i2c: Fix sparse warning in i2c.h
[linux-2.6/sactl.git] / include / asm-i386 / hpet.h
blobdddeedf504b70e048dbf7470875c7cea0e2fa482
2 #ifndef _I386_HPET_H
3 #define _I386_HPET_H
5 #ifdef CONFIG_HPET_TIMER
7 #include <linux/errno.h>
8 #include <linux/module.h>
9 #include <linux/sched.h>
10 #include <linux/kernel.h>
11 #include <linux/param.h>
12 #include <linux/string.h>
13 #include <linux/mm.h>
14 #include <linux/interrupt.h>
15 #include <linux/time.h>
16 #include <linux/delay.h>
17 #include <linux/init.h>
18 #include <linux/smp.h>
20 #include <asm/io.h>
21 #include <asm/smp.h>
22 #include <asm/irq.h>
23 #include <asm/msr.h>
24 #include <asm/delay.h>
25 #include <asm/mpspec.h>
26 #include <asm/uaccess.h>
27 #include <asm/processor.h>
29 #include <linux/timex.h>
32 * Documentation on HPET can be found at:
33 * http://www.intel.com/ial/home/sp/pcmmspec.htm
34 * ftp://download.intel.com/ial/home/sp/mmts098.pdf
37 #define HPET_MMAP_SIZE 1024
39 #define HPET_ID 0x000
40 #define HPET_PERIOD 0x004
41 #define HPET_CFG 0x010
42 #define HPET_STATUS 0x020
43 #define HPET_COUNTER 0x0f0
44 #define HPET_T0_CFG 0x100
45 #define HPET_T0_CMP 0x108
46 #define HPET_T0_ROUTE 0x110
47 #define HPET_T1_CFG 0x120
48 #define HPET_T1_CMP 0x128
49 #define HPET_T1_ROUTE 0x130
50 #define HPET_T2_CFG 0x140
51 #define HPET_T2_CMP 0x148
52 #define HPET_T2_ROUTE 0x150
54 #define HPET_ID_LEGSUP 0x00008000
55 #define HPET_ID_NUMBER 0x00001f00
56 #define HPET_ID_REV 0x000000ff
57 #define HPET_ID_NUMBER_SHIFT 8
59 #define HPET_CFG_ENABLE 0x001
60 #define HPET_CFG_LEGACY 0x002
61 #define HPET_LEGACY_8254 2
62 #define HPET_LEGACY_RTC 8
64 #define HPET_TN_ENABLE 0x004
65 #define HPET_TN_PERIODIC 0x008
66 #define HPET_TN_PERIODIC_CAP 0x010
67 #define HPET_TN_SETVAL 0x040
68 #define HPET_TN_32BIT 0x100
70 /* Use our own asm for 64 bit multiply/divide */
71 #define ASM_MUL64_REG(eax_out,edx_out,reg_in,eax_in) \
72 __asm__ __volatile__("mull %2" \
73 :"=a" (eax_out), "=d" (edx_out) \
74 :"r" (reg_in), "0" (eax_in))
76 #define ASM_DIV64_REG(eax_out,edx_out,reg_in,eax_in,edx_in) \
77 __asm__ __volatile__("divl %2" \
78 :"=a" (eax_out), "=d" (edx_out) \
79 :"r" (reg_in), "0" (eax_in), "1" (edx_in))
81 #define KERNEL_TICK_USEC (1000000UL/HZ) /* tick value in microsec */
82 /* Max HPET Period is 10^8 femto sec as in HPET spec */
83 #define HPET_MAX_PERIOD (100000000UL)
85 * Min HPET period is 10^5 femto sec just for safety. If it is less than this,
86 * then 32 bit HPET counter wrapsaround in less than 0.5 sec.
88 #define HPET_MIN_PERIOD (100000UL)
89 #define HPET_TICK_RATE (HZ * 100000UL)
91 extern unsigned long hpet_address; /* hpet memory map physical address */
92 extern int is_hpet_enabled(void);
94 #ifdef CONFIG_X86_64
95 extern unsigned long hpet_tick; /* hpet clks count per tick */
96 extern int hpet_use_timer;
97 extern int hpet_rtc_timer_init(void);
98 extern int hpet_enable(void);
99 extern int is_hpet_capable(void);
100 extern int hpet_readl(unsigned long a);
101 #else
102 extern int hpet_enable(void);
103 #endif
105 #ifdef CONFIG_HPET_EMULATE_RTC
106 extern int hpet_mask_rtc_irq_bit(unsigned long bit_mask);
107 extern int hpet_set_rtc_irq_bit(unsigned long bit_mask);
108 extern int hpet_set_alarm_time(unsigned char hrs, unsigned char min, unsigned char sec);
109 extern int hpet_set_periodic_freq(unsigned long freq);
110 extern int hpet_rtc_dropped_irq(void);
111 extern int hpet_rtc_timer_init(void);
112 extern irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id);
113 #endif /* CONFIG_HPET_EMULATE_RTC */
115 #else
117 static inline int hpet_enable(void) { return 0; }
119 #endif /* CONFIG_HPET_TIMER */
120 #endif /* _I386_HPET_H */