skge: receive flush logic
[linux-2.6/openmoko-kernel/knife-kernel.git] / drivers / mmc / core / mmc_ops.c
blob64b05c6270f2f3aef54d88e309f8772694c4347a
1 /*
2 * linux/drivers/mmc/core/mmc_ops.h
4 * Copyright 2006-2007 Pierre Ossman
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or (at
9 * your option) any later version.
12 #include <linux/types.h>
13 #include <linux/scatterlist.h>
15 #include <linux/mmc/host.h>
16 #include <linux/mmc/card.h>
17 #include <linux/mmc/mmc.h>
19 #include "core.h"
20 #include "mmc_ops.h"
22 static int _mmc_select_card(struct mmc_host *host, struct mmc_card *card)
24 int err;
25 struct mmc_command cmd;
27 BUG_ON(!host);
29 memset(&cmd, 0, sizeof(struct mmc_command));
31 cmd.opcode = MMC_SELECT_CARD;
33 if (card) {
34 cmd.arg = card->rca << 16;
35 cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
36 } else {
37 cmd.arg = 0;
38 cmd.flags = MMC_RSP_NONE | MMC_CMD_AC;
41 err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
42 if (err)
43 return err;
45 return 0;
48 int mmc_select_card(struct mmc_card *card)
50 BUG_ON(!card);
52 return _mmc_select_card(card->host, card);
55 int mmc_deselect_cards(struct mmc_host *host)
57 return _mmc_select_card(host, NULL);
60 int mmc_go_idle(struct mmc_host *host)
62 int err;
63 struct mmc_command cmd;
66 * Non-SPI hosts need to prevent chipselect going active during
67 * GO_IDLE; that would put chips into SPI mode. Remind them of
68 * that in case of hardware that won't pull up DAT3/nCS otherwise.
70 * SPI hosts ignore ios.chip_select; it's managed according to
71 * rules that must accomodate non-MMC slaves which this layer
72 * won't even know about.
74 if (!mmc_host_is_spi(host)) {
75 mmc_set_chip_select(host, MMC_CS_HIGH);
76 mmc_delay(1);
79 memset(&cmd, 0, sizeof(struct mmc_command));
81 cmd.opcode = MMC_GO_IDLE_STATE;
82 cmd.arg = 0;
83 cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_NONE | MMC_CMD_BC;
85 err = mmc_wait_for_cmd(host, &cmd, 0);
87 mmc_delay(1);
89 if (!mmc_host_is_spi(host)) {
90 mmc_set_chip_select(host, MMC_CS_DONTCARE);
91 mmc_delay(1);
94 host->use_spi_crc = 0;
96 return err;
99 int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
101 struct mmc_command cmd;
102 int i, err = 0;
104 BUG_ON(!host);
106 memset(&cmd, 0, sizeof(struct mmc_command));
108 cmd.opcode = MMC_SEND_OP_COND;
109 cmd.arg = mmc_host_is_spi(host) ? 0 : ocr;
110 cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R3 | MMC_CMD_BCR;
112 for (i = 100; i; i--) {
113 err = mmc_wait_for_cmd(host, &cmd, 0);
114 if (err)
115 break;
117 /* if we're just probing, do a single pass */
118 if (ocr == 0)
119 break;
121 /* otherwise wait until reset completes */
122 if (mmc_host_is_spi(host)) {
123 if (!(cmd.resp[0] & R1_SPI_IDLE))
124 break;
125 } else {
126 if (cmd.resp[0] & MMC_CARD_BUSY)
127 break;
130 err = -ETIMEDOUT;
132 mmc_delay(10);
135 if (rocr && !mmc_host_is_spi(host))
136 *rocr = cmd.resp[0];
138 return err;
141 int mmc_all_send_cid(struct mmc_host *host, u32 *cid)
143 int err;
144 struct mmc_command cmd;
146 BUG_ON(!host);
147 BUG_ON(!cid);
149 memset(&cmd, 0, sizeof(struct mmc_command));
151 cmd.opcode = MMC_ALL_SEND_CID;
152 cmd.arg = 0;
153 cmd.flags = MMC_RSP_R2 | MMC_CMD_BCR;
155 err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
156 if (err)
157 return err;
159 memcpy(cid, cmd.resp, sizeof(u32) * 4);
161 return 0;
164 int mmc_set_relative_addr(struct mmc_card *card)
166 int err;
167 struct mmc_command cmd;
169 BUG_ON(!card);
170 BUG_ON(!card->host);
172 memset(&cmd, 0, sizeof(struct mmc_command));
174 cmd.opcode = MMC_SET_RELATIVE_ADDR;
175 cmd.arg = card->rca << 16;
176 cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
178 err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES);
179 if (err)
180 return err;
182 return 0;
185 static int
186 mmc_send_cxd_native(struct mmc_host *host, u32 arg, u32 *cxd, int opcode)
188 int err;
189 struct mmc_command cmd;
191 BUG_ON(!host);
192 BUG_ON(!cxd);
194 memset(&cmd, 0, sizeof(struct mmc_command));
196 cmd.opcode = opcode;
197 cmd.arg = arg;
198 cmd.flags = MMC_RSP_R2 | MMC_CMD_AC;
200 err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
201 if (err)
202 return err;
204 memcpy(cxd, cmd.resp, sizeof(u32) * 4);
206 return 0;
209 static int
210 mmc_send_cxd_data(struct mmc_card *card, struct mmc_host *host,
211 u32 opcode, void *buf, unsigned len)
213 struct mmc_request mrq;
214 struct mmc_command cmd;
215 struct mmc_data data;
216 struct scatterlist sg;
217 void *data_buf;
219 /* dma onto stack is unsafe/nonportable, but callers to this
220 * routine normally provide temporary on-stack buffers ...
222 data_buf = kmalloc(len, GFP_KERNEL);
223 if (data_buf == NULL)
224 return -ENOMEM;
226 memset(&mrq, 0, sizeof(struct mmc_request));
227 memset(&cmd, 0, sizeof(struct mmc_command));
228 memset(&data, 0, sizeof(struct mmc_data));
230 mrq.cmd = &cmd;
231 mrq.data = &data;
233 cmd.opcode = opcode;
234 cmd.arg = 0;
236 /* NOTE HACK: the MMC_RSP_SPI_R1 is always correct here, but we
237 * rely on callers to never use this with "native" calls for reading
238 * CSD or CID. Native versions of those commands use the R2 type,
239 * not R1 plus a data block.
241 cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
243 data.blksz = len;
244 data.blocks = 1;
245 data.flags = MMC_DATA_READ;
246 data.sg = &sg;
247 data.sg_len = 1;
249 sg_init_one(&sg, data_buf, len);
251 if (card)
252 mmc_set_data_timeout(&data, card);
254 mmc_wait_for_req(host, &mrq);
256 memcpy(buf, data_buf, len);
257 kfree(data_buf);
259 if (cmd.error)
260 return cmd.error;
261 if (data.error)
262 return data.error;
264 return 0;
267 int mmc_send_csd(struct mmc_card *card, u32 *csd)
269 int ret, i;
271 if (!mmc_host_is_spi(card->host))
272 return mmc_send_cxd_native(card->host, card->rca << 16,
273 csd, MMC_SEND_CSD);
275 ret = mmc_send_cxd_data(card, card->host, MMC_SEND_CSD, csd, 16);
276 if (ret)
277 return ret;
279 for (i = 0;i < 4;i++)
280 csd[i] = be32_to_cpu(csd[i]);
282 return 0;
285 int mmc_send_cid(struct mmc_host *host, u32 *cid)
287 int ret, i;
289 if (!mmc_host_is_spi(host)) {
290 if (!host->card)
291 return -EINVAL;
292 return mmc_send_cxd_native(host, host->card->rca << 16,
293 cid, MMC_SEND_CID);
296 ret = mmc_send_cxd_data(NULL, host, MMC_SEND_CID, cid, 16);
297 if (ret)
298 return ret;
300 for (i = 0;i < 4;i++)
301 cid[i] = be32_to_cpu(cid[i]);
303 return 0;
306 int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd)
308 return mmc_send_cxd_data(card, card->host, MMC_SEND_EXT_CSD,
309 ext_csd, 512);
312 int mmc_spi_read_ocr(struct mmc_host *host, int highcap, u32 *ocrp)
314 struct mmc_command cmd;
315 int err;
317 memset(&cmd, 0, sizeof(struct mmc_command));
319 cmd.opcode = MMC_SPI_READ_OCR;
320 cmd.arg = highcap ? (1 << 30) : 0;
321 cmd.flags = MMC_RSP_SPI_R3;
323 err = mmc_wait_for_cmd(host, &cmd, 0);
325 *ocrp = cmd.resp[1];
326 return err;
329 int mmc_spi_set_crc(struct mmc_host *host, int use_crc)
331 struct mmc_command cmd;
332 int err;
334 memset(&cmd, 0, sizeof(struct mmc_command));
336 cmd.opcode = MMC_SPI_CRC_ON_OFF;
337 cmd.flags = MMC_RSP_SPI_R1;
338 cmd.arg = use_crc;
340 err = mmc_wait_for_cmd(host, &cmd, 0);
341 if (!err)
342 host->use_spi_crc = use_crc;
343 return err;
346 int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value)
348 int err;
349 struct mmc_command cmd;
351 BUG_ON(!card);
352 BUG_ON(!card->host);
354 memset(&cmd, 0, sizeof(struct mmc_command));
356 cmd.opcode = MMC_SWITCH;
357 cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
358 (index << 16) |
359 (value << 8) |
360 set;
361 cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
363 err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES);
364 if (err)
365 return err;
367 return 0;
370 int mmc_send_status(struct mmc_card *card, u32 *status)
372 int err;
373 struct mmc_command cmd;
375 BUG_ON(!card);
376 BUG_ON(!card->host);
378 memset(&cmd, 0, sizeof(struct mmc_command));
380 cmd.opcode = MMC_SEND_STATUS;
381 if (!mmc_host_is_spi(card->host))
382 cmd.arg = card->rca << 16;
383 cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC;
385 err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES);
386 if (err)
387 return err;
389 /* NOTE: callers are required to understand the difference
390 * between "native" and SPI format status words!
392 if (status)
393 *status = cmd.resp[0];
395 return 0;