[IA64-SGI] - New SN hardware support - bte_fixes
[linux-2.6/pdupreez.git] / arch / arm / mach-omap1 / board-voiceblue.c
blobe422819889904124bf56e84fd577a90ba5c9bca9
1 /*
2 * linux/arch/arm/mach-omap1/board-voiceblue.c
4 * Modified from board-generic.c
6 * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
8 * Code for OMAP5910 based VoiceBlue board (VoIP to GSM gateway).
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
15 #include <linux/delay.h>
16 #include <linux/device.h>
17 #include <linux/interrupt.h>
18 #include <linux/init.h>
19 #include <linux/kernel.h>
20 #include <linux/notifier.h>
21 #include <linux/reboot.h>
22 #include <linux/serial_8250.h>
23 #include <linux/serial_reg.h>
25 #include <asm/hardware.h>
26 #include <asm/mach-types.h>
27 #include <asm/mach/arch.h>
28 #include <asm/mach/map.h>
30 #include <asm/arch/gpio.h>
31 #include <asm/arch/tc.h>
32 #include <asm/arch/mux.h>
33 #include <asm/arch/usb.h>
34 #include <asm/arch/common.h>
36 extern void omap_init_time(void);
37 extern int omap_gpio_init(void);
39 static struct plat_serial8250_port voiceblue_ports[] = {
41 .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x40000),
42 .irq = OMAP_GPIO_IRQ(12),
43 .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
44 .iotype = UPIO_MEM,
45 .regshift = 1,
46 .uartclk = 3686400,
49 .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x50000),
50 .irq = OMAP_GPIO_IRQ(13),
51 .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
52 .iotype = UPIO_MEM,
53 .regshift = 1,
54 .uartclk = 3686400,
57 .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x60000),
58 .irq = OMAP_GPIO_IRQ(14),
59 .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
60 .iotype = UPIO_MEM,
61 .regshift = 1,
62 .uartclk = 3686400,
65 .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x70000),
66 .irq = OMAP_GPIO_IRQ(15),
67 .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
68 .iotype = UPIO_MEM,
69 .regshift = 1,
70 .uartclk = 3686400,
72 { },
75 static struct platform_device serial_device = {
76 .name = "serial8250",
77 .id = 1,
78 .dev = {
79 .platform_data = voiceblue_ports,
83 static int __init ext_uart_init(void)
85 return platform_device_register(&serial_device);
87 arch_initcall(ext_uart_init);
89 static struct resource voiceblue_smc91x_resources[] = {
90 [0] = {
91 .start = OMAP_CS2_PHYS + 0x300,
92 .end = OMAP_CS2_PHYS + 0x300 + 16,
93 .flags = IORESOURCE_MEM,
95 [1] = {
96 .start = OMAP_GPIO_IRQ(8),
97 .end = OMAP_GPIO_IRQ(8),
98 .flags = IORESOURCE_IRQ,
102 static struct platform_device voiceblue_smc91x_device = {
103 .name = "smc91x",
104 .id = 0,
105 .num_resources = ARRAY_SIZE(voiceblue_smc91x_resources),
106 .resource = voiceblue_smc91x_resources,
109 static struct platform_device *voiceblue_devices[] __initdata = {
110 &voiceblue_smc91x_device,
113 static struct omap_usb_config voiceblue_usb_config __initdata = {
114 .hmc_mode = 3,
115 .register_host = 1,
116 .register_dev = 1,
117 .pins[0] = 2,
118 .pins[1] = 6,
119 .pins[2] = 6,
122 static struct omap_board_config_kernel voiceblue_config[] = {
123 { OMAP_TAG_USB, &voiceblue_usb_config },
126 static void __init voiceblue_init_irq(void)
128 omap_init_irq();
129 omap_gpio_init();
132 static void __init voiceblue_init(void)
134 /* There is a good chance board is going up, so enable Power LED
135 * (it is connected through invertor) */
136 omap_writeb(0x00, OMAP_LPG1_LCR);
137 /* Watchdog */
138 omap_request_gpio(0);
139 /* smc91x reset */
140 omap_request_gpio(7);
141 omap_set_gpio_direction(7, 0);
142 omap_set_gpio_dataout(7, 1);
143 udelay(2); /* wait at least 100ns */
144 omap_set_gpio_dataout(7, 0);
145 mdelay(50); /* 50ms until PHY ready */
146 /* smc91x interrupt pin */
147 omap_request_gpio(8);
148 omap_set_gpio_edge_ctrl(8, OMAP_GPIO_RISING_EDGE);
149 /* 16C554 reset*/
150 omap_request_gpio(6);
151 omap_set_gpio_direction(6, 0);
152 omap_set_gpio_dataout(6, 0);
153 /* 16C554 interrupt pins */
154 omap_request_gpio(12);
155 omap_request_gpio(13);
156 omap_request_gpio(14);
157 omap_request_gpio(15);
158 omap_set_gpio_edge_ctrl(12, OMAP_GPIO_RISING_EDGE);
159 omap_set_gpio_edge_ctrl(13, OMAP_GPIO_RISING_EDGE);
160 omap_set_gpio_edge_ctrl(14, OMAP_GPIO_RISING_EDGE);
161 omap_set_gpio_edge_ctrl(15, OMAP_GPIO_RISING_EDGE);
163 platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
164 omap_board_config = voiceblue_config;
165 omap_board_config_size = ARRAY_SIZE(voiceblue_config);
168 static int __initdata omap_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
170 static void __init voiceblue_map_io(void)
172 omap_map_common_io();
173 omap_serial_init(omap_serial_ports);
176 #define MACHINE_PANICED 1
177 #define MACHINE_REBOOTING 2
178 #define MACHINE_REBOOT 4
179 static unsigned long machine_state;
181 static int panic_event(struct notifier_block *this, unsigned long event,
182 void *ptr)
184 if (test_and_set_bit(MACHINE_PANICED, &machine_state))
185 return NOTIFY_DONE;
187 /* Flash Power LED
188 * (TODO: Enable clock right way (enabled in bootloader already)) */
189 omap_writeb(0x78, OMAP_LPG1_LCR);
191 return NOTIFY_DONE;
194 static struct notifier_block panic_block = {
195 .notifier_call = panic_event,
198 static int __init setup_notifier(void)
200 /* Setup panic notifier */
201 notifier_chain_register(&panic_notifier_list, &panic_block);
203 return 0;
206 postcore_initcall(setup_notifier);
208 static int wdt_gpio_state;
210 void voiceblue_wdt_enable(void)
212 omap_set_gpio_direction(0, 0);
213 omap_set_gpio_dataout(0, 0);
214 omap_set_gpio_dataout(0, 1);
215 omap_set_gpio_dataout(0, 0);
216 wdt_gpio_state = 0;
219 void voiceblue_wdt_disable(void)
221 omap_set_gpio_dataout(0, 0);
222 omap_set_gpio_dataout(0, 1);
223 omap_set_gpio_dataout(0, 0);
224 omap_set_gpio_direction(0, 1);
227 void voiceblue_wdt_ping(void)
229 if (test_bit(MACHINE_REBOOT, &machine_state))
230 return;
232 wdt_gpio_state = !wdt_gpio_state;
233 omap_set_gpio_dataout(0, wdt_gpio_state);
236 void voiceblue_reset(void)
238 set_bit(MACHINE_REBOOT, &machine_state);
239 voiceblue_wdt_enable();
240 while (1) ;
243 EXPORT_SYMBOL(voiceblue_wdt_enable);
244 EXPORT_SYMBOL(voiceblue_wdt_disable);
245 EXPORT_SYMBOL(voiceblue_wdt_ping);
247 MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
248 /* Maintainer: Ladislav Michl <michl@2n.cz> */
249 .phys_ram = 0x10000000,
250 .phys_io = 0xfff00000,
251 .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
252 .boot_params = 0x10000100,
253 .map_io = voiceblue_map_io,
254 .init_irq = voiceblue_init_irq,
255 .init_machine = voiceblue_init,
256 .timer = &omap_timer,
257 MACHINE_END