2 * BRIEF MODULE DESCRIPTION
3 * Alchemy/AMD Au1x00 pci support.
5 * Copyright 2001,2002,2003 MontaVista Software Inc.
6 * Author: MontaVista Software, Inc.
7 * ppopov@mvista.com or source@mvista.com
9 * Support for all devices (greater than 16) added by David Gathright.
11 * This program is free software; you can redistribute it and/or modify it
12 * under the terms of the GNU General Public License as published by the
13 * Free Software Foundation; either version 2 of the License, or (at your
14 * option) any later version.
16 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
17 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
18 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
19 * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
20 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
21 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
22 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
23 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
24 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
25 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 * You should have received a copy of the GNU General Public License along
28 * with this program; if not, write to the Free Software Foundation, Inc.,
29 * 675 Mass Ave, Cambridge, MA 02139, USA.
31 #include <linux/types.h>
32 #include <linux/pci.h>
33 #include <linux/kernel.h>
34 #include <linux/init.h>
35 #include <linux/vmalloc.h>
37 #include <asm/mach-au1x00/au1000.h>
41 #define DBG(x...) printk(x)
46 #define PCI_ACCESS_READ 0
47 #define PCI_ACCESS_WRITE 1
50 int (*board_pci_idsel
)(unsigned int devsel
, int assert);
52 void mod_wired_entry(int entry
, unsigned long entrylo0
,
53 unsigned long entrylo1
, unsigned long entryhi
,
54 unsigned long pagemask
)
56 unsigned long old_pagemask
;
57 unsigned long old_ctx
;
59 /* Save old context and create impossible VPN2 value */
60 old_ctx
= read_c0_entryhi() & 0xff;
61 old_pagemask
= read_c0_pagemask();
62 write_c0_index(entry
);
63 write_c0_pagemask(pagemask
);
64 write_c0_entryhi(entryhi
);
65 write_c0_entrylo0(entrylo0
);
66 write_c0_entrylo1(entrylo1
);
68 write_c0_entryhi(old_ctx
);
69 write_c0_pagemask(old_pagemask
);
72 struct vm_struct
*pci_cfg_vm
;
73 static int pci_cfg_wired_entry
;
74 static int first_cfg
= 1;
75 unsigned long last_entryLo0
, last_entryLo1
;
77 static int config_access(unsigned char access_type
, struct pci_bus
*bus
,
78 unsigned int dev_fn
, unsigned char where
,
81 #if defined( CONFIG_SOC_AU1500 ) || defined( CONFIG_SOC_AU1550 )
82 unsigned int device
= PCI_SLOT(dev_fn
);
83 unsigned int function
= PCI_FUNC(dev_fn
);
84 unsigned long offset
, status
;
85 unsigned long cfg_base
;
87 int error
= PCIBIOS_SUCCESSFUL
;
88 unsigned long entryLo0
, entryLo1
;
95 local_irq_save(flags
);
96 au_writel(((0x2000 << 16) | (au_readl(Au1500_PCI_STATCMD
) & 0xffff)),
101 * We can't ioremap the entire pci config space because it's
102 * too large. Nor can we call ioremap dynamically because some
103 * device drivers use the pci config routines from within
104 * interrupt handlers and that becomes a problem in get_vm_area().
105 * We use one wired tlb to handle all config accesses for all
106 * busses. To improve performance, if the current device
107 * is the same as the last device accessed, we don't touch the
111 /* reserve a wired entry for pci config accesses */
113 pci_cfg_vm
= get_vm_area(0x2000, VM_IOREMAP
);
115 panic (KERN_ERR
"PCI unable to get vm area\n");
116 pci_cfg_wired_entry
= read_c0_wired();
117 add_wired_entry(0, 0, (unsigned long)pci_cfg_vm
->addr
, PM_4K
);
118 last_entryLo0
= last_entryLo1
= 0xffffffff;
121 /* Allow board vendors to implement their own off-chip idsel.
122 * If it doesn't succeed, may as well bail out at this point.
124 if (board_pci_idsel
) {
125 if (board_pci_idsel(device
, 1) == 0) {
127 local_irq_restore(flags
);
132 /* setup the config window */
133 if (bus
->number
== 0) {
134 cfg_base
= ((1<<device
)<<11);
136 cfg_base
= 0x80000000 | (bus
->number
<<16) | (device
<<11);
139 /* setup the lower bits of the 36 bit address */
140 offset
= (function
<< 8) | (where
& ~0x3);
141 /* pick up any address that falls below the page mask */
142 offset
|= cfg_base
& ~PAGE_MASK
;
145 cfg_base
= cfg_base
& PAGE_MASK
;
147 entryLo0
= (6 << 26) | (cfg_base
>> 6) | (2 << 3) | 7;
148 entryLo1
= (6 << 26) | (cfg_base
>> 6) | (0x1000 >> 6) | (2 << 3) | 7;
150 if ((entryLo0
!= last_entryLo0
) || (entryLo1
!= last_entryLo1
)) {
151 mod_wired_entry(pci_cfg_wired_entry
, entryLo0
, entryLo1
,
152 (unsigned long)pci_cfg_vm
->addr
, PM_4K
);
153 last_entryLo0
= entryLo0
;
154 last_entryLo1
= entryLo1
;
157 if (access_type
== PCI_ACCESS_WRITE
) {
158 au_writel(*data
, (int)(pci_cfg_vm
->addr
+ offset
));
160 *data
= au_readl((int)(pci_cfg_vm
->addr
+ offset
));
164 DBG("cfg_access %d bus->number %d dev %d at %x *data %x conf %x\n",
165 access_type
, bus
->number
, device
, where
, *data
, offset
);
167 /* check master abort */
168 status
= au_readl(Au1500_PCI_STATCMD
);
170 if (status
& (1<<29)) {
173 DBG("Au1x Master Abort\n");
174 } else if ((status
>> 28) & 0xf) {
175 DBG("PCI ERR detected: device %d, status %x\n", device
, ((status
>> 28) & 0xf));
178 au_writel(status
& 0xf000ffff, Au1500_PCI_STATCMD
);
184 /* Take away the idsel.
186 if (board_pci_idsel
) {
187 (void)board_pci_idsel(device
, 0);
190 local_irq_restore(flags
);
195 static int read_config_byte(struct pci_bus
*bus
, unsigned int devfn
,
201 ret
= config_access(PCI_ACCESS_READ
, bus
, devfn
, where
, &data
);
211 static int read_config_word(struct pci_bus
*bus
, unsigned int devfn
,
212 int where
, u16
* val
)
217 ret
= config_access(PCI_ACCESS_READ
, bus
, devfn
, where
, &data
);
220 *val
= data
& 0xffff;
224 static int read_config_dword(struct pci_bus
*bus
, unsigned int devfn
,
225 int where
, u32
* val
)
229 ret
= config_access(PCI_ACCESS_READ
, bus
, devfn
, where
, val
);
234 write_config_byte(struct pci_bus
*bus
, unsigned int devfn
, int where
,
239 if (config_access(PCI_ACCESS_READ
, bus
, devfn
, where
, &data
))
242 data
= (data
& ~(0xff << ((where
& 3) << 3))) |
243 (val
<< ((where
& 3) << 3));
245 if (config_access(PCI_ACCESS_WRITE
, bus
, devfn
, where
, &data
))
248 return PCIBIOS_SUCCESSFUL
;
252 write_config_word(struct pci_bus
*bus
, unsigned int devfn
, int where
,
257 if (config_access(PCI_ACCESS_READ
, bus
, devfn
, where
, &data
))
260 data
= (data
& ~(0xffff << ((where
& 3) << 3))) |
261 (val
<< ((where
& 3) << 3));
263 if (config_access(PCI_ACCESS_WRITE
, bus
, devfn
, where
, &data
))
267 return PCIBIOS_SUCCESSFUL
;
271 write_config_dword(struct pci_bus
*bus
, unsigned int devfn
, int where
,
274 if (config_access(PCI_ACCESS_WRITE
, bus
, devfn
, where
, &val
))
277 return PCIBIOS_SUCCESSFUL
;
280 static int config_read(struct pci_bus
*bus
, unsigned int devfn
,
281 int where
, int size
, u32
* val
)
286 int rc
= read_config_byte(bus
, devfn
, where
, &_val
);
292 int rc
= read_config_word(bus
, devfn
, where
, &_val
);
297 return read_config_dword(bus
, devfn
, where
, val
);
301 static int config_write(struct pci_bus
*bus
, unsigned int devfn
,
302 int where
, int size
, u32 val
)
306 return write_config_byte(bus
, devfn
, where
, (u8
) val
);
308 return write_config_word(bus
, devfn
, where
, (u16
) val
);
310 return write_config_dword(bus
, devfn
, where
, val
);
315 struct pci_ops au1x_pci_ops
= {