2 * $Id: pci.c,v 1.91 1999/01/21 13:34:01 davem Exp $
4 * PCI Bus Services, see include/linux/pci.h for further explanation.
6 * Copyright 1993 -- 1997 Drew Eckhardt, Frederic Potter,
9 * Copyright 1997 -- 2000 Martin Mares <mj@ucw.cz>
12 #include <linux/kernel.h>
13 #include <linux/delay.h>
14 #include <linux/init.h>
15 #include <linux/pci.h>
16 #include <linux/module.h>
17 #include <linux/spinlock.h>
18 #include <asm/dma.h> /* isa_dma_bridge_buggy */
23 * pci_bus_max_busnr - returns maximum PCI bus number of given bus' children
24 * @bus: pointer to PCI bus structure to search
26 * Given a PCI bus, returns the highest PCI bus number present in the set
27 * including the given PCI bus and its list of child PCI buses.
29 unsigned char __devinit
30 pci_bus_max_busnr(struct pci_bus
* bus
)
32 struct list_head
*tmp
;
36 list_for_each(tmp
, &bus
->children
) {
37 n
= pci_bus_max_busnr(pci_bus_b(tmp
));
45 * pci_max_busnr - returns maximum PCI bus number
47 * Returns the highest PCI bus number present in the system global list of
50 unsigned char __devinit
53 struct pci_bus
*bus
= NULL
;
57 while ((bus
= pci_find_next_bus(bus
)) != NULL
) {
58 n
= pci_bus_max_busnr(bus
);
65 static int __pci_bus_find_cap(struct pci_bus
*bus
, unsigned int devfn
, u8 hdr_type
, int cap
)
71 pci_bus_read_config_word(bus
, devfn
, PCI_STATUS
, &status
);
72 if (!(status
& PCI_STATUS_CAP_LIST
))
76 case PCI_HEADER_TYPE_NORMAL
:
77 case PCI_HEADER_TYPE_BRIDGE
:
78 pci_bus_read_config_byte(bus
, devfn
, PCI_CAPABILITY_LIST
, &pos
);
80 case PCI_HEADER_TYPE_CARDBUS
:
81 pci_bus_read_config_byte(bus
, devfn
, PCI_CB_CAPABILITY_LIST
, &pos
);
86 while (ttl
-- && pos
>= 0x40) {
88 pci_bus_read_config_byte(bus
, devfn
, pos
+ PCI_CAP_LIST_ID
, &id
);
93 pci_bus_read_config_byte(bus
, devfn
, pos
+ PCI_CAP_LIST_NEXT
, &pos
);
99 * pci_find_capability - query for devices' capabilities
100 * @dev: PCI device to query
101 * @cap: capability code
103 * Tell if a device supports a given PCI capability.
104 * Returns the address of the requested capability structure within the
105 * device's PCI configuration space or 0 in case the device does not
106 * support it. Possible values for @cap:
108 * %PCI_CAP_ID_PM Power Management
109 * %PCI_CAP_ID_AGP Accelerated Graphics Port
110 * %PCI_CAP_ID_VPD Vital Product Data
111 * %PCI_CAP_ID_SLOTID Slot Identification
112 * %PCI_CAP_ID_MSI Message Signalled Interrupts
113 * %PCI_CAP_ID_CHSWP CompactPCI HotSwap
114 * %PCI_CAP_ID_PCIX PCI-X
115 * %PCI_CAP_ID_EXP PCI Express
117 int pci_find_capability(struct pci_dev
*dev
, int cap
)
119 return __pci_bus_find_cap(dev
->bus
, dev
->devfn
, dev
->hdr_type
, cap
);
123 * pci_bus_find_capability - query for devices' capabilities
124 * @bus: the PCI bus to query
125 * @devfn: PCI device to query
126 * @cap: capability code
128 * Like pci_find_capability() but works for pci devices that do not have a
129 * pci_dev structure set up yet.
131 * Returns the address of the requested capability structure within the
132 * device's PCI configuration space or 0 in case the device does not
135 int pci_bus_find_capability(struct pci_bus
*bus
, unsigned int devfn
, int cap
)
139 pci_bus_read_config_byte(bus
, devfn
, PCI_HEADER_TYPE
, &hdr_type
);
141 return __pci_bus_find_cap(bus
, devfn
, hdr_type
& 0x7f, cap
);
145 * pci_find_ext_capability - Find an extended capability
146 * @dev: PCI device to query
147 * @cap: capability code
149 * Returns the address of the requested extended capability structure
150 * within the device's PCI configuration space or 0 if the device does
151 * not support it. Possible values for @cap:
153 * %PCI_EXT_CAP_ID_ERR Advanced Error Reporting
154 * %PCI_EXT_CAP_ID_VC Virtual Channel
155 * %PCI_EXT_CAP_ID_DSN Device Serial Number
156 * %PCI_EXT_CAP_ID_PWR Power Budgeting
158 int pci_find_ext_capability(struct pci_dev
*dev
, int cap
)
161 int ttl
= 480; /* 3840 bytes, minimum 8 bytes per capability */
164 if (dev
->cfg_size
<= 256)
167 if (pci_read_config_dword(dev
, pos
, &header
) != PCIBIOS_SUCCESSFUL
)
171 * If we have no capabilities, this is indicated by cap ID,
172 * cap version and next pointer all being 0.
178 if (PCI_EXT_CAP_ID(header
) == cap
)
181 pos
= PCI_EXT_CAP_NEXT(header
);
185 if (pci_read_config_dword(dev
, pos
, &header
) != PCIBIOS_SUCCESSFUL
)
193 * pci_find_parent_resource - return resource region of parent bus of given region
194 * @dev: PCI device structure contains resources to be searched
195 * @res: child resource record for which parent is sought
197 * For given resource region of given device, return the resource
198 * region of parent bus the given region is contained in or where
199 * it should be allocated from.
202 pci_find_parent_resource(const struct pci_dev
*dev
, struct resource
*res
)
204 const struct pci_bus
*bus
= dev
->bus
;
206 struct resource
*best
= NULL
;
208 for(i
= 0; i
< PCI_BUS_NUM_RESOURCES
; i
++) {
209 struct resource
*r
= bus
->resource
[i
];
212 if (res
->start
&& !(res
->start
>= r
->start
&& res
->end
<= r
->end
))
213 continue; /* Not contained */
214 if ((res
->flags
^ r
->flags
) & (IORESOURCE_IO
| IORESOURCE_MEM
))
215 continue; /* Wrong type */
216 if (!((res
->flags
^ r
->flags
) & IORESOURCE_PREFETCH
))
217 return r
; /* Exact match */
218 if ((res
->flags
& IORESOURCE_PREFETCH
) && !(r
->flags
& IORESOURCE_PREFETCH
))
219 best
= r
; /* Approximating prefetchable by non-prefetchable */
225 * pci_restore_bars - restore a devices BAR values (e.g. after wake-up)
226 * @dev: PCI device to have its BARs restored
228 * Restore the BAR values for a given device, so as to make it
229 * accessible by its driver.
232 pci_restore_bars(struct pci_dev
*dev
)
236 switch (dev
->hdr_type
) {
237 case PCI_HEADER_TYPE_NORMAL
:
240 case PCI_HEADER_TYPE_BRIDGE
:
243 case PCI_HEADER_TYPE_CARDBUS
:
247 /* Should never get here, but just in case... */
251 for (i
= 0; i
< numres
; i
++)
252 pci_update_resource(dev
, &dev
->resource
[i
], i
);
255 int (*platform_pci_set_power_state
)(struct pci_dev
*dev
, pci_power_t t
);
258 * pci_set_power_state - Set the power state of a PCI device
259 * @dev: PCI device to be suspended
260 * @state: PCI power state (D0, D1, D2, D3hot, D3cold) we're entering
262 * Transition a device to a new power state, using the Power Management
263 * Capabilities in the device's config space.
266 * -EINVAL if trying to enter a lower state than we're already in.
267 * 0 if we're already in the requested state.
268 * -EIO if device does not support PCI PM.
269 * 0 if we can successfully change the power state.
272 pci_set_power_state(struct pci_dev
*dev
, pci_power_t state
)
274 int pm
, need_restore
= 0;
277 /* bound the state we're entering */
278 if (state
> PCI_D3hot
)
281 /* Validate current state:
282 * Can enter D0 from any state, but if we can only go deeper
283 * to sleep if we're already in a low power state
285 if (state
!= PCI_D0
&& dev
->current_state
> state
)
287 else if (dev
->current_state
== state
)
288 return 0; /* we're already there */
290 /* find PCI PM capability in list */
291 pm
= pci_find_capability(dev
, PCI_CAP_ID_PM
);
293 /* abort if the device doesn't support PM capabilities */
297 pci_read_config_word(dev
,pm
+ PCI_PM_PMC
,&pmc
);
298 if ((pmc
& PCI_PM_CAP_VER_MASK
) > 3) {
300 "PCI: %s has unsupported PM cap regs version (%u)\n",
301 pci_name(dev
), pmc
& PCI_PM_CAP_VER_MASK
);
305 /* check if this device supports the desired state */
306 if (state
== PCI_D1
&& !(pmc
& PCI_PM_CAP_D1
))
308 else if (state
== PCI_D2
&& !(pmc
& PCI_PM_CAP_D2
))
311 pci_read_config_word(dev
, pm
+ PCI_PM_CTRL
, &pmcsr
);
313 /* If we're (effectively) in D3, force entire word to 0.
314 * This doesn't affect PME_Status, disables PME_En, and
315 * sets PowerState to 0.
317 switch (dev
->current_state
) {
321 pmcsr
&= ~PCI_PM_CTRL_STATE_MASK
;
324 case PCI_UNKNOWN
: /* Boot-up */
325 if ((pmcsr
& PCI_PM_CTRL_STATE_MASK
) == PCI_D3hot
326 && !(pmcsr
& PCI_PM_CTRL_NO_SOFT_RESET
))
328 /* Fall-through: force to D0 */
334 /* enter specified state */
335 pci_write_config_word(dev
, pm
+ PCI_PM_CTRL
, pmcsr
);
337 /* Mandatory power management transition delays */
338 /* see PCI PM 1.1 5.6.1 table 18 */
339 if (state
== PCI_D3hot
|| dev
->current_state
== PCI_D3hot
)
341 else if (state
== PCI_D2
|| dev
->current_state
== PCI_D2
)
345 * Give firmware a chance to be called, such as ACPI _PRx, _PSx
346 * Firmware method after natice method ?
348 if (platform_pci_set_power_state
)
349 platform_pci_set_power_state(dev
, state
);
351 dev
->current_state
= state
;
353 /* According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT
354 * INTERFACE SPECIFICATION, REV. 1.2", a device transitioning
355 * from D3hot to D0 _may_ perform an internal reset, thereby
356 * going to "D0 Uninitialized" rather than "D0 Initialized".
357 * For example, at least some versions of the 3c905B and the
358 * 3c556B exhibit this behaviour.
360 * At least some laptop BIOSen (e.g. the Thinkpad T21) leave
361 * devices in a D3hot state at boot. Consequently, we need to
362 * restore at least the BARs so that the device will be
363 * accessible to its driver.
366 pci_restore_bars(dev
);
371 int (*platform_pci_choose_state
)(struct pci_dev
*dev
, pm_message_t state
);
374 * pci_choose_state - Choose the power state of a PCI device
375 * @dev: PCI device to be suspended
376 * @state: target sleep state for the whole system. This is the value
377 * that is passed to suspend() function.
379 * Returns PCI power state suitable for given device and given system
383 pci_power_t
pci_choose_state(struct pci_dev
*dev
, pm_message_t state
)
387 if (!pci_find_capability(dev
, PCI_CAP_ID_PM
))
390 if (platform_pci_choose_state
) {
391 ret
= platform_pci_choose_state(dev
, state
);
396 switch (state
.event
) {
399 case PM_EVENT_FREEZE
:
400 case PM_EVENT_SUSPEND
:
403 printk("They asked me for state %d\n", state
.event
);
409 EXPORT_SYMBOL(pci_choose_state
);
412 * pci_save_state - save the PCI configuration space of a device before suspending
413 * @dev: - PCI device that we're dealing with
416 pci_save_state(struct pci_dev
*dev
)
419 /* XXX: 100% dword access ok here? */
420 for (i
= 0; i
< 16; i
++)
421 pci_read_config_dword(dev
, i
* 4,&dev
->saved_config_space
[i
]);
426 * pci_restore_state - Restore the saved state of a PCI device
427 * @dev: - PCI device that we're dealing with
430 pci_restore_state(struct pci_dev
*dev
)
434 for (i
= 0; i
< 16; i
++)
435 pci_write_config_dword(dev
,i
* 4, dev
->saved_config_space
[i
]);
440 * pci_enable_device_bars - Initialize some of a device for use
441 * @dev: PCI device to be initialized
442 * @bars: bitmask of BAR's that must be configured
444 * Initialize device before it's used by a driver. Ask low-level code
445 * to enable selected I/O and memory resources. Wake up the device if it
446 * was suspended. Beware, this function can fail.
450 pci_enable_device_bars(struct pci_dev
*dev
, int bars
)
454 err
= pci_set_power_state(dev
, PCI_D0
);
455 if (err
< 0 && err
!= -EIO
)
457 err
= pcibios_enable_device(dev
, bars
);
464 * pci_enable_device - Initialize device before it's used by a driver.
465 * @dev: PCI device to be initialized
467 * Initialize device before it's used by a driver. Ask low-level code
468 * to enable I/O and memory. Wake up the device if it was suspended.
469 * Beware, this function can fail.
472 pci_enable_device(struct pci_dev
*dev
)
476 if ((err
= pci_enable_device_bars(dev
, (1 << PCI_NUM_RESOURCES
) - 1)))
478 pci_fixup_device(pci_fixup_enable
, dev
);
484 * pcibios_disable_device - disable arch specific PCI resources for device dev
485 * @dev: the PCI device to disable
487 * Disables architecture specific PCI resources for the device. This
488 * is the default implementation. Architecture implementations can
491 void __attribute__ ((weak
)) pcibios_disable_device (struct pci_dev
*dev
) {}
494 * pci_disable_device - Disable PCI device after use
495 * @dev: PCI device to be disabled
497 * Signal to the system that the PCI device is not in use by the system
498 * anymore. This only involves disabling PCI bus-mastering, if active.
501 pci_disable_device(struct pci_dev
*dev
)
505 pci_read_config_word(dev
, PCI_COMMAND
, &pci_command
);
506 if (pci_command
& PCI_COMMAND_MASTER
) {
507 pci_command
&= ~PCI_COMMAND_MASTER
;
508 pci_write_config_word(dev
, PCI_COMMAND
, pci_command
);
510 dev
->is_busmaster
= 0;
512 pcibios_disable_device(dev
);
517 * pci_enable_wake - enable device to generate PME# when suspended
518 * @dev: - PCI device to operate on
519 * @state: - Current state of device.
520 * @enable: - Flag to enable or disable generation
522 * Set the bits in the device's PM Capabilities to generate PME# when
523 * the system is suspended.
525 * -EIO is returned if device doesn't have PM Capabilities.
526 * -EINVAL is returned if device supports it, but can't generate wake events.
527 * 0 if operation is successful.
530 int pci_enable_wake(struct pci_dev
*dev
, pci_power_t state
, int enable
)
535 /* find PCI PM capability in list */
536 pm
= pci_find_capability(dev
, PCI_CAP_ID_PM
);
538 /* If device doesn't support PM Capabilities, but request is to disable
539 * wake events, it's a nop; otherwise fail */
541 return enable
? -EIO
: 0;
543 /* Check device's ability to generate PME# */
544 pci_read_config_word(dev
,pm
+PCI_PM_PMC
,&value
);
546 value
&= PCI_PM_CAP_PME_MASK
;
547 value
>>= ffs(PCI_PM_CAP_PME_MASK
) - 1; /* First bit of mask */
549 /* Check if it can generate PME# from requested state. */
550 if (!value
|| !(value
& (1 << state
)))
551 return enable
? -EINVAL
: 0;
553 pci_read_config_word(dev
, pm
+ PCI_PM_CTRL
, &value
);
555 /* Clear PME_Status by writing 1 to it and enable PME# */
556 value
|= PCI_PM_CTRL_PME_STATUS
| PCI_PM_CTRL_PME_ENABLE
;
559 value
&= ~PCI_PM_CTRL_PME_ENABLE
;
561 pci_write_config_word(dev
, pm
+ PCI_PM_CTRL
, value
);
567 pci_get_interrupt_pin(struct pci_dev
*dev
, struct pci_dev
**bridge
)
571 pci_read_config_byte(dev
, PCI_INTERRUPT_PIN
, &pin
);
575 while (dev
->bus
->self
) {
576 pin
= (pin
+ PCI_SLOT(dev
->devfn
)) % 4;
577 dev
= dev
->bus
->self
;
584 * pci_release_region - Release a PCI bar
585 * @pdev: PCI device whose resources were previously reserved by pci_request_region
586 * @bar: BAR to release
588 * Releases the PCI I/O and memory resources previously reserved by a
589 * successful call to pci_request_region. Call this function only
590 * after all use of the PCI regions has ceased.
592 void pci_release_region(struct pci_dev
*pdev
, int bar
)
594 if (pci_resource_len(pdev
, bar
) == 0)
596 if (pci_resource_flags(pdev
, bar
) & IORESOURCE_IO
)
597 release_region(pci_resource_start(pdev
, bar
),
598 pci_resource_len(pdev
, bar
));
599 else if (pci_resource_flags(pdev
, bar
) & IORESOURCE_MEM
)
600 release_mem_region(pci_resource_start(pdev
, bar
),
601 pci_resource_len(pdev
, bar
));
605 * pci_request_region - Reserved PCI I/O and memory resource
606 * @pdev: PCI device whose resources are to be reserved
607 * @bar: BAR to be reserved
608 * @res_name: Name to be associated with resource.
610 * Mark the PCI region associated with PCI device @pdev BR @bar as
611 * being reserved by owner @res_name. Do not access any
612 * address inside the PCI regions unless this call returns
615 * Returns 0 on success, or %EBUSY on error. A warning
616 * message is also printed on failure.
618 int pci_request_region(struct pci_dev
*pdev
, int bar
, char *res_name
)
620 if (pci_resource_len(pdev
, bar
) == 0)
623 if (pci_resource_flags(pdev
, bar
) & IORESOURCE_IO
) {
624 if (!request_region(pci_resource_start(pdev
, bar
),
625 pci_resource_len(pdev
, bar
), res_name
))
628 else if (pci_resource_flags(pdev
, bar
) & IORESOURCE_MEM
) {
629 if (!request_mem_region(pci_resource_start(pdev
, bar
),
630 pci_resource_len(pdev
, bar
), res_name
))
637 printk (KERN_WARNING
"PCI: Unable to reserve %s region #%d:%lx@%lx for device %s\n",
638 pci_resource_flags(pdev
, bar
) & IORESOURCE_IO
? "I/O" : "mem",
639 bar
+ 1, /* PCI BAR # */
640 pci_resource_len(pdev
, bar
), pci_resource_start(pdev
, bar
),
647 * pci_release_regions - Release reserved PCI I/O and memory resources
648 * @pdev: PCI device whose resources were previously reserved by pci_request_regions
650 * Releases all PCI I/O and memory resources previously reserved by a
651 * successful call to pci_request_regions. Call this function only
652 * after all use of the PCI regions has ceased.
655 void pci_release_regions(struct pci_dev
*pdev
)
659 for (i
= 0; i
< 6; i
++)
660 pci_release_region(pdev
, i
);
664 * pci_request_regions - Reserved PCI I/O and memory resources
665 * @pdev: PCI device whose resources are to be reserved
666 * @res_name: Name to be associated with resource.
668 * Mark all PCI regions associated with PCI device @pdev as
669 * being reserved by owner @res_name. Do not access any
670 * address inside the PCI regions unless this call returns
673 * Returns 0 on success, or %EBUSY on error. A warning
674 * message is also printed on failure.
676 int pci_request_regions(struct pci_dev
*pdev
, char *res_name
)
680 for (i
= 0; i
< 6; i
++)
681 if(pci_request_region(pdev
, i
, res_name
))
687 pci_release_region(pdev
, i
);
693 * pci_set_master - enables bus-mastering for device dev
694 * @dev: the PCI device to enable
696 * Enables bus-mastering on the device and calls pcibios_set_master()
697 * to do the needed arch specific settings.
700 pci_set_master(struct pci_dev
*dev
)
704 pci_read_config_word(dev
, PCI_COMMAND
, &cmd
);
705 if (! (cmd
& PCI_COMMAND_MASTER
)) {
706 pr_debug("PCI: Enabling bus mastering for device %s\n", pci_name(dev
));
707 cmd
|= PCI_COMMAND_MASTER
;
708 pci_write_config_word(dev
, PCI_COMMAND
, cmd
);
710 dev
->is_busmaster
= 1;
711 pcibios_set_master(dev
);
714 #ifndef HAVE_ARCH_PCI_MWI
715 /* This can be overridden by arch code. */
716 u8 pci_cache_line_size
= L1_CACHE_BYTES
>> 2;
719 * pci_generic_prep_mwi - helper function for pci_set_mwi
720 * @dev: the PCI device for which MWI is enabled
722 * Helper function for generic implementation of pcibios_prep_mwi
723 * function. Originally copied from drivers/net/acenic.c.
724 * Copyright 1998-2001 by Jes Sorensen, <jes@trained-monkey.org>.
726 * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
729 pci_generic_prep_mwi(struct pci_dev
*dev
)
733 if (!pci_cache_line_size
)
734 return -EINVAL
; /* The system doesn't support MWI. */
736 /* Validate current setting: the PCI_CACHE_LINE_SIZE must be
737 equal to or multiple of the right value. */
738 pci_read_config_byte(dev
, PCI_CACHE_LINE_SIZE
, &cacheline_size
);
739 if (cacheline_size
>= pci_cache_line_size
&&
740 (cacheline_size
% pci_cache_line_size
) == 0)
743 /* Write the correct value. */
744 pci_write_config_byte(dev
, PCI_CACHE_LINE_SIZE
, pci_cache_line_size
);
746 pci_read_config_byte(dev
, PCI_CACHE_LINE_SIZE
, &cacheline_size
);
747 if (cacheline_size
== pci_cache_line_size
)
750 printk(KERN_DEBUG
"PCI: cache line size of %d is not supported "
751 "by device %s\n", pci_cache_line_size
<< 2, pci_name(dev
));
755 #endif /* !HAVE_ARCH_PCI_MWI */
758 * pci_set_mwi - enables memory-write-invalidate PCI transaction
759 * @dev: the PCI device for which MWI is enabled
761 * Enables the Memory-Write-Invalidate transaction in %PCI_COMMAND,
762 * and then calls @pcibios_set_mwi to do the needed arch specific
763 * operations or a generic mwi-prep function.
765 * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
768 pci_set_mwi(struct pci_dev
*dev
)
773 #ifdef HAVE_ARCH_PCI_MWI
774 rc
= pcibios_prep_mwi(dev
);
776 rc
= pci_generic_prep_mwi(dev
);
782 pci_read_config_word(dev
, PCI_COMMAND
, &cmd
);
783 if (! (cmd
& PCI_COMMAND_INVALIDATE
)) {
784 pr_debug("PCI: Enabling Mem-Wr-Inval for device %s\n", pci_name(dev
));
785 cmd
|= PCI_COMMAND_INVALIDATE
;
786 pci_write_config_word(dev
, PCI_COMMAND
, cmd
);
793 * pci_clear_mwi - disables Memory-Write-Invalidate for device dev
794 * @dev: the PCI device to disable
796 * Disables PCI Memory-Write-Invalidate transaction on the device
799 pci_clear_mwi(struct pci_dev
*dev
)
803 pci_read_config_word(dev
, PCI_COMMAND
, &cmd
);
804 if (cmd
& PCI_COMMAND_INVALIDATE
) {
805 cmd
&= ~PCI_COMMAND_INVALIDATE
;
806 pci_write_config_word(dev
, PCI_COMMAND
, cmd
);
811 * pci_intx - enables/disables PCI INTx for device dev
812 * @pdev: the PCI device to operate on
813 * @enable: boolean: whether to enable or disable PCI INTx
815 * Enables/disables PCI INTx for device dev
818 pci_intx(struct pci_dev
*pdev
, int enable
)
820 u16 pci_command
, new;
822 pci_read_config_word(pdev
, PCI_COMMAND
, &pci_command
);
825 new = pci_command
& ~PCI_COMMAND_INTX_DISABLE
;
827 new = pci_command
| PCI_COMMAND_INTX_DISABLE
;
830 if (new != pci_command
) {
831 pci_write_config_word(pdev
, PCI_COMMAND
, new);
835 #ifndef HAVE_ARCH_PCI_SET_DMA_MASK
837 * These can be overridden by arch-specific implementations
840 pci_set_dma_mask(struct pci_dev
*dev
, u64 mask
)
842 if (!pci_dma_supported(dev
, mask
))
845 dev
->dma_mask
= mask
;
851 pci_set_consistent_dma_mask(struct pci_dev
*dev
, u64 mask
)
853 if (!pci_dma_supported(dev
, mask
))
856 dev
->dev
.coherent_dma_mask
= mask
;
862 static int __devinit
pci_init(void)
864 struct pci_dev
*dev
= NULL
;
866 while ((dev
= pci_get_device(PCI_ANY_ID
, PCI_ANY_ID
, dev
)) != NULL
) {
867 pci_fixup_device(pci_fixup_final
, dev
);
872 static int __devinit
pci_setup(char *str
)
875 char *k
= strchr(str
, ',');
878 if (*str
&& (str
= pcibios_setup(str
)) && *str
) {
879 /* PCI layer options should be handled here */
880 printk(KERN_ERR
"PCI: Unknown option `%s'\n", str
);
887 device_initcall(pci_init
);
889 __setup("pci=", pci_setup
);
891 #if defined(CONFIG_ISA) || defined(CONFIG_EISA)
892 /* FIXME: Some boxes have multiple ISA bridges! */
893 struct pci_dev
*isa_bridge
;
894 EXPORT_SYMBOL(isa_bridge
);
897 EXPORT_SYMBOL_GPL(pci_restore_bars
);
898 EXPORT_SYMBOL(pci_enable_device_bars
);
899 EXPORT_SYMBOL(pci_enable_device
);
900 EXPORT_SYMBOL(pci_disable_device
);
901 EXPORT_SYMBOL(pci_max_busnr
);
902 EXPORT_SYMBOL(pci_bus_max_busnr
);
903 EXPORT_SYMBOL(pci_find_capability
);
904 EXPORT_SYMBOL(pci_bus_find_capability
);
905 EXPORT_SYMBOL(pci_release_regions
);
906 EXPORT_SYMBOL(pci_request_regions
);
907 EXPORT_SYMBOL(pci_release_region
);
908 EXPORT_SYMBOL(pci_request_region
);
909 EXPORT_SYMBOL(pci_set_master
);
910 EXPORT_SYMBOL(pci_set_mwi
);
911 EXPORT_SYMBOL(pci_clear_mwi
);
912 EXPORT_SYMBOL_GPL(pci_intx
);
913 EXPORT_SYMBOL(pci_set_dma_mask
);
914 EXPORT_SYMBOL(pci_set_consistent_dma_mask
);
915 EXPORT_SYMBOL(pci_assign_resource
);
916 EXPORT_SYMBOL(pci_find_parent_resource
);
918 EXPORT_SYMBOL(pci_set_power_state
);
919 EXPORT_SYMBOL(pci_save_state
);
920 EXPORT_SYMBOL(pci_restore_state
);
921 EXPORT_SYMBOL(pci_enable_wake
);
925 EXPORT_SYMBOL(isa_dma_bridge_buggy
);
926 EXPORT_SYMBOL(pci_pci_problems
);