[SCSI] qla2xxx: Correct issue where driver improperly issued SNS commands in N2N...
[linux-2.6/openmoko-kernel/knife-kernel.git] / arch / sparc64 / kernel / auxio.c
blob8852c20c8d9928e8d09bf7a35f4a76a0f2d4b71a
1 /* auxio.c: Probing for the Sparc AUXIO register at boot time.
3 * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
5 * Refactoring for unified NCR/PCIO support 2002 Eric Brower (ebrower@usa.net)
6 */
8 #include <linux/config.h>
9 #include <linux/kernel.h>
10 #include <linux/init.h>
11 #include <linux/ioport.h>
13 #include <asm/oplib.h>
14 #include <asm/io.h>
15 #include <asm/sbus.h>
16 #include <asm/ebus.h>
17 #include <asm/auxio.h>
19 /* This cannot be static, as it is referenced in irq.c */
20 void __iomem *auxio_register = NULL;
22 enum auxio_type {
23 AUXIO_TYPE_NODEV,
24 AUXIO_TYPE_SBUS,
25 AUXIO_TYPE_EBUS
28 static enum auxio_type auxio_devtype = AUXIO_TYPE_NODEV;
29 static DEFINE_SPINLOCK(auxio_lock);
31 static void __auxio_sbus_set(u8 bits_on, u8 bits_off)
33 if (auxio_register) {
34 unsigned char regval;
35 unsigned long flags;
36 unsigned char newval;
38 spin_lock_irqsave(&auxio_lock, flags);
40 regval = sbus_readb(auxio_register);
41 newval = regval | bits_on;
42 newval &= ~bits_off;
43 newval &= ~AUXIO_AUX1_MASK;
44 sbus_writeb(newval, auxio_register);
46 spin_unlock_irqrestore(&auxio_lock, flags);
50 static void __auxio_ebus_set(u8 bits_on, u8 bits_off)
52 if (auxio_register) {
53 unsigned char regval;
54 unsigned long flags;
55 unsigned char newval;
57 spin_lock_irqsave(&auxio_lock, flags);
59 regval = (u8)readl(auxio_register);
60 newval = regval | bits_on;
61 newval &= ~bits_off;
62 writel((u32)newval, auxio_register);
64 spin_unlock_irqrestore(&auxio_lock, flags);
68 static inline void __auxio_ebus_set_led(int on)
70 (on) ? __auxio_ebus_set(AUXIO_PCIO_LED, 0) :
71 __auxio_ebus_set(0, AUXIO_PCIO_LED) ;
74 static inline void __auxio_sbus_set_led(int on)
76 (on) ? __auxio_sbus_set(AUXIO_AUX1_LED, 0) :
77 __auxio_sbus_set(0, AUXIO_AUX1_LED) ;
80 void auxio_set_led(int on)
82 switch(auxio_devtype) {
83 case AUXIO_TYPE_SBUS:
84 __auxio_sbus_set_led(on);
85 break;
86 case AUXIO_TYPE_EBUS:
87 __auxio_ebus_set_led(on);
88 break;
89 default:
90 break;
94 static inline void __auxio_sbus_set_lte(int on)
96 (on) ? __auxio_sbus_set(AUXIO_AUX1_LTE, 0) :
97 __auxio_sbus_set(0, AUXIO_AUX1_LTE) ;
100 void auxio_set_lte(int on)
102 switch(auxio_devtype) {
103 case AUXIO_TYPE_SBUS:
104 __auxio_sbus_set_lte(on);
105 break;
106 case AUXIO_TYPE_EBUS:
107 /* FALL-THROUGH */
108 default:
109 break;
113 void __init auxio_probe(void)
115 struct sbus_bus *sbus;
116 struct sbus_dev *sdev = NULL;
118 for_each_sbus(sbus) {
119 for_each_sbusdev(sdev, sbus) {
120 if(!strcmp(sdev->prom_name, "auxio"))
121 goto found_sdev;
125 found_sdev:
126 if (sdev) {
127 auxio_devtype = AUXIO_TYPE_SBUS;
128 auxio_register = sbus_ioremap(&sdev->resource[0], 0,
129 sdev->reg_addrs[0].reg_size,
130 "auxiliaryIO");
132 #ifdef CONFIG_PCI
133 else {
134 struct linux_ebus *ebus;
135 struct linux_ebus_device *edev = NULL;
137 for_each_ebus(ebus) {
138 for_each_ebusdev(edev, ebus) {
139 if (!strcmp(edev->prom_name, "auxio"))
140 goto ebus_done;
143 ebus_done:
144 if (edev) {
145 auxio_devtype = AUXIO_TYPE_EBUS;
146 auxio_register =
147 ioremap(edev->resource[0].start, sizeof(u32));
150 auxio_set_led(AUXIO_LED_ON);
151 #endif