[JFFS2] Correct parameter names of jffs2_compress() in comments
[linux-2.6/mini2440.git] / include / linux / firewire-cdev.h
blob0f0e271f97fa1f0fa7248cafc9c579e8be20fe00
1 /*
2 * Char device interface.
4 * Copyright (C) 2005-2006 Kristian Hoegsberg <krh@bitplanet.net>
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software Foundation,
18 * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
21 #ifndef _LINUX_FIREWIRE_CDEV_H
22 #define _LINUX_FIREWIRE_CDEV_H
24 #include <linux/ioctl.h>
25 #include <linux/types.h>
26 #include <linux/firewire-constants.h>
28 #define FW_CDEV_EVENT_BUS_RESET 0x00
29 #define FW_CDEV_EVENT_RESPONSE 0x01
30 #define FW_CDEV_EVENT_REQUEST 0x02
31 #define FW_CDEV_EVENT_ISO_INTERRUPT 0x03
33 /**
34 * struct fw_cdev_event_common - Common part of all fw_cdev_event_ types
35 * @closure: For arbitrary use by userspace
36 * @type: Discriminates the fw_cdev_event_ types
38 * This struct may be used to access generic members of all fw_cdev_event_
39 * types regardless of the specific type.
41 * Data passed in the @closure field for a request will be returned in the
42 * corresponding event. It is big enough to hold a pointer on all platforms.
43 * The ioctl used to set @closure depends on the @type of event.
45 struct fw_cdev_event_common {
46 __u64 closure;
47 __u32 type;
50 /**
51 * struct fw_cdev_event_bus_reset - Sent when a bus reset occurred
52 * @closure: See &fw_cdev_event_common; set by %FW_CDEV_IOC_GET_INFO ioctl
53 * @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_BUS_RESET
54 * @node_id: New node ID of this node
55 * @local_node_id: Node ID of the local node, i.e. of the controller
56 * @bm_node_id: Node ID of the bus manager
57 * @irm_node_id: Node ID of the iso resource manager
58 * @root_node_id: Node ID of the root node
59 * @generation: New bus generation
61 * This event is sent when the bus the device belongs to goes through a bus
62 * reset. It provides information about the new bus configuration, such as
63 * new node ID for this device, new root ID, and others.
65 struct fw_cdev_event_bus_reset {
66 __u64 closure;
67 __u32 type;
68 __u32 node_id;
69 __u32 local_node_id;
70 __u32 bm_node_id;
71 __u32 irm_node_id;
72 __u32 root_node_id;
73 __u32 generation;
76 /**
77 * struct fw_cdev_event_response - Sent when a response packet was received
78 * @closure: See &fw_cdev_event_common;
79 * set by %FW_CDEV_IOC_SEND_REQUEST ioctl
80 * @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_RESPONSE
81 * @rcode: Response code returned by the remote node
82 * @length: Data length, i.e. the response's payload size in bytes
83 * @data: Payload data, if any
85 * This event is sent when the stack receives a response to an outgoing request
86 * sent by %FW_CDEV_IOC_SEND_REQUEST ioctl. The payload data for responses
87 * carrying data (read and lock responses) follows immediately and can be
88 * accessed through the @data field.
90 struct fw_cdev_event_response {
91 __u64 closure;
92 __u32 type;
93 __u32 rcode;
94 __u32 length;
95 __u32 data[0];
98 /**
99 * struct fw_cdev_event_request - Sent on incoming request to an address region
100 * @closure: See &fw_cdev_event_common; set by %FW_CDEV_IOC_ALLOCATE ioctl
101 * @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_REQUEST
102 * @tcode: Transaction code of the incoming request
103 * @offset: The offset into the 48-bit per-node address space
104 * @handle: Reference to the kernel-side pending request
105 * @length: Data length, i.e. the request's payload size in bytes
106 * @data: Incoming data, if any
108 * This event is sent when the stack receives an incoming request to an address
109 * region registered using the %FW_CDEV_IOC_ALLOCATE ioctl. The request is
110 * guaranteed to be completely contained in the specified region. Userspace is
111 * responsible for sending the response by %FW_CDEV_IOC_SEND_RESPONSE ioctl,
112 * using the same @handle.
114 * The payload data for requests carrying data (write and lock requests)
115 * follows immediately and can be accessed through the @data field.
117 struct fw_cdev_event_request {
118 __u64 closure;
119 __u32 type;
120 __u32 tcode;
121 __u64 offset;
122 __u32 handle;
123 __u32 length;
124 __u32 data[0];
128 * struct fw_cdev_event_iso_interrupt - Sent when an iso packet was completed
129 * @closure: See &fw_cdev_event_common;
130 * set by %FW_CDEV_CREATE_ISO_CONTEXT ioctl
131 * @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_ISO_INTERRUPT
132 * @cycle: Cycle counter of the interrupt packet
133 * @header_length: Total length of following headers, in bytes
134 * @header: Stripped headers, if any
136 * This event is sent when the controller has completed an &fw_cdev_iso_packet
137 * with the %FW_CDEV_ISO_INTERRUPT bit set. In the receive case, the headers
138 * stripped of all packets up until and including the interrupt packet are
139 * returned in the @header field.
141 struct fw_cdev_event_iso_interrupt {
142 __u64 closure;
143 __u32 type;
144 __u32 cycle;
145 __u32 header_length;
146 __u32 header[0];
150 * union fw_cdev_event - Convenience union of fw_cdev_event_ types
151 * @common: Valid for all types
152 * @bus_reset: Valid if @common.type == %FW_CDEV_EVENT_BUS_RESET
153 * @response: Valid if @common.type == %FW_CDEV_EVENT_RESPONSE
154 * @request: Valid if @common.type == %FW_CDEV_EVENT_REQUEST
155 * @iso_interrupt: Valid if @common.type == %FW_CDEV_EVENT_ISO_INTERRUPT
157 * Convenience union for userspace use. Events could be read(2) into a char
158 * buffer and then cast to this union for further processing.
160 union fw_cdev_event {
161 struct fw_cdev_event_common common;
162 struct fw_cdev_event_bus_reset bus_reset;
163 struct fw_cdev_event_response response;
164 struct fw_cdev_event_request request;
165 struct fw_cdev_event_iso_interrupt iso_interrupt;
168 #define FW_CDEV_IOC_GET_INFO _IOWR('#', 0x00, struct fw_cdev_get_info)
169 #define FW_CDEV_IOC_SEND_REQUEST _IOW('#', 0x01, struct fw_cdev_send_request)
170 #define FW_CDEV_IOC_ALLOCATE _IOWR('#', 0x02, struct fw_cdev_allocate)
171 #define FW_CDEV_IOC_DEALLOCATE _IOW('#', 0x03, struct fw_cdev_deallocate)
172 #define FW_CDEV_IOC_SEND_RESPONSE _IOW('#', 0x04, struct fw_cdev_send_response)
173 #define FW_CDEV_IOC_INITIATE_BUS_RESET _IOW('#', 0x05, struct fw_cdev_initiate_bus_reset)
174 #define FW_CDEV_IOC_ADD_DESCRIPTOR _IOWR('#', 0x06, struct fw_cdev_add_descriptor)
175 #define FW_CDEV_IOC_REMOVE_DESCRIPTOR _IOW('#', 0x07, struct fw_cdev_remove_descriptor)
177 #define FW_CDEV_IOC_CREATE_ISO_CONTEXT _IOWR('#', 0x08, struct fw_cdev_create_iso_context)
178 #define FW_CDEV_IOC_QUEUE_ISO _IOWR('#', 0x09, struct fw_cdev_queue_iso)
179 #define FW_CDEV_IOC_START_ISO _IOW('#', 0x0a, struct fw_cdev_start_iso)
180 #define FW_CDEV_IOC_STOP_ISO _IOW('#', 0x0b, struct fw_cdev_stop_iso)
181 #define FW_CDEV_IOC_GET_CYCLE_TIMER _IOR('#', 0x0c, struct fw_cdev_get_cycle_timer)
183 /* FW_CDEV_VERSION History
185 * 1 Feb 18, 2007: Initial version.
187 #define FW_CDEV_VERSION 1
190 * struct fw_cdev_get_info - General purpose information ioctl
191 * @version: The version field is just a running serial number.
192 * We never break backwards compatibility, but may add more
193 * structs and ioctls in later revisions.
194 * @rom_length: If @rom is non-zero, at most rom_length bytes of configuration
195 * ROM will be copied into that user space address. In either
196 * case, @rom_length is updated with the actual length of the
197 * configuration ROM.
198 * @rom: If non-zero, address of a buffer to be filled by a copy of the
199 * local node's configuration ROM
200 * @bus_reset: If non-zero, address of a buffer to be filled by a
201 * &struct fw_cdev_event_bus_reset with the current state
202 * of the bus. This does not cause a bus reset to happen.
203 * @bus_reset_closure: Value of &closure in this and subsequent bus reset events
204 * @card: The index of the card this device belongs to
206 struct fw_cdev_get_info {
207 __u32 version;
208 __u32 rom_length;
209 __u64 rom;
210 __u64 bus_reset;
211 __u64 bus_reset_closure;
212 __u32 card;
216 * struct fw_cdev_send_request - Send an asynchronous request packet
217 * @tcode: Transaction code of the request
218 * @length: Length of outgoing payload, in bytes
219 * @offset: 48-bit offset at destination node
220 * @closure: Passed back to userspace in the response event
221 * @data: Userspace pointer to payload
222 * @generation: The bus generation where packet is valid
224 * Send a request to the device. This ioctl implements all outgoing requests.
225 * Both quadlet and block request specify the payload as a pointer to the data
226 * in the @data field. Once the transaction completes, the kernel writes an
227 * &fw_cdev_event_request event back. The @closure field is passed back to
228 * user space in the response event.
230 struct fw_cdev_send_request {
231 __u32 tcode;
232 __u32 length;
233 __u64 offset;
234 __u64 closure;
235 __u64 data;
236 __u32 generation;
240 * struct fw_cdev_send_response - Send an asynchronous response packet
241 * @rcode: Response code as determined by the userspace handler
242 * @length: Length of outgoing payload, in bytes
243 * @data: Userspace pointer to payload
244 * @handle: The handle from the &fw_cdev_event_request
246 * Send a response to an incoming request. By setting up an address range using
247 * the %FW_CDEV_IOC_ALLOCATE ioctl, userspace can listen for incoming requests. An
248 * incoming request will generate an %FW_CDEV_EVENT_REQUEST, and userspace must
249 * send a reply using this ioctl. The event has a handle to the kernel-side
250 * pending transaction, which should be used with this ioctl.
252 struct fw_cdev_send_response {
253 __u32 rcode;
254 __u32 length;
255 __u64 data;
256 __u32 handle;
260 * struct fw_cdev_allocate - Allocate a CSR address range
261 * @offset: Start offset of the address range
262 * @closure: To be passed back to userspace in request events
263 * @length: Length of the address range, in bytes
264 * @handle: Handle to the allocation, written by the kernel
266 * Allocate an address range in the 48-bit address space on the local node
267 * (the controller). This allows userspace to listen for requests with an
268 * offset within that address range. When the kernel receives a request
269 * within the range, an &fw_cdev_event_request event will be written back.
270 * The @closure field is passed back to userspace in the response event.
271 * The @handle field is an out parameter, returning a handle to the allocated
272 * range to be used for later deallocation of the range.
274 struct fw_cdev_allocate {
275 __u64 offset;
276 __u64 closure;
277 __u32 length;
278 __u32 handle;
282 * struct fw_cdev_deallocate - Free an address range allocation
283 * @handle: Handle to the address range, as returned by the kernel when the
284 * range was allocated
286 struct fw_cdev_deallocate {
287 __u32 handle;
290 #define FW_CDEV_LONG_RESET 0
291 #define FW_CDEV_SHORT_RESET 1
294 * struct fw_cdev_initiate_bus_reset - Initiate a bus reset
295 * @type: %FW_CDEV_SHORT_RESET or %FW_CDEV_LONG_RESET
297 * Initiate a bus reset for the bus this device is on. The bus reset can be
298 * either the original (long) bus reset or the arbitrated (short) bus reset
299 * introduced in 1394a-2000.
301 struct fw_cdev_initiate_bus_reset {
302 __u32 type; /* FW_CDEV_SHORT_RESET or FW_CDEV_LONG_RESET */
306 * struct fw_cdev_add_descriptor - Add contents to the local node's config ROM
307 * @immediate: If non-zero, immediate key to insert before pointer
308 * @key: Upper 8 bits of root directory pointer
309 * @data: Userspace pointer to contents of descriptor block
310 * @length: Length of descriptor block data, in bytes
311 * @handle: Handle to the descriptor, written by the kernel
313 * Add a descriptor block and optionally a preceding immediate key to the local
314 * node's configuration ROM.
316 * The @key field specifies the upper 8 bits of the descriptor root directory
317 * pointer and the @data and @length fields specify the contents. The @key
318 * should be of the form 0xXX000000. The offset part of the root directory entry
319 * will be filled in by the kernel.
321 * If not 0, the @immediate field specifies an immediate key which will be
322 * inserted before the root directory pointer.
324 * If successful, the kernel adds the descriptor and writes back a handle to the
325 * kernel-side object to be used for later removal of the descriptor block and
326 * immediate key.
328 struct fw_cdev_add_descriptor {
329 __u32 immediate;
330 __u32 key;
331 __u64 data;
332 __u32 length;
333 __u32 handle;
337 * struct fw_cdev_remove_descriptor - Remove contents from the configuration ROM
338 * @handle: Handle to the descriptor, as returned by the kernel when the
339 * descriptor was added
341 * Remove a descriptor block and accompanying immediate key from the local
342 * node's configuration ROM.
344 struct fw_cdev_remove_descriptor {
345 __u32 handle;
348 #define FW_CDEV_ISO_CONTEXT_TRANSMIT 0
349 #define FW_CDEV_ISO_CONTEXT_RECEIVE 1
352 * struct fw_cdev_create_iso_context - Create a context for isochronous IO
353 * @type: %FW_CDEV_ISO_CONTEXT_TRANSMIT or %FW_CDEV_ISO_CONTEXT_RECEIVE
354 * @header_size: Header size to strip for receive contexts
355 * @channel: Channel to bind to
356 * @speed: Speed to transmit at
357 * @closure: To be returned in &fw_cdev_event_iso_interrupt
358 * @handle: Handle to context, written back by kernel
360 * Prior to sending or receiving isochronous I/O, a context must be created.
361 * The context records information about the transmit or receive configuration
362 * and typically maps to an underlying hardware resource. A context is set up
363 * for either sending or receiving. It is bound to a specific isochronous
364 * channel.
366 * If a context was successfully created, the kernel writes back a handle to the
367 * context, which must be passed in for subsequent operations on that context.
369 struct fw_cdev_create_iso_context {
370 __u32 type;
371 __u32 header_size;
372 __u32 channel;
373 __u32 speed;
374 __u64 closure;
375 __u32 handle;
378 #define FW_CDEV_ISO_PAYLOAD_LENGTH(v) (v)
379 #define FW_CDEV_ISO_INTERRUPT (1 << 16)
380 #define FW_CDEV_ISO_SKIP (1 << 17)
381 #define FW_CDEV_ISO_SYNC (1 << 17)
382 #define FW_CDEV_ISO_TAG(v) ((v) << 18)
383 #define FW_CDEV_ISO_SY(v) ((v) << 20)
384 #define FW_CDEV_ISO_HEADER_LENGTH(v) ((v) << 24)
387 * struct fw_cdev_iso_packet - Isochronous packet
388 * @control: Contains the header length (8 uppermost bits), the sy field
389 * (4 bits), the tag field (2 bits), a sync flag (1 bit),
390 * a skip flag (1 bit), an interrupt flag (1 bit), and the
391 * payload length (16 lowermost bits)
392 * @header: Header and payload
394 * &struct fw_cdev_iso_packet is used to describe isochronous packet queues.
396 * Use the FW_CDEV_ISO_ macros to fill in @control. The sy and tag fields are
397 * specified by IEEE 1394a and IEC 61883.
399 * FIXME - finish this documentation
401 struct fw_cdev_iso_packet {
402 __u32 control;
403 __u32 header[0];
407 * struct fw_cdev_queue_iso - Queue isochronous packets for I/O
408 * @packets: Userspace pointer to packet data
409 * @data: Pointer into mmap()'ed payload buffer
410 * @size: Size of packet data in bytes
411 * @handle: Isochronous context handle
413 * Queue a number of isochronous packets for reception or transmission.
414 * This ioctl takes a pointer to an array of &fw_cdev_iso_packet structs,
415 * which describe how to transmit from or receive into a contiguous region
416 * of a mmap()'ed payload buffer. As part of the packet descriptors,
417 * a series of headers can be supplied, which will be prepended to the
418 * payload during DMA.
420 * The kernel may or may not queue all packets, but will write back updated
421 * values of the @packets, @data and @size fields, so the ioctl can be
422 * resubmitted easily.
424 struct fw_cdev_queue_iso {
425 __u64 packets;
426 __u64 data;
427 __u32 size;
428 __u32 handle;
431 #define FW_CDEV_ISO_CONTEXT_MATCH_TAG0 1
432 #define FW_CDEV_ISO_CONTEXT_MATCH_TAG1 2
433 #define FW_CDEV_ISO_CONTEXT_MATCH_TAG2 4
434 #define FW_CDEV_ISO_CONTEXT_MATCH_TAG3 8
435 #define FW_CDEV_ISO_CONTEXT_MATCH_ALL_TAGS 15
438 * struct fw_cdev_start_iso - Start an isochronous transmission or reception
439 * @cycle: Cycle in which to start I/O. If @cycle is greater than or
440 * equal to 0, the I/O will start on that cycle.
441 * @sync: Determines the value to wait for for receive packets that have
442 * the %FW_CDEV_ISO_SYNC bit set
443 * @tags: Tag filter bit mask. Only valid for isochronous reception.
444 * Determines the tag values for which packets will be accepted.
445 * Use FW_CDEV_ISO_CONTEXT_MATCH_ macros to set @tags.
446 * @handle: Isochronous context handle within which to transmit or receive
448 struct fw_cdev_start_iso {
449 __s32 cycle;
450 __u32 sync;
451 __u32 tags;
452 __u32 handle;
456 * struct fw_cdev_stop_iso - Stop an isochronous transmission or reception
457 * @handle: Handle of isochronous context to stop
459 struct fw_cdev_stop_iso {
460 __u32 handle;
464 * struct fw_cdev_get_cycle_timer - read cycle timer register
465 * @local_time: system time, in microseconds since the Epoch
466 * @cycle_timer: isochronous cycle timer, as per OHCI 1.1 clause 5.13
468 * The %FW_CDEV_IOC_GET_CYCLE_TIMER ioctl reads the isochronous cycle timer
469 * and also the system clock. This allows to express the receive time of an
470 * isochronous packet as a system time with microsecond accuracy.
472 struct fw_cdev_get_cycle_timer {
473 __u64 local_time;
474 __u32 cycle_timer;
477 #endif /* _LINUX_FIREWIRE_CDEV_H */