2 * Driver for the SWIM3 (Super Woz Integrated Machine 3)
3 * floppy controller found on Power Macintoshes.
5 * Copyright (C) 1996 Paul Mackerras.
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License
9 * as published by the Free Software Foundation; either version
10 * 2 of the License, or (at your option) any later version.
19 #include <linux/stddef.h>
20 #include <linux/kernel.h>
21 #include <linux/sched.h>
22 #include <linux/timer.h>
23 #include <linux/delay.h>
25 #include <linux/ioctl.h>
26 #include <linux/blkdev.h>
27 #include <linux/interrupt.h>
28 #include <linux/module.h>
29 #include <linux/spinlock.h>
31 #include <asm/dbdma.h>
33 #include <asm/uaccess.h>
34 #include <asm/mediabay.h>
35 #include <asm/machdep.h>
36 #include <asm/pmac_feature.h>
38 static struct request_queue
*swim3_queue
;
39 static struct gendisk
*disks
[2];
40 static struct request
*fd_req
;
42 #define MAX_FLOPPIES 2
56 #define REG(x) unsigned char x; char x ## _pad[15];
59 * The names for these registers mostly represent speculation on my part.
60 * It will be interesting to see how close they are to the names Apple uses.
64 REG(timer
); /* counts down at 1MHz */
67 REG(select
); /* controls CA0, CA1, CA2 and LSTRB signals */
69 REG(control
); /* writing bits clears them */
70 REG(status
); /* writing bits sets them in control */
72 REG(nseek
); /* # tracks to seek */
73 REG(ctrack
); /* current track number */
74 REG(csect
); /* current sector number */
75 REG(gap3
); /* size of gap 3 in track format */
76 REG(sector
); /* sector # to read or write */
77 REG(nsect
); /* # sectors to read or write */
81 #define control_bic control
82 #define control_bis status
84 /* Bits in select register */
88 /* Bits in control register */
92 #define WRITE_SECTORS 0x10
93 #define DO_ACTION 0x08
94 #define DRIVE2_ENABLE 0x04
95 #define DRIVE_ENABLE 0x02
96 #define INTR_ENABLE 0x01
98 /* Bits in status register */
99 #define FIFO_1BYTE 0x80
100 #define FIFO_2BYTE 0x40
104 #define INTR_PENDING 0x02
105 #define MARK_BYTE 0x01
107 /* Bits in intr and intr_enable registers */
108 #define ERROR_INTR 0x20
109 #define DATA_CHANGED 0x10
110 #define TRANSFER_DONE 0x08
111 #define SEEN_SECTOR 0x04
112 #define SEEK_DONE 0x02
113 #define TIMER_DONE 0x01
115 /* Bits in error register */
116 #define ERR_DATA_CRC 0x80
117 #define ERR_ADDR_CRC 0x40
118 #define ERR_OVERRUN 0x04
119 #define ERR_UNDERRUN 0x01
121 /* Bits in setup register */
122 #define S_SW_RESET 0x80
123 #define S_GCR_WRITE 0x40
124 #define S_IBM_DRIVE 0x20
125 #define S_TEST_MODE 0x10
126 #define S_FCLK_DIV2 0x08
128 #define S_COPY_PROT 0x02
129 #define S_INV_WDATA 0x01
131 /* Select values for swim3_action */
132 #define SEEK_POSITIVE 0
133 #define SEEK_NEGATIVE 4
142 /* Select values for swim3_select and swim3_readbit */
146 #define RELAX 3 /* also eject in progress */
147 #define READ_DATA_0 4
148 #define TWOMEG_DRIVE 5
149 #define SINGLE_SIDED 6 /* drive or diskette is 4MB type? */
150 #define DRIVE_PRESENT 7
153 #define TRACK_ZERO 10
155 #define READ_DATA_1 12
157 #define SEEK_COMPLETE 14
158 #define ONEMEG_MEDIA 15
160 /* Definitions of values used in writing and formatting */
161 #define DATA_ESCAPE 0x99
162 #define GCR_SYNC_EXC 0x3f
163 #define GCR_SYNC_CONV 0x80
164 #define GCR_FIRST_MARK 0xd5
165 #define GCR_SECOND_MARK 0xaa
166 #define GCR_ADDR_MARK "\xd5\xaa\x00"
167 #define GCR_DATA_MARK "\xd5\xaa\x0b"
168 #define GCR_SLIP_BYTE "\x27\xaa"
169 #define GCR_SELF_SYNC "\x3f\xbf\x1e\x34\x3c\x3f"
171 #define DATA_99 "\x99\x99"
172 #define MFM_ADDR_MARK "\x99\xa1\x99\xa1\x99\xa1\x99\xfe"
173 #define MFM_INDEX_MARK "\x99\xc2\x99\xc2\x99\xc2\x99\xfc"
174 #define MFM_GAP_LEN 12
176 struct floppy_state
{
177 enum swim_state state
;
179 struct swim3 __iomem
*swim3
; /* hardware registers */
180 struct dbdma_regs __iomem
*dma
; /* DMA controller registers */
181 int swim3_intr
; /* interrupt number for SWIM3 */
182 int dma_intr
; /* interrupt number for DMA channel */
183 int cur_cyl
; /* cylinder head is on, or -1 */
184 int cur_sector
; /* last sector we saw go past */
185 int req_cyl
; /* the cylinder for the current r/w request */
186 int head
; /* head number ditto */
187 int req_sector
; /* sector number ditto */
188 int scount
; /* # sectors we're transferring at present */
191 int secpercyl
; /* disk geometry information */
194 int write_prot
; /* 1 if write-protected, 0 if not, -1 dunno */
195 struct dbdma_cmd
*dma_cmd
;
198 struct timer_list timeout
;
201 wait_queue_head_t wait
;
203 struct device_node
* media_bay
; /* NULL when not in bay */
204 char dbdma_cmd_space
[5 * sizeof(struct dbdma_cmd
)];
207 static struct floppy_state floppy_states
[MAX_FLOPPIES
];
208 static int floppy_count
= 0;
209 static DEFINE_SPINLOCK(swim3_lock
);
211 static unsigned short write_preamble
[] = {
212 0x4e4e, 0x4e4e, 0x4e4e, 0x4e4e, 0x4e4e, /* gap field */
213 0, 0, 0, 0, 0, 0, /* sync field */
214 0x99a1, 0x99a1, 0x99a1, 0x99fb, /* data address mark */
215 0x990f /* no escape for 512 bytes */
218 static unsigned short write_postamble
[] = {
219 0x9904, /* insert CRC */
221 0x9908, /* stop writing */
225 static void swim3_select(struct floppy_state
*fs
, int sel
);
226 static void swim3_action(struct floppy_state
*fs
, int action
);
227 static int swim3_readbit(struct floppy_state
*fs
, int bit
);
228 static void do_fd_request(struct request_queue
* q
);
229 static void start_request(struct floppy_state
*fs
);
230 static void set_timeout(struct floppy_state
*fs
, int nticks
,
231 void (*proc
)(unsigned long));
232 static void scan_track(struct floppy_state
*fs
);
233 static void seek_track(struct floppy_state
*fs
, int n
);
234 static void init_dma(struct dbdma_cmd
*cp
, int cmd
, void *buf
, int count
);
235 static void setup_transfer(struct floppy_state
*fs
);
236 static void act(struct floppy_state
*fs
);
237 static void scan_timeout(unsigned long data
);
238 static void seek_timeout(unsigned long data
);
239 static void settle_timeout(unsigned long data
);
240 static void xfer_timeout(unsigned long data
);
241 static irqreturn_t
swim3_interrupt(int irq
, void *dev_id
);
242 /*static void fd_dma_interrupt(int irq, void *dev_id);*/
243 static int grab_drive(struct floppy_state
*fs
, enum swim_state state
,
245 static void release_drive(struct floppy_state
*fs
);
246 static int fd_eject(struct floppy_state
*fs
);
247 static int floppy_ioctl(struct inode
*inode
, struct file
*filp
,
248 unsigned int cmd
, unsigned long param
);
249 static int floppy_open(struct inode
*inode
, struct file
*filp
);
250 static int floppy_release(struct inode
*inode
, struct file
*filp
);
251 static int floppy_check_change(struct gendisk
*disk
);
252 static int floppy_revalidate(struct gendisk
*disk
);
254 #ifndef CONFIG_PMAC_MEDIABAY
255 #define check_media_bay(which, what) 1
258 static void swim3_select(struct floppy_state
*fs
, int sel
)
260 struct swim3 __iomem
*sw
= fs
->swim3
;
262 out_8(&sw
->select
, RELAX
);
264 out_8(&sw
->control_bis
, SELECT
);
266 out_8(&sw
->control_bic
, SELECT
);
267 out_8(&sw
->select
, sel
& CA_MASK
);
270 static void swim3_action(struct floppy_state
*fs
, int action
)
272 struct swim3 __iomem
*sw
= fs
->swim3
;
274 swim3_select(fs
, action
);
276 out_8(&sw
->select
, sw
->select
| LSTRB
);
278 out_8(&sw
->select
, sw
->select
& ~LSTRB
);
282 static int swim3_readbit(struct floppy_state
*fs
, int bit
)
284 struct swim3 __iomem
*sw
= fs
->swim3
;
287 swim3_select(fs
, bit
);
289 stat
= in_8(&sw
->status
);
290 return (stat
& DATA
) == 0;
293 static void do_fd_request(struct request_queue
* q
)
296 for(i
=0;i
<floppy_count
;i
++)
298 #ifdef CONFIG_PMAC_MEDIABAY
299 if (floppy_states
[i
].media_bay
&&
300 check_media_bay(floppy_states
[i
].media_bay
, MB_FD
))
302 #endif /* CONFIG_PMAC_MEDIABAY */
303 start_request(&floppy_states
[i
]);
307 static void start_request(struct floppy_state
*fs
)
312 if (fs
->state
== idle
&& fs
->wanted
) {
313 fs
->state
= available
;
317 while (fs
->state
== idle
&& (req
= elv_next_request(swim3_queue
))) {
319 printk("do_fd_req: dev=%s cmd=%d sec=%ld nr_sec=%ld buf=%p\n",
320 req
->rq_disk
->disk_name
, req
->cmd
,
321 (long)req
->sector
, req
->nr_sectors
, req
->buffer
);
322 printk(" errors=%d current_nr_sectors=%ld\n",
323 req
->errors
, req
->current_nr_sectors
);
326 if (req
->sector
< 0 || req
->sector
>= fs
->total_secs
) {
330 if (req
->current_nr_sectors
== 0) {
339 if (rq_data_dir(req
) == WRITE
) {
340 if (fs
->write_prot
< 0)
341 fs
->write_prot
= swim3_readbit(fs
, WRITE_PROT
);
342 if (fs
->write_prot
) {
348 /* Do not remove the cast. req->sector is now a sector_t and
349 * can be 64 bits, but it will never go past 32 bits for this
350 * driver anyway, so we can safely cast it down and not have
351 * to do a 64/32 division
353 fs
->req_cyl
= ((long)req
->sector
) / fs
->secpercyl
;
354 x
= ((long)req
->sector
) % fs
->secpercyl
;
355 fs
->head
= x
/ fs
->secpertrack
;
356 fs
->req_sector
= x
% fs
->secpertrack
+ 1;
358 fs
->state
= do_transfer
;
365 static void set_timeout(struct floppy_state
*fs
, int nticks
,
366 void (*proc
)(unsigned long))
370 spin_lock_irqsave(&fs
->lock
, flags
);
371 if (fs
->timeout_pending
)
372 del_timer(&fs
->timeout
);
373 fs
->timeout
.expires
= jiffies
+ nticks
;
374 fs
->timeout
.function
= proc
;
375 fs
->timeout
.data
= (unsigned long) fs
;
376 add_timer(&fs
->timeout
);
377 fs
->timeout_pending
= 1;
378 spin_unlock_irqrestore(&fs
->lock
, flags
);
381 static inline void scan_track(struct floppy_state
*fs
)
383 struct swim3 __iomem
*sw
= fs
->swim3
;
385 swim3_select(fs
, READ_DATA_0
);
386 in_8(&sw
->intr
); /* clear SEEN_SECTOR bit */
388 out_8(&sw
->intr_enable
, SEEN_SECTOR
);
389 out_8(&sw
->control_bis
, DO_ACTION
);
390 /* enable intr when track found */
391 set_timeout(fs
, HZ
, scan_timeout
); /* enable timeout */
394 static inline void seek_track(struct floppy_state
*fs
, int n
)
396 struct swim3 __iomem
*sw
= fs
->swim3
;
399 swim3_action(fs
, SEEK_POSITIVE
);
402 swim3_action(fs
, SEEK_NEGATIVE
);
405 fs
->expect_cyl
= (fs
->cur_cyl
>= 0)? fs
->cur_cyl
+ n
: -1;
406 swim3_select(fs
, STEP
);
408 /* enable intr when seek finished */
409 out_8(&sw
->intr_enable
, SEEK_DONE
);
410 out_8(&sw
->control_bis
, DO_SEEK
);
411 set_timeout(fs
, 3*HZ
, seek_timeout
); /* enable timeout */
415 static inline void init_dma(struct dbdma_cmd
*cp
, int cmd
,
416 void *buf
, int count
)
418 st_le16(&cp
->req_count
, count
);
419 st_le16(&cp
->command
, cmd
);
420 st_le32(&cp
->phy_addr
, virt_to_bus(buf
));
424 static inline void setup_transfer(struct floppy_state
*fs
)
427 struct swim3 __iomem
*sw
= fs
->swim3
;
428 struct dbdma_cmd
*cp
= fs
->dma_cmd
;
429 struct dbdma_regs __iomem
*dr
= fs
->dma
;
431 if (fd_req
->current_nr_sectors
<= 0) {
432 printk(KERN_ERR
"swim3: transfer 0 sectors?\n");
435 if (rq_data_dir(fd_req
) == WRITE
)
438 n
= fs
->secpertrack
- fs
->req_sector
+ 1;
439 if (n
> fd_req
->current_nr_sectors
)
440 n
= fd_req
->current_nr_sectors
;
443 swim3_select(fs
, fs
->head
? READ_DATA_1
: READ_DATA_0
);
444 out_8(&sw
->sector
, fs
->req_sector
);
445 out_8(&sw
->nsect
, n
);
447 out_le32(&dr
->cmdptr
, virt_to_bus(cp
));
448 if (rq_data_dir(fd_req
) == WRITE
) {
449 /* Set up 3 dma commands: write preamble, data, postamble */
450 init_dma(cp
, OUTPUT_MORE
, write_preamble
, sizeof(write_preamble
));
452 init_dma(cp
, OUTPUT_MORE
, fd_req
->buffer
, 512);
454 init_dma(cp
, OUTPUT_LAST
, write_postamble
, sizeof(write_postamble
));
456 init_dma(cp
, INPUT_LAST
, fd_req
->buffer
, n
* 512);
459 out_le16(&cp
->command
, DBDMA_STOP
);
460 out_8(&sw
->control_bic
, DO_ACTION
| WRITE_SECTORS
);
462 out_8(&sw
->control_bic
, DO_ACTION
| WRITE_SECTORS
);
463 if (rq_data_dir(fd_req
) == WRITE
)
464 out_8(&sw
->control_bis
, WRITE_SECTORS
);
466 out_le32(&dr
->control
, (RUN
<< 16) | RUN
);
467 /* enable intr when transfer complete */
468 out_8(&sw
->intr_enable
, TRANSFER_DONE
);
469 out_8(&sw
->control_bis
, DO_ACTION
);
470 set_timeout(fs
, 2*HZ
, xfer_timeout
); /* enable timeout */
473 static void act(struct floppy_state
*fs
)
478 return; /* XXX shouldn't get here */
481 if (swim3_readbit(fs
, TRACK_ZERO
)) {
483 if (fs
->req_cyl
== 0)
484 fs
->state
= do_transfer
;
493 if (fs
->cur_cyl
< 0) {
495 fs
->state
= locating
;
498 if (fs
->req_cyl
== fs
->cur_cyl
) {
499 printk("whoops, seeking 0\n");
500 fs
->state
= do_transfer
;
503 seek_track(fs
, fs
->req_cyl
- fs
->cur_cyl
);
507 /* check for SEEK_COMPLETE after 30ms */
508 fs
->settle_time
= (HZ
+ 32) / 33;
509 set_timeout(fs
, fs
->settle_time
, settle_timeout
);
513 if (fs
->cur_cyl
!= fs
->req_cyl
) {
514 if (fs
->retries
> 5) {
515 end_request(fd_req
, 0);
530 printk(KERN_ERR
"swim3: unknown state %d\n", fs
->state
);
536 static void scan_timeout(unsigned long data
)
538 struct floppy_state
*fs
= (struct floppy_state
*) data
;
539 struct swim3 __iomem
*sw
= fs
->swim3
;
541 fs
->timeout_pending
= 0;
542 out_8(&sw
->control_bic
, DO_ACTION
| WRITE_SECTORS
);
543 out_8(&sw
->select
, RELAX
);
544 out_8(&sw
->intr_enable
, 0);
546 if (fs
->retries
> 5) {
547 end_request(fd_req
, 0);
556 static void seek_timeout(unsigned long data
)
558 struct floppy_state
*fs
= (struct floppy_state
*) data
;
559 struct swim3 __iomem
*sw
= fs
->swim3
;
561 fs
->timeout_pending
= 0;
562 out_8(&sw
->control_bic
, DO_SEEK
);
563 out_8(&sw
->select
, RELAX
);
564 out_8(&sw
->intr_enable
, 0);
565 printk(KERN_ERR
"swim3: seek timeout\n");
566 end_request(fd_req
, 0);
571 static void settle_timeout(unsigned long data
)
573 struct floppy_state
*fs
= (struct floppy_state
*) data
;
574 struct swim3 __iomem
*sw
= fs
->swim3
;
576 fs
->timeout_pending
= 0;
577 if (swim3_readbit(fs
, SEEK_COMPLETE
)) {
578 out_8(&sw
->select
, RELAX
);
579 fs
->state
= locating
;
583 out_8(&sw
->select
, RELAX
);
584 if (fs
->settle_time
< 2*HZ
) {
586 set_timeout(fs
, 1, settle_timeout
);
589 printk(KERN_ERR
"swim3: seek settle timeout\n");
590 end_request(fd_req
, 0);
595 static void xfer_timeout(unsigned long data
)
597 struct floppy_state
*fs
= (struct floppy_state
*) data
;
598 struct swim3 __iomem
*sw
= fs
->swim3
;
599 struct dbdma_regs __iomem
*dr
= fs
->dma
;
600 struct dbdma_cmd
*cp
= fs
->dma_cmd
;
604 fs
->timeout_pending
= 0;
605 out_le32(&dr
->control
, RUN
<< 16);
606 /* We must wait a bit for dbdma to stop */
607 for (n
= 0; (in_le32(&dr
->status
) & ACTIVE
) && n
< 1000; n
++)
609 out_8(&sw
->intr_enable
, 0);
610 out_8(&sw
->control_bic
, WRITE_SECTORS
| DO_ACTION
);
611 out_8(&sw
->select
, RELAX
);
612 if (rq_data_dir(fd_req
) == WRITE
)
614 if (ld_le16(&cp
->xfer_status
) != 0)
615 s
= fs
->scount
- ((ld_le16(&cp
->res_count
) + 511) >> 9);
619 fd_req
->current_nr_sectors
-= s
;
620 printk(KERN_ERR
"swim3: timeout %sing sector %ld\n",
621 (rq_data_dir(fd_req
)==WRITE
? "writ": "read"), (long)fd_req
->sector
);
622 end_request(fd_req
, 0);
627 static irqreturn_t
swim3_interrupt(int irq
, void *dev_id
)
629 struct floppy_state
*fs
= (struct floppy_state
*) dev_id
;
630 struct swim3 __iomem
*sw
= fs
->swim3
;
633 struct dbdma_regs __iomem
*dr
;
634 struct dbdma_cmd
*cp
;
636 intr
= in_8(&sw
->intr
);
637 err
= (intr
& ERROR_INTR
)? in_8(&sw
->error
): 0;
638 if ((intr
& ERROR_INTR
) && fs
->state
!= do_transfer
)
639 printk(KERN_ERR
"swim3_interrupt, state=%d, dir=%x, intr=%x, err=%x\n",
640 fs
->state
, rq_data_dir(fd_req
), intr
, err
);
643 if (intr
& SEEN_SECTOR
) {
644 out_8(&sw
->control_bic
, DO_ACTION
| WRITE_SECTORS
);
645 out_8(&sw
->select
, RELAX
);
646 out_8(&sw
->intr_enable
, 0);
647 del_timer(&fs
->timeout
);
648 fs
->timeout_pending
= 0;
649 if (sw
->ctrack
== 0xff) {
650 printk(KERN_ERR
"swim3: seen sector but cyl=ff?\n");
652 if (fs
->retries
> 5) {
653 end_request(fd_req
, 0);
662 fs
->cur_cyl
= sw
->ctrack
;
663 fs
->cur_sector
= sw
->csect
;
664 if (fs
->expect_cyl
!= -1 && fs
->expect_cyl
!= fs
->cur_cyl
)
665 printk(KERN_ERR
"swim3: expected cyl %d, got %d\n",
666 fs
->expect_cyl
, fs
->cur_cyl
);
667 fs
->state
= do_transfer
;
673 if (sw
->nseek
== 0) {
674 out_8(&sw
->control_bic
, DO_SEEK
);
675 out_8(&sw
->select
, RELAX
);
676 out_8(&sw
->intr_enable
, 0);
677 del_timer(&fs
->timeout
);
678 fs
->timeout_pending
= 0;
679 if (fs
->state
== seeking
)
681 fs
->state
= settling
;
686 out_8(&sw
->intr_enable
, 0);
687 del_timer(&fs
->timeout
);
688 fs
->timeout_pending
= 0;
692 if ((intr
& (ERROR_INTR
| TRANSFER_DONE
)) == 0)
694 out_8(&sw
->intr_enable
, 0);
695 out_8(&sw
->control_bic
, WRITE_SECTORS
| DO_ACTION
);
696 out_8(&sw
->select
, RELAX
);
697 del_timer(&fs
->timeout
);
698 fs
->timeout_pending
= 0;
701 if (rq_data_dir(fd_req
) == WRITE
)
704 * Check that the main data transfer has finished.
705 * On writing, the swim3 sometimes doesn't use
706 * up all the bytes of the postamble, so we can still
707 * see DMA active here. That doesn't matter as long
708 * as all the sector data has been transferred.
710 if ((intr
& ERROR_INTR
) == 0 && cp
->xfer_status
== 0) {
711 /* wait a little while for DMA to complete */
712 for (n
= 0; n
< 100; ++n
) {
713 if (cp
->xfer_status
!= 0)
720 out_le32(&dr
->control
, (RUN
| PAUSE
) << 16);
721 stat
= ld_le16(&cp
->xfer_status
);
722 resid
= ld_le16(&cp
->res_count
);
723 if (intr
& ERROR_INTR
) {
724 n
= fs
->scount
- 1 - resid
/ 512;
727 fd_req
->current_nr_sectors
-= n
;
728 fd_req
->buffer
+= n
* 512;
731 if (fs
->retries
< 5) {
735 printk("swim3: error %sing block %ld (err=%x)\n",
736 rq_data_dir(fd_req
) == WRITE
? "writ": "read",
737 (long)fd_req
->sector
, err
);
738 end_request(fd_req
, 0);
742 if ((stat
& ACTIVE
) == 0 || resid
!= 0) {
743 /* musta been an error */
744 printk(KERN_ERR
"swim3: fd dma: stat=%x resid=%d\n", stat
, resid
);
745 printk(KERN_ERR
" state=%d, dir=%x, intr=%x, err=%x\n",
746 fs
->state
, rq_data_dir(fd_req
), intr
, err
);
747 end_request(fd_req
, 0);
752 fd_req
->sector
+= fs
->scount
;
753 fd_req
->current_nr_sectors
-= fs
->scount
;
754 fd_req
->buffer
+= fs
->scount
* 512;
755 if (fd_req
->current_nr_sectors
<= 0) {
756 end_request(fd_req
, 1);
759 fs
->req_sector
+= fs
->scount
;
760 if (fs
->req_sector
> fs
->secpertrack
) {
761 fs
->req_sector
-= fs
->secpertrack
;
762 if (++fs
->head
> 1) {
770 if (fs
->state
== idle
)
774 printk(KERN_ERR
"swim3: don't know what to do in state %d\n", fs
->state
);
780 static void fd_dma_interrupt(int irq, void *dev_id)
785 static int grab_drive(struct floppy_state
*fs
, enum swim_state state
,
790 spin_lock_irqsave(&fs
->lock
, flags
);
791 if (fs
->state
!= idle
) {
793 while (fs
->state
!= available
) {
794 if (interruptible
&& signal_pending(current
)) {
796 spin_unlock_irqrestore(&fs
->lock
, flags
);
799 interruptible_sleep_on(&fs
->wait
);
804 spin_unlock_irqrestore(&fs
->lock
, flags
);
808 static void release_drive(struct floppy_state
*fs
)
812 spin_lock_irqsave(&fs
->lock
, flags
);
815 spin_unlock_irqrestore(&fs
->lock
, flags
);
818 static int fd_eject(struct floppy_state
*fs
)
822 err
= grab_drive(fs
, ejecting
, 1);
825 swim3_action(fs
, EJECT
);
826 for (n
= 20; n
> 0; --n
) {
827 if (signal_pending(current
)) {
831 swim3_select(fs
, RELAX
);
832 schedule_timeout_interruptible(1);
833 if (swim3_readbit(fs
, DISK_IN
) == 0)
836 swim3_select(fs
, RELAX
);
843 static struct floppy_struct floppy_type
=
844 { 2880,18,2,80,0,0x1B,0x00,0xCF,0x6C,NULL
}; /* 7 1.44MB 3.5" */
846 static int floppy_ioctl(struct inode
*inode
, struct file
*filp
,
847 unsigned int cmd
, unsigned long param
)
849 struct floppy_state
*fs
= inode
->i_bdev
->bd_disk
->private_data
;
852 if ((cmd
& 0x80) && !capable(CAP_SYS_ADMIN
))
855 #ifdef CONFIG_PMAC_MEDIABAY
856 if (fs
->media_bay
&& check_media_bay(fs
->media_bay
, MB_FD
))
862 if (fs
->ref_count
!= 1)
867 if (copy_to_user((void __user
*) param
, &floppy_type
,
868 sizeof(struct floppy_struct
)))
875 static int floppy_open(struct inode
*inode
, struct file
*filp
)
877 struct floppy_state
*fs
= inode
->i_bdev
->bd_disk
->private_data
;
878 struct swim3 __iomem
*sw
= fs
->swim3
;
881 if (fs
->ref_count
== 0) {
882 #ifdef CONFIG_PMAC_MEDIABAY
883 if (fs
->media_bay
&& check_media_bay(fs
->media_bay
, MB_FD
))
886 out_8(&sw
->setup
, S_IBM_DRIVE
| S_FCLK_DIV2
);
887 out_8(&sw
->control_bic
, 0xff);
888 out_8(&sw
->mode
, 0x95);
890 out_8(&sw
->intr_enable
, 0);
891 out_8(&sw
->control_bis
, DRIVE_ENABLE
| INTR_ENABLE
);
892 swim3_action(fs
, MOTOR_ON
);
895 for (n
= 0; n
< 2 * HZ
; ++n
) {
896 if (n
>= HZ
/30 && swim3_readbit(fs
, SEEK_COMPLETE
))
898 if (signal_pending(current
)) {
902 swim3_select(fs
, RELAX
);
903 schedule_timeout_interruptible(1);
905 if (err
== 0 && (swim3_readbit(fs
, SEEK_COMPLETE
) == 0
906 || swim3_readbit(fs
, DISK_IN
) == 0))
908 swim3_action(fs
, SETMFM
);
909 swim3_select(fs
, RELAX
);
911 } else if (fs
->ref_count
== -1 || filp
->f_flags
& O_EXCL
)
914 if (err
== 0 && (filp
->f_flags
& O_NDELAY
) == 0
915 && (filp
->f_mode
& 3)) {
916 check_disk_change(inode
->i_bdev
);
921 if (err
== 0 && (filp
->f_mode
& 2)) {
922 if (fs
->write_prot
< 0)
923 fs
->write_prot
= swim3_readbit(fs
, WRITE_PROT
);
929 if (fs
->ref_count
== 0) {
930 swim3_action(fs
, MOTOR_OFF
);
931 out_8(&sw
->control_bic
, DRIVE_ENABLE
| INTR_ENABLE
);
932 swim3_select(fs
, RELAX
);
937 if (filp
->f_flags
& O_EXCL
)
945 static int floppy_release(struct inode
*inode
, struct file
*filp
)
947 struct floppy_state
*fs
= inode
->i_bdev
->bd_disk
->private_data
;
948 struct swim3 __iomem
*sw
= fs
->swim3
;
949 if (fs
->ref_count
> 0 && --fs
->ref_count
== 0) {
950 swim3_action(fs
, MOTOR_OFF
);
951 out_8(&sw
->control_bic
, 0xff);
952 swim3_select(fs
, RELAX
);
957 static int floppy_check_change(struct gendisk
*disk
)
959 struct floppy_state
*fs
= disk
->private_data
;
963 static int floppy_revalidate(struct gendisk
*disk
)
965 struct floppy_state
*fs
= disk
->private_data
;
966 struct swim3 __iomem
*sw
;
969 #ifdef CONFIG_PMAC_MEDIABAY
970 if (fs
->media_bay
&& check_media_bay(fs
->media_bay
, MB_FD
))
975 grab_drive(fs
, revalidating
, 0);
976 out_8(&sw
->intr_enable
, 0);
977 out_8(&sw
->control_bis
, DRIVE_ENABLE
);
978 swim3_action(fs
, MOTOR_ON
); /* necessary? */
982 for (n
= HZ
; n
> 0; --n
) {
983 if (swim3_readbit(fs
, SEEK_COMPLETE
))
985 if (signal_pending(current
))
987 swim3_select(fs
, RELAX
);
988 schedule_timeout_interruptible(1);
990 ret
= swim3_readbit(fs
, SEEK_COMPLETE
) == 0
991 || swim3_readbit(fs
, DISK_IN
) == 0;
993 swim3_action(fs
, MOTOR_OFF
);
996 swim3_action(fs
, SETMFM
);
998 swim3_select(fs
, RELAX
);
1004 static struct block_device_operations floppy_fops
= {
1005 .open
= floppy_open
,
1006 .release
= floppy_release
,
1007 .ioctl
= floppy_ioctl
,
1008 .media_changed
= floppy_check_change
,
1009 .revalidate_disk
= floppy_revalidate
,
1012 static int swim3_add_device(struct macio_dev
*mdev
, int index
)
1014 struct device_node
*swim
= mdev
->ofdev
.node
;
1015 struct device_node
*mediabay
;
1016 struct floppy_state
*fs
= &floppy_states
[index
];
1019 /* Check & Request resources */
1020 if (macio_resource_count(mdev
) < 2) {
1021 printk(KERN_WARNING
"ifd%d: no address for %s\n",
1022 index
, swim
->full_name
);
1025 if (macio_irq_count(mdev
) < 2) {
1026 printk(KERN_WARNING
"fd%d: no intrs for device %s\n",
1027 index
, swim
->full_name
);
1029 if (macio_request_resource(mdev
, 0, "swim3 (mmio)")) {
1030 printk(KERN_ERR
"fd%d: can't request mmio resource for %s\n",
1031 index
, swim
->full_name
);
1034 if (macio_request_resource(mdev
, 1, "swim3 (dma)")) {
1035 printk(KERN_ERR
"fd%d: can't request dma resource for %s\n",
1036 index
, swim
->full_name
);
1037 macio_release_resource(mdev
, 0);
1040 dev_set_drvdata(&mdev
->ofdev
.dev
, fs
);
1042 mediabay
= (strcasecmp(swim
->parent
->type
, "media-bay") == 0) ?
1043 swim
->parent
: NULL
;
1044 if (mediabay
== NULL
)
1045 pmac_call_feature(PMAC_FTR_SWIM3_ENABLE
, swim
, 0, 1);
1047 memset(fs
, 0, sizeof(*fs
));
1048 spin_lock_init(&fs
->lock
);
1050 fs
->swim3
= (struct swim3 __iomem
*)
1051 ioremap(macio_resource_start(mdev
, 0), 0x200);
1052 if (fs
->swim3
== NULL
) {
1053 printk("fd%d: couldn't map registers for %s\n",
1054 index
, swim
->full_name
);
1058 fs
->dma
= (struct dbdma_regs __iomem
*)
1059 ioremap(macio_resource_start(mdev
, 1), 0x200);
1060 if (fs
->dma
== NULL
) {
1061 printk("fd%d: couldn't map DMA for %s\n",
1062 index
, swim
->full_name
);
1067 fs
->swim3_intr
= macio_irq(mdev
, 0);
1068 fs
->dma_intr
= macio_irq(mdev
, 1);;
1070 fs
->cur_sector
= -1;
1072 fs
->secpertrack
= 18;
1073 fs
->total_secs
= 2880;
1074 fs
->media_bay
= mediabay
;
1075 init_waitqueue_head(&fs
->wait
);
1077 fs
->dma_cmd
= (struct dbdma_cmd
*) DBDMA_ALIGN(fs
->dbdma_cmd_space
);
1078 memset(fs
->dma_cmd
, 0, 2 * sizeof(struct dbdma_cmd
));
1079 st_le16(&fs
->dma_cmd
[1].command
, DBDMA_STOP
);
1081 if (request_irq(fs
->swim3_intr
, swim3_interrupt
, 0, "SWIM3", fs
)) {
1082 printk(KERN_ERR
"fd%d: couldn't request irq %d for %s\n",
1083 index
, fs
->swim3_intr
, swim
->full_name
);
1084 pmac_call_feature(PMAC_FTR_SWIM3_ENABLE
, swim
, 0, 0);
1089 if (request_irq(fs->dma_intr, fd_dma_interrupt, 0, "SWIM3-dma", fs)) {
1090 printk(KERN_ERR "Couldn't get irq %d for SWIM3 DMA",
1096 init_timer(&fs
->timeout
);
1098 printk(KERN_INFO
"fd%d: SWIM3 floppy controller %s\n", floppy_count
,
1099 mediabay
? "in media bay" : "");
1108 macio_release_resource(mdev
, 0);
1109 macio_release_resource(mdev
, 1);
1114 static int __devinit
swim3_attach(struct macio_dev
*mdev
, const struct of_device_id
*match
)
1117 struct gendisk
*disk
;
1120 rc
= swim3_add_device(mdev
, floppy_count
);
1124 /* Now create the queue if not there yet */
1125 if (swim3_queue
== NULL
) {
1126 /* If we failed, there isn't much we can do as the driver is still
1127 * too dumb to remove the device, just bail out
1129 if (register_blkdev(FLOPPY_MAJOR
, "fd"))
1131 swim3_queue
= blk_init_queue(do_fd_request
, &swim3_lock
);
1132 if (swim3_queue
== NULL
) {
1133 unregister_blkdev(FLOPPY_MAJOR
, "fd");
1138 /* Now register that disk. Same comment about failure handling */
1140 disk
= disks
[i
] = alloc_disk(1);
1144 disk
->major
= FLOPPY_MAJOR
;
1145 disk
->first_minor
= i
;
1146 disk
->fops
= &floppy_fops
;
1147 disk
->private_data
= &floppy_states
[i
];
1148 disk
->queue
= swim3_queue
;
1149 disk
->flags
|= GENHD_FL_REMOVABLE
;
1150 sprintf(disk
->disk_name
, "fd%d", i
);
1151 set_capacity(disk
, 2880);
1157 static struct of_device_id swim3_match
[] =
1163 .compatible
= "ohare-swim3"
1166 .compatible
= "swim3"
1170 static struct macio_driver swim3_driver
=
1173 .match_table
= swim3_match
,
1174 .probe
= swim3_attach
,
1176 .suspend
= swim3_suspend
,
1177 .resume
= swim3_resume
,
1182 int swim3_init(void)
1184 macio_register_driver(&swim3_driver
);
1188 module_init(swim3_init
)
1190 MODULE_LICENSE("GPL");
1191 MODULE_AUTHOR("Paul Mackerras");
1192 MODULE_ALIAS_BLOCKDEV_MAJOR(FLOPPY_MAJOR
);