 1,
2010 .no_tda7432 = 1,
2011 .gpiomask = 0x00,
2012 .muxsel = { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
2013 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 },
2014 .muxsel_hook = ivc120_muxsel,
2015 .pll = PLL_28,
2016 },{
2017
2018 /* ---- card 0x70 ---------------------------------- */
2019 .name = "pcHDTV HD-2000 TV",
2020 .video_inputs = 4,
2021 .audio_inputs = 1,
2022 .tuner = 0,
2023 .svhs = 2,
2024 .muxsel = { 2, 3, 1, 0},
2025 .tuner_type = TUNER_PHILIPS_ATSC,
2026 .tuner_addr = ADDR_UNSET,
2027 .has_dvb = 1,
2028 },{
2029 .name = "Twinhan DST + clones",
2030 .no_msp34xx = 1,
2031 .no_tda9875 = 1,
2032 .no_tda7432 = 1,
2033 .tuner_type = TUNER_ABSENT,
2034 .tuner_addr = ADDR_UNSET,
2035 .no_video = 1,
2036 .has_dvb = 1,
2037 },{
2038 .name = "Winfast VC100",
2039 .video_inputs = 3,
2040 .audio_inputs = 0,
2041 .svhs = 1,
2042 .tuner = -1,
2043 .muxsel = { 3, 1, 1, 3}, /* Vid In, SVid In, Vid over SVid in connector */
2044 .no_msp34xx = 1,
2045 .no_tda9875 = 1,
2046 .no_tda7432 = 1,
2047 .tuner_type = TUNER_ABSENT,
2048 .tuner_addr = ADDR_UNSET,
2049 .pll = PLL_28,
2050 },{
2051 .name = "Teppro TEV-560/InterVision IV-560",
2052 .video_inputs = 3,
2053 .audio_inputs = 1,
2054 .tuner = 0,
2055 .svhs = 2,
2056 .gpiomask = 3,
2057 .muxsel = { 2, 3, 1, 1},
2058 .audiomux = { 1, 1, 1, 1, 0},
2059 .needs_tvaudio = 1,
2060 .tuner_type = TUNER_PHILIPS_PAL,
2061 .tuner_addr = ADDR_UNSET,
2062 .pll = PLL_35,
2063 },{
2064
2065 /* ---- card 0x74 ---------------------------------- */
2066 .name = "SIMUS GVC1100",
2067 .video_inputs = 4,
2068 .audio_inputs = 0,
2069 .tuner = -1,
2070 .svhs = -1,
2071 .tuner_type = -1,
2072 .tuner_addr = ADDR_UNSET,
2073 .pll = PLL_28,
2074 .muxsel = { 2, 2, 2, 2},
2075 .gpiomask = 0x3F,
2076 .muxsel_hook = gvc1100_muxsel,
2077 },{
2078 /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
2079 .name = "NGS NGSTV+",
2080 .video_inputs = 3,
2081 .tuner = 0,
2082 .svhs = 2,
2083 .gpiomask = 0x008007,
2084 .muxsel = {2, 3, 0, 0},
2085 .audiomux = {0, 0, 0, 0, 0x000003, 0},
2086 .pll = PLL_28,
2087 .tuner_type = TUNER_PHILIPS_PAL,
2088 .tuner_addr = ADDR_UNSET,
2089 .has_remote = 1,
2090 },{
2091 /* http://linuxmedialabs.com */
2092 .name = "LMLBT4",
2093 .video_inputs = 4, /* IN1,IN2,IN3,IN4 */
2094 .audio_inputs = 0,
2095 .tuner = -1,
2096 .svhs = -1,
2097 .muxsel = { 2, 3, 1, 0 },
2098 .no_msp34xx = 1,
2099 .no_tda9875 = 1,
2100 .no_tda7432 = 1,
2101 .needs_tvaudio = 0,
2102 .tuner_type = -1,
2103 .tuner_addr = ADDR_UNSET,
2104 },{
2105 /* Helmroos Harri <harri.helmroos@pp.inet.fi> */
2106 .name = "Tekram M205 PRO",
2107 .video_inputs = 3,
2108 .audio_inputs = 1,
2109 .tuner = 0,
2110 .tuner_type = TUNER_PHILIPS_PAL,
2111 .tuner_addr = ADDR_UNSET,
2112 .svhs = 2,
2113 .needs_tvaudio = 0,
2114 .gpiomask = 0x68,
2115 .muxsel = { 2, 3, 1},
2116 .audiomux = { 0x68, 0x68, 0x61, 0x61, 0x00 },
2117 .pll = PLL_28,
2118 },{
2119
2120 /* ---- card 0x78 ---------------------------------- */
2121 /* Javier Cendan Ares <jcendan@lycos.es> */
2122 /* bt878 TV + FM without subsystem ID */
2123 .name = "Conceptronic CONTVFMi",
2124 .video_inputs = 3,
2125 .audio_inputs = 1,
2126 .tuner = 0,
2127 .svhs = 2,
2128 .gpiomask = 0x008007,
2129 .muxsel = { 2, 3, 1, 1 },
2130 .audiomux = { 0, 1, 2, 2, 3 },
2131 .needs_tvaudio = 0,
2132 .pll = PLL_28,
2133 .tuner_type = TUNER_PHILIPS_PAL,
2134 .tuner_addr = ADDR_UNSET,
2135 .has_remote = 1,
2136 .has_radio = 1,
2137 },{
2138 /*Eric DEBIEF <debief@telemsa.com>*/
2139 /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controled*/
2140 /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the folowing declaration strucure, and #define BTTV_PICOLO_TETRA_CHIP*/
2141 /*0x79 in bttv.h*/
2142 .name = "Euresys Picolo Tetra",
2143 .video_inputs = 4,
2144 .audio_inputs = 0,
2145 .tuner = -1,
2146 .svhs = -1,
2147 .gpiomask = 0,
2148 .gpiomask2 = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
2149 .no_msp34xx = 1,
2150 .no_tda9875 = 1,
2151 .no_tda7432 = 1,
2152 .muxsel = {2,2,2,2},/*878A input is always MUX0, see above.*/
2153 .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
2154 .pll = PLL_28,
2155 .needs_tvaudio = 0,
2156 .muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
2157 .tuner_type = -1,
2158 .tuner_addr = ADDR_UNSET,
2159 },{
2160 /* Spirit TV Tuner from http://spiritmodems.com.au */
2161 /* Stafford Goodsell <surge@goliath.homeunix.org> */
2162 .name = "Spirit TV Tuner",
2163 .video_inputs = 3,
2164 .audio_inputs = 1,
2165 .tuner = 0,
2166 .svhs = 2,
2167 .gpiomask = 0x0000000f,
2168 .muxsel = { 2, 1, 1 },
2169 .audiomux = { 0x02, 0x00, 0x00, 0x00, 0x00},
2170 .tuner_type = TUNER_TEMIC_PAL,
2171 .tuner_addr = ADDR_UNSET,
2172 .no_msp34xx = 1,
2173 .no_tda9875 = 1,
2174 },{
2175 /* Wolfram Joost <wojo@frokaschwei.de> */
2176 .name = "AVerMedia AVerTV DVB-T 771",
2177 .video_inputs = 2,
2178 .svhs = 1,
2179 .tuner = -1,
2180 .tuner_type = TUNER_ABSENT,
2181 .tuner_addr = ADDR_UNSET,
2182 .muxsel = { 3 , 3 },
2183 .no_msp34xx = 1,
2184 .no_tda9875 = 1,
2185 .no_tda7432 = 1,
2186 .pll = PLL_28,
2187 .has_dvb = 1,
2188 .no_gpioirq = 1,
2189 .has_remote = 1,
2190 },{
2191 /* ---- card 0x7c ---------------------------------- */
2192 /* Matt Jesson <dvb@jesson.eclipse.co.uk> */
2193 /* Based on the Nebula card data - added remote and new card number - BTTV_AVDVBT_761, see also ir-kbd-gpio.c */
2194 .name = "AverMedia AverTV DVB-T 761",
2195 .video_inputs = 2,
2196 .tuner = -1,
2197 .svhs = 1,
2198 .muxsel = { 3, 1, 2, 0}, /* Comp0, S-Video, ?, ? */
2199 .no_msp34xx = 1,
2200 .no_tda9875 = 1,
2201 .no_tda7432 = 1,
2202 .pll = PLL_28,
2203 .tuner_type = -1,
2204 .tuner_addr = ADDR_UNSET,
2205 .has_dvb = 1,
2206 .no_gpioirq = 1,
2207 .has_remote = 1,
2208 },{
2209 /* andre.schwarz@matrix-vision.de */
2210 .name = "MATRIX Vision Sigma-SQ",
2211 .video_inputs = 16,
2212 .audio_inputs = 0,
2213 .tuner = -1,
2214 .svhs = -1,
2215 .gpiomask = 0x0,
2216 .muxsel = { 2, 2, 2, 2, 2, 2, 2, 2,
2217 3, 3, 3, 3, 3, 3, 3, 3 },
2218 .muxsel_hook = sigmaSQ_muxsel,
2219 .audiomux = { 0 },
2220 .no_msp34xx = 1,
2221 .pll = PLL_28,
2222 .tuner_type = -1,
2223 .tuner_addr = ADDR_UNSET,
2224 },{
2225 /* andre.schwarz@matrix-vision.de */
2226 .name = "MATRIX Vision Sigma-SLC",
2227 .video_inputs = 4,
2228 .audio_inputs = 0,
2229 .tuner = -1,
2230 .svhs = -1,
2231 .gpiomask = 0x0,
2232 .muxsel = { 2, 2, 2, 2 },
2233 .muxsel_hook = sigmaSLC_muxsel,
2234 .audiomux = { 0 },
2235 .no_msp34xx = 1,
2236 .pll = PLL_28,
2237 .tuner_type = -1,
2238 .tuner_addr = ADDR_UNSET,
2239 },{
2240 /* BTTV_APAC_VIEWCOMP */
2241 /* Attila Kondoros <attila.kondoros@chello.hu> */
2242 /* bt878 TV + FM 0x00000000 subsystem ID */
2243 .name = "APAC Viewcomp 878(AMAX)",
2244 .video_inputs = 2,
2245 .audio_inputs = 1,
2246 .tuner = 0,
2247 .svhs = -1,
2248 .gpiomask = 0xFF,
2249 .muxsel = { 2, 3, 1, 1},
2250 .audiomux = { 2, 0, 0, 0, 10},
2251 .needs_tvaudio = 0,
2252 .pll = PLL_28,
2253 .tuner_type = TUNER_PHILIPS_PAL,
2254 .tuner_addr = ADDR_UNSET,
2255 .has_remote = 1, /* miniremote works, see ir-kbd-gpio.c */
2256 .has_radio = 1, /* not every card has radio */
2257 },{
2258
2259 /* ---- card 0x80 ---------------------------------- */
2260 /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
2261 .name = "DViCO FusionHDTV DVB-T Lite",
2262 .tuner = -1,
2263 .no_msp34xx = 1,
2264 .no_tda9875 = 1,
2265 .no_tda7432 = 1,
2266 .pll = PLL_28,
2267 .no_video = 1,
2268 .has_dvb = 1,
2269 .tuner_type = -1,
2270 .tuner_addr = ADDR_UNSET,
2271 },{
2272 /* Steven <photon38@pchome.com.tw> */
2273 .name = "V-Gear MyVCD",
2274 .video_inputs = 3,
2275 .audio_inputs = 1,
2276 .tuner = 0,
2277 .svhs = 2,
2278 .gpiomask = 0x3f,
2279 .muxsel = {2, 3, 1, 0},
2280 .audiomux = {0x31, 0x31, 0x31, 0x31, 0x31, 0x31},
2281 .no_msp34xx = 1,
2282 .pll = PLL_28,
2283 .tuner_type = TUNER_PHILIPS_NTSC_M,
2284 .tuner_addr = ADDR_UNSET,
2285 .has_radio = 0,
2286 },{
2287 /* Rick C <cryptdragoon@gmail.com> */
2288 .name = "Super TV Tuner",
2289 .video_inputs = 4,
2290 .audio_inputs = 1,
2291 .tuner = 0,
2292 .svhs = 2,
2293 .muxsel = { 2, 3, 1, 0},
2294 .tuner_type = TUNER_PHILIPS_NTSC,
2295 .tuner_addr = ADDR_UNSET,
2296 .gpiomask = 0x008007,
2297 .audiomux = { 0, 0x000001,0,0, 0},
2298 .needs_tvaudio = 1,
2299 .has_radio = 1,
2300 },{
2301 /* Chris Fanning <video4linux@haydon.net> */
2302 .name = "Tibet Systems 'Progress DVR' CS16",
2303 .video_inputs = 16,
2304 .audio_inputs = 0,
2305 .tuner = -1,
2306 .svhs = -1,
2307 .muxsel = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 },
2308 .pll = PLL_28,
2309 .no_msp34xx = 1,
2310 .no_tda9875 = 1,
2311 .no_tda7432 = 1,
2312 .tuner_type = -1,
2313 .tuner_addr = ADDR_UNSET,
2314 .muxsel_hook = tibetCS16_muxsel,
2315 },
2316 {
2317 /* Bill Brack <wbrack@mmm.com.hk> */
2318 /*
2319 * Note that, because of the card's wiring, the "master"
2320 * BT878A chip (i.e. the one which controls the analog switch
2321 * and must use this card type) is the 2nd one detected. The
2322 * other 3 chips should use card type 0x85, whose description
2323 * follows this one. There is a EEPROM on the card (which is
2324 * connected to the I2C of one of those other chips), but is
2325 * not currently handled. There is also a facility for a
2326 * "monitor", which is also not currently implemented.
2327 */
2328 .name = "Kodicom 4400R (master)",
2329 .video_inputs = 16,
2330 .audio_inputs = 0,
2331 .tuner = -1,
2332 .tuner_type = -1,
2333 .tuner_addr = ADDR_UNSET,
2334 .svhs = -1,
2335 /* GPIO bits 0-9 used for analog switch:
2336 * 00 - 03: camera selector
2337 * 04 - 06: channel (controller) selector
2338 * 07: data (1->on, 0->off)
2339 * 08: strobe
2340 * 09: reset
2341 * bit 16 is input from sync separator for the channel
2342 */
2343 .gpiomask = 0x0003ff,
2344 .no_gpioirq = 1,
2345 .muxsel = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
2346 .pll = PLL_28,
2347 .no_msp34xx = 1,
2348 .no_tda7432 = 1,
2349 .no_tda9875 = 1,
2350 .muxsel_hook = kodicom4400r_muxsel,
2351 },
2352 {
2353 /* Bill Brack <wbrack@mmm.com.hk> */
2354 /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
2355 * one which controls the analog switch, and must use the card type)
2356 * is the 2nd one detected. The other 3 chips should use this card
2357 * type
2358 */
2359 .name = "Kodicom 4400R (slave)",
2360 .video_inputs = 16,
2361 .audio_inputs = 0,
2362 .tuner = -1,
2363 .tuner_type = -1,
2364 .tuner_addr = ADDR_UNSET,
2365 .svhs = -1,
2366 .gpiomask = 0x010000,
2367 .no_gpioirq = 1,
2368 .muxsel = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
2369 .pll = PLL_28,
2370 .no_msp34xx = 1,
2371 .no_tda7432 = 1,
2372 .no_tda9875 = 1,
2373 .muxsel_hook = kodicom4400r_muxsel,
2374 },
2375 {
2376 /* ---- card 0x86---------------------------------- */
2377 /* Michael Henson <mhenson@clarityvi.com> */
2378 /* Adlink RTV24 with special unlock codes */
2379 .name = "Adlink RTV24",
2380 .video_inputs = 4,
2381 .audio_inputs = 1,
2382 .tuner = 0,
2383 .svhs = 2,
2384 .muxsel = { 2, 3, 1, 0},
2385 .tuner_type = -1,
2386 .tuner_addr = ADDR_UNSET,
2387 .pll = PLL_28,
2388 },
2389 {
2390 /* ---- card 0x87---------------------------------- */
2391 /* Michael Krufky <mkrufky@m1k.net> */
2392 .name = "DViCO FusionHDTV 5 Lite",
2393 .tuner = 0,
2394 .tuner_type = TUNER_LG_TDVS_H062F,
2395 .tuner_addr = ADDR_UNSET,
2396 .video_inputs = 3,
2397 .audio_inputs = 1,
2398 .svhs = 2,
2399 .muxsel = { 2, 3, 1 },
2400 .gpiomask = 0x00e00007,
2401 .audiomux = { 0x00400005, 0, 0x00000001, 0, 0x00c00007, 0 },
2402 .no_msp34xx = 1,
2403 .no_tda9875 = 1,
2404 .no_tda7432 = 1,
2405 },{
2406 /* ---- card 0x88---------------------------------- */
2407 /* Mauro Carvalho Chehab <mchehab@brturbo.com.br> */
2408 .name = "Acorp Y878F",
2409 .video_inputs = 3,
2410 .audio_inputs = 1,
2411 .tuner = 0,
2412 .svhs = 2,
2413 .gpiomask = 0x01fe00,
2414 .muxsel = { 2, 3, 1, 1},
2415 .audiomux = { 0x001e00, 0, 0x018000, 0x014000, 0x002000, 0 },
2416 .needs_tvaudio = 1,
2417 .pll = PLL_28,
2418 .tuner_type = TUNER_YMEC_TVF66T5_B_DFF,
2419 .tuner_addr = 0xc1 >>1,
2420 .has_radio = 1,
2421 }};
2422
2423 static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
2424
2425 /* ----------------------------------------------------------------------- */
2426
2427 static unsigned char eeprom_data[256];
2428
2429 /*
2430 * identify card
2431 */
2432 void __devinit bttv_idcard(struct bttv *btv)
2433 {
2434 unsigned int gpiobits;
2435 int i,type;
2436 unsigned short tmp;
2437
2438 /* read PCI subsystem ID */
2439 pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_ID, &tmp);
2440 btv->cardid = tmp << 16;
2441 pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_VENDOR_ID, &tmp);
2442 btv->cardid |= tmp;
2443
2444 if (0 != btv->cardid && 0xffffffff != btv->cardid) {
2445 /* look for the card */
2446 for (type = -1, i = 0; cards[i].id != 0; i++)
2447 if (cards[i].id == btv->cardid)
2448 type = i;
2449
2450 if (type != -1) {
2451 /* found it */
2452 printk(KERN_INFO "bttv%d: detected: %s [card=%d], "
2453 "PCI subsystem ID is %04x:%04x\n",
2454 btv->c.nr,cards[type].name,cards[type].cardnr,
2455 btv->cardid & 0xffff,
2456 (btv->cardid >> 16) & 0xffff);
2457 btv->c.type = cards[type].cardnr;
2458 } else {
2459 /* 404 */
2460 printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
2461 btv->c.nr, btv->cardid & 0xffff,
2462 (btv->cardid >> 16) & 0xffff);
2463 printk(KERN_DEBUG "please mail id, board name and "
2464 "the correct card= insmod option to kraxel@bytesex.org\n");
2465 }
2466 }
2467
2468 /* let the user override the autodetected type */
2469 if (card[btv->c.nr] < bttv_num_tvcards)
2470 btv->c.type=card[btv->c.nr];
2471
2472 /* print which card config we are using */
2473 printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->c.nr,
2474 bttv_tvcards[btv->c.type].name, btv->c.type,
2475 card[btv->c.nr] < bttv_num_tvcards
2476 ? "insmod option" : "autodetected");
2477
2478 /* overwrite gpio stuff ?? */
2479 if (UNSET == audioall && UNSET == audiomux[0])
2480 return;
2481
2482 if (UNSET != audiomux[0]) {
2483 gpiobits = 0;
2484 for (i = 0; i < 5; i++) {
2485 bttv_tvcards[btv->c.type].audiomux[i] = audiomux[i];
2486 gpiobits |= audiomux[i];
2487 }
2488 } else {
2489 gpiobits = audioall;
2490 for (i = 0; i < 5; i++) {
2491 bttv_tvcards[btv->c.type].audiomux[i] = audioall;
2492 }
2493 }
2494 bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
2495 printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=",
2496 btv->c.nr,bttv_tvcards[btv->c.type].gpiomask);
2497 for (i = 0; i < 5; i++) {
2498 printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->c.type].audiomux[i]);
2499 }
2500 printk("\n");
2501 }
2502
2503 /*
2504 * (most) board specific initialisations goes here
2505 */
2506
2507 /* Some Modular Technology cards have an eeprom, but no subsystem ID */
2508 void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
2509 {
2510 int type = -1;
2511
2512 if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
2513 type = BTTV_MODTEC_205;
2514 else if (0 == strncmp(eeprom_data+20,"Picolo",7))
2515 type = BTTV_EURESYS_PICOLO;
2516 else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
2517 type = BTTV_HAUPPAUGE; /* old bt848 */
2518
2519 if (-1 != type) {
2520 btv->c.type = type;
2521 printk("bttv%d: detected by eeprom: %s [card=%d]\n",
2522 btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
2523 }
2524 }
2525
2526 static void flyvideo_gpio(struct bttv *btv)
2527 {
2528 int gpio,has_remote,has_radio,is_capture_only,is_lr90,has_tda9820_tda9821;
2529 int tuner=-1,ttype;
2530
2531 gpio_inout(0xffffff, 0);
2532 udelay(8); /* without this we would see the 0x1800 mask */
2533 gpio = gpio_read();
2534 /* FIXME: must restore OUR_EN ??? */
2535
2536 /* all cards provide GPIO info, some have an additional eeprom
2537 * LR50: GPIO coding can be found lower right CP1 .. CP9
2538 * CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
2539 * GPIO14-12: n.c.
2540 * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
2541
2542 * lowest 3 bytes are remote control codes (no handshake needed)
2543 * xxxFFF: No remote control chip soldered
2544 * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
2545 * Note: Some bits are Audio_Mask !
2546 */
2547 ttype=(gpio&0x0f0000)>>16;
2548 switch(ttype) {
2549 case 0x0: tuner=2; /* NTSC, e.g. TPI8NSR11P */
2550 break;
2551 case 0x2: tuner=39;/* LG NTSC (newer TAPC series) TAPC-H701P */
2552 break;
2553 case 0x4: tuner=5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
2554 break;
2555 case 0x6: tuner=37;/* LG PAL (newer TAPC series) TAPC-G702P */
2556 break;
2557 case 0xC: tuner=3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
2558 break;
2559 default:
2560 printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr);
2561 }
2562
2563 has_remote = gpio & 0x800000;
2564 has_radio = gpio & 0x400000;
2565 /* unknown 0x200000;
2566 * unknown2 0x100000; */
2567 is_capture_only = !(gpio & 0x008000); /* GPIO15 */
2568 has_tda9820_tda9821 = !(gpio & 0x004000);
2569 is_lr90 = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
2570 /*
2571 * gpio & 0x001000 output bit for audio routing */
2572
2573 if(is_capture_only)
2574 tuner=4; /* No tuner present */
2575
2576 printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
2577 btv->c.nr, has_radio? "yes":"no ", has_remote? "yes":"no ", tuner, gpio);
2578 printk(KERN_INFO "bttv%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n",
2579 btv->c.nr, is_lr90?"yes":"no ", has_tda9820_tda9821?"yes":"no ",
2580 is_capture_only?"yes":"no ");
2581
2582 if(tuner!= -1) /* only set if known tuner autodetected, else let insmod option through */
2583 btv->tuner_type = tuner;
2584 btv->has_radio = has_radio;
2585
2586 /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
2587 * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
2588 * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
2589 if(has_tda9820_tda9821) btv->audio_hook = lt9415_audio;
2590 /* todo: if(has_tda9874) btv->audio_hook = fv2000s_audio; */
2591 }
2592
2593 static int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1,
2594 14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 };
2595 static int miro_fmtuner[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1,
2596 1,1,1,1, 1,1,1,0, 0,0,0,0, 0,1,0,0 };
2597
2598 static void miro_pinnacle_gpio(struct bttv *btv)
2599 {
2600 int id,msp,gpio;
2601 char *info;
2602
2603 gpio_inout(0xffffff, 0);
2604 gpio = gpio_read();
2605 id = ((gpio>>10) & 63) -1;
2606 msp = bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx");
2607 if (id < 32) {
2608 btv->tuner_type = miro_tunermap[id];
2609 if (0 == (gpio & 0x20)) {
2610 btv->has_radio = 1;
2611 if (!miro_fmtuner[id]) {
2612 btv->has_matchbox = 1;
2613 btv->mbox_we = (1<<6);
2614 btv->mbox_most = (1<<7);
2615 btv->mbox_clk = (1<<8);
2616 btv->mbox_data = (1<<9);
2617 btv->mbox_mask = (1<<6)|(1<<7)|(1<<8)|(1<<9);
2618 }
2619 } else {
2620 btv->has_radio = 0;
2621 }
2622 if (-1 != msp) {
2623 if (btv->c.type == BTTV_MIRO)
2624 btv->c.type = BTTV_MIROPRO;
2625 if (btv->c.type == BTTV_PINNACLE)
2626 btv->c.type = BTTV_PINNACLEPRO;
2627 }
2628 printk(KERN_INFO
2629 "bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
2630 btv->c.nr, id+1, btv->tuner_type,
2631 !btv->has_radio ? "no" :
2632 (btv->has_matchbox ? "matchbox" : "fmtuner"),
2633 (-1 == msp) ? "no" : "yes");
2634 } else {
2635 /* new cards with microtune tuner */
2636 id = 63 - id;
2637 btv->has_radio = 0;
2638 switch (id) {
2639 case 1:
2640 info = "PAL / mono";
2641 break;
2642 case 2:
2643 info = "PAL+SECAM / stereo";
2644 btv->has_radio = 1;
2645 break;
2646 case 3:
2647 info = "NTSC / stereo";
2648 btv->has_radio = 1;
2649 break;
2650 case 4:
2651 info = "PAL+SECAM / mono";
2652 break;
2653 case 5:
2654 info = "NTSC / mono";
2655 break;
2656 case 6:
2657 info = "NTSC / stereo";
2658 break;
2659 case 7:
2660 info = "PAL / stereo";
2661 break;
2662 default:
2663 info = "oops: unknown card";
2664 break;
2665 }
2666 if (-1 != msp)
2667 btv->c.type = BTTV_PINNACLEPRO;
2668 printk(KERN_INFO
2669 "bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
2670 btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
2671 btv->tuner_type = 33;
2672 btv->pinnacle_id = id;
2673 }
2674 }
2675
2676 /* GPIO21 L: Buffer aktiv, H: Buffer inaktiv */
2677 #define LM1882_SYNC_DRIVE 0x200000L
2678
2679 static void init_ids_eagle(struct bttv *btv)
2680 {
2681 gpio_inout(0xffffff,0xFFFF37);
2682 gpio_write(0x200020);
2683
2684 /* flash strobe inverter ?! */
2685 gpio_write(0x200024);
2686
2687 /* switch sync drive off */
2688 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
2689
2690 /* set BT848 muxel to 2 */
2691 btaor((2)<<5, ~(2<<5), BT848_IFORM);
2692 }
2693
2694 /* Muxsel helper for the IDS Eagle.
2695 * the eagles does not use the standard muxsel-bits but
2696 * has its own multiplexer */
2697 static void eagle_muxsel(struct bttv *btv, unsigned int input)
2698 {
2699 btaor((2)<<5, ~(3<<5), BT848_IFORM);
2700 gpio_bits(3,bttv_tvcards[btv->c.type].muxsel[input&7]);
2701
2702 /* composite */
2703 /* set chroma ADC to sleep */
2704 btor(BT848_ADC_C_SLEEP, BT848_ADC);
2705 /* set to composite video */
2706 btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
2707 btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
2708
2709 /* switch sync drive off */
2710 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
2711 }
2712
2713 static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
2714 {
2715 static const int masks[] = {0x30, 0x01, 0x12, 0x23};
2716 gpio_write(masks[input%4]);
2717 }
2718
2719 /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
2720 alarms output
2721
2722 GPIObit | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
2723 assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1| | |
2724
2725 IN - sensor inputs, INx - sensor inputs and TI XORed together
2726 O1,O2,O3 - alarm outputs (relays)
2727
2728 OUT ENABLE 1 1 0 . 1 1 0 0 . 0 0 0 0 = 0x6C0
2729
2730 */
2731
2732 static void init_lmlbt4x(struct bttv *btv)
2733 {
2734 printk(KERN_DEBUG "LMLBT4x init\n");
2735 btwrite(0x000000, BT848_GPIO_REG_INP);
2736 gpio_inout(0xffffff, 0x0006C0);
2737 gpio_write(0x000000);
2738 }
2739
2740 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
2741 {
2742 unsigned int inmux = input % 8;
2743 gpio_inout( 0xf, 0xf );
2744 gpio_bits( 0xf, inmux );
2745 }
2746
2747 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
2748 {
2749 unsigned int inmux = input % 4;
2750 gpio_inout( 3<<9, 3<<9 );
2751 gpio_bits( 3<<9, inmux<<9 );
2752 }
2753
2754 /* ----------------------------------------------------------------------- */
2755
2756 static void bttv_reset_audio(struct bttv *btv)
2757 {
2758 /*
2759 * BT878A has a audio-reset register.
2760 * 1. This register is an audio reset function but it is in
2761 * function-0 (video capture) address space.
2762 * 2. It is enough to do this once per power-up of the card.
2763 * 3. There is a typo in the Conexant doc -- it is not at
2764 * 0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
2765 * --//Shrikumar 030609
2766 */
2767 if (btv->id != 878)
2768 return;
2769
2770 if (bttv_debug)
2771 printk("bttv%d: BT878A ARESET\n",btv->c.nr);
2772 btwrite((1<<7), 0x058);
2773 udelay(10);
2774 btwrite( 0, 0x058);
2775 }
2776
2777 /* initialization part one -- before registering i2c bus */
2778 void __devinit bttv_init_card1(struct bttv *btv)
2779 {
2780 switch (btv->c.type) {
2781 case BTTV_HAUPPAUGE:
2782 case BTTV_HAUPPAUGE878:
2783 boot_msp34xx(btv,5);
2784 break;
2785 case BTTV_VOODOOTV_FM:
2786 boot_msp34xx(btv,20);
2787 break;
2788 case BTTV_AVERMEDIA98:
2789 boot_msp34xx(btv,11);
2790 break;
2791 case BTTV_HAUPPAUGEPVR:
2792 pvr_boot(btv);
2793 break;
2794 case BTTV_TWINHAN_DST:
2795 case BTTV_AVDVBT_771:
2796 btv->use_i2c_hw = 1;
2797 break;
2798 case BTTV_ADLINK_RTV24:
2799 init_RTV24( btv );
2800 break;
2801
2802 }
2803 if (!bttv_tvcards[btv->c.type].has_dvb)
2804 bttv_reset_audio(btv);
2805 }
2806
2807 /* initialization part two -- after registering i2c bus */
2808 void __devinit bttv_init_card2(struct bttv *btv)
2809 {
2810 int tda9887;
2811 int addr=ADDR_UNSET;
2812
2813 btv->tuner_type = -1;
2814
2815 if (BTTV_UNKNOWN == btv->c.type) {
2816 bttv_readee(btv,eeprom_data,0xa0);
2817 identify_by_eeprom(btv,eeprom_data);
2818 }
2819
2820 switch (btv->c.type) {
2821 case BTTV_MIRO:
2822 case BTTV_MIROPRO:
2823 case BTTV_PINNACLE:
2824 case BTTV_PINNACLEPRO:
2825 /* miro/pinnacle */
2826 miro_pinnacle_gpio(btv);
2827 break;
2828 case BTTV_FLYVIDEO_98:
2829 case BTTV_MAXI:
2830 case BTTV_LIFE_FLYKIT:
2831 case BTTV_FLYVIDEO:
2832 case BTTV_TYPHOON_TVIEW:
2833 case BTTV_CHRONOS_VS2:
2834 case BTTV_FLYVIDEO_98FM:
2835 case BTTV_FLYVIDEO2000:
2836 case BTTV_FLYVIDEO98EZ:
2837 case BTTV_CONFERENCETV:
2838 case BTTV_LIFETEC_9415:
2839 flyvideo_gpio(btv);
2840 break;
2841 case BTTV_HAUPPAUGE:
2842 case BTTV_HAUPPAUGE878:
2843 case BTTV_HAUPPAUGEPVR:
2844 /* pick up some config infos from the eeprom */
2845 bttv_readee(btv,eeprom_data,0xa0);
2846 hauppauge_eeprom(btv);
2847 break;
2848 case BTTV_AVERMEDIA98:
2849 case BTTV_AVPHONE98:
2850 bttv_readee(btv,eeprom_data,0xa0);
2851 avermedia_eeprom(btv);
2852 break;
2853 case BTTV_PXC200:
2854 init_PXC200(btv);
2855 break;
2856 case BTTV_PICOLO_TETRA_CHIP:
2857 picolo_tetra_init(btv);
2858 break;
2859 case BTTV_VHX:
2860 btv->has_radio = 1;
2861 btv->has_matchbox = 1;
2862 btv->mbox_we = 0x20;
2863 btv->mbox_most = 0;
2864 btv->mbox_clk = 0x08;
2865 btv->mbox_data = 0x10;
2866 btv->mbox_mask = 0x38;
2867 break;
2868 case BTTV_VOBIS_BOOSTAR:
2869 case BTTV_TERRATV:
2870 terratec_active_radio_upgrade(btv);
2871 break;
2872 case BTTV_MAGICTVIEW061:
2873 if (btv->cardid == 0x3002144f) {
2874 btv->has_radio=1;
2875 printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->c.nr);
2876 }
2877 break;
2878 case BTTV_STB2:
2879 if (btv->cardid == 0x3060121a) {
2880 /* Fix up entry for 3DFX VoodooTV 100,
2881 which is an OEM STB card variant. */
2882 btv->has_radio=0;
2883 btv->tuner_type=TUNER_TEMIC_NTSC;
2884 }
2885 break;
2886 case BTTV_OSPREY1x0:
2887 case BTTV_OSPREY1x0_848:
2888 case BTTV_OSPREY101_848:
2889 case BTTV_OSPREY1x1:
2890 case BTTV_OSPREY1x1_SVID:
2891 case BTTV_OSPREY2xx:
2892 case BTTV_OSPREY2x0_SVID:
2893 case BTTV_OSPREY2x0:
2894 case BTTV_OSPREY500:
2895 case BTTV_OSPREY540:
2896 case BTTV_OSPREY2000:
2897 bttv_readee(btv,eeprom_data,0xa0);
2898 osprey_eeprom(btv);
2899 break;
2900 case BTTV_IDS_EAGLE:
2901 init_ids_eagle(btv);
2902 break;
2903 case BTTV_MODTEC_205:
2904 bttv_readee(btv,eeprom_data,0xa0);
2905 modtec_eeprom(btv);
2906 break;
2907 case BTTV_LMLBT4:
2908 init_lmlbt4x(btv);
2909 break;
2910 case BTTV_TIBET_CS16:
2911 tibetCS16_init(btv);
2912 break;
2913 case BTTV_KODICOM_4400R:
2914 kodicom4400r_init(btv);
2915 break;
2916 }
2917
2918 /* pll configuration */
2919 if (!(btv->id==848 && btv->revision==0x11)) {
2920 /* defaults from card list */
2921 if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
2922 btv->pll.pll_ifreq=28636363;
2923 btv->pll.pll_crystal=BT848_IFORM_XT0;
2924 }
2925 if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
2926 btv->pll.pll_ifreq=35468950;
2927 btv->pll.pll_crystal=BT848_IFORM_XT1;
2928 }
2929 /* insmod options can override */
2930 switch (pll[btv->c.nr]) {
2931 case 0: /* none */
2932 btv->pll.pll_crystal = 0;
2933 btv->pll.pll_ifreq = 0;
2934 btv->pll.pll_ofreq = 0;
2935 break;
2936 case 1: /* 28 MHz */
2937 case 28:
2938 btv->pll.pll_ifreq = 28636363;
2939 btv->pll.pll_ofreq = 0;
2940 btv->pll.pll_crystal = BT848_IFORM_XT0;
2941 break;
2942 case 2: /* 35 MHz */
2943 case 35:
2944 btv->pll.pll_ifreq = 35468950;
2945 btv->pll.pll_ofreq = 0;
2946 btv->pll.pll_crystal = BT848_IFORM_XT1;
2947 break;
2948 }
2949 }
2950 btv->pll.pll_current = -1;
2951
2952 /* tuner configuration (from card list / autodetect / insmod option) */
2953 if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
2954 addr = bttv_tvcards[btv->c.type].tuner_addr;
2955
2956 if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
2957 if(UNSET == btv->tuner_type)
2958 btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
2959 if (UNSET != tuner[btv->c.nr])
2960 btv->tuner_type = tuner[btv->c.nr];
2961 printk("bttv%d: using tuner=%d\n",btv->c.nr,btv->tuner_type);
2962 if (btv->pinnacle_id != UNSET)
2963 bttv_call_i2c_clients(btv, AUDC_CONFIG_PINNACLE,
2964 &btv->pinnacle_id);
2965 if (btv->tuner_type != UNSET) {
2966 struct tuner_setup tun_setup;
2967
2968 tun_setup.mode_mask = T_RADIO | T_ANALOG_TV | T_DIGITAL_TV;
2969 tun_setup.type = btv->tuner_type;
2970 tun_setup.addr = addr;
2971
2972 bttv_call_i2c_clients(btv, TUNER_SET_TYPE_ADDR, &tun_setup);
2973 }
2974
2975 btv->svhs = bttv_tvcards[btv->c.type].svhs;
2976 if (svhs[btv->c.nr] != UNSET)
2977 btv->svhs = svhs[btv->c.nr];
2978 if (remote[btv->c.nr] != UNSET)
2979 btv->has_remote = remote[btv->c.nr];
2980
2981 if (bttv_tvcards[btv->c.type].has_radio)
2982 btv->has_radio=1;
2983 if (bttv_tvcards[btv->c.type].has_remote)
2984 btv->has_remote=1;
2985 if (bttv_tvcards[btv->c.type].no_gpioirq)
2986 btv->gpioirq=0;
2987 if (bttv_tvcards[btv->c.type].audio_hook)
2988 btv->audio_hook=bttv_tvcards[btv->c.type].audio_hook;
2989
2990 if (bttv_tvcards[btv->c.type].digital_mode == DIGITAL_MODE_CAMERA) {
2991 /* detect Bt832 chip for quartzsight digital camera */
2992 if ((bttv_I2CRead(btv, I2C_BT832_ALT1, "Bt832") >=0) ||
2993 (bttv_I2CRead(btv, I2C_BT832_ALT2, "Bt832") >=0))
2994 boot_bt832(btv);
2995 }
2996
2997 if (!autoload)
2998 return;
2999
3000 /* try to detect audio/fader chips */
3001 if (!bttv_tvcards[btv->c.type].no_msp34xx &&
3002 bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx") >=0)
3003 request_module("msp3400");
3004
3005 if (bttv_tvcards[btv->c.type].msp34xx_alt &&
3006 bttv_I2CRead(btv, I2C_MSP3400_ALT, "MSP34xx (alternate address)") >=0)
3007 request_module("msp3400");
3008
3009 if (!bttv_tvcards[btv->c.type].no_tda9875 &&
3010 bttv_I2CRead(btv, I2C_TDA9875, "TDA9875") >=0)
3011 request_module("tda9875");
3012
3013 if (!bttv_tvcards[btv->c.type].no_tda7432 &&
3014 bttv_I2CRead(btv, I2C_TDA7432, "TDA7432") >=0)
3015 request_module("tda7432");
3016
3017 if (bttv_tvcards[btv->c.type].needs_tvaudio)
3018 request_module("tvaudio");
3019
3020 /* tuner modules */
3021 tda9887 = 0;
3022 if (btv->pinnacle_id != UNSET)
3023 tda9887 = 1;
3024 if (0 == tda9887 && 0 == bttv_tvcards[btv->c.type].has_dvb &&
3025 bttv_I2CRead(btv, I2C_TDA9887, "TDA9887") >=0)
3026 tda9887 = 1;
3027 if((btv->tuner_type == TUNER_PHILIPS_FM1216ME_MK3) ||
3028 (btv->tuner_type == TUNER_PHILIPS_FM1236_MK3) ||
3029 (btv->tuner_type == TUNER_PHILIPS_FM1256_IH3) ||
3030 tda9887)
3031 request_module("tda9887");
3032 if (btv->tuner_type != UNSET)
3033 request_module("tuner");
3034 }
3035
3036
3037 /* ----------------------------------------------------------------------- */
3038
3039 static void modtec_eeprom(struct bttv *btv)
3040 {
3041 if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
3042 btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
3043 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3044 btv->c.nr,&eeprom_data[0x1e]);
3045 } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
3046 btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
3047 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3048 btv->c.nr,&eeprom_data[0x1e]);
3049 } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
3050 btv->tuner_type=TUNER_PHILIPS_NTSC;
3051 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3052 btv->c.nr,&eeprom_data[0x1e]);
3053 } else {
3054 printk("bttv%d: Modtec: Unknown TunerString: %s\n",
3055 btv->c.nr,&eeprom_data[0x1e]);
3056 }
3057 }
3058
3059 static void __devinit hauppauge_eeprom(struct bttv *btv)
3060 {
3061 struct tveeprom tv;
3062
3063 tveeprom_hauppauge_analog(&btv->i2c_client, &tv, eeprom_data);
3064 btv->tuner_type = tv.tuner_type;
3065 btv->has_radio = tv.has_radio;
3066 }
3067
3068 static int terratec_active_radio_upgrade(struct bttv *btv)
3069 {
3070 int freq;
3071
3072 btv->has_radio = 1;
3073 btv->has_matchbox = 1;
3074 btv->mbox_we = 0x10;
3075 btv->mbox_most = 0x20;
3076 btv->mbox_clk = 0x08;
3077 btv->mbox_data = 0x04;
3078 btv->mbox_mask = 0x3c;
3079
3080 btv->mbox_iow = 1 << 8;
3081 btv->mbox_ior = 1 << 9;
3082 btv->mbox_csel = 1 << 10;
3083
3084 freq=88000/62.5;
3085 tea5757_write(btv, 5 * freq + 0x358); /* write 0x1ed8 */
3086 if (0x1ed8 == tea5757_read(btv)) {
3087 printk("bttv%d: Terratec Active Radio Upgrade found.\n",
3088 btv->c.nr);
3089 btv->has_radio = 1;
3090 btv->has_matchbox = 1;
3091 } else {
3092 btv->has_radio = 0;
3093 btv->has_matchbox = 0;
3094 }
3095 return 0;
3096 }
3097
3098
3099 /* ----------------------------------------------------------------------- */
3100
3101 /*
3102 * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
3103 *
3104 * The hcwamc.rbf firmware file is on the Hauppauge driver CD. Have
3105 * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
3106 * unpacked with unzip).
3107 */
3108 #define PVR_GPIO_DELAY 10
3109
3110 #define BTTV_ALT_DATA 0x000001
3111 #define BTTV_ALT_DCLK 0x100000
3112 #define BTTV_ALT_NCONFIG 0x800000
3113
3114 static int __devinit pvr_altera_load(struct bttv *btv, u8 *micro, u32 microlen)
3115 {
3116 u32 n;
3117 u8 bits;
3118 int i;
3119
3120 gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
3121 gpio_write(0);
3122 udelay(PVR_GPIO_DELAY);
3123
3124 gpio_write(BTTV_ALT_NCONFIG);
3125 udelay(PVR_GPIO_DELAY);
3126
3127 for (n = 0; n < microlen; n++) {
3128 bits = micro[n];
3129 for ( i = 0 ; i < 8 ; i++ ) {
3130 gpio_bits(BTTV_ALT_DCLK,0);
3131 if (bits & 0x01)
3132 gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
3133 else
3134 gpio_bits(BTTV_ALT_DATA,0);
3135 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3136 bits >>= 1;
3137 }
3138 }
3139 gpio_bits(BTTV_ALT_DCLK,0);
3140 udelay(PVR_GPIO_DELAY);
3141
3142 /* begin Altera init loop (Not necessary,but doesn't hurt) */
3143 for (i = 0 ; i < 30 ; i++) {
3144 gpio_bits(BTTV_ALT_DCLK,0);
3145 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3146 }
3147 gpio_bits(BTTV_ALT_DCLK,0);
3148 return 0;
3149 }
3150
3151 static int __devinit pvr_boot(struct bttv *btv)
3152 {
3153 const struct firmware *fw_entry;
3154 int rc;
3155
3156 rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
3157 if (rc != 0) {
3158 printk(KERN_WARNING "bttv%d: no altera firmware [via hotplug]\n",
3159 btv->c.nr);
3160 return rc;
3161 }
3162 rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
3163 printk(KERN_INFO "bttv%d: altera firmware upload %s\n",
3164 btv->c.nr, (rc < 0) ? "failed" : "ok");
3165 release_firmware(fw_entry);
3166 return rc;
3167 }
3168
3169 /* ----------------------------------------------------------------------- */
3170 /* some osprey specific stuff */
3171
3172 static void __devinit osprey_eeprom(struct bttv *btv)
3173 {
3174 int i = 0;
3175 unsigned char *ee = eeprom_data;
3176 unsigned long serial = 0;
3177
3178 if (btv->c.type == 0) {
3179 /* this might be an antique... check for MMAC label in eeprom */
3180 if ((ee[0]=='M') && (ee[1]=='M') && (ee[2]=='A') && (ee[3]=='C')) {
3181 unsigned char checksum = 0;
3182 for (i =0; i<21; i++)
3183 checksum += ee[i];
3184 if (checksum != ee[21])
3185 return;
3186 btv->c.type = BTTV_OSPREY1x0_848;
3187 for (i = 12; i < 21; i++)
3188 serial *= 10, serial += ee[i] - '0';
3189 }
3190 } else {
3191 unsigned short type;
3192 int offset = 4*16;
3193
3194 for(; offset < 8*16; offset += 16) {
3195 unsigned short checksum = 0;
3196 /* verify the checksum */
3197 for(i = 0; i<14; i++) checksum += ee[i+offset];
3198 checksum = ~checksum; /* no idea why */
3199 if ((((checksum>>8)&0x0FF) == ee[offset+14]) &&
3200 ((checksum & 0x0FF) == ee[offset+15])) {
3201 break;
3202 }
3203 }
3204
3205 if (offset >= 8*16)
3206 return;
3207
3208 /* found a valid descriptor */
3209 type = (ee[offset+4]<<8) | (ee[offset+5]);
3210
3211 switch(type) {
3212
3213 /* 848 based */
3214 case 0x0004:
3215 btv->c.type = BTTV_OSPREY1x0_848;
3216 break;
3217 case 0x0005:
3218 btv->c.type = BTTV_OSPREY101_848;
3219 break;
3220
3221 /* 878 based */
3222 case 0x0012:
3223 case 0x0013:
3224 btv->c.type = BTTV_OSPREY1x0;
3225 break;
3226 case 0x0014:
3227 case 0x0015:
3228 btv->c.type = BTTV_OSPREY1x1;
3229 break;
3230 case 0x0016:
3231 case 0x0017:
3232 case 0x0020:
3233 btv->c.type = BTTV_OSPREY1x1_SVID;
3234 break;
3235 case 0x0018:
3236 case 0x0019:
3237 case 0x001E:
3238 case 0x001F:
3239 btv->c.type = BTTV_OSPREY2xx;
3240 break;
3241 case 0x001A:
3242 case 0x001B:
3243 btv->c.type = BTTV_OSPREY2x0_SVID;
3244 break;
3245 case 0x0040:
3246 btv->c.type = BTTV_OSPREY500;
3247 break;
3248 case 0x0050:
3249 case 0x0056:
3250 btv->c.type = BTTV_OSPREY540;
3251 /* bttv_osprey_540_init(btv); */
3252 break;
3253 case 0x0060:
3254 case 0x0070:
3255 btv->c.type = BTTV_OSPREY2x0;
3256 /* enable output on select control lines */
3257 gpio_inout(0xffffff,0x000303);
3258 break;
3259 default:
3260 /* unknown...leave generic, but get serial # */
3261 break;
3262 }
3263 serial = (ee[offset+6] << 24)
3264 | (ee[offset+7] << 16)
3265 | (ee[offset+8] << 8)
3266 | (ee[offset+9]);
3267 }
3268
3269 printk(KERN_INFO "bttv%d: osprey eeprom: card=%d name=%s serial=%ld\n",
3270 btv->c.nr, btv->c.type, bttv_tvcards[btv->c.type].name,serial);
3271 }
3272
3273 /* ----------------------------------------------------------------------- */
3274 /* AVermedia specific stuff, from bktr_card.c */
3275
3276 static int tuner_0_table[] = {
3277 TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL /* PAL-BG*/,
3278 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL /* PAL-I*/,
3279 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL,
3280 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
3281 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
3282 TUNER_PHILIPS_FM1216ME_MK3 };
3283
3284 static int tuner_1_table[] = {
3285 TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL,
3286 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
3287 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
3288 TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */
3289 TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
3290
3291 static void __devinit avermedia_eeprom(struct bttv *btv)
3292 {
3293 int tuner_make,tuner_tv_fm,tuner_format,tuner=0;
3294
3295 tuner_make = (eeprom_data[0x41] & 0x7);
3296 tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3;
3297 tuner_format = (eeprom_data[0x42] & 0xf0) >> 4;
3298 btv->has_remote = (eeprom_data[0x42] & 0x01);
3299
3300 if (tuner_make == 0 || tuner_make == 2)
3301 if(tuner_format <=0x0a)
3302 tuner = tuner_0_table[tuner_format];
3303 if (tuner_make == 1)
3304 if(tuner_format <=9)
3305 tuner = tuner_1_table[tuner_format];
3306
3307 if (tuner_make == 4)
3308 if(tuner_format == 0x09)
3309 tuner = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
3310
3311 printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
3312 btv->c.nr,eeprom_data[0x41],eeprom_data[0x42]);
3313 if(tuner) {
3314 btv->tuner_type=tuner;
3315 printk("%d",tuner);
3316 } else
3317 printk("Unknown type");
3318 printk(" radio:%s remote control:%s\n",
3319 tuner_tv_fm ? "yes" : "no",
3320 btv->has_remote ? "yes" : "no");
3321 }
3322
3323 /* used on Voodoo TV/FM (Voodoo 200), S0 wired to 0x10000 */
3324 void bttv_tda9880_setnorm(struct bttv *btv, int norm)
3325 {
3326 /* fix up our card entry */
3327 if(norm==VIDEO_MODE_NTSC) {
3328 bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[0]=0x957fff;
3329 bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[4]=0x957fff;
3330 dprintk("bttv_tda9880_setnorm to NTSC\n");
3331 }
3332 else {
3333 bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[0]=0x947fff;
3334 bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[4]=0x947fff;
3335 dprintk("bttv_tda9880_setnorm to PAL\n");
3336 }
3337 /* set GPIO according */
3338 gpio_bits(bttv_tvcards[btv->c.type].gpiomask,
3339 bttv_tvcards[btv->c.type].audiomux[btv->audio]);
3340 }
3341
3342
3343 /*
3344 * reset/enable the MSP on some Hauppauge cards
3345 * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
3346 *
3347 * Hauppauge: pin 5
3348 * Voodoo: pin 20
3349 */
3350 static void __devinit boot_msp34xx(struct bttv *btv, int pin)
3351 {
3352 int mask = (1 << pin);
3353
3354 gpio_inout(mask,mask);
3355 gpio_bits(mask,0);
3356 udelay(2500);
3357 gpio_bits(mask,mask);
3358
3359 if (bttv_gpio)
3360 bttv_gpio_tracking(btv,"msp34xx");
3361 if (bttv_verbose)
3362 printk(KERN_INFO "bttv%d: Hauppauge/Voodoo msp34xx: reset line "
3363 "init [%d]\n", btv->c.nr, pin);
3364 }
3365
3366 static void __devinit boot_bt832(struct bttv *btv)
3367 {
3368 }
3369
3370 /* ----------------------------------------------------------------------- */
3371 /* Imagenation L-Model PXC200 Framegrabber */
3372 /* This is basically the same procedure as
3373 * used by Alessandro Rubini in his pxc200
3374 * driver, but using BTTV functions */
3375
3376 static void __devinit init_PXC200(struct bttv *btv)
3377 {
3378 static int vals[] __devinitdata = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d,
3379 0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
3380 0x00 };
3381 unsigned int i;
3382 int tmp;
3383 u32 val;
3384
3385 /* Initialise GPIO-connevted stuff */
3386 gpio_inout(0xffffff, (1<<13));
3387 gpio_write(0);
3388 udelay(3);
3389 gpio_write(1<<13);
3390 /* GPIO inputs are pulled up, so no need to drive
3391 * reset pin any longer */
3392 gpio_bits(0xffffff, 0);
3393 if (bttv_gpio)
3394 bttv_gpio_tracking(btv,"pxc200");
3395
3396 /* we could/should try and reset/control the AD pots? but
3397 right now we simply turned off the crushing. Without
3398 this the AGC drifts drifts
3399 remember the EN is reverse logic -->
3400 setting BT848_ADC_AGC_EN disable the AGC
3401 tboult@eecs.lehigh.edu
3402 */
3403
3404 btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
3405
3406 /* Initialise MAX517 DAC */
3407 printk(KERN_INFO "Setting DAC reference voltage level ...\n");
3408 bttv_I2CWrite(btv,0x5E,0,0x80,1);
3409
3410 /* Initialise 12C508 PIC */
3411 /* The I2CWrite and I2CRead commmands are actually to the
3412 * same chips - but the R/W bit is included in the address
3413 * argument so the numbers are different */
3414
3415
3416 printk(KERN_INFO "Initialising 12C508 PIC chip ...\n");
3417
3418 /* First of all, enable the clock line. This is used in the PXC200-F */
3419 val = btread(BT848_GPIO_DMA_CTL);
3420 val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
3421 btwrite(val, BT848_GPIO_DMA_CTL);
3422
3423 /* Then, push to 0 the reset pin long enough to reset the *
3424 * device same as above for the reset line, but not the same
3425 * value sent to the GPIO-connected stuff
3426 * which one is the good one? */
3427 gpio_inout(0xffffff,(1<<2));
3428 gpio_write(0);
3429 udelay(10);
3430 gpio_write(1<<2);
3431
3432 for (i = 0; i < ARRAY_SIZE(vals); i++) {
3433 tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
3434 if (tmp != -1) {
3435 printk(KERN_INFO
3436 "I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
3437 vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
3438 }
3439 }
3440
3441 printk(KERN_INFO "PXC200 Initialised.\n");
3442 }
3443
3444
3445
3446 /* ----------------------------------------------------------------------- */
3447 /*
3448 * The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
3449 * it. This apparently involves the following procedure for each 878 chip:
3450 *
3451 * 1) write 0x00C3FEFF to the GPIO_OUT_EN register
3452 *
3453 * 2) write to GPIO_DATA
3454 * - 0x0E
3455 * - sleep 1ms
3456 * - 0x10 + 0x0E
3457 * - sleep 10ms
3458 * - 0x0E
3459 * read from GPIO_DATA into buf (uint_32)
3460 * - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
3461 * error. ERROR_CPLD_Check_Failed stop.
3462 *
3463 * 3) write to GPIO_DATA
3464 * - write 0x4400 + 0x0E
3465 * - sleep 10ms
3466 * - write 0x4410 + 0x0E
3467 * - sleep 1ms
3468 * - write 0x0E
3469 * read from GPIO_DATA into buf (uint_32)
3470 * - if ( buf>>18 & 0x01 ) || ( buf>>19 && 0x01 != 0 )
3471 * error. ERROR_CPLD_Check_Failed.
3472 */
3473 /* ----------------------------------------------------------------------- */
3474 void
3475 init_RTV24 (struct bttv *btv)
3476 {
3477 uint32_t dataRead = 0;
3478 long watchdog_value = 0x0E;
3479
3480 printk (KERN_INFO
3481 "bttv%d: Adlink RTV-24 initialisation in progress ...\n",
3482 btv->c.nr);
3483
3484 btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
3485
3486 btwrite (0 + watchdog_value, BT848_GPIO_DATA);
3487 msleep (1);
3488 btwrite (0x10 + watchdog_value, BT848_GPIO_DATA);
3489 msleep (10);
3490 btwrite (0 + watchdog_value, BT848_GPIO_DATA);
3491
3492 dataRead = btread (BT848_GPIO_DATA);
3493
3494 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
3495 printk (KERN_INFO
3496 "bttv%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
3497 btv->c.nr, dataRead);
3498 }
3499
3500 btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA);
3501 msleep (10);
3502 btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA);
3503 msleep (1);
3504 btwrite (watchdog_value, BT848_GPIO_DATA);
3505 msleep (1);
3506 dataRead = btread (BT848_GPIO_DATA);
3507
3508 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
3509 printk (KERN_INFO
3510 "bttv%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
3511 btv->c.nr, dataRead);
3512
3513 return;
3514 }
3515
3516 printk (KERN_INFO
3517 "bttv%d: Adlink RTV-24 initialisation complete.\n", btv->c.nr);
3518 }
3519
3520
3521
3522 /* ----------------------------------------------------------------------- */
3523 /* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */
3524 /*
3525 * Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
3526 * This code is placed under the terms of the GNU General Public License
3527 *
3528 * Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
3529 */
3530
3531 static void bus_low(struct bttv *btv, int bit)
3532 {
3533 if (btv->mbox_ior) {
3534 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
3535 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
3536 udelay(5);
3537 }
3538
3539 gpio_bits(bit,0);
3540 udelay(5);
3541
3542 if (btv->mbox_ior) {
3543 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
3544 udelay(5);
3545 }
3546 }
3547
3548 static void bus_high(struct bttv *btv, int bit)
3549 {
3550 if (btv->mbox_ior) {
3551 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
3552 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
3553 udelay(5);
3554 }
3555
3556 gpio_bits(bit,bit);
3557 udelay(5);
3558
3559 if (btv->mbox_ior) {
3560 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
3561 udelay(5);
3562 }
3563 }
3564
3565 static int bus_in(struct bttv *btv, int bit)
3566 {
3567 if (btv->mbox_ior) {
3568 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
3569 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
3570 udelay(5);
3571
3572 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
3573 udelay(5);
3574 }
3575 return gpio_read() & (bit);
3576 }
3577
3578 /* TEA5757 register bits */
3579 #define TEA_FREQ 0:14
3580 #define TEA_BUFFER 15:15
3581
3582 #define TEA_SIGNAL_STRENGTH 16:17
3583
3584 #define TEA_PORT1 18:18
3585 #define TEA_PORT0 19:19
3586
3587 #define TEA_BAND 20:21
3588 #define TEA_BAND_FM 0
3589 #define TEA_BAND_MW 1
3590 #define TEA_BAND_LW 2
3591 #define TEA_BAND_SW 3
3592
3593 #define TEA_MONO 22:22
3594 #define TEA_ALLOW_STEREO 0
3595 #define TEA_FORCE_MONO 1
3596
3597 #define TEA_SEARCH_DIRECTION 23:23
3598 #define TEA_SEARCH_DOWN 0
3599 #define TEA_SEARCH_UP 1
3600
3601 #define TEA_STATUS 24:24
3602 #define TEA_STATUS_TUNED 0
3603 #define TEA_STATUS_SEARCHING 1
3604
3605 /* Low-level stuff */
3606 static int tea5757_read(struct bttv *btv)
3607 {
3608 unsigned long timeout;
3609 int value = 0;
3610 int i;
3611
3612 /* better safe than sorry */
3613 gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we);
3614
3615 if (btv->mbox_ior) {
3616 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
3617 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
3618 udelay(5);
3619 }
3620
3621 if (bttv_gpio)
3622 bttv_gpio_tracking(btv,"tea5757 read");
3623
3624 bus_low(btv,btv->mbox_we);
3625 bus_low(btv,btv->mbox_clk);
3626
3627 udelay(10);
3628 timeout= jiffies + HZ;
3629
3630 /* wait for DATA line to go low; error if it doesn't */
3631 while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout))
3632 schedule();
3633 if (bus_in(btv,btv->mbox_data)) {
3634 printk(KERN_WARNING "bttv%d: tea5757: read timeout\n",btv->c.nr);
3635 return -1;
3636 }
3637
3638 dprintk("bttv%d: tea5757:",btv->c.nr);
3639 for(i = 0; i < 24; i++)
3640 {
3641 udelay(5);
3642 bus_high(btv,btv->mbox_clk);
3643 udelay(5);
3644 dprintk("%c",(bus_in(btv,btv->mbox_most) == 0)?'T':'-');
3645 bus_low(btv,btv->mbox_clk);
3646 value <<= 1;
3647 value |= (bus_in(btv,btv->mbox_data) == 0)?0:1; /* MSB first */
3648 dprintk("%c", (bus_in(btv,btv->mbox_most) == 0)?'S':'M');
3649 }
3650 dprintk("\nbttv%d: tea5757: read 0x%X\n", btv->c.nr, value);
3651 return value;
3652 }
3653
3654 static int tea5757_write(struct bttv *btv, int value)
3655 {
3656 int i;
3657 int reg = value;
3658
3659 gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we | btv->mbox_data);
3660
3661 if (btv->mbox_ior) {
3662 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
3663 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
3664 udelay(5);
3665 }
3666 if (bttv_gpio)
3667 bttv_gpio_tracking(btv,"tea5757 write");
3668
3669 dprintk("bttv%d: tea5757: write 0x%X\n", btv->c.nr, value);
3670 bus_low(btv,btv->mbox_clk);
3671 bus_high(btv,btv->mbox_we);
3672 for(i = 0; i < 25; i++)
3673 {
3674 if (reg & 0x1000000)
3675 bus_high(btv,btv->mbox_data);
3676 else
3677 bus_low(btv,btv->mbox_data);
3678 reg <<= 1;
3679 bus_high(btv,btv->mbox_clk);
3680 udelay(10);
3681 bus_low(btv,btv->mbox_clk);
3682 udelay(10);
3683 }
3684 bus_low(btv,btv->mbox_we); /* unmute !!! */
3685 return 0;
3686 }
3687
3688 void tea5757_set_freq(struct bttv *btv, unsigned short freq)
3689 {
3690 dprintk("tea5757_set_freq %d\n",freq);
3691 tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */
3692 }
3693
3694
3695 /* ----------------------------------------------------------------------- */
3696 /* winview */
3697
3698 void winview_audio(struct bttv *btv, struct video_audio *v, int set)
3699 {
3700 /* PT2254A programming Jon Tombs, jon@gte.esi.us.es */
3701 int bits_out, loops, vol, data;
3702
3703 if (!set) {
3704 /* Fixed by Leandro Lucarella <luca@linuxmendoza.org.ar (07/31/01) */
3705 v->flags |= VIDEO_AUDIO_VOLUME;
3706 return;
3707 }
3708
3709 /* 32 levels logarithmic */
3710 vol = 32 - ((v->volume>>11));
3711 /* units */
3712 bits_out = (PT2254_DBS_IN_2>>(vol%5));
3713 /* tens */
3714 bits_out |= (PT2254_DBS_IN_10>>(vol/5));
3715 bits_out |= PT2254_L_CHANNEL | PT2254_R_CHANNEL;
3716 data = gpio_read();
3717 data &= ~(WINVIEW_PT2254_CLK| WINVIEW_PT2254_DATA|
3718 WINVIEW_PT2254_STROBE);
3719 for (loops = 17; loops >= 0 ; loops--) {
3720 if (bits_out & (1<<loops))
3721 data |= WINVIEW_PT2254_DATA;
3722 else
3723 data &= ~WINVIEW_PT2254_DATA;
3724 gpio_write(data);
3725 udelay(5);
3726 data |= WINVIEW_PT2254_CLK;
3727 gpio_write(data);
3728 udelay(5);
3729 data &= ~WINVIEW_PT2254_CLK;
3730 gpio_write(data);
3731 }
3732 data |= WINVIEW_PT2254_STROBE;
3733 data &= ~WINVIEW_PT2254_DATA;
3734 gpio_write(data);
3735 udelay(10);
3736 data &= ~WINVIEW_PT2254_STROBE;
3737 gpio_write(data);
3738 }
3739
3740 /* ----------------------------------------------------------------------- */
3741 /* mono/stereo control for various cards (which don't use i2c chips but */
3742 /* connect something to the GPIO pins */
3743
3744 static void
3745 gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set)
3746 {
3747 unsigned int con = 0;
3748
3749 if (set) {
3750 gpio_inout(0x300, 0x300);
3751 if (v->mode & VIDEO_SOUND_LANG1)
3752 con = 0x000;
3753 if (v->mode & VIDEO_SOUND_LANG2)
3754 con = 0x300;
3755 if (v->mode & VIDEO_SOUND_STEREO)
3756 con = 0x200;
3757 /* if (v->mode & VIDEO_SOUND_MONO)
3758 * con = 0x100; */
3759 gpio_bits(0x300, con);
3760 } else {
3761 v->mode = VIDEO_SOUND_STEREO |
3762 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
3763 }
3764 }
3765
3766 static void
3767 gvbctv5pci_audio(struct bttv *btv, struct video_audio *v, int set)
3768 {
3769 unsigned int val, con;
3770
3771 if (btv->radio_user)
3772 return;
3773
3774 val = gpio_read();
3775 if (set) {
3776 con = 0x000;
3777 if (v->mode & VIDEO_SOUND_LANG2) {
3778 if (v->mode & VIDEO_SOUND_LANG1) {
3779 /* LANG1 + LANG2 */
3780 con = 0x100;
3781 }
3782 else {
3783 /* LANG2 */
3784 con = 0x300;
3785 }
3786 }
3787 if (con != (val & 0x300)) {
3788 gpio_bits(0x300, con);
3789 if (bttv_gpio)
3790 bttv_gpio_tracking(btv,"gvbctv5pci");
3791 }
3792 } else {
3793 switch (val & 0x70) {
3794 case 0x10:
3795 v->mode = VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
3796 break;
3797 case 0x30:
3798 v->mode = VIDEO_SOUND_LANG2;
3799 break;
3800 case 0x50:
3801 v->mode = VIDEO_SOUND_LANG1;
3802 break;
3803 case 0x60:
3804 v->mode = VIDEO_SOUND_STEREO;
3805 break;
3806 case 0x70:
3807 v->mode = VIDEO_SOUND_MONO;
3808 break;
3809 default:
3810 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
3811 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
3812 }
3813 }
3814 }
3815
3816 /*
3817 * Mario Medina Nussbaum <medisoft@alohabbs.org.mx>
3818 * I discover that on BT848_GPIO_DATA address a byte 0xcce enable stereo,
3819 * 0xdde enables mono and 0xccd enables sap
3820 *
3821 * Petr Vandrovec <VANDROVE@vc.cvut.cz>
3822 * P.S.: At least mask in line above is wrong - GPIO pins 3,2 select
3823 * input/output sound connection, so both must be set for output mode.
3824 *
3825 * Looks like it's needed only for the "tvphone", the "tvphone 98"
3826 * handles this with a tda9840
3827 *
3828 */
3829 static void
3830 avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v, int set)
3831 {
3832 int val = 0;
3833
3834 if (set) {
3835 if (v->mode & VIDEO_SOUND_LANG2) /* SAP */
3836 val = 0x02;
3837 if (v->mode & VIDEO_SOUND_STEREO)
3838 val = 0x01;
3839 if (val) {
3840 gpio_bits(0x03,val);
3841 if (bttv_gpio)
3842 bttv_gpio_tracking(btv,"avermedia");
3843 }
3844 } else {
3845 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
3846 VIDEO_SOUND_LANG1;
3847 return;
3848 }
3849 }
3850
3851 static void
3852 avermedia_tv_stereo_audio(struct bttv *btv, struct video_audio *v, int set)
3853 {
3854 int val = 0;
3855
3856 if (set) {
3857 if (v->mode & VIDEO_SOUND_LANG2) /* SAP */
3858 val = 0x01;
3859 if (v->mode & VIDEO_SOUND_STEREO) /* STEREO */
3860 val = 0x02;
3861 btaor(val, ~0x03, BT848_GPIO_DATA);
3862 if (bttv_gpio)
3863 bttv_gpio_tracking(btv,"avermedia");
3864 } else {
3865 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
3866 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
3867 return;
3868 }
3869 }
3870
3871 /* Lifetec 9415 handling */
3872 static void
3873 lt9415_audio(struct bttv *btv, struct video_audio *v, int set)
3874 {
3875 int val = 0;
3876
3877 if (gpio_read() & 0x4000) {
3878 v->mode = VIDEO_SOUND_MONO;
3879 return;
3880 }
3881
3882 if (set) {
3883 if (v->mode & VIDEO_SOUND_LANG2) /* A2 SAP */
3884 val = 0x0080;
3885 if (v->mode & VIDEO_SOUND_STEREO) /* A2 stereo */
3886 val = 0x0880;
3887 if ((v->mode & VIDEO_SOUND_LANG1) ||
3888 (v->mode & VIDEO_SOUND_MONO))
3889 val = 0;
3890 gpio_bits(0x0880, val);
3891 if (bttv_gpio)
3892 bttv_gpio_tracking(btv,"lt9415");
3893 } else {
3894 /* autodetect doesn't work with this card :-( */
3895 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
3896 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
3897 return;
3898 }
3899 }
3900
3901 /* TDA9821 on TerraTV+ Bt848, Bt878 */
3902 static void
3903 terratv_audio(struct bttv *btv, struct video_audio *v, int set)
3904 {
3905 unsigned int con = 0;
3906
3907 if (set) {
3908 gpio_inout(0x180000,0x180000);
3909 if (v->mode & VIDEO_SOUND_LANG2)
3910 con = 0x080000;
3911 if (v->mode & VIDEO_SOUND_STEREO)
3912 con = 0x180000;
3913 gpio_bits(0x180000, con);
3914 if (bttv_gpio)
3915 bttv_gpio_tracking(btv,"terratv");
3916 } else {
3917 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
3918 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
3919 }
3920 }
3921
3922 static void
3923 winfast2000_audio(struct bttv *btv, struct video_audio *v, int set)
3924 {
3925 unsigned long val = 0;
3926
3927 if (set) {
3928 /*btor (0xc32000, BT848_GPIO_OUT_EN);*/
3929 if (v->mode & VIDEO_SOUND_MONO) /* Mono */
3930 val = 0x420000;
3931 if (v->mode & VIDEO_SOUND_LANG1) /* Mono */
3932 val = 0x420000;
3933 if (v->mode & VIDEO_SOUND_LANG2) /* SAP */
3934 val = 0x410000;
3935 if (v->mode & VIDEO_SOUND_STEREO) /* Stereo */
3936 val = 0x020000;
3937 if (val) {
3938 gpio_bits(0x430000, val);
3939 if (bttv_gpio)
3940 bttv_gpio_tracking(btv,"winfast2000");
3941 }
3942 } else {
3943 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
3944 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
3945 }
3946 }
3947
3948 /*
3949 * Dariusz Kowalewski <darekk@automex.pl>
3950 * sound control for Prolink PV-BT878P+9B (PixelView PlayTV Pro FM+NICAM
3951 * revision 9B has on-board TDA9874A sound decoder).
3952 *
3953 * Note: There are card variants without tda9874a. Forcing the "stereo sound route"
3954 * will mute this cards.
3955 */
3956 static void
3957 pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set)
3958 {
3959 unsigned int val = 0;
3960
3961 if (btv->radio_user)
3962 return;
3963
3964 if (set) {
3965 if (v->mode & VIDEO_SOUND_MONO) {
3966 val = 0x01;
3967 }
3968 if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2))
3969 || (v->mode & VIDEO_SOUND_STEREO)) {
3970 val = 0x02;
3971 }
3972 if (val) {
3973 gpio_bits(0x03,val);
3974 if (bttv_gpio)
3975 bttv_gpio_tracking(btv,"pvbt878p9b");
3976 }
3977 } else {
3978 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
3979 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
3980 }
3981 }
3982
3983 /*
3984 * Dariusz Kowalewski <darekk@automex.pl>
3985 * sound control for FlyVideo 2000S (with tda9874 decoder)
3986 * based on pvbt878p9b_audio() - this is not tested, please fix!!!
3987 */
3988 static void
3989 fv2000s_audio(struct bttv *btv, struct video_audio *v, int set)
3990 {
3991 unsigned int val = 0xffff;
3992
3993 if (btv->radio_user)
3994 return;
3995 if (set) {
3996 if (v->mode & VIDEO_SOUND_MONO) {
3997 val = 0x0000;
3998 }
3999 if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2))
4000 || (v->mode & VIDEO_SOUND_STEREO)) {
4001 val = 0x1080; /*-dk-???: 0x0880, 0x0080, 0x1800 ... */
4002 }
4003 if (val != 0xffff) {
4004 gpio_bits(0x1800, val);
4005 if (bttv_gpio)
4006 bttv_gpio_tracking(btv,"fv2000s");
4007 }
4008 } else {
4009 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4010 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4011 }
4012 }
4013
4014 /*
4015 * sound control for Canopus WinDVR PCI
4016 * Masaki Suzuki <masaki@btree.org>
4017 */
4018 static void
4019 windvr_audio(struct bttv *btv, struct video_audio *v, int set)
4020 {
4021 unsigned long val = 0;
4022
4023 if (set) {
4024 if (v->mode & VIDEO_SOUND_MONO)
4025 val = 0x040000;
4026 if (v->mode & VIDEO_SOUND_LANG1)
4027 val = 0;
4028 if (v->mode & VIDEO_SOUND_LANG2)
4029 val = 0x100000;
4030 if (v->mode & VIDEO_SOUND_STEREO)
4031 val = 0;
4032 if (val) {
4033 gpio_bits(0x140000, val);
4034 if (bttv_gpio)
4035 bttv_gpio_tracking(btv,"windvr");
4036 }
4037 } else {
4038 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4039 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4040 }
4041 }
4042
4043 /*
4044 * sound control for AD-TVK503
4045 * Hiroshi Takekawa <sian@big.or.jp>
4046 */
4047 static void
4048 adtvk503_audio(struct bttv *btv, struct video_audio *v, int set)
4049 {
4050 unsigned int con = 0xffffff;
4051
4052 /* btaor(0x1e0000, ~0x1e0000, BT848_GPIO_OUT_EN); */
4053
4054 if (set) {
4055 /* btor(***, BT848_GPIO_OUT_EN); */
4056 if (v->mode & VIDEO_SOUND_LANG1)
4057 con = 0x00000000;
4058 if (v->mode & VIDEO_SOUND_LANG2)
4059 con = 0x00180000;
4060 if (v->mode & VIDEO_SOUND_STEREO)
4061 con = 0x00000000;
4062 if (v->mode & VIDEO_SOUND_MONO)
4063 con = 0x00060000;
4064 if (con != 0xffffff) {
4065 gpio_bits(0x1e0000,con);
4066 if (bttv_gpio)
4067 bttv_gpio_tracking(btv, "adtvk503");
4068 }
4069 } else {
4070 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4071 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4072 }
4073 }
4074
4075 /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
4076 *
4077 * This is needed because rv605 don't use a normal multiplex, but a crosspoint
4078 * switch instead (CD22M3494E). This IC can have multiple active connections
4079 * between Xn (input) and Yn (output) pins. We need to clear any existing
4080 * connection prior to establish a new one, pulsing the STROBE pin.
4081 *
4082 * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
4083 * GPIO pins are wired as:
4084 * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroler)
4085 * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroler)
4086 * GPIO[7] - DATA (xpoint) - P1[7] (microcontroler)
4087 * GPIO[8] - - P3[5] (microcontroler)
4088 * GPIO[9] - RESET (xpoint) - P3[6] (microcontroler)
4089 * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroler)
4090 * GPINTR - - P3[4] (microcontroler)
4091 *
4092 * The microcontroler is a 80C32 like. It should be possible to change xpoint
4093 * configuration either directly (as we are doing) or using the microcontroler
4094 * which is also wired to I2C interface. I have no further info on the
4095 * microcontroler features, one would need to disassembly the firmware.
4096 * note: the vendor refused to give any information on this product, all
4097 * that stuff was found using a multimeter! :)
4098 */
4099 static void rv605_muxsel(struct bttv *btv, unsigned int input)
4100 {
4101 /* reset all conections */
4102 gpio_bits(0x200,0x200);
4103 mdelay(1);
4104 gpio_bits(0x200,0x000);
4105 mdelay(1);
4106
4107 /* create a new conection */
4108 gpio_bits(0x480,0x080);
4109 gpio_bits(0x480,0x480);
4110 mdelay(1);
4111 gpio_bits(0x480,0x080);
4112 mdelay(1);
4113 }
4114
4115 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
4116 *
4117 * The CS16 (available on eBay cheap) is a PCI board with four Fusion
4118 * 878A chips, a PCI bridge, an Atmel microcontroller, four sync seperator
4119 * chips, ten eight input analog multiplexors, a not chip and a few
4120 * other components.
4121 *
4122 * 16 inputs on a secondary bracket are provided and can be selected
4123 * from each of the four capture chips. Two of the eight input
4124 * multiplexors are used to select from any of the 16 input signals.
4125 *
4126 * Unsupported hardware capabilities:
4127 * . A video output monitor on the secondary bracket can be selected from
4128 * one of the 878A chips.
4129 * . Another passthrough but I haven't spent any time investigating it.
4130 * . Digital I/O (logic level connected to GPIO) is available from an
4131 * onboard header.
4132 *
4133 * The on chip input mux should always be set to 2.
4134 * GPIO[16:19] - Video input selection
4135 * GPIO[0:3] - Video output monitor select (only available from one 878A)
4136 * GPIO[?:?] - Digital I/O.
4137 *
4138 * There is an ATMEL microcontroller with an 8031 core on board. I have not
4139 * determined what function (if any) it provides. With the microcontroller
4140 * and sync seperator chips a guess is that it might have to do with video
4141 * switching and maybe some digital I/O.
4142 */
4143 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
4144 {
4145 /* video mux */
4146 gpio_bits(0x0f0000, input << 16);
4147 }
4148
4149 static void tibetCS16_init(struct bttv *btv)
4150 {
4151 /* enable gpio bits, mask obtained via btSpy */
4152 gpio_inout(0xffffff, 0x0f7fff);
4153 gpio_write(0x0f7fff);
4154 }
4155
4156 /*
4157 * The following routines for the Kodicom-4400r get a little mind-twisting.
4158 * There is a "master" controller and three "slave" controllers, together
4159 * an analog switch which connects any of 16 cameras to any of the BT87A's.
4160 * The analog switch is controlled by the "master", but the detection order
4161 * of the four BT878A chips is in an order which I just don't understand.
4162 * The "master" is actually the second controller to be detected. The
4163 * logic on the board uses logical numbers for the 4 controlers, but
4164 * those numbers are different from the detection sequence. When working
4165 * with the analog switch, we need to "map" from the detection sequence
4166 * over to the board's logical controller number. This mapping sequence
4167 * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
4168 * unit 3, the second (which is the master) is logical unit 0, etc.
4169 * We need to maintain the status of the analog switch (which of the 16
4170 * cameras is connected to which of the 4 controllers). Rather than
4171 * add to the bttv structure for this, we use the data reserved for
4172 * the mbox (unused for this card type).
4173 */
4174
4175 /*
4176 * First a routine to set the analog switch, which controls which camera
4177 * is routed to which controller. The switch comprises an X-address
4178 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4179 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4180 * A data value (gpio bit 7) of '1' enables the switch, and '0' disables
4181 * the switch. A STROBE bit (gpio bit 8) latches the data value into the
4182 * specified address. The idea is to set the address and data, then bring
4183 * STROBE high, and finally bring STROBE back to low.
4184 */
4185 static void kodicom4400r_write(struct bttv *btv,
4186 unsigned char xaddr,
4187 unsigned char yaddr,
4188 unsigned char data) {
4189 unsigned int udata;
4190
4191 udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf);
4192 gpio_bits(0x1ff, udata); /* write ADDR and DAT */
4193 gpio_bits(0x1ff, udata | (1 << 8)); /* strobe high */
4194 gpio_bits(0x1ff, udata); /* strobe low */
4195 }
4196
4197 /*
4198 * Next the mux select. Both the "master" and "slave" 'cards' (controllers)
4199 * use this routine. The routine finds the "master" for the card, maps
4200 * the controller number from the detected position over to the logical
4201 * number, writes the appropriate data to the analog switch, and housekeeps
4202 * the local copy of the switch information. The parameter 'input' is the
4203 * requested camera number (0 - 15).
4204 */
4205 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input)
4206 {
4207 char *sw_status;
4208 int xaddr, yaddr;
4209 struct bttv *mctlr;
4210 static unsigned char map[4] = {3, 0, 2, 1};
4211
4212 mctlr = master[btv->c.nr];
4213 if (mctlr == NULL) { /* ignore if master not yet detected */
4214 return;
4215 }
4216 yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */
4217 yaddr = map[yaddr];
4218 sw_status = (char *)(&mctlr->mbox_we);
4219 xaddr = input & 0xf;
4220 /* Check if the controller/camera pair has changed, else ignore */
4221 if (sw_status[yaddr] != xaddr)
4222 {
4223 /* "open" the old switch, "close" the new one, save the new */
4224 kodicom4400r_write(mctlr, sw_status[yaddr], yaddr, 0);
4225 sw_status[yaddr] = xaddr;
4226 kodicom4400r_write(mctlr, xaddr, yaddr, 1);
4227 }
4228 }
4229
4230 /*
4231 * During initialisation, we need to reset the analog switch. We
4232 * also preset the switch to map the 4 connectors on the card to the
4233 * *user's* (see above description of kodicom4400r_muxsel) channels
4234 * 0 through 3
4235 */
4236 static void kodicom4400r_init(struct bttv *btv)
4237 {
4238 char *sw_status = (char *)(&btv->mbox_we);
4239 int ix;
4240
4241 gpio_inout(0x0003ff, 0x0003ff);
4242 gpio_write(1 << 9); /* reset MUX */
4243 gpio_write(0);
4244 /* Preset camera 0 to the 4 controllers */
4245 for (ix=0; ix<4; ix++) {
4246 sw_status[ix] = ix;
4247 kodicom4400r_write(btv, ix, ix, 1);
4248 }
4249 /*
4250 * Since this is the "master", we need to set up the
4251 * other three controller chips' pointers to this structure
4252 * for later use in the muxsel routine.
4253 */
4254 if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3))
4255 return;
4256 master[btv->c.nr-1] = btv;
4257 master[btv->c.nr] = btv;
4258 master[btv->c.nr+1] = btv;
4259 master[btv->c.nr+2] = btv;
4260 }
4261
4262 /* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
4263 * video multiplexers to provide up to 16 video inputs. These
4264 * multiplexers are controlled by the lower 8 GPIO pins of the
4265 * bt878. The multiplexers probably Pericom PI5V331Q or similar.
4266
4267 * xxx0 is pin xxx of multiplexer U5,
4268 * yyy1 is pin yyy of multiplexer U2
4269 */
4270 #define ENA0 0x01
4271 #define ENB0 0x02
4272 #define ENA1 0x04
4273 #define ENB1 0x08
4274
4275 #define IN10 0x10
4276 #define IN00 0x20
4277 #define IN11 0x40
4278 #define IN01 0x80
4279
4280 static void xguard_muxsel(struct bttv *btv, unsigned int input)
4281 {
4282 static const int masks[] = {
4283 ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
4284 ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
4285 ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
4286 ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
4287 };
4288 gpio_write(masks[input%16]);
4289 }
4290 static void picolo_tetra_init(struct bttv *btv)
4291 {
4292 /*This is the video input redirection fonctionality : I DID NOT USED IT. */
4293 btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
4294 btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A] set to 1*/
4295 }
4296 static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
4297 {
4298
4299 dprintk (KERN_DEBUG "bttv%d : picolo_tetra_muxsel => input = %d\n",btv->c.nr,input);
4300 /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
4301 /*GPIO[20]&GPIO[21] used to choose the right input*/
4302 btwrite (input<<20,BT848_GPIO_DATA);
4303
4304 }
4305
4306 /*
4307 * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
4308 *
4309 * The IVC120G security card has 4 i2c controlled TDA8540 matrix
4310 * swichers to provide 16 channels to MUX0. The TDA8540's have
4311 * 4 indepedant outputs and as such the IVC120G also has the
4312 * optional "Monitor Out" bus. This allows the card to be looking
4313 * at one input while the monitor is looking at another.
4314 *
4315 * Since I've couldn't be bothered figuring out how to add an
4316 * independant muxsel for the monitor bus, I've just set it to
4317 * whatever the card is looking at.
4318 *
4319 * OUT0 of the TDA8540's is connected to MUX0 (0x03)
4320 * OUT1 of the TDA8540's is connected to "Monitor Out" (0x0C)
4321 *
4322 * TDA8540_ALT3 IN0-3 = Channel 13 - 16 (0x03)
4323 * TDA8540_ALT4 IN0-3 = Channel 1 - 4 (0x03)
4324 * TDA8540_ALT5 IN0-3 = Channel 5 - 8 (0x03)
4325 * TDA8540_ALT6 IN0-3 = Channel 9 - 12 (0x03)
4326 *
4327 */
4328
4329 /* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
4330 #define I2C_TDA8540 0x90
4331 #define I2C_TDA8540_ALT1 0x92
4332 #define I2C_TDA8540_ALT2 0x94
4333 #define I2C_TDA8540_ALT3 0x96
4334 #define I2C_TDA8540_ALT4 0x98
4335 #define I2C_TDA8540_ALT5 0x9a
4336 #define I2C_TDA8540_ALT6 0x9c
4337
4338 static void ivc120_muxsel(struct bttv *btv, unsigned int input)
4339 {
4340 /* Simple maths */
4341 int key = input % 4;
4342 int matrix = input / 4;
4343
4344 dprintk("bttv%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
4345 btv->c.nr, input, matrix, key);
4346
4347 /* Handles the input selection on the TDA8540's */
4348 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
4349 ((matrix == 3) ? (key | key << 2) : 0x00), 1);
4350 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
4351 ((matrix == 0) ? (key | key << 2) : 0x00), 1);
4352 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
4353 ((matrix == 1) ? (key | key << 2) : 0x00), 1);
4354 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
4355 ((matrix == 2) ? (key | key << 2) : 0x00), 1);
4356
4357 /* Handles the output enables on the TDA8540's */
4358 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
4359 ((matrix == 3) ? 0x03 : 0x00), 1); /* 13 - 16 */
4360 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
4361 ((matrix == 0) ? 0x03 : 0x00), 1); /* 1-4 */
4362 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
4363 ((matrix == 1) ? 0x03 : 0x00), 1); /* 5-8 */
4364 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
4365 ((matrix == 2) ? 0x03 : 0x00), 1); /* 9-12 */
4366
4367 /* Selects MUX0 for input on the 878 */
4368 btaor((0)<<5, ~(3<<5), BT848_IFORM);
4369 }
4370
4371
4372 /* PXC200 muxsel helper
4373 * luke@syseng.anu.edu.au
4374 * another transplant
4375 * from Alessandro Rubini (rubini@linux.it)
4376 *
4377 * There are 4 kinds of cards:
4378 * PXC200L which is bt848
4379 * PXC200F which is bt848 with PIC controlling mux
4380 * PXC200AL which is bt878
4381 * PXC200AF which is bt878 with PIC controlling mux
4382 */
4383 #define PX_CFG_PXC200F 0x01
4384 #define PX_FLAG_PXC200A 0x00001000 /* a pxc200A is bt-878 based */
4385 #define PX_I2C_PIC 0x0f
4386 #define PX_PXC200A_CARDID 0x200a1295
4387 #define PX_I2C_CMD_CFG 0x00
4388
4389 static void PXC200_muxsel(struct bttv *btv, unsigned int input)
4390 {
4391 int rc;
4392 long mux;
4393 int bitmask;
4394 unsigned char buf[2];
4395
4396 /* Read PIC config to determine if this is a PXC200F */
4397 /* PX_I2C_CMD_CFG*/
4398 buf[0]=0;
4399 buf[1]=0;
4400 rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
4401 if (rc) {
4402 printk(KERN_DEBUG "bttv%d: PXC200_muxsel: pic cfg write failed:%d\n", btv->c.nr,rc);
4403 /* not PXC ? do nothing */
4404 return;
4405 }
4406
4407 rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
4408 if (!(rc & PX_CFG_PXC200F)) {
4409 printk(KERN_DEBUG "bttv%d: PXC200_muxsel: not PXC200F rc:%d \n", btv->c.nr,rc);
4410 return;
4411 }
4412
4413
4414 /* The multiplexer in the 200F is handled by the GPIO port */
4415 /* get correct mapping between inputs */
4416 /* mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
4417 /* ** not needed!? */
4418 mux = input;
4419
4420 /* make sure output pins are enabled */
4421 /* bitmask=0x30f; */
4422 bitmask=0x302;
4423 /* check whether we have a PXC200A */
4424 if (btv->cardid == PX_PXC200A_CARDID) {
4425 bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */
4426 bitmask |= 7<<4; /* the DAC */
4427 }
4428 btwrite(bitmask, BT848_GPIO_OUT_EN);
4429
4430 bitmask = btread(BT848_GPIO_DATA);
4431 if (btv->cardid == PX_PXC200A_CARDID)
4432 bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7);
4433 else /* older device */
4434 bitmask = (bitmask & ~0x300) | ((mux & 3) << 8);
4435 btwrite(bitmask,BT848_GPIO_DATA);
4436
4437 /*
4438 * Was "to be safe, set the bt848 to input 0"
4439 * Actually, since it's ok at load time, better not messing
4440 * with these bits (on PXC200AF you need to set mux 2 here)
4441 *
4442 * needed because bttv-driver sets mux before calling this function
4443 */
4444 if (btv->cardid == PX_PXC200A_CARDID)
4445 btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM);
4446 else /* older device */
4447 btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
4448
4449 printk(KERN_DEBUG "bttv%d: setting input channel to:%d\n", btv->c.nr,(int)mux);
4450 }
4451
4452 /* ----------------------------------------------------------------------- */
4453 /* motherboard chipset specific stuff */
4454
4455 void __devinit bttv_check_chipset(void)
4456 {
4457 int pcipci_fail = 0;
4458 struct pci_dev *dev = NULL;
4459
4460 if (pci_pci_problems & PCIPCI_FAIL)
4461 pcipci_fail = 1;
4462 if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
4463 triton1 = 1;
4464 if (pci_pci_problems & PCIPCI_VSFX)
4465 vsfx = 1;
4466 #ifdef PCIPCI_ALIMAGIK
4467 if (pci_pci_problems & PCIPCI_ALIMAGIK)
4468 latency = 0x0A;
4469 #endif
4470
4471
4472 /* print warnings about any quirks found */
4473 if (triton1)
4474 printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n");
4475 if (vsfx)
4476 printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n");
4477 if (pcipci_fail) {
4478 printk(KERN_WARNING "bttv: BT848 and your chipset may not work together.\n");
4479 if (!no_overlay) {
4480 printk(KERN_WARNING "bttv: overlay will be disabled.\n");
4481 no_overlay = 1;
4482 } else {
4483 printk(KERN_WARNING "bttv: overlay forced. Use this option at your own risk.\n");
4484 }
4485 }
4486 if (UNSET != latency)
4487 printk(KERN_INFO "bttv: pci latency fixup [%d]\n",latency);
4488
4489 while ((dev = pci_find_device(PCI_VENDOR_ID_INTEL,
4490 PCI_DEVICE_ID_INTEL_82441, dev))) {
4491 unsigned char b;
4492 pci_read_config_byte(dev, 0x53, &b);
4493 if (bttv_debug)
4494 printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, "
4495 "bufcon=0x%02x\n",b);
4496 }
4497 }
4498
4499 int __devinit bttv_handle_chipset(struct bttv *btv)
4500 {
4501 unsigned char command;
4502
4503 if (!triton1 && !vsfx && UNSET == latency)
4504 return 0;
4505
4506 if (bttv_verbose) {
4507 if (triton1)
4508 printk(KERN_INFO "bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->c.nr);
4509 if (vsfx && btv->id >= 878)
4510 printk(KERN_INFO "bttv%d: enabling VSFX\n",btv->c.nr);
4511 if (UNSET != latency)
4512 printk(KERN_INFO "bttv%d: setting pci timer to %d\n",
4513 btv->c.nr,latency);
4514 }
4515
4516 if (btv->id < 878) {
4517 /* bt848 (mis)uses a bit in the irq mask for etbf */
4518 if (triton1)
4519 btv->triton1 = BT848_INT_ETBF;
4520 } else {
4521 /* bt878 has a bit in the pci config space for it */
4522 pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command);
4523 if (triton1)
4524 command |= BT878_EN_TBFX;
4525 if (vsfx)
4526 command |= BT878_EN_VSFX;
4527 pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command);
4528 }
4529 if (UNSET != latency)
4530 pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency);
4531 return 0;
4532 }
4533
4534
4535 /*
4536 * Local variables:
4537 * c-basic-offset: 8
4538 * End:
4539 */
Software Suspend 2 for 2.6.18.y (mirror)