2 * QLogic Fibre Channel HBA Driver
3 * Copyright (c) 2003-2005 QLogic Corporation
5 * See LICENSE.qla2xxx for copyright and licensing details.
9 #include <linux/delay.h>
10 #include <scsi/scsi_transport_fc.h>
13 qla2x00_mbx_sem_timeout(unsigned long data
)
15 struct semaphore
*sem_ptr
= (struct semaphore
*)data
;
17 DEBUG11(printk("qla2x00_sem_timeout: entered.\n");)
19 if (sem_ptr
!= NULL
) {
23 DEBUG11(printk("qla2x00_mbx_sem_timeout: exiting.\n");)
27 * qla2x00_mailbox_command
28 * Issue mailbox command and waits for completion.
31 * ha = adapter block pointer.
32 * mcp = driver internal mbx struct pointer.
35 * mb[MAX_MAILBOX_REGISTER_COUNT] = returned mailbox data.
38 * 0 : QLA_SUCCESS = cmd performed success
39 * 1 : QLA_FUNCTION_FAILED (error encountered)
40 * 6 : QLA_FUNCTION_TIMEOUT (timeout condition encountered)
46 qla2x00_mailbox_command(scsi_qla_host_t
*ha
, mbx_cmd_t
*mcp
)
49 unsigned long flags
= 0;
50 device_reg_t __iomem
*reg
= ha
->iobase
;
51 struct timer_list tmp_intr_timer
;
53 uint8_t io_lock_on
= ha
->flags
.init_done
;
56 uint16_t __iomem
*optr
;
59 unsigned long mbx_flags
= 0;
60 unsigned long wait_time
;
63 abort_active
= test_bit(ABORT_ISP_ACTIVE
, &ha
->dpc_flags
);
65 DEBUG11(printk("%s(%ld): entered.\n", __func__
, ha
->host_no
);)
68 * Wait for active mailbox commands to finish by waiting at most tov
69 * seconds. This is to serialize actual issuing of mailbox cmds during
73 if (qla2x00_down_timeout(&ha
->mbx_cmd_sem
, mcp
->tov
* HZ
)) {
74 /* Timeout occurred. Return error. */
75 DEBUG2_3_11(printk("%s(%ld): cmd access timeout. "
76 "Exiting.\n", __func__
, ha
->host_no
);)
77 return QLA_FUNCTION_TIMEOUT
;
81 ha
->flags
.mbox_busy
= 1;
82 /* Save mailbox command for debug */
85 /* Try to get mailbox register access */
87 spin_lock_irqsave(&ha
->mbx_reg_lock
, mbx_flags
);
89 DEBUG11(printk("scsi(%ld): prepare to issue mbox cmd=0x%x.\n",
90 ha
->host_no
, mcp
->mb
[0]);)
92 spin_lock_irqsave(&ha
->hardware_lock
, flags
);
94 /* Load mailbox registers. */
95 if (IS_QLA24XX(ha
) || IS_QLA25XX(ha
))
96 optr
= (uint16_t __iomem
*)®
->isp24
.mailbox0
;
98 optr
= (uint16_t __iomem
*)MAILBOX_REG(ha
, ®
->isp
, 0);
101 command
= mcp
->mb
[0];
102 mboxes
= mcp
->out_mb
;
104 for (cnt
= 0; cnt
< ha
->mbx_count
; cnt
++) {
105 if (IS_QLA2200(ha
) && cnt
== 8)
107 (uint16_t __iomem
*)MAILBOX_REG(ha
, ®
->isp
, 8);
109 WRT_REG_WORD(optr
, *iptr
);
116 #if defined(QL_DEBUG_LEVEL_1)
117 printk("%s(%ld): Loaded MBX registers (displayed in bytes) = \n",
118 __func__
, ha
->host_no
);
119 qla2x00_dump_buffer((uint8_t *)mcp
->mb
, 16);
121 qla2x00_dump_buffer(((uint8_t *)mcp
->mb
+ 0x10), 16);
123 qla2x00_dump_buffer(((uint8_t *)mcp
->mb
+ 0x20), 8);
125 printk("%s(%ld): I/O address = %p.\n", __func__
, ha
->host_no
, optr
);
126 qla2x00_dump_regs(ha
);
129 /* Issue set host interrupt command to send cmd out. */
130 ha
->flags
.mbox_int
= 0;
131 clear_bit(MBX_INTERRUPT
, &ha
->mbx_cmd_flags
);
133 /* Unlock mbx registers and wait for interrupt */
134 DEBUG11(printk("%s(%ld): going to unlock irq & waiting for interrupt. "
135 "jiffies=%lx.\n", __func__
, ha
->host_no
, jiffies
);)
137 /* Wait for mbx cmd completion until timeout */
139 if (!abort_active
&& io_lock_on
) {
140 /* sleep on completion semaphore */
141 DEBUG11(printk("%s(%ld): INTERRUPT MODE. Initializing timer.\n",
142 __func__
, ha
->host_no
);)
144 init_timer(&tmp_intr_timer
);
145 tmp_intr_timer
.data
= (unsigned long)&ha
->mbx_intr_sem
;
146 tmp_intr_timer
.expires
= jiffies
+ mcp
->tov
* HZ
;
147 tmp_intr_timer
.function
=
148 (void (*)(unsigned long))qla2x00_mbx_sem_timeout
;
150 DEBUG11(printk("%s(%ld): Adding timer.\n", __func__
,
152 add_timer(&tmp_intr_timer
);
154 DEBUG11(printk("%s(%ld): going to unlock & sleep. "
155 "time=0x%lx.\n", __func__
, ha
->host_no
, jiffies
);)
157 set_bit(MBX_INTR_WAIT
, &ha
->mbx_cmd_flags
);
159 if (IS_QLA24XX(ha
) || IS_QLA25XX(ha
))
160 WRT_REG_DWORD(®
->isp24
.hccr
, HCCRX_SET_HOST_INT
);
162 WRT_REG_WORD(®
->isp
.hccr
, HCCR_SET_HOST_INT
);
163 spin_unlock_irqrestore(&ha
->hardware_lock
, flags
);
166 spin_unlock_irqrestore(&ha
->mbx_reg_lock
, mbx_flags
);
168 /* Wait for either the timer to expire
169 * or the mbox completion interrupt
171 down(&ha
->mbx_intr_sem
);
173 DEBUG11(printk("%s(%ld): waking up. time=0x%lx\n", __func__
,
174 ha
->host_no
, jiffies
);)
175 clear_bit(MBX_INTR_WAIT
, &ha
->mbx_cmd_flags
);
177 /* delete the timer */
178 del_timer(&tmp_intr_timer
);
180 DEBUG3_11(printk("%s(%ld): cmd=%x POLLING MODE.\n", __func__
,
181 ha
->host_no
, command
);)
183 if (IS_QLA24XX(ha
) || IS_QLA25XX(ha
))
184 WRT_REG_DWORD(®
->isp24
.hccr
, HCCRX_SET_HOST_INT
);
186 WRT_REG_WORD(®
->isp
.hccr
, HCCR_SET_HOST_INT
);
187 spin_unlock_irqrestore(&ha
->hardware_lock
, flags
);
189 spin_unlock_irqrestore(&ha
->mbx_reg_lock
, mbx_flags
);
191 wait_time
= jiffies
+ mcp
->tov
* HZ
; /* wait at most tov secs */
192 while (!ha
->flags
.mbox_int
) {
193 if (time_after(jiffies
, wait_time
))
196 /* Check for pending interrupts. */
199 if (command
!= MBC_LOAD_RISC_RAM_EXTENDED
&&
206 spin_lock_irqsave(&ha
->mbx_reg_lock
, mbx_flags
);
208 /* Check whether we timed out */
209 if (ha
->flags
.mbox_int
) {
212 DEBUG3_11(printk("%s(%ld): cmd %x completed.\n", __func__
,
213 ha
->host_no
, command
);)
215 /* Got interrupt. Clear the flag. */
216 ha
->flags
.mbox_int
= 0;
217 clear_bit(MBX_INTERRUPT
, &ha
->mbx_cmd_flags
);
219 if (ha
->mailbox_out
[0] != MBS_COMMAND_COMPLETE
)
220 rval
= QLA_FUNCTION_FAILED
;
222 /* Load return mailbox registers. */
224 iptr
= (uint16_t *)&ha
->mailbox_out
[0];
226 for (cnt
= 0; cnt
< ha
->mbx_count
; cnt
++) {
236 #if defined(QL_DEBUG_LEVEL_2) || defined(QL_DEBUG_LEVEL_3) || \
237 defined(QL_DEBUG_LEVEL_11)
241 if (IS_QLA24XX(ha
) || IS_QLA25XX(ha
)) {
242 mb0
= RD_REG_WORD(®
->isp24
.mailbox0
);
243 ictrl
= RD_REG_DWORD(®
->isp24
.ictrl
);
245 mb0
= RD_MAILBOX_REG(ha
, ®
->isp
, 0);
246 ictrl
= RD_REG_WORD(®
->isp
.ictrl
);
248 printk("%s(%ld): **** MB Command Timeout for cmd %x ****\n",
249 __func__
, ha
->host_no
, command
);
250 printk("%s(%ld): icontrol=%x jiffies=%lx\n", __func__
,
251 ha
->host_no
, ictrl
, jiffies
);
252 printk("%s(%ld): *** mailbox[0] = 0x%x ***\n", __func__
,
254 qla2x00_dump_regs(ha
);
257 rval
= QLA_FUNCTION_TIMEOUT
;
261 spin_unlock_irqrestore(&ha
->mbx_reg_lock
, mbx_flags
);
263 ha
->flags
.mbox_busy
= 0;
269 DEBUG11(printk("%s(%ld): checking for additional resp "
270 "interrupt.\n", __func__
, ha
->host_no
);)
272 /* polling mode for non isp_abort commands. */
276 if (rval
== QLA_FUNCTION_TIMEOUT
&&
277 mcp
->mb
[0] != MBC_GEN_SYSTEM_ERROR
) {
278 if (!io_lock_on
|| (mcp
->flags
& IOCTL_CMD
)) {
279 /* not in dpc. schedule it for dpc to take over. */
280 DEBUG(printk("%s(%ld): timeout schedule "
281 "isp_abort_needed.\n", __func__
, ha
->host_no
);)
282 DEBUG2_3_11(printk("%s(%ld): timeout schedule "
283 "isp_abort_needed.\n", __func__
, ha
->host_no
);)
284 qla_printk(KERN_WARNING
, ha
,
285 "Mailbox command timeout occured. Scheduling ISP "
287 set_bit(ISP_ABORT_NEEDED
, &ha
->dpc_flags
);
288 if (ha
->dpc_wait
&& !ha
->dpc_active
)
291 } else if (!abort_active
) {
292 /* call abort directly since we are in the DPC thread */
293 DEBUG(printk("%s(%ld): timeout calling abort_isp\n",
294 __func__
, ha
->host_no
);)
295 DEBUG2_3_11(printk("%s(%ld): timeout calling "
296 "abort_isp\n", __func__
, ha
->host_no
);)
297 qla_printk(KERN_WARNING
, ha
,
298 "Mailbox command timeout occured. Issuing ISP "
301 set_bit(ABORT_ISP_ACTIVE
, &ha
->dpc_flags
);
302 clear_bit(ISP_ABORT_NEEDED
, &ha
->dpc_flags
);
303 if (qla2x00_abort_isp(ha
)) {
304 /* Failed. retry later. */
305 set_bit(ISP_ABORT_NEEDED
, &ha
->dpc_flags
);
307 clear_bit(ABORT_ISP_ACTIVE
, &ha
->dpc_flags
);
308 DEBUG(printk("%s(%ld): finished abort_isp\n", __func__
,
310 DEBUG2_3_11(printk("%s(%ld): finished abort_isp\n",
311 __func__
, ha
->host_no
);)
315 /* Allow next mbx cmd to come in. */
317 up(&ha
->mbx_cmd_sem
);
320 DEBUG2_3_11(printk("%s(%ld): **** FAILED. mbx0=%x, mbx1=%x, "
321 "mbx2=%x, cmd=%x ****\n", __func__
, ha
->host_no
,
322 mcp
->mb
[0], mcp
->mb
[1], mcp
->mb
[2], command
);)
324 DEBUG11(printk("%s(%ld): done.\n", __func__
, ha
->host_no
);)
331 qla2x00_load_ram(scsi_qla_host_t
*ha
, dma_addr_t req_dma
, uint32_t risc_addr
,
332 uint32_t risc_code_size
)
336 mbx_cmd_t
*mcp
= &mc
;
338 DEBUG11(printk("%s(%ld): entered.\n", __func__
, ha
->host_no
));
340 if (MSW(risc_addr
) || IS_QLA24XX(ha
) || IS_QLA25XX(ha
)) {
341 mcp
->mb
[0] = MBC_LOAD_RISC_RAM_EXTENDED
;
342 mcp
->mb
[8] = MSW(risc_addr
);
343 mcp
->out_mb
= MBX_8
|MBX_0
;
345 mcp
->mb
[0] = MBC_LOAD_RISC_RAM
;
348 mcp
->mb
[1] = LSW(risc_addr
);
349 mcp
->mb
[2] = MSW(req_dma
);
350 mcp
->mb
[3] = LSW(req_dma
);
351 mcp
->mb
[6] = MSW(MSD(req_dma
));
352 mcp
->mb
[7] = LSW(MSD(req_dma
));
353 mcp
->out_mb
|= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
;
354 if (IS_QLA24XX(ha
) || IS_QLA25XX(ha
)) {
355 mcp
->mb
[4] = MSW(risc_code_size
);
356 mcp
->mb
[5] = LSW(risc_code_size
);
357 mcp
->out_mb
|= MBX_5
|MBX_4
;
359 mcp
->mb
[4] = LSW(risc_code_size
);
360 mcp
->out_mb
|= MBX_4
;
366 rval
= qla2x00_mailbox_command(ha
, mcp
);
368 if (rval
!= QLA_SUCCESS
) {
369 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x.\n", __func__
,
370 ha
->host_no
, rval
, mcp
->mb
[0]));
372 DEBUG11(printk("%s(%ld): done.\n", __func__
, ha
->host_no
));
380 * Start adapter firmware.
383 * ha = adapter block pointer.
384 * TARGET_QUEUE_LOCK must be released.
385 * ADAPTER_STATE_LOCK must be released.
388 * qla2x00 local function return status code.
394 qla2x00_execute_fw(scsi_qla_host_t
*ha
, uint32_t risc_addr
)
398 mbx_cmd_t
*mcp
= &mc
;
400 DEBUG11(printk("%s(%ld): entered.\n", __func__
, ha
->host_no
);)
402 mcp
->mb
[0] = MBC_EXECUTE_FIRMWARE
;
405 if (IS_QLA24XX(ha
) || IS_QLA25XX(ha
)) {
406 mcp
->mb
[1] = MSW(risc_addr
);
407 mcp
->mb
[2] = LSW(risc_addr
);
409 mcp
->out_mb
|= MBX_3
|MBX_2
|MBX_1
;
412 mcp
->mb
[1] = LSW(risc_addr
);
413 mcp
->out_mb
|= MBX_1
;
414 if (IS_QLA2322(ha
) || IS_QLA6322(ha
)) {
416 mcp
->out_mb
|= MBX_2
;
422 rval
= qla2x00_mailbox_command(ha
, mcp
);
424 if (rval
!= QLA_SUCCESS
) {
425 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x.\n", __func__
,
426 ha
->host_no
, rval
, mcp
->mb
[0]));
428 if (IS_QLA24XX(ha
) || IS_QLA25XX(ha
)) {
429 DEBUG11(printk("%s(%ld): done exchanges=%x.\n",
430 __func__
, ha
->host_no
, mcp
->mb
[1]);)
432 DEBUG11(printk("%s(%ld): done.\n", __func__
,
441 * qla2x00_get_fw_version
442 * Get firmware version.
445 * ha: adapter state pointer.
446 * major: pointer for major number.
447 * minor: pointer for minor number.
448 * subminor: pointer for subminor number.
451 * qla2x00 local function return status code.
457 qla2x00_get_fw_version(scsi_qla_host_t
*ha
, uint16_t *major
, uint16_t *minor
,
458 uint16_t *subminor
, uint16_t *attributes
, uint32_t *memory
)
462 mbx_cmd_t
*mcp
= &mc
;
464 DEBUG11(printk("%s(%ld): entered.\n", __func__
, ha
->host_no
));
466 mcp
->mb
[0] = MBC_GET_FIRMWARE_VERSION
;
468 mcp
->in_mb
= MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
471 rval
= qla2x00_mailbox_command(ha
, mcp
);
473 /* Return mailbox data. */
476 *subminor
= mcp
->mb
[3];
477 *attributes
= mcp
->mb
[6];
478 if (IS_QLA2100(ha
) || IS_QLA2200(ha
))
479 *memory
= 0x1FFFF; /* Defaults to 128KB. */
481 *memory
= (mcp
->mb
[5] << 16) | mcp
->mb
[4];
483 if (rval
!= QLA_SUCCESS
) {
485 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
489 DEBUG11(printk("%s(%ld): done.\n", __func__
, ha
->host_no
));
494 * qla2x00_get_fw_options
495 * Set firmware options.
498 * ha = adapter block pointer.
499 * fwopt = pointer for firmware options.
502 * qla2x00 local function return status code.
508 qla2x00_get_fw_options(scsi_qla_host_t
*ha
, uint16_t *fwopts
)
512 mbx_cmd_t
*mcp
= &mc
;
514 DEBUG11(printk("%s(%ld): entered.\n", __func__
, ha
->host_no
));
516 mcp
->mb
[0] = MBC_GET_FIRMWARE_OPTION
;
518 mcp
->in_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
521 rval
= qla2x00_mailbox_command(ha
, mcp
);
523 if (rval
!= QLA_SUCCESS
) {
525 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
528 fwopts
[0] = mcp
->mb
[0];
529 fwopts
[1] = mcp
->mb
[1];
530 fwopts
[2] = mcp
->mb
[2];
531 fwopts
[3] = mcp
->mb
[3];
533 DEBUG11(printk("%s(%ld): done.\n", __func__
, ha
->host_no
));
541 * qla2x00_set_fw_options
542 * Set firmware options.
545 * ha = adapter block pointer.
546 * fwopt = pointer for firmware options.
549 * qla2x00 local function return status code.
555 qla2x00_set_fw_options(scsi_qla_host_t
*ha
, uint16_t *fwopts
)
559 mbx_cmd_t
*mcp
= &mc
;
561 DEBUG11(printk("%s(%ld): entered.\n", __func__
, ha
->host_no
));
563 mcp
->mb
[0] = MBC_SET_FIRMWARE_OPTION
;
564 mcp
->mb
[1] = fwopts
[1];
565 mcp
->mb
[2] = fwopts
[2];
566 mcp
->mb
[3] = fwopts
[3];
567 mcp
->out_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
569 if (IS_QLA24XX(ha
) || IS_QLA25XX(ha
)) {
572 mcp
->mb
[10] = fwopts
[10];
573 mcp
->mb
[11] = fwopts
[11];
574 mcp
->mb
[12] = 0; /* Undocumented, but used */
575 mcp
->out_mb
|= MBX_12
|MBX_11
|MBX_10
;
579 rval
= qla2x00_mailbox_command(ha
, mcp
);
581 fwopts
[0] = mcp
->mb
[0];
583 if (rval
!= QLA_SUCCESS
) {
585 DEBUG2_3_11(printk("%s(%ld): failed=%x (%x/%x).\n", __func__
,
586 ha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
589 DEBUG11(printk("%s(%ld): done.\n", __func__
, ha
->host_no
));
596 * qla2x00_mbx_reg_test
597 * Mailbox register wrap test.
600 * ha = adapter block pointer.
601 * TARGET_QUEUE_LOCK must be released.
602 * ADAPTER_STATE_LOCK must be released.
605 * qla2x00 local function return status code.
611 qla2x00_mbx_reg_test(scsi_qla_host_t
*ha
)
615 mbx_cmd_t
*mcp
= &mc
;
617 DEBUG11(printk("qla2x00_mbx_reg_test(%ld): entered.\n", ha
->host_no
);)
619 mcp
->mb
[0] = MBC_MAILBOX_REGISTER_TEST
;
627 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
628 mcp
->in_mb
= MBX_7
|MBX_6
|MBX_5
|MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
631 rval
= qla2x00_mailbox_command(ha
, mcp
);
633 if (rval
== QLA_SUCCESS
) {
634 if (mcp
->mb
[1] != 0xAAAA || mcp
->mb
[2] != 0x5555 ||
635 mcp
->mb
[3] != 0xAA55 || mcp
->mb
[4] != 0x55AA)
636 rval
= QLA_FUNCTION_FAILED
;
637 if (mcp
->mb
[5] != 0xA5A5 || mcp
->mb
[6] != 0x5A5A ||
638 mcp
->mb
[7] != 0x2525)
639 rval
= QLA_FUNCTION_FAILED
;
642 if (rval
!= QLA_SUCCESS
) {
644 DEBUG2_3_11(printk("qla2x00_mbx_reg_test(%ld): failed=%x.\n",
648 DEBUG11(printk("qla2x00_mbx_reg_test(%ld): done.\n",
656 * qla2x00_verify_checksum
657 * Verify firmware checksum.
660 * ha = adapter block pointer.
661 * TARGET_QUEUE_LOCK must be released.
662 * ADAPTER_STATE_LOCK must be released.
665 * qla2x00 local function return status code.
671 qla2x00_verify_checksum(scsi_qla_host_t
*ha
, uint32_t risc_addr
)
675 mbx_cmd_t
*mcp
= &mc
;
677 DEBUG11(printk("%s(%ld): entered.\n", __func__
, ha
->host_no
);)
679 mcp
->mb
[0] = MBC_VERIFY_CHECKSUM
;
682 if (IS_QLA24XX(ha
) || IS_QLA25XX(ha
)) {
683 mcp
->mb
[1] = MSW(risc_addr
);
684 mcp
->mb
[2] = LSW(risc_addr
);
685 mcp
->out_mb
|= MBX_2
|MBX_1
;
686 mcp
->in_mb
|= MBX_2
|MBX_1
;
688 mcp
->mb
[1] = LSW(risc_addr
);
689 mcp
->out_mb
|= MBX_1
;
695 rval
= qla2x00_mailbox_command(ha
, mcp
);
697 if (rval
!= QLA_SUCCESS
) {
698 DEBUG2_3_11(printk("%s(%ld): failed=%x chk sum=%x.\n", __func__
,
699 ha
->host_no
, rval
, (IS_QLA24XX(ha
) || IS_QLA25XX(ha
) ?
700 (mcp
->mb
[2] << 16) | mcp
->mb
[1]: mcp
->mb
[1]));)
702 DEBUG11(printk("%s(%ld): done.\n", __func__
, ha
->host_no
);)
710 * Issue IOCB using mailbox command
713 * ha = adapter state pointer.
714 * buffer = buffer pointer.
715 * phys_addr = physical address of buffer.
716 * size = size of buffer.
717 * TARGET_QUEUE_LOCK must be released.
718 * ADAPTER_STATE_LOCK must be released.
721 * qla2x00 local function return status code.
727 qla2x00_issue_iocb(scsi_qla_host_t
*ha
, void* buffer
, dma_addr_t phys_addr
,
732 mbx_cmd_t
*mcp
= &mc
;
734 mcp
->mb
[0] = MBC_IOCB_COMMAND_A64
;
736 mcp
->mb
[2] = MSW(phys_addr
);
737 mcp
->mb
[3] = LSW(phys_addr
);
738 mcp
->mb
[6] = MSW(MSD(phys_addr
));
739 mcp
->mb
[7] = LSW(MSD(phys_addr
));
740 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
741 mcp
->in_mb
= MBX_2
|MBX_0
;
744 rval
= qla2x00_mailbox_command(ha
, mcp
);
746 if (rval
!= QLA_SUCCESS
) {
748 DEBUG(printk("qla2x00_issue_iocb(%ld): failed rval 0x%x\n",
750 DEBUG2(printk("qla2x00_issue_iocb(%ld): failed rval 0x%x\n",
753 sts_entry_t
*sts_entry
= (sts_entry_t
*) buffer
;
755 /* Mask reserved bits. */
756 sts_entry
->entry_status
&=
757 IS_QLA24XX(ha
) || IS_QLA25XX(ha
) ? RF_MASK_24XX
:RF_MASK
;
764 * qla2x00_abort_command
765 * Abort command aborts a specified IOCB.
768 * ha = adapter block pointer.
769 * sp = SB structure pointer.
772 * qla2x00 local function return status code.
778 qla2x00_abort_command(scsi_qla_host_t
*ha
, srb_t
*sp
)
780 unsigned long flags
= 0;
785 mbx_cmd_t
*mcp
= &mc
;
787 DEBUG11(printk("qla2x00_abort_command(%ld): entered.\n", ha
->host_no
);)
791 spin_lock_irqsave(&ha
->hardware_lock
, flags
);
792 for (handle
= 1; handle
< MAX_OUTSTANDING_COMMANDS
; handle
++) {
793 if (ha
->outstanding_cmds
[handle
] == sp
)
796 spin_unlock_irqrestore(&ha
->hardware_lock
, flags
);
798 if (handle
== MAX_OUTSTANDING_COMMANDS
) {
799 /* command not found */
800 return QLA_FUNCTION_FAILED
;
803 mcp
->mb
[0] = MBC_ABORT_COMMAND
;
804 if (HAS_EXTENDED_IDS(ha
))
805 mcp
->mb
[1] = fcport
->loop_id
;
807 mcp
->mb
[1] = fcport
->loop_id
<< 8;
808 mcp
->mb
[2] = (uint16_t)handle
;
809 mcp
->mb
[3] = (uint16_t)(handle
>> 16);
810 mcp
->mb
[6] = (uint16_t)sp
->cmd
->device
->lun
;
811 mcp
->out_mb
= MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
815 rval
= qla2x00_mailbox_command(ha
, mcp
);
817 if (rval
!= QLA_SUCCESS
) {
818 DEBUG2_3_11(printk("qla2x00_abort_command(%ld): failed=%x.\n",
821 sp
->flags
|= SRB_ABORT_PENDING
;
822 DEBUG11(printk("qla2x00_abort_command(%ld): done.\n",
831 * qla2x00_abort_target
832 * Issue abort target mailbox command.
835 * ha = adapter block pointer.
838 * qla2x00 local function return status code.
844 qla2x00_abort_target(fc_port_t
*fcport
)
848 mbx_cmd_t
*mcp
= &mc
;
854 DEBUG11(printk("%s(%ld): entered.\n", __func__
, fcport
->ha
->host_no
);)
857 mcp
->mb
[0] = MBC_ABORT_TARGET
;
858 mcp
->out_mb
= MBX_2
|MBX_1
|MBX_0
;
859 if (HAS_EXTENDED_IDS(ha
)) {
860 mcp
->mb
[1] = fcport
->loop_id
;
862 mcp
->out_mb
|= MBX_10
;
864 mcp
->mb
[1] = fcport
->loop_id
<< 8;
866 mcp
->mb
[2] = ha
->loop_reset_delay
;
871 rval
= qla2x00_mailbox_command(ha
, mcp
);
873 /* Issue marker command. */
874 ha
->marker_needed
= 1;
876 if (rval
!= QLA_SUCCESS
) {
877 DEBUG2_3_11(printk("qla2x00_abort_target(%ld): failed=%x.\n",
881 DEBUG11(printk("qla2x00_abort_target(%ld): done.\n",
890 * qla2x00_get_adapter_id
891 * Get adapter ID and topology.
894 * ha = adapter block pointer.
895 * id = pointer for loop ID.
896 * al_pa = pointer for AL_PA.
897 * area = pointer for area.
898 * domain = pointer for domain.
899 * top = pointer for topology.
900 * TARGET_QUEUE_LOCK must be released.
901 * ADAPTER_STATE_LOCK must be released.
904 * qla2x00 local function return status code.
910 qla2x00_get_adapter_id(scsi_qla_host_t
*ha
, uint16_t *id
, uint8_t *al_pa
,
911 uint8_t *area
, uint8_t *domain
, uint16_t *top
)
915 mbx_cmd_t
*mcp
= &mc
;
917 DEBUG11(printk("qla2x00_get_adapter_id(%ld): entered.\n",
920 mcp
->mb
[0] = MBC_GET_ADAPTER_LOOP_ID
;
922 mcp
->in_mb
= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
925 rval
= qla2x00_mailbox_command(ha
, mcp
);
926 if (mcp
->mb
[0] == MBS_COMMAND_ERROR
)
927 rval
= QLA_COMMAND_ERROR
;
931 *al_pa
= LSB(mcp
->mb
[2]);
932 *area
= MSB(mcp
->mb
[2]);
933 *domain
= LSB(mcp
->mb
[3]);
936 if (rval
!= QLA_SUCCESS
) {
938 DEBUG2_3_11(printk("qla2x00_get_adapter_id(%ld): failed=%x.\n",
942 DEBUG11(printk("qla2x00_get_adapter_id(%ld): done.\n",
950 * qla2x00_get_retry_cnt
951 * Get current firmware login retry count and delay.
954 * ha = adapter block pointer.
955 * retry_cnt = pointer to login retry count.
956 * tov = pointer to login timeout value.
959 * qla2x00 local function return status code.
965 qla2x00_get_retry_cnt(scsi_qla_host_t
*ha
, uint8_t *retry_cnt
, uint8_t *tov
,
971 mbx_cmd_t
*mcp
= &mc
;
973 DEBUG11(printk("qla2x00_get_retry_cnt(%ld): entered.\n",
976 mcp
->mb
[0] = MBC_GET_RETRY_COUNT
;
978 mcp
->in_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
981 rval
= qla2x00_mailbox_command(ha
, mcp
);
983 if (rval
!= QLA_SUCCESS
) {
985 DEBUG2_3_11(printk("qla2x00_get_retry_cnt(%ld): failed = %x.\n",
986 ha
->host_no
, mcp
->mb
[0]);)
988 /* Convert returned data and check our values. */
989 *r_a_tov
= mcp
->mb
[3] / 2;
990 ratov
= (mcp
->mb
[3]/2) / 10; /* mb[3] value is in 100ms */
991 if (mcp
->mb
[1] * ratov
> (*retry_cnt
) * (*tov
)) {
992 /* Update to the larger values */
993 *retry_cnt
= (uint8_t)mcp
->mb
[1];
997 DEBUG11(printk("qla2x00_get_retry_cnt(%ld): done. mb3=%d "
998 "ratov=%d.\n", ha
->host_no
, mcp
->mb
[3], ratov
);)
1005 * qla2x00_init_firmware
1006 * Initialize adapter firmware.
1009 * ha = adapter block pointer.
1010 * dptr = Initialization control block pointer.
1011 * size = size of initialization control block.
1012 * TARGET_QUEUE_LOCK must be released.
1013 * ADAPTER_STATE_LOCK must be released.
1016 * qla2x00 local function return status code.
1022 qla2x00_init_firmware(scsi_qla_host_t
*ha
, uint16_t size
)
1026 mbx_cmd_t
*mcp
= &mc
;
1028 DEBUG11(printk("qla2x00_init_firmware(%ld): entered.\n",
1031 mcp
->mb
[0] = MBC_INITIALIZE_FIRMWARE
;
1032 mcp
->mb
[2] = MSW(ha
->init_cb_dma
);
1033 mcp
->mb
[3] = LSW(ha
->init_cb_dma
);
1036 mcp
->mb
[6] = MSW(MSD(ha
->init_cb_dma
));
1037 mcp
->mb
[7] = LSW(MSD(ha
->init_cb_dma
));
1038 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_0
;
1039 mcp
->in_mb
= MBX_5
|MBX_4
|MBX_0
;
1040 mcp
->buf_size
= size
;
1041 mcp
->flags
= MBX_DMA_OUT
;
1043 rval
= qla2x00_mailbox_command(ha
, mcp
);
1045 if (rval
!= QLA_SUCCESS
) {
1047 DEBUG2_3_11(printk("qla2x00_init_firmware(%ld): failed=%x "
1049 ha
->host_no
, rval
, mcp
->mb
[0]);)
1052 DEBUG11(printk("qla2x00_init_firmware(%ld): done.\n",
1060 * qla2x00_get_port_database
1061 * Issue normal/enhanced get port database mailbox command
1062 * and copy device name as necessary.
1065 * ha = adapter state pointer.
1066 * dev = structure pointer.
1067 * opt = enhanced cmd option byte.
1070 * qla2x00 local function return status code.
1076 qla2x00_get_port_database(scsi_qla_host_t
*ha
, fc_port_t
*fcport
, uint8_t opt
)
1080 mbx_cmd_t
*mcp
= &mc
;
1081 port_database_t
*pd
;
1082 struct port_database_24xx
*pd24
;
1085 DEBUG11(printk("%s(%ld): entered.\n", __func__
, ha
->host_no
);)
1088 pd
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &pd_dma
);
1090 DEBUG2_3(printk("%s(%ld): failed to allocate Port Database "
1091 "structure.\n", __func__
, ha
->host_no
));
1092 return QLA_MEMORY_ALLOC_FAILED
;
1094 memset(pd
, 0, max(PORT_DATABASE_SIZE
, PORT_DATABASE_24XX_SIZE
));
1096 mcp
->mb
[0] = MBC_GET_PORT_DATABASE
;
1097 if (opt
!= 0 && !IS_QLA24XX(ha
) && !IS_QLA25XX(ha
))
1098 mcp
->mb
[0] = MBC_ENHANCED_GET_PORT_DATABASE
;
1099 mcp
->mb
[2] = MSW(pd_dma
);
1100 mcp
->mb
[3] = LSW(pd_dma
);
1101 mcp
->mb
[6] = MSW(MSD(pd_dma
));
1102 mcp
->mb
[7] = LSW(MSD(pd_dma
));
1103 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_0
;
1105 if (IS_QLA24XX(ha
) || IS_QLA25XX(ha
)) {
1106 mcp
->mb
[1] = fcport
->loop_id
;
1108 mcp
->out_mb
|= MBX_10
|MBX_1
;
1109 mcp
->in_mb
|= MBX_1
;
1110 } else if (HAS_EXTENDED_IDS(ha
)) {
1111 mcp
->mb
[1] = fcport
->loop_id
;
1113 mcp
->out_mb
|= MBX_10
|MBX_1
;
1115 mcp
->mb
[1] = fcport
->loop_id
<< 8 | opt
;
1116 mcp
->out_mb
|= MBX_1
;
1118 mcp
->buf_size
= (IS_QLA24XX(ha
) || IS_QLA25XX(ha
) ?
1119 PORT_DATABASE_24XX_SIZE
: PORT_DATABASE_SIZE
);
1120 mcp
->flags
= MBX_DMA_IN
;
1121 mcp
->tov
= (ha
->login_timeout
* 2) + (ha
->login_timeout
/ 2);
1122 rval
= qla2x00_mailbox_command(ha
, mcp
);
1123 if (rval
!= QLA_SUCCESS
)
1126 if (IS_QLA24XX(ha
) || IS_QLA25XX(ha
)) {
1127 pd24
= (struct port_database_24xx
*) pd
;
1129 /* Check for logged in state. */
1130 if (pd24
->current_login_state
!= PDS_PRLI_COMPLETE
&&
1131 pd24
->last_login_state
!= PDS_PRLI_COMPLETE
) {
1132 DEBUG2(printk("%s(%ld): Unable to verify "
1133 "login-state (%x/%x) for loop_id %x\n",
1134 __func__
, ha
->host_no
,
1135 pd24
->current_login_state
,
1136 pd24
->last_login_state
, fcport
->loop_id
));
1137 rval
= QLA_FUNCTION_FAILED
;
1141 /* Names are little-endian. */
1142 memcpy(fcport
->node_name
, pd24
->node_name
, WWN_SIZE
);
1143 memcpy(fcport
->port_name
, pd24
->port_name
, WWN_SIZE
);
1145 /* Get port_id of device. */
1146 fcport
->d_id
.b
.domain
= pd24
->port_id
[0];
1147 fcport
->d_id
.b
.area
= pd24
->port_id
[1];
1148 fcport
->d_id
.b
.al_pa
= pd24
->port_id
[2];
1149 fcport
->d_id
.b
.rsvd_1
= 0;
1151 /* If not target must be initiator or unknown type. */
1152 if ((pd24
->prli_svc_param_word_3
[0] & BIT_4
) == 0)
1153 fcport
->port_type
= FCT_INITIATOR
;
1155 fcport
->port_type
= FCT_TARGET
;
1157 /* Check for logged in state. */
1158 if (pd
->master_state
!= PD_STATE_PORT_LOGGED_IN
&&
1159 pd
->slave_state
!= PD_STATE_PORT_LOGGED_IN
) {
1160 rval
= QLA_FUNCTION_FAILED
;
1164 /* Names are little-endian. */
1165 memcpy(fcport
->node_name
, pd
->node_name
, WWN_SIZE
);
1166 memcpy(fcport
->port_name
, pd
->port_name
, WWN_SIZE
);
1168 /* Get port_id of device. */
1169 fcport
->d_id
.b
.domain
= pd
->port_id
[0];
1170 fcport
->d_id
.b
.area
= pd
->port_id
[3];
1171 fcport
->d_id
.b
.al_pa
= pd
->port_id
[2];
1172 fcport
->d_id
.b
.rsvd_1
= 0;
1174 /* Check for device require authentication. */
1175 pd
->common_features
& BIT_5
? (fcport
->flags
|= FCF_AUTH_REQ
) :
1176 (fcport
->flags
&= ~FCF_AUTH_REQ
);
1178 /* If not target must be initiator or unknown type. */
1179 if ((pd
->prli_svc_param_word_3
[0] & BIT_4
) == 0)
1180 fcport
->port_type
= FCT_INITIATOR
;
1182 fcport
->port_type
= FCT_TARGET
;
1184 /* Passback COS information. */
1185 fcport
->supported_classes
= (pd
->options
& BIT_4
) ?
1186 FC_COS_CLASS2
: FC_COS_CLASS3
;
1190 dma_pool_free(ha
->s_dma_pool
, pd
, pd_dma
);
1192 if (rval
!= QLA_SUCCESS
) {
1193 DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n",
1194 __func__
, ha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]));
1196 DEBUG11(printk("%s(%ld): done.\n", __func__
, ha
->host_no
));
1203 * qla2x00_get_firmware_state
1204 * Get adapter firmware state.
1207 * ha = adapter block pointer.
1208 * dptr = pointer for firmware state.
1209 * TARGET_QUEUE_LOCK must be released.
1210 * ADAPTER_STATE_LOCK must be released.
1213 * qla2x00 local function return status code.
1219 qla2x00_get_firmware_state(scsi_qla_host_t
*ha
, uint16_t *dptr
)
1223 mbx_cmd_t
*mcp
= &mc
;
1225 DEBUG11(printk("qla2x00_get_firmware_state(%ld): entered.\n",
1228 mcp
->mb
[0] = MBC_GET_FIRMWARE_STATE
;
1229 mcp
->out_mb
= MBX_0
;
1230 mcp
->in_mb
= MBX_2
|MBX_1
|MBX_0
;
1233 rval
= qla2x00_mailbox_command(ha
, mcp
);
1235 /* Return firmware state. */
1238 if (rval
!= QLA_SUCCESS
) {
1240 DEBUG2_3_11(printk("qla2x00_get_firmware_state(%ld): "
1241 "failed=%x.\n", ha
->host_no
, rval
);)
1244 DEBUG11(printk("qla2x00_get_firmware_state(%ld): done.\n",
1252 * qla2x00_get_port_name
1253 * Issue get port name mailbox command.
1254 * Returned name is in big endian format.
1257 * ha = adapter block pointer.
1258 * loop_id = loop ID of device.
1259 * name = pointer for name.
1260 * TARGET_QUEUE_LOCK must be released.
1261 * ADAPTER_STATE_LOCK must be released.
1264 * qla2x00 local function return status code.
1270 qla2x00_get_port_name(scsi_qla_host_t
*ha
, uint16_t loop_id
, uint8_t *name
,
1275 mbx_cmd_t
*mcp
= &mc
;
1277 DEBUG11(printk("qla2x00_get_port_name(%ld): entered.\n",
1280 mcp
->mb
[0] = MBC_GET_PORT_NAME
;
1281 mcp
->out_mb
= MBX_1
|MBX_0
;
1282 if (HAS_EXTENDED_IDS(ha
)) {
1283 mcp
->mb
[1] = loop_id
;
1285 mcp
->out_mb
|= MBX_10
;
1287 mcp
->mb
[1] = loop_id
<< 8 | opt
;
1290 mcp
->in_mb
= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1293 rval
= qla2x00_mailbox_command(ha
, mcp
);
1295 if (rval
!= QLA_SUCCESS
) {
1297 DEBUG2_3_11(printk("qla2x00_get_port_name(%ld): failed=%x.\n",
1298 ha
->host_no
, rval
);)
1301 /* This function returns name in big endian. */
1302 name
[0] = LSB(mcp
->mb
[2]);
1303 name
[1] = MSB(mcp
->mb
[2]);
1304 name
[2] = LSB(mcp
->mb
[3]);
1305 name
[3] = MSB(mcp
->mb
[3]);
1306 name
[4] = LSB(mcp
->mb
[6]);
1307 name
[5] = MSB(mcp
->mb
[6]);
1308 name
[6] = LSB(mcp
->mb
[7]);
1309 name
[7] = MSB(mcp
->mb
[7]);
1312 DEBUG11(printk("qla2x00_get_port_name(%ld): done.\n",
1321 * Issue LIP reset mailbox command.
1324 * ha = adapter block pointer.
1325 * TARGET_QUEUE_LOCK must be released.
1326 * ADAPTER_STATE_LOCK must be released.
1329 * qla2x00 local function return status code.
1335 qla2x00_lip_reset(scsi_qla_host_t
*ha
)
1339 mbx_cmd_t
*mcp
= &mc
;
1341 DEBUG11(printk("%s(%ld): entered.\n", __func__
, ha
->host_no
);)
1343 if (IS_QLA24XX(ha
) || IS_QLA25XX(ha
)) {
1344 mcp
->mb
[0] = MBC_LIP_FULL_LOGIN
;
1348 mcp
->out_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1350 mcp
->mb
[0] = MBC_LIP_RESET
;
1351 mcp
->out_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1352 if (HAS_EXTENDED_IDS(ha
)) {
1353 mcp
->mb
[1] = 0x00ff;
1355 mcp
->out_mb
|= MBX_10
;
1357 mcp
->mb
[1] = 0xff00;
1359 mcp
->mb
[2] = ha
->loop_reset_delay
;
1365 rval
= qla2x00_mailbox_command(ha
, mcp
);
1367 if (rval
!= QLA_SUCCESS
) {
1369 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n",
1370 __func__
, ha
->host_no
, rval
);)
1373 DEBUG11(printk("%s(%ld): done.\n", __func__
, ha
->host_no
);)
1384 * ha = adapter block pointer.
1385 * sns = pointer for command.
1386 * cmd_size = command size.
1387 * buf_size = response/command size.
1388 * TARGET_QUEUE_LOCK must be released.
1389 * ADAPTER_STATE_LOCK must be released.
1392 * qla2x00 local function return status code.
1398 qla2x00_send_sns(scsi_qla_host_t
*ha
, dma_addr_t sns_phys_address
,
1399 uint16_t cmd_size
, size_t buf_size
)
1403 mbx_cmd_t
*mcp
= &mc
;
1405 DEBUG11(printk("qla2x00_send_sns(%ld): entered.\n",
1408 DEBUG11(printk("qla2x00_send_sns: retry cnt=%d ratov=%d total "
1409 "tov=%d.\n", ha
->retry_count
, ha
->login_timeout
, mcp
->tov
);)
1411 mcp
->mb
[0] = MBC_SEND_SNS_COMMAND
;
1412 mcp
->mb
[1] = cmd_size
;
1413 mcp
->mb
[2] = MSW(sns_phys_address
);
1414 mcp
->mb
[3] = LSW(sns_phys_address
);
1415 mcp
->mb
[6] = MSW(MSD(sns_phys_address
));
1416 mcp
->mb
[7] = LSW(MSD(sns_phys_address
));
1417 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1418 mcp
->in_mb
= MBX_0
|MBX_1
;
1419 mcp
->buf_size
= buf_size
;
1420 mcp
->flags
= MBX_DMA_OUT
|MBX_DMA_IN
;
1421 mcp
->tov
= (ha
->login_timeout
* 2) + (ha
->login_timeout
/ 2);
1422 rval
= qla2x00_mailbox_command(ha
, mcp
);
1424 if (rval
!= QLA_SUCCESS
) {
1426 DEBUG(printk("qla2x00_send_sns(%ld): failed=%x mb[0]=%x "
1427 "mb[1]=%x.\n", ha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]);)
1428 DEBUG2_3_11(printk("qla2x00_send_sns(%ld): failed=%x mb[0]=%x "
1429 "mb[1]=%x.\n", ha
->host_no
, rval
, mcp
->mb
[0], mcp
->mb
[1]);)
1432 DEBUG11(printk("qla2x00_send_sns(%ld): done.\n", ha
->host_no
);)
1439 qla24xx_login_fabric(scsi_qla_host_t
*ha
, uint16_t loop_id
, uint8_t domain
,
1440 uint8_t area
, uint8_t al_pa
, uint16_t *mb
, uint8_t opt
)
1444 struct logio_entry_24xx
*lg
;
1448 DEBUG11(printk("%s(%ld): entered.\n", __func__
, ha
->host_no
);)
1450 lg
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &lg_dma
);
1452 DEBUG2_3(printk("%s(%ld): failed to allocate Login IOCB.\n",
1453 __func__
, ha
->host_no
));
1454 return QLA_MEMORY_ALLOC_FAILED
;
1456 memset(lg
, 0, sizeof(struct logio_entry_24xx
));
1458 lg
->entry_type
= LOGINOUT_PORT_IOCB_TYPE
;
1459 lg
->entry_count
= 1;
1460 lg
->nport_handle
= cpu_to_le16(loop_id
);
1461 lg
->control_flags
= __constant_cpu_to_le16(LCF_COMMAND_PLOGI
);
1463 lg
->control_flags
|= __constant_cpu_to_le16(LCF_COND_PLOGI
);
1464 lg
->port_id
[0] = al_pa
;
1465 lg
->port_id
[1] = area
;
1466 lg
->port_id
[2] = domain
;
1467 rval
= qla2x00_issue_iocb(ha
, lg
, lg_dma
, 0);
1468 if (rval
!= QLA_SUCCESS
) {
1469 DEBUG2_3_11(printk("%s(%ld): failed to issue Login IOCB "
1470 "(%x).\n", __func__
, ha
->host_no
, rval
);)
1471 } else if (lg
->entry_status
!= 0) {
1472 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
1473 "-- error status (%x).\n", __func__
, ha
->host_no
,
1475 rval
= QLA_FUNCTION_FAILED
;
1476 } else if (lg
->comp_status
!= __constant_cpu_to_le16(CS_COMPLETE
)) {
1477 iop
[0] = le32_to_cpu(lg
->io_parameter
[0]);
1478 iop
[1] = le32_to_cpu(lg
->io_parameter
[1]);
1480 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
1481 "-- completion status (%x) ioparam=%x/%x.\n", __func__
,
1482 ha
->host_no
, le16_to_cpu(lg
->comp_status
), iop
[0],
1486 case LSC_SCODE_PORTID_USED
:
1487 mb
[0] = MBS_PORT_ID_USED
;
1488 mb
[1] = LSW(iop
[1]);
1490 case LSC_SCODE_NPORT_USED
:
1491 mb
[0] = MBS_LOOP_ID_USED
;
1493 case LSC_SCODE_NOLINK
:
1494 case LSC_SCODE_NOIOCB
:
1495 case LSC_SCODE_NOXCB
:
1496 case LSC_SCODE_CMD_FAILED
:
1497 case LSC_SCODE_NOFABRIC
:
1498 case LSC_SCODE_FW_NOT_READY
:
1499 case LSC_SCODE_NOT_LOGGED_IN
:
1500 case LSC_SCODE_NOPCB
:
1501 case LSC_SCODE_ELS_REJECT
:
1502 case LSC_SCODE_CMD_PARAM_ERR
:
1503 case LSC_SCODE_NONPORT
:
1504 case LSC_SCODE_LOGGED_IN
:
1505 case LSC_SCODE_NOFLOGI_ACC
:
1507 mb
[0] = MBS_COMMAND_ERROR
;
1511 DEBUG11(printk("%s(%ld): done.\n", __func__
, ha
->host_no
);)
1513 iop
[0] = le32_to_cpu(lg
->io_parameter
[0]);
1515 mb
[0] = MBS_COMMAND_COMPLETE
;
1517 if (iop
[0] & BIT_4
) {
1523 /* Passback COS information. */
1525 if (lg
->io_parameter
[7] || lg
->io_parameter
[8])
1526 mb
[10] |= BIT_0
; /* Class 2. */
1527 if (lg
->io_parameter
[9] || lg
->io_parameter
[10])
1528 mb
[10] |= BIT_1
; /* Class 3. */
1531 dma_pool_free(ha
->s_dma_pool
, lg
, lg_dma
);
1537 * qla2x00_login_fabric
1538 * Issue login fabric port mailbox command.
1541 * ha = adapter block pointer.
1542 * loop_id = device loop ID.
1543 * domain = device domain.
1544 * area = device area.
1545 * al_pa = device AL_PA.
1546 * status = pointer for return status.
1547 * opt = command options.
1548 * TARGET_QUEUE_LOCK must be released.
1549 * ADAPTER_STATE_LOCK must be released.
1552 * qla2x00 local function return status code.
1558 qla2x00_login_fabric(scsi_qla_host_t
*ha
, uint16_t loop_id
, uint8_t domain
,
1559 uint8_t area
, uint8_t al_pa
, uint16_t *mb
, uint8_t opt
)
1563 mbx_cmd_t
*mcp
= &mc
;
1565 DEBUG11(printk("qla2x00_login_fabric(%ld): entered.\n", ha
->host_no
);)
1567 mcp
->mb
[0] = MBC_LOGIN_FABRIC_PORT
;
1568 mcp
->out_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1569 if (HAS_EXTENDED_IDS(ha
)) {
1570 mcp
->mb
[1] = loop_id
;
1572 mcp
->out_mb
|= MBX_10
;
1574 mcp
->mb
[1] = (loop_id
<< 8) | opt
;
1576 mcp
->mb
[2] = domain
;
1577 mcp
->mb
[3] = area
<< 8 | al_pa
;
1579 mcp
->in_mb
= MBX_7
|MBX_6
|MBX_2
|MBX_1
|MBX_0
;
1580 mcp
->tov
= (ha
->login_timeout
* 2) + (ha
->login_timeout
/ 2);
1582 rval
= qla2x00_mailbox_command(ha
, mcp
);
1584 /* Return mailbox statuses. */
1591 /* COS retrieved from Get-Port-Database mailbox command. */
1595 if (rval
!= QLA_SUCCESS
) {
1596 /* RLU tmp code: need to change main mailbox_command function to
1597 * return ok even when the mailbox completion value is not
1598 * SUCCESS. The caller needs to be responsible to interpret
1599 * the return values of this mailbox command if we're not
1600 * to change too much of the existing code.
1602 if (mcp
->mb
[0] == 0x4001 || mcp
->mb
[0] == 0x4002 ||
1603 mcp
->mb
[0] == 0x4003 || mcp
->mb
[0] == 0x4005 ||
1604 mcp
->mb
[0] == 0x4006)
1608 DEBUG2_3_11(printk("qla2x00_login_fabric(%ld): failed=%x "
1609 "mb[0]=%x mb[1]=%x mb[2]=%x.\n", ha
->host_no
, rval
,
1610 mcp
->mb
[0], mcp
->mb
[1], mcp
->mb
[2]);)
1613 DEBUG11(printk("qla2x00_login_fabric(%ld): done.\n",
1621 * qla2x00_login_local_device
1622 * Issue login loop port mailbox command.
1625 * ha = adapter block pointer.
1626 * loop_id = device loop ID.
1627 * opt = command options.
1630 * Return status code.
1637 qla2x00_login_local_device(scsi_qla_host_t
*ha
, uint16_t loop_id
,
1638 uint16_t *mb_ret
, uint8_t opt
)
1642 mbx_cmd_t
*mcp
= &mc
;
1644 DEBUG3(printk("%s(%ld): entered.\n", __func__
, ha
->host_no
);)
1646 mcp
->mb
[0] = MBC_LOGIN_LOOP_PORT
;
1647 if (HAS_EXTENDED_IDS(ha
))
1648 mcp
->mb
[1] = loop_id
;
1650 mcp
->mb
[1] = loop_id
<< 8;
1652 mcp
->out_mb
= MBX_2
|MBX_1
|MBX_0
;
1653 mcp
->in_mb
= MBX_7
|MBX_6
|MBX_1
|MBX_0
;
1654 mcp
->tov
= (ha
->login_timeout
* 2) + (ha
->login_timeout
/ 2);
1656 rval
= qla2x00_mailbox_command(ha
, mcp
);
1658 /* Return mailbox statuses. */
1659 if (mb_ret
!= NULL
) {
1660 mb_ret
[0] = mcp
->mb
[0];
1661 mb_ret
[1] = mcp
->mb
[1];
1662 mb_ret
[6] = mcp
->mb
[6];
1663 mb_ret
[7] = mcp
->mb
[7];
1666 if (rval
!= QLA_SUCCESS
) {
1667 /* AV tmp code: need to change main mailbox_command function to
1668 * return ok even when the mailbox completion value is not
1669 * SUCCESS. The caller needs to be responsible to interpret
1670 * the return values of this mailbox command if we're not
1671 * to change too much of the existing code.
1673 if (mcp
->mb
[0] == 0x4005 || mcp
->mb
[0] == 0x4006)
1676 DEBUG(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x "
1677 "mb[6]=%x mb[7]=%x.\n", __func__
, ha
->host_no
, rval
,
1678 mcp
->mb
[0], mcp
->mb
[1], mcp
->mb
[6], mcp
->mb
[7]);)
1679 DEBUG2_3(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x "
1680 "mb[6]=%x mb[7]=%x.\n", __func__
, ha
->host_no
, rval
,
1681 mcp
->mb
[0], mcp
->mb
[1], mcp
->mb
[6], mcp
->mb
[7]);)
1684 DEBUG3(printk("%s(%ld): done.\n", __func__
, ha
->host_no
);)
1691 qla24xx_fabric_logout(scsi_qla_host_t
*ha
, uint16_t loop_id
, uint8_t domain
,
1692 uint8_t area
, uint8_t al_pa
)
1695 struct logio_entry_24xx
*lg
;
1698 DEBUG11(printk("%s(%ld): entered.\n", __func__
, ha
->host_no
);)
1700 lg
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &lg_dma
);
1702 DEBUG2_3(printk("%s(%ld): failed to allocate Logout IOCB.\n",
1703 __func__
, ha
->host_no
));
1704 return QLA_MEMORY_ALLOC_FAILED
;
1706 memset(lg
, 0, sizeof(struct logio_entry_24xx
));
1708 lg
->entry_type
= LOGINOUT_PORT_IOCB_TYPE
;
1709 lg
->entry_count
= 1;
1710 lg
->nport_handle
= cpu_to_le16(loop_id
);
1712 __constant_cpu_to_le16(LCF_COMMAND_LOGO
|LCF_EXPL_LOGO
);
1713 lg
->port_id
[0] = al_pa
;
1714 lg
->port_id
[1] = area
;
1715 lg
->port_id
[2] = domain
;
1716 rval
= qla2x00_issue_iocb(ha
, lg
, lg_dma
, 0);
1717 if (rval
!= QLA_SUCCESS
) {
1718 DEBUG2_3_11(printk("%s(%ld): failed to issue Logout IOCB "
1719 "(%x).\n", __func__
, ha
->host_no
, rval
);)
1720 } else if (lg
->entry_status
!= 0) {
1721 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
1722 "-- error status (%x).\n", __func__
, ha
->host_no
,
1724 rval
= QLA_FUNCTION_FAILED
;
1725 } else if (lg
->comp_status
!= __constant_cpu_to_le16(CS_COMPLETE
)) {
1726 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
1727 "-- completion status (%x) ioparam=%x/%x.\n", __func__
,
1728 ha
->host_no
, le16_to_cpu(lg
->comp_status
),
1729 le32_to_cpu(lg
->io_parameter
[0]),
1730 le32_to_cpu(lg
->io_parameter
[1]));)
1733 DEBUG11(printk("%s(%ld): done.\n", __func__
, ha
->host_no
);)
1736 dma_pool_free(ha
->s_dma_pool
, lg
, lg_dma
);
1742 * qla2x00_fabric_logout
1743 * Issue logout fabric port mailbox command.
1746 * ha = adapter block pointer.
1747 * loop_id = device loop ID.
1748 * TARGET_QUEUE_LOCK must be released.
1749 * ADAPTER_STATE_LOCK must be released.
1752 * qla2x00 local function return status code.
1758 qla2x00_fabric_logout(scsi_qla_host_t
*ha
, uint16_t loop_id
, uint8_t domain
,
1759 uint8_t area
, uint8_t al_pa
)
1763 mbx_cmd_t
*mcp
= &mc
;
1765 DEBUG11(printk("qla2x00_fabric_logout(%ld): entered.\n",
1768 mcp
->mb
[0] = MBC_LOGOUT_FABRIC_PORT
;
1769 mcp
->out_mb
= MBX_1
|MBX_0
;
1770 if (HAS_EXTENDED_IDS(ha
)) {
1771 mcp
->mb
[1] = loop_id
;
1773 mcp
->out_mb
|= MBX_10
;
1775 mcp
->mb
[1] = loop_id
<< 8;
1778 mcp
->in_mb
= MBX_1
|MBX_0
;
1781 rval
= qla2x00_mailbox_command(ha
, mcp
);
1783 if (rval
!= QLA_SUCCESS
) {
1785 DEBUG2_3_11(printk("qla2x00_fabric_logout(%ld): failed=%x "
1786 "mbx1=%x.\n", ha
->host_no
, rval
, mcp
->mb
[1]);)
1789 DEBUG11(printk("qla2x00_fabric_logout(%ld): done.\n",
1797 * qla2x00_full_login_lip
1798 * Issue full login LIP mailbox command.
1801 * ha = adapter block pointer.
1802 * TARGET_QUEUE_LOCK must be released.
1803 * ADAPTER_STATE_LOCK must be released.
1806 * qla2x00 local function return status code.
1812 qla2x00_full_login_lip(scsi_qla_host_t
*ha
)
1816 mbx_cmd_t
*mcp
= &mc
;
1818 DEBUG11(printk("qla2x00_full_login_lip(%ld): entered.\n",
1821 mcp
->mb
[0] = MBC_LIP_FULL_LOGIN
;
1825 mcp
->out_mb
= MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1829 rval
= qla2x00_mailbox_command(ha
, mcp
);
1831 if (rval
!= QLA_SUCCESS
) {
1833 DEBUG2_3_11(printk("qla2x00_full_login_lip(%ld): failed=%x.\n",
1834 ha
->host_no
, rval
);)
1837 DEBUG11(printk("qla2x00_full_login_lip(%ld): done.\n",
1845 * qla2x00_get_id_list
1848 * ha = adapter block pointer.
1851 * qla2x00 local function return status code.
1857 qla2x00_get_id_list(scsi_qla_host_t
*ha
, void *id_list
, dma_addr_t id_list_dma
,
1862 mbx_cmd_t
*mcp
= &mc
;
1864 DEBUG11(printk("qla2x00_get_id_list(%ld): entered.\n",
1867 if (id_list
== NULL
)
1868 return QLA_FUNCTION_FAILED
;
1870 mcp
->mb
[0] = MBC_GET_ID_LIST
;
1871 mcp
->out_mb
= MBX_0
;
1872 if (IS_QLA24XX(ha
) || IS_QLA25XX(ha
)) {
1873 mcp
->mb
[2] = MSW(id_list_dma
);
1874 mcp
->mb
[3] = LSW(id_list_dma
);
1875 mcp
->mb
[6] = MSW(MSD(id_list_dma
));
1876 mcp
->mb
[7] = LSW(MSD(id_list_dma
));
1877 mcp
->out_mb
|= MBX_7
|MBX_6
|MBX_3
|MBX_2
;
1879 mcp
->mb
[1] = MSW(id_list_dma
);
1880 mcp
->mb
[2] = LSW(id_list_dma
);
1881 mcp
->mb
[3] = MSW(MSD(id_list_dma
));
1882 mcp
->mb
[6] = LSW(MSD(id_list_dma
));
1883 mcp
->out_mb
|= MBX_6
|MBX_3
|MBX_2
|MBX_1
;
1885 mcp
->in_mb
= MBX_1
|MBX_0
;
1888 rval
= qla2x00_mailbox_command(ha
, mcp
);
1890 if (rval
!= QLA_SUCCESS
) {
1892 DEBUG2_3_11(printk("qla2x00_get_id_list(%ld): failed=%x.\n",
1893 ha
->host_no
, rval
);)
1895 *entries
= mcp
->mb
[1];
1896 DEBUG11(printk("qla2x00_get_id_list(%ld): done.\n",
1904 * qla2x00_get_resource_cnts
1905 * Get current firmware resource counts.
1908 * ha = adapter block pointer.
1911 * qla2x00 local function return status code.
1917 qla2x00_get_resource_cnts(scsi_qla_host_t
*ha
, uint16_t *cur_xchg_cnt
,
1918 uint16_t *orig_xchg_cnt
, uint16_t *cur_iocb_cnt
, uint16_t *orig_iocb_cnt
)
1922 mbx_cmd_t
*mcp
= &mc
;
1924 DEBUG11(printk("%s(%ld): entered.\n", __func__
, ha
->host_no
));
1926 mcp
->mb
[0] = MBC_GET_RESOURCE_COUNTS
;
1927 mcp
->out_mb
= MBX_0
;
1928 mcp
->in_mb
= MBX_10
|MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
1931 rval
= qla2x00_mailbox_command(ha
, mcp
);
1933 if (rval
!= QLA_SUCCESS
) {
1935 DEBUG2_3_11(printk("%s(%ld): failed = %x.\n", __func__
,
1936 ha
->host_no
, mcp
->mb
[0]);)
1938 DEBUG11(printk("%s(%ld): done. mb1=%x mb2=%x mb3=%x mb6=%x "
1939 "mb7=%x mb10=%x.\n", __func__
, ha
->host_no
,
1940 mcp
->mb
[1], mcp
->mb
[2], mcp
->mb
[3], mcp
->mb
[6], mcp
->mb
[7],
1944 *cur_xchg_cnt
= mcp
->mb
[3];
1946 *orig_xchg_cnt
= mcp
->mb
[6];
1948 *cur_iocb_cnt
= mcp
->mb
[7];
1950 *orig_iocb_cnt
= mcp
->mb
[10];
1956 #if defined(QL_DEBUG_LEVEL_3)
1958 * qla2x00_get_fcal_position_map
1959 * Get FCAL (LILP) position map using mailbox command
1962 * ha = adapter state pointer.
1963 * pos_map = buffer pointer (can be NULL).
1966 * qla2x00 local function return status code.
1972 qla2x00_get_fcal_position_map(scsi_qla_host_t
*ha
, char *pos_map
)
1976 mbx_cmd_t
*mcp
= &mc
;
1978 dma_addr_t pmap_dma
;
1980 pmap
= dma_pool_alloc(ha
->s_dma_pool
, GFP_ATOMIC
, &pmap_dma
);
1982 DEBUG2_3_11(printk("%s(%ld): **** Mem Alloc Failed ****",
1983 __func__
, ha
->host_no
));
1984 return QLA_MEMORY_ALLOC_FAILED
;
1986 memset(pmap
, 0, FCAL_MAP_SIZE
);
1988 mcp
->mb
[0] = MBC_GET_FC_AL_POSITION_MAP
;
1989 mcp
->mb
[2] = MSW(pmap_dma
);
1990 mcp
->mb
[3] = LSW(pmap_dma
);
1991 mcp
->mb
[6] = MSW(MSD(pmap_dma
));
1992 mcp
->mb
[7] = LSW(MSD(pmap_dma
));
1993 mcp
->out_mb
= MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_0
;
1994 mcp
->in_mb
= MBX_1
|MBX_0
;
1995 mcp
->buf_size
= FCAL_MAP_SIZE
;
1996 mcp
->flags
= MBX_DMA_IN
;
1997 mcp
->tov
= (ha
->login_timeout
* 2) + (ha
->login_timeout
/ 2);
1998 rval
= qla2x00_mailbox_command(ha
, mcp
);
2000 if (rval
== QLA_SUCCESS
) {
2001 DEBUG11(printk("%s(%ld): (mb0=%x/mb1=%x) FC/AL Position Map "
2002 "size (%x)\n", __func__
, ha
->host_no
, mcp
->mb
[0],
2003 mcp
->mb
[1], (unsigned)pmap
[0]));
2004 DEBUG11(qla2x00_dump_buffer(pmap
, pmap
[0] + 1));
2007 memcpy(pos_map
, pmap
, FCAL_MAP_SIZE
);
2009 dma_pool_free(ha
->s_dma_pool
, pmap
, pmap_dma
);
2011 if (rval
!= QLA_SUCCESS
) {
2012 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
2013 ha
->host_no
, rval
));
2015 DEBUG11(printk("%s(%ld): done.\n", __func__
, ha
->host_no
));
2022 qla24xx_get_isp_stats(scsi_qla_host_t
*ha
, uint32_t *dwbuf
, uint32_t dwords
,
2027 mbx_cmd_t
*mcp
= &mc
;
2028 uint32_t *sbuf
, *siter
;
2029 dma_addr_t sbuf_dma
;
2031 DEBUG11(printk("%s(%ld): entered.\n", __func__
, ha
->host_no
);)
2033 if (dwords
> (DMA_POOL_SIZE
/ 4)) {
2034 DEBUG2_3_11(printk("%s(%ld): Unabled to retrieve %d DWORDs "
2035 "(max %d).\n", __func__
, ha
->host_no
, dwords
,
2036 DMA_POOL_SIZE
/ 4));
2039 sbuf
= dma_pool_alloc(ha
->s_dma_pool
, GFP_ATOMIC
, &sbuf_dma
);
2041 DEBUG2_3_11(printk("%s(%ld): Failed to allocate memory.\n",
2042 __func__
, ha
->host_no
));
2045 memset(sbuf
, 0, DMA_POOL_SIZE
);
2047 mcp
->mb
[0] = MBC_GET_LINK_PRIV_STATS
;
2048 mcp
->mb
[2] = MSW(sbuf_dma
);
2049 mcp
->mb
[3] = LSW(sbuf_dma
);
2050 mcp
->mb
[6] = MSW(MSD(sbuf_dma
));
2051 mcp
->mb
[7] = LSW(MSD(sbuf_dma
));
2052 mcp
->mb
[8] = dwords
;
2054 mcp
->out_mb
= MBX_10
|MBX_8
|MBX_7
|MBX_6
|MBX_3
|MBX_2
|MBX_0
;
2055 mcp
->in_mb
= MBX_2
|MBX_1
|MBX_0
;
2057 mcp
->flags
= IOCTL_CMD
;
2058 rval
= qla2x00_mailbox_command(ha
, mcp
);
2060 if (rval
== QLA_SUCCESS
) {
2061 if (mcp
->mb
[0] != MBS_COMMAND_COMPLETE
) {
2062 DEBUG2_3_11(printk("%s(%ld): cmd failed. mbx0=%x.\n",
2063 __func__
, ha
->host_no
, mcp
->mb
[0]));
2064 status
[0] = mcp
->mb
[0];
2067 /* Copy over data -- firmware data is LE. */
2070 *dwbuf
++ = le32_to_cpu(*siter
++);
2074 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
2075 ha
->host_no
, rval
));
2079 dma_pool_free(ha
->s_dma_pool
, sbuf
, sbuf_dma
);
2086 qla24xx_abort_command(scsi_qla_host_t
*ha
, srb_t
*sp
)
2090 unsigned long flags
= 0;
2092 struct abort_entry_24xx
*abt
;
2096 DEBUG11(printk("%s(%ld): entered.\n", __func__
, ha
->host_no
);)
2098 fcport
= sp
->fcport
;
2100 spin_lock_irqsave(&ha
->hardware_lock
, flags
);
2101 for (handle
= 1; handle
< MAX_OUTSTANDING_COMMANDS
; handle
++) {
2102 if (ha
->outstanding_cmds
[handle
] == sp
)
2105 spin_unlock_irqrestore(&ha
->hardware_lock
, flags
);
2106 if (handle
== MAX_OUTSTANDING_COMMANDS
) {
2107 /* Command not found. */
2108 return QLA_FUNCTION_FAILED
;
2111 abt
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &abt_dma
);
2113 DEBUG2_3(printk("%s(%ld): failed to allocate Abort IOCB.\n",
2114 __func__
, ha
->host_no
));
2115 return QLA_MEMORY_ALLOC_FAILED
;
2117 memset(abt
, 0, sizeof(struct abort_entry_24xx
));
2119 abt
->entry_type
= ABORT_IOCB_TYPE
;
2120 abt
->entry_count
= 1;
2121 abt
->nport_handle
= cpu_to_le16(fcport
->loop_id
);
2122 abt
->handle_to_abort
= handle
;
2123 abt
->port_id
[0] = fcport
->d_id
.b
.al_pa
;
2124 abt
->port_id
[1] = fcport
->d_id
.b
.area
;
2125 abt
->port_id
[2] = fcport
->d_id
.b
.domain
;
2126 rval
= qla2x00_issue_iocb(ha
, abt
, abt_dma
, 0);
2127 if (rval
!= QLA_SUCCESS
) {
2128 DEBUG2_3_11(printk("%s(%ld): failed to issue IOCB (%x).\n",
2129 __func__
, ha
->host_no
, rval
);)
2130 } else if (abt
->entry_status
!= 0) {
2131 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2132 "-- error status (%x).\n", __func__
, ha
->host_no
,
2133 abt
->entry_status
));
2134 rval
= QLA_FUNCTION_FAILED
;
2135 } else if (abt
->nport_handle
!= __constant_cpu_to_le16(0)) {
2136 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2137 "-- completion status (%x).\n", __func__
, ha
->host_no
,
2138 le16_to_cpu(abt
->nport_handle
));)
2139 rval
= QLA_FUNCTION_FAILED
;
2141 DEBUG11(printk("%s(%ld): done.\n", __func__
, ha
->host_no
);)
2142 sp
->flags
|= SRB_ABORT_PENDING
;
2145 dma_pool_free(ha
->s_dma_pool
, abt
, abt_dma
);
2150 struct tsk_mgmt_cmd
{
2152 struct tsk_mgmt_entry tsk
;
2153 struct sts_entry_24xx sts
;
2158 qla24xx_abort_target(fc_port_t
*fcport
)
2161 struct tsk_mgmt_cmd
*tsk
;
2163 scsi_qla_host_t
*ha
;
2168 DEBUG11(printk("%s(%ld): entered.\n", __func__
, fcport
->ha
->host_no
);)
2171 tsk
= dma_pool_alloc(ha
->s_dma_pool
, GFP_KERNEL
, &tsk_dma
);
2173 DEBUG2_3(printk("%s(%ld): failed to allocate Task Management "
2174 "IOCB.\n", __func__
, ha
->host_no
));
2175 return QLA_MEMORY_ALLOC_FAILED
;
2177 memset(tsk
, 0, sizeof(struct tsk_mgmt_cmd
));
2179 tsk
->p
.tsk
.entry_type
= TSK_MGMT_IOCB_TYPE
;
2180 tsk
->p
.tsk
.entry_count
= 1;
2181 tsk
->p
.tsk
.nport_handle
= cpu_to_le16(fcport
->loop_id
);
2182 tsk
->p
.tsk
.timeout
= __constant_cpu_to_le16(25);
2183 tsk
->p
.tsk
.control_flags
= __constant_cpu_to_le32(TCF_TARGET_RESET
);
2184 tsk
->p
.tsk
.port_id
[0] = fcport
->d_id
.b
.al_pa
;
2185 tsk
->p
.tsk
.port_id
[1] = fcport
->d_id
.b
.area
;
2186 tsk
->p
.tsk
.port_id
[2] = fcport
->d_id
.b
.domain
;
2187 rval
= qla2x00_issue_iocb(ha
, tsk
, tsk_dma
, 0);
2188 if (rval
!= QLA_SUCCESS
) {
2189 DEBUG2_3_11(printk("%s(%ld): failed to issue Target Reset IOCB "
2190 "(%x).\n", __func__
, ha
->host_no
, rval
);)
2192 } else if (tsk
->p
.sts
.entry_status
!= 0) {
2193 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2194 "-- error status (%x).\n", __func__
, ha
->host_no
,
2195 tsk
->p
.sts
.entry_status
));
2196 rval
= QLA_FUNCTION_FAILED
;
2198 } else if (tsk
->p
.sts
.comp_status
!=
2199 __constant_cpu_to_le16(CS_COMPLETE
)) {
2200 DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
2201 "-- completion status (%x).\n", __func__
,
2202 ha
->host_no
, le16_to_cpu(tsk
->p
.sts
.comp_status
));)
2203 rval
= QLA_FUNCTION_FAILED
;
2207 /* Issue marker IOCB. */
2208 rval
= qla2x00_marker(ha
, fcport
->loop_id
, 0, MK_SYNC_ID
);
2209 if (rval
!= QLA_SUCCESS
) {
2210 DEBUG2_3_11(printk("%s(%ld): failed to issue Marker IOCB "
2211 "(%x).\n", __func__
, ha
->host_no
, rval
);)
2213 DEBUG11(printk("%s(%ld): done.\n", __func__
, ha
->host_no
);)
2217 dma_pool_free(ha
->s_dma_pool
, tsk
, tsk_dma
);
2223 qla2x00_system_error(scsi_qla_host_t
*ha
)
2227 mbx_cmd_t
*mcp
= &mc
;
2229 if (!IS_QLA24XX(ha
) && !IS_QLA25XX(ha
))
2230 return QLA_FUNCTION_FAILED
;
2232 DEBUG11(printk("%s(%ld): entered.\n", __func__
, ha
->host_no
));
2234 mcp
->mb
[0] = MBC_GEN_SYSTEM_ERROR
;
2235 mcp
->out_mb
= MBX_0
;
2239 rval
= qla2x00_mailbox_command(ha
, mcp
);
2241 if (rval
!= QLA_SUCCESS
) {
2242 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
2243 ha
->host_no
, rval
));
2245 DEBUG11(printk("%s(%ld): done.\n", __func__
, ha
->host_no
));
2252 * qla2x00_get_serdes_params() -
2258 qla2x00_get_serdes_params(scsi_qla_host_t
*ha
, uint16_t *sw_em_1g
,
2259 uint16_t *sw_em_2g
, uint16_t *sw_em_4g
)
2263 mbx_cmd_t
*mcp
= &mc
;
2265 DEBUG11(printk("%s(%ld): entered.\n", __func__
, ha
->host_no
));
2267 mcp
->mb
[0] = MBC_SERDES_PARAMS
;
2269 mcp
->out_mb
= MBX_1
|MBX_0
;
2270 mcp
->in_mb
= MBX_4
|MBX_3
|MBX_2
|MBX_0
;
2273 rval
= qla2x00_mailbox_command(ha
, mcp
);
2275 if (rval
!= QLA_SUCCESS
) {
2277 DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__
,
2278 ha
->host_no
, rval
, mcp
->mb
[0]));
2280 DEBUG11(printk("%s(%ld): done.\n", __func__
, ha
->host_no
));
2283 *sw_em_1g
= mcp
->mb
[2];
2285 *sw_em_2g
= mcp
->mb
[3];
2287 *sw_em_4g
= mcp
->mb
[4];
2294 * qla2x00_set_serdes_params() -
2300 qla2x00_set_serdes_params(scsi_qla_host_t
*ha
, uint16_t sw_em_1g
,
2301 uint16_t sw_em_2g
, uint16_t sw_em_4g
)
2305 mbx_cmd_t
*mcp
= &mc
;
2307 DEBUG11(printk("%s(%ld): entered.\n", __func__
, ha
->host_no
));
2309 mcp
->mb
[0] = MBC_SERDES_PARAMS
;
2311 mcp
->mb
[2] = sw_em_1g
;
2312 mcp
->mb
[3] = sw_em_2g
;
2313 mcp
->mb
[4] = sw_em_4g
;
2314 mcp
->out_mb
= MBX_4
|MBX_3
|MBX_2
|MBX_1
|MBX_0
;
2318 rval
= qla2x00_mailbox_command(ha
, mcp
);
2320 if (rval
!= QLA_SUCCESS
) {
2322 DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__
,
2323 ha
->host_no
, rval
, mcp
->mb
[0]));
2326 DEBUG11(printk("%s(%ld): done.\n", __func__
, ha
->host_no
));
2333 qla2x00_stop_firmware(scsi_qla_host_t
*ha
)
2337 mbx_cmd_t
*mcp
= &mc
;
2339 if (!IS_QLA24XX(ha
) && !IS_QLA25XX(ha
))
2340 return QLA_FUNCTION_FAILED
;
2342 DEBUG11(printk("%s(%ld): entered.\n", __func__
, ha
->host_no
));
2344 mcp
->mb
[0] = MBC_STOP_FIRMWARE
;
2345 mcp
->out_mb
= MBX_0
;
2349 rval
= qla2x00_mailbox_command(ha
, mcp
);
2351 if (rval
!= QLA_SUCCESS
) {
2352 DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__
,
2353 ha
->host_no
, rval
));
2355 DEBUG11(printk("%s(%ld): done.\n", __func__
, ha
->host_no
));