Linux 2.6.25
[linux-2.6/s3c2410-cpufreq.git] / include / asm-arm / arch-pnx4008 / irqs.h
blob13ec7ed0f501a00e222089efe07a6e9ccd2fbebb
1 /*
2 * include/asm-arm/arch-pnx4008/irqs.h
4 * PNX4008 IRQ controller driver - header file
6 * Author: Dmitry Chigirev <source@mvista.com>
8 * 2005 (c) MontaVista Software, Inc. This file is licensed under
9 * the terms of the GNU General Public License version 2. This program
10 * is licensed "as is" without any warranty of any kind, whether express
11 * or implied.
13 #ifndef __PNX4008_IRQS_h__
14 #define __PNX4008_IRQS_h__
16 #define NR_IRQS 96
18 /*Manual: table 259, page 199*/
20 /*SUB2 Interrupt Routing (SIC2)*/
22 #define SIC2_BASE_INT 64
24 #define CLK_SWITCH_ARM_INT 95 /*manual: Clkswitch ARM */
25 #define CLK_SWITCH_DSP_INT 94 /*manual: ClkSwitch DSP */
26 #define CLK_SWITCH_AUD_INT 93 /*manual: Clkswitch AUD */
27 #define GPI_06_INT 92
28 #define GPI_05_INT 91
29 #define GPI_04_INT 90
30 #define GPI_03_INT 89
31 #define GPI_02_INT 88
32 #define GPI_01_INT 87
33 #define GPI_00_INT 86
34 #define BT_CLKREQ_INT 85
35 #define SPI1_DATIN_INT 84
36 #define U5_RX_INT 83
37 #define SDIO_INT_N 82
38 #define CAM_HS_INT 81
39 #define CAM_VS_INT 80
40 #define GPI_07_INT 79
41 #define DISP_SYNC_INT 78
42 #define DSP_INT8 77
43 #define U7_HCTS_INT 76
44 #define GPI_10_INT 75
45 #define GPI_09_INT 74
46 #define GPI_08_INT 73
47 #define DSP_INT7 72
48 #define U2_HCTS_INT 71
49 #define SPI2_DATIN_INT 70
50 #define GPIO_05_INT 69
51 #define GPIO_04_INT 68
52 #define GPIO_03_INT 67
53 #define GPIO_02_INT 66
54 #define GPIO_01_INT 65
55 #define GPIO_00_INT 64
57 /*Manual: table 258, page 198*/
59 /*SUB1 Interrupt Routing (SIC1)*/
61 #define SIC1_BASE_INT 32
63 #define USB_I2C_INT 63
64 #define USB_DEV_HP_INT 62
65 #define USB_DEV_LP_INT 61
66 #define USB_DEV_DMA_INT 60
67 #define USB_HOST_INT 59
68 #define USB_OTG_ATX_INT_N 58
69 #define USB_OTG_TIMER_INT 57
70 #define SW_INT 56
71 #define SPI1_INT 55
72 #define KEY_IRQ 54
73 #define DSP_M_INT 53
74 #define RTC_INT 52
75 #define I2C_1_INT 51
76 #define I2C_2_INT 50
77 #define PLL1_LOCK_INT 49
78 #define PLL2_LOCK_INT 48
79 #define PLL3_LOCK_INT 47
80 #define PLL4_LOCK_INT 46
81 #define PLL5_LOCK_INT 45
82 #define SPI2_INT 44
83 #define DSP_INT1 43
84 #define DSP_INT2 42
85 #define DSP_TDM_INT2 41
86 #define TS_AUX_INT 40
87 #define TS_IRQ 39
88 #define TS_P_INT 38
89 #define UOUT1_TO_PAD_INT 37
90 #define GPI_11_INT 36
91 #define DSP_INT4 35
92 #define JTAG_COMM_RX_INT 34
93 #define JTAG_COMM_TX_INT 33
94 #define DSP_INT3 32
96 /*Manual: table 257, page 197*/
98 /*MAIN Interrupt Routing*/
100 #define MAIN_BASE_INT 0
102 #define SUB2_FIQ_N 31 /*active low */
103 #define SUB1_FIQ_N 30 /*active low */
104 #define JPEG_INT 29
105 #define DMA_INT 28
106 #define MSTIMER_INT 27
107 #define IIR1_INT 26
108 #define IIR2_INT 25
109 #define IIR7_INT 24
110 #define DSP_TDM_INT0 23
111 #define DSP_TDM_INT1 22
112 #define DSP_P_INT 21
113 #define DSP_INT0 20
114 #define DUM_INT 19
115 #define UOUT0_TO_PAD_INT 18
116 #define MP4_ENC_INT 17
117 #define MP4_DEC_INT 16
118 #define SD0_INT 15
119 #define MBX_INT 14
120 #define SD1_INT 13
121 #define MS_INT_N 12
122 #define FLASH_INT 11 /*NAND*/
123 #define IIR6_INT 10
124 #define IIR5_INT 9
125 #define IIR4_INT 8
126 #define IIR3_INT 7
127 #define WATCH_INT 6
128 #define HSTIMER_INT 5
129 #define ARCH_TIMER_IRQ HSTIMER_INT
130 #define CAM_INT 4
131 #define PRNG_INT 3
132 #define CRYPTO_INT 2
133 #define SUB2_IRQ_N 1 /*active low */
134 #define SUB1_IRQ_N 0 /*active low */
136 #define PNX4008_IRQ_TYPES \
137 { /*IRQ #'s: */ \
138 IRQT_LOW, IRQT_LOW, IRQT_LOW, IRQT_HIGH, /* 0, 1, 2, 3 */ \
139 IRQT_LOW, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 4, 5, 6, 7 */ \
140 IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 8, 9,10,11 */ \
141 IRQT_LOW, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 12,13,14,15 */ \
142 IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 16,17,18,19 */ \
143 IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 20,21,22,23 */ \
144 IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 24,25,26,27 */ \
145 IRQT_HIGH, IRQT_HIGH, IRQT_LOW, IRQT_LOW, /* 28,29,30,31 */ \
146 IRQT_HIGH, IRQT_LOW, IRQT_HIGH, IRQT_HIGH, /* 32,33,34,35 */ \
147 IRQT_HIGH, IRQT_HIGH, IRQT_FALLING, IRQT_HIGH, /* 36,37,38,39 */ \
148 IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 40,41,42,43 */ \
149 IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 44,45,46,47 */ \
150 IRQT_HIGH, IRQT_HIGH, IRQT_LOW, IRQT_LOW, /* 48,49,50,51 */ \
151 IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 52,53,54,55 */ \
152 IRQT_HIGH, IRQT_HIGH, IRQT_LOW, IRQT_HIGH, /* 56,57,58,59 */ \
153 IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 60,61,62,63 */ \
154 IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 64,65,66,67 */ \
155 IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 68,69,70,71 */ \
156 IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 72,73,74,75 */ \
157 IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 76,77,78,79 */ \
158 IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 80,81,82,83 */ \
159 IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 84,85,86,87 */ \
160 IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 88,89,90,91 */ \
161 IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 92,93,94,95 */ \
164 /* Start Enable Pin Interrupts - table 58 page 66 */
166 #define SE_PIN_BASE_INT 32
168 #define SE_U7_RX_INT 63
169 #define SE_U7_HCTS_INT 62
170 #define SE_BT_CLKREQ_INT 61
171 #define SE_U6_IRRX_INT 60
172 /*59 unused*/
173 #define SE_U5_RX_INT 58
174 #define SE_GPI_11_INT 57
175 #define SE_U3_RX_INT 56
176 #define SE_U2_HCTS_INT 55
177 #define SE_U2_RX_INT 54
178 #define SE_U1_RX_INT 53
179 #define SE_DISP_SYNC_INT 52
180 /*51 unused*/
181 #define SE_SDIO_INT_N 50
182 #define SE_MSDIO_START_INT 49
183 #define SE_GPI_06_INT 48
184 #define SE_GPI_05_INT 47
185 #define SE_GPI_04_INT 46
186 #define SE_GPI_03_INT 45
187 #define SE_GPI_02_INT 44
188 #define SE_GPI_01_INT 43
189 #define SE_GPI_00_INT 42
190 #define SE_SYSCLKEN_PIN_INT 41
191 #define SE_SPI1_DATAIN_INT 40
192 #define SE_GPI_07_INT 39
193 #define SE_SPI2_DATAIN_INT 38
194 #define SE_GPI_10_INT 37
195 #define SE_GPI_09_INT 36
196 #define SE_GPI_08_INT 35
197 /*34-32 unused*/
199 /* Start Enable Internal Interrupts - table 57 page 65 */
201 #define SE_INT_BASE_INT 0
203 #define SE_TS_IRQ 31
204 #define SE_TS_P_INT 30
205 #define SE_TS_AUX_INT 29
206 /*27-28 unused*/
207 #define SE_USB_AHB_NEED_CLK_INT 26
208 #define SE_MSTIMER_INT 25
209 #define SE_RTC_INT 24
210 #define SE_USB_NEED_CLK_INT 23
211 #define SE_USB_INT 22
212 #define SE_USB_I2C_INT 21
213 #define SE_USB_OTG_TIMER_INT 20
215 #endif /* __PNX4008_IRQS_h__ */