?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
sched: fix init_hrtick() section mismatch warning
[linux-2.6/sactl.git] / drivers / serial / 8250_pci.c
blobc2f23933155b1cbfdff132b035f76d84b143a73a
1 /*
2 * linux/drivers/char/8250_pci.c
3 *
4 * Probe module for 8250/16550-type PCI serial ports.
5 *
6 * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
7 *
8 * Copyright (C) 2001 Russell King, All Rights Reserved.
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License.
13 */
14 #include <linux/module.h>
15 #include <linux/init.h>
16 #include <linux/pci.h>
17 #include <linux/string.h>
18 #include <linux/kernel.h>
19 #include <linux/slab.h>
20 #include <linux/delay.h>
21 #include <linux/tty.h>
22 #include <linux/serial_core.h>
23 #include <linux/8250_pci.h>
24 #include <linux/bitops.h>
25
26 #include <asm/byteorder.h>
27 #include <asm/io.h>
28
29 #include "8250.h"
30
31 #undef SERIAL_DEBUG_PCI
32
33 /*
34 * init function returns:
35 * > 0 - number of ports
36 * = 0 - use board->num_ports
37 * < 0 - error
38 */
39 struct pci_serial_quirk {
40 u32 vendor;
41 u32 device;
42 u32 subvendor;
43 u32 subdevice;
44 int (*init)(struct pci_dev *dev);
45 int (*setup)(struct serial_private *, struct pciserial_board *,
46 struct uart_port *, int);
47 void (*exit)(struct pci_dev *dev);
48 };
49
50 #define PCI_NUM_BAR_RESOURCES 6
51
52 struct serial_private {
53 struct pci_dev *dev;
54 unsigned int nr;
55 void __iomem *remapped_bar[PCI_NUM_BAR_RESOURCES];
56 struct pci_serial_quirk *quirk;
57 int line[0];
58 };
59
60 static void moan_device(const char *str, struct pci_dev *dev)
61 {
62 printk(KERN_WARNING "%s: %s\n"
63 KERN_WARNING "Please send the output of lspci -vv, this\n"
64 KERN_WARNING "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n"
65 KERN_WARNING "manufacturer and name of serial board or\n"
66 KERN_WARNING "modem board to rmk+serial@arm.linux.org.uk.\n",
67 pci_name(dev), str, dev->vendor, dev->device,
68 dev->subsystem_vendor, dev->subsystem_device);
69 }
70
71 static int
72 setup_port(struct serial_private *priv, struct uart_port *port,
73 int bar, int offset, int regshift)
74 {
75 struct pci_dev *dev = priv->dev;
76 unsigned long base, len;
77
78 if (bar >= PCI_NUM_BAR_RESOURCES)
79 return -EINVAL;
80
81 base = pci_resource_start(dev, bar);
82
83 if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) {
84 len = pci_resource_len(dev, bar);
85
86 if (!priv->remapped_bar[bar])
87 priv->remapped_bar[bar] = ioremap_nocache(base, len);
88 if (!priv->remapped_bar[bar])
89 return -ENOMEM;
90
91 port->iotype = UPIO_MEM;
92 port->iobase = 0;
93 port->mapbase = base + offset;
94 port->membase = priv->remapped_bar[bar] + offset;
95 port->regshift = regshift;
96 } else {
97 port->iotype = UPIO_PORT;
98 port->iobase = base + offset;
99 port->mapbase = 0;
100 port->membase = NULL;
101 port->regshift = 0;
102 }
103 return 0;
104 }
105
106 /*
107 * ADDI-DATA GmbH communication cards <info@addi-data.com>
108 */
109 static int addidata_apci7800_setup(struct serial_private *priv,
110 struct pciserial_board *board,
111 struct uart_port *port, int idx)
112 {
113 unsigned int bar = 0, offset = board->first_offset;
114 bar = FL_GET_BASE(board->flags);
115
116 if (idx < 2) {
117 offset += idx * board->uart_offset;
118 } else if ((idx >= 2) && (idx < 4)) {
119 bar += 1;
120 offset += ((idx - 2) * board->uart_offset);
121 } else if ((idx >= 4) && (idx < 6)) {
122 bar += 2;
123 offset += ((idx - 4) * board->uart_offset);
124 } else if (idx >= 6) {
125 bar += 3;
126 offset += ((idx - 6) * board->uart_offset);
127 }
128
129 return setup_port(priv, port, bar, offset, board->reg_shift);
130 }
131
132 /*
133 * AFAVLAB uses a different mixture of BARs and offsets
134 * Not that ugly ;) -- HW
135 */
136 static int
137 afavlab_setup(struct serial_private *priv, struct pciserial_board *board,
138 struct uart_port *port, int idx)
139 {
140 unsigned int bar, offset = board->first_offset;
141
142 bar = FL_GET_BASE(board->flags);
143 if (idx < 4)
144 bar += idx;
145 else {
146 bar = 4;
147 offset += (idx - 4) * board->uart_offset;
148 }
149
150 return setup_port(priv, port, bar, offset, board->reg_shift);
151 }
152
153 /*
154 * HP's Remote Management Console. The Diva chip came in several
155 * different versions. N-class, L2000 and A500 have two Diva chips, each
156 * with 3 UARTs (the third UART on the second chip is unused). Superdome
157 * and Keystone have one Diva chip with 3 UARTs. Some later machines have
158 * one Diva chip, but it has been expanded to 5 UARTs.
159 */
160 static int pci_hp_diva_init(struct pci_dev *dev)
161 {
162 int rc = 0;
163
164 switch (dev->subsystem_device) {
165 case PCI_DEVICE_ID_HP_DIVA_TOSCA1:
166 case PCI_DEVICE_ID_HP_DIVA_HALFDOME:
167 case PCI_DEVICE_ID_HP_DIVA_KEYSTONE:
168 case PCI_DEVICE_ID_HP_DIVA_EVEREST:
169 rc = 3;
170 break;
171 case PCI_DEVICE_ID_HP_DIVA_TOSCA2:
172 rc = 2;
173 break;
174 case PCI_DEVICE_ID_HP_DIVA_MAESTRO:
175 rc = 4;
176 break;
177 case PCI_DEVICE_ID_HP_DIVA_POWERBAR:
178 case PCI_DEVICE_ID_HP_DIVA_HURRICANE:
179 rc = 1;
180 break;
181 }
182
183 return rc;
184 }
185
186 /*
187 * HP's Diva chip puts the 4th/5th serial port further out, and
188 * some serial ports are supposed to be hidden on certain models.
189 */
190 static int
191 pci_hp_diva_setup(struct serial_private *priv, struct pciserial_board *board,
192 struct uart_port *port, int idx)
193 {
194 unsigned int offset = board->first_offset;
195 unsigned int bar = FL_GET_BASE(board->flags);
196
197 switch (priv->dev->subsystem_device) {
198 case PCI_DEVICE_ID_HP_DIVA_MAESTRO:
199 if (idx == 3)
200 idx++;
201 break;
202 case PCI_DEVICE_ID_HP_DIVA_EVEREST:
203 if (idx > 0)
204 idx++;
205 if (idx > 2)
206 idx++;
207 break;
208 }
209 if (idx > 2)
210 offset = 0x18;
211
212 offset += idx * board->uart_offset;
213
214 return setup_port(priv, port, bar, offset, board->reg_shift);
215 }
216
217 /*
218 * Added for EKF Intel i960 serial boards
219 */
220 static int pci_inteli960ni_init(struct pci_dev *dev)
221 {
222 unsigned long oldval;
223
224 if (!(dev->subsystem_device & 0x1000))
225 return -ENODEV;
226
227 /* is firmware started? */
228 pci_read_config_dword(dev, 0x44, (void *)&oldval);
229 if (oldval == 0x00001000L) { /* RESET value */
230 printk(KERN_DEBUG "Local i960 firmware missing");
231 return -ENODEV;
232 }
233 return 0;
234 }
235
236 /*
237 * Some PCI serial cards using the PLX 9050 PCI interface chip require
238 * that the card interrupt be explicitly enabled or disabled. This
239 * seems to be mainly needed on card using the PLX which also use I/O
240 * mapped memory.
241 */
242 static int pci_plx9050_init(struct pci_dev *dev)
243 {
244 u8 irq_config;
245 void __iomem *p;
246
247 if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0) {
248 moan_device("no memory in bar 0", dev);
249 return 0;
250 }
251
252 irq_config = 0x41;
253 if (dev->vendor == PCI_VENDOR_ID_PANACOM ||
254 dev->subsystem_vendor == PCI_SUBVENDOR_ID_EXSYS)
255 irq_config = 0x43;
256
257 if ((dev->vendor == PCI_VENDOR_ID_PLX) &&
258 (dev->device == PCI_DEVICE_ID_PLX_ROMULUS))
259 /*
260 * As the megawolf cards have the int pins active
261 * high, and have 2 UART chips, both ints must be
262 * enabled on the 9050. Also, the UARTS are set in
263 * 16450 mode by default, so we have to enable the
264 * 16C950 'enhanced' mode so that we can use the
265 * deep FIFOs
266 */
267 irq_config = 0x5b;
268 /*
269 * enable/disable interrupts
270 */
271 p = ioremap_nocache(pci_resource_start(dev, 0), 0x80);
272 if (p == NULL)
273 return -ENOMEM;
274 writel(irq_config, p + 0x4c);
275
276 /*
277 * Read the register back to ensure that it took effect.
278 */
279 readl(p + 0x4c);
280 iounmap(p);
281
282 return 0;
283 }
284
285 static void __devexit pci_plx9050_exit(struct pci_dev *dev)
286 {
287 u8 __iomem *p;
288
289 if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0)
290 return;
291
292 /*
293 * disable interrupts
294 */
295 p = ioremap_nocache(pci_resource_start(dev, 0), 0x80);
296 if (p != NULL) {
297 writel(0, p + 0x4c);
298
299 /*
300 * Read the register back to ensure that it took effect.
301 */
302 readl(p + 0x4c);
303 iounmap(p);
304 }
305 }
306
307 /* SBS Technologies Inc. PMC-OCTPRO and P-OCTAL cards */
308 static int
309 sbs_setup(struct serial_private *priv, struct pciserial_board *board,
310 struct uart_port *port, int idx)
311 {
312 unsigned int bar, offset = board->first_offset;
313
314 bar = 0;
315
316 if (idx < 4) {
317 /* first four channels map to 0, 0x100, 0x200, 0x300 */
318 offset += idx * board->uart_offset;
319 } else if (idx < 8) {
320 /* last four channels map to 0x1000, 0x1100, 0x1200, 0x1300 */
321 offset += idx * board->uart_offset + 0xC00;
322 } else /* we have only 8 ports on PMC-OCTALPRO */
323 return 1;
324
325 return setup_port(priv, port, bar, offset, board->reg_shift);
326 }
327
328 /*
329 * This does initialization for PMC OCTALPRO cards:
330 * maps the device memory, resets the UARTs (needed, bc
331 * if the module is removed and inserted again, the card
332 * is in the sleep mode) and enables global interrupt.
333 */
334
335 /* global control register offset for SBS PMC-OctalPro */
336 #define OCT_REG_CR_OFF 0x500
337
338 static int sbs_init(struct pci_dev *dev)
339 {
340 u8 __iomem *p;
341
342 p = ioremap_nocache(pci_resource_start(dev, 0),
343 pci_resource_len(dev, 0));
344
345 if (p == NULL)
346 return -ENOMEM;
347 /* Set bit-4 Control Register (UART RESET) in to reset the uarts */
348 writeb(0x10, p + OCT_REG_CR_OFF);
349 udelay(50);
350 writeb(0x0, p + OCT_REG_CR_OFF);
351
352 /* Set bit-2 (INTENABLE) of Control Register */
353 writeb(0x4, p + OCT_REG_CR_OFF);
354 iounmap(p);
355
356 return 0;
357 }
358
359 /*
360 * Disables the global interrupt of PMC-OctalPro
361 */
362
363 static void __devexit sbs_exit(struct pci_dev *dev)
364 {
365 u8 __iomem *p;
366
367 p = ioremap_nocache(pci_resource_start(dev, 0),
368 pci_resource_len(dev, 0));
369 /* FIXME: What if resource_len < OCT_REG_CR_OFF */
370 if (p != NULL)
371 writeb(0, p + OCT_REG_CR_OFF);
372 iounmap(p);
373 }
374
375 /*
376 * SIIG serial cards have an PCI interface chip which also controls
377 * the UART clocking frequency. Each UART can be clocked independently
378 * (except cards equiped with 4 UARTs) and initial clocking settings
379 * are stored in the EEPROM chip. It can cause problems because this
380 * version of serial driver doesn't support differently clocked UART's
381 * on single PCI card. To prevent this, initialization functions set
382 * high frequency clocking for all UART's on given card. It is safe (I
383 * hope) because it doesn't touch EEPROM settings to prevent conflicts
384 * with other OSes (like M$ DOS).
385 *
386 * SIIG support added by Andrey Panin <pazke@donpac.ru>, 10/1999
387 *
388 * There is two family of SIIG serial cards with different PCI
389 * interface chip and different configuration methods:
390 * - 10x cards have control registers in IO and/or memory space;
391 * - 20x cards have control registers in standard PCI configuration space.
392 *
393 * Note: all 10x cards have PCI device ids 0x10..
394 * all 20x cards have PCI device ids 0x20..
395 *
396 * There are also Quartet Serial cards which use Oxford Semiconductor
397 * 16954 quad UART PCI chip clocked by 18.432 MHz quartz.
398 *
399 * Note: some SIIG cards are probed by the parport_serial object.
400 */
401
402 #define PCI_DEVICE_ID_SIIG_1S_10x (PCI_DEVICE_ID_SIIG_1S_10x_550 & 0xfffc)
403 #define PCI_DEVICE_ID_SIIG_2S_10x (PCI_DEVICE_ID_SIIG_2S_10x_550 & 0xfff8)
404
405 static int pci_siig10x_init(struct pci_dev *dev)
406 {
407 u16 data;
408 void __iomem *p;
409
410 switch (dev->device & 0xfff8) {
411 case PCI_DEVICE_ID_SIIG_1S_10x: /* 1S */
412 data = 0xffdf;
413 break;
414 case PCI_DEVICE_ID_SIIG_2S_10x: /* 2S, 2S1P */
415 data = 0xf7ff;
416 break;
417 default: /* 1S1P, 4S */
418 data = 0xfffb;
419 break;
420 }
421
422 p = ioremap_nocache(pci_resource_start(dev, 0), 0x80);
423 if (p == NULL)
424 return -ENOMEM;
425
426 writew(readw(p + 0x28) & data, p + 0x28);
427 readw(p + 0x28);
428 iounmap(p);
429 return 0;
430 }
431
432 #define PCI_DEVICE_ID_SIIG_2S_20x (PCI_DEVICE_ID_SIIG_2S_20x_550 & 0xfffc)
433 #define PCI_DEVICE_ID_SIIG_2S1P_20x (PCI_DEVICE_ID_SIIG_2S1P_20x_550 & 0xfffc)
434
435 static int pci_siig20x_init(struct pci_dev *dev)
436 {
437 u8 data;
438
439 /* Change clock frequency for the first UART. */
440 pci_read_config_byte(dev, 0x6f, &data);
441 pci_write_config_byte(dev, 0x6f, data & 0xef);
442
443 /* If this card has 2 UART, we have to do the same with second UART. */
444 if (((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S_20x) ||
445 ((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S1P_20x)) {
446 pci_read_config_byte(dev, 0x73, &data);
447 pci_write_config_byte(dev, 0x73, data & 0xef);
448 }
449 return 0;
450 }
451
452 static int pci_siig_init(struct pci_dev *dev)
453 {
454 unsigned int type = dev->device & 0xff00;
455
456 if (type == 0x1000)
457 return pci_siig10x_init(dev);
458 else if (type == 0x2000)
459 return pci_siig20x_init(dev);
460
461 moan_device("Unknown SIIG card", dev);
462 return -ENODEV;
463 }
464
465 static int pci_siig_setup(struct serial_private *priv,
466 struct pciserial_board *board,
467 struct uart_port *port, int idx)
468 {
469 unsigned int bar = FL_GET_BASE(board->flags) + idx, offset = 0;
470
471 if (idx > 3) {
472 bar = 4;
473 offset = (idx - 4) * 8;
474 }
475
476 return setup_port(priv, port, bar, offset, 0);
477 }
478
479 /*
480 * Timedia has an explosion of boards, and to avoid the PCI table from
481 * growing *huge*, we use this function to collapse some 70 entries
482 * in the PCI table into one, for sanity's and compactness's sake.
483 */
484 static const unsigned short timedia_single_port[] = {
485 0x4025, 0x4027, 0x4028, 0x5025, 0x5027, 0
486 };
487
488 static const unsigned short timedia_dual_port[] = {
489 0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085,
490 0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079,
491 0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079,
492 0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079,
493 0xD079, 0
494 };
495
496 static const unsigned short timedia_quad_port[] = {
497 0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157,
498 0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159,
499 0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056,
500 0xB157, 0
501 };
502
503 static const unsigned short timedia_eight_port[] = {
504 0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166,
505 0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0
506 };
507
508 static const struct timedia_struct {
509 int num;
510 const unsigned short *ids;
511 } timedia_data[] = {
512 { 1, timedia_single_port },
513 { 2, timedia_dual_port },
514 { 4, timedia_quad_port },
515 { 8, timedia_eight_port }
516 };
517
518 static int pci_timedia_init(struct pci_dev *dev)
519 {
520 const unsigned short *ids;
521 int i, j;
522
523 for (i = 0; i < ARRAY_SIZE(timedia_data); i++) {
524 ids = timedia_data[i].ids;
525 for (j = 0; ids[j]; j++)
526 if (dev->subsystem_device == ids[j])
527 return timedia_data[i].num;
528 }
529 return 0;
530 }
531
532 /*
533 * Timedia/SUNIX uses a mixture of BARs and offsets
534 * Ugh, this is ugly as all hell --- TYT
535 */
536 static int
537 pci_timedia_setup(struct serial_private *priv, struct pciserial_board *board,
538 struct uart_port *port, int idx)
539 {
540 unsigned int bar = 0, offset = board->first_offset;
541
542 switch (idx) {
543 case 0:
544 bar = 0;
545 break;
546 case 1:
547 offset = board->uart_offset;
548 bar = 0;
549 break;
550 case 2:
551 bar = 1;
552 break;
553 case 3:
554 offset = board->uart_offset;
555 /* FALLTHROUGH */
556 case 4: /* BAR 2 */
557 case 5: /* BAR 3 */
558 case 6: /* BAR 4 */
559 case 7: /* BAR 5 */
560 bar = idx - 2;
561 }
562
563 return setup_port(priv, port, bar, offset, board->reg_shift);
564 }
565
566 /*
567 * Some Titan cards are also a little weird
568 */
569 static int
570 titan_400l_800l_setup(struct serial_private *priv,
571 struct pciserial_board *board,
572 struct uart_port *port, int idx)
573 {
574 unsigned int bar, offset = board->first_offset;
575
576 switch (idx) {
577 case 0:
578 bar = 1;
579 break;
580 case 1:
581 bar = 2;
582 break;
583 default:
584 bar = 4;
585 offset = (idx - 2) * board->uart_offset;
586 }
587
588 return setup_port(priv, port, bar, offset, board->reg_shift);
589 }
590
591 static int pci_xircom_init(struct pci_dev *dev)
592 {
593 msleep(100);
594 return 0;
595 }
596
597 static int pci_netmos_init(struct pci_dev *dev)
598 {
599 /* subdevice 0x00PS means <P> parallel, <S> serial */
600 unsigned int num_serial = dev->subsystem_device & 0xf;
601
602 if (num_serial == 0)
603 return -ENODEV;
604 return num_serial;
605 }
606
607 /*
608 * ITE support by Niels de Vos <niels.devos@wincor-nixdorf.com>
609 *
610 * These chips are available with optionally one parallel port and up to
611 * two serial ports. Unfortunately they all have the same product id.
612 *
613 * Basic configuration is done over a region of 32 I/O ports. The base
614 * ioport is called INTA or INTC, depending on docs/other drivers.
615 *
616 * The region of the 32 I/O ports is configured in POSIO0R...
617 */
618
619 /* registers */
620 #define ITE_887x_MISCR 0x9c
621 #define ITE_887x_INTCBAR 0x78
622 #define ITE_887x_UARTBAR 0x7c
623 #define ITE_887x_PS0BAR 0x10
624 #define ITE_887x_POSIO0 0x60
625
626 /* I/O space size */
627 #define ITE_887x_IOSIZE 32
628 /* I/O space size (bits 26-24; 8 bytes = 011b) */
629 #define ITE_887x_POSIO_IOSIZE_8 (3 << 24)
630 /* I/O space size (bits 26-24; 32 bytes = 101b) */
631 #define ITE_887x_POSIO_IOSIZE_32 (5 << 24)
632 /* Decoding speed (1 = slow, 2 = medium, 3 = fast) */
633 #define ITE_887x_POSIO_SPEED (3 << 29)
634 /* enable IO_Space bit */
635 #define ITE_887x_POSIO_ENABLE (1 << 31)
636
637 static int pci_ite887x_init(struct pci_dev *dev)
638 {
639 /* inta_addr are the configuration addresses of the ITE */
640 static const short inta_addr[] = { 0x2a0, 0x2c0, 0x220, 0x240, 0x1e0,
641 0x200, 0x280, 0 };
642 int ret, i, type;
643 struct resource *iobase = NULL;
644 u32 miscr, uartbar, ioport;
645
646 /* search for the base-ioport */
647 i = 0;
648 while (inta_addr[i] && iobase == NULL) {
649 iobase = request_region(inta_addr[i], ITE_887x_IOSIZE,
650 "ite887x");
651 if (iobase != NULL) {
652 /* write POSIO0R - speed | size | ioport */
653 pci_write_config_dword(dev, ITE_887x_POSIO0,
654 ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED |
655 ITE_887x_POSIO_IOSIZE_32 | inta_addr[i]);
656 /* write INTCBAR - ioport */
657 pci_write_config_dword(dev, ITE_887x_INTCBAR,
658 inta_addr[i]);
659 ret = inb(inta_addr[i]);
660 if (ret != 0xff) {
661 /* ioport connected */
662 break;
663 }
664 release_region(iobase->start, ITE_887x_IOSIZE);
665 iobase = NULL;
666 }
667 i++;
668 }
669
670 if (!inta_addr[i]) {
671 printk(KERN_ERR "ite887x: could not find iobase\n");
672 return -ENODEV;
673 }
674
675 /* start of undocumented type checking (see parport_pc.c) */
676 type = inb(iobase->start + 0x18) & 0x0f;
677
678 switch (type) {
679 case 0x2: /* ITE8871 (1P) */
680 case 0xa: /* ITE8875 (1P) */
681 ret = 0;
682 break;
683 case 0xe: /* ITE8872 (2S1P) */
684 ret = 2;
685 break;
686 case 0x6: /* ITE8873 (1S) */
687 ret = 1;
688 break;
689 case 0x8: /* ITE8874 (2S) */
690 ret = 2;
691 break;
692 default:
693 moan_device("Unknown ITE887x", dev);
694 ret = -ENODEV;
695 }
696
697 /* configure all serial ports */
698 for (i = 0; i < ret; i++) {
699 /* read the I/O port from the device */
700 pci_read_config_dword(dev, ITE_887x_PS0BAR + (0x4 * (i + 1)),
701 &ioport);
702 ioport &= 0x0000FF00; /* the actual base address */
703 pci_write_config_dword(dev, ITE_887x_POSIO0 + (0x4 * (i + 1)),
704 ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED |
705 ITE_887x_POSIO_IOSIZE_8 | ioport);
706
707 /* write the ioport to the UARTBAR */
708 pci_read_config_dword(dev, ITE_887x_UARTBAR, &uartbar);
709 uartbar &= ~(0xffff << (16 * i)); /* clear half the reg */
710 uartbar |= (ioport << (16 * i)); /* set the ioport */
711 pci_write_config_dword(dev, ITE_887x_UARTBAR, uartbar);
712
713 /* get current config */
714 pci_read_config_dword(dev, ITE_887x_MISCR, &miscr);
715 /* disable interrupts (UARTx_Routing[3:0]) */
716 miscr &= ~(0xf << (12 - 4 * i));
717 /* activate the UART (UARTx_En) */
718 miscr |= 1 << (23 - i);
719 /* write new config with activated UART */
720 pci_write_config_dword(dev, ITE_887x_MISCR, miscr);
721 }
722
723 if (ret <= 0) {
724 /* the device has no UARTs if we get here */
725 release_region(iobase->start, ITE_887x_IOSIZE);
726 }
727
728 return ret;
729 }
730
731 static void __devexit pci_ite887x_exit(struct pci_dev *dev)
732 {
733 u32 ioport;
734 /* the ioport is bit 0-15 in POSIO0R */
735 pci_read_config_dword(dev, ITE_887x_POSIO0, &ioport);
736 ioport &= 0xffff;
737 release_region(ioport, ITE_887x_IOSIZE);
738 }
739
740 static int
741 pci_default_setup(struct serial_private *priv, struct pciserial_board *board,
742 struct uart_port *port, int idx)
743 {
744 unsigned int bar, offset = board->first_offset, maxnr;
745
746 bar = FL_GET_BASE(board->flags);
747 if (board->flags & FL_BASE_BARS)
748 bar += idx;
749 else
750 offset += idx * board->uart_offset;
751
752 maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) >>
753 (board->reg_shift + 3);
754
755 if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr)
756 return 1;
757
758 return setup_port(priv, port, bar, offset, board->reg_shift);
759 }
760
761 /* This should be in linux/pci_ids.h */
762 #define PCI_VENDOR_ID_SBSMODULARIO 0x124B
763 #define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B
764 #define PCI_DEVICE_ID_OCTPRO 0x0001
765 #define PCI_SUBDEVICE_ID_OCTPRO232 0x0108
766 #define PCI_SUBDEVICE_ID_OCTPRO422 0x0208
767 #define PCI_SUBDEVICE_ID_POCTAL232 0x0308
768 #define PCI_SUBDEVICE_ID_POCTAL422 0x0408
769
770 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */
771 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584
772
773 /*
774 * Master list of serial port init/setup/exit quirks.
775 * This does not describe the general nature of the port.
776 * (ie, baud base, number and location of ports, etc)
777 *
778 * This list is ordered alphabetically by vendor then device.
779 * Specific entries must come before more generic entries.
780 */
781 static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
782 /*
783 * ADDI-DATA GmbH communication cards <info@addi-data.com>
784 */
785 {
786 .vendor = PCI_VENDOR_ID_ADDIDATA_OLD,
787 .device = PCI_DEVICE_ID_ADDIDATA_APCI7800,
788 .subvendor = PCI_ANY_ID,
789 .subdevice = PCI_ANY_ID,
790 .setup = addidata_apci7800_setup,
791 },
792 /*
793 * AFAVLAB cards - these may be called via parport_serial
794 * It is not clear whether this applies to all products.
795 */
796 {
797 .vendor = PCI_VENDOR_ID_AFAVLAB,
798 .device = PCI_ANY_ID,
799 .subvendor = PCI_ANY_ID,
800 .subdevice = PCI_ANY_ID,
801 .setup = afavlab_setup,
802 },
803 /*
804 * HP Diva
805 */
806 {
807 .vendor = PCI_VENDOR_ID_HP,
808 .device = PCI_DEVICE_ID_HP_DIVA,
809 .subvendor = PCI_ANY_ID,
810 .subdevice = PCI_ANY_ID,
811 .init = pci_hp_diva_init,
812 .setup = pci_hp_diva_setup,
813 },
814 /*
815 * Intel
816 */
817 {
818 .vendor = PCI_VENDOR_ID_INTEL,
819 .device = PCI_DEVICE_ID_INTEL_80960_RP,
820 .subvendor = 0xe4bf,
821 .subdevice = PCI_ANY_ID,
822 .init = pci_inteli960ni_init,
823 .setup = pci_default_setup,
824 },
825 /*
826 * ITE
827 */
828 {
829 .vendor = PCI_VENDOR_ID_ITE,
830 .device = PCI_DEVICE_ID_ITE_8872,
831 .subvendor = PCI_ANY_ID,
832 .subdevice = PCI_ANY_ID,
833 .init = pci_ite887x_init,
834 .setup = pci_default_setup,
835 .exit = __devexit_p(pci_ite887x_exit),
836 },
837 /*
838 * Panacom
839 */
840 {
841 .vendor = PCI_VENDOR_ID_PANACOM,
842 .device = PCI_DEVICE_ID_PANACOM_QUADMODEM,
843 .subvendor = PCI_ANY_ID,
844 .subdevice = PCI_ANY_ID,
845 .init = pci_plx9050_init,
846 .setup = pci_default_setup,
847 .exit = __devexit_p(pci_plx9050_exit),
848 },
849 {
850 .vendor = PCI_VENDOR_ID_PANACOM,
851 .device = PCI_DEVICE_ID_PANACOM_DUALMODEM,
852 .subvendor = PCI_ANY_ID,
853 .subdevice = PCI_ANY_ID,
854 .init = pci_plx9050_init,
855 .setup = pci_default_setup,
856 .exit = __devexit_p(pci_plx9050_exit),
857 },
858 /*
859 * PLX
860 */
861 {
862 .vendor = PCI_VENDOR_ID_PLX,
863 .device = PCI_DEVICE_ID_PLX_9030,
864 .subvendor = PCI_SUBVENDOR_ID_PERLE,
865 .subdevice = PCI_ANY_ID,
866 .setup = pci_default_setup,
867 },
868 {
869 .vendor = PCI_VENDOR_ID_PLX,
870 .device = PCI_DEVICE_ID_PLX_9050,
871 .subvendor = PCI_SUBVENDOR_ID_EXSYS,
872 .subdevice = PCI_SUBDEVICE_ID_EXSYS_4055,
873 .init = pci_plx9050_init,
874 .setup = pci_default_setup,
875 .exit = __devexit_p(pci_plx9050_exit),
876 },
877 {
878 .vendor = PCI_VENDOR_ID_PLX,
879 .device = PCI_DEVICE_ID_PLX_9050,
880 .subvendor = PCI_SUBVENDOR_ID_KEYSPAN,
881 .subdevice = PCI_SUBDEVICE_ID_KEYSPAN_SX2,
882 .init = pci_plx9050_init,
883 .setup = pci_default_setup,
884 .exit = __devexit_p(pci_plx9050_exit),
885 },
886 {
887 .vendor = PCI_VENDOR_ID_PLX,
888 .device = PCI_DEVICE_ID_PLX_9050,
889 .subvendor = PCI_VENDOR_ID_PLX,
890 .subdevice = PCI_SUBDEVICE_ID_UNKNOWN_0x1584,
891 .init = pci_plx9050_init,
892 .setup = pci_default_setup,
893 .exit = __devexit_p(pci_plx9050_exit),
894 },
895 {
896 .vendor = PCI_VENDOR_ID_PLX,
897 .device = PCI_DEVICE_ID_PLX_ROMULUS,
898 .subvendor = PCI_VENDOR_ID_PLX,
899 .subdevice = PCI_DEVICE_ID_PLX_ROMULUS,
900 .init = pci_plx9050_init,
901 .setup = pci_default_setup,
902 .exit = __devexit_p(pci_plx9050_exit),
903 },
904 /*
905 * SBS Technologies, Inc., PMC-OCTALPRO 232
906 */
907 {
908 .vendor = PCI_VENDOR_ID_SBSMODULARIO,
909 .device = PCI_DEVICE_ID_OCTPRO,
910 .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO,
911 .subdevice = PCI_SUBDEVICE_ID_OCTPRO232,
912 .init = sbs_init,
913 .setup = sbs_setup,
914 .exit = __devexit_p(sbs_exit),
915 },
916 /*
917 * SBS Technologies, Inc., PMC-OCTALPRO 422
918 */
919 {
920 .vendor = PCI_VENDOR_ID_SBSMODULARIO,
921 .device = PCI_DEVICE_ID_OCTPRO,
922 .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO,
923 .subdevice = PCI_SUBDEVICE_ID_OCTPRO422,
924 .init = sbs_init,
925 .setup = sbs_setup,
926 .exit = __devexit_p(sbs_exit),
927 },
928 /*
929 * SBS Technologies, Inc., P-Octal 232
930 */
931 {
932 .vendor = PCI_VENDOR_ID_SBSMODULARIO,
933 .device = PCI_DEVICE_ID_OCTPRO,
934 .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO,
935 .subdevice = PCI_SUBDEVICE_ID_POCTAL232,
936 .init = sbs_init,
937 .setup = sbs_setup,
938 .exit = __devexit_p(sbs_exit),
939 },
940 /*
941 * SBS Technologies, Inc., P-Octal 422
942 */
943 {
944 .vendor = PCI_VENDOR_ID_SBSMODULARIO,
945 .device = PCI_DEVICE_ID_OCTPRO,
946 .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO,
947 .subdevice = PCI_SUBDEVICE_ID_POCTAL422,
948 .init = sbs_init,
949 .setup = sbs_setup,
950 .exit = __devexit_p(sbs_exit),
951 },
952 /*
953 * SIIG cards - these may be called via parport_serial
954 */
955 {
956 .vendor = PCI_VENDOR_ID_SIIG,
957 .device = PCI_ANY_ID,
958 .subvendor = PCI_ANY_ID,
959 .subdevice = PCI_ANY_ID,
960 .init = pci_siig_init,
961 .setup = pci_siig_setup,
962 },
963 /*
964 * Titan cards
965 */
966 {
967 .vendor = PCI_VENDOR_ID_TITAN,
968 .device = PCI_DEVICE_ID_TITAN_400L,
969 .subvendor = PCI_ANY_ID,
970 .subdevice = PCI_ANY_ID,
971 .setup = titan_400l_800l_setup,
972 },
973 {
974 .vendor = PCI_VENDOR_ID_TITAN,
975 .device = PCI_DEVICE_ID_TITAN_800L,
976 .subvendor = PCI_ANY_ID,
977 .subdevice = PCI_ANY_ID,
978 .setup = titan_400l_800l_setup,
979 },
980 /*
981 * Timedia cards
982 */
983 {
984 .vendor = PCI_VENDOR_ID_TIMEDIA,
985 .device = PCI_DEVICE_ID_TIMEDIA_1889,
986 .subvendor = PCI_VENDOR_ID_TIMEDIA,
987 .subdevice = PCI_ANY_ID,
988 .init = pci_timedia_init,
989 .setup = pci_timedia_setup,
990 },
991 {
992 .vendor = PCI_VENDOR_ID_TIMEDIA,
993 .device = PCI_ANY_ID,
994 .subvendor = PCI_ANY_ID,
995 .subdevice = PCI_ANY_ID,
996 .setup = pci_timedia_setup,
997 },
998 /*
999 * Xircom cards
1000 */
1001 {
1002 .vendor = PCI_VENDOR_ID_XIRCOM,
1003 .device = PCI_DEVICE_ID_XIRCOM_X3201_MDM,
1004 .subvendor = PCI_ANY_ID,
1005 .subdevice = PCI_ANY_ID,
1006 .init = pci_xircom_init,
1007 .setup = pci_default_setup,
1008 },
1009 /*
1010 * Netmos cards - these may be called via parport_serial
1011 */
1012 {
1013 .vendor = PCI_VENDOR_ID_NETMOS,
1014 .device = PCI_ANY_ID,
1015 .subvendor = PCI_ANY_ID,
1016 .subdevice = PCI_ANY_ID,
1017 .init = pci_netmos_init,
1018 .setup = pci_default_setup,
1019 },
1020 /*
1021 * Default "match everything" terminator entry
1022 */
1023 {
1024 .vendor = PCI_ANY_ID,
1025 .device = PCI_ANY_ID,
1026 .subvendor = PCI_ANY_ID,
1027 .subdevice = PCI_ANY_ID,
1028 .setup = pci_default_setup,
1029 }
1030 };
1031
1032 static inline int quirk_id_matches(u32 quirk_id, u32 dev_id)
1033 {
1034 return quirk_id == PCI_ANY_ID || quirk_id == dev_id;
1035 }
1036
1037 static struct pci_serial_quirk *find_quirk(struct pci_dev *dev)
1038 {
1039 struct pci_serial_quirk *quirk;
1040
1041 for (quirk = pci_serial_quirks; ; quirk++)
1042 if (quirk_id_matches(quirk->vendor, dev->vendor) &&
1043 quirk_id_matches(quirk->device, dev->device) &&
1044 quirk_id_matches(quirk->subvendor, dev->subsystem_vendor) &&
1045 quirk_id_matches(quirk->subdevice, dev->subsystem_device))
1046 break;
1047 return quirk;
1048 }
1049
1050 static inline int get_pci_irq(struct pci_dev *dev,
1051 struct pciserial_board *board)
1052 {
1053 if (board->flags & FL_NOIRQ)
1054 return 0;
1055 else
1056 return dev->irq;
1057 }
1058
1059 /*
1060 * This is the configuration table for all of the PCI serial boards
1061 * which we support. It is directly indexed by the pci_board_num_t enum
1062 * value, which is encoded in the pci_device_id PCI probe table's
1063 * driver_data member.
1064 *
1065 * The makeup of these names are:
1066 * pbn_bn{_bt}_n_baud{_offsetinhex}
1067 *
1068 * bn = PCI BAR number
1069 * bt = Index using PCI BARs
1070 * n = number of serial ports
1071 * baud = baud rate
1072 * offsetinhex = offset for each sequential port (in hex)
1073 *
1074 * This table is sorted by (in order): bn, bt, baud, offsetindex, n.
1075 *
1076 * Please note: in theory if n = 1, _bt infix should make no difference.
1077 * ie, pbn_b0_1_115200 is the same as pbn_b0_bt_1_115200
1078 */
1079 enum pci_board_num_t {
1080 pbn_default = 0,
1081
1082 pbn_b0_1_115200,
1083 pbn_b0_2_115200,
1084 pbn_b0_4_115200,
1085 pbn_b0_5_115200,
1086 pbn_b0_8_115200,
1087
1088 pbn_b0_1_921600,
1089 pbn_b0_2_921600,
1090 pbn_b0_4_921600,
1091
1092 pbn_b0_2_1130000,
1093
1094 pbn_b0_4_1152000,
1095
1096 pbn_b0_2_1843200,
1097 pbn_b0_4_1843200,
1098
1099 pbn_b0_2_1843200_200,
1100 pbn_b0_4_1843200_200,
1101 pbn_b0_8_1843200_200,
1102
1103 pbn_b0_bt_1_115200,
1104 pbn_b0_bt_2_115200,
1105 pbn_b0_bt_8_115200,
1106
1107 pbn_b0_bt_1_460800,
1108 pbn_b0_bt_2_460800,
1109 pbn_b0_bt_4_460800,
1110
1111 pbn_b0_bt_1_921600,
1112 pbn_b0_bt_2_921600,
1113 pbn_b0_bt_4_921600,
1114 pbn_b0_bt_8_921600,
1115
1116 pbn_b1_1_115200,
1117 pbn_b1_2_115200,
1118 pbn_b1_4_115200,
1119 pbn_b1_8_115200,
1120
1121 pbn_b1_1_921600,
1122 pbn_b1_2_921600,
1123 pbn_b1_4_921600,
1124 pbn_b1_8_921600,
1125
1126 pbn_b1_2_1250000,
1127
1128 pbn_b1_bt_1_115200,
1129 pbn_b1_bt_2_921600,
1130
1131 pbn_b1_1_1382400,
1132 pbn_b1_2_1382400,
1133 pbn_b1_4_1382400,
1134 pbn_b1_8_1382400,
1135
1136 pbn_b2_1_115200,
1137 pbn_b2_2_115200,
1138 pbn_b2_4_115200,
1139 pbn_b2_8_115200,
1140
1141 pbn_b2_1_460800,
1142 pbn_b2_4_460800,
1143 pbn_b2_8_460800,
1144 pbn_b2_16_460800,
1145
1146 pbn_b2_1_921600,
1147 pbn_b2_4_921600,
1148 pbn_b2_8_921600,
1149
1150 pbn_b2_bt_1_115200,
1151 pbn_b2_bt_2_115200,
1152 pbn_b2_bt_4_115200,
1153
1154 pbn_b2_bt_2_921600,
1155 pbn_b2_bt_4_921600,
1156
1157 pbn_b3_2_115200,
1158 pbn_b3_4_115200,
1159 pbn_b3_8_115200,
1160
1161 /*
1162 * Board-specific versions.
1163 */
1164 pbn_panacom,
1165 pbn_panacom2,
1166 pbn_panacom4,
1167 pbn_exsys_4055,
1168 pbn_plx_romulus,
1169 pbn_oxsemi,
1170 pbn_intel_i960,
1171 pbn_sgi_ioc3,
1172 pbn_computone_4,
1173 pbn_computone_6,
1174 pbn_computone_8,
1175 pbn_sbsxrsio,
1176 pbn_exar_XR17C152,
1177 pbn_exar_XR17C154,
1178 pbn_exar_XR17C158,
1179 pbn_pasemi_1682M,
1180 };
1181
1182 /*
1183 * uart_offset - the space between channels
1184 * reg_shift - describes how the UART registers are mapped
1185 * to PCI memory by the card.
1186 * For example IER register on SBS, Inc. PMC-OctPro is located at
1187 * offset 0x10 from the UART base, while UART_IER is defined as 1
1188 * in include/linux/serial_reg.h,
1189 * see first lines of serial_in() and serial_out() in 8250.c
1190 */
1191
1192 static struct pciserial_board pci_boards[] __devinitdata = {
1193 [pbn_default] = {
1194 .flags = FL_BASE0,
1195 .num_ports = 1,
1196 .base_baud = 115200,
1197 .uart_offset = 8,
1198 },
1199 [pbn_b0_1_115200] = {
1200 .flags = FL_BASE0,
1201 .num_ports = 1,
1202 .base_baud = 115200,
1203 .uart_offset = 8,
1204 },
1205 [pbn_b0_2_115200] = {
1206 .flags = FL_BASE0,
1207 .num_ports = 2,
1208 .base_baud = 115200,
1209 .uart_offset = 8,
1210 },
1211 [pbn_b0_4_115200] = {
1212 .flags = FL_BASE0,
1213 .num_ports = 4,
1214 .base_baud = 115200,
1215 .uart_offset = 8,
1216 },
1217 [pbn_b0_5_115200] = {
1218 .flags = FL_BASE0,
1219 .num_ports = 5,
1220 .base_baud = 115200,
1221 .uart_offset = 8,
1222 },
1223 [pbn_b0_8_115200] = {
1224 .flags = FL_BASE0,
1225 .num_ports = 8,
1226 .base_baud = 115200,
1227 .uart_offset = 8,
1228 },
1229 [pbn_b0_1_921600] = {
1230 .flags = FL_BASE0,
1231 .num_ports = 1,
1232 .base_baud = 921600,
1233 .uart_offset = 8,
1234 },
1235 [pbn_b0_2_921600] = {
1236 .flags = FL_BASE0,
1237 .num_ports = 2,
1238 .base_baud = 921600,
1239 .uart_offset = 8,
1240 },
1241 [pbn_b0_4_921600] = {
1242 .flags = FL_BASE0,
1243 .num_ports = 4,
1244 .base_baud = 921600,
1245 .uart_offset = 8,
1246 },
1247
1248 [pbn_b0_2_1130000] = {
1249 .flags = FL_BASE0,
1250 .num_ports = 2,
1251 .base_baud = 1130000,
1252 .uart_offset = 8,
1253 },
1254
1255 [pbn_b0_4_1152000] = {
1256 .flags = FL_BASE0,
1257 .num_ports = 4,
1258 .base_baud = 1152000,
1259 .uart_offset = 8,
1260 },
1261
1262 [pbn_b0_2_1843200] = {
1263 .flags = FL_BASE0,
1264 .num_ports = 2,
1265 .base_baud = 1843200,
1266 .uart_offset = 8,
1267 },
1268 [pbn_b0_4_1843200] = {
1269 .flags = FL_BASE0,
1270 .num_ports = 4,
1271 .base_baud = 1843200,
1272 .uart_offset = 8,
1273 },
1274
1275 [pbn_b0_2_1843200_200] = {
1276 .flags = FL_BASE0,
1277 .num_ports = 2,
1278 .base_baud = 1843200,
1279 .uart_offset = 0x200,
1280 },
1281 [pbn_b0_4_1843200_200] = {
1282 .flags = FL_BASE0,
1283 .num_ports = 4,
1284 .base_baud = 1843200,
1285 .uart_offset = 0x200,
1286 },
1287 [pbn_b0_8_1843200_200] = {
1288 .flags = FL_BASE0,
1289 .num_ports = 8,
1290 .base_baud = 1843200,
1291 .uart_offset = 0x200,
1292 },
1293
1294 [pbn_b0_bt_1_115200] = {
1295 .flags = FL_BASE0|FL_BASE_BARS,
1296 .num_ports = 1,
1297 .base_baud = 115200,
1298 .uart_offset = 8,
1299 },
1300 [pbn_b0_bt_2_115200] = {
1301 .flags = FL_BASE0|FL_BASE_BARS,
1302 .num_ports = 2,
1303 .base_baud = 115200,
1304 .uart_offset = 8,
1305 },
1306 [pbn_b0_bt_8_115200] = {
1307 .flags = FL_BASE0|FL_BASE_BARS,
1308 .num_ports = 8,
1309 .base_baud = 115200,
1310 .uart_offset = 8,
1311 },
1312
1313 [pbn_b0_bt_1_460800] = {
1314 .flags = FL_BASE0|FL_BASE_BARS,
1315 .num_ports = 1,
1316 .base_baud = 460800,
1317 .uart_offset = 8,
1318 },
1319 [pbn_b0_bt_2_460800] = {
1320 .flags = FL_BASE0|FL_BASE_BARS,
1321 .num_ports = 2,
1322 .base_baud = 460800,
1323 .uart_offset = 8,
1324 },
1325 [pbn_b0_bt_4_460800] = {
1326 .flags = FL_BASE0|FL_BASE_BARS,
1327 .num_ports = 4,
1328 .base_baud = 460800,
1329 .uart_offset = 8,
1330 },
1331
1332 [pbn_b0_bt_1_921600] = {
1333 .flags = FL_BASE0|FL_BASE_BARS,
1334 .num_ports = 1,
1335 .base_baud = 921600,
1336 .uart_offset = 8,
1337 },
1338 [pbn_b0_bt_2_921600] = {
1339 .flags = FL_BASE0|FL_BASE_BARS,
1340 .num_ports = 2,
1341 .base_baud = 921600,
1342 .uart_offset = 8,
1343 },
1344 [pbn_b0_bt_4_921600] = {
1345 .flags = FL_BASE0|FL_BASE_BARS,
1346 .num_ports = 4,
1347 .base_baud = 921600,
1348 .uart_offset = 8,
1349 },
1350 [pbn_b0_bt_8_921600] = {
1351 .flags = FL_BASE0|FL_BASE_BARS,
1352 .num_ports = 8,
1353 .base_baud = 921600,
1354 .uart_offset = 8,
1355 },
1356
1357 [pbn_b1_1_115200] = {
1358 .flags = FL_BASE1,
1359 .num_ports = 1,
1360 .base_baud = 115200,
1361 .uart_offset = 8,
1362 },
1363 [pbn_b1_2_115200] = {
1364 .flags = FL_BASE1,
1365 .num_ports = 2,
1366 .base_baud = 115200,
1367 .uart_offset = 8,
1368 },
1369 [pbn_b1_4_115200] = {
1370 .flags = FL_BASE1,
1371 .num_ports = 4,
1372 .base_baud = 115200,
1373 .uart_offset = 8,
1374 },
1375 [pbn_b1_8_115200] = {
1376 .flags = FL_BASE1,
1377 .num_ports = 8,
1378 .base_baud = 115200,
1379 .uart_offset = 8,
1380 },
1381
1382 [pbn_b1_1_921600] = {
1383 .flags = FL_BASE1,
1384 .num_ports = 1,
1385 .base_baud = 921600,
1386 .uart_offset = 8,
1387 },
1388 [pbn_b1_2_921600] = {
1389 .flags = FL_BASE1,
1390 .num_ports = 2,
1391 .base_baud = 921600,
1392 .uart_offset = 8,
1393 },
1394 [pbn_b1_4_921600] = {
1395 .flags = FL_BASE1,
1396 .num_ports = 4,
1397 .base_baud = 921600,
1398 .uart_offset = 8,
1399 },
1400 [pbn_b1_8_921600] = {
1401 .flags = FL_BASE1,
1402 .num_ports = 8,
1403 .base_baud = 921600,
1404 .uart_offset = 8,
1405 },
1406 [pbn_b1_2_1250000] = {
1407 .flags = FL_BASE1,
1408 .num_ports = 2,
1409 .base_baud = 1250000,
1410 .uart_offset = 8,
1411 },
1412
1413 [pbn_b1_bt_1_115200] = {
1414 .flags = FL_BASE1|FL_BASE_BARS,
1415 .num_ports = 1,
1416 .base_baud = 115200,
1417 .uart_offset = 8,
1418 },
1419
1420 [pbn_b1_bt_2_921600] = {
1421 .flags = FL_BASE1|FL_BASE_BARS,
1422 .num_ports = 2,
1423 .base_baud = 921600,
1424 .uart_offset = 8,
1425 },
1426
1427 [pbn_b1_1_1382400] = {
1428 .flags = FL_BASE1,
1429 .num_ports = 1,
1430 .base_baud = 1382400,
1431 .uart_offset = 8,
1432 },
1433 [pbn_b1_2_1382400] = {
1434 .flags = FL_BASE1,
1435 .num_ports = 2,
1436 .base_baud = 1382400,
1437 .uart_offset = 8,
1438 },
1439 [pbn_b1_4_1382400] = {
1440 .flags = FL_BASE1,
1441 .num_ports = 4,
1442 .base_baud = 1382400,
1443 .uart_offset = 8,
1444 },
1445 [pbn_b1_8_1382400] = {
1446 .flags = FL_BASE1,
1447 .num_ports = 8,
1448 .base_baud = 1382400,
1449 .uart_offset = 8,
1450 },
1451
1452 [pbn_b2_1_115200] = {
1453 .flags = FL_BASE2,
1454 .num_ports = 1,
1455 .base_baud = 115200,
1456 .uart_offset = 8,
1457 },
1458 [pbn_b2_2_115200] = {
1459 .flags = FL_BASE2,
1460 .num_ports = 2,
1461 .base_baud = 115200,
1462 .uart_offset = 8,
1463 },
1464 [pbn_b2_4_115200] = {
1465 .flags = FL_BASE2,
1466 .num_ports = 4,
1467 .base_baud = 115200,
1468 .uart_offset = 8,
1469 },
1470 [pbn_b2_8_115200] = {
1471 .flags = FL_BASE2,
1472 .num_ports = 8,
1473 .base_baud = 115200,
1474 .uart_offset = 8,
1475 },
1476
1477 [pbn_b2_1_460800] = {
1478 .flags = FL_BASE2,
1479 .num_ports = 1,
1480 .base_baud = 460800,
1481 .uart_offset = 8,
1482 },
1483 [pbn_b2_4_460800] = {
1484 .flags = FL_BASE2,
1485 .num_ports = 4,
1486 .base_baud = 460800,
1487 .uart_offset = 8,
1488 },
1489 [pbn_b2_8_460800] = {
1490 .flags = FL_BASE2,
1491 .num_ports = 8,
1492 .base_baud = 460800,
1493 .uart_offset = 8,
1494 },
1495 [pbn_b2_16_460800] = {
1496 .flags = FL_BASE2,
1497 .num_ports = 16,
1498 .base_baud = 460800,
1499 .uart_offset = 8,
1500 },
1501
1502 [pbn_b2_1_921600] = {
1503 .flags = FL_BASE2,
1504 .num_ports = 1,
1505 .base_baud = 921600,
1506 .uart_offset = 8,
1507 },
1508 [pbn_b2_4_921600] = {
1509 .flags = FL_BASE2,
1510 .num_ports = 4,
1511 .base_baud = 921600,
1512 .uart_offset = 8,
1513 },
1514 [pbn_b2_8_921600] = {
1515 .flags = FL_BASE2,
1516 .num_ports = 8,
1517 .base_baud = 921600,
1518 .uart_offset = 8,
1519 },
1520
1521 [pbn_b2_bt_1_115200] = {
1522 .flags = FL_BASE2|FL_BASE_BARS,
1523 .num_ports = 1,
1524 .base_baud = 115200,
1525 .uart_offset = 8,
1526 },
1527 [pbn_b2_bt_2_115200] = {
1528 .flags = FL_BASE2|FL_BASE_BARS,
1529 .num_ports = 2,
1530 .base_baud = 115200,
1531 .uart_offset = 8,
1532 },
1533 [pbn_b2_bt_4_115200] = {
1534 .flags = FL_BASE2|FL_BASE_BARS,
1535 .num_ports = 4,
1536 .base_baud = 115200,
1537 .uart_offset = 8,
1538 },
1539
1540 [pbn_b2_bt_2_921600] = {
1541 .flags = FL_BASE2|FL_BASE_BARS,
1542 .num_ports = 2,
1543 .base_baud = 921600,
1544 .uart_offset = 8,
1545 },
1546 [pbn_b2_bt_4_921600] = {
1547 .flags = FL_BASE2|FL_BASE_BARS,
1548 .num_ports = 4,
1549 .base_baud = 921600,
1550 .uart_offset = 8,
1551 },
1552
1553 [pbn_b3_2_115200] = {
1554 .flags = FL_BASE3,
1555 .num_ports = 2,
1556 .base_baud = 115200,
1557 .uart_offset = 8,
1558 },
1559 [pbn_b3_4_115200] = {
1560 .flags = FL_BASE3,
1561 .num_ports = 4,
1562 .base_baud = 115200,
1563 .uart_offset = 8,
1564 },
1565 [pbn_b3_8_115200] = {
1566 .flags = FL_BASE3,
1567 .num_ports = 8,
1568 .base_baud = 115200,
1569 .uart_offset = 8,
1570 },
1571
1572 /*
1573 * Entries following this are board-specific.
1574 */
1575
1576 /*
1577 * Panacom - IOMEM
1578 */
1579 [pbn_panacom] = {
1580 .flags = FL_BASE2,
1581 .num_ports = 2,
1582 .base_baud = 921600,
1583 .uart_offset = 0x400,
1584 .reg_shift = 7,
1585 },
1586 [pbn_panacom2] = {
1587 .flags = FL_BASE2|FL_BASE_BARS,
1588 .num_ports = 2,
1589 .base_baud = 921600,
1590 .uart_offset = 0x400,
1591 .reg_shift = 7,
1592 },
1593 [pbn_panacom4] = {
1594 .flags = FL_BASE2|FL_BASE_BARS,
1595 .num_ports = 4,
1596 .base_baud = 921600,
1597 .uart_offset = 0x400,
1598 .reg_shift = 7,
1599 },
1600
1601 [pbn_exsys_4055] = {
1602 .flags = FL_BASE2,
1603 .num_ports = 4,
1604 .base_baud = 115200,
1605 .uart_offset = 8,
1606 },
1607
1608 /* I think this entry is broken - the first_offset looks wrong --rmk */
1609 [pbn_plx_romulus] = {
1610 .flags = FL_BASE2,
1611 .num_ports = 4,
1612 .base_baud = 921600,
1613 .uart_offset = 8 << 2,
1614 .reg_shift = 2,
1615 .first_offset = 0x03,
1616 },
1617
1618 /*
1619 * This board uses the size of PCI Base region 0 to
1620 * signal now many ports are available
1621 */
1622 [pbn_oxsemi] = {
1623 .flags = FL_BASE0|FL_REGION_SZ_CAP,
1624 .num_ports = 32,
1625 .base_baud = 115200,
1626 .uart_offset = 8,
1627 },
1628
1629 /*
1630 * EKF addition for i960 Boards form EKF with serial port.
1631 * Max 256 ports.
1632 */
1633 [pbn_intel_i960] = {
1634 .flags = FL_BASE0,
1635 .num_ports = 32,
1636 .base_baud = 921600,
1637 .uart_offset = 8 << 2,
1638 .reg_shift = 2,
1639 .first_offset = 0x10000,
1640 },
1641 [pbn_sgi_ioc3] = {
1642 .flags = FL_BASE0|FL_NOIRQ,
1643 .num_ports = 1,
1644 .base_baud = 458333,
1645 .uart_offset = 8,
1646 .reg_shift = 0,
1647 .first_offset = 0x20178,
1648 },
1649
1650 /*
1651 * Computone - uses IOMEM.
1652 */
1653 [pbn_computone_4] = {
1654 .flags = FL_BASE0,
1655 .num_ports = 4,
1656 .base_baud = 921600,
1657 .uart_offset = 0x40,
1658 .reg_shift = 2,
1659 .first_offset = 0x200,
1660 },
1661 [pbn_computone_6] = {
1662 .flags = FL_BASE0,
1663 .num_ports = 6,
1664 .base_baud = 921600,
1665 .uart_offset = 0x40,
1666 .reg_shift = 2,
1667 .first_offset = 0x200,
1668 },
1669 [pbn_computone_8] = {
1670 .flags = FL_BASE0,
1671 .num_ports = 8,
1672 .base_baud = 921600,
1673 .uart_offset = 0x40,
1674 .reg_shift = 2,
1675 .first_offset = 0x200,
1676 },
1677 [pbn_sbsxrsio] = {
1678 .flags = FL_BASE0,
1679 .num_ports = 8,
1680 .base_baud = 460800,
1681 .uart_offset = 256,
1682 .reg_shift = 4,
1683 },
1684 /*
1685 * Exar Corp. XR17C15[248] Dual/Quad/Octal UART
1686 * Only basic 16550A support.
1687 * XR17C15[24] are not tested, but they should work.
1688 */
1689 [pbn_exar_XR17C152] = {
1690 .flags = FL_BASE0,
1691 .num_ports = 2,
1692 .base_baud = 921600,
1693 .uart_offset = 0x200,
1694 },
1695 [pbn_exar_XR17C154] = {
1696 .flags = FL_BASE0,
1697 .num_ports = 4,
1698 .base_baud = 921600,
1699 .uart_offset = 0x200,
1700 },
1701 [pbn_exar_XR17C158] = {
1702 .flags = FL_BASE0,
1703 .num_ports = 8,
1704 .base_baud = 921600,
1705 .uart_offset = 0x200,
1706 },
1707 /*
1708 * PA Semi PWRficient PA6T-1682M on-chip UART
1709 */
1710 [pbn_pasemi_1682M] = {
1711 .flags = FL_BASE0,
1712 .num_ports = 1,
1713 .base_baud = 8333333,
1714 },
1715 };
1716
1717 static const struct pci_device_id softmodem_blacklist[] = {
1718 { PCI_VDEVICE(AL, 0x5457), }, /* ALi Corporation M5457 AC'97 Modem */
1719 };
1720
1721 /*
1722 * Given a complete unknown PCI device, try to use some heuristics to
1723 * guess what the configuration might be, based on the pitiful PCI
1724 * serial specs. Returns 0 on success, 1 on failure.
1725 */
1726 static int __devinit
1727 serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board)
1728 {
1729 const struct pci_device_id *blacklist;
1730 int num_iomem, num_port, first_port = -1, i;
1731
1732 /*
1733 * If it is not a communications device or the programming
1734 * interface is greater than 6, give up.
1735 *
1736 * (Should we try to make guesses for multiport serial devices
1737 * later?)
1738 */
1739 if ((((dev->class >> 8) != PCI_CLASS_COMMUNICATION_SERIAL) &&
1740 ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MODEM)) ||
1741 (dev->class & 0xff) > 6)
1742 return -ENODEV;
1743
1744 /*
1745 * Do not access blacklisted devices that are known not to
1746 * feature serial ports.
1747 */
1748 for (blacklist = softmodem_blacklist;
1749 blacklist < softmodem_blacklist + ARRAY_SIZE(softmodem_blacklist);
1750 blacklist++) {
1751 if (dev->vendor == blacklist->vendor &&
1752 dev->device == blacklist->device)
1753 return -ENODEV;
1754 }
1755
1756 num_iomem = num_port = 0;
1757 for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
1758 if (pci_resource_flags(dev, i) & IORESOURCE_IO) {
1759 num_port++;
1760 if (first_port == -1)
1761 first_port = i;
1762 }
1763 if (pci_resource_flags(dev, i) & IORESOURCE_MEM)
1764 num_iomem++;
1765 }
1766
1767 /*
1768 * If there is 1 or 0 iomem regions, and exactly one port,
1769 * use it. We guess the number of ports based on the IO
1770 * region size.
1771 */
1772 if (num_iomem <= 1 && num_port == 1) {
1773 board->flags = first_port;
1774 board->num_ports = pci_resource_len(dev, first_port) / 8;
1775 return 0;
1776 }
1777
1778 /*
1779 * Now guess if we've got a board which indexes by BARs.
1780 * Each IO BAR should be 8 bytes, and they should follow
1781 * consecutively.
1782 */
1783 first_port = -1;
1784 num_port = 0;
1785 for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
1786 if (pci_resource_flags(dev, i) & IORESOURCE_IO &&
1787 pci_resource_len(dev, i) == 8 &&
1788 (first_port == -1 || (first_port + num_port) == i)) {
1789 num_port++;
1790 if (first_port == -1)
1791 first_port = i;
1792 }
1793 }
1794
1795 if (num_port > 1) {
1796 board->flags = first_port | FL_BASE_BARS;
1797 board->num_ports = num_port;
1798 return 0;
1799 }
1800
1801 return -ENODEV;
1802 }
1803
1804 static inline int
1805 serial_pci_matches(struct pciserial_board *board,
1806 struct pciserial_board *guessed)
1807 {
1808 return
1809 board->num_ports == guessed->num_ports &&
1810 board->base_baud == guessed->base_baud &&
1811 board->uart_offset == guessed->uart_offset &&
1812 board->reg_shift == guessed->reg_shift &&
1813 board->first_offset == guessed->first_offset;
1814 }
1815
1816 struct serial_private *
1817 pciserial_init_ports(struct pci_dev *dev, struct pciserial_board *board)
1818 {
1819 struct uart_port serial_port;
1820 struct serial_private *priv;
1821 struct pci_serial_quirk *quirk;
1822 int rc, nr_ports, i;
1823
1824 nr_ports = board->num_ports;
1825
1826 /*
1827 * Find an init and setup quirks.
1828 */
1829 quirk = find_quirk(dev);
1830
1831 /*
1832 * Run the new-style initialization function.
1833 * The initialization function returns:
1834 * <0 - error
1835 * 0 - use board->num_ports
1836 * >0 - number of ports
1837 */
1838 if (quirk->init) {
1839 rc = quirk->init(dev);
1840 if (rc < 0) {
1841 priv = ERR_PTR(rc);
1842 goto err_out;
1843 }
1844 if (rc)
1845 nr_ports = rc;
1846 }
1847
1848 priv = kzalloc(sizeof(struct serial_private) +
1849 sizeof(unsigned int) * nr_ports,
1850 GFP_KERNEL);
1851 if (!priv) {
1852 priv = ERR_PTR(-ENOMEM);
1853 goto err_deinit;
1854 }
1855
1856 priv->dev = dev;
1857 priv->quirk = quirk;
1858
1859 memset(&serial_port, 0, sizeof(struct uart_port));
1860 serial_port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
1861 serial_port.uartclk = board->base_baud * 16;
1862 serial_port.irq = get_pci_irq(dev, board);
1863 serial_port.dev = &dev->dev;
1864
1865 for (i = 0; i < nr_ports; i++) {
1866 if (quirk->setup(priv, board, &serial_port, i))
1867 break;
1868
1869 #ifdef SERIAL_DEBUG_PCI
1870 printk(KERN_DEBUG "Setup PCI port: port %x, irq %d, type %d\n",
1871 serial_port.iobase, serial_port.irq, serial_port.iotype);
1872 #endif
1873
1874 priv->line[i] = serial8250_register_port(&serial_port);
1875 if (priv->line[i] < 0) {
1876 printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), priv->line[i]);
1877 break;
1878 }
1879 }
1880 priv->nr = i;
1881 return priv;
1882
1883 err_deinit:
1884 if (quirk->exit)
1885 quirk->exit(dev);
1886 err_out:
1887 return priv;
1888 }
1889 EXPORT_SYMBOL_GPL(pciserial_init_ports);
1890
1891 void pciserial_remove_ports(struct serial_private *priv)
1892 {
1893 struct pci_serial_quirk *quirk;
1894 int i;
1895
1896 for (i = 0; i < priv->nr; i++)
1897 serial8250_unregister_port(priv->line[i]);
1898
1899 for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
1900 if (priv->remapped_bar[i])
1901 iounmap(priv->remapped_bar[i]);
1902 priv->remapped_bar[i] = NULL;
1903 }
1904
1905 /*
1906 * Find the exit quirks.
1907 */
1908 quirk = find_quirk(priv->dev);
1909 if (quirk->exit)
1910 quirk->exit(priv->dev);
1911
1912 kfree(priv);
1913 }
1914 EXPORT_SYMBOL_GPL(pciserial_remove_ports);
1915
1916 void pciserial_suspend_ports(struct serial_private *priv)
1917 {
1918 int i;
1919
1920 for (i = 0; i < priv->nr; i++)
1921 if (priv->line[i] >= 0)
1922 serial8250_suspend_port(priv->line[i]);
1923 }
1924 EXPORT_SYMBOL_GPL(pciserial_suspend_ports);
1925
1926 void pciserial_resume_ports(struct serial_private *priv)
1927 {
1928 int i;
1929
1930 /*
1931 * Ensure that the board is correctly configured.
1932 */
1933 if (priv->quirk->init)
1934 priv->quirk->init(priv->dev);
1935
1936 for (i = 0; i < priv->nr; i++)
1937 if (priv->line[i] >= 0)
1938 serial8250_resume_port(priv->line[i]);
1939 }
1940 EXPORT_SYMBOL_GPL(pciserial_resume_ports);
1941
1942 /*
1943 * Probe one serial board. Unfortunately, there is no rhyme nor reason
1944 * to the arrangement of serial ports on a PCI card.
1945 */
1946 static int __devinit
1947 pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
1948 {
1949 struct serial_private *priv;
1950 struct pciserial_board *board, tmp;
1951 int rc;
1952
1953 if (ent->driver_data >= ARRAY_SIZE(pci_boards)) {
1954 printk(KERN_ERR "pci_init_one: invalid driver_data: %ld\n",
1955 ent->driver_data);
1956 return -EINVAL;
1957 }
1958
1959 board = &pci_boards[ent->driver_data];
1960
1961 rc = pci_enable_device(dev);
1962 if (rc)
1963 return rc;
1964
1965 if (ent->driver_data == pbn_default) {
1966 /*
1967 * Use a copy of the pci_board entry for this;
1968 * avoid changing entries in the table.
1969 */
1970 memcpy(&tmp, board, sizeof(struct pciserial_board));
1971 board = &tmp;
1972
1973 /*
1974 * We matched one of our class entries. Try to
1975 * determine the parameters of this board.
1976 */
1977 rc = serial_pci_guess_board(dev, board);
1978 if (rc)
1979 goto disable;
1980 } else {
1981 /*
1982 * We matched an explicit entry. If we are able to
1983 * detect this boards settings with our heuristic,
1984 * then we no longer need this entry.
1985 */
1986 memcpy(&tmp, &pci_boards[pbn_default],
1987 sizeof(struct pciserial_board));
1988 rc = serial_pci_guess_board(dev, &tmp);
1989 if (rc == 0 && serial_pci_matches(board, &tmp))
1990 moan_device("Redundant entry in serial pci_table.",
1991 dev);
1992 }
1993
1994 priv = pciserial_init_ports(dev, board);
1995 if (!IS_ERR(priv)) {
1996 pci_set_drvdata(dev, priv);
1997 return 0;
1998 }
1999
2000 rc = PTR_ERR(priv);
2001
2002 disable:
2003 pci_disable_device(dev);
2004 return rc;
2005 }
2006
2007 static void __devexit pciserial_remove_one(struct pci_dev *dev)
2008 {
2009 struct serial_private *priv = pci_get_drvdata(dev);
2010
2011 pci_set_drvdata(dev, NULL);
2012
2013 pciserial_remove_ports(priv);
2014
2015 pci_disable_device(dev);
2016 }
2017
2018 #ifdef CONFIG_PM
2019 static int pciserial_suspend_one(struct pci_dev *dev, pm_message_t state)
2020 {
2021 struct serial_private *priv = pci_get_drvdata(dev);
2022
2023 if (priv)
2024 pciserial_suspend_ports(priv);
2025
2026 pci_save_state(dev);
2027 pci_set_power_state(dev, pci_choose_state(dev, state));
2028 return 0;
2029 }
2030
2031 static int pciserial_resume_one(struct pci_dev *dev)
2032 {
2033 int err;
2034 struct serial_private *priv = pci_get_drvdata(dev);
2035
2036 pci_set_power_state(dev, PCI_D0);
2037 pci_restore_state(dev);
2038
2039 if (priv) {
2040 /*
2041 * The device may have been disabled. Re-enable it.
2042 */
2043 err = pci_enable_device(dev);
2044 if (err)
2045 return err;
2046
2047 pciserial_resume_ports(priv);
2048 }
2049 return 0;
2050 }
2051 #endif
2052
2053 static struct pci_device_id serial_pci_tbl[] = {
2054 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
2055 PCI_SUBVENDOR_ID_CONNECT_TECH,
2056 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0,
2057 pbn_b1_8_1382400 },
2058 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
2059 PCI_SUBVENDOR_ID_CONNECT_TECH,
2060 PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0,
2061 pbn_b1_4_1382400 },
2062 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
2063 PCI_SUBVENDOR_ID_CONNECT_TECH,
2064 PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0,
2065 pbn_b1_2_1382400 },
2066 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
2067 PCI_SUBVENDOR_ID_CONNECT_TECH,
2068 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0,
2069 pbn_b1_8_1382400 },
2070 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
2071 PCI_SUBVENDOR_ID_CONNECT_TECH,
2072 PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0,
2073 pbn_b1_4_1382400 },
2074 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
2075 PCI_SUBVENDOR_ID_CONNECT_TECH,
2076 PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0,
2077 pbn_b1_2_1382400 },
2078 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
2079 PCI_SUBVENDOR_ID_CONNECT_TECH,
2080 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485, 0, 0,
2081 pbn_b1_8_921600 },
2082 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
2083 PCI_SUBVENDOR_ID_CONNECT_TECH,
2084 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4, 0, 0,
2085 pbn_b1_8_921600 },
2086 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
2087 PCI_SUBVENDOR_ID_CONNECT_TECH,
2088 PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485, 0, 0,
2089 pbn_b1_4_921600 },
2090 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
2091 PCI_SUBVENDOR_ID_CONNECT_TECH,
2092 PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2, 0, 0,
2093 pbn_b1_4_921600 },
2094 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
2095 PCI_SUBVENDOR_ID_CONNECT_TECH,
2096 PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485, 0, 0,
2097 pbn_b1_2_921600 },
2098 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
2099 PCI_SUBVENDOR_ID_CONNECT_TECH,
2100 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6, 0, 0,
2101 pbn_b1_8_921600 },
2102 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
2103 PCI_SUBVENDOR_ID_CONNECT_TECH,
2104 PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1, 0, 0,
2105 pbn_b1_8_921600 },
2106 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
2107 PCI_SUBVENDOR_ID_CONNECT_TECH,
2108 PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1, 0, 0,
2109 pbn_b1_4_921600 },
2110 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
2111 PCI_SUBVENDOR_ID_CONNECT_TECH,
2112 PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_20MHZ, 0, 0,
2113 pbn_b1_2_1250000 },
2114 { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
2115 PCI_SUBVENDOR_ID_CONNECT_TECH,
2116 PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_2, 0, 0,
2117 pbn_b0_2_1843200 },
2118 { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
2119 PCI_SUBVENDOR_ID_CONNECT_TECH,
2120 PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_4, 0, 0,
2121 pbn_b0_4_1843200 },
2122 { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
2123 PCI_VENDOR_ID_AFAVLAB,
2124 PCI_SUBDEVICE_ID_AFAVLAB_P061, 0, 0,
2125 pbn_b0_4_1152000 },
2126 { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
2127 PCI_SUBVENDOR_ID_CONNECT_TECH,
2128 PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_232, 0, 0,
2129 pbn_b0_2_1843200_200 },
2130 { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154,
2131 PCI_SUBVENDOR_ID_CONNECT_TECH,
2132 PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_232, 0, 0,
2133 pbn_b0_4_1843200_200 },
2134 { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158,
2135 PCI_SUBVENDOR_ID_CONNECT_TECH,
2136 PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_232, 0, 0,
2137 pbn_b0_8_1843200_200 },
2138 { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
2139 PCI_SUBVENDOR_ID_CONNECT_TECH,
2140 PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_1_1, 0, 0,
2141 pbn_b0_2_1843200_200 },
2142 { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154,
2143 PCI_SUBVENDOR_ID_CONNECT_TECH,
2144 PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_2, 0, 0,
2145 pbn_b0_4_1843200_200 },
2146 { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158,
2147 PCI_SUBVENDOR_ID_CONNECT_TECH,
2148 PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_4, 0, 0,
2149 pbn_b0_8_1843200_200 },
2150 { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
2151 PCI_SUBVENDOR_ID_CONNECT_TECH,
2152 PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2, 0, 0,
2153 pbn_b0_2_1843200_200 },
2154 { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154,
2155 PCI_SUBVENDOR_ID_CONNECT_TECH,
2156 PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4, 0, 0,
2157 pbn_b0_4_1843200_200 },
2158 { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158,
2159 PCI_SUBVENDOR_ID_CONNECT_TECH,
2160 PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8, 0, 0,
2161 pbn_b0_8_1843200_200 },
2162 { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
2163 PCI_SUBVENDOR_ID_CONNECT_TECH,
2164 PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_485, 0, 0,
2165 pbn_b0_2_1843200_200 },
2166 { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154,
2167 PCI_SUBVENDOR_ID_CONNECT_TECH,
2168 PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_485, 0, 0,
2169 pbn_b0_4_1843200_200 },
2170 { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158,
2171 PCI_SUBVENDOR_ID_CONNECT_TECH,
2172 PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_485, 0, 0,
2173 pbn_b0_8_1843200_200 },
2174
2175 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530,
2176 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2177 pbn_b2_bt_1_115200 },
2178 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM2,
2179 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2180 pbn_b2_bt_2_115200 },
2181 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM422,
2182 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2183 pbn_b2_bt_4_115200 },
2184 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM232,
2185 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2186 pbn_b2_bt_2_115200 },
2187 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM4,
2188 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2189 pbn_b2_bt_4_115200 },
2190 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM8,
2191 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2192 pbn_b2_8_115200 },
2193 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM8,
2194 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2195 pbn_b2_8_115200 },
2196
2197 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_GTEK_SERIAL2,
2198 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2199 pbn_b2_bt_2_115200 },
2200 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM200,
2201 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2202 pbn_b2_bt_2_921600 },
2203 /*
2204 * VScom SPCOM800, from sl@s.pl
2205 */
2206 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM800,
2207 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2208 pbn_b2_8_921600 },
2209 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077,
2210 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2211 pbn_b2_4_921600 },
2212 /* Unknown card - subdevice 0x1584 */
2213 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
2214 PCI_VENDOR_ID_PLX,
2215 PCI_SUBDEVICE_ID_UNKNOWN_0x1584, 0, 0,
2216 pbn_b0_4_115200 },
2217 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
2218 PCI_SUBVENDOR_ID_KEYSPAN,
2219 PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0,
2220 pbn_panacom },
2221 { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_QUADMODEM,
2222 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2223 pbn_panacom4 },
2224 { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_DUALMODEM,
2225 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2226 pbn_panacom2 },
2227 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
2228 PCI_VENDOR_ID_ESDGMBH,
2229 PCI_DEVICE_ID_ESDGMBH_CPCIASIO4, 0, 0,
2230 pbn_b2_4_115200 },
2231 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
2232 PCI_SUBVENDOR_ID_CHASE_PCIFAST,
2233 PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0,
2234 pbn_b2_4_460800 },
2235 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
2236 PCI_SUBVENDOR_ID_CHASE_PCIFAST,
2237 PCI_SUBDEVICE_ID_CHASE_PCIFAST8, 0, 0,
2238 pbn_b2_8_460800 },
2239 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
2240 PCI_SUBVENDOR_ID_CHASE_PCIFAST,
2241 PCI_SUBDEVICE_ID_CHASE_PCIFAST16, 0, 0,
2242 pbn_b2_16_460800 },
2243 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
2244 PCI_SUBVENDOR_ID_CHASE_PCIFAST,
2245 PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC, 0, 0,
2246 pbn_b2_16_460800 },
2247 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
2248 PCI_SUBVENDOR_ID_CHASE_PCIRAS,
2249 PCI_SUBDEVICE_ID_CHASE_PCIRAS4, 0, 0,
2250 pbn_b2_4_460800 },
2251 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
2252 PCI_SUBVENDOR_ID_CHASE_PCIRAS,
2253 PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0,
2254 pbn_b2_8_460800 },
2255 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
2256 PCI_SUBVENDOR_ID_EXSYS,
2257 PCI_SUBDEVICE_ID_EXSYS_4055, 0, 0,
2258 pbn_exsys_4055 },
2259 /*
2260 * Megawolf Romulus PCI Serial Card, from Mike Hudson
2261 * (Exoray@isys.ca)
2262 */
2263 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_ROMULUS,
2264 0x10b5, 0x106a, 0, 0,
2265 pbn_plx_romulus },
2266 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC100,
2267 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2268 pbn_b1_4_115200 },
2269 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100,
2270 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2271 pbn_b1_2_115200 },
2272 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100D,
2273 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2274 pbn_b1_8_115200 },
2275 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100M,
2276 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2277 pbn_b1_8_115200 },
2278 { PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_OXSEMI_16PCI954,
2279 PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4,
2280 0, 0,
2281 pbn_b0_4_921600 },
2282 { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
2283 PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL,
2284 0, 0,
2285 pbn_b0_4_1152000 },
2286
2287 /*
2288 * The below card is a little controversial since it is the
2289 * subject of a PCI vendor/device ID clash. (See
2290 * www.ussg.iu.edu/hypermail/linux/kernel/0303.1/0516.html).
2291 * For now just used the hex ID 0x950a.
2292 */
2293 { PCI_VENDOR_ID_OXSEMI, 0x950a,
2294 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2295 pbn_b0_2_1130000 },
2296 { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
2297 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2298 pbn_b0_4_115200 },
2299 { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952,
2300 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2301 pbn_b0_bt_2_921600 },
2302
2303 /*
2304 * SBS Technologies, Inc. P-Octal and PMC-OCTPRO cards,
2305 * from skokodyn@yahoo.com
2306 */
2307 { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
2308 PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO232, 0, 0,
2309 pbn_sbsxrsio },
2310 { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
2311 PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO422, 0, 0,
2312 pbn_sbsxrsio },
2313 { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
2314 PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL232, 0, 0,
2315 pbn_sbsxrsio },
2316 { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
2317 PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL422, 0, 0,
2318 pbn_sbsxrsio },
2319
2320 /*
2321 * Digitan DS560-558, from jimd@esoft.com
2322 */
2323 { PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_ATT_VENUS_MODEM,
2324 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2325 pbn_b1_1_115200 },
2326
2327 /*
2328 * Titan Electronic cards
2329 * The 400L and 800L have a custom setup quirk.
2330 */
2331 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100,
2332 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2333 pbn_b0_1_921600 },
2334 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200,
2335 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2336 pbn_b0_2_921600 },
2337 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400,
2338 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2339 pbn_b0_4_921600 },
2340 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800B,
2341 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2342 pbn_b0_4_921600 },
2343 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100L,
2344 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2345 pbn_b1_1_921600 },
2346 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200L,
2347 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2348 pbn_b1_bt_2_921600 },
2349 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400L,
2350 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2351 pbn_b0_bt_4_921600 },
2352 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800L,
2353 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2354 pbn_b0_bt_8_921600 },
2355
2356 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_550,
2357 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2358 pbn_b2_1_460800 },
2359 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_650,
2360 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2361 pbn_b2_1_460800 },
2362 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_850,
2363 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2364 pbn_b2_1_460800 },
2365 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_550,
2366 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2367 pbn_b2_bt_2_921600 },
2368 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_650,
2369 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2370 pbn_b2_bt_2_921600 },
2371 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_850,
2372 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2373 pbn_b2_bt_2_921600 },
2374 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_550,
2375 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2376 pbn_b2_bt_4_921600 },
2377 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_650,
2378 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2379 pbn_b2_bt_4_921600 },
2380 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_850,
2381 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2382 pbn_b2_bt_4_921600 },
2383 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_550,
2384 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2385 pbn_b0_1_921600 },
2386 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_650,
2387 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2388 pbn_b0_1_921600 },
2389 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_850,
2390 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2391 pbn_b0_1_921600 },
2392 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_550,
2393 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2394 pbn_b0_bt_2_921600 },
2395 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_650,
2396 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2397 pbn_b0_bt_2_921600 },
2398 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_850,
2399 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2400 pbn_b0_bt_2_921600 },
2401 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_550,
2402 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2403 pbn_b0_bt_4_921600 },
2404 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_650,
2405 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2406 pbn_b0_bt_4_921600 },
2407 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_850,
2408 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2409 pbn_b0_bt_4_921600 },
2410 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_550,
2411 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2412 pbn_b0_bt_8_921600 },
2413 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_650,
2414 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2415 pbn_b0_bt_8_921600 },
2416 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_850,
2417 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2418 pbn_b0_bt_8_921600 },
2419
2420 /*
2421 * Computone devices submitted by Doug McNash dmcnash@computone.com
2422 */
2423 { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
2424 PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG4,
2425 0, 0, pbn_computone_4 },
2426 { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
2427 PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG8,
2428 0, 0, pbn_computone_8 },
2429 { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
2430 PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG6,
2431 0, 0, pbn_computone_6 },
2432
2433 { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI95N,
2434 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2435 pbn_oxsemi },
2436 { PCI_VENDOR_ID_TIMEDIA, PCI_DEVICE_ID_TIMEDIA_1889,
2437 PCI_VENDOR_ID_TIMEDIA, PCI_ANY_ID, 0, 0,
2438 pbn_b0_bt_1_921600 },
2439
2440 /*
2441 * AFAVLAB serial card, from Harald Welte <laforge@gnumonks.org>
2442 */
2443 { PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P028,
2444 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2445 pbn_b0_bt_8_115200 },
2446 { PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P030,
2447 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2448 pbn_b0_bt_8_115200 },
2449
2450 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DSERIAL,
2451 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2452 pbn_b0_bt_2_115200 },
2453 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_A,
2454 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2455 pbn_b0_bt_2_115200 },
2456 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B,
2457 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2458 pbn_b0_bt_2_115200 },
2459 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_A,
2460 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2461 pbn_b0_bt_4_460800 },
2462 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_B,
2463 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2464 pbn_b0_bt_4_460800 },
2465 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_PLUS,
2466 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2467 pbn_b0_bt_2_460800 },
2468 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_A,
2469 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2470 pbn_b0_bt_2_460800 },
2471 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_B,
2472 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2473 pbn_b0_bt_2_460800 },
2474 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_SSERIAL,
2475 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2476 pbn_b0_bt_1_115200 },
2477 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_650,
2478 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2479 pbn_b0_bt_1_460800 },
2480
2481 /*
2482 * Korenix Jetcard F0/F1 cards (JC1204, JC1208, JC1404, JC1408).
2483 * Cards are identified by their subsystem vendor IDs, which
2484 * (in hex) match the model number.
2485 *
2486 * Note that JC140x are RS422/485 cards which require ox950
2487 * ACR = 0x10, and as such are not currently fully supported.
2488 */
2489 { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0,
2490 0x1204, 0x0004, 0, 0,
2491 pbn_b0_4_921600 },
2492 { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0,
2493 0x1208, 0x0004, 0, 0,
2494 pbn_b0_4_921600 },
2495 /* { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0,
2496 0x1402, 0x0002, 0, 0,
2497 pbn_b0_2_921600 }, */
2498 /* { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0,
2499 0x1404, 0x0004, 0, 0,
2500 pbn_b0_4_921600 }, */
2501 { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF1,
2502 0x1208, 0x0004, 0, 0,
2503 pbn_b0_4_921600 },
2504
2505 /*
2506 * Dell Remote Access Card 4 - Tim_T_Murphy@Dell.com
2507 */
2508 { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RAC4,
2509 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2510 pbn_b1_1_1382400 },
2511
2512 /*
2513 * Dell Remote Access Card III - Tim_T_Murphy@Dell.com
2514 */
2515 { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RACIII,
2516 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2517 pbn_b1_1_1382400 },
2518
2519 /*
2520 * RAStel 2 port modem, gerg@moreton.com.au
2521 */
2522 { PCI_VENDOR_ID_MORETON, PCI_DEVICE_ID_RASTEL_2PORT,
2523 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2524 pbn_b2_bt_2_115200 },
2525
2526 /*
2527 * EKF addition for i960 Boards form EKF with serial port
2528 */
2529 { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80960_RP,
2530 0xE4BF, PCI_ANY_ID, 0, 0,
2531 pbn_intel_i960 },
2532
2533 /*
2534 * Xircom Cardbus/Ethernet combos
2535 */
2536 { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_X3201_MDM,
2537 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2538 pbn_b0_1_115200 },
2539 /*
2540 * Xircom RBM56G cardbus modem - Dirk Arnold (temp entry)
2541 */
2542 { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_RBM56G,
2543 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2544 pbn_b0_1_115200 },
2545
2546 /*
2547 * Untested PCI modems, sent in from various folks...
2548 */
2549
2550 /*
2551 * Elsa Model 56K PCI Modem, from Andreas Rath <arh@01019freenet.de>
2552 */
2553 { PCI_VENDOR_ID_ROCKWELL, 0x1004,
2554 0x1048, 0x1500, 0, 0,
2555 pbn_b1_1_115200 },
2556
2557 { PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
2558 0xFF00, 0, 0, 0,
2559 pbn_sgi_ioc3 },
2560
2561 /*
2562 * HP Diva card
2563 */
2564 { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA,
2565 PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_RMP3, 0, 0,
2566 pbn_b1_1_115200 },
2567 { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA,
2568 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2569 pbn_b0_5_115200 },
2570 { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_AUX,
2571 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2572 pbn_b2_1_115200 },
2573
2574 { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM2,
2575 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2576 pbn_b3_2_115200 },
2577 { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM4,
2578 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2579 pbn_b3_4_115200 },
2580 { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM8,
2581 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2582 pbn_b3_8_115200 },
2583
2584 /*
2585 * Exar Corp. XR17C15[248] Dual/Quad/Octal UART
2586 */
2587 { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
2588 PCI_ANY_ID, PCI_ANY_ID,
2589 0,
2590 0, pbn_exar_XR17C152 },
2591 { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154,
2592 PCI_ANY_ID, PCI_ANY_ID,
2593 0,
2594 0, pbn_exar_XR17C154 },
2595 { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158,
2596 PCI_ANY_ID, PCI_ANY_ID,
2597 0,
2598 0, pbn_exar_XR17C158 },
2599
2600 /*
2601 * Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke)
2602 */
2603 { PCI_VENDOR_ID_TOPIC, PCI_DEVICE_ID_TOPIC_TP560,
2604 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2605 pbn_b0_1_115200 },
2606 /*
2607 * ITE
2608 */
2609 { PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8872,
2610 PCI_ANY_ID, PCI_ANY_ID,
2611 0, 0,
2612 pbn_b1_bt_1_115200 },
2613
2614 /*
2615 * IntaShield IS-200
2616 */
2617 { PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS200,
2618 PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0811 */
2619 pbn_b2_2_115200 },
2620 /*
2621 * IntaShield IS-400
2622 */
2623 { PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS400,
2624 PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0dc0 */
2625 pbn_b2_4_115200 },
2626 /*
2627 * Perle PCI-RAS cards
2628 */
2629 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
2630 PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS4,
2631 0, 0, pbn_b2_4_921600 },
2632 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
2633 PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS8,
2634 0, 0, pbn_b2_8_921600 },
2635
2636 /*
2637 * Mainpine series cards: Fairly standard layout but fools
2638 * parts of the autodetect in some cases and uses otherwise
2639 * unmatched communications subclasses in the PCI Express case
2640 */
2641
2642 { /* RockForceDUO */
2643 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2644 PCI_VENDOR_ID_MAINPINE, 0x0200,
2645 0, 0, pbn_b0_2_115200 },
2646 { /* RockForceQUATRO */
2647 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2648 PCI_VENDOR_ID_MAINPINE, 0x0300,
2649 0, 0, pbn_b0_4_115200 },
2650 { /* RockForceDUO+ */
2651 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2652 PCI_VENDOR_ID_MAINPINE, 0x0400,
2653 0, 0, pbn_b0_2_115200 },
2654 { /* RockForceQUATRO+ */
2655 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2656 PCI_VENDOR_ID_MAINPINE, 0x0500,
2657 0, 0, pbn_b0_4_115200 },
2658 { /* RockForce+ */
2659 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2660 PCI_VENDOR_ID_MAINPINE, 0x0600,
2661 0, 0, pbn_b0_2_115200 },
2662 { /* RockForce+ */
2663 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2664 PCI_VENDOR_ID_MAINPINE, 0x0700,
2665 0, 0, pbn_b0_4_115200 },
2666 { /* RockForceOCTO+ */
2667 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2668 PCI_VENDOR_ID_MAINPINE, 0x0800,
2669 0, 0, pbn_b0_8_115200 },
2670 { /* RockForceDUO+ */
2671 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2672 PCI_VENDOR_ID_MAINPINE, 0x0C00,
2673 0, 0, pbn_b0_2_115200 },
2674 { /* RockForceQUARTRO+ */
2675 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2676 PCI_VENDOR_ID_MAINPINE, 0x0D00,
2677 0, 0, pbn_b0_4_115200 },
2678 { /* RockForceOCTO+ */
2679 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2680 PCI_VENDOR_ID_MAINPINE, 0x1D00,
2681 0, 0, pbn_b0_8_115200 },
2682 { /* RockForceD1 */
2683 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2684 PCI_VENDOR_ID_MAINPINE, 0x2000,
2685 0, 0, pbn_b0_1_115200 },
2686 { /* RockForceF1 */
2687 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2688 PCI_VENDOR_ID_MAINPINE, 0x2100,
2689 0, 0, pbn_b0_1_115200 },
2690 { /* RockForceD2 */
2691 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2692 PCI_VENDOR_ID_MAINPINE, 0x2200,
2693 0, 0, pbn_b0_2_115200 },
2694 { /* RockForceF2 */
2695 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2696 PCI_VENDOR_ID_MAINPINE, 0x2300,
2697 0, 0, pbn_b0_2_115200 },
2698 { /* RockForceD4 */
2699 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2700 PCI_VENDOR_ID_MAINPINE, 0x2400,
2701 0, 0, pbn_b0_4_115200 },
2702 { /* RockForceF4 */
2703 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2704 PCI_VENDOR_ID_MAINPINE, 0x2500,
2705 0, 0, pbn_b0_4_115200 },
2706 { /* RockForceD8 */
2707 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2708 PCI_VENDOR_ID_MAINPINE, 0x2600,
2709 0, 0, pbn_b0_8_115200 },
2710 { /* RockForceF8 */
2711 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2712 PCI_VENDOR_ID_MAINPINE, 0x2700,
2713 0, 0, pbn_b0_8_115200 },
2714 { /* IQ Express D1 */
2715 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2716 PCI_VENDOR_ID_MAINPINE, 0x3000,
2717 0, 0, pbn_b0_1_115200 },
2718 { /* IQ Express F1 */
2719 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2720 PCI_VENDOR_ID_MAINPINE, 0x3100,
2721 0, 0, pbn_b0_1_115200 },
2722 { /* IQ Express D2 */
2723 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2724 PCI_VENDOR_ID_MAINPINE, 0x3200,
2725 0, 0, pbn_b0_2_115200 },
2726 { /* IQ Express F2 */
2727 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2728 PCI_VENDOR_ID_MAINPINE, 0x3300,
2729 0, 0, pbn_b0_2_115200 },
2730 { /* IQ Express D4 */
2731 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2732 PCI_VENDOR_ID_MAINPINE, 0x3400,
2733 0, 0, pbn_b0_4_115200 },
2734 { /* IQ Express F4 */
2735 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2736 PCI_VENDOR_ID_MAINPINE, 0x3500,
2737 0, 0, pbn_b0_4_115200 },
2738 { /* IQ Express D8 */
2739 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2740 PCI_VENDOR_ID_MAINPINE, 0x3C00,
2741 0, 0, pbn_b0_8_115200 },
2742 { /* IQ Express F8 */
2743 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2744 PCI_VENDOR_ID_MAINPINE, 0x3D00,
2745 0, 0, pbn_b0_8_115200 },
2746
2747
2748 /*
2749 * PA Semi PA6T-1682M on-chip UART
2750 */
2751 { PCI_VENDOR_ID_PASEMI, 0xa004,
2752 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2753 pbn_pasemi_1682M },
2754
2755 /*
2756 * ADDI-DATA GmbH communication cards <info@addi-data.com>
2757 */
2758 { PCI_VENDOR_ID_ADDIDATA,
2759 PCI_DEVICE_ID_ADDIDATA_APCI7500,
2760 PCI_ANY_ID,
2761 PCI_ANY_ID,
2762 0,
2763 0,
2764 pbn_b0_4_115200 },
2765
2766 { PCI_VENDOR_ID_ADDIDATA,
2767 PCI_DEVICE_ID_ADDIDATA_APCI7420,
2768 PCI_ANY_ID,
2769 PCI_ANY_ID,
2770 0,
2771 0,
2772 pbn_b0_2_115200 },
2773
2774 { PCI_VENDOR_ID_ADDIDATA,
2775 PCI_DEVICE_ID_ADDIDATA_APCI7300,
2776 PCI_ANY_ID,
2777 PCI_ANY_ID,
2778 0,
2779 0,
2780 pbn_b0_1_115200 },
2781
2782 { PCI_VENDOR_ID_ADDIDATA_OLD,
2783 PCI_DEVICE_ID_ADDIDATA_APCI7800,
2784 PCI_ANY_ID,
2785 PCI_ANY_ID,
2786 0,
2787 0,
2788 pbn_b1_8_115200 },
2789
2790 { PCI_VENDOR_ID_ADDIDATA,
2791 PCI_DEVICE_ID_ADDIDATA_APCI7500_2,
2792 PCI_ANY_ID,
2793 PCI_ANY_ID,
2794 0,
2795 0,
2796 pbn_b0_4_115200 },
2797
2798 { PCI_VENDOR_ID_ADDIDATA,
2799 PCI_DEVICE_ID_ADDIDATA_APCI7420_2,
2800 PCI_ANY_ID,
2801 PCI_ANY_ID,
2802 0,
2803 0,
2804 pbn_b0_2_115200 },
2805
2806 { PCI_VENDOR_ID_ADDIDATA,
2807 PCI_DEVICE_ID_ADDIDATA_APCI7300_2,
2808 PCI_ANY_ID,
2809 PCI_ANY_ID,
2810 0,
2811 0,
2812 pbn_b0_1_115200 },
2813
2814 { PCI_VENDOR_ID_ADDIDATA,
2815 PCI_DEVICE_ID_ADDIDATA_APCI7500_3,
2816 PCI_ANY_ID,
2817 PCI_ANY_ID,
2818 0,
2819 0,
2820 pbn_b0_4_115200 },
2821
2822 { PCI_VENDOR_ID_ADDIDATA,
2823 PCI_DEVICE_ID_ADDIDATA_APCI7420_3,
2824 PCI_ANY_ID,
2825 PCI_ANY_ID,
2826 0,
2827 0,
2828 pbn_b0_2_115200 },
2829
2830 { PCI_VENDOR_ID_ADDIDATA,
2831 PCI_DEVICE_ID_ADDIDATA_APCI7300_3,
2832 PCI_ANY_ID,
2833 PCI_ANY_ID,
2834 0,
2835 0,
2836 pbn_b0_1_115200 },
2837
2838 { PCI_VENDOR_ID_ADDIDATA,
2839 PCI_DEVICE_ID_ADDIDATA_APCI7800_3,
2840 PCI_ANY_ID,
2841 PCI_ANY_ID,
2842 0,
2843 0,
2844 pbn_b0_8_115200 },
2845
2846 /*
2847 * These entries match devices with class COMMUNICATION_SERIAL,
2848 * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
2849 */
2850 { PCI_ANY_ID, PCI_ANY_ID,
2851 PCI_ANY_ID, PCI_ANY_ID,
2852 PCI_CLASS_COMMUNICATION_SERIAL << 8,
2853 0xffff00, pbn_default },
2854 { PCI_ANY_ID, PCI_ANY_ID,
2855 PCI_ANY_ID, PCI_ANY_ID,
2856 PCI_CLASS_COMMUNICATION_MODEM << 8,
2857 0xffff00, pbn_default },
2858 { PCI_ANY_ID, PCI_ANY_ID,
2859 PCI_ANY_ID, PCI_ANY_ID,
2860 PCI_CLASS_COMMUNICATION_MULTISERIAL << 8,
2861 0xffff00, pbn_default },
2862 { 0, }
2863 };
2864
2865 static struct pci_driver serial_pci_driver = {
2866 .name = "serial",
2867 .probe = pciserial_init_one,
2868 .remove = __devexit_p(pciserial_remove_one),
2869 #ifdef CONFIG_PM
2870 .suspend = pciserial_suspend_one,
2871 .resume = pciserial_resume_one,
2872 #endif
2873 .id_table = serial_pci_tbl,
2874 };
2875
2876 static int __init serial8250_pci_init(void)
2877 {
2878 return pci_register_driver(&serial_pci_driver);
2879 }
2880
2881 static void __exit serial8250_pci_exit(void)
2882 {
2883 pci_unregister_driver(&serial_pci_driver);
2884 }
2885
2886 module_init(serial8250_pci_init);
2887 module_exit(serial8250_pci_exit);
2888
2889 MODULE_LICENSE("GPL");
2890 MODULE_DESCRIPTION("Generic 8250/16x50 PCI serial probe module");
2891 MODULE_DEVICE_TABLE(pci, serial_pci_tbl);
SocketAccessConTroL development