drivers/scsi/lpfc/lpfc_disc.h

   1 /*******************************************************************
   2  * This file is part of the Emulex Linux Device Driver for         *
   3  * Fibre Channel Host Bus Adapters.                                *
   4  * Copyright (C) 2004-2005 Emulex.  All rights reserved.           *
   5  * EMULEX and SLI are trademarks of Emulex.                        *
   6  * www.emulex.com                                                  *
   7  *                                                                 *
   8  * This program is free software; you can redistribute it and/or   *
   9  * modify it under the terms of version 2 of the GNU General       *
  10  * Public License as published by the Free Software Foundation.    *
  11  * This program is distributed in the hope that it will be useful. *
  12  * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
  13  * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
  14  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
  15  * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
  16  * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
  17  * more details, a copy of which can be found in the file COPYING  *
  18  * included with this package.                                     *
  19  *******************************************************************/
  20
  21 #define FC_MAX_HOLD_RSCN     32       /* max number of deferred RSCNs */
  22 #define FC_MAX_NS_RSP        65536    /* max size NameServer rsp */
  23 #define FC_MAXLOOP           126      /* max devices supported on a fc loop */
  24 #define LPFC_DISC_FLOGI_TMO  10       /* Discovery FLOGI ratov */
  25
  26
  27 /* This is the protocol dependent definition for a Node List Entry.
  28  * This is used by Fibre Channel protocol to support FCP.
  29  */
  30
  31 /* structure used to queue event to the discovery tasklet */
  32 struct lpfc_work_evt {
  33         struct list_head      evt_listp;
  34         void                * evt_arg1;
  35         void                * evt_arg2;
  36         uint32_t              evt;
  37 };
  38
  39 #define LPFC_EVT_NODEV_TMO      0x1
  40 #define LPFC_EVT_ONLINE         0x2
  41 #define LPFC_EVT_OFFLINE        0x3
  42 #define LPFC_EVT_ELS_RETRY      0x4
  43
  44 struct lpfc_nodelist {
  45         struct list_head nlp_listp;
  46         struct lpfc_name nlp_portname;          /* port name */
  47         struct lpfc_name nlp_nodename;          /* node name */
  48         uint32_t         nlp_flag;              /* entry  flags */
  49         uint32_t         nlp_DID;               /* FC D_ID of entry */
  50         uint32_t         nlp_last_elscmd;       /* Last ELS cmd sent */
  51         uint16_t         nlp_type;
  52 #define NLP_FC_NODE        0x1                  /* entry is an FC node */
  53 #define NLP_FABRIC         0x4                  /* entry rep a Fabric entity */
  54 #define NLP_FCP_TARGET     0x8                  /* entry is an FCP target */
  55 #define NLP_FCP_INITIATOR  0x10                 /* entry is an FCP Initiator */
  56
  57         uint16_t        nlp_rpi;
  58         uint16_t        nlp_state;              /* state transition indicator */
  59         uint16_t        nlp_xri;                /* output exchange id for RPI */
  60         uint16_t        nlp_sid;                /* scsi id */
  61 #define NLP_NO_SID              0xffff
  62         uint16_t        nlp_maxframe;           /* Max RCV frame size */
  63         uint8_t         nlp_class_sup;          /* Supported Classes */
  64         uint8_t         nlp_retry;              /* used for ELS retries */
  65         uint8_t         nlp_disc_refcnt;        /* used for DSM */
  66         uint8_t         nlp_fcp_info;           /* class info, bits 0-3 */
  67 #define NLP_FCP_2_DEVICE   0x10                 /* FCP-2 device */
  68
  69         struct timer_list   nlp_delayfunc;      /* Used for delayed ELS cmds */
  70         struct timer_list   nlp_tmofunc;        /* Used for nodev tmo */
  71         struct fc_rport *rport;                 /* Corresponding FC transport
  72                                                    port structure */
  73         struct lpfc_hba      *nlp_phba;
  74         struct lpfc_work_evt nodev_timeout_evt;
  75         struct lpfc_work_evt els_retry_evt;
  76         unsigned long last_ramp_up_time;        /* jiffy of last ramp up */
  77         unsigned long last_q_full_time;         /* jiffy of last queue full */
  78 };
  79
  80 /* Defines for nlp_flag (uint32) */
  81 #define NLP_NO_LIST        0x0          /* Indicates immediately free node */
  82 #define NLP_UNUSED_LIST    0x1          /* Flg to indicate node will be freed */
  83 #define NLP_PLOGI_LIST     0x2          /* Flg to indicate sent PLOGI */
  84 #define NLP_ADISC_LIST     0x3          /* Flg to indicate sent ADISC */
  85 #define NLP_REGLOGIN_LIST  0x4          /* Flg to indicate sent REG_LOGIN */
  86 #define NLP_PRLI_LIST      0x5          /* Flg to indicate sent PRLI */
  87 #define NLP_UNMAPPED_LIST  0x6          /* Node is now unmapped */
  88 #define NLP_MAPPED_LIST    0x7          /* Node is now mapped */
  89 #define NLP_NPR_LIST       0x8          /* Node is in NPort Recovery state */
  90 #define NLP_JUST_DQ        0x9          /* just deque ndlp in lpfc_nlp_list */
  91 #define NLP_LIST_MASK      0xf          /* mask to see what list node is on */
  92 #define NLP_PLOGI_SND      0x20         /* sent PLOGI request for this entry */
  93 #define NLP_PRLI_SND       0x40         /* sent PRLI request for this entry */
  94 #define NLP_ADISC_SND      0x80         /* sent ADISC request for this entry */
  95 #define NLP_LOGO_SND       0x100        /* sent LOGO request for this entry */
  96 #define NLP_RNID_SND       0x400        /* sent RNID request for this entry */
  97 #define NLP_ELS_SND_MASK   0x7e0        /* sent ELS request for this entry */
  98 #define NLP_NODEV_TMO      0x10000      /* nodev timeout is running for node */
  99 #define NLP_DELAY_TMO      0x20000      /* delay timeout is running for node */
 100 #define NLP_NPR_2B_DISC    0x40000      /* node is included in num_disc_nodes */
 101 #define NLP_RCV_PLOGI      0x80000      /* Rcv'ed PLOGI from remote system */
 102 #define NLP_LOGO_ACC       0x100000     /* Process LOGO after ACC completes */
 103 #define NLP_TGT_NO_SCSIID  0x200000     /* good PRLI but no binding for scsid */
 104 #define NLP_ACC_REGLOGIN   0x1000000    /* Issue Reg Login after successful
 105                                            ACC */
 106 #define NLP_NPR_ADISC      0x2000000    /* Issue ADISC when dq'ed from
 107                                            NPR list */
 108 #define NLP_DELAY_REMOVE   0x4000000    /* Defer removal till end of DSM */
 109
 110 /* Defines for list searchs */
 111 #define NLP_SEARCH_MAPPED    0x1        /* search mapped */
 112 #define NLP_SEARCH_UNMAPPED  0x2        /* search unmapped */
 113 #define NLP_SEARCH_PLOGI     0x4        /* search plogi */
 114 #define NLP_SEARCH_ADISC     0x8        /* search adisc */
 115 #define NLP_SEARCH_REGLOGIN  0x10       /* search reglogin */
 116 #define NLP_SEARCH_PRLI      0x20       /* search prli */
 117 #define NLP_SEARCH_NPR       0x40       /* search npr */
 118 #define NLP_SEARCH_UNUSED    0x80       /* search mapped */
 119 #define NLP_SEARCH_ALL       0xff       /* search all lists */
 120
 121 /* There are 4 different double linked lists nodelist entries can reside on.
 122  * The Port Login (PLOGI) list and Address Discovery (ADISC) list are used
 123  * when Link Up discovery or Registered State Change Notification (RSCN)
 124  * processing is needed.  Each list holds the nodes that require a PLOGI or
 125  * ADISC Extended Link Service (ELS) request.  These lists keep track of the
 126  * nodes affected by an RSCN, or a Link Up (Typically, all nodes are effected
 127  * by Link Up) event.  The unmapped_list contains all nodes that have
 128  * successfully logged into at the Fibre Channel level.  The
 129  * mapped_list will contain all nodes that are mapped FCP targets.
 130  *
 131  * The bind list is a list of undiscovered (potentially non-existent) nodes
 132  * that we have saved binding information on. This information is used when
 133  * nodes transition from the unmapped to the mapped list.
 134  */
 135
 136 /* Defines for nlp_state */
 137 #define NLP_STE_UNUSED_NODE       0x0   /* node is just allocated */
 138 #define NLP_STE_PLOGI_ISSUE       0x1   /* PLOGI was sent to NL_PORT */
 139 #define NLP_STE_ADISC_ISSUE       0x2   /* ADISC was sent to NL_PORT */
 140 #define NLP_STE_REG_LOGIN_ISSUE   0x3   /* REG_LOGIN was issued for NL_PORT */
 141 #define NLP_STE_PRLI_ISSUE        0x4   /* PRLI was sent to NL_PORT */
 142 #define NLP_STE_UNMAPPED_NODE     0x5   /* PRLI completed from NL_PORT */
 143 #define NLP_STE_MAPPED_NODE       0x6   /* Identified as a FCP Target */
 144 #define NLP_STE_NPR_NODE          0x7   /* NPort disappeared */
 145 #define NLP_STE_MAX_STATE         0x8
 146 #define NLP_STE_FREED_NODE        0xff  /* node entry was freed to MEM_NLP */
 147
 148 /* For UNUSED_NODE state, the node has just been allocated.
 149  * For PLOGI_ISSUE and REG_LOGIN_ISSUE, the node is on
 150  * the PLOGI list. For REG_LOGIN_COMPL, the node is taken off the PLOGI list
 151  * and put on the unmapped list. For ADISC processing, the node is taken off
 152  * the ADISC list and placed on either the mapped or unmapped list (depending
 153  * on its previous state). Once on the unmapped list, a PRLI is issued and the
 154  * state changed to PRLI_ISSUE. When the PRLI completion occurs, the state is
 155  * changed to PRLI_COMPL. If the completion indicates a mapped
 156  * node, the node is taken off the unmapped list. The binding list is checked
 157  * for a valid binding, or a binding is automatically assigned. If binding
 158  * assignment is unsuccessful, the node is left on the unmapped list. If
 159  * binding assignment is successful, the associated binding list entry (if
 160  * any) is removed, and the node is placed on the mapped list.
 161  */
 162 /*
 163  * For a Link Down, all nodes on the ADISC, PLOGI, unmapped or mapped
 164  * lists will receive a DEVICE_RECOVERY event. If the linkdown or nodev timers
 165  * expire, all effected nodes will receive a DEVICE_RM event.
 166  */
 167 /*
 168  * For a Link Up or RSCN, all nodes will move from the mapped / unmapped lists
 169  * to either the ADISC or PLOGI list.  After a Nameserver query or ALPA loopmap
 170  * check, additional nodes may be added (DEVICE_ADD) or removed (DEVICE_RM) to /
 171  * from the PLOGI or ADISC lists. Once the PLOGI and ADISC lists are populated,
 172  * we will first process the ADISC list.  32 entries are processed initially and
 173  * ADISC is initited for each one.  Completions / Events for each node are
 174  * funnelled thru the state machine.  As each node finishes ADISC processing, it
 175  * starts ADISC for any nodes waiting for ADISC processing. If no nodes are
 176  * waiting, and the ADISC list count is identically 0, then we are done. For
 177  * Link Up discovery, since all nodes on the PLOGI list are UNREG_LOGIN'ed, we
 178  * can issue a CLEAR_LA and reenable Link Events. Next we will process the PLOGI
 179  * list.  32 entries are processed initially and PLOGI is initited for each one.
 180  * Completions / Events for each node are funnelled thru the state machine.  As
 181  * each node finishes PLOGI processing, it starts PLOGI for any nodes waiting
 182  * for PLOGI processing. If no nodes are waiting, and the PLOGI list count is
 183  * identically 0, then we are done. We have now completed discovery / RSCN
 184  * handling. Upon completion, ALL nodes should be on either the mapped or
 185  * unmapped lists.
 186  */
 187
 188 /* Defines for Node List Entry Events that could happen */
 189 #define NLP_EVT_RCV_PLOGI         0x0   /* Rcv'd an ELS PLOGI command */
 190 #define NLP_EVT_RCV_PRLI          0x1   /* Rcv'd an ELS PRLI  command */
 191 #define NLP_EVT_RCV_LOGO          0x2   /* Rcv'd an ELS LOGO  command */
 192 #define NLP_EVT_RCV_ADISC         0x3   /* Rcv'd an ELS ADISC command */
 193 #define NLP_EVT_RCV_PDISC         0x4   /* Rcv'd an ELS PDISC command */
 194 #define NLP_EVT_RCV_PRLO          0x5   /* Rcv'd an ELS PRLO  command */
 195 #define NLP_EVT_CMPL_PLOGI        0x6   /* Sent an ELS PLOGI command */
 196 #define NLP_EVT_CMPL_PRLI         0x7   /* Sent an ELS PRLI  command */
 197 #define NLP_EVT_CMPL_LOGO         0x8   /* Sent an ELS LOGO  command */
 198 #define NLP_EVT_CMPL_ADISC        0x9   /* Sent an ELS ADISC command */
 199 #define NLP_EVT_CMPL_REG_LOGIN    0xa   /* REG_LOGIN mbox cmd completed */
 200 #define NLP_EVT_DEVICE_RM         0xb   /* Device not found in NS / ALPAmap */
 201 #define NLP_EVT_DEVICE_RECOVERY   0xc   /* Device existence unknown */
 202 #define NLP_EVT_MAX_EVENT         0xd
 203