?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
nozomi: constify driver
[linux-2.6/s3c2410-cpufreq.git] / drivers / net / tulip / de4x5.c
blob6c6fc325c8f96856a7a511a17b163bce3b54d5ab
1 /* de4x5.c: A DIGITAL DC21x4x DECchip and DE425/DE434/DE435/DE450/DE500
2 ethernet driver for Linux.
3
4 Copyright 1994, 1995 Digital Equipment Corporation.
5
6 Testing resources for this driver have been made available
7 in part by NASA Ames Research Center (mjacob@nas.nasa.gov).
8
9 The author may be reached at davies@maniac.ultranet.com.
10
11 This program is free software; you can redistribute it and/or modify it
12 under the terms of the GNU General Public License as published by the
13 Free Software Foundation; either version 2 of the License, or (at your
14 option) any later version.
15
16 THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
17 WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
18 MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
19 NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
20 INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
21 NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
22 USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
23 ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
24 (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
25 THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
26
27 You should have received a copy of the GNU General Public License along
28 with this program; if not, write to the Free Software Foundation, Inc.,
29 675 Mass Ave, Cambridge, MA 02139, USA.
30
31 Originally, this driver was written for the Digital Equipment
32 Corporation series of EtherWORKS ethernet cards:
33
34 DE425 TP/COAX EISA
35 DE434 TP PCI
36 DE435 TP/COAX/AUI PCI
37 DE450 TP/COAX/AUI PCI
38 DE500 10/100 PCI Fasternet
39
40 but it will now attempt to support all cards which conform to the
41 Digital Semiconductor SROM Specification. The driver currently
42 recognises the following chips:
43
44 DC21040 (no SROM)
45 DC21041[A]
46 DC21140[A]
47 DC21142
48 DC21143
49
50 So far the driver is known to work with the following cards:
51
52 KINGSTON
53 Linksys
54 ZNYX342
55 SMC8432
56 SMC9332 (w/new SROM)
57 ZNYX31[45]
58 ZNYX346 10/100 4 port (can act as a 10/100 bridge!)
59
60 The driver has been tested on a relatively busy network using the DE425,
61 DE434, DE435 and DE500 cards and benchmarked with 'ttcp': it transferred
62 16M of data to a DECstation 5000/200 as follows:
63
64 TCP UDP
65 TX RX TX RX
66 DE425 1030k 997k 1170k 1128k
67 DE434 1063k 995k 1170k 1125k
68 DE435 1063k 995k 1170k 1125k
69 DE500 1063k 998k 1170k 1125k in 10Mb/s mode
70
71 All values are typical (in kBytes/sec) from a sample of 4 for each
72 measurement. Their error is +/-20k on a quiet (private) network and also
73 depend on what load the CPU has.
74
75 =========================================================================
76 This driver has been written substantially from scratch, although its
77 inheritance of style and stack interface from 'ewrk3.c' and in turn from
78 Donald Becker's 'lance.c' should be obvious. With the module autoload of
79 every usable DECchip board, I pinched Donald's 'next_module' field to
80 link my modules together.
81
82 Upto 15 EISA cards can be supported under this driver, limited primarily
83 by the available IRQ lines. I have checked different configurations of
84 multiple depca, EtherWORKS 3 cards and de4x5 cards and have not found a
85 problem yet (provided you have at least depca.c v0.38) ...
86
87 PCI support has been added to allow the driver to work with the DE434,
88 DE435, DE450 and DE500 cards. The I/O accesses are a bit of a kludge due
89 to the differences in the EISA and PCI CSR address offsets from the base
90 address.
91
92 The ability to load this driver as a loadable module has been included
93 and used extensively during the driver development (to save those long
94 reboot sequences). Loadable module support under PCI and EISA has been
95 achieved by letting the driver autoprobe as if it were compiled into the
96 kernel. Do make sure you're not sharing interrupts with anything that
97 cannot accommodate interrupt sharing!
98
99 To utilise this ability, you have to do 8 things:
100
101 0) have a copy of the loadable modules code installed on your system.
102 1) copy de4x5.c from the /linux/drivers/net directory to your favourite
103 temporary directory.
104 2) for fixed autoprobes (not recommended), edit the source code near
105 line 5594 to reflect the I/O address you're using, or assign these when
106 loading by:
107
108 insmod de4x5 io=0xghh where g = bus number
109 hh = device number
110
111 NB: autoprobing for modules is now supported by default. You may just
112 use:
113
114 insmod de4x5
115
116 to load all available boards. For a specific board, still use
117 the 'io=?' above.
118 3) compile de4x5.c, but include -DMODULE in the command line to ensure
119 that the correct bits are compiled (see end of source code).
120 4) if you are wanting to add a new card, goto 5. Otherwise, recompile a
121 kernel with the de4x5 configuration turned off and reboot.
122 5) insmod de4x5 [io=0xghh]
123 6) run the net startup bits for your new eth?? interface(s) manually
124 (usually /etc/rc.inet[12] at boot time).
125 7) enjoy!
126
127 To unload a module, turn off the associated interface(s)
128 'ifconfig eth?? down' then 'rmmod de4x5'.
129
130 Automedia detection is included so that in principal you can disconnect
131 from, e.g. TP, reconnect to BNC and things will still work (after a
132 pause whilst the driver figures out where its media went). My tests
133 using ping showed that it appears to work....
134
135 By default, the driver will now autodetect any DECchip based card.
136 Should you have a need to restrict the driver to DIGITAL only cards, you
137 can compile with a DEC_ONLY define, or if loading as a module, use the
138 'dec_only=1' parameter.
139
140 I've changed the timing routines to use the kernel timer and scheduling
141 functions so that the hangs and other assorted problems that occurred
142 while autosensing the media should be gone. A bonus for the DC21040
143 auto media sense algorithm is that it can now use one that is more in
144 line with the rest (the DC21040 chip doesn't have a hardware timer).
145 The downside is the 1 'jiffies' (10ms) resolution.
146
147 IEEE 802.3u MII interface code has been added in anticipation that some
148 products may use it in the future.
149
150 The SMC9332 card has a non-compliant SROM which needs fixing - I have
151 patched this driver to detect it because the SROM format used complies
152 to a previous DEC-STD format.
153
154 I have removed the buffer copies needed for receive on Intels. I cannot
155 remove them for Alphas since the Tulip hardware only does longword
156 aligned DMA transfers and the Alphas get alignment traps with non
157 longword aligned data copies (which makes them really slow). No comment.
158
159 I have added SROM decoding routines to make this driver work with any
160 card that supports the Digital Semiconductor SROM spec. This will help
161 all cards running the dc2114x series chips in particular. Cards using
162 the dc2104x chips should run correctly with the basic driver. I'm in
163 debt to <mjacob@feral.com> for the testing and feedback that helped get
164 this feature working. So far we have tested KINGSTON, SMC8432, SMC9332
165 (with the latest SROM complying with the SROM spec V3: their first was
166 broken), ZNYX342 and LinkSys. ZYNX314 (dual 21041 MAC) and ZNYX 315
167 (quad 21041 MAC) cards also appear to work despite their incorrectly
168 wired IRQs.
169
170 I have added a temporary fix for interrupt problems when some SCSI cards
171 share the same interrupt as the DECchip based cards. The problem occurs
172 because the SCSI card wants to grab the interrupt as a fast interrupt
173 (runs the service routine with interrupts turned off) vs. this card
174 which really needs to run the service routine with interrupts turned on.
175 This driver will now add the interrupt service routine as a fast
176 interrupt if it is bounced from the slow interrupt. THIS IS NOT A
177 RECOMMENDED WAY TO RUN THE DRIVER and has been done for a limited time
178 until people sort out their compatibility issues and the kernel
179 interrupt service code is fixed. YOU SHOULD SEPARATE OUT THE FAST
180 INTERRUPT CARDS FROM THE SLOW INTERRUPT CARDS to ensure that they do not
181 run on the same interrupt. PCMCIA/CardBus is another can of worms...
182
183 Finally, I think I have really fixed the module loading problem with
184 more than one DECchip based card. As a side effect, I don't mess with
185 the device structure any more which means that if more than 1 card in
186 2.0.x is installed (4 in 2.1.x), the user will have to edit
187 linux/drivers/net/Space.c to make room for them. Hence, module loading
188 is the preferred way to use this driver, since it doesn't have this
189 limitation.
190
191 Where SROM media detection is used and full duplex is specified in the
192 SROM, the feature is ignored unless lp->params.fdx is set at compile
193 time OR during a module load (insmod de4x5 args='eth??:fdx' [see
194 below]). This is because there is no way to automatically detect full
195 duplex links except through autonegotiation. When I include the
196 autonegotiation feature in the SROM autoconf code, this detection will
197 occur automatically for that case.
198
199 Command line arguments are now allowed, similar to passing arguments
200 through LILO. This will allow a per adapter board set up of full duplex
201 and media. The only lexical constraints are: the board name (dev->name)
202 appears in the list before its parameters. The list of parameters ends
203 either at the end of the parameter list or with another board name. The
204 following parameters are allowed:
205
206 fdx for full duplex
207 autosense to set the media/speed; with the following
208 sub-parameters:
209 TP, TP_NW, BNC, AUI, BNC_AUI, 100Mb, 10Mb, AUTO
210
211 Case sensitivity is important for the sub-parameters. They *must* be
212 upper case. Examples:
213
214 insmod de4x5 args='eth1:fdx autosense=BNC eth0:autosense=100Mb'.
215
216 For a compiled in driver, at or above line 548, place e.g.
217 #define DE4X5_PARM "eth0:fdx autosense=AUI eth2:autosense=TP"
218
219 Yes, I know full duplex isn't permissible on BNC or AUI; they're just
220 examples. By default, full duplex is turned off and AUTO is the default
221 autosense setting. In reality, I expect only the full duplex option to
222 be used. Note the use of single quotes in the two examples above and the
223 lack of commas to separate items. ALSO, you must get the requested media
224 correct in relation to what the adapter SROM says it has. There's no way
225 to determine this in advance other than by trial and error and common
226 sense, e.g. call a BNC connectored port 'BNC', not '10Mb'.
227
228 Changed the bus probing. EISA used to be done first, followed by PCI.
229 Most people probably don't even know what a de425 is today and the EISA
230 probe has messed up some SCSI cards in the past, so now PCI is always
231 probed first followed by EISA if a) the architecture allows EISA and
232 either b) there have been no PCI cards detected or c) an EISA probe is
233 forced by the user. To force a probe include "force_eisa" in your
234 insmod "args" line; for built-in kernels either change the driver to do
235 this automatically or include #define DE4X5_FORCE_EISA on or before
236 line 1040 in the driver.
237
238 TO DO:
239 ------
240
241 Revision History
242 ----------------
243
244 Version Date Description
245
246 0.1 17-Nov-94 Initial writing. ALPHA code release.
247 0.2 13-Jan-95 Added PCI support for DE435's.
248 0.21 19-Jan-95 Added auto media detection.
249 0.22 10-Feb-95 Fix interrupt handler call <chris@cosy.sbg.ac.at>.
250 Fix recognition bug reported by <bkm@star.rl.ac.uk>.
251 Add request/release_region code.
252 Add loadable modules support for PCI.
253 Clean up loadable modules support.
254 0.23 28-Feb-95 Added DC21041 and DC21140 support.
255 Fix missed frame counter value and initialisation.
256 Fixed EISA probe.
257 0.24 11-Apr-95 Change delay routine to use <linux/udelay>.
258 Change TX_BUFFS_AVAIL macro.
259 Change media autodetection to allow manual setting.
260 Completed DE500 (DC21140) support.
261 0.241 18-Apr-95 Interim release without DE500 Autosense Algorithm.
262 0.242 10-May-95 Minor changes.
263 0.30 12-Jun-95 Timer fix for DC21140.
264 Portability changes.
265 Add ALPHA changes from <jestabro@ant.tay1.dec.com>.
266 Add DE500 semi automatic autosense.
267 Add Link Fail interrupt TP failure detection.
268 Add timer based link change detection.
269 Plugged a memory leak in de4x5_queue_pkt().
270 0.31 13-Jun-95 Fixed PCI stuff for 1.3.1.
271 0.32 26-Jun-95 Added verify_area() calls in de4x5_ioctl() from a
272 suggestion by <heiko@colossus.escape.de>.
273 0.33 8-Aug-95 Add shared interrupt support (not released yet).
274 0.331 21-Aug-95 Fix de4x5_open() with fast CPUs.
275 Fix de4x5_interrupt().
276 Fix dc21140_autoconf() mess.
277 No shared interrupt support.
278 0.332 11-Sep-95 Added MII management interface routines.
279 0.40 5-Mar-96 Fix setup frame timeout <maartenb@hpkuipc.cern.ch>.
280 Add kernel timer code (h/w is too flaky).
281 Add MII based PHY autosense.
282 Add new multicasting code.
283 Add new autosense algorithms for media/mode
284 selection using kernel scheduling/timing.
285 Re-formatted.
286 Made changes suggested by <jeff@router.patch.net>:
287 Change driver to detect all DECchip based cards
288 with DEC_ONLY restriction a special case.
289 Changed driver to autoprobe as a module. No irq
290 checking is done now - assume BIOS is good!
291 Added SMC9332 detection <manabe@Roy.dsl.tutics.ac.jp>
292 0.41 21-Mar-96 Don't check for get_hw_addr checksum unless DEC card
293 only <niles@axp745gsfc.nasa.gov>
294 Fix for multiple PCI cards reported by <jos@xos.nl>
295 Duh, put the IRQF_SHARED flag into request_interrupt().
296 Fix SMC ethernet address in enet_det[].
297 Print chip name instead of "UNKNOWN" during boot.
298 0.42 26-Apr-96 Fix MII write TA bit error.
299 Fix bug in dc21040 and dc21041 autosense code.
300 Remove buffer copies on receive for Intels.
301 Change sk_buff handling during media disconnects to
302 eliminate DUP packets.
303 Add dynamic TX thresholding.
304 Change all chips to use perfect multicast filtering.
305 Fix alloc_device() bug <jari@markkus2.fimr.fi>
306 0.43 21-Jun-96 Fix unconnected media TX retry bug.
307 Add Accton to the list of broken cards.
308 Fix TX under-run bug for non DC21140 chips.
309 Fix boot command probe bug in alloc_device() as
310 reported by <koen.gadeyne@barco.com> and
311 <orava@nether.tky.hut.fi>.
312 Add cache locks to prevent a race condition as
313 reported by <csd@microplex.com> and
314 <baba@beckman.uiuc.edu>.
315 Upgraded alloc_device() code.
316 0.431 28-Jun-96 Fix potential bug in queue_pkt() from discussion
317 with <csd@microplex.com>
318 0.44 13-Aug-96 Fix RX overflow bug in 2114[023] chips.
319 Fix EISA probe bugs reported by <os2@kpi.kharkov.ua>
320 and <michael@compurex.com>.
321 0.441 9-Sep-96 Change dc21041_autoconf() to probe quiet BNC media
322 with a loopback packet.
323 0.442 9-Sep-96 Include AUI in dc21041 media printout. Bug reported
324 by <bhat@mundook.cs.mu.OZ.AU>
325 0.45 8-Dec-96 Include endian functions for PPC use, from work
326 by <cort@cs.nmt.edu> and <g.thomas@opengroup.org>.
327 0.451 28-Dec-96 Added fix to allow autoprobe for modules after
328 suggestion from <mjacob@feral.com>.
329 0.5 30-Jan-97 Added SROM decoding functions.
330 Updated debug flags.
331 Fix sleep/wakeup calls for PCI cards, bug reported
332 by <cross@gweep.lkg.dec.com>.
333 Added multi-MAC, one SROM feature from discussion
334 with <mjacob@feral.com>.
335 Added full module autoprobe capability.
336 Added attempt to use an SMC9332 with broken SROM.
337 Added fix for ZYNX multi-mac cards that didn't
338 get their IRQs wired correctly.
339 0.51 13-Feb-97 Added endian fixes for the SROM accesses from
340 <paubert@iram.es>
341 Fix init_connection() to remove extra device reset.
342 Fix MAC/PHY reset ordering in dc21140m_autoconf().
343 Fix initialisation problem with lp->timeout in
344 typeX_infoblock() from <paubert@iram.es>.
345 Fix MII PHY reset problem from work done by
346 <paubert@iram.es>.
347 0.52 26-Apr-97 Some changes may not credit the right people -
348 a disk crash meant I lost some mail.
349 Change RX interrupt routine to drop rather than
350 defer packets to avoid hang reported by
351 <g.thomas@opengroup.org>.
352 Fix srom_exec() to return for COMPACT and type 1
353 infoblocks.
354 Added DC21142 and DC21143 functions.
355 Added byte counters from <phil@tazenda.demon.co.uk>
356 Added IRQF_DISABLED temporary fix from
357 <mjacob@feral.com>.
358 0.53 12-Nov-97 Fix the *_probe() to include 'eth??' name during
359 module load: bug reported by
360 <Piete.Brooks@cl.cam.ac.uk>
361 Fix multi-MAC, one SROM, to work with 2114x chips:
362 bug reported by <cmetz@inner.net>.
363 Make above search independent of BIOS device scan
364 direction.
365 Completed DC2114[23] autosense functions.
366 0.531 21-Dec-97 Fix DE500-XA 100Mb/s bug reported by
367 <robin@intercore.com
368 Fix type1_infoblock() bug introduced in 0.53, from
369 problem reports by
370 <parmee@postecss.ncrfran.france.ncr.com> and
371 <jo@ice.dillingen.baynet.de>.
372 Added argument list to set up each board from either
373 a module's command line or a compiled in #define.
374 Added generic MII PHY functionality to deal with
375 newer PHY chips.
376 Fix the mess in 2.1.67.
377 0.532 5-Jan-98 Fix bug in mii_get_phy() reported by
378 <redhat@cococo.net>.
379 Fix bug in pci_probe() for 64 bit systems reported
380 by <belliott@accessone.com>.
381 0.533 9-Jan-98 Fix more 64 bit bugs reported by <jal@cs.brown.edu>.
382 0.534 24-Jan-98 Fix last (?) endian bug from <geert@linux-m68k.org>
383 0.535 21-Feb-98 Fix Ethernet Address PROM reset bug for DC21040.
384 0.536 21-Mar-98 Change pci_probe() to use the pci_dev structure.
385 **Incompatible with 2.0.x from here.**
386 0.540 5-Jul-98 Atomicize assertion of dev->interrupt for SMP
387 from <lma@varesearch.com>
388 Add TP, AUI and BNC cases to 21140m_autoconf() for
389 case where a 21140 under SROM control uses, e.g. AUI
390 from problem report by <delchini@lpnp09.in2p3.fr>
391 Add MII parallel detection to 2114x_autoconf() for
392 case where no autonegotiation partner exists from
393 problem report by <mlapsley@ndirect.co.uk>.
394 Add ability to force connection type directly even
395 when using SROM control from problem report by
396 <earl@exis.net>.
397 Updated the PCI interface to conform with the latest
398 version. I hope nothing is broken...
399 Add TX done interrupt modification from suggestion
400 by <Austin.Donnelly@cl.cam.ac.uk>.
401 Fix is_anc_capable() bug reported by
402 <Austin.Donnelly@cl.cam.ac.uk>.
403 Fix type[13]_infoblock() bug: during MII search, PHY
404 lp->rst not run because lp->ibn not initialised -
405 from report & fix by <paubert@iram.es>.
406 Fix probe bug with EISA & PCI cards present from
407 report by <eirik@netcom.com>.
408 0.541 24-Aug-98 Fix compiler problems associated with i386-string
409 ops from multiple bug reports and temporary fix
410 from <paubert@iram.es>.
411 Fix pci_probe() to correctly emulate the old
412 pcibios_find_class() function.
413 Add an_exception() for old ZYNX346 and fix compile
414 warning on PPC & SPARC, from <ecd@skynet.be>.
415 Fix lastPCI to correctly work with compiled in
416 kernels and modules from bug report by
417 <Zlatko.Calusic@CARNet.hr> et al.
418 0.542 15-Sep-98 Fix dc2114x_autoconf() to stop multiple messages
419 when media is unconnected.
420 Change dev->interrupt to lp->interrupt to ensure
421 alignment for Alpha's and avoid their unaligned
422 access traps. This flag is merely for log messages:
423 should do something more definitive though...
424 0.543 30-Dec-98 Add SMP spin locking.
425 0.544 8-May-99 Fix for buggy SROM in Motorola embedded boards using
426 a 21143 by <mmporter@home.com>.
427 Change PCI/EISA bus probing order.
428 0.545 28-Nov-99 Further Moto SROM bug fix from
429 <mporter@eng.mcd.mot.com>
430 Remove double checking for DEBUG_RX in de4x5_dbg_rx()
431 from report by <geert@linux-m68k.org>
432 0.546 22-Feb-01 Fixes Alpha XP1000 oops. The srom_search function
433 was causing a page fault when initializing the
434 variable 'pb', on a non de4x5 PCI device, in this
435 case a PCI bridge (DEC chip 21152). The value of
436 'pb' is now only initialized if a de4x5 chip is
437 present.
438 <france@handhelds.org>
439 0.547 08-Nov-01 Use library crc32 functions by <Matt_Domsch@dell.com>
440 0.548 30-Aug-03 Big 2.6 cleanup. Ported to PCI/EISA probing and
441 generic DMA APIs. Fixed DE425 support on Alpha.
442 <maz@wild-wind.fr.eu.org>
443 =========================================================================
444 */
445
446 #include <linux/module.h>
447 #include <linux/kernel.h>
448 #include <linux/string.h>
449 #include <linux/interrupt.h>
450 #include <linux/ptrace.h>
451 #include <linux/errno.h>
452 #include <linux/ioport.h>
453 #include <linux/slab.h>
454 #include <linux/pci.h>
455 #include <linux/eisa.h>
456 #include <linux/delay.h>
457 #include <linux/init.h>
458 #include <linux/spinlock.h>
459 #include <linux/crc32.h>
460 #include <linux/netdevice.h>
461 #include <linux/etherdevice.h>
462 #include <linux/skbuff.h>
463 #include <linux/time.h>
464 #include <linux/types.h>
465 #include <linux/unistd.h>
466 #include <linux/ctype.h>
467 #include <linux/dma-mapping.h>
468 #include <linux/moduleparam.h>
469 #include <linux/bitops.h>
470
471 #include <asm/io.h>
472 #include <asm/dma.h>
473 #include <asm/byteorder.h>
474 #include <asm/unaligned.h>
475 #include <asm/uaccess.h>
476 #ifdef CONFIG_PPC_PMAC
477 #include <asm/machdep.h>
478 #endif /* CONFIG_PPC_PMAC */
479
480 #include "de4x5.h"
481
482 static char version[] __devinitdata = "de4x5.c:V0.546 2001/02/22 davies@maniac.ultranet.com\n";
483
484 #define c_char const char
485 #define TWIDDLE(a) (u_short)le16_to_cpu(get_unaligned((__le16 *)(a)))
486
487 /*
488 ** MII Information
489 */
490 struct phy_table {
491 int reset; /* Hard reset required? */
492 int id; /* IEEE OUI */
493 int ta; /* One cycle TA time - 802.3u is confusing here */
494 struct { /* Non autonegotiation (parallel) speed det. */
495 int reg;
496 int mask;
497 int value;
498 } spd;
499 };
500
501 struct mii_phy {
502 int reset; /* Hard reset required? */
503 int id; /* IEEE OUI */
504 int ta; /* One cycle TA time */
505 struct { /* Non autonegotiation (parallel) speed det. */
506 int reg;
507 int mask;
508 int value;
509 } spd;
510 int addr; /* MII address for the PHY */
511 u_char *gep; /* Start of GEP sequence block in SROM */
512 u_char *rst; /* Start of reset sequence in SROM */
513 u_int mc; /* Media Capabilities */
514 u_int ana; /* NWay Advertisement */
515 u_int fdx; /* Full DupleX capabilities for each media */
516 u_int ttm; /* Transmit Threshold Mode for each media */
517 u_int mci; /* 21142 MII Connector Interrupt info */
518 };
519
520 #define DE4X5_MAX_PHY 8 /* Allow upto 8 attached PHY devices per board */
521
522 struct sia_phy {
523 u_char mc; /* Media Code */
524 u_char ext; /* csr13-15 valid when set */
525 int csr13; /* SIA Connectivity Register */
526 int csr14; /* SIA TX/RX Register */
527 int csr15; /* SIA General Register */
528 int gepc; /* SIA GEP Control Information */
529 int gep; /* SIA GEP Data */
530 };
531
532 /*
533 ** Define the know universe of PHY devices that can be
534 ** recognised by this driver.
535 */
536 static struct phy_table phy_info[] = {
537 {0, NATIONAL_TX, 1, {0x19, 0x40, 0x00}}, /* National TX */
538 {1, BROADCOM_T4, 1, {0x10, 0x02, 0x02}}, /* Broadcom T4 */
539 {0, SEEQ_T4 , 1, {0x12, 0x10, 0x10}}, /* SEEQ T4 */
540 {0, CYPRESS_T4 , 1, {0x05, 0x20, 0x20}}, /* Cypress T4 */
541 {0, 0x7810 , 1, {0x14, 0x0800, 0x0800}} /* Level One LTX970 */
542 };
543
544 /*
545 ** These GENERIC values assumes that the PHY devices follow 802.3u and
546 ** allow parallel detection to set the link partner ability register.
547 ** Detection of 100Base-TX [H/F Duplex] and 100Base-T4 is supported.
548 */
549 #define GENERIC_REG 0x05 /* Autoneg. Link Partner Advertisement Reg. */
550 #define GENERIC_MASK MII_ANLPA_100M /* All 100Mb/s Technologies */
551 #define GENERIC_VALUE MII_ANLPA_100M /* 100B-TX, 100B-TX FDX, 100B-T4 */
552
553 /*
554 ** Define special SROM detection cases
555 */
556 static c_char enet_det[][ETH_ALEN] = {
557 {0x00, 0x00, 0xc0, 0x00, 0x00, 0x00},
558 {0x00, 0x00, 0xe8, 0x00, 0x00, 0x00}
559 };
560
561 #define SMC 1
562 #define ACCTON 2
563
564 /*
565 ** SROM Repair definitions. If a broken SROM is detected a card may
566 ** use this information to help figure out what to do. This is a
567 ** "stab in the dark" and so far for SMC9332's only.
568 */
569 static c_char srom_repair_info[][100] = {
570 {0x00,0x1e,0x00,0x00,0x00,0x08, /* SMC9332 */
571 0x1f,0x01,0x8f,0x01,0x00,0x01,0x00,0x02,
572 0x01,0x00,0x00,0x78,0xe0,0x01,0x00,0x50,
573 0x00,0x18,}
574 };
575
576
577 #ifdef DE4X5_DEBUG
578 static int de4x5_debug = DE4X5_DEBUG;
579 #else
580 /*static int de4x5_debug = (DEBUG_MII | DEBUG_SROM | DEBUG_PCICFG | DEBUG_MEDIA | DEBUG_VERSION);*/
581 static int de4x5_debug = (DEBUG_MEDIA | DEBUG_VERSION);
582 #endif
583
584 /*
585 ** Allow per adapter set up. For modules this is simply a command line
586 ** parameter, e.g.:
587 ** insmod de4x5 args='eth1:fdx autosense=BNC eth0:autosense=100Mb'.
588 **
589 ** For a compiled in driver, place e.g.
590 ** #define DE4X5_PARM "eth0:fdx autosense=AUI eth2:autosense=TP"
591 ** here
592 */
593 #ifdef DE4X5_PARM
594 static char *args = DE4X5_PARM;
595 #else
596 static char *args;
597 #endif
598
599 struct parameters {
600 bool fdx;
601 int autosense;
602 };
603
604 #define DE4X5_AUTOSENSE_MS 250 /* msec autosense tick (DE500) */
605
606 #define DE4X5_NDA 0xffe0 /* No Device (I/O) Address */
607
608 /*
609 ** Ethernet PROM defines
610 */
611 #define PROBE_LENGTH 32
612 #define ETH_PROM_SIG 0xAA5500FFUL
613
614 /*
615 ** Ethernet Info
616 */
617 #define PKT_BUF_SZ 1536 /* Buffer size for each Tx/Rx buffer */
618 #define IEEE802_3_SZ 1518 /* Packet + CRC */
619 #define MAX_PKT_SZ 1514 /* Maximum ethernet packet length */
620 #define MAX_DAT_SZ 1500 /* Maximum ethernet data length */
621 #define MIN_DAT_SZ 1 /* Minimum ethernet data length */
622 #define PKT_HDR_LEN 14 /* Addresses and data length info */
623 #define FAKE_FRAME_LEN (MAX_PKT_SZ + 1)
624 #define QUEUE_PKT_TIMEOUT (3*HZ) /* 3 second timeout */
625
626
627 /*
628 ** EISA bus defines
629 */
630 #define DE4X5_EISA_IO_PORTS 0x0c00 /* I/O port base address, slot 0 */
631 #define DE4X5_EISA_TOTAL_SIZE 0x100 /* I/O address extent */
632
633 #define EISA_ALLOWED_IRQ_LIST {5, 9, 10, 11}
634
635 #define DE4X5_SIGNATURE {"DE425","DE434","DE435","DE450","DE500"}
636 #define DE4X5_NAME_LENGTH 8
637
638 static c_char *de4x5_signatures[] = DE4X5_SIGNATURE;
639
640 /*
641 ** Ethernet PROM defines for DC21040
642 */
643 #define PROBE_LENGTH 32
644 #define ETH_PROM_SIG 0xAA5500FFUL
645
646 /*
647 ** PCI Bus defines
648 */
649 #define PCI_MAX_BUS_NUM 8
650 #define DE4X5_PCI_TOTAL_SIZE 0x80 /* I/O address extent */
651 #define DE4X5_CLASS_CODE 0x00020000 /* Network controller, Ethernet */
652
653 /*
654 ** Memory Alignment. Each descriptor is 4 longwords long. To force a
655 ** particular alignment on the TX descriptor, adjust DESC_SKIP_LEN and
656 ** DESC_ALIGN. ALIGN aligns the start address of the private memory area
657 ** and hence the RX descriptor ring's first entry.
658 */
659 #define DE4X5_ALIGN4 ((u_long)4 - 1) /* 1 longword align */
660 #define DE4X5_ALIGN8 ((u_long)8 - 1) /* 2 longword align */
661 #define DE4X5_ALIGN16 ((u_long)16 - 1) /* 4 longword align */
662 #define DE4X5_ALIGN32 ((u_long)32 - 1) /* 8 longword align */
663 #define DE4X5_ALIGN64 ((u_long)64 - 1) /* 16 longword align */
664 #define DE4X5_ALIGN128 ((u_long)128 - 1) /* 32 longword align */
665
666 #define DE4X5_ALIGN DE4X5_ALIGN32 /* Keep the DC21040 happy... */
667 #define DE4X5_CACHE_ALIGN CAL_16LONG
668 #define DESC_SKIP_LEN DSL_0 /* Must agree with DESC_ALIGN */
669 /*#define DESC_ALIGN u32 dummy[4]; / * Must agree with DESC_SKIP_LEN */
670 #define DESC_ALIGN
671
672 #ifndef DEC_ONLY /* See README.de4x5 for using this */
673 static int dec_only;
674 #else
675 static int dec_only = 1;
676 #endif
677
678 /*
679 ** DE4X5 IRQ ENABLE/DISABLE
680 */
681 #define ENABLE_IRQs { \
682 imr |= lp->irq_en;\
683 outl(imr, DE4X5_IMR); /* Enable the IRQs */\
684 }
685
686 #define DISABLE_IRQs {\
687 imr = inl(DE4X5_IMR);\
688 imr &= ~lp->irq_en;\
689 outl(imr, DE4X5_IMR); /* Disable the IRQs */\
690 }
691
692 #define UNMASK_IRQs {\
693 imr |= lp->irq_mask;\
694 outl(imr, DE4X5_IMR); /* Unmask the IRQs */\
695 }
696
697 #define MASK_IRQs {\
698 imr = inl(DE4X5_IMR);\
699 imr &= ~lp->irq_mask;\
700 outl(imr, DE4X5_IMR); /* Mask the IRQs */\
701 }
702
703 /*
704 ** DE4X5 START/STOP
705 */
706 #define START_DE4X5 {\
707 omr = inl(DE4X5_OMR);\
708 omr |= OMR_ST | OMR_SR;\
709 outl(omr, DE4X5_OMR); /* Enable the TX and/or RX */\
710 }
711
712 #define STOP_DE4X5 {\
713 omr = inl(DE4X5_OMR);\
714 omr &= ~(OMR_ST|OMR_SR);\
715 outl(omr, DE4X5_OMR); /* Disable the TX and/or RX */ \
716 }
717
718 /*
719 ** DE4X5 SIA RESET
720 */
721 #define RESET_SIA outl(0, DE4X5_SICR); /* Reset SIA connectivity regs */
722
723 /*
724 ** DE500 AUTOSENSE TIMER INTERVAL (MILLISECS)
725 */
726 #define DE4X5_AUTOSENSE_MS 250
727
728 /*
729 ** SROM Structure
730 */
731 struct de4x5_srom {
732 char sub_vendor_id[2];
733 char sub_system_id[2];
734 char reserved[12];
735 char id_block_crc;
736 char reserved2;
737 char version;
738 char num_controllers;
739 char ieee_addr[6];
740 char info[100];
741 short chksum;
742 };
743 #define SUB_VENDOR_ID 0x500a
744
745 /*
746 ** DE4X5 Descriptors. Make sure that all the RX buffers are contiguous
747 ** and have sizes of both a power of 2 and a multiple of 4.
748 ** A size of 256 bytes for each buffer could be chosen because over 90% of
749 ** all packets in our network are <256 bytes long and 64 longword alignment
750 ** is possible. 1536 showed better 'ttcp' performance. Take your pick. 32 TX
751 ** descriptors are needed for machines with an ALPHA CPU.
752 */
753 #define NUM_RX_DESC 8 /* Number of RX descriptors */
754 #define NUM_TX_DESC 32 /* Number of TX descriptors */
755 #define RX_BUFF_SZ 1536 /* Power of 2 for kmalloc and */
756 /* Multiple of 4 for DC21040 */
757 /* Allows 512 byte alignment */
758 struct de4x5_desc {
759 volatile __le32 status;
760 __le32 des1;
761 __le32 buf;
762 __le32 next;
763 DESC_ALIGN
764 };
765
766 /*
767 ** The DE4X5 private structure
768 */
769 #define DE4X5_PKT_STAT_SZ 16
770 #define DE4X5_PKT_BIN_SZ 128 /* Should be >=100 unless you
771 increase DE4X5_PKT_STAT_SZ */
772
773 struct pkt_stats {
774 u_int bins[DE4X5_PKT_STAT_SZ]; /* Private stats counters */
775 u_int unicast;
776 u_int multicast;
777 u_int broadcast;
778 u_int excessive_collisions;
779 u_int tx_underruns;
780 u_int excessive_underruns;
781 u_int rx_runt_frames;
782 u_int rx_collision;
783 u_int rx_dribble;
784 u_int rx_overflow;
785 };
786
787 struct de4x5_private {
788 char adapter_name[80]; /* Adapter name */
789 u_long interrupt; /* Aligned ISR flag */
790 struct de4x5_desc *rx_ring; /* RX descriptor ring */
791 struct de4x5_desc *tx_ring; /* TX descriptor ring */
792 struct sk_buff *tx_skb[NUM_TX_DESC]; /* TX skb for freeing when sent */
793 struct sk_buff *rx_skb[NUM_RX_DESC]; /* RX skb's */
794 int rx_new, rx_old; /* RX descriptor ring pointers */
795 int tx_new, tx_old; /* TX descriptor ring pointers */
796 char setup_frame[SETUP_FRAME_LEN]; /* Holds MCA and PA info. */
797 char frame[64]; /* Min sized packet for loopback*/
798 spinlock_t lock; /* Adapter specific spinlock */
799 struct net_device_stats stats; /* Public stats */
800 struct pkt_stats pktStats; /* Private stats counters */
801 char rxRingSize;
802 char txRingSize;
803 int bus; /* EISA or PCI */
804 int bus_num; /* PCI Bus number */
805 int device; /* Device number on PCI bus */
806 int state; /* Adapter OPENED or CLOSED */
807 int chipset; /* DC21040, DC21041 or DC21140 */
808 s32 irq_mask; /* Interrupt Mask (Enable) bits */
809 s32 irq_en; /* Summary interrupt bits */
810 int media; /* Media (eg TP), mode (eg 100B)*/
811 int c_media; /* Remember the last media conn */
812 bool fdx; /* media full duplex flag */
813 int linkOK; /* Link is OK */
814 int autosense; /* Allow/disallow autosensing */
815 bool tx_enable; /* Enable descriptor polling */
816 int setup_f; /* Setup frame filtering type */
817 int local_state; /* State within a 'media' state */
818 struct mii_phy phy[DE4X5_MAX_PHY]; /* List of attached PHY devices */
819 struct sia_phy sia; /* SIA PHY Information */
820 int active; /* Index to active PHY device */
821 int mii_cnt; /* Number of attached PHY's */
822 int timeout; /* Scheduling counter */
823 struct timer_list timer; /* Timer info for kernel */
824 int tmp; /* Temporary global per card */
825 struct {
826 u_long lock; /* Lock the cache accesses */
827 s32 csr0; /* Saved Bus Mode Register */
828 s32 csr6; /* Saved Operating Mode Reg. */
829 s32 csr7; /* Saved IRQ Mask Register */
830 s32 gep; /* Saved General Purpose Reg. */
831 s32 gepc; /* Control info for GEP */
832 s32 csr13; /* Saved SIA Connectivity Reg. */
833 s32 csr14; /* Saved SIA TX/RX Register */
834 s32 csr15; /* Saved SIA General Register */
835 int save_cnt; /* Flag if state already saved */
836 struct sk_buff *skb; /* Save the (re-ordered) skb's */
837 } cache;
838 struct de4x5_srom srom; /* A copy of the SROM */
839 int cfrv; /* Card CFRV copy */
840 int rx_ovf; /* Check for 'RX overflow' tag */
841 bool useSROM; /* For non-DEC card use SROM */
842 bool useMII; /* Infoblock using the MII */
843 int asBitValid; /* Autosense bits in GEP? */
844 int asPolarity; /* 0 => asserted high */
845 int asBit; /* Autosense bit number in GEP */
846 int defMedium; /* SROM default medium */
847 int tcount; /* Last infoblock number */
848 int infoblock_init; /* Initialised this infoblock? */
849 int infoleaf_offset; /* SROM infoleaf for controller */
850 s32 infoblock_csr6; /* csr6 value in SROM infoblock */
851 int infoblock_media; /* infoblock media */
852 int (*infoleaf_fn)(struct net_device *); /* Pointer to infoleaf function */
853 u_char *rst; /* Pointer to Type 5 reset info */
854 u_char ibn; /* Infoblock number */
855 struct parameters params; /* Command line/ #defined params */
856 struct device *gendev; /* Generic device */
857 dma_addr_t dma_rings; /* DMA handle for rings */
858 int dma_size; /* Size of the DMA area */
859 char *rx_bufs; /* rx bufs on alpha, sparc, ... */
860 };
861
862 /*
863 ** To get around certain poxy cards that don't provide an SROM
864 ** for the second and more DECchip, I have to key off the first
865 ** chip's address. I'll assume there's not a bad SROM iff:
866 **
867 ** o the chipset is the same
868 ** o the bus number is the same and > 0
869 ** o the sum of all the returned hw address bytes is 0 or 0x5fa
870 **
871 ** Also have to save the irq for those cards whose hardware designers
872 ** can't follow the PCI to PCI Bridge Architecture spec.
873 */
874 static struct {
875 int chipset;
876 int bus;
877 int irq;
878 u_char addr[ETH_ALEN];
879 } last = {0,};
880
881 /*
882 ** The transmit ring full condition is described by the tx_old and tx_new
883 ** pointers by:
884 ** tx_old = tx_new Empty ring
885 ** tx_old = tx_new+1 Full ring
886 ** tx_old+txRingSize = tx_new+1 Full ring (wrapped condition)
887 */
888 #define TX_BUFFS_AVAIL ((lp->tx_old<=lp->tx_new)?\
889 lp->tx_old+lp->txRingSize-lp->tx_new-1:\
890 lp->tx_old -lp->tx_new-1)
891
892 #define TX_PKT_PENDING (lp->tx_old != lp->tx_new)
893
894 /*
895 ** Public Functions
896 */
897 static int de4x5_open(struct net_device *dev);
898 static int de4x5_queue_pkt(struct sk_buff *skb, struct net_device *dev);
899 static irqreturn_t de4x5_interrupt(int irq, void *dev_id);
900 static int de4x5_close(struct net_device *dev);
901 static struct net_device_stats *de4x5_get_stats(struct net_device *dev);
902 static void de4x5_local_stats(struct net_device *dev, char *buf, int pkt_len);
903 static void set_multicast_list(struct net_device *dev);
904 static int de4x5_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
905
906 /*
907 ** Private functions
908 */
909 static int de4x5_hw_init(struct net_device *dev, u_long iobase, struct device *gendev);
910 static int de4x5_init(struct net_device *dev);
911 static int de4x5_sw_reset(struct net_device *dev);
912 static int de4x5_rx(struct net_device *dev);
913 static int de4x5_tx(struct net_device *dev);
914 static void de4x5_ast(struct net_device *dev);
915 static int de4x5_txur(struct net_device *dev);
916 static int de4x5_rx_ovfc(struct net_device *dev);
917
918 static int autoconf_media(struct net_device *dev);
919 static void create_packet(struct net_device *dev, char *frame, int len);
920 static void load_packet(struct net_device *dev, char *buf, u32 flags, struct sk_buff *skb);
921 static int dc21040_autoconf(struct net_device *dev);
922 static int dc21041_autoconf(struct net_device *dev);
923 static int dc21140m_autoconf(struct net_device *dev);
924 static int dc2114x_autoconf(struct net_device *dev);
925 static int srom_autoconf(struct net_device *dev);
926 static int de4x5_suspect_state(struct net_device *dev, int timeout, int prev_state, int (*fn)(struct net_device *, int), int (*asfn)(struct net_device *));
927 static int dc21040_state(struct net_device *dev, int csr13, int csr14, int csr15, int timeout, int next_state, int suspect_state, int (*fn)(struct net_device *, int));
928 static int test_media(struct net_device *dev, s32 irqs, s32 irq_mask, s32 csr13, s32 csr14, s32 csr15, s32 msec);
929 static int test_for_100Mb(struct net_device *dev, int msec);
930 static int wait_for_link(struct net_device *dev);
931 static int test_mii_reg(struct net_device *dev, int reg, int mask, bool pol, long msec);
932 static int is_spd_100(struct net_device *dev);
933 static int is_100_up(struct net_device *dev);
934 static int is_10_up(struct net_device *dev);
935 static int is_anc_capable(struct net_device *dev);
936 static int ping_media(struct net_device *dev, int msec);
937 static struct sk_buff *de4x5_alloc_rx_buff(struct net_device *dev, int index, int len);
938 static void de4x5_free_rx_buffs(struct net_device *dev);
939 static void de4x5_free_tx_buffs(struct net_device *dev);
940 static void de4x5_save_skbs(struct net_device *dev);
941 static void de4x5_rst_desc_ring(struct net_device *dev);
942 static void de4x5_cache_state(struct net_device *dev, int flag);
943 static void de4x5_put_cache(struct net_device *dev, struct sk_buff *skb);
944 static void de4x5_putb_cache(struct net_device *dev, struct sk_buff *skb);
945 static struct sk_buff *de4x5_get_cache(struct net_device *dev);
946 static void de4x5_setup_intr(struct net_device *dev);
947 static void de4x5_init_connection(struct net_device *dev);
948 static int de4x5_reset_phy(struct net_device *dev);
949 static void reset_init_sia(struct net_device *dev, s32 sicr, s32 strr, s32 sigr);
950 static int test_ans(struct net_device *dev, s32 irqs, s32 irq_mask, s32 msec);
951 static int test_tp(struct net_device *dev, s32 msec);
952 static int EISA_signature(char *name, struct device *device);
953 static int PCI_signature(char *name, struct de4x5_private *lp);
954 static void DevicePresent(struct net_device *dev, u_long iobase);
955 static void enet_addr_rst(u_long aprom_addr);
956 static int de4x5_bad_srom(struct de4x5_private *lp);
957 static short srom_rd(u_long address, u_char offset);
958 static void srom_latch(u_int command, u_long address);
959 static void srom_command(u_int command, u_long address);
960 static void srom_address(u_int command, u_long address, u_char offset);
961 static short srom_data(u_int command, u_long address);
962 /*static void srom_busy(u_int command, u_long address);*/
963 static void sendto_srom(u_int command, u_long addr);
964 static int getfrom_srom(u_long addr);
965 static int srom_map_media(struct net_device *dev);
966 static int srom_infoleaf_info(struct net_device *dev);
967 static void srom_init(struct net_device *dev);
968 static void srom_exec(struct net_device *dev, u_char *p);
969 static int mii_rd(u_char phyreg, u_char phyaddr, u_long ioaddr);
970 static void mii_wr(int data, u_char phyreg, u_char phyaddr, u_long ioaddr);
971 static int mii_rdata(u_long ioaddr);
972 static void mii_wdata(int data, int len, u_long ioaddr);
973 static void mii_ta(u_long rw, u_long ioaddr);
974 static int mii_swap(int data, int len);
975 static void mii_address(u_char addr, u_long ioaddr);
976 static void sendto_mii(u32 command, int data, u_long ioaddr);
977 static int getfrom_mii(u32 command, u_long ioaddr);
978 static int mii_get_oui(u_char phyaddr, u_long ioaddr);
979 static int mii_get_phy(struct net_device *dev);
980 static void SetMulticastFilter(struct net_device *dev);
981 static int get_hw_addr(struct net_device *dev);
982 static void srom_repair(struct net_device *dev, int card);
983 static int test_bad_enet(struct net_device *dev, int status);
984 static int an_exception(struct de4x5_private *lp);
985 static char *build_setup_frame(struct net_device *dev, int mode);
986 static void disable_ast(struct net_device *dev);
987 static long de4x5_switch_mac_port(struct net_device *dev);
988 static int gep_rd(struct net_device *dev);
989 static void gep_wr(s32 data, struct net_device *dev);
990 static void yawn(struct net_device *dev, int state);
991 static void de4x5_parse_params(struct net_device *dev);
992 static void de4x5_dbg_open(struct net_device *dev);
993 static void de4x5_dbg_mii(struct net_device *dev, int k);
994 static void de4x5_dbg_media(struct net_device *dev);
995 static void de4x5_dbg_srom(struct de4x5_srom *p);
996 static void de4x5_dbg_rx(struct sk_buff *skb, int len);
997 static int de4x5_strncmp(char *a, char *b, int n);
998 static int dc21041_infoleaf(struct net_device *dev);
999 static int dc21140_infoleaf(struct net_device *dev);
1000 static int dc21142_infoleaf(struct net_device *dev);
1001 static int dc21143_infoleaf(struct net_device *dev);
1002 static int type0_infoblock(struct net_device *dev, u_char count, u_char *p);
1003 static int type1_infoblock(struct net_device *dev, u_char count, u_char *p);
1004 static int type2_infoblock(struct net_device *dev, u_char count, u_char *p);
1005 static int type3_infoblock(struct net_device *dev, u_char count, u_char *p);
1006 static int type4_infoblock(struct net_device *dev, u_char count, u_char *p);
1007 static int type5_infoblock(struct net_device *dev, u_char count, u_char *p);
1008 static int compact_infoblock(struct net_device *dev, u_char count, u_char *p);
1009
1010 /*
1011 ** Note now that module autoprobing is allowed under EISA and PCI. The
1012 ** IRQ lines will not be auto-detected; instead I'll rely on the BIOSes
1013 ** to "do the right thing".
1014 */
1015
1016 static int io=0x0;/* EDIT THIS LINE FOR YOUR CONFIGURATION IF NEEDED */
1017
1018 module_param(io, int, 0);
1019 module_param(de4x5_debug, int, 0);
1020 module_param(dec_only, int, 0);
1021 module_param(args, charp, 0);
1022
1023 MODULE_PARM_DESC(io, "de4x5 I/O base address");
1024 MODULE_PARM_DESC(de4x5_debug, "de4x5 debug mask");
1025 MODULE_PARM_DESC(dec_only, "de4x5 probe only for Digital boards (0-1)");
1026 MODULE_PARM_DESC(args, "de4x5 full duplex and media type settings; see de4x5.c for details");
1027 MODULE_LICENSE("GPL");
1028
1029 /*
1030 ** List the SROM infoleaf functions and chipsets
1031 */
1032 struct InfoLeaf {
1033 int chipset;
1034 int (*fn)(struct net_device *);
1035 };
1036 static struct InfoLeaf infoleaf_array[] = {
1037 {DC21041, dc21041_infoleaf},
1038 {DC21140, dc21140_infoleaf},
1039 {DC21142, dc21142_infoleaf},
1040 {DC21143, dc21143_infoleaf}
1041 };
1042 #define INFOLEAF_SIZE ARRAY_SIZE(infoleaf_array)
1043
1044 /*
1045 ** List the SROM info block functions
1046 */
1047 static int (*dc_infoblock[])(struct net_device *dev, u_char, u_char *) = {
1048 type0_infoblock,
1049 type1_infoblock,
1050 type2_infoblock,
1051 type3_infoblock,
1052 type4_infoblock,
1053 type5_infoblock,
1054 compact_infoblock
1055 };
1056
1057 #define COMPACT (ARRAY_SIZE(dc_infoblock) - 1)
1058
1059 /*
1060 ** Miscellaneous defines...
1061 */
1062 #define RESET_DE4X5 {\
1063 int i;\
1064 i=inl(DE4X5_BMR);\
1065 mdelay(1);\
1066 outl(i | BMR_SWR, DE4X5_BMR);\
1067 mdelay(1);\
1068 outl(i, DE4X5_BMR);\
1069 mdelay(1);\
1070 for (i=0;i<5;i++) {inl(DE4X5_BMR); mdelay(1);}\
1071 mdelay(1);\
1072 }
1073
1074 #define PHY_HARD_RESET {\
1075 outl(GEP_HRST, DE4X5_GEP); /* Hard RESET the PHY dev. */\
1076 mdelay(1); /* Assert for 1ms */\
1077 outl(0x00, DE4X5_GEP);\
1078 mdelay(2); /* Wait for 2ms */\
1079 }
1080
1081
1082 static int __devinit
1083 de4x5_hw_init(struct net_device *dev, u_long iobase, struct device *gendev)
1084 {
1085 char name[DE4X5_NAME_LENGTH + 1];
1086 struct de4x5_private *lp = netdev_priv(dev);
1087 struct pci_dev *pdev = NULL;
1088 int i, status=0;
1089 DECLARE_MAC_BUF(mac);
1090
1091 gendev->driver_data = dev;
1092
1093 /* Ensure we're not sleeping */
1094 if (lp->bus == EISA) {
1095 outb(WAKEUP, PCI_CFPM);
1096 } else {
1097 pdev = to_pci_dev (gendev);
1098 pci_write_config_byte(pdev, PCI_CFDA_PSM, WAKEUP);
1099 }
1100 mdelay(10);
1101
1102 RESET_DE4X5;
1103
1104 if ((inl(DE4X5_STS) & (STS_TS | STS_RS)) != 0) {
1105 return -ENXIO; /* Hardware could not reset */
1106 }
1107
1108 /*
1109 ** Now find out what kind of DC21040/DC21041/DC21140 board we have.
1110 */
1111 lp->useSROM = false;
1112 if (lp->bus == PCI) {
1113 PCI_signature(name, lp);
1114 } else {
1115 EISA_signature(name, gendev);
1116 }
1117
1118 if (*name == '\0') { /* Not found a board signature */
1119 return -ENXIO;
1120 }
1121
1122 dev->base_addr = iobase;
1123 printk ("%s: %s at 0x%04lx", gendev->bus_id, name, iobase);
1124
1125 status = get_hw_addr(dev);
1126 printk(", h/w address %s\n", print_mac(mac, dev->dev_addr));
1127
1128 if (status != 0) {
1129 printk(" which has an Ethernet PROM CRC error.\n");
1130 return -ENXIO;
1131 } else {
1132 lp->cache.gepc = GEP_INIT;
1133 lp->asBit = GEP_SLNK;
1134 lp->asPolarity = GEP_SLNK;
1135 lp->asBitValid = ~0;
1136 lp->timeout = -1;
1137 lp->gendev = gendev;
1138 spin_lock_init(&lp->lock);
1139 init_timer(&lp->timer);
1140 lp->timer.function = (void (*)(unsigned long))de4x5_ast;
1141 lp->timer.data = (unsigned long)dev;
1142 de4x5_parse_params(dev);
1143
1144 /*
1145 ** Choose correct autosensing in case someone messed up
1146 */
1147 lp->autosense = lp->params.autosense;
1148 if (lp->chipset != DC21140) {
1149 if ((lp->chipset==DC21040) && (lp->params.autosense&TP_NW)) {
1150 lp->params.autosense = TP;
1151 }
1152 if ((lp->chipset==DC21041) && (lp->params.autosense&BNC_AUI)) {
1153 lp->params.autosense = BNC;
1154 }
1155 }
1156 lp->fdx = lp->params.fdx;
1157 sprintf(lp->adapter_name,"%s (%s)", name, gendev->bus_id);
1158
1159 lp->dma_size = (NUM_RX_DESC + NUM_TX_DESC) * sizeof(struct de4x5_desc);
1160 #if defined(__alpha__) || defined(__powerpc__) || defined(CONFIG_SPARC) || defined(DE4X5_DO_MEMCPY)
1161 lp->dma_size += RX_BUFF_SZ * NUM_RX_DESC + DE4X5_ALIGN;
1162 #endif
1163 lp->rx_ring = dma_alloc_coherent(gendev, lp->dma_size,
1164 &lp->dma_rings, GFP_ATOMIC);
1165 if (lp->rx_ring == NULL) {
1166 return -ENOMEM;
1167 }
1168
1169 lp->tx_ring = lp->rx_ring + NUM_RX_DESC;
1170
1171 /*
1172 ** Set up the RX descriptor ring (Intels)
1173 ** Allocate contiguous receive buffers, long word aligned (Alphas)
1174 */
1175 #if !defined(__alpha__) && !defined(__powerpc__) && !defined(CONFIG_SPARC) && !defined(DE4X5_DO_MEMCPY)
1176 for (i=0; i<NUM_RX_DESC; i++) {
1177 lp->rx_ring[i].status = 0;
1178 lp->rx_ring[i].des1 = cpu_to_le32(RX_BUFF_SZ);
1179 lp->rx_ring[i].buf = 0;
1180 lp->rx_ring[i].next = 0;
1181 lp->rx_skb[i] = (struct sk_buff *) 1; /* Dummy entry */
1182 }
1183
1184 #else
1185 {
1186 dma_addr_t dma_rx_bufs;
1187
1188 dma_rx_bufs = lp->dma_rings + (NUM_RX_DESC + NUM_TX_DESC)
1189 * sizeof(struct de4x5_desc);
1190 dma_rx_bufs = (dma_rx_bufs + DE4X5_ALIGN) & ~DE4X5_ALIGN;
1191 lp->rx_bufs = (char *)(((long)(lp->rx_ring + NUM_RX_DESC
1192 + NUM_TX_DESC) + DE4X5_ALIGN) & ~DE4X5_ALIGN);
1193 for (i=0; i<NUM_RX_DESC; i++) {
1194 lp->rx_ring[i].status = 0;
1195 lp->rx_ring[i].des1 = cpu_to_le32(RX_BUFF_SZ);
1196 lp->rx_ring[i].buf =
1197 cpu_to_le32(dma_rx_bufs+i*RX_BUFF_SZ);
1198 lp->rx_ring[i].next = 0;
1199 lp->rx_skb[i] = (struct sk_buff *) 1; /* Dummy entry */
1200 }
1201
1202 }
1203 #endif
1204
1205 barrier();
1206
1207 lp->rxRingSize = NUM_RX_DESC;
1208 lp->txRingSize = NUM_TX_DESC;
1209
1210 /* Write the end of list marker to the descriptor lists */
1211 lp->rx_ring[lp->rxRingSize - 1].des1 |= cpu_to_le32(RD_RER);
1212 lp->tx_ring[lp->txRingSize - 1].des1 |= cpu_to_le32(TD_TER);
1213
1214 /* Tell the adapter where the TX/RX rings are located. */
1215 outl(lp->dma_rings, DE4X5_RRBA);
1216 outl(lp->dma_rings + NUM_RX_DESC * sizeof(struct de4x5_desc),
1217 DE4X5_TRBA);
1218
1219 /* Initialise the IRQ mask and Enable/Disable */
1220 lp->irq_mask = IMR_RIM | IMR_TIM | IMR_TUM | IMR_UNM;
1221 lp->irq_en = IMR_NIM | IMR_AIM;
1222
1223 /* Create a loopback packet frame for later media probing */
1224 create_packet(dev, lp->frame, sizeof(lp->frame));
1225
1226 /* Check if the RX overflow bug needs testing for */
1227 i = lp->cfrv & 0x000000fe;
1228 if ((lp->chipset == DC21140) && (i == 0x20)) {
1229 lp->rx_ovf = 1;
1230 }
1231
1232 /* Initialise the SROM pointers if possible */
1233 if (lp->useSROM) {
1234 lp->state = INITIALISED;
1235 if (srom_infoleaf_info(dev)) {
1236 dma_free_coherent (gendev, lp->dma_size,
1237 lp->rx_ring, lp->dma_rings);
1238 return -ENXIO;
1239 }
1240 srom_init(dev);
1241 }
1242
1243 lp->state = CLOSED;
1244
1245 /*
1246 ** Check for an MII interface
1247 */
1248 if ((lp->chipset != DC21040) && (lp->chipset != DC21041)) {
1249 mii_get_phy(dev);
1250 }
1251
1252 printk(" and requires IRQ%d (provided by %s).\n", dev->irq,
1253 ((lp->bus == PCI) ? "PCI BIOS" : "EISA CNFG"));
1254 }
1255
1256 if (de4x5_debug & DEBUG_VERSION) {
1257 printk(version);
1258 }
1259
1260 /* The DE4X5-specific entries in the device structure. */
1261 SET_NETDEV_DEV(dev, gendev);
1262 dev->open = &de4x5_open;
1263 dev->hard_start_xmit = &de4x5_queue_pkt;
1264 dev->stop = &de4x5_close;
1265 dev->get_stats = &de4x5_get_stats;
1266 dev->set_multicast_list = &set_multicast_list;
1267 dev->do_ioctl = &de4x5_ioctl;
1268
1269 dev->mem_start = 0;
1270
1271 /* Fill in the generic fields of the device structure. */
1272 if ((status = register_netdev (dev))) {
1273 dma_free_coherent (gendev, lp->dma_size,
1274 lp->rx_ring, lp->dma_rings);
1275 return status;
1276 }
1277
1278 /* Let the adapter sleep to save power */
1279 yawn(dev, SLEEP);
1280
1281 return status;
1282 }
1283
1284
1285 static int
1286 de4x5_open(struct net_device *dev)
1287 {
1288 struct de4x5_private *lp = netdev_priv(dev);
1289 u_long iobase = dev->base_addr;
1290 int i, status = 0;
1291 s32 omr;
1292
1293 /* Allocate the RX buffers */
1294 for (i=0; i<lp->rxRingSize; i++) {
1295 if (de4x5_alloc_rx_buff(dev, i, 0) == NULL) {
1296 de4x5_free_rx_buffs(dev);
1297 return -EAGAIN;
1298 }
1299 }
1300
1301 /*
1302 ** Wake up the adapter
1303 */
1304 yawn(dev, WAKEUP);
1305
1306 /*
1307 ** Re-initialize the DE4X5...
1308 */
1309 status = de4x5_init(dev);
1310 spin_lock_init(&lp->lock);
1311 lp->state = OPEN;
1312 de4x5_dbg_open(dev);
1313
1314 if (request_irq(dev->irq, de4x5_interrupt, IRQF_SHARED,
1315 lp->adapter_name, dev)) {
1316 printk("de4x5_open(): Requested IRQ%d is busy - attemping FAST/SHARE...", dev->irq);
1317 if (request_irq(dev->irq, de4x5_interrupt, IRQF_DISABLED | IRQF_SHARED,
1318 lp->adapter_name, dev)) {
1319 printk("\n Cannot get IRQ- reconfigure your hardware.\n");
1320 disable_ast(dev);
1321 de4x5_free_rx_buffs(dev);
1322 de4x5_free_tx_buffs(dev);
1323 yawn(dev, SLEEP);
1324 lp->state = CLOSED;
1325 return -EAGAIN;
1326 } else {
1327 printk("\n Succeeded, but you should reconfigure your hardware to avoid this.\n");
1328 printk("WARNING: there may be IRQ related problems in heavily loaded systems.\n");
1329 }
1330 }
1331
1332 lp->interrupt = UNMASK_INTERRUPTS;
1333 dev->trans_start = jiffies;
1334
1335 START_DE4X5;
1336
1337 de4x5_setup_intr(dev);
1338
1339 if (de4x5_debug & DEBUG_OPEN) {
1340 printk("\tsts: 0x%08x\n", inl(DE4X5_STS));
1341 printk("\tbmr: 0x%08x\n", inl(DE4X5_BMR));
1342 printk("\timr: 0x%08x\n", inl(DE4X5_IMR));
1343 printk("\tomr: 0x%08x\n", inl(DE4X5_OMR));
1344 printk("\tsisr: 0x%08x\n", inl(DE4X5_SISR));
1345 printk("\tsicr: 0x%08x\n", inl(DE4X5_SICR));
1346 printk("\tstrr: 0x%08x\n", inl(DE4X5_STRR));
1347 printk("\tsigr: 0x%08x\n", inl(DE4X5_SIGR));
1348 }
1349
1350 return status;
1351 }
1352
1353 /*
1354 ** Initialize the DE4X5 operating conditions. NB: a chip problem with the
1355 ** DC21140 requires using perfect filtering mode for that chip. Since I can't
1356 ** see why I'd want > 14 multicast addresses, I have changed all chips to use
1357 ** the perfect filtering mode. Keep the DMA burst length at 8: there seems
1358 ** to be data corruption problems if it is larger (UDP errors seen from a
1359 ** ttcp source).
1360 */
1361 static int
1362 de4x5_init(struct net_device *dev)
1363 {
1364 /* Lock out other processes whilst setting up the hardware */
1365 netif_stop_queue(dev);
1366
1367 de4x5_sw_reset(dev);
1368
1369 /* Autoconfigure the connected port */
1370 autoconf_media(dev);
1371
1372 return 0;
1373 }
1374
1375 static int
1376 de4x5_sw_reset(struct net_device *dev)
1377 {
1378 struct de4x5_private *lp = netdev_priv(dev);
1379 u_long iobase = dev->base_addr;
1380 int i, j, status = 0;
1381 s32 bmr, omr;
1382
1383 /* Select the MII or SRL port now and RESET the MAC */
1384 if (!lp->useSROM) {
1385 if (lp->phy[lp->active].id != 0) {
1386 lp->infoblock_csr6 = OMR_SDP | OMR_PS | OMR_HBD;
1387 } else {
1388 lp->infoblock_csr6 = OMR_SDP | OMR_TTM;
1389 }
1390 de4x5_switch_mac_port(dev);
1391 }
1392
1393 /*
1394 ** Set the programmable burst length to 8 longwords for all the DC21140
1395 ** Fasternet chips and 4 longwords for all others: DMA errors result
1396 ** without these values. Cache align 16 long.
1397 */
1398 bmr = (lp->chipset==DC21140 ? PBL_8 : PBL_4) | DESC_SKIP_LEN | DE4X5_CACHE_ALIGN;
1399 bmr |= ((lp->chipset & ~0x00ff)==DC2114x ? BMR_RML : 0);
1400 outl(bmr, DE4X5_BMR);
1401
1402 omr = inl(DE4X5_OMR) & ~OMR_PR; /* Turn off promiscuous mode */
1403 if (lp->chipset == DC21140) {
1404 omr |= (OMR_SDP | OMR_SB);
1405 }
1406 lp->setup_f = PERFECT;
1407 outl(lp->dma_rings, DE4X5_RRBA);
1408 outl(lp->dma_rings + NUM_RX_DESC * sizeof(struct de4x5_desc),
1409 DE4X5_TRBA);
1410
1411 lp->rx_new = lp->rx_old = 0;
1412 lp->tx_new = lp->tx_old = 0;
1413
1414 for (i = 0; i < lp->rxRingSize; i++) {
1415 lp->rx_ring[i].status = cpu_to_le32(R_OWN);
1416 }
1417
1418 for (i = 0; i < lp->txRingSize; i++) {
1419 lp->tx_ring[i].status = cpu_to_le32(0);
1420 }
1421
1422 barrier();
1423
1424 /* Build the setup frame depending on filtering mode */
1425 SetMulticastFilter(dev);
1426
1427 load_packet(dev, lp->setup_frame, PERFECT_F|TD_SET|SETUP_FRAME_LEN, (struct sk_buff *)1);
1428 outl(omr|OMR_ST, DE4X5_OMR);
1429
1430 /* Poll for setup frame completion (adapter interrupts are disabled now) */
1431
1432 for (j=0, i=0;(i<500) && (j==0);i++) { /* Upto 500ms delay */
1433 mdelay(1);
1434 if ((s32)le32_to_cpu(lp->tx_ring[lp->tx_new].status) >= 0) j=1;
1435 }
1436 outl(omr, DE4X5_OMR); /* Stop everything! */
1437
1438 if (j == 0) {
1439 printk("%s: Setup frame timed out, status %08x\n", dev->name,
1440 inl(DE4X5_STS));
1441 status = -EIO;
1442 }
1443
1444 lp->tx_new = (++lp->tx_new) % lp->txRingSize;
1445 lp->tx_old = lp->tx_new;
1446
1447 return status;
1448 }
1449
1450 /*
1451 ** Writes a socket buffer address to the next available transmit descriptor.
1452 */
1453 static int
1454 de4x5_queue_pkt(struct sk_buff *skb, struct net_device *dev)
1455 {
1456 struct de4x5_private *lp = netdev_priv(dev);
1457 u_long iobase = dev->base_addr;
1458 int status = 0;
1459 u_long flags = 0;
1460
1461 netif_stop_queue(dev);
1462 if (!lp->tx_enable) { /* Cannot send for now */
1463 return -1;
1464 }
1465
1466 /*
1467 ** Clean out the TX ring asynchronously to interrupts - sometimes the
1468 ** interrupts are lost by delayed descriptor status updates relative to
1469 ** the irq assertion, especially with a busy PCI bus.
1470 */
1471 spin_lock_irqsave(&lp->lock, flags);
1472 de4x5_tx(dev);
1473 spin_unlock_irqrestore(&lp->lock, flags);
1474
1475 /* Test if cache is already locked - requeue skb if so */
1476 if (test_and_set_bit(0, (void *)&lp->cache.lock) && !lp->interrupt)
1477 return -1;
1478
1479 /* Transmit descriptor ring full or stale skb */
1480 if (netif_queue_stopped(dev) || (u_long) lp->tx_skb[lp->tx_new] > 1) {
1481 if (lp->interrupt) {
1482 de4x5_putb_cache(dev, skb); /* Requeue the buffer */
1483 } else {
1484 de4x5_put_cache(dev, skb);
1485 }
1486 if (de4x5_debug & DEBUG_TX) {
1487 printk("%s: transmit busy, lost media or stale skb found:\n STS:%08x\n tbusy:%d\n IMR:%08x\n OMR:%08x\n Stale skb: %s\n",dev->name, inl(DE4X5_STS), netif_queue_stopped(dev), inl(DE4X5_IMR), inl(DE4X5_OMR), ((u_long) lp->tx_skb[lp->tx_new] > 1) ? "YES" : "NO");
1488 }
1489 } else if (skb->len > 0) {
1490 /* If we already have stuff queued locally, use that first */
1491 if (lp->cache.skb && !lp->interrupt) {
1492 de4x5_put_cache(dev, skb);
1493 skb = de4x5_get_cache(dev);
1494 }
1495
1496 while (skb && !netif_queue_stopped(dev) &&
1497 (u_long) lp->tx_skb[lp->tx_new] <= 1) {
1498 spin_lock_irqsave(&lp->lock, flags);
1499 netif_stop_queue(dev);
1500 load_packet(dev, skb->data, TD_IC | TD_LS | TD_FS | skb->len, skb);
1501 lp->stats.tx_bytes += skb->len;
1502 outl(POLL_DEMAND, DE4X5_TPD);/* Start the TX */
1503
1504 lp->tx_new = (++lp->tx_new) % lp->txRingSize;
1505 dev->trans_start = jiffies;
1506
1507 if (TX_BUFFS_AVAIL) {
1508 netif_start_queue(dev); /* Another pkt may be queued */
1509 }
1510 skb = de4x5_get_cache(dev);
1511 spin_unlock_irqrestore(&lp->lock, flags);
1512 }
1513 if (skb) de4x5_putb_cache(dev, skb);
1514 }
1515
1516 lp->cache.lock = 0;
1517
1518 return status;
1519 }
1520
1521 /*
1522 ** The DE4X5 interrupt handler.
1523 **
1524 ** I/O Read/Writes through intermediate PCI bridges are never 'posted',
1525 ** so that the asserted interrupt always has some real data to work with -
1526 ** if these I/O accesses are ever changed to memory accesses, ensure the
1527 ** STS write is read immediately to complete the transaction if the adapter
1528 ** is not on bus 0. Lost interrupts can still occur when the PCI bus load
1529 ** is high and descriptor status bits cannot be set before the associated
1530 ** interrupt is asserted and this routine entered.
1531 */
1532 static irqreturn_t
1533 de4x5_interrupt(int irq, void *dev_id)
1534 {
1535 struct net_device *dev = dev_id;
1536 struct de4x5_private *lp;
1537 s32 imr, omr, sts, limit;
1538 u_long iobase;
1539 unsigned int handled = 0;
1540
1541 lp = netdev_priv(dev);
1542 spin_lock(&lp->lock);
1543 iobase = dev->base_addr;
1544
1545 DISABLE_IRQs; /* Ensure non re-entrancy */
1546
1547 if (test_and_set_bit(MASK_INTERRUPTS, (void*) &lp->interrupt))
1548 printk("%s: Re-entering the interrupt handler.\n", dev->name);
1549
1550 synchronize_irq(dev->irq);
1551
1552 for (limit=0; limit<8; limit++) {
1553 sts = inl(DE4X5_STS); /* Read IRQ status */
1554 outl(sts, DE4X5_STS); /* Reset the board interrupts */
1555
1556 if (!(sts & lp->irq_mask)) break;/* All done */
1557 handled = 1;
1558
1559 if (sts & (STS_RI | STS_RU)) /* Rx interrupt (packet[s] arrived) */
1560 de4x5_rx(dev);
1561
1562 if (sts & (STS_TI | STS_TU)) /* Tx interrupt (packet sent) */
1563 de4x5_tx(dev);
1564
1565 if (sts & STS_LNF) { /* TP Link has failed */
1566 lp->irq_mask &= ~IMR_LFM;
1567 }
1568
1569 if (sts & STS_UNF) { /* Transmit underrun */
1570 de4x5_txur(dev);
1571 }
1572
1573 if (sts & STS_SE) { /* Bus Error */
1574 STOP_DE4X5;
1575 printk("%s: Fatal bus error occurred, sts=%#8x, device stopped.\n",
1576 dev->name, sts);
1577 spin_unlock(&lp->lock);
1578 return IRQ_HANDLED;
1579 }
1580 }
1581
1582 /* Load the TX ring with any locally stored packets */
1583 if (!test_and_set_bit(0, (void *)&lp->cache.lock)) {
1584 while (lp->cache.skb && !netif_queue_stopped(dev) && lp->tx_enable) {
1585 de4x5_queue_pkt(de4x5_get_cache(dev), dev);
1586 }
1587 lp->cache.lock = 0;
1588 }
1589
1590 lp->interrupt = UNMASK_INTERRUPTS;
1591 ENABLE_IRQs;
1592 spin_unlock(&lp->lock);
1593
1594 return IRQ_RETVAL(handled);
1595 }
1596
1597 static int
1598 de4x5_rx(struct net_device *dev)
1599 {
1600 struct de4x5_private *lp = netdev_priv(dev);
1601 u_long iobase = dev->base_addr;
1602 int entry;
1603 s32 status;
1604
1605 for (entry=lp->rx_new; (s32)le32_to_cpu(lp->rx_ring[entry].status)>=0;
1606 entry=lp->rx_new) {
1607 status = (s32)le32_to_cpu(lp->rx_ring[entry].status);
1608
1609 if (lp->rx_ovf) {
1610 if (inl(DE4X5_MFC) & MFC_FOCM) {
1611 de4x5_rx_ovfc(dev);
1612 break;
1613 }
1614 }
1615
1616 if (status & RD_FS) { /* Remember the start of frame */
1617 lp->rx_old = entry;
1618 }
1619
1620 if (status & RD_LS) { /* Valid frame status */
1621 if (lp->tx_enable) lp->linkOK++;
1622 if (status & RD_ES) { /* There was an error. */
1623 lp->stats.rx_errors++; /* Update the error stats. */
1624 if (status & (RD_RF | RD_TL)) lp->stats.rx_frame_errors++;
1625 if (status & RD_CE) lp->stats.rx_crc_errors++;
1626 if (status & RD_OF) lp->stats.rx_fifo_errors++;
1627 if (status & RD_TL) lp->stats.rx_length_errors++;
1628 if (status & RD_RF) lp->pktStats.rx_runt_frames++;
1629 if (status & RD_CS) lp->pktStats.rx_collision++;
1630 if (status & RD_DB) lp->pktStats.rx_dribble++;
1631 if (status & RD_OF) lp->pktStats.rx_overflow++;
1632 } else { /* A valid frame received */
1633 struct sk_buff *skb;
1634 short pkt_len = (short)(le32_to_cpu(lp->rx_ring[entry].status)
1635 >> 16) - 4;
1636
1637 if ((skb = de4x5_alloc_rx_buff(dev, entry, pkt_len)) == NULL) {
1638 printk("%s: Insufficient memory; nuking packet.\n",
1639 dev->name);
1640 lp->stats.rx_dropped++;
1641 } else {
1642 de4x5_dbg_rx(skb, pkt_len);
1643
1644 /* Push up the protocol stack */
1645 skb->protocol=eth_type_trans(skb,dev);
1646 de4x5_local_stats(dev, skb->data, pkt_len);
1647 netif_rx(skb);
1648
1649 /* Update stats */
1650 dev->last_rx = jiffies;
1651 lp->stats.rx_packets++;
1652 lp->stats.rx_bytes += pkt_len;
1653 }
1654 }
1655
1656 /* Change buffer ownership for this frame, back to the adapter */
1657 for (;lp->rx_old!=entry;lp->rx_old=(++lp->rx_old)%lp->rxRingSize) {
1658 lp->rx_ring[lp->rx_old].status = cpu_to_le32(R_OWN);
1659 barrier();
1660 }
1661 lp->rx_ring[entry].status = cpu_to_le32(R_OWN);
1662 barrier();
1663 }
1664
1665 /*
1666 ** Update entry information
1667 */
1668 lp->rx_new = (++lp->rx_new) % lp->rxRingSize;
1669 }
1670
1671 return 0;
1672 }
1673
1674 static inline void
1675 de4x5_free_tx_buff(struct de4x5_private *lp, int entry)
1676 {
1677 dma_unmap_single(lp->gendev, le32_to_cpu(lp->tx_ring[entry].buf),
1678 le32_to_cpu(lp->tx_ring[entry].des1) & TD_TBS1,
1679 DMA_TO_DEVICE);
1680 if ((u_long) lp->tx_skb[entry] > 1)
1681 dev_kfree_skb_irq(lp->tx_skb[entry]);
1682 lp->tx_skb[entry] = NULL;
1683 }
1684
1685 /*
1686 ** Buffer sent - check for TX buffer errors.
1687 */
1688 static int
1689 de4x5_tx(struct net_device *dev)
1690 {
1691 struct de4x5_private *lp = netdev_priv(dev);
1692 u_long iobase = dev->base_addr;
1693 int entry;
1694 s32 status;
1695
1696 for (entry = lp->tx_old; entry != lp->tx_new; entry = lp->tx_old) {
1697 status = (s32)le32_to_cpu(lp->tx_ring[entry].status);
1698 if (status < 0) { /* Buffer not sent yet */
1699 break;
1700 } else if (status != 0x7fffffff) { /* Not setup frame */
1701 if (status & TD_ES) { /* An error happened */
1702 lp->stats.tx_errors++;
1703 if (status & TD_NC) lp->stats.tx_carrier_errors++;
1704 if (status & TD_LC) lp->stats.tx_window_errors++;
1705 if (status & TD_UF) lp->stats.tx_fifo_errors++;
1706 if (status & TD_EC) lp->pktStats.excessive_collisions++;
1707 if (status & TD_DE) lp->stats.tx_aborted_errors++;
1708
1709 if (TX_PKT_PENDING) {
1710 outl(POLL_DEMAND, DE4X5_TPD);/* Restart a stalled TX */
1711 }
1712 } else { /* Packet sent */
1713 lp->stats.tx_packets++;
1714 if (lp->tx_enable) lp->linkOK++;
1715 }
1716 /* Update the collision counter */
1717 lp->stats.collisions += ((status & TD_EC) ? 16 :
1718 ((status & TD_CC) >> 3));
1719
1720 /* Free the buffer. */
1721 if (lp->tx_skb[entry] != NULL)
1722 de4x5_free_tx_buff(lp, entry);
1723 }
1724
1725 /* Update all the pointers */
1726 lp->tx_old = (++lp->tx_old) % lp->txRingSize;
1727 }
1728
1729 /* Any resources available? */
1730 if (TX_BUFFS_AVAIL && netif_queue_stopped(dev)) {
1731 if (lp->interrupt)
1732 netif_wake_queue(dev);
1733 else
1734 netif_start_queue(dev);
1735 }
1736
1737 return 0;
1738 }
1739
1740 static void
1741 de4x5_ast(struct net_device *dev)
1742 {
1743 struct de4x5_private *lp = netdev_priv(dev);
1744 int next_tick = DE4X5_AUTOSENSE_MS;
1745 int dt;
1746
1747 if (lp->useSROM)
1748 next_tick = srom_autoconf(dev);
1749 else if (lp->chipset == DC21140)
1750 next_tick = dc21140m_autoconf(dev);
1751 else if (lp->chipset == DC21041)
1752 next_tick = dc21041_autoconf(dev);
1753 else if (lp->chipset == DC21040)
1754 next_tick = dc21040_autoconf(dev);
1755 lp->linkOK = 0;
1756
1757 dt = (next_tick * HZ) / 1000;
1758
1759 if (!dt)
1760 dt = 1;
1761
1762 mod_timer(&lp->timer, jiffies + dt);
1763 }
1764
1765 static int
1766 de4x5_txur(struct net_device *dev)
1767 {
1768 struct de4x5_private *lp = netdev_priv(dev);
1769 u_long iobase = dev->base_addr;
1770 int omr;
1771
1772 omr = inl(DE4X5_OMR);
1773 if (!(omr & OMR_SF) || (lp->chipset==DC21041) || (lp->chipset==DC21040)) {
1774 omr &= ~(OMR_ST|OMR_SR);
1775 outl(omr, DE4X5_OMR);
1776 while (inl(DE4X5_STS) & STS_TS);
1777 if ((omr & OMR_TR) < OMR_TR) {
1778 omr += 0x4000;
1779 } else {
1780 omr |= OMR_SF;
1781 }
1782 outl(omr | OMR_ST | OMR_SR, DE4X5_OMR);
1783 }
1784
1785 return 0;
1786 }
1787
1788 static int
1789 de4x5_rx_ovfc(struct net_device *dev)
1790 {
1791 struct de4x5_private *lp = netdev_priv(dev);
1792 u_long iobase = dev->base_addr;
1793 int omr;
1794
1795 omr = inl(DE4X5_OMR);
1796 outl(omr & ~OMR_SR, DE4X5_OMR);
1797 while (inl(DE4X5_STS) & STS_RS);
1798
1799 for (; (s32)le32_to_cpu(lp->rx_ring[lp->rx_new].status)>=0;) {
1800 lp->rx_ring[lp->rx_new].status = cpu_to_le32(R_OWN);
1801 lp->rx_new = (++lp->rx_new % lp->rxRingSize);
1802 }
1803
1804 outl(omr, DE4X5_OMR);
1805
1806 return 0;
1807 }
1808
1809 static int
1810 de4x5_close(struct net_device *dev)
1811 {
1812 struct de4x5_private *lp = netdev_priv(dev);
1813 u_long iobase = dev->base_addr;
1814 s32 imr, omr;
1815
1816 disable_ast(dev);
1817
1818 netif_stop_queue(dev);
1819
1820 if (de4x5_debug & DEBUG_CLOSE) {
1821 printk("%s: Shutting down ethercard, status was %8.8x.\n",
1822 dev->name, inl(DE4X5_STS));
1823 }
1824
1825 /*
1826 ** We stop the DE4X5 here... mask interrupts and stop TX & RX
1827 */
1828 DISABLE_IRQs;
1829 STOP_DE4X5;
1830
1831 /* Free the associated irq */
1832 free_irq(dev->irq, dev);
1833 lp->state = CLOSED;
1834
1835 /* Free any socket buffers */
1836 de4x5_free_rx_buffs(dev);
1837 de4x5_free_tx_buffs(dev);
1838
1839 /* Put the adapter to sleep to save power */
1840 yawn(dev, SLEEP);
1841
1842 return 0;
1843 }
1844
1845 static struct net_device_stats *
1846 de4x5_get_stats(struct net_device *dev)
1847 {
1848 struct de4x5_private *lp = netdev_priv(dev);
1849 u_long iobase = dev->base_addr;
1850
1851 lp->stats.rx_missed_errors = (int)(inl(DE4X5_MFC) & (MFC_OVFL | MFC_CNTR));
1852
1853 return &lp->stats;
1854 }
1855
1856 static void
1857 de4x5_local_stats(struct net_device *dev, char *buf, int pkt_len)
1858 {
1859 struct de4x5_private *lp = netdev_priv(dev);
1860 int i;
1861
1862 for (i=1; i<DE4X5_PKT_STAT_SZ-1; i++) {
1863 if (pkt_len < (i*DE4X5_PKT_BIN_SZ)) {
1864 lp->pktStats.bins[i]++;
1865 i = DE4X5_PKT_STAT_SZ;
1866 }
1867 }
1868 if (buf[0] & 0x01) { /* Multicast/Broadcast */
1869 if ((*(s32 *)&buf[0] == -1) && (*(s16 *)&buf[4] == -1)) {
1870 lp->pktStats.broadcast++;
1871 } else {
1872 lp->pktStats.multicast++;
1873 }
1874 } else if ((*(s32 *)&buf[0] == *(s32 *)&dev->dev_addr[0]) &&
1875 (*(s16 *)&buf[4] == *(s16 *)&dev->dev_addr[4])) {
1876 lp->pktStats.unicast++;
1877 }
1878
1879 lp->pktStats.bins[0]++; /* Duplicates stats.rx_packets */
1880 if (lp->pktStats.bins[0] == 0) { /* Reset counters */
1881 memset((char *)&lp->pktStats, 0, sizeof(lp->pktStats));
1882 }
1883
1884 return;
1885 }
1886
1887 /*
1888 ** Removes the TD_IC flag from previous descriptor to improve TX performance.
1889 ** If the flag is changed on a descriptor that is being read by the hardware,
1890 ** I assume PCI transaction ordering will mean you are either successful or
1891 ** just miss asserting the change to the hardware. Anyway you're messing with
1892 ** a descriptor you don't own, but this shouldn't kill the chip provided
1893 ** the descriptor register is read only to the hardware.
1894 */
1895 static void
1896 load_packet(struct net_device *dev, char *buf, u32 flags, struct sk_buff *skb)
1897 {
1898 struct de4x5_private *lp = netdev_priv(dev);
1899 int entry = (lp->tx_new ? lp->tx_new-1 : lp->txRingSize-1);
1900 dma_addr_t buf_dma = dma_map_single(lp->gendev, buf, flags & TD_TBS1, DMA_TO_DEVICE);
1901
1902 lp->tx_ring[lp->tx_new].buf = cpu_to_le32(buf_dma);
1903 lp->tx_ring[lp->tx_new].des1 &= cpu_to_le32(TD_TER);
1904 lp->tx_ring[lp->tx_new].des1 |= cpu_to_le32(flags);
1905 lp->tx_skb[lp->tx_new] = skb;
1906 lp->tx_ring[entry].des1 &= cpu_to_le32(~TD_IC);
1907 barrier();
1908
1909 lp->tx_ring[lp->tx_new].status = cpu_to_le32(T_OWN);
1910 barrier();
1911 }
1912
1913 /*
1914 ** Set or clear the multicast filter for this adaptor.
1915 */
1916 static void
1917 set_multicast_list(struct net_device *dev)
1918 {
1919 struct de4x5_private *lp = netdev_priv(dev);
1920 u_long iobase = dev->base_addr;
1921
1922 /* First, double check that the adapter is open */
1923 if (lp->state == OPEN) {
1924 if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */
1925 u32 omr;
1926 omr = inl(DE4X5_OMR);
1927 omr |= OMR_PR;
1928 outl(omr, DE4X5_OMR);
1929 } else {
1930 SetMulticastFilter(dev);
1931 load_packet(dev, lp->setup_frame, TD_IC | PERFECT_F | TD_SET |
1932 SETUP_FRAME_LEN, (struct sk_buff *)1);
1933
1934 lp->tx_new = (++lp->tx_new) % lp->txRingSize;
1935 outl(POLL_DEMAND, DE4X5_TPD); /* Start the TX */
1936 dev->trans_start = jiffies;
1937 }
1938 }
1939 }
1940
1941 /*
1942 ** Calculate the hash code and update the logical address filter
1943 ** from a list of ethernet multicast addresses.
1944 ** Little endian crc one liner from Matt Thomas, DEC.
1945 */
1946 static void
1947 SetMulticastFilter(struct net_device *dev)
1948 {
1949 struct de4x5_private *lp = netdev_priv(dev);
1950 struct dev_mc_list *dmi=dev->mc_list;
1951 u_long iobase = dev->base_addr;
1952 int i, j, bit, byte;
1953 u16 hashcode;
1954 u32 omr, crc;
1955 char *pa;
1956 unsigned char *addrs;
1957
1958 omr = inl(DE4X5_OMR);
1959 omr &= ~(OMR_PR | OMR_PM);
1960 pa = build_setup_frame(dev, ALL); /* Build the basic frame */
1961
1962 if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 14)) {
1963 omr |= OMR_PM; /* Pass all multicasts */
1964 } else if (lp->setup_f == HASH_PERF) { /* Hash Filtering */
1965 for (i=0;i<dev->mc_count;i++) { /* for each address in the list */
1966 addrs=dmi->dmi_addr;
1967 dmi=dmi->next;
1968 if ((*addrs & 0x01) == 1) { /* multicast address? */
1969 crc = ether_crc_le(ETH_ALEN, addrs);
1970 hashcode = crc & HASH_BITS; /* hashcode is 9 LSb of CRC */
1971
1972 byte = hashcode >> 3; /* bit[3-8] -> byte in filter */
1973 bit = 1 << (hashcode & 0x07);/* bit[0-2] -> bit in byte */
1974
1975 byte <<= 1; /* calc offset into setup frame */
1976 if (byte & 0x02) {
1977 byte -= 1;
1978 }
1979 lp->setup_frame[byte] |= bit;
1980 }
1981 }
1982 } else { /* Perfect filtering */
1983 for (j=0; j<dev->mc_count; j++) {
1984 addrs=dmi->dmi_addr;
1985 dmi=dmi->next;
1986 for (i=0; i<ETH_ALEN; i++) {
1987 *(pa + (i&1)) = *addrs++;
1988 if (i & 0x01) pa += 4;
1989 }
1990 }
1991 }
1992 outl(omr, DE4X5_OMR);
1993
1994 return;
1995 }
1996
1997 #ifdef CONFIG_EISA
1998
1999 static u_char de4x5_irq[] = EISA_ALLOWED_IRQ_LIST;
2000
2001 static int __init de4x5_eisa_probe (struct device *gendev)
2002 {
2003 struct eisa_device *edev;
2004 u_long iobase;
2005 u_char irq, regval;
2006 u_short vendor;
2007 u32 cfid;
2008 int status, device;
2009 struct net_device *dev;
2010 struct de4x5_private *lp;
2011
2012 edev = to_eisa_device (gendev);
2013 iobase = edev->base_addr;
2014
2015 if (!request_region (iobase, DE4X5_EISA_TOTAL_SIZE, "de4x5"))
2016 return -EBUSY;
2017
2018 if (!request_region (iobase + DE4X5_EISA_IO_PORTS,
2019 DE4X5_EISA_TOTAL_SIZE, "de4x5")) {
2020 status = -EBUSY;
2021 goto release_reg_1;
2022 }
2023
2024 if (!(dev = alloc_etherdev (sizeof (struct de4x5_private)))) {
2025 status = -ENOMEM;
2026 goto release_reg_2;
2027 }
2028 lp = netdev_priv(dev);
2029
2030 cfid = (u32) inl(PCI_CFID);
2031 lp->cfrv = (u_short) inl(PCI_CFRV);
2032 device = (cfid >> 8) & 0x00ffff00;
2033 vendor = (u_short) cfid;
2034
2035 /* Read the EISA Configuration Registers */
2036 regval = inb(EISA_REG0) & (ER0_INTL | ER0_INTT);
2037 #ifdef CONFIG_ALPHA
2038 /* Looks like the Jensen firmware (rev 2.2) doesn't really
2039 * care about the EISA configuration, and thus doesn't
2040 * configure the PLX bridge properly. Oh well... Simply mimic
2041 * the EISA config file to sort it out. */
2042
2043 /* EISA REG1: Assert DecChip 21040 HW Reset */
2044 outb (ER1_IAM | 1, EISA_REG1);
2045 mdelay (1);
2046
2047 /* EISA REG1: Deassert DecChip 21040 HW Reset */
2048 outb (ER1_IAM, EISA_REG1);
2049 mdelay (1);
2050
2051 /* EISA REG3: R/W Burst Transfer Enable */
2052 outb (ER3_BWE | ER3_BRE, EISA_REG3);
2053
2054 /* 32_bit slave/master, Preempt Time=23 bclks, Unlatched Interrupt */
2055 outb (ER0_BSW | ER0_BMW | ER0_EPT | regval, EISA_REG0);
2056 #endif
2057 irq = de4x5_irq[(regval >> 1) & 0x03];
2058
2059 if (is_DC2114x) {
2060 device = ((lp->cfrv & CFRV_RN) < DC2114x_BRK ? DC21142 : DC21143);
2061 }
2062 lp->chipset = device;
2063 lp->bus = EISA;
2064
2065 /* Write the PCI Configuration Registers */
2066 outl(PCI_COMMAND_IO | PCI_COMMAND_MASTER, PCI_CFCS);
2067 outl(0x00006000, PCI_CFLT);
2068 outl(iobase, PCI_CBIO);
2069
2070 DevicePresent(dev, EISA_APROM);
2071
2072 dev->irq = irq;
2073
2074 if (!(status = de4x5_hw_init (dev, iobase, gendev))) {
2075 return 0;
2076 }
2077
2078 free_netdev (dev);
2079 release_reg_2:
2080 release_region (iobase + DE4X5_EISA_IO_PORTS, DE4X5_EISA_TOTAL_SIZE);
2081 release_reg_1:
2082 release_region (iobase, DE4X5_EISA_TOTAL_SIZE);
2083
2084 return status;
2085 }
2086
2087 static int __devexit de4x5_eisa_remove (struct device *device)
2088 {
2089 struct net_device *dev;
2090 u_long iobase;
2091
2092 dev = device->driver_data;
2093 iobase = dev->base_addr;
2094
2095 unregister_netdev (dev);
2096 free_netdev (dev);
2097 release_region (iobase + DE4X5_EISA_IO_PORTS, DE4X5_EISA_TOTAL_SIZE);
2098 release_region (iobase, DE4X5_EISA_TOTAL_SIZE);
2099
2100 return 0;
2101 }
2102
2103 static struct eisa_device_id de4x5_eisa_ids[] = {
2104 { "DEC4250", 0 }, /* 0 is the board name index... */
2105 { "" }
2106 };
2107 MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids);
2108
2109 static struct eisa_driver de4x5_eisa_driver = {
2110 .id_table = de4x5_eisa_ids,
2111 .driver = {
2112 .name = "de4x5",
2113 .probe = de4x5_eisa_probe,
2114 .remove = __devexit_p (de4x5_eisa_remove),
2115 }
2116 };
2117 MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids);
2118 #endif
2119
2120 #ifdef CONFIG_PCI
2121
2122 /*
2123 ** This function searches the current bus (which is >0) for a DECchip with an
2124 ** SROM, so that in multiport cards that have one SROM shared between multiple
2125 ** DECchips, we can find the base SROM irrespective of the BIOS scan direction.
2126 ** For single port cards this is a time waster...
2127 */
2128 static void __devinit
2129 srom_search(struct net_device *dev, struct pci_dev *pdev)
2130 {
2131 u_char pb;
2132 u_short vendor, status;
2133 u_int irq = 0, device;
2134 u_long iobase = 0; /* Clear upper 32 bits in Alphas */
2135 int i, j;
2136 struct de4x5_private *lp = netdev_priv(dev);
2137 struct list_head *walk;
2138
2139 list_for_each(walk, &pdev->bus_list) {
2140 struct pci_dev *this_dev = pci_dev_b(walk);
2141
2142 /* Skip the pci_bus list entry */
2143 if (list_entry(walk, struct pci_bus, devices) == pdev->bus) continue;
2144
2145 vendor = this_dev->vendor;
2146 device = this_dev->device << 8;
2147 if (!(is_DC21040 || is_DC21041 || is_DC21140 || is_DC2114x)) continue;
2148
2149 /* Get the chip configuration revision register */
2150 pb = this_dev->bus->number;
2151
2152 /* Set the device number information */
2153 lp->device = PCI_SLOT(this_dev->devfn);
2154 lp->bus_num = pb;
2155
2156 /* Set the chipset information */
2157 if (is_DC2114x) {
2158 device = ((this_dev->revision & CFRV_RN) < DC2114x_BRK
2159 ? DC21142 : DC21143);
2160 }
2161 lp->chipset = device;
2162
2163 /* Get the board I/O address (64 bits on sparc64) */
2164 iobase = pci_resource_start(this_dev, 0);
2165
2166 /* Fetch the IRQ to be used */
2167 irq = this_dev->irq;
2168 if ((irq == 0) || (irq == 0xff) || ((int)irq == -1)) continue;
2169
2170 /* Check if I/O accesses are enabled */
2171 pci_read_config_word(this_dev, PCI_COMMAND, &status);
2172 if (!(status & PCI_COMMAND_IO)) continue;
2173
2174 /* Search for a valid SROM attached to this DECchip */
2175 DevicePresent(dev, DE4X5_APROM);
2176 for (j=0, i=0; i<ETH_ALEN; i++) {
2177 j += (u_char) *((u_char *)&lp->srom + SROM_HWADD + i);
2178 }
2179 if (j != 0 && j != 6 * 0xff) {
2180 last.chipset = device;
2181 last.bus = pb;
2182 last.irq = irq;
2183 for (i=0; i<ETH_ALEN; i++) {
2184 last.addr[i] = (u_char)*((u_char *)&lp->srom + SROM_HWADD + i);
2185 }
2186 return;
2187 }
2188 }
2189
2190 return;
2191 }
2192
2193 /*
2194 ** PCI bus I/O device probe
2195 ** NB: PCI I/O accesses and Bus Mastering are enabled by the PCI BIOS, not
2196 ** the driver. Some PCI BIOS's, pre V2.1, need the slot + features to be
2197 ** enabled by the user first in the set up utility. Hence we just check for
2198 ** enabled features and silently ignore the card if they're not.
2199 **
2200 ** STOP PRESS: Some BIOS's __require__ the driver to enable the bus mastering
2201 ** bit. Here, check for I/O accesses and then set BM. If you put the card in
2202 ** a non BM slot, you're on your own (and complain to the PC vendor that your
2203 ** PC doesn't conform to the PCI standard)!
2204 **
2205 ** This function is only compatible with the *latest* 2.1.x kernels. For 2.0.x
2206 ** kernels use the V0.535[n] drivers.
2207 */
2208
2209 static int __devinit de4x5_pci_probe (struct pci_dev *pdev,
2210 const struct pci_device_id *ent)
2211 {
2212 u_char pb, pbus = 0, dev_num, dnum = 0, timer;
2213 u_short vendor, status;
2214 u_int irq = 0, device;
2215 u_long iobase = 0; /* Clear upper 32 bits in Alphas */
2216 int error;
2217 struct net_device *dev;
2218 struct de4x5_private *lp;
2219
2220 dev_num = PCI_SLOT(pdev->devfn);
2221 pb = pdev->bus->number;
2222
2223 if (io) { /* probe a single PCI device */
2224 pbus = (u_short)(io >> 8);
2225 dnum = (u_short)(io & 0xff);
2226 if ((pbus != pb) || (dnum != dev_num))
2227 return -ENODEV;
2228 }
2229
2230 vendor = pdev->vendor;
2231 device = pdev->device << 8;
2232 if (!(is_DC21040 || is_DC21041 || is_DC21140 || is_DC2114x))
2233 return -ENODEV;
2234
2235 /* Ok, the device seems to be for us. */
2236 if ((error = pci_enable_device (pdev)))
2237 return error;
2238
2239 if (!(dev = alloc_etherdev (sizeof (struct de4x5_private)))) {
2240 error = -ENOMEM;
2241 goto disable_dev;
2242 }
2243
2244 lp = netdev_priv(dev);
2245 lp->bus = PCI;
2246 lp->bus_num = 0;
2247
2248 /* Search for an SROM on this bus */
2249 if (lp->bus_num != pb) {
2250 lp->bus_num = pb;
2251 srom_search(dev, pdev);
2252 }
2253
2254 /* Get the chip configuration revision register */
2255 lp->cfrv = pdev->revision;
2256
2257 /* Set the device number information */
2258 lp->device = dev_num;
2259 lp->bus_num = pb;
2260
2261 /* Set the chipset information */
2262 if (is_DC2114x) {
2263 device = ((lp->cfrv & CFRV_RN) < DC2114x_BRK ? DC21142 : DC21143);
2264 }
2265 lp->chipset = device;
2266
2267 /* Get the board I/O address (64 bits on sparc64) */
2268 iobase = pci_resource_start(pdev, 0);
2269
2270 /* Fetch the IRQ to be used */
2271 irq = pdev->irq;
2272 if ((irq == 0) || (irq == 0xff) || ((int)irq == -1)) {
2273 error = -ENODEV;
2274 goto free_dev;
2275 }
2276
2277 /* Check if I/O accesses and Bus Mastering are enabled */
2278 pci_read_config_word(pdev, PCI_COMMAND, &status);
2279 #ifdef __powerpc__
2280 if (!(status & PCI_COMMAND_IO)) {
2281 status |= PCI_COMMAND_IO;
2282 pci_write_config_word(pdev, PCI_COMMAND, status);
2283 pci_read_config_word(pdev, PCI_COMMAND, &status);
2284 }
2285 #endif /* __powerpc__ */
2286 if (!(status & PCI_COMMAND_IO)) {
2287 error = -ENODEV;
2288 goto free_dev;
2289 }
2290
2291 if (!(status & PCI_COMMAND_MASTER)) {
2292 status |= PCI_COMMAND_MASTER;
2293 pci_write_config_word(pdev, PCI_COMMAND, status);
2294 pci_read_config_word(pdev, PCI_COMMAND, &status);
2295 }
2296 if (!(status & PCI_COMMAND_MASTER)) {
2297 error = -ENODEV;
2298 goto free_dev;
2299 }
2300
2301 /* Check the latency timer for values >= 0x60 */
2302 pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &timer);
2303 if (timer < 0x60) {
2304 pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x60);
2305 }
2306
2307 DevicePresent(dev, DE4X5_APROM);
2308
2309 if (!request_region (iobase, DE4X5_PCI_TOTAL_SIZE, "de4x5")) {
2310 error = -EBUSY;
2311 goto free_dev;
2312 }
2313
2314 dev->irq = irq;
2315
2316 if ((error = de4x5_hw_init(dev, iobase, &pdev->dev))) {
2317 goto release;
2318 }
2319
2320 return 0;
2321
2322 release:
2323 release_region (iobase, DE4X5_PCI_TOTAL_SIZE);
2324 free_dev:
2325 free_netdev (dev);
2326 disable_dev:
2327 pci_disable_device (pdev);
2328 return error;
2329 }
2330
2331 static void __devexit de4x5_pci_remove (struct pci_dev *pdev)
2332 {
2333 struct net_device *dev;
2334 u_long iobase;
2335
2336 dev = pdev->dev.driver_data;
2337 iobase = dev->base_addr;
2338
2339 unregister_netdev (dev);
2340 free_netdev (dev);
2341 release_region (iobase, DE4X5_PCI_TOTAL_SIZE);
2342 pci_disable_device (pdev);
2343 }
2344
2345 static struct pci_device_id de4x5_pci_tbl[] = {
2346 { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP,
2347 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
2348 { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP_PLUS,
2349 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },
2350 { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP_FAST,
2351 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 },
2352 { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21142,
2353 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3 },
2354 { },
2355 };
2356
2357 static struct pci_driver de4x5_pci_driver = {
2358 .name = "de4x5",
2359 .id_table = de4x5_pci_tbl,
2360 .probe = de4x5_pci_probe,
2361 .remove = __devexit_p (de4x5_pci_remove),
2362 };
2363
2364 #endif
2365
2366 /*
2367 ** Auto configure the media here rather than setting the port at compile
2368 ** time. This routine is called by de4x5_init() and when a loss of media is
2369 ** detected (excessive collisions, loss of carrier, no carrier or link fail
2370 ** [TP] or no recent receive activity) to check whether the user has been
2371 ** sneaky and changed the port on us.
2372 */
2373 static int
2374 autoconf_media(struct net_device *dev)
2375 {
2376 struct de4x5_private *lp = netdev_priv(dev);
2377 u_long iobase = dev->base_addr;
2378
2379 disable_ast(dev);
2380
2381 lp->c_media = AUTO; /* Bogus last media */
2382 inl(DE4X5_MFC); /* Zero the lost frames counter */
2383 lp->media = INIT;
2384 lp->tcount = 0;
2385
2386 de4x5_ast(dev);
2387
2388 return lp->media;
2389 }
2390
2391 /*
2392 ** Autoconfigure the media when using the DC21040. AUI cannot be distinguished
2393 ** from BNC as the port has a jumper to set thick or thin wire. When set for
2394 ** BNC, the BNC port will indicate activity if it's not terminated correctly.
2395 ** The only way to test for that is to place a loopback packet onto the
2396 ** network and watch for errors. Since we're messing with the interrupt mask
2397 ** register, disable the board interrupts and do not allow any more packets to
2398 ** be queued to the hardware. Re-enable everything only when the media is
2399 ** found.
2400 ** I may have to "age out" locally queued packets so that the higher layer
2401 ** timeouts don't effectively duplicate packets on the network.
2402 */
2403 static int
2404 dc21040_autoconf(struct net_device *dev)
2405 {
2406 struct de4x5_private *lp = netdev_priv(dev);
2407 u_long iobase = dev->base_addr;
2408 int next_tick = DE4X5_AUTOSENSE_MS;
2409 s32 imr;
2410
2411 switch (lp->media) {
2412 case INIT:
2413 DISABLE_IRQs;
2414 lp->tx_enable = false;
2415 lp->timeout = -1;
2416 de4x5_save_skbs(dev);
2417 if ((lp->autosense == AUTO) || (lp->autosense == TP)) {
2418 lp->media = TP;
2419 } else if ((lp->autosense == BNC) || (lp->autosense == AUI) || (lp->autosense == BNC_AUI)) {
2420 lp->media = BNC_AUI;
2421 } else if (lp->autosense == EXT_SIA) {
2422 lp->media = EXT_SIA;
2423 } else {
2424 lp->media = NC;
2425 }
2426 lp->local_state = 0;
2427 next_tick = dc21040_autoconf(dev);
2428 break;
2429
2430 case TP:
2431 next_tick = dc21040_state(dev, 0x8f01, 0xffff, 0x0000, 3000, BNC_AUI,
2432 TP_SUSPECT, test_tp);
2433 break;
2434
2435 case TP_SUSPECT:
2436 next_tick = de4x5_suspect_state(dev, 1000, TP, test_tp, dc21040_autoconf);
2437 break;
2438
2439 case BNC:
2440 case AUI:
2441 case BNC_AUI:
2442 next_tick = dc21040_state(dev, 0x8f09, 0x0705, 0x0006, 3000, EXT_SIA,
2443 BNC_AUI_SUSPECT, ping_media);
2444 break;
2445
2446 case BNC_AUI_SUSPECT:
2447 next_tick = de4x5_suspect_state(dev, 1000, BNC_AUI, ping_media, dc21040_autoconf);
2448 break;
2449
2450 case EXT_SIA:
2451 next_tick = dc21040_state(dev, 0x3041, 0x0000, 0x0006, 3000,
2452 NC, EXT_SIA_SUSPECT, ping_media);
2453 break;
2454
2455 case EXT_SIA_SUSPECT:
2456 next_tick = de4x5_suspect_state(dev, 1000, EXT_SIA, ping_media, dc21040_autoconf);
2457 break;
2458
2459 case NC:
2460 /* default to TP for all */
2461 reset_init_sia(dev, 0x8f01, 0xffff, 0x0000);
2462 if (lp->media != lp->c_media) {
2463 de4x5_dbg_media(dev);
2464 lp->c_media = lp->media;
2465 }
2466 lp->media = INIT;
2467 lp->tx_enable = false;
2468 break;
2469 }
2470
2471 return next_tick;
2472 }
2473
2474 static int
2475 dc21040_state(struct net_device *dev, int csr13, int csr14, int csr15, int timeout,
2476 int next_state, int suspect_state,
2477 int (*fn)(struct net_device *, int))
2478 {
2479 struct de4x5_private *lp = netdev_priv(dev);
2480 int next_tick = DE4X5_AUTOSENSE_MS;
2481 int linkBad;
2482
2483 switch (lp->local_state) {
2484 case 0:
2485 reset_init_sia(dev, csr13, csr14, csr15);
2486 lp->local_state++;
2487 next_tick = 500;
2488 break;
2489
2490 case 1:
2491 if (!lp->tx_enable) {
2492 linkBad = fn(dev, timeout);
2493 if (linkBad < 0) {
2494 next_tick = linkBad & ~TIMER_CB;
2495 } else {
2496 if (linkBad && (lp->autosense == AUTO)) {
2497 lp->local_state = 0;
2498 lp->media = next_state;
2499 } else {
2500 de4x5_init_connection(dev);
2501 }
2502 }
2503 } else if (!lp->linkOK && (lp->autosense == AUTO)) {
2504 lp->media = suspect_state;
2505 next_tick = 3000;
2506 }
2507 break;
2508 }
2509
2510 return next_tick;
2511 }
2512
2513 static int
2514 de4x5_suspect_state(struct net_device *dev, int timeout, int prev_state,
2515 int (*fn)(struct net_device *, int),
2516 int (*asfn)(struct net_device *))
2517 {
2518 struct de4x5_private *lp = netdev_priv(dev);
2519 int next_tick = DE4X5_AUTOSENSE_MS;
2520 int linkBad;
2521
2522 switch (lp->local_state) {
2523 case 1:
2524 if (lp->linkOK) {
2525 lp->media = prev_state;
2526 } else {
2527 lp->local_state++;
2528 next_tick = asfn(dev);
2529 }
2530 break;
2531
2532 case 2:
2533 linkBad = fn(dev, timeout);
2534 if (linkBad < 0) {
2535 next_tick = linkBad & ~TIMER_CB;
2536 } else if (!linkBad) {
2537 lp->local_state--;
2538 lp->media = prev_state;
2539 } else {
2540 lp->media = INIT;
2541 lp->tcount++;
2542 }
2543 }
2544
2545 return next_tick;
2546 }
2547
2548 /*
2549 ** Autoconfigure the media when using the DC21041. AUI needs to be tested
2550 ** before BNC, because the BNC port will indicate activity if it's not
2551 ** terminated correctly. The only way to test for that is to place a loopback
2552 ** packet onto the network and watch for errors. Since we're messing with
2553 ** the interrupt mask register, disable the board interrupts and do not allow
2554 ** any more packets to be queued to the hardware. Re-enable everything only
2555 ** when the media is found.
2556 */
2557 static int
2558 dc21041_autoconf(struct net_device *dev)
2559 {
2560 struct de4x5_private *lp = netdev_priv(dev);
2561 u_long iobase = dev->base_addr;
2562 s32 sts, irqs, irq_mask, imr, omr;
2563 int next_tick = DE4X5_AUTOSENSE_MS;
2564
2565 switch (lp->media) {
2566 case INIT:
2567 DISABLE_IRQs;
2568 lp->tx_enable = false;
2569 lp->timeout = -1;
2570 de4x5_save_skbs(dev); /* Save non transmitted skb's */
2571 if ((lp->autosense == AUTO) || (lp->autosense == TP_NW)) {
2572 lp->media = TP; /* On chip auto negotiation is broken */
2573 } else if (lp->autosense == TP) {
2574 lp->media = TP;
2575 } else if (lp->autosense == BNC) {
2576 lp->media = BNC;
2577 } else if (lp->autosense == AUI) {
2578 lp->media = AUI;
2579 } else {
2580 lp->media = NC;
2581 }
2582 lp->local_state = 0;
2583 next_tick = dc21041_autoconf(dev);
2584 break;
2585
2586 case TP_NW:
2587 if (lp->timeout < 0) {
2588 omr = inl(DE4X5_OMR);/* Set up full duplex for the autonegotiate */
2589 outl(omr | OMR_FDX, DE4X5_OMR);
2590 }
2591 irqs = STS_LNF | STS_LNP;
2592 irq_mask = IMR_LFM | IMR_LPM;
2593 sts = test_media(dev, irqs, irq_mask, 0xef01, 0xffff, 0x0008, 2400);
2594 if (sts < 0) {
2595 next_tick = sts & ~TIMER_CB;
2596 } else {
2597 if (sts & STS_LNP) {
2598 lp->media = ANS;
2599 } else {
2600 lp->media = AUI;
2601 }
2602 next_tick = dc21041_autoconf(dev);
2603 }
2604 break;
2605
2606 case ANS:
2607 if (!lp->tx_enable) {
2608 irqs = STS_LNP;
2609 irq_mask = IMR_LPM;
2610 sts = test_ans(dev, irqs, irq_mask, 3000);
2611 if (sts < 0) {
2612 next_tick = sts & ~TIMER_CB;
2613 } else {
2614 if (!(sts & STS_LNP) && (lp->autosense == AUTO)) {
2615 lp->media = TP;
2616 next_tick = dc21041_autoconf(dev);
2617 } else {
2618 lp->local_state = 1;
2619 de4x5_init_connection(dev);
2620 }
2621 }
2622 } else if (!lp->linkOK && (lp->autosense == AUTO)) {
2623 lp->media = ANS_SUSPECT;
2624 next_tick = 3000;
2625 }
2626 break;
2627
2628 case ANS_SUSPECT:
2629 next_tick = de4x5_suspect_state(dev, 1000, ANS, test_tp, dc21041_autoconf);
2630 break;
2631
2632 case TP:
2633 if (!lp->tx_enable) {
2634 if (lp->timeout < 0) {
2635 omr = inl(DE4X5_OMR); /* Set up half duplex for TP */
2636 outl(omr & ~OMR_FDX, DE4X5_OMR);
2637 }
2638 irqs = STS_LNF | STS_LNP;
2639 irq_mask = IMR_LFM | IMR_LPM;
2640 sts = test_media(dev,irqs, irq_mask, 0xef01, 0xff3f, 0x0008, 2400);
2641 if (sts < 0) {
2642 next_tick = sts & ~TIMER_CB;
2643 } else {
2644 if (!(sts & STS_LNP) && (lp->autosense == AUTO)) {
2645 if (inl(DE4X5_SISR) & SISR_NRA) {
2646 lp->media = AUI; /* Non selected port activity */
2647 } else {
2648 lp->media = BNC;
2649 }
2650 next_tick = dc21041_autoconf(dev);
2651 } else {
2652 lp->local_state = 1;
2653 de4x5_init_connection(dev);
2654 }
2655 }
2656 } else if (!lp->linkOK && (lp->autosense == AUTO)) {
2657 lp->media = TP_SUSPECT;
2658 next_tick = 3000;
2659 }
2660 break;
2661
2662 case TP_SUSPECT:
2663 next_tick = de4x5_suspect_state(dev, 1000, TP, test_tp, dc21041_autoconf);
2664 break;
2665
2666 case AUI:
2667 if (!lp->tx_enable) {
2668 if (lp->timeout < 0) {
2669 omr = inl(DE4X5_OMR); /* Set up half duplex for AUI */
2670 outl(omr & ~OMR_FDX, DE4X5_OMR);
2671 }
2672 irqs = 0;
2673 irq_mask = 0;
2674 sts = test_media(dev,irqs, irq_mask, 0xef09, 0xf73d, 0x000e, 1000);
2675 if (sts < 0) {
2676 next_tick = sts & ~TIMER_CB;
2677 } else {
2678 if (!(inl(DE4X5_SISR) & SISR_SRA) && (lp->autosense == AUTO)) {
2679 lp->media = BNC;
2680 next_tick = dc21041_autoconf(dev);
2681 } else {
2682 lp->local_state = 1;
2683 de4x5_init_connection(dev);
2684 }
2685 }
2686 } else if (!lp->linkOK && (lp->autosense == AUTO)) {
2687 lp->media = AUI_SUSPECT;
2688 next_tick = 3000;
2689 }
2690 break;
2691
2692 case AUI_SUSPECT:
2693 next_tick = de4x5_suspect_state(dev, 1000, AUI, ping_media, dc21041_autoconf);
2694 break;
2695
2696 case BNC:
2697 switch (lp->local_state) {
2698 case 0:
2699 if (lp->timeout < 0) {
2700 omr = inl(DE4X5_OMR); /* Set up half duplex for BNC */
2701 outl(omr & ~OMR_FDX, DE4X5_OMR);
2702 }
2703 irqs = 0;
2704 irq_mask = 0;
2705 sts = test_media(dev,irqs, irq_mask, 0xef09, 0xf73d, 0x0006, 1000);
2706 if (sts < 0) {
2707 next_tick = sts & ~TIMER_CB;
2708 } else {
2709 lp->local_state++; /* Ensure media connected */
2710 next_tick = dc21041_autoconf(dev);
2711 }
2712 break;
2713
2714 case 1:
2715 if (!lp->tx_enable) {
2716 if ((sts = ping_media(dev, 3000)) < 0) {
2717 next_tick = sts & ~TIMER_CB;
2718 } else {
2719 if (sts) {
2720 lp->local_state = 0;
2721 lp->media = NC;
2722 } else {
2723 de4x5_init_connection(dev);
2724 }
2725 }
2726 } else if (!lp->linkOK && (lp->autosense == AUTO)) {
2727 lp->media = BNC_SUSPECT;
2728 next_tick = 3000;
2729 }
2730 break;
2731 }
2732 break;
2733
2734 case BNC_SUSPECT:
2735 next_tick = de4x5_suspect_state(dev, 1000, BNC, ping_media, dc21041_autoconf);
2736 break;
2737
2738 case NC:
2739 omr = inl(DE4X5_OMR); /* Set up full duplex for the autonegotiate */
2740 outl(omr | OMR_FDX, DE4X5_OMR);
2741 reset_init_sia(dev, 0xef01, 0xffff, 0x0008);/* Initialise the SIA */
2742 if (lp->media != lp->c_media) {
2743 de4x5_dbg_media(dev);
2744 lp->c_media = lp->media;
2745 }
2746 lp->media = INIT;
2747 lp->tx_enable = false;
2748 break;
2749 }
2750
2751 return next_tick;
2752 }
2753
2754 /*
2755 ** Some autonegotiation chips are broken in that they do not return the
2756 ** acknowledge bit (anlpa & MII_ANLPA_ACK) in the link partner advertisement
2757 ** register, except at the first power up negotiation.
2758 */
2759 static int
2760 dc21140m_autoconf(struct net_device *dev)
2761 {
2762 struct de4x5_private *lp = netdev_priv(dev);
2763 int ana, anlpa, cap, cr, slnk, sr;
2764 int next_tick = DE4X5_AUTOSENSE_MS;
2765 u_long imr, omr, iobase = dev->base_addr;
2766
2767 switch(lp->media) {
2768 case INIT:
2769 if (lp->timeout < 0) {
2770 DISABLE_IRQs;
2771 lp->tx_enable = false;
2772 lp->linkOK = 0;
2773 de4x5_save_skbs(dev); /* Save non transmitted skb's */
2774 }
2775 if ((next_tick = de4x5_reset_phy(dev)) < 0) {
2776 next_tick &= ~TIMER_CB;
2777 } else {
2778 if (lp->useSROM) {
2779 if (srom_map_media(dev) < 0) {
2780 lp->tcount++;
2781 return next_tick;
2782 }
2783 srom_exec(dev, lp->phy[lp->active].gep);
2784 if (lp->infoblock_media == ANS) {
2785 ana = lp->phy[lp->active].ana | MII_ANA_CSMA;
2786 mii_wr(ana, MII_ANA, lp->phy[lp->active].addr, DE4X5_MII);
2787 }
2788 } else {
2789 lp->tmp = MII_SR_ASSC; /* Fake out the MII speed set */
2790 SET_10Mb;
2791 if (lp->autosense == _100Mb) {
2792 lp->media = _100Mb;
2793 } else if (lp->autosense == _10Mb) {
2794 lp->media = _10Mb;
2795 } else if ((lp->autosense == AUTO) &&
2796 ((sr=is_anc_capable(dev)) & MII_SR_ANC)) {
2797 ana = (((sr >> 6) & MII_ANA_TAF) | MII_ANA_CSMA);
2798 ana &= (lp->fdx ? ~0 : ~MII_ANA_FDAM);
2799 mii_wr(ana, MII_ANA, lp->phy[lp->active].addr, DE4X5_MII);
2800 lp->media = ANS;
2801 } else if (lp->autosense == AUTO) {
2802 lp->media = SPD_DET;
2803 } else if (is_spd_100(dev) && is_100_up(dev)) {
2804 lp->media = _100Mb;
2805 } else {
2806 lp->media = NC;
2807 }
2808 }
2809 lp->local_state = 0;
2810 next_tick = dc21140m_autoconf(dev);
2811 }
2812 break;
2813
2814 case ANS:
2815 switch (lp->local_state) {
2816 case 0:
2817 if (lp->timeout < 0) {
2818 mii_wr(MII_CR_ASSE | MII_CR_RAN, MII_CR, lp->phy[lp->active].addr, DE4X5_MII);
2819 }
2820 cr = test_mii_reg(dev, MII_CR, MII_CR_RAN, false, 500);
2821 if (cr < 0) {
2822 next_tick = cr & ~TIMER_CB;
2823 } else {
2824 if (cr) {
2825 lp->local_state = 0;
2826 lp->media = SPD_DET;
2827 } else {
2828 lp->local_state++;
2829 }
2830 next_tick = dc21140m_autoconf(dev);
2831 }
2832 break;
2833
2834 case 1:
2835 if ((sr=test_mii_reg(dev, MII_SR, MII_SR_ASSC, true, 2000)) < 0) {
2836 next_tick = sr & ~TIMER_CB;
2837 } else {
2838 lp->media = SPD_DET;
2839 lp->local_state = 0;
2840 if (sr) { /* Success! */
2841 lp->tmp = MII_SR_ASSC;
2842 anlpa = mii_rd(MII_ANLPA, lp->phy[lp->active].addr, DE4X5_MII);
2843 ana = mii_rd(MII_ANA, lp->phy[lp->active].addr, DE4X5_MII);
2844 if (!(anlpa & MII_ANLPA_RF) &&
2845 (cap = anlpa & MII_ANLPA_TAF & ana)) {
2846 if (cap & MII_ANA_100M) {
2847 lp->fdx = (ana & anlpa & MII_ANA_FDAM & MII_ANA_100M) != 0;
2848 lp->media = _100Mb;
2849 } else if (cap & MII_ANA_10M) {
2850 lp->fdx = (ana & anlpa & MII_ANA_FDAM & MII_ANA_10M) != 0;
2851
2852 lp->media = _10Mb;
2853 }
2854 }
2855 } /* Auto Negotiation failed to finish */
2856 next_tick = dc21140m_autoconf(dev);
2857 } /* Auto Negotiation failed to start */
2858 break;
2859 }
2860 break;
2861
2862 case SPD_DET: /* Choose 10Mb/s or 100Mb/s */
2863 if (lp->timeout < 0) {
2864 lp->tmp = (lp->phy[lp->active].id ? MII_SR_LKS :
2865 (~gep_rd(dev) & GEP_LNP));
2866 SET_100Mb_PDET;
2867 }
2868 if ((slnk = test_for_100Mb(dev, 6500)) < 0) {
2869 next_tick = slnk & ~TIMER_CB;
2870 } else {
2871 if (is_spd_100(dev) && is_100_up(dev)) {
2872 lp->media = _100Mb;
2873 } else if ((!is_spd_100(dev) && (is_10_up(dev) & lp->tmp))) {
2874 lp->media = _10Mb;
2875 } else {
2876 lp->media = NC;
2877 }
2878 next_tick = dc21140m_autoconf(dev);
2879 }
2880 break;
2881
2882 case _100Mb: /* Set 100Mb/s */
2883 next_tick = 3000;
2884 if (!lp->tx_enable) {
2885 SET_100Mb;
2886 de4x5_init_connection(dev);
2887 } else {
2888 if (!lp->linkOK && (lp->autosense == AUTO)) {
2889 if (!is_100_up(dev) || (!lp->useSROM && !is_spd_100(dev))) {
2890 lp->media = INIT;
2891 lp->tcount++;
2892 next_tick = DE4X5_AUTOSENSE_MS;
2893 }
2894 }
2895 }
2896 break;
2897
2898 case BNC:
2899 case AUI:
2900 case _10Mb: /* Set 10Mb/s */
2901 next_tick = 3000;
2902 if (!lp->tx_enable) {
2903 SET_10Mb;
2904 de4x5_init_connection(dev);
2905 } else {
2906 if (!lp->linkOK && (lp->autosense == AUTO)) {
2907 if (!is_10_up(dev) || (!lp->useSROM && is_spd_100(dev))) {
2908 lp->media = INIT;
2909 lp->tcount++;
2910 next_tick = DE4X5_AUTOSENSE_MS;
2911 }
2912 }
2913 }
2914 break;
2915
2916 case NC:
2917 if (lp->media != lp->c_media) {
2918 de4x5_dbg_media(dev);
2919 lp->c_media = lp->media;
2920 }
2921 lp->media = INIT;
2922 lp->tx_enable = false;
2923 break;
2924 }
2925
2926 return next_tick;
2927 }
2928
2929 /*
2930 ** This routine may be merged into dc21140m_autoconf() sometime as I'm
2931 ** changing how I figure out the media - but trying to keep it backwards
2932 ** compatible with the de500-xa and de500-aa.
2933 ** Whether it's BNC, AUI, SYM or MII is sorted out in the infoblock
2934 ** functions and set during de4x5_mac_port() and/or de4x5_reset_phy().
2935 ** This routine just has to figure out whether 10Mb/s or 100Mb/s is
2936 ** active.
2937 ** When autonegotiation is working, the ANS part searches the SROM for
2938 ** the highest common speed (TP) link that both can run and if that can
2939 ** be full duplex. That infoblock is executed and then the link speed set.
2940 **
2941 ** Only _10Mb and _100Mb are tested here.
2942 */
2943 static int
2944 dc2114x_autoconf(struct net_device *dev)
2945 {
2946 struct de4x5_private *lp = netdev_priv(dev);
2947 u_long iobase = dev->base_addr;
2948 s32 cr, anlpa, ana, cap, irqs, irq_mask, imr, omr, slnk, sr, sts;
2949 int next_tick = DE4X5_AUTOSENSE_MS;
2950
2951 switch (lp->media) {
2952 case INIT:
2953 if (lp->timeout < 0) {
2954 DISABLE_IRQs;
2955 lp->tx_enable = false;
2956 lp->linkOK = 0;
2957 lp->timeout = -1;
2958 de4x5_save_skbs(dev); /* Save non transmitted skb's */
2959 if (lp->params.autosense & ~AUTO) {
2960 srom_map_media(dev); /* Fixed media requested */
2961 if (lp->media != lp->params.autosense) {
2962 lp->tcount++;
2963 lp->media = INIT;
2964 return next_tick;
2965 }
2966 lp->media = INIT;
2967 }
2968 }
2969 if ((next_tick = de4x5_reset_phy(dev)) < 0) {
2970 next_tick &= ~TIMER_CB;
2971 } else {
2972 if (lp->autosense == _100Mb) {
2973 lp->media = _100Mb;
2974 } else if (lp->autosense == _10Mb) {
2975 lp->media = _10Mb;
2976 } else if (lp->autosense == TP) {
2977 lp->media = TP;
2978 } else if (lp->autosense == BNC) {
2979 lp->media = BNC;
2980 } else if (lp->autosense == AUI) {
2981 lp->media = AUI;
2982 } else {
2983 lp->media = SPD_DET;
2984 if ((lp->infoblock_media == ANS) &&
2985 ((sr=is_anc_capable(dev)) & MII_SR_ANC)) {
2986 ana = (((sr >> 6) & MII_ANA_TAF) | MII_ANA_CSMA);
2987 ana &= (lp->fdx ? ~0 : ~MII_ANA_FDAM);
2988 mii_wr(ana, MII_ANA, lp->phy[lp->active].addr, DE4X5_MII);
2989 lp->media = ANS;
2990 }
2991 }
2992 lp->local_state = 0;
2993 next_tick = dc2114x_autoconf(dev);
2994 }
2995 break;
2996
2997 case ANS:
2998 switch (lp->local_state) {
2999 case 0:
3000 if (lp->timeout < 0) {
3001 mii_wr(MII_CR_ASSE | MII_CR_RAN, MII_CR, lp->phy[lp->active].addr, DE4X5_MII);
3002 }
3003 cr = test_mii_reg(dev, MII_CR, MII_CR_RAN, false, 500);
3004 if (cr < 0) {
3005 next_tick = cr & ~TIMER_CB;
3006 } else {
3007 if (cr) {
3008 lp->local_state = 0;
3009 lp->media = SPD_DET;
3010 } else {
3011 lp->local_state++;
3012 }
3013 next_tick = dc2114x_autoconf(dev);
3014 }
3015 break;
3016
3017 case 1:
3018 sr = test_mii_reg(dev, MII_SR, MII_SR_ASSC, true, 2000);
3019 if (sr < 0) {
3020 next_tick = sr & ~TIMER_CB;
3021 } else {
3022 lp->media = SPD_DET;
3023 lp->local_state = 0;
3024 if (sr) { /* Success! */
3025 lp->tmp = MII_SR_ASSC;
3026 anlpa = mii_rd(MII_ANLPA, lp->phy[lp->active].addr, DE4X5_MII);
3027 ana = mii_rd(MII_ANA, lp->phy[lp->active].addr, DE4X5_MII);
3028 if (!(anlpa & MII_ANLPA_RF) &&
3029 (cap = anlpa & MII_ANLPA_TAF & ana)) {
3030 if (cap & MII_ANA_100M) {
3031 lp->fdx = (ana & anlpa & MII_ANA_FDAM & MII_ANA_100M) != 0;
3032 lp->media = _100Mb;
3033 } else if (cap & MII_ANA_10M) {
3034 lp->fdx = (ana & anlpa & MII_ANA_FDAM & MII_ANA_10M) != 0;
3035 lp->media = _10Mb;
3036 }
3037 }
3038 } /* Auto Negotiation failed to finish */
3039 next_tick = dc2114x_autoconf(dev);
3040 } /* Auto Negotiation failed to start */
3041 break;
3042 }
3043 break;
3044
3045 case AUI:
3046 if (!lp->tx_enable) {
3047 if (lp->timeout < 0) {
3048 omr = inl(DE4X5_OMR); /* Set up half duplex for AUI */
3049 outl(omr & ~OMR_FDX, DE4X5_OMR);
3050 }
3051 irqs = 0;
3052 irq_mask = 0;
3053 sts = test_media(dev,irqs, irq_mask, 0, 0, 0, 1000);
3054 if (sts < 0) {
3055 next_tick = sts & ~TIMER_CB;
3056 } else {
3057 if (!(inl(DE4X5_SISR) & SISR_SRA) && (lp->autosense == AUTO)) {
3058 lp->media = BNC;
3059 next_tick = dc2114x_autoconf(dev);
3060 } else {
3061 lp->local_state = 1;
3062 de4x5_init_connection(dev);
3063 }
3064 }
3065 } else if (!lp->linkOK && (lp->autosense == AUTO)) {
3066 lp->media = AUI_SUSPECT;
3067 next_tick = 3000;
3068 }
3069 break;
3070
3071 case AUI_SUSPECT:
3072 next_tick = de4x5_suspect_state(dev, 1000, AUI, ping_media, dc2114x_autoconf);
3073 break;
3074
3075 case BNC:
3076 switch (lp->local_state) {
3077 case 0:
3078 if (lp->timeout < 0) {
3079 omr = inl(DE4X5_OMR); /* Set up half duplex for BNC */
3080 outl(omr & ~OMR_FDX, DE4X5_OMR);
3081 }
3082 irqs = 0;
3083 irq_mask = 0;
3084 sts = test_media(dev,irqs, irq_mask, 0, 0, 0, 1000);
3085 if (sts < 0) {
3086 next_tick = sts & ~TIMER_CB;
3087 } else {
3088 lp->local_state++; /* Ensure media connected */
3089 next_tick = dc2114x_autoconf(dev);
3090 }
3091 break;
3092
3093 case 1:
3094 if (!lp->tx_enable) {
3095 if ((sts = ping_media(dev, 3000)) < 0) {
3096 next_tick = sts & ~TIMER_CB;
3097 } else {
3098 if (sts) {
3099 lp->local_state = 0;
3100 lp->tcount++;
3101 lp->media = INIT;
3102 } else {
3103 de4x5_init_connection(dev);
3104 }
3105 }
3106 } else if (!lp->linkOK && (lp->autosense == AUTO)) {
3107 lp->media = BNC_SUSPECT;
3108 next_tick = 3000;
3109 }
3110 break;
3111 }
3112 break;
3113
3114 case BNC_SUSPECT:
3115 next_tick = de4x5_suspect_state(dev, 1000, BNC, ping_media, dc2114x_autoconf);
3116 break;
3117
3118 case SPD_DET: /* Choose 10Mb/s or 100Mb/s */
3119 if (srom_map_media(dev) < 0) {
3120 lp->tcount++;
3121 lp->media = INIT;
3122 return next_tick;
3123 }
3124 if (lp->media == _100Mb) {
3125 if ((slnk = test_for_100Mb(dev, 6500)) < 0) {
3126 lp->media = SPD_DET;
3127 return (slnk & ~TIMER_CB);
3128 }
3129 } else {
3130 if (wait_for_link(dev) < 0) {
3131 lp->media = SPD_DET;
3132 return PDET_LINK_WAIT;
3133 }
3134 }
3135 if (lp->media == ANS) { /* Do MII parallel detection */
3136 if (is_spd_100(dev)) {
3137 lp->media = _100Mb;
3138 } else {
3139 lp->media = _10Mb;
3140 }
3141 next_tick = dc2114x_autoconf(dev);
3142 } else if (((lp->media == _100Mb) && is_100_up(dev)) ||
3143 (((lp->media == _10Mb) || (lp->media == TP) ||
3144 (lp->media == BNC) || (lp->media == AUI)) &&
3145 is_10_up(dev))) {
3146 next_tick = dc2114x_autoconf(dev);
3147 } else {
3148 lp->tcount++;
3149 lp->media = INIT;
3150 }
3151 break;
3152
3153 case _10Mb:
3154 next_tick = 3000;
3155 if (!lp->tx_enable) {
3156 SET_10Mb;
3157 de4x5_init_connection(dev);
3158 } else {
3159 if (!lp->linkOK && (lp->autosense == AUTO)) {
3160 if (!is_10_up(dev) || (!lp->useSROM && is_spd_100(dev))) {
3161 lp->media = INIT;
3162 lp->tcount++;
3163 next_tick = DE4X5_AUTOSENSE_MS;
3164 }
3165 }
3166 }
3167 break;
3168
3169 case _100Mb:
3170 next_tick = 3000;
3171 if (!lp->tx_enable) {
3172 SET_100Mb;
3173 de4x5_init_connection(dev);
3174 } else {
3175 if (!lp->linkOK && (lp->autosense == AUTO)) {
3176 if (!is_100_up(dev) || (!lp->useSROM && !is_spd_100(dev))) {
3177 lp->media = INIT;
3178 lp->tcount++;
3179 next_tick = DE4X5_AUTOSENSE_MS;
3180 }
3181 }
3182 }
3183 break;
3184
3185 default:
3186 lp->tcount++;
3187 printk("Huh?: media:%02x\n", lp->media);
3188 lp->media = INIT;
3189 break;
3190 }
3191
3192 return next_tick;
3193 }
3194
3195 static int
3196 srom_autoconf(struct net_device *dev)
3197 {
3198 struct de4x5_private *lp = netdev_priv(dev);
3199
3200 return lp->infoleaf_fn(dev);
3201 }
3202
3203 /*
3204 ** This mapping keeps the original media codes and FDX flag unchanged.
3205 ** While it isn't strictly necessary, it helps me for the moment...
3206 ** The early return avoids a media state / SROM media space clash.
3207 */
3208 static int
3209 srom_map_media(struct net_device *dev)
3210 {
3211 struct de4x5_private *lp = netdev_priv(dev);
3212
3213 lp->fdx = false;
3214 if (lp->infoblock_media == lp->media)
3215 return 0;
3216
3217 switch(lp->infoblock_media) {
3218 case SROM_10BASETF:
3219 if (!lp->params.fdx) return -1;
3220 lp->fdx = true;
3221 case SROM_10BASET:
3222 if (lp->params.fdx && !lp->fdx) return -1;
3223 if ((lp->chipset == DC21140) || ((lp->chipset & ~0x00ff) == DC2114x)) {
3224 lp->media = _10Mb;
3225 } else {
3226 lp->media = TP;
3227 }
3228 break;
3229
3230 case SROM_10BASE2:
3231 lp->media = BNC;
3232 break;
3233
3234 case SROM_10BASE5:
3235 lp->media = AUI;
3236 break;
3237
3238 case SROM_100BASETF:
3239 if (!lp->params.fdx) return -1;
3240 lp->fdx = true;
3241 case SROM_100BASET:
3242 if (lp->params.fdx && !lp->fdx) return -1;
3243 lp->media = _100Mb;
3244 break;
3245
3246 case SROM_100BASET4:
3247 lp->media = _100Mb;
3248 break;
3249
3250 case SROM_100BASEFF:
3251 if (!lp->params.fdx) return -1;
3252 lp->fdx = true;
3253 case SROM_100BASEF:
3254 if (lp->params.fdx && !lp->fdx) return -1;
3255 lp->media = _100Mb;
3256 break;
3257
3258 case ANS:
3259 lp->media = ANS;
3260 lp->fdx = lp->params.fdx;
3261 break;
3262
3263 default:
3264 printk("%s: Bad media code [%d] detected in SROM!\n", dev->name,
3265 lp->infoblock_media);
3266 return -1;
3267 break;
3268 }
3269
3270 return 0;
3271 }
3272
3273 static void
3274 de4x5_init_connection(struct net_device *dev)
3275 {
3276 struct de4x5_private *lp = netdev_priv(dev);
3277 u_long iobase = dev->base_addr;
3278 u_long flags = 0;
3279
3280 if (lp->media != lp->c_media) {
3281 de4x5_dbg_media(dev);
3282 lp->c_media = lp->media; /* Stop scrolling media messages */
3283 }
3284
3285 spin_lock_irqsave(&lp->lock, flags);
3286 de4x5_rst_desc_ring(dev);
3287 de4x5_setup_intr(dev);
3288 lp->tx_enable = true;
3289 spin_unlock_irqrestore(&lp->lock, flags);
3290 outl(POLL_DEMAND, DE4X5_TPD);
3291
3292 netif_wake_queue(dev);
3293
3294 return;
3295 }
3296
3297 /*
3298 ** General PHY reset function. Some MII devices don't reset correctly
3299 ** since their MII address pins can float at voltages that are dependent
3300 ** on the signal pin use. Do a double reset to ensure a reset.
3301 */
3302 static int
3303 de4x5_reset_phy(struct net_device *dev)
3304 {
3305 struct de4x5_private *lp = netdev_priv(dev);
3306 u_long iobase = dev->base_addr;
3307 int next_tick = 0;
3308
3309 if ((lp->useSROM) || (lp->phy[lp->active].id)) {
3310 if (lp->timeout < 0) {
3311 if (lp->useSROM) {
3312 if (lp->phy[lp->active].rst) {
3313 srom_exec(dev, lp->phy[lp->active].rst);
3314 srom_exec(dev, lp->phy[lp->active].rst);
3315 } else if (lp->rst) { /* Type 5 infoblock reset */
3316 srom_exec(dev, lp->rst);
3317 srom_exec(dev, lp->rst);
3318 }
3319 } else {
3320 PHY_HARD_RESET;
3321 }
3322 if (lp->useMII) {
3323 mii_wr(MII_CR_RST, MII_CR, lp->phy[lp->active].addr, DE4X5_MII);
3324 }
3325 }
3326 if (lp->useMII) {
3327 next_tick = test_mii_reg(dev, MII_CR, MII_CR_RST, false, 500);
3328 }
3329 } else if (lp->chipset == DC21140) {
3330 PHY_HARD_RESET;
3331 }
3332
3333 return next_tick;
3334 }
3335
3336 static int
3337 test_media(struct net_device *dev, s32 irqs, s32 irq_mask, s32 csr13, s32 csr14, s32 csr15, s32 msec)
3338 {
3339 struct de4x5_private *lp = netdev_priv(dev);
3340 u_long iobase = dev->base_addr;
3341 s32 sts, csr12;
3342
3343 if (lp->timeout < 0) {
3344 lp->timeout = msec/100;
3345 if (!lp->useSROM) { /* Already done if by SROM, else dc2104[01] */
3346 reset_init_sia(dev, csr13, csr14, csr15);
3347 }
3348
3349 /* set up the interrupt mask */
3350 outl(irq_mask, DE4X5_IMR);
3351
3352 /* clear all pending interrupts */
3353 sts = inl(DE4X5_STS);
3354 outl(sts, DE4X5_STS);
3355
3356 /* clear csr12 NRA and SRA bits */
3357 if ((lp->chipset == DC21041) || lp->useSROM) {
3358 csr12 = inl(DE4X5_SISR);
3359 outl(csr12, DE4X5_SISR);
3360 }
3361 }
3362
3363 sts = inl(DE4X5_STS) & ~TIMER_CB;
3364
3365 if (!(sts & irqs) && --lp->timeout) {
3366 sts = 100 | TIMER_CB;
3367 } else {
3368 lp->timeout = -1;
3369 }
3370
3371 return sts;
3372 }
3373
3374 static int
3375 test_tp(struct net_device *dev, s32 msec)
3376 {
3377 struct de4x5_private *lp = netdev_priv(dev);
3378 u_long iobase = dev->base_addr;
3379 int sisr;
3380
3381 if (lp->timeout < 0) {
3382 lp->timeout = msec/100;
3383 }
3384
3385 sisr = (inl(DE4X5_SISR) & ~TIMER_CB) & (SISR_LKF | SISR_NCR);
3386
3387 if (sisr && --lp->timeout) {
3388 sisr = 100 | TIMER_CB;
3389 } else {
3390 lp->timeout = -1;
3391 }
3392
3393 return sisr;
3394 }
3395
3396 /*
3397 ** Samples the 100Mb Link State Signal. The sample interval is important
3398 ** because too fast a rate can give erroneous results and confuse the
3399 ** speed sense algorithm.
3400 */
3401 #define SAMPLE_INTERVAL 500 /* ms */
3402 #define SAMPLE_DELAY 2000 /* ms */
3403 static int
3404 test_for_100Mb(struct net_device *dev, int msec)
3405 {
3406 struct de4x5_private *lp = netdev_priv(dev);
3407 int gep = 0, ret = ((lp->chipset & ~0x00ff)==DC2114x? -1 :GEP_SLNK);
3408
3409 if (lp->timeout < 0) {
3410 if ((msec/SAMPLE_INTERVAL) <= 0) return 0;
3411 if (msec > SAMPLE_DELAY) {
3412 lp->timeout = (msec - SAMPLE_DELAY)/SAMPLE_INTERVAL;
3413 gep = SAMPLE_DELAY | TIMER_CB;
3414 return gep;
3415 } else {
3416 lp->timeout = msec/SAMPLE_INTERVAL;
3417 }
3418 }
3419
3420 if (lp->phy[lp->active].id || lp->useSROM) {
3421 gep = is_100_up(dev) | is_spd_100(dev);
3422 } else {
3423 gep = (~gep_rd(dev) & (GEP_SLNK | GEP_LNP));
3424 }
3425 if (!(gep & ret) && --lp->timeout) {
3426 gep = SAMPLE_INTERVAL | TIMER_CB;
3427 } else {
3428 lp->timeout = -1;
3429 }
3430
3431 return gep;
3432 }
3433
3434 static int
3435 wait_for_link(struct net_device *dev)
3436 {
3437 struct de4x5_private *lp = netdev_priv(dev);
3438
3439 if (lp->timeout < 0) {
3440 lp->timeout = 1;
3441 }
3442
3443 if (lp->timeout--) {
3444 return TIMER_CB;
3445 } else {
3446 lp->timeout = -1;
3447 }
3448
3449 return 0;
3450 }
3451
3452 /*
3453 **
3454 **
3455 */
3456 static int
3457 test_mii_reg(struct net_device *dev, int reg, int mask, bool pol, long msec)
3458 {
3459 struct de4x5_private *lp = netdev_priv(dev);
3460 int test;
3461 u_long iobase = dev->base_addr;
3462
3463 if (lp->timeout < 0) {
3464 lp->timeout = msec/100;
3465 }
3466
3467 reg = mii_rd((u_char)reg, lp->phy[lp->active].addr, DE4X5_MII) & mask;
3468 test = (reg ^ (pol ? ~0 : 0)) & mask;
3469
3470 if (test && --lp->timeout) {
3471 reg = 100 | TIMER_CB;
3472 } else {
3473 lp->timeout = -1;
3474 }
3475
3476 return reg;
3477 }
3478
3479 static int
3480 is_spd_100(struct net_device *dev)
3481 {
3482 struct de4x5_private *lp = netdev_priv(dev);
3483 u_long iobase = dev->base_addr;
3484 int spd;
3485
3486 if (lp->useMII) {
3487 spd = mii_rd(lp->phy[lp->active].spd.reg, lp->phy[lp->active].addr, DE4X5_MII);
3488 spd = ~(spd ^ lp->phy[lp->active].spd.value);
3489 spd &= lp->phy[lp->active].spd.mask;
3490 } else if (!lp->useSROM) { /* de500-xa */
3491 spd = ((~gep_rd(dev)) & GEP_SLNK);
3492 } else {
3493 if ((lp->ibn == 2) || !lp->asBitValid)
3494 return ((lp->chipset == DC21143)?(~inl(DE4X5_SISR)&SISR_LS100):0);
3495
3496 spd = (lp->asBitValid & (lp->asPolarity ^ (gep_rd(dev) & lp->asBit))) |
3497 (lp->linkOK & ~lp->asBitValid);
3498 }
3499
3500 return spd;
3501 }
3502
3503 static int
3504 is_100_up(struct net_device *dev)
3505 {
3506 struct de4x5_private *lp = netdev_priv(dev);
3507 u_long iobase = dev->base_addr;
3508
3509 if (lp->useMII) {
3510 /* Double read for sticky bits & temporary drops */
3511 mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII);
3512 return (mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII) & MII_SR_LKS);
3513 } else if (!lp->useSROM) { /* de500-xa */
3514 return ((~gep_rd(dev)) & GEP_SLNK);
3515 } else {
3516 if ((lp->ibn == 2) || !lp->asBitValid)
3517 return ((lp->chipset == DC21143)?(~inl(DE4X5_SISR)&SISR_LS100):0);
3518
3519 return ((lp->asBitValid&(lp->asPolarity^(gep_rd(dev)&lp->asBit))) |
3520 (lp->linkOK & ~lp->asBitValid));
3521 }
3522 }
3523
3524 static int
3525 is_10_up(struct net_device *dev)
3526 {
3527 struct de4x5_private *lp = netdev_priv(dev);
3528 u_long iobase = dev->base_addr;
3529
3530 if (lp->useMII) {
3531 /* Double read for sticky bits & temporary drops */
3532 mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII);
3533 return (mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII) & MII_SR_LKS);
3534 } else if (!lp->useSROM) { /* de500-xa */
3535 return ((~gep_rd(dev)) & GEP_LNP);
3536 } else {
3537 if ((lp->ibn == 2) || !lp->asBitValid)
3538 return (((lp->chipset & ~0x00ff) == DC2114x) ?
3539 (~inl(DE4X5_SISR)&SISR_LS10):
3540 0);
3541
3542 return ((lp->asBitValid&(lp->asPolarity^(gep_rd(dev)&lp->asBit))) |
3543 (lp->linkOK & ~lp->asBitValid));
3544 }
3545 }
3546
3547 static int
3548 is_anc_capable(struct net_device *dev)
3549 {
3550 struct de4x5_private *lp = netdev_priv(dev);
3551 u_long iobase = dev->base_addr;
3552
3553 if (lp->phy[lp->active].id && (!lp->useSROM || lp->useMII)) {
3554 return (mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII));
3555 } else if ((lp->chipset & ~0x00ff) == DC2114x) {
3556 return (inl(DE4X5_SISR) & SISR_LPN) >> 12;
3557 } else {
3558 return 0;
3559 }
3560 }
3561
3562 /*
3563 ** Send a packet onto the media and watch for send errors that indicate the
3564 ** media is bad or unconnected.
3565 */
3566 static int
3567 ping_media(struct net_device *dev, int msec)
3568 {
3569 struct de4x5_private *lp = netdev_priv(dev);
3570 u_long iobase = dev->base_addr;
3571 int sisr;
3572
3573 if (lp->timeout < 0) {
3574 lp->timeout = msec/100;
3575
3576 lp->tmp = lp->tx_new; /* Remember the ring position */
3577 load_packet(dev, lp->frame, TD_LS | TD_FS | sizeof(lp->frame), (struct sk_buff *)1);
3578 lp->tx_new = (++lp->tx_new) % lp->txRingSize;
3579 outl(POLL_DEMAND, DE4X5_TPD);
3580 }
3581
3582 sisr = inl(DE4X5_SISR);
3583
3584 if ((!(sisr & SISR_NCR)) &&
3585 ((s32)le32_to_cpu(lp->tx_ring[lp->tmp].status) < 0) &&
3586 (--lp->timeout)) {
3587 sisr = 100 | TIMER_CB;
3588 } else {
3589 if ((!(sisr & SISR_NCR)) &&
3590 !(le32_to_cpu(lp->tx_ring[lp->tmp].status) & (T_OWN | TD_ES)) &&
3591 lp->timeout) {
3592 sisr = 0;
3593 } else {
3594 sisr = 1;
3595 }
3596 lp->timeout = -1;
3597 }
3598
3599 return sisr;
3600 }
3601
3602 /*
3603 ** This function does 2 things: on Intels it kmalloc's another buffer to
3604 ** replace the one about to be passed up. On Alpha's it kmallocs a buffer
3605 ** into which the packet is copied.
3606 */
3607 static struct sk_buff *
3608 de4x5_alloc_rx_buff(struct net_device *dev, int index, int len)
3609 {
3610 struct de4x5_private *lp = netdev_priv(dev);
3611 struct sk_buff *p;
3612
3613 #if !defined(__alpha__) && !defined(__powerpc__) && !defined(CONFIG_SPARC) && !defined(DE4X5_DO_MEMCPY)
3614 struct sk_buff *ret;
3615 u_long i=0, tmp;
3616
3617 p = dev_alloc_skb(IEEE802_3_SZ + DE4X5_ALIGN + 2);
3618 if (!p) return NULL;
3619
3620 tmp = virt_to_bus(p->data);
3621 i = ((tmp + DE4X5_ALIGN) & ~DE4X5_ALIGN) - tmp;
3622 skb_reserve(p, i);
3623 lp->rx_ring[index].buf = cpu_to_le32(tmp + i);
3624
3625 ret = lp->rx_skb[index];
3626 lp->rx_skb[index] = p;
3627
3628 if ((u_long) ret > 1) {
3629 skb_put(ret, len);
3630 }
3631
3632 return ret;
3633
3634 #else
3635 if (lp->state != OPEN) return (struct sk_buff *)1; /* Fake out the open */
3636
3637 p = dev_alloc_skb(len + 2);
3638 if (!p) return NULL;
3639
3640 skb_reserve(p, 2); /* Align */
3641 if (index < lp->rx_old) { /* Wrapped buffer */
3642 short tlen = (lp->rxRingSize - lp->rx_old) * RX_BUFF_SZ;
3643 memcpy(skb_put(p,tlen),lp->rx_bufs + lp->rx_old * RX_BUFF_SZ,tlen);
3644 memcpy(skb_put(p,len-tlen),lp->rx_bufs,len-tlen);
3645 } else { /* Linear buffer */
3646 memcpy(skb_put(p,len),lp->rx_bufs + lp->rx_old * RX_BUFF_SZ,len);
3647 }
3648
3649 return p;
3650 #endif
3651 }
3652
3653 static void
3654 de4x5_free_rx_buffs(struct net_device *dev)
3655 {
3656 struct de4x5_private *lp = netdev_priv(dev);
3657 int i;
3658
3659 for (i=0; i<lp->rxRingSize; i++) {
3660 if ((u_long) lp->rx_skb[i] > 1) {
3661 dev_kfree_skb(lp->rx_skb[i]);
3662 }
3663 lp->rx_ring[i].status = 0;
3664 lp->rx_skb[i] = (struct sk_buff *)1; /* Dummy entry */
3665 }
3666
3667 return;
3668 }
3669
3670 static void
3671 de4x5_free_tx_buffs(struct net_device *dev)
3672 {
3673 struct de4x5_private *lp = netdev_priv(dev);
3674 int i;
3675
3676 for (i=0; i<lp->txRingSize; i++) {
3677 if (lp->tx_skb[i])
3678 de4x5_free_tx_buff(lp, i);
3679 lp->tx_ring[i].status = 0;
3680 }
3681
3682 /* Unload the locally queued packets */
3683 while (lp->cache.skb) {
3684 dev_kfree_skb(de4x5_get_cache(dev));
3685 }
3686
3687 return;
3688 }
3689
3690 /*
3691 ** When a user pulls a connection, the DECchip can end up in a
3692 ** 'running - waiting for end of transmission' state. This means that we
3693 ** have to perform a chip soft reset to ensure that we can synchronize
3694 ** the hardware and software and make any media probes using a loopback
3695 ** packet meaningful.
3696 */
3697 static void
3698 de4x5_save_skbs(struct net_device *dev)
3699 {
3700 struct de4x5_private *lp = netdev_priv(dev);
3701 u_long iobase = dev->base_addr;
3702 s32 omr;
3703
3704 if (!lp->cache.save_cnt) {
3705 STOP_DE4X5;
3706 de4x5_tx(dev); /* Flush any sent skb's */
3707 de4x5_free_tx_buffs(dev);
3708 de4x5_cache_state(dev, DE4X5_SAVE_STATE);
3709 de4x5_sw_reset(dev);
3710 de4x5_cache_state(dev, DE4X5_RESTORE_STATE);
3711 lp->cache.save_cnt++;
3712 START_DE4X5;
3713 }
3714
3715 return;
3716 }
3717
3718 static void
3719 de4x5_rst_desc_ring(struct net_device *dev)
3720 {
3721 struct de4x5_private *lp = netdev_priv(dev);
3722 u_long iobase = dev->base_addr;
3723 int i;
3724 s32 omr;
3725
3726 if (lp->cache.save_cnt) {
3727 STOP_DE4X5;
3728 outl(lp->dma_rings, DE4X5_RRBA);
3729 outl(lp->dma_rings + NUM_RX_DESC * sizeof(struct de4x5_desc),
3730 DE4X5_TRBA);
3731
3732 lp->rx_new = lp->rx_old = 0;
3733 lp->tx_new = lp->tx_old = 0;
3734
3735 for (i = 0; i < lp->rxRingSize; i++) {
3736 lp->rx_ring[i].status = cpu_to_le32(R_OWN);
3737 }
3738
3739 for (i = 0; i < lp->txRingSize; i++) {
3740 lp->tx_ring[i].status = cpu_to_le32(0);
3741 }
3742
3743 barrier();
3744 lp->cache.save_cnt--;
3745 START_DE4X5;
3746 }
3747
3748 return;
3749 }
3750
3751 static void
3752 de4x5_cache_state(struct net_device *dev, int flag)
3753 {
3754 struct de4x5_private *lp = netdev_priv(dev);
3755 u_long iobase = dev->base_addr;
3756
3757 switch(flag) {
3758 case DE4X5_SAVE_STATE:
3759 lp->cache.csr0 = inl(DE4X5_BMR);
3760 lp->cache.csr6 = (inl(DE4X5_OMR) & ~(OMR_ST | OMR_SR));
3761 lp->cache.csr7 = inl(DE4X5_IMR);
3762 break;
3763
3764 case DE4X5_RESTORE_STATE:
3765 outl(lp->cache.csr0, DE4X5_BMR);
3766 outl(lp->cache.csr6, DE4X5_OMR);
3767 outl(lp->cache.csr7, DE4X5_IMR);
3768 if (lp->chipset == DC21140) {
3769 gep_wr(lp->cache.gepc, dev);
3770 gep_wr(lp->cache.gep, dev);
3771 } else {
3772 reset_init_sia(dev, lp->cache.csr13, lp->cache.csr14,
3773 lp->cache.csr15);
3774 }
3775 break;
3776 }
3777
3778 return;
3779 }
3780
3781 static void
3782 de4x5_put_cache(struct net_device *dev, struct sk_buff *skb)
3783 {
3784 struct de4x5_private *lp = netdev_priv(dev);
3785 struct sk_buff *p;
3786
3787 if (lp->cache.skb) {
3788 for (p=lp->cache.skb; p->next; p=p->next);
3789 p->next = skb;
3790 } else {
3791 lp->cache.skb = skb;
3792 }
3793 skb->next = NULL;
3794
3795 return;
3796 }
3797
3798 static void
3799 de4x5_putb_cache(struct net_device *dev, struct sk_buff *skb)
3800 {
3801 struct de4x5_private *lp = netdev_priv(dev);
3802 struct sk_buff *p = lp->cache.skb;
3803
3804 lp->cache.skb = skb;
3805 skb->next = p;
3806
3807 return;
3808 }
3809
3810 static struct sk_buff *
3811 de4x5_get_cache(struct net_device *dev)
3812 {
3813 struct de4x5_private *lp = netdev_priv(dev);
3814 struct sk_buff *p = lp->cache.skb;
3815
3816 if (p) {
3817 lp->cache.skb = p->next;
3818 p->next = NULL;
3819 }
3820
3821 return p;
3822 }
3823
3824 /*
3825 ** Check the Auto Negotiation State. Return OK when a link pass interrupt
3826 ** is received and the auto-negotiation status is NWAY OK.
3827 */
3828 static int
3829 test_ans(struct net_device *dev, s32 irqs, s32 irq_mask, s32 msec)
3830 {
3831 struct de4x5_private *lp = netdev_priv(dev);
3832 u_long iobase = dev->base_addr;
3833 s32 sts, ans;
3834
3835 if (lp->timeout < 0) {
3836 lp->timeout = msec/100;
3837 outl(irq_mask, DE4X5_IMR);
3838
3839 /* clear all pending interrupts */
3840 sts = inl(DE4X5_STS);
3841 outl(sts, DE4X5_STS);
3842 }
3843
3844 ans = inl(DE4X5_SISR) & SISR_ANS;
3845 sts = inl(DE4X5_STS) & ~TIMER_CB;
3846
3847 if (!(sts & irqs) && (ans ^ ANS_NWOK) && --lp->timeout) {
3848 sts = 100 | TIMER_CB;
3849 } else {
3850 lp->timeout = -1;
3851 }
3852
3853 return sts;
3854 }
3855
3856 static void
3857 de4x5_setup_intr(struct net_device *dev)
3858 {
3859 struct de4x5_private *lp = netdev_priv(dev);
3860 u_long iobase = dev->base_addr;
3861 s32 imr, sts;
3862
3863 if (inl(DE4X5_OMR) & OMR_SR) { /* Only unmask if TX/RX is enabled */
3864 imr = 0;
3865 UNMASK_IRQs;
3866 sts = inl(DE4X5_STS); /* Reset any pending (stale) interrupts */
3867 outl(sts, DE4X5_STS);
3868 ENABLE_IRQs;
3869 }
3870
3871 return;
3872 }
3873
3874 /*
3875 **
3876 */
3877 static void
3878 reset_init_sia(struct net_device *dev, s32 csr13, s32 csr14, s32 csr15)
3879 {
3880 struct de4x5_private *lp = netdev_priv(dev);
3881 u_long iobase = dev->base_addr;
3882
3883 RESET_SIA;
3884 if (lp->useSROM) {
3885 if (lp->ibn == 3) {
3886 srom_exec(dev, lp->phy[lp->active].rst);
3887 srom_exec(dev, lp->phy[lp->active].gep);
3888 outl(1, DE4X5_SICR);
3889 return;
3890 } else {
3891 csr15 = lp->cache.csr15;
3892 csr14 = lp->cache.csr14;
3893 csr13 = lp->cache.csr13;
3894 outl(csr15 | lp->cache.gepc, DE4X5_SIGR);
3895 outl(csr15 | lp->cache.gep, DE4X5_SIGR);
3896 }
3897 } else {
3898 outl(csr15, DE4X5_SIGR);
3899 }
3900 outl(csr14, DE4X5_STRR);
3901 outl(csr13, DE4X5_SICR);
3902
3903 mdelay(10);
3904
3905 return;
3906 }
3907
3908 /*
3909 ** Create a loopback ethernet packet
3910 */
3911 static void
3912 create_packet(struct net_device *dev, char *frame, int len)
3913 {
3914 int i;
3915 char *buf = frame;
3916
3917 for (i=0; i<ETH_ALEN; i++) { /* Use this source address */
3918 *buf++ = dev->dev_addr[i];
3919 }
3920 for (i=0; i<ETH_ALEN; i++) { /* Use this destination address */
3921 *buf++ = dev->dev_addr[i];
3922 }
3923
3924 *buf++ = 0; /* Packet length (2 bytes) */
3925 *buf++ = 1;
3926
3927 return;
3928 }
3929
3930 /*
3931 ** Look for a particular board name in the EISA configuration space
3932 */
3933 static int
3934 EISA_signature(char *name, struct device *device)
3935 {
3936 int i, status = 0, siglen = ARRAY_SIZE(de4x5_signatures);
3937 struct eisa_device *edev;
3938
3939 *name = '\0';
3940 edev = to_eisa_device (device);
3941 i = edev->id.driver_data;
3942
3943 if (i >= 0 && i < siglen) {
3944 strcpy (name, de4x5_signatures[i]);
3945 status = 1;
3946 }
3947
3948 return status; /* return the device name string */
3949 }
3950
3951 /*
3952 ** Look for a particular board name in the PCI configuration space
3953 */
3954 static int
3955 PCI_signature(char *name, struct de4x5_private *lp)
3956 {
3957 int i, status = 0, siglen = ARRAY_SIZE(de4x5_signatures);
3958
3959 if (lp->chipset == DC21040) {
3960 strcpy(name, "DE434/5");
3961 return status;
3962 } else { /* Search for a DEC name in the SROM */
3963 int i = *((char *)&lp->srom + 19) * 3;
3964 strncpy(name, (char *)&lp->srom + 26 + i, 8);
3965 }
3966 name[8] = '\0';
3967 for (i=0; i<siglen; i++) {
3968 if (strstr(name,de4x5_signatures[i])!=NULL) break;
3969 }
3970 if (i == siglen) {
3971 if (dec_only) {
3972 *name = '\0';
3973 } else { /* Use chip name to avoid confusion */
3974 strcpy(name, (((lp->chipset == DC21040) ? "DC21040" :
3975 ((lp->chipset == DC21041) ? "DC21041" :
3976 ((lp->chipset == DC21140) ? "DC21140" :
3977 ((lp->chipset == DC21142) ? "DC21142" :
3978 ((lp->chipset == DC21143) ? "DC21143" : "UNKNOWN"
3979 )))))));
3980 }
3981 if (lp->chipset != DC21041) {
3982 lp->useSROM = true; /* card is not recognisably DEC */
3983 }
3984 } else if ((lp->chipset & ~0x00ff) == DC2114x) {
3985 lp->useSROM = true;
3986 }
3987
3988 return status;
3989 }
3990
3991 /*
3992 ** Set up the Ethernet PROM counter to the start of the Ethernet address on
3993 ** the DC21040, else read the SROM for the other chips.
3994 ** The SROM may not be present in a multi-MAC card, so first read the
3995 ** MAC address and check for a bad address. If there is a bad one then exit
3996 ** immediately with the prior srom contents intact (the h/w address will
3997 ** be fixed up later).
3998 */
3999 static void
4000 DevicePresent(struct net_device *dev, u_long aprom_addr)
4001 {
4002 int i, j=0;
4003 struct de4x5_private *lp = netdev_priv(dev);
4004
4005 if (lp->chipset == DC21040) {
4006 if (lp->bus == EISA) {
4007 enet_addr_rst(aprom_addr); /* Reset Ethernet Address ROM Pointer */
4008 } else {
4009 outl(0, aprom_addr); /* Reset Ethernet Address ROM Pointer */
4010 }
4011 } else { /* Read new srom */
4012 u_short tmp;
4013 __le16 *p = (__le16 *)((char *)&lp->srom + SROM_HWADD);
4014 for (i=0; i<(ETH_ALEN>>1); i++) {
4015 tmp = srom_rd(aprom_addr, (SROM_HWADD>>1) + i);
4016 j += tmp; /* for check for 0:0:0:0:0:0 or ff:ff:ff:ff:ff:ff */
4017 *p = cpu_to_le16(tmp);
4018 }
4019 if (j == 0 || j == 3 * 0xffff) {
4020 /* could get 0 only from all-0 and 3 * 0xffff only from all-1 */
4021 return;
4022 }
4023
4024 p = (__le16 *)&lp->srom;
4025 for (i=0; i<(sizeof(struct de4x5_srom)>>1); i++) {
4026 tmp = srom_rd(aprom_addr, i);
4027 *p++ = cpu_to_le16(tmp);
4028 }
4029 de4x5_dbg_srom((struct de4x5_srom *)&lp->srom);
4030 }
4031
4032 return;
4033 }
4034
4035 /*
4036 ** Since the write on the Enet PROM register doesn't seem to reset the PROM
4037 ** pointer correctly (at least on my DE425 EISA card), this routine should do
4038 ** it...from depca.c.
4039 */
4040 static void
4041 enet_addr_rst(u_long aprom_addr)
4042 {
4043 union {
4044 struct {
4045 u32 a;
4046 u32 b;
4047 } llsig;
4048 char Sig[sizeof(u32) << 1];
4049 } dev;
4050 short sigLength=0;
4051 s8 data;
4052 int i, j;
4053
4054 dev.llsig.a = ETH_PROM_SIG;
4055 dev.llsig.b = ETH_PROM_SIG;
4056 sigLength = sizeof(u32) << 1;
4057
4058 for (i=0,j=0;j<sigLength && i<PROBE_LENGTH+sigLength-1;i++) {
4059 data = inb(aprom_addr);
4060 if (dev.Sig[j] == data) { /* track signature */
4061 j++;
4062 } else { /* lost signature; begin search again */
4063 if (data == dev.Sig[0]) { /* rare case.... */
4064 j=1;
4065 } else {
4066 j=0;
4067 }
4068 }
4069 }
4070
4071 return;
4072 }
4073
4074 /*
4075 ** For the bad status case and no SROM, then add one to the previous
4076 ** address. However, need to add one backwards in case we have 0xff
4077 ** as one or more of the bytes. Only the last 3 bytes should be checked
4078 ** as the first three are invariant - assigned to an organisation.
4079 */
4080 static int
4081 get_hw_addr(struct net_device *dev)
4082 {
4083 u_long iobase = dev->base_addr;
4084 int broken, i, k, tmp, status = 0;
4085 u_short j,chksum;
4086 struct de4x5_private *lp = netdev_priv(dev);
4087
4088 broken = de4x5_bad_srom(lp);
4089
4090 for (i=0,k=0,j=0;j<3;j++) {
4091 k <<= 1;
4092 if (k > 0xffff) k-=0xffff;
4093
4094 if (lp->bus == PCI) {
4095 if (lp->chipset == DC21040) {
4096 while ((tmp = inl(DE4X5_APROM)) < 0);
4097 k += (u_char) tmp;
4098 dev->dev_addr[i++] = (u_char) tmp;
4099 while ((tmp = inl(DE4X5_APROM)) < 0);
4100 k += (u_short) (tmp << 8);
4101 dev->dev_addr[i++] = (u_char) tmp;
4102 } else if (!broken) {
4103 dev->dev_addr[i] = (u_char) lp->srom.ieee_addr[i]; i++;
4104 dev->dev_addr[i] = (u_char) lp->srom.ieee_addr[i]; i++;
4105 } else if ((broken == SMC) || (broken == ACCTON)) {
4106 dev->dev_addr[i] = *((u_char *)&lp->srom + i); i++;
4107 dev->dev_addr[i] = *((u_char *)&lp->srom + i); i++;
4108 }
4109 } else {
4110 k += (u_char) (tmp = inb(EISA_APROM));
4111 dev->dev_addr[i++] = (u_char) tmp;
4112 k += (u_short) ((tmp = inb(EISA_APROM)) << 8);
4113 dev->dev_addr[i++] = (u_char) tmp;
4114 }
4115
4116 if (k > 0xffff) k-=0xffff;
4117 }
4118 if (k == 0xffff) k=0;
4119
4120 if (lp->bus == PCI) {
4121 if (lp->chipset == DC21040) {
4122 while ((tmp = inl(DE4X5_APROM)) < 0);
4123 chksum = (u_char) tmp;
4124 while ((tmp = inl(DE4X5_APROM)) < 0);
4125 chksum |= (u_short) (tmp << 8);
4126 if ((k != chksum) && (dec_only)) status = -1;
4127 }
4128 } else {
4129 chksum = (u_char) inb(EISA_APROM);
4130 chksum |= (u_short) (inb(EISA_APROM) << 8);
4131 if ((k != chksum) && (dec_only)) status = -1;
4132 }
4133
4134 /* If possible, try to fix a broken card - SMC only so far */
4135 srom_repair(dev, broken);
4136
4137 #ifdef CONFIG_PPC_PMAC
4138 /*
4139 ** If the address starts with 00 a0, we have to bit-reverse
4140 ** each byte of the address.
4141 */
4142 if ( machine_is(powermac) &&
4143 (dev->dev_addr[0] == 0) &&
4144 (dev->dev_addr[1] == 0xa0) )
4145 {
4146 for (i = 0; i < ETH_ALEN; ++i)
4147 {
4148 int x = dev->dev_addr[i];
4149 x = ((x & 0xf) << 4) + ((x & 0xf0) >> 4);
4150 x = ((x & 0x33) << 2) + ((x & 0xcc) >> 2);
4151 dev->dev_addr[i] = ((x & 0x55) << 1) + ((x & 0xaa) >> 1);
4152 }
4153 }
4154 #endif /* CONFIG_PPC_PMAC */
4155
4156 /* Test for a bad enet address */
4157 status = test_bad_enet(dev, status);
4158
4159 return status;
4160 }
4161
4162 /*
4163 ** Test for enet addresses in the first 32 bytes. The built-in strncmp
4164 ** didn't seem to work here...?
4165 */
4166 static int
4167 de4x5_bad_srom(struct de4x5_private *lp)
4168 {
4169 int i, status = 0;
4170
4171 for (i = 0; i < ARRAY_SIZE(enet_det); i++) {
4172 if (!de4x5_strncmp((char *)&lp->srom, (char *)&enet_det[i], 3) &&
4173 !de4x5_strncmp((char *)&lp->srom+0x10, (char *)&enet_det[i], 3)) {
4174 if (i == 0) {
4175 status = SMC;
4176 } else if (i == 1) {
4177 status = ACCTON;
4178 }
4179 break;
4180 }
4181 }
4182
4183 return status;
4184 }
4185
4186 static int
4187 de4x5_strncmp(char *a, char *b, int n)
4188 {
4189 int ret=0;
4190
4191 for (;n && !ret; n--) {
4192 ret = *a++ - *b++;
4193 }
4194
4195 return ret;
4196 }
4197
4198 static void
4199 srom_repair(struct net_device *dev, int card)
4200 {
4201 struct de4x5_private *lp = netdev_priv(dev);
4202
4203 switch(card) {
4204 case SMC:
4205 memset((char *)&lp->srom, 0, sizeof(struct de4x5_srom));
4206 memcpy(lp->srom.ieee_addr, (char *)dev->dev_addr, ETH_ALEN);
4207 memcpy(lp->srom.info, (char *)&srom_repair_info[SMC-1], 100);
4208 lp->useSROM = true;
4209 break;
4210 }
4211
4212 return;
4213 }
4214
4215 /*
4216 ** Assume that the irq's do not follow the PCI spec - this is seems
4217 ** to be true so far (2 for 2).
4218 */
4219 static int
4220 test_bad_enet(struct net_device *dev, int status)
4221 {
4222 struct de4x5_private *lp = netdev_priv(dev);
4223 int i, tmp;
4224
4225 for (tmp=0,i=0; i<ETH_ALEN; i++) tmp += (u_char)dev->dev_addr[i];
4226 if ((tmp == 0) || (tmp == 0x5fa)) {
4227 if ((lp->chipset == last.chipset) &&
4228 (lp->bus_num == last.bus) && (lp->bus_num > 0)) {
4229 for (i=0; i<ETH_ALEN; i++) dev->dev_addr[i] = last.addr[i];
4230 for (i=ETH_ALEN-1; i>2; --i) {
4231 dev->dev_addr[i] += 1;
4232 if (dev->dev_addr[i] != 0) break;
4233 }
4234 for (i=0; i<ETH_ALEN; i++) last.addr[i] = dev->dev_addr[i];
4235 if (!an_exception(lp)) {
4236 dev->irq = last.irq;
4237 }
4238
4239 status = 0;
4240 }
4241 } else if (!status) {
4242 last.chipset = lp->chipset;
4243 last.bus = lp->bus_num;
4244 last.irq = dev->irq;
4245 for (i=0; i<ETH_ALEN; i++) last.addr[i] = dev->dev_addr[i];
4246 }
4247
4248 return status;
4249 }
4250
4251 /*
4252 ** List of board exceptions with correctly wired IRQs
4253 */
4254 static int
4255 an_exception(struct de4x5_private *lp)
4256 {
4257 if ((*(u_short *)lp->srom.sub_vendor_id == 0x00c0) &&
4258 (*(u_short *)lp->srom.sub_system_id == 0x95e0)) {
4259 return -1;
4260 }
4261
4262 return 0;
4263 }
4264
4265 /*
4266 ** SROM Read
4267 */
4268 static short
4269 srom_rd(u_long addr, u_char offset)
4270 {
4271 sendto_srom(SROM_RD | SROM_SR, addr);
4272
4273 srom_latch(SROM_RD | SROM_SR | DT_CS, addr);
4274 srom_command(SROM_RD | SROM_SR | DT_IN | DT_CS, addr);
4275 srom_address(SROM_RD | SROM_SR | DT_CS, addr, offset);
4276
4277 return srom_data(SROM_RD | SROM_SR | DT_CS, addr);
4278 }
4279
4280 static void
4281 srom_latch(u_int command, u_long addr)
4282 {
4283 sendto_srom(command, addr);
4284 sendto_srom(command | DT_CLK, addr);
4285 sendto_srom(command, addr);
4286
4287 return;
4288 }
4289
4290 static void
4291 srom_command(u_int command, u_long addr)
4292 {
4293 srom_latch(command, addr);
4294 srom_latch(command, addr);
4295 srom_latch((command & 0x0000ff00) | DT_CS, addr);
4296
4297 return;
4298 }
4299
4300 static void
4301 srom_address(u_int command, u_long addr, u_char offset)
4302 {
4303 int i, a;
4304
4305 a = offset << 2;
4306 for (i=0; i<6; i++, a <<= 1) {
4307 srom_latch(command | ((a & 0x80) ? DT_IN : 0), addr);
4308 }
4309 udelay(1);
4310
4311 i = (getfrom_srom(addr) >> 3) & 0x01;
4312
4313 return;
4314 }
4315
4316 static short
4317 srom_data(u_int command, u_long addr)
4318 {
4319 int i;
4320 short word = 0;
4321 s32 tmp;
4322
4323 for (i=0; i<16; i++) {
4324 sendto_srom(command | DT_CLK, addr);
4325 tmp = getfrom_srom(addr);
4326 sendto_srom(command, addr);
4327
4328 word = (word << 1) | ((tmp >> 3) & 0x01);
4329 }
4330
4331 sendto_srom(command & 0x0000ff00, addr);
4332
4333 return word;
4334 }
4335
4336 /*
4337 static void
4338 srom_busy(u_int command, u_long addr)
4339 {
4340 sendto_srom((command & 0x0000ff00) | DT_CS, addr);
4341
4342 while (!((getfrom_srom(addr) >> 3) & 0x01)) {
4343 mdelay(1);
4344 }
4345
4346 sendto_srom(command & 0x0000ff00, addr);
4347
4348 return;
4349 }
4350 */
4351
4352 static void
4353 sendto_srom(u_int command, u_long addr)
4354 {
4355 outl(command, addr);
4356 udelay(1);
4357
4358 return;
4359 }
4360
4361 static int
4362 getfrom_srom(u_long addr)
4363 {
4364 s32 tmp;
4365
4366 tmp = inl(addr);
4367 udelay(1);
4368
4369 return tmp;
4370 }
4371
4372 static int
4373 srom_infoleaf_info(struct net_device *dev)
4374 {
4375 struct de4x5_private *lp = netdev_priv(dev);
4376 int i, count;
4377 u_char *p;
4378
4379 /* Find the infoleaf decoder function that matches this chipset */
4380 for (i=0; i<INFOLEAF_SIZE; i++) {
4381 if (lp->chipset == infoleaf_array[i].chipset) break;
4382 }
4383 if (i == INFOLEAF_SIZE) {
4384 lp->useSROM = false;
4385 printk("%s: Cannot find correct chipset for SROM decoding!\n",
4386 dev->name);
4387 return -ENXIO;
4388 }
4389
4390 lp->infoleaf_fn = infoleaf_array[i].fn;
4391
4392 /* Find the information offset that this function should use */
4393 count = *((u_char *)&lp->srom + 19);
4394 p = (u_char *)&lp->srom + 26;
4395
4396 if (count > 1) {
4397 for (i=count; i; --i, p+=3) {
4398 if (lp->device == *p) break;
4399 }
4400 if (i == 0) {
4401 lp->useSROM = false;
4402 printk("%s: Cannot find correct PCI device [%d] for SROM decoding!\n",
4403 dev->name, lp->device);
4404 return -ENXIO;
4405 }
4406 }
4407
4408 lp->infoleaf_offset = TWIDDLE(p+1);
4409
4410 return 0;
4411 }
4412
4413 /*
4414 ** This routine loads any type 1 or 3 MII info into the mii device
4415 ** struct and executes any type 5 code to reset PHY devices for this
4416 ** controller.
4417 ** The info for the MII devices will be valid since the index used
4418 ** will follow the discovery process from MII address 1-31 then 0.
4419 */
4420 static void
4421 srom_init(struct net_device *dev)
4422 {
4423 struct de4x5_private *lp = netdev_priv(dev);
4424 u_char *p = (u_char *)&lp->srom + lp->infoleaf_offset;
4425 u_char count;
4426
4427 p+=2;
4428 if (lp->chipset == DC21140) {
4429 lp->cache.gepc = (*p++ | GEP_CTRL);
4430 gep_wr(lp->cache.gepc, dev);
4431 }
4432
4433 /* Block count */
4434 count = *p++;
4435
4436 /* Jump the infoblocks to find types */
4437 for (;count; --count) {
4438 if (*p < 128) {
4439 p += COMPACT_LEN;
4440 } else if (*(p+1) == 5) {
4441 type5_infoblock(dev, 1, p);
4442 p += ((*p & BLOCK_LEN) + 1);
4443 } else if (*(p+1) == 4) {
4444 p += ((*p & BLOCK_LEN) + 1);
4445 } else if (*(p+1) == 3) {
4446 type3_infoblock(dev, 1, p);
4447 p += ((*p & BLOCK_LEN) + 1);
4448 } else if (*(p+1) == 2) {
4449 p += ((*p & BLOCK_LEN) + 1);
4450 } else if (*(p+1) == 1) {
4451 type1_infoblock(dev, 1, p);
4452 p += ((*p & BLOCK_LEN) + 1);
4453 } else {
4454 p += ((*p & BLOCK_LEN) + 1);
4455 }
4456 }
4457
4458 return;
4459 }
4460
4461 /*
4462 ** A generic routine that writes GEP control, data and reset information
4463 ** to the GEP register (21140) or csr15 GEP portion (2114[23]).
4464 */
4465 static void
4466 srom_exec(struct net_device *dev, u_char *p)
4467 {
4468 struct de4x5_private *lp = netdev_priv(dev);
4469 u_long iobase = dev->base_addr;
4470 u_char count = (p ? *p++ : 0);
4471 u_short *w = (u_short *)p;
4472
4473 if (((lp->ibn != 1) && (lp->ibn != 3) && (lp->ibn != 5)) || !count) return;
4474
4475 if (lp->chipset != DC21140) RESET_SIA;
4476
4477 while (count--) {
4478 gep_wr(((lp->chipset==DC21140) && (lp->ibn!=5) ?
4479 *p++ : TWIDDLE(w++)), dev);
4480 mdelay(2); /* 2ms per action */
4481 }
4482
4483 if (lp->chipset != DC21140) {
4484 outl(lp->cache.csr14, DE4X5_STRR);
4485 outl(lp->cache.csr13, DE4X5_SICR);
4486 }
4487
4488 return;
4489 }
4490
4491 /*
4492 ** Basically this function is a NOP since it will never be called,
4493 ** unless I implement the DC21041 SROM functions. There's no need
4494 ** since the existing code will be satisfactory for all boards.
4495 */
4496 static int
4497 dc21041_infoleaf(struct net_device *dev)
4498 {
4499 return DE4X5_AUTOSENSE_MS;
4500 }
4501
4502 static int
4503 dc21140_infoleaf(struct net_device *dev)
4504 {
4505 struct de4x5_private *lp = netdev_priv(dev);
4506 u_char count = 0;
4507 u_char *p = (u_char *)&lp->srom + lp->infoleaf_offset;
4508 int next_tick = DE4X5_AUTOSENSE_MS;
4509
4510 /* Read the connection type */
4511 p+=2;
4512
4513 /* GEP control */
4514 lp->cache.gepc = (*p++ | GEP_CTRL);
4515
4516 /* Block count */
4517 count = *p++;
4518
4519 /* Recursively figure out the info blocks */
4520 if (*p < 128) {
4521 next_tick = dc_infoblock[COMPACT](dev, count, p);
4522 } else {
4523 next_tick = dc_infoblock[*(p+1)](dev, count, p);
4524 }
4525
4526 if (lp->tcount == count) {
4527 lp->media = NC;
4528 if (lp->media != lp->c_media) {
4529 de4x5_dbg_media(dev);
4530 lp->c_media = lp->media;
4531 }
4532 lp->media = INIT;
4533 lp->tcount = 0;
4534 lp->tx_enable = false;
4535 }
4536
4537 return next_tick & ~TIMER_CB;
4538 }
4539
4540 static int
4541 dc21142_infoleaf(struct net_device *dev)
4542 {
4543 struct de4x5_private *lp = netdev_priv(dev);
4544 u_char count = 0;
4545 u_char *p = (u_char *)&lp->srom + lp->infoleaf_offset;
4546 int next_tick = DE4X5_AUTOSENSE_MS;
4547
4548 /* Read the connection type */
4549 p+=2;
4550
4551 /* Block count */
4552 count = *p++;
4553
4554 /* Recursively figure out the info blocks */
4555 if (*p < 128) {
4556 next_tick = dc_infoblock[COMPACT](dev, count, p);
4557 } else {
4558 next_tick = dc_infoblock[*(p+1)](dev, count, p);
4559 }
4560
4561 if (lp->tcount == count) {
4562 lp->media = NC;
4563 if (lp->media != lp->c_media) {
4564 de4x5_dbg_media(dev);
4565 lp->c_media = lp->media;
4566 }
4567 lp->media = INIT;
4568 lp->tcount = 0;
4569 lp->tx_enable = false;
4570 }
4571
4572 return next_tick & ~TIMER_CB;
4573 }
4574
4575 static int
4576 dc21143_infoleaf(struct net_device *dev)
4577 {
4578 struct de4x5_private *lp = netdev_priv(dev);
4579 u_char count = 0;
4580 u_char *p = (u_char *)&lp->srom + lp->infoleaf_offset;
4581 int next_tick = DE4X5_AUTOSENSE_MS;
4582
4583 /* Read the connection type */
4584 p+=2;
4585
4586 /* Block count */
4587 count = *p++;
4588
4589 /* Recursively figure out the info blocks */
4590 if (*p < 128) {
4591 next_tick = dc_infoblock[COMPACT](dev, count, p);
4592 } else {
4593 next_tick = dc_infoblock[*(p+1)](dev, count, p);
4594 }
4595 if (lp->tcount == count) {
4596 lp->media = NC;
4597 if (lp->media != lp->c_media) {
4598 de4x5_dbg_media(dev);
4599 lp->c_media = lp->media;
4600 }
4601 lp->media = INIT;
4602 lp->tcount = 0;
4603 lp->tx_enable = false;
4604 }
4605
4606 return next_tick & ~TIMER_CB;
4607 }
4608
4609 /*
4610 ** The compact infoblock is only designed for DC21140[A] chips, so
4611 ** we'll reuse the dc21140m_autoconf function. Non MII media only.
4612 */
4613 static int
4614 compact_infoblock(struct net_device *dev, u_char count, u_char *p)
4615 {
4616 struct de4x5_private *lp = netdev_priv(dev);
4617 u_char flags, csr6;
4618
4619 /* Recursively figure out the info blocks */
4620 if (--count > lp->tcount) {
4621 if (*(p+COMPACT_LEN) < 128) {
4622 return dc_infoblock[COMPACT](dev, count, p+COMPACT_LEN);
4623 } else {
4624 return dc_infoblock[*(p+COMPACT_LEN+1)](dev, count, p+COMPACT_LEN);
4625 }
4626 }
4627
4628 if ((lp->media == INIT) && (lp->timeout < 0)) {
4629 lp->ibn = COMPACT;
4630 lp->active = 0;
4631 gep_wr(lp->cache.gepc, dev);
4632 lp->infoblock_media = (*p++) & COMPACT_MC;
4633 lp->cache.gep = *p++;
4634 csr6 = *p++;
4635 flags = *p++;
4636
4637 lp->asBitValid = (flags & 0x80) ? 0 : -1;
4638 lp->defMedium = (flags & 0x40) ? -1 : 0;
4639 lp->asBit = 1 << ((csr6 >> 1) & 0x07);
4640 lp->asPolarity = ((csr6 & 0x80) ? -1 : 0) & lp->asBit;
4641 lp->infoblock_csr6 = OMR_DEF | ((csr6 & 0x71) << 18);
4642 lp->useMII = false;
4643
4644 de4x5_switch_mac_port(dev);
4645 }
4646
4647 return dc21140m_autoconf(dev);
4648 }
4649
4650 /*
4651 ** This block describes non MII media for the DC21140[A] only.
4652 */
4653 static int
4654 type0_infoblock(struct net_device *dev, u_char count, u_char *p)
4655 {
4656 struct de4x5_private *lp = netdev_priv(dev);
4657 u_char flags, csr6, len = (*p & BLOCK_LEN)+1;
4658
4659 /* Recursively figure out the info blocks */
4660 if (--count > lp->tcount) {
4661 if (*(p+len) < 128) {
4662 return dc_infoblock[COMPACT](dev, count, p+len);
4663 } else {
4664 return dc_infoblock[*(p+len+1)](dev, count, p+len);
4665 }
4666 }
4667
4668 if ((lp->media == INIT) && (lp->timeout < 0)) {
4669 lp->ibn = 0;
4670 lp->active = 0;
4671 gep_wr(lp->cache.gepc, dev);
4672 p+=2;
4673 lp->infoblock_media = (*p++) & BLOCK0_MC;
4674 lp->cache.gep = *p++;
4675 csr6 = *p++;
4676 flags = *p++;
4677
4678 lp->asBitValid = (flags & 0x80) ? 0 : -1;
4679 lp->defMedium = (flags & 0x40) ? -1 : 0;
4680 lp->asBit = 1 << ((csr6 >> 1) & 0x07);
4681 lp->asPolarity = ((csr6 & 0x80) ? -1 : 0) & lp->asBit;
4682 lp->infoblock_csr6 = OMR_DEF | ((csr6 & 0x71) << 18);
4683 lp->useMII = false;
4684
4685 de4x5_switch_mac_port(dev);
4686 }
4687
4688 return dc21140m_autoconf(dev);
4689 }
4690
4691 /* These functions are under construction! */
4692
4693 static int
4694 type1_infoblock(struct net_device *dev, u_char count, u_char *p)
4695 {
4696 struct de4x5_private *lp = netdev_priv(dev);
4697 u_char len = (*p & BLOCK_LEN)+1;
4698
4699 /* Recursively figure out the info blocks */
4700 if (--count > lp->tcount) {
4701 if (*(p+len) < 128) {
4702 return dc_infoblock[COMPACT](dev, count, p+len);
4703 } else {
4704 return dc_infoblock[*(p+len+1)](dev, count, p+len);
4705 }
4706 }
4707
4708 p += 2;
4709 if (lp->state == INITIALISED) {
4710 lp->ibn = 1;
4711 lp->active = *p++;
4712 lp->phy[lp->active].gep = (*p ? p : NULL); p += (*p + 1);
4713 lp->phy[lp->active].rst = (*p ? p : NULL); p += (*p + 1);
4714 lp->phy[lp->active].mc = TWIDDLE(p); p += 2;
4715 lp->phy[lp->active].ana = TWIDDLE(p); p += 2;
4716 lp->phy[lp->active].fdx = TWIDDLE(p); p += 2;
4717 lp->phy[lp->active].ttm = TWIDDLE(p);
4718 return 0;
4719 } else if ((lp->media == INIT) && (lp->timeout < 0)) {
4720 lp->ibn = 1;
4721 lp->active = *p;
4722 lp->infoblock_csr6 = OMR_MII_100;
4723 lp->useMII = true;
4724 lp->infoblock_media = ANS;
4725
4726 de4x5_switch_mac_port(dev);
4727 }
4728
4729 return dc21140m_autoconf(dev);
4730 }
4731
4732 static int
4733 type2_infoblock(struct net_device *dev, u_char count, u_char *p)
4734 {
4735 struct de4x5_private *lp = netdev_priv(dev);
4736 u_char len = (*p & BLOCK_LEN)+1;
4737
4738 /* Recursively figure out the info blocks */
4739 if (--count > lp->tcount) {
4740 if (*(p+len) < 128) {
4741 return dc_infoblock[COMPACT](dev, count, p+len);
4742 } else {
4743 return dc_infoblock[*(p+len+1)](dev, count, p+len);
4744 }
4745 }
4746
4747 if ((lp->media == INIT) && (lp->timeout < 0)) {
4748 lp->ibn = 2;
4749 lp->active = 0;
4750 p += 2;
4751 lp->infoblock_media = (*p) & MEDIA_CODE;
4752
4753 if ((*p++) & EXT_FIELD) {
4754 lp->cache.csr13 = TWIDDLE(p); p += 2;
4755 lp->cache.csr14 = TWIDDLE(p); p += 2;
4756 lp->cache.csr15 = TWIDDLE(p); p += 2;
4757 } else {
4758 lp->cache.csr13 = CSR13;
4759 lp->cache.csr14 = CSR14;
4760 lp->cache.csr15 = CSR15;
4761 }
4762 lp->cache.gepc = ((s32)(TWIDDLE(p)) << 16); p += 2;
4763 lp->cache.gep = ((s32)(TWIDDLE(p)) << 16);
4764 lp->infoblock_csr6 = OMR_SIA;
4765 lp->useMII = false;
4766
4767 de4x5_switch_mac_port(dev);
4768 }
4769
4770 return dc2114x_autoconf(dev);
4771 }
4772
4773 static int
4774 type3_infoblock(struct net_device *dev, u_char count, u_char *p)
4775 {
4776 struct de4x5_private *lp = netdev_priv(dev);
4777 u_char len = (*p & BLOCK_LEN)+1;
4778
4779 /* Recursively figure out the info blocks */
4780 if (--count > lp->tcount) {
4781 if (*(p+len) < 128) {
4782 return dc_infoblock[COMPACT](dev, count, p+len);
4783 } else {
4784 return dc_infoblock[*(p+len+1)](dev, count, p+len);
4785 }
4786 }
4787
4788 p += 2;
4789 if (lp->state == INITIALISED) {
4790 lp->ibn = 3;
4791 lp->active = *p++;
4792 if (MOTO_SROM_BUG) lp->active = 0;
4793 lp->phy[lp->active].gep = (*p ? p : NULL); p += (2 * (*p) + 1);
4794 lp->phy[lp->active].rst = (*p ? p : NULL); p += (2 * (*p) + 1);
4795 lp->phy[lp->active].mc = TWIDDLE(p); p += 2;
4796 lp->phy[lp->active].ana = TWIDDLE(p); p += 2;
4797 lp->phy[lp->active].fdx = TWIDDLE(p); p += 2;
4798 lp->phy[lp->active].ttm = TWIDDLE(p); p += 2;
4799 lp->phy[lp->active].mci = *p;
4800 return 0;
4801 } else if ((lp->media == INIT) && (lp->timeout < 0)) {
4802 lp->ibn = 3;
4803 lp->active = *p;
4804 if (MOTO_SROM_BUG) lp->active = 0;
4805 lp->infoblock_csr6 = OMR_MII_100;
4806 lp->useMII = true;
4807 lp->infoblock_media = ANS;
4808
4809 de4x5_switch_mac_port(dev);
4810 }
4811
4812 return dc2114x_autoconf(dev);
4813 }
4814
4815 static int
4816 type4_infoblock(struct net_device *dev, u_char count, u_char *p)
4817 {
4818 struct de4x5_private *lp = netdev_priv(dev);
4819 u_char flags, csr6, len = (*p & BLOCK_LEN)+1;
4820
4821 /* Recursively figure out the info blocks */
4822 if (--count > lp->tcount) {
4823 if (*(p+len) < 128) {
4824 return dc_infoblock[COMPACT](dev, count, p+len);
4825 } else {
4826 return dc_infoblock[*(p+len+1)](dev, count, p+len);
4827 }
4828 }
4829
4830 if ((lp->media == INIT) && (lp->timeout < 0)) {
4831 lp->ibn = 4;
4832 lp->active = 0;
4833 p+=2;
4834 lp->infoblock_media = (*p++) & MEDIA_CODE;
4835 lp->cache.csr13 = CSR13; /* Hard coded defaults */
4836 lp->cache.csr14 = CSR14;
4837 lp->cache.csr15 = CSR15;
4838 lp->cache.gepc = ((s32)(TWIDDLE(p)) << 16); p += 2;
4839 lp->cache.gep = ((s32)(TWIDDLE(p)) << 16); p += 2;
4840 csr6 = *p++;
4841 flags = *p++;
4842
4843 lp->asBitValid = (flags & 0x80) ? 0 : -1;
4844 lp->defMedium = (flags & 0x40) ? -1 : 0;
4845 lp->asBit = 1 << ((csr6 >> 1) & 0x07);
4846 lp->asPolarity = ((csr6 & 0x80) ? -1 : 0) & lp->asBit;
4847 lp->infoblock_csr6 = OMR_DEF | ((csr6 & 0x71) << 18);
4848 lp->useMII = false;
4849
4850 de4x5_switch_mac_port(dev);
4851 }
4852
4853 return dc2114x_autoconf(dev);
4854 }
4855
4856 /*
4857 ** This block type provides information for resetting external devices
4858 ** (chips) through the General Purpose Register.
4859 */
4860 static int
4861 type5_infoblock(struct net_device *dev, u_char count, u_char *p)
4862 {
4863 struct de4x5_private *lp = netdev_priv(dev);
4864 u_char len = (*p & BLOCK_LEN)+1;
4865
4866 /* Recursively figure out the info blocks */
4867 if (--count > lp->tcount) {
4868 if (*(p+len) < 128) {
4869 return dc_infoblock[COMPACT](dev, count, p+len);
4870 } else {
4871 return dc_infoblock[*(p+len+1)](dev, count, p+len);
4872 }
4873 }
4874
4875 /* Must be initializing to run this code */
4876 if ((lp->state == INITIALISED) || (lp->media == INIT)) {
4877 p+=2;
4878 lp->rst = p;
4879 srom_exec(dev, lp->rst);
4880 }
4881
4882 return DE4X5_AUTOSENSE_MS;
4883 }
4884
4885 /*
4886 ** MII Read/Write
4887 */
4888
4889 static int
4890 mii_rd(u_char phyreg, u_char phyaddr, u_long ioaddr)
4891 {
4892 mii_wdata(MII_PREAMBLE, 2, ioaddr); /* Start of 34 bit preamble... */
4893 mii_wdata(MII_PREAMBLE, 32, ioaddr); /* ...continued */
4894 mii_wdata(MII_STRD, 4, ioaddr); /* SFD and Read operation */
4895 mii_address(phyaddr, ioaddr); /* PHY address to be accessed */
4896 mii_address(phyreg, ioaddr); /* PHY Register to read */
4897 mii_ta(MII_STRD, ioaddr); /* Turn around time - 2 MDC */
4898
4899 return mii_rdata(ioaddr); /* Read data */
4900 }
4901
4902 static void
4903 mii_wr(int data, u_char phyreg, u_char phyaddr, u_long ioaddr)
4904 {
4905 mii_wdata(MII_PREAMBLE, 2, ioaddr); /* Start of 34 bit preamble... */
4906 mii_wdata(MII_PREAMBLE, 32, ioaddr); /* ...continued */
4907 mii_wdata(MII_STWR, 4, ioaddr); /* SFD and Write operation */
4908 mii_address(phyaddr, ioaddr); /* PHY address to be accessed */
4909 mii_address(phyreg, ioaddr); /* PHY Register to write */
4910 mii_ta(MII_STWR, ioaddr); /* Turn around time - 2 MDC */
4911 data = mii_swap(data, 16); /* Swap data bit ordering */
4912 mii_wdata(data, 16, ioaddr); /* Write data */
4913
4914 return;
4915 }
4916
4917 static int
4918 mii_rdata(u_long ioaddr)
4919 {
4920 int i;
4921 s32 tmp = 0;
4922
4923 for (i=0; i<16; i++) {
4924 tmp <<= 1;
4925 tmp |= getfrom_mii(MII_MRD | MII_RD, ioaddr);
4926 }
4927
4928 return tmp;
4929 }
4930
4931 static void
4932 mii_wdata(int data, int len, u_long ioaddr)
4933 {
4934 int i;
4935
4936 for (i=0; i<len; i++) {
4937 sendto_mii(MII_MWR | MII_WR, data, ioaddr);
4938 data >>= 1;
4939 }
4940
4941 return;
4942 }
4943
4944 static void
4945 mii_address(u_char addr, u_long ioaddr)
4946 {
4947 int i;
4948
4949 addr = mii_swap(addr, 5);
4950 for (i=0; i<5; i++) {
4951 sendto_mii(MII_MWR | MII_WR, addr, ioaddr);
4952 addr >>= 1;
4953 }
4954
4955 return;
4956 }
4957
4958 static void
4959 mii_ta(u_long rw, u_long ioaddr)
4960 {
4961 if (rw == MII_STWR) {
4962 sendto_mii(MII_MWR | MII_WR, 1, ioaddr);
4963 sendto_mii(MII_MWR | MII_WR, 0, ioaddr);
4964 } else {
4965 getfrom_mii(MII_MRD | MII_RD, ioaddr); /* Tri-state MDIO */
4966 }
4967
4968 return;
4969 }
4970
4971 static int
4972 mii_swap(int data, int len)
4973 {
4974 int i, tmp = 0;
4975
4976 for (i=0; i<len; i++) {
4977 tmp <<= 1;
4978 tmp |= (data & 1);
4979 data >>= 1;
4980 }
4981
4982 return tmp;
4983 }
4984
4985 static void
4986 sendto_mii(u32 command, int data, u_long ioaddr)
4987 {
4988 u32 j;
4989
4990 j = (data & 1) << 17;
4991 outl(command | j, ioaddr);
4992 udelay(1);
4993 outl(command | MII_MDC | j, ioaddr);
4994 udelay(1);
4995
4996 return;
4997 }
4998
4999 static int
5000 getfrom_mii(u32 command, u_long ioaddr)
5001 {
5002 outl(command, ioaddr);
5003 udelay(1);
5004 outl(command | MII_MDC, ioaddr);
5005 udelay(1);
5006
5007 return ((inl(ioaddr) >> 19) & 1);
5008 }
5009
5010 /*
5011 ** Here's 3 ways to calculate the OUI from the ID registers.
5012 */
5013 static int
5014 mii_get_oui(u_char phyaddr, u_long ioaddr)
5015 {
5016 /*
5017 union {
5018 u_short reg;
5019 u_char breg[2];
5020 } a;
5021 int i, r2, r3, ret=0;*/
5022 int r2, r3;
5023
5024 /* Read r2 and r3 */
5025 r2 = mii_rd(MII_ID0, phyaddr, ioaddr);
5026 r3 = mii_rd(MII_ID1, phyaddr, ioaddr);
5027 /* SEEQ and Cypress way * /
5028 / * Shuffle r2 and r3 * /
5029 a.reg=0;
5030 r3 = ((r3>>10)|(r2<<6))&0x0ff;
5031 r2 = ((r2>>2)&0x3fff);
5032
5033 / * Bit reverse r3 * /
5034 for (i=0;i<8;i++) {
5035 ret<<=1;
5036 ret |= (r3&1);
5037 r3>>=1;
5038 }
5039
5040 / * Bit reverse r2 * /
5041 for (i=0;i<16;i++) {
5042 a.reg<<=1;
5043 a.reg |= (r2&1);
5044 r2>>=1;
5045 }
5046
5047 / * Swap r2 bytes * /
5048 i=a.breg[0];
5049 a.breg[0]=a.breg[1];
5050 a.breg[1]=i;
5051
5052 return ((a.reg<<8)|ret); */ /* SEEQ and Cypress way */
5053 /* return ((r2<<6)|(u_int)(r3>>10)); */ /* NATIONAL and BROADCOM way */
5054 return r2; /* (I did it) My way */
5055 }
5056
5057 /*
5058 ** The SROM spec forces us to search addresses [1-31 0]. Bummer.
5059 */
5060 static int
5061 mii_get_phy(struct net_device *dev)
5062 {
5063 struct de4x5_private *lp = netdev_priv(dev);
5064 u_long iobase = dev->base_addr;
5065 int i, j, k, n, limit=ARRAY_SIZE(phy_info);
5066 int id;
5067
5068 lp->active = 0;
5069 lp->useMII = true;
5070
5071 /* Search the MII address space for possible PHY devices */
5072 for (n=0, lp->mii_cnt=0, i=1; !((i==1) && (n==1)); i=(i+1)%DE4X5_MAX_MII) {
5073 lp->phy[lp->active].addr = i;
5074 if (i==0) n++; /* Count cycles */
5075 while (de4x5_reset_phy(dev)<0) udelay(100);/* Wait for reset */
5076 id = mii_get_oui(i, DE4X5_MII);
5077 if ((id == 0) || (id == 65535)) continue; /* Valid ID? */
5078 for (j=0; j<limit; j++) { /* Search PHY table */
5079 if (id != phy_info[j].id) continue; /* ID match? */
5080 for (k=0; lp->phy[k].id && (k < DE4X5_MAX_PHY); k++);
5081 if (k < DE4X5_MAX_PHY) {
5082 memcpy((char *)&lp->phy[k],
5083 (char *)&phy_info[j], sizeof(struct phy_table));
5084 lp->phy[k].addr = i;
5085 lp->mii_cnt++;
5086 lp->active++;
5087 } else {
5088 goto purgatory; /* Stop the search */
5089 }
5090 break;
5091 }
5092 if ((j == limit) && (i < DE4X5_MAX_MII)) {
5093 for (k=0; lp->phy[k].id && (k < DE4X5_MAX_PHY); k++);
5094 lp->phy[k].addr = i;
5095 lp->phy[k].id = id;
5096 lp->phy[k].spd.reg = GENERIC_REG; /* ANLPA register */
5097 lp->phy[k].spd.mask = GENERIC_MASK; /* 100Mb/s technologies */
5098 lp->phy[k].spd.value = GENERIC_VALUE; /* TX & T4, H/F Duplex */
5099 lp->mii_cnt++;
5100 lp->active++;
5101 printk("%s: Using generic MII device control. If the board doesn't operate, \nplease mail the following dump to the author:\n", dev->name);
5102 j = de4x5_debug;
5103 de4x5_debug |= DEBUG_MII;
5104 de4x5_dbg_mii(dev, k);
5105 de4x5_debug = j;
5106 printk("\n");
5107 }
5108 }
5109 purgatory:
5110 lp->active = 0;
5111 if (lp->phy[0].id) { /* Reset the PHY devices */
5112 for (k=0; lp->phy[k].id && (k < DE4X5_MAX_PHY); k++) { /*For each PHY*/
5113 mii_wr(MII_CR_RST, MII_CR, lp->phy[k].addr, DE4X5_MII);
5114 while (mii_rd(MII_CR, lp->phy[k].addr, DE4X5_MII) & MII_CR_RST);
5115
5116 de4x5_dbg_mii(dev, k);
5117 }
5118 }
5119 if (!lp->mii_cnt) lp->useMII = false;
5120
5121 return lp->mii_cnt;
5122 }
5123
5124 static char *
5125 build_setup_frame(struct net_device *dev, int mode)
5126 {
5127 struct de4x5_private *lp = netdev_priv(dev);
5128 int i;
5129 char *pa = lp->setup_frame;
5130
5131 /* Initialise the setup frame */
5132 if (mode == ALL) {
5133 memset(lp->setup_frame, 0, SETUP_FRAME_LEN);
5134 }
5135
5136 if (lp->setup_f == HASH_PERF) {
5137 for (pa=lp->setup_frame+IMPERF_PA_OFFSET, i=0; i<ETH_ALEN; i++) {
5138 *(pa + i) = dev->dev_addr[i]; /* Host address */
5139 if (i & 0x01) pa += 2;
5140 }
5141 *(lp->setup_frame + (HASH_TABLE_LEN >> 3) - 3) = 0x80;
5142 } else {
5143 for (i=0; i<ETH_ALEN; i++) { /* Host address */
5144 *(pa + (i&1)) = dev->dev_addr[i];
5145 if (i & 0x01) pa += 4;
5146 }
5147 for (i=0; i<ETH_ALEN; i++) { /* Broadcast address */
5148 *(pa + (i&1)) = (char) 0xff;
5149 if (i & 0x01) pa += 4;
5150 }
5151 }
5152
5153 return pa; /* Points to the next entry */
5154 }
5155
5156 static void
5157 disable_ast(struct net_device *dev)
5158 {
5159 struct de4x5_private *lp = netdev_priv(dev);
5160 del_timer_sync(&lp->timer);
5161 }
5162
5163 static long
5164 de4x5_switch_mac_port(struct net_device *dev)
5165 {
5166 struct de4x5_private *lp = netdev_priv(dev);
5167 u_long iobase = dev->base_addr;
5168 s32 omr;
5169
5170 STOP_DE4X5;
5171
5172 /* Assert the OMR_PS bit in CSR6 */
5173 omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR |
5174 OMR_FDX));
5175 omr |= lp->infoblock_csr6;
5176 if (omr & OMR_PS) omr |= OMR_HBD;
5177 outl(omr, DE4X5_OMR);
5178
5179 /* Soft Reset */
5180 RESET_DE4X5;
5181
5182 /* Restore the GEP - especially for COMPACT and Type 0 Infoblocks */
5183 if (lp->chipset == DC21140) {
5184 gep_wr(lp->cache.gepc, dev);
5185 gep_wr(lp->cache.gep, dev);
5186 } else if ((lp->chipset & ~0x0ff) == DC2114x) {
5187 reset_init_sia(dev, lp->cache.csr13, lp->cache.csr14, lp->cache.csr15);
5188 }
5189
5190 /* Restore CSR6 */
5191 outl(omr, DE4X5_OMR);
5192
5193 /* Reset CSR8 */
5194 inl(DE4X5_MFC);
5195
5196 return omr;
5197 }
5198
5199 static void
5200 gep_wr(s32 data, struct net_device *dev)
5201 {
5202 struct de4x5_private *lp = netdev_priv(dev);
5203 u_long iobase = dev->base_addr;
5204
5205 if (lp->chipset == DC21140) {
5206 outl(data, DE4X5_GEP);
5207 } else if ((lp->chipset & ~0x00ff) == DC2114x) {
5208 outl((data<<16) | lp->cache.csr15, DE4X5_SIGR);
5209 }
5210
5211 return;
5212 }
5213
5214 static int
5215 gep_rd(struct net_device *dev)
5216 {
5217 struct de4x5_private *lp = netdev_priv(dev);
5218 u_long iobase = dev->base_addr;
5219
5220 if (lp->chipset == DC21140) {
5221 return inl(DE4X5_GEP);
5222 } else if ((lp->chipset & ~0x00ff) == DC2114x) {
5223 return (inl(DE4X5_SIGR) & 0x000fffff);
5224 }
5225
5226 return 0;
5227 }
5228
5229 static void
5230 yawn(struct net_device *dev, int state)
5231 {
5232 struct de4x5_private *lp = netdev_priv(dev);
5233 u_long iobase = dev->base_addr;
5234
5235 if ((lp->chipset == DC21040) || (lp->chipset == DC21140)) return;
5236
5237 if(lp->bus == EISA) {
5238 switch(state) {
5239 case WAKEUP:
5240 outb(WAKEUP, PCI_CFPM);
5241 mdelay(10);
5242 break;
5243
5244 case SNOOZE:
5245 outb(SNOOZE, PCI_CFPM);
5246 break;
5247
5248 case SLEEP:
5249 outl(0, DE4X5_SICR);
5250 outb(SLEEP, PCI_CFPM);
5251 break;
5252 }
5253 } else {
5254 struct pci_dev *pdev = to_pci_dev (lp->gendev);
5255 switch(state) {
5256 case WAKEUP:
5257 pci_write_config_byte(pdev, PCI_CFDA_PSM, WAKEUP);
5258 mdelay(10);
5259 break;
5260
5261 case SNOOZE:
5262 pci_write_config_byte(pdev, PCI_CFDA_PSM, SNOOZE);
5263 break;
5264
5265 case SLEEP:
5266 outl(0, DE4X5_SICR);
5267 pci_write_config_byte(pdev, PCI_CFDA_PSM, SLEEP);
5268 break;
5269 }
5270 }
5271
5272 return;
5273 }
5274
5275 static void
5276 de4x5_parse_params(struct net_device *dev)
5277 {
5278 struct de4x5_private *lp = netdev_priv(dev);
5279 char *p, *q, t;
5280
5281 lp->params.fdx = 0;
5282 lp->params.autosense = AUTO;
5283
5284 if (args == NULL) return;
5285
5286 if ((p = strstr(args, dev->name))) {
5287 if (!(q = strstr(p+strlen(dev->name), "eth"))) q = p + strlen(p);
5288 t = *q;
5289 *q = '\0';
5290
5291 if (strstr(p, "fdx") || strstr(p, "FDX")) lp->params.fdx = 1;
5292
5293 if (strstr(p, "autosense") || strstr(p, "AUTOSENSE")) {
5294 if (strstr(p, "TP")) {
5295 lp->params.autosense = TP;
5296 } else if (strstr(p, "TP_NW")) {
5297 lp->params.autosense = TP_NW;
5298 } else if (strstr(p, "BNC")) {
5299 lp->params.autosense = BNC;
5300 } else if (strstr(p, "AUI")) {
5301 lp->params.autosense = AUI;
5302 } else if (strstr(p, "BNC_AUI")) {
5303 lp->params.autosense = BNC;
5304 } else if (strstr(p, "10Mb")) {
5305 lp->params.autosense = _10Mb;
5306 } else if (strstr(p, "100Mb")) {
5307 lp->params.autosense = _100Mb;
5308 } else if (strstr(p, "AUTO")) {
5309 lp->params.autosense = AUTO;
5310 }
5311 }
5312 *q = t;
5313 }
5314
5315 return;
5316 }
5317
5318 static void
5319 de4x5_dbg_open(struct net_device *dev)
5320 {
5321 struct de4x5_private *lp = netdev_priv(dev);
5322 int i;
5323
5324 if (de4x5_debug & DEBUG_OPEN) {
5325 printk("%s: de4x5 opening with irq %d\n",dev->name,dev->irq);
5326 printk("\tphysical address: ");
5327 for (i=0;i<6;i++) {
5328 printk("%2.2x:",(short)dev->dev_addr[i]);
5329 }
5330 printk("\n");
5331 printk("Descriptor head addresses:\n");
5332 printk("\t0x%8.8lx 0x%8.8lx\n",(u_long)lp->rx_ring,(u_long)lp->tx_ring);
5333 printk("Descriptor addresses:\nRX: ");
5334 for (i=0;i<lp->rxRingSize-1;i++){
5335 if (i < 3) {
5336 printk("0x%8.8lx ",(u_long)&lp->rx_ring[i].status);
5337 }
5338 }
5339 printk("...0x%8.8lx\n",(u_long)&lp->rx_ring[i].status);
5340 printk("TX: ");
5341 for (i=0;i<lp->txRingSize-1;i++){
5342 if (i < 3) {
5343 printk("0x%8.8lx ", (u_long)&lp->tx_ring[i].status);
5344 }
5345 }
5346 printk("...0x%8.8lx\n", (u_long)&lp->tx_ring[i].status);
5347 printk("Descriptor buffers:\nRX: ");
5348 for (i=0;i<lp->rxRingSize-1;i++){
5349 if (i < 3) {
5350 printk("0x%8.8x ",le32_to_cpu(lp->rx_ring[i].buf));
5351 }
5352 }
5353 printk("...0x%8.8x\n",le32_to_cpu(lp->rx_ring[i].buf));
5354 printk("TX: ");
5355 for (i=0;i<lp->txRingSize-1;i++){
5356 if (i < 3) {
5357 printk("0x%8.8x ", le32_to_cpu(lp->tx_ring[i].buf));
5358 }
5359 }
5360 printk("...0x%8.8x\n", le32_to_cpu(lp->tx_ring[i].buf));
5361 printk("Ring size: \nRX: %d\nTX: %d\n",
5362 (short)lp->rxRingSize,
5363 (short)lp->txRingSize);
5364 }
5365
5366 return;
5367 }
5368
5369 static void
5370 de4x5_dbg_mii(struct net_device *dev, int k)
5371 {
5372 struct de4x5_private *lp = netdev_priv(dev);
5373 u_long iobase = dev->base_addr;
5374
5375 if (de4x5_debug & DEBUG_MII) {
5376 printk("\nMII device address: %d\n", lp->phy[k].addr);
5377 printk("MII CR: %x\n",mii_rd(MII_CR,lp->phy[k].addr,DE4X5_MII));
5378 printk("MII SR: %x\n",mii_rd(MII_SR,lp->phy[k].addr,DE4X5_MII));
5379 printk("MII ID0: %x\n",mii_rd(MII_ID0,lp->phy[k].addr,DE4X5_MII));
5380 printk("MII ID1: %x\n",mii_rd(MII_ID1,lp->phy[k].addr,DE4X5_MII));
5381 if (lp->phy[k].id != BROADCOM_T4) {
5382 printk("MII ANA: %x\n",mii_rd(0x04,lp->phy[k].addr,DE4X5_MII));
5383 printk("MII ANC: %x\n",mii_rd(0x05,lp->phy[k].addr,DE4X5_MII));
5384 }
5385 printk("MII 16: %x\n",mii_rd(0x10,lp->phy[k].addr,DE4X5_MII));
5386 if (lp->phy[k].id != BROADCOM_T4) {
5387 printk("MII 17: %x\n",mii_rd(0x11,lp->phy[k].addr,DE4X5_MII));
5388 printk("MII 18: %x\n",mii_rd(0x12,lp->phy[k].addr,DE4X5_MII));
5389 } else {
5390 printk("MII 20: %x\n",mii_rd(0x14,lp->phy[k].addr,DE4X5_MII));
5391 }
5392 }
5393
5394 return;
5395 }
5396
5397 static void
5398 de4x5_dbg_media(struct net_device *dev)
5399 {
5400 struct de4x5_private *lp = netdev_priv(dev);
5401
5402 if (lp->media != lp->c_media) {
5403 if (de4x5_debug & DEBUG_MEDIA) {
5404 printk("%s: media is %s%s\n", dev->name,
5405 (lp->media == NC ? "unconnected, link down or incompatible connection" :
5406 (lp->media == TP ? "TP" :
5407 (lp->media == ANS ? "TP/Nway" :
5408 (lp->media == BNC ? "BNC" :
5409 (lp->media == AUI ? "AUI" :
5410 (lp->media == BNC_AUI ? "BNC/AUI" :
5411 (lp->media == EXT_SIA ? "EXT SIA" :
5412 (lp->media == _100Mb ? "100Mb/s" :
5413 (lp->media == _10Mb ? "10Mb/s" :
5414 "???"
5415 ))))))))), (lp->fdx?" full duplex.":"."));
5416 }
5417 lp->c_media = lp->media;
5418 }
5419
5420 return;
5421 }
5422
5423 static void
5424 de4x5_dbg_srom(struct de4x5_srom *p)
5425 {
5426 int i;
5427 DECLARE_MAC_BUF(mac);
5428
5429 if (de4x5_debug & DEBUG_SROM) {
5430 printk("Sub-system Vendor ID: %04x\n", *((u_short *)p->sub_vendor_id));
5431 printk("Sub-system ID: %04x\n", *((u_short *)p->sub_system_id));
5432 printk("ID Block CRC: %02x\n", (u_char)(p->id_block_crc));
5433 printk("SROM version: %02x\n", (u_char)(p->version));
5434 printk("# controllers: %02x\n", (u_char)(p->num_controllers));
5435
5436 printk("Hardware Address: %s\n", print_mac(mac, p->ieee_addr));
5437 printk("CRC checksum: %04x\n", (u_short)(p->chksum));
5438 for (i=0; i<64; i++) {
5439 printk("%3d %04x\n", i<<1, (u_short)*((u_short *)p+i));
5440 }
5441 }
5442
5443 return;
5444 }
5445
5446 static void
5447 de4x5_dbg_rx(struct sk_buff *skb, int len)
5448 {
5449 int i, j;
5450 DECLARE_MAC_BUF(mac);
5451 DECLARE_MAC_BUF(mac2);
5452
5453 if (de4x5_debug & DEBUG_RX) {
5454 printk("R: %s <- %s len/SAP:%02x%02x [%d]\n",
5455 print_mac(mac, skb->data), print_mac(mac2, &skb->data[6]),
5456 (u_char)skb->data[12],
5457 (u_char)skb->data[13],
5458 len);
5459 for (j=0; len>0;j+=16, len-=16) {
5460 printk(" %03x: ",j);
5461 for (i=0; i<16 && i<len; i++) {
5462 printk("%02x ",(u_char)skb->data[i+j]);
5463 }
5464 printk("\n");
5465 }
5466 }
5467
5468 return;
5469 }
5470
5471 /*
5472 ** Perform IOCTL call functions here. Some are privileged operations and the
5473 ** effective uid is checked in those cases. In the normal course of events
5474 ** this function is only used for my testing.
5475 */
5476 static int
5477 de4x5_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
5478 {
5479 struct de4x5_private *lp = netdev_priv(dev);
5480 struct de4x5_ioctl *ioc = (struct de4x5_ioctl *) &rq->ifr_ifru;
5481 u_long iobase = dev->base_addr;
5482 int i, j, status = 0;
5483 s32 omr;
5484 union {
5485 u8 addr[144];
5486 u16 sval[72];
5487 u32 lval[36];
5488 } tmp;
5489 u_long flags = 0;
5490
5491 switch(ioc->cmd) {
5492 case DE4X5_GET_HWADDR: /* Get the hardware address */
5493 ioc->len = ETH_ALEN;
5494 for (i=0; i<ETH_ALEN; i++) {
5495 tmp.addr[i] = dev->dev_addr[i];
5496 }
5497 if (copy_to_user(ioc->data, tmp.addr, ioc->len)) return -EFAULT;
5498 break;
5499
5500 case DE4X5_SET_HWADDR: /* Set the hardware address */
5501 if (!capable(CAP_NET_ADMIN)) return -EPERM;
5502 if (copy_from_user(tmp.addr, ioc->data, ETH_ALEN)) return -EFAULT;
5503 if (netif_queue_stopped(dev))
5504 return -EBUSY;
5505 netif_stop_queue(dev);
5506 for (i=0; i<ETH_ALEN; i++) {
5507 dev->dev_addr[i] = tmp.addr[i];
5508 }
5509 build_setup_frame(dev, PHYS_ADDR_ONLY);
5510 /* Set up the descriptor and give ownership to the card */
5511 load_packet(dev, lp->setup_frame, TD_IC | PERFECT_F | TD_SET |
5512 SETUP_FRAME_LEN, (struct sk_buff *)1);
5513 lp->tx_new = (++lp->tx_new) % lp->txRingSize;
5514 outl(POLL_DEMAND, DE4X5_TPD); /* Start the TX */
5515 netif_wake_queue(dev); /* Unlock the TX ring */
5516 break;
5517
5518 case DE4X5_SET_PROM: /* Set Promiscuous Mode */
5519 if (!capable(CAP_NET_ADMIN)) return -EPERM;
5520 omr = inl(DE4X5_OMR);
5521 omr |= OMR_PR;
5522 outl(omr, DE4X5_OMR);
5523 dev->flags |= IFF_PROMISC;
5524 break;
5525
5526 case DE4X5_CLR_PROM: /* Clear Promiscuous Mode */
5527 if (!capable(CAP_NET_ADMIN)) return -EPERM;
5528 omr = inl(DE4X5_OMR);
5529 omr &= ~OMR_PR;
5530 outl(omr, DE4X5_OMR);
5531 dev->flags &= ~IFF_PROMISC;
5532 break;
5533
5534 case DE4X5_SAY_BOO: /* Say "Boo!" to the kernel log file */
5535 if (!capable(CAP_NET_ADMIN)) return -EPERM;
5536 printk("%s: Boo!\n", dev->name);
5537 break;
5538
5539 case DE4X5_MCA_EN: /* Enable pass all multicast addressing */
5540 if (!capable(CAP_NET_ADMIN)) return -EPERM;
5541 omr = inl(DE4X5_OMR);
5542 omr |= OMR_PM;
5543 outl(omr, DE4X5_OMR);
5544 break;
5545
5546 case DE4X5_GET_STATS: /* Get the driver statistics */
5547 {
5548 struct pkt_stats statbuf;
5549 ioc->len = sizeof(statbuf);
5550 spin_lock_irqsave(&lp->lock, flags);
5551 memcpy(&statbuf, &lp->pktStats, ioc->len);
5552 spin_unlock_irqrestore(&lp->lock, flags);
5553 if (copy_to_user(ioc->data, &statbuf, ioc->len))
5554 return -EFAULT;
5555 break;
5556 }
5557 case DE4X5_CLR_STATS: /* Zero out the driver statistics */
5558 if (!capable(CAP_NET_ADMIN)) return -EPERM;
5559 spin_lock_irqsave(&lp->lock, flags);
5560 memset(&lp->pktStats, 0, sizeof(lp->pktStats));
5561 spin_unlock_irqrestore(&lp->lock, flags);
5562 break;
5563
5564 case DE4X5_GET_OMR: /* Get the OMR Register contents */
5565 tmp.addr[0] = inl(DE4X5_OMR);
5566 if (copy_to_user(ioc->data, tmp.addr, 1)) return -EFAULT;
5567 break;
5568
5569 case DE4X5_SET_OMR: /* Set the OMR Register contents */
5570 if (!capable(CAP_NET_ADMIN)) return -EPERM;
5571 if (copy_from_user(tmp.addr, ioc->data, 1)) return -EFAULT;
5572 outl(tmp.addr[0], DE4X5_OMR);
5573 break;
5574
5575 case DE4X5_GET_REG: /* Get the DE4X5 Registers */
5576 j = 0;
5577 tmp.lval[0] = inl(DE4X5_STS); j+=4;
5578 tmp.lval[1] = inl(DE4X5_BMR); j+=4;
5579 tmp.lval[2] = inl(DE4X5_IMR); j+=4;
5580 tmp.lval[3] = inl(DE4X5_OMR); j+=4;
5581 tmp.lval[4] = inl(DE4X5_SISR); j+=4;
5582 tmp.lval[5] = inl(DE4X5_SICR); j+=4;
5583 tmp.lval[6] = inl(DE4X5_STRR); j+=4;
5584 tmp.lval[7] = inl(DE4X5_SIGR); j+=4;
5585 ioc->len = j;
5586 if (copy_to_user(ioc->data, tmp.addr, ioc->len)) return -EFAULT;
5587 break;
5588
5589 #define DE4X5_DUMP 0x0f /* Dump the DE4X5 Status */
5590 /*
5591 case DE4X5_DUMP:
5592 j = 0;
5593 tmp.addr[j++] = dev->irq;
5594 for (i=0; i<ETH_ALEN; i++) {
5595 tmp.addr[j++] = dev->dev_addr[i];
5596 }
5597 tmp.addr[j++] = lp->rxRingSize;
5598 tmp.lval[j>>2] = (long)lp->rx_ring; j+=4;
5599 tmp.lval[j>>2] = (long)lp->tx_ring; j+=4;
5600
5601 for (i=0;i<lp->rxRingSize-1;i++){
5602 if (i < 3) {
5603 tmp.lval[j>>2] = (long)&lp->rx_ring[i].status; j+=4;
5604 }
5605 }
5606 tmp.lval[j>>2] = (long)&lp->rx_ring[i].status; j+=4;
5607 for (i=0;i<lp->txRingSize-1;i++){
5608 if (i < 3) {
5609 tmp.lval[j>>2] = (long)&lp->tx_ring[i].status; j+=4;
5610 }
5611 }
5612 tmp.lval[j>>2] = (long)&lp->tx_ring[i].status; j+=4;
5613
5614 for (i=0;i<lp->rxRingSize-1;i++){
5615 if (i < 3) {
5616 tmp.lval[j>>2] = (s32)le32_to_cpu(lp->rx_ring[i].buf); j+=4;
5617 }
5618 }
5619 tmp.lval[j>>2] = (s32)le32_to_cpu(lp->rx_ring[i].buf); j+=4;
5620 for (i=0;i<lp->txRingSize-1;i++){
5621 if (i < 3) {
5622 tmp.lval[j>>2] = (s32)le32_to_cpu(lp->tx_ring[i].buf); j+=4;
5623 }
5624 }
5625 tmp.lval[j>>2] = (s32)le32_to_cpu(lp->tx_ring[i].buf); j+=4;
5626
5627 for (i=0;i<lp->rxRingSize;i++){
5628 tmp.lval[j>>2] = le32_to_cpu(lp->rx_ring[i].status); j+=4;
5629 }
5630 for (i=0;i<lp->txRingSize;i++){
5631 tmp.lval[j>>2] = le32_to_cpu(lp->tx_ring[i].status); j+=4;
5632 }
5633
5634 tmp.lval[j>>2] = inl(DE4X5_BMR); j+=4;
5635 tmp.lval[j>>2] = inl(DE4X5_TPD); j+=4;
5636 tmp.lval[j>>2] = inl(DE4X5_RPD); j+=4;
5637 tmp.lval[j>>2] = inl(DE4X5_RRBA); j+=4;
5638 tmp.lval[j>>2] = inl(DE4X5_TRBA); j+=4;
5639 tmp.lval[j>>2] = inl(DE4X5_STS); j+=4;
5640 tmp.lval[j>>2] = inl(DE4X5_OMR); j+=4;
5641 tmp.lval[j>>2] = inl(DE4X5_IMR); j+=4;
5642 tmp.lval[j>>2] = lp->chipset; j+=4;
5643 if (lp->chipset == DC21140) {
5644 tmp.lval[j>>2] = gep_rd(dev); j+=4;
5645 } else {
5646 tmp.lval[j>>2] = inl(DE4X5_SISR); j+=4;
5647 tmp.lval[j>>2] = inl(DE4X5_SICR); j+=4;
5648 tmp.lval[j>>2] = inl(DE4X5_STRR); j+=4;
5649 tmp.lval[j>>2] = inl(DE4X5_SIGR); j+=4;
5650 }
5651 tmp.lval[j>>2] = lp->phy[lp->active].id; j+=4;
5652 if (lp->phy[lp->active].id && (!lp->useSROM || lp->useMII)) {
5653 tmp.lval[j>>2] = lp->active; j+=4;
5654 tmp.lval[j>>2]=mii_rd(MII_CR,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
5655 tmp.lval[j>>2]=mii_rd(MII_SR,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
5656 tmp.lval[j>>2]=mii_rd(MII_ID0,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
5657 tmp.lval[j>>2]=mii_rd(MII_ID1,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
5658 if (lp->phy[lp->active].id != BROADCOM_T4) {
5659 tmp.lval[j>>2]=mii_rd(MII_ANA,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
5660 tmp.lval[j>>2]=mii_rd(MII_ANLPA,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
5661 }
5662 tmp.lval[j>>2]=mii_rd(0x10,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
5663 if (lp->phy[lp->active].id != BROADCOM_T4) {
5664 tmp.lval[j>>2]=mii_rd(0x11,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
5665 tmp.lval[j>>2]=mii_rd(0x12,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
5666 } else {
5667 tmp.lval[j>>2]=mii_rd(0x14,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
5668 }
5669 }
5670
5671 tmp.addr[j++] = lp->txRingSize;
5672 tmp.addr[j++] = netif_queue_stopped(dev);
5673
5674 ioc->len = j;
5675 if (copy_to_user(ioc->data, tmp.addr, ioc->len)) return -EFAULT;
5676 break;
5677
5678 */
5679 default:
5680 return -EOPNOTSUPP;
5681 }
5682
5683 return status;
5684 }
5685
5686 static int __init de4x5_module_init (void)
5687 {
5688 int err = 0;
5689
5690 #ifdef CONFIG_PCI
5691 err = pci_register_driver(&de4x5_pci_driver);
5692 #endif
5693 #ifdef CONFIG_EISA
5694 err |= eisa_driver_register (&de4x5_eisa_driver);
5695 #endif
5696
5697 return err;
5698 }
5699
5700 static void __exit de4x5_module_exit (void)
5701 {
5702 #ifdef CONFIG_PCI
5703 pci_unregister_driver (&de4x5_pci_driver);
5704 #endif
5705 #ifdef CONFIG_EISA
5706 eisa_driver_unregister (&de4x5_eisa_driver);
5707 #endif
5708 }
5709
5710 module_init (de4x5_module_init);
5711 module_exit (de4x5_module_exit);
cpufreq for S3C2410