OneNAND: Write oob area with aligned size, mtd->oobsize
[linux-2.6/openmoko-kernel.git] / arch / mips / math-emu / dsemul.c
blob8079f3d1eca0be71edbc8e771fa3ec3542b742cb
1 #include <linux/compiler.h>
2 #include <linux/mm.h>
3 #include <linux/signal.h>
4 #include <linux/smp.h>
5 #include <linux/smp_lock.h>
7 #include <asm/asm.h>
8 #include <asm/bootinfo.h>
9 #include <asm/byteorder.h>
10 #include <asm/cpu.h>
11 #include <asm/inst.h>
12 #include <asm/processor.h>
13 #include <asm/uaccess.h>
14 #include <asm/branch.h>
15 #include <asm/mipsregs.h>
16 #include <asm/system.h>
17 #include <asm/cacheflush.h>
19 #include <asm/fpu_emulator.h>
21 #include "ieee754.h"
22 #include "dsemul.h"
24 /* Strap kernel emulator for full MIPS IV emulation */
26 #ifdef __mips
27 #undef __mips
28 #endif
29 #define __mips 4
32 * Emulate the arbritrary instruction ir at xcp->cp0_epc. Required when
33 * we have to emulate the instruction in a COP1 branch delay slot. Do
34 * not change cp0_epc due to the instruction
36 * According to the spec:
37 * 1) it shouldnt be a branch :-)
38 * 2) it can be a COP instruction :-(
39 * 3) if we are tring to run a protected memory space we must take
40 * special care on memory access instructions :-(
44 * "Trampoline" return routine to catch exception following
45 * execution of delay-slot instruction execution.
48 struct emuframe {
49 mips_instruction emul;
50 mips_instruction badinst;
51 mips_instruction cookie;
52 unsigned long epc;
55 int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc)
57 extern asmlinkage void handle_dsemulret(void);
58 mips_instruction *dsemul_insns;
59 struct emuframe *fr;
60 int err;
62 if (ir == 0) { /* a nop is easy */
63 regs->cp0_epc = cpc;
64 regs->cp0_cause &= ~CAUSEF_BD;
65 return 0;
67 #ifdef DSEMUL_TRACE
68 printk("dsemul %lx %lx\n", regs->cp0_epc, cpc);
70 #endif
73 * The strategy is to push the instruction onto the user stack
74 * and put a trap after it which we can catch and jump to
75 * the required address any alternative apart from full
76 * instruction emulation!!.
78 * Algorithmics used a system call instruction, and
79 * borrowed that vector. MIPS/Linux version is a bit
80 * more heavyweight in the interests of portability and
81 * multiprocessor support. For Linux we generate a
82 * an unaligned access and force an address error exception.
84 * For embedded systems (stand-alone) we prefer to use a
85 * non-existing CP1 instruction. This prevents us from emulating
86 * branches, but gives us a cleaner interface to the exception
87 * handler (single entry point).
90 /* Ensure that the two instructions are in the same cache line */
91 dsemul_insns = (mips_instruction *) ((regs->regs[29] - sizeof(struct emuframe)) & ~0x7);
92 fr = (struct emuframe *) dsemul_insns;
94 /* Verify that the stack pointer is not competely insane */
95 if (unlikely(!access_ok(VERIFY_WRITE, fr, sizeof(struct emuframe))))
96 return SIGBUS;
98 err = __put_user(ir, &fr->emul);
99 err |= __put_user((mips_instruction)BADINST, &fr->badinst);
100 err |= __put_user((mips_instruction)BD_COOKIE, &fr->cookie);
101 err |= __put_user(cpc, &fr->epc);
103 if (unlikely(err)) {
104 fpuemustats.errors++;
105 return SIGBUS;
108 regs->cp0_epc = (unsigned long) &fr->emul;
110 flush_cache_sigtramp((unsigned long)&fr->badinst);
112 return SIGILL; /* force out of emulation loop */
115 int do_dsemulret(struct pt_regs *xcp)
117 struct emuframe *fr;
118 unsigned long epc;
119 u32 insn, cookie;
120 int err = 0;
122 fr = (struct emuframe *) (xcp->cp0_epc - sizeof(mips_instruction));
125 * If we can't even access the area, something is very wrong, but we'll
126 * leave that to the default handling
128 if (!access_ok(VERIFY_READ, fr, sizeof(struct emuframe)))
129 return 0;
132 * Do some sanity checking on the stackframe:
134 * - Is the instruction pointed to by the EPC an BADINST?
135 * - Is the following memory word the BD_COOKIE?
137 err = __get_user(insn, &fr->badinst);
138 err |= __get_user(cookie, &fr->cookie);
140 if (unlikely(err || (insn != BADINST) || (cookie != BD_COOKIE))) {
141 fpuemustats.errors++;
142 return 0;
146 * At this point, we are satisfied that it's a BD emulation trap. Yes,
147 * a user might have deliberately put two malformed and useless
148 * instructions in a row in his program, in which case he's in for a
149 * nasty surprise - the next instruction will be treated as a
150 * continuation address! Alas, this seems to be the only way that we
151 * can handle signals, recursion, and longjmps() in the context of
152 * emulating the branch delay instruction.
155 #ifdef DSEMUL_TRACE
156 printk("dsemulret\n");
157 #endif
158 if (__get_user(epc, &fr->epc)) { /* Saved EPC */
159 /* This is not a good situation to be in */
160 force_sig(SIGBUS, current);
162 return 0;
165 /* Set EPC to return to post-branch instruction */
166 xcp->cp0_epc = epc;
168 return 1;