[SCSI] advansys: Remove a check for an impossible condition
[linux-2.6/mini2440.git] / mm / fremap.c
blobc395b1abf08275dc1d22a570f259f495cdb2cbc7
1 /*
2 * linux/mm/fremap.c
3 *
4 * Explicit pagetable population and nonlinear (random) mappings support.
6 * started by Ingo Molnar, Copyright (C) 2002, 2003
7 */
9 #include <linux/mm.h>
10 #include <linux/swap.h>
11 #include <linux/file.h>
12 #include <linux/mman.h>
13 #include <linux/pagemap.h>
14 #include <linux/swapops.h>
15 #include <linux/rmap.h>
16 #include <linux/module.h>
17 #include <linux/syscalls.h>
19 #include <asm/mmu_context.h>
20 #include <asm/cacheflush.h>
21 #include <asm/tlbflush.h>
23 static void zap_pte(struct mm_struct *mm, struct vm_area_struct *vma,
24 unsigned long addr, pte_t *ptep)
26 pte_t pte = *ptep;
28 if (pte_present(pte)) {
29 struct page *page;
31 flush_cache_page(vma, addr, pte_pfn(pte));
32 pte = ptep_clear_flush(vma, addr, ptep);
33 page = vm_normal_page(vma, addr, pte);
34 if (page) {
35 if (pte_dirty(pte))
36 set_page_dirty(page);
37 page_remove_rmap(page, vma);
38 page_cache_release(page);
39 update_hiwater_rss(mm);
40 dec_mm_counter(mm, file_rss);
42 } else {
43 if (!pte_file(pte))
44 free_swap_and_cache(pte_to_swp_entry(pte));
45 pte_clear_not_present_full(mm, addr, ptep, 0);
50 * Install a file pte to a given virtual memory address, release any
51 * previously existing mapping.
53 static int install_file_pte(struct mm_struct *mm, struct vm_area_struct *vma,
54 unsigned long addr, unsigned long pgoff, pgprot_t prot)
56 int err = -ENOMEM;
57 pte_t *pte;
58 spinlock_t *ptl;
60 pte = get_locked_pte(mm, addr, &ptl);
61 if (!pte)
62 goto out;
64 if (!pte_none(*pte))
65 zap_pte(mm, vma, addr, pte);
67 set_pte_at(mm, addr, pte, pgoff_to_pte(pgoff));
69 * We don't need to run update_mmu_cache() here because the "file pte"
70 * being installed by install_file_pte() is not a real pte - it's a
71 * non-present entry (like a swap entry), noting what file offset should
72 * be mapped there when there's a fault (in a non-linear vma where
73 * that's not obvious).
75 pte_unmap_unlock(pte, ptl);
76 err = 0;
77 out:
78 return err;
81 static int populate_range(struct mm_struct *mm, struct vm_area_struct *vma,
82 unsigned long addr, unsigned long size, pgoff_t pgoff)
84 int err;
86 do {
87 err = install_file_pte(mm, vma, addr, pgoff, vma->vm_page_prot);
88 if (err)
89 return err;
91 size -= PAGE_SIZE;
92 addr += PAGE_SIZE;
93 pgoff++;
94 } while (size);
96 return 0;
100 /***
101 * sys_remap_file_pages - remap arbitrary pages of a shared backing store
102 * file within an existing vma.
103 * @start: start of the remapped virtual memory range
104 * @size: size of the remapped virtual memory range
105 * @prot: new protection bits of the range
106 * @pgoff: to be mapped page of the backing store file
107 * @flags: 0 or MAP_NONBLOCKED - the later will cause no IO.
109 * this syscall works purely via pagetables, so it's the most efficient
110 * way to map the same (large) file into a given virtual window. Unlike
111 * mmap()/mremap() it does not create any new vmas. The new mappings are
112 * also safe across swapout.
114 * NOTE: the 'prot' parameter right now is ignored, and the vma's default
115 * protection is used. Arbitrary protections might be implemented in the
116 * future.
118 asmlinkage long sys_remap_file_pages(unsigned long start, unsigned long size,
119 unsigned long __prot, unsigned long pgoff, unsigned long flags)
121 struct mm_struct *mm = current->mm;
122 struct address_space *mapping;
123 unsigned long end = start + size;
124 struct vm_area_struct *vma;
125 int err = -EINVAL;
126 int has_write_lock = 0;
128 if (__prot)
129 return err;
131 * Sanitize the syscall parameters:
133 start = start & PAGE_MASK;
134 size = size & PAGE_MASK;
136 /* Does the address range wrap, or is the span zero-sized? */
137 if (start + size <= start)
138 return err;
140 /* Can we represent this offset inside this architecture's pte's? */
141 #if PTE_FILE_MAX_BITS < BITS_PER_LONG
142 if (pgoff + (size >> PAGE_SHIFT) >= (1UL << PTE_FILE_MAX_BITS))
143 return err;
144 #endif
146 /* We need down_write() to change vma->vm_flags. */
147 down_read(&mm->mmap_sem);
148 retry:
149 vma = find_vma(mm, start);
152 * Make sure the vma is shared, that it supports prefaulting,
153 * and that the remapped range is valid and fully within
154 * the single existing vma. vm_private_data is used as a
155 * swapout cursor in a VM_NONLINEAR vma.
157 if (!vma || !(vma->vm_flags & VM_SHARED))
158 goto out;
160 if (vma->vm_private_data && !(vma->vm_flags & VM_NONLINEAR))
161 goto out;
163 if (!vma->vm_flags & VM_CAN_NONLINEAR)
164 goto out;
166 if (end <= start || start < vma->vm_start || end > vma->vm_end)
167 goto out;
169 /* Must set VM_NONLINEAR before any pages are populated. */
170 if (!(vma->vm_flags & VM_NONLINEAR)) {
171 /* Don't need a nonlinear mapping, exit success */
172 if (pgoff == linear_page_index(vma, start)) {
173 err = 0;
174 goto out;
177 if (!has_write_lock) {
178 up_read(&mm->mmap_sem);
179 down_write(&mm->mmap_sem);
180 has_write_lock = 1;
181 goto retry;
183 mapping = vma->vm_file->f_mapping;
185 * page_mkclean doesn't work on nonlinear vmas, so if
186 * dirty pages need to be accounted, emulate with linear
187 * vmas.
189 if (mapping_cap_account_dirty(mapping)) {
190 unsigned long addr;
192 flags &= MAP_NONBLOCK;
193 addr = mmap_region(vma->vm_file, start, size,
194 flags, vma->vm_flags, pgoff, 1);
195 if (IS_ERR_VALUE(addr)) {
196 err = addr;
197 } else {
198 BUG_ON(addr != start);
199 err = 0;
201 goto out;
203 spin_lock(&mapping->i_mmap_lock);
204 flush_dcache_mmap_lock(mapping);
205 vma->vm_flags |= VM_NONLINEAR;
206 vma_prio_tree_remove(vma, &mapping->i_mmap);
207 vma_nonlinear_insert(vma, &mapping->i_mmap_nonlinear);
208 flush_dcache_mmap_unlock(mapping);
209 spin_unlock(&mapping->i_mmap_lock);
212 err = populate_range(mm, vma, start, size, pgoff);
213 if (!err && !(flags & MAP_NONBLOCK)) {
214 if (unlikely(has_write_lock)) {
215 downgrade_write(&mm->mmap_sem);
216 has_write_lock = 0;
218 make_pages_present(start, start+size);
222 * We can't clear VM_NONLINEAR because we'd have to do
223 * it after ->populate completes, and that would prevent
224 * downgrading the lock. (Locks can't be upgraded).
227 out:
228 if (likely(!has_write_lock))
229 up_read(&mm->mmap_sem);
230 else
231 up_write(&mm->mmap_sem);
233 return err;