fs3270: remove extra locks
[linux-2.6/sactl.git] / fs / ubifs / ubifs-media.h
bloba9ecbd9af20dbeb9a0ddefccd21f8b7393ba1d0a
1 /*
2 * This file is part of UBIFS.
4 * Copyright (C) 2006-2008 Nokia Corporation.
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License version 2 as published by
8 * the Free Software Foundation.
10 * This program is distributed in the hope that it will be useful, but WITHOUT
11 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
13 * more details.
15 * You should have received a copy of the GNU General Public License along with
16 * this program; if not, write to the Free Software Foundation, Inc., 51
17 * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
19 * Authors: Artem Bityutskiy (Битюцкий Артём)
20 * Adrian Hunter
24 * This file describes UBIFS on-flash format and contains definitions of all the
25 * relevant data structures and constants.
27 * All UBIFS on-flash objects are stored in the form of nodes. All nodes start
28 * with the UBIFS node magic number and have the same common header. Nodes
29 * always sit at 8-byte aligned positions on the media and node header sizes are
30 * also 8-byte aligned (except for the indexing node and the padding node).
33 #ifndef __UBIFS_MEDIA_H__
34 #define __UBIFS_MEDIA_H__
36 /* UBIFS node magic number (must not have the padding byte first or last) */
37 #define UBIFS_NODE_MAGIC 0x06101831
39 /* UBIFS on-flash format version */
40 #define UBIFS_FORMAT_VERSION 4
42 /* Minimum logical eraseblock size in bytes */
43 #define UBIFS_MIN_LEB_SZ (15*1024)
45 /* Initial CRC32 value used when calculating CRC checksums */
46 #define UBIFS_CRC32_INIT 0xFFFFFFFFU
49 * UBIFS does not try to compress data if its length is less than the below
50 * constant.
52 #define UBIFS_MIN_COMPR_LEN 128
54 /* Root inode number */
55 #define UBIFS_ROOT_INO 1
57 /* Lowest inode number used for regular inodes (not UBIFS-only internal ones) */
58 #define UBIFS_FIRST_INO 64
61 * Maximum file name and extended attribute length (must be a multiple of 8,
62 * minus 1).
64 #define UBIFS_MAX_NLEN 255
66 /* Maximum number of data journal heads */
67 #define UBIFS_MAX_JHEADS 1
70 * Size of UBIFS data block. Note, UBIFS is not a block oriented file-system,
71 * which means that it does not treat the underlying media as consisting of
72 * blocks like in case of hard drives. Do not be confused. UBIFS block is just
73 * the maximum amount of data which one data node can have or which can be
74 * attached to an inode node.
76 #define UBIFS_BLOCK_SIZE 4096
77 #define UBIFS_BLOCK_SHIFT 12
78 #define UBIFS_BLOCK_MASK 0x00000FFF
80 /* UBIFS padding byte pattern (must not be first or last byte of node magic) */
81 #define UBIFS_PADDING_BYTE 0xCE
83 /* Maximum possible key length */
84 #define UBIFS_MAX_KEY_LEN 16
86 /* Key length ("simple" format) */
87 #define UBIFS_SK_LEN 8
89 /* Minimum index tree fanout */
90 #define UBIFS_MIN_FANOUT 3
92 /* Maximum number of levels in UBIFS indexing B-tree */
93 #define UBIFS_MAX_LEVELS 512
95 /* Maximum amount of data attached to an inode in bytes */
96 #define UBIFS_MAX_INO_DATA UBIFS_BLOCK_SIZE
98 /* LEB Properties Tree fanout (must be power of 2) and fanout shift */
99 #define UBIFS_LPT_FANOUT 4
100 #define UBIFS_LPT_FANOUT_SHIFT 2
102 /* LEB Properties Tree bit field sizes */
103 #define UBIFS_LPT_CRC_BITS 16
104 #define UBIFS_LPT_CRC_BYTES 2
105 #define UBIFS_LPT_TYPE_BITS 4
107 /* The key is always at the same position in all keyed nodes */
108 #define UBIFS_KEY_OFFSET offsetof(struct ubifs_ino_node, key)
111 * LEB Properties Tree node types.
113 * UBIFS_LPT_PNODE: LPT leaf node (contains LEB properties)
114 * UBIFS_LPT_NNODE: LPT internal node
115 * UBIFS_LPT_LTAB: LPT's own lprops table
116 * UBIFS_LPT_LSAVE: LPT's save table (big model only)
117 * UBIFS_LPT_NODE_CNT: count of LPT node types
118 * UBIFS_LPT_NOT_A_NODE: all ones (15 for 4 bits) is never a valid node type
120 enum {
121 UBIFS_LPT_PNODE,
122 UBIFS_LPT_NNODE,
123 UBIFS_LPT_LTAB,
124 UBIFS_LPT_LSAVE,
125 UBIFS_LPT_NODE_CNT,
126 UBIFS_LPT_NOT_A_NODE = (1 << UBIFS_LPT_TYPE_BITS) - 1,
130 * UBIFS inode types.
132 * UBIFS_ITYPE_REG: regular file
133 * UBIFS_ITYPE_DIR: directory
134 * UBIFS_ITYPE_LNK: soft link
135 * UBIFS_ITYPE_BLK: block device node
136 * UBIFS_ITYPE_CHR: character device node
137 * UBIFS_ITYPE_FIFO: fifo
138 * UBIFS_ITYPE_SOCK: socket
139 * UBIFS_ITYPES_CNT: count of supported file types
141 enum {
142 UBIFS_ITYPE_REG,
143 UBIFS_ITYPE_DIR,
144 UBIFS_ITYPE_LNK,
145 UBIFS_ITYPE_BLK,
146 UBIFS_ITYPE_CHR,
147 UBIFS_ITYPE_FIFO,
148 UBIFS_ITYPE_SOCK,
149 UBIFS_ITYPES_CNT,
153 * Supported key hash functions.
155 * UBIFS_KEY_HASH_R5: R5 hash
156 * UBIFS_KEY_HASH_TEST: test hash which just returns first 4 bytes of the name
158 enum {
159 UBIFS_KEY_HASH_R5,
160 UBIFS_KEY_HASH_TEST,
164 * Supported key formats.
166 * UBIFS_SIMPLE_KEY_FMT: simple key format
168 enum {
169 UBIFS_SIMPLE_KEY_FMT,
173 * The simple key format uses 29 bits for storing UBIFS block number and hash
174 * value.
176 #define UBIFS_S_KEY_BLOCK_BITS 29
177 #define UBIFS_S_KEY_BLOCK_MASK 0x1FFFFFFF
178 #define UBIFS_S_KEY_HASH_BITS UBIFS_S_KEY_BLOCK_BITS
179 #define UBIFS_S_KEY_HASH_MASK UBIFS_S_KEY_BLOCK_MASK
182 * Key types.
184 * UBIFS_INO_KEY: inode node key
185 * UBIFS_DATA_KEY: data node key
186 * UBIFS_DENT_KEY: directory entry node key
187 * UBIFS_XENT_KEY: extended attribute entry key
188 * UBIFS_KEY_TYPES_CNT: number of supported key types
190 enum {
191 UBIFS_INO_KEY,
192 UBIFS_DATA_KEY,
193 UBIFS_DENT_KEY,
194 UBIFS_XENT_KEY,
195 UBIFS_KEY_TYPES_CNT,
198 /* Count of LEBs reserved for the superblock area */
199 #define UBIFS_SB_LEBS 1
200 /* Count of LEBs reserved for the master area */
201 #define UBIFS_MST_LEBS 2
203 /* First LEB of the superblock area */
204 #define UBIFS_SB_LNUM 0
205 /* First LEB of the master area */
206 #define UBIFS_MST_LNUM (UBIFS_SB_LNUM + UBIFS_SB_LEBS)
207 /* First LEB of the log area */
208 #define UBIFS_LOG_LNUM (UBIFS_MST_LNUM + UBIFS_MST_LEBS)
211 * The below constants define the absolute minimum values for various UBIFS
212 * media areas. Many of them actually depend of flash geometry and the FS
213 * configuration (number of journal heads, orphan LEBs, etc). This means that
214 * the smallest volume size which can be used for UBIFS cannot be pre-defined
215 * by these constants. The file-system that meets the below limitation will not
216 * necessarily mount. UBIFS does run-time calculations and validates the FS
217 * size.
220 /* Minimum number of logical eraseblocks in the log */
221 #define UBIFS_MIN_LOG_LEBS 2
222 /* Minimum number of bud logical eraseblocks (one for each head) */
223 #define UBIFS_MIN_BUD_LEBS 3
224 /* Minimum number of journal logical eraseblocks */
225 #define UBIFS_MIN_JNL_LEBS (UBIFS_MIN_LOG_LEBS + UBIFS_MIN_BUD_LEBS)
226 /* Minimum number of LPT area logical eraseblocks */
227 #define UBIFS_MIN_LPT_LEBS 2
228 /* Minimum number of orphan area logical eraseblocks */
229 #define UBIFS_MIN_ORPH_LEBS 1
231 * Minimum number of main area logical eraseblocks (buds, 3 for the index, 1
232 * for GC, 1 for deletions, and at least 1 for committed data).
234 #define UBIFS_MIN_MAIN_LEBS (UBIFS_MIN_BUD_LEBS + 6)
236 /* Minimum number of logical eraseblocks */
237 #define UBIFS_MIN_LEB_CNT (UBIFS_SB_LEBS + UBIFS_MST_LEBS + \
238 UBIFS_MIN_LOG_LEBS + UBIFS_MIN_LPT_LEBS + \
239 UBIFS_MIN_ORPH_LEBS + UBIFS_MIN_MAIN_LEBS)
241 /* Node sizes (N.B. these are guaranteed to be multiples of 8) */
242 #define UBIFS_CH_SZ sizeof(struct ubifs_ch)
243 #define UBIFS_INO_NODE_SZ sizeof(struct ubifs_ino_node)
244 #define UBIFS_DATA_NODE_SZ sizeof(struct ubifs_data_node)
245 #define UBIFS_DENT_NODE_SZ sizeof(struct ubifs_dent_node)
246 #define UBIFS_TRUN_NODE_SZ sizeof(struct ubifs_trun_node)
247 #define UBIFS_PAD_NODE_SZ sizeof(struct ubifs_pad_node)
248 #define UBIFS_SB_NODE_SZ sizeof(struct ubifs_sb_node)
249 #define UBIFS_MST_NODE_SZ sizeof(struct ubifs_mst_node)
250 #define UBIFS_REF_NODE_SZ sizeof(struct ubifs_ref_node)
251 #define UBIFS_IDX_NODE_SZ sizeof(struct ubifs_idx_node)
252 #define UBIFS_CS_NODE_SZ sizeof(struct ubifs_cs_node)
253 #define UBIFS_ORPH_NODE_SZ sizeof(struct ubifs_orph_node)
254 /* Extended attribute entry nodes are identical to directory entry nodes */
255 #define UBIFS_XENT_NODE_SZ UBIFS_DENT_NODE_SZ
256 /* Only this does not have to be multiple of 8 bytes */
257 #define UBIFS_BRANCH_SZ sizeof(struct ubifs_branch)
259 /* Maximum node sizes (N.B. these are guaranteed to be multiples of 8) */
260 #define UBIFS_MAX_DATA_NODE_SZ (UBIFS_DATA_NODE_SZ + UBIFS_BLOCK_SIZE)
261 #define UBIFS_MAX_INO_NODE_SZ (UBIFS_INO_NODE_SZ + UBIFS_MAX_INO_DATA)
262 #define UBIFS_MAX_DENT_NODE_SZ (UBIFS_DENT_NODE_SZ + UBIFS_MAX_NLEN + 1)
263 #define UBIFS_MAX_XENT_NODE_SZ UBIFS_MAX_DENT_NODE_SZ
265 /* The largest UBIFS node */
266 #define UBIFS_MAX_NODE_SZ UBIFS_MAX_INO_NODE_SZ
269 * On-flash inode flags.
271 * UBIFS_COMPR_FL: use compression for this inode
272 * UBIFS_SYNC_FL: I/O on this inode has to be synchronous
273 * UBIFS_IMMUTABLE_FL: inode is immutable
274 * UBIFS_APPEND_FL: writes to the inode may only append data
275 * UBIFS_DIRSYNC_FL: I/O on this directory inode has to be synchronous
276 * UBIFS_XATTR_FL: this inode is the inode for an extended attribute value
278 * Note, these are on-flash flags which correspond to ioctl flags
279 * (@FS_COMPR_FL, etc). They have the same values now, but generally, do not
280 * have to be the same.
282 enum {
283 UBIFS_COMPR_FL = 0x01,
284 UBIFS_SYNC_FL = 0x02,
285 UBIFS_IMMUTABLE_FL = 0x04,
286 UBIFS_APPEND_FL = 0x08,
287 UBIFS_DIRSYNC_FL = 0x10,
288 UBIFS_XATTR_FL = 0x20,
291 /* Inode flag bits used by UBIFS */
292 #define UBIFS_FL_MASK 0x0000001F
295 * UBIFS compression algorithms.
297 * UBIFS_COMPR_NONE: no compression
298 * UBIFS_COMPR_LZO: LZO compression
299 * UBIFS_COMPR_ZLIB: ZLIB compression
300 * UBIFS_COMPR_TYPES_CNT: count of supported compression types
302 enum {
303 UBIFS_COMPR_NONE,
304 UBIFS_COMPR_LZO,
305 UBIFS_COMPR_ZLIB,
306 UBIFS_COMPR_TYPES_CNT,
310 * UBIFS node types.
312 * UBIFS_INO_NODE: inode node
313 * UBIFS_DATA_NODE: data node
314 * UBIFS_DENT_NODE: directory entry node
315 * UBIFS_XENT_NODE: extended attribute node
316 * UBIFS_TRUN_NODE: truncation node
317 * UBIFS_PAD_NODE: padding node
318 * UBIFS_SB_NODE: superblock node
319 * UBIFS_MST_NODE: master node
320 * UBIFS_REF_NODE: LEB reference node
321 * UBIFS_IDX_NODE: index node
322 * UBIFS_CS_NODE: commit start node
323 * UBIFS_ORPH_NODE: orphan node
324 * UBIFS_NODE_TYPES_CNT: count of supported node types
326 * Note, we index arrays by these numbers, so keep them low and contiguous.
327 * Node type constants for inodes, direntries and so on have to be the same as
328 * corresponding key type constants.
330 enum {
331 UBIFS_INO_NODE,
332 UBIFS_DATA_NODE,
333 UBIFS_DENT_NODE,
334 UBIFS_XENT_NODE,
335 UBIFS_TRUN_NODE,
336 UBIFS_PAD_NODE,
337 UBIFS_SB_NODE,
338 UBIFS_MST_NODE,
339 UBIFS_REF_NODE,
340 UBIFS_IDX_NODE,
341 UBIFS_CS_NODE,
342 UBIFS_ORPH_NODE,
343 UBIFS_NODE_TYPES_CNT,
347 * Master node flags.
349 * UBIFS_MST_DIRTY: rebooted uncleanly - master node is dirty
350 * UBIFS_MST_NO_ORPHS: no orphan inodes present
351 * UBIFS_MST_RCVRY: written by recovery
353 enum {
354 UBIFS_MST_DIRTY = 1,
355 UBIFS_MST_NO_ORPHS = 2,
356 UBIFS_MST_RCVRY = 4,
360 * Node group type (used by recovery to recover whole group or none).
362 * UBIFS_NO_NODE_GROUP: this node is not part of a group
363 * UBIFS_IN_NODE_GROUP: this node is a part of a group
364 * UBIFS_LAST_OF_NODE_GROUP: this node is the last in a group
366 enum {
367 UBIFS_NO_NODE_GROUP = 0,
368 UBIFS_IN_NODE_GROUP,
369 UBIFS_LAST_OF_NODE_GROUP,
373 * Superblock flags.
375 * UBIFS_FLG_BIGLPT: if "big" LPT model is used if set
377 enum {
378 UBIFS_FLG_BIGLPT = 0x02,
382 * struct ubifs_ch - common header node.
383 * @magic: UBIFS node magic number (%UBIFS_NODE_MAGIC)
384 * @crc: CRC-32 checksum of the node header
385 * @sqnum: sequence number
386 * @len: full node length
387 * @node_type: node type
388 * @group_type: node group type
389 * @padding: reserved for future, zeroes
391 * Every UBIFS node starts with this common part. If the node has a key, the
392 * key always goes next.
394 struct ubifs_ch {
395 __le32 magic;
396 __le32 crc;
397 __le64 sqnum;
398 __le32 len;
399 __u8 node_type;
400 __u8 group_type;
401 __u8 padding[2];
402 } __attribute__ ((packed));
405 * union ubifs_dev_desc - device node descriptor.
406 * @new: new type device descriptor
407 * @huge: huge type device descriptor
409 * This data structure describes major/minor numbers of a device node. In an
410 * inode is a device node then its data contains an object of this type. UBIFS
411 * uses standard Linux "new" and "huge" device node encodings.
413 union ubifs_dev_desc {
414 __le32 new;
415 __le64 huge;
416 } __attribute__ ((packed));
419 * struct ubifs_ino_node - inode node.
420 * @ch: common header
421 * @key: node key
422 * @creat_sqnum: sequence number at time of creation
423 * @size: inode size in bytes (amount of uncompressed data)
424 * @atime_sec: access time seconds
425 * @ctime_sec: creation time seconds
426 * @mtime_sec: modification time seconds
427 * @atime_nsec: access time nanoseconds
428 * @ctime_nsec: creation time nanoseconds
429 * @mtime_nsec: modification time nanoseconds
430 * @nlink: number of hard links
431 * @uid: owner ID
432 * @gid: group ID
433 * @mode: access flags
434 * @flags: per-inode flags (%UBIFS_COMPR_FL, %UBIFS_SYNC_FL, etc)
435 * @data_len: inode data length
436 * @xattr_cnt: count of extended attributes this inode has
437 * @xattr_size: summarized size of all extended attributes in bytes
438 * @padding1: reserved for future, zeroes
439 * @xattr_names: sum of lengths of all extended attribute names belonging to
440 * this inode
441 * @compr_type: compression type used for this inode
442 * @padding2: reserved for future, zeroes
443 * @data: data attached to the inode
445 * Note, even though inode compression type is defined by @compr_type, some
446 * nodes of this inode may be compressed with different compressor - this
447 * happens if compression type is changed while the inode already has data
448 * nodes. But @compr_type will be use for further writes to the inode.
450 * Note, do not forget to amend 'zero_ino_node_unused()' function when changing
451 * the padding fields.
453 struct ubifs_ino_node {
454 struct ubifs_ch ch;
455 __u8 key[UBIFS_MAX_KEY_LEN];
456 __le64 creat_sqnum;
457 __le64 size;
458 __le64 atime_sec;
459 __le64 ctime_sec;
460 __le64 mtime_sec;
461 __le32 atime_nsec;
462 __le32 ctime_nsec;
463 __le32 mtime_nsec;
464 __le32 nlink;
465 __le32 uid;
466 __le32 gid;
467 __le32 mode;
468 __le32 flags;
469 __le32 data_len;
470 __le32 xattr_cnt;
471 __le32 xattr_size;
472 __u8 padding1[4]; /* Watch 'zero_ino_node_unused()' if changing! */
473 __le32 xattr_names;
474 __le16 compr_type;
475 __u8 padding2[26]; /* Watch 'zero_ino_node_unused()' if changing! */
476 __u8 data[];
477 } __attribute__ ((packed));
480 * struct ubifs_dent_node - directory entry node.
481 * @ch: common header
482 * @key: node key
483 * @inum: target inode number
484 * @padding1: reserved for future, zeroes
485 * @type: type of the target inode (%UBIFS_ITYPE_REG, %UBIFS_ITYPE_DIR, etc)
486 * @nlen: name length
487 * @padding2: reserved for future, zeroes
488 * @name: zero-terminated name
490 * Note, do not forget to amend 'zero_dent_node_unused()' function when
491 * changing the padding fields.
493 struct ubifs_dent_node {
494 struct ubifs_ch ch;
495 __u8 key[UBIFS_MAX_KEY_LEN];
496 __le64 inum;
497 __u8 padding1;
498 __u8 type;
499 __le16 nlen;
500 __u8 padding2[4]; /* Watch 'zero_dent_node_unused()' if changing! */
501 __u8 name[];
502 } __attribute__ ((packed));
505 * struct ubifs_data_node - data node.
506 * @ch: common header
507 * @key: node key
508 * @size: uncompressed data size in bytes
509 * @compr_type: compression type (%UBIFS_COMPR_NONE, %UBIFS_COMPR_LZO, etc)
510 * @padding: reserved for future, zeroes
511 * @data: data
513 * Note, do not forget to amend 'zero_data_node_unused()' function when
514 * changing the padding fields.
516 struct ubifs_data_node {
517 struct ubifs_ch ch;
518 __u8 key[UBIFS_MAX_KEY_LEN];
519 __le32 size;
520 __le16 compr_type;
521 __u8 padding[2]; /* Watch 'zero_data_node_unused()' if changing! */
522 __u8 data[];
523 } __attribute__ ((packed));
526 * struct ubifs_trun_node - truncation node.
527 * @ch: common header
528 * @inum: truncated inode number
529 * @padding: reserved for future, zeroes
530 * @old_size: size before truncation
531 * @new_size: size after truncation
533 * This node exists only in the journal and never goes to the main area. Note,
534 * do not forget to amend 'zero_trun_node_unused()' function when changing the
535 * padding fields.
537 struct ubifs_trun_node {
538 struct ubifs_ch ch;
539 __le32 inum;
540 __u8 padding[12]; /* Watch 'zero_trun_node_unused()' if changing! */
541 __le64 old_size;
542 __le64 new_size;
543 } __attribute__ ((packed));
546 * struct ubifs_pad_node - padding node.
547 * @ch: common header
548 * @pad_len: how many bytes after this node are unused (because padded)
549 * @padding: reserved for future, zeroes
551 struct ubifs_pad_node {
552 struct ubifs_ch ch;
553 __le32 pad_len;
554 } __attribute__ ((packed));
557 * struct ubifs_sb_node - superblock node.
558 * @ch: common header
559 * @padding: reserved for future, zeroes
560 * @key_hash: type of hash function used in keys
561 * @key_fmt: format of the key
562 * @flags: file-system flags (%UBIFS_FLG_BIGLPT, etc)
563 * @min_io_size: minimal input/output unit size
564 * @leb_size: logical eraseblock size in bytes
565 * @leb_cnt: count of LEBs used by file-system
566 * @max_leb_cnt: maximum count of LEBs used by file-system
567 * @max_bud_bytes: maximum amount of data stored in buds
568 * @log_lebs: log size in logical eraseblocks
569 * @lpt_lebs: number of LEBs used for lprops table
570 * @orph_lebs: number of LEBs used for recording orphans
571 * @jhead_cnt: count of journal heads
572 * @fanout: tree fanout (max. number of links per indexing node)
573 * @lsave_cnt: number of LEB numbers in LPT's save table
574 * @fmt_version: UBIFS on-flash format version
575 * @default_compr: default compression algorithm (%UBIFS_COMPR_LZO, etc)
576 * @padding1: reserved for future, zeroes
577 * @rp_uid: reserve pool UID
578 * @rp_gid: reserve pool GID
579 * @rp_size: size of the reserved pool in bytes
580 * @padding2: reserved for future, zeroes
581 * @time_gran: time granularity in nanoseconds
582 * @uuid: UUID generated when the file system image was created
584 struct ubifs_sb_node {
585 struct ubifs_ch ch;
586 __u8 padding[2];
587 __u8 key_hash;
588 __u8 key_fmt;
589 __le32 flags;
590 __le32 min_io_size;
591 __le32 leb_size;
592 __le32 leb_cnt;
593 __le32 max_leb_cnt;
594 __le64 max_bud_bytes;
595 __le32 log_lebs;
596 __le32 lpt_lebs;
597 __le32 orph_lebs;
598 __le32 jhead_cnt;
599 __le32 fanout;
600 __le32 lsave_cnt;
601 __le32 fmt_version;
602 __le16 default_compr;
603 __u8 padding1[2];
604 __le32 rp_uid;
605 __le32 rp_gid;
606 __le64 rp_size;
607 __le32 time_gran;
608 __u8 uuid[16];
609 __u8 padding2[3972];
610 } __attribute__ ((packed));
613 * struct ubifs_mst_node - master node.
614 * @ch: common header
615 * @highest_inum: highest inode number in the committed index
616 * @cmt_no: commit number
617 * @flags: various flags (%UBIFS_MST_DIRTY, etc)
618 * @log_lnum: start of the log
619 * @root_lnum: LEB number of the root indexing node
620 * @root_offs: offset within @root_lnum
621 * @root_len: root indexing node length
622 * @gc_lnum: LEB reserved for garbage collection (%-1 value means the LEB was
623 * not reserved and should be reserved on mount)
624 * @ihead_lnum: LEB number of index head
625 * @ihead_offs: offset of index head
626 * @index_size: size of index on flash
627 * @total_free: total free space in bytes
628 * @total_dirty: total dirty space in bytes
629 * @total_used: total used space in bytes (includes only data LEBs)
630 * @total_dead: total dead space in bytes (includes only data LEBs)
631 * @total_dark: total dark space in bytes (includes only data LEBs)
632 * @lpt_lnum: LEB number of LPT root nnode
633 * @lpt_offs: offset of LPT root nnode
634 * @nhead_lnum: LEB number of LPT head
635 * @nhead_offs: offset of LPT head
636 * @ltab_lnum: LEB number of LPT's own lprops table
637 * @ltab_offs: offset of LPT's own lprops table
638 * @lsave_lnum: LEB number of LPT's save table (big model only)
639 * @lsave_offs: offset of LPT's save table (big model only)
640 * @lscan_lnum: LEB number of last LPT scan
641 * @empty_lebs: number of empty logical eraseblocks
642 * @idx_lebs: number of indexing logical eraseblocks
643 * @leb_cnt: count of LEBs used by file-system
644 * @padding: reserved for future, zeroes
646 struct ubifs_mst_node {
647 struct ubifs_ch ch;
648 __le64 highest_inum;
649 __le64 cmt_no;
650 __le32 flags;
651 __le32 log_lnum;
652 __le32 root_lnum;
653 __le32 root_offs;
654 __le32 root_len;
655 __le32 gc_lnum;
656 __le32 ihead_lnum;
657 __le32 ihead_offs;
658 __le64 index_size;
659 __le64 total_free;
660 __le64 total_dirty;
661 __le64 total_used;
662 __le64 total_dead;
663 __le64 total_dark;
664 __le32 lpt_lnum;
665 __le32 lpt_offs;
666 __le32 nhead_lnum;
667 __le32 nhead_offs;
668 __le32 ltab_lnum;
669 __le32 ltab_offs;
670 __le32 lsave_lnum;
671 __le32 lsave_offs;
672 __le32 lscan_lnum;
673 __le32 empty_lebs;
674 __le32 idx_lebs;
675 __le32 leb_cnt;
676 __u8 padding[344];
677 } __attribute__ ((packed));
680 * struct ubifs_ref_node - logical eraseblock reference node.
681 * @ch: common header
682 * @lnum: the referred logical eraseblock number
683 * @offs: start offset in the referred LEB
684 * @jhead: journal head number
685 * @padding: reserved for future, zeroes
687 struct ubifs_ref_node {
688 struct ubifs_ch ch;
689 __le32 lnum;
690 __le32 offs;
691 __le32 jhead;
692 __u8 padding[28];
693 } __attribute__ ((packed));
696 * struct ubifs_branch - key/reference/length branch
697 * @lnum: LEB number of the target node
698 * @offs: offset within @lnum
699 * @len: target node length
700 * @key: key
702 struct ubifs_branch {
703 __le32 lnum;
704 __le32 offs;
705 __le32 len;
706 __u8 key[];
707 } __attribute__ ((packed));
710 * struct ubifs_idx_node - indexing node.
711 * @ch: common header
712 * @child_cnt: number of child index nodes
713 * @level: tree level
714 * @branches: LEB number / offset / length / key branches
716 struct ubifs_idx_node {
717 struct ubifs_ch ch;
718 __le16 child_cnt;
719 __le16 level;
720 __u8 branches[];
721 } __attribute__ ((packed));
724 * struct ubifs_cs_node - commit start node.
725 * @ch: common header
726 * @cmt_no: commit number
728 struct ubifs_cs_node {
729 struct ubifs_ch ch;
730 __le64 cmt_no;
731 } __attribute__ ((packed));
734 * struct ubifs_orph_node - orphan node.
735 * @ch: common header
736 * @cmt_no: commit number (also top bit is set on the last node of the commit)
737 * @inos: inode numbers of orphans
739 struct ubifs_orph_node {
740 struct ubifs_ch ch;
741 __le64 cmt_no;
742 __le64 inos[];
743 } __attribute__ ((packed));
745 #endif /* __UBIFS_MEDIA_H__ */