1 /*****************************************************************************/
4 * stallion.c -- stallion multiport serial driver.
6 * Copyright (C) 1996-1999 Stallion Technologies
7 * Copyright (C) 1994-1996 Greg Ungerer.
9 * This code is loosely based on the Linux serial driver, written by
10 * Linus Torvalds, Theodore T'so and others.
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License as published by
14 * the Free Software Foundation; either version 2 of the License, or
15 * (at your option) any later version.
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
27 /*****************************************************************************/
29 #include <linux/module.h>
30 #include <linux/slab.h>
31 #include <linux/interrupt.h>
32 #include <linux/tty.h>
33 #include <linux/tty_flip.h>
34 #include <linux/serial.h>
35 #include <linux/cd1400.h>
36 #include <linux/sc26198.h>
37 #include <linux/comstats.h>
38 #include <linux/stallion.h>
39 #include <linux/ioport.h>
40 #include <linux/init.h>
41 #include <linux/smp_lock.h>
42 #include <linux/device.h>
43 #include <linux/delay.h>
44 #include <linux/ctype.h>
47 #include <asm/uaccess.h>
49 #include <linux/pci.h>
51 /*****************************************************************************/
54 * Define different board types. Use the standard Stallion "assigned"
55 * board numbers. Boards supported in this driver are abbreviated as
56 * EIO = EasyIO and ECH = EasyConnection 8/32.
62 #define BRD_ECH64PCI 27
63 #define BRD_EASYIOPCI 28
69 unsigned long memaddr
;
74 static unsigned int stl_nrbrds
;
76 /*****************************************************************************/
79 * Define some important driver characteristics. Device major numbers
80 * allocated as per Linux Device Registry.
82 #ifndef STL_SIOMEMMAJOR
83 #define STL_SIOMEMMAJOR 28
85 #ifndef STL_SERIALMAJOR
86 #define STL_SERIALMAJOR 24
88 #ifndef STL_CALLOUTMAJOR
89 #define STL_CALLOUTMAJOR 25
93 * Set the TX buffer size. Bigger is better, but we don't want
94 * to chew too much memory with buffers!
96 #define STL_TXBUFLOW 512
97 #define STL_TXBUFSIZE 4096
99 /*****************************************************************************/
102 * Define our local driver identity first. Set up stuff to deal with
103 * all the local structures required by a serial tty driver.
105 static char *stl_drvtitle
= "Stallion Multiport Serial Driver";
106 static char *stl_drvname
= "stallion";
107 static char *stl_drvversion
= "5.6.0";
109 static struct tty_driver
*stl_serial
;
112 * Define a local default termios struct. All ports will be created
113 * with this termios initially. Basically all it defines is a raw port
114 * at 9600, 8 data bits, 1 stop bit.
116 static struct ktermios stl_deftermios
= {
117 .c_cflag
= (B9600
| CS8
| CREAD
| HUPCL
| CLOCAL
),
124 * Define global place to put buffer overflow characters.
126 static char stl_unwanted
[SC26198_RXFIFOSIZE
];
128 /*****************************************************************************/
130 static DEFINE_MUTEX(stl_brdslock
);
131 static struct stlbrd
*stl_brds
[STL_MAXBRDS
];
134 * Per board state flags. Used with the state field of the board struct.
135 * Not really much here!
137 #define BRD_FOUND 0x1
138 #define STL_PROBED 0x2
142 * Define the port structure istate flags. These set of flags are
143 * modified at interrupt time - so setting and reseting them needs
144 * to be atomic. Use the bit clear/setting routines for this.
146 #define ASYI_TXBUSY 1
148 #define ASYI_TXFLOWED 3
151 * Define an array of board names as printable strings. Handy for
152 * referencing boards when printing trace and stuff.
154 static char *stl_brdnames
[] = {
186 /*****************************************************************************/
189 * Define some string labels for arguments passed from the module
190 * load line. These allow for easy board definitions, and easy
191 * modification of the io, memory and irq resoucres.
193 static unsigned int stl_nargs
;
194 static char *board0
[4];
195 static char *board1
[4];
196 static char *board2
[4];
197 static char *board3
[4];
199 static char **stl_brdsp
[] = {
207 * Define a set of common board names, and types. This is used to
208 * parse any module arguments.
215 { "easyio", BRD_EASYIO
},
216 { "eio", BRD_EASYIO
},
217 { "20", BRD_EASYIO
},
218 { "ec8/32", BRD_ECH
},
219 { "ec8/32-at", BRD_ECH
},
220 { "ec8/32-isa", BRD_ECH
},
222 { "echat", BRD_ECH
},
224 { "ec8/32-mc", BRD_ECHMC
},
225 { "ec8/32-mca", BRD_ECHMC
},
226 { "echmc", BRD_ECHMC
},
227 { "echmca", BRD_ECHMC
},
229 { "ec8/32-pc", BRD_ECHPCI
},
230 { "ec8/32-pci", BRD_ECHPCI
},
231 { "26", BRD_ECHPCI
},
232 { "ec8/64-pc", BRD_ECH64PCI
},
233 { "ec8/64-pci", BRD_ECH64PCI
},
234 { "ech-pci", BRD_ECH64PCI
},
235 { "echpci", BRD_ECH64PCI
},
236 { "echpc", BRD_ECH64PCI
},
237 { "27", BRD_ECH64PCI
},
238 { "easyio-pc", BRD_EASYIOPCI
},
239 { "easyio-pci", BRD_EASYIOPCI
},
240 { "eio-pci", BRD_EASYIOPCI
},
241 { "eiopci", BRD_EASYIOPCI
},
242 { "28", BRD_EASYIOPCI
},
246 * Define the module agruments.
249 module_param_array(board0
, charp
, &stl_nargs
, 0);
250 MODULE_PARM_DESC(board0
, "Board 0 config -> name[,ioaddr[,ioaddr2][,irq]]");
251 module_param_array(board1
, charp
, &stl_nargs
, 0);
252 MODULE_PARM_DESC(board1
, "Board 1 config -> name[,ioaddr[,ioaddr2][,irq]]");
253 module_param_array(board2
, charp
, &stl_nargs
, 0);
254 MODULE_PARM_DESC(board2
, "Board 2 config -> name[,ioaddr[,ioaddr2][,irq]]");
255 module_param_array(board3
, charp
, &stl_nargs
, 0);
256 MODULE_PARM_DESC(board3
, "Board 3 config -> name[,ioaddr[,ioaddr2][,irq]]");
258 /*****************************************************************************/
261 * Hardware ID bits for the EasyIO and ECH boards. These defines apply
262 * to the directly accessible io ports of these boards (not the uarts -
263 * they are in cd1400.h and sc26198.h).
265 #define EIO_8PORTRS 0x04
266 #define EIO_4PORTRS 0x05
267 #define EIO_8PORTDI 0x00
268 #define EIO_8PORTM 0x06
270 #define EIO_IDBITMASK 0x07
272 #define EIO_BRDMASK 0xf0
275 #define ID_BRD16 0x30
277 #define EIO_INTRPEND 0x08
278 #define EIO_INTEDGE 0x00
279 #define EIO_INTLEVEL 0x08
283 #define ECH_IDBITMASK 0xe0
284 #define ECH_BRDENABLE 0x08
285 #define ECH_BRDDISABLE 0x00
286 #define ECH_INTENABLE 0x01
287 #define ECH_INTDISABLE 0x00
288 #define ECH_INTLEVEL 0x02
289 #define ECH_INTEDGE 0x00
290 #define ECH_INTRPEND 0x01
291 #define ECH_BRDRESET 0x01
293 #define ECHMC_INTENABLE 0x01
294 #define ECHMC_BRDRESET 0x02
296 #define ECH_PNLSTATUS 2
297 #define ECH_PNL16PORT 0x20
298 #define ECH_PNLIDMASK 0x07
299 #define ECH_PNLXPID 0x40
300 #define ECH_PNLINTRPEND 0x80
302 #define ECH_ADDR2MASK 0x1e0
305 * Define the vector mapping bits for the programmable interrupt board
306 * hardware. These bits encode the interrupt for the board to use - it
307 * is software selectable (except the EIO-8M).
309 static unsigned char stl_vecmap
[] = {
310 0xff, 0xff, 0xff, 0x04, 0x06, 0x05, 0xff, 0x07,
311 0xff, 0xff, 0x00, 0x02, 0x01, 0xff, 0xff, 0x03
315 * Lock ordering is that you may not take stallion_lock holding
319 static spinlock_t brd_lock
; /* Guard the board mapping */
320 static spinlock_t stallion_lock
; /* Guard the tty driver */
323 * Set up enable and disable macros for the ECH boards. They require
324 * the secondary io address space to be activated and deactivated.
325 * This way all ECH boards can share their secondary io region.
326 * If this is an ECH-PCI board then also need to set the page pointer
327 * to point to the correct page.
329 #define BRDENABLE(brdnr,pagenr) \
330 if (stl_brds[(brdnr)]->brdtype == BRD_ECH) \
331 outb((stl_brds[(brdnr)]->ioctrlval | ECH_BRDENABLE), \
332 stl_brds[(brdnr)]->ioctrl); \
333 else if (stl_brds[(brdnr)]->brdtype == BRD_ECHPCI) \
334 outb((pagenr), stl_brds[(brdnr)]->ioctrl);
336 #define BRDDISABLE(brdnr) \
337 if (stl_brds[(brdnr)]->brdtype == BRD_ECH) \
338 outb((stl_brds[(brdnr)]->ioctrlval | ECH_BRDDISABLE), \
339 stl_brds[(brdnr)]->ioctrl);
341 #define STL_CD1400MAXBAUD 230400
342 #define STL_SC26198MAXBAUD 460800
344 #define STL_BAUDBASE 115200
345 #define STL_CLOSEDELAY (5 * HZ / 10)
347 /*****************************************************************************/
350 * Define the Stallion PCI vendor and device IDs.
352 #ifndef PCI_VENDOR_ID_STALLION
353 #define PCI_VENDOR_ID_STALLION 0x124d
355 #ifndef PCI_DEVICE_ID_ECHPCI832
356 #define PCI_DEVICE_ID_ECHPCI832 0x0000
358 #ifndef PCI_DEVICE_ID_ECHPCI864
359 #define PCI_DEVICE_ID_ECHPCI864 0x0002
361 #ifndef PCI_DEVICE_ID_EIOPCI
362 #define PCI_DEVICE_ID_EIOPCI 0x0003
366 * Define structure to hold all Stallion PCI boards.
369 static struct pci_device_id stl_pcibrds
[] = {
370 { PCI_DEVICE(PCI_VENDOR_ID_STALLION
, PCI_DEVICE_ID_ECHPCI864
),
371 .driver_data
= BRD_ECH64PCI
},
372 { PCI_DEVICE(PCI_VENDOR_ID_STALLION
, PCI_DEVICE_ID_EIOPCI
),
373 .driver_data
= BRD_EASYIOPCI
},
374 { PCI_DEVICE(PCI_VENDOR_ID_STALLION
, PCI_DEVICE_ID_ECHPCI832
),
375 .driver_data
= BRD_ECHPCI
},
376 { PCI_DEVICE(PCI_VENDOR_ID_NS
, PCI_DEVICE_ID_NS_87410
),
377 .driver_data
= BRD_ECHPCI
},
380 MODULE_DEVICE_TABLE(pci
, stl_pcibrds
);
382 /*****************************************************************************/
385 * Define macros to extract a brd/port number from a minor number.
387 #define MINOR2BRD(min) (((min) & 0xc0) >> 6)
388 #define MINOR2PORT(min) ((min) & 0x3f)
391 * Define a baud rate table that converts termios baud rate selector
392 * into the actual baud rate value. All baud rate calculations are
393 * based on the actual baud rate required.
395 static unsigned int stl_baudrates
[] = {
396 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
397 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600
400 /*****************************************************************************/
403 * Declare all those functions in this driver!
406 static int stl_memioctl(struct inode
*ip
, struct file
*fp
, unsigned int cmd
, unsigned long arg
);
407 static int stl_brdinit(struct stlbrd
*brdp
);
408 static int stl_getportstats(struct tty_struct
*tty
, struct stlport
*portp
, comstats_t __user
*cp
);
409 static int stl_clrportstats(struct stlport
*portp
, comstats_t __user
*cp
);
410 static int stl_waitcarrier(struct tty_struct
*tty
, struct stlport
*portp
, struct file
*filp
);
413 * CD1400 uart specific handling functions.
415 static void stl_cd1400setreg(struct stlport
*portp
, int regnr
, int value
);
416 static int stl_cd1400getreg(struct stlport
*portp
, int regnr
);
417 static int stl_cd1400updatereg(struct stlport
*portp
, int regnr
, int value
);
418 static int stl_cd1400panelinit(struct stlbrd
*brdp
, struct stlpanel
*panelp
);
419 static void stl_cd1400portinit(struct stlbrd
*brdp
, struct stlpanel
*panelp
, struct stlport
*portp
);
420 static void stl_cd1400setport(struct stlport
*portp
, struct ktermios
*tiosp
);
421 static int stl_cd1400getsignals(struct stlport
*portp
);
422 static void stl_cd1400setsignals(struct stlport
*portp
, int dtr
, int rts
);
423 static void stl_cd1400ccrwait(struct stlport
*portp
);
424 static void stl_cd1400enablerxtx(struct stlport
*portp
, int rx
, int tx
);
425 static void stl_cd1400startrxtx(struct stlport
*portp
, int rx
, int tx
);
426 static void stl_cd1400disableintrs(struct stlport
*portp
);
427 static void stl_cd1400sendbreak(struct stlport
*portp
, int len
);
428 static void stl_cd1400flowctrl(struct stlport
*portp
, int state
);
429 static void stl_cd1400sendflow(struct stlport
*portp
, int state
);
430 static void stl_cd1400flush(struct stlport
*portp
);
431 static int stl_cd1400datastate(struct stlport
*portp
);
432 static void stl_cd1400eiointr(struct stlpanel
*panelp
, unsigned int iobase
);
433 static void stl_cd1400echintr(struct stlpanel
*panelp
, unsigned int iobase
);
434 static void stl_cd1400txisr(struct stlpanel
*panelp
, int ioaddr
);
435 static void stl_cd1400rxisr(struct stlpanel
*panelp
, int ioaddr
);
436 static void stl_cd1400mdmisr(struct stlpanel
*panelp
, int ioaddr
);
438 static inline int stl_cd1400breakisr(struct stlport
*portp
, int ioaddr
);
441 * SC26198 uart specific handling functions.
443 static void stl_sc26198setreg(struct stlport
*portp
, int regnr
, int value
);
444 static int stl_sc26198getreg(struct stlport
*portp
, int regnr
);
445 static int stl_sc26198updatereg(struct stlport
*portp
, int regnr
, int value
);
446 static int stl_sc26198getglobreg(struct stlport
*portp
, int regnr
);
447 static int stl_sc26198panelinit(struct stlbrd
*brdp
, struct stlpanel
*panelp
);
448 static void stl_sc26198portinit(struct stlbrd
*brdp
, struct stlpanel
*panelp
, struct stlport
*portp
);
449 static void stl_sc26198setport(struct stlport
*portp
, struct ktermios
*tiosp
);
450 static int stl_sc26198getsignals(struct stlport
*portp
);
451 static void stl_sc26198setsignals(struct stlport
*portp
, int dtr
, int rts
);
452 static void stl_sc26198enablerxtx(struct stlport
*portp
, int rx
, int tx
);
453 static void stl_sc26198startrxtx(struct stlport
*portp
, int rx
, int tx
);
454 static void stl_sc26198disableintrs(struct stlport
*portp
);
455 static void stl_sc26198sendbreak(struct stlport
*portp
, int len
);
456 static void stl_sc26198flowctrl(struct stlport
*portp
, int state
);
457 static void stl_sc26198sendflow(struct stlport
*portp
, int state
);
458 static void stl_sc26198flush(struct stlport
*portp
);
459 static int stl_sc26198datastate(struct stlport
*portp
);
460 static void stl_sc26198wait(struct stlport
*portp
);
461 static void stl_sc26198txunflow(struct stlport
*portp
, struct tty_struct
*tty
);
462 static void stl_sc26198intr(struct stlpanel
*panelp
, unsigned int iobase
);
463 static void stl_sc26198txisr(struct stlport
*port
);
464 static void stl_sc26198rxisr(struct stlport
*port
, unsigned int iack
);
465 static void stl_sc26198rxbadch(struct stlport
*portp
, unsigned char status
, char ch
);
466 static void stl_sc26198rxbadchars(struct stlport
*portp
);
467 static void stl_sc26198otherisr(struct stlport
*port
, unsigned int iack
);
469 /*****************************************************************************/
472 * Generic UART support structure.
474 typedef struct uart
{
475 int (*panelinit
)(struct stlbrd
*brdp
, struct stlpanel
*panelp
);
476 void (*portinit
)(struct stlbrd
*brdp
, struct stlpanel
*panelp
, struct stlport
*portp
);
477 void (*setport
)(struct stlport
*portp
, struct ktermios
*tiosp
);
478 int (*getsignals
)(struct stlport
*portp
);
479 void (*setsignals
)(struct stlport
*portp
, int dtr
, int rts
);
480 void (*enablerxtx
)(struct stlport
*portp
, int rx
, int tx
);
481 void (*startrxtx
)(struct stlport
*portp
, int rx
, int tx
);
482 void (*disableintrs
)(struct stlport
*portp
);
483 void (*sendbreak
)(struct stlport
*portp
, int len
);
484 void (*flowctrl
)(struct stlport
*portp
, int state
);
485 void (*sendflow
)(struct stlport
*portp
, int state
);
486 void (*flush
)(struct stlport
*portp
);
487 int (*datastate
)(struct stlport
*portp
);
488 void (*intr
)(struct stlpanel
*panelp
, unsigned int iobase
);
492 * Define some macros to make calling these functions nice and clean.
494 #define stl_panelinit (* ((uart_t *) panelp->uartp)->panelinit)
495 #define stl_portinit (* ((uart_t *) portp->uartp)->portinit)
496 #define stl_setport (* ((uart_t *) portp->uartp)->setport)
497 #define stl_getsignals (* ((uart_t *) portp->uartp)->getsignals)
498 #define stl_setsignals (* ((uart_t *) portp->uartp)->setsignals)
499 #define stl_enablerxtx (* ((uart_t *) portp->uartp)->enablerxtx)
500 #define stl_startrxtx (* ((uart_t *) portp->uartp)->startrxtx)
501 #define stl_disableintrs (* ((uart_t *) portp->uartp)->disableintrs)
502 #define stl_sendbreak (* ((uart_t *) portp->uartp)->sendbreak)
503 #define stl_flowctrl (* ((uart_t *) portp->uartp)->flowctrl)
504 #define stl_sendflow (* ((uart_t *) portp->uartp)->sendflow)
505 #define stl_flush (* ((uart_t *) portp->uartp)->flush)
506 #define stl_datastate (* ((uart_t *) portp->uartp)->datastate)
508 /*****************************************************************************/
511 * CD1400 UART specific data initialization.
513 static uart_t stl_cd1400uart
= {
517 stl_cd1400getsignals
,
518 stl_cd1400setsignals
,
519 stl_cd1400enablerxtx
,
521 stl_cd1400disableintrs
,
531 * Define the offsets within the register bank of a cd1400 based panel.
532 * These io address offsets are common to the EasyIO board as well.
540 #define EREG_BANKSIZE 8
542 #define CD1400_CLK 25000000
543 #define CD1400_CLK8M 20000000
546 * Define the cd1400 baud rate clocks. These are used when calculating
547 * what clock and divisor to use for the required baud rate. Also
548 * define the maximum baud rate allowed, and the default base baud.
550 static int stl_cd1400clkdivs
[] = {
551 CD1400_CLK0
, CD1400_CLK1
, CD1400_CLK2
, CD1400_CLK3
, CD1400_CLK4
554 /*****************************************************************************/
557 * SC26198 UART specific data initization.
559 static uart_t stl_sc26198uart
= {
560 stl_sc26198panelinit
,
563 stl_sc26198getsignals
,
564 stl_sc26198setsignals
,
565 stl_sc26198enablerxtx
,
566 stl_sc26198startrxtx
,
567 stl_sc26198disableintrs
,
568 stl_sc26198sendbreak
,
572 stl_sc26198datastate
,
577 * Define the offsets within the register bank of a sc26198 based panel.
585 #define XP_BANKSIZE 4
588 * Define the sc26198 baud rate table. Offsets within the table
589 * represent the actual baud rate selector of sc26198 registers.
591 static unsigned int sc26198_baudtable
[] = {
592 50, 75, 150, 200, 300, 450, 600, 900, 1200, 1800, 2400, 3600,
593 4800, 7200, 9600, 14400, 19200, 28800, 38400, 57600, 115200,
594 230400, 460800, 921600
597 #define SC26198_NRBAUDS ARRAY_SIZE(sc26198_baudtable)
599 /*****************************************************************************/
602 * Define the driver info for a user level control device. Used mainly
603 * to get at port stats - only not using the port device itself.
605 static const struct file_operations stl_fsiomem
= {
606 .owner
= THIS_MODULE
,
607 .ioctl
= stl_memioctl
,
610 static struct class *stallion_class
;
612 static void stl_cd_change(struct stlport
*portp
)
614 unsigned int oldsigs
= portp
->sigs
;
615 struct tty_struct
*tty
= tty_port_tty_get(&portp
->port
);
620 portp
->sigs
= stl_getsignals(portp
);
622 if ((portp
->sigs
& TIOCM_CD
) && ((oldsigs
& TIOCM_CD
) == 0))
623 wake_up_interruptible(&portp
->port
.open_wait
);
625 if ((oldsigs
& TIOCM_CD
) && ((portp
->sigs
& TIOCM_CD
) == 0))
626 if (portp
->port
.flags
& ASYNC_CHECK_CD
)
632 * Check for any arguments passed in on the module load command line.
635 /*****************************************************************************/
638 * Parse the supplied argument string, into the board conf struct.
641 static int __init
stl_parsebrd(struct stlconf
*confp
, char **argp
)
646 pr_debug("stl_parsebrd(confp=%p,argp=%p)\n", confp
, argp
);
648 if ((argp
[0] == NULL
) || (*argp
[0] == 0))
651 for (sp
= argp
[0], i
= 0; (*sp
!= 0) && (i
< 25); sp
++, i
++)
654 for (i
= 0; i
< ARRAY_SIZE(stl_brdstr
); i
++)
655 if (strcmp(stl_brdstr
[i
].name
, argp
[0]) == 0)
658 if (i
== ARRAY_SIZE(stl_brdstr
)) {
659 printk("STALLION: unknown board name, %s?\n", argp
[0]);
663 confp
->brdtype
= stl_brdstr
[i
].type
;
666 if ((argp
[i
] != NULL
) && (*argp
[i
] != 0))
667 confp
->ioaddr1
= simple_strtoul(argp
[i
], NULL
, 0);
669 if (confp
->brdtype
== BRD_ECH
) {
670 if ((argp
[i
] != NULL
) && (*argp
[i
] != 0))
671 confp
->ioaddr2
= simple_strtoul(argp
[i
], NULL
, 0);
674 if ((argp
[i
] != NULL
) && (*argp
[i
] != 0))
675 confp
->irq
= simple_strtoul(argp
[i
], NULL
, 0);
679 /*****************************************************************************/
682 * Allocate a new board structure. Fill out the basic info in it.
685 static struct stlbrd
*stl_allocbrd(void)
689 brdp
= kzalloc(sizeof(struct stlbrd
), GFP_KERNEL
);
691 printk("STALLION: failed to allocate memory (size=%Zd)\n",
692 sizeof(struct stlbrd
));
696 brdp
->magic
= STL_BOARDMAGIC
;
700 /*****************************************************************************/
702 static int stl_open(struct tty_struct
*tty
, struct file
*filp
)
704 struct stlport
*portp
;
706 unsigned int minordev
, brdnr
, panelnr
;
709 pr_debug("stl_open(tty=%p,filp=%p): device=%s\n", tty
, filp
, tty
->name
);
711 minordev
= tty
->index
;
712 brdnr
= MINOR2BRD(minordev
);
713 if (brdnr
>= stl_nrbrds
)
715 brdp
= stl_brds
[brdnr
];
718 minordev
= MINOR2PORT(minordev
);
719 for (portnr
= -1, panelnr
= 0; panelnr
< STL_MAXPANELS
; panelnr
++) {
720 if (brdp
->panels
[panelnr
] == NULL
)
722 if (minordev
< brdp
->panels
[panelnr
]->nrports
) {
726 minordev
-= brdp
->panels
[panelnr
]->nrports
;
731 portp
= brdp
->panels
[panelnr
]->ports
[portnr
];
736 * On the first open of the device setup the port hardware, and
737 * initialize the per port data structure.
739 tty_port_tty_set(&portp
->port
, tty
);
740 tty
->driver_data
= portp
;
743 if ((portp
->port
.flags
& ASYNC_INITIALIZED
) == 0) {
744 if (!portp
->tx
.buf
) {
745 portp
->tx
.buf
= kmalloc(STL_TXBUFSIZE
, GFP_KERNEL
);
748 portp
->tx
.head
= portp
->tx
.buf
;
749 portp
->tx
.tail
= portp
->tx
.buf
;
751 stl_setport(portp
, tty
->termios
);
752 portp
->sigs
= stl_getsignals(portp
);
753 stl_setsignals(portp
, 1, 1);
754 stl_enablerxtx(portp
, 1, 1);
755 stl_startrxtx(portp
, 1, 0);
756 clear_bit(TTY_IO_ERROR
, &tty
->flags
);
757 portp
->port
.flags
|= ASYNC_INITIALIZED
;
761 * Check if this port is in the middle of closing. If so then wait
762 * until it is closed then return error status, based on flag settings.
763 * The sleep here does not need interrupt protection since the wakeup
764 * for it is done with the same context.
766 if (portp
->port
.flags
& ASYNC_CLOSING
) {
767 interruptible_sleep_on(&portp
->port
.close_wait
);
768 if (portp
->port
.flags
& ASYNC_HUP_NOTIFY
)
774 * Based on type of open being done check if it can overlap with any
775 * previous opens still in effect. If we are a normal serial device
776 * then also we might have to wait for carrier.
778 if (!(filp
->f_flags
& O_NONBLOCK
))
779 if ((rc
= stl_waitcarrier(tty
, portp
, filp
)) != 0)
782 portp
->port
.flags
|= ASYNC_NORMAL_ACTIVE
;
787 /*****************************************************************************/
790 * Possibly need to wait for carrier (DCD signal) to come high. Say
791 * maybe because if we are clocal then we don't need to wait...
794 static int stl_waitcarrier(struct tty_struct
*tty
, struct stlport
*portp
,
800 pr_debug("stl_waitcarrier(portp=%p,filp=%p)\n", portp
, filp
);
805 spin_lock_irqsave(&stallion_lock
, flags
);
807 if (tty
->termios
->c_cflag
& CLOCAL
)
810 portp
->openwaitcnt
++;
811 if (! tty_hung_up_p(filp
))
815 /* Takes brd_lock internally */
816 stl_setsignals(portp
, 1, 1);
817 if (tty_hung_up_p(filp
) ||
818 ((portp
->port
.flags
& ASYNC_INITIALIZED
) == 0)) {
819 if (portp
->port
.flags
& ASYNC_HUP_NOTIFY
)
825 if (((portp
->port
.flags
& ASYNC_CLOSING
) == 0) &&
826 (doclocal
|| (portp
->sigs
& TIOCM_CD
)))
828 if (signal_pending(current
)) {
833 interruptible_sleep_on(&portp
->port
.open_wait
);
836 if (! tty_hung_up_p(filp
))
838 portp
->openwaitcnt
--;
839 spin_unlock_irqrestore(&stallion_lock
, flags
);
844 /*****************************************************************************/
846 static void stl_flushbuffer(struct tty_struct
*tty
)
848 struct stlport
*portp
;
850 pr_debug("stl_flushbuffer(tty=%p)\n", tty
);
854 portp
= tty
->driver_data
;
862 /*****************************************************************************/
864 static void stl_waituntilsent(struct tty_struct
*tty
, int timeout
)
866 struct stlport
*portp
;
869 pr_debug("stl_waituntilsent(tty=%p,timeout=%d)\n", tty
, timeout
);
873 portp
= tty
->driver_data
;
879 tend
= jiffies
+ timeout
;
882 while (stl_datastate(portp
)) {
883 if (signal_pending(current
))
885 msleep_interruptible(20);
886 if (time_after_eq(jiffies
, tend
))
892 /*****************************************************************************/
894 static void stl_close(struct tty_struct
*tty
, struct file
*filp
)
896 struct stlport
*portp
;
899 pr_debug("stl_close(tty=%p,filp=%p)\n", tty
, filp
);
901 portp
= tty
->driver_data
;
905 spin_lock_irqsave(&stallion_lock
, flags
);
906 if (tty_hung_up_p(filp
)) {
907 spin_unlock_irqrestore(&stallion_lock
, flags
);
910 if ((tty
->count
== 1) && (portp
->port
.count
!= 1))
911 portp
->port
.count
= 1;
912 if (portp
->port
.count
-- > 1) {
913 spin_unlock_irqrestore(&stallion_lock
, flags
);
917 portp
->port
.count
= 0;
918 portp
->port
.flags
|= ASYNC_CLOSING
;
921 * May want to wait for any data to drain before closing. The BUSY
922 * flag keeps track of whether we are still sending or not - it is
923 * very accurate for the cd1400, not quite so for the sc26198.
924 * (The sc26198 has no "end-of-data" interrupt only empty FIFO)
928 spin_unlock_irqrestore(&stallion_lock
, flags
);
930 if (portp
->closing_wait
!= ASYNC_CLOSING_WAIT_NONE
)
931 tty_wait_until_sent(tty
, portp
->closing_wait
);
932 stl_waituntilsent(tty
, (HZ
/ 2));
935 spin_lock_irqsave(&stallion_lock
, flags
);
936 portp
->port
.flags
&= ~ASYNC_INITIALIZED
;
937 spin_unlock_irqrestore(&stallion_lock
, flags
);
939 stl_disableintrs(portp
);
940 if (tty
->termios
->c_cflag
& HUPCL
)
941 stl_setsignals(portp
, 0, 0);
942 stl_enablerxtx(portp
, 0, 0);
943 stl_flushbuffer(tty
);
945 if (portp
->tx
.buf
!= NULL
) {
946 kfree(portp
->tx
.buf
);
947 portp
->tx
.buf
= NULL
;
948 portp
->tx
.head
= NULL
;
949 portp
->tx
.tail
= NULL
;
951 set_bit(TTY_IO_ERROR
, &tty
->flags
);
952 tty_ldisc_flush(tty
);
955 tty_port_tty_set(&portp
->port
, NULL
);
957 if (portp
->openwaitcnt
) {
958 if (portp
->close_delay
)
959 msleep_interruptible(jiffies_to_msecs(portp
->close_delay
));
960 wake_up_interruptible(&portp
->port
.open_wait
);
963 portp
->port
.flags
&= ~(ASYNC_NORMAL_ACTIVE
|ASYNC_CLOSING
);
964 wake_up_interruptible(&portp
->port
.close_wait
);
967 /*****************************************************************************/
970 * Write routine. Take data and stuff it in to the TX ring queue.
971 * If transmit interrupts are not running then start them.
974 static int stl_write(struct tty_struct
*tty
, const unsigned char *buf
, int count
)
976 struct stlport
*portp
;
977 unsigned int len
, stlen
;
978 unsigned char *chbuf
;
981 pr_debug("stl_write(tty=%p,buf=%p,count=%d)\n", tty
, buf
, count
);
983 portp
= tty
->driver_data
;
986 if (portp
->tx
.buf
== NULL
)
990 * If copying direct from user space we must cater for page faults,
991 * causing us to "sleep" here for a while. To handle this copy in all
992 * the data we need now, into a local buffer. Then when we got it all
993 * copy it into the TX buffer.
995 chbuf
= (unsigned char *) buf
;
997 head
= portp
->tx
.head
;
998 tail
= portp
->tx
.tail
;
1000 len
= STL_TXBUFSIZE
- (head
- tail
) - 1;
1001 stlen
= STL_TXBUFSIZE
- (head
- portp
->tx
.buf
);
1003 len
= tail
- head
- 1;
1007 len
= min(len
, (unsigned int)count
);
1010 stlen
= min(len
, stlen
);
1011 memcpy(head
, chbuf
, stlen
);
1016 if (head
>= (portp
->tx
.buf
+ STL_TXBUFSIZE
)) {
1017 head
= portp
->tx
.buf
;
1018 stlen
= tail
- head
;
1021 portp
->tx
.head
= head
;
1023 clear_bit(ASYI_TXLOW
, &portp
->istate
);
1024 stl_startrxtx(portp
, -1, 1);
1029 /*****************************************************************************/
1031 static int stl_putchar(struct tty_struct
*tty
, unsigned char ch
)
1033 struct stlport
*portp
;
1037 pr_debug("stl_putchar(tty=%p,ch=%x)\n", tty
, ch
);
1041 portp
= tty
->driver_data
;
1044 if (portp
->tx
.buf
== NULL
)
1047 head
= portp
->tx
.head
;
1048 tail
= portp
->tx
.tail
;
1050 len
= (head
>= tail
) ? (STL_TXBUFSIZE
- (head
- tail
)) : (tail
- head
);
1055 if (head
>= (portp
->tx
.buf
+ STL_TXBUFSIZE
))
1056 head
= portp
->tx
.buf
;
1058 portp
->tx
.head
= head
;
1062 /*****************************************************************************/
1065 * If there are any characters in the buffer then make sure that TX
1066 * interrupts are on and get'em out. Normally used after the putchar
1067 * routine has been called.
1070 static void stl_flushchars(struct tty_struct
*tty
)
1072 struct stlport
*portp
;
1074 pr_debug("stl_flushchars(tty=%p)\n", tty
);
1078 portp
= tty
->driver_data
;
1081 if (portp
->tx
.buf
== NULL
)
1084 stl_startrxtx(portp
, -1, 1);
1087 /*****************************************************************************/
1089 static int stl_writeroom(struct tty_struct
*tty
)
1091 struct stlport
*portp
;
1094 pr_debug("stl_writeroom(tty=%p)\n", tty
);
1098 portp
= tty
->driver_data
;
1101 if (portp
->tx
.buf
== NULL
)
1104 head
= portp
->tx
.head
;
1105 tail
= portp
->tx
.tail
;
1106 return (head
>= tail
) ? (STL_TXBUFSIZE
- (head
- tail
) - 1) : (tail
- head
- 1);
1109 /*****************************************************************************/
1112 * Return number of chars in the TX buffer. Normally we would just
1113 * calculate the number of chars in the buffer and return that, but if
1114 * the buffer is empty and TX interrupts are still on then we return
1115 * that the buffer still has 1 char in it. This way whoever called us
1116 * will not think that ALL chars have drained - since the UART still
1117 * must have some chars in it (we are busy after all).
1120 static int stl_charsinbuffer(struct tty_struct
*tty
)
1122 struct stlport
*portp
;
1126 pr_debug("stl_charsinbuffer(tty=%p)\n", tty
);
1130 portp
= tty
->driver_data
;
1133 if (portp
->tx
.buf
== NULL
)
1136 head
= portp
->tx
.head
;
1137 tail
= portp
->tx
.tail
;
1138 size
= (head
>= tail
) ? (head
- tail
) : (STL_TXBUFSIZE
- (tail
- head
));
1139 if ((size
== 0) && test_bit(ASYI_TXBUSY
, &portp
->istate
))
1144 /*****************************************************************************/
1147 * Generate the serial struct info.
1150 static int stl_getserial(struct stlport
*portp
, struct serial_struct __user
*sp
)
1152 struct serial_struct sio
;
1153 struct stlbrd
*brdp
;
1155 pr_debug("stl_getserial(portp=%p,sp=%p)\n", portp
, sp
);
1157 memset(&sio
, 0, sizeof(struct serial_struct
));
1158 sio
.line
= portp
->portnr
;
1159 sio
.port
= portp
->ioaddr
;
1160 sio
.flags
= portp
->port
.flags
;
1161 sio
.baud_base
= portp
->baud_base
;
1162 sio
.close_delay
= portp
->close_delay
;
1163 sio
.closing_wait
= portp
->closing_wait
;
1164 sio
.custom_divisor
= portp
->custom_divisor
;
1166 if (portp
->uartp
== &stl_cd1400uart
) {
1167 sio
.type
= PORT_CIRRUS
;
1168 sio
.xmit_fifo_size
= CD1400_TXFIFOSIZE
;
1170 sio
.type
= PORT_UNKNOWN
;
1171 sio
.xmit_fifo_size
= SC26198_TXFIFOSIZE
;
1174 brdp
= stl_brds
[portp
->brdnr
];
1176 sio
.irq
= brdp
->irq
;
1178 return copy_to_user(sp
, &sio
, sizeof(struct serial_struct
)) ? -EFAULT
: 0;
1181 /*****************************************************************************/
1184 * Set port according to the serial struct info.
1185 * At this point we do not do any auto-configure stuff, so we will
1186 * just quietly ignore any requests to change irq, etc.
1189 static int stl_setserial(struct tty_struct
*tty
, struct serial_struct __user
*sp
)
1191 struct stlport
* portp
= tty
->driver_data
;
1192 struct serial_struct sio
;
1194 pr_debug("stl_setserial(portp=%p,sp=%p)\n", portp
, sp
);
1196 if (copy_from_user(&sio
, sp
, sizeof(struct serial_struct
)))
1198 if (!capable(CAP_SYS_ADMIN
)) {
1199 if ((sio
.baud_base
!= portp
->baud_base
) ||
1200 (sio
.close_delay
!= portp
->close_delay
) ||
1201 ((sio
.flags
& ~ASYNC_USR_MASK
) !=
1202 (portp
->port
.flags
& ~ASYNC_USR_MASK
)))
1206 portp
->port
.flags
= (portp
->port
.flags
& ~ASYNC_USR_MASK
) |
1207 (sio
.flags
& ASYNC_USR_MASK
);
1208 portp
->baud_base
= sio
.baud_base
;
1209 portp
->close_delay
= sio
.close_delay
;
1210 portp
->closing_wait
= sio
.closing_wait
;
1211 portp
->custom_divisor
= sio
.custom_divisor
;
1212 stl_setport(portp
, tty
->termios
);
1216 /*****************************************************************************/
1218 static int stl_tiocmget(struct tty_struct
*tty
, struct file
*file
)
1220 struct stlport
*portp
;
1224 portp
= tty
->driver_data
;
1227 if (tty
->flags
& (1 << TTY_IO_ERROR
))
1230 return stl_getsignals(portp
);
1233 static int stl_tiocmset(struct tty_struct
*tty
, struct file
*file
,
1234 unsigned int set
, unsigned int clear
)
1236 struct stlport
*portp
;
1237 int rts
= -1, dtr
= -1;
1241 portp
= tty
->driver_data
;
1244 if (tty
->flags
& (1 << TTY_IO_ERROR
))
1247 if (set
& TIOCM_RTS
)
1249 if (set
& TIOCM_DTR
)
1251 if (clear
& TIOCM_RTS
)
1253 if (clear
& TIOCM_DTR
)
1256 stl_setsignals(portp
, dtr
, rts
);
1260 static int stl_ioctl(struct tty_struct
*tty
, struct file
*file
, unsigned int cmd
, unsigned long arg
)
1262 struct stlport
*portp
;
1264 void __user
*argp
= (void __user
*)arg
;
1266 pr_debug("stl_ioctl(tty=%p,file=%p,cmd=%x,arg=%lx)\n", tty
, file
, cmd
,
1271 portp
= tty
->driver_data
;
1275 if ((cmd
!= TIOCGSERIAL
) && (cmd
!= TIOCSSERIAL
) &&
1276 (cmd
!= COM_GETPORTSTATS
) && (cmd
!= COM_CLRPORTSTATS
))
1277 if (tty
->flags
& (1 << TTY_IO_ERROR
))
1286 rc
= stl_getserial(portp
, argp
);
1289 rc
= stl_setserial(tty
, argp
);
1291 case COM_GETPORTSTATS
:
1292 rc
= stl_getportstats(tty
, portp
, argp
);
1294 case COM_CLRPORTSTATS
:
1295 rc
= stl_clrportstats(portp
, argp
);
1301 case TIOCSERGSTRUCT
:
1302 case TIOCSERGETMULTI
:
1303 case TIOCSERSETMULTI
:
1312 /*****************************************************************************/
1315 * Start the transmitter again. Just turn TX interrupts back on.
1318 static void stl_start(struct tty_struct
*tty
)
1320 struct stlport
*portp
;
1322 pr_debug("stl_start(tty=%p)\n", tty
);
1326 portp
= tty
->driver_data
;
1329 stl_startrxtx(portp
, -1, 1);
1332 /*****************************************************************************/
1334 static void stl_settermios(struct tty_struct
*tty
, struct ktermios
*old
)
1336 struct stlport
*portp
;
1337 struct ktermios
*tiosp
;
1339 pr_debug("stl_settermios(tty=%p,old=%p)\n", tty
, old
);
1343 portp
= tty
->driver_data
;
1347 tiosp
= tty
->termios
;
1348 if ((tiosp
->c_cflag
== old
->c_cflag
) &&
1349 (tiosp
->c_iflag
== old
->c_iflag
))
1352 stl_setport(portp
, tiosp
);
1353 stl_setsignals(portp
, ((tiosp
->c_cflag
& (CBAUD
& ~CBAUDEX
)) ? 1 : 0),
1355 if ((old
->c_cflag
& CRTSCTS
) && ((tiosp
->c_cflag
& CRTSCTS
) == 0)) {
1356 tty
->hw_stopped
= 0;
1359 if (((old
->c_cflag
& CLOCAL
) == 0) && (tiosp
->c_cflag
& CLOCAL
))
1360 wake_up_interruptible(&portp
->port
.open_wait
);
1363 /*****************************************************************************/
1366 * Attempt to flow control who ever is sending us data. Based on termios
1367 * settings use software or/and hardware flow control.
1370 static void stl_throttle(struct tty_struct
*tty
)
1372 struct stlport
*portp
;
1374 pr_debug("stl_throttle(tty=%p)\n", tty
);
1378 portp
= tty
->driver_data
;
1381 stl_flowctrl(portp
, 0);
1384 /*****************************************************************************/
1387 * Unflow control the device sending us data...
1390 static void stl_unthrottle(struct tty_struct
*tty
)
1392 struct stlport
*portp
;
1394 pr_debug("stl_unthrottle(tty=%p)\n", tty
);
1398 portp
= tty
->driver_data
;
1401 stl_flowctrl(portp
, 1);
1404 /*****************************************************************************/
1407 * Stop the transmitter. Basically to do this we will just turn TX
1411 static void stl_stop(struct tty_struct
*tty
)
1413 struct stlport
*portp
;
1415 pr_debug("stl_stop(tty=%p)\n", tty
);
1419 portp
= tty
->driver_data
;
1422 stl_startrxtx(portp
, -1, 0);
1425 /*****************************************************************************/
1428 * Hangup this port. This is pretty much like closing the port, only
1429 * a little more brutal. No waiting for data to drain. Shutdown the
1430 * port and maybe drop signals.
1433 static void stl_hangup(struct tty_struct
*tty
)
1435 struct stlport
*portp
;
1437 pr_debug("stl_hangup(tty=%p)\n", tty
);
1441 portp
= tty
->driver_data
;
1445 portp
->port
.flags
&= ~ASYNC_INITIALIZED
;
1446 stl_disableintrs(portp
);
1447 if (tty
->termios
->c_cflag
& HUPCL
)
1448 stl_setsignals(portp
, 0, 0);
1449 stl_enablerxtx(portp
, 0, 0);
1450 stl_flushbuffer(tty
);
1452 set_bit(TTY_IO_ERROR
, &tty
->flags
);
1453 if (portp
->tx
.buf
!= NULL
) {
1454 kfree(portp
->tx
.buf
);
1455 portp
->tx
.buf
= NULL
;
1456 portp
->tx
.head
= NULL
;
1457 portp
->tx
.tail
= NULL
;
1459 tty_port_tty_set(&portp
->port
, NULL
);
1460 portp
->port
.flags
&= ~ASYNC_NORMAL_ACTIVE
;
1461 portp
->port
.count
= 0;
1462 wake_up_interruptible(&portp
->port
.open_wait
);
1465 /*****************************************************************************/
1467 static int stl_breakctl(struct tty_struct
*tty
, int state
)
1469 struct stlport
*portp
;
1471 pr_debug("stl_breakctl(tty=%p,state=%d)\n", tty
, state
);
1475 portp
= tty
->driver_data
;
1479 stl_sendbreak(portp
, ((state
== -1) ? 1 : 2));
1483 /*****************************************************************************/
1485 static void stl_sendxchar(struct tty_struct
*tty
, char ch
)
1487 struct stlport
*portp
;
1489 pr_debug("stl_sendxchar(tty=%p,ch=%x)\n", tty
, ch
);
1493 portp
= tty
->driver_data
;
1497 if (ch
== STOP_CHAR(tty
))
1498 stl_sendflow(portp
, 0);
1499 else if (ch
== START_CHAR(tty
))
1500 stl_sendflow(portp
, 1);
1502 stl_putchar(tty
, ch
);
1505 /*****************************************************************************/
1510 * Format info for a specified port. The line is deliberately limited
1511 * to 80 characters. (If it is too long it will be truncated, if too
1512 * short then padded with spaces).
1515 static int stl_portinfo(struct stlport
*portp
, int portnr
, char *pos
)
1521 sp
+= sprintf(sp
, "%d: uart:%s tx:%d rx:%d",
1522 portnr
, (portp
->hwid
== 1) ? "SC26198" : "CD1400",
1523 (int) portp
->stats
.txtotal
, (int) portp
->stats
.rxtotal
);
1525 if (portp
->stats
.rxframing
)
1526 sp
+= sprintf(sp
, " fe:%d", (int) portp
->stats
.rxframing
);
1527 if (portp
->stats
.rxparity
)
1528 sp
+= sprintf(sp
, " pe:%d", (int) portp
->stats
.rxparity
);
1529 if (portp
->stats
.rxbreaks
)
1530 sp
+= sprintf(sp
, " brk:%d", (int) portp
->stats
.rxbreaks
);
1531 if (portp
->stats
.rxoverrun
)
1532 sp
+= sprintf(sp
, " oe:%d", (int) portp
->stats
.rxoverrun
);
1534 sigs
= stl_getsignals(portp
);
1535 cnt
= sprintf(sp
, "%s%s%s%s%s ",
1536 (sigs
& TIOCM_RTS
) ? "|RTS" : "",
1537 (sigs
& TIOCM_CTS
) ? "|CTS" : "",
1538 (sigs
& TIOCM_DTR
) ? "|DTR" : "",
1539 (sigs
& TIOCM_CD
) ? "|DCD" : "",
1540 (sigs
& TIOCM_DSR
) ? "|DSR" : "");
1544 for (cnt
= sp
- pos
; cnt
< (MAXLINE
- 1); cnt
++)
1547 pos
[(MAXLINE
- 2)] = '+';
1548 pos
[(MAXLINE
- 1)] = '\n';
1553 /*****************************************************************************/
1556 * Port info, read from the /proc file system.
1559 static int stl_readproc(char *page
, char **start
, off_t off
, int count
, int *eof
, void *data
)
1561 struct stlbrd
*brdp
;
1562 struct stlpanel
*panelp
;
1563 struct stlport
*portp
;
1564 unsigned int brdnr
, panelnr
, portnr
;
1565 int totalport
, curoff
, maxoff
;
1568 pr_debug("stl_readproc(page=%p,start=%p,off=%lx,count=%d,eof=%p,"
1569 "data=%p\n", page
, start
, off
, count
, eof
, data
);
1576 pos
+= sprintf(pos
, "%s: version %s", stl_drvtitle
,
1578 while (pos
< (page
+ MAXLINE
- 1))
1585 * We scan through for each board, panel and port. The offset is
1586 * calculated on the fly, and irrelevant ports are skipped.
1588 for (brdnr
= 0; brdnr
< stl_nrbrds
; brdnr
++) {
1589 brdp
= stl_brds
[brdnr
];
1592 if (brdp
->state
== 0)
1595 maxoff
= curoff
+ (brdp
->nrports
* MAXLINE
);
1596 if (off
>= maxoff
) {
1601 totalport
= brdnr
* STL_MAXPORTS
;
1602 for (panelnr
= 0; panelnr
< brdp
->nrpanels
; panelnr
++) {
1603 panelp
= brdp
->panels
[panelnr
];
1607 maxoff
= curoff
+ (panelp
->nrports
* MAXLINE
);
1608 if (off
>= maxoff
) {
1610 totalport
+= panelp
->nrports
;
1614 for (portnr
= 0; portnr
< panelp
->nrports
; portnr
++,
1616 portp
= panelp
->ports
[portnr
];
1619 if (off
>= (curoff
+= MAXLINE
))
1621 if ((pos
- page
+ MAXLINE
) > count
)
1623 pos
+= stl_portinfo(portp
, totalport
, pos
);
1635 /*****************************************************************************/
1638 * All board interrupts are vectored through here first. This code then
1639 * calls off to the approrpriate board interrupt handlers.
1642 static irqreturn_t
stl_intr(int irq
, void *dev_id
)
1644 struct stlbrd
*brdp
= dev_id
;
1646 pr_debug("stl_intr(brdp=%p,irq=%d)\n", brdp
, brdp
->irq
);
1648 return IRQ_RETVAL((* brdp
->isr
)(brdp
));
1651 /*****************************************************************************/
1654 * Interrupt service routine for EasyIO board types.
1657 static int stl_eiointr(struct stlbrd
*brdp
)
1659 struct stlpanel
*panelp
;
1660 unsigned int iobase
;
1663 spin_lock(&brd_lock
);
1664 panelp
= brdp
->panels
[0];
1665 iobase
= panelp
->iobase
;
1666 while (inb(brdp
->iostatus
) & EIO_INTRPEND
) {
1668 (* panelp
->isr
)(panelp
, iobase
);
1670 spin_unlock(&brd_lock
);
1674 /*****************************************************************************/
1677 * Interrupt service routine for ECH-AT board types.
1680 static int stl_echatintr(struct stlbrd
*brdp
)
1682 struct stlpanel
*panelp
;
1683 unsigned int ioaddr
, bnknr
;
1686 outb((brdp
->ioctrlval
| ECH_BRDENABLE
), brdp
->ioctrl
);
1688 while (inb(brdp
->iostatus
) & ECH_INTRPEND
) {
1690 for (bnknr
= 0; bnknr
< brdp
->nrbnks
; bnknr
++) {
1691 ioaddr
= brdp
->bnkstataddr
[bnknr
];
1692 if (inb(ioaddr
) & ECH_PNLINTRPEND
) {
1693 panelp
= brdp
->bnk2panel
[bnknr
];
1694 (* panelp
->isr
)(panelp
, (ioaddr
& 0xfffc));
1699 outb((brdp
->ioctrlval
| ECH_BRDDISABLE
), brdp
->ioctrl
);
1704 /*****************************************************************************/
1707 * Interrupt service routine for ECH-MCA board types.
1710 static int stl_echmcaintr(struct stlbrd
*brdp
)
1712 struct stlpanel
*panelp
;
1713 unsigned int ioaddr
, bnknr
;
1716 while (inb(brdp
->iostatus
) & ECH_INTRPEND
) {
1718 for (bnknr
= 0; bnknr
< brdp
->nrbnks
; bnknr
++) {
1719 ioaddr
= brdp
->bnkstataddr
[bnknr
];
1720 if (inb(ioaddr
) & ECH_PNLINTRPEND
) {
1721 panelp
= brdp
->bnk2panel
[bnknr
];
1722 (* panelp
->isr
)(panelp
, (ioaddr
& 0xfffc));
1729 /*****************************************************************************/
1732 * Interrupt service routine for ECH-PCI board types.
1735 static int stl_echpciintr(struct stlbrd
*brdp
)
1737 struct stlpanel
*panelp
;
1738 unsigned int ioaddr
, bnknr
, recheck
;
1743 for (bnknr
= 0; bnknr
< brdp
->nrbnks
; bnknr
++) {
1744 outb(brdp
->bnkpageaddr
[bnknr
], brdp
->ioctrl
);
1745 ioaddr
= brdp
->bnkstataddr
[bnknr
];
1746 if (inb(ioaddr
) & ECH_PNLINTRPEND
) {
1747 panelp
= brdp
->bnk2panel
[bnknr
];
1748 (* panelp
->isr
)(panelp
, (ioaddr
& 0xfffc));
1759 /*****************************************************************************/
1762 * Interrupt service routine for ECH-8/64-PCI board types.
1765 static int stl_echpci64intr(struct stlbrd
*brdp
)
1767 struct stlpanel
*panelp
;
1768 unsigned int ioaddr
, bnknr
;
1771 while (inb(brdp
->ioctrl
) & 0x1) {
1773 for (bnknr
= 0; bnknr
< brdp
->nrbnks
; bnknr
++) {
1774 ioaddr
= brdp
->bnkstataddr
[bnknr
];
1775 if (inb(ioaddr
) & ECH_PNLINTRPEND
) {
1776 panelp
= brdp
->bnk2panel
[bnknr
];
1777 (* panelp
->isr
)(panelp
, (ioaddr
& 0xfffc));
1785 /*****************************************************************************/
1788 * Initialize all the ports on a panel.
1791 static int __devinit
stl_initports(struct stlbrd
*brdp
, struct stlpanel
*panelp
)
1793 struct stlport
*portp
;
1797 pr_debug("stl_initports(brdp=%p,panelp=%p)\n", brdp
, panelp
);
1799 chipmask
= stl_panelinit(brdp
, panelp
);
1802 * All UART's are initialized (if found!). Now go through and setup
1803 * each ports data structures.
1805 for (i
= 0; i
< panelp
->nrports
; i
++) {
1806 portp
= kzalloc(sizeof(struct stlport
), GFP_KERNEL
);
1808 printk("STALLION: failed to allocate memory "
1809 "(size=%Zd)\n", sizeof(struct stlport
));
1812 tty_port_init(&portp
->port
);
1813 portp
->magic
= STL_PORTMAGIC
;
1815 portp
->brdnr
= panelp
->brdnr
;
1816 portp
->panelnr
= panelp
->panelnr
;
1817 portp
->uartp
= panelp
->uartp
;
1818 portp
->clk
= brdp
->clk
;
1819 portp
->baud_base
= STL_BAUDBASE
;
1820 portp
->close_delay
= STL_CLOSEDELAY
;
1821 portp
->closing_wait
= 30 * HZ
;
1822 init_waitqueue_head(&portp
->port
.open_wait
);
1823 init_waitqueue_head(&portp
->port
.close_wait
);
1824 portp
->stats
.brd
= portp
->brdnr
;
1825 portp
->stats
.panel
= portp
->panelnr
;
1826 portp
->stats
.port
= portp
->portnr
;
1827 panelp
->ports
[i
] = portp
;
1828 stl_portinit(brdp
, panelp
, portp
);
1834 static void stl_cleanup_panels(struct stlbrd
*brdp
)
1836 struct stlpanel
*panelp
;
1837 struct stlport
*portp
;
1839 struct tty_struct
*tty
;
1841 for (j
= 0; j
< STL_MAXPANELS
; j
++) {
1842 panelp
= brdp
->panels
[j
];
1845 for (k
= 0; k
< STL_PORTSPERPANEL
; k
++) {
1846 portp
= panelp
->ports
[k
];
1849 tty
= tty_port_tty_get(&portp
->port
);
1854 kfree(portp
->tx
.buf
);
1861 /*****************************************************************************/
1864 * Try to find and initialize an EasyIO board.
1867 static int __devinit
stl_initeio(struct stlbrd
*brdp
)
1869 struct stlpanel
*panelp
;
1870 unsigned int status
;
1874 pr_debug("stl_initeio(brdp=%p)\n", brdp
);
1876 brdp
->ioctrl
= brdp
->ioaddr1
+ 1;
1877 brdp
->iostatus
= brdp
->ioaddr1
+ 2;
1879 status
= inb(brdp
->iostatus
);
1880 if ((status
& EIO_IDBITMASK
) == EIO_MK3
)
1884 * Handle board specific stuff now. The real difference is PCI
1887 if (brdp
->brdtype
== BRD_EASYIOPCI
) {
1888 brdp
->iosize1
= 0x80;
1889 brdp
->iosize2
= 0x80;
1890 name
= "serial(EIO-PCI)";
1891 outb(0x41, (brdp
->ioaddr2
+ 0x4c));
1894 name
= "serial(EIO)";
1895 if ((brdp
->irq
< 0) || (brdp
->irq
> 15) ||
1896 (stl_vecmap
[brdp
->irq
] == (unsigned char) 0xff)) {
1897 printk("STALLION: invalid irq=%d for brd=%d\n",
1898 brdp
->irq
, brdp
->brdnr
);
1902 outb((stl_vecmap
[brdp
->irq
] | EIO_0WS
|
1903 ((brdp
->irqtype
) ? EIO_INTLEVEL
: EIO_INTEDGE
)),
1908 if (!request_region(brdp
->ioaddr1
, brdp
->iosize1
, name
)) {
1909 printk(KERN_WARNING
"STALLION: Warning, board %d I/O address "
1910 "%x conflicts with another device\n", brdp
->brdnr
,
1915 if (brdp
->iosize2
> 0)
1916 if (!request_region(brdp
->ioaddr2
, brdp
->iosize2
, name
)) {
1917 printk(KERN_WARNING
"STALLION: Warning, board %d I/O "
1918 "address %x conflicts with another device\n",
1919 brdp
->brdnr
, brdp
->ioaddr2
);
1920 printk(KERN_WARNING
"STALLION: Warning, also "
1921 "releasing board %d I/O address %x \n",
1922 brdp
->brdnr
, brdp
->ioaddr1
);
1927 * Everything looks OK, so let's go ahead and probe for the hardware.
1929 brdp
->clk
= CD1400_CLK
;
1930 brdp
->isr
= stl_eiointr
;
1933 switch (status
& EIO_IDBITMASK
) {
1935 brdp
->clk
= CD1400_CLK8M
;
1945 switch (status
& EIO_BRDMASK
) {
1964 * We have verified that the board is actually present, so now we
1965 * can complete the setup.
1968 panelp
= kzalloc(sizeof(struct stlpanel
), GFP_KERNEL
);
1970 printk(KERN_WARNING
"STALLION: failed to allocate memory "
1971 "(size=%Zd)\n", sizeof(struct stlpanel
));
1976 panelp
->magic
= STL_PANELMAGIC
;
1977 panelp
->brdnr
= brdp
->brdnr
;
1978 panelp
->panelnr
= 0;
1979 panelp
->nrports
= brdp
->nrports
;
1980 panelp
->iobase
= brdp
->ioaddr1
;
1981 panelp
->hwid
= status
;
1982 if ((status
& EIO_IDBITMASK
) == EIO_MK3
) {
1983 panelp
->uartp
= &stl_sc26198uart
;
1984 panelp
->isr
= stl_sc26198intr
;
1986 panelp
->uartp
= &stl_cd1400uart
;
1987 panelp
->isr
= stl_cd1400eiointr
;
1990 brdp
->panels
[0] = panelp
;
1992 brdp
->state
|= BRD_FOUND
;
1993 brdp
->hwid
= status
;
1994 if (request_irq(brdp
->irq
, stl_intr
, IRQF_SHARED
, name
, brdp
) != 0) {
1995 printk("STALLION: failed to register interrupt "
1996 "routine for %s irq=%d\n", name
, brdp
->irq
);
2003 stl_cleanup_panels(brdp
);
2005 if (brdp
->iosize2
> 0)
2006 release_region(brdp
->ioaddr2
, brdp
->iosize2
);
2008 release_region(brdp
->ioaddr1
, brdp
->iosize1
);
2013 /*****************************************************************************/
2016 * Try to find an ECH board and initialize it. This code is capable of
2017 * dealing with all types of ECH board.
2020 static int __devinit
stl_initech(struct stlbrd
*brdp
)
2022 struct stlpanel
*panelp
;
2023 unsigned int status
, nxtid
, ioaddr
, conflict
, panelnr
, banknr
, i
;
2027 pr_debug("stl_initech(brdp=%p)\n", brdp
);
2033 * Set up the initial board register contents for boards. This varies a
2034 * bit between the different board types. So we need to handle each
2035 * separately. Also do a check that the supplied IRQ is good.
2037 switch (brdp
->brdtype
) {
2040 brdp
->isr
= stl_echatintr
;
2041 brdp
->ioctrl
= brdp
->ioaddr1
+ 1;
2042 brdp
->iostatus
= brdp
->ioaddr1
+ 1;
2043 status
= inb(brdp
->iostatus
);
2044 if ((status
& ECH_IDBITMASK
) != ECH_ID
) {
2048 if ((brdp
->irq
< 0) || (brdp
->irq
> 15) ||
2049 (stl_vecmap
[brdp
->irq
] == (unsigned char) 0xff)) {
2050 printk("STALLION: invalid irq=%d for brd=%d\n",
2051 brdp
->irq
, brdp
->brdnr
);
2055 status
= ((brdp
->ioaddr2
& ECH_ADDR2MASK
) >> 1);
2056 status
|= (stl_vecmap
[brdp
->irq
] << 1);
2057 outb((status
| ECH_BRDRESET
), brdp
->ioaddr1
);
2058 brdp
->ioctrlval
= ECH_INTENABLE
|
2059 ((brdp
->irqtype
) ? ECH_INTLEVEL
: ECH_INTEDGE
);
2060 for (i
= 0; i
< 10; i
++)
2061 outb((brdp
->ioctrlval
| ECH_BRDENABLE
), brdp
->ioctrl
);
2064 name
= "serial(EC8/32)";
2065 outb(status
, brdp
->ioaddr1
);
2069 brdp
->isr
= stl_echmcaintr
;
2070 brdp
->ioctrl
= brdp
->ioaddr1
+ 0x20;
2071 brdp
->iostatus
= brdp
->ioctrl
;
2072 status
= inb(brdp
->iostatus
);
2073 if ((status
& ECH_IDBITMASK
) != ECH_ID
) {
2077 if ((brdp
->irq
< 0) || (brdp
->irq
> 15) ||
2078 (stl_vecmap
[brdp
->irq
] == (unsigned char) 0xff)) {
2079 printk("STALLION: invalid irq=%d for brd=%d\n",
2080 brdp
->irq
, brdp
->brdnr
);
2084 outb(ECHMC_BRDRESET
, brdp
->ioctrl
);
2085 outb(ECHMC_INTENABLE
, brdp
->ioctrl
);
2087 name
= "serial(EC8/32-MC)";
2091 brdp
->isr
= stl_echpciintr
;
2092 brdp
->ioctrl
= brdp
->ioaddr1
+ 2;
2095 name
= "serial(EC8/32-PCI)";
2099 brdp
->isr
= stl_echpci64intr
;
2100 brdp
->ioctrl
= brdp
->ioaddr2
+ 0x40;
2101 outb(0x43, (brdp
->ioaddr1
+ 0x4c));
2102 brdp
->iosize1
= 0x80;
2103 brdp
->iosize2
= 0x80;
2104 name
= "serial(EC8/64-PCI)";
2108 printk("STALLION: unknown board type=%d\n", brdp
->brdtype
);
2114 * Check boards for possible IO address conflicts and return fail status
2115 * if an IO conflict found.
2118 if (!request_region(brdp
->ioaddr1
, brdp
->iosize1
, name
)) {
2119 printk(KERN_WARNING
"STALLION: Warning, board %d I/O address "
2120 "%x conflicts with another device\n", brdp
->brdnr
,
2125 if (brdp
->iosize2
> 0)
2126 if (!request_region(brdp
->ioaddr2
, brdp
->iosize2
, name
)) {
2127 printk(KERN_WARNING
"STALLION: Warning, board %d I/O "
2128 "address %x conflicts with another device\n",
2129 brdp
->brdnr
, brdp
->ioaddr2
);
2130 printk(KERN_WARNING
"STALLION: Warning, also "
2131 "releasing board %d I/O address %x \n",
2132 brdp
->brdnr
, brdp
->ioaddr1
);
2137 * Scan through the secondary io address space looking for panels.
2138 * As we find'em allocate and initialize panel structures for each.
2140 brdp
->clk
= CD1400_CLK
;
2141 brdp
->hwid
= status
;
2143 ioaddr
= brdp
->ioaddr2
;
2148 for (i
= 0; i
< STL_MAXPANELS
; i
++) {
2149 if (brdp
->brdtype
== BRD_ECHPCI
) {
2150 outb(nxtid
, brdp
->ioctrl
);
2151 ioaddr
= brdp
->ioaddr2
;
2153 status
= inb(ioaddr
+ ECH_PNLSTATUS
);
2154 if ((status
& ECH_PNLIDMASK
) != nxtid
)
2156 panelp
= kzalloc(sizeof(struct stlpanel
), GFP_KERNEL
);
2158 printk("STALLION: failed to allocate memory "
2159 "(size=%Zd)\n", sizeof(struct stlpanel
));
2163 panelp
->magic
= STL_PANELMAGIC
;
2164 panelp
->brdnr
= brdp
->brdnr
;
2165 panelp
->panelnr
= panelnr
;
2166 panelp
->iobase
= ioaddr
;
2167 panelp
->pagenr
= nxtid
;
2168 panelp
->hwid
= status
;
2169 brdp
->bnk2panel
[banknr
] = panelp
;
2170 brdp
->bnkpageaddr
[banknr
] = nxtid
;
2171 brdp
->bnkstataddr
[banknr
++] = ioaddr
+ ECH_PNLSTATUS
;
2173 if (status
& ECH_PNLXPID
) {
2174 panelp
->uartp
= &stl_sc26198uart
;
2175 panelp
->isr
= stl_sc26198intr
;
2176 if (status
& ECH_PNL16PORT
) {
2177 panelp
->nrports
= 16;
2178 brdp
->bnk2panel
[banknr
] = panelp
;
2179 brdp
->bnkpageaddr
[banknr
] = nxtid
;
2180 brdp
->bnkstataddr
[banknr
++] = ioaddr
+ 4 +
2183 panelp
->nrports
= 8;
2185 panelp
->uartp
= &stl_cd1400uart
;
2186 panelp
->isr
= stl_cd1400echintr
;
2187 if (status
& ECH_PNL16PORT
) {
2188 panelp
->nrports
= 16;
2189 panelp
->ackmask
= 0x80;
2190 if (brdp
->brdtype
!= BRD_ECHPCI
)
2191 ioaddr
+= EREG_BANKSIZE
;
2192 brdp
->bnk2panel
[banknr
] = panelp
;
2193 brdp
->bnkpageaddr
[banknr
] = ++nxtid
;
2194 brdp
->bnkstataddr
[banknr
++] = ioaddr
+
2197 panelp
->nrports
= 8;
2198 panelp
->ackmask
= 0xc0;
2203 ioaddr
+= EREG_BANKSIZE
;
2204 brdp
->nrports
+= panelp
->nrports
;
2205 brdp
->panels
[panelnr
++] = panelp
;
2206 if ((brdp
->brdtype
!= BRD_ECHPCI
) &&
2207 (ioaddr
>= (brdp
->ioaddr2
+ brdp
->iosize2
))) {
2213 brdp
->nrpanels
= panelnr
;
2214 brdp
->nrbnks
= banknr
;
2215 if (brdp
->brdtype
== BRD_ECH
)
2216 outb((brdp
->ioctrlval
| ECH_BRDDISABLE
), brdp
->ioctrl
);
2218 brdp
->state
|= BRD_FOUND
;
2219 if (request_irq(brdp
->irq
, stl_intr
, IRQF_SHARED
, name
, brdp
) != 0) {
2220 printk("STALLION: failed to register interrupt "
2221 "routine for %s irq=%d\n", name
, brdp
->irq
);
2228 stl_cleanup_panels(brdp
);
2229 if (brdp
->iosize2
> 0)
2230 release_region(brdp
->ioaddr2
, brdp
->iosize2
);
2232 release_region(brdp
->ioaddr1
, brdp
->iosize1
);
2237 /*****************************************************************************/
2240 * Initialize and configure the specified board.
2241 * Scan through all the boards in the configuration and see what we
2242 * can find. Handle EIO and the ECH boards a little differently here
2243 * since the initial search and setup is very different.
2246 static int __devinit
stl_brdinit(struct stlbrd
*brdp
)
2250 pr_debug("stl_brdinit(brdp=%p)\n", brdp
);
2252 switch (brdp
->brdtype
) {
2255 retval
= stl_initeio(brdp
);
2263 retval
= stl_initech(brdp
);
2268 printk("STALLION: board=%d is unknown board type=%d\n",
2269 brdp
->brdnr
, brdp
->brdtype
);
2274 if ((brdp
->state
& BRD_FOUND
) == 0) {
2275 printk("STALLION: %s board not found, board=%d io=%x irq=%d\n",
2276 stl_brdnames
[brdp
->brdtype
], brdp
->brdnr
,
2277 brdp
->ioaddr1
, brdp
->irq
);
2281 for (i
= 0; i
< STL_MAXPANELS
; i
++)
2282 if (brdp
->panels
[i
] != NULL
)
2283 stl_initports(brdp
, brdp
->panels
[i
]);
2285 printk("STALLION: %s found, board=%d io=%x irq=%d "
2286 "nrpanels=%d nrports=%d\n", stl_brdnames
[brdp
->brdtype
],
2287 brdp
->brdnr
, brdp
->ioaddr1
, brdp
->irq
, brdp
->nrpanels
,
2292 free_irq(brdp
->irq
, brdp
);
2294 stl_cleanup_panels(brdp
);
2296 release_region(brdp
->ioaddr1
, brdp
->iosize1
);
2297 if (brdp
->iosize2
> 0)
2298 release_region(brdp
->ioaddr2
, brdp
->iosize2
);
2303 /*****************************************************************************/
2306 * Find the next available board number that is free.
2309 static int __devinit
stl_getbrdnr(void)
2313 for (i
= 0; i
< STL_MAXBRDS
; i
++)
2314 if (stl_brds
[i
] == NULL
) {
2315 if (i
>= stl_nrbrds
)
2323 /*****************************************************************************/
2325 * We have a Stallion board. Allocate a board structure and
2326 * initialize it. Read its IO and IRQ resources from PCI
2327 * configuration space.
2330 static int __devinit
stl_pciprobe(struct pci_dev
*pdev
,
2331 const struct pci_device_id
*ent
)
2333 struct stlbrd
*brdp
;
2334 unsigned int i
, brdtype
= ent
->driver_data
;
2335 int brdnr
, retval
= -ENODEV
;
2337 if ((pdev
->class >> 8) == PCI_CLASS_STORAGE_IDE
)
2340 retval
= pci_enable_device(pdev
);
2343 brdp
= stl_allocbrd();
2348 mutex_lock(&stl_brdslock
);
2349 brdnr
= stl_getbrdnr();
2351 dev_err(&pdev
->dev
, "too many boards found, "
2352 "maximum supported %d\n", STL_MAXBRDS
);
2353 mutex_unlock(&stl_brdslock
);
2357 brdp
->brdnr
= (unsigned int)brdnr
;
2358 stl_brds
[brdp
->brdnr
] = brdp
;
2359 mutex_unlock(&stl_brdslock
);
2361 brdp
->brdtype
= brdtype
;
2362 brdp
->state
|= STL_PROBED
;
2365 * We have all resources from the board, so let's setup the actual
2366 * board structure now.
2370 brdp
->ioaddr2
= pci_resource_start(pdev
, 0);
2371 brdp
->ioaddr1
= pci_resource_start(pdev
, 1);
2374 brdp
->ioaddr2
= pci_resource_start(pdev
, 2);
2375 brdp
->ioaddr1
= pci_resource_start(pdev
, 1);
2378 brdp
->ioaddr1
= pci_resource_start(pdev
, 2);
2379 brdp
->ioaddr2
= pci_resource_start(pdev
, 1);
2382 dev_err(&pdev
->dev
, "unknown PCI board type=%u\n", brdtype
);
2386 brdp
->irq
= pdev
->irq
;
2387 retval
= stl_brdinit(brdp
);
2391 pci_set_drvdata(pdev
, brdp
);
2393 for (i
= 0; i
< brdp
->nrports
; i
++)
2394 tty_register_device(stl_serial
,
2395 brdp
->brdnr
* STL_MAXPORTS
+ i
, &pdev
->dev
);
2399 stl_brds
[brdp
->brdnr
] = NULL
;
2406 static void __devexit
stl_pciremove(struct pci_dev
*pdev
)
2408 struct stlbrd
*brdp
= pci_get_drvdata(pdev
);
2411 free_irq(brdp
->irq
, brdp
);
2413 stl_cleanup_panels(brdp
);
2415 release_region(brdp
->ioaddr1
, brdp
->iosize1
);
2416 if (brdp
->iosize2
> 0)
2417 release_region(brdp
->ioaddr2
, brdp
->iosize2
);
2419 for (i
= 0; i
< brdp
->nrports
; i
++)
2420 tty_unregister_device(stl_serial
,
2421 brdp
->brdnr
* STL_MAXPORTS
+ i
);
2423 stl_brds
[brdp
->brdnr
] = NULL
;
2427 static struct pci_driver stl_pcidriver
= {
2429 .id_table
= stl_pcibrds
,
2430 .probe
= stl_pciprobe
,
2431 .remove
= __devexit_p(stl_pciremove
)
2434 /*****************************************************************************/
2437 * Return the board stats structure to user app.
2440 static int stl_getbrdstats(combrd_t __user
*bp
)
2442 combrd_t stl_brdstats
;
2443 struct stlbrd
*brdp
;
2444 struct stlpanel
*panelp
;
2447 if (copy_from_user(&stl_brdstats
, bp
, sizeof(combrd_t
)))
2449 if (stl_brdstats
.brd
>= STL_MAXBRDS
)
2451 brdp
= stl_brds
[stl_brdstats
.brd
];
2455 memset(&stl_brdstats
, 0, sizeof(combrd_t
));
2456 stl_brdstats
.brd
= brdp
->brdnr
;
2457 stl_brdstats
.type
= brdp
->brdtype
;
2458 stl_brdstats
.hwid
= brdp
->hwid
;
2459 stl_brdstats
.state
= brdp
->state
;
2460 stl_brdstats
.ioaddr
= brdp
->ioaddr1
;
2461 stl_brdstats
.ioaddr2
= brdp
->ioaddr2
;
2462 stl_brdstats
.irq
= brdp
->irq
;
2463 stl_brdstats
.nrpanels
= brdp
->nrpanels
;
2464 stl_brdstats
.nrports
= brdp
->nrports
;
2465 for (i
= 0; i
< brdp
->nrpanels
; i
++) {
2466 panelp
= brdp
->panels
[i
];
2467 stl_brdstats
.panels
[i
].panel
= i
;
2468 stl_brdstats
.panels
[i
].hwid
= panelp
->hwid
;
2469 stl_brdstats
.panels
[i
].nrports
= panelp
->nrports
;
2472 return copy_to_user(bp
, &stl_brdstats
, sizeof(combrd_t
)) ? -EFAULT
: 0;
2475 /*****************************************************************************/
2478 * Resolve the referenced port number into a port struct pointer.
2481 static struct stlport
*stl_getport(int brdnr
, int panelnr
, int portnr
)
2483 struct stlbrd
*brdp
;
2484 struct stlpanel
*panelp
;
2486 if (brdnr
< 0 || brdnr
>= STL_MAXBRDS
)
2488 brdp
= stl_brds
[brdnr
];
2491 if (panelnr
< 0 || (unsigned int)panelnr
>= brdp
->nrpanels
)
2493 panelp
= brdp
->panels
[panelnr
];
2496 if (portnr
< 0 || (unsigned int)portnr
>= panelp
->nrports
)
2498 return panelp
->ports
[portnr
];
2501 /*****************************************************************************/
2504 * Return the port stats structure to user app. A NULL port struct
2505 * pointer passed in means that we need to find out from the app
2506 * what port to get stats for (used through board control device).
2509 static int stl_getportstats(struct tty_struct
*tty
, struct stlport
*portp
, comstats_t __user
*cp
)
2511 comstats_t stl_comstats
;
2512 unsigned char *head
, *tail
;
2513 unsigned long flags
;
2516 if (copy_from_user(&stl_comstats
, cp
, sizeof(comstats_t
)))
2518 portp
= stl_getport(stl_comstats
.brd
, stl_comstats
.panel
,
2524 portp
->stats
.state
= portp
->istate
;
2525 portp
->stats
.flags
= portp
->port
.flags
;
2526 portp
->stats
.hwid
= portp
->hwid
;
2528 portp
->stats
.ttystate
= 0;
2529 portp
->stats
.cflags
= 0;
2530 portp
->stats
.iflags
= 0;
2531 portp
->stats
.oflags
= 0;
2532 portp
->stats
.lflags
= 0;
2533 portp
->stats
.rxbuffered
= 0;
2535 spin_lock_irqsave(&stallion_lock
, flags
);
2536 if (tty
!= NULL
&& portp
->port
.tty
== tty
) {
2537 portp
->stats
.ttystate
= tty
->flags
;
2538 /* No longer available as a statistic */
2539 portp
->stats
.rxbuffered
= 1; /*tty->flip.count; */
2540 if (tty
->termios
!= NULL
) {
2541 portp
->stats
.cflags
= tty
->termios
->c_cflag
;
2542 portp
->stats
.iflags
= tty
->termios
->c_iflag
;
2543 portp
->stats
.oflags
= tty
->termios
->c_oflag
;
2544 portp
->stats
.lflags
= tty
->termios
->c_lflag
;
2547 spin_unlock_irqrestore(&stallion_lock
, flags
);
2549 head
= portp
->tx
.head
;
2550 tail
= portp
->tx
.tail
;
2551 portp
->stats
.txbuffered
= (head
>= tail
) ? (head
- tail
) :
2552 (STL_TXBUFSIZE
- (tail
- head
));
2554 portp
->stats
.signals
= (unsigned long) stl_getsignals(portp
);
2556 return copy_to_user(cp
, &portp
->stats
,
2557 sizeof(comstats_t
)) ? -EFAULT
: 0;
2560 /*****************************************************************************/
2563 * Clear the port stats structure. We also return it zeroed out...
2566 static int stl_clrportstats(struct stlport
*portp
, comstats_t __user
*cp
)
2568 comstats_t stl_comstats
;
2571 if (copy_from_user(&stl_comstats
, cp
, sizeof(comstats_t
)))
2573 portp
= stl_getport(stl_comstats
.brd
, stl_comstats
.panel
,
2579 memset(&portp
->stats
, 0, sizeof(comstats_t
));
2580 portp
->stats
.brd
= portp
->brdnr
;
2581 portp
->stats
.panel
= portp
->panelnr
;
2582 portp
->stats
.port
= portp
->portnr
;
2583 return copy_to_user(cp
, &portp
->stats
,
2584 sizeof(comstats_t
)) ? -EFAULT
: 0;
2587 /*****************************************************************************/
2590 * Return the entire driver ports structure to a user app.
2593 static int stl_getportstruct(struct stlport __user
*arg
)
2595 struct stlport stl_dummyport
;
2596 struct stlport
*portp
;
2598 if (copy_from_user(&stl_dummyport
, arg
, sizeof(struct stlport
)))
2600 portp
= stl_getport(stl_dummyport
.brdnr
, stl_dummyport
.panelnr
,
2601 stl_dummyport
.portnr
);
2604 return copy_to_user(arg
, portp
, sizeof(struct stlport
)) ? -EFAULT
: 0;
2607 /*****************************************************************************/
2610 * Return the entire driver board structure to a user app.
2613 static int stl_getbrdstruct(struct stlbrd __user
*arg
)
2615 struct stlbrd stl_dummybrd
;
2616 struct stlbrd
*brdp
;
2618 if (copy_from_user(&stl_dummybrd
, arg
, sizeof(struct stlbrd
)))
2620 if (stl_dummybrd
.brdnr
>= STL_MAXBRDS
)
2622 brdp
= stl_brds
[stl_dummybrd
.brdnr
];
2625 return copy_to_user(arg
, brdp
, sizeof(struct stlbrd
)) ? -EFAULT
: 0;
2628 /*****************************************************************************/
2631 * The "staliomem" device is also required to do some special operations
2632 * on the board and/or ports. In this driver it is mostly used for stats
2636 static int stl_memioctl(struct inode
*ip
, struct file
*fp
, unsigned int cmd
, unsigned long arg
)
2639 void __user
*argp
= (void __user
*)arg
;
2641 pr_debug("stl_memioctl(ip=%p,fp=%p,cmd=%x,arg=%lx)\n", ip
, fp
, cmd
,arg
);
2644 if (brdnr
>= STL_MAXBRDS
)
2649 case COM_GETPORTSTATS
:
2650 rc
= stl_getportstats(NULL
, NULL
, argp
);
2652 case COM_CLRPORTSTATS
:
2653 rc
= stl_clrportstats(NULL
, argp
);
2655 case COM_GETBRDSTATS
:
2656 rc
= stl_getbrdstats(argp
);
2659 rc
= stl_getportstruct(argp
);
2662 rc
= stl_getbrdstruct(argp
);
2672 static const struct tty_operations stl_ops
= {
2676 .put_char
= stl_putchar
,
2677 .flush_chars
= stl_flushchars
,
2678 .write_room
= stl_writeroom
,
2679 .chars_in_buffer
= stl_charsinbuffer
,
2681 .set_termios
= stl_settermios
,
2682 .throttle
= stl_throttle
,
2683 .unthrottle
= stl_unthrottle
,
2686 .hangup
= stl_hangup
,
2687 .flush_buffer
= stl_flushbuffer
,
2688 .break_ctl
= stl_breakctl
,
2689 .wait_until_sent
= stl_waituntilsent
,
2690 .send_xchar
= stl_sendxchar
,
2691 .read_proc
= stl_readproc
,
2692 .tiocmget
= stl_tiocmget
,
2693 .tiocmset
= stl_tiocmset
,
2696 /*****************************************************************************/
2697 /* CD1400 HARDWARE FUNCTIONS */
2698 /*****************************************************************************/
2701 * These functions get/set/update the registers of the cd1400 UARTs.
2702 * Access to the cd1400 registers is via an address/data io port pair.
2703 * (Maybe should make this inline...)
2706 static int stl_cd1400getreg(struct stlport
*portp
, int regnr
)
2708 outb((regnr
+ portp
->uartaddr
), portp
->ioaddr
);
2709 return inb(portp
->ioaddr
+ EREG_DATA
);
2712 static void stl_cd1400setreg(struct stlport
*portp
, int regnr
, int value
)
2714 outb(regnr
+ portp
->uartaddr
, portp
->ioaddr
);
2715 outb(value
, portp
->ioaddr
+ EREG_DATA
);
2718 static int stl_cd1400updatereg(struct stlport
*portp
, int regnr
, int value
)
2720 outb(regnr
+ portp
->uartaddr
, portp
->ioaddr
);
2721 if (inb(portp
->ioaddr
+ EREG_DATA
) != value
) {
2722 outb(value
, portp
->ioaddr
+ EREG_DATA
);
2728 /*****************************************************************************/
2731 * Inbitialize the UARTs in a panel. We don't care what sort of board
2732 * these ports are on - since the port io registers are almost
2733 * identical when dealing with ports.
2736 static int stl_cd1400panelinit(struct stlbrd
*brdp
, struct stlpanel
*panelp
)
2740 int nrchips
, uartaddr
, ioaddr
;
2741 unsigned long flags
;
2743 pr_debug("stl_panelinit(brdp=%p,panelp=%p)\n", brdp
, panelp
);
2745 spin_lock_irqsave(&brd_lock
, flags
);
2746 BRDENABLE(panelp
->brdnr
, panelp
->pagenr
);
2749 * Check that each chip is present and started up OK.
2752 nrchips
= panelp
->nrports
/ CD1400_PORTS
;
2753 for (i
= 0; i
< nrchips
; i
++) {
2754 if (brdp
->brdtype
== BRD_ECHPCI
) {
2755 outb((panelp
->pagenr
+ (i
>> 1)), brdp
->ioctrl
);
2756 ioaddr
= panelp
->iobase
;
2758 ioaddr
= panelp
->iobase
+ (EREG_BANKSIZE
* (i
>> 1));
2759 uartaddr
= (i
& 0x01) ? 0x080 : 0;
2760 outb((GFRCR
+ uartaddr
), ioaddr
);
2761 outb(0, (ioaddr
+ EREG_DATA
));
2762 outb((CCR
+ uartaddr
), ioaddr
);
2763 outb(CCR_RESETFULL
, (ioaddr
+ EREG_DATA
));
2764 outb(CCR_RESETFULL
, (ioaddr
+ EREG_DATA
));
2765 outb((GFRCR
+ uartaddr
), ioaddr
);
2766 for (j
= 0; j
< CCR_MAXWAIT
; j
++)
2767 if ((gfrcr
= inb(ioaddr
+ EREG_DATA
)) != 0)
2770 if ((j
>= CCR_MAXWAIT
) || (gfrcr
< 0x40) || (gfrcr
> 0x60)) {
2771 printk("STALLION: cd1400 not responding, "
2772 "brd=%d panel=%d chip=%d\n",
2773 panelp
->brdnr
, panelp
->panelnr
, i
);
2776 chipmask
|= (0x1 << i
);
2777 outb((PPR
+ uartaddr
), ioaddr
);
2778 outb(PPR_SCALAR
, (ioaddr
+ EREG_DATA
));
2781 BRDDISABLE(panelp
->brdnr
);
2782 spin_unlock_irqrestore(&brd_lock
, flags
);
2786 /*****************************************************************************/
2789 * Initialize hardware specific port registers.
2792 static void stl_cd1400portinit(struct stlbrd
*brdp
, struct stlpanel
*panelp
, struct stlport
*portp
)
2794 unsigned long flags
;
2795 pr_debug("stl_cd1400portinit(brdp=%p,panelp=%p,portp=%p)\n", brdp
,
2798 if ((brdp
== NULL
) || (panelp
== NULL
) ||
2802 spin_lock_irqsave(&brd_lock
, flags
);
2803 portp
->ioaddr
= panelp
->iobase
+ (((brdp
->brdtype
== BRD_ECHPCI
) ||
2804 (portp
->portnr
< 8)) ? 0 : EREG_BANKSIZE
);
2805 portp
->uartaddr
= (portp
->portnr
& 0x04) << 5;
2806 portp
->pagenr
= panelp
->pagenr
+ (portp
->portnr
>> 3);
2808 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
2809 stl_cd1400setreg(portp
, CAR
, (portp
->portnr
& 0x03));
2810 stl_cd1400setreg(portp
, LIVR
, (portp
->portnr
<< 3));
2811 portp
->hwid
= stl_cd1400getreg(portp
, GFRCR
);
2812 BRDDISABLE(portp
->brdnr
);
2813 spin_unlock_irqrestore(&brd_lock
, flags
);
2816 /*****************************************************************************/
2819 * Wait for the command register to be ready. We will poll this,
2820 * since it won't usually take too long to be ready.
2823 static void stl_cd1400ccrwait(struct stlport
*portp
)
2827 for (i
= 0; i
< CCR_MAXWAIT
; i
++)
2828 if (stl_cd1400getreg(portp
, CCR
) == 0)
2831 printk("STALLION: cd1400 not responding, port=%d panel=%d brd=%d\n",
2832 portp
->portnr
, portp
->panelnr
, portp
->brdnr
);
2835 /*****************************************************************************/
2838 * Set up the cd1400 registers for a port based on the termios port
2842 static void stl_cd1400setport(struct stlport
*portp
, struct ktermios
*tiosp
)
2844 struct stlbrd
*brdp
;
2845 unsigned long flags
;
2846 unsigned int clkdiv
, baudrate
;
2847 unsigned char cor1
, cor2
, cor3
;
2848 unsigned char cor4
, cor5
, ccr
;
2849 unsigned char srer
, sreron
, sreroff
;
2850 unsigned char mcor1
, mcor2
, rtpr
;
2851 unsigned char clk
, div
;
2867 brdp
= stl_brds
[portp
->brdnr
];
2872 * Set up the RX char ignore mask with those RX error types we
2873 * can ignore. We can get the cd1400 to help us out a little here,
2874 * it will ignore parity errors and breaks for us.
2876 portp
->rxignoremsk
= 0;
2877 if (tiosp
->c_iflag
& IGNPAR
) {
2878 portp
->rxignoremsk
|= (ST_PARITY
| ST_FRAMING
| ST_OVERRUN
);
2879 cor1
|= COR1_PARIGNORE
;
2881 if (tiosp
->c_iflag
& IGNBRK
) {
2882 portp
->rxignoremsk
|= ST_BREAK
;
2883 cor4
|= COR4_IGNBRK
;
2886 portp
->rxmarkmsk
= ST_OVERRUN
;
2887 if (tiosp
->c_iflag
& (INPCK
| PARMRK
))
2888 portp
->rxmarkmsk
|= (ST_PARITY
| ST_FRAMING
);
2889 if (tiosp
->c_iflag
& BRKINT
)
2890 portp
->rxmarkmsk
|= ST_BREAK
;
2893 * Go through the char size, parity and stop bits and set all the
2894 * option register appropriately.
2896 switch (tiosp
->c_cflag
& CSIZE
) {
2911 if (tiosp
->c_cflag
& CSTOPB
)
2916 if (tiosp
->c_cflag
& PARENB
) {
2917 if (tiosp
->c_cflag
& PARODD
)
2918 cor1
|= (COR1_PARENB
| COR1_PARODD
);
2920 cor1
|= (COR1_PARENB
| COR1_PAREVEN
);
2922 cor1
|= COR1_PARNONE
;
2926 * Set the RX FIFO threshold at 6 chars. This gives a bit of breathing
2927 * space for hardware flow control and the like. This should be set to
2928 * VMIN. Also here we will set the RX data timeout to 10ms - this should
2929 * really be based on VTIME.
2931 cor3
|= FIFO_RXTHRESHOLD
;
2935 * Calculate the baud rate timers. For now we will just assume that
2936 * the input and output baud are the same. Could have used a baud
2937 * table here, but this way we can generate virtually any baud rate
2940 baudrate
= tiosp
->c_cflag
& CBAUD
;
2941 if (baudrate
& CBAUDEX
) {
2942 baudrate
&= ~CBAUDEX
;
2943 if ((baudrate
< 1) || (baudrate
> 4))
2944 tiosp
->c_cflag
&= ~CBAUDEX
;
2948 baudrate
= stl_baudrates
[baudrate
];
2949 if ((tiosp
->c_cflag
& CBAUD
) == B38400
) {
2950 if ((portp
->port
.flags
& ASYNC_SPD_MASK
) == ASYNC_SPD_HI
)
2952 else if ((portp
->port
.flags
& ASYNC_SPD_MASK
) == ASYNC_SPD_VHI
)
2954 else if ((portp
->port
.flags
& ASYNC_SPD_MASK
) == ASYNC_SPD_SHI
)
2956 else if ((portp
->port
.flags
& ASYNC_SPD_MASK
) == ASYNC_SPD_WARP
)
2958 else if ((portp
->port
.flags
& ASYNC_SPD_MASK
) == ASYNC_SPD_CUST
)
2959 baudrate
= (portp
->baud_base
/ portp
->custom_divisor
);
2961 if (baudrate
> STL_CD1400MAXBAUD
)
2962 baudrate
= STL_CD1400MAXBAUD
;
2965 for (clk
= 0; clk
< CD1400_NUMCLKS
; clk
++) {
2966 clkdiv
= (portp
->clk
/ stl_cd1400clkdivs
[clk
]) / baudrate
;
2970 div
= (unsigned char) clkdiv
;
2974 * Check what form of modem signaling is required and set it up.
2976 if ((tiosp
->c_cflag
& CLOCAL
) == 0) {
2979 sreron
|= SRER_MODEM
;
2980 portp
->port
.flags
|= ASYNC_CHECK_CD
;
2982 portp
->port
.flags
&= ~ASYNC_CHECK_CD
;
2985 * Setup cd1400 enhanced modes if we can. In particular we want to
2986 * handle as much of the flow control as possible automatically. As
2987 * well as saving a few CPU cycles it will also greatly improve flow
2988 * control reliability.
2990 if (tiosp
->c_iflag
& IXON
) {
2993 if (tiosp
->c_iflag
& IXANY
)
2997 if (tiosp
->c_cflag
& CRTSCTS
) {
2999 mcor1
|= FIFO_RTSTHRESHOLD
;
3003 * All cd1400 register values calculated so go through and set
3007 pr_debug("SETPORT: portnr=%d panelnr=%d brdnr=%d\n",
3008 portp
->portnr
, portp
->panelnr
, portp
->brdnr
);
3009 pr_debug(" cor1=%x cor2=%x cor3=%x cor4=%x cor5=%x\n",
3010 cor1
, cor2
, cor3
, cor4
, cor5
);
3011 pr_debug(" mcor1=%x mcor2=%x rtpr=%x sreron=%x sreroff=%x\n",
3012 mcor1
, mcor2
, rtpr
, sreron
, sreroff
);
3013 pr_debug(" tcor=%x tbpr=%x rcor=%x rbpr=%x\n", clk
, div
, clk
, div
);
3014 pr_debug(" schr1=%x schr2=%x schr3=%x schr4=%x\n",
3015 tiosp
->c_cc
[VSTART
], tiosp
->c_cc
[VSTOP
],
3016 tiosp
->c_cc
[VSTART
], tiosp
->c_cc
[VSTOP
]);
3018 spin_lock_irqsave(&brd_lock
, flags
);
3019 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
3020 stl_cd1400setreg(portp
, CAR
, (portp
->portnr
& 0x3));
3021 srer
= stl_cd1400getreg(portp
, SRER
);
3022 stl_cd1400setreg(portp
, SRER
, 0);
3023 if (stl_cd1400updatereg(portp
, COR1
, cor1
))
3025 if (stl_cd1400updatereg(portp
, COR2
, cor2
))
3027 if (stl_cd1400updatereg(portp
, COR3
, cor3
))
3030 stl_cd1400ccrwait(portp
);
3031 stl_cd1400setreg(portp
, CCR
, CCR_CORCHANGE
);
3033 stl_cd1400setreg(portp
, COR4
, cor4
);
3034 stl_cd1400setreg(portp
, COR5
, cor5
);
3035 stl_cd1400setreg(portp
, MCOR1
, mcor1
);
3036 stl_cd1400setreg(portp
, MCOR2
, mcor2
);
3038 stl_cd1400setreg(portp
, TCOR
, clk
);
3039 stl_cd1400setreg(portp
, TBPR
, div
);
3040 stl_cd1400setreg(portp
, RCOR
, clk
);
3041 stl_cd1400setreg(portp
, RBPR
, div
);
3043 stl_cd1400setreg(portp
, SCHR1
, tiosp
->c_cc
[VSTART
]);
3044 stl_cd1400setreg(portp
, SCHR2
, tiosp
->c_cc
[VSTOP
]);
3045 stl_cd1400setreg(portp
, SCHR3
, tiosp
->c_cc
[VSTART
]);
3046 stl_cd1400setreg(portp
, SCHR4
, tiosp
->c_cc
[VSTOP
]);
3047 stl_cd1400setreg(portp
, RTPR
, rtpr
);
3048 mcor1
= stl_cd1400getreg(portp
, MSVR1
);
3049 if (mcor1
& MSVR1_DCD
)
3050 portp
->sigs
|= TIOCM_CD
;
3052 portp
->sigs
&= ~TIOCM_CD
;
3053 stl_cd1400setreg(portp
, SRER
, ((srer
& ~sreroff
) | sreron
));
3054 BRDDISABLE(portp
->brdnr
);
3055 spin_unlock_irqrestore(&brd_lock
, flags
);
3058 /*****************************************************************************/
3061 * Set the state of the DTR and RTS signals.
3064 static void stl_cd1400setsignals(struct stlport
*portp
, int dtr
, int rts
)
3066 unsigned char msvr1
, msvr2
;
3067 unsigned long flags
;
3069 pr_debug("stl_cd1400setsignals(portp=%p,dtr=%d,rts=%d)\n",
3079 spin_lock_irqsave(&brd_lock
, flags
);
3080 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
3081 stl_cd1400setreg(portp
, CAR
, (portp
->portnr
& 0x03));
3083 stl_cd1400setreg(portp
, MSVR2
, msvr2
);
3085 stl_cd1400setreg(portp
, MSVR1
, msvr1
);
3086 BRDDISABLE(portp
->brdnr
);
3087 spin_unlock_irqrestore(&brd_lock
, flags
);
3090 /*****************************************************************************/
3093 * Return the state of the signals.
3096 static int stl_cd1400getsignals(struct stlport
*portp
)
3098 unsigned char msvr1
, msvr2
;
3099 unsigned long flags
;
3102 pr_debug("stl_cd1400getsignals(portp=%p)\n", portp
);
3104 spin_lock_irqsave(&brd_lock
, flags
);
3105 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
3106 stl_cd1400setreg(portp
, CAR
, (portp
->portnr
& 0x03));
3107 msvr1
= stl_cd1400getreg(portp
, MSVR1
);
3108 msvr2
= stl_cd1400getreg(portp
, MSVR2
);
3109 BRDDISABLE(portp
->brdnr
);
3110 spin_unlock_irqrestore(&brd_lock
, flags
);
3113 sigs
|= (msvr1
& MSVR1_DCD
) ? TIOCM_CD
: 0;
3114 sigs
|= (msvr1
& MSVR1_CTS
) ? TIOCM_CTS
: 0;
3115 sigs
|= (msvr1
& MSVR1_DTR
) ? TIOCM_DTR
: 0;
3116 sigs
|= (msvr2
& MSVR2_RTS
) ? TIOCM_RTS
: 0;
3118 sigs
|= (msvr1
& MSVR1_RI
) ? TIOCM_RI
: 0;
3119 sigs
|= (msvr1
& MSVR1_DSR
) ? TIOCM_DSR
: 0;
3126 /*****************************************************************************/
3129 * Enable/Disable the Transmitter and/or Receiver.
3132 static void stl_cd1400enablerxtx(struct stlport
*portp
, int rx
, int tx
)
3135 unsigned long flags
;
3137 pr_debug("stl_cd1400enablerxtx(portp=%p,rx=%d,tx=%d)\n", portp
, rx
, tx
);
3142 ccr
|= CCR_TXDISABLE
;
3144 ccr
|= CCR_TXENABLE
;
3146 ccr
|= CCR_RXDISABLE
;
3148 ccr
|= CCR_RXENABLE
;
3150 spin_lock_irqsave(&brd_lock
, flags
);
3151 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
3152 stl_cd1400setreg(portp
, CAR
, (portp
->portnr
& 0x03));
3153 stl_cd1400ccrwait(portp
);
3154 stl_cd1400setreg(portp
, CCR
, ccr
);
3155 stl_cd1400ccrwait(portp
);
3156 BRDDISABLE(portp
->brdnr
);
3157 spin_unlock_irqrestore(&brd_lock
, flags
);
3160 /*****************************************************************************/
3163 * Start/stop the Transmitter and/or Receiver.
3166 static void stl_cd1400startrxtx(struct stlport
*portp
, int rx
, int tx
)
3168 unsigned char sreron
, sreroff
;
3169 unsigned long flags
;
3171 pr_debug("stl_cd1400startrxtx(portp=%p,rx=%d,tx=%d)\n", portp
, rx
, tx
);
3176 sreroff
|= (SRER_TXDATA
| SRER_TXEMPTY
);
3178 sreron
|= SRER_TXDATA
;
3180 sreron
|= SRER_TXEMPTY
;
3182 sreroff
|= SRER_RXDATA
;
3184 sreron
|= SRER_RXDATA
;
3186 spin_lock_irqsave(&brd_lock
, flags
);
3187 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
3188 stl_cd1400setreg(portp
, CAR
, (portp
->portnr
& 0x03));
3189 stl_cd1400setreg(portp
, SRER
,
3190 ((stl_cd1400getreg(portp
, SRER
) & ~sreroff
) | sreron
));
3191 BRDDISABLE(portp
->brdnr
);
3193 set_bit(ASYI_TXBUSY
, &portp
->istate
);
3194 spin_unlock_irqrestore(&brd_lock
, flags
);
3197 /*****************************************************************************/
3200 * Disable all interrupts from this port.
3203 static void stl_cd1400disableintrs(struct stlport
*portp
)
3205 unsigned long flags
;
3207 pr_debug("stl_cd1400disableintrs(portp=%p)\n", portp
);
3209 spin_lock_irqsave(&brd_lock
, flags
);
3210 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
3211 stl_cd1400setreg(portp
, CAR
, (portp
->portnr
& 0x03));
3212 stl_cd1400setreg(portp
, SRER
, 0);
3213 BRDDISABLE(portp
->brdnr
);
3214 spin_unlock_irqrestore(&brd_lock
, flags
);
3217 /*****************************************************************************/
3219 static void stl_cd1400sendbreak(struct stlport
*portp
, int len
)
3221 unsigned long flags
;
3223 pr_debug("stl_cd1400sendbreak(portp=%p,len=%d)\n", portp
, len
);
3225 spin_lock_irqsave(&brd_lock
, flags
);
3226 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
3227 stl_cd1400setreg(portp
, CAR
, (portp
->portnr
& 0x03));
3228 stl_cd1400setreg(portp
, SRER
,
3229 ((stl_cd1400getreg(portp
, SRER
) & ~SRER_TXDATA
) |
3231 BRDDISABLE(portp
->brdnr
);
3232 portp
->brklen
= len
;
3234 portp
->stats
.txbreaks
++;
3235 spin_unlock_irqrestore(&brd_lock
, flags
);
3238 /*****************************************************************************/
3241 * Take flow control actions...
3244 static void stl_cd1400flowctrl(struct stlport
*portp
, int state
)
3246 struct tty_struct
*tty
;
3247 unsigned long flags
;
3249 pr_debug("stl_cd1400flowctrl(portp=%p,state=%x)\n", portp
, state
);
3253 tty
= tty_port_tty_get(&portp
->port
);
3257 spin_lock_irqsave(&brd_lock
, flags
);
3258 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
3259 stl_cd1400setreg(portp
, CAR
, (portp
->portnr
& 0x03));
3262 if (tty
->termios
->c_iflag
& IXOFF
) {
3263 stl_cd1400ccrwait(portp
);
3264 stl_cd1400setreg(portp
, CCR
, CCR_SENDSCHR1
);
3265 portp
->stats
.rxxon
++;
3266 stl_cd1400ccrwait(portp
);
3269 * Question: should we return RTS to what it was before? It may
3270 * have been set by an ioctl... Suppose not, since if you have
3271 * hardware flow control set then it is pretty silly to go and
3272 * set the RTS line by hand.
3274 if (tty
->termios
->c_cflag
& CRTSCTS
) {
3275 stl_cd1400setreg(portp
, MCOR1
,
3276 (stl_cd1400getreg(portp
, MCOR1
) |
3277 FIFO_RTSTHRESHOLD
));
3278 stl_cd1400setreg(portp
, MSVR2
, MSVR2_RTS
);
3279 portp
->stats
.rxrtson
++;
3282 if (tty
->termios
->c_iflag
& IXOFF
) {
3283 stl_cd1400ccrwait(portp
);
3284 stl_cd1400setreg(portp
, CCR
, CCR_SENDSCHR2
);
3285 portp
->stats
.rxxoff
++;
3286 stl_cd1400ccrwait(portp
);
3288 if (tty
->termios
->c_cflag
& CRTSCTS
) {
3289 stl_cd1400setreg(portp
, MCOR1
,
3290 (stl_cd1400getreg(portp
, MCOR1
) & 0xf0));
3291 stl_cd1400setreg(portp
, MSVR2
, 0);
3292 portp
->stats
.rxrtsoff
++;
3296 BRDDISABLE(portp
->brdnr
);
3297 spin_unlock_irqrestore(&brd_lock
, flags
);
3301 /*****************************************************************************/
3304 * Send a flow control character...
3307 static void stl_cd1400sendflow(struct stlport
*portp
, int state
)
3309 struct tty_struct
*tty
;
3310 unsigned long flags
;
3312 pr_debug("stl_cd1400sendflow(portp=%p,state=%x)\n", portp
, state
);
3316 tty
= tty_port_tty_get(&portp
->port
);
3320 spin_lock_irqsave(&brd_lock
, flags
);
3321 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
3322 stl_cd1400setreg(portp
, CAR
, (portp
->portnr
& 0x03));
3324 stl_cd1400ccrwait(portp
);
3325 stl_cd1400setreg(portp
, CCR
, CCR_SENDSCHR1
);
3326 portp
->stats
.rxxon
++;
3327 stl_cd1400ccrwait(portp
);
3329 stl_cd1400ccrwait(portp
);
3330 stl_cd1400setreg(portp
, CCR
, CCR_SENDSCHR2
);
3331 portp
->stats
.rxxoff
++;
3332 stl_cd1400ccrwait(portp
);
3334 BRDDISABLE(portp
->brdnr
);
3335 spin_unlock_irqrestore(&brd_lock
, flags
);
3339 /*****************************************************************************/
3341 static void stl_cd1400flush(struct stlport
*portp
)
3343 unsigned long flags
;
3345 pr_debug("stl_cd1400flush(portp=%p)\n", portp
);
3350 spin_lock_irqsave(&brd_lock
, flags
);
3351 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
3352 stl_cd1400setreg(portp
, CAR
, (portp
->portnr
& 0x03));
3353 stl_cd1400ccrwait(portp
);
3354 stl_cd1400setreg(portp
, CCR
, CCR_TXFLUSHFIFO
);
3355 stl_cd1400ccrwait(portp
);
3356 portp
->tx
.tail
= portp
->tx
.head
;
3357 BRDDISABLE(portp
->brdnr
);
3358 spin_unlock_irqrestore(&brd_lock
, flags
);
3361 /*****************************************************************************/
3364 * Return the current state of data flow on this port. This is only
3365 * really interresting when determining if data has fully completed
3366 * transmission or not... This is easy for the cd1400, it accurately
3367 * maintains the busy port flag.
3370 static int stl_cd1400datastate(struct stlport
*portp
)
3372 pr_debug("stl_cd1400datastate(portp=%p)\n", portp
);
3377 return test_bit(ASYI_TXBUSY
, &portp
->istate
) ? 1 : 0;
3380 /*****************************************************************************/
3383 * Interrupt service routine for cd1400 EasyIO boards.
3386 static void stl_cd1400eiointr(struct stlpanel
*panelp
, unsigned int iobase
)
3388 unsigned char svrtype
;
3390 pr_debug("stl_cd1400eiointr(panelp=%p,iobase=%x)\n", panelp
, iobase
);
3392 spin_lock(&brd_lock
);
3394 svrtype
= inb(iobase
+ EREG_DATA
);
3395 if (panelp
->nrports
> 4) {
3396 outb((SVRR
+ 0x80), iobase
);
3397 svrtype
|= inb(iobase
+ EREG_DATA
);
3400 if (svrtype
& SVRR_RX
)
3401 stl_cd1400rxisr(panelp
, iobase
);
3402 else if (svrtype
& SVRR_TX
)
3403 stl_cd1400txisr(panelp
, iobase
);
3404 else if (svrtype
& SVRR_MDM
)
3405 stl_cd1400mdmisr(panelp
, iobase
);
3407 spin_unlock(&brd_lock
);
3410 /*****************************************************************************/
3413 * Interrupt service routine for cd1400 panels.
3416 static void stl_cd1400echintr(struct stlpanel
*panelp
, unsigned int iobase
)
3418 unsigned char svrtype
;
3420 pr_debug("stl_cd1400echintr(panelp=%p,iobase=%x)\n", panelp
, iobase
);
3423 svrtype
= inb(iobase
+ EREG_DATA
);
3424 outb((SVRR
+ 0x80), iobase
);
3425 svrtype
|= inb(iobase
+ EREG_DATA
);
3426 if (svrtype
& SVRR_RX
)
3427 stl_cd1400rxisr(panelp
, iobase
);
3428 else if (svrtype
& SVRR_TX
)
3429 stl_cd1400txisr(panelp
, iobase
);
3430 else if (svrtype
& SVRR_MDM
)
3431 stl_cd1400mdmisr(panelp
, iobase
);
3435 /*****************************************************************************/
3438 * Unfortunately we need to handle breaks in the TX data stream, since
3439 * this is the only way to generate them on the cd1400.
3442 static int stl_cd1400breakisr(struct stlport
*portp
, int ioaddr
)
3444 if (portp
->brklen
== 1) {
3445 outb((COR2
+ portp
->uartaddr
), ioaddr
);
3446 outb((inb(ioaddr
+ EREG_DATA
) | COR2_ETC
),
3447 (ioaddr
+ EREG_DATA
));
3448 outb((TDR
+ portp
->uartaddr
), ioaddr
);
3449 outb(ETC_CMD
, (ioaddr
+ EREG_DATA
));
3450 outb(ETC_STARTBREAK
, (ioaddr
+ EREG_DATA
));
3451 outb((SRER
+ portp
->uartaddr
), ioaddr
);
3452 outb((inb(ioaddr
+ EREG_DATA
) & ~(SRER_TXDATA
| SRER_TXEMPTY
)),
3453 (ioaddr
+ EREG_DATA
));
3455 } else if (portp
->brklen
> 1) {
3456 outb((TDR
+ portp
->uartaddr
), ioaddr
);
3457 outb(ETC_CMD
, (ioaddr
+ EREG_DATA
));
3458 outb(ETC_STOPBREAK
, (ioaddr
+ EREG_DATA
));
3462 outb((COR2
+ portp
->uartaddr
), ioaddr
);
3463 outb((inb(ioaddr
+ EREG_DATA
) & ~COR2_ETC
),
3464 (ioaddr
+ EREG_DATA
));
3470 /*****************************************************************************/
3473 * Transmit interrupt handler. This has gotta be fast! Handling TX
3474 * chars is pretty simple, stuff as many as possible from the TX buffer
3475 * into the cd1400 FIFO. Must also handle TX breaks here, since they
3476 * are embedded as commands in the data stream. Oh no, had to use a goto!
3477 * This could be optimized more, will do when I get time...
3478 * In practice it is possible that interrupts are enabled but that the
3479 * port has been hung up. Need to handle not having any TX buffer here,
3480 * this is done by using the side effect that head and tail will also
3481 * be NULL if the buffer has been freed.
3484 static void stl_cd1400txisr(struct stlpanel
*panelp
, int ioaddr
)
3486 struct stlport
*portp
;
3489 unsigned char ioack
, srer
;
3490 struct tty_struct
*tty
;
3492 pr_debug("stl_cd1400txisr(panelp=%p,ioaddr=%x)\n", panelp
, ioaddr
);
3494 ioack
= inb(ioaddr
+ EREG_TXACK
);
3495 if (((ioack
& panelp
->ackmask
) != 0) ||
3496 ((ioack
& ACK_TYPMASK
) != ACK_TYPTX
)) {
3497 printk("STALLION: bad TX interrupt ack value=%x\n", ioack
);
3500 portp
= panelp
->ports
[(ioack
>> 3)];
3503 * Unfortunately we need to handle breaks in the data stream, since
3504 * this is the only way to generate them on the cd1400. Do it now if
3505 * a break is to be sent.
3507 if (portp
->brklen
!= 0)
3508 if (stl_cd1400breakisr(portp
, ioaddr
))
3511 head
= portp
->tx
.head
;
3512 tail
= portp
->tx
.tail
;
3513 len
= (head
>= tail
) ? (head
- tail
) : (STL_TXBUFSIZE
- (tail
- head
));
3514 if ((len
== 0) || ((len
< STL_TXBUFLOW
) &&
3515 (test_bit(ASYI_TXLOW
, &portp
->istate
) == 0))) {
3516 set_bit(ASYI_TXLOW
, &portp
->istate
);
3517 tty
= tty_port_tty_get(&portp
->port
);
3525 outb((SRER
+ portp
->uartaddr
), ioaddr
);
3526 srer
= inb(ioaddr
+ EREG_DATA
);
3527 if (srer
& SRER_TXDATA
) {
3528 srer
= (srer
& ~SRER_TXDATA
) | SRER_TXEMPTY
;
3530 srer
&= ~(SRER_TXDATA
| SRER_TXEMPTY
);
3531 clear_bit(ASYI_TXBUSY
, &portp
->istate
);
3533 outb(srer
, (ioaddr
+ EREG_DATA
));
3535 len
= min(len
, CD1400_TXFIFOSIZE
);
3536 portp
->stats
.txtotal
+= len
;
3537 stlen
= min_t(unsigned int, len
,
3538 (portp
->tx
.buf
+ STL_TXBUFSIZE
) - tail
);
3539 outb((TDR
+ portp
->uartaddr
), ioaddr
);
3540 outsb((ioaddr
+ EREG_DATA
), tail
, stlen
);
3543 if (tail
>= (portp
->tx
.buf
+ STL_TXBUFSIZE
))
3544 tail
= portp
->tx
.buf
;
3546 outsb((ioaddr
+ EREG_DATA
), tail
, len
);
3549 portp
->tx
.tail
= tail
;
3553 outb((EOSRR
+ portp
->uartaddr
), ioaddr
);
3554 outb(0, (ioaddr
+ EREG_DATA
));
3557 /*****************************************************************************/
3560 * Receive character interrupt handler. Determine if we have good chars
3561 * or bad chars and then process appropriately. Good chars are easy
3562 * just shove the lot into the RX buffer and set all status byte to 0.
3563 * If a bad RX char then process as required. This routine needs to be
3564 * fast! In practice it is possible that we get an interrupt on a port
3565 * that is closed. This can happen on hangups - since they completely
3566 * shutdown a port not in user context. Need to handle this case.
3569 static void stl_cd1400rxisr(struct stlpanel
*panelp
, int ioaddr
)
3571 struct stlport
*portp
;
3572 struct tty_struct
*tty
;
3573 unsigned int ioack
, len
, buflen
;
3574 unsigned char status
;
3577 pr_debug("stl_cd1400rxisr(panelp=%p,ioaddr=%x)\n", panelp
, ioaddr
);
3579 ioack
= inb(ioaddr
+ EREG_RXACK
);
3580 if ((ioack
& panelp
->ackmask
) != 0) {
3581 printk("STALLION: bad RX interrupt ack value=%x\n", ioack
);
3584 portp
= panelp
->ports
[(ioack
>> 3)];
3585 tty
= tty_port_tty_get(&portp
->port
);
3587 if ((ioack
& ACK_TYPMASK
) == ACK_TYPRXGOOD
) {
3588 outb((RDCR
+ portp
->uartaddr
), ioaddr
);
3589 len
= inb(ioaddr
+ EREG_DATA
);
3590 if (tty
== NULL
|| (buflen
= tty_buffer_request_room(tty
, len
)) == 0) {
3591 len
= min_t(unsigned int, len
, sizeof(stl_unwanted
));
3592 outb((RDSR
+ portp
->uartaddr
), ioaddr
);
3593 insb((ioaddr
+ EREG_DATA
), &stl_unwanted
[0], len
);
3594 portp
->stats
.rxlost
+= len
;
3595 portp
->stats
.rxtotal
+= len
;
3597 len
= min(len
, buflen
);
3600 outb((RDSR
+ portp
->uartaddr
), ioaddr
);
3601 tty_prepare_flip_string(tty
, &ptr
, len
);
3602 insb((ioaddr
+ EREG_DATA
), ptr
, len
);
3603 tty_schedule_flip(tty
);
3604 portp
->stats
.rxtotal
+= len
;
3607 } else if ((ioack
& ACK_TYPMASK
) == ACK_TYPRXBAD
) {
3608 outb((RDSR
+ portp
->uartaddr
), ioaddr
);
3609 status
= inb(ioaddr
+ EREG_DATA
);
3610 ch
= inb(ioaddr
+ EREG_DATA
);
3611 if (status
& ST_PARITY
)
3612 portp
->stats
.rxparity
++;
3613 if (status
& ST_FRAMING
)
3614 portp
->stats
.rxframing
++;
3615 if (status
& ST_OVERRUN
)
3616 portp
->stats
.rxoverrun
++;
3617 if (status
& ST_BREAK
)
3618 portp
->stats
.rxbreaks
++;
3619 if (status
& ST_SCHARMASK
) {
3620 if ((status
& ST_SCHARMASK
) == ST_SCHAR1
)
3621 portp
->stats
.txxon
++;
3622 if ((status
& ST_SCHARMASK
) == ST_SCHAR2
)
3623 portp
->stats
.txxoff
++;
3626 if (tty
!= NULL
&& (portp
->rxignoremsk
& status
) == 0) {
3627 if (portp
->rxmarkmsk
& status
) {
3628 if (status
& ST_BREAK
) {
3630 if (portp
->port
.flags
& ASYNC_SAK
) {
3632 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
3634 } else if (status
& ST_PARITY
)
3635 status
= TTY_PARITY
;
3636 else if (status
& ST_FRAMING
)
3638 else if(status
& ST_OVERRUN
)
3639 status
= TTY_OVERRUN
;
3644 tty_insert_flip_char(tty
, ch
, status
);
3645 tty_schedule_flip(tty
);
3648 printk("STALLION: bad RX interrupt ack value=%x\n", ioack
);
3655 outb((EOSRR
+ portp
->uartaddr
), ioaddr
);
3656 outb(0, (ioaddr
+ EREG_DATA
));
3659 /*****************************************************************************/
3662 * Modem interrupt handler. The is called when the modem signal line
3663 * (DCD) has changed state. Leave most of the work to the off-level
3664 * processing routine.
3667 static void stl_cd1400mdmisr(struct stlpanel
*panelp
, int ioaddr
)
3669 struct stlport
*portp
;
3673 pr_debug("stl_cd1400mdmisr(panelp=%p)\n", panelp
);
3675 ioack
= inb(ioaddr
+ EREG_MDACK
);
3676 if (((ioack
& panelp
->ackmask
) != 0) ||
3677 ((ioack
& ACK_TYPMASK
) != ACK_TYPMDM
)) {
3678 printk("STALLION: bad MODEM interrupt ack value=%x\n", ioack
);
3681 portp
= panelp
->ports
[(ioack
>> 3)];
3683 outb((MISR
+ portp
->uartaddr
), ioaddr
);
3684 misr
= inb(ioaddr
+ EREG_DATA
);
3685 if (misr
& MISR_DCD
) {
3686 stl_cd_change(portp
);
3687 portp
->stats
.modem
++;
3690 outb((EOSRR
+ portp
->uartaddr
), ioaddr
);
3691 outb(0, (ioaddr
+ EREG_DATA
));
3694 /*****************************************************************************/
3695 /* SC26198 HARDWARE FUNCTIONS */
3696 /*****************************************************************************/
3699 * These functions get/set/update the registers of the sc26198 UARTs.
3700 * Access to the sc26198 registers is via an address/data io port pair.
3701 * (Maybe should make this inline...)
3704 static int stl_sc26198getreg(struct stlport
*portp
, int regnr
)
3706 outb((regnr
| portp
->uartaddr
), (portp
->ioaddr
+ XP_ADDR
));
3707 return inb(portp
->ioaddr
+ XP_DATA
);
3710 static void stl_sc26198setreg(struct stlport
*portp
, int regnr
, int value
)
3712 outb((regnr
| portp
->uartaddr
), (portp
->ioaddr
+ XP_ADDR
));
3713 outb(value
, (portp
->ioaddr
+ XP_DATA
));
3716 static int stl_sc26198updatereg(struct stlport
*portp
, int regnr
, int value
)
3718 outb((regnr
| portp
->uartaddr
), (portp
->ioaddr
+ XP_ADDR
));
3719 if (inb(portp
->ioaddr
+ XP_DATA
) != value
) {
3720 outb(value
, (portp
->ioaddr
+ XP_DATA
));
3726 /*****************************************************************************/
3729 * Functions to get and set the sc26198 global registers.
3732 static int stl_sc26198getglobreg(struct stlport
*portp
, int regnr
)
3734 outb(regnr
, (portp
->ioaddr
+ XP_ADDR
));
3735 return inb(portp
->ioaddr
+ XP_DATA
);
3739 static void stl_sc26198setglobreg(struct stlport
*portp
, int regnr
, int value
)
3741 outb(regnr
, (portp
->ioaddr
+ XP_ADDR
));
3742 outb(value
, (portp
->ioaddr
+ XP_DATA
));
3746 /*****************************************************************************/
3749 * Inbitialize the UARTs in a panel. We don't care what sort of board
3750 * these ports are on - since the port io registers are almost
3751 * identical when dealing with ports.
3754 static int stl_sc26198panelinit(struct stlbrd
*brdp
, struct stlpanel
*panelp
)
3757 int nrchips
, ioaddr
;
3759 pr_debug("stl_sc26198panelinit(brdp=%p,panelp=%p)\n", brdp
, panelp
);
3761 BRDENABLE(panelp
->brdnr
, panelp
->pagenr
);
3764 * Check that each chip is present and started up OK.
3767 nrchips
= (panelp
->nrports
+ 4) / SC26198_PORTS
;
3768 if (brdp
->brdtype
== BRD_ECHPCI
)
3769 outb(panelp
->pagenr
, brdp
->ioctrl
);
3771 for (i
= 0; i
< nrchips
; i
++) {
3772 ioaddr
= panelp
->iobase
+ (i
* 4);
3773 outb(SCCR
, (ioaddr
+ XP_ADDR
));
3774 outb(CR_RESETALL
, (ioaddr
+ XP_DATA
));
3775 outb(TSTR
, (ioaddr
+ XP_ADDR
));
3776 if (inb(ioaddr
+ XP_DATA
) != 0) {
3777 printk("STALLION: sc26198 not responding, "
3778 "brd=%d panel=%d chip=%d\n",
3779 panelp
->brdnr
, panelp
->panelnr
, i
);
3782 chipmask
|= (0x1 << i
);
3783 outb(GCCR
, (ioaddr
+ XP_ADDR
));
3784 outb(GCCR_IVRTYPCHANACK
, (ioaddr
+ XP_DATA
));
3785 outb(WDTRCR
, (ioaddr
+ XP_ADDR
));
3786 outb(0xff, (ioaddr
+ XP_DATA
));
3789 BRDDISABLE(panelp
->brdnr
);
3793 /*****************************************************************************/
3796 * Initialize hardware specific port registers.
3799 static void stl_sc26198portinit(struct stlbrd
*brdp
, struct stlpanel
*panelp
, struct stlport
*portp
)
3801 pr_debug("stl_sc26198portinit(brdp=%p,panelp=%p,portp=%p)\n", brdp
,
3804 if ((brdp
== NULL
) || (panelp
== NULL
) ||
3808 portp
->ioaddr
= panelp
->iobase
+ ((portp
->portnr
< 8) ? 0 : 4);
3809 portp
->uartaddr
= (portp
->portnr
& 0x07) << 4;
3810 portp
->pagenr
= panelp
->pagenr
;
3813 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
3814 stl_sc26198setreg(portp
, IOPCR
, IOPCR_SETSIGS
);
3815 BRDDISABLE(portp
->brdnr
);
3818 /*****************************************************************************/
3821 * Set up the sc26198 registers for a port based on the termios port
3825 static void stl_sc26198setport(struct stlport
*portp
, struct ktermios
*tiosp
)
3827 struct stlbrd
*brdp
;
3828 unsigned long flags
;
3829 unsigned int baudrate
;
3830 unsigned char mr0
, mr1
, mr2
, clk
;
3831 unsigned char imron
, imroff
, iopr
, ipr
;
3841 brdp
= stl_brds
[portp
->brdnr
];
3846 * Set up the RX char ignore mask with those RX error types we
3849 portp
->rxignoremsk
= 0;
3850 if (tiosp
->c_iflag
& IGNPAR
)
3851 portp
->rxignoremsk
|= (SR_RXPARITY
| SR_RXFRAMING
|
3853 if (tiosp
->c_iflag
& IGNBRK
)
3854 portp
->rxignoremsk
|= SR_RXBREAK
;
3856 portp
->rxmarkmsk
= SR_RXOVERRUN
;
3857 if (tiosp
->c_iflag
& (INPCK
| PARMRK
))
3858 portp
->rxmarkmsk
|= (SR_RXPARITY
| SR_RXFRAMING
);
3859 if (tiosp
->c_iflag
& BRKINT
)
3860 portp
->rxmarkmsk
|= SR_RXBREAK
;
3863 * Go through the char size, parity and stop bits and set all the
3864 * option register appropriately.
3866 switch (tiosp
->c_cflag
& CSIZE
) {
3881 if (tiosp
->c_cflag
& CSTOPB
)
3886 if (tiosp
->c_cflag
& PARENB
) {
3887 if (tiosp
->c_cflag
& PARODD
)
3888 mr1
|= (MR1_PARENB
| MR1_PARODD
);
3890 mr1
|= (MR1_PARENB
| MR1_PAREVEN
);
3894 mr1
|= MR1_ERRBLOCK
;
3897 * Set the RX FIFO threshold at 8 chars. This gives a bit of breathing
3898 * space for hardware flow control and the like. This should be set to
3901 mr2
|= MR2_RXFIFOHALF
;
3904 * Calculate the baud rate timers. For now we will just assume that
3905 * the input and output baud are the same. The sc26198 has a fixed
3906 * baud rate table, so only discrete baud rates possible.
3908 baudrate
= tiosp
->c_cflag
& CBAUD
;
3909 if (baudrate
& CBAUDEX
) {
3910 baudrate
&= ~CBAUDEX
;
3911 if ((baudrate
< 1) || (baudrate
> 4))
3912 tiosp
->c_cflag
&= ~CBAUDEX
;
3916 baudrate
= stl_baudrates
[baudrate
];
3917 if ((tiosp
->c_cflag
& CBAUD
) == B38400
) {
3918 if ((portp
->port
.flags
& ASYNC_SPD_MASK
) == ASYNC_SPD_HI
)
3920 else if ((portp
->port
.flags
& ASYNC_SPD_MASK
) == ASYNC_SPD_VHI
)
3922 else if ((portp
->port
.flags
& ASYNC_SPD_MASK
) == ASYNC_SPD_SHI
)
3924 else if ((portp
->port
.flags
& ASYNC_SPD_MASK
) == ASYNC_SPD_WARP
)
3926 else if ((portp
->port
.flags
& ASYNC_SPD_MASK
) == ASYNC_SPD_CUST
)
3927 baudrate
= (portp
->baud_base
/ portp
->custom_divisor
);
3929 if (baudrate
> STL_SC26198MAXBAUD
)
3930 baudrate
= STL_SC26198MAXBAUD
;
3933 for (clk
= 0; clk
< SC26198_NRBAUDS
; clk
++)
3934 if (baudrate
<= sc26198_baudtable
[clk
])
3938 * Check what form of modem signaling is required and set it up.
3940 if (tiosp
->c_cflag
& CLOCAL
) {
3941 portp
->port
.flags
&= ~ASYNC_CHECK_CD
;
3943 iopr
|= IOPR_DCDCOS
;
3945 portp
->port
.flags
|= ASYNC_CHECK_CD
;
3949 * Setup sc26198 enhanced modes if we can. In particular we want to
3950 * handle as much of the flow control as possible automatically. As
3951 * well as saving a few CPU cycles it will also greatly improve flow
3952 * control reliability.
3954 if (tiosp
->c_iflag
& IXON
) {
3955 mr0
|= MR0_SWFTX
| MR0_SWFT
;
3956 imron
|= IR_XONXOFF
;
3958 imroff
|= IR_XONXOFF
;
3960 if (tiosp
->c_iflag
& IXOFF
)
3963 if (tiosp
->c_cflag
& CRTSCTS
) {
3969 * All sc26198 register values calculated so go through and set
3973 pr_debug("SETPORT: portnr=%d panelnr=%d brdnr=%d\n",
3974 portp
->portnr
, portp
->panelnr
, portp
->brdnr
);
3975 pr_debug(" mr0=%x mr1=%x mr2=%x clk=%x\n", mr0
, mr1
, mr2
, clk
);
3976 pr_debug(" iopr=%x imron=%x imroff=%x\n", iopr
, imron
, imroff
);
3977 pr_debug(" schr1=%x schr2=%x schr3=%x schr4=%x\n",
3978 tiosp
->c_cc
[VSTART
], tiosp
->c_cc
[VSTOP
],
3979 tiosp
->c_cc
[VSTART
], tiosp
->c_cc
[VSTOP
]);
3981 spin_lock_irqsave(&brd_lock
, flags
);
3982 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
3983 stl_sc26198setreg(portp
, IMR
, 0);
3984 stl_sc26198updatereg(portp
, MR0
, mr0
);
3985 stl_sc26198updatereg(portp
, MR1
, mr1
);
3986 stl_sc26198setreg(portp
, SCCR
, CR_RXERRBLOCK
);
3987 stl_sc26198updatereg(portp
, MR2
, mr2
);
3988 stl_sc26198updatereg(portp
, IOPIOR
,
3989 ((stl_sc26198getreg(portp
, IOPIOR
) & ~IPR_CHANGEMASK
) | iopr
));
3992 stl_sc26198setreg(portp
, TXCSR
, clk
);
3993 stl_sc26198setreg(portp
, RXCSR
, clk
);
3996 stl_sc26198setreg(portp
, XONCR
, tiosp
->c_cc
[VSTART
]);
3997 stl_sc26198setreg(portp
, XOFFCR
, tiosp
->c_cc
[VSTOP
]);
3999 ipr
= stl_sc26198getreg(portp
, IPR
);
4001 portp
->sigs
&= ~TIOCM_CD
;
4003 portp
->sigs
|= TIOCM_CD
;
4005 portp
->imr
= (portp
->imr
& ~imroff
) | imron
;
4006 stl_sc26198setreg(portp
, IMR
, portp
->imr
);
4007 BRDDISABLE(portp
->brdnr
);
4008 spin_unlock_irqrestore(&brd_lock
, flags
);
4011 /*****************************************************************************/
4014 * Set the state of the DTR and RTS signals.
4017 static void stl_sc26198setsignals(struct stlport
*portp
, int dtr
, int rts
)
4019 unsigned char iopioron
, iopioroff
;
4020 unsigned long flags
;
4022 pr_debug("stl_sc26198setsignals(portp=%p,dtr=%d,rts=%d)\n", portp
,
4028 iopioroff
|= IPR_DTR
;
4030 iopioron
|= IPR_DTR
;
4032 iopioroff
|= IPR_RTS
;
4034 iopioron
|= IPR_RTS
;
4036 spin_lock_irqsave(&brd_lock
, flags
);
4037 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
4038 stl_sc26198setreg(portp
, IOPIOR
,
4039 ((stl_sc26198getreg(portp
, IOPIOR
) & ~iopioroff
) | iopioron
));
4040 BRDDISABLE(portp
->brdnr
);
4041 spin_unlock_irqrestore(&brd_lock
, flags
);
4044 /*****************************************************************************/
4047 * Return the state of the signals.
4050 static int stl_sc26198getsignals(struct stlport
*portp
)
4053 unsigned long flags
;
4056 pr_debug("stl_sc26198getsignals(portp=%p)\n", portp
);
4058 spin_lock_irqsave(&brd_lock
, flags
);
4059 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
4060 ipr
= stl_sc26198getreg(portp
, IPR
);
4061 BRDDISABLE(portp
->brdnr
);
4062 spin_unlock_irqrestore(&brd_lock
, flags
);
4065 sigs
|= (ipr
& IPR_DCD
) ? 0 : TIOCM_CD
;
4066 sigs
|= (ipr
& IPR_CTS
) ? 0 : TIOCM_CTS
;
4067 sigs
|= (ipr
& IPR_DTR
) ? 0: TIOCM_DTR
;
4068 sigs
|= (ipr
& IPR_RTS
) ? 0: TIOCM_RTS
;
4073 /*****************************************************************************/
4076 * Enable/Disable the Transmitter and/or Receiver.
4079 static void stl_sc26198enablerxtx(struct stlport
*portp
, int rx
, int tx
)
4082 unsigned long flags
;
4084 pr_debug("stl_sc26198enablerxtx(portp=%p,rx=%d,tx=%d)\n", portp
, rx
,tx
);
4086 ccr
= portp
->crenable
;
4088 ccr
&= ~CR_TXENABLE
;
4092 ccr
&= ~CR_RXENABLE
;
4096 spin_lock_irqsave(&brd_lock
, flags
);
4097 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
4098 stl_sc26198setreg(portp
, SCCR
, ccr
);
4099 BRDDISABLE(portp
->brdnr
);
4100 portp
->crenable
= ccr
;
4101 spin_unlock_irqrestore(&brd_lock
, flags
);
4104 /*****************************************************************************/
4107 * Start/stop the Transmitter and/or Receiver.
4110 static void stl_sc26198startrxtx(struct stlport
*portp
, int rx
, int tx
)
4113 unsigned long flags
;
4115 pr_debug("stl_sc26198startrxtx(portp=%p,rx=%d,tx=%d)\n", portp
, rx
, tx
);
4123 imr
&= ~(IR_RXRDY
| IR_RXBREAK
| IR_RXWATCHDOG
);
4125 imr
|= IR_RXRDY
| IR_RXBREAK
| IR_RXWATCHDOG
;
4127 spin_lock_irqsave(&brd_lock
, flags
);
4128 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
4129 stl_sc26198setreg(portp
, IMR
, imr
);
4130 BRDDISABLE(portp
->brdnr
);
4133 set_bit(ASYI_TXBUSY
, &portp
->istate
);
4134 spin_unlock_irqrestore(&brd_lock
, flags
);
4137 /*****************************************************************************/
4140 * Disable all interrupts from this port.
4143 static void stl_sc26198disableintrs(struct stlport
*portp
)
4145 unsigned long flags
;
4147 pr_debug("stl_sc26198disableintrs(portp=%p)\n", portp
);
4149 spin_lock_irqsave(&brd_lock
, flags
);
4150 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
4152 stl_sc26198setreg(portp
, IMR
, 0);
4153 BRDDISABLE(portp
->brdnr
);
4154 spin_unlock_irqrestore(&brd_lock
, flags
);
4157 /*****************************************************************************/
4159 static void stl_sc26198sendbreak(struct stlport
*portp
, int len
)
4161 unsigned long flags
;
4163 pr_debug("stl_sc26198sendbreak(portp=%p,len=%d)\n", portp
, len
);
4165 spin_lock_irqsave(&brd_lock
, flags
);
4166 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
4168 stl_sc26198setreg(portp
, SCCR
, CR_TXSTARTBREAK
);
4169 portp
->stats
.txbreaks
++;
4171 stl_sc26198setreg(portp
, SCCR
, CR_TXSTOPBREAK
);
4173 BRDDISABLE(portp
->brdnr
);
4174 spin_unlock_irqrestore(&brd_lock
, flags
);
4177 /*****************************************************************************/
4180 * Take flow control actions...
4183 static void stl_sc26198flowctrl(struct stlport
*portp
, int state
)
4185 struct tty_struct
*tty
;
4186 unsigned long flags
;
4189 pr_debug("stl_sc26198flowctrl(portp=%p,state=%x)\n", portp
, state
);
4193 tty
= tty_port_tty_get(&portp
->port
);
4197 spin_lock_irqsave(&brd_lock
, flags
);
4198 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
4201 if (tty
->termios
->c_iflag
& IXOFF
) {
4202 mr0
= stl_sc26198getreg(portp
, MR0
);
4203 stl_sc26198setreg(portp
, MR0
, (mr0
& ~MR0_SWFRXTX
));
4204 stl_sc26198setreg(portp
, SCCR
, CR_TXSENDXON
);
4206 portp
->stats
.rxxon
++;
4207 stl_sc26198wait(portp
);
4208 stl_sc26198setreg(portp
, MR0
, mr0
);
4211 * Question: should we return RTS to what it was before? It may
4212 * have been set by an ioctl... Suppose not, since if you have
4213 * hardware flow control set then it is pretty silly to go and
4214 * set the RTS line by hand.
4216 if (tty
->termios
->c_cflag
& CRTSCTS
) {
4217 stl_sc26198setreg(portp
, MR1
,
4218 (stl_sc26198getreg(portp
, MR1
) | MR1_AUTORTS
));
4219 stl_sc26198setreg(portp
, IOPIOR
,
4220 (stl_sc26198getreg(portp
, IOPIOR
) | IOPR_RTS
));
4221 portp
->stats
.rxrtson
++;
4224 if (tty
->termios
->c_iflag
& IXOFF
) {
4225 mr0
= stl_sc26198getreg(portp
, MR0
);
4226 stl_sc26198setreg(portp
, MR0
, (mr0
& ~MR0_SWFRXTX
));
4227 stl_sc26198setreg(portp
, SCCR
, CR_TXSENDXOFF
);
4229 portp
->stats
.rxxoff
++;
4230 stl_sc26198wait(portp
);
4231 stl_sc26198setreg(portp
, MR0
, mr0
);
4233 if (tty
->termios
->c_cflag
& CRTSCTS
) {
4234 stl_sc26198setreg(portp
, MR1
,
4235 (stl_sc26198getreg(portp
, MR1
) & ~MR1_AUTORTS
));
4236 stl_sc26198setreg(portp
, IOPIOR
,
4237 (stl_sc26198getreg(portp
, IOPIOR
) & ~IOPR_RTS
));
4238 portp
->stats
.rxrtsoff
++;
4242 BRDDISABLE(portp
->brdnr
);
4243 spin_unlock_irqrestore(&brd_lock
, flags
);
4247 /*****************************************************************************/
4250 * Send a flow control character.
4253 static void stl_sc26198sendflow(struct stlport
*portp
, int state
)
4255 struct tty_struct
*tty
;
4256 unsigned long flags
;
4259 pr_debug("stl_sc26198sendflow(portp=%p,state=%x)\n", portp
, state
);
4263 tty
= tty_port_tty_get(&portp
->port
);
4267 spin_lock_irqsave(&brd_lock
, flags
);
4268 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
4270 mr0
= stl_sc26198getreg(portp
, MR0
);
4271 stl_sc26198setreg(portp
, MR0
, (mr0
& ~MR0_SWFRXTX
));
4272 stl_sc26198setreg(portp
, SCCR
, CR_TXSENDXON
);
4274 portp
->stats
.rxxon
++;
4275 stl_sc26198wait(portp
);
4276 stl_sc26198setreg(portp
, MR0
, mr0
);
4278 mr0
= stl_sc26198getreg(portp
, MR0
);
4279 stl_sc26198setreg(portp
, MR0
, (mr0
& ~MR0_SWFRXTX
));
4280 stl_sc26198setreg(portp
, SCCR
, CR_TXSENDXOFF
);
4282 portp
->stats
.rxxoff
++;
4283 stl_sc26198wait(portp
);
4284 stl_sc26198setreg(portp
, MR0
, mr0
);
4286 BRDDISABLE(portp
->brdnr
);
4287 spin_unlock_irqrestore(&brd_lock
, flags
);
4291 /*****************************************************************************/
4293 static void stl_sc26198flush(struct stlport
*portp
)
4295 unsigned long flags
;
4297 pr_debug("stl_sc26198flush(portp=%p)\n", portp
);
4302 spin_lock_irqsave(&brd_lock
, flags
);
4303 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
4304 stl_sc26198setreg(portp
, SCCR
, CR_TXRESET
);
4305 stl_sc26198setreg(portp
, SCCR
, portp
->crenable
);
4306 BRDDISABLE(portp
->brdnr
);
4307 portp
->tx
.tail
= portp
->tx
.head
;
4308 spin_unlock_irqrestore(&brd_lock
, flags
);
4311 /*****************************************************************************/
4314 * Return the current state of data flow on this port. This is only
4315 * really interresting when determining if data has fully completed
4316 * transmission or not... The sc26198 interrupt scheme cannot
4317 * determine when all data has actually drained, so we need to
4318 * check the port statusy register to be sure.
4321 static int stl_sc26198datastate(struct stlport
*portp
)
4323 unsigned long flags
;
4326 pr_debug("stl_sc26198datastate(portp=%p)\n", portp
);
4330 if (test_bit(ASYI_TXBUSY
, &portp
->istate
))
4333 spin_lock_irqsave(&brd_lock
, flags
);
4334 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
4335 sr
= stl_sc26198getreg(portp
, SR
);
4336 BRDDISABLE(portp
->brdnr
);
4337 spin_unlock_irqrestore(&brd_lock
, flags
);
4339 return (sr
& SR_TXEMPTY
) ? 0 : 1;
4342 /*****************************************************************************/
4345 * Delay for a small amount of time, to give the sc26198 a chance
4346 * to process a command...
4349 static void stl_sc26198wait(struct stlport
*portp
)
4353 pr_debug("stl_sc26198wait(portp=%p)\n", portp
);
4358 for (i
= 0; i
< 20; i
++)
4359 stl_sc26198getglobreg(portp
, TSTR
);
4362 /*****************************************************************************/
4365 * If we are TX flow controlled and in IXANY mode then we may
4366 * need to unflow control here. We gotta do this because of the
4367 * automatic flow control modes of the sc26198.
4370 static void stl_sc26198txunflow(struct stlport
*portp
, struct tty_struct
*tty
)
4374 mr0
= stl_sc26198getreg(portp
, MR0
);
4375 stl_sc26198setreg(portp
, MR0
, (mr0
& ~MR0_SWFRXTX
));
4376 stl_sc26198setreg(portp
, SCCR
, CR_HOSTXON
);
4377 stl_sc26198wait(portp
);
4378 stl_sc26198setreg(portp
, MR0
, mr0
);
4379 clear_bit(ASYI_TXFLOWED
, &portp
->istate
);
4382 /*****************************************************************************/
4385 * Interrupt service routine for sc26198 panels.
4388 static void stl_sc26198intr(struct stlpanel
*panelp
, unsigned int iobase
)
4390 struct stlport
*portp
;
4393 spin_lock(&brd_lock
);
4396 * Work around bug in sc26198 chip... Cannot have A6 address
4397 * line of UART high, else iack will be returned as 0.
4399 outb(0, (iobase
+ 1));
4401 iack
= inb(iobase
+ XP_IACK
);
4402 portp
= panelp
->ports
[(iack
& IVR_CHANMASK
) + ((iobase
& 0x4) << 1)];
4404 if (iack
& IVR_RXDATA
)
4405 stl_sc26198rxisr(portp
, iack
);
4406 else if (iack
& IVR_TXDATA
)
4407 stl_sc26198txisr(portp
);
4409 stl_sc26198otherisr(portp
, iack
);
4411 spin_unlock(&brd_lock
);
4414 /*****************************************************************************/
4417 * Transmit interrupt handler. This has gotta be fast! Handling TX
4418 * chars is pretty simple, stuff as many as possible from the TX buffer
4419 * into the sc26198 FIFO.
4420 * In practice it is possible that interrupts are enabled but that the
4421 * port has been hung up. Need to handle not having any TX buffer here,
4422 * this is done by using the side effect that head and tail will also
4423 * be NULL if the buffer has been freed.
4426 static void stl_sc26198txisr(struct stlport
*portp
)
4428 struct tty_struct
*tty
;
4429 unsigned int ioaddr
;
4434 pr_debug("stl_sc26198txisr(portp=%p)\n", portp
);
4436 ioaddr
= portp
->ioaddr
;
4437 head
= portp
->tx
.head
;
4438 tail
= portp
->tx
.tail
;
4439 len
= (head
>= tail
) ? (head
- tail
) : (STL_TXBUFSIZE
- (tail
- head
));
4440 if ((len
== 0) || ((len
< STL_TXBUFLOW
) &&
4441 (test_bit(ASYI_TXLOW
, &portp
->istate
) == 0))) {
4442 set_bit(ASYI_TXLOW
, &portp
->istate
);
4443 tty
= tty_port_tty_get(&portp
->port
);
4451 outb((MR0
| portp
->uartaddr
), (ioaddr
+ XP_ADDR
));
4452 mr0
= inb(ioaddr
+ XP_DATA
);
4453 if ((mr0
& MR0_TXMASK
) == MR0_TXEMPTY
) {
4454 portp
->imr
&= ~IR_TXRDY
;
4455 outb((IMR
| portp
->uartaddr
), (ioaddr
+ XP_ADDR
));
4456 outb(portp
->imr
, (ioaddr
+ XP_DATA
));
4457 clear_bit(ASYI_TXBUSY
, &portp
->istate
);
4459 mr0
|= ((mr0
& ~MR0_TXMASK
) | MR0_TXEMPTY
);
4460 outb(mr0
, (ioaddr
+ XP_DATA
));
4463 len
= min(len
, SC26198_TXFIFOSIZE
);
4464 portp
->stats
.txtotal
+= len
;
4465 stlen
= min_t(unsigned int, len
,
4466 (portp
->tx
.buf
+ STL_TXBUFSIZE
) - tail
);
4467 outb(GTXFIFO
, (ioaddr
+ XP_ADDR
));
4468 outsb((ioaddr
+ XP_DATA
), tail
, stlen
);
4471 if (tail
>= (portp
->tx
.buf
+ STL_TXBUFSIZE
))
4472 tail
= portp
->tx
.buf
;
4474 outsb((ioaddr
+ XP_DATA
), tail
, len
);
4477 portp
->tx
.tail
= tail
;
4481 /*****************************************************************************/
4484 * Receive character interrupt handler. Determine if we have good chars
4485 * or bad chars and then process appropriately. Good chars are easy
4486 * just shove the lot into the RX buffer and set all status byte to 0.
4487 * If a bad RX char then process as required. This routine needs to be
4488 * fast! In practice it is possible that we get an interrupt on a port
4489 * that is closed. This can happen on hangups - since they completely
4490 * shutdown a port not in user context. Need to handle this case.
4493 static void stl_sc26198rxisr(struct stlport
*portp
, unsigned int iack
)
4495 struct tty_struct
*tty
;
4496 unsigned int len
, buflen
, ioaddr
;
4498 pr_debug("stl_sc26198rxisr(portp=%p,iack=%x)\n", portp
, iack
);
4500 tty
= tty_port_tty_get(&portp
->port
);
4501 ioaddr
= portp
->ioaddr
;
4502 outb(GIBCR
, (ioaddr
+ XP_ADDR
));
4503 len
= inb(ioaddr
+ XP_DATA
) + 1;
4505 if ((iack
& IVR_TYPEMASK
) == IVR_RXDATA
) {
4506 if (tty
== NULL
|| (buflen
= tty_buffer_request_room(tty
, len
)) == 0) {
4507 len
= min_t(unsigned int, len
, sizeof(stl_unwanted
));
4508 outb(GRXFIFO
, (ioaddr
+ XP_ADDR
));
4509 insb((ioaddr
+ XP_DATA
), &stl_unwanted
[0], len
);
4510 portp
->stats
.rxlost
+= len
;
4511 portp
->stats
.rxtotal
+= len
;
4513 len
= min(len
, buflen
);
4516 outb(GRXFIFO
, (ioaddr
+ XP_ADDR
));
4517 tty_prepare_flip_string(tty
, &ptr
, len
);
4518 insb((ioaddr
+ XP_DATA
), ptr
, len
);
4519 tty_schedule_flip(tty
);
4520 portp
->stats
.rxtotal
+= len
;
4524 stl_sc26198rxbadchars(portp
);
4528 * If we are TX flow controlled and in IXANY mode then we may need
4529 * to unflow control here. We gotta do this because of the automatic
4530 * flow control modes of the sc26198.
4532 if (test_bit(ASYI_TXFLOWED
, &portp
->istate
)) {
4533 if ((tty
!= NULL
) &&
4534 (tty
->termios
!= NULL
) &&
4535 (tty
->termios
->c_iflag
& IXANY
)) {
4536 stl_sc26198txunflow(portp
, tty
);
4542 /*****************************************************************************/
4545 * Process an RX bad character.
4548 static void stl_sc26198rxbadch(struct stlport
*portp
, unsigned char status
, char ch
)
4550 struct tty_struct
*tty
;
4551 unsigned int ioaddr
;
4553 tty
= tty_port_tty_get(&portp
->port
);
4554 ioaddr
= portp
->ioaddr
;
4556 if (status
& SR_RXPARITY
)
4557 portp
->stats
.rxparity
++;
4558 if (status
& SR_RXFRAMING
)
4559 portp
->stats
.rxframing
++;
4560 if (status
& SR_RXOVERRUN
)
4561 portp
->stats
.rxoverrun
++;
4562 if (status
& SR_RXBREAK
)
4563 portp
->stats
.rxbreaks
++;
4565 if ((tty
!= NULL
) &&
4566 ((portp
->rxignoremsk
& status
) == 0)) {
4567 if (portp
->rxmarkmsk
& status
) {
4568 if (status
& SR_RXBREAK
) {
4570 if (portp
->port
.flags
& ASYNC_SAK
) {
4572 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
4574 } else if (status
& SR_RXPARITY
)
4575 status
= TTY_PARITY
;
4576 else if (status
& SR_RXFRAMING
)
4578 else if(status
& SR_RXOVERRUN
)
4579 status
= TTY_OVERRUN
;
4585 tty_insert_flip_char(tty
, ch
, status
);
4586 tty_schedule_flip(tty
);
4589 portp
->stats
.rxtotal
++;
4594 /*****************************************************************************/
4597 * Process all characters in the RX FIFO of the UART. Check all char
4598 * status bytes as well, and process as required. We need to check
4599 * all bytes in the FIFO, in case some more enter the FIFO while we
4600 * are here. To get the exact character error type we need to switch
4601 * into CHAR error mode (that is why we need to make sure we empty
4605 static void stl_sc26198rxbadchars(struct stlport
*portp
)
4607 unsigned char status
, mr1
;
4611 * To get the precise error type for each character we must switch
4612 * back into CHAR error mode.
4614 mr1
= stl_sc26198getreg(portp
, MR1
);
4615 stl_sc26198setreg(portp
, MR1
, (mr1
& ~MR1_ERRBLOCK
));
4617 while ((status
= stl_sc26198getreg(portp
, SR
)) & SR_RXRDY
) {
4618 stl_sc26198setreg(portp
, SCCR
, CR_CLEARRXERR
);
4619 ch
= stl_sc26198getreg(portp
, RXFIFO
);
4620 stl_sc26198rxbadch(portp
, status
, ch
);
4624 * To get correct interrupt class we must switch back into BLOCK
4627 stl_sc26198setreg(portp
, MR1
, mr1
);
4630 /*****************************************************************************/
4633 * Other interrupt handler. This includes modem signals, flow
4634 * control actions, etc. Most stuff is left to off-level interrupt
4638 static void stl_sc26198otherisr(struct stlport
*portp
, unsigned int iack
)
4640 unsigned char cir
, ipr
, xisr
;
4642 pr_debug("stl_sc26198otherisr(portp=%p,iack=%x)\n", portp
, iack
);
4644 cir
= stl_sc26198getglobreg(portp
, CIR
);
4646 switch (cir
& CIR_SUBTYPEMASK
) {
4648 ipr
= stl_sc26198getreg(portp
, IPR
);
4649 if (ipr
& IPR_DCDCHANGE
) {
4650 stl_cd_change(portp
);
4651 portp
->stats
.modem
++;
4654 case CIR_SUBXONXOFF
:
4655 xisr
= stl_sc26198getreg(portp
, XISR
);
4656 if (xisr
& XISR_RXXONGOT
) {
4657 set_bit(ASYI_TXFLOWED
, &portp
->istate
);
4658 portp
->stats
.txxoff
++;
4660 if (xisr
& XISR_RXXOFFGOT
) {
4661 clear_bit(ASYI_TXFLOWED
, &portp
->istate
);
4662 portp
->stats
.txxon
++;
4666 stl_sc26198setreg(portp
, SCCR
, CR_BREAKRESET
);
4667 stl_sc26198rxbadchars(portp
);
4674 static void stl_free_isabrds(void)
4676 struct stlbrd
*brdp
;
4679 for (i
= 0; i
< stl_nrbrds
; i
++) {
4680 if ((brdp
= stl_brds
[i
]) == NULL
|| (brdp
->state
& STL_PROBED
))
4683 free_irq(brdp
->irq
, brdp
);
4685 stl_cleanup_panels(brdp
);
4687 release_region(brdp
->ioaddr1
, brdp
->iosize1
);
4688 if (brdp
->iosize2
> 0)
4689 release_region(brdp
->ioaddr2
, brdp
->iosize2
);
4697 * Loadable module initialization stuff.
4699 static int __init
stallion_module_init(void)
4701 struct stlbrd
*brdp
;
4702 struct stlconf conf
;
4706 printk(KERN_INFO
"%s: version %s\n", stl_drvtitle
, stl_drvversion
);
4708 spin_lock_init(&stallion_lock
);
4709 spin_lock_init(&brd_lock
);
4711 stl_serial
= alloc_tty_driver(STL_MAXBRDS
* STL_MAXPORTS
);
4717 stl_serial
->owner
= THIS_MODULE
;
4718 stl_serial
->driver_name
= stl_drvname
;
4719 stl_serial
->name
= "ttyE";
4720 stl_serial
->major
= STL_SERIALMAJOR
;
4721 stl_serial
->minor_start
= 0;
4722 stl_serial
->type
= TTY_DRIVER_TYPE_SERIAL
;
4723 stl_serial
->subtype
= SERIAL_TYPE_NORMAL
;
4724 stl_serial
->init_termios
= stl_deftermios
;
4725 stl_serial
->flags
= TTY_DRIVER_REAL_RAW
| TTY_DRIVER_DYNAMIC_DEV
;
4726 tty_set_operations(stl_serial
, &stl_ops
);
4728 retval
= tty_register_driver(stl_serial
);
4730 printk("STALLION: failed to register serial driver\n");
4735 * Find any dynamically supported boards. That is via module load
4738 for (i
= stl_nrbrds
; i
< stl_nargs
; i
++) {
4739 memset(&conf
, 0, sizeof(conf
));
4740 if (stl_parsebrd(&conf
, stl_brdsp
[i
]) == 0)
4742 if ((brdp
= stl_allocbrd()) == NULL
)
4745 brdp
->brdtype
= conf
.brdtype
;
4746 brdp
->ioaddr1
= conf
.ioaddr1
;
4747 brdp
->ioaddr2
= conf
.ioaddr2
;
4748 brdp
->irq
= conf
.irq
;
4749 brdp
->irqtype
= conf
.irqtype
;
4750 stl_brds
[brdp
->brdnr
] = brdp
;
4751 if (stl_brdinit(brdp
)) {
4752 stl_brds
[brdp
->brdnr
] = NULL
;
4755 for (j
= 0; j
< brdp
->nrports
; j
++)
4756 tty_register_device(stl_serial
,
4757 brdp
->brdnr
* STL_MAXPORTS
+ j
, NULL
);
4762 /* this has to be _after_ isa finding because of locking */
4763 retval
= pci_register_driver(&stl_pcidriver
);
4764 if (retval
&& stl_nrbrds
== 0) {
4765 printk(KERN_ERR
"STALLION: can't register pci driver\n");
4770 * Set up a character driver for per board stuff. This is mainly used
4771 * to do stats ioctls on the ports.
4773 if (register_chrdev(STL_SIOMEMMAJOR
, "staliomem", &stl_fsiomem
))
4774 printk("STALLION: failed to register serial board device\n");
4776 stallion_class
= class_create(THIS_MODULE
, "staliomem");
4777 if (IS_ERR(stallion_class
))
4778 printk("STALLION: failed to create class\n");
4779 for (i
= 0; i
< 4; i
++)
4780 device_create_drvdata(stallion_class
, NULL
, MKDEV(STL_SIOMEMMAJOR
, i
),
4781 NULL
, "staliomem%d", i
);
4785 tty_unregister_driver(stl_serial
);
4787 put_tty_driver(stl_serial
);
4792 static void __exit
stallion_module_exit(void)
4794 struct stlbrd
*brdp
;
4797 pr_debug("cleanup_module()\n");
4799 printk(KERN_INFO
"Unloading %s: version %s\n", stl_drvtitle
,
4803 * Free up all allocated resources used by the ports. This includes
4804 * memory and interrupts. As part of this process we will also do
4805 * a hangup on every open port - to try to flush out any processes
4806 * hanging onto ports.
4808 for (i
= 0; i
< stl_nrbrds
; i
++) {
4809 if ((brdp
= stl_brds
[i
]) == NULL
|| (brdp
->state
& STL_PROBED
))
4811 for (j
= 0; j
< brdp
->nrports
; j
++)
4812 tty_unregister_device(stl_serial
,
4813 brdp
->brdnr
* STL_MAXPORTS
+ j
);
4816 for (i
= 0; i
< 4; i
++)
4817 device_destroy(stallion_class
, MKDEV(STL_SIOMEMMAJOR
, i
));
4818 unregister_chrdev(STL_SIOMEMMAJOR
, "staliomem");
4819 class_destroy(stallion_class
);
4821 pci_unregister_driver(&stl_pcidriver
);
4825 tty_unregister_driver(stl_serial
);
4826 put_tty_driver(stl_serial
);
4829 module_init(stallion_module_init
);
4830 module_exit(stallion_module_exit
);
4832 MODULE_AUTHOR("Greg Ungerer");
4833 MODULE_DESCRIPTION("Stallion Multiport Serial Driver");
4834 MODULE_LICENSE("GPL");