?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
[PATCH] hostap: Remove experimental PCI bus master/DMA code
[linux-2.6/sactl.git] / sound / oss / aedsp16.c
blobb556263a57f5513fa44bb87dbdbfbad37a04d80e
1 /*
2 sound/oss/aedsp16.c
3
4 Audio Excel DSP 16 software configuration routines
5 Copyright (C) 1995,1996,1997,1998 Riccardo Facchetti (fizban@tin.it)
6
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 2 of the License, or
10 (at your option) any later version.
11
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
16
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20
21 */
22 /*
23 * Include the main OSS Lite header file. It include all the os, OSS Lite, etc
24 * headers needed by this source.
25 */
26 #include <linux/config.h>
27 #include <linux/delay.h>
28 #include <linux/module.h>
29 #include <linux/init.h>
30 #include "sound_config.h"
31
32 /*
33 * Sanity checks
34 */
35
36 #if defined(CONFIG_SOUND_AEDSP16_SBPRO) && defined(CONFIG_SOUND_AEDSP16_MSS)
37 #error You have to enable only one of the MSS and SBPRO emulations.
38 #endif
39
40 /*
41
42 READ THIS
43
44 This module started to configure the Audio Excel DSP 16 Sound Card.
45 Now works with the SC-6000 (old aedsp16) and new SC-6600 based cards.
46
47 NOTE: I have NO idea about Audio Excel DSP 16 III. If someone owns this
48 audio card and want to see the kernel support for it, please contact me.
49
50 Audio Excel DSP 16 is an SB pro II, Microsoft Sound System and MPU-401
51 compatible card.
52 It is software-only configurable (no jumpers to hard-set irq/dma/mpu-irq),
53 so before this module, the only way to configure the DSP under linux was
54 boot the MS-DOS loading the sound.sys device driver (this driver soft-
55 configure the sound board hardware by massaging someone of its registers),
56 and then ctrl-alt-del to boot linux with the DSP configured by the DOS
57 driver.
58
59 This module works configuring your Audio Excel DSP 16's irq, dma and
60 mpu-401-irq. The OSS Lite routines rely on the fact that if the
61 hardware is there, they can detect it. The problem with AEDSP16 is
62 that no hardware can be found by the probe routines if the sound card
63 is not configured properly. Sometimes the kernel probe routines can find
64 an SBPRO even when the card is not configured (this is the standard setup
65 of the card), but the SBPRO emulation don't work well if the card is not
66 properly initialized. For this reason
67
68 aedsp16_init_board()
69
70 routine is called before the OSS Lite probe routines try to detect the
71 hardware.
72
73 NOTE (READ THE NOTE TOO, IT CONTAIN USEFUL INFORMATIONS)
74
75 NOTE: Now it works with SC-6000 and SC-6600 based audio cards. The new cards
76 have no jumper switch at all. No more WSS or MPU-401 I/O port switches. They
77 have to be configured by software.
78
79 NOTE: The driver is merged with the new OSS Lite sound driver. It works
80 as a lowlevel driver.
81
82 The Audio Excel DSP 16 Sound Card emulates both SBPRO and MSS;
83 the OSS Lite sound driver can be configured for SBPRO and MSS cards
84 at the same time, but the aedsp16 can't be two cards!!
85 When we configure it, we have to choose the SBPRO or the MSS emulation
86 for AEDSP16. We also can install a *REAL* card of the other type (see [1]).
87
88 NOTE: If someone can test the combination AEDSP16+MSS or AEDSP16+SBPRO
89 please let me know if it works.
90
91 The MPU-401 support can be compiled in together with one of the other
92 two operating modes.
93
94 NOTE: This is something like plug-and-play: we have only to plug
95 the AEDSP16 board in the socket, and then configure and compile
96 a kernel that uses the AEDSP16 software configuration capability.
97 No jumper setting is needed!
98
99 For example, if you want AEDSP16 to be an SBPro, on irq 10, dma 3
100 you have just to make config the OSS Lite package, configuring
101 the AEDSP16 sound card, then activating the SBPro emulation mode
102 and at last configuring IRQ and DMA.
103 Compile the kernel and run it.
104
105 NOTE: This means for SC-6000 cards that you can choose irq and dma,
106 but not the I/O addresses. To change I/O addresses you have to set
107 them with jumpers. For SC-6600 cards you have no jumpers so you have
108 to set up your full card configuration in the make config.
109
110 You can change the irq/dma/mirq settings WITHOUT THE NEED to open
111 your computer and massage the jumpers (there are no irq/dma/mirq
112 jumpers to be configured anyway, only I/O BASE values have to be
113 configured with jumpers)
114
115 For some ununderstandable reason, the card default of irq 7, dma 1,
116 don't work for me. Seems to be an IRQ or DMA conflict. Under heavy
117 HDD work, the kernel start to erupt out a lot of messages like:
118
119 'Sound: DMA timed out - IRQ/DRQ config error?'
120
121 For what I can say, I have NOT any conflict at irq 7 (under linux I'm
122 using the lp polling driver), and dma line 1 is unused as stated by
123 /proc/dma. I can suppose this is a bug of AEDSP16. I know my hardware so
124 I'm pretty sure I have not any conflict, but may be I'm wrong. Who knows!
125 Anyway a setting of irq 10, dma 3 works really fine.
126
127 NOTE: if someone can use AEDSP16 with irq 7, dma 1, please let me know
128 the emulation mode, all the installed hardware and the hardware
129 configuration (irq and dma settings of all the hardware).
130
131 This init module should work with SBPRO+MSS, when one of the two is
132 the AEDSP16 emulation and the other the real card. (see [1])
133 For example:
134
135 AEDSP16 (0x220) in SBPRO emu (0x220) + real MSS + other
136 AEDSP16 (0x220) in MSS emu + real SBPRO (0x240) + other
137
138 MPU401 should work. (see [2])
139
140 [1]
141 ---
142 Date: Mon, 29 Jul 1997 08:35:40 +0100
143 From: Mr S J Greenaway <sjg95@unixfe.rl.ac.uk>
144
145 [...]
146 Just to let you know got my Audio Excel (emulating a MSS) working
147 with my original SB16, thanks for the driver!
148 [...]
149 ---
150
151 [2] Not tested by me for lack of hardware.
152
153 TODO, WISHES AND TECH
154
155 - About I/O ports allocation -
156
157 Request the 2x0h region (port base) in any case if we are using this card.
158
159 NOTE: the "aedsp16 (base)" string with which we are requesting the aedsp16
160 port base region (see code) does not mean necessarily that we are emulating
161 sbpro. Even if this region is the sbpro I/O ports region, we use this
162 region to access the control registers of the card, and if emulating
163 sbpro, I/O sbpro registers too. If we are emulating MSS, the sbpro
164 registers are not used, in no way, to emulate an sbpro: they are
165 used only for configuration purposes.
166
167 Started Fri Mar 17 16:13:18 MET 1995
168
169 v0.1 (ALPHA, was an user-level program called AudioExcelDSP16.c)
170 - Initial code.
171 v0.2 (ALPHA)
172 - Cleanups.
173 - Integrated with Linux voxware v 2.90-2 kernel sound driver.
174 - SoundBlaster Pro mode configuration.
175 - Microsoft Sound System mode configuration.
176 - MPU-401 mode configuration.
177 v0.3 (ALPHA)
178 - Cleanups.
179 - Rearranged the code to let aedsp16_init_board be more general.
180 - Erased the REALLY_SLOW_IO. We don't need it. Erased the linux/io.h
181 inclusion too. We rely on os.h
182 - Used the to get a variable
183 len string (we are not sure about the len of Copyright string).
184 This works with any SB and compatible.
185 - Added the code to request_region at device init (should go in
186 the main body of voxware).
187 v0.4 (BETA)
188 - Better configure.c patch for aedsp16 configuration (better
189 logic of inclusion of AEDSP16 support)
190 - Modified the conditional compilation to better support more than
191 one sound card of the emulated type (read the NOTES above)
192 - Moved the sb init routine from the attach to the very first
193 probe in sb_card.c
194 - Rearrangements and cleanups
195 - Wiped out some unnecessary code and variables: this is kernel
196 code so it is better save some TEXT and DATA
197 - Fixed the request_region code. We must allocate the aedsp16 (sbpro)
198 I/O ports in any case because they are used to access the DSP
199 configuration registers and we can not allow anyone to get them.
200 v0.5
201 - cleanups on comments
202 - prep for diffs against v3.0-proto-950402
203 v0.6
204 - removed the request_region()s when compiling the MODULE sound.o
205 because we are not allowed (by the actual voxware structure) to
206 release_region()
207 v0.7 (pre ALPHA, not distributed)
208 - started porting this module to kernel 1.3.84. Dummy probe/attach
209 routines.
210 v0.8 (ALPHA)
211 - attached all the init routines.
212 v0.9 (BETA)
213 - Integrated with linux-pre2.0.7
214 - Integrated with configuration scripts.
215 - Cleaned up and beautyfied the code.
216 v0.9.9 (BETA)
217 - Thanks to Piercarlo Grandi: corrected the conditonal compilation code.
218 Now only the code configured is compiled in, with some memory saving.
219 v0.9.10
220 - Integration into the sound/lowlevel/ section of the sound driver.
221 - Re-organized the code.
222 v0.9.11 (not distributed)
223 - Rewritten the init interface-routines to initialize the AEDSP16 in
224 one shot.
225 - More cosmetics.
226 - SC-6600 support.
227 - More soft/hard configuration.
228 v0.9.12
229 - Refined the v0.9.11 code with conditional compilation to distinguish
230 between SC-6000 and SC-6600 code.
231 v1.0.0
232 - Prep for merging with OSS Lite and Linux kernel 2.1.13
233 - Corrected a bug in request/check/release region calls (thanks to the
234 new kernel exception handling).
235 v1.1
236 - Revamped for integration with new modularized sound drivers: to enhance
237 the flexibility of modular version, I have removed all the conditional
238 compilation for SBPRO, MPU and MSS code. Now it is all managed with
239 the ae_config structure.
240 v1.2
241 - Module informations added.
242 - Removed aedsp16_delay_10msec(), now using mdelay(10)
243 - All data and funcs moved to .*.init section.
244 v1.3
245 Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 2000/09/27
246 - got rid of check_region
247
248 Known Problems:
249 - Audio Excel DSP 16 III don't work with this driver.
250
251 Credits:
252 Many thanks to Gerald Britton <gbritton@CapAccess.org>. He helped me a
253 lot in testing the 0.9.11 and 0.9.12 versions of this driver.
254
255 */
256
257
258 #define VERSION "1.3" /* Version of Audio Excel DSP 16 driver */
259
260 #undef AEDSP16_DEBUG /* Define this to 1 to enable debug code */
261 #undef AEDSP16_DEBUG_MORE /* Define this to 1 to enable more debug */
262 #undef AEDSP16_INFO /* Define this to 1 to enable info code */
263
264 #if defined(AEDSP16_DEBUG)
265 # define DBG(x) printk x
266 # if defined(AEDSP16_DEBUG_MORE)
267 # define DBG1(x) printk x
268 # else
269 # define DBG1(x)
270 # endif
271 #else
272 # define DBG(x)
273 # define DBG1(x)
274 #endif
275
276 /*
277 * Misc definitions
278 */
279 #define TRUE 1
280 #define FALSE 0
281
282 /*
283 * Region Size for request/check/release region.
284 */
285 #define IOBASE_REGION_SIZE 0x10
286
287 /*
288 * Hardware related defaults
289 */
290 #define DEF_AEDSP16_IOB 0x220 /* 0x220(default) 0x240 */
291 #define DEF_AEDSP16_IRQ 7 /* 5 7(default) 9 10 11 */
292 #define DEF_AEDSP16_MRQ 0 /* 5 7 9 10 0(default), 0 means disable */
293 #define DEF_AEDSP16_DMA 1 /* 0 1(default) 3 */
294
295 /*
296 * Commands of AEDSP16's DSP (SBPRO+special).
297 * Some of them are COMMAND_xx, in the future they may change.
298 */
299 #define WRITE_MDIRQ_CFG 0x50 /* Set M&I&DRQ mask (the real config) */
300 #define COMMAND_52 0x52 /* */
301 #define READ_HARD_CFG 0x58 /* Read Hardware Config (I/O base etc) */
302 #define COMMAND_5C 0x5c /* */
303 #define COMMAND_60 0x60 /* */
304 #define COMMAND_66 0x66 /* */
305 #define COMMAND_6C 0x6c /* */
306 #define COMMAND_6E 0x6e /* */
307 #define COMMAND_88 0x88 /* */
308 #define DSP_INIT_MSS 0x8c /* Enable Microsoft Sound System mode */
309 #define COMMAND_C5 0xc5 /* */
310 #define GET_DSP_VERSION 0xe1 /* Get DSP Version */
311 #define GET_DSP_COPYRIGHT 0xe3 /* Get DSP Copyright */
312
313 /*
314 * Offsets of AEDSP16 DSP I/O ports. The offset is added to base I/O port
315 * to have the actual I/O port.
316 * Register permissions are:
317 * (wo) == Write Only
318 * (ro) == Read Only
319 * (w-) == Write
320 * (r-) == Read
321 */
322 #define DSP_RESET 0x06 /* offset of DSP RESET (wo) */
323 #define DSP_READ 0x0a /* offset of DSP READ (ro) */
324 #define DSP_WRITE 0x0c /* offset of DSP WRITE (w-) */
325 #define DSP_COMMAND 0x0c /* offset of DSP COMMAND (w-) */
326 #define DSP_STATUS 0x0c /* offset of DSP STATUS (r-) */
327 #define DSP_DATAVAIL 0x0e /* offset of DSP DATA AVAILABLE (ro) */
328
329
330 #define RETRY 10 /* Various retry values on I/O opera- */
331 #define STATUSRETRY 1000 /* tions. Sometimes we have to */
332 #define HARDRETRY 500000 /* wait for previous cmd to complete */
333
334 /*
335 * Size of character arrays that store name and version of sound card
336 */
337 #define CARDNAMELEN 15 /* Size of the card's name in chars */
338 #define CARDVERLEN 2 /* Size of the card's version in chars */
339
340 #if defined(CONFIG_SC6600)
341 /*
342 * Bitmapped flags of hard configuration
343 */
344 /*
345 * Decode macros (xl == low byte, xh = high byte)
346 */
347 #define IOBASE(xl) ((xl & 0x01)?0x240:0x220)
348 #define JOY(xl) (xl & 0x02)
349 #define MPUADDR(xl) ( \
350 (xl & 0x0C)?0x330: \
351 (xl & 0x08)?0x320: \
352 (xl & 0x04)?0x310: \
353 0x300)
354 #define WSSADDR(xl) ((xl & 0x10)?0xE80:0x530)
355 #define CDROM(xh) (xh & 0x20)
356 #define CDROMADDR(xh) (((xh & 0x1F) << 4) + 0x200)
357 /*
358 * Encode macros
359 */
360 #define BLDIOBASE(xl, val) { \
361 xl &= ~0x01; \
362 if (val == 0x240) \
363 xl |= 0x01; \
364 }
365 #define BLDJOY(xl, val) { \
366 xl &= ~0x02; \
367 if (val == 1) \
368 xl |= 0x02; \
369 }
370 #define BLDMPUADDR(xl, val) { \
371 xl &= ~0x0C; \
372 switch (val) { \
373 case 0x330: \
374 xl |= 0x0C; \
375 break; \
376 case 0x320: \
377 xl |= 0x08; \
378 break; \
379 case 0x310: \
380 xl |= 0x04; \
381 break; \
382 case 0x300: \
383 xl |= 0x00; \
384 break; \
385 default: \
386 xl |= 0x00; \
387 break; \
388 } \
389 }
390 #define BLDWSSADDR(xl, val) { \
391 xl &= ~0x10; \
392 if (val == 0xE80) \
393 xl |= 0x10; \
394 }
395 #define BLDCDROM(xh, val) { \
396 xh &= ~0x20; \
397 if (val == 1) \
398 xh |= 0x20; \
399 }
400 #define BLDCDROMADDR(xh, val) { \
401 int tmp = val; \
402 tmp -= 0x200; \
403 tmp >>= 4; \
404 tmp &= 0x1F; \
405 xh |= tmp; \
406 xh &= 0x7F; \
407 xh |= 0x40; \
408 }
409 #endif /* CONFIG_SC6600 */
410
411 /*
412 * Bit mapped flags for calling aedsp16_init_board(), and saving the current
413 * emulation mode.
414 */
415 #define INIT_NONE (0 )
416 #define INIT_SBPRO (1<<0)
417 #define INIT_MSS (1<<1)
418 #define INIT_MPU401 (1<<2)
419
420 static int soft_cfg __initdata = 0; /* bitmapped config */
421 static int soft_cfg_mss __initdata = 0; /* bitmapped mss config */
422 static int ver[CARDVERLEN] __initdata = {0, 0}; /* DSP Ver:
423 hi->ver[0] lo->ver[1] */
424
425 #if defined(CONFIG_SC6600)
426 static int hard_cfg[2] /* lo<-hard_cfg[0] hi<-hard_cfg[1] */
427 __initdata = { 0, 0};
428 #endif /* CONFIG_SC6600 */
429
430 #if defined(CONFIG_SC6600)
431 /* Decoded hard configuration */
432 struct d_hcfg {
433 int iobase;
434 int joystick;
435 int mpubase;
436 int wssbase;
437 int cdrom;
438 int cdrombase;
439 };
440
441 static struct d_hcfg decoded_hcfg __initdata = {0, };
442
443 #endif /* CONFIG_SC6600 */
444
445 /* orVals contain the values to be or'ed */
446 struct orVals {
447 int val; /* irq|mirq|dma */
448 int or; /* soft_cfg |= TheStruct.or */
449 };
450
451 /* aedsp16_info contain the audio card configuration */
452 struct aedsp16_info {
453 int base_io; /* base I/O address for accessing card */
454 int irq; /* irq value for DSP I/O */
455 int mpu_irq; /* irq for mpu401 interface I/O */
456 int dma; /* dma value for DSP I/O */
457 int mss_base; /* base I/O for Microsoft Sound System */
458 int mpu_base; /* base I/O for MPU-401 emulation */
459 int init; /* Initialization status of the card */
460 };
461
462 /*
463 * Magic values that the DSP will eat when configuring irq/mirq/dma
464 */
465 /* DSP IRQ conversion array */
466 static struct orVals orIRQ[] __initdata = {
467 {0x05, 0x28},
468 {0x07, 0x08},
469 {0x09, 0x10},
470 {0x0a, 0x18},
471 {0x0b, 0x20},
472 {0x00, 0x00}
473 };
474
475 /* MPU-401 IRQ conversion array */
476 static struct orVals orMIRQ[] __initdata = {
477 {0x05, 0x04},
478 {0x07, 0x44},
479 {0x09, 0x84},
480 {0x0a, 0xc4},
481 {0x00, 0x00}
482 };
483
484 /* DMA Channels conversion array */
485 static struct orVals orDMA[] __initdata = {
486 {0x00, 0x01},
487 {0x01, 0x02},
488 {0x03, 0x03},
489 {0x00, 0x00}
490 };
491
492 static struct aedsp16_info ae_config = {
493 DEF_AEDSP16_IOB,
494 DEF_AEDSP16_IRQ,
495 DEF_AEDSP16_MRQ,
496 DEF_AEDSP16_DMA,
497 -1,
498 -1,
499 INIT_NONE
500 };
501
502 /*
503 * Buffers to store audio card informations
504 */
505 static char DSPCopyright[CARDNAMELEN + 1] __initdata = {0, };
506 static char DSPVersion[CARDVERLEN + 1] __initdata = {0, };
507
508 static int __init aedsp16_wait_data(int port)
509 {
510 int loop = STATUSRETRY;
511 unsigned char ret = 0;
512
513 DBG1(("aedsp16_wait_data (0x%x): ", port));
514
515 do {
516 ret = inb(port + DSP_DATAVAIL);
517 /*
518 * Wait for data available (bit 7 of ret == 1)
519 */
520 } while (!(ret & 0x80) && loop--);
521
522 if (ret & 0x80) {
523 DBG1(("success.\n"));
524 return TRUE;
525 }
526
527 DBG1(("failure.\n"));
528 return FALSE;
529 }
530
531 static int __init aedsp16_read(int port)
532 {
533 int inbyte;
534
535 DBG((" Read DSP Byte (0x%x): ", port));
536
537 if (aedsp16_wait_data(port) == FALSE) {
538 DBG(("failure.\n"));
539 return -1;
540 }
541
542 inbyte = inb(port + DSP_READ);
543
544 DBG(("read [0x%x]/{%c}.\n", inbyte, inbyte));
545
546 return inbyte;
547 }
548
549 static int __init aedsp16_test_dsp(int port)
550 {
551 return ((aedsp16_read(port) == 0xaa) ? TRUE : FALSE);
552 }
553
554 static int __init aedsp16_dsp_reset(int port)
555 {
556 /*
557 * Reset DSP
558 */
559
560 DBG(("Reset DSP:\n"));
561
562 outb(1, (port + DSP_RESET));
563 udelay(10);
564 outb(0, (port + DSP_RESET));
565 udelay(10);
566 udelay(10);
567 if (aedsp16_test_dsp(port) == TRUE) {
568 DBG(("success.\n"));
569 return TRUE;
570 } else
571 DBG(("failure.\n"));
572 return FALSE;
573 }
574
575 static int __init aedsp16_write(int port, int cmd)
576 {
577 unsigned char ret;
578 int loop = HARDRETRY;
579
580 DBG((" Write DSP Byte (0x%x) [0x%x]: ", port, cmd));
581
582 do {
583 ret = inb(port + DSP_STATUS);
584 /*
585 * DSP ready to receive data if bit 7 of ret == 0
586 */
587 if (!(ret & 0x80)) {
588 outb(cmd, port + DSP_COMMAND);
589 DBG(("success.\n"));
590 return 0;
591 }
592 } while (loop--);
593
594 DBG(("timeout.\n"));
595 printk("[AEDSP16] DSP Command (0x%x) timeout.\n", cmd);
596
597 return -1;
598 }
599
600 #if defined(CONFIG_SC6600)
601
602 #if defined(AEDSP16_INFO) || defined(AEDSP16_DEBUG)
603 void __init aedsp16_pinfo(void) {
604 DBG(("\n Base address: %x\n", decoded_hcfg.iobase));
605 DBG((" Joystick : %s present\n", decoded_hcfg.joystick?"":" not"));
606 DBG((" WSS addr : %x\n", decoded_hcfg.wssbase));
607 DBG((" MPU-401 addr: %x\n", decoded_hcfg.mpubase));
608 DBG((" CDROM : %s present\n", (decoded_hcfg.cdrom!=4)?"":" not"));
609 DBG((" CDROMADDR : %x\n\n", decoded_hcfg.cdrombase));
610 }
611 #endif
612
613 static void __init aedsp16_hard_decode(void) {
614
615 DBG((" aedsp16_hard_decode: 0x%x, 0x%x\n", hard_cfg[0], hard_cfg[1]));
616
617 /*
618 * Decode Cfg Bytes.
619 */
620 decoded_hcfg.iobase = IOBASE(hard_cfg[0]);
621 decoded_hcfg.joystick = JOY(hard_cfg[0]);
622 decoded_hcfg.wssbase = WSSADDR(hard_cfg[0]);
623 decoded_hcfg.mpubase = MPUADDR(hard_cfg[0]);
624 decoded_hcfg.cdrom = CDROM(hard_cfg[1]);
625 decoded_hcfg.cdrombase = CDROMADDR(hard_cfg[1]);
626
627 #if defined(AEDSP16_INFO) || defined(AEDSP16_DEBUG)
628 printk(" Original sound card configuration:\n");
629 aedsp16_pinfo();
630 #endif
631
632 /*
633 * Now set up the real kernel configuration.
634 */
635 decoded_hcfg.iobase = ae_config.base_io;
636 decoded_hcfg.wssbase = ae_config.mss_base;
637 decoded_hcfg.mpubase = ae_config.mpu_base;
638
639 #if defined(CONFIG_SC6600_JOY)
640 decoded_hcfg.joystick = CONFIG_SC6600_JOY; /* Enable */
641 #endif
642 #if defined(CONFIG_SC6600_CDROM)
643 decoded_hcfg.cdrom = CONFIG_SC6600_CDROM; /* 4:N-3:I-2:G-1:P-0:S */
644 #endif
645 #if defined(CONFIG_SC6600_CDROMBASE)
646 decoded_hcfg.cdrombase = CONFIG_SC6600_CDROMBASE; /* 0 Disable */
647 #endif
648
649 #if defined(AEDSP16_DEBUG)
650 DBG((" New Values:\n"));
651 aedsp16_pinfo();
652 #endif
653
654 DBG(("success.\n"));
655 }
656
657 static void __init aedsp16_hard_encode(void) {
658
659 DBG((" aedsp16_hard_encode: 0x%x, 0x%x\n", hard_cfg[0], hard_cfg[1]));
660
661 hard_cfg[0] = 0;
662 hard_cfg[1] = 0;
663
664 hard_cfg[0] |= 0x20;
665
666 BLDIOBASE (hard_cfg[0], decoded_hcfg.iobase);
667 BLDWSSADDR(hard_cfg[0], decoded_hcfg.wssbase);
668 BLDMPUADDR(hard_cfg[0], decoded_hcfg.mpubase);
669 BLDJOY(hard_cfg[0], decoded_hcfg.joystick);
670 BLDCDROM(hard_cfg[1], decoded_hcfg.cdrom);
671 BLDCDROMADDR(hard_cfg[1], decoded_hcfg.cdrombase);
672
673 #if defined(AEDSP16_DEBUG)
674 aedsp16_pinfo();
675 #endif
676
677 DBG((" aedsp16_hard_encode: 0x%x, 0x%x\n", hard_cfg[0], hard_cfg[1]));
678 DBG(("success.\n"));
679
680 }
681
682 static int __init aedsp16_hard_write(int port) {
683
684 DBG(("aedsp16_hard_write:\n"));
685
686 if (aedsp16_write(port, COMMAND_6C)) {
687 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_6C);
688 DBG(("failure.\n"));
689 return FALSE;
690 }
691 if (aedsp16_write(port, COMMAND_5C)) {
692 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_5C);
693 DBG(("failure.\n"));
694 return FALSE;
695 }
696 if (aedsp16_write(port, hard_cfg[0])) {
697 printk("[AEDSP16] DATA 0x%x: failed!\n", hard_cfg[0]);
698 DBG(("failure.\n"));
699 return FALSE;
700 }
701 if (aedsp16_write(port, hard_cfg[1])) {
702 printk("[AEDSP16] DATA 0x%x: failed!\n", hard_cfg[1]);
703 DBG(("failure.\n"));
704 return FALSE;
705 }
706 if (aedsp16_write(port, COMMAND_C5)) {
707 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_C5);
708 DBG(("failure.\n"));
709 return FALSE;
710 }
711
712 DBG(("success.\n"));
713
714 return TRUE;
715 }
716
717 static int __init aedsp16_hard_read(int port) {
718
719 DBG(("aedsp16_hard_read:\n"));
720
721 if (aedsp16_write(port, READ_HARD_CFG)) {
722 printk("[AEDSP16] CMD 0x%x: failed!\n", READ_HARD_CFG);
723 DBG(("failure.\n"));
724 return FALSE;
725 }
726
727 if ((hard_cfg[0] = aedsp16_read(port)) == -1) {
728 printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n",
729 READ_HARD_CFG);
730 DBG(("failure.\n"));
731 return FALSE;
732 }
733 if ((hard_cfg[1] = aedsp16_read(port)) == -1) {
734 printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n",
735 READ_HARD_CFG);
736 DBG(("failure.\n"));
737 return FALSE;
738 }
739 if (aedsp16_read(port) == -1) {
740 printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n",
741 READ_HARD_CFG);
742 DBG(("failure.\n"));
743 return FALSE;
744 }
745
746 DBG(("success.\n"));
747
748 return TRUE;
749 }
750
751 static int __init aedsp16_ext_cfg_write(int port) {
752
753 int extcfg, val;
754
755 if (aedsp16_write(port, COMMAND_66)) {
756 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_66);
757 return FALSE;
758 }
759
760 extcfg = 7;
761 if (decoded_hcfg.cdrom != 2)
762 extcfg = 0x0F;
763 if ((decoded_hcfg.cdrom == 4) ||
764 (decoded_hcfg.cdrom == 3))
765 extcfg &= ~2;
766 if (decoded_hcfg.cdrombase == 0)
767 extcfg &= ~2;
768 if (decoded_hcfg.mpubase == 0)
769 extcfg &= ~1;
770
771 if (aedsp16_write(port, extcfg)) {
772 printk("[AEDSP16] Write extcfg: failed!\n");
773 return FALSE;
774 }
775 if (aedsp16_write(port, 0)) {
776 printk("[AEDSP16] Write extcfg: failed!\n");
777 return FALSE;
778 }
779 if (decoded_hcfg.cdrom == 3) {
780 if (aedsp16_write(port, COMMAND_52)) {
781 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_52);
782 return FALSE;
783 }
784 if ((val = aedsp16_read(port)) == -1) {
785 printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n"
786 , COMMAND_52);
787 return FALSE;
788 }
789 val &= 0x7F;
790 if (aedsp16_write(port, COMMAND_60)) {
791 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_60);
792 return FALSE;
793 }
794 if (aedsp16_write(port, val)) {
795 printk("[AEDSP16] Write val: failed!\n");
796 return FALSE;
797 }
798 }
799
800 return TRUE;
801 }
802
803 #endif /* CONFIG_SC6600 */
804
805 static int __init aedsp16_cfg_write(int port) {
806 if (aedsp16_write(port, WRITE_MDIRQ_CFG)) {
807 printk("[AEDSP16] CMD 0x%x: failed!\n", WRITE_MDIRQ_CFG);
808 return FALSE;
809 }
810 if (aedsp16_write(port, soft_cfg)) {
811 printk("[AEDSP16] Initialization of (M)IRQ and DMA: failed!\n");
812 return FALSE;
813 }
814 return TRUE;
815 }
816
817 static int __init aedsp16_init_mss(int port)
818 {
819 DBG(("aedsp16_init_mss:\n"));
820
821 mdelay(10);
822
823 if (aedsp16_write(port, DSP_INIT_MSS)) {
824 printk("[AEDSP16] aedsp16_init_mss [0x%x]: failed!\n",
825 DSP_INIT_MSS);
826 DBG(("failure.\n"));
827 return FALSE;
828 }
829
830 mdelay(10);
831
832 if (aedsp16_cfg_write(port) == FALSE)
833 return FALSE;
834
835 outb(soft_cfg_mss, ae_config.mss_base);
836
837 DBG(("success.\n"));
838
839 return TRUE;
840 }
841
842 static int __init aedsp16_setup_board(int port) {
843 int loop = RETRY;
844
845 #if defined(CONFIG_SC6600)
846 int val = 0;
847
848 if (aedsp16_hard_read(port) == FALSE) {
849 printk("[AEDSP16] aedsp16_hard_read: failed!\n");
850 return FALSE;
851 }
852
853 if (aedsp16_write(port, COMMAND_52)) {
854 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_52);
855 return FALSE;
856 }
857
858 if ((val = aedsp16_read(port)) == -1) {
859 printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n",
860 COMMAND_52);
861 return FALSE;
862 }
863 #endif
864
865 do {
866 if (aedsp16_write(port, COMMAND_88)) {
867 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_88);
868 return FALSE;
869 }
870 mdelay(10);
871 } while ((aedsp16_wait_data(port) == FALSE) && loop--);
872
873 if (aedsp16_read(port) == -1) {
874 printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n",
875 COMMAND_88);
876 return FALSE;
877 }
878
879 #if !defined(CONFIG_SC6600)
880 if (aedsp16_write(port, COMMAND_5C)) {
881 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_5C);
882 return FALSE;
883 }
884 #endif
885
886 if (aedsp16_cfg_write(port) == FALSE)
887 return FALSE;
888
889 #if defined(CONFIG_SC6600)
890 if (aedsp16_write(port, COMMAND_60)) {
891 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_60);
892 return FALSE;
893 }
894 if (aedsp16_write(port, val)) {
895 printk("[AEDSP16] DATA 0x%x: failed!\n", val);
896 return FALSE;
897 }
898 if (aedsp16_write(port, COMMAND_6E)) {
899 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_6E);
900 return FALSE;
901 }
902 if (aedsp16_write(port, ver[0])) {
903 printk("[AEDSP16] DATA 0x%x: failed!\n", ver[0]);
904 return FALSE;
905 }
906 if (aedsp16_write(port, ver[1])) {
907 printk("[AEDSP16] DATA 0x%x: failed!\n", ver[1]);
908 return FALSE;
909 }
910
911 if (aedsp16_hard_write(port) == FALSE) {
912 printk("[AEDSP16] aedsp16_hard_write: failed!\n");
913 return FALSE;
914 }
915
916 if (aedsp16_write(port, COMMAND_5C)) {
917 printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_5C);
918 return FALSE;
919 }
920
921 #if defined(THIS_IS_A_THING_I_HAVE_NOT_TESTED_YET)
922 if (aedsp16_cfg_write(port) == FALSE)
923 return FALSE;
924 #endif
925
926 #endif
927
928 return TRUE;
929 }
930
931 static int __init aedsp16_stdcfg(int port) {
932 if (aedsp16_write(port, WRITE_MDIRQ_CFG)) {
933 printk("[AEDSP16] CMD 0x%x: failed!\n", WRITE_MDIRQ_CFG);
934 return FALSE;
935 }
936 /*
937 * 0x0A == (IRQ 7, DMA 1, MIRQ 0)
938 */
939 if (aedsp16_write(port, 0x0A)) {
940 printk("[AEDSP16] aedsp16_stdcfg: failed!\n");
941 return FALSE;
942 }
943 return TRUE;
944 }
945
946 static int __init aedsp16_dsp_version(int port)
947 {
948 int len = 0;
949 int ret;
950
951 DBG(("Get DSP Version:\n"));
952
953 if (aedsp16_write(ae_config.base_io, GET_DSP_VERSION)) {
954 printk("[AEDSP16] CMD 0x%x: failed!\n", GET_DSP_VERSION);
955 DBG(("failed.\n"));
956 return FALSE;
957 }
958
959 do {
960 if ((ret = aedsp16_read(port)) == -1) {
961 DBG(("failed.\n"));
962 return FALSE;
963 }
964 /*
965 * We already know how many int are stored (2), so we know when the
966 * string is finished.
967 */
968 ver[len++] = ret;
969 } while (len < CARDVERLEN);
970 sprintf(DSPVersion, "%d.%d", ver[0], ver[1]);
971
972 DBG(("success.\n"));
973
974 return TRUE;
975 }
976
977 static int __init aedsp16_dsp_copyright(int port)
978 {
979 int len = 0;
980 int ret;
981
982 DBG(("Get DSP Copyright:\n"));
983
984 if (aedsp16_write(ae_config.base_io, GET_DSP_COPYRIGHT)) {
985 printk("[AEDSP16] CMD 0x%x: failed!\n", GET_DSP_COPYRIGHT);
986 DBG(("failed.\n"));
987 return FALSE;
988 }
989
990 do {
991 if ((ret = aedsp16_read(port)) == -1) {
992 /*
993 * If no more data available, return to the caller, no error if len>0.
994 * We have no other way to know when the string is finished.
995 */
996 if (len)
997 break;
998 else {
999 DBG(("failed.\n"));
1000 return FALSE;
1001 }
1002 }
1003
1004 DSPCopyright[len++] = ret;
1005
1006 } while (len < CARDNAMELEN);
1007
1008 DBG(("success.\n"));
1009
1010 return TRUE;
1011 }
1012
1013 static void __init aedsp16_init_tables(void)
1014 {
1015 int i = 0;
1016
1017 memset(DSPCopyright, 0, CARDNAMELEN + 1);
1018 memset(DSPVersion, 0, CARDVERLEN + 1);
1019
1020 for (i = 0; orIRQ[i].or; i++)
1021 if (orIRQ[i].val == ae_config.irq) {
1022 soft_cfg |= orIRQ[i].or;
1023 soft_cfg_mss |= orIRQ[i].or;
1024 }
1025
1026 for (i = 0; orMIRQ[i].or; i++)
1027 if (orMIRQ[i].or == ae_config.mpu_irq)
1028 soft_cfg |= orMIRQ[i].or;
1029
1030 for (i = 0; orDMA[i].or; i++)
1031 if (orDMA[i].val == ae_config.dma) {
1032 soft_cfg |= orDMA[i].or;
1033 soft_cfg_mss |= orDMA[i].or;
1034 }
1035 }
1036
1037 static int __init aedsp16_init_board(void)
1038 {
1039 aedsp16_init_tables();
1040
1041 if (aedsp16_dsp_reset(ae_config.base_io) == FALSE) {
1042 printk("[AEDSP16] aedsp16_dsp_reset: failed!\n");
1043 return FALSE;
1044 }
1045 if (aedsp16_dsp_copyright(ae_config.base_io) == FALSE) {
1046 printk("[AEDSP16] aedsp16_dsp_copyright: failed!\n");
1047 return FALSE;
1048 }
1049
1050 /*
1051 * My AEDSP16 card return SC-6000 in DSPCopyright, so
1052 * if we have something different, we have to be warned.
1053 */
1054 if (strcmp("SC-6000", DSPCopyright))
1055 printk("[AEDSP16] Warning: non SC-6000 audio card!\n");
1056
1057 if (aedsp16_dsp_version(ae_config.base_io) == FALSE) {
1058 printk("[AEDSP16] aedsp16_dsp_version: failed!\n");
1059 return FALSE;
1060 }
1061
1062 if (aedsp16_stdcfg(ae_config.base_io) == FALSE) {
1063 printk("[AEDSP16] aedsp16_stdcfg: failed!\n");
1064 return FALSE;
1065 }
1066
1067 #if defined(CONFIG_SC6600)
1068 if (aedsp16_hard_read(ae_config.base_io) == FALSE) {
1069 printk("[AEDSP16] aedsp16_hard_read: failed!\n");
1070 return FALSE;
1071 }
1072
1073 aedsp16_hard_decode();
1074
1075 aedsp16_hard_encode();
1076
1077 if (aedsp16_hard_write(ae_config.base_io) == FALSE) {
1078 printk("[AEDSP16] aedsp16_hard_write: failed!\n");
1079 return FALSE;
1080 }
1081
1082 if (aedsp16_ext_cfg_write(ae_config.base_io) == FALSE) {
1083 printk("[AEDSP16] aedsp16_ext_cfg_write: failed!\n");
1084 return FALSE;
1085 }
1086 #endif /* CONFIG_SC6600 */
1087
1088 if (aedsp16_setup_board(ae_config.base_io) == FALSE) {
1089 printk("[AEDSP16] aedsp16_setup_board: failed!\n");
1090 return FALSE;
1091 }
1092
1093 if (ae_config.mss_base != -1) {
1094 if (ae_config.init & INIT_MSS) {
1095 if (aedsp16_init_mss(ae_config.base_io) == FALSE) {
1096 printk("[AEDSP16] Can not initialize"
1097 "Microsoft Sound System mode.\n");
1098 return FALSE;
1099 }
1100 }
1101 }
1102
1103 #if !defined(MODULE) || defined(AEDSP16_INFO) || defined(AEDSP16_DEBUG)
1104
1105 printk("Audio Excel DSP 16 init v%s (%s %s) [",
1106 VERSION, DSPCopyright,
1107 DSPVersion);
1108
1109 if (ae_config.mpu_base != -1) {
1110 if (ae_config.init & INIT_MPU401) {
1111 printk("MPU401");
1112 if ((ae_config.init & INIT_MSS) ||
1113 (ae_config.init & INIT_SBPRO))
1114 printk(" ");
1115 }
1116 }
1117
1118 if (ae_config.mss_base == -1) {
1119 if (ae_config.init & INIT_SBPRO) {
1120 printk("SBPro");
1121 if (ae_config.init & INIT_MSS)
1122 printk(" ");
1123 }
1124 }
1125
1126 if (ae_config.mss_base != -1)
1127 if (ae_config.init & INIT_MSS)
1128 printk("MSS");
1129
1130 printk("]\n");
1131 #endif /* MODULE || AEDSP16_INFO || AEDSP16_DEBUG */
1132
1133 mdelay(10);
1134
1135 return TRUE;
1136 }
1137
1138 static int __init init_aedsp16_sb(void)
1139 {
1140 DBG(("init_aedsp16_sb: "));
1141
1142 /*
1143 * If the card is already init'ed MSS, we can not init it to SBPRO too
1144 * because the board can not emulate simultaneously MSS and SBPRO.
1145 */
1146 if (ae_config.init & INIT_MSS)
1147 return FALSE;
1148 if (ae_config.init & INIT_SBPRO)
1149 return FALSE;
1150
1151 ae_config.init |= INIT_SBPRO;
1152
1153 DBG(("done.\n"));
1154
1155 return TRUE;
1156 }
1157
1158 static void uninit_aedsp16_sb(void)
1159 {
1160 DBG(("uninit_aedsp16_sb: "));
1161
1162 ae_config.init &= ~INIT_SBPRO;
1163
1164 DBG(("done.\n"));
1165 }
1166
1167 static int __init init_aedsp16_mss(void)
1168 {
1169 DBG(("init_aedsp16_mss: "));
1170
1171 /*
1172 * If the card is already init'ed SBPRO, we can not init it to MSS too
1173 * because the board can not emulate simultaneously MSS and SBPRO.
1174 */
1175 if (ae_config.init & INIT_SBPRO)
1176 return FALSE;
1177 if (ae_config.init & INIT_MSS)
1178 return FALSE;
1179 /*
1180 * We must allocate the CONFIG_AEDSP16_BASE region too because these are the
1181 * I/O ports to access card's control registers.
1182 */
1183 if (!(ae_config.init & INIT_MPU401)) {
1184 if (!request_region(ae_config.base_io, IOBASE_REGION_SIZE,
1185 "aedsp16 (base)")) {
1186 printk(
1187 "AEDSP16 BASE I/O port region is already in use.\n");
1188 return FALSE;
1189 }
1190 }
1191
1192 ae_config.init |= INIT_MSS;
1193
1194 DBG(("done.\n"));
1195
1196 return TRUE;
1197 }
1198
1199 static void uninit_aedsp16_mss(void)
1200 {
1201 DBG(("uninit_aedsp16_mss: "));
1202
1203 if ((!(ae_config.init & INIT_MPU401)) &&
1204 (ae_config.init & INIT_MSS)) {
1205 release_region(ae_config.base_io, IOBASE_REGION_SIZE);
1206 DBG(("AEDSP16 base region released.\n"));
1207 }
1208
1209 ae_config.init &= ~INIT_MSS;
1210 DBG(("done.\n"));
1211 }
1212
1213 static int __init init_aedsp16_mpu(void)
1214 {
1215 DBG(("init_aedsp16_mpu: "));
1216
1217 if (ae_config.init & INIT_MPU401)
1218 return FALSE;
1219
1220 /*
1221 * We must request the CONFIG_AEDSP16_BASE region too because these are the I/O
1222 * ports to access card's control registers.
1223 */
1224 if (!(ae_config.init & (INIT_MSS | INIT_SBPRO))) {
1225 if (!request_region(ae_config.base_io, IOBASE_REGION_SIZE,
1226 "aedsp16 (base)")) {
1227 printk(
1228 "AEDSP16 BASE I/O port region is already in use.\n");
1229 return FALSE;
1230 }
1231 }
1232
1233 ae_config.init |= INIT_MPU401;
1234
1235 DBG(("done.\n"));
1236
1237 return TRUE;
1238 }
1239
1240 static void uninit_aedsp16_mpu(void)
1241 {
1242 DBG(("uninit_aedsp16_mpu: "));
1243
1244 if ((!(ae_config.init & (INIT_MSS | INIT_SBPRO))) &&
1245 (ae_config.init & INIT_MPU401)) {
1246 release_region(ae_config.base_io, IOBASE_REGION_SIZE);
1247 DBG(("AEDSP16 base region released.\n"));
1248 }
1249
1250 ae_config.init &= ~INIT_MPU401;
1251
1252 DBG(("done.\n"));
1253 }
1254
1255 static int __init init_aedsp16(void)
1256 {
1257 int initialized = FALSE;
1258
1259 DBG(("Initializing BASE[0x%x] IRQ[%d] DMA[%d] MIRQ[%d]\n",
1260 ae_config.base_io,ae_config.irq,ae_config.dma,ae_config.mpu_irq));
1261
1262 if (ae_config.mss_base == -1) {
1263 if (init_aedsp16_sb() == FALSE) {
1264 uninit_aedsp16_sb();
1265 } else {
1266 initialized = TRUE;
1267 }
1268 }
1269
1270 if (ae_config.mpu_base != -1) {
1271 if (init_aedsp16_mpu() == FALSE) {
1272 uninit_aedsp16_mpu();
1273 } else {
1274 initialized = TRUE;
1275 }
1276 }
1277
1278 /*
1279 * In the sequence of init routines, the MSS init MUST be the last!
1280 * This because of the special register programming the MSS mode needs.
1281 * A board reset would disable the MSS mode restoring the default SBPRO
1282 * mode.
1283 */
1284 if (ae_config.mss_base != -1) {
1285 if (init_aedsp16_mss() == FALSE) {
1286 uninit_aedsp16_mss();
1287 } else {
1288 initialized = TRUE;
1289 }
1290 }
1291
1292 if (initialized)
1293 initialized = aedsp16_init_board();
1294 return initialized;
1295 }
1296
1297 static void __exit uninit_aedsp16(void)
1298 {
1299 if (ae_config.mss_base != -1)
1300 uninit_aedsp16_mss();
1301 else
1302 uninit_aedsp16_sb();
1303 if (ae_config.mpu_base != -1)
1304 uninit_aedsp16_mpu();
1305 }
1306
1307 static int __initdata io = -1;
1308 static int __initdata irq = -1;
1309 static int __initdata dma = -1;
1310 static int __initdata mpu_irq = -1;
1311 static int __initdata mss_base = -1;
1312 static int __initdata mpu_base = -1;
1313
1314 module_param(io, int, 0);
1315 MODULE_PARM_DESC(io, "I/O base address (0x220 0x240)");
1316 module_param(irq, int, 0);
1317 MODULE_PARM_DESC(irq, "IRQ line (5 7 9 10 11)");
1318 module_param(dma, int, 0);
1319 MODULE_PARM_DESC(dma, "dma line (0 1 3)");
1320 module_param(mpu_irq, int, 0);
1321 MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ line (5 7 9 10 0)");
1322 module_param(mss_base, int, 0);
1323 MODULE_PARM_DESC(mss_base, "MSS emulation I/O base address (0x530 0xE80)");
1324 module_param(mpu_base, int, 0);
1325 MODULE_PARM_DESC(mpu_base,"MPU-401 I/O base address (0x300 0x310 0x320 0x330)");
1326 MODULE_AUTHOR("Riccardo Facchetti <fizban@tin.it>");
1327 MODULE_DESCRIPTION("Audio Excel DSP 16 Driver Version " VERSION);
1328 MODULE_LICENSE("GPL");
1329
1330 static int __init do_init_aedsp16(void) {
1331 printk("Audio Excel DSP 16 init driver Copyright (C) Riccardo Facchetti 1995-98\n");
1332 if (io == -1 || dma == -1 || irq == -1) {
1333 printk(KERN_INFO "aedsp16: I/O, IRQ and DMA are mandatory\n");
1334 return -EINVAL;
1335 }
1336
1337 ae_config.base_io = io;
1338 ae_config.irq = irq;
1339 ae_config.dma = dma;
1340
1341 ae_config.mss_base = mss_base;
1342 ae_config.mpu_base = mpu_base;
1343 ae_config.mpu_irq = mpu_irq;
1344
1345 if (init_aedsp16() == FALSE) {
1346 printk(KERN_ERR "aedsp16: initialization failed\n");
1347 /*
1348 * XXX
1349 * What error should we return here ?
1350 */
1351 return -EINVAL;
1352 }
1353 return 0;
1354 }
1355
1356 static void __exit cleanup_aedsp16(void) {
1357 uninit_aedsp16();
1358 }
1359
1360 module_init(do_init_aedsp16);
1361 module_exit(cleanup_aedsp16);
1362
1363 #ifndef MODULE
1364 static int __init setup_aedsp16(char *str)
1365 {
1366 /* io, irq, dma, mss_io, mpu_io, mpu_irq */
1367 int ints[7];
1368
1369 str = get_options(str, ARRAY_SIZE(ints), ints);
1370
1371 io = ints[1];
1372 irq = ints[2];
1373 dma = ints[3];
1374 mss_base = ints[4];
1375 mpu_base = ints[5];
1376 mpu_irq = ints[6];
1377 return 1;
1378 }
1379
1380 __setup("aedsp16=", setup_aedsp16);
1381 #endif
SocketAccessConTroL development