2 * Amiga Buddha, Catweasel and X-Surf IDE Driver
4 * Copyright (C) 1997, 2001 by Geert Uytterhoeven and others
6 * This driver was written based on the specifications in README.buddha and
7 * the X-Surf info from Inside_XSurf.txt available at
8 * http://www.jschoenfeld.com
10 * This file is subject to the terms and conditions of the GNU General Public
11 * License. See the file COPYING in the main directory of this archive for
16 * - tune the timings using the speed-register
19 #include <linux/types.h>
21 #include <linux/interrupt.h>
22 #include <linux/blkdev.h>
23 #include <linux/hdreg.h>
24 #include <linux/zorro.h>
25 #include <linux/ide.h>
26 #include <linux/init.h>
28 #include <asm/amigahw.h>
29 #include <asm/amigaints.h>
33 * The Buddha has 2 IDE interfaces, the Catweasel has 3, X-Surf has 2
36 #define BUDDHA_NUM_HWIFS 2
37 #define CATWEASEL_NUM_HWIFS 3
38 #define XSURF_NUM_HWIFS 2
41 * Bases of the IDE interfaces (relative to the board address)
44 #define BUDDHA_BASE1 0x800
45 #define BUDDHA_BASE2 0xa00
46 #define BUDDHA_BASE3 0xc00
48 #define XSURF_BASE1 0xb000 /* 2.5" Interface */
49 #define XSURF_BASE2 0xd000 /* 3.5" Interface */
51 static u_int buddha_bases
[CATWEASEL_NUM_HWIFS
] __initdata
= {
52 BUDDHA_BASE1
, BUDDHA_BASE2
, BUDDHA_BASE3
55 static u_int xsurf_bases
[XSURF_NUM_HWIFS
] __initdata
= {
56 XSURF_BASE1
, XSURF_BASE2
60 * Offsets from one of the above bases
63 #define BUDDHA_CONTROL 0x11a
69 #define BUDDHA_IRQ1 0xf00 /* MSB = 1, Harddisk is source of */
70 #define BUDDHA_IRQ2 0xf40 /* interrupt */
71 #define BUDDHA_IRQ3 0xf80
73 #define XSURF_IRQ1 0x7e
74 #define XSURF_IRQ2 0x7e
76 static int buddha_irqports
[CATWEASEL_NUM_HWIFS
] __initdata
= {
77 BUDDHA_IRQ1
, BUDDHA_IRQ2
, BUDDHA_IRQ3
80 static int xsurf_irqports
[XSURF_NUM_HWIFS
] __initdata
= {
81 XSURF_IRQ1
, XSURF_IRQ2
84 #define BUDDHA_IRQ_MR 0xfc0 /* master interrupt enable */
91 typedef enum BuddhaType_Enum
{
92 BOARD_BUDDHA
, BOARD_CATWEASEL
, BOARD_XSURF
95 static const char *buddha_board_name
[] = { "Buddha", "Catweasel", "X-Surf" };
98 * Check and acknowledge the interrupt status
101 static int buddha_ack_intr(ide_hwif_t
*hwif
)
105 ch
= z_readb(hwif
->io_ports
[IDE_IRQ_OFFSET
]);
111 static int xsurf_ack_intr(ide_hwif_t
*hwif
)
115 ch
= z_readb(hwif
->io_ports
[IDE_IRQ_OFFSET
]);
116 /* X-Surf needs a 0 written to IRQ register to ensure ISA bit A11 stays at 0 */
117 z_writeb(0, hwif
->io_ports
[IDE_IRQ_OFFSET
]);
123 static void __init
buddha_setup_ports(hw_regs_t
*hw
, unsigned long base
,
124 unsigned long ctl
, unsigned long irq_port
,
125 ide_ack_intr_t
*ack_intr
)
129 memset(hw
, 0, sizeof(*hw
));
131 hw
->io_ports
[IDE_DATA_OFFSET
] = base
;
133 for (i
= 1; i
< 8; i
++)
134 hw
->io_ports
[i
] = base
+ 2 + i
* 4;
136 hw
->io_ports
[IDE_CONTROL_OFFSET
] = ctl
;
137 hw
->io_ports
[IDE_IRQ_OFFSET
] = irq_port
;
139 hw
->irq
= IRQ_AMIGA_PORTS
;
140 hw
->ack_intr
= ack_intr
;
144 * Probe for a Buddha or Catweasel IDE interface
147 static int __init
buddha_init(void)
153 struct zorro_dev
*z
= NULL
;
154 u_long buddha_board
= 0;
156 int buddha_num_hwifs
;
158 while ((z
= zorro_find_device(ZORRO_WILDCARD
, z
))) {
160 u8 idx
[4] = { 0xff, 0xff, 0xff, 0xff };
162 if (z
->id
== ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA
) {
163 buddha_num_hwifs
= BUDDHA_NUM_HWIFS
;
165 } else if (z
->id
== ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL
) {
166 buddha_num_hwifs
= CATWEASEL_NUM_HWIFS
;
167 type
=BOARD_CATWEASEL
;
168 } else if (z
->id
== ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF
) {
169 buddha_num_hwifs
= XSURF_NUM_HWIFS
;
174 board
= z
->resource
.start
;
177 * FIXME: we now have selectable mmio v/s iomio transports.
180 if(type
!= BOARD_XSURF
) {
181 if (!request_mem_region(board
+BUDDHA_BASE1
, 0x800, "IDE"))
184 if (!request_mem_region(board
+XSURF_BASE1
, 0x1000, "IDE"))
186 if (!request_mem_region(board
+XSURF_BASE2
, 0x1000, "IDE"))
188 if (!request_mem_region(board
+XSURF_IRQ1
, 0x8, "IDE")) {
189 release_mem_region(board
+XSURF_BASE2
, 0x1000);
191 release_mem_region(board
+XSURF_BASE1
, 0x1000);
195 buddha_board
= ZTWO_VADDR(board
);
197 /* write to BUDDHA_IRQ_MR to enable the board IRQ */
198 /* X-Surf doesn't have this. IRQs are always on */
199 if (type
!= BOARD_XSURF
)
200 z_writeb(0, buddha_board
+BUDDHA_IRQ_MR
);
202 printk(KERN_INFO
"ide: %s IDE controller\n",
203 buddha_board_name
[type
]);
205 for (i
= 0; i
< buddha_num_hwifs
; i
++) {
206 unsigned long base
, ctl
, irq_port
;
207 ide_ack_intr_t
*ack_intr
;
209 if (type
!= BOARD_XSURF
) {
210 base
= buddha_board
+ buddha_bases
[i
];
211 ctl
= base
+ BUDDHA_CONTROL
;
212 irq_port
= buddha_board
+ buddha_irqports
[i
];
213 ack_intr
= buddha_ack_intr
;
215 base
= buddha_board
+ xsurf_bases
[i
];
216 /* X-Surf has no CS1* (Control/AltStat) */
218 irq_port
= buddha_board
+ xsurf_irqports
[i
];
219 ack_intr
= xsurf_ack_intr
;
222 buddha_setup_ports(&hw
, base
, ctl
, irq_port
, ack_intr
);
224 hwif
= ide_find_port(hw
.io_ports
[IDE_DATA_OFFSET
]);
226 u8 index
= hwif
->index
;
228 ide_init_port_data(hwif
, index
);
229 ide_init_port_hw(hwif
, &hw
);
237 ide_device_add(idx
, NULL
);
243 module_init(buddha_init
);
245 MODULE_LICENSE("GPL");