2 * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved.
4 * This program is free software; you can distribute it and/or modify it
5 * under the terms of the GNU General Public License (Version 2) as
6 * published by the Free Software Foundation.
8 * This program is distributed in the hope it will be useful, but WITHOUT
9 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
10 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
13 * You should have received a copy of the GNU General Public License along
14 * with this program; if not, write to the Free Software Foundation, Inc.,
15 * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
21 * Provides support for loading a MIPS SP program on VPE1.
22 * The SP enviroment is rather simple, no tlb's. It needs to be relocatable
23 * (or partially linked). You should initialise your stack in the startup
24 * code. This loader looks for the symbol __start and sets up
25 * execution to resume from there. The MIPS SDE kit contains suitable examples.
27 * To load and run, simply cat a SP 'program file' to /dev/vpe1.
28 * i.e cat spapp >/dev/vpe1.
30 #include <linux/kernel.h>
31 #include <linux/device.h>
32 #include <linux/module.h>
34 #include <linux/init.h>
35 #include <asm/uaccess.h>
36 #include <linux/slab.h>
37 #include <linux/list.h>
38 #include <linux/vmalloc.h>
39 #include <linux/elf.h>
40 #include <linux/seq_file.h>
41 #include <linux/smp_lock.h>
42 #include <linux/syscalls.h>
43 #include <linux/moduleloader.h>
44 #include <linux/interrupt.h>
45 #include <linux/poll.h>
46 #include <linux/bootmem.h>
47 #include <asm/mipsregs.h>
48 #include <asm/mipsmtregs.h>
49 #include <asm/cacheflush.h>
50 #include <asm/atomic.h>
52 #include <asm/mips_mt.h>
53 #include <asm/processor.h>
54 #include <asm/system.h>
58 typedef void *vpe_handle
;
60 #ifndef ARCH_SHF_SMALL
61 #define ARCH_SHF_SMALL 0
64 /* If this is set, the section belongs in the init part of the module */
65 #define INIT_OFFSET_MASK (1UL << (BITS_PER_LONG-1))
68 * The number of TCs and VPEs physically available on the core
70 static int hw_tcs
, hw_vpes
;
71 static char module_name
[] = "vpe";
73 static const int minor
= 1; /* fixed for now */
75 #ifdef CONFIG_MIPS_APSP_KSPD
76 static struct kspd_notifications kspd_events
;
77 static int kspd_events_reqd
;
80 /* grab the likely amount of memory we will need. */
81 #ifdef CONFIG_MIPS_VPE_LOADER_TOM
82 #define P_SIZE (2 * 1024 * 1024)
84 /* add an overhead to the max kmalloc size for non-striped symbols/etc */
85 #define P_SIZE (256 * 1024)
88 extern unsigned long physical_memsize
;
91 #define VPE_PATH_MAX 256
107 enum vpe_state state
;
109 /* (device) minor associated with this vpe */
112 /* elfloader stuff */
117 unsigned int uid
, gid
;
118 char cwd
[VPE_PATH_MAX
];
120 unsigned long __start
;
122 /* tc's associated with this vpe */
125 /* The list of vpe's */
126 struct list_head list
;
128 /* shared symbol address */
131 /* the list of who wants to know when something major happens */
132 struct list_head notify
;
141 struct vpe
*pvpe
; /* parent VPE */
142 struct list_head tc
; /* The list of TC's with this VPE */
143 struct list_head list
; /* The global list of tc's */
147 spinlock_t vpe_list_lock
;
148 struct list_head vpe_list
; /* Virtual processing elements */
149 spinlock_t tc_list_lock
;
150 struct list_head tc_list
; /* Thread contexts */
152 .vpe_list_lock
= SPIN_LOCK_UNLOCKED
,
153 .vpe_list
= LIST_HEAD_INIT(vpecontrol
.vpe_list
),
154 .tc_list_lock
= SPIN_LOCK_UNLOCKED
,
155 .tc_list
= LIST_HEAD_INIT(vpecontrol
.tc_list
)
158 static void release_progmem(void *ptr
);
160 /* get the vpe associated with this minor */
161 static struct vpe
*get_vpe(int minor
)
169 spin_lock(&vpecontrol
.vpe_list_lock
);
170 list_for_each_entry(v
, &vpecontrol
.vpe_list
, list
) {
171 if (v
->minor
== minor
) {
176 spin_unlock(&vpecontrol
.vpe_list_lock
);
181 /* get the vpe associated with this minor */
182 static struct tc
*get_tc(int index
)
187 spin_lock(&vpecontrol
.tc_list_lock
);
188 list_for_each_entry(t
, &vpecontrol
.tc_list
, list
) {
189 if (t
->index
== index
) {
194 spin_unlock(&vpecontrol
.tc_list_lock
);
199 /* allocate a vpe and associate it with this minor (or index) */
200 static struct vpe
*alloc_vpe(int minor
)
204 if ((v
= kzalloc(sizeof(struct vpe
), GFP_KERNEL
)) == NULL
)
207 INIT_LIST_HEAD(&v
->tc
);
208 spin_lock(&vpecontrol
.vpe_list_lock
);
209 list_add_tail(&v
->list
, &vpecontrol
.vpe_list
);
210 spin_unlock(&vpecontrol
.vpe_list_lock
);
212 INIT_LIST_HEAD(&v
->notify
);
218 /* allocate a tc. At startup only tc0 is running, all other can be halted. */
219 static struct tc
*alloc_tc(int index
)
223 if ((tc
= kzalloc(sizeof(struct tc
), GFP_KERNEL
)) == NULL
)
226 INIT_LIST_HEAD(&tc
->tc
);
229 spin_lock(&vpecontrol
.tc_list_lock
);
230 list_add_tail(&tc
->list
, &vpecontrol
.tc_list
);
231 spin_unlock(&vpecontrol
.tc_list_lock
);
237 /* clean up and free everything */
238 static void release_vpe(struct vpe
*v
)
246 static void __maybe_unused
dump_mtregs(void)
250 val
= read_c0_config3();
251 printk("config3 0x%lx MT %ld\n", val
,
252 (val
& CONFIG3_MT
) >> CONFIG3_MT_SHIFT
);
254 val
= read_c0_mvpcontrol();
255 printk("MVPControl 0x%lx, STLB %ld VPC %ld EVP %ld\n", val
,
256 (val
& MVPCONTROL_STLB
) >> MVPCONTROL_STLB_SHIFT
,
257 (val
& MVPCONTROL_VPC
) >> MVPCONTROL_VPC_SHIFT
,
258 (val
& MVPCONTROL_EVP
));
260 val
= read_c0_mvpconf0();
261 printk("mvpconf0 0x%lx, PVPE %ld PTC %ld M %ld\n", val
,
262 (val
& MVPCONF0_PVPE
) >> MVPCONF0_PVPE_SHIFT
,
263 val
& MVPCONF0_PTC
, (val
& MVPCONF0_M
) >> MVPCONF0_M_SHIFT
);
266 /* Find some VPE program space */
267 static void *alloc_progmem(unsigned long len
)
271 #ifdef CONFIG_MIPS_VPE_LOADER_TOM
273 * This means you must tell Linux to use less memory than you
274 * physically have, for example by passing a mem= boot argument.
276 addr
= pfn_to_kaddr(max_low_pfn
);
277 memset(addr
, 0, len
);
279 /* simple grab some mem for now */
280 addr
= kzalloc(len
, GFP_KERNEL
);
286 static void release_progmem(void *ptr
)
288 #ifndef CONFIG_MIPS_VPE_LOADER_TOM
293 /* Update size with this section: return offset. */
294 static long get_offset(unsigned long *size
, Elf_Shdr
* sechdr
)
298 ret
= ALIGN(*size
, sechdr
->sh_addralign
? : 1);
299 *size
= ret
+ sechdr
->sh_size
;
303 /* Lay out the SHF_ALLOC sections in a way not dissimilar to how ld
304 might -- code, read-only data, read-write data, small data. Tally
305 sizes, and place the offsets into sh_entsize fields: high bit means it
307 static void layout_sections(struct module
*mod
, const Elf_Ehdr
* hdr
,
308 Elf_Shdr
* sechdrs
, const char *secstrings
)
310 static unsigned long const masks
[][2] = {
311 /* NOTE: all executable code must be the first section
312 * in this array; otherwise modify the text_size
313 * finder in the two loops below */
314 {SHF_EXECINSTR
| SHF_ALLOC
, ARCH_SHF_SMALL
},
315 {SHF_ALLOC
, SHF_WRITE
| ARCH_SHF_SMALL
},
316 {SHF_WRITE
| SHF_ALLOC
, ARCH_SHF_SMALL
},
317 {ARCH_SHF_SMALL
| SHF_ALLOC
, 0}
321 for (i
= 0; i
< hdr
->e_shnum
; i
++)
322 sechdrs
[i
].sh_entsize
= ~0UL;
324 for (m
= 0; m
< ARRAY_SIZE(masks
); ++m
) {
325 for (i
= 0; i
< hdr
->e_shnum
; ++i
) {
326 Elf_Shdr
*s
= &sechdrs
[i
];
328 // || strncmp(secstrings + s->sh_name, ".init", 5) == 0)
329 if ((s
->sh_flags
& masks
[m
][0]) != masks
[m
][0]
330 || (s
->sh_flags
& masks
[m
][1])
331 || s
->sh_entsize
!= ~0UL)
334 get_offset((unsigned long *)&mod
->core_size
, s
);
338 mod
->core_text_size
= mod
->core_size
;
344 /* from module-elf32.c, but subverted a little */
347 struct mips_hi16
*next
;
352 static struct mips_hi16
*mips_hi16_list
;
353 static unsigned int gp_offs
, gp_addr
;
355 static int apply_r_mips_none(struct module
*me
, uint32_t *location
,
361 static int apply_r_mips_gprel16(struct module
*me
, uint32_t *location
,
366 if( !(*location
& 0xffff) ) {
367 rel
= (int)v
- gp_addr
;
370 /* .sbss + gp(relative) + offset */
372 rel
= (int)(short)((int)v
+ gp_offs
+
373 (int)(short)(*location
& 0xffff) - gp_addr
);
376 if( (rel
> 32768) || (rel
< -32768) ) {
377 printk(KERN_DEBUG
"VPE loader: apply_r_mips_gprel16: "
378 "relative address 0x%x out of range of gp register\n",
383 *location
= (*location
& 0xffff0000) | (rel
& 0xffff);
388 static int apply_r_mips_pc16(struct module
*me
, uint32_t *location
,
392 rel
= (((unsigned int)v
- (unsigned int)location
));
393 rel
>>= 2; // because the offset is in _instructions_ not bytes.
394 rel
-= 1; // and one instruction less due to the branch delay slot.
396 if( (rel
> 32768) || (rel
< -32768) ) {
397 printk(KERN_DEBUG
"VPE loader: "
398 "apply_r_mips_pc16: relative address out of range 0x%x\n", rel
);
402 *location
= (*location
& 0xffff0000) | (rel
& 0xffff);
407 static int apply_r_mips_32(struct module
*me
, uint32_t *location
,
415 static int apply_r_mips_26(struct module
*me
, uint32_t *location
,
419 printk(KERN_DEBUG
"VPE loader: apply_r_mips_26 "
420 " unaligned relocation\n");
425 * Not desperately convinced this is a good check of an overflow condition
426 * anyway. But it gets in the way of handling undefined weak symbols which
427 * we want to set to zero.
428 * if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
430 * "module %s: relocation overflow\n",
436 *location
= (*location
& ~0x03ffffff) |
437 ((*location
+ (v
>> 2)) & 0x03ffffff);
441 static int apply_r_mips_hi16(struct module
*me
, uint32_t *location
,
447 * We cannot relocate this one now because we don't know the value of
448 * the carry we need to add. Save the information, and let LO16 do the
451 n
= kmalloc(sizeof *n
, GFP_KERNEL
);
457 n
->next
= mips_hi16_list
;
463 static int apply_r_mips_lo16(struct module
*me
, uint32_t *location
,
466 unsigned long insnlo
= *location
;
467 Elf32_Addr val
, vallo
;
468 struct mips_hi16
*l
, *next
;
470 /* Sign extend the addend we extract from the lo insn. */
471 vallo
= ((insnlo
& 0xffff) ^ 0x8000) - 0x8000;
473 if (mips_hi16_list
!= NULL
) {
480 * The value for the HI16 had best be the same.
483 printk(KERN_DEBUG
"VPE loader: "
484 "apply_r_mips_lo16/hi16: \t"
485 "inconsistent value information\n");
490 * Do the HI16 relocation. Note that we actually don't
491 * need to know anything about the LO16 itself, except
492 * where to find the low 16 bits of the addend needed
496 val
= ((insn
& 0xffff) << 16) + vallo
;
500 * Account for the sign extension that will happen in
503 val
= ((val
>> 16) + ((val
& 0x8000) != 0)) & 0xffff;
505 insn
= (insn
& ~0xffff) | val
;
513 mips_hi16_list
= NULL
;
517 * Ok, we're done with the HI16 relocs. Now deal with the LO16.
520 insnlo
= (insnlo
& ~0xffff) | (val
& 0xffff);
531 mips_hi16_list
= NULL
;
536 static int (*reloc_handlers
[]) (struct module
*me
, uint32_t *location
,
538 [R_MIPS_NONE
] = apply_r_mips_none
,
539 [R_MIPS_32
] = apply_r_mips_32
,
540 [R_MIPS_26
] = apply_r_mips_26
,
541 [R_MIPS_HI16
] = apply_r_mips_hi16
,
542 [R_MIPS_LO16
] = apply_r_mips_lo16
,
543 [R_MIPS_GPREL16
] = apply_r_mips_gprel16
,
544 [R_MIPS_PC16
] = apply_r_mips_pc16
547 static char *rstrs
[] = {
548 [R_MIPS_NONE
] = "MIPS_NONE",
549 [R_MIPS_32
] = "MIPS_32",
550 [R_MIPS_26
] = "MIPS_26",
551 [R_MIPS_HI16
] = "MIPS_HI16",
552 [R_MIPS_LO16
] = "MIPS_LO16",
553 [R_MIPS_GPREL16
] = "MIPS_GPREL16",
554 [R_MIPS_PC16
] = "MIPS_PC16"
557 static int apply_relocations(Elf32_Shdr
*sechdrs
,
559 unsigned int symindex
,
563 Elf32_Rel
*rel
= (void *) sechdrs
[relsec
].sh_addr
;
570 for (i
= 0; i
< sechdrs
[relsec
].sh_size
/ sizeof(*rel
); i
++) {
571 Elf32_Word r_info
= rel
[i
].r_info
;
573 /* This is where to make the change */
574 location
= (void *)sechdrs
[sechdrs
[relsec
].sh_info
].sh_addr
576 /* This is the symbol it is referring to */
577 sym
= (Elf32_Sym
*)sechdrs
[symindex
].sh_addr
578 + ELF32_R_SYM(r_info
);
580 if (!sym
->st_value
) {
581 printk(KERN_DEBUG
"%s: undefined weak symbol %s\n",
582 me
->name
, strtab
+ sym
->st_name
);
583 /* just print the warning, dont barf */
588 res
= reloc_handlers
[ELF32_R_TYPE(r_info
)](me
, location
, v
);
590 char *r
= rstrs
[ELF32_R_TYPE(r_info
)];
591 printk(KERN_WARNING
"VPE loader: .text+0x%x "
592 "relocation type %s for symbol \"%s\" failed\n",
593 rel
[i
].r_offset
, r
? r
: "UNKNOWN",
594 strtab
+ sym
->st_name
);
602 static inline void save_gp_address(unsigned int secbase
, unsigned int rel
)
604 gp_addr
= secbase
+ rel
;
605 gp_offs
= gp_addr
- (secbase
& 0xffff0000);
607 /* end module-elf32.c */
611 /* Change all symbols so that sh_value encodes the pointer directly. */
612 static void simplify_symbols(Elf_Shdr
* sechdrs
,
613 unsigned int symindex
,
615 const char *secstrings
,
616 unsigned int nsecs
, struct module
*mod
)
618 Elf_Sym
*sym
= (void *)sechdrs
[symindex
].sh_addr
;
619 unsigned long secbase
, bssbase
= 0;
620 unsigned int i
, n
= sechdrs
[symindex
].sh_size
/ sizeof(Elf_Sym
);
623 /* find the .bss section for COMMON symbols */
624 for (i
= 0; i
< nsecs
; i
++) {
625 if (strncmp(secstrings
+ sechdrs
[i
].sh_name
, ".bss", 4) == 0) {
626 bssbase
= sechdrs
[i
].sh_addr
;
631 for (i
= 1; i
< n
; i
++) {
632 switch (sym
[i
].st_shndx
) {
634 /* Allocate space for the symbol in the .bss section.
635 st_value is currently size.
636 We want it to have the address of the symbol. */
638 size
= sym
[i
].st_value
;
639 sym
[i
].st_value
= bssbase
;
645 /* Don't need to do anything */
652 case SHN_MIPS_SCOMMON
:
653 printk(KERN_DEBUG
"simplify_symbols: ignoring SHN_MIPS_SCOMMON "
654 "symbol <%s> st_shndx %d\n", strtab
+ sym
[i
].st_name
,
660 secbase
= sechdrs
[sym
[i
].st_shndx
].sh_addr
;
662 if (strncmp(strtab
+ sym
[i
].st_name
, "_gp", 3) == 0) {
663 save_gp_address(secbase
, sym
[i
].st_value
);
666 sym
[i
].st_value
+= secbase
;
672 #ifdef DEBUG_ELFLOADER
673 static void dump_elfsymbols(Elf_Shdr
* sechdrs
, unsigned int symindex
,
674 const char *strtab
, struct module
*mod
)
676 Elf_Sym
*sym
= (void *)sechdrs
[symindex
].sh_addr
;
677 unsigned int i
, n
= sechdrs
[symindex
].sh_size
/ sizeof(Elf_Sym
);
679 printk(KERN_DEBUG
"dump_elfsymbols: n %d\n", n
);
680 for (i
= 1; i
< n
; i
++) {
681 printk(KERN_DEBUG
" i %d name <%s> 0x%x\n", i
,
682 strtab
+ sym
[i
].st_name
, sym
[i
].st_value
);
687 /* We are prepared so configure and start the VPE... */
688 static int vpe_run(struct vpe
* v
)
690 unsigned long flags
, val
, dmt_flag
;
691 struct vpe_notifications
*n
;
692 unsigned int vpeflags
;
695 /* check we are the Master VPE */
696 local_irq_save(flags
);
697 val
= read_c0_vpeconf0();
698 if (!(val
& VPECONF0_MVP
)) {
700 "VPE loader: only Master VPE's are allowed to configure MT\n");
701 local_irq_restore(flags
);
709 if (!list_empty(&v
->tc
)) {
710 if ((t
= list_entry(v
->tc
.next
, struct tc
, tc
)) == NULL
) {
713 local_irq_restore(flags
);
716 "VPE loader: TC %d is already in use.\n",
723 local_irq_restore(flags
);
726 "VPE loader: No TC's associated with VPE %d\n",
732 /* Put MVPE's into 'configuration state' */
733 set_c0_mvpcontrol(MVPCONTROL_VPC
);
737 /* should check it is halted, and not activated */
738 if ((read_tc_c0_tcstatus() & TCSTATUS_A
) || !(read_tc_c0_tchalt() & TCHALT_H
)) {
741 local_irq_restore(flags
);
743 printk(KERN_WARNING
"VPE loader: TC %d is already active!\n",
749 /* Write the address we want it to start running from in the TCPC register. */
750 write_tc_c0_tcrestart((unsigned long)v
->__start
);
751 write_tc_c0_tccontext((unsigned long)0);
754 * Mark the TC as activated, not interrupt exempt and not dynamically
757 val
= read_tc_c0_tcstatus();
758 val
= (val
& ~(TCSTATUS_DA
| TCSTATUS_IXMT
)) | TCSTATUS_A
;
759 write_tc_c0_tcstatus(val
);
761 write_tc_c0_tchalt(read_tc_c0_tchalt() & ~TCHALT_H
);
764 * The sde-kit passes 'memsize' to __start in $a3, so set something
765 * here... Or set $a3 to zero and define DFLT_STACK_SIZE and
766 * DFLT_HEAP_SIZE when you compile your program
769 mttgpr(7, physical_memsize
);
773 * bind the TC to VPE 1 as late as possible so we only have the final
774 * VPE registers to set up, and so an EJTAG probe can trigger on it
776 write_tc_c0_tcbind((read_tc_c0_tcbind() & ~TCBIND_CURVPE
) | 1);
778 write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~(VPECONF0_VPA
));
780 back_to_back_c0_hazard();
782 /* Set up the XTC bit in vpeconf0 to point at our tc */
783 write_vpe_c0_vpeconf0( (read_vpe_c0_vpeconf0() & ~(VPECONF0_XTC
))
784 | (t
->index
<< VPECONF0_XTC_SHIFT
));
786 back_to_back_c0_hazard();
788 /* enable this VPE */
789 write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA
);
791 /* clear out any left overs from a previous program */
792 write_vpe_c0_status(0);
793 write_vpe_c0_cause(0);
795 /* take system out of configuration state */
796 clear_c0_mvpcontrol(MVPCONTROL_VPC
);
799 * SMTC/SMVP kernels manage VPE enable independently,
800 * but uniprocessor kernels need to turn it on, even
801 * if that wasn't the pre-dvpe() state.
809 local_irq_restore(flags
);
811 list_for_each_entry(n
, &v
->notify
, list
)
817 static int find_vpe_symbols(struct vpe
* v
, Elf_Shdr
* sechdrs
,
818 unsigned int symindex
, const char *strtab
,
821 Elf_Sym
*sym
= (void *)sechdrs
[symindex
].sh_addr
;
822 unsigned int i
, n
= sechdrs
[symindex
].sh_size
/ sizeof(Elf_Sym
);
824 for (i
= 1; i
< n
; i
++) {
825 if (strcmp(strtab
+ sym
[i
].st_name
, "__start") == 0) {
826 v
->__start
= sym
[i
].st_value
;
829 if (strcmp(strtab
+ sym
[i
].st_name
, "vpe_shared") == 0) {
830 v
->shared_ptr
= (void *)sym
[i
].st_value
;
834 if ( (v
->__start
== 0) || (v
->shared_ptr
== NULL
))
841 * Allocates a VPE with some program code space(the load address), copies the
842 * contents of the program (p)buffer performing relocatations/etc, free's it
845 static int vpe_elfload(struct vpe
* v
)
850 char *secstrings
, *strtab
= NULL
;
851 unsigned int len
, i
, symindex
= 0, strindex
= 0, relocate
= 0;
852 struct module mod
; // so we can re-use the relocations code
854 memset(&mod
, 0, sizeof(struct module
));
855 strcpy(mod
.name
, "VPE loader");
857 hdr
= (Elf_Ehdr
*) v
->pbuffer
;
860 /* Sanity checks against insmoding binaries or wrong arch,
862 if (memcmp(hdr
->e_ident
, ELFMAG
, SELFMAG
) != 0
863 || (hdr
->e_type
!= ET_REL
&& hdr
->e_type
!= ET_EXEC
)
864 || !elf_check_arch(hdr
)
865 || hdr
->e_shentsize
!= sizeof(*sechdrs
)) {
867 "VPE loader: program wrong arch or weird elf version\n");
872 if (hdr
->e_type
== ET_REL
)
875 if (len
< hdr
->e_shoff
+ hdr
->e_shnum
* sizeof(Elf_Shdr
)) {
876 printk(KERN_ERR
"VPE loader: program length %u truncated\n",
882 /* Convenience variables */
883 sechdrs
= (void *)hdr
+ hdr
->e_shoff
;
884 secstrings
= (void *)hdr
+ sechdrs
[hdr
->e_shstrndx
].sh_offset
;
885 sechdrs
[0].sh_addr
= 0;
887 /* And these should exist, but gcc whinges if we don't init them */
888 symindex
= strindex
= 0;
891 for (i
= 1; i
< hdr
->e_shnum
; i
++) {
892 if (sechdrs
[i
].sh_type
!= SHT_NOBITS
893 && len
< sechdrs
[i
].sh_offset
+ sechdrs
[i
].sh_size
) {
894 printk(KERN_ERR
"VPE program length %u truncated\n",
899 /* Mark all sections sh_addr with their address in the
901 sechdrs
[i
].sh_addr
= (size_t) hdr
+ sechdrs
[i
].sh_offset
;
903 /* Internal symbols and strings. */
904 if (sechdrs
[i
].sh_type
== SHT_SYMTAB
) {
906 strindex
= sechdrs
[i
].sh_link
;
907 strtab
= (char *)hdr
+ sechdrs
[strindex
].sh_offset
;
910 layout_sections(&mod
, hdr
, sechdrs
, secstrings
);
913 v
->load_addr
= alloc_progmem(mod
.core_size
);
917 pr_info("VPE loader: loading to %p\n", v
->load_addr
);
920 for (i
= 0; i
< hdr
->e_shnum
; i
++) {
923 if (!(sechdrs
[i
].sh_flags
& SHF_ALLOC
))
926 dest
= v
->load_addr
+ sechdrs
[i
].sh_entsize
;
928 if (sechdrs
[i
].sh_type
!= SHT_NOBITS
)
929 memcpy(dest
, (void *)sechdrs
[i
].sh_addr
,
931 /* Update sh_addr to point to copy in image. */
932 sechdrs
[i
].sh_addr
= (unsigned long)dest
;
934 printk(KERN_DEBUG
" section sh_name %s sh_addr 0x%x\n",
935 secstrings
+ sechdrs
[i
].sh_name
, sechdrs
[i
].sh_addr
);
938 /* Fix up syms, so that st_value is a pointer to location. */
939 simplify_symbols(sechdrs
, symindex
, strtab
, secstrings
,
942 /* Now do relocations. */
943 for (i
= 1; i
< hdr
->e_shnum
; i
++) {
944 const char *strtab
= (char *)sechdrs
[strindex
].sh_addr
;
945 unsigned int info
= sechdrs
[i
].sh_info
;
947 /* Not a valid relocation section? */
948 if (info
>= hdr
->e_shnum
)
951 /* Don't bother with non-allocated sections */
952 if (!(sechdrs
[info
].sh_flags
& SHF_ALLOC
))
955 if (sechdrs
[i
].sh_type
== SHT_REL
)
956 err
= apply_relocations(sechdrs
, strtab
, symindex
, i
,
958 else if (sechdrs
[i
].sh_type
== SHT_RELA
)
959 err
= apply_relocate_add(sechdrs
, strtab
, symindex
, i
,
966 struct elf_phdr
*phdr
= (struct elf_phdr
*) ((char *)hdr
+ hdr
->e_phoff
);
968 for (i
= 0; i
< hdr
->e_phnum
; i
++) {
969 if (phdr
->p_type
== PT_LOAD
) {
970 memcpy((void *)phdr
->p_paddr
,
971 (char *)hdr
+ phdr
->p_offset
,
973 memset((void *)phdr
->p_paddr
+ phdr
->p_filesz
,
974 0, phdr
->p_memsz
- phdr
->p_filesz
);
979 for (i
= 0; i
< hdr
->e_shnum
; i
++) {
980 /* Internal symbols and strings. */
981 if (sechdrs
[i
].sh_type
== SHT_SYMTAB
) {
983 strindex
= sechdrs
[i
].sh_link
;
984 strtab
= (char *)hdr
+ sechdrs
[strindex
].sh_offset
;
986 /* mark the symtab's address for when we try to find the
988 sechdrs
[i
].sh_addr
= (size_t) hdr
+ sechdrs
[i
].sh_offset
;
993 /* make sure it's physically written out */
994 flush_icache_range((unsigned long)v
->load_addr
,
995 (unsigned long)v
->load_addr
+ v
->len
);
997 if ((find_vpe_symbols(v
, sechdrs
, symindex
, strtab
, &mod
)) < 0) {
998 if (v
->__start
== 0) {
999 printk(KERN_WARNING
"VPE loader: program does not contain "
1000 "a __start symbol\n");
1004 if (v
->shared_ptr
== NULL
)
1005 printk(KERN_WARNING
"VPE loader: "
1006 "program does not contain vpe_shared symbol.\n"
1007 " Unable to use AMVP (AP/SP) facilities.\n");
1010 printk(" elf loaded\n");
1014 static void cleanup_tc(struct tc
*tc
)
1016 unsigned long flags
;
1017 unsigned int mtflags
, vpflags
;
1020 local_irq_save(flags
);
1023 /* Put MVPE's into 'configuration state' */
1024 set_c0_mvpcontrol(MVPCONTROL_VPC
);
1027 tmp
= read_tc_c0_tcstatus();
1029 /* mark not allocated and not dynamically allocatable */
1030 tmp
&= ~(TCSTATUS_A
| TCSTATUS_DA
);
1031 tmp
|= TCSTATUS_IXMT
; /* interrupt exempt */
1032 write_tc_c0_tcstatus(tmp
);
1034 write_tc_c0_tchalt(TCHALT_H
);
1037 /* bind it to anything other than VPE1 */
1038 // write_tc_c0_tcbind(read_tc_c0_tcbind() & ~TCBIND_CURVPE); // | TCBIND_CURVPE
1040 clear_c0_mvpcontrol(MVPCONTROL_VPC
);
1043 local_irq_restore(flags
);
1046 static int getcwd(char *buff
, int size
)
1048 mm_segment_t old_fs
;
1054 ret
= sys_getcwd(buff
, size
);
1061 /* checks VPE is unused and gets ready to load program */
1062 static int vpe_open(struct inode
*inode
, struct file
*filp
)
1064 enum vpe_state state
;
1065 struct vpe_notifications
*not;
1069 if (minor
!= iminor(inode
)) {
1070 /* assume only 1 device at the moment. */
1071 pr_warning("VPE loader: only vpe1 is supported\n");
1076 if ((v
= get_vpe(tclimit
)) == NULL
) {
1077 pr_warning("VPE loader: unable to get vpe\n");
1082 state
= xchg(&v
->state
, VPE_STATE_INUSE
);
1083 if (state
!= VPE_STATE_UNUSED
) {
1084 printk(KERN_DEBUG
"VPE loader: tc in use dumping regs\n");
1086 list_for_each_entry(not, &v
->notify
, list
) {
1090 release_progmem(v
->load_addr
);
1091 cleanup_tc(get_tc(tclimit
));
1094 /* this of-course trashes what was there before... */
1095 v
->pbuffer
= vmalloc(P_SIZE
);
1097 v
->load_addr
= NULL
;
1100 v
->uid
= filp
->f_cred
->fsuid
;
1101 v
->gid
= filp
->f_cred
->fsgid
;
1103 #ifdef CONFIG_MIPS_APSP_KSPD
1104 /* get kspd to tell us when a syscall_exit happens */
1105 if (!kspd_events_reqd
) {
1106 kspd_notify(&kspd_events
);
1112 ret
= getcwd(v
->cwd
, VPE_PATH_MAX
);
1114 printk(KERN_WARNING
"VPE loader: open, getcwd returned %d\n", ret
);
1116 v
->shared_ptr
= NULL
;
1122 static int vpe_release(struct inode
*inode
, struct file
*filp
)
1128 v
= get_vpe(tclimit
);
1132 hdr
= (Elf_Ehdr
*) v
->pbuffer
;
1133 if (memcmp(hdr
->e_ident
, ELFMAG
, SELFMAG
) == 0) {
1134 if (vpe_elfload(v
) >= 0) {
1137 printk(KERN_WARNING
"VPE loader: ELF load failed.\n");
1141 printk(KERN_WARNING
"VPE loader: only elf files are supported\n");
1145 /* It's good to be able to run the SP and if it chokes have a look at
1146 the /dev/rt?. But if we reset the pointer to the shared struct we
1147 lose what has happened. So perhaps if garbage is sent to the vpe
1148 device, use it as a trigger for the reset. Hopefully a nice
1149 executable will be along shortly. */
1151 v
->shared_ptr
= NULL
;
1153 // cleanup any temp buffers
1160 static ssize_t
vpe_write(struct file
*file
, const char __user
* buffer
,
1161 size_t count
, loff_t
* ppos
)
1166 if (iminor(file
->f_path
.dentry
->d_inode
) != minor
)
1169 v
= get_vpe(tclimit
);
1173 if (v
->pbuffer
== NULL
) {
1174 printk(KERN_ERR
"VPE loader: no buffer for program\n");
1178 if ((count
+ v
->len
) > v
->plen
) {
1180 "VPE loader: elf size too big. Perhaps strip uneeded symbols\n");
1184 count
-= copy_from_user(v
->pbuffer
+ v
->len
, buffer
, count
);
1192 static const struct file_operations vpe_fops
= {
1193 .owner
= THIS_MODULE
,
1195 .release
= vpe_release
,
1199 /* module wrapper entry points */
1201 vpe_handle
vpe_alloc(void)
1207 for (i
= 1; i
< MAX_VPES
; i
++) {
1208 if ((v
= get_vpe(i
)) != NULL
) {
1209 v
->state
= VPE_STATE_INUSE
;
1216 EXPORT_SYMBOL(vpe_alloc
);
1218 /* start running from here */
1219 int vpe_start(vpe_handle vpe
, unsigned long start
)
1221 struct vpe
*v
= vpe
;
1227 EXPORT_SYMBOL(vpe_start
);
1229 /* halt it for now */
1230 int vpe_stop(vpe_handle vpe
)
1232 struct vpe
*v
= vpe
;
1234 unsigned int evpe_flags
;
1236 evpe_flags
= dvpe();
1238 if ((t
= list_entry(v
->tc
.next
, struct tc
, tc
)) != NULL
) {
1241 write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA
);
1249 EXPORT_SYMBOL(vpe_stop
);
1251 /* I've done with it thank you */
1252 int vpe_free(vpe_handle vpe
)
1254 struct vpe
*v
= vpe
;
1256 unsigned int evpe_flags
;
1258 if ((t
= list_entry(v
->tc
.next
, struct tc
, tc
)) == NULL
) {
1262 evpe_flags
= dvpe();
1264 /* Put MVPE's into 'configuration state' */
1265 set_c0_mvpcontrol(MVPCONTROL_VPC
);
1268 write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA
);
1271 write_tc_c0_tchalt(TCHALT_H
);
1274 /* mark the TC unallocated */
1275 write_tc_c0_tcstatus(read_tc_c0_tcstatus() & ~TCSTATUS_A
);
1277 v
->state
= VPE_STATE_UNUSED
;
1279 clear_c0_mvpcontrol(MVPCONTROL_VPC
);
1285 EXPORT_SYMBOL(vpe_free
);
1287 void *vpe_get_shared(int index
)
1291 if ((v
= get_vpe(index
)) == NULL
)
1294 return v
->shared_ptr
;
1297 EXPORT_SYMBOL(vpe_get_shared
);
1299 int vpe_getuid(int index
)
1303 if ((v
= get_vpe(index
)) == NULL
)
1309 EXPORT_SYMBOL(vpe_getuid
);
1311 int vpe_getgid(int index
)
1315 if ((v
= get_vpe(index
)) == NULL
)
1321 EXPORT_SYMBOL(vpe_getgid
);
1323 int vpe_notify(int index
, struct vpe_notifications
*notify
)
1327 if ((v
= get_vpe(index
)) == NULL
)
1330 list_add(¬ify
->list
, &v
->notify
);
1334 EXPORT_SYMBOL(vpe_notify
);
1336 char *vpe_getcwd(int index
)
1340 if ((v
= get_vpe(index
)) == NULL
)
1346 EXPORT_SYMBOL(vpe_getcwd
);
1348 #ifdef CONFIG_MIPS_APSP_KSPD
1349 static void kspd_sp_exit( int sp_id
)
1351 cleanup_tc(get_tc(sp_id
));
1355 static ssize_t
store_kill(struct device
*dev
, struct device_attribute
*attr
,
1356 const char *buf
, size_t len
)
1358 struct vpe
*vpe
= get_vpe(tclimit
);
1359 struct vpe_notifications
*not;
1361 list_for_each_entry(not, &vpe
->notify
, list
) {
1365 release_progmem(vpe
->load_addr
);
1366 cleanup_tc(get_tc(tclimit
));
1373 static ssize_t
show_ntcs(struct device
*cd
, struct device_attribute
*attr
,
1376 struct vpe
*vpe
= get_vpe(tclimit
);
1378 return sprintf(buf
, "%d\n", vpe
->ntcs
);
1381 static ssize_t
store_ntcs(struct device
*dev
, struct device_attribute
*attr
,
1382 const char *buf
, size_t len
)
1384 struct vpe
*vpe
= get_vpe(tclimit
);
1388 new = simple_strtoul(buf
, &endp
, 0);
1392 if (new == 0 || new > (hw_tcs
- tclimit
))
1403 static struct device_attribute vpe_class_attributes
[] = {
1404 __ATTR(kill
, S_IWUSR
, NULL
, store_kill
),
1405 __ATTR(ntcs
, S_IRUGO
| S_IWUSR
, show_ntcs
, store_ntcs
),
1409 static void vpe_device_release(struct device
*cd
)
1414 struct class vpe_class
= {
1416 .owner
= THIS_MODULE
,
1417 .dev_release
= vpe_device_release
,
1418 .dev_attrs
= vpe_class_attributes
,
1421 struct device vpe_device
;
1423 static int __init
vpe_module_init(void)
1425 unsigned int mtflags
, vpflags
;
1426 unsigned long flags
, val
;
1427 struct vpe
*v
= NULL
;
1431 if (!cpu_has_mipsmt
) {
1432 printk("VPE loader: not a MIPS MT capable processor\n");
1436 if (vpelimit
== 0) {
1437 printk(KERN_WARNING
"No VPEs reserved for AP/SP, not "
1438 "initializing VPE loader.\nPass maxvpes=<n> argument as "
1439 "kernel argument\n");
1445 printk(KERN_WARNING
"No TCs reserved for AP/SP, not "
1446 "initializing VPE loader.\nPass maxtcs=<n> argument as "
1447 "kernel argument\n");
1452 major
= register_chrdev(0, module_name
, &vpe_fops
);
1454 printk("VPE loader: unable to register character device\n");
1458 err
= class_register(&vpe_class
);
1460 printk(KERN_ERR
"vpe_class registration failed\n");
1464 device_initialize(&vpe_device
);
1465 vpe_device
.class = &vpe_class
,
1466 vpe_device
.parent
= NULL
,
1467 dev_set_name(&vpe_device
, "vpe1");
1468 vpe_device
.devt
= MKDEV(major
, minor
);
1469 err
= device_add(&vpe_device
);
1471 printk(KERN_ERR
"Adding vpe_device failed\n");
1475 local_irq_save(flags
);
1479 /* Put MVPE's into 'configuration state' */
1480 set_c0_mvpcontrol(MVPCONTROL_VPC
);
1482 /* dump_mtregs(); */
1484 val
= read_c0_mvpconf0();
1485 hw_tcs
= (val
& MVPCONF0_PTC
) + 1;
1486 hw_vpes
= ((val
& MVPCONF0_PVPE
) >> MVPCONF0_PVPE_SHIFT
) + 1;
1488 for (tc
= tclimit
; tc
< hw_tcs
; tc
++) {
1490 * Must re-enable multithreading temporarily or in case we
1491 * reschedule send IPIs or similar we might hang.
1493 clear_c0_mvpcontrol(MVPCONTROL_VPC
);
1496 local_irq_restore(flags
);
1503 local_irq_save(flags
);
1506 set_c0_mvpcontrol(MVPCONTROL_VPC
);
1512 if ((v
= alloc_vpe(tc
)) == NULL
) {
1513 printk(KERN_WARNING
"VPE: unable to allocate VPE\n");
1518 v
->ntcs
= hw_tcs
- tclimit
;
1520 /* add the tc to the list of this vpe's tc's. */
1521 list_add(&t
->tc
, &v
->tc
);
1523 /* deactivate all but vpe0 */
1524 if (tc
>= tclimit
) {
1525 unsigned long tmp
= read_vpe_c0_vpeconf0();
1527 tmp
&= ~VPECONF0_VPA
;
1530 tmp
|= VPECONF0_MVP
;
1531 write_vpe_c0_vpeconf0(tmp
);
1534 /* disable multi-threading with TC's */
1535 write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE
);
1537 if (tc
>= vpelimit
) {
1539 * Set config to be the same as vpe0,
1540 * particularly kseg0 coherency alg
1542 write_vpe_c0_config(read_c0_config());
1547 t
->pvpe
= v
; /* set the parent vpe */
1549 if (tc
>= tclimit
) {
1554 /* Any TC that is bound to VPE0 gets left as is - in case
1555 we are running SMTC on VPE0. A TC that is bound to any
1556 other VPE gets bound to VPE0, ideally I'd like to make
1557 it homeless but it doesn't appear to let me bind a TC
1558 to a non-existent VPE. Which is perfectly reasonable.
1560 The (un)bound state is visible to an EJTAG probe so may
1564 if (((tmp
= read_tc_c0_tcbind()) & TCBIND_CURVPE
)) {
1565 /* tc is bound >vpe0 */
1566 write_tc_c0_tcbind(tmp
& ~TCBIND_CURVPE
);
1568 t
->pvpe
= get_vpe(0); /* set the parent vpe */
1572 write_tc_c0_tchalt(TCHALT_H
);
1575 tmp
= read_tc_c0_tcstatus();
1577 /* mark not activated and not dynamically allocatable */
1578 tmp
&= ~(TCSTATUS_A
| TCSTATUS_DA
);
1579 tmp
|= TCSTATUS_IXMT
; /* interrupt exempt */
1580 write_tc_c0_tcstatus(tmp
);
1585 /* release config state */
1586 clear_c0_mvpcontrol(MVPCONTROL_VPC
);
1590 local_irq_restore(flags
);
1592 #ifdef CONFIG_MIPS_APSP_KSPD
1593 kspd_events
.kspd_sp_exit
= kspd_sp_exit
;
1598 class_unregister(&vpe_class
);
1600 unregister_chrdev(major
, module_name
);
1606 static void __exit
vpe_module_exit(void)
1610 device_del(&vpe_device
);
1611 unregister_chrdev(major
, module_name
);
1613 /* No locking needed here */
1614 list_for_each_entry_safe(v
, n
, &vpecontrol
.vpe_list
, list
) {
1615 if (v
->state
!= VPE_STATE_UNUSED
)
1620 module_init(vpe_module_init
);
1621 module_exit(vpe_module_exit
);
1622 MODULE_DESCRIPTION("MIPS VPE Loader");
1623 MODULE_AUTHOR("Elizabeth Oldham, MIPS Technologies, Inc.");
1624 MODULE_LICENSE("GPL");