Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzi...

[linux-2.6/sactl.git] / Documentation / scsi / scsi_eh.txt

SCSI EH
======================================

 This document describes SCSI midlayer error handling infrastructure.
Please refer to Documentation/scsi/scsi_mid_low_api.txt for more
information regarding SCSI midlayer.

TABLE OF CONTENTS

[1] How SCSI commands travel through the midlayer and to EH
    [1-1] struct scsi_cmnd
    [1-2] How do scmd's get completed?
        [1-2-1] Completing a scmd w/ scsi_done
        [1-2-2] Completing a scmd w/ timeout
    [1-3] How EH takes over
[2] How SCSI EH works
    [2-1] EH through fine-grained callbacks
        [2-1-1] Overview
        [2-1-2] Flow of scmds through EH
        [2-1-3] Flow of control
    [2-2] EH through transportt->eh_strategy_handler()
        [2-2-1] Pre transportt->eh_strategy_handler() SCSI midlayer conditions
        [2-2-2] Post transportt->eh_strategy_handler() SCSI midlayer conditions
        [2-2-3] Things to consider


[1] How SCSI commands travel through the midlayer and to EH

[1-1] struct scsi_cmnd

 Each SCSI command is represented with struct scsi_cmnd (== scmd).  A
scmd has two list_head's to link itself into lists.  The two are
scmd->list and scmd->eh_entry.  The former is used for free list or
per-device allocated scmd list and not of much interest to this EH
discussion.  The latter is used for completion and EH lists and unless
otherwise stated scmds are always linked using scmd->eh_entry in this
discussion.


[1-2] How do scmd's get completed?

 Once LLDD gets hold of a scmd, either the LLDD will complete the
command by calling scsi_done callback passed from midlayer when
invoking hostt->queuecommand() or SCSI midlayer will time it out.


[1-2-1] Completing a scmd w/ scsi_done

 For all non-EH commands, scsi_done() is the completion callback.  It
does the following.

 1. Delete timeout timer.  If it fails, it means that timeout timer
    has expired and is going to finish the command.  Just return.

 2. Link scmd to per-cpu scsi_done_q using scmd->en_entry

 3. Raise SCSI_SOFTIRQ

 SCSI_SOFTIRQ handler scsi_softirq calls scsi_decide_disposition() to
determine what to do with the command.  scsi_decide_disposition()
looks at the scmd->result value and sense data to determine what to do
with the command.

 - SUCCESS
        scsi_finish_command() is invoked for the command.  The
        function does some maintenance choirs and notify completion by
        calling scmd->done() callback, which, for fs requests, would
        be HLD completion callback - sd:sd_rw_intr, sr:rw_intr,
        st:st_intr.

 - NEEDS_RETRY
 - ADD_TO_MLQUEUE
        scmd is requeued to blk queue.

 - otherwise
        scsi_eh_scmd_add(scmd, 0) is invoked for the command.  See
        [1-3] for details of this function.


[1-2-2] Completing a scmd w/ timeout

 The timeout handler is scsi_times_out().  When a timeout occurs, this
function

 1. invokes optional hostt->eh_timed_out() callback.  Return value can
    be one of

    - EH_HANDLED
        This indicates that eh_timed_out() dealt with the timeout.  The
        scmd is passed to __scsi_done() and thus linked into per-cpu
        scsi_done_q.  Normal command completion described in [1-2-1]
        follows.

    - EH_RESET_TIMER
        This indicates that more time is required to finish the
        command.  Timer is restarted.  This action is counted as a
        retry and only allowed scmd->allowed + 1(!) times.  Once the
        limit is reached, action for EH_NOT_HANDLED is taken instead.

        *NOTE* This action is racy as the LLDD could finish the scmd
        after the timeout has expired but before it's added back.  In
        such cases, scsi_done() would think that timeout has occurred
        and return without doing anything.  We lose completion and the
        command will time out again.

    - EH_NOT_HANDLED
        This is the same as when eh_timed_out() callback doesn't exist.
        Step #2 is taken.

 2. scsi_eh_scmd_add(scmd, SCSI_EH_CANCEL_CMD) is invoked for the
    command.  See [1-3] for more information.


[1-3] How EH takes over

 scmds enter EH via scsi_eh_scmd_add(), which does the following.

 1. Turns on scmd->eh_eflags as requested.  It's 0 for error
    completions and SCSI_EH_CANCEL_CMD for timeouts.

 2. Links scmd->eh_entry to shost->eh_cmd_q

 3. Sets SHOST_RECOVERY bit in shost->shost_state

 4. Increments shost->host_failed

 5. Wakes up SCSI EH thread if shost->host_busy == shost->host_failed

 As can be seen above, once any scmd is added to shost->eh_cmd_q,
SHOST_RECOVERY shost_state bit is turned on.  This prevents any new
scmd to be issued from blk queue to the host; eventually, all scmds on
the host either complete normally, fail and get added to eh_cmd_q, or
time out and get added to shost->eh_cmd_q.

 If all scmds either complete or fail, the number of in-flight scmds
becomes equal to the number of failed scmds - i.e. shost->host_busy ==
shost->host_failed.  This wakes up SCSI EH thread.  So, once woken up,
SCSI EH thread can expect that all in-flight commands have failed and
are linked on shost->eh_cmd_q.

 Note that this does not mean lower layers are quiescent.  If a LLDD
completed a scmd with error status, the LLDD and lower layers are
assumed to forget about the scmd at that point.  However, if a scmd
has timed out, unless hostt->eh_timed_out() made lower layers forget
about the scmd, which currently no LLDD does, the command is still
active as long as lower layers are concerned and completion could
occur at any time.  Of course, all such completions are ignored as the
timer has already expired.

 We'll talk about how SCSI EH takes actions to abort - make LLDD
forget about - timed out scmds later.


[2] How SCSI EH works

 LLDD's can implement SCSI EH actions in one of the following two
ways.

 - Fine-grained EH callbacks
        LLDD can implement fine-grained EH callbacks and let SCSI
        midlayer drive error handling and call appropriate callbacks.
        This will be discussed further in [2-1].

 - eh_strategy_handler() callback
        This is one big callback which should perform whole error
        handling.  As such, it should do all choirs SCSI midlayer
        performs during recovery.  This will be discussed in [2-2].

 Once recovery is complete, SCSI EH resumes normal operation by
calling scsi_restart_operations(), which

 1. Checks if door locking is needed and locks door.

 2. Clears SHOST_RECOVERY shost_state bit

 3. Wakes up waiters on shost->host_wait.  This occurs if someone
    calls scsi_block_when_processing_errors() on the host.
    (*QUESTION* why is it needed?  All operations will be blocked
    anyway after it reaches blk queue.)

 4. Kicks queues in all devices on the host in the asses


[2-1] EH through fine-grained callbacks

[2-1-1] Overview

 If eh_strategy_handler() is not present, SCSI midlayer takes charge
of driving error handling.  EH's goals are two - make LLDD, host and
device forget about timed out scmds and make them ready for new
commands.  A scmd is said to be recovered if the scmd is forgotten by
lower layers and lower layers are ready to process or fail the scmd
again.

 To achieve these goals, EH performs recovery actions with increasing
severity.  Some actions are performed by issuing SCSI commands and
others are performed by invoking one of the following fine-grained
hostt EH callbacks.  Callbacks may be omitted and omitted ones are
considered to fail always.

int (* eh_abort_handler)(struct scsi_cmnd *);
int (* eh_device_reset_handler)(struct scsi_cmnd *);
int (* eh_bus_reset_handler)(struct scsi_cmnd *);
int (* eh_host_reset_handler)(struct scsi_cmnd *);

 Higher-severity actions are taken only when lower-severity actions
cannot recover some of failed scmds.  Also, note that failure of the
highest-severity action means EH failure and results in offlining of
all unrecovered devices.

 During recovery, the following rules are followed

 - Recovery actions are performed on failed scmds on the to do list,
   eh_work_q.  If a recovery action succeeds for a scmd, recovered
   scmds are removed from eh_work_q.

   Note that single recovery action on a scmd can recover multiple
   scmds.  e.g. resetting a device recovers all failed scmds on the
   device.

 - Higher severity actions are taken iff eh_work_q is not empty after
   lower severity actions are complete.

 - EH reuses failed scmds to issue commands for recovery.  For
   timed-out scmds, SCSI EH ensures that LLDD forgets about a scmd
   before reusing it for EH commands.

 When a scmd is recovered, the scmd is moved from eh_work_q to EH
local eh_done_q using scsi_eh_finish_cmd().  After all scmds are
recovered (eh_work_q is empty), scsi_eh_flush_done_q() is invoked to
either retry or error-finish (notify upper layer of failure) recovered
scmds.

 scmds are retried iff its sdev is still online (not offlined during
EH), REQ_FAILFAST is not set and ++scmd->retries is less than
scmd->allowed.


[2-1-2] Flow of scmds through EH

 1. Error completion / time out
    ACTION: scsi_eh_scmd_add() is invoked for scmd
        - set scmd->eh_eflags
        - add scmd to shost->eh_cmd_q
        - set SHOST_RECOVERY
        - shost->host_failed++
    LOCKING: shost->host_lock

 2. EH starts
    ACTION: move all scmds to EH's local eh_work_q.  shost->eh_cmd_q
            is cleared.
    LOCKING: shost->host_lock (not strictly necessary, just for
             consistency)

 3. scmd recovered
    ACTION: scsi_eh_finish_cmd() is invoked to EH-finish scmd
        - shost->host_failed--
        - clear scmd->eh_eflags
        - scsi_setup_cmd_retry()
        - move from local eh_work_q to local eh_done_q
    LOCKING: none

 4. EH completes
    ACTION: scsi_eh_flush_done_q() retries scmds or notifies upper
            layer of failure.
        - scmd is removed from eh_done_q and scmd->eh_entry is cleared
        - if retry is necessary, scmd is requeued using
          scsi_queue_insert()
        - otherwise, scsi_finish_command() is invoked for scmd
    LOCKING: queue or finish function performs appropriate locking


[2-1-3] Flow of control

 EH through fine-grained callbacks start from scsi_unjam_host().

<<scsi_unjam_host>>

    1. Lock shost->host_lock, splice_init shost->eh_cmd_q into local
       eh_work_q and unlock host_lock.  Note that shost->eh_cmd_q is
       cleared by this action.

    2. Invoke scsi_eh_get_sense.

    <<scsi_eh_get_sense>>

        This action is taken for each error-completed
        (!SCSI_EH_CANCEL_CMD) commands without valid sense data.  Most
        SCSI transports/LLDDs automatically acquire sense data on
        command failures (autosense).  Autosense is recommended for
        performance reasons and as sense information could get out of
        sync inbetween occurrence of CHECK CONDITION and this action.

        Note that if autosense is not supported, scmd->sense_buffer
        contains invalid sense data when error-completing the scmd
        with scsi_done().  scsi_decide_disposition() always returns
        FAILED in such cases thus invoking SCSI EH.  When the scmd
        reaches here, sense data is acquired and
        scsi_decide_disposition() is called again.

        1. Invoke scsi_request_sense() which issues REQUEST_SENSE
           command.  If fails, no action.  Note that taking no action
           causes higher-severity recovery to be taken for the scmd.

        2. Invoke scsi_decide_disposition() on the scmd

           - SUCCESS
                scmd->retries is set to scmd->allowed preventing
                scsi_eh_flush_done_q() from retrying the scmd and
                scsi_eh_finish_cmd() is invoked.

           - NEEDS_RETRY
                scsi_eh_finish_cmd() invoked

           - otherwise
                No action.

    3. If !list_empty(&eh_work_q), invoke scsi_eh_abort_cmds().

    <<scsi_eh_abort_cmds>>

        This action is taken for each timed out command.
        hostt->eh_abort_handler() is invoked for each scmd.  The
        handler returns SUCCESS if it has succeeded to make LLDD and
        all related hardware forget about the scmd.

        If a timedout scmd is successfully aborted and the sdev is
        either offline or ready, scsi_eh_finish_cmd() is invoked for
        the scmd.  Otherwise, the scmd is left in eh_work_q for
        higher-severity actions.

        Note that both offline and ready status mean that the sdev is
        ready to process new scmds, where processing also implies
        immediate failing; thus, if a sdev is in one of the two
        states, no further recovery action is needed.

        Device readiness is tested using scsi_eh_tur() which issues
        TEST_UNIT_READY command.  Note that the scmd must have been
        aborted successfully before reusing it for TEST_UNIT_READY.

    4. If !list_empty(&eh_work_q), invoke scsi_eh_ready_devs()

    <<scsi_eh_ready_devs>>

        This function takes four increasingly more severe measures to
        make failed sdevs ready for new commands.

        1. Invoke scsi_eh_stu()

        <<scsi_eh_stu>>

            For each sdev which has failed scmds with valid sense data
            of which scsi_check_sense()'s verdict is FAILED,
            START_STOP_UNIT command is issued w/ start=1.  Note that
            as we explicitly choose error-completed scmds, it is known
            that lower layers have forgotten about the scmd and we can
            reuse it for STU.

            If STU succeeds and the sdev is either offline or ready,
            all failed scmds on the sdev are EH-finished with
            scsi_eh_finish_cmd().

            *NOTE* If hostt->eh_abort_handler() isn't implemented or
            failed, we may still have timed out scmds at this point
            and STU doesn't make lower layers forget about those
            scmds.  Yet, this function EH-finish all scmds on the sdev
            if STU succeeds leaving lower layers in an inconsistent
            state.  It seems that STU action should be taken only when
            a sdev has no timed out scmd.

        2. If !list_empty(&eh_work_q), invoke scsi_eh_bus_device_reset().

        <<scsi_eh_bus_device_reset>>

            This action is very similar to scsi_eh_stu() except that,
            instead of issuing STU, hostt->eh_device_reset_handler()
            is used.  Also, as we're not issuing SCSI commands and
            resetting clears all scmds on the sdev, there is no need
            to choose error-completed scmds.

        3. If !list_empty(&eh_work_q), invoke scsi_eh_bus_reset()

        <<scsi_eh_bus_reset>>

            hostt->eh_bus_reset_handler() is invoked for each channel
            with failed scmds.  If bus reset succeeds, all failed
            scmds on all ready or offline sdevs on the channel are
            EH-finished.

        4. If !list_empty(&eh_work_q), invoke scsi_eh_host_reset()

        <<scsi_eh_host_reset>>

            This is the last resort.  hostt->eh_host_reset_handler()
            is invoked.  If host reset succeeds, all failed scmds on
            all ready or offline sdevs on the host are EH-finished.

        5. If !list_empty(&eh_work_q), invoke scsi_eh_offline_sdevs()

        <<scsi_eh_offline_sdevs>>

            Take all sdevs which still have unrecovered scmds offline
            and EH-finish the scmds.

    5. Invoke scsi_eh_flush_done_q().

        <<scsi_eh_flush_done_q>>

            At this point all scmds are recovered (or given up) and
            put on eh_done_q by scsi_eh_finish_cmd().  This function
            flushes eh_done_q by either retrying or notifying upper
            layer of failure of the scmds.


[2-2] EH through transportt->eh_strategy_handler()

 transportt->eh_strategy_handler() is invoked in the place of
scsi_unjam_host() and it is responsible for whole recovery process.
On completion, the handler should have made lower layers forget about
all failed scmds and either ready for new commands or offline.  Also,
it should perform SCSI EH maintenance choirs to maintain integrity of
SCSI midlayer.  IOW, of the steps described in [2-1-2], all steps
except for #1 must be implemented by eh_strategy_handler().


[2-2-1] Pre transportt->eh_strategy_handler() SCSI midlayer conditions

 The following conditions are true on entry to the handler.

 - Each failed scmd's eh_flags field is set appropriately.

 - Each failed scmd is linked on scmd->eh_cmd_q by scmd->eh_entry.

 - SHOST_RECOVERY is set.

 - shost->host_failed == shost->host_busy


[2-2-2] Post transportt->eh_strategy_handler() SCSI midlayer conditions

 The following conditions must be true on exit from the handler.

 - shost->host_failed is zero.

 - Each scmd's eh_eflags field is cleared.

 - Each scmd is in such a state that scsi_setup_cmd_retry() on the
   scmd doesn't make any difference.

 - shost->eh_cmd_q is cleared.

 - Each scmd->eh_entry is cleared.

 - Either scsi_queue_insert() or scsi_finish_command() is called on
   each scmd.  Note that the handler is free to use scmd->retries and
   ->allowed to limit the number of retries.


[2-2-3] Things to consider

 - Know that timed out scmds are still active on lower layers.  Make
   lower layers forget about them before doing anything else with
   those scmds.

 - For consistency, when accessing/modifying shost data structure,
   grab shost->host_lock.

 - On completion, each failed sdev must have forgotten about all
   active scmds.

 - On completion, each failed sdev must be ready for new commands or
   offline.


--
Tejun Heo
htejun@gmail.com
11th September 2005