drivers/ide/pci/cs5530.c

   1 /*
   2  * linux/drivers/ide/pci/cs5530.c               Version 0.73    Mar 10 2007
   3  *
   4  * Copyright (C) 2000                   Andre Hedrick <andre@linux-ide.org>
   5  * Copyright (C) 2000                   Mark Lord <mlord@pobox.com>
   6  * Copyright (C) 2007                   Bartlomiej Zolnierkiewicz
   7  *
   8  * May be copied or modified under the terms of the GNU General Public License
   9  *
  10  * Development of this chipset driver was funded
  11  * by the nice folks at National Semiconductor.
  12  *
  13  * Documentation:
  14  *      CS5530 documentation available from National Semiconductor.
  15  */
  16
  17 #include <linux/module.h>
  18 #include <linux/types.h>
  19 #include <linux/kernel.h>
  20 #include <linux/delay.h>
  21 #include <linux/timer.h>
  22 #include <linux/mm.h>
  23 #include <linux/ioport.h>
  24 #include <linux/blkdev.h>
  25 #include <linux/hdreg.h>
  26 #include <linux/interrupt.h>
  27 #include <linux/pci.h>
  28 #include <linux/init.h>
  29 #include <linux/ide.h>
  30 #include <asm/io.h>
  31 #include <asm/irq.h>
  32
  33 /**
  34  *      cs5530_xfer_set_mode    -       set a new transfer mode at the drive
  35  *      @drive: drive to tune
  36  *      @mode: new mode
  37  *
  38  *      Logging wrapper to the IDE driver speed configuration. This can
  39  *      probably go away now.
  40  */
  41
  42 static int cs5530_set_xfer_mode (ide_drive_t *drive, u8 mode)
  43 {
  44         printk(KERN_DEBUG "%s: cs5530_set_xfer_mode(%s)\n",
  45                 drive->name, ide_xfer_verbose(mode));
  46         return (ide_config_drive_speed(drive, mode));
  47 }
  48
  49 /*
  50  * Here are the standard PIO mode 0-4 timings for each "format".
  51  * Format-0 uses fast data reg timings, with slower command reg timings.
  52  * Format-1 uses fast timings for all registers, but won't work with all drives.
  53  */
  54 static unsigned int cs5530_pio_timings[2][5] = {
  55         {0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010},
  56         {0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010}
  57 };
  58
  59 /*
  60  * After chip reset, the PIO timings are set to 0x0000e132, which is not valid.
  61  */
  62 #define CS5530_BAD_PIO(timings) (((timings)&~0x80000000)==0x0000e132)
  63 #define CS5530_BASEREG(hwif)    (((hwif)->dma_base & ~0xf) + ((hwif)->channel ? 0x30 : 0x20))
  64
  65 static void cs5530_tunepio(ide_drive_t *drive, u8 pio)
  66 {
  67         unsigned long basereg = CS5530_BASEREG(drive->hwif);
  68         unsigned int format = (inl(basereg + 4) >> 31) & 1;
  69
  70         outl(cs5530_pio_timings[format][pio], basereg + ((drive->dn & 1)<<3));
  71 }
  72
  73 /**
  74  *      cs5530_tuneproc         -       select/set PIO modes
  75  *
  76  *      cs5530_tuneproc() handles selection/setting of PIO modes
  77  *      for both the chipset and drive.
  78  *
  79  *      The ide_init_cs5530() routine guarantees that all drives
  80  *      will have valid default PIO timings set up before we get here.
  81  */
  82
  83 static void cs5530_tuneproc (ide_drive_t *drive, u8 pio)        /* pio=255 means "autotune" */
  84 {
  85         pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
  86
  87         if (cs5530_set_xfer_mode(drive, XFER_PIO_0 + pio) == 0)
  88                 cs5530_tunepio(drive, pio);
  89 }
  90
  91 /**
  92  *      cs5530_udma_filter      -       UDMA filter
  93  *      @drive: drive
  94  *
  95  *      cs5530_udma_filter() does UDMA mask filtering for the given drive
  96  *      taking into the consideration capabilities of the mate device.
  97  *
  98  *      The CS5530 specifies that two drives sharing a cable cannot mix
  99  *      UDMA/MDMA.  It has to be one or the other, for the pair, though
 100  *      different timings can still be chosen for each drive.  We could
 101  *      set the appropriate timing bits on the fly, but that might be
 102  *      a bit confusing.  So, for now we statically handle this requirement
 103  *      by looking at our mate drive to see what it is capable of, before
 104  *      choosing a mode for our own drive.
 105  *
 106  *      Note: This relies on the fact we never fail from UDMA to MWDMA2
 107  *      but instead drop to PIO.
 108  */
 109
 110 static u8 cs5530_udma_filter(ide_drive_t *drive)
 111 {
 112         ide_hwif_t *hwif = drive->hwif;
 113         ide_drive_t *mate = &hwif->drives[(drive->dn & 1) ^ 1];
 114         struct hd_driveid *mateid = mate->id;
 115         u8 mask = hwif->ultra_mask;
 116
 117         if (mate->present == 0)
 118                 goto out;
 119
 120         if ((mateid->capability & 1) && __ide_dma_bad_drive(mate) == 0) {
 121                 if ((mateid->field_valid & 4) && (mateid->dma_ultra & 7))
 122                         goto out;
 123                 if ((mateid->field_valid & 2) && (mateid->dma_mword & 7))
 124                         mask = 0;
 125         }
 126 out:
 127         return mask;
 128 }
 129
 130 /**
 131  *      cs5530_config_dma       -       set DMA/UDMA mode
 132  *      @drive: drive to tune
 133  *
 134  *      cs5530_config_dma() handles setting of DMA/UDMA mode
 135  *      for both the chipset and drive.
 136  */
 137
 138 static int cs5530_config_dma(ide_drive_t *drive)
 139 {
 140         if (ide_tune_dma(drive))
 141                 return 0;
 142
 143         return 1;
 144 }
 145
 146 static int cs5530_tune_chipset(ide_drive_t *drive, u8 mode)
 147 {
 148         unsigned long basereg;
 149         unsigned int reg, timings = 0;
 150
 151         mode = ide_rate_filter(drive, mode);
 152
 153         /*
 154          * Tell the drive to switch to the new mode; abort on failure.
 155          */
 156         if (cs5530_set_xfer_mode(drive, mode))
 157                 return 1;       /* failure */
 158
 159         /*
 160          * Now tune the chipset to match the drive:
 161          */
 162         switch (mode) {
 163                 case XFER_UDMA_0:       timings = 0x00921250; break;
 164                 case XFER_UDMA_1:       timings = 0x00911140; break;
 165                 case XFER_UDMA_2:       timings = 0x00911030; break;
 166                 case XFER_MW_DMA_0:     timings = 0x00077771; break;
 167                 case XFER_MW_DMA_1:     timings = 0x00012121; break;
 168                 case XFER_MW_DMA_2:     timings = 0x00002020; break;
 169                 case XFER_PIO_4:
 170                 case XFER_PIO_3:
 171                 case XFER_PIO_2:
 172                 case XFER_PIO_1:
 173                 case XFER_PIO_0:
 174                         cs5530_tunepio(drive, mode - XFER_PIO_0);
 175                         return 0;
 176                 default:
 177                         BUG();
 178                         break;
 179         }
 180         basereg = CS5530_BASEREG(drive->hwif);
 181         reg = inl(basereg + 4);                 /* get drive0 config register */
 182         timings |= reg & 0x80000000;            /* preserve PIO format bit */
 183         if ((drive-> dn & 1) == 0) {            /* are we configuring drive0? */
 184                 outl(timings, basereg + 4);     /* write drive0 config register */
 185         } else {
 186                 if (timings & 0x00100000)
 187                         reg |=  0x00100000;     /* enable UDMA timings for both drives */
 188                 else
 189                         reg &= ~0x00100000;     /* disable UDMA timings for both drives */
 190                 outl(reg, basereg + 4);         /* write drive0 config register */
 191                 outl(timings, basereg + 12);    /* write drive1 config register */
 192         }
 193
 194         return 0;       /* success */
 195 }
 196
 197 /**
 198  *      init_chipset_5530       -       set up 5530 bridge
 199  *      @dev: PCI device
 200  *      @name: device name
 201  *
 202  *      Initialize the cs5530 bridge for reliable IDE DMA operation.
 203  */
 204
 205 static unsigned int __devinit init_chipset_cs5530 (struct pci_dev *dev, const char *name)
 206 {
 207         struct pci_dev *master_0 = NULL, *cs5530_0 = NULL;
 208         unsigned long flags;
 209
 210         dev = NULL;
 211         while ((dev = pci_get_device(PCI_VENDOR_ID_CYRIX, PCI_ANY_ID, dev)) != NULL) {
 212                 switch (dev->device) {
 213                         case PCI_DEVICE_ID_CYRIX_PCI_MASTER:
 214                                 master_0 = pci_dev_get(dev);
 215                                 break;
 216                         case PCI_DEVICE_ID_CYRIX_5530_LEGACY:
 217                                 cs5530_0 = pci_dev_get(dev);
 218                                 break;
 219                 }
 220         }
 221         if (!master_0) {
 222                 printk(KERN_ERR "%s: unable to locate PCI MASTER function\n", name);
 223                 goto out;
 224         }
 225         if (!cs5530_0) {
 226                 printk(KERN_ERR "%s: unable to locate CS5530 LEGACY function\n", name);
 227                 goto out;
 228         }
 229
 230         spin_lock_irqsave(&ide_lock, flags);
 231                 /* all CPUs (there should only be one CPU with this chipset) */
 232
 233         /*
 234          * Enable BusMaster and MemoryWriteAndInvalidate for the cs5530:
 235          * -->  OR 0x14 into 16-bit PCI COMMAND reg of function 0 of the cs5530
 236          */
 237
 238         pci_set_master(cs5530_0);
 239         pci_set_mwi(cs5530_0);
 240
 241         /*
 242          * Set PCI CacheLineSize to 16-bytes:
 243          * --> Write 0x04 into 8-bit PCI CACHELINESIZE reg of function 0 of the cs5530
 244          */
 245
 246         pci_write_config_byte(cs5530_0, PCI_CACHE_LINE_SIZE, 0x04);
 247
 248         /*
 249          * Disable trapping of UDMA register accesses (Win98 hack):
 250          * --> Write 0x5006 into 16-bit reg at offset 0xd0 of function 0 of the cs5530
 251          */
 252
 253         pci_write_config_word(cs5530_0, 0xd0, 0x5006);
 254
 255         /*
 256          * Bit-1 at 0x40 enables MemoryWriteAndInvalidate on internal X-bus:
 257          * The other settings are what is necessary to get the register
 258          * into a sane state for IDE DMA operation.
 259          */
 260
 261         pci_write_config_byte(master_0, 0x40, 0x1e);
 262
 263         /*
 264          * Set max PCI burst size (16-bytes seems to work best):
 265          *         16bytes: set bit-1 at 0x41 (reg value of 0x16)
 266          *      all others: clear bit-1 at 0x41, and do:
 267          *        128bytes: OR 0x00 at 0x41
 268          *        256bytes: OR 0x04 at 0x41
 269          *        512bytes: OR 0x08 at 0x41
 270          *       1024bytes: OR 0x0c at 0x41
 271          */
 272
 273         pci_write_config_byte(master_0, 0x41, 0x14);
 274
 275         /*
 276          * These settings are necessary to get the chip
 277          * into a sane state for IDE DMA operation.
 278          */
 279
 280         pci_write_config_byte(master_0, 0x42, 0x00);
 281         pci_write_config_byte(master_0, 0x43, 0xc1);
 282
 283         spin_unlock_irqrestore(&ide_lock, flags);
 284
 285 out:
 286         pci_dev_put(master_0);
 287         pci_dev_put(cs5530_0);
 288         return 0;
 289 }
 290
 291 /**
 292  *      init_hwif_cs5530        -       initialise an IDE channel
 293  *      @hwif: IDE to initialize
 294  *
 295  *      This gets invoked by the IDE driver once for each channel. It
 296  *      performs channel-specific pre-initialization before drive probing.
 297  */
 298
 299 static void __devinit init_hwif_cs5530 (ide_hwif_t *hwif)
 300 {
 301         unsigned long basereg;
 302         u32 d0_timings;
 303         hwif->autodma = 0;
 304
 305         if (hwif->mate)
 306                 hwif->serialized = hwif->mate->serialized = 1;
 307
 308         hwif->tuneproc = &cs5530_tuneproc;
 309         hwif->speedproc = &cs5530_tune_chipset;
 310
 311         basereg = CS5530_BASEREG(hwif);
 312         d0_timings = inl(basereg + 0);
 313         if (CS5530_BAD_PIO(d0_timings)) {
 314                 /* PIO timings not initialized? */
 315                 outl(cs5530_pio_timings[(d0_timings >> 31) & 1][0], basereg + 0);
 316                 if (!hwif->drives[0].autotune)
 317                         hwif->drives[0].autotune = 1;
 318                         /* needs autotuning later */
 319         }
 320         if (CS5530_BAD_PIO(inl(basereg + 8))) {
 321                 /* PIO timings not initialized? */
 322                 outl(cs5530_pio_timings[(d0_timings >> 31) & 1][0], basereg + 8);
 323                 if (!hwif->drives[1].autotune)
 324                         hwif->drives[1].autotune = 1;
 325                         /* needs autotuning later */
 326         }
 327
 328         hwif->atapi_dma = 1;
 329         hwif->ultra_mask = 0x07;
 330         hwif->mwdma_mask = 0x07;
 331
 332         hwif->udma_filter = cs5530_udma_filter;
 333         hwif->ide_dma_check = &cs5530_config_dma;
 334         if (!noautodma)
 335                 hwif->autodma = 1;
 336         hwif->drives[0].autodma = hwif->autodma;
 337         hwif->drives[1].autodma = hwif->autodma;
 338 }
 339
 340 static ide_pci_device_t cs5530_chipset __devinitdata = {
 341         .name           = "CS5530",
 342         .init_chipset   = init_chipset_cs5530,
 343         .init_hwif      = init_hwif_cs5530,
 344         .channels       = 2,
 345         .autodma        = AUTODMA,
 346         .bootable       = ON_BOARD,
 347 };
 348
 349 static int __devinit cs5530_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 350 {
 351         return ide_setup_pci_device(dev, &cs5530_chipset);
 352 }
 353
 354 static struct pci_device_id cs5530_pci_tbl[] = {
 355         { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 356         { 0, },
 357 };
 358 MODULE_DEVICE_TABLE(pci, cs5530_pci_tbl);
 359
 360 static struct pci_driver driver = {
 361         .name           = "CS5530 IDE",
 362         .id_table       = cs5530_pci_tbl,
 363         .probe          = cs5530_init_one,
 364 };
 365
 366 static int __init cs5530_ide_init(void)
 367 {
 368         return ide_pci_register_driver(&driver);
 369 }
 370
 371 module_init(cs5530_ide_init);
 372
 373 MODULE_AUTHOR("Mark Lord");
 374 MODULE_DESCRIPTION("PCI driver module for Cyrix/NS 5530 IDE");
 375 MODULE_LICENSE("GPL");