Linux 2.6.18.8
[linux-2.6/suspend2-2.6.18.git] / drivers / block / cciss.h
blob868e0d862b0d274980857ee8593a385006ae2432
1 #ifndef CCISS_H
2 #define CCISS_H
4 #include <linux/genhd.h>
6 #include "cciss_cmd.h"
9 #define NWD 16
10 #define NWD_SHIFT 4
11 #define MAX_PART (1 << NWD_SHIFT)
13 #define IO_OK 0
14 #define IO_ERROR 1
16 struct ctlr_info;
17 typedef struct ctlr_info ctlr_info_t;
19 struct access_method {
20 void (*submit_command)(ctlr_info_t *h, CommandList_struct *c);
21 void (*set_intr_mask)(ctlr_info_t *h, unsigned long val);
22 unsigned long (*fifo_full)(ctlr_info_t *h);
23 unsigned long (*intr_pending)(ctlr_info_t *h);
24 unsigned long (*command_completed)(ctlr_info_t *h);
26 typedef struct _drive_info_struct
28 __u32 LunID;
29 int usage_count;
30 struct request_queue *queue;
31 sector_t nr_blocks;
32 int block_size;
33 int heads;
34 int sectors;
35 int cylinders;
36 int raid_level; /* set to -1 to indicate that
37 * the drive is not in use/configured
39 int busy_configuring; /*This is set when the drive is being removed
40 *to prevent it from being opened or it's queue
41 *from being started.
43 } drive_info_struct;
45 #ifdef CONFIG_CISS_SCSI_TAPE
47 struct sendcmd_reject_list {
48 int ncompletions;
49 unsigned long *complete; /* array of NR_CMDS tags */
52 #endif
53 struct ctlr_info
55 int ctlr;
56 char devname[8];
57 char *product_name;
58 char firm_ver[4]; // Firmware version
59 struct pci_dev *pdev;
60 __u32 board_id;
61 void __iomem *vaddr;
62 unsigned long paddr;
63 CfgTable_struct __iomem *cfgtable;
64 int interrupts_enabled;
65 int major;
66 int max_commands;
67 int commands_outstanding;
68 int max_outstanding; /* Debug */
69 int num_luns;
70 int highest_lun;
71 int usage_count; /* number of opens all all minor devices */
72 # define DOORBELL_INT 0
73 # define PERF_MODE_INT 1
74 # define SIMPLE_MODE_INT 2
75 # define MEMQ_MODE_INT 3
76 unsigned int intr[4];
77 unsigned int msix_vector;
78 unsigned int msi_vector;
80 // information about each logical volume
81 drive_info_struct drv[CISS_MAX_LUN];
83 struct access_method access;
85 /* queue and queue Info */
86 CommandList_struct *reqQ;
87 CommandList_struct *cmpQ;
88 unsigned int Qdepth;
89 unsigned int maxQsinceinit;
90 unsigned int maxSG;
91 spinlock_t lock;
93 //* pointers to command and error info pool */
94 CommandList_struct *cmd_pool;
95 dma_addr_t cmd_pool_dhandle;
96 ErrorInfo_struct *errinfo_pool;
97 dma_addr_t errinfo_pool_dhandle;
98 unsigned long *cmd_pool_bits;
99 int nr_allocs;
100 int nr_frees;
101 int busy_configuring;
102 int busy_initializing;
104 /* This element holds the zero based queue number of the last
105 * queue to be started. It is used for fairness.
107 int next_to_run;
109 // Disk structures we need to pass back
110 struct gendisk *gendisk[NWD];
111 #ifdef CONFIG_CISS_SCSI_TAPE
112 void *scsi_ctlr; /* ptr to structure containing scsi related stuff */
113 /* list of block side commands the scsi error handling sucked up */
114 /* and saved for later processing */
115 struct sendcmd_reject_list scsi_rejects;
116 #endif
117 unsigned char alive;
120 /* Defining the diffent access_menthods */
122 * Memory mapped FIFO interface (SMART 53xx cards)
124 #define SA5_DOORBELL 0x20
125 #define SA5_REQUEST_PORT_OFFSET 0x40
126 #define SA5_REPLY_INTR_MASK_OFFSET 0x34
127 #define SA5_REPLY_PORT_OFFSET 0x44
128 #define SA5_INTR_STATUS 0x30
129 #define SA5_SCRATCHPAD_OFFSET 0xB0
131 #define SA5_CTCFG_OFFSET 0xB4
132 #define SA5_CTMEM_OFFSET 0xB8
134 #define SA5_INTR_OFF 0x08
135 #define SA5B_INTR_OFF 0x04
136 #define SA5_INTR_PENDING 0x08
137 #define SA5B_INTR_PENDING 0x04
138 #define FIFO_EMPTY 0xffffffff
139 #define CCISS_FIRMWARE_READY 0xffff0000 /* value in scratchpad register */
141 #define CISS_ERROR_BIT 0x02
143 #define CCISS_INTR_ON 1
144 #define CCISS_INTR_OFF 0
146 Send the command to the hardware
148 static void SA5_submit_command( ctlr_info_t *h, CommandList_struct *c)
150 #ifdef CCISS_DEBUG
151 printk("Sending %x - down to controller\n", c->busaddr );
152 #endif /* CCISS_DEBUG */
153 writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
154 h->commands_outstanding++;
155 if ( h->commands_outstanding > h->max_outstanding)
156 h->max_outstanding = h->commands_outstanding;
160 * This card is the opposite of the other cards.
161 * 0 turns interrupts on...
162 * 0x08 turns them off...
164 static void SA5_intr_mask(ctlr_info_t *h, unsigned long val)
166 if (val)
167 { /* Turn interrupts on */
168 h->interrupts_enabled = 1;
169 writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
170 } else /* Turn them off */
172 h->interrupts_enabled = 0;
173 writel( SA5_INTR_OFF,
174 h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
178 * This card is the opposite of the other cards.
179 * 0 turns interrupts on...
180 * 0x04 turns them off...
182 static void SA5B_intr_mask(ctlr_info_t *h, unsigned long val)
184 if (val)
185 { /* Turn interrupts on */
186 h->interrupts_enabled = 1;
187 writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
188 } else /* Turn them off */
190 h->interrupts_enabled = 0;
191 writel( SA5B_INTR_OFF,
192 h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
196 * Returns true if fifo is full.
199 static unsigned long SA5_fifo_full(ctlr_info_t *h)
201 if( h->commands_outstanding >= h->max_commands)
202 return(1);
203 else
204 return(0);
208 * returns value read from hardware.
209 * returns FIFO_EMPTY if there is nothing to read
211 static unsigned long SA5_completed(ctlr_info_t *h)
213 unsigned long register_value
214 = readl(h->vaddr + SA5_REPLY_PORT_OFFSET);
215 if(register_value != FIFO_EMPTY)
217 h->commands_outstanding--;
218 #ifdef CCISS_DEBUG
219 printk("cciss: Read %lx back from board\n", register_value);
220 #endif /* CCISS_DEBUG */
222 #ifdef CCISS_DEBUG
223 else
225 printk("cciss: FIFO Empty read\n");
227 #endif
228 return ( register_value);
232 * Returns true if an interrupt is pending..
234 static unsigned long SA5_intr_pending(ctlr_info_t *h)
236 unsigned long register_value =
237 readl(h->vaddr + SA5_INTR_STATUS);
238 #ifdef CCISS_DEBUG
239 printk("cciss: intr_pending %lx\n", register_value);
240 #endif /* CCISS_DEBUG */
241 if( register_value & SA5_INTR_PENDING)
242 return 1;
243 return 0 ;
247 * Returns true if an interrupt is pending..
249 static unsigned long SA5B_intr_pending(ctlr_info_t *h)
251 unsigned long register_value =
252 readl(h->vaddr + SA5_INTR_STATUS);
253 #ifdef CCISS_DEBUG
254 printk("cciss: intr_pending %lx\n", register_value);
255 #endif /* CCISS_DEBUG */
256 if( register_value & SA5B_INTR_PENDING)
257 return 1;
258 return 0 ;
262 static struct access_method SA5_access = {
263 SA5_submit_command,
264 SA5_intr_mask,
265 SA5_fifo_full,
266 SA5_intr_pending,
267 SA5_completed,
270 static struct access_method SA5B_access = {
271 SA5_submit_command,
272 SA5B_intr_mask,
273 SA5_fifo_full,
274 SA5B_intr_pending,
275 SA5_completed,
278 struct board_type {
279 __u32 board_id;
280 char *product_name;
281 struct access_method *access;
284 #define CCISS_LOCK(i) (&hba[i]->lock)
286 #endif /* CCISS_H */