2 * Copyright (C) 2003 - 2006 NetXen, Inc.
5 * This program is free software; you can redistribute it and/or
6 * modify it under the terms of the GNU General Public License
7 * as published by the Free Software Foundation; either version 2
8 * of the License, or (at your option) any later version.
10 * This program is distributed in the hope that it will be useful, but
11 * WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 59 Temple Place - Suite 330, Boston,
20 * The full GNU General Public License is included in this distribution
21 * in the file called LICENSE.
23 * Contact Information:
26 * 3965 Freedom Circle, Fourth floor,
27 * Santa Clara, CA 95054
30 * Main source file for NetXen NIC Driver on Linux
34 #include <linux/vmalloc.h>
35 #include <linux/highmem.h>
36 #include "netxen_nic_hw.h"
38 #include "netxen_nic.h"
39 #include "netxen_nic_phan_reg.h"
41 #include <linux/dma-mapping.h>
44 MODULE_DESCRIPTION("NetXen Multi port (1/10) Gigabit Network Driver");
45 MODULE_LICENSE("GPL");
46 MODULE_VERSION(NETXEN_NIC_LINUX_VERSIONID
);
48 char netxen_nic_driver_name
[] = "netxen_nic";
49 static char netxen_nic_driver_string
[] = "NetXen Network Driver version "
50 NETXEN_NIC_LINUX_VERSIONID
;
52 #define NETXEN_NETDEV_WEIGHT 120
53 #define NETXEN_ADAPTER_UP_MAGIC 777
54 #define NETXEN_NIC_PEG_TUNE 0
56 #define DMA_32BIT_MASK 0x00000000ffffffffULL
57 #define DMA_35BIT_MASK 0x00000007ffffffffULL
59 /* Local functions to NetXen NIC driver */
60 static int __devinit
netxen_nic_probe(struct pci_dev
*pdev
,
61 const struct pci_device_id
*ent
);
62 static void __devexit
netxen_nic_remove(struct pci_dev
*pdev
);
63 static int netxen_nic_open(struct net_device
*netdev
);
64 static int netxen_nic_close(struct net_device
*netdev
);
65 static int netxen_nic_xmit_frame(struct sk_buff
*, struct net_device
*);
66 static void netxen_tx_timeout(struct net_device
*netdev
);
67 static void netxen_tx_timeout_task(struct work_struct
*work
);
68 static void netxen_watchdog(unsigned long);
69 static int netxen_handle_int(struct netxen_adapter
*, struct net_device
*);
70 static int netxen_nic_poll(struct napi_struct
*napi
, int budget
);
71 #ifdef CONFIG_NET_POLL_CONTROLLER
72 static void netxen_nic_poll_controller(struct net_device
*netdev
);
74 static irqreturn_t
netxen_intr(int irq
, void *data
);
76 int physical_port
[] = {0, 1, 2, 3};
78 /* PCI Device ID Table */
79 static struct pci_device_id netxen_pci_tbl
[] __devinitdata
= {
80 {PCI_DEVICE(0x4040, 0x0001)},
81 {PCI_DEVICE(0x4040, 0x0002)},
82 {PCI_DEVICE(0x4040, 0x0003)},
83 {PCI_DEVICE(0x4040, 0x0004)},
84 {PCI_DEVICE(0x4040, 0x0005)},
85 {PCI_DEVICE(0x4040, 0x0024)},
86 {PCI_DEVICE(0x4040, 0x0025)},
90 MODULE_DEVICE_TABLE(pci
, netxen_pci_tbl
);
92 struct workqueue_struct
*netxen_workq
;
93 static void netxen_watchdog(unsigned long);
95 static inline void netxen_nic_update_cmd_producer(struct netxen_adapter
*adapter
,
96 uint32_t crb_producer
)
98 switch (adapter
->portnum
) {
100 writel(crb_producer
, NETXEN_CRB_NORMALIZE
101 (adapter
, CRB_CMD_PRODUCER_OFFSET
));
104 writel(crb_producer
, NETXEN_CRB_NORMALIZE
105 (adapter
, CRB_CMD_PRODUCER_OFFSET_1
));
108 writel(crb_producer
, NETXEN_CRB_NORMALIZE
109 (adapter
, CRB_CMD_PRODUCER_OFFSET_2
));
112 writel(crb_producer
, NETXEN_CRB_NORMALIZE
113 (adapter
, CRB_CMD_PRODUCER_OFFSET_3
));
116 printk(KERN_WARNING
"We tried to update "
117 "CRB_CMD_PRODUCER_OFFSET for invalid "
118 "PCI function id %d\n",
124 static inline void netxen_nic_update_cmd_consumer(struct netxen_adapter
*adapter
,
127 switch (adapter
->portnum
) {
129 writel(crb_consumer
, NETXEN_CRB_NORMALIZE
130 (adapter
, CRB_CMD_CONSUMER_OFFSET
));
133 writel(crb_consumer
, NETXEN_CRB_NORMALIZE
134 (adapter
, CRB_CMD_CONSUMER_OFFSET_1
));
137 writel(crb_consumer
, NETXEN_CRB_NORMALIZE
138 (adapter
, CRB_CMD_CONSUMER_OFFSET_2
));
141 writel(crb_consumer
, NETXEN_CRB_NORMALIZE
142 (adapter
, CRB_CMD_CONSUMER_OFFSET_3
));
145 printk(KERN_WARNING
"We tried to update "
146 "CRB_CMD_PRODUCER_OFFSET for invalid "
147 "PCI function id %d\n",
153 #define ADAPTER_LIST_SIZE 12
154 int netxen_cards_found
;
156 static void netxen_nic_disable_int(struct netxen_adapter
*adapter
)
158 uint32_t mask
= 0x7ff;
161 DPRINTK(1, INFO
, "Entered ISR Disable \n");
163 switch (adapter
->portnum
) {
165 writel(0x0, NETXEN_CRB_NORMALIZE(adapter
, CRB_SW_INT_MASK_0
));
168 writel(0x0, NETXEN_CRB_NORMALIZE(adapter
, CRB_SW_INT_MASK_1
));
171 writel(0x0, NETXEN_CRB_NORMALIZE(adapter
, CRB_SW_INT_MASK_2
));
174 writel(0x0, NETXEN_CRB_NORMALIZE(adapter
, CRB_SW_INT_MASK_3
));
178 if (adapter
->intr_scheme
!= -1 &&
179 adapter
->intr_scheme
!= INTR_SCHEME_PERPORT
)
180 writel(mask
,PCI_OFFSET_SECOND_RANGE(adapter
, ISR_INT_MASK
));
182 /* Window = 0 or 1 */
183 if (!(adapter
->flags
& NETXEN_NIC_MSI_ENABLED
)) {
186 PCI_OFFSET_SECOND_RANGE(adapter
, ISR_INT_TARGET_STATUS
));
187 mask
= readl(pci_base_offset(adapter
, ISR_INT_VECTOR
));
194 printk(KERN_NOTICE
"%s: Failed to disable interrupt completely\n",
195 netxen_nic_driver_name
);
199 DPRINTK(1, INFO
, "Done with Disable Int\n");
202 static void netxen_nic_enable_int(struct netxen_adapter
*adapter
)
206 DPRINTK(1, INFO
, "Entered ISR Enable \n");
208 if (adapter
->intr_scheme
!= -1 &&
209 adapter
->intr_scheme
!= INTR_SCHEME_PERPORT
) {
210 switch (adapter
->ahw
.board_type
) {
214 case NETXEN_NIC_XGBE
:
222 writel(mask
, PCI_OFFSET_SECOND_RANGE(adapter
, ISR_INT_MASK
));
225 switch (adapter
->portnum
) {
227 writel(0x1, NETXEN_CRB_NORMALIZE(adapter
, CRB_SW_INT_MASK_0
));
230 writel(0x1, NETXEN_CRB_NORMALIZE(adapter
, CRB_SW_INT_MASK_1
));
233 writel(0x1, NETXEN_CRB_NORMALIZE(adapter
, CRB_SW_INT_MASK_2
));
236 writel(0x1, NETXEN_CRB_NORMALIZE(adapter
, CRB_SW_INT_MASK_3
));
240 if (!(adapter
->flags
& NETXEN_NIC_MSI_ENABLED
)) {
242 if (adapter
->intr_scheme
!= -1 &&
243 adapter
->intr_scheme
!= INTR_SCHEME_PERPORT
) {
244 writel(0X0, NETXEN_CRB_NORMALIZE(adapter
, CRB_INT_VECTOR
));
247 PCI_OFFSET_SECOND_RANGE(adapter
, ISR_INT_TARGET_MASK
));
250 DPRINTK(1, INFO
, "Done with enable Int\n");
256 * The Linux system will invoke this after identifying the vendor ID and
257 * device Id in the pci_tbl supported by this module.
259 * A quad port card has one operational PCI config space, (function 0),
260 * which is used to access all four ports.
262 * This routine will initialize the adapter, and setup the global parameters
263 * along with the port's specific structure.
266 netxen_nic_probe(struct pci_dev
*pdev
, const struct pci_device_id
*ent
)
268 struct net_device
*netdev
= NULL
;
269 struct netxen_adapter
*adapter
= NULL
;
270 void __iomem
*mem_ptr0
= NULL
;
271 void __iomem
*mem_ptr1
= NULL
;
272 void __iomem
*mem_ptr2
= NULL
;
273 unsigned long first_page_group_end
;
274 unsigned long first_page_group_start
;
277 u8 __iomem
*db_ptr
= NULL
;
278 unsigned long mem_base
, mem_len
, db_base
, db_len
;
279 int pci_using_dac
, i
= 0, err
;
281 struct netxen_recv_context
*recv_ctx
= NULL
;
282 struct netxen_rcv_desc_ctx
*rcv_desc
= NULL
;
283 struct netxen_cmd_buffer
*cmd_buf_arr
= NULL
;
284 u64 mac_addr
[FLASH_NUM_PORTS
+ 1];
287 int pci_func_id
= PCI_FUNC(pdev
->devfn
);
288 DECLARE_MAC_BUF(mac
);
290 printk(KERN_INFO
"%s \n", netxen_nic_driver_string
);
292 if (pdev
->class != 0x020000) {
293 printk(KERN_ERR
"NetXen function %d, class %x will not"
294 "be enabled.\n",pci_func_id
, pdev
->class);
297 if ((err
= pci_enable_device(pdev
)))
299 if (!(pci_resource_flags(pdev
, 0) & IORESOURCE_MEM
)) {
301 goto err_out_disable_pdev
;
304 if ((err
= pci_request_regions(pdev
, netxen_nic_driver_name
)))
305 goto err_out_disable_pdev
;
307 pci_set_master(pdev
);
308 if (pdev
->revision
== NX_P2_C1
&&
309 (pci_set_dma_mask(pdev
, DMA_35BIT_MASK
) == 0) &&
310 (pci_set_consistent_dma_mask(pdev
, DMA_35BIT_MASK
) == 0)) {
313 if ((err
= pci_set_dma_mask(pdev
, DMA_32BIT_MASK
)) ||
314 (err
= pci_set_consistent_dma_mask(pdev
, DMA_32BIT_MASK
)))
315 goto err_out_free_res
;
321 netdev
= alloc_etherdev(sizeof(struct netxen_adapter
));
323 printk(KERN_ERR
"%s: Failed to allocate memory for the "
324 "device block.Check system memory resource"
325 " usage.\n", netxen_nic_driver_name
);
326 goto err_out_free_res
;
329 SET_NETDEV_DEV(netdev
, &pdev
->dev
);
331 adapter
= netdev
->priv
;
333 adapter
->ahw
.pdev
= pdev
;
334 adapter
->ahw
.pci_func
= pci_func_id
;
335 spin_lock_init(&adapter
->tx_lock
);
337 /* remap phys address */
338 mem_base
= pci_resource_start(pdev
, 0); /* 0 is for BAR 0 */
339 mem_len
= pci_resource_len(pdev
, 0);
341 /* 128 Meg of memory */
342 if (mem_len
== NETXEN_PCI_128MB_SIZE
) {
343 mem_ptr0
= ioremap(mem_base
, FIRST_PAGE_GROUP_SIZE
);
344 mem_ptr1
= ioremap(mem_base
+ SECOND_PAGE_GROUP_START
,
345 SECOND_PAGE_GROUP_SIZE
);
346 mem_ptr2
= ioremap(mem_base
+ THIRD_PAGE_GROUP_START
,
347 THIRD_PAGE_GROUP_SIZE
);
348 first_page_group_start
= FIRST_PAGE_GROUP_START
;
349 first_page_group_end
= FIRST_PAGE_GROUP_END
;
350 } else if (mem_len
== NETXEN_PCI_32MB_SIZE
) {
351 mem_ptr1
= ioremap(mem_base
, SECOND_PAGE_GROUP_SIZE
);
352 mem_ptr2
= ioremap(mem_base
+ THIRD_PAGE_GROUP_START
-
353 SECOND_PAGE_GROUP_START
, THIRD_PAGE_GROUP_SIZE
);
354 first_page_group_start
= 0;
355 first_page_group_end
= 0;
358 goto err_out_free_netdev
;
361 if (((mem_ptr0
== 0UL) && (mem_len
== NETXEN_PCI_128MB_SIZE
)) ||
362 (mem_ptr1
== 0UL) || (mem_ptr2
== 0UL)) {
364 "Cannot remap adapter memory aborting.:"
365 "0 -> %p, 1 -> %p, 2 -> %p\n",
366 mem_ptr0
, mem_ptr1
, mem_ptr2
);
369 goto err_out_iounmap
;
371 db_base
= pci_resource_start(pdev
, 4); /* doorbell is on bar 4 */
372 db_len
= pci_resource_len(pdev
, 4);
375 printk(KERN_ERR
"%s: doorbell is disabled\n",
376 netxen_nic_driver_name
);
378 goto err_out_iounmap
;
380 DPRINTK(INFO
, "doorbell ioremap from %lx a size of %lx\n", db_base
,
383 db_ptr
= ioremap(db_base
, NETXEN_DB_MAPSIZE_BYTES
);
385 printk(KERN_ERR
"%s: Failed to allocate doorbell map.",
386 netxen_nic_driver_name
);
388 goto err_out_iounmap
;
390 DPRINTK(INFO
, "doorbell ioremaped at %p\n", db_ptr
);
392 adapter
->ahw
.pci_base0
= mem_ptr0
;
393 adapter
->ahw
.first_page_group_start
= first_page_group_start
;
394 adapter
->ahw
.first_page_group_end
= first_page_group_end
;
395 adapter
->ahw
.pci_base1
= mem_ptr1
;
396 adapter
->ahw
.pci_base2
= mem_ptr2
;
397 adapter
->ahw
.db_base
= db_ptr
;
398 adapter
->ahw
.db_len
= db_len
;
400 adapter
->netdev
= netdev
;
401 adapter
->pdev
= pdev
;
403 netif_napi_add(netdev
, &adapter
->napi
,
404 netxen_nic_poll
, NETXEN_NETDEV_WEIGHT
);
406 /* this will be read from FW later */
407 adapter
->intr_scheme
= -1;
409 /* This will be reset for mezz cards */
410 adapter
->portnum
= pci_func_id
;
411 adapter
->status
&= ~NETXEN_NETDEV_STATUS
;
412 adapter
->rx_csum
= 1;
414 netdev
->open
= netxen_nic_open
;
415 netdev
->stop
= netxen_nic_close
;
416 netdev
->hard_start_xmit
= netxen_nic_xmit_frame
;
417 netdev
->get_stats
= netxen_nic_get_stats
;
418 netdev
->set_multicast_list
= netxen_nic_set_multi
;
419 netdev
->set_mac_address
= netxen_nic_set_mac
;
420 netdev
->change_mtu
= netxen_nic_change_mtu
;
421 netdev
->tx_timeout
= netxen_tx_timeout
;
422 netdev
->watchdog_timeo
= HZ
;
424 netxen_nic_change_mtu(netdev
, netdev
->mtu
);
426 SET_ETHTOOL_OPS(netdev
, &netxen_nic_ethtool_ops
);
427 #ifdef CONFIG_NET_POLL_CONTROLLER
428 netdev
->poll_controller
= netxen_nic_poll_controller
;
430 /* ScatterGather support */
431 netdev
->features
= NETIF_F_SG
;
432 netdev
->features
|= NETIF_F_IP_CSUM
;
433 netdev
->features
|= NETIF_F_TSO
;
436 netdev
->features
|= NETIF_F_HIGHDMA
;
438 if (pci_enable_msi(pdev
))
439 adapter
->flags
&= ~NETXEN_NIC_MSI_ENABLED
;
441 adapter
->flags
|= NETXEN_NIC_MSI_ENABLED
;
443 netdev
->irq
= pdev
->irq
;
444 INIT_WORK(&adapter
->tx_timeout_task
, netxen_tx_timeout_task
);
447 * Set the CRB window to invalid. If any register in window 0 is
448 * accessed it should set the window to 0 and then reset it to 1.
450 adapter
->curr_window
= 255;
452 /* initialize the adapter */
453 netxen_initialize_adapter_hw(adapter
);
456 * Adapter in our case is quad port so initialize it before
457 * initializing the ports
460 netxen_initialize_adapter_ops(adapter
);
462 adapter
->max_tx_desc_count
= MAX_CMD_DESCRIPTORS_HOST
;
463 if ((adapter
->ahw
.boardcfg
.board_type
== NETXEN_BRDTYPE_P2_SB35_4G
) ||
464 (adapter
->ahw
.boardcfg
.board_type
==
465 NETXEN_BRDTYPE_P2_SB31_2G
))
466 adapter
->max_rx_desc_count
= MAX_RCV_DESCRIPTORS_1G
;
468 adapter
->max_rx_desc_count
= MAX_RCV_DESCRIPTORS
;
469 adapter
->max_jumbo_rx_desc_count
= MAX_JUMBO_RCV_DESCRIPTORS
;
470 adapter
->max_lro_rx_desc_count
= MAX_LRO_RCV_DESCRIPTORS
;
472 cmd_buf_arr
= (struct netxen_cmd_buffer
*)vmalloc(TX_RINGSIZE
);
473 if (cmd_buf_arr
== NULL
) {
475 "%s: Could not allocate cmd_buf_arr memory:%d\n",
476 netxen_nic_driver_name
, (int)TX_RINGSIZE
);
478 goto err_out_free_adapter
;
480 memset(cmd_buf_arr
, 0, TX_RINGSIZE
);
481 adapter
->cmd_buf_arr
= cmd_buf_arr
;
483 for (i
= 0; i
< MAX_RCV_CTX
; ++i
) {
484 recv_ctx
= &adapter
->recv_ctx
[i
];
485 for (ring
= 0; ring
< NUM_RCV_DESC_RINGS
; ring
++) {
486 rcv_desc
= &recv_ctx
->rcv_desc
[ring
];
487 switch (RCV_DESC_TYPE(ring
)) {
488 case RCV_DESC_NORMAL
:
489 rcv_desc
->max_rx_desc_count
=
490 adapter
->max_rx_desc_count
;
491 rcv_desc
->flags
= RCV_DESC_NORMAL
;
492 rcv_desc
->dma_size
= RX_DMA_MAP_LEN
;
493 rcv_desc
->skb_size
= MAX_RX_BUFFER_LENGTH
;
497 rcv_desc
->max_rx_desc_count
=
498 adapter
->max_jumbo_rx_desc_count
;
499 rcv_desc
->flags
= RCV_DESC_JUMBO
;
500 rcv_desc
->dma_size
= RX_JUMBO_DMA_MAP_LEN
;
501 rcv_desc
->skb_size
= MAX_RX_JUMBO_BUFFER_LENGTH
;
505 rcv_desc
->max_rx_desc_count
=
506 adapter
->max_lro_rx_desc_count
;
507 rcv_desc
->flags
= RCV_DESC_LRO
;
508 rcv_desc
->dma_size
= RX_LRO_DMA_MAP_LEN
;
509 rcv_desc
->skb_size
= MAX_RX_LRO_BUFFER_LENGTH
;
513 rcv_desc
->rx_buf_arr
= (struct netxen_rx_buffer
*)
514 vmalloc(RCV_BUFFSIZE
);
516 if (rcv_desc
->rx_buf_arr
== NULL
) {
517 printk(KERN_ERR
"%s: Could not allocate"
518 "rcv_desc->rx_buf_arr memory:%d\n",
519 netxen_nic_driver_name
,
522 goto err_out_free_rx_buffer
;
524 memset(rcv_desc
->rx_buf_arr
, 0, RCV_BUFFSIZE
);
529 netxen_initialize_adapter_sw(adapter
); /* initialize the buffers in adapter */
531 /* Mezz cards have PCI function 0,2,3 enabled */
532 if ((adapter
->ahw
.boardcfg
.board_type
== NETXEN_BRDTYPE_P2_SB31_10G_IMEZ
)
533 && (pci_func_id
>= 2))
534 adapter
->portnum
= pci_func_id
- 2;
537 if(adapter
->portnum
== 0) {
538 netxen_pinit_from_rom(adapter
, 0);
540 netxen_load_firmware(adapter
);
544 init_timer(&adapter
->watchdog_timer
);
545 adapter
->ahw
.xg_linkup
= 0;
546 adapter
->watchdog_timer
.function
= &netxen_watchdog
;
547 adapter
->watchdog_timer
.data
= (unsigned long)adapter
;
548 INIT_WORK(&adapter
->watchdog_task
, netxen_watchdog_task
);
549 adapter
->ahw
.pdev
= pdev
;
550 adapter
->proc_cmd_buf_counter
= 0;
551 adapter
->ahw
.revision_id
= pdev
->revision
;
553 /* make sure Window == 1 */
554 netxen_nic_pci_change_crbwindow(adapter
, 1);
556 netxen_nic_update_cmd_producer(adapter
, 0);
557 netxen_nic_update_cmd_consumer(adapter
, 0);
558 writel(0, NETXEN_CRB_NORMALIZE(adapter
, CRB_HOST_CMD_ADDR_LO
));
560 if (netxen_is_flash_supported(adapter
) == 0 &&
561 netxen_get_flash_mac_addr(adapter
, mac_addr
) == 0)
567 unsigned char *p
= (unsigned char *)&mac_addr
[adapter
->portnum
];
568 netdev
->dev_addr
[0] = *(p
+ 5);
569 netdev
->dev_addr
[1] = *(p
+ 4);
570 netdev
->dev_addr
[2] = *(p
+ 3);
571 netdev
->dev_addr
[3] = *(p
+ 2);
572 netdev
->dev_addr
[4] = *(p
+ 1);
573 netdev
->dev_addr
[5] = *(p
+ 0);
575 memcpy(netdev
->perm_addr
, netdev
->dev_addr
,
577 if (!is_valid_ether_addr(netdev
->perm_addr
)) {
578 printk(KERN_ERR
"%s: Bad MAC address %s.\n",
579 netxen_nic_driver_name
,
580 print_mac(mac
, netdev
->dev_addr
));
582 if (adapter
->macaddr_set
)
583 adapter
->macaddr_set(adapter
,
588 if (adapter
->portnum
== 0) {
589 err
= netxen_initialize_adapter_offload(adapter
);
591 goto err_out_free_rx_buffer
;
592 val
= readl(NETXEN_CRB_NORMALIZE(adapter
,
593 NETXEN_CAM_RAM(0x1fc)));
594 if (val
== 0x55555555) {
595 /* This is the first boot after power up */
596 netxen_nic_read_w0(adapter
, NETXEN_PCIE_REG(0x4), &val
);
599 netxen_nic_write_w0(adapter
, NETXEN_PCIE_REG(0x4), val
);
600 netxen_nic_read_w0(adapter
, NETXEN_PCIE_REG(0x4), &val
);
602 printk(KERN_ERR
"%s: failed to set MSI bit in PCI-e reg\n",
603 netxen_nic_driver_name
);
605 val
= readl(NETXEN_CRB_NORMALIZE(adapter
,
606 NETXEN_ROMUSB_GLB_SW_RESET
));
607 printk(KERN_INFO
"NetXen: read 0x%08x for reset reg.\n",val
);
608 if (val
!= 0x80000f) {
609 /* clear the register for future unloads/loads */
610 writel(0, NETXEN_CRB_NORMALIZE(adapter
,
611 NETXEN_CAM_RAM(0x1fc)));
612 printk(KERN_ERR
"ERROR in NetXen HW init sequence.\n");
614 goto err_out_free_dev
;
618 /* clear the register for future unloads/loads */
619 writel(0, NETXEN_CRB_NORMALIZE(adapter
, NETXEN_CAM_RAM(0x1fc)));
620 printk(KERN_INFO
"State: 0x%0x\n",
621 readl(NETXEN_CRB_NORMALIZE(adapter
, CRB_CMDPEG_STATE
)));
624 * Tell the hardware our version number.
626 i
= (_NETXEN_NIC_LINUX_MAJOR
<< 16)
627 | ((_NETXEN_NIC_LINUX_MINOR
<< 8))
628 | (_NETXEN_NIC_LINUX_SUBVERSION
);
629 writel(i
, NETXEN_CRB_NORMALIZE(adapter
, CRB_DRIVER_VERSION
));
631 /* Unlock the HW, prompting the boot sequence */
633 NETXEN_CRB_NORMALIZE(adapter
,
634 NETXEN_ROMUSB_GLB_PEGTUNE_DONE
));
635 /* Handshake with the card before we register the devices. */
636 netxen_phantom_init(adapter
, NETXEN_NIC_PEG_TUNE
);
640 * See if the firmware gave us a virtual-physical port mapping.
642 i
= readl(NETXEN_CRB_NORMALIZE(adapter
, CRB_V2P(adapter
->portnum
)));
644 physical_port
[adapter
->portnum
] = i
;
646 netif_carrier_off(netdev
);
647 netif_stop_queue(netdev
);
649 if ((err
= register_netdev(netdev
))) {
650 printk(KERN_ERR
"%s: register_netdev failed port #%d"
651 " aborting\n", netxen_nic_driver_name
,
654 goto err_out_free_dev
;
657 pci_set_drvdata(pdev
, adapter
);
659 switch (adapter
->ahw
.board_type
) {
661 printk(KERN_INFO
"%s: QUAD GbE board initialized\n",
662 netxen_nic_driver_name
);
665 case NETXEN_NIC_XGBE
:
666 printk(KERN_INFO
"%s: XGbE board initialized\n",
667 netxen_nic_driver_name
);
671 adapter
->driver_mismatch
= 0;
676 if (adapter
->portnum
== 0)
677 netxen_free_adapter_offload(adapter
);
679 err_out_free_rx_buffer
:
680 for (i
= 0; i
< MAX_RCV_CTX
; ++i
) {
681 recv_ctx
= &adapter
->recv_ctx
[i
];
682 for (ring
= 0; ring
< NUM_RCV_DESC_RINGS
; ring
++) {
683 rcv_desc
= &recv_ctx
->rcv_desc
[ring
];
684 if (rcv_desc
->rx_buf_arr
!= NULL
) {
685 vfree(rcv_desc
->rx_buf_arr
);
686 rcv_desc
->rx_buf_arr
= NULL
;
692 err_out_free_adapter
:
693 if (adapter
->flags
& NETXEN_NIC_MSI_ENABLED
)
694 pci_disable_msi(pdev
);
696 pci_set_drvdata(pdev
, NULL
);
713 pci_release_regions(pdev
);
715 err_out_disable_pdev
:
716 pci_disable_device(pdev
);
720 static void __devexit
netxen_nic_remove(struct pci_dev
*pdev
)
722 struct netxen_adapter
*adapter
;
723 struct net_device
*netdev
;
724 struct netxen_rx_buffer
*buffer
;
725 struct netxen_recv_context
*recv_ctx
;
726 struct netxen_rcv_desc_ctx
*rcv_desc
;
728 static int init_firmware_done
= 0;
730 adapter
= pci_get_drvdata(pdev
);
734 netdev
= adapter
->netdev
;
736 unregister_netdev(netdev
);
738 if (adapter
->stop_port
)
739 adapter
->stop_port(adapter
);
741 netxen_nic_disable_int(adapter
);
743 if (adapter
->is_up
== NETXEN_ADAPTER_UP_MAGIC
) {
744 init_firmware_done
++;
745 netxen_free_hw_resources(adapter
);
748 for (ctxid
= 0; ctxid
< MAX_RCV_CTX
; ++ctxid
) {
749 recv_ctx
= &adapter
->recv_ctx
[ctxid
];
750 for (ring
= 0; ring
< NUM_RCV_DESC_RINGS
; ring
++) {
751 rcv_desc
= &recv_ctx
->rcv_desc
[ring
];
752 for (i
= 0; i
< rcv_desc
->max_rx_desc_count
; ++i
) {
753 buffer
= &(rcv_desc
->rx_buf_arr
[i
]);
754 if (buffer
->state
== NETXEN_BUFFER_FREE
)
756 pci_unmap_single(pdev
, buffer
->dma
,
759 if (buffer
->skb
!= NULL
)
760 dev_kfree_skb_any(buffer
->skb
);
762 vfree(rcv_desc
->rx_buf_arr
);
766 vfree(adapter
->cmd_buf_arr
);
768 if (adapter
->portnum
== 0) {
769 if (init_firmware_done
) {
772 if (dma_watchdog_shutdown_request(adapter
) == 1)
775 if (dma_watchdog_shutdown_poll_result(adapter
) == 1)
780 printk(KERN_ERR
"%s: dma_watchdog_shutdown failed\n",
783 /* clear the register for future unloads/loads */
784 writel(0, NETXEN_CRB_NORMALIZE(adapter
, NETXEN_CAM_RAM(0x1fc)));
785 printk(KERN_INFO
"State: 0x%0x\n",
786 readl(NETXEN_CRB_NORMALIZE(adapter
, CRB_CMDPEG_STATE
)));
788 /* leave the hw in the same state as reboot */
789 writel(0, NETXEN_CRB_NORMALIZE(adapter
, CRB_CMDPEG_STATE
));
790 netxen_pinit_from_rom(adapter
, 0);
792 netxen_load_firmware(adapter
);
793 netxen_phantom_init(adapter
, NETXEN_NIC_PEG_TUNE
);
796 /* clear the register for future unloads/loads */
797 writel(0, NETXEN_CRB_NORMALIZE(adapter
, NETXEN_CAM_RAM(0x1fc)));
798 printk(KERN_INFO
"State: 0x%0x\n",
799 readl(NETXEN_CRB_NORMALIZE(adapter
, CRB_CMDPEG_STATE
)));
803 if (dma_watchdog_shutdown_request(adapter
) == 1)
806 if (dma_watchdog_shutdown_poll_result(adapter
) == 1)
811 netxen_free_adapter_offload(adapter
);
813 printk(KERN_ERR
"%s: dma_watchdog_shutdown failed\n",
819 free_irq(adapter
->irq
, adapter
);
821 if (adapter
->flags
& NETXEN_NIC_MSI_ENABLED
)
822 pci_disable_msi(pdev
);
824 iounmap(adapter
->ahw
.db_base
);
825 iounmap(adapter
->ahw
.pci_base0
);
826 iounmap(adapter
->ahw
.pci_base1
);
827 iounmap(adapter
->ahw
.pci_base2
);
829 pci_release_regions(pdev
);
830 pci_disable_device(pdev
);
831 pci_set_drvdata(pdev
, NULL
);
837 * Called when a network interface is made active
838 * @returns 0 on success, negative value on failure
840 static int netxen_nic_open(struct net_device
*netdev
)
842 struct netxen_adapter
*adapter
= (struct netxen_adapter
*)netdev
->priv
;
846 if (adapter
->is_up
!= NETXEN_ADAPTER_UP_MAGIC
) {
847 err
= netxen_init_firmware(adapter
);
849 printk(KERN_ERR
"Failed to init firmware\n");
852 netxen_nic_flash_print(adapter
);
854 /* setup all the resources for the Phantom... */
855 /* this include the descriptors for rcv, tx, and status */
856 netxen_nic_clear_stats(adapter
);
857 err
= netxen_nic_hw_resources(adapter
);
859 printk(KERN_ERR
"Error in setting hw resources:%d\n",
863 for (ctx
= 0; ctx
< MAX_RCV_CTX
; ++ctx
) {
864 for (ring
= 0; ring
< NUM_RCV_DESC_RINGS
; ring
++)
865 netxen_post_rx_buffers(adapter
, ctx
, ring
);
867 adapter
->irq
= adapter
->ahw
.pdev
->irq
;
868 err
= request_irq(adapter
->ahw
.pdev
->irq
, netxen_intr
,
869 IRQF_SHARED
|IRQF_SAMPLE_RANDOM
, netdev
->name
,
872 printk(KERN_ERR
"request_irq failed with: %d\n", err
);
873 netxen_free_hw_resources(adapter
);
877 adapter
->is_up
= NETXEN_ADAPTER_UP_MAGIC
;
879 if (!adapter
->driver_mismatch
)
880 mod_timer(&adapter
->watchdog_timer
, jiffies
);
882 napi_enable(&adapter
->napi
);
884 netxen_nic_enable_int(adapter
);
886 /* Done here again so that even if phantom sw overwrote it,
888 if (adapter
->init_port
889 && adapter
->init_port(adapter
, adapter
->portnum
) != 0) {
890 del_timer_sync(&adapter
->watchdog_timer
);
891 printk(KERN_ERR
"%s: Failed to initialize port %d\n",
892 netxen_nic_driver_name
, adapter
->portnum
);
893 napi_disable(&adapter
->napi
);
896 if (adapter
->macaddr_set
)
897 adapter
->macaddr_set(adapter
, netdev
->dev_addr
);
899 netxen_nic_set_link_parameters(adapter
);
901 netxen_nic_set_multi(netdev
);
902 if (adapter
->set_mtu
)
903 adapter
->set_mtu(adapter
, netdev
->mtu
);
905 if (!adapter
->driver_mismatch
)
906 netif_start_queue(netdev
);
912 * netxen_nic_close - Disables a network interface entry point
914 static int netxen_nic_close(struct net_device
*netdev
)
916 struct netxen_adapter
*adapter
= netdev_priv(netdev
);
918 struct netxen_cmd_buffer
*cmd_buff
;
919 struct netxen_skb_frag
*buffrag
;
921 netif_carrier_off(netdev
);
922 netif_stop_queue(netdev
);
923 napi_disable(&adapter
->napi
);
925 netxen_nic_disable_int(adapter
);
927 cmd_buff
= adapter
->cmd_buf_arr
;
928 for (i
= 0; i
< adapter
->max_tx_desc_count
; i
++) {
929 buffrag
= cmd_buff
->frag_array
;
931 pci_unmap_single(adapter
->pdev
, buffrag
->dma
,
932 buffrag
->length
, PCI_DMA_TODEVICE
);
935 for (j
= 0; j
< cmd_buff
->frag_count
; j
++) {
938 pci_unmap_page(adapter
->pdev
, buffrag
->dma
,
944 /* Free the skb we received in netxen_nic_xmit_frame */
946 dev_kfree_skb_any(cmd_buff
->skb
);
947 cmd_buff
->skb
= NULL
;
951 if (adapter
->is_up
== NETXEN_ADAPTER_UP_MAGIC
) {
952 FLUSH_SCHEDULED_WORK();
953 del_timer_sync(&adapter
->watchdog_timer
);
959 static int netxen_nic_xmit_frame(struct sk_buff
*skb
, struct net_device
*netdev
)
961 struct netxen_adapter
*adapter
= netdev_priv(netdev
);
962 struct netxen_hardware_context
*hw
= &adapter
->ahw
;
963 unsigned int first_seg_len
= skb
->len
- skb
->data_len
;
964 struct netxen_skb_frag
*buffrag
;
968 u32 saved_producer
= 0;
969 struct cmd_desc_type0
*hwdesc
;
971 struct netxen_cmd_buffer
*pbuf
= NULL
;
972 static int dropped_packet
= 0;
974 u32 local_producer
= 0;
975 u32 max_tx_desc_count
= 0;
976 u32 last_cmd_consumer
= 0;
979 adapter
->stats
.xmitcalled
++;
980 frag_count
= skb_shinfo(skb
)->nr_frags
+ 1;
982 if (unlikely(skb
->len
<= 0)) {
983 dev_kfree_skb_any(skb
);
984 adapter
->stats
.badskblen
++;
988 if (frag_count
> MAX_BUFFERS_PER_CMD
) {
989 printk("%s: %s netxen_nic_xmit_frame: frag_count (%d)"
990 "too large, can handle only %d frags\n",
991 netxen_nic_driver_name
, netdev
->name
,
992 frag_count
, MAX_BUFFERS_PER_CMD
);
993 adapter
->stats
.txdropped
++;
994 if ((++dropped_packet
& 0xff) == 0xff)
995 printk("%s: %s droppped packets = %d\n",
996 netxen_nic_driver_name
, netdev
->name
,
1003 * Everything is set up. Now, we just need to transmit it out.
1004 * Note that we have to copy the contents of buffer over to
1005 * right place. Later on, this can be optimized out by de-coupling the
1006 * producer index from the buffer index.
1008 retry_getting_window
:
1009 spin_lock_bh(&adapter
->tx_lock
);
1010 if (adapter
->total_threads
>= MAX_XMIT_PRODUCERS
) {
1011 spin_unlock_bh(&adapter
->tx_lock
);
1018 for (i
= 0; i
< 20; i
++)
1019 cpu_relax(); /*This a nop instr on i386 */
1021 goto retry_getting_window
;
1023 local_producer
= adapter
->cmd_producer
;
1024 /* There 4 fragments per descriptor */
1025 no_of_desc
= (frag_count
+ 3) >> 2;
1026 if (netdev
->features
& NETIF_F_TSO
) {
1027 if (skb_shinfo(skb
)->gso_size
> 0) {
1030 if ((ip_hdrlen(skb
) + tcp_hdrlen(skb
) +
1031 sizeof(struct ethhdr
)) >
1032 (sizeof(struct cmd_desc_type0
) - 2)) {
1037 k
= adapter
->cmd_producer
;
1038 max_tx_desc_count
= adapter
->max_tx_desc_count
;
1039 last_cmd_consumer
= adapter
->last_cmd_consumer
;
1040 if ((k
+ no_of_desc
) >=
1041 ((last_cmd_consumer
<= k
) ? last_cmd_consumer
+ max_tx_desc_count
:
1042 last_cmd_consumer
)) {
1043 netif_stop_queue(netdev
);
1044 adapter
->flags
|= NETXEN_NETDEV_STATUS
;
1045 spin_unlock_bh(&adapter
->tx_lock
);
1046 return NETDEV_TX_BUSY
;
1048 k
= get_index_range(k
, max_tx_desc_count
, no_of_desc
);
1049 adapter
->cmd_producer
= k
;
1050 adapter
->total_threads
++;
1051 adapter
->num_threads
++;
1053 spin_unlock_bh(&adapter
->tx_lock
);
1054 /* Copy the descriptors into the hardware */
1055 producer
= local_producer
;
1056 saved_producer
= producer
;
1057 hwdesc
= &hw
->cmd_desc_head
[producer
];
1058 memset(hwdesc
, 0, sizeof(struct cmd_desc_type0
));
1059 /* Take skb->data itself */
1060 pbuf
= &adapter
->cmd_buf_arr
[producer
];
1061 if ((netdev
->features
& NETIF_F_TSO
) && skb_shinfo(skb
)->gso_size
> 0) {
1062 pbuf
->mss
= skb_shinfo(skb
)->gso_size
;
1063 hwdesc
->mss
= cpu_to_le16(skb_shinfo(skb
)->gso_size
);
1068 pbuf
->total_length
= skb
->len
;
1070 pbuf
->cmd
= TX_ETHER_PKT
;
1071 pbuf
->frag_count
= frag_count
;
1072 pbuf
->port
= adapter
->portnum
;
1073 buffrag
= &pbuf
->frag_array
[0];
1074 buffrag
->dma
= pci_map_single(adapter
->pdev
, skb
->data
, first_seg_len
,
1076 buffrag
->length
= first_seg_len
;
1077 netxen_set_cmd_desc_totallength(hwdesc
, skb
->len
);
1078 netxen_set_cmd_desc_num_of_buff(hwdesc
, frag_count
);
1079 netxen_set_cmd_desc_opcode(hwdesc
, TX_ETHER_PKT
);
1081 netxen_set_cmd_desc_port(hwdesc
, adapter
->portnum
);
1082 netxen_set_cmd_desc_ctxid(hwdesc
, adapter
->portnum
);
1083 hwdesc
->buffer1_length
= cpu_to_le16(first_seg_len
);
1084 hwdesc
->addr_buffer1
= cpu_to_le64(buffrag
->dma
);
1086 for (i
= 1, k
= 1; i
< frag_count
; i
++, k
++) {
1087 struct skb_frag_struct
*frag
;
1089 unsigned long offset
;
1090 dma_addr_t temp_dma
;
1092 /* move to next desc. if there is a need */
1093 if ((i
& 0x3) == 0) {
1095 producer
= get_next_index(producer
,
1096 adapter
->max_tx_desc_count
);
1097 hwdesc
= &hw
->cmd_desc_head
[producer
];
1098 memset(hwdesc
, 0, sizeof(struct cmd_desc_type0
));
1100 frag
= &skb_shinfo(skb
)->frags
[i
- 1];
1102 offset
= frag
->page_offset
;
1105 temp_dma
= pci_map_page(adapter
->pdev
, frag
->page
, offset
,
1106 len
, PCI_DMA_TODEVICE
);
1109 buffrag
->dma
= temp_dma
;
1110 buffrag
->length
= temp_len
;
1112 DPRINTK(INFO
, "for loop. i=%d k=%d\n", i
, k
);
1115 hwdesc
->buffer1_length
= cpu_to_le16(temp_len
);
1116 hwdesc
->addr_buffer1
= cpu_to_le64(temp_dma
);
1119 hwdesc
->buffer2_length
= cpu_to_le16(temp_len
);
1120 hwdesc
->addr_buffer2
= cpu_to_le64(temp_dma
);
1123 hwdesc
->buffer3_length
= cpu_to_le16(temp_len
);
1124 hwdesc
->addr_buffer3
= cpu_to_le64(temp_dma
);
1127 hwdesc
->buffer4_length
= cpu_to_le16(temp_len
);
1128 hwdesc
->addr_buffer4
= cpu_to_le64(temp_dma
);
1133 producer
= get_next_index(producer
, adapter
->max_tx_desc_count
);
1135 /* might change opcode to TX_TCP_LSO */
1136 netxen_tso_check(adapter
, &hw
->cmd_desc_head
[saved_producer
], skb
);
1138 /* For LSO, we need to copy the MAC/IP/TCP headers into
1139 * the descriptor ring
1141 if (netxen_get_cmd_desc_opcode(&hw
->cmd_desc_head
[saved_producer
])
1143 int hdr_len
, first_hdr_len
, more_hdr
;
1144 hdr_len
= hw
->cmd_desc_head
[saved_producer
].total_hdr_length
;
1145 if (hdr_len
> (sizeof(struct cmd_desc_type0
) - 2)) {
1146 first_hdr_len
= sizeof(struct cmd_desc_type0
) - 2;
1149 first_hdr_len
= hdr_len
;
1152 /* copy the MAC/IP/TCP headers to the cmd descriptor list */
1153 hwdesc
= &hw
->cmd_desc_head
[producer
];
1155 /* copy the first 64 bytes */
1156 memcpy(((void *)hwdesc
) + 2,
1157 (void *)(skb
->data
), first_hdr_len
);
1158 producer
= get_next_index(producer
, max_tx_desc_count
);
1161 hwdesc
= &hw
->cmd_desc_head
[producer
];
1162 /* copy the next 64 bytes - should be enough except
1163 * for pathological case
1165 skb_copy_from_linear_data_offset(skb
, first_hdr_len
,
1169 producer
= get_next_index(producer
, max_tx_desc_count
);
1173 i
= netxen_get_cmd_desc_totallength(&hw
->cmd_desc_head
[saved_producer
]);
1175 hw
->cmd_desc_head
[saved_producer
].flags_opcode
=
1176 cpu_to_le16(hw
->cmd_desc_head
[saved_producer
].flags_opcode
);
1177 hw
->cmd_desc_head
[saved_producer
].num_of_buffers_total_length
=
1178 cpu_to_le32(hw
->cmd_desc_head
[saved_producer
].
1179 num_of_buffers_total_length
);
1181 spin_lock_bh(&adapter
->tx_lock
);
1182 adapter
->stats
.txbytes
+= i
;
1184 /* Code to update the adapter considering how many producer threads
1185 are currently working */
1186 if ((--adapter
->num_threads
) == 0) {
1187 /* This is the last thread */
1188 u32 crb_producer
= adapter
->cmd_producer
;
1189 netxen_nic_update_cmd_producer(adapter
, crb_producer
);
1191 adapter
->total_threads
= 0;
1194 adapter
->stats
.xmitfinished
++;
1195 spin_unlock_bh(&adapter
->tx_lock
);
1197 netdev
->trans_start
= jiffies
;
1199 DPRINTK(INFO
, "wrote CMD producer %x to phantom\n", producer
);
1201 DPRINTK(INFO
, "Done. Send\n");
1202 return NETDEV_TX_OK
;
1205 static void netxen_watchdog(unsigned long v
)
1207 struct netxen_adapter
*adapter
= (struct netxen_adapter
*)v
;
1209 SCHEDULE_WORK(&adapter
->watchdog_task
);
1212 static void netxen_tx_timeout(struct net_device
*netdev
)
1214 struct netxen_adapter
*adapter
= (struct netxen_adapter
*)
1215 netdev_priv(netdev
);
1216 SCHEDULE_WORK(&adapter
->tx_timeout_task
);
1219 static void netxen_tx_timeout_task(struct work_struct
*work
)
1221 struct netxen_adapter
*adapter
=
1222 container_of(work
, struct netxen_adapter
, tx_timeout_task
);
1224 printk(KERN_ERR
"%s %s: transmit timeout, resetting.\n",
1225 netxen_nic_driver_name
, adapter
->netdev
->name
);
1227 netxen_nic_close(adapter
->netdev
);
1228 netxen_nic_open(adapter
->netdev
);
1229 adapter
->netdev
->trans_start
= jiffies
;
1230 netif_wake_queue(adapter
->netdev
);
1234 netxen_handle_int(struct netxen_adapter
*adapter
, struct net_device
*netdev
)
1238 DPRINTK(INFO
, "Entered handle ISR\n");
1239 adapter
->stats
.ints
++;
1241 netxen_nic_disable_int(adapter
);
1243 if (netxen_nic_rx_has_work(adapter
) || netxen_nic_tx_has_work(adapter
)) {
1244 if (netif_rx_schedule_prep(netdev
, &adapter
->napi
)) {
1246 * Interrupts are already disabled.
1248 __netif_rx_schedule(netdev
, &adapter
->napi
);
1250 static unsigned int intcount
= 0;
1251 if ((++intcount
& 0xfff) == 0xfff)
1253 "%s: %s interrupt %d while in poll\n",
1254 netxen_nic_driver_name
, netdev
->name
,
1261 netxen_nic_enable_int(adapter
);
1268 * netxen_intr - Interrupt Handler
1269 * @irq: interrupt number
1270 * data points to adapter stucture (which may be handling more than 1 port
1272 irqreturn_t
netxen_intr(int irq
, void *data
)
1274 struct netxen_adapter
*adapter
;
1275 struct net_device
*netdev
;
1278 if (unlikely(!irq
)) {
1279 return IRQ_NONE
; /* Not our interrupt */
1282 adapter
= (struct netxen_adapter
*)data
;
1283 netdev
= adapter
->netdev
;
1285 if (!(adapter
->flags
& NETXEN_NIC_MSI_ENABLED
)) {
1286 our_int
= readl(NETXEN_CRB_NORMALIZE(adapter
, CRB_INT_VECTOR
));
1287 /* not our interrupt */
1288 if ((our_int
& (0x80 << adapter
->portnum
)) == 0)
1292 if (adapter
->intr_scheme
== INTR_SCHEME_PERPORT
) {
1293 /* claim interrupt */
1294 if (!(adapter
->flags
& NETXEN_NIC_MSI_ENABLED
)) {
1295 writel(our_int
& ~((u32
)(0x80 << adapter
->portnum
)),
1296 NETXEN_CRB_NORMALIZE(adapter
, CRB_INT_VECTOR
));
1300 if (netif_running(netdev
))
1301 netxen_handle_int(adapter
, netdev
);
1306 static int netxen_nic_poll(struct napi_struct
*napi
, int budget
)
1308 struct netxen_adapter
*adapter
= container_of(napi
, struct netxen_adapter
, napi
);
1309 struct net_device
*netdev
= adapter
->netdev
;
1314 DPRINTK(INFO
, "polling for %d descriptors\n", *budget
);
1317 for (ctx
= 0; ctx
< MAX_RCV_CTX
; ++ctx
) {
1319 * Fairness issue. This will give undue weight to the
1320 * receive context 0.
1324 * To avoid starvation, we give each of our receivers,
1325 * a fraction of the quota. Sometimes, it might happen that we
1326 * have enough quota to process every packet, but since all the
1327 * packets are on one context, it gets only half of the quota,
1328 * and ends up not processing it.
1330 work_done
+= netxen_process_rcv_ring(adapter
, ctx
,
1331 budget
/ MAX_RCV_CTX
);
1334 if (work_done
>= budget
&& netxen_nic_rx_has_work(adapter
) != 0)
1337 if (netxen_process_cmd_ring((unsigned long)adapter
) == 0)
1340 DPRINTK(INFO
, "new work_done: %d work_to_do: %d\n",
1341 work_done
, work_to_do
);
1343 netif_rx_complete(netdev
, napi
);
1344 netxen_nic_enable_int(adapter
);
1350 #ifdef CONFIG_NET_POLL_CONTROLLER
1351 static void netxen_nic_poll_controller(struct net_device
*netdev
)
1353 struct netxen_adapter
*adapter
= netdev_priv(netdev
);
1354 disable_irq(adapter
->irq
);
1355 netxen_intr(adapter
->irq
, adapter
);
1356 enable_irq(adapter
->irq
);
1360 static struct pci_driver netxen_driver
= {
1361 .name
= netxen_nic_driver_name
,
1362 .id_table
= netxen_pci_tbl
,
1363 .probe
= netxen_nic_probe
,
1364 .remove
= __devexit_p(netxen_nic_remove
)
1367 /* Driver Registration on NetXen card */
1369 static int __init
netxen_init_module(void)
1371 if ((netxen_workq
= create_singlethread_workqueue("netxen")) == 0)
1374 return pci_register_driver(&netxen_driver
);
1377 module_init(netxen_init_module
);
1379 static void __exit
netxen_exit_module(void)
1382 * Wait for some time to allow the dma to drain, if any.
1385 pci_unregister_driver(&netxen_driver
);
1386 destroy_workqueue(netxen_workq
);
1389 module_exit(netxen_exit_module
);