[PATCH] ide: move CONFIG_IDE_MAX_HWIFS into linux/ide.h
[linux-2.6/suspend2-2.6.18.git] / include / linux / mtd / mtd.h
blobb6f2fdae65c6c284b9f511d35301af420a049303
1 /*
2 * $Id: mtd.h,v 1.61 2005/11/07 11:14:54 gleixner Exp $
4 * Copyright (C) 1999-2003 David Woodhouse <dwmw2@infradead.org> et al.
6 * Released under GPL
7 */
9 #ifndef __MTD_MTD_H__
10 #define __MTD_MTD_H__
12 #ifndef __KERNEL__
13 #error This is a kernel header. Perhaps include mtd-user.h instead?
14 #endif
16 #include <linux/config.h>
17 #include <linux/types.h>
18 #include <linux/module.h>
19 #include <linux/uio.h>
20 #include <linux/notifier.h>
22 #include <linux/mtd/compatmac.h>
23 #include <mtd/mtd-abi.h>
25 #define MTD_CHAR_MAJOR 90
26 #define MTD_BLOCK_MAJOR 31
27 #define MAX_MTD_DEVICES 16
29 #define MTD_ERASE_PENDING 0x01
30 #define MTD_ERASING 0x02
31 #define MTD_ERASE_SUSPEND 0x04
32 #define MTD_ERASE_DONE 0x08
33 #define MTD_ERASE_FAILED 0x10
35 /* If the erase fails, fail_addr might indicate exactly which block failed. If
36 fail_addr = 0xffffffff, the failure was not at the device level or was not
37 specific to any particular block. */
38 struct erase_info {
39 struct mtd_info *mtd;
40 u_int32_t addr;
41 u_int32_t len;
42 u_int32_t fail_addr;
43 u_long time;
44 u_long retries;
45 u_int dev;
46 u_int cell;
47 void (*callback) (struct erase_info *self);
48 u_long priv;
49 u_char state;
50 struct erase_info *next;
53 struct mtd_erase_region_info {
54 u_int32_t offset; /* At which this region starts, from the beginning of the MTD */
55 u_int32_t erasesize; /* For this region */
56 u_int32_t numblocks; /* Number of blocks of erasesize in this region */
59 struct mtd_info {
60 u_char type;
61 u_int32_t flags;
62 u_int32_t size; // Total size of the MTD
64 /* "Major" erase size for the device. Naïve users may take this
65 * to be the only erase size available, or may use the more detailed
66 * information below if they desire
68 u_int32_t erasesize;
70 u_int32_t oobblock; // Size of OOB blocks (e.g. 512)
71 u_int32_t oobsize; // Amount of OOB data per block (e.g. 16)
72 u_int32_t ecctype;
73 u_int32_t eccsize;
76 * Reuse some of the above unused fields in the case of NOR flash
77 * with configurable programming regions to avoid modifying the
78 * user visible structure layout/size. Only valid when the
79 * MTD_PROGRAM_REGIONS flag is set.
80 * (Maybe we should have an union for those?)
82 #define MTD_PROGREGION_SIZE(mtd) (mtd)->oobblock
83 #define MTD_PROGREGION_CTRLMODE_VALID(mtd) (mtd)->oobsize
84 #define MTD_PROGREGION_CTRLMODE_INVALID(mtd) (mtd)->ecctype
86 // Kernel-only stuff starts here.
87 char *name;
88 int index;
90 // oobinfo is a nand_oobinfo structure, which can be set by iotcl (MEMSETOOBINFO)
91 struct nand_oobinfo oobinfo;
92 u_int32_t oobavail; // Number of bytes in OOB area available for fs
94 /* Data for variable erase regions. If numeraseregions is zero,
95 * it means that the whole device has erasesize as given above.
97 int numeraseregions;
98 struct mtd_erase_region_info *eraseregions;
100 /* This really shouldn't be here. It can go away in 2.5 */
101 u_int32_t bank_size;
103 int (*erase) (struct mtd_info *mtd, struct erase_info *instr);
105 /* This stuff for eXecute-In-Place */
106 int (*point) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char **mtdbuf);
108 /* We probably shouldn't allow XIP if the unpoint isn't a NULL */
109 void (*unpoint) (struct mtd_info *mtd, u_char * addr, loff_t from, size_t len);
112 int (*read) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
113 int (*write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);
115 int (*read_ecc) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel);
116 int (*write_ecc) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel);
118 int (*read_oob) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
119 int (*write_oob) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);
122 * Methods to access the protection register area, present in some
123 * flash devices. The user data is one time programmable but the
124 * factory data is read only.
126 int (*get_fact_prot_info) (struct mtd_info *mtd, struct otp_info *buf, size_t len);
127 int (*read_fact_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
128 int (*get_user_prot_info) (struct mtd_info *mtd, struct otp_info *buf, size_t len);
129 int (*read_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
130 int (*write_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
131 int (*lock_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len);
133 /* kvec-based read/write methods. We need these especially for NAND flash,
134 with its limited number of write cycles per erase.
135 NB: The 'count' parameter is the number of _vectors_, each of
136 which contains an (ofs, len) tuple.
138 int (*readv) (struct mtd_info *mtd, struct kvec *vecs, unsigned long count, loff_t from, size_t *retlen);
139 int (*readv_ecc) (struct mtd_info *mtd, struct kvec *vecs, unsigned long count, loff_t from,
140 size_t *retlen, u_char *eccbuf, struct nand_oobinfo *oobsel);
141 int (*writev) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, size_t *retlen);
142 int (*writev_ecc) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to,
143 size_t *retlen, u_char *eccbuf, struct nand_oobinfo *oobsel);
145 /* Sync */
146 void (*sync) (struct mtd_info *mtd);
148 /* Chip-supported device locking */
149 int (*lock) (struct mtd_info *mtd, loff_t ofs, size_t len);
150 int (*unlock) (struct mtd_info *mtd, loff_t ofs, size_t len);
152 /* Power Management functions */
153 int (*suspend) (struct mtd_info *mtd);
154 void (*resume) (struct mtd_info *mtd);
156 /* Bad block management functions */
157 int (*block_isbad) (struct mtd_info *mtd, loff_t ofs);
158 int (*block_markbad) (struct mtd_info *mtd, loff_t ofs);
160 struct notifier_block reboot_notifier; /* default mode before reboot */
162 void *priv;
164 struct module *owner;
165 int usecount;
169 /* Kernel-side ioctl definitions */
171 extern int add_mtd_device(struct mtd_info *mtd);
172 extern int del_mtd_device (struct mtd_info *mtd);
174 extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num);
176 extern void put_mtd_device(struct mtd_info *mtd);
179 struct mtd_notifier {
180 void (*add)(struct mtd_info *mtd);
181 void (*remove)(struct mtd_info *mtd);
182 struct list_head list;
186 extern void register_mtd_user (struct mtd_notifier *new);
187 extern int unregister_mtd_user (struct mtd_notifier *old);
189 int default_mtd_writev(struct mtd_info *mtd, const struct kvec *vecs,
190 unsigned long count, loff_t to, size_t *retlen);
192 int default_mtd_readv(struct mtd_info *mtd, struct kvec *vecs,
193 unsigned long count, loff_t from, size_t *retlen);
195 #define MTD_ERASE(mtd, args...) (*(mtd->erase))(mtd, args)
196 #define MTD_POINT(mtd, a,b,c,d) (*(mtd->point))(mtd, a,b,c, (u_char **)(d))
197 #define MTD_UNPOINT(mtd, arg) (*(mtd->unpoint))(mtd, (u_char *)arg)
198 #define MTD_READ(mtd, args...) (*(mtd->read))(mtd, args)
199 #define MTD_WRITE(mtd, args...) (*(mtd->write))(mtd, args)
200 #define MTD_READV(mtd, args...) (*(mtd->readv))(mtd, args)
201 #define MTD_WRITEV(mtd, args...) (*(mtd->writev))(mtd, args)
202 #define MTD_READECC(mtd, args...) (*(mtd->read_ecc))(mtd, args)
203 #define MTD_WRITEECC(mtd, args...) (*(mtd->write_ecc))(mtd, args)
204 #define MTD_READOOB(mtd, args...) (*(mtd->read_oob))(mtd, args)
205 #define MTD_WRITEOOB(mtd, args...) (*(mtd->write_oob))(mtd, args)
206 #define MTD_SYNC(mtd) do { if (mtd->sync) (*(mtd->sync))(mtd); } while (0)
209 #ifdef CONFIG_MTD_PARTITIONS
210 void mtd_erase_callback(struct erase_info *instr);
211 #else
212 static inline void mtd_erase_callback(struct erase_info *instr)
214 if (instr->callback)
215 instr->callback(instr);
217 #endif
220 * Debugging macro and defines
222 #define MTD_DEBUG_LEVEL0 (0) /* Quiet */
223 #define MTD_DEBUG_LEVEL1 (1) /* Audible */
224 #define MTD_DEBUG_LEVEL2 (2) /* Loud */
225 #define MTD_DEBUG_LEVEL3 (3) /* Noisy */
227 #ifdef CONFIG_MTD_DEBUG
228 #define DEBUG(n, args...) \
229 do { \
230 if (n <= CONFIG_MTD_DEBUG_VERBOSE) \
231 printk(KERN_INFO args); \
232 } while(0)
233 #else /* CONFIG_MTD_DEBUG */
234 #define DEBUG(n, args...) do { } while(0)
236 #endif /* CONFIG_MTD_DEBUG */
238 #endif /* __MTD_MTD_H__ */