?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Revert "sky2: remove check for PCI wakeup setting from BIOS"
[linux-2.6/openmoko-kernel/knife-kernel.git] / drivers / net / sky2.c
blobbc15940ce1bc8ed74ba8127df49f0599d2262c48
1 /*
2 * New driver for Marvell Yukon 2 chipset.
3 * Based on earlier sk98lin, and skge driver.
4 *
5 * This driver intentionally does not support all the features
6 * of the original driver such as link fail-over and link management because
7 * those should be done at higher levels.
8 *
9 * Copyright (C) 2005 Stephen Hemminger <shemminger@osdl.org>
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23 */
24
25 #include <linux/crc32.h>
26 #include <linux/kernel.h>
27 #include <linux/version.h>
28 #include <linux/module.h>
29 #include <linux/netdevice.h>
30 #include <linux/dma-mapping.h>
31 #include <linux/etherdevice.h>
32 #include <linux/ethtool.h>
33 #include <linux/pci.h>
34 #include <linux/ip.h>
35 #include <net/ip.h>
36 #include <linux/tcp.h>
37 #include <linux/in.h>
38 #include <linux/delay.h>
39 #include <linux/workqueue.h>
40 #include <linux/if_vlan.h>
41 #include <linux/prefetch.h>
42 #include <linux/debugfs.h>
43 #include <linux/mii.h>
44
45 #include <asm/irq.h>
46
47 #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
48 #define SKY2_VLAN_TAG_USED 1
49 #endif
50
51 #include "sky2.h"
52
53 #define DRV_NAME "sky2"
54 #define DRV_VERSION "1.20"
55 #define PFX DRV_NAME " "
56
57 /*
58 * The Yukon II chipset takes 64 bit command blocks (called list elements)
59 * that are organized into three (receive, transmit, status) different rings
60 * similar to Tigon3.
61 */
62
63 #define RX_LE_SIZE 1024
64 #define RX_LE_BYTES (RX_LE_SIZE*sizeof(struct sky2_rx_le))
65 #define RX_MAX_PENDING (RX_LE_SIZE/6 - 2)
66 #define RX_DEF_PENDING RX_MAX_PENDING
67 #define RX_SKB_ALIGN 8
68
69 #define TX_RING_SIZE 512
70 #define TX_DEF_PENDING (TX_RING_SIZE - 1)
71 #define TX_MIN_PENDING 64
72 #define MAX_SKB_TX_LE (4 + (sizeof(dma_addr_t)/sizeof(u32))*MAX_SKB_FRAGS)
73
74 #define STATUS_RING_SIZE 2048 /* 2 ports * (TX + 2*RX) */
75 #define STATUS_LE_BYTES (STATUS_RING_SIZE*sizeof(struct sky2_status_le))
76 #define TX_WATCHDOG (5 * HZ)
77 #define NAPI_WEIGHT 64
78 #define PHY_RETRIES 1000
79
80 #define SKY2_EEPROM_MAGIC 0x9955aabb
81
82
83 #define RING_NEXT(x,s) (((x)+1) & ((s)-1))
84
85 static const u32 default_msg =
86 NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK
87 | NETIF_MSG_TIMER | NETIF_MSG_TX_ERR | NETIF_MSG_RX_ERR
88 | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN;
89
90 static int debug = -1; /* defaults above */
91 module_param(debug, int, 0);
92 MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
93
94 static int copybreak __read_mostly = 128;
95 module_param(copybreak, int, 0);
96 MODULE_PARM_DESC(copybreak, "Receive copy threshold");
97
98 static int disable_msi = 0;
99 module_param(disable_msi, int, 0);
100 MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
101
102 static const struct pci_device_id sky2_id_table[] = {
103 { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) }, /* SK-9Sxx */
104 { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, /* SK-9Exx */
105 { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) }, /* DGE-560T */
106 { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4001) }, /* DGE-550SX */
107 { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4B02) }, /* DGE-560SX */
108 { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4B03) }, /* DGE-550T */
109 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4340) }, /* 88E8021 */
110 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4341) }, /* 88E8022 */
111 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4342) }, /* 88E8061 */
112 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4343) }, /* 88E8062 */
113 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4344) }, /* 88E8021 */
114 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4345) }, /* 88E8022 */
115 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4346) }, /* 88E8061 */
116 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4347) }, /* 88E8062 */
117 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4350) }, /* 88E8035 */
118 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4351) }, /* 88E8036 */
119 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4352) }, /* 88E8038 */
120 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4353) }, /* 88E8039 */
121 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4354) }, /* 88E8040 */
122 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4356) }, /* 88EC033 */
123 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4357) }, /* 88E8042 */
124 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x435A) }, /* 88E8048 */
125 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4360) }, /* 88E8052 */
126 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4361) }, /* 88E8050 */
127 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4362) }, /* 88E8053 */
128 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4363) }, /* 88E8055 */
129 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4364) }, /* 88E8056 */
130 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4365) }, /* 88E8070 */
131 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4366) }, /* 88EC036 */
132 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4367) }, /* 88EC032 */
133 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4368) }, /* 88EC034 */
134 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4369) }, /* 88EC042 */
135 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436A) }, /* 88E8058 */
136 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436B) }, /* 88E8071 */
137 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436C) }, /* 88E8072 */
138 { 0 }
139 };
140
141 MODULE_DEVICE_TABLE(pci, sky2_id_table);
142
143 /* Avoid conditionals by using array */
144 static const unsigned txqaddr[] = { Q_XA1, Q_XA2 };
145 static const unsigned rxqaddr[] = { Q_R1, Q_R2 };
146 static const u32 portirq_msk[] = { Y2_IS_PORT_1, Y2_IS_PORT_2 };
147
148 /* This driver supports yukon2 chipset only */
149 static const char *yukon2_name[] = {
150 "XL", /* 0xb3 */
151 "EC Ultra", /* 0xb4 */
152 "Extreme", /* 0xb5 */
153 "EC", /* 0xb6 */
154 "FE", /* 0xb7 */
155 "FE+", /* 0xb8 */
156 };
157
158 static void sky2_set_multicast(struct net_device *dev);
159
160 /* Access to PHY via serial interconnect */
161 static int gm_phy_write(struct sky2_hw *hw, unsigned port, u16 reg, u16 val)
162 {
163 int i;
164
165 gma_write16(hw, port, GM_SMI_DATA, val);
166 gma_write16(hw, port, GM_SMI_CTRL,
167 GM_SMI_CT_PHY_AD(PHY_ADDR_MARV) | GM_SMI_CT_REG_AD(reg));
168
169 for (i = 0; i < PHY_RETRIES; i++) {
170 u16 ctrl = gma_read16(hw, port, GM_SMI_CTRL);
171 if (ctrl == 0xffff)
172 goto io_error;
173
174 if (!(ctrl & GM_SMI_CT_BUSY))
175 return 0;
176
177 udelay(10);
178 }
179
180 dev_warn(&hw->pdev->dev,"%s: phy write timeout\n", hw->dev[port]->name);
181 return -ETIMEDOUT;
182
183 io_error:
184 dev_err(&hw->pdev->dev, "%s: phy I/O error\n", hw->dev[port]->name);
185 return -EIO;
186 }
187
188 static int __gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg, u16 *val)
189 {
190 int i;
191
192 gma_write16(hw, port, GM_SMI_CTRL, GM_SMI_CT_PHY_AD(PHY_ADDR_MARV)
193 | GM_SMI_CT_REG_AD(reg) | GM_SMI_CT_OP_RD);
194
195 for (i = 0; i < PHY_RETRIES; i++) {
196 u16 ctrl = gma_read16(hw, port, GM_SMI_CTRL);
197 if (ctrl == 0xffff)
198 goto io_error;
199
200 if (ctrl & GM_SMI_CT_RD_VAL) {
201 *val = gma_read16(hw, port, GM_SMI_DATA);
202 return 0;
203 }
204
205 udelay(10);
206 }
207
208 dev_warn(&hw->pdev->dev, "%s: phy read timeout\n", hw->dev[port]->name);
209 return -ETIMEDOUT;
210 io_error:
211 dev_err(&hw->pdev->dev, "%s: phy I/O error\n", hw->dev[port]->name);
212 return -EIO;
213 }
214
215 static inline u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg)
216 {
217 u16 v;
218 __gm_phy_read(hw, port, reg, &v);
219 return v;
220 }
221
222
223 static void sky2_power_on(struct sky2_hw *hw)
224 {
225 /* switch power to VCC (WA for VAUX problem) */
226 sky2_write8(hw, B0_POWER_CTRL,
227 PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_OFF | PC_VCC_ON);
228
229 /* disable Core Clock Division, */
230 sky2_write32(hw, B2_Y2_CLK_CTRL, Y2_CLK_DIV_DIS);
231
232 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
233 /* enable bits are inverted */
234 sky2_write8(hw, B2_Y2_CLK_GATE,
235 Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
236 Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
237 Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
238 else
239 sky2_write8(hw, B2_Y2_CLK_GATE, 0);
240
241 if (hw->flags & SKY2_HW_ADV_POWER_CTL) {
242 u32 reg;
243
244 sky2_pci_write32(hw, PCI_DEV_REG3, 0);
245
246 reg = sky2_pci_read32(hw, PCI_DEV_REG4);
247 /* set all bits to 0 except bits 15..12 and 8 */
248 reg &= P_ASPM_CONTROL_MSK;
249 sky2_pci_write32(hw, PCI_DEV_REG4, reg);
250
251 reg = sky2_pci_read32(hw, PCI_DEV_REG5);
252 /* set all bits to 0 except bits 28 & 27 */
253 reg &= P_CTL_TIM_VMAIN_AV_MSK;
254 sky2_pci_write32(hw, PCI_DEV_REG5, reg);
255
256 sky2_pci_write32(hw, PCI_CFG_REG_1, 0);
257
258 /* Enable workaround for dev 4.107 on Yukon-Ultra & Extreme */
259 reg = sky2_read32(hw, B2_GP_IO);
260 reg |= GLB_GPIO_STAT_RACE_DIS;
261 sky2_write32(hw, B2_GP_IO, reg);
262
263 sky2_read32(hw, B2_GP_IO);
264 }
265 }
266
267 static void sky2_power_aux(struct sky2_hw *hw)
268 {
269 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
270 sky2_write8(hw, B2_Y2_CLK_GATE, 0);
271 else
272 /* enable bits are inverted */
273 sky2_write8(hw, B2_Y2_CLK_GATE,
274 Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
275 Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
276 Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
277
278 /* switch power to VAUX */
279 if (sky2_read16(hw, B0_CTST) & Y2_VAUX_AVAIL)
280 sky2_write8(hw, B0_POWER_CTRL,
281 (PC_VAUX_ENA | PC_VCC_ENA |
282 PC_VAUX_ON | PC_VCC_OFF));
283 }
284
285 static void sky2_gmac_reset(struct sky2_hw *hw, unsigned port)
286 {
287 u16 reg;
288
289 /* disable all GMAC IRQ's */
290 sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), 0);
291
292 gma_write16(hw, port, GM_MC_ADDR_H1, 0); /* clear MC hash */
293 gma_write16(hw, port, GM_MC_ADDR_H2, 0);
294 gma_write16(hw, port, GM_MC_ADDR_H3, 0);
295 gma_write16(hw, port, GM_MC_ADDR_H4, 0);
296
297 reg = gma_read16(hw, port, GM_RX_CTRL);
298 reg |= GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA;
299 gma_write16(hw, port, GM_RX_CTRL, reg);
300 }
301
302 /* flow control to advertise bits */
303 static const u16 copper_fc_adv[] = {
304 [FC_NONE] = 0,
305 [FC_TX] = PHY_M_AN_ASP,
306 [FC_RX] = PHY_M_AN_PC,
307 [FC_BOTH] = PHY_M_AN_PC | PHY_M_AN_ASP,
308 };
309
310 /* flow control to advertise bits when using 1000BaseX */
311 static const u16 fiber_fc_adv[] = {
312 [FC_NONE] = PHY_M_P_NO_PAUSE_X,
313 [FC_TX] = PHY_M_P_ASYM_MD_X,
314 [FC_RX] = PHY_M_P_SYM_MD_X,
315 [FC_BOTH] = PHY_M_P_BOTH_MD_X,
316 };
317
318 /* flow control to GMA disable bits */
319 static const u16 gm_fc_disable[] = {
320 [FC_NONE] = GM_GPCR_FC_RX_DIS | GM_GPCR_FC_TX_DIS,
321 [FC_TX] = GM_GPCR_FC_RX_DIS,
322 [FC_RX] = GM_GPCR_FC_TX_DIS,
323 [FC_BOTH] = 0,
324 };
325
326
327 static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
328 {
329 struct sky2_port *sky2 = netdev_priv(hw->dev[port]);
330 u16 ctrl, ct1000, adv, pg, ledctrl, ledover, reg;
331
332 if (sky2->autoneg == AUTONEG_ENABLE &&
333 !(hw->flags & SKY2_HW_NEWER_PHY)) {
334 u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL);
335
336 ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK |
337 PHY_M_EC_MAC_S_MSK);
338 ectrl |= PHY_M_EC_MAC_S(MAC_TX_CLK_25_MHZ);
339
340 /* on PHY 88E1040 Rev.D0 (and newer) downshift control changed */
341 if (hw->chip_id == CHIP_ID_YUKON_EC)
342 /* set downshift counter to 3x and enable downshift */
343 ectrl |= PHY_M_EC_DSC_2(2) | PHY_M_EC_DOWN_S_ENA;
344 else
345 /* set master & slave downshift counter to 1x */
346 ectrl |= PHY_M_EC_M_DSC(0) | PHY_M_EC_S_DSC(1);
347
348 gm_phy_write(hw, port, PHY_MARV_EXT_CTRL, ectrl);
349 }
350
351 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
352 if (sky2_is_copper(hw)) {
353 if (!(hw->flags & SKY2_HW_GIGABIT)) {
354 /* enable automatic crossover */
355 ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO) >> 1;
356
357 if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
358 hw->chip_rev == CHIP_REV_YU_FE2_A0) {
359 u16 spec;
360
361 /* Enable Class A driver for FE+ A0 */
362 spec = gm_phy_read(hw, port, PHY_MARV_FE_SPEC_2);
363 spec |= PHY_M_FESC_SEL_CL_A;
364 gm_phy_write(hw, port, PHY_MARV_FE_SPEC_2, spec);
365 }
366 } else {
367 /* disable energy detect */
368 ctrl &= ~PHY_M_PC_EN_DET_MSK;
369
370 /* enable automatic crossover */
371 ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO);
372
373 /* downshift on PHY 88E1112 and 88E1149 is changed */
374 if (sky2->autoneg == AUTONEG_ENABLE
375 && (hw->flags & SKY2_HW_NEWER_PHY)) {
376 /* set downshift counter to 3x and enable downshift */
377 ctrl &= ~PHY_M_PC_DSC_MSK;
378 ctrl |= PHY_M_PC_DSC(2) | PHY_M_PC_DOWN_S_ENA;
379 }
380 }
381 } else {
382 /* workaround for deviation #4.88 (CRC errors) */
383 /* disable Automatic Crossover */
384
385 ctrl &= ~PHY_M_PC_MDIX_MSK;
386 }
387
388 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
389
390 /* special setup for PHY 88E1112 Fiber */
391 if (hw->chip_id == CHIP_ID_YUKON_XL && (hw->flags & SKY2_HW_FIBRE_PHY)) {
392 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
393
394 /* Fiber: select 1000BASE-X only mode MAC Specific Ctrl Reg. */
395 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2);
396 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
397 ctrl &= ~PHY_M_MAC_MD_MSK;
398 ctrl |= PHY_M_MAC_MODE_SEL(PHY_M_MAC_MD_1000BX);
399 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
400
401 if (hw->pmd_type == 'P') {
402 /* select page 1 to access Fiber registers */
403 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 1);
404
405 /* for SFP-module set SIGDET polarity to low */
406 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
407 ctrl |= PHY_M_FIB_SIGD_POL;
408 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
409 }
410
411 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
412 }
413
414 ctrl = PHY_CT_RESET;
415 ct1000 = 0;
416 adv = PHY_AN_CSMA;
417 reg = 0;
418
419 if (sky2->autoneg == AUTONEG_ENABLE) {
420 if (sky2_is_copper(hw)) {
421 if (sky2->advertising & ADVERTISED_1000baseT_Full)
422 ct1000 |= PHY_M_1000C_AFD;
423 if (sky2->advertising & ADVERTISED_1000baseT_Half)
424 ct1000 |= PHY_M_1000C_AHD;
425 if (sky2->advertising & ADVERTISED_100baseT_Full)
426 adv |= PHY_M_AN_100_FD;
427 if (sky2->advertising & ADVERTISED_100baseT_Half)
428 adv |= PHY_M_AN_100_HD;
429 if (sky2->advertising & ADVERTISED_10baseT_Full)
430 adv |= PHY_M_AN_10_FD;
431 if (sky2->advertising & ADVERTISED_10baseT_Half)
432 adv |= PHY_M_AN_10_HD;
433
434 adv |= copper_fc_adv[sky2->flow_mode];
435 } else { /* special defines for FIBER (88E1040S only) */
436 if (sky2->advertising & ADVERTISED_1000baseT_Full)
437 adv |= PHY_M_AN_1000X_AFD;
438 if (sky2->advertising & ADVERTISED_1000baseT_Half)
439 adv |= PHY_M_AN_1000X_AHD;
440
441 adv |= fiber_fc_adv[sky2->flow_mode];
442 }
443
444 /* Restart Auto-negotiation */
445 ctrl |= PHY_CT_ANE | PHY_CT_RE_CFG;
446 } else {
447 /* forced speed/duplex settings */
448 ct1000 = PHY_M_1000C_MSE;
449
450 /* Disable auto update for duplex flow control and speed */
451 reg |= GM_GPCR_AU_ALL_DIS;
452
453 switch (sky2->speed) {
454 case SPEED_1000:
455 ctrl |= PHY_CT_SP1000;
456 reg |= GM_GPCR_SPEED_1000;
457 break;
458 case SPEED_100:
459 ctrl |= PHY_CT_SP100;
460 reg |= GM_GPCR_SPEED_100;
461 break;
462 }
463
464 if (sky2->duplex == DUPLEX_FULL) {
465 reg |= GM_GPCR_DUP_FULL;
466 ctrl |= PHY_CT_DUP_MD;
467 } else if (sky2->speed < SPEED_1000)
468 sky2->flow_mode = FC_NONE;
469
470
471 reg |= gm_fc_disable[sky2->flow_mode];
472
473 /* Forward pause packets to GMAC? */
474 if (sky2->flow_mode & FC_RX)
475 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON);
476 else
477 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
478 }
479
480 gma_write16(hw, port, GM_GP_CTRL, reg);
481
482 if (hw->flags & SKY2_HW_GIGABIT)
483 gm_phy_write(hw, port, PHY_MARV_1000T_CTRL, ct1000);
484
485 gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, adv);
486 gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl);
487
488 /* Setup Phy LED's */
489 ledctrl = PHY_M_LED_PULS_DUR(PULS_170MS);
490 ledover = 0;
491
492 switch (hw->chip_id) {
493 case CHIP_ID_YUKON_FE:
494 /* on 88E3082 these bits are at 11..9 (shifted left) */
495 ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) << 1;
496
497 ctrl = gm_phy_read(hw, port, PHY_MARV_FE_LED_PAR);
498
499 /* delete ACT LED control bits */
500 ctrl &= ~PHY_M_FELP_LED1_MSK;
501 /* change ACT LED control to blink mode */
502 ctrl |= PHY_M_FELP_LED1_CTRL(LED_PAR_CTRL_ACT_BL);
503 gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR, ctrl);
504 break;
505
506 case CHIP_ID_YUKON_FE_P:
507 /* Enable Link Partner Next Page */
508 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
509 ctrl |= PHY_M_PC_ENA_LIP_NP;
510
511 /* disable Energy Detect and enable scrambler */
512 ctrl &= ~(PHY_M_PC_ENA_ENE_DT | PHY_M_PC_DIS_SCRAMB);
513 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
514
515 /* set LED2 -> ACT, LED1 -> LINK, LED0 -> SPEED */
516 ctrl = PHY_M_FELP_LED2_CTRL(LED_PAR_CTRL_ACT_BL) |
517 PHY_M_FELP_LED1_CTRL(LED_PAR_CTRL_LINK) |
518 PHY_M_FELP_LED0_CTRL(LED_PAR_CTRL_SPEED);
519
520 gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR, ctrl);
521 break;
522
523 case CHIP_ID_YUKON_XL:
524 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
525
526 /* select page 3 to access LED control register */
527 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
528
529 /* set LED Function Control register */
530 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
531 (PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */
532 PHY_M_LEDC_INIT_CTRL(7) | /* 10 Mbps */
533 PHY_M_LEDC_STA1_CTRL(7) | /* 100 Mbps */
534 PHY_M_LEDC_STA0_CTRL(7))); /* 1000 Mbps */
535
536 /* set Polarity Control register */
537 gm_phy_write(hw, port, PHY_MARV_PHY_STAT,
538 (PHY_M_POLC_LS1_P_MIX(4) |
539 PHY_M_POLC_IS0_P_MIX(4) |
540 PHY_M_POLC_LOS_CTRL(2) |
541 PHY_M_POLC_INIT_CTRL(2) |
542 PHY_M_POLC_STA1_CTRL(2) |
543 PHY_M_POLC_STA0_CTRL(2)));
544
545 /* restore page register */
546 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
547 break;
548
549 case CHIP_ID_YUKON_EC_U:
550 case CHIP_ID_YUKON_EX:
551 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
552
553 /* select page 3 to access LED control register */
554 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
555
556 /* set LED Function Control register */
557 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
558 (PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */
559 PHY_M_LEDC_INIT_CTRL(8) | /* 10 Mbps */
560 PHY_M_LEDC_STA1_CTRL(7) | /* 100 Mbps */
561 PHY_M_LEDC_STA0_CTRL(7)));/* 1000 Mbps */
562
563 /* set Blink Rate in LED Timer Control Register */
564 gm_phy_write(hw, port, PHY_MARV_INT_MASK,
565 ledctrl | PHY_M_LED_BLINK_RT(BLINK_84MS));
566 /* restore page register */
567 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
568 break;
569
570 default:
571 /* set Tx LED (LED_TX) to blink mode on Rx OR Tx activity */
572 ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL;
573 /* turn off the Rx LED (LED_RX) */
574 ledover &= ~PHY_M_LED_MO_RX;
575 }
576
577 if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
578 hw->chip_rev == CHIP_REV_YU_EC_U_A1) {
579 /* apply fixes in PHY AFE */
580 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 255);
581
582 /* increase differential signal amplitude in 10BASE-T */
583 gm_phy_write(hw, port, 0x18, 0xaa99);
584 gm_phy_write(hw, port, 0x17, 0x2011);
585
586 /* fix for IEEE A/B Symmetry failure in 1000BASE-T */
587 gm_phy_write(hw, port, 0x18, 0xa204);
588 gm_phy_write(hw, port, 0x17, 0x2002);
589
590 /* set page register to 0 */
591 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
592 } else if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
593 hw->chip_rev == CHIP_REV_YU_FE2_A0) {
594 /* apply workaround for integrated resistors calibration */
595 gm_phy_write(hw, port, PHY_MARV_PAGE_ADDR, 17);
596 gm_phy_write(hw, port, PHY_MARV_PAGE_DATA, 0x3f60);
597 } else if (hw->chip_id != CHIP_ID_YUKON_EX) {
598 /* no effect on Yukon-XL */
599 gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
600
601 if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) {
602 /* turn on 100 Mbps LED (LED_LINK100) */
603 ledover |= PHY_M_LED_MO_100;
604 }
605
606 if (ledover)
607 gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
608
609 }
610
611 /* Enable phy interrupt on auto-negotiation complete (or link up) */
612 if (sky2->autoneg == AUTONEG_ENABLE)
613 gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL);
614 else
615 gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
616 }
617
618 static void sky2_phy_power(struct sky2_hw *hw, unsigned port, int onoff)
619 {
620 u32 reg1;
621 static const u32 phy_power[] = { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD };
622 static const u32 coma_mode[] = { PCI_Y2_PHY1_COMA, PCI_Y2_PHY2_COMA };
623
624 reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
625 /* Turn on/off phy power saving */
626 if (onoff)
627 reg1 &= ~phy_power[port];
628 else
629 reg1 |= phy_power[port];
630
631 if (onoff && hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
632 reg1 |= coma_mode[port];
633
634 sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
635 reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
636
637 udelay(100);
638 }
639
640 /* Force a renegotiation */
641 static void sky2_phy_reinit(struct sky2_port *sky2)
642 {
643 spin_lock_bh(&sky2->phy_lock);
644 sky2_phy_init(sky2->hw, sky2->port);
645 spin_unlock_bh(&sky2->phy_lock);
646 }
647
648 /* Put device in state to listen for Wake On Lan */
649 static void sky2_wol_init(struct sky2_port *sky2)
650 {
651 struct sky2_hw *hw = sky2->hw;
652 unsigned port = sky2->port;
653 enum flow_control save_mode;
654 u16 ctrl;
655 u32 reg1;
656
657 /* Bring hardware out of reset */
658 sky2_write16(hw, B0_CTST, CS_RST_CLR);
659 sky2_write16(hw, SK_REG(port, GMAC_LINK_CTRL), GMLC_RST_CLR);
660
661 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
662 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
663
664 /* Force to 10/100
665 * sky2_reset will re-enable on resume
666 */
667 save_mode = sky2->flow_mode;
668 ctrl = sky2->advertising;
669
670 sky2->advertising &= ~(ADVERTISED_1000baseT_Half|ADVERTISED_1000baseT_Full);
671 sky2->flow_mode = FC_NONE;
672 sky2_phy_power(hw, port, 1);
673 sky2_phy_reinit(sky2);
674
675 sky2->flow_mode = save_mode;
676 sky2->advertising = ctrl;
677
678 /* Set GMAC to no flow control and auto update for speed/duplex */
679 gma_write16(hw, port, GM_GP_CTRL,
680 GM_GPCR_FC_TX_DIS|GM_GPCR_TX_ENA|GM_GPCR_RX_ENA|
681 GM_GPCR_DUP_FULL|GM_GPCR_FC_RX_DIS|GM_GPCR_AU_FCT_DIS);
682
683 /* Set WOL address */
684 memcpy_toio(hw->regs + WOL_REGS(port, WOL_MAC_ADDR),
685 sky2->netdev->dev_addr, ETH_ALEN);
686
687 /* Turn on appropriate WOL control bits */
688 sky2_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), WOL_CTL_CLEAR_RESULT);
689 ctrl = 0;
690 if (sky2->wol & WAKE_PHY)
691 ctrl |= WOL_CTL_ENA_PME_ON_LINK_CHG|WOL_CTL_ENA_LINK_CHG_UNIT;
692 else
693 ctrl |= WOL_CTL_DIS_PME_ON_LINK_CHG|WOL_CTL_DIS_LINK_CHG_UNIT;
694
695 if (sky2->wol & WAKE_MAGIC)
696 ctrl |= WOL_CTL_ENA_PME_ON_MAGIC_PKT|WOL_CTL_ENA_MAGIC_PKT_UNIT;
697 else
698 ctrl |= WOL_CTL_DIS_PME_ON_MAGIC_PKT|WOL_CTL_DIS_MAGIC_PKT_UNIT;;
699
700 ctrl |= WOL_CTL_DIS_PME_ON_PATTERN|WOL_CTL_DIS_PATTERN_UNIT;
701 sky2_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), ctrl);
702
703 /* Turn on legacy PCI-Express PME mode */
704 reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
705 reg1 |= PCI_Y2_PME_LEGACY;
706 sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
707
708 /* block receiver */
709 sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
710
711 }
712
713 static void sky2_set_tx_stfwd(struct sky2_hw *hw, unsigned port)
714 {
715 struct net_device *dev = hw->dev[port];
716
717 if (dev->mtu <= ETH_DATA_LEN)
718 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
719 TX_JUMBO_DIS | TX_STFW_ENA);
720
721 else if (hw->chip_id != CHIP_ID_YUKON_EC_U)
722 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
723 TX_STFW_ENA | TX_JUMBO_ENA);
724 else {
725 /* set Tx GMAC FIFO Almost Empty Threshold */
726 sky2_write32(hw, SK_REG(port, TX_GMF_AE_THR),
727 (ECU_JUMBO_WM << 16) | ECU_AE_THR);
728
729 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
730 TX_JUMBO_ENA | TX_STFW_DIS);
731
732 /* Can't do offload because of lack of store/forward */
733 dev->features &= ~(NETIF_F_TSO | NETIF_F_SG | NETIF_F_ALL_CSUM);
734 }
735 }
736
737 static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
738 {
739 struct sky2_port *sky2 = netdev_priv(hw->dev[port]);
740 u16 reg;
741 u32 rx_reg;
742 int i;
743 const u8 *addr = hw->dev[port]->dev_addr;
744
745 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET);
746 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
747
748 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
749
750 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0 && port == 1) {
751 /* WA DEV_472 -- looks like crossed wires on port 2 */
752 /* clear GMAC 1 Control reset */
753 sky2_write8(hw, SK_REG(0, GMAC_CTRL), GMC_RST_CLR);
754 do {
755 sky2_write8(hw, SK_REG(1, GMAC_CTRL), GMC_RST_SET);
756 sky2_write8(hw, SK_REG(1, GMAC_CTRL), GMC_RST_CLR);
757 } while (gm_phy_read(hw, 1, PHY_MARV_ID0) != PHY_MARV_ID0_VAL ||
758 gm_phy_read(hw, 1, PHY_MARV_ID1) != PHY_MARV_ID1_Y2 ||
759 gm_phy_read(hw, 1, PHY_MARV_INT_MASK) != 0);
760 }
761
762 sky2_read16(hw, SK_REG(port, GMAC_IRQ_SRC));
763
764 /* Enable Transmit FIFO Underrun */
765 sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), GMAC_DEF_MSK);
766
767 spin_lock_bh(&sky2->phy_lock);
768 sky2_phy_init(hw, port);
769 spin_unlock_bh(&sky2->phy_lock);
770
771 /* MIB clear */
772 reg = gma_read16(hw, port, GM_PHY_ADDR);
773 gma_write16(hw, port, GM_PHY_ADDR, reg | GM_PAR_MIB_CLR);
774
775 for (i = GM_MIB_CNT_BASE; i <= GM_MIB_CNT_END; i += 4)
776 gma_read16(hw, port, i);
777 gma_write16(hw, port, GM_PHY_ADDR, reg);
778
779 /* transmit control */
780 gma_write16(hw, port, GM_TX_CTRL, TX_COL_THR(TX_COL_DEF));
781
782 /* receive control reg: unicast + multicast + no FCS */
783 gma_write16(hw, port, GM_RX_CTRL,
784 GM_RXCR_UCF_ENA | GM_RXCR_CRC_DIS | GM_RXCR_MCF_ENA);
785
786 /* transmit flow control */
787 gma_write16(hw, port, GM_TX_FLOW_CTRL, 0xffff);
788
789 /* transmit parameter */
790 gma_write16(hw, port, GM_TX_PARAM,
791 TX_JAM_LEN_VAL(TX_JAM_LEN_DEF) |
792 TX_JAM_IPG_VAL(TX_JAM_IPG_DEF) |
793 TX_IPG_JAM_DATA(TX_IPG_JAM_DEF) |
794 TX_BACK_OFF_LIM(TX_BOF_LIM_DEF));
795
796 /* serial mode register */
797 reg = DATA_BLIND_VAL(DATA_BLIND_DEF) |
798 GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF);
799
800 if (hw->dev[port]->mtu > ETH_DATA_LEN)
801 reg |= GM_SMOD_JUMBO_ENA;
802
803 gma_write16(hw, port, GM_SERIAL_MODE, reg);
804
805 /* virtual address for data */
806 gma_set_addr(hw, port, GM_SRC_ADDR_2L, addr);
807
808 /* physical address: used for pause frames */
809 gma_set_addr(hw, port, GM_SRC_ADDR_1L, addr);
810
811 /* ignore counter overflows */
812 gma_write16(hw, port, GM_TX_IRQ_MSK, 0);
813 gma_write16(hw, port, GM_RX_IRQ_MSK, 0);
814 gma_write16(hw, port, GM_TR_IRQ_MSK, 0);
815
816 /* Configure Rx MAC FIFO */
817 sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR);
818 rx_reg = GMF_OPER_ON | GMF_RX_F_FL_ON;
819 if (hw->chip_id == CHIP_ID_YUKON_EX ||
820 hw->chip_id == CHIP_ID_YUKON_FE_P)
821 rx_reg |= GMF_RX_OVER_ON;
822
823 sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), rx_reg);
824
825 if (hw->chip_id == CHIP_ID_YUKON_XL) {
826 /* Hardware errata - clear flush mask */
827 sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), 0);
828 } else {
829 /* Flush Rx MAC FIFO on any flow control or error */
830 sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR);
831 }
832
833 /* Set threshold to 0xa (64 bytes) + 1 to workaround pause bug */
834 reg = RX_GMF_FL_THR_DEF + 1;
835 /* Another magic mystery workaround from sk98lin */
836 if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
837 hw->chip_rev == CHIP_REV_YU_FE2_A0)
838 reg = 0x178;
839 sky2_write16(hw, SK_REG(port, RX_GMF_FL_THR), reg);
840
841 /* Configure Tx MAC FIFO */
842 sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR);
843 sky2_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON);
844
845 /* On chips without ram buffer, pause is controled by MAC level */
846 if (sky2_read8(hw, B2_E_0) == 0) {
847 sky2_write8(hw, SK_REG(port, RX_GMF_LP_THR), 768/8);
848 sky2_write8(hw, SK_REG(port, RX_GMF_UP_THR), 1024/8);
849
850 sky2_set_tx_stfwd(hw, port);
851 }
852
853 if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
854 hw->chip_rev == CHIP_REV_YU_FE2_A0) {
855 /* disable dynamic watermark */
856 reg = sky2_read16(hw, SK_REG(port, TX_GMF_EA));
857 reg &= ~TX_DYN_WM_ENA;
858 sky2_write16(hw, SK_REG(port, TX_GMF_EA), reg);
859 }
860 }
861
862 /* Assign Ram Buffer allocation to queue */
863 static void sky2_ramset(struct sky2_hw *hw, u16 q, u32 start, u32 space)
864 {
865 u32 end;
866
867 /* convert from K bytes to qwords used for hw register */
868 start *= 1024/8;
869 space *= 1024/8;
870 end = start + space - 1;
871
872 sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_RST_CLR);
873 sky2_write32(hw, RB_ADDR(q, RB_START), start);
874 sky2_write32(hw, RB_ADDR(q, RB_END), end);
875 sky2_write32(hw, RB_ADDR(q, RB_WP), start);
876 sky2_write32(hw, RB_ADDR(q, RB_RP), start);
877
878 if (q == Q_R1 || q == Q_R2) {
879 u32 tp = space - space/4;
880
881 /* On receive queue's set the thresholds
882 * give receiver priority when > 3/4 full
883 * send pause when down to 2K
884 */
885 sky2_write32(hw, RB_ADDR(q, RB_RX_UTHP), tp);
886 sky2_write32(hw, RB_ADDR(q, RB_RX_LTHP), space/2);
887
888 tp = space - 2048/8;
889 sky2_write32(hw, RB_ADDR(q, RB_RX_UTPP), tp);
890 sky2_write32(hw, RB_ADDR(q, RB_RX_LTPP), space/4);
891 } else {
892 /* Enable store & forward on Tx queue's because
893 * Tx FIFO is only 1K on Yukon
894 */
895 sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_STFWD);
896 }
897
898 sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_OP_MD);
899 sky2_read8(hw, RB_ADDR(q, RB_CTRL));
900 }
901
902 /* Setup Bus Memory Interface */
903 static void sky2_qset(struct sky2_hw *hw, u16 q)
904 {
905 sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_CLR_RESET);
906 sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_OPER_INIT);
907 sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_FIFO_OP_ON);
908 sky2_write32(hw, Q_ADDR(q, Q_WM), BMU_WM_DEFAULT);
909 }
910
911 /* Setup prefetch unit registers. This is the interface between
912 * hardware and driver list elements
913 */
914 static void sky2_prefetch_init(struct sky2_hw *hw, u32 qaddr,
915 u64 addr, u32 last)
916 {
917 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_RST_SET);
918 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_RST_CLR);
919 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_HI), addr >> 32);
920 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_LO), (u32) addr);
921 sky2_write16(hw, Y2_QADDR(qaddr, PREF_UNIT_LAST_IDX), last);
922 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_OP_ON);
923
924 sky2_read32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL));
925 }
926
927 static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2)
928 {
929 struct sky2_tx_le *le = sky2->tx_le + sky2->tx_prod;
930
931 sky2->tx_prod = RING_NEXT(sky2->tx_prod, TX_RING_SIZE);
932 le->ctrl = 0;
933 return le;
934 }
935
936 static void tx_init(struct sky2_port *sky2)
937 {
938 struct sky2_tx_le *le;
939
940 sky2->tx_prod = sky2->tx_cons = 0;
941 sky2->tx_tcpsum = 0;
942 sky2->tx_last_mss = 0;
943
944 le = get_tx_le(sky2);
945 le->addr = 0;
946 le->opcode = OP_ADDR64 | HW_OWNER;
947 }
948
949 static inline struct tx_ring_info *tx_le_re(struct sky2_port *sky2,
950 struct sky2_tx_le *le)
951 {
952 return sky2->tx_ring + (le - sky2->tx_le);
953 }
954
955 /* Update chip's next pointer */
956 static inline void sky2_put_idx(struct sky2_hw *hw, unsigned q, u16 idx)
957 {
958 /* Make sure write' to descriptors are complete before we tell hardware */
959 wmb();
960 sky2_write16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX), idx);
961
962 /* Synchronize I/O on since next processor may write to tail */
963 mmiowb();
964 }
965
966
967 static inline struct sky2_rx_le *sky2_next_rx(struct sky2_port *sky2)
968 {
969 struct sky2_rx_le *le = sky2->rx_le + sky2->rx_put;
970 sky2->rx_put = RING_NEXT(sky2->rx_put, RX_LE_SIZE);
971 le->ctrl = 0;
972 return le;
973 }
974
975 /* Build description to hardware for one receive segment */
976 static void sky2_rx_add(struct sky2_port *sky2, u8 op,
977 dma_addr_t map, unsigned len)
978 {
979 struct sky2_rx_le *le;
980
981 if (sizeof(dma_addr_t) > sizeof(u32)) {
982 le = sky2_next_rx(sky2);
983 le->addr = cpu_to_le32(upper_32_bits(map));
984 le->opcode = OP_ADDR64 | HW_OWNER;
985 }
986
987 le = sky2_next_rx(sky2);
988 le->addr = cpu_to_le32((u32) map);
989 le->length = cpu_to_le16(len);
990 le->opcode = op | HW_OWNER;
991 }
992
993 /* Build description to hardware for one possibly fragmented skb */
994 static void sky2_rx_submit(struct sky2_port *sky2,
995 const struct rx_ring_info *re)
996 {
997 int i;
998
999 sky2_rx_add(sky2, OP_PACKET, re->data_addr, sky2->rx_data_size);
1000
1001 for (i = 0; i < skb_shinfo(re->skb)->nr_frags; i++)
1002 sky2_rx_add(sky2, OP_BUFFER, re->frag_addr[i], PAGE_SIZE);
1003 }
1004
1005
1006 static void sky2_rx_map_skb(struct pci_dev *pdev, struct rx_ring_info *re,
1007 unsigned size)
1008 {
1009 struct sk_buff *skb = re->skb;
1010 int i;
1011
1012 re->data_addr = pci_map_single(pdev, skb->data, size, PCI_DMA_FROMDEVICE);
1013 pci_unmap_len_set(re, data_size, size);
1014
1015 for (i = 0; i < skb_shinfo(skb)->nr_frags; i++)
1016 re->frag_addr[i] = pci_map_page(pdev,
1017 skb_shinfo(skb)->frags[i].page,
1018 skb_shinfo(skb)->frags[i].page_offset,
1019 skb_shinfo(skb)->frags[i].size,
1020 PCI_DMA_FROMDEVICE);
1021 }
1022
1023 static void sky2_rx_unmap_skb(struct pci_dev *pdev, struct rx_ring_info *re)
1024 {
1025 struct sk_buff *skb = re->skb;
1026 int i;
1027
1028 pci_unmap_single(pdev, re->data_addr, pci_unmap_len(re, data_size),
1029 PCI_DMA_FROMDEVICE);
1030
1031 for (i = 0; i < skb_shinfo(skb)->nr_frags; i++)
1032 pci_unmap_page(pdev, re->frag_addr[i],
1033 skb_shinfo(skb)->frags[i].size,
1034 PCI_DMA_FROMDEVICE);
1035 }
1036
1037 /* Tell chip where to start receive checksum.
1038 * Actually has two checksums, but set both same to avoid possible byte
1039 * order problems.
1040 */
1041 static void rx_set_checksum(struct sky2_port *sky2)
1042 {
1043 struct sky2_rx_le *le = sky2_next_rx(sky2);
1044
1045 le->addr = cpu_to_le32((ETH_HLEN << 16) | ETH_HLEN);
1046 le->ctrl = 0;
1047 le->opcode = OP_TCPSTART | HW_OWNER;
1048
1049 sky2_write32(sky2->hw,
1050 Q_ADDR(rxqaddr[sky2->port], Q_CSR),
1051 sky2->rx_csum ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
1052 }
1053
1054 /*
1055 * The RX Stop command will not work for Yukon-2 if the BMU does not
1056 * reach the end of packet and since we can't make sure that we have
1057 * incoming data, we must reset the BMU while it is not doing a DMA
1058 * transfer. Since it is possible that the RX path is still active,
1059 * the RX RAM buffer will be stopped first, so any possible incoming
1060 * data will not trigger a DMA. After the RAM buffer is stopped, the
1061 * BMU is polled until any DMA in progress is ended and only then it
1062 * will be reset.
1063 */
1064 static void sky2_rx_stop(struct sky2_port *sky2)
1065 {
1066 struct sky2_hw *hw = sky2->hw;
1067 unsigned rxq = rxqaddr[sky2->port];
1068 int i;
1069
1070 /* disable the RAM Buffer receive queue */
1071 sky2_write8(hw, RB_ADDR(rxq, RB_CTRL), RB_DIS_OP_MD);
1072
1073 for (i = 0; i < 0xffff; i++)
1074 if (sky2_read8(hw, RB_ADDR(rxq, Q_RSL))
1075 == sky2_read8(hw, RB_ADDR(rxq, Q_RL)))
1076 goto stopped;
1077
1078 printk(KERN_WARNING PFX "%s: receiver stop failed\n",
1079 sky2->netdev->name);
1080 stopped:
1081 sky2_write32(hw, Q_ADDR(rxq, Q_CSR), BMU_RST_SET | BMU_FIFO_RST);
1082
1083 /* reset the Rx prefetch unit */
1084 sky2_write32(hw, Y2_QADDR(rxq, PREF_UNIT_CTRL), PREF_UNIT_RST_SET);
1085 mmiowb();
1086 }
1087
1088 /* Clean out receive buffer area, assumes receiver hardware stopped */
1089 static void sky2_rx_clean(struct sky2_port *sky2)
1090 {
1091 unsigned i;
1092
1093 memset(sky2->rx_le, 0, RX_LE_BYTES);
1094 for (i = 0; i < sky2->rx_pending; i++) {
1095 struct rx_ring_info *re = sky2->rx_ring + i;
1096
1097 if (re->skb) {
1098 sky2_rx_unmap_skb(sky2->hw->pdev, re);
1099 kfree_skb(re->skb);
1100 re->skb = NULL;
1101 }
1102 }
1103 }
1104
1105 /* Basic MII support */
1106 static int sky2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
1107 {
1108 struct mii_ioctl_data *data = if_mii(ifr);
1109 struct sky2_port *sky2 = netdev_priv(dev);
1110 struct sky2_hw *hw = sky2->hw;
1111 int err = -EOPNOTSUPP;
1112
1113 if (!netif_running(dev))
1114 return -ENODEV; /* Phy still in reset */
1115
1116 switch (cmd) {
1117 case SIOCGMIIPHY:
1118 data->phy_id = PHY_ADDR_MARV;
1119
1120 /* fallthru */
1121 case SIOCGMIIREG: {
1122 u16 val = 0;
1123
1124 spin_lock_bh(&sky2->phy_lock);
1125 err = __gm_phy_read(hw, sky2->port, data->reg_num & 0x1f, &val);
1126 spin_unlock_bh(&sky2->phy_lock);
1127
1128 data->val_out = val;
1129 break;
1130 }
1131
1132 case SIOCSMIIREG:
1133 if (!capable(CAP_NET_ADMIN))
1134 return -EPERM;
1135
1136 spin_lock_bh(&sky2->phy_lock);
1137 err = gm_phy_write(hw, sky2->port, data->reg_num & 0x1f,
1138 data->val_in);
1139 spin_unlock_bh(&sky2->phy_lock);
1140 break;
1141 }
1142 return err;
1143 }
1144
1145 #ifdef SKY2_VLAN_TAG_USED
1146 static void sky2_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
1147 {
1148 struct sky2_port *sky2 = netdev_priv(dev);
1149 struct sky2_hw *hw = sky2->hw;
1150 u16 port = sky2->port;
1151
1152 netif_tx_lock_bh(dev);
1153 napi_disable(&hw->napi);
1154
1155 sky2->vlgrp = grp;
1156 if (grp) {
1157 sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
1158 RX_VLAN_STRIP_ON);
1159 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
1160 TX_VLAN_TAG_ON);
1161 } else {
1162 sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
1163 RX_VLAN_STRIP_OFF);
1164 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
1165 TX_VLAN_TAG_OFF);
1166 }
1167
1168 sky2_read32(hw, B0_Y2_SP_LISR);
1169 napi_enable(&hw->napi);
1170 netif_tx_unlock_bh(dev);
1171 }
1172 #endif
1173
1174 /*
1175 * Allocate an skb for receiving. If the MTU is large enough
1176 * make the skb non-linear with a fragment list of pages.
1177 *
1178 * It appears the hardware has a bug in the FIFO logic that
1179 * cause it to hang if the FIFO gets overrun and the receive buffer
1180 * is not 64 byte aligned. The buffer returned from netdev_alloc_skb is
1181 * aligned except if slab debugging is enabled.
1182 */
1183 static struct sk_buff *sky2_rx_alloc(struct sky2_port *sky2)
1184 {
1185 struct sk_buff *skb;
1186 unsigned long p;
1187 int i;
1188
1189 skb = netdev_alloc_skb(sky2->netdev, sky2->rx_data_size + RX_SKB_ALIGN);
1190 if (!skb)
1191 goto nomem;
1192
1193 p = (unsigned long) skb->data;
1194 skb_reserve(skb, ALIGN(p, RX_SKB_ALIGN) - p);
1195
1196 for (i = 0; i < sky2->rx_nfrags; i++) {
1197 struct page *page = alloc_page(GFP_ATOMIC);
1198
1199 if (!page)
1200 goto free_partial;
1201 skb_fill_page_desc(skb, i, page, 0, PAGE_SIZE);
1202 }
1203
1204 return skb;
1205 free_partial:
1206 kfree_skb(skb);
1207 nomem:
1208 return NULL;
1209 }
1210
1211 static inline void sky2_rx_update(struct sky2_port *sky2, unsigned rxq)
1212 {
1213 sky2_put_idx(sky2->hw, rxq, sky2->rx_put);
1214 }
1215
1216 /*
1217 * Allocate and setup receiver buffer pool.
1218 * Normal case this ends up creating one list element for skb
1219 * in the receive ring. Worst case if using large MTU and each
1220 * allocation falls on a different 64 bit region, that results
1221 * in 6 list elements per ring entry.
1222 * One element is used for checksum enable/disable, and one
1223 * extra to avoid wrap.
1224 */
1225 static int sky2_rx_start(struct sky2_port *sky2)
1226 {
1227 struct sky2_hw *hw = sky2->hw;
1228 struct rx_ring_info *re;
1229 unsigned rxq = rxqaddr[sky2->port];
1230 unsigned i, size, space, thresh;
1231
1232 sky2->rx_put = sky2->rx_next = 0;
1233 sky2_qset(hw, rxq);
1234
1235 /* On PCI express lowering the watermark gives better performance */
1236 if (pci_find_capability(hw->pdev, PCI_CAP_ID_EXP))
1237 sky2_write32(hw, Q_ADDR(rxq, Q_WM), BMU_WM_PEX);
1238
1239 /* These chips have no ram buffer?
1240 * MAC Rx RAM Read is controlled by hardware */
1241 if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
1242 (hw->chip_rev == CHIP_REV_YU_EC_U_A1
1243 || hw->chip_rev == CHIP_REV_YU_EC_U_B0))
1244 sky2_write32(hw, Q_ADDR(rxq, Q_TEST), F_M_RX_RAM_DIS);
1245
1246 sky2_prefetch_init(hw, rxq, sky2->rx_le_map, RX_LE_SIZE - 1);
1247
1248 if (!(hw->flags & SKY2_HW_NEW_LE))
1249 rx_set_checksum(sky2);
1250
1251 /* Space needed for frame data + headers rounded up */
1252 size = roundup(sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN, 8);
1253
1254 /* Stopping point for hardware truncation */
1255 thresh = (size - 8) / sizeof(u32);
1256
1257 /* Account for overhead of skb - to avoid order > 0 allocation */
1258 space = SKB_DATA_ALIGN(size) + NET_SKB_PAD
1259 + sizeof(struct skb_shared_info);
1260
1261 sky2->rx_nfrags = space >> PAGE_SHIFT;
1262 BUG_ON(sky2->rx_nfrags > ARRAY_SIZE(re->frag_addr));
1263
1264 if (sky2->rx_nfrags != 0) {
1265 /* Compute residue after pages */
1266 space = sky2->rx_nfrags << PAGE_SHIFT;
1267
1268 if (space < size)
1269 size -= space;
1270 else
1271 size = 0;
1272
1273 /* Optimize to handle small packets and headers */
1274 if (size < copybreak)
1275 size = copybreak;
1276 if (size < ETH_HLEN)
1277 size = ETH_HLEN;
1278 }
1279 sky2->rx_data_size = size;
1280
1281 /* Fill Rx ring */
1282 for (i = 0; i < sky2->rx_pending; i++) {
1283 re = sky2->rx_ring + i;
1284
1285 re->skb = sky2_rx_alloc(sky2);
1286 if (!re->skb)
1287 goto nomem;
1288
1289 sky2_rx_map_skb(hw->pdev, re, sky2->rx_data_size);
1290 sky2_rx_submit(sky2, re);
1291 }
1292
1293 /*
1294 * The receiver hangs if it receives frames larger than the
1295 * packet buffer. As a workaround, truncate oversize frames, but
1296 * the register is limited to 9 bits, so if you do frames > 2052
1297 * you better get the MTU right!
1298 */
1299 if (thresh > 0x1ff)
1300 sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_OFF);
1301 else {
1302 sky2_write16(hw, SK_REG(sky2->port, RX_GMF_TR_THR), thresh);
1303 sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_ON);
1304 }
1305
1306 /* Tell chip about available buffers */
1307 sky2_rx_update(sky2, rxq);
1308 return 0;
1309 nomem:
1310 sky2_rx_clean(sky2);
1311 return -ENOMEM;
1312 }
1313
1314 /* Bring up network interface. */
1315 static int sky2_up(struct net_device *dev)
1316 {
1317 struct sky2_port *sky2 = netdev_priv(dev);
1318 struct sky2_hw *hw = sky2->hw;
1319 unsigned port = sky2->port;
1320 u32 imask, ramsize;
1321 int cap, err = -ENOMEM;
1322 struct net_device *otherdev = hw->dev[sky2->port^1];
1323
1324 /*
1325 * On dual port PCI-X card, there is an problem where status
1326 * can be received out of order due to split transactions
1327 */
1328 if (otherdev && netif_running(otherdev) &&
1329 (cap = pci_find_capability(hw->pdev, PCI_CAP_ID_PCIX))) {
1330 u16 cmd;
1331
1332 cmd = sky2_pci_read16(hw, cap + PCI_X_CMD);
1333 cmd &= ~PCI_X_CMD_MAX_SPLIT;
1334 sky2_pci_write16(hw, cap + PCI_X_CMD, cmd);
1335
1336 }
1337
1338 if (netif_msg_ifup(sky2))
1339 printk(KERN_INFO PFX "%s: enabling interface\n", dev->name);
1340
1341 netif_carrier_off(dev);
1342
1343 /* must be power of 2 */
1344 sky2->tx_le = pci_alloc_consistent(hw->pdev,
1345 TX_RING_SIZE *
1346 sizeof(struct sky2_tx_le),
1347 &sky2->tx_le_map);
1348 if (!sky2->tx_le)
1349 goto err_out;
1350
1351 sky2->tx_ring = kcalloc(TX_RING_SIZE, sizeof(struct tx_ring_info),
1352 GFP_KERNEL);
1353 if (!sky2->tx_ring)
1354 goto err_out;
1355
1356 tx_init(sky2);
1357
1358 sky2->rx_le = pci_alloc_consistent(hw->pdev, RX_LE_BYTES,
1359 &sky2->rx_le_map);
1360 if (!sky2->rx_le)
1361 goto err_out;
1362 memset(sky2->rx_le, 0, RX_LE_BYTES);
1363
1364 sky2->rx_ring = kcalloc(sky2->rx_pending, sizeof(struct rx_ring_info),
1365 GFP_KERNEL);
1366 if (!sky2->rx_ring)
1367 goto err_out;
1368
1369 sky2_phy_power(hw, port, 1);
1370
1371 sky2_mac_init(hw, port);
1372
1373 /* Register is number of 4K blocks on internal RAM buffer. */
1374 ramsize = sky2_read8(hw, B2_E_0) * 4;
1375 if (ramsize > 0) {
1376 u32 rxspace;
1377
1378 pr_debug(PFX "%s: ram buffer %dK\n", dev->name, ramsize);
1379 if (ramsize < 16)
1380 rxspace = ramsize / 2;
1381 else
1382 rxspace = 8 + (2*(ramsize - 16))/3;
1383
1384 sky2_ramset(hw, rxqaddr[port], 0, rxspace);
1385 sky2_ramset(hw, txqaddr[port], rxspace, ramsize - rxspace);
1386
1387 /* Make sure SyncQ is disabled */
1388 sky2_write8(hw, RB_ADDR(port == 0 ? Q_XS1 : Q_XS2, RB_CTRL),
1389 RB_RST_SET);
1390 }
1391
1392 sky2_qset(hw, txqaddr[port]);
1393
1394 /* This is copied from sk98lin 10.0.5.3; no one tells me about erratta's */
1395 if (hw->chip_id == CHIP_ID_YUKON_EX && hw->chip_rev == CHIP_REV_YU_EX_B0)
1396 sky2_write32(hw, Q_ADDR(txqaddr[port], Q_TEST), F_TX_CHK_AUTO_OFF);
1397
1398 /* Set almost empty threshold */
1399 if (hw->chip_id == CHIP_ID_YUKON_EC_U
1400 && hw->chip_rev == CHIP_REV_YU_EC_U_A0)
1401 sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), ECU_TXFF_LEV);
1402
1403 sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map,
1404 TX_RING_SIZE - 1);
1405
1406 err = sky2_rx_start(sky2);
1407 if (err)
1408 goto err_out;
1409
1410 /* Enable interrupts from phy/mac for port */
1411 imask = sky2_read32(hw, B0_IMSK);
1412 imask |= portirq_msk[port];
1413 sky2_write32(hw, B0_IMSK, imask);
1414
1415 return 0;
1416
1417 err_out:
1418 if (sky2->rx_le) {
1419 pci_free_consistent(hw->pdev, RX_LE_BYTES,
1420 sky2->rx_le, sky2->rx_le_map);
1421 sky2->rx_le = NULL;
1422 }
1423 if (sky2->tx_le) {
1424 pci_free_consistent(hw->pdev,
1425 TX_RING_SIZE * sizeof(struct sky2_tx_le),
1426 sky2->tx_le, sky2->tx_le_map);
1427 sky2->tx_le = NULL;
1428 }
1429 kfree(sky2->tx_ring);
1430 kfree(sky2->rx_ring);
1431
1432 sky2->tx_ring = NULL;
1433 sky2->rx_ring = NULL;
1434 return err;
1435 }
1436
1437 /* Modular subtraction in ring */
1438 static inline int tx_dist(unsigned tail, unsigned head)
1439 {
1440 return (head - tail) & (TX_RING_SIZE - 1);
1441 }
1442
1443 /* Number of list elements available for next tx */
1444 static inline int tx_avail(const struct sky2_port *sky2)
1445 {
1446 return sky2->tx_pending - tx_dist(sky2->tx_cons, sky2->tx_prod);
1447 }
1448
1449 /* Estimate of number of transmit list elements required */
1450 static unsigned tx_le_req(const struct sk_buff *skb)
1451 {
1452 unsigned count;
1453
1454 count = sizeof(dma_addr_t) / sizeof(u32);
1455 count += skb_shinfo(skb)->nr_frags * count;
1456
1457 if (skb_is_gso(skb))
1458 ++count;
1459
1460 if (skb->ip_summed == CHECKSUM_PARTIAL)
1461 ++count;
1462
1463 return count;
1464 }
1465
1466 /*
1467 * Put one packet in ring for transmit.
1468 * A single packet can generate multiple list elements, and
1469 * the number of ring elements will probably be less than the number
1470 * of list elements used.
1471 */
1472 static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev)
1473 {
1474 struct sky2_port *sky2 = netdev_priv(dev);
1475 struct sky2_hw *hw = sky2->hw;
1476 struct sky2_tx_le *le = NULL;
1477 struct tx_ring_info *re;
1478 unsigned i, len;
1479 dma_addr_t mapping;
1480 u16 mss;
1481 u8 ctrl;
1482
1483 if (unlikely(tx_avail(sky2) < tx_le_req(skb)))
1484 return NETDEV_TX_BUSY;
1485
1486 if (unlikely(netif_msg_tx_queued(sky2)))
1487 printk(KERN_DEBUG "%s: tx queued, slot %u, len %d\n",
1488 dev->name, sky2->tx_prod, skb->len);
1489
1490 len = skb_headlen(skb);
1491 mapping = pci_map_single(hw->pdev, skb->data, len, PCI_DMA_TODEVICE);
1492
1493 /* Send high bits if needed */
1494 if (sizeof(dma_addr_t) > sizeof(u32)) {
1495 le = get_tx_le(sky2);
1496 le->addr = cpu_to_le32(upper_32_bits(mapping));
1497 le->opcode = OP_ADDR64 | HW_OWNER;
1498 }
1499
1500 /* Check for TCP Segmentation Offload */
1501 mss = skb_shinfo(skb)->gso_size;
1502 if (mss != 0) {
1503
1504 if (!(hw->flags & SKY2_HW_NEW_LE))
1505 mss += ETH_HLEN + ip_hdrlen(skb) + tcp_hdrlen(skb);
1506
1507 if (mss != sky2->tx_last_mss) {
1508 le = get_tx_le(sky2);
1509 le->addr = cpu_to_le32(mss);
1510
1511 if (hw->flags & SKY2_HW_NEW_LE)
1512 le->opcode = OP_MSS | HW_OWNER;
1513 else
1514 le->opcode = OP_LRGLEN | HW_OWNER;
1515 sky2->tx_last_mss = mss;
1516 }
1517 }
1518
1519 ctrl = 0;
1520 #ifdef SKY2_VLAN_TAG_USED
1521 /* Add VLAN tag, can piggyback on LRGLEN or ADDR64 */
1522 if (sky2->vlgrp && vlan_tx_tag_present(skb)) {
1523 if (!le) {
1524 le = get_tx_le(sky2);
1525 le->addr = 0;
1526 le->opcode = OP_VLAN|HW_OWNER;
1527 } else
1528 le->opcode |= OP_VLAN;
1529 le->length = cpu_to_be16(vlan_tx_tag_get(skb));
1530 ctrl |= INS_VLAN;
1531 }
1532 #endif
1533
1534 /* Handle TCP checksum offload */
1535 if (skb->ip_summed == CHECKSUM_PARTIAL) {
1536 /* On Yukon EX (some versions) encoding change. */
1537 if (hw->flags & SKY2_HW_AUTO_TX_SUM)
1538 ctrl |= CALSUM; /* auto checksum */
1539 else {
1540 const unsigned offset = skb_transport_offset(skb);
1541 u32 tcpsum;
1542
1543 tcpsum = offset << 16; /* sum start */
1544 tcpsum |= offset + skb->csum_offset; /* sum write */
1545
1546 ctrl |= CALSUM | WR_SUM | INIT_SUM | LOCK_SUM;
1547 if (ip_hdr(skb)->protocol == IPPROTO_UDP)
1548 ctrl |= UDPTCP;
1549
1550 if (tcpsum != sky2->tx_tcpsum) {
1551 sky2->tx_tcpsum = tcpsum;
1552
1553 le = get_tx_le(sky2);
1554 le->addr = cpu_to_le32(tcpsum);
1555 le->length = 0; /* initial checksum value */
1556 le->ctrl = 1; /* one packet */
1557 le->opcode = OP_TCPLISW | HW_OWNER;
1558 }
1559 }
1560 }
1561
1562 le = get_tx_le(sky2);
1563 le->addr = cpu_to_le32((u32) mapping);
1564 le->length = cpu_to_le16(len);
1565 le->ctrl = ctrl;
1566 le->opcode = mss ? (OP_LARGESEND | HW_OWNER) : (OP_PACKET | HW_OWNER);
1567
1568 re = tx_le_re(sky2, le);
1569 re->skb = skb;
1570 pci_unmap_addr_set(re, mapaddr, mapping);
1571 pci_unmap_len_set(re, maplen, len);
1572
1573 for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
1574 const skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
1575
1576 mapping = pci_map_page(hw->pdev, frag->page, frag->page_offset,
1577 frag->size, PCI_DMA_TODEVICE);
1578
1579 if (sizeof(dma_addr_t) > sizeof(u32)) {
1580 le = get_tx_le(sky2);
1581 le->addr = cpu_to_le32(upper_32_bits(mapping));
1582 le->ctrl = 0;
1583 le->opcode = OP_ADDR64 | HW_OWNER;
1584 }
1585
1586 le = get_tx_le(sky2);
1587 le->addr = cpu_to_le32((u32) mapping);
1588 le->length = cpu_to_le16(frag->size);
1589 le->ctrl = ctrl;
1590 le->opcode = OP_BUFFER | HW_OWNER;
1591
1592 re = tx_le_re(sky2, le);
1593 re->skb = skb;
1594 pci_unmap_addr_set(re, mapaddr, mapping);
1595 pci_unmap_len_set(re, maplen, frag->size);
1596 }
1597
1598 le->ctrl |= EOP;
1599
1600 if (tx_avail(sky2) <= MAX_SKB_TX_LE)
1601 netif_stop_queue(dev);
1602
1603 sky2_put_idx(hw, txqaddr[sky2->port], sky2->tx_prod);
1604
1605 dev->trans_start = jiffies;
1606 return NETDEV_TX_OK;
1607 }
1608
1609 /*
1610 * Free ring elements from starting at tx_cons until "done"
1611 *
1612 * NB: the hardware will tell us about partial completion of multi-part
1613 * buffers so make sure not to free skb to early.
1614 */
1615 static void sky2_tx_complete(struct sky2_port *sky2, u16 done)
1616 {
1617 struct net_device *dev = sky2->netdev;
1618 struct pci_dev *pdev = sky2->hw->pdev;
1619 unsigned idx;
1620
1621 BUG_ON(done >= TX_RING_SIZE);
1622
1623 for (idx = sky2->tx_cons; idx != done;
1624 idx = RING_NEXT(idx, TX_RING_SIZE)) {
1625 struct sky2_tx_le *le = sky2->tx_le + idx;
1626 struct tx_ring_info *re = sky2->tx_ring + idx;
1627
1628 switch(le->opcode & ~HW_OWNER) {
1629 case OP_LARGESEND:
1630 case OP_PACKET:
1631 pci_unmap_single(pdev,
1632 pci_unmap_addr(re, mapaddr),
1633 pci_unmap_len(re, maplen),
1634 PCI_DMA_TODEVICE);
1635 break;
1636 case OP_BUFFER:
1637 pci_unmap_page(pdev, pci_unmap_addr(re, mapaddr),
1638 pci_unmap_len(re, maplen),
1639 PCI_DMA_TODEVICE);
1640 break;
1641 }
1642
1643 if (le->ctrl & EOP) {
1644 if (unlikely(netif_msg_tx_done(sky2)))
1645 printk(KERN_DEBUG "%s: tx done %u\n",
1646 dev->name, idx);
1647
1648 dev->stats.tx_packets++;
1649 dev->stats.tx_bytes += re->skb->len;
1650
1651 dev_kfree_skb_any(re->skb);
1652 sky2->tx_next = RING_NEXT(idx, TX_RING_SIZE);
1653 }
1654 }
1655
1656 sky2->tx_cons = idx;
1657 smp_mb();
1658
1659 if (tx_avail(sky2) > MAX_SKB_TX_LE + 4)
1660 netif_wake_queue(dev);
1661 }
1662
1663 /* Cleanup all untransmitted buffers, assume transmitter not running */
1664 static void sky2_tx_clean(struct net_device *dev)
1665 {
1666 struct sky2_port *sky2 = netdev_priv(dev);
1667
1668 netif_tx_lock_bh(dev);
1669 sky2_tx_complete(sky2, sky2->tx_prod);
1670 netif_tx_unlock_bh(dev);
1671 }
1672
1673 /* Network shutdown */
1674 static int sky2_down(struct net_device *dev)
1675 {
1676 struct sky2_port *sky2 = netdev_priv(dev);
1677 struct sky2_hw *hw = sky2->hw;
1678 unsigned port = sky2->port;
1679 u16 ctrl;
1680 u32 imask;
1681
1682 /* Never really got started! */
1683 if (!sky2->tx_le)
1684 return 0;
1685
1686 if (netif_msg_ifdown(sky2))
1687 printk(KERN_INFO PFX "%s: disabling interface\n", dev->name);
1688
1689 /* Stop more packets from being queued */
1690 netif_stop_queue(dev);
1691
1692 /* Disable port IRQ */
1693 imask = sky2_read32(hw, B0_IMSK);
1694 imask &= ~portirq_msk[port];
1695 sky2_write32(hw, B0_IMSK, imask);
1696
1697 synchronize_irq(hw->pdev->irq);
1698
1699 sky2_gmac_reset(hw, port);
1700
1701 /* Stop transmitter */
1702 sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_STOP);
1703 sky2_read32(hw, Q_ADDR(txqaddr[port], Q_CSR));
1704
1705 sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL),
1706 RB_RST_SET | RB_DIS_OP_MD);
1707
1708 ctrl = gma_read16(hw, port, GM_GP_CTRL);
1709 ctrl &= ~(GM_GPCR_TX_ENA | GM_GPCR_RX_ENA);
1710 gma_write16(hw, port, GM_GP_CTRL, ctrl);
1711
1712 /* Make sure no packets are pending */
1713 napi_synchronize(&hw->napi);
1714
1715 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET);
1716
1717 /* Workaround shared GMAC reset */
1718 if (!(hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0
1719 && port == 0 && hw->dev[1] && netif_running(hw->dev[1])))
1720 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_SET);
1721
1722 /* Disable Force Sync bit and Enable Alloc bit */
1723 sky2_write8(hw, SK_REG(port, TXA_CTRL),
1724 TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC);
1725
1726 /* Stop Interval Timer and Limit Counter of Tx Arbiter */
1727 sky2_write32(hw, SK_REG(port, TXA_ITI_INI), 0L);
1728 sky2_write32(hw, SK_REG(port, TXA_LIM_INI), 0L);
1729
1730 /* Reset the PCI FIFO of the async Tx queue */
1731 sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR),
1732 BMU_RST_SET | BMU_FIFO_RST);
1733
1734 /* Reset the Tx prefetch units */
1735 sky2_write32(hw, Y2_QADDR(txqaddr[port], PREF_UNIT_CTRL),
1736 PREF_UNIT_RST_SET);
1737
1738 sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), RB_RST_SET);
1739
1740 sky2_rx_stop(sky2);
1741
1742 sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
1743 sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET);
1744
1745 sky2_phy_power(hw, port, 0);
1746
1747 netif_carrier_off(dev);
1748
1749 /* turn off LED's */
1750 sky2_write16(hw, B0_Y2LED, LED_STAT_OFF);
1751
1752 sky2_tx_clean(dev);
1753 sky2_rx_clean(sky2);
1754
1755 pci_free_consistent(hw->pdev, RX_LE_BYTES,
1756 sky2->rx_le, sky2->rx_le_map);
1757 kfree(sky2->rx_ring);
1758
1759 pci_free_consistent(hw->pdev,
1760 TX_RING_SIZE * sizeof(struct sky2_tx_le),
1761 sky2->tx_le, sky2->tx_le_map);
1762 kfree(sky2->tx_ring);
1763
1764 sky2->tx_le = NULL;
1765 sky2->rx_le = NULL;
1766
1767 sky2->rx_ring = NULL;
1768 sky2->tx_ring = NULL;
1769
1770 return 0;
1771 }
1772
1773 static u16 sky2_phy_speed(const struct sky2_hw *hw, u16 aux)
1774 {
1775 if (hw->flags & SKY2_HW_FIBRE_PHY)
1776 return SPEED_1000;
1777
1778 if (!(hw->flags & SKY2_HW_GIGABIT)) {
1779 if (aux & PHY_M_PS_SPEED_100)
1780 return SPEED_100;
1781 else
1782 return SPEED_10;
1783 }
1784
1785 switch (aux & PHY_M_PS_SPEED_MSK) {
1786 case PHY_M_PS_SPEED_1000:
1787 return SPEED_1000;
1788 case PHY_M_PS_SPEED_100:
1789 return SPEED_100;
1790 default:
1791 return SPEED_10;
1792 }
1793 }
1794
1795 static void sky2_link_up(struct sky2_port *sky2)
1796 {
1797 struct sky2_hw *hw = sky2->hw;
1798 unsigned port = sky2->port;
1799 u16 reg;
1800 static const char *fc_name[] = {
1801 [FC_NONE] = "none",
1802 [FC_TX] = "tx",
1803 [FC_RX] = "rx",
1804 [FC_BOTH] = "both",
1805 };
1806
1807 /* enable Rx/Tx */
1808 reg = gma_read16(hw, port, GM_GP_CTRL);
1809 reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA;
1810 gma_write16(hw, port, GM_GP_CTRL, reg);
1811
1812 gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
1813
1814 netif_carrier_on(sky2->netdev);
1815
1816 mod_timer(&hw->watchdog_timer, jiffies + 1);
1817
1818 /* Turn on link LED */
1819 sky2_write8(hw, SK_REG(port, LNK_LED_REG),
1820 LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF);
1821
1822 if (netif_msg_link(sky2))
1823 printk(KERN_INFO PFX
1824 "%s: Link is up at %d Mbps, %s duplex, flow control %s\n",
1825 sky2->netdev->name, sky2->speed,
1826 sky2->duplex == DUPLEX_FULL ? "full" : "half",
1827 fc_name[sky2->flow_status]);
1828 }
1829
1830 static void sky2_link_down(struct sky2_port *sky2)
1831 {
1832 struct sky2_hw *hw = sky2->hw;
1833 unsigned port = sky2->port;
1834 u16 reg;
1835
1836 gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0);
1837
1838 reg = gma_read16(hw, port, GM_GP_CTRL);
1839 reg &= ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA);
1840 gma_write16(hw, port, GM_GP_CTRL, reg);
1841
1842 netif_carrier_off(sky2->netdev);
1843
1844 /* Turn on link LED */
1845 sky2_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF);
1846
1847 if (netif_msg_link(sky2))
1848 printk(KERN_INFO PFX "%s: Link is down.\n", sky2->netdev->name);
1849
1850 sky2_phy_init(hw, port);
1851 }
1852
1853 static enum flow_control sky2_flow(int rx, int tx)
1854 {
1855 if (rx)
1856 return tx ? FC_BOTH : FC_RX;
1857 else
1858 return tx ? FC_TX : FC_NONE;
1859 }
1860
1861 static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux)
1862 {
1863 struct sky2_hw *hw = sky2->hw;
1864 unsigned port = sky2->port;
1865 u16 advert, lpa;
1866
1867 advert = gm_phy_read(hw, port, PHY_MARV_AUNE_ADV);
1868 lpa = gm_phy_read(hw, port, PHY_MARV_AUNE_LP);
1869 if (lpa & PHY_M_AN_RF) {
1870 printk(KERN_ERR PFX "%s: remote fault", sky2->netdev->name);
1871 return -1;
1872 }
1873
1874 if (!(aux & PHY_M_PS_SPDUP_RES)) {
1875 printk(KERN_ERR PFX "%s: speed/duplex mismatch",
1876 sky2->netdev->name);
1877 return -1;
1878 }
1879
1880 sky2->speed = sky2_phy_speed(hw, aux);
1881 sky2->duplex = (aux & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF;
1882
1883 /* Since the pause result bits seem to in different positions on
1884 * different chips. look at registers.
1885 */
1886 if (hw->flags & SKY2_HW_FIBRE_PHY) {
1887 /* Shift for bits in fiber PHY */
1888 advert &= ~(ADVERTISE_PAUSE_CAP|ADVERTISE_PAUSE_ASYM);
1889 lpa &= ~(LPA_PAUSE_CAP|LPA_PAUSE_ASYM);
1890
1891 if (advert & ADVERTISE_1000XPAUSE)
1892 advert |= ADVERTISE_PAUSE_CAP;
1893 if (advert & ADVERTISE_1000XPSE_ASYM)
1894 advert |= ADVERTISE_PAUSE_ASYM;
1895 if (lpa & LPA_1000XPAUSE)
1896 lpa |= LPA_PAUSE_CAP;
1897 if (lpa & LPA_1000XPAUSE_ASYM)
1898 lpa |= LPA_PAUSE_ASYM;
1899 }
1900
1901 sky2->flow_status = FC_NONE;
1902 if (advert & ADVERTISE_PAUSE_CAP) {
1903 if (lpa & LPA_PAUSE_CAP)
1904 sky2->flow_status = FC_BOTH;
1905 else if (advert & ADVERTISE_PAUSE_ASYM)
1906 sky2->flow_status = FC_RX;
1907 } else if (advert & ADVERTISE_PAUSE_ASYM) {
1908 if ((lpa & LPA_PAUSE_CAP) && (lpa & LPA_PAUSE_ASYM))
1909 sky2->flow_status = FC_TX;
1910 }
1911
1912 if (sky2->duplex == DUPLEX_HALF && sky2->speed < SPEED_1000
1913 && !(hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX))
1914 sky2->flow_status = FC_NONE;
1915
1916 if (sky2->flow_status & FC_TX)
1917 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON);
1918 else
1919 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
1920
1921 return 0;
1922 }
1923
1924 /* Interrupt from PHY */
1925 static void sky2_phy_intr(struct sky2_hw *hw, unsigned port)
1926 {
1927 struct net_device *dev = hw->dev[port];
1928 struct sky2_port *sky2 = netdev_priv(dev);
1929 u16 istatus, phystat;
1930
1931 if (!netif_running(dev))
1932 return;
1933
1934 spin_lock(&sky2->phy_lock);
1935 istatus = gm_phy_read(hw, port, PHY_MARV_INT_STAT);
1936 phystat = gm_phy_read(hw, port, PHY_MARV_PHY_STAT);
1937
1938 if (netif_msg_intr(sky2))
1939 printk(KERN_INFO PFX "%s: phy interrupt status 0x%x 0x%x\n",
1940 sky2->netdev->name, istatus, phystat);
1941
1942 if (sky2->autoneg == AUTONEG_ENABLE && (istatus & PHY_M_IS_AN_COMPL)) {
1943 if (sky2_autoneg_done(sky2, phystat) == 0)
1944 sky2_link_up(sky2);
1945 goto out;
1946 }
1947
1948 if (istatus & PHY_M_IS_LSP_CHANGE)
1949 sky2->speed = sky2_phy_speed(hw, phystat);
1950
1951 if (istatus & PHY_M_IS_DUP_CHANGE)
1952 sky2->duplex =
1953 (phystat & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF;
1954
1955 if (istatus & PHY_M_IS_LST_CHANGE) {
1956 if (phystat & PHY_M_PS_LINK_UP)
1957 sky2_link_up(sky2);
1958 else
1959 sky2_link_down(sky2);
1960 }
1961 out:
1962 spin_unlock(&sky2->phy_lock);
1963 }
1964
1965 /* Transmit timeout is only called if we are running, carrier is up
1966 * and tx queue is full (stopped).
1967 */
1968 static void sky2_tx_timeout(struct net_device *dev)
1969 {
1970 struct sky2_port *sky2 = netdev_priv(dev);
1971 struct sky2_hw *hw = sky2->hw;
1972
1973 if (netif_msg_timer(sky2))
1974 printk(KERN_ERR PFX "%s: tx timeout\n", dev->name);
1975
1976 printk(KERN_DEBUG PFX "%s: transmit ring %u .. %u report=%u done=%u\n",
1977 dev->name, sky2->tx_cons, sky2->tx_prod,
1978 sky2_read16(hw, sky2->port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX),
1979 sky2_read16(hw, Q_ADDR(txqaddr[sky2->port], Q_DONE)));
1980
1981 /* can't restart safely under softirq */
1982 schedule_work(&hw->restart_work);
1983 }
1984
1985 static int sky2_change_mtu(struct net_device *dev, int new_mtu)
1986 {
1987 struct sky2_port *sky2 = netdev_priv(dev);
1988 struct sky2_hw *hw = sky2->hw;
1989 unsigned port = sky2->port;
1990 int err;
1991 u16 ctl, mode;
1992 u32 imask;
1993
1994 if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU)
1995 return -EINVAL;
1996
1997 if (new_mtu > ETH_DATA_LEN &&
1998 (hw->chip_id == CHIP_ID_YUKON_FE ||
1999 hw->chip_id == CHIP_ID_YUKON_FE_P))
2000 return -EINVAL;
2001
2002 if (!netif_running(dev)) {
2003 dev->mtu = new_mtu;
2004 return 0;
2005 }
2006
2007 imask = sky2_read32(hw, B0_IMSK);
2008 sky2_write32(hw, B0_IMSK, 0);
2009
2010 dev->trans_start = jiffies; /* prevent tx timeout */
2011 netif_stop_queue(dev);
2012 napi_disable(&hw->napi);
2013
2014 synchronize_irq(hw->pdev->irq);
2015
2016 if (sky2_read8(hw, B2_E_0) == 0)
2017 sky2_set_tx_stfwd(hw, port);
2018
2019 ctl = gma_read16(hw, port, GM_GP_CTRL);
2020 gma_write16(hw, port, GM_GP_CTRL, ctl & ~GM_GPCR_RX_ENA);
2021 sky2_rx_stop(sky2);
2022 sky2_rx_clean(sky2);
2023
2024 dev->mtu = new_mtu;
2025
2026 mode = DATA_BLIND_VAL(DATA_BLIND_DEF) |
2027 GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF);
2028
2029 if (dev->mtu > ETH_DATA_LEN)
2030 mode |= GM_SMOD_JUMBO_ENA;
2031
2032 gma_write16(hw, port, GM_SERIAL_MODE, mode);
2033
2034 sky2_write8(hw, RB_ADDR(rxqaddr[port], RB_CTRL), RB_ENA_OP_MD);
2035
2036 err = sky2_rx_start(sky2);
2037 sky2_write32(hw, B0_IMSK, imask);
2038
2039 sky2_read32(hw, B0_Y2_SP_LISR);
2040 napi_enable(&hw->napi);
2041
2042 if (err)
2043 dev_close(dev);
2044 else {
2045 gma_write16(hw, port, GM_GP_CTRL, ctl);
2046
2047 netif_wake_queue(dev);
2048 }
2049
2050 return err;
2051 }
2052
2053 /* For small just reuse existing skb for next receive */
2054 static struct sk_buff *receive_copy(struct sky2_port *sky2,
2055 const struct rx_ring_info *re,
2056 unsigned length)
2057 {
2058 struct sk_buff *skb;
2059
2060 skb = netdev_alloc_skb(sky2->netdev, length + 2);
2061 if (likely(skb)) {
2062 skb_reserve(skb, 2);
2063 pci_dma_sync_single_for_cpu(sky2->hw->pdev, re->data_addr,
2064 length, PCI_DMA_FROMDEVICE);
2065 skb_copy_from_linear_data(re->skb, skb->data, length);
2066 skb->ip_summed = re->skb->ip_summed;
2067 skb->csum = re->skb->csum;
2068 pci_dma_sync_single_for_device(sky2->hw->pdev, re->data_addr,
2069 length, PCI_DMA_FROMDEVICE);
2070 re->skb->ip_summed = CHECKSUM_NONE;
2071 skb_put(skb, length);
2072 }
2073 return skb;
2074 }
2075
2076 /* Adjust length of skb with fragments to match received data */
2077 static void skb_put_frags(struct sk_buff *skb, unsigned int hdr_space,
2078 unsigned int length)
2079 {
2080 int i, num_frags;
2081 unsigned int size;
2082
2083 /* put header into skb */
2084 size = min(length, hdr_space);
2085 skb->tail += size;
2086 skb->len += size;
2087 length -= size;
2088
2089 num_frags = skb_shinfo(skb)->nr_frags;
2090 for (i = 0; i < num_frags; i++) {
2091 skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
2092
2093 if (length == 0) {
2094 /* don't need this page */
2095 __free_page(frag->page);
2096 --skb_shinfo(skb)->nr_frags;
2097 } else {
2098 size = min(length, (unsigned) PAGE_SIZE);
2099
2100 frag->size = size;
2101 skb->data_len += size;
2102 skb->truesize += size;
2103 skb->len += size;
2104 length -= size;
2105 }
2106 }
2107 }
2108
2109 /* Normal packet - take skb from ring element and put in a new one */
2110 static struct sk_buff *receive_new(struct sky2_port *sky2,
2111 struct rx_ring_info *re,
2112 unsigned int length)
2113 {
2114 struct sk_buff *skb, *nskb;
2115 unsigned hdr_space = sky2->rx_data_size;
2116
2117 /* Don't be tricky about reusing pages (yet) */
2118 nskb = sky2_rx_alloc(sky2);
2119 if (unlikely(!nskb))
2120 return NULL;
2121
2122 skb = re->skb;
2123 sky2_rx_unmap_skb(sky2->hw->pdev, re);
2124
2125 prefetch(skb->data);
2126 re->skb = nskb;
2127 sky2_rx_map_skb(sky2->hw->pdev, re, hdr_space);
2128
2129 if (skb_shinfo(skb)->nr_frags)
2130 skb_put_frags(skb, hdr_space, length);
2131 else
2132 skb_put(skb, length);
2133 return skb;
2134 }
2135
2136 /*
2137 * Receive one packet.
2138 * For larger packets, get new buffer.
2139 */
2140 static struct sk_buff *sky2_receive(struct net_device *dev,
2141 u16 length, u32 status)
2142 {
2143 struct sky2_port *sky2 = netdev_priv(dev);
2144 struct rx_ring_info *re = sky2->rx_ring + sky2->rx_next;
2145 struct sk_buff *skb = NULL;
2146 u16 count = (status & GMR_FS_LEN) >> 16;
2147
2148 #ifdef SKY2_VLAN_TAG_USED
2149 /* Account for vlan tag */
2150 if (sky2->vlgrp && (status & GMR_FS_VLAN))
2151 count -= VLAN_HLEN;
2152 #endif
2153
2154 if (unlikely(netif_msg_rx_status(sky2)))
2155 printk(KERN_DEBUG PFX "%s: rx slot %u status 0x%x len %d\n",
2156 dev->name, sky2->rx_next, status, length);
2157
2158 sky2->rx_next = (sky2->rx_next + 1) % sky2->rx_pending;
2159 prefetch(sky2->rx_ring + sky2->rx_next);
2160
2161 /* This chip has hardware problems that generates bogus status.
2162 * So do only marginal checking and expect higher level protocols
2163 * to handle crap frames.
2164 */
2165 if (sky2->hw->chip_id == CHIP_ID_YUKON_FE_P &&
2166 sky2->hw->chip_rev == CHIP_REV_YU_FE2_A0 &&
2167 length != count)
2168 goto okay;
2169
2170 if (status & GMR_FS_ANY_ERR)
2171 goto error;
2172
2173 if (!(status & GMR_FS_RX_OK))
2174 goto resubmit;
2175
2176 /* if length reported by DMA does not match PHY, packet was truncated */
2177 if (length != count)
2178 goto len_error;
2179
2180 okay:
2181 if (length < copybreak)
2182 skb = receive_copy(sky2, re, length);
2183 else
2184 skb = receive_new(sky2, re, length);
2185 resubmit:
2186 sky2_rx_submit(sky2, re);
2187
2188 return skb;
2189
2190 len_error:
2191 /* Truncation of overlength packets
2192 causes PHY length to not match MAC length */
2193 ++dev->stats.rx_length_errors;
2194 if (netif_msg_rx_err(sky2) && net_ratelimit())
2195 pr_info(PFX "%s: rx length error: status %#x length %d\n",
2196 dev->name, status, length);
2197 goto resubmit;
2198
2199 error:
2200 ++dev->stats.rx_errors;
2201 if (status & GMR_FS_RX_FF_OV) {
2202 dev->stats.rx_over_errors++;
2203 goto resubmit;
2204 }
2205
2206 if (netif_msg_rx_err(sky2) && net_ratelimit())
2207 printk(KERN_INFO PFX "%s: rx error, status 0x%x length %d\n",
2208 dev->name, status, length);
2209
2210 if (status & (GMR_FS_LONG_ERR | GMR_FS_UN_SIZE))
2211 dev->stats.rx_length_errors++;
2212 if (status & GMR_FS_FRAGMENT)
2213 dev->stats.rx_frame_errors++;
2214 if (status & GMR_FS_CRC_ERR)
2215 dev->stats.rx_crc_errors++;
2216
2217 goto resubmit;
2218 }
2219
2220 /* Transmit complete */
2221 static inline void sky2_tx_done(struct net_device *dev, u16 last)
2222 {
2223 struct sky2_port *sky2 = netdev_priv(dev);
2224
2225 if (netif_running(dev)) {
2226 netif_tx_lock(dev);
2227 sky2_tx_complete(sky2, last);
2228 netif_tx_unlock(dev);
2229 }
2230 }
2231
2232 /* Process status response ring */
2233 static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx)
2234 {
2235 int work_done = 0;
2236 unsigned rx[2] = { 0, 0 };
2237
2238 rmb();
2239 do {
2240 struct sky2_port *sky2;
2241 struct sky2_status_le *le = hw->st_le + hw->st_idx;
2242 unsigned port;
2243 struct net_device *dev;
2244 struct sk_buff *skb;
2245 u32 status;
2246 u16 length;
2247 u8 opcode = le->opcode;
2248
2249 if (!(opcode & HW_OWNER))
2250 break;
2251
2252 hw->st_idx = RING_NEXT(hw->st_idx, STATUS_RING_SIZE);
2253
2254 port = le->css & CSS_LINK_BIT;
2255 dev = hw->dev[port];
2256 sky2 = netdev_priv(dev);
2257 length = le16_to_cpu(le->length);
2258 status = le32_to_cpu(le->status);
2259
2260 le->opcode = 0;
2261 switch (opcode & ~HW_OWNER) {
2262 case OP_RXSTAT:
2263 ++rx[port];
2264 skb = sky2_receive(dev, length, status);
2265 if (unlikely(!skb)) {
2266 dev->stats.rx_dropped++;
2267 break;
2268 }
2269
2270 /* This chip reports checksum status differently */
2271 if (hw->flags & SKY2_HW_NEW_LE) {
2272 if (sky2->rx_csum &&
2273 (le->css & (CSS_ISIPV4 | CSS_ISIPV6)) &&
2274 (le->css & CSS_TCPUDPCSOK))
2275 skb->ip_summed = CHECKSUM_UNNECESSARY;
2276 else
2277 skb->ip_summed = CHECKSUM_NONE;
2278 }
2279
2280 skb->protocol = eth_type_trans(skb, dev);
2281 dev->stats.rx_packets++;
2282 dev->stats.rx_bytes += skb->len;
2283 dev->last_rx = jiffies;
2284
2285 #ifdef SKY2_VLAN_TAG_USED
2286 if (sky2->vlgrp && (status & GMR_FS_VLAN)) {
2287 vlan_hwaccel_receive_skb(skb,
2288 sky2->vlgrp,
2289 be16_to_cpu(sky2->rx_tag));
2290 } else
2291 #endif
2292 netif_receive_skb(skb);
2293
2294 /* Stop after net poll weight */
2295 if (++work_done >= to_do)
2296 goto exit_loop;
2297 break;
2298
2299 #ifdef SKY2_VLAN_TAG_USED
2300 case OP_RXVLAN:
2301 sky2->rx_tag = length;
2302 break;
2303
2304 case OP_RXCHKSVLAN:
2305 sky2->rx_tag = length;
2306 /* fall through */
2307 #endif
2308 case OP_RXCHKS:
2309 if (!sky2->rx_csum)
2310 break;
2311
2312 /* If this happens then driver assuming wrong format */
2313 if (unlikely(hw->flags & SKY2_HW_NEW_LE)) {
2314 if (net_ratelimit())
2315 printk(KERN_NOTICE "%s: unexpected"
2316 " checksum status\n",
2317 dev->name);
2318 break;
2319 }
2320
2321 /* Both checksum counters are programmed to start at
2322 * the same offset, so unless there is a problem they
2323 * should match. This failure is an early indication that
2324 * hardware receive checksumming won't work.
2325 */
2326 if (likely(status >> 16 == (status & 0xffff))) {
2327 skb = sky2->rx_ring[sky2->rx_next].skb;
2328 skb->ip_summed = CHECKSUM_COMPLETE;
2329 skb->csum = status & 0xffff;
2330 } else {
2331 printk(KERN_NOTICE PFX "%s: hardware receive "
2332 "checksum problem (status = %#x)\n",
2333 dev->name, status);
2334 sky2->rx_csum = 0;
2335 sky2_write32(sky2->hw,
2336 Q_ADDR(rxqaddr[port], Q_CSR),
2337 BMU_DIS_RX_CHKSUM);
2338 }
2339 break;
2340
2341 case OP_TXINDEXLE:
2342 /* TX index reports status for both ports */
2343 BUILD_BUG_ON(TX_RING_SIZE > 0x1000);
2344 sky2_tx_done(hw->dev[0], status & 0xfff);
2345 if (hw->dev[1])
2346 sky2_tx_done(hw->dev[1],
2347 ((status >> 24) & 0xff)
2348 | (u16)(length & 0xf) << 8);
2349 break;
2350
2351 default:
2352 if (net_ratelimit())
2353 printk(KERN_WARNING PFX
2354 "unknown status opcode 0x%x\n", opcode);
2355 }
2356 } while (hw->st_idx != idx);
2357
2358 /* Fully processed status ring so clear irq */
2359 sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
2360
2361 exit_loop:
2362 if (rx[0])
2363 sky2_rx_update(netdev_priv(hw->dev[0]), Q_R1);
2364
2365 if (rx[1])
2366 sky2_rx_update(netdev_priv(hw->dev[1]), Q_R2);
2367
2368 return work_done;
2369 }
2370
2371 static void sky2_hw_error(struct sky2_hw *hw, unsigned port, u32 status)
2372 {
2373 struct net_device *dev = hw->dev[port];
2374
2375 if (net_ratelimit())
2376 printk(KERN_INFO PFX "%s: hw error interrupt status 0x%x\n",
2377 dev->name, status);
2378
2379 if (status & Y2_IS_PAR_RD1) {
2380 if (net_ratelimit())
2381 printk(KERN_ERR PFX "%s: ram data read parity error\n",
2382 dev->name);
2383 /* Clear IRQ */
2384 sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_RD_PERR);
2385 }
2386
2387 if (status & Y2_IS_PAR_WR1) {
2388 if (net_ratelimit())
2389 printk(KERN_ERR PFX "%s: ram data write parity error\n",
2390 dev->name);
2391
2392 sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_WR_PERR);
2393 }
2394
2395 if (status & Y2_IS_PAR_MAC1) {
2396 if (net_ratelimit())
2397 printk(KERN_ERR PFX "%s: MAC parity error\n", dev->name);
2398 sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_PE);
2399 }
2400
2401 if (status & Y2_IS_PAR_RX1) {
2402 if (net_ratelimit())
2403 printk(KERN_ERR PFX "%s: RX parity error\n", dev->name);
2404 sky2_write32(hw, Q_ADDR(rxqaddr[port], Q_CSR), BMU_CLR_IRQ_PAR);
2405 }
2406
2407 if (status & Y2_IS_TCP_TXA1) {
2408 if (net_ratelimit())
2409 printk(KERN_ERR PFX "%s: TCP segmentation error\n",
2410 dev->name);
2411 sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_CLR_IRQ_TCP);
2412 }
2413 }
2414
2415 static void sky2_hw_intr(struct sky2_hw *hw)
2416 {
2417 struct pci_dev *pdev = hw->pdev;
2418 u32 status = sky2_read32(hw, B0_HWE_ISRC);
2419 u32 hwmsk = sky2_read32(hw, B0_HWE_IMSK);
2420
2421 status &= hwmsk;
2422
2423 if (status & Y2_IS_TIST_OV)
2424 sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ);
2425
2426 if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) {
2427 u16 pci_err;
2428
2429 pci_err = sky2_pci_read16(hw, PCI_STATUS);
2430 if (net_ratelimit())
2431 dev_err(&pdev->dev, "PCI hardware error (0x%x)\n",
2432 pci_err);
2433
2434 sky2_pci_write16(hw, PCI_STATUS,
2435 pci_err | PCI_STATUS_ERROR_BITS);
2436 }
2437
2438 if (status & Y2_IS_PCI_EXP) {
2439 /* PCI-Express uncorrectable Error occurred */
2440 u32 err;
2441
2442 err = sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
2443 sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
2444 0xfffffffful);
2445 if (net_ratelimit())
2446 dev_err(&pdev->dev, "PCI Express error (0x%x)\n", err);
2447
2448 sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
2449 }
2450
2451 if (status & Y2_HWE_L1_MASK)
2452 sky2_hw_error(hw, 0, status);
2453 status >>= 8;
2454 if (status & Y2_HWE_L1_MASK)
2455 sky2_hw_error(hw, 1, status);
2456 }
2457
2458 static void sky2_mac_intr(struct sky2_hw *hw, unsigned port)
2459 {
2460 struct net_device *dev = hw->dev[port];
2461 struct sky2_port *sky2 = netdev_priv(dev);
2462 u8 status = sky2_read8(hw, SK_REG(port, GMAC_IRQ_SRC));
2463
2464 if (netif_msg_intr(sky2))
2465 printk(KERN_INFO PFX "%s: mac interrupt status 0x%x\n",
2466 dev->name, status);
2467
2468 if (status & GM_IS_RX_CO_OV)
2469 gma_read16(hw, port, GM_RX_IRQ_SRC);
2470
2471 if (status & GM_IS_TX_CO_OV)
2472 gma_read16(hw, port, GM_TX_IRQ_SRC);
2473
2474 if (status & GM_IS_RX_FF_OR) {
2475 ++dev->stats.rx_fifo_errors;
2476 sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_CLI_RX_FO);
2477 }
2478
2479 if (status & GM_IS_TX_FF_UR) {
2480 ++dev->stats.tx_fifo_errors;
2481 sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_FU);
2482 }
2483 }
2484
2485 /* This should never happen it is a bug. */
2486 static void sky2_le_error(struct sky2_hw *hw, unsigned port,
2487 u16 q, unsigned ring_size)
2488 {
2489 struct net_device *dev = hw->dev[port];
2490 struct sky2_port *sky2 = netdev_priv(dev);
2491 unsigned idx;
2492 const u64 *le = (q == Q_R1 || q == Q_R2)
2493 ? (u64 *) sky2->rx_le : (u64 *) sky2->tx_le;
2494
2495 idx = sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_GET_IDX));
2496 printk(KERN_ERR PFX "%s: descriptor error q=%#x get=%u [%llx] put=%u\n",
2497 dev->name, (unsigned) q, idx, (unsigned long long) le[idx],
2498 (unsigned) sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX)));
2499
2500 sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_CLR_IRQ_CHK);
2501 }
2502
2503 static int sky2_rx_hung(struct net_device *dev)
2504 {
2505 struct sky2_port *sky2 = netdev_priv(dev);
2506 struct sky2_hw *hw = sky2->hw;
2507 unsigned port = sky2->port;
2508 unsigned rxq = rxqaddr[port];
2509 u32 mac_rp = sky2_read32(hw, SK_REG(port, RX_GMF_RP));
2510 u8 mac_lev = sky2_read8(hw, SK_REG(port, RX_GMF_RLEV));
2511 u8 fifo_rp = sky2_read8(hw, Q_ADDR(rxq, Q_RP));
2512 u8 fifo_lev = sky2_read8(hw, Q_ADDR(rxq, Q_RL));
2513
2514 /* If idle and MAC or PCI is stuck */
2515 if (sky2->check.last == dev->last_rx &&
2516 ((mac_rp == sky2->check.mac_rp &&
2517 mac_lev != 0 && mac_lev >= sky2->check.mac_lev) ||
2518 /* Check if the PCI RX hang */
2519 (fifo_rp == sky2->check.fifo_rp &&
2520 fifo_lev != 0 && fifo_lev >= sky2->check.fifo_lev))) {
2521 printk(KERN_DEBUG PFX "%s: hung mac %d:%d fifo %d (%d:%d)\n",
2522 dev->name, mac_lev, mac_rp, fifo_lev, fifo_rp,
2523 sky2_read8(hw, Q_ADDR(rxq, Q_WP)));
2524 return 1;
2525 } else {
2526 sky2->check.last = dev->last_rx;
2527 sky2->check.mac_rp = mac_rp;
2528 sky2->check.mac_lev = mac_lev;
2529 sky2->check.fifo_rp = fifo_rp;
2530 sky2->check.fifo_lev = fifo_lev;
2531 return 0;
2532 }
2533 }
2534
2535 static void sky2_watchdog(unsigned long arg)
2536 {
2537 struct sky2_hw *hw = (struct sky2_hw *) arg;
2538
2539 /* Check for lost IRQ once a second */
2540 if (sky2_read32(hw, B0_ISRC)) {
2541 napi_schedule(&hw->napi);
2542 } else {
2543 int i, active = 0;
2544
2545 for (i = 0; i < hw->ports; i++) {
2546 struct net_device *dev = hw->dev[i];
2547 if (!netif_running(dev))
2548 continue;
2549 ++active;
2550
2551 /* For chips with Rx FIFO, check if stuck */
2552 if ((hw->flags & SKY2_HW_FIFO_HANG_CHECK) &&
2553 sky2_rx_hung(dev)) {
2554 pr_info(PFX "%s: receiver hang detected\n",
2555 dev->name);
2556 schedule_work(&hw->restart_work);
2557 return;
2558 }
2559 }
2560
2561 if (active == 0)
2562 return;
2563 }
2564
2565 mod_timer(&hw->watchdog_timer, round_jiffies(jiffies + HZ));
2566 }
2567
2568 /* Hardware/software error handling */
2569 static void sky2_err_intr(struct sky2_hw *hw, u32 status)
2570 {
2571 if (net_ratelimit())
2572 dev_warn(&hw->pdev->dev, "error interrupt status=%#x\n", status);
2573
2574 if (status & Y2_IS_HW_ERR)
2575 sky2_hw_intr(hw);
2576
2577 if (status & Y2_IS_IRQ_MAC1)
2578 sky2_mac_intr(hw, 0);
2579
2580 if (status & Y2_IS_IRQ_MAC2)
2581 sky2_mac_intr(hw, 1);
2582
2583 if (status & Y2_IS_CHK_RX1)
2584 sky2_le_error(hw, 0, Q_R1, RX_LE_SIZE);
2585
2586 if (status & Y2_IS_CHK_RX2)
2587 sky2_le_error(hw, 1, Q_R2, RX_LE_SIZE);
2588
2589 if (status & Y2_IS_CHK_TXA1)
2590 sky2_le_error(hw, 0, Q_XA1, TX_RING_SIZE);
2591
2592 if (status & Y2_IS_CHK_TXA2)
2593 sky2_le_error(hw, 1, Q_XA2, TX_RING_SIZE);
2594 }
2595
2596 static int sky2_poll(struct napi_struct *napi, int work_limit)
2597 {
2598 struct sky2_hw *hw = container_of(napi, struct sky2_hw, napi);
2599 u32 status = sky2_read32(hw, B0_Y2_SP_EISR);
2600 int work_done = 0;
2601 u16 idx;
2602
2603 if (unlikely(status & Y2_IS_ERROR))
2604 sky2_err_intr(hw, status);
2605
2606 if (status & Y2_IS_IRQ_PHY1)
2607 sky2_phy_intr(hw, 0);
2608
2609 if (status & Y2_IS_IRQ_PHY2)
2610 sky2_phy_intr(hw, 1);
2611
2612 while ((idx = sky2_read16(hw, STAT_PUT_IDX)) != hw->st_idx) {
2613 work_done += sky2_status_intr(hw, work_limit - work_done, idx);
2614
2615 if (work_done >= work_limit)
2616 goto done;
2617 }
2618
2619 /* Bug/Errata workaround?
2620 * Need to kick the TX irq moderation timer.
2621 */
2622 if (sky2_read8(hw, STAT_TX_TIMER_CTRL) == TIM_START) {
2623 sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
2624 sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
2625 }
2626 napi_complete(napi);
2627 sky2_read32(hw, B0_Y2_SP_LISR);
2628 done:
2629
2630 return work_done;
2631 }
2632
2633 static irqreturn_t sky2_intr(int irq, void *dev_id)
2634 {
2635 struct sky2_hw *hw = dev_id;
2636 u32 status;
2637
2638 /* Reading this mask interrupts as side effect */
2639 status = sky2_read32(hw, B0_Y2_SP_ISRC2);
2640 if (status == 0 || status == ~0)
2641 return IRQ_NONE;
2642
2643 prefetch(&hw->st_le[hw->st_idx]);
2644
2645 napi_schedule(&hw->napi);
2646
2647 return IRQ_HANDLED;
2648 }
2649
2650 #ifdef CONFIG_NET_POLL_CONTROLLER
2651 static void sky2_netpoll(struct net_device *dev)
2652 {
2653 struct sky2_port *sky2 = netdev_priv(dev);
2654
2655 napi_schedule(&sky2->hw->napi);
2656 }
2657 #endif
2658
2659 /* Chip internal frequency for clock calculations */
2660 static u32 sky2_mhz(const struct sky2_hw *hw)
2661 {
2662 switch (hw->chip_id) {
2663 case CHIP_ID_YUKON_EC:
2664 case CHIP_ID_YUKON_EC_U:
2665 case CHIP_ID_YUKON_EX:
2666 return 125;
2667
2668 case CHIP_ID_YUKON_FE:
2669 return 100;
2670
2671 case CHIP_ID_YUKON_FE_P:
2672 return 50;
2673
2674 case CHIP_ID_YUKON_XL:
2675 return 156;
2676
2677 default:
2678 BUG();
2679 }
2680 }
2681
2682 static inline u32 sky2_us2clk(const struct sky2_hw *hw, u32 us)
2683 {
2684 return sky2_mhz(hw) * us;
2685 }
2686
2687 static inline u32 sky2_clk2us(const struct sky2_hw *hw, u32 clk)
2688 {
2689 return clk / sky2_mhz(hw);
2690 }
2691
2692
2693 static int __devinit sky2_init(struct sky2_hw *hw)
2694 {
2695 u8 t8;
2696
2697 /* Enable all clocks and check for bad PCI access */
2698 sky2_pci_write32(hw, PCI_DEV_REG3, 0);
2699
2700 sky2_write8(hw, B0_CTST, CS_RST_CLR);
2701
2702 hw->chip_id = sky2_read8(hw, B2_CHIP_ID);
2703 hw->chip_rev = (sky2_read8(hw, B2_MAC_CFG) & CFG_CHIP_R_MSK) >> 4;
2704
2705 switch(hw->chip_id) {
2706 case CHIP_ID_YUKON_XL:
2707 hw->flags = SKY2_HW_GIGABIT
2708 | SKY2_HW_NEWER_PHY;
2709 if (hw->chip_rev < 3)
2710 hw->flags |= SKY2_HW_FIFO_HANG_CHECK;
2711
2712 break;
2713
2714 case CHIP_ID_YUKON_EC_U:
2715 hw->flags = SKY2_HW_GIGABIT
2716 | SKY2_HW_NEWER_PHY
2717 | SKY2_HW_ADV_POWER_CTL;
2718 break;
2719
2720 case CHIP_ID_YUKON_EX:
2721 hw->flags = SKY2_HW_GIGABIT
2722 | SKY2_HW_NEWER_PHY
2723 | SKY2_HW_NEW_LE
2724 | SKY2_HW_ADV_POWER_CTL;
2725
2726 /* New transmit checksum */
2727 if (hw->chip_rev != CHIP_REV_YU_EX_B0)
2728 hw->flags |= SKY2_HW_AUTO_TX_SUM;
2729 break;
2730
2731 case CHIP_ID_YUKON_EC:
2732 /* This rev is really old, and requires untested workarounds */
2733 if (hw->chip_rev == CHIP_REV_YU_EC_A1) {
2734 dev_err(&hw->pdev->dev, "unsupported revision Yukon-EC rev A1\n");
2735 return -EOPNOTSUPP;
2736 }
2737 hw->flags = SKY2_HW_GIGABIT | SKY2_HW_FIFO_HANG_CHECK;
2738 break;
2739
2740 case CHIP_ID_YUKON_FE:
2741 break;
2742
2743 case CHIP_ID_YUKON_FE_P:
2744 hw->flags = SKY2_HW_NEWER_PHY
2745 | SKY2_HW_NEW_LE
2746 | SKY2_HW_AUTO_TX_SUM
2747 | SKY2_HW_ADV_POWER_CTL;
2748 break;
2749 default:
2750 dev_err(&hw->pdev->dev, "unsupported chip type 0x%x\n",
2751 hw->chip_id);
2752 return -EOPNOTSUPP;
2753 }
2754
2755 hw->pmd_type = sky2_read8(hw, B2_PMD_TYP);
2756 if (hw->pmd_type == 'L' || hw->pmd_type == 'S' || hw->pmd_type == 'P')
2757 hw->flags |= SKY2_HW_FIBRE_PHY;
2758
2759
2760 hw->ports = 1;
2761 t8 = sky2_read8(hw, B2_Y2_HW_RES);
2762 if ((t8 & CFG_DUAL_MAC_MSK) == CFG_DUAL_MAC_MSK) {
2763 if (!(sky2_read8(hw, B2_Y2_CLK_GATE) & Y2_STATUS_LNK2_INAC))
2764 ++hw->ports;
2765 }
2766
2767 return 0;
2768 }
2769
2770 static void sky2_reset(struct sky2_hw *hw)
2771 {
2772 struct pci_dev *pdev = hw->pdev;
2773 u16 status;
2774 int i, cap;
2775 u32 hwe_mask = Y2_HWE_ALL_MASK;
2776
2777 /* disable ASF */
2778 if (hw->chip_id == CHIP_ID_YUKON_EX) {
2779 status = sky2_read16(hw, HCU_CCSR);
2780 status &= ~(HCU_CCSR_AHB_RST | HCU_CCSR_CPU_RST_MODE |
2781 HCU_CCSR_UC_STATE_MSK);
2782 sky2_write16(hw, HCU_CCSR, status);
2783 } else
2784 sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET);
2785 sky2_write16(hw, B0_CTST, Y2_ASF_DISABLE);
2786
2787 /* do a SW reset */
2788 sky2_write8(hw, B0_CTST, CS_RST_SET);
2789 sky2_write8(hw, B0_CTST, CS_RST_CLR);
2790
2791 /* allow writes to PCI config */
2792 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
2793
2794 /* clear PCI errors, if any */
2795 status = sky2_pci_read16(hw, PCI_STATUS);
2796 status |= PCI_STATUS_ERROR_BITS;
2797 sky2_pci_write16(hw, PCI_STATUS, status);
2798
2799 sky2_write8(hw, B0_CTST, CS_MRST_CLR);
2800
2801 cap = pci_find_capability(pdev, PCI_CAP_ID_EXP);
2802 if (cap) {
2803 sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
2804 0xfffffffful);
2805
2806 /* If error bit is stuck on ignore it */
2807 if (sky2_read32(hw, B0_HWE_ISRC) & Y2_IS_PCI_EXP)
2808 dev_info(&pdev->dev, "ignoring stuck error report bit\n");
2809 else
2810 hwe_mask |= Y2_IS_PCI_EXP;
2811 }
2812
2813 sky2_power_on(hw);
2814
2815 for (i = 0; i < hw->ports; i++) {
2816 sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET);
2817 sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_CLR);
2818
2819 if (hw->chip_id == CHIP_ID_YUKON_EX)
2820 sky2_write16(hw, SK_REG(i, GMAC_CTRL),
2821 GMC_BYP_MACSECRX_ON | GMC_BYP_MACSECTX_ON
2822 | GMC_BYP_RETR_ON);
2823 }
2824
2825 /* Clear I2C IRQ noise */
2826 sky2_write32(hw, B2_I2C_IRQ, 1);
2827
2828 /* turn off hardware timer (unused) */
2829 sky2_write8(hw, B2_TI_CTRL, TIM_STOP);
2830 sky2_write8(hw, B2_TI_CTRL, TIM_CLR_IRQ);
2831
2832 sky2_write8(hw, B0_Y2LED, LED_STAT_ON);
2833
2834 /* Turn off descriptor polling */
2835 sky2_write32(hw, B28_DPT_CTRL, DPT_STOP);
2836
2837 /* Turn off receive timestamp */
2838 sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_STOP);
2839 sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ);
2840
2841 /* enable the Tx Arbiters */
2842 for (i = 0; i < hw->ports; i++)
2843 sky2_write8(hw, SK_REG(i, TXA_CTRL), TXA_ENA_ARB);
2844
2845 /* Initialize ram interface */
2846 for (i = 0; i < hw->ports; i++) {
2847 sky2_write8(hw, RAM_BUFFER(i, B3_RI_CTRL), RI_RST_CLR);
2848
2849 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_R1), SK_RI_TO_53);
2850 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XA1), SK_RI_TO_53);
2851 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XS1), SK_RI_TO_53);
2852 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_R1), SK_RI_TO_53);
2853 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XA1), SK_RI_TO_53);
2854 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XS1), SK_RI_TO_53);
2855 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_R2), SK_RI_TO_53);
2856 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XA2), SK_RI_TO_53);
2857 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XS2), SK_RI_TO_53);
2858 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_R2), SK_RI_TO_53);
2859 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XA2), SK_RI_TO_53);
2860 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XS2), SK_RI_TO_53);
2861 }
2862
2863 sky2_write32(hw, B0_HWE_IMSK, hwe_mask);
2864
2865 for (i = 0; i < hw->ports; i++)
2866 sky2_gmac_reset(hw, i);
2867
2868 memset(hw->st_le, 0, STATUS_LE_BYTES);
2869 hw->st_idx = 0;
2870
2871 sky2_write32(hw, STAT_CTRL, SC_STAT_RST_SET);
2872 sky2_write32(hw, STAT_CTRL, SC_STAT_RST_CLR);
2873
2874 sky2_write32(hw, STAT_LIST_ADDR_LO, hw->st_dma);
2875 sky2_write32(hw, STAT_LIST_ADDR_HI, (u64) hw->st_dma >> 32);
2876
2877 /* Set the list last index */
2878 sky2_write16(hw, STAT_LAST_IDX, STATUS_RING_SIZE - 1);
2879
2880 sky2_write16(hw, STAT_TX_IDX_TH, 10);
2881 sky2_write8(hw, STAT_FIFO_WM, 16);
2882
2883 /* set Status-FIFO ISR watermark */
2884 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0)
2885 sky2_write8(hw, STAT_FIFO_ISR_WM, 4);
2886 else
2887 sky2_write8(hw, STAT_FIFO_ISR_WM, 16);
2888
2889 sky2_write32(hw, STAT_TX_TIMER_INI, sky2_us2clk(hw, 1000));
2890 sky2_write32(hw, STAT_ISR_TIMER_INI, sky2_us2clk(hw, 20));
2891 sky2_write32(hw, STAT_LEV_TIMER_INI, sky2_us2clk(hw, 100));
2892
2893 /* enable status unit */
2894 sky2_write32(hw, STAT_CTRL, SC_STAT_OP_ON);
2895
2896 sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
2897 sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START);
2898 sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START);
2899 }
2900
2901 static void sky2_restart(struct work_struct *work)
2902 {
2903 struct sky2_hw *hw = container_of(work, struct sky2_hw, restart_work);
2904 struct net_device *dev;
2905 int i, err;
2906
2907 rtnl_lock();
2908 for (i = 0; i < hw->ports; i++) {
2909 dev = hw->dev[i];
2910 if (netif_running(dev))
2911 sky2_down(dev);
2912 }
2913
2914 napi_disable(&hw->napi);
2915 sky2_write32(hw, B0_IMSK, 0);
2916 sky2_reset(hw);
2917 sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
2918 napi_enable(&hw->napi);
2919
2920 for (i = 0; i < hw->ports; i++) {
2921 dev = hw->dev[i];
2922 if (netif_running(dev)) {
2923 err = sky2_up(dev);
2924 if (err) {
2925 printk(KERN_INFO PFX "%s: could not restart %d\n",
2926 dev->name, err);
2927 dev_close(dev);
2928 }
2929 }
2930 }
2931
2932 rtnl_unlock();
2933 }
2934
2935 static inline u8 sky2_wol_supported(const struct sky2_hw *hw)
2936 {
2937 return sky2_is_copper(hw) ? (WAKE_PHY | WAKE_MAGIC) : 0;
2938 }
2939
2940 static void sky2_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
2941 {
2942 const struct sky2_port *sky2 = netdev_priv(dev);
2943
2944 wol->supported = sky2_wol_supported(sky2->hw);
2945 wol->wolopts = sky2->wol;
2946 }
2947
2948 static int sky2_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
2949 {
2950 struct sky2_port *sky2 = netdev_priv(dev);
2951 struct sky2_hw *hw = sky2->hw;
2952
2953 if (wol->wolopts & ~sky2_wol_supported(sky2->hw))
2954 return -EOPNOTSUPP;
2955
2956 sky2->wol = wol->wolopts;
2957
2958 if (hw->chip_id == CHIP_ID_YUKON_EC_U ||
2959 hw->chip_id == CHIP_ID_YUKON_EX ||
2960 hw->chip_id == CHIP_ID_YUKON_FE_P)
2961 sky2_write32(hw, B0_CTST, sky2->wol
2962 ? Y2_HW_WOL_ON : Y2_HW_WOL_OFF);
2963
2964 if (!netif_running(dev))
2965 sky2_wol_init(sky2);
2966 return 0;
2967 }
2968
2969 static u32 sky2_supported_modes(const struct sky2_hw *hw)
2970 {
2971 if (sky2_is_copper(hw)) {
2972 u32 modes = SUPPORTED_10baseT_Half
2973 | SUPPORTED_10baseT_Full
2974 | SUPPORTED_100baseT_Half
2975 | SUPPORTED_100baseT_Full
2976 | SUPPORTED_Autoneg | SUPPORTED_TP;
2977
2978 if (hw->flags & SKY2_HW_GIGABIT)
2979 modes |= SUPPORTED_1000baseT_Half
2980 | SUPPORTED_1000baseT_Full;
2981 return modes;
2982 } else
2983 return SUPPORTED_1000baseT_Half
2984 | SUPPORTED_1000baseT_Full
2985 | SUPPORTED_Autoneg
2986 | SUPPORTED_FIBRE;
2987 }
2988
2989 static int sky2_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
2990 {
2991 struct sky2_port *sky2 = netdev_priv(dev);
2992 struct sky2_hw *hw = sky2->hw;
2993
2994 ecmd->transceiver = XCVR_INTERNAL;
2995 ecmd->supported = sky2_supported_modes(hw);
2996 ecmd->phy_address = PHY_ADDR_MARV;
2997 if (sky2_is_copper(hw)) {
2998 ecmd->port = PORT_TP;
2999 ecmd->speed = sky2->speed;
3000 } else {
3001 ecmd->speed = SPEED_1000;
3002 ecmd->port = PORT_FIBRE;
3003 }
3004
3005 ecmd->advertising = sky2->advertising;
3006 ecmd->autoneg = sky2->autoneg;
3007 ecmd->duplex = sky2->duplex;
3008 return 0;
3009 }
3010
3011 static int sky2_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
3012 {
3013 struct sky2_port *sky2 = netdev_priv(dev);
3014 const struct sky2_hw *hw = sky2->hw;
3015 u32 supported = sky2_supported_modes(hw);
3016
3017 if (ecmd->autoneg == AUTONEG_ENABLE) {
3018 ecmd->advertising = supported;
3019 sky2->duplex = -1;
3020 sky2->speed = -1;
3021 } else {
3022 u32 setting;
3023
3024 switch (ecmd->speed) {
3025 case SPEED_1000:
3026 if (ecmd->duplex == DUPLEX_FULL)
3027 setting = SUPPORTED_1000baseT_Full;
3028 else if (ecmd->duplex == DUPLEX_HALF)
3029 setting = SUPPORTED_1000baseT_Half;
3030 else
3031 return -EINVAL;
3032 break;
3033 case SPEED_100:
3034 if (ecmd->duplex == DUPLEX_FULL)
3035 setting = SUPPORTED_100baseT_Full;
3036 else if (ecmd->duplex == DUPLEX_HALF)
3037 setting = SUPPORTED_100baseT_Half;
3038 else
3039 return -EINVAL;
3040 break;
3041
3042 case SPEED_10:
3043 if (ecmd->duplex == DUPLEX_FULL)
3044 setting = SUPPORTED_10baseT_Full;
3045 else if (ecmd->duplex == DUPLEX_HALF)
3046 setting = SUPPORTED_10baseT_Half;
3047 else
3048 return -EINVAL;
3049 break;
3050 default:
3051 return -EINVAL;
3052 }
3053
3054 if ((setting & supported) == 0)
3055 return -EINVAL;
3056
3057 sky2->speed = ecmd->speed;
3058 sky2->duplex = ecmd->duplex;
3059 }
3060
3061 sky2->autoneg = ecmd->autoneg;
3062 sky2->advertising = ecmd->advertising;
3063
3064 if (netif_running(dev)) {
3065 sky2_phy_reinit(sky2);
3066 sky2_set_multicast(dev);
3067 }
3068
3069 return 0;
3070 }
3071
3072 static void sky2_get_drvinfo(struct net_device *dev,
3073 struct ethtool_drvinfo *info)
3074 {
3075 struct sky2_port *sky2 = netdev_priv(dev);
3076
3077 strcpy(info->driver, DRV_NAME);
3078 strcpy(info->version, DRV_VERSION);
3079 strcpy(info->fw_version, "N/A");
3080 strcpy(info->bus_info, pci_name(sky2->hw->pdev));
3081 }
3082
3083 static const struct sky2_stat {
3084 char name[ETH_GSTRING_LEN];
3085 u16 offset;
3086 } sky2_stats[] = {
3087 { "tx_bytes", GM_TXO_OK_HI },
3088 { "rx_bytes", GM_RXO_OK_HI },
3089 { "tx_broadcast", GM_TXF_BC_OK },
3090 { "rx_broadcast", GM_RXF_BC_OK },
3091 { "tx_multicast", GM_TXF_MC_OK },
3092 { "rx_multicast", GM_RXF_MC_OK },
3093 { "tx_unicast", GM_TXF_UC_OK },
3094 { "rx_unicast", GM_RXF_UC_OK },
3095 { "tx_mac_pause", GM_TXF_MPAUSE },
3096 { "rx_mac_pause", GM_RXF_MPAUSE },
3097 { "collisions", GM_TXF_COL },
3098 { "late_collision",GM_TXF_LAT_COL },
3099 { "aborted", GM_TXF_ABO_COL },
3100 { "single_collisions", GM_TXF_SNG_COL },
3101 { "multi_collisions", GM_TXF_MUL_COL },
3102
3103 { "rx_short", GM_RXF_SHT },
3104 { "rx_runt", GM_RXE_FRAG },
3105 { "rx_64_byte_packets", GM_RXF_64B },
3106 { "rx_65_to_127_byte_packets", GM_RXF_127B },
3107 { "rx_128_to_255_byte_packets", GM_RXF_255B },
3108 { "rx_256_to_511_byte_packets", GM_RXF_511B },
3109 { "rx_512_to_1023_byte_packets", GM_RXF_1023B },
3110 { "rx_1024_to_1518_byte_packets", GM_RXF_1518B },
3111 { "rx_1518_to_max_byte_packets", GM_RXF_MAX_SZ },
3112 { "rx_too_long", GM_RXF_LNG_ERR },
3113 { "rx_fifo_overflow", GM_RXE_FIFO_OV },
3114 { "rx_jabber", GM_RXF_JAB_PKT },
3115 { "rx_fcs_error", GM_RXF_FCS_ERR },
3116
3117 { "tx_64_byte_packets", GM_TXF_64B },
3118 { "tx_65_to_127_byte_packets", GM_TXF_127B },
3119 { "tx_128_to_255_byte_packets", GM_TXF_255B },
3120 { "tx_256_to_511_byte_packets", GM_TXF_511B },
3121 { "tx_512_to_1023_byte_packets", GM_TXF_1023B },
3122 { "tx_1024_to_1518_byte_packets", GM_TXF_1518B },
3123 { "tx_1519_to_max_byte_packets", GM_TXF_MAX_SZ },
3124 { "tx_fifo_underrun", GM_TXE_FIFO_UR },
3125 };
3126
3127 static u32 sky2_get_rx_csum(struct net_device *dev)
3128 {
3129 struct sky2_port *sky2 = netdev_priv(dev);
3130
3131 return sky2->rx_csum;
3132 }
3133
3134 static int sky2_set_rx_csum(struct net_device *dev, u32 data)
3135 {
3136 struct sky2_port *sky2 = netdev_priv(dev);
3137
3138 sky2->rx_csum = data;
3139
3140 sky2_write32(sky2->hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR),
3141 data ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
3142
3143 return 0;
3144 }
3145
3146 static u32 sky2_get_msglevel(struct net_device *netdev)
3147 {
3148 struct sky2_port *sky2 = netdev_priv(netdev);
3149 return sky2->msg_enable;
3150 }
3151
3152 static int sky2_nway_reset(struct net_device *dev)
3153 {
3154 struct sky2_port *sky2 = netdev_priv(dev);
3155
3156 if (!netif_running(dev) || sky2->autoneg != AUTONEG_ENABLE)
3157 return -EINVAL;
3158
3159 sky2_phy_reinit(sky2);
3160 sky2_set_multicast(dev);
3161
3162 return 0;
3163 }
3164
3165 static void sky2_phy_stats(struct sky2_port *sky2, u64 * data, unsigned count)
3166 {
3167 struct sky2_hw *hw = sky2->hw;
3168 unsigned port = sky2->port;
3169 int i;
3170
3171 data[0] = (u64) gma_read32(hw, port, GM_TXO_OK_HI) << 32
3172 | (u64) gma_read32(hw, port, GM_TXO_OK_LO);
3173 data[1] = (u64) gma_read32(hw, port, GM_RXO_OK_HI) << 32
3174 | (u64) gma_read32(hw, port, GM_RXO_OK_LO);
3175
3176 for (i = 2; i < count; i++)
3177 data[i] = (u64) gma_read32(hw, port, sky2_stats[i].offset);
3178 }
3179
3180 static void sky2_set_msglevel(struct net_device *netdev, u32 value)
3181 {
3182 struct sky2_port *sky2 = netdev_priv(netdev);
3183 sky2->msg_enable = value;
3184 }
3185
3186 static int sky2_get_sset_count(struct net_device *dev, int sset)
3187 {
3188 switch (sset) {
3189 case ETH_SS_STATS:
3190 return ARRAY_SIZE(sky2_stats);
3191 default:
3192 return -EOPNOTSUPP;
3193 }
3194 }
3195
3196 static void sky2_get_ethtool_stats(struct net_device *dev,
3197 struct ethtool_stats *stats, u64 * data)
3198 {
3199 struct sky2_port *sky2 = netdev_priv(dev);
3200
3201 sky2_phy_stats(sky2, data, ARRAY_SIZE(sky2_stats));
3202 }
3203
3204 static void sky2_get_strings(struct net_device *dev, u32 stringset, u8 * data)
3205 {
3206 int i;
3207
3208 switch (stringset) {
3209 case ETH_SS_STATS:
3210 for (i = 0; i < ARRAY_SIZE(sky2_stats); i++)
3211 memcpy(data + i * ETH_GSTRING_LEN,
3212 sky2_stats[i].name, ETH_GSTRING_LEN);
3213 break;
3214 }
3215 }
3216
3217 static int sky2_set_mac_address(struct net_device *dev, void *p)
3218 {
3219 struct sky2_port *sky2 = netdev_priv(dev);
3220 struct sky2_hw *hw = sky2->hw;
3221 unsigned port = sky2->port;
3222 const struct sockaddr *addr = p;
3223
3224 if (!is_valid_ether_addr(addr->sa_data))
3225 return -EADDRNOTAVAIL;
3226
3227 memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
3228 memcpy_toio(hw->regs + B2_MAC_1 + port * 8,
3229 dev->dev_addr, ETH_ALEN);
3230 memcpy_toio(hw->regs + B2_MAC_2 + port * 8,
3231 dev->dev_addr, ETH_ALEN);
3232
3233 /* virtual address for data */
3234 gma_set_addr(hw, port, GM_SRC_ADDR_2L, dev->dev_addr);
3235
3236 /* physical address: used for pause frames */
3237 gma_set_addr(hw, port, GM_SRC_ADDR_1L, dev->dev_addr);
3238
3239 return 0;
3240 }
3241
3242 static void inline sky2_add_filter(u8 filter[8], const u8 *addr)
3243 {
3244 u32 bit;
3245
3246 bit = ether_crc(ETH_ALEN, addr) & 63;
3247 filter[bit >> 3] |= 1 << (bit & 7);
3248 }
3249
3250 static void sky2_set_multicast(struct net_device *dev)
3251 {
3252 struct sky2_port *sky2 = netdev_priv(dev);
3253 struct sky2_hw *hw = sky2->hw;
3254 unsigned port = sky2->port;
3255 struct dev_mc_list *list = dev->mc_list;
3256 u16 reg;
3257 u8 filter[8];
3258 int rx_pause;
3259 static const u8 pause_mc_addr[ETH_ALEN] = { 0x1, 0x80, 0xc2, 0x0, 0x0, 0x1 };
3260
3261 rx_pause = (sky2->flow_status == FC_RX || sky2->flow_status == FC_BOTH);
3262 memset(filter, 0, sizeof(filter));
3263
3264 reg = gma_read16(hw, port, GM_RX_CTRL);
3265 reg |= GM_RXCR_UCF_ENA;
3266
3267 if (dev->flags & IFF_PROMISC) /* promiscuous */
3268 reg &= ~(GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA);
3269 else if (dev->flags & IFF_ALLMULTI)
3270 memset(filter, 0xff, sizeof(filter));
3271 else if (dev->mc_count == 0 && !rx_pause)
3272 reg &= ~GM_RXCR_MCF_ENA;
3273 else {
3274 int i;
3275 reg |= GM_RXCR_MCF_ENA;
3276
3277 if (rx_pause)
3278 sky2_add_filter(filter, pause_mc_addr);
3279
3280 for (i = 0; list && i < dev->mc_count; i++, list = list->next)
3281 sky2_add_filter(filter, list->dmi_addr);
3282 }
3283
3284 gma_write16(hw, port, GM_MC_ADDR_H1,
3285 (u16) filter[0] | ((u16) filter[1] << 8));
3286 gma_write16(hw, port, GM_MC_ADDR_H2,
3287 (u16) filter[2] | ((u16) filter[3] << 8));
3288 gma_write16(hw, port, GM_MC_ADDR_H3,
3289 (u16) filter[4] | ((u16) filter[5] << 8));
3290 gma_write16(hw, port, GM_MC_ADDR_H4,
3291 (u16) filter[6] | ((u16) filter[7] << 8));
3292
3293 gma_write16(hw, port, GM_RX_CTRL, reg);
3294 }
3295
3296 /* Can have one global because blinking is controlled by
3297 * ethtool and that is always under RTNL mutex
3298 */
3299 static void sky2_led(struct sky2_hw *hw, unsigned port, int on)
3300 {
3301 u16 pg;
3302
3303 switch (hw->chip_id) {
3304 case CHIP_ID_YUKON_XL:
3305 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
3306 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
3307 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
3308 on ? (PHY_M_LEDC_LOS_CTRL(1) |
3309 PHY_M_LEDC_INIT_CTRL(7) |
3310 PHY_M_LEDC_STA1_CTRL(7) |
3311 PHY_M_LEDC_STA0_CTRL(7))
3312 : 0);
3313
3314 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
3315 break;
3316
3317 default:
3318 gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
3319 gm_phy_write(hw, port, PHY_MARV_LED_OVER,
3320 on ? PHY_M_LED_ALL : 0);
3321 }
3322 }
3323
3324 /* blink LED's for finding board */
3325 static int sky2_phys_id(struct net_device *dev, u32 data)
3326 {
3327 struct sky2_port *sky2 = netdev_priv(dev);
3328 struct sky2_hw *hw = sky2->hw;
3329 unsigned port = sky2->port;
3330 u16 ledctrl, ledover = 0;
3331 long ms;
3332 int interrupted;
3333 int onoff = 1;
3334
3335 if (!data || data > (u32) (MAX_SCHEDULE_TIMEOUT / HZ))
3336 ms = jiffies_to_msecs(MAX_SCHEDULE_TIMEOUT);
3337 else
3338 ms = data * 1000;
3339
3340 /* save initial values */
3341 spin_lock_bh(&sky2->phy_lock);
3342 if (hw->chip_id == CHIP_ID_YUKON_XL) {
3343 u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
3344 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
3345 ledctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
3346 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
3347 } else {
3348 ledctrl = gm_phy_read(hw, port, PHY_MARV_LED_CTRL);
3349 ledover = gm_phy_read(hw, port, PHY_MARV_LED_OVER);
3350 }
3351
3352 interrupted = 0;
3353 while (!interrupted && ms > 0) {
3354 sky2_led(hw, port, onoff);
3355 onoff = !onoff;
3356
3357 spin_unlock_bh(&sky2->phy_lock);
3358 interrupted = msleep_interruptible(250);
3359 spin_lock_bh(&sky2->phy_lock);
3360
3361 ms -= 250;
3362 }
3363
3364 /* resume regularly scheduled programming */
3365 if (hw->chip_id == CHIP_ID_YUKON_XL) {
3366 u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
3367 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
3368 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ledctrl);
3369 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
3370 } else {
3371 gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
3372 gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
3373 }
3374 spin_unlock_bh(&sky2->phy_lock);
3375
3376 return 0;
3377 }
3378
3379 static void sky2_get_pauseparam(struct net_device *dev,
3380 struct ethtool_pauseparam *ecmd)
3381 {
3382 struct sky2_port *sky2 = netdev_priv(dev);
3383
3384 switch (sky2->flow_mode) {
3385 case FC_NONE:
3386 ecmd->tx_pause = ecmd->rx_pause = 0;
3387 break;
3388 case FC_TX:
3389 ecmd->tx_pause = 1, ecmd->rx_pause = 0;
3390 break;
3391 case FC_RX:
3392 ecmd->tx_pause = 0, ecmd->rx_pause = 1;
3393 break;
3394 case FC_BOTH:
3395 ecmd->tx_pause = ecmd->rx_pause = 1;
3396 }
3397
3398 ecmd->autoneg = sky2->autoneg;
3399 }
3400
3401 static int sky2_set_pauseparam(struct net_device *dev,
3402 struct ethtool_pauseparam *ecmd)
3403 {
3404 struct sky2_port *sky2 = netdev_priv(dev);
3405
3406 sky2->autoneg = ecmd->autoneg;
3407 sky2->flow_mode = sky2_flow(ecmd->rx_pause, ecmd->tx_pause);
3408
3409 if (netif_running(dev))
3410 sky2_phy_reinit(sky2);
3411
3412 return 0;
3413 }
3414
3415 static int sky2_get_coalesce(struct net_device *dev,
3416 struct ethtool_coalesce *ecmd)
3417 {
3418 struct sky2_port *sky2 = netdev_priv(dev);
3419 struct sky2_hw *hw = sky2->hw;
3420
3421 if (sky2_read8(hw, STAT_TX_TIMER_CTRL) == TIM_STOP)
3422 ecmd->tx_coalesce_usecs = 0;
3423 else {
3424 u32 clks = sky2_read32(hw, STAT_TX_TIMER_INI);
3425 ecmd->tx_coalesce_usecs = sky2_clk2us(hw, clks);
3426 }
3427 ecmd->tx_max_coalesced_frames = sky2_read16(hw, STAT_TX_IDX_TH);
3428
3429 if (sky2_read8(hw, STAT_LEV_TIMER_CTRL) == TIM_STOP)
3430 ecmd->rx_coalesce_usecs = 0;
3431 else {
3432 u32 clks = sky2_read32(hw, STAT_LEV_TIMER_INI);
3433 ecmd->rx_coalesce_usecs = sky2_clk2us(hw, clks);
3434 }
3435 ecmd->rx_max_coalesced_frames = sky2_read8(hw, STAT_FIFO_WM);
3436
3437 if (sky2_read8(hw, STAT_ISR_TIMER_CTRL) == TIM_STOP)
3438 ecmd->rx_coalesce_usecs_irq = 0;
3439 else {
3440 u32 clks = sky2_read32(hw, STAT_ISR_TIMER_INI);
3441 ecmd->rx_coalesce_usecs_irq = sky2_clk2us(hw, clks);
3442 }
3443
3444 ecmd->rx_max_coalesced_frames_irq = sky2_read8(hw, STAT_FIFO_ISR_WM);
3445
3446 return 0;
3447 }
3448
3449 /* Note: this affect both ports */
3450 static int sky2_set_coalesce(struct net_device *dev,
3451 struct ethtool_coalesce *ecmd)
3452 {
3453 struct sky2_port *sky2 = netdev_priv(dev);
3454 struct sky2_hw *hw = sky2->hw;
3455 const u32 tmax = sky2_clk2us(hw, 0x0ffffff);
3456
3457 if (ecmd->tx_coalesce_usecs > tmax ||
3458 ecmd->rx_coalesce_usecs > tmax ||
3459 ecmd->rx_coalesce_usecs_irq > tmax)
3460 return -EINVAL;
3461
3462 if (ecmd->tx_max_coalesced_frames >= TX_RING_SIZE-1)
3463 return -EINVAL;
3464 if (ecmd->rx_max_coalesced_frames > RX_MAX_PENDING)
3465 return -EINVAL;
3466 if (ecmd->rx_max_coalesced_frames_irq >RX_MAX_PENDING)
3467 return -EINVAL;
3468
3469 if (ecmd->tx_coalesce_usecs == 0)
3470 sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
3471 else {
3472 sky2_write32(hw, STAT_TX_TIMER_INI,
3473 sky2_us2clk(hw, ecmd->tx_coalesce_usecs));
3474 sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
3475 }
3476 sky2_write16(hw, STAT_TX_IDX_TH, ecmd->tx_max_coalesced_frames);
3477
3478 if (ecmd->rx_coalesce_usecs == 0)
3479 sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_STOP);
3480 else {
3481 sky2_write32(hw, STAT_LEV_TIMER_INI,
3482 sky2_us2clk(hw, ecmd->rx_coalesce_usecs));
3483 sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START);
3484 }
3485 sky2_write8(hw, STAT_FIFO_WM, ecmd->rx_max_coalesced_frames);
3486
3487 if (ecmd->rx_coalesce_usecs_irq == 0)
3488 sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_STOP);
3489 else {
3490 sky2_write32(hw, STAT_ISR_TIMER_INI,
3491 sky2_us2clk(hw, ecmd->rx_coalesce_usecs_irq));
3492 sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START);
3493 }
3494 sky2_write8(hw, STAT_FIFO_ISR_WM, ecmd->rx_max_coalesced_frames_irq);
3495 return 0;
3496 }
3497
3498 static void sky2_get_ringparam(struct net_device *dev,
3499 struct ethtool_ringparam *ering)
3500 {
3501 struct sky2_port *sky2 = netdev_priv(dev);
3502
3503 ering->rx_max_pending = RX_MAX_PENDING;
3504 ering->rx_mini_max_pending = 0;
3505 ering->rx_jumbo_max_pending = 0;
3506 ering->tx_max_pending = TX_RING_SIZE - 1;
3507
3508 ering->rx_pending = sky2->rx_pending;
3509 ering->rx_mini_pending = 0;
3510 ering->rx_jumbo_pending = 0;
3511 ering->tx_pending = sky2->tx_pending;
3512 }
3513
3514 static int sky2_set_ringparam(struct net_device *dev,
3515 struct ethtool_ringparam *ering)
3516 {
3517 struct sky2_port *sky2 = netdev_priv(dev);
3518 int err = 0;
3519
3520 if (ering->rx_pending > RX_MAX_PENDING ||
3521 ering->rx_pending < 8 ||
3522 ering->tx_pending < MAX_SKB_TX_LE ||
3523 ering->tx_pending > TX_RING_SIZE - 1)
3524 return -EINVAL;
3525
3526 if (netif_running(dev))
3527 sky2_down(dev);
3528
3529 sky2->rx_pending = ering->rx_pending;
3530 sky2->tx_pending = ering->tx_pending;
3531
3532 if (netif_running(dev)) {
3533 err = sky2_up(dev);
3534 if (err)
3535 dev_close(dev);
3536 else
3537 sky2_set_multicast(dev);
3538 }
3539
3540 return err;
3541 }
3542
3543 static int sky2_get_regs_len(struct net_device *dev)
3544 {
3545 return 0x4000;
3546 }
3547
3548 /*
3549 * Returns copy of control register region
3550 * Note: ethtool_get_regs always provides full size (16k) buffer
3551 */
3552 static void sky2_get_regs(struct net_device *dev, struct ethtool_regs *regs,
3553 void *p)
3554 {
3555 const struct sky2_port *sky2 = netdev_priv(dev);
3556 const void __iomem *io = sky2->hw->regs;
3557 unsigned int b;
3558
3559 regs->version = 1;
3560
3561 for (b = 0; b < 128; b++) {
3562 /* This complicated switch statement is to make sure and
3563 * only access regions that are unreserved.
3564 * Some blocks are only valid on dual port cards.
3565 * and block 3 has some special diagnostic registers that
3566 * are poison.
3567 */
3568 switch (b) {
3569 case 3:
3570 /* skip diagnostic ram region */
3571 memcpy_fromio(p + 0x10, io + 0x10, 128 - 0x10);
3572 break;
3573
3574 /* dual port cards only */
3575 case 5: /* Tx Arbiter 2 */
3576 case 9: /* RX2 */
3577 case 14 ... 15: /* TX2 */
3578 case 17: case 19: /* Ram Buffer 2 */
3579 case 22 ... 23: /* Tx Ram Buffer 2 */
3580 case 25: /* Rx MAC Fifo 1 */
3581 case 27: /* Tx MAC Fifo 2 */
3582 case 31: /* GPHY 2 */
3583 case 40 ... 47: /* Pattern Ram 2 */
3584 case 52: case 54: /* TCP Segmentation 2 */
3585 case 112 ... 116: /* GMAC 2 */
3586 if (sky2->hw->ports == 1)
3587 goto reserved;
3588 /* fall through */
3589 case 0: /* Control */
3590 case 2: /* Mac address */
3591 case 4: /* Tx Arbiter 1 */
3592 case 7: /* PCI express reg */
3593 case 8: /* RX1 */
3594 case 12 ... 13: /* TX1 */
3595 case 16: case 18:/* Rx Ram Buffer 1 */
3596 case 20 ... 21: /* Tx Ram Buffer 1 */
3597 case 24: /* Rx MAC Fifo 1 */
3598 case 26: /* Tx MAC Fifo 1 */
3599 case 28 ... 29: /* Descriptor and status unit */
3600 case 30: /* GPHY 1*/
3601 case 32 ... 39: /* Pattern Ram 1 */
3602 case 48: case 50: /* TCP Segmentation 1 */
3603 case 56 ... 60: /* PCI space */
3604 case 80 ... 84: /* GMAC 1 */
3605 memcpy_fromio(p, io, 128);
3606 break;
3607 default:
3608 reserved:
3609 memset(p, 0, 128);
3610 }
3611
3612 p += 128;
3613 io += 128;
3614 }
3615 }
3616
3617 /* In order to do Jumbo packets on these chips, need to turn off the
3618 * transmit store/forward. Therefore checksum offload won't work.
3619 */
3620 static int no_tx_offload(struct net_device *dev)
3621 {
3622 const struct sky2_port *sky2 = netdev_priv(dev);
3623 const struct sky2_hw *hw = sky2->hw;
3624
3625 return dev->mtu > ETH_DATA_LEN && hw->chip_id == CHIP_ID_YUKON_EC_U;
3626 }
3627
3628 static int sky2_set_tx_csum(struct net_device *dev, u32 data)
3629 {
3630 if (data && no_tx_offload(dev))
3631 return -EINVAL;
3632
3633 return ethtool_op_set_tx_csum(dev, data);
3634 }
3635
3636
3637 static int sky2_set_tso(struct net_device *dev, u32 data)
3638 {
3639 if (data && no_tx_offload(dev))
3640 return -EINVAL;
3641
3642 return ethtool_op_set_tso(dev, data);
3643 }
3644
3645 static int sky2_get_eeprom_len(struct net_device *dev)
3646 {
3647 struct sky2_port *sky2 = netdev_priv(dev);
3648 struct sky2_hw *hw = sky2->hw;
3649 u16 reg2;
3650
3651 reg2 = sky2_pci_read16(hw, PCI_DEV_REG2);
3652 return 1 << ( ((reg2 & PCI_VPD_ROM_SZ) >> 14) + 8);
3653 }
3654
3655 static u32 sky2_vpd_read(struct sky2_hw *hw, int cap, u16 offset)
3656 {
3657 u32 val;
3658
3659 sky2_pci_write16(hw, cap + PCI_VPD_ADDR, offset);
3660
3661 do {
3662 offset = sky2_pci_read16(hw, cap + PCI_VPD_ADDR);
3663 } while (!(offset & PCI_VPD_ADDR_F));
3664
3665 val = sky2_pci_read32(hw, cap + PCI_VPD_DATA);
3666 return val;
3667 }
3668
3669 static void sky2_vpd_write(struct sky2_hw *hw, int cap, u16 offset, u32 val)
3670 {
3671 sky2_pci_write16(hw, cap + PCI_VPD_DATA, val);
3672 sky2_pci_write32(hw, cap + PCI_VPD_ADDR, offset | PCI_VPD_ADDR_F);
3673 do {
3674 offset = sky2_pci_read16(hw, cap + PCI_VPD_ADDR);
3675 } while (offset & PCI_VPD_ADDR_F);
3676 }
3677
3678 static int sky2_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
3679 u8 *data)
3680 {
3681 struct sky2_port *sky2 = netdev_priv(dev);
3682 int cap = pci_find_capability(sky2->hw->pdev, PCI_CAP_ID_VPD);
3683 int length = eeprom->len;
3684 u16 offset = eeprom->offset;
3685
3686 if (!cap)
3687 return -EINVAL;
3688
3689 eeprom->magic = SKY2_EEPROM_MAGIC;
3690
3691 while (length > 0) {
3692 u32 val = sky2_vpd_read(sky2->hw, cap, offset);
3693 int n = min_t(int, length, sizeof(val));
3694
3695 memcpy(data, &val, n);
3696 length -= n;
3697 data += n;
3698 offset += n;
3699 }
3700 return 0;
3701 }
3702
3703 static int sky2_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
3704 u8 *data)
3705 {
3706 struct sky2_port *sky2 = netdev_priv(dev);
3707 int cap = pci_find_capability(sky2->hw->pdev, PCI_CAP_ID_VPD);
3708 int length = eeprom->len;
3709 u16 offset = eeprom->offset;
3710
3711 if (!cap)
3712 return -EINVAL;
3713
3714 if (eeprom->magic != SKY2_EEPROM_MAGIC)
3715 return -EINVAL;
3716
3717 while (length > 0) {
3718 u32 val;
3719 int n = min_t(int, length, sizeof(val));
3720
3721 if (n < sizeof(val))
3722 val = sky2_vpd_read(sky2->hw, cap, offset);
3723 memcpy(&val, data, n);
3724
3725 sky2_vpd_write(sky2->hw, cap, offset, val);
3726
3727 length -= n;
3728 data += n;
3729 offset += n;
3730 }
3731 return 0;
3732 }
3733
3734
3735 static const struct ethtool_ops sky2_ethtool_ops = {
3736 .get_settings = sky2_get_settings,
3737 .set_settings = sky2_set_settings,
3738 .get_drvinfo = sky2_get_drvinfo,
3739 .get_wol = sky2_get_wol,
3740 .set_wol = sky2_set_wol,
3741 .get_msglevel = sky2_get_msglevel,
3742 .set_msglevel = sky2_set_msglevel,
3743 .nway_reset = sky2_nway_reset,
3744 .get_regs_len = sky2_get_regs_len,
3745 .get_regs = sky2_get_regs,
3746 .get_link = ethtool_op_get_link,
3747 .get_eeprom_len = sky2_get_eeprom_len,
3748 .get_eeprom = sky2_get_eeprom,
3749 .set_eeprom = sky2_set_eeprom,
3750 .set_sg = ethtool_op_set_sg,
3751 .set_tx_csum = sky2_set_tx_csum,
3752 .set_tso = sky2_set_tso,
3753 .get_rx_csum = sky2_get_rx_csum,
3754 .set_rx_csum = sky2_set_rx_csum,
3755 .get_strings = sky2_get_strings,
3756 .get_coalesce = sky2_get_coalesce,
3757 .set_coalesce = sky2_set_coalesce,
3758 .get_ringparam = sky2_get_ringparam,
3759 .set_ringparam = sky2_set_ringparam,
3760 .get_pauseparam = sky2_get_pauseparam,
3761 .set_pauseparam = sky2_set_pauseparam,
3762 .phys_id = sky2_phys_id,
3763 .get_sset_count = sky2_get_sset_count,
3764 .get_ethtool_stats = sky2_get_ethtool_stats,
3765 };
3766
3767 #ifdef CONFIG_SKY2_DEBUG
3768
3769 static struct dentry *sky2_debug;
3770
3771 static int sky2_debug_show(struct seq_file *seq, void *v)
3772 {
3773 struct net_device *dev = seq->private;
3774 const struct sky2_port *sky2 = netdev_priv(dev);
3775 struct sky2_hw *hw = sky2->hw;
3776 unsigned port = sky2->port;
3777 unsigned idx, last;
3778 int sop;
3779
3780 if (!netif_running(dev))
3781 return -ENETDOWN;
3782
3783 seq_printf(seq, "IRQ src=%x mask=%x control=%x\n",
3784 sky2_read32(hw, B0_ISRC),
3785 sky2_read32(hw, B0_IMSK),
3786 sky2_read32(hw, B0_Y2_SP_ICR));
3787
3788 napi_disable(&hw->napi);
3789 last = sky2_read16(hw, STAT_PUT_IDX);
3790
3791 if (hw->st_idx == last)
3792 seq_puts(seq, "Status ring (empty)\n");
3793 else {
3794 seq_puts(seq, "Status ring\n");
3795 for (idx = hw->st_idx; idx != last && idx < STATUS_RING_SIZE;
3796 idx = RING_NEXT(idx, STATUS_RING_SIZE)) {
3797 const struct sky2_status_le *le = hw->st_le + idx;
3798 seq_printf(seq, "[%d] %#x %d %#x\n",
3799 idx, le->opcode, le->length, le->status);
3800 }
3801 seq_puts(seq, "\n");
3802 }
3803
3804 seq_printf(seq, "Tx ring pending=%u...%u report=%d done=%d\n",
3805 sky2->tx_cons, sky2->tx_prod,
3806 sky2_read16(hw, port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX),
3807 sky2_read16(hw, Q_ADDR(txqaddr[port], Q_DONE)));
3808
3809 /* Dump contents of tx ring */
3810 sop = 1;
3811 for (idx = sky2->tx_next; idx != sky2->tx_prod && idx < TX_RING_SIZE;
3812 idx = RING_NEXT(idx, TX_RING_SIZE)) {
3813 const struct sky2_tx_le *le = sky2->tx_le + idx;
3814 u32 a = le32_to_cpu(le->addr);
3815
3816 if (sop)
3817 seq_printf(seq, "%u:", idx);
3818 sop = 0;
3819
3820 switch(le->opcode & ~HW_OWNER) {
3821 case OP_ADDR64:
3822 seq_printf(seq, " %#x:", a);
3823 break;
3824 case OP_LRGLEN:
3825 seq_printf(seq, " mtu=%d", a);
3826 break;
3827 case OP_VLAN:
3828 seq_printf(seq, " vlan=%d", be16_to_cpu(le->length));
3829 break;
3830 case OP_TCPLISW:
3831 seq_printf(seq, " csum=%#x", a);
3832 break;
3833 case OP_LARGESEND:
3834 seq_printf(seq, " tso=%#x(%d)", a, le16_to_cpu(le->length));
3835 break;
3836 case OP_PACKET:
3837 seq_printf(seq, " %#x(%d)", a, le16_to_cpu(le->length));
3838 break;
3839 case OP_BUFFER:
3840 seq_printf(seq, " frag=%#x(%d)", a, le16_to_cpu(le->length));
3841 break;
3842 default:
3843 seq_printf(seq, " op=%#x,%#x(%d)", le->opcode,
3844 a, le16_to_cpu(le->length));
3845 }
3846
3847 if (le->ctrl & EOP) {
3848 seq_putc(seq, '\n');
3849 sop = 1;
3850 }
3851 }
3852
3853 seq_printf(seq, "\nRx ring hw get=%d put=%d last=%d\n",
3854 sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_GET_IDX)),
3855 last = sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_PUT_IDX)),
3856 sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_LAST_IDX)));
3857
3858 sky2_read32(hw, B0_Y2_SP_LISR);
3859 napi_enable(&hw->napi);
3860 return 0;
3861 }
3862
3863 static int sky2_debug_open(struct inode *inode, struct file *file)
3864 {
3865 return single_open(file, sky2_debug_show, inode->i_private);
3866 }
3867
3868 static const struct file_operations sky2_debug_fops = {
3869 .owner = THIS_MODULE,
3870 .open = sky2_debug_open,
3871 .read = seq_read,
3872 .llseek = seq_lseek,
3873 .release = single_release,
3874 };
3875
3876 /*
3877 * Use network device events to create/remove/rename
3878 * debugfs file entries
3879 */
3880 static int sky2_device_event(struct notifier_block *unused,
3881 unsigned long event, void *ptr)
3882 {
3883 struct net_device *dev = ptr;
3884 struct sky2_port *sky2 = netdev_priv(dev);
3885
3886 if (dev->open != sky2_up || !sky2_debug)
3887 return NOTIFY_DONE;
3888
3889 switch(event) {
3890 case NETDEV_CHANGENAME:
3891 if (sky2->debugfs) {
3892 sky2->debugfs = debugfs_rename(sky2_debug, sky2->debugfs,
3893 sky2_debug, dev->name);
3894 }
3895 break;
3896
3897 case NETDEV_GOING_DOWN:
3898 if (sky2->debugfs) {
3899 printk(KERN_DEBUG PFX "%s: remove debugfs\n",
3900 dev->name);
3901 debugfs_remove(sky2->debugfs);
3902 sky2->debugfs = NULL;
3903 }
3904 break;
3905
3906 case NETDEV_UP:
3907 sky2->debugfs = debugfs_create_file(dev->name, S_IRUGO,
3908 sky2_debug, dev,
3909 &sky2_debug_fops);
3910 if (IS_ERR(sky2->debugfs))
3911 sky2->debugfs = NULL;
3912 }
3913
3914 return NOTIFY_DONE;
3915 }
3916
3917 static struct notifier_block sky2_notifier = {
3918 .notifier_call = sky2_device_event,
3919 };
3920
3921
3922 static __init void sky2_debug_init(void)
3923 {
3924 struct dentry *ent;
3925
3926 ent = debugfs_create_dir("sky2", NULL);
3927 if (!ent || IS_ERR(ent))
3928 return;
3929
3930 sky2_debug = ent;
3931 register_netdevice_notifier(&sky2_notifier);
3932 }
3933
3934 static __exit void sky2_debug_cleanup(void)
3935 {
3936 if (sky2_debug) {
3937 unregister_netdevice_notifier(&sky2_notifier);
3938 debugfs_remove(sky2_debug);
3939 sky2_debug = NULL;
3940 }
3941 }
3942
3943 #else
3944 #define sky2_debug_init()
3945 #define sky2_debug_cleanup()
3946 #endif
3947
3948
3949 /* Initialize network device */
3950 static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
3951 unsigned port,
3952 int highmem, int wol)
3953 {
3954 struct sky2_port *sky2;
3955 struct net_device *dev = alloc_etherdev(sizeof(*sky2));
3956
3957 if (!dev) {
3958 dev_err(&hw->pdev->dev, "etherdev alloc failed\n");
3959 return NULL;
3960 }
3961
3962 SET_NETDEV_DEV(dev, &hw->pdev->dev);
3963 dev->irq = hw->pdev->irq;
3964 dev->open = sky2_up;
3965 dev->stop = sky2_down;
3966 dev->do_ioctl = sky2_ioctl;
3967 dev->hard_start_xmit = sky2_xmit_frame;
3968 dev->set_multicast_list = sky2_set_multicast;
3969 dev->set_mac_address = sky2_set_mac_address;
3970 dev->change_mtu = sky2_change_mtu;
3971 SET_ETHTOOL_OPS(dev, &sky2_ethtool_ops);
3972 dev->tx_timeout = sky2_tx_timeout;
3973 dev->watchdog_timeo = TX_WATCHDOG;
3974 #ifdef CONFIG_NET_POLL_CONTROLLER
3975 if (port == 0)
3976 dev->poll_controller = sky2_netpoll;
3977 #endif
3978
3979 sky2 = netdev_priv(dev);
3980 sky2->netdev = dev;
3981 sky2->hw = hw;
3982 sky2->msg_enable = netif_msg_init(debug, default_msg);
3983
3984 /* Auto speed and flow control */
3985 sky2->autoneg = AUTONEG_ENABLE;
3986 sky2->flow_mode = FC_BOTH;
3987
3988 sky2->duplex = -1;
3989 sky2->speed = -1;
3990 sky2->advertising = sky2_supported_modes(hw);
3991 sky2->rx_csum = (hw->chip_id != CHIP_ID_YUKON_XL);
3992 sky2->wol = wol;
3993
3994 spin_lock_init(&sky2->phy_lock);
3995 sky2->tx_pending = TX_DEF_PENDING;
3996 sky2->rx_pending = RX_DEF_PENDING;
3997
3998 hw->dev[port] = dev;
3999
4000 sky2->port = port;
4001
4002 dev->features |= NETIF_F_TSO | NETIF_F_IP_CSUM | NETIF_F_SG;
4003 if (highmem)
4004 dev->features |= NETIF_F_HIGHDMA;
4005
4006 #ifdef SKY2_VLAN_TAG_USED
4007 /* The workaround for FE+ status conflicts with VLAN tag detection. */
4008 if (!(sky2->hw->chip_id == CHIP_ID_YUKON_FE_P &&
4009 sky2->hw->chip_rev == CHIP_REV_YU_FE2_A0)) {
4010 dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
4011 dev->vlan_rx_register = sky2_vlan_rx_register;
4012 }
4013 #endif
4014
4015 /* read the mac address */
4016 memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN);
4017 memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
4018
4019 return dev;
4020 }
4021
4022 static void __devinit sky2_show_addr(struct net_device *dev)
4023 {
4024 const struct sky2_port *sky2 = netdev_priv(dev);
4025 DECLARE_MAC_BUF(mac);
4026
4027 if (netif_msg_probe(sky2))
4028 printk(KERN_INFO PFX "%s: addr %s\n",
4029 dev->name, print_mac(mac, dev->dev_addr));
4030 }
4031
4032 /* Handle software interrupt used during MSI test */
4033 static irqreturn_t __devinit sky2_test_intr(int irq, void *dev_id)
4034 {
4035 struct sky2_hw *hw = dev_id;
4036 u32 status = sky2_read32(hw, B0_Y2_SP_ISRC2);
4037
4038 if (status == 0)
4039 return IRQ_NONE;
4040
4041 if (status & Y2_IS_IRQ_SW) {
4042 hw->flags |= SKY2_HW_USE_MSI;
4043 wake_up(&hw->msi_wait);
4044 sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
4045 }
4046 sky2_write32(hw, B0_Y2_SP_ICR, 2);
4047
4048 return IRQ_HANDLED;
4049 }
4050
4051 /* Test interrupt path by forcing a a software IRQ */
4052 static int __devinit sky2_test_msi(struct sky2_hw *hw)
4053 {
4054 struct pci_dev *pdev = hw->pdev;
4055 int err;
4056
4057 init_waitqueue_head (&hw->msi_wait);
4058
4059 sky2_write32(hw, B0_IMSK, Y2_IS_IRQ_SW);
4060
4061 err = request_irq(pdev->irq, sky2_test_intr, 0, DRV_NAME, hw);
4062 if (err) {
4063 dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq);
4064 return err;
4065 }
4066
4067 sky2_write8(hw, B0_CTST, CS_ST_SW_IRQ);
4068 sky2_read8(hw, B0_CTST);
4069
4070 wait_event_timeout(hw->msi_wait, (hw->flags & SKY2_HW_USE_MSI), HZ/10);
4071
4072 if (!(hw->flags & SKY2_HW_USE_MSI)) {
4073 /* MSI test failed, go back to INTx mode */
4074 dev_info(&pdev->dev, "No interrupt generated using MSI, "
4075 "switching to INTx mode.\n");
4076
4077 err = -EOPNOTSUPP;
4078 sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
4079 }
4080
4081 sky2_write32(hw, B0_IMSK, 0);
4082 sky2_read32(hw, B0_IMSK);
4083
4084 free_irq(pdev->irq, hw);
4085
4086 return err;
4087 }
4088
4089 static int __devinit pci_wake_enabled(struct pci_dev *dev)
4090 {
4091 int pm = pci_find_capability(dev, PCI_CAP_ID_PM);
4092 u16 value;
4093
4094 if (!pm)
4095 return 0;
4096 if (pci_read_config_word(dev, pm + PCI_PM_CTRL, &value))
4097 return 0;
4098 return value & PCI_PM_CTRL_PME_ENABLE;
4099 }
4100
4101 static int __devinit sky2_probe(struct pci_dev *pdev,
4102 const struct pci_device_id *ent)
4103 {
4104 struct net_device *dev;
4105 struct sky2_hw *hw;
4106 int err, using_dac = 0, wol_default;
4107
4108 err = pci_enable_device(pdev);
4109 if (err) {
4110 dev_err(&pdev->dev, "cannot enable PCI device\n");
4111 goto err_out;
4112 }
4113
4114 err = pci_request_regions(pdev, DRV_NAME);
4115 if (err) {
4116 dev_err(&pdev->dev, "cannot obtain PCI resources\n");
4117 goto err_out_disable;
4118 }
4119
4120 pci_set_master(pdev);
4121
4122 if (sizeof(dma_addr_t) > sizeof(u32) &&
4123 !(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK))) {
4124 using_dac = 1;
4125 err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
4126 if (err < 0) {
4127 dev_err(&pdev->dev, "unable to obtain 64 bit DMA "
4128 "for consistent allocations\n");
4129 goto err_out_free_regions;
4130 }
4131 } else {
4132 err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
4133 if (err) {
4134 dev_err(&pdev->dev, "no usable DMA configuration\n");
4135 goto err_out_free_regions;
4136 }
4137 }
4138
4139 wol_default = pci_wake_enabled(pdev) ? WAKE_MAGIC : 0;
4140
4141 err = -ENOMEM;
4142 hw = kzalloc(sizeof(*hw), GFP_KERNEL);
4143 if (!hw) {
4144 dev_err(&pdev->dev, "cannot allocate hardware struct\n");
4145 goto err_out_free_regions;
4146 }
4147
4148 hw->pdev = pdev;
4149
4150 hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000);
4151 if (!hw->regs) {
4152 dev_err(&pdev->dev, "cannot map device registers\n");
4153 goto err_out_free_hw;
4154 }
4155
4156 #ifdef __BIG_ENDIAN
4157 /* The sk98lin vendor driver uses hardware byte swapping but
4158 * this driver uses software swapping.
4159 */
4160 {
4161 u32 reg;
4162 reg = sky2_pci_read32(hw, PCI_DEV_REG2);
4163 reg &= ~PCI_REV_DESC;
4164 sky2_pci_write32(hw, PCI_DEV_REG2, reg);
4165 }
4166 #endif
4167
4168 /* ring for status responses */
4169 hw->st_le = pci_alloc_consistent(pdev, STATUS_LE_BYTES, &hw->st_dma);
4170 if (!hw->st_le)
4171 goto err_out_iounmap;
4172
4173 err = sky2_init(hw);
4174 if (err)
4175 goto err_out_iounmap;
4176
4177 dev_info(&pdev->dev, "v%s addr 0x%llx irq %d Yukon-%s (0x%x) rev %d\n",
4178 DRV_VERSION, (unsigned long long)pci_resource_start(pdev, 0),
4179 pdev->irq, yukon2_name[hw->chip_id - CHIP_ID_YUKON_XL],
4180 hw->chip_id, hw->chip_rev);
4181
4182 sky2_reset(hw);
4183
4184 dev = sky2_init_netdev(hw, 0, using_dac, wol_default);
4185 if (!dev) {
4186 err = -ENOMEM;
4187 goto err_out_free_pci;
4188 }
4189
4190 if (!disable_msi && pci_enable_msi(pdev) == 0) {
4191 err = sky2_test_msi(hw);
4192 if (err == -EOPNOTSUPP)
4193 pci_disable_msi(pdev);
4194 else if (err)
4195 goto err_out_free_netdev;
4196 }
4197
4198 err = register_netdev(dev);
4199 if (err) {
4200 dev_err(&pdev->dev, "cannot register net device\n");
4201 goto err_out_free_netdev;
4202 }
4203
4204 netif_napi_add(dev, &hw->napi, sky2_poll, NAPI_WEIGHT);
4205
4206 err = request_irq(pdev->irq, sky2_intr,
4207 (hw->flags & SKY2_HW_USE_MSI) ? 0 : IRQF_SHARED,
4208 dev->name, hw);
4209 if (err) {
4210 dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq);
4211 goto err_out_unregister;
4212 }
4213 sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
4214 napi_enable(&hw->napi);
4215
4216 sky2_show_addr(dev);
4217
4218 if (hw->ports > 1) {
4219 struct net_device *dev1;
4220
4221 dev1 = sky2_init_netdev(hw, 1, using_dac, wol_default);
4222 if (!dev1)
4223 dev_warn(&pdev->dev, "allocation for second device failed\n");
4224 else if ((err = register_netdev(dev1))) {
4225 dev_warn(&pdev->dev,
4226 "register of second port failed (%d)\n", err);
4227 hw->dev[1] = NULL;
4228 free_netdev(dev1);
4229 } else
4230 sky2_show_addr(dev1);
4231 }
4232
4233 setup_timer(&hw->watchdog_timer, sky2_watchdog, (unsigned long) hw);
4234 INIT_WORK(&hw->restart_work, sky2_restart);
4235
4236 pci_set_drvdata(pdev, hw);
4237
4238 return 0;
4239
4240 err_out_unregister:
4241 if (hw->flags & SKY2_HW_USE_MSI)
4242 pci_disable_msi(pdev);
4243 unregister_netdev(dev);
4244 err_out_free_netdev:
4245 free_netdev(dev);
4246 err_out_free_pci:
4247 sky2_write8(hw, B0_CTST, CS_RST_SET);
4248 pci_free_consistent(pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma);
4249 err_out_iounmap:
4250 iounmap(hw->regs);
4251 err_out_free_hw:
4252 kfree(hw);
4253 err_out_free_regions:
4254 pci_release_regions(pdev);
4255 err_out_disable:
4256 pci_disable_device(pdev);
4257 err_out:
4258 pci_set_drvdata(pdev, NULL);
4259 return err;
4260 }
4261
4262 static void __devexit sky2_remove(struct pci_dev *pdev)
4263 {
4264 struct sky2_hw *hw = pci_get_drvdata(pdev);
4265 int i;
4266
4267 if (!hw)
4268 return;
4269
4270 del_timer_sync(&hw->watchdog_timer);
4271 cancel_work_sync(&hw->restart_work);
4272
4273 for (i = hw->ports-1; i >= 0; --i)
4274 unregister_netdev(hw->dev[i]);
4275
4276 sky2_write32(hw, B0_IMSK, 0);
4277
4278 sky2_power_aux(hw);
4279
4280 sky2_write16(hw, B0_Y2LED, LED_STAT_OFF);
4281 sky2_write8(hw, B0_CTST, CS_RST_SET);
4282 sky2_read8(hw, B0_CTST);
4283
4284 free_irq(pdev->irq, hw);
4285 if (hw->flags & SKY2_HW_USE_MSI)
4286 pci_disable_msi(pdev);
4287 pci_free_consistent(pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma);
4288 pci_release_regions(pdev);
4289 pci_disable_device(pdev);
4290
4291 for (i = hw->ports-1; i >= 0; --i)
4292 free_netdev(hw->dev[i]);
4293
4294 iounmap(hw->regs);
4295 kfree(hw);
4296
4297 pci_set_drvdata(pdev, NULL);
4298 }
4299
4300 #ifdef CONFIG_PM
4301 static int sky2_suspend(struct pci_dev *pdev, pm_message_t state)
4302 {
4303 struct sky2_hw *hw = pci_get_drvdata(pdev);
4304 int i, wol = 0;
4305
4306 if (!hw)
4307 return 0;
4308
4309 for (i = 0; i < hw->ports; i++) {
4310 struct net_device *dev = hw->dev[i];
4311 struct sky2_port *sky2 = netdev_priv(dev);
4312
4313 if (netif_running(dev))
4314 sky2_down(dev);
4315
4316 if (sky2->wol)
4317 sky2_wol_init(sky2);
4318
4319 wol |= sky2->wol;
4320 }
4321
4322 sky2_write32(hw, B0_IMSK, 0);
4323 napi_disable(&hw->napi);
4324 sky2_power_aux(hw);
4325
4326 pci_save_state(pdev);
4327 pci_enable_wake(pdev, pci_choose_state(pdev, state), wol);
4328 pci_set_power_state(pdev, pci_choose_state(pdev, state));
4329
4330 return 0;
4331 }
4332
4333 static int sky2_resume(struct pci_dev *pdev)
4334 {
4335 struct sky2_hw *hw = pci_get_drvdata(pdev);
4336 int i, err;
4337
4338 if (!hw)
4339 return 0;
4340
4341 err = pci_set_power_state(pdev, PCI_D0);
4342 if (err)
4343 goto out;
4344
4345 err = pci_restore_state(pdev);
4346 if (err)
4347 goto out;
4348
4349 pci_enable_wake(pdev, PCI_D0, 0);
4350
4351 /* Re-enable all clocks */
4352 if (hw->chip_id == CHIP_ID_YUKON_EX ||
4353 hw->chip_id == CHIP_ID_YUKON_EC_U ||
4354 hw->chip_id == CHIP_ID_YUKON_FE_P)
4355 sky2_pci_write32(hw, PCI_DEV_REG3, 0);
4356
4357 sky2_reset(hw);
4358 sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
4359 napi_enable(&hw->napi);
4360
4361 for (i = 0; i < hw->ports; i++) {
4362 struct net_device *dev = hw->dev[i];
4363 if (netif_running(dev)) {
4364 err = sky2_up(dev);
4365 if (err) {
4366 printk(KERN_ERR PFX "%s: could not up: %d\n",
4367 dev->name, err);
4368 dev_close(dev);
4369 goto out;
4370 }
4371
4372 sky2_set_multicast(dev);
4373 }
4374 }
4375
4376 return 0;
4377 out:
4378 dev_err(&pdev->dev, "resume failed (%d)\n", err);
4379 pci_disable_device(pdev);
4380 return err;
4381 }
4382 #endif
4383
4384 static void sky2_shutdown(struct pci_dev *pdev)
4385 {
4386 struct sky2_hw *hw = pci_get_drvdata(pdev);
4387 int i, wol = 0;
4388
4389 if (!hw)
4390 return;
4391
4392 del_timer_sync(&hw->watchdog_timer);
4393
4394 for (i = 0; i < hw->ports; i++) {
4395 struct net_device *dev = hw->dev[i];
4396 struct sky2_port *sky2 = netdev_priv(dev);
4397
4398 if (sky2->wol) {
4399 wol = 1;
4400 sky2_wol_init(sky2);
4401 }
4402 }
4403
4404 if (wol)
4405 sky2_power_aux(hw);
4406
4407 pci_enable_wake(pdev, PCI_D3hot, wol);
4408 pci_enable_wake(pdev, PCI_D3cold, wol);
4409
4410 pci_disable_device(pdev);
4411 pci_set_power_state(pdev, PCI_D3hot);
4412
4413 }
4414
4415 static struct pci_driver sky2_driver = {
4416 .name = DRV_NAME,
4417 .id_table = sky2_id_table,
4418 .probe = sky2_probe,
4419 .remove = __devexit_p(sky2_remove),
4420 #ifdef CONFIG_PM
4421 .suspend = sky2_suspend,
4422 .resume = sky2_resume,
4423 #endif
4424 .shutdown = sky2_shutdown,
4425 };
4426
4427 static int __init sky2_init_module(void)
4428 {
4429 sky2_debug_init();
4430 return pci_register_driver(&sky2_driver);
4431 }
4432
4433 static void __exit sky2_cleanup_module(void)
4434 {
4435 pci_unregister_driver(&sky2_driver);
4436 sky2_debug_cleanup();
4437 }
4438
4439 module_init(sky2_init_module);
4440 module_exit(sky2_cleanup_module);
4441
4442 MODULE_DESCRIPTION("Marvell Yukon 2 Gigabit Ethernet driver");
4443 MODULE_AUTHOR("Stephen Hemminger <shemminger@linux-foundation.org>");
4444 MODULE_LICENSE("GPL");
4445 MODULE_VERSION(DRV_VERSION);
Community contributions to the Openmoko Kernel