x86: move pic_mode to apic_32.c
[linux-2.6/sactl.git] / arch / x86 / kernel / smp.c
blob0cb7aadc87cd44a5e0c2402731cadbfd8c88ce8d
1 /*
2 * Intel SMP support routines.
4 * (c) 1995 Alan Cox, Building #3 <alan@redhat.com>
5 * (c) 1998-99, 2000 Ingo Molnar <mingo@redhat.com>
6 * (c) 2002,2003 Andi Kleen, SuSE Labs.
8 * i386 and x86_64 integration by Glauber Costa <gcosta@redhat.com>
10 * This code is released under the GNU General Public License version 2 or
11 * later.
14 #include <linux/init.h>
16 #include <linux/mm.h>
17 #include <linux/delay.h>
18 #include <linux/spinlock.h>
19 #include <linux/kernel_stat.h>
20 #include <linux/mc146818rtc.h>
21 #include <linux/cache.h>
22 #include <linux/interrupt.h>
23 #include <linux/cpu.h>
25 #include <asm/mtrr.h>
26 #include <asm/tlbflush.h>
27 #include <asm/mmu_context.h>
28 #include <asm/proto.h>
29 #include <mach_ipi.h>
30 #include <mach_apic.h>
32 * Some notes on x86 processor bugs affecting SMP operation:
34 * Pentium, Pentium Pro, II, III (and all CPUs) have bugs.
35 * The Linux implications for SMP are handled as follows:
37 * Pentium III / [Xeon]
38 * None of the E1AP-E3AP errata are visible to the user.
40 * E1AP. see PII A1AP
41 * E2AP. see PII A2AP
42 * E3AP. see PII A3AP
44 * Pentium II / [Xeon]
45 * None of the A1AP-A3AP errata are visible to the user.
47 * A1AP. see PPro 1AP
48 * A2AP. see PPro 2AP
49 * A3AP. see PPro 7AP
51 * Pentium Pro
52 * None of 1AP-9AP errata are visible to the normal user,
53 * except occasional delivery of 'spurious interrupt' as trap #15.
54 * This is very rare and a non-problem.
56 * 1AP. Linux maps APIC as non-cacheable
57 * 2AP. worked around in hardware
58 * 3AP. fixed in C0 and above steppings microcode update.
59 * Linux does not use excessive STARTUP_IPIs.
60 * 4AP. worked around in hardware
61 * 5AP. symmetric IO mode (normal Linux operation) not affected.
62 * 'noapic' mode has vector 0xf filled out properly.
63 * 6AP. 'noapic' mode might be affected - fixed in later steppings
64 * 7AP. We do not assume writes to the LVT deassering IRQs
65 * 8AP. We do not enable low power mode (deep sleep) during MP bootup
66 * 9AP. We do not use mixed mode
68 * Pentium
69 * There is a marginal case where REP MOVS on 100MHz SMP
70 * machines with B stepping processors can fail. XXX should provide
71 * an L1cache=Writethrough or L1cache=off option.
73 * B stepping CPUs may hang. There are hardware work arounds
74 * for this. We warn about it in case your board doesn't have the work
75 * arounds. Basically that's so I can tell anyone with a B stepping
76 * CPU and SMP problems "tough".
78 * Specific items [From Pentium Processor Specification Update]
80 * 1AP. Linux doesn't use remote read
81 * 2AP. Linux doesn't trust APIC errors
82 * 3AP. We work around this
83 * 4AP. Linux never generated 3 interrupts of the same priority
84 * to cause a lost local interrupt.
85 * 5AP. Remote read is never used
86 * 6AP. not affected - worked around in hardware
87 * 7AP. not affected - worked around in hardware
88 * 8AP. worked around in hardware - we get explicit CS errors if not
89 * 9AP. only 'noapic' mode affected. Might generate spurious
90 * interrupts, we log only the first one and count the
91 * rest silently.
92 * 10AP. not affected - worked around in hardware
93 * 11AP. Linux reads the APIC between writes to avoid this, as per
94 * the documentation. Make sure you preserve this as it affects
95 * the C stepping chips too.
96 * 12AP. not affected - worked around in hardware
97 * 13AP. not affected - worked around in hardware
98 * 14AP. we always deassert INIT during bootup
99 * 15AP. not affected - worked around in hardware
100 * 16AP. not affected - worked around in hardware
101 * 17AP. not affected - worked around in hardware
102 * 18AP. not affected - worked around in hardware
103 * 19AP. not affected - worked around in BIOS
105 * If this sounds worrying believe me these bugs are either ___RARE___,
106 * or are signal timing bugs worked around in hardware and there's
107 * about nothing of note with C stepping upwards.
111 * this function sends a 'reschedule' IPI to another CPU.
112 * it goes straight through and wastes no time serializing
113 * anything. Worst case is that we lose a reschedule ...
115 static void native_smp_send_reschedule(int cpu)
117 if (unlikely(cpu_is_offline(cpu))) {
118 WARN_ON(1);
119 return;
121 send_IPI_mask(cpumask_of_cpu(cpu), RESCHEDULE_VECTOR);
125 * Structure and data for smp_call_function(). This is designed to minimise
126 * static memory requirements. It also looks cleaner.
128 static DEFINE_SPINLOCK(call_lock);
130 struct call_data_struct {
131 void (*func) (void *info);
132 void *info;
133 atomic_t started;
134 atomic_t finished;
135 int wait;
138 void lock_ipi_call_lock(void)
140 spin_lock_irq(&call_lock);
143 void unlock_ipi_call_lock(void)
145 spin_unlock_irq(&call_lock);
148 static struct call_data_struct *call_data;
150 static void __smp_call_function(void (*func) (void *info), void *info,
151 int nonatomic, int wait)
153 struct call_data_struct data;
154 int cpus = num_online_cpus() - 1;
156 if (!cpus)
157 return;
159 data.func = func;
160 data.info = info;
161 atomic_set(&data.started, 0);
162 data.wait = wait;
163 if (wait)
164 atomic_set(&data.finished, 0);
166 call_data = &data;
167 mb();
169 /* Send a message to all other CPUs and wait for them to respond */
170 send_IPI_allbutself(CALL_FUNCTION_VECTOR);
172 /* Wait for response */
173 while (atomic_read(&data.started) != cpus)
174 cpu_relax();
176 if (wait)
177 while (atomic_read(&data.finished) != cpus)
178 cpu_relax();
183 * smp_call_function_mask(): Run a function on a set of other CPUs.
184 * @mask: The set of cpus to run on. Must not include the current cpu.
185 * @func: The function to run. This must be fast and non-blocking.
186 * @info: An arbitrary pointer to pass to the function.
187 * @wait: If true, wait (atomically) until function has completed on other CPUs.
189 * Returns 0 on success, else a negative status code.
191 * If @wait is true, then returns once @func has returned; otherwise
192 * it returns just before the target cpu calls @func.
194 * You must not call this function with disabled interrupts or from a
195 * hardware interrupt handler or from a bottom half handler.
197 static int
198 native_smp_call_function_mask(cpumask_t mask,
199 void (*func)(void *), void *info,
200 int wait)
202 struct call_data_struct data;
203 cpumask_t allbutself;
204 int cpus;
206 /* Can deadlock when called with interrupts disabled */
207 WARN_ON(irqs_disabled());
209 /* Holding any lock stops cpus from going down. */
210 spin_lock(&call_lock);
212 allbutself = cpu_online_map;
213 cpu_clear(smp_processor_id(), allbutself);
215 cpus_and(mask, mask, allbutself);
216 cpus = cpus_weight(mask);
218 if (!cpus) {
219 spin_unlock(&call_lock);
220 return 0;
223 data.func = func;
224 data.info = info;
225 atomic_set(&data.started, 0);
226 data.wait = wait;
227 if (wait)
228 atomic_set(&data.finished, 0);
230 call_data = &data;
231 wmb();
233 /* Send a message to other CPUs */
234 if (cpus_equal(mask, allbutself) &&
235 cpus_equal(cpu_online_map, cpu_callout_map))
236 send_IPI_allbutself(CALL_FUNCTION_VECTOR);
237 else
238 send_IPI_mask(mask, CALL_FUNCTION_VECTOR);
240 /* Wait for response */
241 while (atomic_read(&data.started) != cpus)
242 cpu_relax();
244 if (wait)
245 while (atomic_read(&data.finished) != cpus)
246 cpu_relax();
247 spin_unlock(&call_lock);
249 return 0;
252 static void stop_this_cpu(void *dummy)
254 local_irq_disable();
256 * Remove this CPU:
258 cpu_clear(smp_processor_id(), cpu_online_map);
259 disable_local_APIC();
260 if (hlt_works(smp_processor_id()))
261 for (;;) halt();
262 for (;;);
266 * this function calls the 'stop' function on all other CPUs in the system.
269 static void native_smp_send_stop(void)
271 int nolock;
272 unsigned long flags;
274 if (reboot_force)
275 return;
277 /* Don't deadlock on the call lock in panic */
278 nolock = !spin_trylock(&call_lock);
279 local_irq_save(flags);
280 __smp_call_function(stop_this_cpu, NULL, 0, 0);
281 if (!nolock)
282 spin_unlock(&call_lock);
283 disable_local_APIC();
284 local_irq_restore(flags);
288 * Reschedule call back. Nothing to do,
289 * all the work is done automatically when
290 * we return from the interrupt.
292 void smp_reschedule_interrupt(struct pt_regs *regs)
294 ack_APIC_irq();
295 #ifdef CONFIG_X86_32
296 __get_cpu_var(irq_stat).irq_resched_count++;
297 #else
298 add_pda(irq_resched_count, 1);
299 #endif
302 void smp_call_function_interrupt(struct pt_regs *regs)
304 void (*func) (void *info) = call_data->func;
305 void *info = call_data->info;
306 int wait = call_data->wait;
308 ack_APIC_irq();
310 * Notify initiating CPU that I've grabbed the data and am
311 * about to execute the function
313 mb();
314 atomic_inc(&call_data->started);
316 * At this point the info structure may be out of scope unless wait==1
318 irq_enter();
319 (*func)(info);
320 #ifdef CONFIG_X86_32
321 __get_cpu_var(irq_stat).irq_call_count++;
322 #else
323 add_pda(irq_call_count, 1);
324 #endif
325 irq_exit();
327 if (wait) {
328 mb();
329 atomic_inc(&call_data->finished);
333 struct smp_ops smp_ops = {
334 .smp_prepare_boot_cpu = native_smp_prepare_boot_cpu,
335 .smp_prepare_cpus = native_smp_prepare_cpus,
336 .cpu_up = native_cpu_up,
337 .smp_cpus_done = native_smp_cpus_done,
339 .smp_send_stop = native_smp_send_stop,
340 .smp_send_reschedule = native_smp_send_reschedule,
341 .smp_call_function_mask = native_smp_call_function_mask,
343 EXPORT_SYMBOL_GPL(smp_ops);