drivers/net/gianfar_mii.c

   1 /*
   2  * drivers/net/gianfar_mii.c
   3  *
   4  * Gianfar Ethernet Driver -- MIIM bus implementation
   5  * Provides Bus interface for MIIM regs
   6  *
   7  * Author: Andy Fleming
   8  * Maintainer: Kumar Gala
   9  *
  10  * Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
  11  *
  12  * This program is free software; you can redistribute  it and/or modify it
  13  * under  the terms of  the GNU General  Public License as published by the
  14  * Free Software Foundation;  either version 2 of the  License, or (at your
  15  * option) any later version.
  16  *
  17  */
  18
  19 #include <linux/kernel.h>
  20 #include <linux/string.h>
  21 #include <linux/errno.h>
  22 #include <linux/unistd.h>
  23 #include <linux/slab.h>
  24 #include <linux/interrupt.h>
  25 #include <linux/init.h>
  26 #include <linux/delay.h>
  27 #include <linux/netdevice.h>
  28 #include <linux/etherdevice.h>
  29 #include <linux/skbuff.h>
  30 #include <linux/spinlock.h>
  31 #include <linux/mm.h>
  32 #include <linux/module.h>
  33 #include <linux/platform_device.h>
  34 #include <linux/crc32.h>
  35 #include <linux/mii.h>
  36 #include <linux/phy.h>
  37
  38 #include <asm/io.h>
  39 #include <asm/irq.h>
  40 #include <asm/uaccess.h>
  41
  42 #include "gianfar.h"
  43 #include "gianfar_mii.h"
  44
  45 /*
  46  * Write value to the PHY at mii_id at register regnum,
  47  * on the bus attached to the local interface, which may be different from the
  48  * generic mdio bus (tied to a single interface), waiting until the write is
  49  * done before returning. This is helpful in programming interfaces like
  50  * the TBI which control interfaces like onchip SERDES and are always tied to
  51  * the local mdio pins, which may not be the same as system mdio bus, used for
  52  * controlling the external PHYs, for example.
  53  */
  54 int gfar_local_mdio_write(struct gfar_mii *regs, int mii_id,
  55                           int regnum, u16 value)
  56 {
  57         /* Set the PHY address and the register address we want to write */
  58         gfar_write(&regs->miimadd, (mii_id << 8) | regnum);
  59
  60         /* Write out the value we want */
  61         gfar_write(&regs->miimcon, value);
  62
  63         /* Wait for the transaction to finish */
  64         while (gfar_read(&regs->miimind) & MIIMIND_BUSY)
  65                 cpu_relax();
  66
  67         return 0;
  68 }
  69
  70 /*
  71  * Read the bus for PHY at addr mii_id, register regnum, and
  72  * return the value.  Clears miimcom first.  All PHY operation
  73  * done on the bus attached to the local interface,
  74  * which may be different from the generic mdio bus
  75  * This is helpful in programming interfaces like
  76  * the TBI which, inturn, control interfaces like onchip SERDES
  77  * and are always tied to the local mdio pins, which may not be the
  78  * same as system mdio bus, used for controlling the external PHYs, for eg.
  79  */
  80 int gfar_local_mdio_read(struct gfar_mii *regs, int mii_id, int regnum)
  81
  82 {
  83         u16 value;
  84
  85         /* Set the PHY address and the register address we want to read */
  86         gfar_write(&regs->miimadd, (mii_id << 8) | regnum);
  87
  88         /* Clear miimcom, and then initiate a read */
  89         gfar_write(&regs->miimcom, 0);
  90         gfar_write(&regs->miimcom, MII_READ_COMMAND);
  91
  92         /* Wait for the transaction to finish */
  93         while (gfar_read(&regs->miimind) & (MIIMIND_NOTVALID | MIIMIND_BUSY))
  94                 cpu_relax();
  95
  96         /* Grab the value of the register from miimstat */
  97         value = gfar_read(&regs->miimstat);
  98
  99         return value;
 100 }
 101
 102 /* Write value to the PHY at mii_id at register regnum,
 103  * on the bus, waiting until the write is done before returning.
 104  * All PHY configuration is done through the TSEC1 MIIM regs */
 105 int gfar_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value)
 106 {
 107         struct gfar_mii __iomem *regs = (void __iomem *)bus->priv;
 108
 109         /* Write to the local MII regs */
 110         return(gfar_local_mdio_write(regs, mii_id, regnum, value));
 111 }
 112
 113 /* Read the bus for PHY at addr mii_id, register regnum, and
 114  * return the value.  Clears miimcom first.  All PHY
 115  * configuration has to be done through the TSEC1 MIIM regs */
 116 int gfar_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
 117 {
 118         struct gfar_mii __iomem *regs = (void __iomem *)bus->priv;
 119
 120         /* Read the local MII regs */
 121         return(gfar_local_mdio_read(regs, mii_id, regnum));
 122 }
 123
 124 /* Reset the MIIM registers, and wait for the bus to free */
 125 int gfar_mdio_reset(struct mii_bus *bus)
 126 {
 127         struct gfar_mii __iomem *regs = (void __iomem *)bus->priv;
 128         unsigned int timeout = PHY_INIT_TIMEOUT;
 129
 130         spin_lock_bh(&bus->mdio_lock);
 131
 132         /* Reset the management interface */
 133         gfar_write(&regs->miimcfg, MIIMCFG_RESET);
 134
 135         /* Setup the MII Mgmt clock speed */
 136         gfar_write(&regs->miimcfg, MIIMCFG_INIT_VALUE);
 137
 138         /* Wait until the bus is free */
 139         while ((gfar_read(&regs->miimind) & MIIMIND_BUSY) &&
 140                         timeout--)
 141                 cpu_relax();
 142
 143         spin_unlock_bh(&bus->mdio_lock);
 144
 145         if(timeout <= 0) {
 146                 printk(KERN_ERR "%s: The MII Bus is stuck!\n",
 147                                 bus->name);
 148                 return -EBUSY;
 149         }
 150
 151         return 0;
 152 }
 153
 154
 155 int gfar_mdio_probe(struct device *dev)
 156 {
 157         struct platform_device *pdev = to_platform_device(dev);
 158         struct gianfar_mdio_data *pdata;
 159         struct gfar_mii __iomem *regs;
 160         struct mii_bus *new_bus;
 161         struct resource *r;
 162         int err = 0;
 163
 164         if (NULL == dev)
 165                 return -EINVAL;
 166
 167         new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL);
 168
 169         if (NULL == new_bus)
 170                 return -ENOMEM;
 171
 172         new_bus->name = "Gianfar MII Bus",
 173         new_bus->read = &gfar_mdio_read,
 174         new_bus->write = &gfar_mdio_write,
 175         new_bus->reset = &gfar_mdio_reset,
 176         new_bus->id = pdev->id;
 177
 178         pdata = (struct gianfar_mdio_data *)pdev->dev.platform_data;
 179
 180         if (NULL == pdata) {
 181                 printk(KERN_ERR "gfar mdio %d: Missing platform data!\n", pdev->id);
 182                 return -ENODEV;
 183         }
 184
 185         r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 186
 187         /* Set the PHY base address */
 188         regs = ioremap(r->start, sizeof (struct gfar_mii));
 189
 190         if (NULL == regs) {
 191                 err = -ENOMEM;
 192                 goto reg_map_fail;
 193         }
 194
 195         new_bus->priv = (void __force *)regs;
 196
 197         new_bus->irq = pdata->irq;
 198
 199         new_bus->dev = dev;
 200         dev_set_drvdata(dev, new_bus);
 201
 202         err = mdiobus_register(new_bus);
 203
 204         if (0 != err) {
 205                 printk (KERN_ERR "%s: Cannot register as MDIO bus\n",
 206                                 new_bus->name);
 207                 goto bus_register_fail;
 208         }
 209
 210         return 0;
 211
 212 bus_register_fail:
 213         iounmap(regs);
 214 reg_map_fail:
 215         kfree(new_bus);
 216
 217         return err;
 218 }
 219
 220
 221 int gfar_mdio_remove(struct device *dev)
 222 {
 223         struct mii_bus *bus = dev_get_drvdata(dev);
 224
 225         mdiobus_unregister(bus);
 226
 227         dev_set_drvdata(dev, NULL);
 228
 229         iounmap((void __iomem *)bus->priv);
 230         bus->priv = NULL;
 231         kfree(bus);
 232
 233         return 0;
 234 }
 235
 236 static struct device_driver gianfar_mdio_driver = {
 237         .name = "fsl-gianfar_mdio",
 238         .bus = &platform_bus_type,
 239         .probe = gfar_mdio_probe,
 240         .remove = gfar_mdio_remove,
 241 };
 242
 243 int __init gfar_mdio_init(void)
 244 {
 245         return driver_register(&gianfar_mdio_driver);
 246 }
 247
 248 void gfar_mdio_exit(void)
 249 {
 250         driver_unregister(&gianfar_mdio_driver);
 251 }