libertas: convert adhoc operations to direct commands

[linux-2.6/mini2440.git] / drivers / net / wireless / wavelan_cs.c

/*
 *      Wavelan Pcmcia driver
 *
 *              Jean II - HPLB '96
 *
 * Reorganisation and extension of the driver.
 * Original copyright follow. See wavelan_cs.p.h for details.
 *
 * This code is derived from Anthony D. Joseph's code and all the changes here
 * are also under the original copyright below.
 *
 * This code supports version 2.00 of WaveLAN/PCMCIA cards (2.4GHz), and
 * can work on Linux 2.0.36 with support of David Hinds' PCMCIA Card Services
 *
 * Joe Finney (joe@comp.lancs.ac.uk) at Lancaster University in UK added
 * critical code in the routine to initialize the Modem Management Controller.
 *
 * Thanks to Alan Cox and Bruce Janson for their advice.
 *
 *      -- Yunzhou Li (scip4166@nus.sg)
 *
#ifdef WAVELAN_ROAMING  
 * Roaming support added 07/22/98 by Justin Seger (jseger@media.mit.edu)
 * based on patch by Joe Finney from Lancaster University.
#endif
 *
 * Lucent (formerly AT&T GIS, formerly NCR) WaveLAN PCMCIA card: An
 * Ethernet-like radio transceiver controlled by an Intel 82593 coprocessor.
 *
 *   A non-shared memory PCMCIA ethernet driver for linux
 *
 * ISA version modified to support PCMCIA by Anthony Joseph (adj@lcs.mit.edu)
 *
 *
 * Joseph O'Sullivan & John Langford (josullvn@cs.cmu.edu & jcl@cs.cmu.edu)
 *
 * Apr 2 '98  made changes to bring the i82593 control/int handling in line
 *             with offical specs...
 *
 ****************************************************************************
 *   Copyright 1995
 *   Anthony D. Joseph
 *   Massachusetts Institute of Technology
 *
 *   Permission to use, copy, modify, and distribute this program
 *   for any purpose and without fee is hereby granted, provided
 *   that this copyright and permission notice appear on all copies
 *   and supporting documentation, the name of M.I.T. not be used
 *   in advertising or publicity pertaining to distribution of the
 *   program without specific prior permission, and notice be given
 *   in supporting documentation that copying and distribution is
 *   by permission of M.I.T.  M.I.T. makes no representations about
 *   the suitability of this software for any purpose.  It is pro-
 *   vided "as is" without express or implied warranty.         
 ****************************************************************************
 *
 */

/* Do *NOT* add other headers here, you are guaranteed to be wrong - Jean II */
#include "wavelan_cs.p.h"               /* Private header */

#ifdef WAVELAN_ROAMING
static void wl_cell_expiry(unsigned long data);
static void wl_del_wavepoint(wavepoint_history *wavepoint, struct net_local *lp);
static void wv_nwid_filter(unsigned char mode, net_local *lp);
#endif  /*  WAVELAN_ROAMING  */

/************************* MISC SUBROUTINES **************************/
/*
 * Subroutines which won't fit in one of the following category
 * (wavelan modem or i82593)
 */

/******************* MODEM MANAGEMENT SUBROUTINES *******************/
/*
 * Useful subroutines to manage the modem of the wavelan
 */

/*------------------------------------------------------------------*/
/*
 * Read from card's Host Adaptor Status Register.
 */
static inline u_char
hasr_read(u_long        base)
{
  return(inb(HASR(base)));
} /* hasr_read */

/*------------------------------------------------------------------*/
/*
 * Write to card's Host Adapter Command Register.
 */
static inline void
hacr_write(u_long       base,
           u_char       hacr)
{
  outb(hacr, HACR(base));
} /* hacr_write */

/*------------------------------------------------------------------*/
/*
 * Write to card's Host Adapter Command Register. Include a delay for
 * those times when it is needed.
 */
static void
hacr_write_slow(u_long  base,
                u_char  hacr)
{
  hacr_write(base, hacr);
  /* delay might only be needed sometimes */
  mdelay(1);
} /* hacr_write_slow */

/*------------------------------------------------------------------*/
/*
 * Read the Parameter Storage Area from the WaveLAN card's memory
 */
static void
psa_read(struct net_device *    dev,
         int            o,      /* offset in PSA */
         u_char *       b,      /* buffer to fill */
         int            n)      /* size to read */
{
  net_local *lp = netdev_priv(dev);
  u_char __iomem *ptr = lp->mem + PSA_ADDR + (o << 1);

  while(n-- > 0)
    {
      *b++ = readb(ptr);
      /* Due to a lack of address decode pins, the WaveLAN PCMCIA card
       * only supports reading even memory addresses. That means the
       * increment here MUST be two.
       * Because of that, we can't use memcpy_fromio()...
       */
      ptr += 2;
    }
} /* psa_read */

/*------------------------------------------------------------------*/
/*
 * Write the Paramter Storage Area to the WaveLAN card's memory
 */
static void
psa_write(struct net_device *   dev,
          int           o,      /* Offset in psa */
          u_char *      b,      /* Buffer in memory */
          int           n)      /* Length of buffer */
{
  net_local *lp = netdev_priv(dev);
  u_char __iomem *ptr = lp->mem + PSA_ADDR + (o << 1);
  int           count = 0;
  unsigned int  base = dev->base_addr;
  /* As there seem to have no flag PSA_BUSY as in the ISA model, we are
   * oblige to verify this address to know when the PSA is ready... */
  volatile u_char __iomem *verify = lp->mem + PSA_ADDR +
    (psaoff(0, psa_comp_number) << 1);

  /* Authorize writing to PSA */
  hacr_write(base, HACR_PWR_STAT | HACR_ROM_WEN);

  while(n-- > 0)
    {
      /* write to PSA */
      writeb(*b++, ptr);
      ptr += 2;

      /* I don't have the spec, so I don't know what the correct
       * sequence to write is. This hack seem to work for me... */
      count = 0;
      while((readb(verify) != PSA_COMP_PCMCIA_915) && (count++ < 100))
        mdelay(1);
    }

  /* Put the host interface back in standard state */
  hacr_write(base, HACR_DEFAULT);
} /* psa_write */

#ifdef SET_PSA_CRC
/*------------------------------------------------------------------*/
/*
 * Calculate the PSA CRC
 * Thanks to Valster, Nico <NVALSTER@wcnd.nl.lucent.com> for the code
 * NOTE: By specifying a length including the CRC position the
 * returned value should be zero. (i.e. a correct checksum in the PSA)
 *
 * The Windows drivers don't use the CRC, but the AP and the PtP tool
 * depend on it.
 */
static u_short
psa_crc(unsigned char * psa,    /* The PSA */
        int             size)   /* Number of short for CRC */
{
  int           byte_cnt;       /* Loop on the PSA */
  u_short       crc_bytes = 0;  /* Data in the PSA */
  int           bit_cnt;        /* Loop on the bits of the short */

  for(byte_cnt = 0; byte_cnt < size; byte_cnt++ )
    {
      crc_bytes ^= psa[byte_cnt];       /* Its an xor */

      for(bit_cnt = 1; bit_cnt < 9; bit_cnt++ )
        {
          if(crc_bytes & 0x0001)
            crc_bytes = (crc_bytes >> 1) ^ 0xA001;
          else
            crc_bytes >>= 1 ;
        }
    }

  return crc_bytes;
} /* psa_crc */
#endif  /* SET_PSA_CRC */

/*------------------------------------------------------------------*/
/*
 * update the checksum field in the Wavelan's PSA
 */
static void
update_psa_checksum(struct net_device * dev)
{
#ifdef SET_PSA_CRC
  psa_t         psa;
  u_short       crc;

  /* read the parameter storage area */
  psa_read(dev, 0, (unsigned char *) &psa, sizeof(psa));

  /* update the checksum */
  crc = psa_crc((unsigned char *) &psa,
                sizeof(psa) - sizeof(psa.psa_crc[0]) - sizeof(psa.psa_crc[1])
                - sizeof(psa.psa_crc_status));

  psa.psa_crc[0] = crc & 0xFF;
  psa.psa_crc[1] = (crc & 0xFF00) >> 8;

  /* Write it ! */
  psa_write(dev, (char *)&psa.psa_crc - (char *)&psa,
            (unsigned char *)&psa.psa_crc, 2);

#ifdef DEBUG_IOCTL_INFO
  printk (KERN_DEBUG "%s: update_psa_checksum(): crc = 0x%02x%02x\n",
          dev->name, psa.psa_crc[0], psa.psa_crc[1]);

  /* Check again (luxury !) */
  crc = psa_crc((unsigned char *) &psa,
                 sizeof(psa) - sizeof(psa.psa_crc_status));

  if(crc != 0)
    printk(KERN_WARNING "%s: update_psa_checksum(): CRC does not agree with PSA data (even after recalculating)\n", dev->name);
#endif /* DEBUG_IOCTL_INFO */
#endif  /* SET_PSA_CRC */
} /* update_psa_checksum */

/*------------------------------------------------------------------*/
/*
 * Write 1 byte to the MMC.
 */
static void
mmc_out(u_long          base,
        u_short         o,
        u_char          d)
{
  int count = 0;

  /* Wait for MMC to go idle */
  while((count++ < 100) && (inb(HASR(base)) & HASR_MMI_BUSY))
    udelay(10);

  outb((u_char)((o << 1) | MMR_MMI_WR), MMR(base));
  outb(d, MMD(base));
}

/*------------------------------------------------------------------*/
/*
 * Routine to write bytes to the Modem Management Controller.
 * We start by the end because it is the way it should be !
 */
static void
mmc_write(u_long        base,
          u_char        o,
          u_char *      b,
          int           n)
{
  o += n;
  b += n;

  while(n-- > 0 )
    mmc_out(base, --o, *(--b));
} /* mmc_write */

/*------------------------------------------------------------------*/
/*
 * Read 1 byte from the MMC.
 * Optimised version for 1 byte, avoid using memory...
 */
static u_char
mmc_in(u_long   base,
       u_short  o)
{
  int count = 0;

  while((count++ < 100) && (inb(HASR(base)) & HASR_MMI_BUSY))
    udelay(10);
  outb(o << 1, MMR(base));              /* Set the read address */

  outb(0, MMD(base));                   /* Required dummy write */

  while((count++ < 100) && (inb(HASR(base)) & HASR_MMI_BUSY))
    udelay(10);
  return (u_char) (inb(MMD(base)));     /* Now do the actual read */
}

/*------------------------------------------------------------------*/
/*
 * Routine to read bytes from the Modem Management Controller.
 * The implementation is complicated by a lack of address lines,
 * which prevents decoding of the low-order bit.
 * (code has just been moved in the above function)
 * We start by the end because it is the way it should be !
 */
static void
mmc_read(u_long         base,
         u_char         o,
         u_char *       b,
         int            n)
{
  o += n;
  b += n;

  while(n-- > 0)
    *(--b) = mmc_in(base, --o);
} /* mmc_read */

/*------------------------------------------------------------------*/
/*
 * Get the type of encryption available...
 */
static inline int
mmc_encr(u_long         base)   /* i/o port of the card */
{
  int   temp;

  temp = mmc_in(base, mmroff(0, mmr_des_avail));
  if((temp != MMR_DES_AVAIL_DES) && (temp != MMR_DES_AVAIL_AES))
    return 0;
  else
    return temp;
}

/*------------------------------------------------------------------*/
/*
 * Wait for the frequency EEprom to complete a command...
 */
static void
fee_wait(u_long         base,   /* i/o port of the card */
         int            delay,  /* Base delay to wait for */
         int            number) /* Number of time to wait */
{
  int           count = 0;      /* Wait only a limited time */

  while((count++ < number) &&
        (mmc_in(base, mmroff(0, mmr_fee_status)) & MMR_FEE_STATUS_BUSY))
    udelay(delay);
}

/*------------------------------------------------------------------*/
/*
 * Read bytes from the Frequency EEprom (frequency select cards).
 */
static void
fee_read(u_long         base,   /* i/o port of the card */
         u_short        o,      /* destination offset */
         u_short *      b,      /* data buffer */
         int            n)      /* number of registers */
{
  b += n;               /* Position at the end of the area */

  /* Write the address */
  mmc_out(base, mmwoff(0, mmw_fee_addr), o + n - 1);

  /* Loop on all buffer */
  while(n-- > 0)
    {
      /* Write the read command */
      mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_READ);

      /* Wait until EEprom is ready (should be quick !) */
      fee_wait(base, 10, 100);

      /* Read the value */
      *--b = ((mmc_in(base, mmroff(0, mmr_fee_data_h)) << 8) |
              mmc_in(base, mmroff(0, mmr_fee_data_l)));
    }
}


/*------------------------------------------------------------------*/
/*
 * Write bytes from the Frequency EEprom (frequency select cards).
 * This is a bit complicated, because the frequency eeprom has to
 * be unprotected and the write enabled.
 * Jean II
 */
static void
fee_write(u_long        base,   /* i/o port of the card */
          u_short       o,      /* destination offset */
          u_short *     b,      /* data buffer */
          int           n)      /* number of registers */
{
  b += n;               /* Position at the end of the area */

#ifdef EEPROM_IS_PROTECTED      /* disabled */
#ifdef DOESNT_SEEM_TO_WORK      /* disabled */
  /* Ask to read the protected register */
  mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRREAD);

  fee_wait(base, 10, 100);

  /* Read the protected register */
  printk("Protected 2 : %02X-%02X\n",
         mmc_in(base, mmroff(0, mmr_fee_data_h)),
         mmc_in(base, mmroff(0, mmr_fee_data_l)));
#endif  /* DOESNT_SEEM_TO_WORK */

  /* Enable protected register */
  mmc_out(base, mmwoff(0, mmw_fee_addr), MMW_FEE_ADDR_EN);
  mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PREN);

  fee_wait(base, 10, 100);

  /* Unprotect area */
  mmc_out(base, mmwoff(0, mmw_fee_addr), o + n);
  mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRWRITE);
#ifdef DOESNT_SEEM_TO_WORK      /* disabled */
  /* Or use : */
  mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRCLEAR);
#endif  /* DOESNT_SEEM_TO_WORK */

  fee_wait(base, 10, 100);
#endif  /* EEPROM_IS_PROTECTED */

  /* Write enable */
  mmc_out(base, mmwoff(0, mmw_fee_addr), MMW_FEE_ADDR_EN);
  mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_WREN);

  fee_wait(base, 10, 100);

  /* Write the EEprom address */
  mmc_out(base, mmwoff(0, mmw_fee_addr), o + n - 1);

  /* Loop on all buffer */
  while(n-- > 0)
    {
      /* Write the value */
      mmc_out(base, mmwoff(0, mmw_fee_data_h), (*--b) >> 8);
      mmc_out(base, mmwoff(0, mmw_fee_data_l), *b & 0xFF);

      /* Write the write command */
      mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_WRITE);

      /* Wavelan doc says : wait at least 10 ms for EEBUSY = 0 */
      mdelay(10);
      fee_wait(base, 10, 100);
    }

  /* Write disable */
  mmc_out(base, mmwoff(0, mmw_fee_addr), MMW_FEE_ADDR_DS);
  mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_WDS);

  fee_wait(base, 10, 100);

#ifdef EEPROM_IS_PROTECTED      /* disabled */
  /* Reprotect EEprom */
  mmc_out(base, mmwoff(0, mmw_fee_addr), 0x00);
  mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRWRITE);

  fee_wait(base, 10, 100);
#endif  /* EEPROM_IS_PROTECTED */
}

/******************* WaveLAN Roaming routines... ********************/

#ifdef WAVELAN_ROAMING  /* Conditional compile, see wavelan_cs.h */

static unsigned char WAVELAN_BEACON_ADDRESS[] = {0x09,0x00,0x0e,0x20,0x03,0x00};
  
static void wv_roam_init(struct net_device *dev)
{
  net_local  *lp= netdev_priv(dev);

  /* Do not remove this unless you have a good reason */
  printk(KERN_NOTICE "%s: Warning, you have enabled roaming on"
         " device %s !\n", dev->name, dev->name);
  printk(KERN_NOTICE "Roaming is currently an experimental unsupported feature"
         " of the Wavelan driver.\n");
  printk(KERN_NOTICE "It may work, but may also make the driver behave in"
         " erratic ways or crash.\n");

  lp->wavepoint_table.head=NULL;           /* Initialise WavePoint table */
  lp->wavepoint_table.num_wavepoints=0;
  lp->wavepoint_table.locked=0;
  lp->curr_point=NULL;                        /* No default WavePoint */
  lp->cell_search=0;
  
  lp->cell_timer.data=(long)lp;               /* Start cell expiry timer */
  lp->cell_timer.function=wl_cell_expiry;
  lp->cell_timer.expires=jiffies+CELL_TIMEOUT;
  add_timer(&lp->cell_timer);
  
  wv_nwid_filter(NWID_PROMISC,lp) ;    /* Enter NWID promiscuous mode */
  /* to build up a good WavePoint */
                                           /* table... */
  printk(KERN_DEBUG "WaveLAN: Roaming enabled on device %s\n",dev->name);
}
 
static void wv_roam_cleanup(struct net_device *dev)
{
  wavepoint_history *ptr,*old_ptr;
  net_local *lp= netdev_priv(dev);
  
  printk(KERN_DEBUG "WaveLAN: Roaming Disabled on device %s\n",dev->name);
  
  /* Fixme : maybe we should check that the timer exist before deleting it */
  del_timer(&lp->cell_timer);          /* Remove cell expiry timer       */
  ptr=lp->wavepoint_table.head;        /* Clear device's WavePoint table */
  while(ptr!=NULL)
    {
      old_ptr=ptr;
      ptr=ptr->next;    
      wl_del_wavepoint(old_ptr,lp);     
    }
}

/* Enable/Disable NWID promiscuous mode on a given device */
static void wv_nwid_filter(unsigned char mode, net_local *lp)
{
  mm_t                  m;
  unsigned long         flags;
  
#ifdef WAVELAN_ROAMING_DEBUG
  printk(KERN_DEBUG "WaveLAN: NWID promisc %s, device %s\n",(mode==NWID_PROMISC) ? "on" : "off", lp->dev->name);
#endif
  
  /* Disable interrupts & save flags */
  spin_lock_irqsave(&lp->spinlock, flags);
  
  m.w.mmw_loopt_sel = (mode==NWID_PROMISC) ? MMW_LOOPT_SEL_DIS_NWID : 0x00;
  mmc_write(lp->dev->base_addr, (char *)&m.w.mmw_loopt_sel - (char *)&m, (unsigned char *)&m.w.mmw_loopt_sel, 1);
  
  if(mode==NWID_PROMISC)
    lp->cell_search=1;
  else
    lp->cell_search=0;

  /* ReEnable interrupts & restore flags */
  spin_unlock_irqrestore(&lp->spinlock, flags);
}

/* Find a record in the WavePoint table matching a given NWID */
static wavepoint_history *wl_roam_check(unsigned short nwid, net_local *lp)
{
  wavepoint_history     *ptr=lp->wavepoint_table.head;
  
  while(ptr!=NULL){
    if(ptr->nwid==nwid)
      return ptr;       
    ptr=ptr->next;
  }
  return NULL;
}

/* Create a new wavepoint table entry */
static wavepoint_history *wl_new_wavepoint(unsigned short nwid, unsigned char seq, net_local* lp)
{
  wavepoint_history *new_wavepoint;

#ifdef WAVELAN_ROAMING_DEBUG    
  printk(KERN_DEBUG "WaveLAN: New Wavepoint, NWID:%.4X\n",nwid);
#endif
  
  if(lp->wavepoint_table.num_wavepoints==MAX_WAVEPOINTS)
    return NULL;
  
  new_wavepoint = kmalloc(sizeof(wavepoint_history),GFP_ATOMIC);
  if(new_wavepoint==NULL)
    return NULL;
  
  new_wavepoint->nwid=nwid;                       /* New WavePoints NWID */
  new_wavepoint->average_fast=0;                    /* Running Averages..*/
  new_wavepoint->average_slow=0;
  new_wavepoint->qualptr=0;                       /* Start of ringbuffer */
  new_wavepoint->last_seq=seq-1;                /* Last sequence no.seen */
  memset(new_wavepoint->sigqual,0,WAVEPOINT_HISTORY);/* Empty ringbuffer */
  
  new_wavepoint->next=lp->wavepoint_table.head;/* Add to wavepoint table */
  new_wavepoint->prev=NULL;
  
  if(lp->wavepoint_table.head!=NULL)
    lp->wavepoint_table.head->prev=new_wavepoint;
  
  lp->wavepoint_table.head=new_wavepoint;
  
  lp->wavepoint_table.num_wavepoints++;     /* no. of visible wavepoints */
  
  return new_wavepoint;
}

/* Remove a wavepoint entry from WavePoint table */
static void wl_del_wavepoint(wavepoint_history *wavepoint, struct net_local *lp)
{
  if(wavepoint==NULL)
    return;
  
  if(lp->curr_point==wavepoint)
    lp->curr_point=NULL;
  
  if(wavepoint->prev!=NULL)
    wavepoint->prev->next=wavepoint->next;
  
  if(wavepoint->next!=NULL)
    wavepoint->next->prev=wavepoint->prev;
  
  if(lp->wavepoint_table.head==wavepoint)
    lp->wavepoint_table.head=wavepoint->next;
  
  lp->wavepoint_table.num_wavepoints--;
  kfree(wavepoint);
}

/* Timer callback function - checks WavePoint table for stale entries */ 
static void wl_cell_expiry(unsigned long data)
{
  net_local *lp=(net_local *)data;
  wavepoint_history *wavepoint=lp->wavepoint_table.head,*old_point;
  
#if WAVELAN_ROAMING_DEBUG > 1
  printk(KERN_DEBUG "WaveLAN: Wavepoint timeout, dev %s\n",lp->dev->name);
#endif
  
  if(lp->wavepoint_table.locked)
    {
#if WAVELAN_ROAMING_DEBUG > 1
      printk(KERN_DEBUG "WaveLAN: Wavepoint table locked...\n");
#endif
      
      lp->cell_timer.expires=jiffies+1; /* If table in use, come back later */
      add_timer(&lp->cell_timer);
      return;
    }
  
  while(wavepoint!=NULL)
    {
      if(time_after(jiffies, wavepoint->last_seen + CELL_TIMEOUT))
        {
#ifdef WAVELAN_ROAMING_DEBUG
          printk(KERN_DEBUG "WaveLAN: Bye bye %.4X\n",wavepoint->nwid);
#endif
          
          old_point=wavepoint;
          wavepoint=wavepoint->next;
          wl_del_wavepoint(old_point,lp);
        }
      else
        wavepoint=wavepoint->next;
    }
  lp->cell_timer.expires=jiffies+CELL_TIMEOUT;
  add_timer(&lp->cell_timer);
}

/* Update SNR history of a wavepoint */
static void wl_update_history(wavepoint_history *wavepoint, unsigned char sigqual, unsigned char seq)   
{
  int i=0,num_missed=0,ptr=0;
  int average_fast=0,average_slow=0;
  
  num_missed=(seq-wavepoint->last_seq)%WAVEPOINT_HISTORY;/* Have we missed
                                                            any beacons? */
  if(num_missed)
    for(i=0;i<num_missed;i++)
      {
        wavepoint->sigqual[wavepoint->qualptr++]=0; /* If so, enter them as 0's */
        wavepoint->qualptr %=WAVEPOINT_HISTORY;    /* in the ringbuffer. */
      }
  wavepoint->last_seen=jiffies;                 /* Add beacon to history */
  wavepoint->last_seq=seq;      
  wavepoint->sigqual[wavepoint->qualptr++]=sigqual;          
  wavepoint->qualptr %=WAVEPOINT_HISTORY;
  ptr=(wavepoint->qualptr-WAVEPOINT_FAST_HISTORY+WAVEPOINT_HISTORY)%WAVEPOINT_HISTORY;
  
  for(i=0;i<WAVEPOINT_FAST_HISTORY;i++)       /* Update running averages */
    {
      average_fast+=wavepoint->sigqual[ptr++];
      ptr %=WAVEPOINT_HISTORY;
    }
  
  average_slow=average_fast;
  for(i=WAVEPOINT_FAST_HISTORY;i<WAVEPOINT_HISTORY;i++)
    {
      average_slow+=wavepoint->sigqual[ptr++];
      ptr %=WAVEPOINT_HISTORY;
    }
  
  wavepoint->average_fast=average_fast/WAVEPOINT_FAST_HISTORY;
  wavepoint->average_slow=average_slow/WAVEPOINT_HISTORY;       
}

/* Perform a handover to a new WavePoint */
static void wv_roam_handover(wavepoint_history *wavepoint, net_local *lp)
{
  unsigned int          base = lp->dev->base_addr;
  mm_t                  m;
  unsigned long         flags;

  if(wavepoint==lp->curr_point)          /* Sanity check... */
    {
      wv_nwid_filter(!NWID_PROMISC,lp);
      return;
    }
  
#ifdef WAVELAN_ROAMING_DEBUG
  printk(KERN_DEBUG "WaveLAN: Doing handover to %.4X, dev %s\n",wavepoint->nwid,lp->dev->name);
#endif
        
  /* Disable interrupts & save flags */
  spin_lock_irqsave(&lp->spinlock, flags);

  m.w.mmw_netw_id_l = wavepoint->nwid & 0xFF;
  m.w.mmw_netw_id_h = (wavepoint->nwid & 0xFF00) >> 8;
  
  mmc_write(base, (char *)&m.w.mmw_netw_id_l - (char *)&m, (unsigned char *)&m.w.mmw_netw_id_l, 2);
  
  /* ReEnable interrupts & restore flags */
  spin_unlock_irqrestore(&lp->spinlock, flags);

  wv_nwid_filter(!NWID_PROMISC,lp);
  lp->curr_point=wavepoint;
}

/* Called when a WavePoint beacon is received */
static void wl_roam_gather(struct net_device *  dev,
                           u_char *  hdr,   /* Beacon header */
                           u_char *  stats) /* SNR, Signal quality
                                                      of packet */
{
  wavepoint_beacon *beacon= (wavepoint_beacon *)hdr; /* Rcvd. Beacon */
  unsigned short nwid=ntohs(beacon->nwid);  
  unsigned short sigqual=stats[2] & MMR_SGNL_QUAL;   /* SNR of beacon */
  wavepoint_history *wavepoint=NULL;                /* WavePoint table entry */
  net_local *lp = netdev_priv(dev);              /* Device info */

#ifdef I_NEED_THIS_FEATURE
  /* Some people don't need this, some other may need it */
  nwid=nwid^ntohs(beacon->domain_id);
#endif

#if WAVELAN_ROAMING_DEBUG > 1
  printk(KERN_DEBUG "WaveLAN: beacon, dev %s:\n",dev->name);
  printk(KERN_DEBUG "Domain: %.4X NWID: %.4X SigQual=%d\n",ntohs(beacon->domain_id),nwid,sigqual);
#endif
  
  lp->wavepoint_table.locked=1;                            /* <Mutex> */
  
  wavepoint=wl_roam_check(nwid,lp);            /* Find WavePoint table entry */
  if(wavepoint==NULL)                    /* If no entry, Create a new one... */
    {
      wavepoint=wl_new_wavepoint(nwid,beacon->seq,lp);
      if(wavepoint==NULL)
        goto out;
    }
  if(lp->curr_point==NULL)             /* If this is the only WavePoint, */
    wv_roam_handover(wavepoint, lp);             /* Jump on it! */
  
  wl_update_history(wavepoint, sigqual, beacon->seq); /* Update SNR history
                                                         stats. */
  
  if(lp->curr_point->average_slow < SEARCH_THRESH_LOW) /* If our current */
    if(!lp->cell_search)                  /* WavePoint is getting faint, */
      wv_nwid_filter(NWID_PROMISC,lp);    /* start looking for a new one */
  
  if(wavepoint->average_slow > 
     lp->curr_point->average_slow + WAVELAN_ROAMING_DELTA)
    wv_roam_handover(wavepoint, lp);   /* Handover to a better WavePoint */
  
  if(lp->curr_point->average_slow > SEARCH_THRESH_HIGH) /* If our SNR is */
    if(lp->cell_search)  /* getting better, drop out of cell search mode */
      wv_nwid_filter(!NWID_PROMISC,lp);
  
out:
  lp->wavepoint_table.locked=0;                        /* </MUTEX>   :-) */
}

/* Test this MAC frame a WavePoint beacon */
static inline int WAVELAN_BEACON(unsigned char *data)
{
  wavepoint_beacon *beacon= (wavepoint_beacon *)data;
  static const wavepoint_beacon beacon_template={0xaa,0xaa,0x03,0x08,0x00,0x0e,0x20,0x03,0x00};
  
  if(memcmp(beacon,&beacon_template,9)==0)
    return 1;
  else
    return 0;
}
#endif  /* WAVELAN_ROAMING */

/************************ I82593 SUBROUTINES *************************/
/*
 * Useful subroutines to manage the Ethernet controller
 */

/*------------------------------------------------------------------*/
/*
 * Routine to synchronously send a command to the i82593 chip. 
 * Should be called with interrupts disabled.
 * (called by wv_packet_write(), wv_ru_stop(), wv_ru_start(),
 *  wv_82593_config() & wv_diag())
 */
static int
wv_82593_cmd(struct net_device *        dev,
             char *     str,
             int        cmd,
             int        result)
{
  unsigned int  base = dev->base_addr;
  int           status;
  int           wait_completed;
  long          spin;

  /* Spin until the chip finishes executing its current command (if any) */
  spin = 1000;
  do
    {
      /* Time calibration of the loop */
      udelay(10);

      /* Read the interrupt register */
      outb(OP0_NOP | CR0_STATUS_3, LCCR(base));
      status = inb(LCSR(base));
    }
  while(((status & SR3_EXEC_STATE_MASK) != SR3_EXEC_IDLE) && (spin-- > 0));

  /* If the interrupt hasn't be posted */
  if(spin <= 0)
    {
#ifdef DEBUG_INTERRUPT_ERROR
      printk(KERN_INFO "wv_82593_cmd: %s timeout (previous command), status 0x%02x\n",
             str, status);
#endif
      return(FALSE);
    }

  /* Issue the command to the controller */
  outb(cmd, LCCR(base));

  /* If we don't have to check the result of the command
   * Note : this mean that the irq handler will deal with that */
  if(result == SR0_NO_RESULT)
    return(TRUE);

  /* We are waiting for command completion */
  wait_completed = TRUE;

  /* Busy wait while the LAN controller executes the command. */
  spin = 1000;
  do
    {
      /* Time calibration of the loop */
      udelay(10);

      /* Read the interrupt register */
      outb(CR0_STATUS_0 | OP0_NOP, LCCR(base));
      status = inb(LCSR(base));

      /* Check if there was an interrupt posted */
      if((status & SR0_INTERRUPT))
        {
          /* Acknowledge the interrupt */
          outb(CR0_INT_ACK | OP0_NOP, LCCR(base));

          /* Check if interrupt is a command completion */
          if(((status & SR0_BOTH_RX_TX) != SR0_BOTH_RX_TX) &&
             ((status & SR0_BOTH_RX_TX) != 0x0) &&
             !(status & SR0_RECEPTION))
            {
              /* Signal command completion */
              wait_completed = FALSE;
            }
          else
            {
              /* Note : Rx interrupts will be handled later, because we can
               * handle multiple Rx packets at once */
#ifdef DEBUG_INTERRUPT_INFO
              printk(KERN_INFO "wv_82593_cmd: not our interrupt\n");
#endif
            }
        }
    }
  while(wait_completed && (spin-- > 0));

  /* If the interrupt hasn't be posted */
  if(wait_completed)
    {
#ifdef DEBUG_INTERRUPT_ERROR
      printk(KERN_INFO "wv_82593_cmd: %s timeout, status 0x%02x\n",
             str, status);
#endif
      return(FALSE);
    }

  /* Check the return code returned by the card (see above) against
   * the expected return code provided by the caller */
  if((status & SR0_EVENT_MASK) != result)
    {
#ifdef DEBUG_INTERRUPT_ERROR
      printk(KERN_INFO "wv_82593_cmd: %s failed, status = 0x%x\n",
             str, status);
#endif
      return(FALSE);
    }

  return(TRUE);
} /* wv_82593_cmd */

/*------------------------------------------------------------------*/
/*
 * This routine does a 593 op-code number 7, and obtains the diagnose
 * status for the WaveLAN.
 */
static inline int
wv_diag(struct net_device *     dev)
{
  return(wv_82593_cmd(dev, "wv_diag(): diagnose",
                      OP0_DIAGNOSE, SR0_DIAGNOSE_PASSED));
} /* wv_diag */

/*------------------------------------------------------------------*/
/*
 * Routine to read len bytes from the i82593's ring buffer, starting at
 * chip address addr. The results read from the chip are stored in buf.
 * The return value is the address to use for next the call.
 */
static int
read_ringbuf(struct net_device *        dev,
             int        addr,
             char *     buf,
             int        len)
{
  unsigned int  base = dev->base_addr;
  int           ring_ptr = addr;
  int           chunk_len;
  char *        buf_ptr = buf;

  /* Get all the buffer */
  while(len > 0)
    {
      /* Position the Program I/O Register at the ring buffer pointer */
      outb(ring_ptr & 0xff, PIORL(base));
      outb(((ring_ptr >> 8) & PIORH_MASK), PIORH(base));

      /* First, determine how much we can read without wrapping around the
         ring buffer */
      if((addr + len) < (RX_BASE + RX_SIZE))
        chunk_len = len;
      else
        chunk_len = RX_BASE + RX_SIZE - addr;
      insb(PIOP(base), buf_ptr, chunk_len);
      buf_ptr += chunk_len;
      len -= chunk_len;
      ring_ptr = (ring_ptr - RX_BASE + chunk_len) % RX_SIZE + RX_BASE;
    }
  return(ring_ptr);
} /* read_ringbuf */

/*------------------------------------------------------------------*/
/*
 * Reconfigure the i82593, or at least ask for it...
 * Because wv_82593_config use the transmission buffer, we must do it
 * when we are sure that there is no transmission, so we do it now
 * or in wavelan_packet_xmit() (I can't find any better place,
 * wavelan_interrupt is not an option...), so you may experience
 * some delay sometime...
 */
static void
wv_82593_reconfig(struct net_device *   dev)
{
  net_local *           lp = netdev_priv(dev);
  struct pcmcia_device *                link = lp->link;
  unsigned long         flags;

  /* Arm the flag, will be cleard in wv_82593_config() */
  lp->reconfig_82593 = TRUE;

  /* Check if we can do it now ! */
  if((link->open) && (netif_running(dev)) && !(netif_queue_stopped(dev)))
    {
      spin_lock_irqsave(&lp->spinlock, flags);  /* Disable interrupts */
      wv_82593_config(dev);
      spin_unlock_irqrestore(&lp->spinlock, flags);     /* Re-enable interrupts */
    }
  else
    {
#ifdef DEBUG_IOCTL_INFO
      printk(KERN_DEBUG
             "%s: wv_82593_reconfig(): delayed (state = %lX, link = %d)\n",
             dev->name, dev->state, link->open);
#endif
    }
}

/********************* DEBUG & INFO SUBROUTINES *********************/
/*
 * This routines are used in the code to show debug informations.
 * Most of the time, it dump the content of hardware structures...
 */

#ifdef DEBUG_PSA_SHOW
/*------------------------------------------------------------------*/
/*
 * Print the formatted contents of the Parameter Storage Area.
 */
static void
wv_psa_show(psa_t *     p)
{
  DECLARE_MAC_BUF(mac);
  printk(KERN_DEBUG "##### wavelan psa contents: #####\n");
  printk(KERN_DEBUG "psa_io_base_addr_1: 0x%02X %02X %02X %02X\n",
         p->psa_io_base_addr_1,
         p->psa_io_base_addr_2,
         p->psa_io_base_addr_3,
         p->psa_io_base_addr_4);
  printk(KERN_DEBUG "psa_rem_boot_addr_1: 0x%02X %02X %02X\n",
         p->psa_rem_boot_addr_1,
         p->psa_rem_boot_addr_2,
         p->psa_rem_boot_addr_3);
  printk(KERN_DEBUG "psa_holi_params: 0x%02x, ", p->psa_holi_params);
  printk("psa_int_req_no: %d\n", p->psa_int_req_no);
#ifdef DEBUG_SHOW_UNUSED
  printk(KERN_DEBUG "psa_unused0[]: %s\n",
         print_mac(mac, p->psa_unused0));
#endif  /* DEBUG_SHOW_UNUSED */
  printk(KERN_DEBUG "psa_univ_mac_addr[]: %s\n",
         print_mac(mac, p->psa_univ_mac_addr));
  printk(KERN_DEBUG "psa_local_mac_addr[]: %s\n",
         print_mac(mac, p->psa_local_mac_addr));
  printk(KERN_DEBUG "psa_univ_local_sel: %d, ", p->psa_univ_local_sel);
  printk("psa_comp_number: %d, ", p->psa_comp_number);
  printk("psa_thr_pre_set: 0x%02x\n", p->psa_thr_pre_set);
  printk(KERN_DEBUG "psa_feature_select/decay_prm: 0x%02x, ",
         p->psa_feature_select);
  printk("psa_subband/decay_update_prm: %d\n", p->psa_subband);
  printk(KERN_DEBUG "psa_quality_thr: 0x%02x, ", p->psa_quality_thr);
  printk("psa_mod_delay: 0x%02x\n", p->psa_mod_delay);
  printk(KERN_DEBUG "psa_nwid: 0x%02x%02x, ", p->psa_nwid[0], p->psa_nwid[1]);
  printk("psa_nwid_select: %d\n", p->psa_nwid_select);
  printk(KERN_DEBUG "psa_encryption_select: %d, ", p->psa_encryption_select);
  printk("psa_encryption_key[]: %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
         p->psa_encryption_key[0],
         p->psa_encryption_key[1],
         p->psa_encryption_key[2],
         p->psa_encryption_key[3],
         p->psa_encryption_key[4],
         p->psa_encryption_key[5],
         p->psa_encryption_key[6],
         p->psa_encryption_key[7]);
  printk(KERN_DEBUG "psa_databus_width: %d\n", p->psa_databus_width);
  printk(KERN_DEBUG "psa_call_code/auto_squelch: 0x%02x, ",
         p->psa_call_code[0]);
  printk("psa_call_code[]: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
         p->psa_call_code[0],
         p->psa_call_code[1],
         p->psa_call_code[2],
         p->psa_call_code[3],
         p->psa_call_code[4],
         p->psa_call_code[5],
         p->psa_call_code[6],
         p->psa_call_code[7]);
#ifdef DEBUG_SHOW_UNUSED
  printk(KERN_DEBUG "psa_reserved[]: %02X:%02X\n",
         p->psa_reserved[0],
         p->psa_reserved[1]);
#endif  /* DEBUG_SHOW_UNUSED */
  printk(KERN_DEBUG "psa_conf_status: %d, ", p->psa_conf_status);
  printk("psa_crc: 0x%02x%02x, ", p->psa_crc[0], p->psa_crc[1]);
  printk("psa_crc_status: 0x%02x\n", p->psa_crc_status);
} /* wv_psa_show */
#endif  /* DEBUG_PSA_SHOW */

#ifdef DEBUG_MMC_SHOW
/*------------------------------------------------------------------*/
/*
 * Print the formatted status of the Modem Management Controller.
 * This function need to be completed...
 */
static void
wv_mmc_show(struct net_device * dev)
{
  unsigned int  base = dev->base_addr;
  net_local *   lp = netdev_priv(dev);
  mmr_t         m;

  /* Basic check */
  if(hasr_read(base) & HASR_NO_CLK)
    {
      printk(KERN_WARNING "%s: wv_mmc_show: modem not connected\n",
             dev->name);
      return;
    }

  spin_lock_irqsave(&lp->spinlock, flags);

  /* Read the mmc */
  mmc_out(base, mmwoff(0, mmw_freeze), 1);
  mmc_read(base, 0, (u_char *)&m, sizeof(m));
  mmc_out(base, mmwoff(0, mmw_freeze), 0);

  /* Don't forget to update statistics */
  lp->wstats.discard.nwid += (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l;

  spin_unlock_irqrestore(&lp->spinlock, flags);

  printk(KERN_DEBUG "##### wavelan modem status registers: #####\n");
#ifdef DEBUG_SHOW_UNUSED
  printk(KERN_DEBUG "mmc_unused0[]: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
         m.mmr_unused0[0],
         m.mmr_unused0[1],
         m.mmr_unused0[2],
         m.mmr_unused0[3],
         m.mmr_unused0[4],
         m.mmr_unused0[5],
         m.mmr_unused0[6],
         m.mmr_unused0[7]);
#endif  /* DEBUG_SHOW_UNUSED */
  printk(KERN_DEBUG "Encryption algorithm: %02X - Status: %02X\n",
         m.mmr_des_avail, m.mmr_des_status);
#ifdef DEBUG_SHOW_UNUSED
  printk(KERN_DEBUG "mmc_unused1[]: %02X:%02X:%02X:%02X:%02X\n",
         m.mmr_unused1[0],
         m.mmr_unused1[1],
         m.mmr_unused1[2],
         m.mmr_unused1[3],
         m.mmr_unused1[4]);
#endif  /* DEBUG_SHOW_UNUSED */
  printk(KERN_DEBUG "dce_status: 0x%x [%s%s%s%s]\n",
         m.mmr_dce_status,
         (m.mmr_dce_status & MMR_DCE_STATUS_RX_BUSY) ? "energy detected,":"",
         (m.mmr_dce_status & MMR_DCE_STATUS_LOOPT_IND) ?
         "loop test indicated," : "",
         (m.mmr_dce_status & MMR_DCE_STATUS_TX_BUSY) ? "transmitter on," : "",
         (m.mmr_dce_status & MMR_DCE_STATUS_JBR_EXPIRED) ?
         "jabber timer expired," : "");
  printk(KERN_DEBUG "Dsp ID: %02X\n",
         m.mmr_dsp_id);
#ifdef DEBUG_SHOW_UNUSED
  printk(KERN_DEBUG "mmc_unused2[]: %02X:%02X\n",
         m.mmr_unused2[0],
         m.mmr_unused2[1]);
#endif  /* DEBUG_SHOW_UNUSED */
  printk(KERN_DEBUG "# correct_nwid: %d, # wrong_nwid: %d\n",
         (m.mmr_correct_nwid_h << 8) | m.mmr_correct_nwid_l,
         (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l);
  printk(KERN_DEBUG "thr_pre_set: 0x%x [current signal %s]\n",
         m.mmr_thr_pre_set & MMR_THR_PRE_SET,
         (m.mmr_thr_pre_set & MMR_THR_PRE_SET_CUR) ? "above" : "below");
  printk(KERN_DEBUG "signal_lvl: %d [%s], ",
         m.mmr_signal_lvl & MMR_SIGNAL_LVL,
         (m.mmr_signal_lvl & MMR_SIGNAL_LVL_VALID) ? "new msg" : "no new msg");
  printk("silence_lvl: %d [%s], ", m.mmr_silence_lvl & MMR_SILENCE_LVL,
         (m.mmr_silence_lvl & MMR_SILENCE_LVL_VALID) ? "update done" : "no new update");
  printk("sgnl_qual: 0x%x [%s]\n", m.mmr_sgnl_qual & MMR_SGNL_QUAL,
         (m.mmr_sgnl_qual & MMR_SGNL_QUAL_ANT) ? "Antenna 1" : "Antenna 0");
#ifdef DEBUG_SHOW_UNUSED
  printk(KERN_DEBUG "netw_id_l: %x\n", m.mmr_netw_id_l);
#endif  /* DEBUG_SHOW_UNUSED */
} /* wv_mmc_show */
#endif  /* DEBUG_MMC_SHOW */

#ifdef DEBUG_I82593_SHOW
/*------------------------------------------------------------------*/
/*
 * Print the formatted status of the i82593's receive unit.
 */
static void
wv_ru_show(struct net_device *  dev)
{
  net_local *lp = netdev_priv(dev);

  printk(KERN_DEBUG "##### wavelan i82593 receiver status: #####\n");
  printk(KERN_DEBUG "ru: rfp %d stop %d", lp->rfp, lp->stop);
  /*
   * Not implemented yet...
   */
  printk("\n");
} /* wv_ru_show */
#endif  /* DEBUG_I82593_SHOW */

#ifdef DEBUG_DEVICE_SHOW
/*------------------------------------------------------------------*/
/*
 * Print the formatted status of the WaveLAN PCMCIA device driver.
 */
static void
wv_dev_show(struct net_device * dev)
{
  printk(KERN_DEBUG "dev:");
  printk(" state=%lX,", dev->state);
  printk(" trans_start=%ld,", dev->trans_start);
  printk(" flags=0x%x,", dev->flags);
  printk("\n");
} /* wv_dev_show */

/*------------------------------------------------------------------*/
/*
 * Print the formatted status of the WaveLAN PCMCIA device driver's
 * private information.
 */
static void
wv_local_show(struct net_device *       dev)
{
  net_local *lp = netdev_priv(dev);

  printk(KERN_DEBUG "local:");
  /*
   * Not implemented yet...
   */
  printk("\n");
} /* wv_local_show */
#endif  /* DEBUG_DEVICE_SHOW */

#if defined(DEBUG_RX_INFO) || defined(DEBUG_TX_INFO)
/*------------------------------------------------------------------*/
/*
 * Dump packet header (and content if necessary) on the screen
 */
static void
wv_packet_info(u_char *         p,              /* Packet to dump */
               int              length,         /* Length of the packet */
               char *           msg1,           /* Name of the device */
               char *           msg2)           /* Name of the function */
{
  int           i;
  int           maxi;
  DECLARE_MAC_BUF(mac);

  printk(KERN_DEBUG "%s: %s(): dest %s, length %d\n",
         msg1, msg2, print_mac(mac, p), length);
  printk(KERN_DEBUG "%s: %s(): src %s, type 0x%02X%02X\n",
         msg1, msg2, print_mac(mac, &p[6]), p[12], p[13]);

#ifdef DEBUG_PACKET_DUMP

  printk(KERN_DEBUG "data=\"");

  if((maxi = length) > DEBUG_PACKET_DUMP)
    maxi = DEBUG_PACKET_DUMP;
  for(i = 14; i < maxi; i++)
    if(p[i] >= ' ' && p[i] <= '~')
      printk(" %c", p[i]);
    else
      printk("%02X", p[i]);
  if(maxi < length)
    printk("..");
  printk("\"\n");
  printk(KERN_DEBUG "\n");
#endif  /* DEBUG_PACKET_DUMP */
}
#endif  /* defined(DEBUG_RX_INFO) || defined(DEBUG_TX_INFO) */

/*------------------------------------------------------------------*/
/*
 * This is the information which is displayed by the driver at startup
 * There  is a lot of flag to configure it at your will...
 */
static void
wv_init_info(struct net_device *        dev)
{
  unsigned int  base = dev->base_addr;
  psa_t         psa;
  DECLARE_MAC_BUF(mac);

  /* Read the parameter storage area */
  psa_read(dev, 0, (unsigned char *) &psa, sizeof(psa));

#ifdef DEBUG_PSA_SHOW
  wv_psa_show(&psa);
#endif
#ifdef DEBUG_MMC_SHOW
  wv_mmc_show(dev);
#endif
#ifdef DEBUG_I82593_SHOW
  wv_ru_show(dev);
#endif

#ifdef DEBUG_BASIC_SHOW
  /* Now, let's go for the basic stuff */
  printk(KERN_NOTICE "%s: WaveLAN: port %#x, irq %d, "
         "hw_addr %s",
         dev->name, base, dev->irq,
         print_mac(mac, dev->dev_addr));

  /* Print current network id */
  if(psa.psa_nwid_select)
    printk(", nwid 0x%02X-%02X", psa.psa_nwid[0], psa.psa_nwid[1]);
  else
    printk(", nwid off");

  /* If 2.00 card */
  if(!(mmc_in(base, mmroff(0, mmr_fee_status)) &
       (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY)))
    {
      unsigned short    freq;

      /* Ask the EEprom to read the frequency from the first area */
      fee_read(base, 0x00 /* 1st area - frequency... */,
               &freq, 1);

      /* Print frequency */
      printk(", 2.00, %ld", (freq >> 6) + 2400L);

      /* Hack !!! */
      if(freq & 0x20)
        printk(".5");
    }
  else
    {
      printk(", PCMCIA, ");
      switch (psa.psa_subband)
        {
        case PSA_SUBBAND_915:
          printk("915");
          break;
        case PSA_SUBBAND_2425:
          printk("2425");
          break;
        case PSA_SUBBAND_2460:
          printk("2460");
          break;
        case PSA_SUBBAND_2484:
          printk("2484");
          break;
        case PSA_SUBBAND_2430_5:
          printk("2430.5");
          break;
        default:
          printk("unknown");
        }
    }

  printk(" MHz\n");
#endif  /* DEBUG_BASIC_SHOW */

#ifdef DEBUG_VERSION_SHOW
  /* Print version information */
  printk(KERN_NOTICE "%s", version);
#endif
} /* wv_init_info */

/********************* IOCTL, STATS & RECONFIG *********************/
/*
 * We found here routines that are called by Linux on differents
 * occasions after the configuration and not for transmitting data
 * These may be called when the user use ifconfig, /proc/net/dev
 * or wireless extensions
 */

/*------------------------------------------------------------------*/
/*
 * Get the current ethernet statistics. This may be called with the
 * card open or closed.
 * Used when the user read /proc/net/dev
 */
static en_stats *
wavelan_get_stats(struct net_device *   dev)
{
#ifdef DEBUG_IOCTL_TRACE
  printk(KERN_DEBUG "%s: <>wavelan_get_stats()\n", dev->name);
#endif

  return(&((net_local *)netdev_priv(dev))->stats);
}

/*------------------------------------------------------------------*/
/*
 * Set or clear the multicast filter for this adaptor.
 * num_addrs == -1      Promiscuous mode, receive all packets
 * num_addrs == 0       Normal mode, clear multicast list
 * num_addrs > 0        Multicast mode, receive normal and MC packets,
 *                      and do best-effort filtering.
 */

static void
wavelan_set_multicast_list(struct net_device *  dev)
{
  net_local *   lp = netdev_priv(dev);

#ifdef DEBUG_IOCTL_TRACE
  printk(KERN_DEBUG "%s: ->wavelan_set_multicast_list()\n", dev->name);
#endif

#ifdef DEBUG_IOCTL_INFO
  printk(KERN_DEBUG "%s: wavelan_set_multicast_list(): setting Rx mode %02X to %d addresses.\n",
         dev->name, dev->flags, dev->mc_count);
#endif

  if(dev->flags & IFF_PROMISC)
    {
      /*
       * Enable promiscuous mode: receive all packets.
       */
      if(!lp->promiscuous)
        {
          lp->promiscuous = 1;
          lp->allmulticast = 0;
          lp->mc_count = 0;

          wv_82593_reconfig(dev);
        }
    }
  else
    /* If all multicast addresses
     * or too much multicast addresses for the hardware filter */
    if((dev->flags & IFF_ALLMULTI) ||
       (dev->mc_count > I82593_MAX_MULTICAST_ADDRESSES))
      {
        /*
         * Disable promiscuous mode, but active the all multicast mode
         */
        if(!lp->allmulticast)
          {
            lp->promiscuous = 0;
            lp->allmulticast = 1;
            lp->mc_count = 0;

            wv_82593_reconfig(dev);
          }
      }
    else
      /* If there is some multicast addresses to send */
      if(dev->mc_list != (struct dev_mc_list *) NULL)
        {
          /*
           * Disable promiscuous mode, but receive all packets
           * in multicast list
           */
#ifdef MULTICAST_AVOID
          if(lp->promiscuous || lp->allmulticast ||
             (dev->mc_count != lp->mc_count))
#endif
            {
              lp->promiscuous = 0;
              lp->allmulticast = 0;
              lp->mc_count = dev->mc_count;

              wv_82593_reconfig(dev);
            }
        }
      else
        {
          /*
           * Switch to normal mode: disable promiscuous mode and 
           * clear the multicast list.
           */
          if(lp->promiscuous || lp->mc_count == 0)
            {
              lp->promiscuous = 0;
              lp->allmulticast = 0;
              lp->mc_count = 0;

              wv_82593_reconfig(dev);
            }
        }
#ifdef DEBUG_IOCTL_TRACE
  printk(KERN_DEBUG "%s: <-wavelan_set_multicast_list()\n", dev->name);
#endif
}

/*------------------------------------------------------------------*/
/*
 * This function doesn't exist...
 * (Note : it was a nice way to test the reconfigure stuff...)
 */
#ifdef SET_MAC_ADDRESS
static int
wavelan_set_mac_address(struct net_device *     dev,
                        void *          addr)
{
  struct sockaddr *     mac = addr;

  /* Copy the address */
  memcpy(dev->dev_addr, mac->sa_data, WAVELAN_ADDR_SIZE);

  /* Reconfig the beast */
  wv_82593_reconfig(dev);

  return 0;
}
#endif  /* SET_MAC_ADDRESS */


/*------------------------------------------------------------------*/
/*
 * Frequency setting (for hardware able of it)
 * It's a bit complicated and you don't really want to look into it...
 */
static int
wv_set_frequency(u_long         base,   /* i/o port of the card */
                 iw_freq *      frequency)
{
  const int     BAND_NUM = 10;  /* Number of bands */
  long          freq = 0L;      /* offset to 2.4 GHz in .5 MHz */
#ifdef DEBUG_IOCTL_INFO
  int           i;
#endif

  /* Setting by frequency */
  /* Theoritically, you may set any frequency between
   * the two limits with a 0.5 MHz precision. In practice,
   * I don't want you to have trouble with local
   * regulations... */
  if((frequency->e == 1) &&
     (frequency->m >= (int) 2.412e8) && (frequency->m <= (int) 2.487e8))
    {
      freq = ((frequency->m / 10000) - 24000L) / 5;
    }

  /* Setting by channel (same as wfreqsel) */
  /* Warning : each channel is 22MHz wide, so some of the channels
   * will interfere... */
  if((frequency->e == 0) &&
     (frequency->m >= 0) && (frequency->m < BAND_NUM))
    {
      /* Get frequency offset. */
      freq = channel_bands[frequency->m] >> 1;
    }

  /* Verify if the frequency is allowed */
  if(freq != 0L)
    {
      u_short   table[10];      /* Authorized frequency table */

      /* Read the frequency table */
      fee_read(base, 0x71 /* frequency table */,
               table, 10);

#ifdef DEBUG_IOCTL_INFO
      printk(KERN_DEBUG "Frequency table :");
      for(i = 0; i < 10; i++)
        {
          printk(" %04X",
                 table[i]);
        }
      printk("\n");
#endif

      /* Look in the table if the frequency is allowed */
      if(!(table[9 - ((freq - 24) / 16)] &
           (1 << ((freq - 24) % 16))))
        return -EINVAL;         /* not allowed */
    }
  else
    return -EINVAL;

  /* If we get a usable frequency */
  if(freq != 0L)
    {
      unsigned short    area[16];
      unsigned short    dac[2];
      unsigned short    area_verify[16];
      unsigned short    dac_verify[2];
      /* Corresponding gain (in the power adjust value table)
       * see AT&T Wavelan Data Manual, REF 407-024689/E, page 3-8
       * & WCIN062D.DOC, page 6.2.9 */
      unsigned short    power_limit[] = { 40, 80, 120, 160, 0 };
      int               power_band = 0;         /* Selected band */
      unsigned short    power_adjust;           /* Correct value */

      /* Search for the gain */
      power_band = 0;
      while((freq > power_limit[power_band]) &&
            (power_limit[++power_band] != 0))
        ;

      /* Read the first area */
      fee_read(base, 0x00,
               area, 16);

      /* Read the DAC */
      fee_read(base, 0x60,
               dac, 2);

      /* Read the new power adjust value */
      fee_read(base, 0x6B - (power_band >> 1),
               &power_adjust, 1);
      if(power_band & 0x1)
        power_adjust >>= 8;
      else
        power_adjust &= 0xFF;

#ifdef DEBUG_IOCTL_INFO
      printk(KERN_DEBUG "Wavelan EEprom Area 1 :");
      for(i = 0; i < 16; i++)
        {
          printk(" %04X",
                 area[i]);
        }
      printk("\n");

      printk(KERN_DEBUG "Wavelan EEprom DAC : %04X %04X\n",
             dac[0], dac[1]);
#endif

      /* Frequency offset (for info only...) */
      area[0] = ((freq << 5) & 0xFFE0) | (area[0] & 0x1F);

      /* Receiver Principle main divider coefficient */
      area[3] = (freq >> 1) + 2400L - 352L;
      area[2] = ((freq & 0x1) << 4) | (area[2] & 0xFFEF);

      /* Transmitter Main divider coefficient */
      area[13] = (freq >> 1) + 2400L;
      area[12] = ((freq & 0x1) << 4) | (area[2] & 0xFFEF);

      /* Others part of the area are flags, bit streams or unused... */

      /* Set the value in the DAC */
      dac[1] = ((power_adjust >> 1) & 0x7F) | (dac[1] & 0xFF80);
      dac[0] = ((power_adjust & 0x1) << 4) | (dac[0] & 0xFFEF);

      /* Write the first area */
      fee_write(base, 0x00,
                area, 16);

      /* Write the DAC */
      fee_write(base, 0x60,
                dac, 2);

      /* We now should verify here that the EEprom writing was ok */

      /* ReRead the first area */
      fee_read(base, 0x00,
               area_verify, 16);

      /* ReRead the DAC */
      fee_read(base, 0x60,
               dac_verify, 2);

      /* Compare */
      if(memcmp(area, area_verify, 16 * 2) ||
         memcmp(dac, dac_verify, 2 * 2))
        {
#ifdef DEBUG_IOCTL_ERROR
          printk(KERN_INFO "Wavelan: wv_set_frequency : unable to write new frequency to EEprom (?)\n");
#endif
          return -EOPNOTSUPP;
        }

      /* We must download the frequency parameters to the
       * synthetisers (from the EEprom - area 1)
       * Note : as the EEprom is auto decremented, we set the end
       * if the area... */
      mmc_out(base, mmwoff(0, mmw_fee_addr), 0x0F);
      mmc_out(base, mmwoff(0, mmw_fee_ctrl),
              MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD);

      /* Wait until the download is finished */
      fee_wait(base, 100, 100);

      /* We must now download the power adjust value (gain) to
       * the synthetisers (from the EEprom - area 7 - DAC) */
      mmc_out(base, mmwoff(0, mmw_fee_addr), 0x61);
      mmc_out(base, mmwoff(0, mmw_fee_ctrl),
              MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD);

      /* Wait until the download is finished */
      fee_wait(base, 100, 100);

#ifdef DEBUG_IOCTL_INFO
      /* Verification of what we have done... */

      printk(KERN_DEBUG "Wavelan EEprom Area 1 :");
      for(i = 0; i < 16; i++)
        {
          printk(" %04X",
                 area_verify[i]);
        }
      printk("\n");

      printk(KERN_DEBUG "Wavelan EEprom DAC : %04X %04X\n",
             dac_verify[0], dac_verify[1]);
#endif

      return 0;
    }
  else
    return -EINVAL;             /* Bah, never get there... */
}

/*------------------------------------------------------------------*/
/*
 * Give the list of available frequencies
 */
static int
wv_frequency_list(u_long        base,   /* i/o port of the card */
                  iw_freq *     list,   /* List of frequency to fill */
                  int           max)    /* Maximum number of frequencies */
{
  u_short       table[10];      /* Authorized frequency table */
  long          freq = 0L;      /* offset to 2.4 GHz in .5 MHz + 12 MHz */
  int           i;              /* index in the table */
  const int     BAND_NUM = 10;  /* Number of bands */
  int           c = 0;          /* Channel number */

  /* Read the frequency table */
  fee_read(base, 0x71 /* frequency table */,
           table, 10);

  /* Look all frequencies */
  i = 0;
  for(freq = 0; freq < 150; freq++)
    /* Look in the table if the frequency is allowed */
    if(table[9 - (freq / 16)] & (1 << (freq % 16)))
      {
        /* Compute approximate channel number */
        while((((channel_bands[c] >> 1) - 24) < freq) &&
              (c < BAND_NUM))
          c++;
        list[i].i = c;  /* Set the list index */

        /* put in the list */
        list[i].m = (((freq + 24) * 5) + 24000L) * 10000;
        list[i++].e = 1;

        /* Check number */
        if(i >= max)
          return(i);
      }

  return(i);
}

#ifdef IW_WIRELESS_SPY
/*------------------------------------------------------------------*/
/*
 * Gather wireless spy statistics : for each packet, compare the source
 * address with out list, and if match, get the stats...
 * Sorry, but this function really need wireless extensions...
 */
static inline void
wl_spy_gather(struct net_device *       dev,
              u_char *  mac,            /* MAC address */
              u_char *  stats)          /* Statistics to gather */
{
  struct iw_quality wstats;

  wstats.qual = stats[2] & MMR_SGNL_QUAL;
  wstats.level = stats[0] & MMR_SIGNAL_LVL;
  wstats.noise = stats[1] & MMR_SILENCE_LVL;
  wstats.updated = 0x7;

  /* Update spy records */
  wireless_spy_update(dev, mac, &wstats);
}
#endif  /* IW_WIRELESS_SPY */

#ifdef HISTOGRAM
/*------------------------------------------------------------------*/
/*
 * This function calculate an histogram on the signal level.
 * As the noise is quite constant, it's like doing it on the SNR.
 * We have defined a set of interval (lp->his_range), and each time
 * the level goes in that interval, we increment the count (lp->his_sum).
 * With this histogram you may detect if one wavelan is really weak,
 * or you may also calculate the mean and standard deviation of the level...
 */
static inline void
wl_his_gather(struct net_device *       dev,
              u_char *  stats)          /* Statistics to gather */
{
  net_local *   lp = netdev_priv(dev);
  u_char        level = stats[0] & MMR_SIGNAL_LVL;
  int           i;

  /* Find the correct interval */
  i = 0;
  while((i < (lp->his_number - 1)) && (level >= lp->his_range[i++]))
    ;

  /* Increment interval counter */
  (lp->his_sum[i])++;
}
#endif  /* HISTOGRAM */

static void wl_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
{
        strncpy(info->driver, "wavelan_cs", sizeof(info->driver)-1);
}

static const struct ethtool_ops ops = {
        .get_drvinfo = wl_get_drvinfo
};

/*------------------------------------------------------------------*/
/*
 * Wireless Handler : get protocol name
 */
static int wavelan_get_name(struct net_device *dev,
                            struct iw_request_info *info,
                            union iwreq_data *wrqu,
                            char *extra)
{
        strcpy(wrqu->name, "WaveLAN");
        return 0;
}

/*------------------------------------------------------------------*/
/*
 * Wireless Handler : set NWID
 */
static int wavelan_set_nwid(struct net_device *dev,
                            struct iw_request_info *info,
                            union iwreq_data *wrqu,
                            char *extra)
{
        unsigned int base = dev->base_addr;
        net_local *lp = netdev_priv(dev);
        psa_t psa;
        mm_t m;
        unsigned long flags;
        int ret = 0;

        /* Disable interrupts and save flags. */
        spin_lock_irqsave(&lp->spinlock, flags);
        
        /* Set NWID in WaveLAN. */
        if (!wrqu->nwid.disabled) {
                /* Set NWID in psa */
                psa.psa_nwid[0] = (wrqu->nwid.value & 0xFF00) >> 8;
                psa.psa_nwid[1] = wrqu->nwid.value & 0xFF;
                psa.psa_nwid_select = 0x01;
                psa_write(dev,
                          (char *) psa.psa_nwid - (char *) &psa,
                          (unsigned char *) psa.psa_nwid, 3);

                /* Set NWID in mmc. */
                m.w.mmw_netw_id_l = psa.psa_nwid[1];
                m.w.mmw_netw_id_h = psa.psa_nwid[0];
                mmc_write(base,
                          (char *) &m.w.mmw_netw_id_l -
                          (char *) &m,
                          (unsigned char *) &m.w.mmw_netw_id_l, 2);
                mmc_out(base, mmwoff(0, mmw_loopt_sel), 0x00);
        } else {
                /* Disable NWID in the psa. */
                psa.psa_nwid_select = 0x00;
                psa_write(dev,
                          (char *) &psa.psa_nwid_select -
                          (char *) &psa,
                          (unsigned char *) &psa.psa_nwid_select,
                          1);

                /* Disable NWID in the mmc (no filtering). */
                mmc_out(base, mmwoff(0, mmw_loopt_sel),
                        MMW_LOOPT_SEL_DIS_NWID);
        }
        /* update the Wavelan checksum */
        update_psa_checksum(dev);

        /* Enable interrupts and restore flags. */
        spin_unlock_irqrestore(&lp->spinlock, flags);

        return ret;
}

/*------------------------------------------------------------------*/
/*
 * Wireless Handler : get NWID 
 */
static int wavelan_get_nwid(struct net_device *dev,
                            struct iw_request_info *info,
                            union iwreq_data *wrqu,
                            char *extra)
{
        net_local *lp = netdev_priv(dev);
        psa_t psa;
        unsigned long flags;
        int ret = 0;

        /* Disable interrupts and save flags. */
        spin_lock_irqsave(&lp->spinlock, flags);
        
        /* Read the NWID. */
        psa_read(dev,
                 (char *) psa.psa_nwid - (char *) &psa,
                 (unsigned char *) psa.psa_nwid, 3);
        wrqu->nwid.value = (psa.psa_nwid[0] << 8) + psa.psa_nwid[1];
        wrqu->nwid.disabled = !(psa.psa_nwid_select);
        wrqu->nwid.fixed = 1;   /* Superfluous */

        /* Enable interrupts and restore flags. */
        spin_unlock_irqrestore(&lp->spinlock, flags);

        return ret;
}

/*------------------------------------------------------------------*/
/*
 * Wireless Handler : set frequency
 */
static int wavelan_set_freq(struct net_device *dev,
                            struct iw_request_info *info,
                            union iwreq_data *wrqu,
                            char *extra)
{
        unsigned int base = dev->base_addr;
        net_local *lp = netdev_priv(dev);
        unsigned long flags;
        int ret;

        /* Disable interrupts and save flags. */
        spin_lock_irqsave(&lp->spinlock, flags);
        
        /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable). */
        if (!(mmc_in(base, mmroff(0, mmr_fee_status)) &
              (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY)))
                ret = wv_set_frequency(base, &(wrqu->freq));
        else
                ret = -EOPNOTSUPP;

        /* Enable interrupts and restore flags. */
        spin_unlock_irqrestore(&lp->spinlock, flags);

        return ret;
}

/*------------------------------------------------------------------*/
/*
 * Wireless Handler : get frequency
 */
static int wavelan_get_freq(struct net_device *dev,
                            struct iw_request_info *info,
                            union iwreq_data *wrqu,
                            char *extra)
{
        unsigned int base = dev->base_addr;
        net_local *lp = netdev_priv(dev);
        psa_t psa;
        unsigned long flags;
        int ret = 0;

        /* Disable interrupts and save flags. */
        spin_lock_irqsave(&lp->spinlock, flags);
        
        /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable).
         * Does it work for everybody, especially old cards? */
        if (!(mmc_in(base, mmroff(0, mmr_fee_status)) &
              (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) {
                unsigned short freq;

                /* Ask the EEPROM to read the frequency from the first area. */
                fee_read(base, 0x00, &freq, 1);
                wrqu->freq.m = ((freq >> 5) * 5 + 24000L) * 10000;
                wrqu->freq.e = 1;
        } else {
                psa_read(dev,
                         (char *) &psa.psa_subband - (char *) &psa,
                         (unsigned char *) &psa.psa_subband, 1);

                if (psa.psa_subband <= 4) {
                        wrqu->freq.m = fixed_bands[psa.psa_subband];
                        wrqu->freq.e = (psa.psa_subband != 0);
                } else
                        ret = -EOPNOTSUPP;
        }

        /* Enable interrupts and restore flags. */
        spin_unlock_irqrestore(&lp->spinlock, flags);

        return ret;
}

/*------------------------------------------------------------------*/
/*
 * Wireless Handler : set level threshold
 */
static int wavelan_set_sens(struct net_device *dev,
                            struct iw_request_info *info,
                            union iwreq_data *wrqu,
                            char *extra)
{
        unsigned int base = dev->base_addr;
        net_local *lp = netdev_priv(dev);
        psa_t psa;
        unsigned long flags;
        int ret = 0;

        /* Disable interrupts and save flags. */
        spin_lock_irqsave(&lp->spinlock, flags);
        
        /* Set the level threshold. */
        /* We should complain loudly if wrqu->sens.fixed = 0, because we
         * can't set auto mode... */
        psa.psa_thr_pre_set = wrqu->sens.value & 0x3F;
        psa_write(dev,
                  (char *) &psa.psa_thr_pre_set - (char *) &psa,
                  (unsigned char *) &psa.psa_thr_pre_set, 1);
        /* update the Wavelan checksum */
        update_psa_checksum(dev);
        mmc_out(base, mmwoff(0, mmw_thr_pre_set),
                psa.psa_thr_pre_set);

        /* Enable interrupts and restore flags. */
        spin_unlock_irqrestore(&lp->spinlock, flags);

        return ret;
}

/*------------------------------------------------------------------*/
/*
 * Wireless Handler : get level threshold
 */
static int wavelan_get_sens(struct net_device *dev,
                            struct iw_request_info *info,
                            union iwreq_data *wrqu,
                            char *extra)
{
        net_local *lp = netdev_priv(dev);
        psa_t psa;
        unsigned long flags;
        int ret = 0;

        /* Disable interrupts and save flags. */
        spin_lock_irqsave(&lp->spinlock, flags);
        
        /* Read the level threshold. */
        psa_read(dev,
                 (char *) &psa.psa_thr_pre_set - (char *) &psa,
                 (unsigned char *) &psa.psa_thr_pre_set, 1);
        wrqu->sens.value = psa.psa_thr_pre_set & 0x3F;
        wrqu->sens.fixed = 1;

        /* Enable interrupts and restore flags. */
        spin_unlock_irqrestore(&lp->spinlock, flags);

        return ret;
}

/*------------------------------------------------------------------*/
/*
 * Wireless Handler : set encryption key
 */
static int wavelan_set_encode(struct net_device *dev,
                              struct iw_request_info *info,
                              union iwreq_data *wrqu,
                              char *extra)
{
        unsigned int base = dev->base_addr;
        net_local *lp = netdev_priv(dev);
        unsigned long flags;
        psa_t psa;
        int ret = 0;

        /* Disable interrupts and save flags. */
        spin_lock_irqsave(&lp->spinlock, flags);

        /* Check if capable of encryption */
        if (!mmc_encr(base)) {
                ret = -EOPNOTSUPP;
        }

        /* Check the size of the key */
        if((wrqu->encoding.length != 8) && (wrqu->encoding.length != 0)) {
                ret = -EINVAL;
        }

        if(!ret) {
                /* Basic checking... */
                if (wrqu->encoding.length == 8) {
                        /* Copy the key in the driver */
                        memcpy(psa.psa_encryption_key, extra,
                               wrqu->encoding.length);
                        psa.psa_encryption_select = 1;

                        psa_write(dev,
                                  (char *) &psa.psa_encryption_select -
                                  (char *) &psa,
                                  (unsigned char *) &psa.
                                  psa_encryption_select, 8 + 1);

                        mmc_out(base, mmwoff(0, mmw_encr_enable),
                                MMW_ENCR_ENABLE_EN | MMW_ENCR_ENABLE_MODE);
                        mmc_write(base, mmwoff(0, mmw_encr_key),
                                  (unsigned char *) &psa.
                                  psa_encryption_key, 8);
                }

                /* disable encryption */
                if (wrqu->encoding.flags & IW_ENCODE_DISABLED) {
                        psa.psa_encryption_select = 0;
                        psa_write(dev,
                                  (char *) &psa.psa_encryption_select -
                                  (char *) &psa,
                                  (unsigned char *) &psa.
                                  psa_encryption_select, 1);

                        mmc_out(base, mmwoff(0, mmw_encr_enable), 0);
                }
                /* update the Wavelan checksum */
                update_psa_checksum(dev);
        }

        /* Enable interrupts and restore flags. */
        spin_unlock_irqrestore(&lp->spinlock, flags);

        return ret;
}

/*------------------------------------------------------------------*/
/*
 * Wireless Handler : get encryption key
 */
static int wavelan_get_encode(struct net_device *dev,
                              struct iw_request_info *info,
                              union iwreq_data *wrqu,
                              char *extra)
{
        unsigned int base = dev->base_addr;
        net_local *lp = netdev_priv(dev);
        psa_t psa;
        unsigned long flags;
        int ret = 0;

        /* Disable interrupts and save flags. */
        spin_lock_irqsave(&lp->spinlock, flags);
        
        /* Check if encryption is available */
        if (!mmc_encr(base)) {
                ret = -EOPNOTSUPP;
        } else {
                /* Read the encryption key */
                psa_read(dev,
                         (char *) &psa.psa_encryption_select -
                         (char *) &psa,
                         (unsigned char *) &psa.
                         psa_encryption_select, 1 + 8);

                /* encryption is enabled ? */
                if (psa.psa_encryption_select)
                        wrqu->encoding.flags = IW_ENCODE_ENABLED;
                else
                        wrqu->encoding.flags = IW_ENCODE_DISABLED;
                wrqu->encoding.flags |= mmc_encr(base);

                /* Copy the key to the user buffer */
                wrqu->encoding.length = 8;
                memcpy(extra, psa.psa_encryption_key, wrqu->encoding.length);
        }

        /* Enable interrupts and restore flags. */
        spin_unlock_irqrestore(&lp->spinlock, flags);

        return ret;
}

#ifdef WAVELAN_ROAMING_EXT
/*------------------------------------------------------------------*/
/*
 * Wireless Handler : set ESSID (domain)
 */
static int wavelan_set_essid(struct net_device *dev,
                             struct iw_request_info *info,
                             union iwreq_data *wrqu,
                             char *extra)
{
        net_local *lp = netdev_priv(dev);
        unsigned long flags;
        int ret = 0;

        /* Disable interrupts and save flags. */
        spin_lock_irqsave(&lp->spinlock, flags);
        
        /* Check if disable */
        if(wrqu->data.flags == 0)
                lp->filter_domains = 0;
        else {
                char    essid[IW_ESSID_MAX_SIZE + 1];
                char *  endp;

                /* Terminate the string */
                memcpy(essid, extra, wrqu->data.length);
                essid[IW_ESSID_MAX_SIZE] = '\0';

#ifdef DEBUG_IOCTL_INFO
                printk(KERN_DEBUG "SetEssid : ``%s''\n", essid);
#endif  /* DEBUG_IOCTL_INFO */

                /* Convert to a number (note : Wavelan specific) */
                lp->domain_id = simple_strtoul(essid, &endp, 16);
                /* Has it worked  ? */
                if(endp > essid)
                        lp->filter_domains = 1;
                else {
                        lp->filter_domains = 0;
                        ret = -EINVAL;
                }
        }

        /* Enable interrupts and restore flags. */
        spin_unlock_irqrestore(&lp->spinlock, flags);

        return ret;
}

/*------------------------------------------------------------------*/
/*
 * Wireless Handler : get ESSID (domain)
 */
static int wavelan_get_essid(struct net_device *dev,
                             struct iw_request_info *info,
                             union iwreq_data *wrqu,
                             char *extra)
{
        net_local *lp = netdev_priv(dev);

        /* Is the domain ID active ? */
        wrqu->data.flags = lp->filter_domains;

        /* Copy Domain ID into a string (Wavelan specific) */
        /* Sound crazy, be we can't have a snprintf in the kernel !!! */
        sprintf(extra, "%lX", lp->domain_id);
        extra[IW_ESSID_MAX_SIZE] = '\0';

        /* Set the length */
        wrqu->data.length = strlen(extra);

        return 0;
}

/*------------------------------------------------------------------*/
/*
 * Wireless Handler : set AP address
 */
static int wavelan_set_wap(struct net_device *dev,
                           struct iw_request_info *info,
                           union iwreq_data *wrqu,
                           char *extra)
{
#ifdef DEBUG_IOCTL_INFO
        printk(KERN_DEBUG "Set AP to : %02X:%02X:%02X:%02X:%02X:%02X\n",
               wrqu->ap_addr.sa_data[0],
               wrqu->ap_addr.sa_data[1],
               wrqu->ap_addr.sa_data[2],
               wrqu->ap_addr.sa_data[3],
               wrqu->ap_addr.sa_data[4],
               wrqu->ap_addr.sa_data[5]);
#endif  /* DEBUG_IOCTL_INFO */

        return -EOPNOTSUPP;
}

/*------------------------------------------------------------------*/
/*
 * Wireless Handler : get AP address
 */
static int wavelan_get_wap(struct net_device *dev,
                           struct iw_request_info *info,
                           union iwreq_data *wrqu,
                           char *extra)
{
        /* Should get the real McCoy instead of own Ethernet address */
        memcpy(wrqu->ap_addr.sa_data, dev->dev_addr, WAVELAN_ADDR_SIZE);
        wrqu->ap_addr.sa_family = ARPHRD_ETHER;

        return -EOPNOTSUPP;
}
#endif  /* WAVELAN_ROAMING_EXT */

#ifdef WAVELAN_ROAMING
/*------------------------------------------------------------------*/
/*
 * Wireless Handler : set mode
 */
static int wavelan_set_mode(struct net_device *dev,
                            struct iw_request_info *info,
                            union iwreq_data *wrqu,
                            char *extra)
{
        net_local *lp = netdev_priv(dev);
        unsigned long flags;
        int ret = 0;

        /* Disable interrupts and save flags. */
        spin_lock_irqsave(&lp->spinlock, flags);

        /* Check mode */
        switch(wrqu->mode) {
        case IW_MODE_ADHOC:
                if(do_roaming) {
                        wv_roam_cleanup(dev);
                        do_roaming = 0;
                }
                break;
        case IW_MODE_INFRA:
                if(!do_roaming) {
                        wv_roam_init(dev);
                        do_roaming = 1;
                }
                break;
        default:
                ret = -EINVAL;
        }

        /* Enable interrupts and restore flags. */
        spin_unlock_irqrestore(&lp->spinlock, flags);

        return ret;
}

/*------------------------------------------------------------------*/
/*
 * Wireless Handler : get mode
 */
static int wavelan_get_mode(struct net_device *dev,
                            struct iw_request_info *info,
                            union iwreq_data *wrqu,
                            char *extra)
{
        if(do_roaming)
                wrqu->mode = IW_MODE_INFRA;
        else
                wrqu->mode = IW_MODE_ADHOC;

        return 0;
}
#endif  /* WAVELAN_ROAMING */

/*------------------------------------------------------------------*/
/*
 * Wireless Handler : get range info
 */
static int wavelan_get_range(struct net_device *dev,
                             struct iw_request_info *info,
                             union iwreq_data *wrqu,
                             char *extra)
{
        unsigned int base = dev->base_addr;
        net_local *lp = netdev_priv(dev);
        struct iw_range *range = (struct iw_range *) extra;
        unsigned long flags;
        int ret = 0;

        /* Set the length (very important for backward compatibility) */
        wrqu->data.length = sizeof(struct iw_range);

        /* Set all the info we don't care or don't know about to zero */
        memset(range, 0, sizeof(struct iw_range));

        /* Set the Wireless Extension versions */
        range->we_version_compiled = WIRELESS_EXT;
        range->we_version_source = 9;

        /* Set information in the range struct.  */
        range->throughput = 1.4 * 1000 * 1000;  /* don't argue on this ! */
        range->min_nwid = 0x0000;
        range->max_nwid = 0xFFFF;

        range->sensitivity = 0x3F;
        range->max_qual.qual = MMR_SGNL_QUAL;
        range->max_qual.level = MMR_SIGNAL_LVL;
        range->max_qual.noise = MMR_SILENCE_LVL;
        range->avg_qual.qual = MMR_SGNL_QUAL; /* Always max */
        /* Need to get better values for those two */
        range->avg_qual.level = 30;
        range->avg_qual.noise = 8;

        range->num_bitrates = 1;
        range->bitrate[0] = 2000000;    /* 2 Mb/s */

        /* Event capability (kernel + driver) */
        range->event_capa[0] = (IW_EVENT_CAPA_MASK(0x8B02) |
                                IW_EVENT_CAPA_MASK(0x8B04) |
                                IW_EVENT_CAPA_MASK(0x8B06));
        range->event_capa[1] = IW_EVENT_CAPA_K_1;

        /* Disable interrupts and save flags. */
        spin_lock_irqsave(&lp->spinlock, flags);
        
        /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable). */
        if (!(mmc_in(base, mmroff(0, mmr_fee_status)) &
              (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) {
                range->num_channels = 10;
                range->num_frequency = wv_frequency_list(base, range->freq,
                                                        IW_MAX_FREQUENCIES);
        } else
                range->num_channels = range->num_frequency = 0;

        /* Encryption supported ? */
        if (mmc_encr(base)) {
                range->encoding_size[0] = 8;    /* DES = 64 bits key */
                range->num_encoding_sizes = 1;
                range->max_encoding_tokens = 1; /* Only one key possible */
        } else {
                range->num_encoding_sizes = 0;
                range->max_encoding_tokens = 0;
        }

        /* Enable interrupts and restore flags. */
        spin_unlock_irqrestore(&lp->spinlock, flags);

        return ret;
}

/*------------------------------------------------------------------*/
/*
 * Wireless Private Handler : set quality threshold
 */
static int wavelan_set_qthr(struct net_device *dev,
                            struct iw_request_info *info,
                            union iwreq_data *wrqu,
                            char *extra)
{
        unsigned int base = dev->base_addr;
        net_local *lp = netdev_priv(dev);
        psa_t psa;
        unsigned long flags;

        /* Disable interrupts and save flags. */
        spin_lock_irqsave(&lp->spinlock, flags);
        
        psa.psa_quality_thr = *(extra) & 0x0F;
        psa_write(dev,
                  (char *) &psa.psa_quality_thr - (char *) &psa,
                  (unsigned char *) &psa.psa_quality_thr, 1);
        /* update the Wavelan checksum */
        update_psa_checksum(dev);
        mmc_out(base, mmwoff(0, mmw_quality_thr),
                psa.psa_quality_thr);

        /* Enable interrupts and restore flags. */
        spin_unlock_irqrestore(&lp->spinlock, flags);

        return 0;
}

/*------------------------------------------------------------------*/
/*
 * Wireless Private Handler : get quality threshold
 */
static int wavelan_get_qthr(struct net_device *dev,
                            struct iw_request_info *info,
                            union iwreq_data *wrqu,
                            char *extra)
{
        net_local *lp = netdev_priv(dev);
        psa_t psa;
        unsigned long flags;

        /* Disable interrupts and save flags. */
        spin_lock_irqsave(&lp->spinlock, flags);
        
        psa_read(dev,
                 (char *) &psa.psa_quality_thr - (char *) &psa,
                 (unsigned char *) &psa.psa_quality_thr, 1);
        *(extra) = psa.psa_quality_thr & 0x0F;

        /* Enable interrupts and restore flags. */
        spin_unlock_irqrestore(&lp->spinlock, flags);

        return 0;
}

#ifdef WAVELAN_ROAMING
/*------------------------------------------------------------------*/
/*
 * Wireless Private Handler : set roaming
 */
static int wavelan_set_roam(struct net_device *dev,
                            struct iw_request_info *info,
                            union iwreq_data *wrqu,
                            char *extra)
{
        net_local *lp = netdev_priv(dev);
        unsigned long flags;

        /* Disable interrupts and save flags. */
        spin_lock_irqsave(&lp->spinlock, flags);
        
        /* Note : should check if user == root */
        if(do_roaming && (*extra)==0)
                wv_roam_cleanup(dev);
        else if(do_roaming==0 && (*extra)!=0)
                wv_roam_init(dev);

        do_roaming = (*extra);

        /* Enable interrupts and restore flags. */
        spin_unlock_irqrestore(&lp->spinlock, flags);

        return 0;
}

/*------------------------------------------------------------------*/
/*
 * Wireless Private Handler : get quality threshold
 */
static int wavelan_get_roam(struct net_device *dev,
                            struct iw_request_info *info,
                            union iwreq_data *wrqu,
                            char *extra)
{
        *(extra) = do_roaming;

        return 0;
}
#endif  /* WAVELAN_ROAMING */

#ifdef HISTOGRAM
/*------------------------------------------------------------------*/
/*
 * Wireless Private Handler : set histogram
 */
static int wavelan_set_histo(struct net_device *dev,
                             struct iw_request_info *info,
                             union iwreq_data *wrqu,
                             char *extra)
{
        net_local *lp = netdev_priv(dev);

        /* Check the number of intervals. */
        if (wrqu->data.length > 16) {
                return(-E2BIG);
        }

        /* Disable histo while we copy the addresses.
         * As we don't disable interrupts, we need to do this */
        lp->his_number = 0;

        /* Are there ranges to copy? */
        if (wrqu->data.length > 0) {
                /* Copy interval ranges to the driver */
                memcpy(lp->his_range, extra, wrqu->data.length);

                {
                  int i;
                  printk(KERN_DEBUG "Histo :");
                  for(i = 0; i < wrqu->data.length; i++)
                    printk(" %d", lp->his_range[i]);
                  printk("\n");
                }

                /* Reset result structure. */
                memset(lp->his_sum, 0x00, sizeof(long) * 16);
        }

        /* Now we can set the number of ranges */
        lp->his_number = wrqu->data.length;

        return(0);
}

/*------------------------------------------------------------------*/
/*
 * Wireless Private Handler : get histogram
 */
static int wavelan_get_histo(struct net_device *dev,
                             struct iw_request_info *info,
                             union iwreq_data *wrqu,
                             char *extra)
{
        net_local *lp = netdev_priv(dev);

        /* Set the number of intervals. */
        wrqu->data.length = lp->his_number;

        /* Give back the distribution statistics */
        if(lp->his_number > 0)
                memcpy(extra, lp->his_sum, sizeof(long) * lp->his_number);

        return(0);
}
#endif                  /* HISTOGRAM */

/*------------------------------------------------------------------*/
/*
 * Structures to export the Wireless Handlers
 */

static const struct iw_priv_args wavelan_private_args[] = {
/*{ cmd,         set_args,                            get_args, name } */
  { SIOCSIPQTHR, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, 0, "setqualthr" },
  { SIOCGIPQTHR, 0, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, "getqualthr" },
  { SIOCSIPROAM, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, 0, "setroam" },
  { SIOCGIPROAM, 0, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, "getroam" },
  { SIOCSIPHISTO, IW_PRIV_TYPE_BYTE | 16,                    0, "sethisto" },
  { SIOCGIPHISTO, 0,                     IW_PRIV_TYPE_INT | 16, "gethisto" },
};

static const iw_handler         wavelan_handler[] =
{
        NULL,                           /* SIOCSIWNAME */
        wavelan_get_name,               /* SIOCGIWNAME */
        wavelan_set_nwid,               /* SIOCSIWNWID */
        wavelan_get_nwid,               /* SIOCGIWNWID */
        wavelan_set_freq,               /* SIOCSIWFREQ */
        wavelan_get_freq,               /* SIOCGIWFREQ */
#ifdef WAVELAN_ROAMING
        wavelan_set_mode,               /* SIOCSIWMODE */
        wavelan_get_mode,               /* SIOCGIWMODE */
#else   /* WAVELAN_ROAMING */
        NULL,                           /* SIOCSIWMODE */
        NULL,                           /* SIOCGIWMODE */
#endif  /* WAVELAN_ROAMING */
        wavelan_set_sens,               /* SIOCSIWSENS */
        wavelan_get_sens,               /* SIOCGIWSENS */
        NULL,                           /* SIOCSIWRANGE */
        wavelan_get_range,              /* SIOCGIWRANGE */
        NULL,                           /* SIOCSIWPRIV */
        NULL,                           /* SIOCGIWPRIV */
        NULL,                           /* SIOCSIWSTATS */
        NULL,                           /* SIOCGIWSTATS */
        iw_handler_set_spy,             /* SIOCSIWSPY */
        iw_handler_get_spy,             /* SIOCGIWSPY */
        iw_handler_set_thrspy,          /* SIOCSIWTHRSPY */
        iw_handler_get_thrspy,          /* SIOCGIWTHRSPY */
#ifdef WAVELAN_ROAMING_EXT
        wavelan_set_wap,                /* SIOCSIWAP */
        wavelan_get_wap,                /* SIOCGIWAP */
        NULL,                           /* -- hole -- */
        NULL,                           /* SIOCGIWAPLIST */
        NULL,                           /* -- hole -- */
        NULL,                           /* -- hole -- */
        wavelan_set_essid,              /* SIOCSIWESSID */
        wavelan_get_essid,              /* SIOCGIWESSID */
#else   /* WAVELAN_ROAMING_EXT */
        NULL,                           /* SIOCSIWAP */
        NULL,                           /* SIOCGIWAP */
        NULL,                           /* -- hole -- */
        NULL,                           /* SIOCGIWAPLIST */
        NULL,                           /* -- hole -- */
        NULL,                           /* -- hole -- */
        NULL,                           /* SIOCSIWESSID */
        NULL,                           /* SIOCGIWESSID */
#endif  /* WAVELAN_ROAMING_EXT */
        NULL,                           /* SIOCSIWNICKN */
        NULL,                           /* SIOCGIWNICKN */
        NULL,                           /* -- hole -- */
        NULL,                           /* -- hole -- */
        NULL,                           /* SIOCSIWRATE */
        NULL,                           /* SIOCGIWRATE */
        NULL,                           /* SIOCSIWRTS */
        NULL,                           /* SIOCGIWRTS */
        NULL,                           /* SIOCSIWFRAG */
        NULL,                           /* SIOCGIWFRAG */
        NULL,                           /* SIOCSIWTXPOW */
        NULL,                           /* SIOCGIWTXPOW */
        NULL,                           /* SIOCSIWRETRY */
        NULL,                           /* SIOCGIWRETRY */
        wavelan_set_encode,             /* SIOCSIWENCODE */
        wavelan_get_encode,             /* SIOCGIWENCODE */
};

static const iw_handler         wavelan_private_handler[] =
{
        wavelan_set_qthr,               /* SIOCIWFIRSTPRIV */
        wavelan_get_qthr,               /* SIOCIWFIRSTPRIV + 1 */
#ifdef WAVELAN_ROAMING
        wavelan_set_roam,               /* SIOCIWFIRSTPRIV + 2 */
        wavelan_get_roam,               /* SIOCIWFIRSTPRIV + 3 */
#else   /* WAVELAN_ROAMING */
        NULL,                           /* SIOCIWFIRSTPRIV + 2 */
        NULL,                           /* SIOCIWFIRSTPRIV + 3 */
#endif  /* WAVELAN_ROAMING */
#ifdef HISTOGRAM
        wavelan_set_histo,              /* SIOCIWFIRSTPRIV + 4 */
        wavelan_get_histo,              /* SIOCIWFIRSTPRIV + 5 */
#endif  /* HISTOGRAM */
};

static const struct iw_handler_def      wavelan_handler_def =
{
        .num_standard   = ARRAY_SIZE(wavelan_handler),
        .num_private    = ARRAY_SIZE(wavelan_private_handler),
        .num_private_args = ARRAY_SIZE(wavelan_private_args),
        .standard       = wavelan_handler,
        .private        = wavelan_private_handler,
        .private_args   = wavelan_private_args,
        .get_wireless_stats = wavelan_get_wireless_stats,
};

/*------------------------------------------------------------------*/
/*
 * Get wireless statistics
 * Called by /proc/net/wireless...
 */
static iw_stats *
wavelan_get_wireless_stats(struct net_device *  dev)
{
  unsigned int          base = dev->base_addr;
  net_local *           lp = netdev_priv(dev);
  mmr_t                 m;
  iw_stats *            wstats;
  unsigned long         flags;

#ifdef DEBUG_IOCTL_TRACE
  printk(KERN_DEBUG "%s: ->wavelan_get_wireless_stats()\n", dev->name);
#endif

  /* Disable interrupts & save flags */
  spin_lock_irqsave(&lp->spinlock, flags);

  wstats = &lp->wstats;

  /* Get data from the mmc */
  mmc_out(base, mmwoff(0, mmw_freeze), 1);

  mmc_read(base, mmroff(0, mmr_dce_status), &m.mmr_dce_status, 1);
  mmc_read(base, mmroff(0, mmr_wrong_nwid_l), &m.mmr_wrong_nwid_l, 2);
  mmc_read(base, mmroff(0, mmr_thr_pre_set), &m.mmr_thr_pre_set, 4);

  mmc_out(base, mmwoff(0, mmw_freeze), 0);

  /* Copy data to wireless stuff */
  wstats->status = m.mmr_dce_status & MMR_DCE_STATUS;
  wstats->qual.qual = m.mmr_sgnl_qual & MMR_SGNL_QUAL;
  wstats->qual.level = m.mmr_signal_lvl & MMR_SIGNAL_LVL;
  wstats->qual.noise = m.mmr_silence_lvl & MMR_SILENCE_LVL;
  wstats->qual.updated = (((m.mmr_signal_lvl & MMR_SIGNAL_LVL_VALID) >> 7) |
                          ((m.mmr_signal_lvl & MMR_SIGNAL_LVL_VALID) >> 6) |
                          ((m.mmr_silence_lvl & MMR_SILENCE_LVL_VALID) >> 5));
  wstats->discard.nwid += (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l;
  wstats->discard.code = 0L;
  wstats->discard.misc = 0L;

  /* ReEnable interrupts & restore flags */
  spin_unlock_irqrestore(&lp->spinlock, flags);

#ifdef DEBUG_IOCTL_TRACE
  printk(KERN_DEBUG "%s: <-wavelan_get_wireless_stats()\n", dev->name);
#endif
  return &lp->wstats;
}

/************************* PACKET RECEPTION *************************/
/*
 * This part deal with receiving the packets.
 * The interrupt handler get an interrupt when a packet has been
 * successfully received and called this part...
 */

/*------------------------------------------------------------------*/
/*
 * Calculate the starting address of the frame pointed to by the receive
 * frame pointer and verify that the frame seem correct
 * (called by wv_packet_rcv())
 */
static int
wv_start_of_frame(struct net_device *   dev,
                  int           rfp,    /* end of frame */
                  int           wrap)   /* start of buffer */
{
  unsigned int  base = dev->base_addr;
  int           rp;
  int           len;

  rp = (rfp - 5 + RX_SIZE) % RX_SIZE;
  outb(rp & 0xff, PIORL(base));
  outb(((rp >> 8) & PIORH_MASK), PIORH(base));
  len = inb(PIOP(base));
  len |= inb(PIOP(base)) << 8;

  /* Sanity checks on size */
  /* Frame too big */
  if(len > MAXDATAZ + 100)
    {
#ifdef DEBUG_RX_ERROR
      printk(KERN_INFO "%s: wv_start_of_frame: Received frame too large, rfp %d len 0x%x\n",
             dev->name, rfp, len);
#endif
      return(-1);
    }
  
  /* Frame too short */
  if(len < 7)
    {
#ifdef DEBUG_RX_ERROR
      printk(KERN_INFO "%s: wv_start_of_frame: Received null frame, rfp %d len 0x%x\n",
             dev->name, rfp, len);
#endif
      return(-1);
    }
  
  /* Wrap around buffer */
  if(len > ((wrap - (rfp - len) + RX_SIZE) % RX_SIZE))  /* magic formula ! */
    {
#ifdef DEBUG_RX_ERROR
      printk(KERN_INFO "%s: wv_start_of_frame: wrap around buffer, wrap %d rfp %d len 0x%x\n",
             dev->name, wrap, rfp, len);
#endif
      return(-1);
    }

  return((rp - len + RX_SIZE) % RX_SIZE);
} /* wv_start_of_frame */

/*------------------------------------------------------------------*/
/*
 * This routine does the actual copy of data (including the ethernet
 * header structure) from the WaveLAN card to an sk_buff chain that
 * will be passed up to the network interface layer. NOTE: We
 * currently don't handle trailer protocols (neither does the rest of
 * the network interface), so if that is needed, it will (at least in
 * part) be added here.  The contents of the receive ring buffer are
 * copied to a message chain that is then passed to the kernel.
 *
 * Note: if any errors occur, the packet is "dropped on the floor"
 * (called by wv_packet_rcv())
 */
static void
wv_packet_read(struct net_device *              dev,
               int              fd_p,
               int              sksize)
{
  net_local *           lp = netdev_priv(dev);
  struct sk_buff *      skb;

#ifdef DEBUG_RX_TRACE
  printk(KERN_DEBUG "%s: ->wv_packet_read(0x%X, %d)\n",
         dev->name, fd_p, sksize);
#endif

  /* Allocate some buffer for the new packet */
  if((skb = dev_alloc_skb(sksize+2)) == (struct sk_buff *) NULL)
    {
#ifdef DEBUG_RX_ERROR
      printk(KERN_INFO "%s: wv_packet_read(): could not alloc_skb(%d, GFP_ATOMIC)\n",
             dev->name, sksize);
#endif
      lp->stats.rx_dropped++;
      /*
       * Not only do we want to return here, but we also need to drop the
       * packet on the floor to clear the interrupt.
       */
      return;
    }

  skb_reserve(skb, 2);
  fd_p = read_ringbuf(dev, fd_p, (char *) skb_put(skb, sksize), sksize);
  skb->protocol = eth_type_trans(skb, dev);

#ifdef DEBUG_RX_INFO
  wv_packet_info(skb_mac_header(skb), sksize, dev->name, "wv_packet_read");
#endif  /* DEBUG_RX_INFO */
     
  /* Statistics gathering & stuff associated.
   * It seem a bit messy with all the define, but it's really simple... */
  if(
#ifdef IW_WIRELESS_SPY
     (lp->spy_data.spy_number > 0) ||
#endif  /* IW_WIRELESS_SPY */
#ifdef HISTOGRAM
     (lp->his_number > 0) ||
#endif  /* HISTOGRAM */
#ifdef WAVELAN_ROAMING
     (do_roaming) ||
#endif  /* WAVELAN_ROAMING */
     0)
    {
      u_char    stats[3];       /* Signal level, Noise level, Signal quality */

      /* read signal level, silence level and signal quality bytes */
      fd_p = read_ringbuf(dev, (fd_p + 4) % RX_SIZE + RX_BASE,
                          stats, 3);
#ifdef DEBUG_RX_INFO
      printk(KERN_DEBUG "%s: wv_packet_read(): Signal level %d/63, Silence level %d/63, signal quality %d/16\n",
             dev->name, stats[0] & 0x3F, stats[1] & 0x3F, stats[2] & 0x0F);
#endif

#ifdef WAVELAN_ROAMING
      if(do_roaming)
        if(WAVELAN_BEACON(skb->data))
          wl_roam_gather(dev, skb->data, stats);
#endif  /* WAVELAN_ROAMING */
          
#ifdef WIRELESS_SPY
      wl_spy_gather(dev, skb_mac_header(skb) + WAVELAN_ADDR_SIZE, stats);
#endif  /* WIRELESS_SPY */
#ifdef HISTOGRAM
      wl_his_gather(dev, stats);
#endif  /* HISTOGRAM */
    }

  /*
   * Hand the packet to the Network Module
   */
  netif_rx(skb);

  /* Keep stats up to date */
  dev->last_rx = jiffies;
  lp->stats.rx_packets++;
  lp->stats.rx_bytes += sksize;

#ifdef DEBUG_RX_TRACE
  printk(KERN_DEBUG "%s: <-wv_packet_read()\n", dev->name);
#endif
  return;
}

/*------------------------------------------------------------------*/
/*
 * This routine is called by the interrupt handler to initiate a
 * packet transfer from the card to the network interface layer above
 * this driver.  This routine checks if a buffer has been successfully
 * received by the WaveLAN card.  If so, the routine wv_packet_read is
 * called to do the actual transfer of the card's data including the
 * ethernet header into a packet consisting of an sk_buff chain.
 * (called by wavelan_interrupt())
 * Note : the spinlock is already grabbed for us and irq are disabled.
 */
static void
wv_packet_rcv(struct net_device *       dev)
{
  unsigned int  base = dev->base_addr;
  net_local *   lp = netdev_priv(dev);
  int           newrfp;
  int           rp;
  int           len;
  int           f_start;
  int           status;
  int           i593_rfp;
  int           stat_ptr;
  u_char        c[4];

#ifdef DEBUG_RX_TRACE
  printk(KERN_DEBUG "%s: ->wv_packet_rcv()\n", dev->name);
#endif

  /* Get the new receive frame pointer from the i82593 chip */
  outb(CR0_STATUS_2 | OP0_NOP, LCCR(base));
  i593_rfp = inb(LCSR(base));
  i593_rfp |= inb(LCSR(base)) << 8;
  i593_rfp %= RX_SIZE;

  /* Get the new receive frame pointer from the WaveLAN card.
   * It is 3 bytes more than the increment of the i82593 receive
   * frame pointer, for each packet. This is because it includes the
   * 3 roaming bytes added by the mmc.
   */
  newrfp = inb(RPLL(base));
  newrfp |= inb(RPLH(base)) << 8;
  newrfp %= RX_SIZE;

#ifdef DEBUG_RX_INFO
  printk(KERN_DEBUG "%s: wv_packet_rcv(): i593_rfp %d stop %d newrfp %d lp->rfp %d\n",
         dev->name, i593_rfp, lp->stop, newrfp, lp->rfp);
#endif

#ifdef DEBUG_RX_ERROR
  /* If no new frame pointer... */
  if(lp->overrunning || newrfp == lp->rfp)
    printk(KERN_INFO "%s: wv_packet_rcv(): no new frame: i593_rfp %d stop %d newrfp %d lp->rfp %d\n",
           dev->name, i593_rfp, lp->stop, newrfp, lp->rfp);
#endif

  /* Read all frames (packets) received */
  while(newrfp != lp->rfp)
    {
      /* A frame is composed of the packet, followed by a status word,
       * the length of the frame (word) and the mmc info (SNR & qual).
       * It's because the length is at the end that we can only scan
       * frames backward. */

      /* Find the first frame by skipping backwards over the frames */
      rp = newrfp;      /* End of last frame */
      while(((f_start = wv_start_of_frame(dev, rp, newrfp)) != lp->rfp) &&
            (f_start != -1))
          rp = f_start;

      /* If we had a problem */
      if(f_start == -1)
        {
#ifdef DEBUG_RX_ERROR
          printk(KERN_INFO "wavelan_cs: cannot find start of frame ");
          printk(" i593_rfp %d stop %d newrfp %d lp->rfp %d\n",
                 i593_rfp, lp->stop, newrfp, lp->rfp);
#endif
          lp->rfp = rp;         /* Get to the last usable frame */
          continue;
        }

      /* f_start point to the beggining of the first frame received
       * and rp to the beggining of the next one */

      /* Read status & length of the frame */
      stat_ptr = (rp - 7 + RX_SIZE) % RX_SIZE;
      stat_ptr = read_ringbuf(dev, stat_ptr, c, 4);
      status = c[0] | (c[1] << 8);
      len = c[2] | (c[3] << 8);

      /* Check status */
      if((status & RX_RCV_OK) != RX_RCV_OK)
        {
          lp->stats.rx_errors++;
          if(status & RX_NO_SFD)
            lp->stats.rx_frame_errors++;
          if(status & RX_CRC_ERR)
            lp->stats.rx_crc_errors++;
          if(status & RX_OVRRUN)
            lp->stats.rx_over_errors++;

#ifdef DEBUG_RX_FAIL
          printk(KERN_DEBUG "%s: wv_packet_rcv(): packet not received ok, status = 0x%x\n",
                 dev->name, status);
#endif
        }
      else
        /* Read the packet and transmit to Linux */
        wv_packet_read(dev, f_start, len - 2);

      /* One frame has been processed, skip it */
      lp->rfp = rp;
    }

  /*
   * Update the frame stop register, but set it to less than
   * the full 8K to allow space for 3 bytes of signal strength
   * per packet.
   */
  lp->stop = (i593_rfp + RX_SIZE - ((RX_SIZE / 64) * 3)) % RX_SIZE;
  outb(OP0_SWIT_TO_PORT_1 | CR0_CHNL, LCCR(base));
  outb(CR1_STOP_REG_UPDATE | (lp->stop >> RX_SIZE_SHIFT), LCCR(base));
  outb(OP1_SWIT_TO_PORT_0, LCCR(base));

#ifdef DEBUG_RX_TRACE
  printk(KERN_DEBUG "%s: <-wv_packet_rcv()\n", dev->name);
#endif
}

/*********************** PACKET TRANSMISSION ***********************/
/*
 * This part deal with sending packet through the wavelan
 * We copy the packet to the send buffer and then issue the send
 * command to the i82593. The result of this operation will be
 * checked in wavelan_interrupt()
 */

/*------------------------------------------------------------------*/
/*
 * This routine fills in the appropriate registers and memory
 * locations on the WaveLAN card and starts the card off on
 * the transmit.
 * (called in wavelan_packet_xmit())
 */
static void
wv_packet_write(struct net_device *     dev,
                void *          buf,
                short           length)
{
  net_local *           lp = netdev_priv(dev);
  unsigned int          base = dev->base_addr;
  unsigned long         flags;
  int                   clen = length;
  register u_short      xmtdata_base = TX_BASE;

#ifdef DEBUG_TX_TRACE
  printk(KERN_DEBUG "%s: ->wv_packet_write(%d)\n", dev->name, length);
#endif

  spin_lock_irqsave(&lp->spinlock, flags);

  /* Write the length of data buffer followed by the buffer */
  outb(xmtdata_base & 0xff, PIORL(base));
  outb(((xmtdata_base >> 8) & PIORH_MASK) | PIORH_SEL_TX, PIORH(base));
  outb(clen & 0xff, PIOP(base));        /* lsb */
  outb(clen >> 8, PIOP(base));          /* msb */

  /* Send the data */
  outsb(PIOP(base), buf, clen);

  /* Indicate end of transmit chain */
  outb(OP0_NOP, PIOP(base));
  /* josullvn@cs.cmu.edu: need to send a second NOP for alignment... */
  outb(OP0_NOP, PIOP(base));

  /* Reset the transmit DMA pointer */
  hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET);
  hacr_write(base, HACR_DEFAULT);
  /* Send the transmit command */
  wv_82593_cmd(dev, "wv_packet_write(): transmit",
               OP0_TRANSMIT, SR0_NO_RESULT);

  /* Make sure the watchdog will keep quiet for a while */
  dev->trans_start = jiffies;

  /* Keep stats up to date */
  lp->stats.tx_bytes += length;

  spin_unlock_irqrestore(&lp->spinlock, flags);

#ifdef DEBUG_TX_INFO
  wv_packet_info((u_char *) buf, length, dev->name, "wv_packet_write");
#endif  /* DEBUG_TX_INFO */

#ifdef DEBUG_TX_TRACE
  printk(KERN_DEBUG "%s: <-wv_packet_write()\n", dev->name);
#endif
}

/*------------------------------------------------------------------*/
/*
 * This routine is called when we want to send a packet (NET3 callback)
 * In this routine, we check if the harware is ready to accept
 * the packet. We also prevent reentrance. Then, we call the function
 * to send the packet...
 */
static int
wavelan_packet_xmit(struct sk_buff *    skb,
                    struct net_device *         dev)
{
  net_local *           lp = netdev_priv(dev);
  unsigned long         flags;

#ifdef DEBUG_TX_TRACE
  printk(KERN_DEBUG "%s: ->wavelan_packet_xmit(0x%X)\n", dev->name,
         (unsigned) skb);
#endif

  /*
   * Block a timer-based transmit from overlapping a previous transmit.
   * In other words, prevent reentering this routine.
   */
  netif_stop_queue(dev);

  /* If somebody has asked to reconfigure the controller,
   * we can do it now */
  if(lp->reconfig_82593)
    {
      spin_lock_irqsave(&lp->spinlock, flags);  /* Disable interrupts */
      wv_82593_config(dev);
      spin_unlock_irqrestore(&lp->spinlock, flags);     /* Re-enable interrupts */
      /* Note : the configure procedure was totally synchronous,
       * so the Tx buffer is now free */
    }

#ifdef DEBUG_TX_ERROR
        if (skb->next)
                printk(KERN_INFO "skb has next\n");
#endif

        /* Check if we need some padding */
        /* Note : on wireless the propagation time is in the order of 1us,
         * and we don't have the Ethernet specific requirement of beeing
         * able to detect collisions, therefore in theory we don't really
         * need to pad. Jean II */
        if (skb_padto(skb, ETH_ZLEN))
                return 0;

  wv_packet_write(dev, skb->data, skb->len);

  dev_kfree_skb(skb);

#ifdef DEBUG_TX_TRACE
  printk(KERN_DEBUG "%s: <-wavelan_packet_xmit()\n", dev->name);
#endif
  return(0);
}

/********************** HARDWARE CONFIGURATION **********************/
/*
 * This part do the real job of starting and configuring the hardware.
 */

/*------------------------------------------------------------------*/
/*
 * Routine to initialize the Modem Management Controller.
 * (called by wv_hw_config())
 */
static int
wv_mmc_init(struct net_device * dev)
{
  unsigned int  base = dev->base_addr;
  psa_t         psa;
  mmw_t         m;
  int           configured;
  int           i;              /* Loop counter */

#ifdef DEBUG_CONFIG_TRACE
  printk(KERN_DEBUG "%s: ->wv_mmc_init()\n", dev->name);
#endif

  /* Read the parameter storage area */
  psa_read(dev, 0, (unsigned char *) &psa, sizeof(psa));

  /*
   * Check the first three octets of the MAC addr for the manufacturer's code.
   * Note: If you get the error message below, you've got a
   * non-NCR/AT&T/Lucent PCMCIA cards, see wavelan_cs.h for detail on
   * how to configure your card...
   */
  for (i = 0; i < ARRAY_SIZE(MAC_ADDRESSES); i++)
    if ((psa.psa_univ_mac_addr[0] == MAC_ADDRESSES[i][0]) &&
        (psa.psa_univ_mac_addr[1] == MAC_ADDRESSES[i][1]) &&
        (psa.psa_univ_mac_addr[2] == MAC_ADDRESSES[i][2]))
      break;

  /* If we have not found it... */
  if (i == ARRAY_SIZE(MAC_ADDRESSES))
    {
#ifdef DEBUG_CONFIG_ERRORS
      printk(KERN_WARNING "%s: wv_mmc_init(): Invalid MAC address: %02X:%02X:%02X:...\n",
             dev->name, psa.psa_univ_mac_addr[0],
             psa.psa_univ_mac_addr[1], psa.psa_univ_mac_addr[2]);
#endif
      return FALSE;
    }

  /* Get the MAC address */
  memcpy(&dev->dev_addr[0], &psa.psa_univ_mac_addr[0], WAVELAN_ADDR_SIZE);

#ifdef USE_PSA_CONFIG
  configured = psa.psa_conf_status & 1;
#else
  configured = 0;
#endif

  /* Is the PSA is not configured */
  if(!configured)
    {
      /* User will be able to configure NWID after (with iwconfig) */
      psa.psa_nwid[0] = 0;
      psa.psa_nwid[1] = 0;

      /* As NWID is not set : no NWID checking */
      psa.psa_nwid_select = 0;

      /* Disable encryption */
      psa.psa_encryption_select = 0;

      /* Set to standard values
       * 0x04 for AT,
       * 0x01 for MCA,
       * 0x04 for PCMCIA and 2.00 card (AT&T 407-024689/E document)
       */
      if (psa.psa_comp_number & 1)
        psa.psa_thr_pre_set = 0x01;
      else
        psa.psa_thr_pre_set = 0x04;
      psa.psa_quality_thr = 0x03;

      /* It is configured */
      psa.psa_conf_status |= 1;

#ifdef USE_PSA_CONFIG
      /* Write the psa */
      psa_write(dev, (char *)psa.psa_nwid - (char *)&psa,
                (unsigned char *)psa.psa_nwid, 4);
      psa_write(dev, (char *)&psa.psa_thr_pre_set - (char *)&psa,
                (unsigned char *)&psa.psa_thr_pre_set, 1);
      psa_write(dev, (char *)&psa.psa_quality_thr - (char *)&psa,
                (unsigned char *)&psa.psa_quality_thr, 1);
      psa_write(dev, (char *)&psa.psa_conf_status - (char *)&psa,
                (unsigned char *)&psa.psa_conf_status, 1);
      /* update the Wavelan checksum */
      update_psa_checksum(dev);
#endif  /* USE_PSA_CONFIG */
    }

  /* Zero the mmc structure */
  memset(&m, 0x00, sizeof(m));

  /* Copy PSA info to the mmc */
  m.mmw_netw_id_l = psa.psa_nwid[1];
  m.mmw_netw_id_h = psa.psa_nwid[0];
  
  if(psa.psa_nwid_select & 1)
    m.mmw_loopt_sel = 0x00;
  else
    m.mmw_loopt_sel = MMW_LOOPT_SEL_DIS_NWID;

  memcpy(&m.mmw_encr_key, &psa.psa_encryption_key, 
         sizeof(m.mmw_encr_key));

  if(psa.psa_encryption_select)
    m.mmw_encr_enable = MMW_ENCR_ENABLE_EN | MMW_ENCR_ENABLE_MODE;
  else
    m.mmw_encr_enable = 0;

  m.mmw_thr_pre_set = psa.psa_thr_pre_set & 0x3F;
  m.mmw_quality_thr = psa.psa_quality_thr & 0x0F;

  /*
   * Set default modem control parameters.
   * See NCR document 407-0024326 Rev. A.
   */
  m.mmw_jabber_enable = 0x01;
  m.mmw_anten_sel = MMW_ANTEN_SEL_ALG_EN;
  m.mmw_ifs = 0x20;
  m.mmw_mod_delay = 0x04;
  m.mmw_jam_time = 0x38;

  m.mmw_des_io_invert = 0;
  m.mmw_freeze = 0;
  m.mmw_decay_prm = 0;
  m.mmw_decay_updat_prm = 0;

  /* Write all info to mmc */
  mmc_write(base, 0, (u_char *)&m, sizeof(m));

  /* The following code start the modem of the 2.00 frequency
   * selectable cards at power on. It's not strictly needed for the
   * following boots...
   * The original patch was by Joe Finney for the PCMCIA driver, but
   * I've cleaned it a bit and add documentation.
   * Thanks to Loeke Brederveld from Lucent for the info.
   */

  /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable)
   * (does it work for everybody ? - especially old cards...) */
  /* Note : WFREQSEL verify that it is able to read from EEprom
   * a sensible frequency (address 0x00) + that MMR_FEE_STATUS_ID
   * is 0xA (Xilinx version) or 0xB (Ariadne version).
   * My test is more crude but do work... */
  if(!(mmc_in(base, mmroff(0, mmr_fee_status)) &
       (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY)))
    {
      /* We must download the frequency parameters to the
       * synthetisers (from the EEprom - area 1)
       * Note : as the EEprom is auto decremented, we set the end
       * if the area... */
      m.mmw_fee_addr = 0x0F;
      m.mmw_fee_ctrl = MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD;
      mmc_write(base, (char *)&m.mmw_fee_ctrl - (char *)&m,
                (unsigned char *)&m.mmw_fee_ctrl, 2);

      /* Wait until the download is finished */
      fee_wait(base, 100, 100);

#ifdef DEBUG_CONFIG_INFO
      /* The frequency was in the last word downloaded... */
      mmc_read(base, (char *)&m.mmw_fee_data_l - (char *)&m,
               (unsigned char *)&m.mmw_fee_data_l, 2);

      /* Print some info for the user */
      printk(KERN_DEBUG "%s: Wavelan 2.00 recognised (frequency select) : Current frequency = %ld\n",
             dev->name,
             ((m.mmw_fee_data_h << 4) |
              (m.mmw_fee_data_l >> 4)) * 5 / 2 + 24000L);
#endif

      /* We must now download the power adjust value (gain) to
       * the synthetisers (from the EEprom - area 7 - DAC) */
      m.mmw_fee_addr = 0x61;
      m.mmw_fee_ctrl = MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD;
      mmc_write(base, (char *)&m.mmw_fee_ctrl - (char *)&m,
                (unsigned char *)&m.mmw_fee_ctrl, 2);

      /* Wait until the download is finished */
    }   /* if 2.00 card */

#ifdef DEBUG_CONFIG_TRACE
  printk(KERN_DEBUG "%s: <-wv_mmc_init()\n", dev->name);
#endif
  return TRUE;
}

/*------------------------------------------------------------------*/
/*
 * Routine to gracefully turn off reception, and wait for any commands
 * to complete.
 * (called in wv_ru_start() and wavelan_close() and wavelan_event())
 */
static int
wv_ru_stop(struct net_device *  dev)
{
  unsigned int  base = dev->base_addr;
  net_local *   lp = netdev_priv(dev);
  unsigned long flags;
  int           status;
  int           spin;

#ifdef DEBUG_CONFIG_TRACE
  printk(KERN_DEBUG "%s: ->wv_ru_stop()\n", dev->name);
#endif

  spin_lock_irqsave(&lp->spinlock, flags);

  /* First, send the LAN controller a stop receive command */
  wv_82593_cmd(dev, "wv_graceful_shutdown(): stop-rcv",
               OP0_STOP_RCV, SR0_NO_RESULT);

  /* Then, spin until the receive unit goes idle */
  spin = 300;
  do
    {
      udelay(10);
      outb(OP0_NOP | CR0_STATUS_3, LCCR(base));
      status = inb(LCSR(base));
    }
  while(((status & SR3_RCV_STATE_MASK) != SR3_RCV_IDLE) && (spin-- > 0));

  /* Now, spin until the chip finishes executing its current command */
  do
    {
      udelay(10);
      outb(OP0_NOP | CR0_STATUS_3, LCCR(base));
      status = inb(LCSR(base));
    }
  while(((status & SR3_EXEC_STATE_MASK) != SR3_EXEC_IDLE) && (spin-- > 0));

  spin_unlock_irqrestore(&lp->spinlock, flags);

  /* If there was a problem */
  if(spin <= 0)
    {
#ifdef DEBUG_CONFIG_ERRORS
      printk(KERN_INFO "%s: wv_ru_stop(): The chip doesn't want to stop...\n",
             dev->name);
#endif
      return FALSE;
    }

#ifdef DEBUG_CONFIG_TRACE
  printk(KERN_DEBUG "%s: <-wv_ru_stop()\n", dev->name);
#endif
  return TRUE;
} /* wv_ru_stop */

/*------------------------------------------------------------------*/
/*
 * This routine starts the receive unit running.  First, it checks if
 * the card is actually ready. Then the card is instructed to receive
 * packets again.
 * (called in wv_hw_reset() & wavelan_open())
 */
static int
wv_ru_start(struct net_device * dev)
{
  unsigned int  base = dev->base_addr;
  net_local *   lp = netdev_priv(dev);
  unsigned long flags;

#ifdef DEBUG_CONFIG_TRACE
  printk(KERN_DEBUG "%s: ->wv_ru_start()\n", dev->name);
#endif

  /*
   * We need to start from a quiescent state. To do so, we could check
   * if the card is already running, but instead we just try to shut
   * it down. First, we disable reception (in case it was already enabled).
   */
  if(!wv_ru_stop(dev))
    return FALSE;

  spin_lock_irqsave(&lp->spinlock, flags);

  /* Now we know that no command is being executed. */

  /* Set the receive frame pointer and stop pointer */
  lp->rfp = 0;
  outb(OP0_SWIT_TO_PORT_1 | CR0_CHNL, LCCR(base));

  /* Reset ring management.  This sets the receive frame pointer to 1 */
  outb(OP1_RESET_RING_MNGMT, LCCR(base));

#if 0
  /* XXX the i82593 manual page 6-4 seems to indicate that the stop register
     should be set as below */
  /* outb(CR1_STOP_REG_UPDATE|((RX_SIZE - 0x40)>> RX_SIZE_SHIFT),LCCR(base));*/
#elif 0
  /* but I set it 0 instead */
  lp->stop = 0;
#else
  /* but I set it to 3 bytes per packet less than 8K */
  lp->stop = (0 + RX_SIZE - ((RX_SIZE / 64) * 3)) % RX_SIZE;
#endif
  outb(CR1_STOP_REG_UPDATE | (lp->stop >> RX_SIZE_SHIFT), LCCR(base));
  outb(OP1_INT_ENABLE, LCCR(base));
  outb(OP1_SWIT_TO_PORT_0, LCCR(base));

  /* Reset receive DMA pointer */
  hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET);
  hacr_write_slow(base, HACR_DEFAULT);

  /* Receive DMA on channel 1 */
  wv_82593_cmd(dev, "wv_ru_start(): rcv-enable",
               CR0_CHNL | OP0_RCV_ENABLE, SR0_NO_RESULT);

#ifdef DEBUG_I82593_SHOW
  {
    int status;
    int opri;
    int spin = 10000;

    /* spin until the chip starts receiving */
    do
      {
        outb(OP0_NOP | CR0_STATUS_3, LCCR(base));
        status = inb(LCSR(base));
        if(spin-- <= 0)
          break;
      }
    while(((status & SR3_RCV_STATE_MASK) != SR3_RCV_ACTIVE) &&
          ((status & SR3_RCV_STATE_MASK) != SR3_RCV_READY));
    printk(KERN_DEBUG "rcv status is 0x%x [i:%d]\n",
           (status & SR3_RCV_STATE_MASK), i);
  }
#endif

  spin_unlock_irqrestore(&lp->spinlock, flags);

#ifdef DEBUG_CONFIG_TRACE
  printk(KERN_DEBUG "%s: <-wv_ru_start()\n", dev->name);
#endif
  return TRUE;
}

/*------------------------------------------------------------------*/
/*
 * This routine does a standard config of the WaveLAN controller (i82593).
 * In the ISA driver, this is integrated in wavelan_hardware_reset()
 * (called by wv_hw_config(), wv_82593_reconfig() & wavelan_packet_xmit())
 */
static int
wv_82593_config(struct net_device *     dev)
{
  unsigned int                  base = dev->base_addr;
  net_local *                   lp = netdev_priv(dev);
  struct i82593_conf_block      cfblk;
  int                           ret = TRUE;

#ifdef DEBUG_CONFIG_TRACE
  printk(KERN_DEBUG "%s: ->wv_82593_config()\n", dev->name);
#endif

  /* Create & fill i82593 config block
   *
   * Now conform to Wavelan document WCIN085B
   */
  memset(&cfblk, 0x00, sizeof(struct i82593_conf_block));
  cfblk.d6mod = FALSE;          /* Run in i82593 advanced mode */
  cfblk.fifo_limit = 5;         /* = 56 B rx and 40 B tx fifo thresholds */
  cfblk.forgnesi = FALSE;       /* 0=82C501, 1=AMD7992B compatibility */
  cfblk.fifo_32 = 1;
  cfblk.throttle_enb = FALSE;
  cfblk.contin = TRUE;          /* enable continuous mode */
  cfblk.cntrxint = FALSE;       /* enable continuous mode receive interrupts */
  cfblk.addr_len = WAVELAN_ADDR_SIZE;
  cfblk.acloc = TRUE;           /* Disable source addr insertion by i82593 */
  cfblk.preamb_len = 0;         /* 2 bytes preamble (SFD) */
  cfblk.loopback = FALSE;
  cfblk.lin_prio = 0;           /* conform to 802.3 backoff algorithm */
  cfblk.exp_prio = 5;           /* conform to 802.3 backoff algorithm */
  cfblk.bof_met = 1;            /* conform to 802.3 backoff algorithm */
  cfblk.ifrm_spc = 0x20 >> 4;   /* 32 bit times interframe spacing */
  cfblk.slottim_low = 0x20 >> 5;        /* 32 bit times slot time */
  cfblk.slottim_hi = 0x0;
  cfblk.max_retr = 15;
  cfblk.prmisc = ((lp->promiscuous) ? TRUE: FALSE);     /* Promiscuous mode */
  cfblk.bc_dis = FALSE;         /* Enable broadcast reception */
  cfblk.crs_1 = TRUE;           /* Transmit without carrier sense */
  cfblk.nocrc_ins = FALSE;      /* i82593 generates CRC */      
  cfblk.crc_1632 = FALSE;       /* 32-bit Autodin-II CRC */
  cfblk.crs_cdt = FALSE;        /* CD not to be interpreted as CS */
  cfblk.cs_filter = 0;          /* CS is recognized immediately */
  cfblk.crs_src = FALSE;        /* External carrier sense */
  cfblk.cd_filter = 0;          /* CD is recognized immediately */
  cfblk.min_fr_len = ETH_ZLEN >> 2;     /* Minimum frame length 64 bytes */
  cfblk.lng_typ = FALSE;        /* Length field > 1500 = type field */
  cfblk.lng_fld = TRUE;         /* Disable 802.3 length field check */
  cfblk.rxcrc_xf = TRUE;        /* Don't transfer CRC to memory */
  cfblk.artx = TRUE;            /* Disable automatic retransmission */
  cfblk.sarec = TRUE;           /* Disable source addr trig of CD */
  cfblk.tx_jabber = TRUE;       /* Disable jabber jam sequence */
  cfblk.hash_1 = FALSE;         /* Use bits 0-5 in mc address hash */
  cfblk.lbpkpol = TRUE;         /* Loopback pin active high */
  cfblk.fdx = FALSE;            /* Disable full duplex operation */
  cfblk.dummy_6 = 0x3f;         /* all ones */
  cfblk.mult_ia = FALSE;        /* No multiple individual addresses */
  cfblk.dis_bof = FALSE;        /* Disable the backoff algorithm ?! */
  cfblk.dummy_1 = TRUE;         /* set to 1 */
  cfblk.tx_ifs_retrig = 3;      /* Hmm... Disabled */
#ifdef MULTICAST_ALL
  cfblk.mc_all = (lp->allmulticast ? TRUE: FALSE);      /* Allow all multicasts */
#else
  cfblk.mc_all = FALSE;         /* No multicast all mode */
#endif
  cfblk.rcv_mon = 0;            /* Monitor mode disabled */
  cfblk.frag_acpt = TRUE;       /* Do not accept fragments */
  cfblk.tstrttrs = FALSE;       /* No start transmission threshold */
  cfblk.fretx = TRUE;           /* FIFO automatic retransmission */
  cfblk.syncrqs = FALSE;        /* Synchronous DRQ deassertion... */
  cfblk.sttlen = TRUE;          /* 6 byte status registers */
  cfblk.rx_eop = TRUE;          /* Signal EOP on packet reception */
  cfblk.tx_eop = TRUE;          /* Signal EOP on packet transmission */
  cfblk.rbuf_size = RX_SIZE>>11;        /* Set receive buffer size */
  cfblk.rcvstop = TRUE;         /* Enable Receive Stop Register */

#ifdef DEBUG_I82593_SHOW
  {
    u_char *c = (u_char *) &cfblk;
    int i;
    printk(KERN_DEBUG "wavelan_cs: config block:");
    for(i = 0; i < sizeof(struct i82593_conf_block); i++,c++)
      {
        if((i % 16) == 0) printk("\n" KERN_DEBUG);
        printk("%02x ", *c);
      }
    printk("\n");
  }
#endif

  /* Copy the config block to the i82593 */
  outb(TX_BASE & 0xff, PIORL(base));
  outb(((TX_BASE >> 8) & PIORH_MASK) | PIORH_SEL_TX, PIORH(base));
  outb(sizeof(struct i82593_conf_block) & 0xff, PIOP(base));    /* lsb */
  outb(sizeof(struct i82593_conf_block) >> 8, PIOP(base));      /* msb */
  outsb(PIOP(base), (char *) &cfblk, sizeof(struct i82593_conf_block));

  /* reset transmit DMA pointer */
  hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET);
  hacr_write(base, HACR_DEFAULT);
  if(!wv_82593_cmd(dev, "wv_82593_config(): configure",
                   OP0_CONFIGURE, SR0_CONFIGURE_DONE))
    ret = FALSE;

  /* Initialize adapter's ethernet MAC address */
  outb(TX_BASE & 0xff, PIORL(base));
  outb(((TX_BASE >> 8) & PIORH_MASK) | PIORH_SEL_TX, PIORH(base));
  outb(WAVELAN_ADDR_SIZE, PIOP(base));  /* byte count lsb */
  outb(0, PIOP(base));                  /* byte count msb */
  outsb(PIOP(base), &dev->dev_addr[0], WAVELAN_ADDR_SIZE);

  /* reset transmit DMA pointer */
  hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET);
  hacr_write(base, HACR_DEFAULT);
  if(!wv_82593_cmd(dev, "wv_82593_config(): ia-setup",
                   OP0_IA_SETUP, SR0_IA_SETUP_DONE))
    ret = FALSE;

#ifdef WAVELAN_ROAMING
    /* If roaming is enabled, join the "Beacon Request" multicast group... */
    /* But only if it's not in there already! */
  if(do_roaming)
    dev_mc_add(dev,WAVELAN_BEACON_ADDRESS, WAVELAN_ADDR_SIZE, 1);
#endif  /* WAVELAN_ROAMING */

  /* If any multicast address to set */
  if(lp->mc_count)
    {
      struct dev_mc_list *      dmi;
      int                       addrs_len = WAVELAN_ADDR_SIZE * lp->mc_count;

#ifdef DEBUG_CONFIG_INFO
      DECLARE_MAC_BUF(mac);
      printk(KERN_DEBUG "%s: wv_hw_config(): set %d multicast addresses:\n",
             dev->name, lp->mc_count);
      for(dmi=dev->mc_list; dmi; dmi=dmi->next)
        printk(KERN_DEBUG " %s\n",
               print_mac(mac, dmi->dmi_addr));
#endif

      /* Initialize adapter's ethernet multicast addresses */
      outb(TX_BASE & 0xff, PIORL(base));
      outb(((TX_BASE >> 8) & PIORH_MASK) | PIORH_SEL_TX, PIORH(base));
      outb(addrs_len & 0xff, PIOP(base));       /* byte count lsb */
      outb((addrs_len >> 8), PIOP(base));       /* byte count msb */
      for(dmi=dev->mc_list; dmi; dmi=dmi->next)
        outsb(PIOP(base), dmi->dmi_addr, dmi->dmi_addrlen);

      /* reset transmit DMA pointer */
      hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET);
      hacr_write(base, HACR_DEFAULT);
      if(!wv_82593_cmd(dev, "wv_82593_config(): mc-setup",
                       OP0_MC_SETUP, SR0_MC_SETUP_DONE))
        ret = FALSE;
      lp->mc_count = dev->mc_count;     /* remember to avoid repeated reset */
    }

  /* Job done, clear the flag */
  lp->reconfig_82593 = FALSE;

#ifdef DEBUG_CONFIG_TRACE
  printk(KERN_DEBUG "%s: <-wv_82593_config()\n", dev->name);
#endif
  return(ret);
}

/*------------------------------------------------------------------*/
/*
 * Read the Access Configuration Register, perform a software reset,
 * and then re-enable the card's software.
 *
 * If I understand correctly : reset the pcmcia interface of the
 * wavelan.
 * (called by wv_config())
 */
static int
wv_pcmcia_reset(struct net_device *     dev)
{
  int           i;
  conf_reg_t    reg = { 0, CS_READ, CISREG_COR, 0 };
  struct pcmcia_device *        link = ((net_local *)netdev_priv(dev))->link;

#ifdef DEBUG_CONFIG_TRACE
  printk(KERN_DEBUG "%s: ->wv_pcmcia_reset()\n", dev->name);
#endif

  i = pcmcia_access_configuration_register(link, &reg);
  if(i != CS_SUCCESS)
    {
      cs_error(link, AccessConfigurationRegister, i);
      return FALSE;
    }
      
#ifdef DEBUG_CONFIG_INFO
  printk(KERN_DEBUG "%s: wavelan_pcmcia_reset(): Config reg is 0x%x\n",
         dev->name, (u_int) reg.Value);
#endif

  reg.Action = CS_WRITE;
  reg.Value = reg.Value | COR_SW_RESET;
  i = pcmcia_access_configuration_register(link, &reg);
  if(i != CS_SUCCESS)
    {
      cs_error(link, AccessConfigurationRegister, i);
      return FALSE;
    }
      
  reg.Action = CS_WRITE;
  reg.Value = COR_LEVEL_IRQ | COR_CONFIG;
  i = pcmcia_access_configuration_register(link, &reg);
  if(i != CS_SUCCESS)
    {
      cs_error(link, AccessConfigurationRegister, i);
      return FALSE;
    }

#ifdef DEBUG_CONFIG_TRACE
  printk(KERN_DEBUG "%s: <-wv_pcmcia_reset()\n", dev->name);
#endif
  return TRUE;
}

/*------------------------------------------------------------------*/
/*
 * wavelan_hw_config() is called after a CARD_INSERTION event is
 * received, to configure the wavelan hardware.
 * Note that the reception will be enabled in wavelan->open(), so the
 * device is configured but idle...
 * Performs the following actions:
 *      1. A pcmcia software reset (using wv_pcmcia_reset())
 *      2. A power reset (reset DMA)
 *      3. Reset the LAN controller
 *      4. Initialize the radio modem (using wv_mmc_init)
 *      5. Configure LAN controller (using wv_82593_config)
 *      6. Perform a diagnostic on the LAN controller
 * (called by wavelan_event() & wv_hw_reset())
 */
static int
wv_hw_config(struct net_device *        dev)
{
  net_local *           lp = netdev_priv(dev);
  unsigned int          base = dev->base_addr;
  unsigned long         flags;
  int                   ret = FALSE;

#ifdef DEBUG_CONFIG_TRACE
  printk(KERN_DEBUG "%s: ->wv_hw_config()\n", dev->name);
#endif

  /* compile-time check the sizes of structures */
  BUILD_BUG_ON(sizeof(psa_t) != PSA_SIZE);
  BUILD_BUG_ON(sizeof(mmw_t) != MMW_SIZE);
  BUILD_BUG_ON(sizeof(mmr_t) != MMR_SIZE);

  /* Reset the pcmcia interface */
  if(wv_pcmcia_reset(dev) == FALSE)
    return FALSE;

  /* Disable interrupts */
  spin_lock_irqsave(&lp->spinlock, flags);

  /* Disguised goto ;-) */
  do
    {
      /* Power UP the module + reset the modem + reset host adapter
       * (in fact, reset DMA channels) */
      hacr_write_slow(base, HACR_RESET);
      hacr_write(base, HACR_DEFAULT);

      /* Check if the module has been powered up... */
      if(hasr_read(base) & HASR_NO_CLK)
        {
#ifdef DEBUG_CONFIG_ERRORS
          printk(KERN_WARNING "%s: wv_hw_config(): modem not connected or not a wavelan card\n",
                 dev->name);
#endif
          break;
        }

      /* initialize the modem */
      if(wv_mmc_init(dev) == FALSE)
        {
#ifdef DEBUG_CONFIG_ERRORS
          printk(KERN_WARNING "%s: wv_hw_config(): Can't configure the modem\n",
                 dev->name);
#endif
          break;
        }

      /* reset the LAN controller (i82593) */
      outb(OP0_RESET, LCCR(base));
      mdelay(1);        /* A bit crude ! */

      /* Initialize the LAN controller */
      if(wv_82593_config(dev) == FALSE)
        {
#ifdef DEBUG_CONFIG_ERRORS
          printk(KERN_INFO "%s: wv_hw_config(): i82593 init failed\n",
                 dev->name);
#endif
          break;
        }

      /* Diagnostic */
      if(wv_diag(dev) == FALSE)
        {
#ifdef DEBUG_CONFIG_ERRORS
          printk(KERN_INFO "%s: wv_hw_config(): i82593 diagnostic failed\n",
                 dev->name);
#endif
          break;
        }

      /* 
       * insert code for loopback test here
       */

      /* The device is now configured */
      lp->configured = 1;
      ret = TRUE;
    }
  while(0);

  /* Re-enable interrupts */
  spin_unlock_irqrestore(&lp->spinlock, flags);

#ifdef DEBUG_CONFIG_TRACE
  printk(KERN_DEBUG "%s: <-wv_hw_config()\n", dev->name);
#endif
  return(ret);
}

/*------------------------------------------------------------------*/
/*
 * Totally reset the wavelan and restart it.
 * Performs the following actions:
 *      1. Call wv_hw_config()
 *      2. Start the LAN controller's receive unit
 * (called by wavelan_event(), wavelan_watchdog() and wavelan_open())
 */
static void
wv_hw_reset(struct net_device * dev)
{
  net_local *   lp = netdev_priv(dev);

#ifdef DEBUG_CONFIG_TRACE
  printk(KERN_DEBUG "%s: ->wv_hw_reset()\n", dev->name);
#endif

  lp->nresets++;
  lp->configured = 0;
  
  /* Call wv_hw_config() for most of the reset & init stuff */
  if(wv_hw_config(dev) == FALSE)
    return;

  /* start receive unit */
  wv_ru_start(dev);

#ifdef DEBUG_CONFIG_TRACE
  printk(KERN_DEBUG "%s: <-wv_hw_reset()\n", dev->name);
#endif
}

/*------------------------------------------------------------------*/
/*
 * wv_pcmcia_config() is called after a CARD_INSERTION event is
 * received, to configure the PCMCIA socket, and to make the ethernet
 * device available to the system.
 * (called by wavelan_event())
 */
static int
wv_pcmcia_config(struct pcmcia_device * link)
{
  struct net_device *   dev = (struct net_device *) link->priv;
  int                   i;
  win_req_t             req;
  memreq_t              mem;
  net_local *           lp = netdev_priv(dev);


#ifdef DEBUG_CONFIG_TRACE
  printk(KERN_DEBUG "->wv_pcmcia_config(0x%p)\n", link);
#endif

  do
    {
      i = pcmcia_request_io(link, &link->io);
      if(i != CS_SUCCESS)
        {
          cs_error(link, RequestIO, i);
          break;
        }

      /*
       * Now allocate an interrupt line.  Note that this does not
       * actually assign a handler to the interrupt.
       */
      i = pcmcia_request_irq(link, &link->irq);
      if(i != CS_SUCCESS)
        {
          cs_error(link, RequestIRQ, i);
          break;
        }

      /*
       * This actually configures the PCMCIA socket -- setting up
       * the I/O windows and the interrupt mapping.
       */
      link->conf.ConfigIndex = 1;
      i = pcmcia_request_configuration(link, &link->conf);
      if(i != CS_SUCCESS)
        {
          cs_error(link, RequestConfiguration, i);
          break;
        }

      /*
       * Allocate a small memory window.  Note that the struct pcmcia_device
       * structure provides space for one window handle -- if your
       * device needs several windows, you'll need to keep track of
       * the handles in your private data structure, link->priv.
       */
      req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
      req.Base = req.Size = 0;
      req.AccessSpeed = mem_speed;
      i = pcmcia_request_window(&link, &req, &link->win);
      if(i != CS_SUCCESS)
        {
          cs_error(link, RequestWindow, i);
          break;
        }

      lp->mem = ioremap(req.Base, req.Size);
      dev->mem_start = (u_long)lp->mem;
      dev->mem_end = dev->mem_start + req.Size;

      mem.CardOffset = 0; mem.Page = 0;
      i = pcmcia_map_mem_page(link->win, &mem);
      if(i != CS_SUCCESS)
        {
          cs_error(link, MapMemPage, i);
          break;
        }

      /* Feed device with this info... */
      dev->irq = link->irq.AssignedIRQ;
      dev->base_addr = link->io.BasePort1;
      netif_start_queue(dev);

#ifdef DEBUG_CONFIG_INFO
      printk(KERN_DEBUG "wv_pcmcia_config: MEMSTART %p IRQ %d IOPORT 0x%x\n",
             lp->mem, dev->irq, (u_int) dev->base_addr);
#endif

      SET_NETDEV_DEV(dev, &handle_to_dev(link));
      i = register_netdev(dev);
      if(i != 0)
        {
#ifdef DEBUG_CONFIG_ERRORS
          printk(KERN_INFO "wv_pcmcia_config(): register_netdev() failed\n");
#endif
          break;
        }
    }
  while(0);             /* Humm... Disguised goto !!! */

  /* If any step failed, release any partially configured state */
  if(i != 0)
    {
      wv_pcmcia_release(link);
      return FALSE;
    }

  strcpy(((net_local *) netdev_priv(dev))->node.dev_name, dev->name);
  link->dev_node = &((net_local *) netdev_priv(dev))->node;

#ifdef DEBUG_CONFIG_TRACE
  printk(KERN_DEBUG "<-wv_pcmcia_config()\n");
#endif
  return TRUE;
}

/*------------------------------------------------------------------*/
/*
 * After a card is removed, wv_pcmcia_release() will unregister the net
 * device, and release the PCMCIA configuration.  If the device is
 * still open, this will be postponed until it is closed.
 */
static void
wv_pcmcia_release(struct pcmcia_device *link)
{
        struct net_device *     dev = (struct net_device *) link->priv;
        net_local *             lp = netdev_priv(dev);

#ifdef DEBUG_CONFIG_TRACE
        printk(KERN_DEBUG "%s: -> wv_pcmcia_release(0x%p)\n", dev->name, link);
#endif

        iounmap(lp->mem);
        pcmcia_disable_device(link);

#ifdef DEBUG_CONFIG_TRACE
        printk(KERN_DEBUG "%s: <- wv_pcmcia_release()\n", dev->name);
#endif
}

/************************ INTERRUPT HANDLING ************************/

/*
 * This function is the interrupt handler for the WaveLAN card. This
 * routine will be called whenever: 
 *      1. A packet is received.
 *      2. A packet has successfully been transferred and the unit is
 *         ready to transmit another packet.
 *      3. A command has completed execution.
 */
static irqreturn_t
wavelan_interrupt(int           irq,
                  void *        dev_id)
{
  struct net_device *   dev = dev_id;
  net_local *   lp;
  unsigned int  base;
  int           status0;
  u_int         tx_status;

#ifdef DEBUG_INTERRUPT_TRACE
  printk(KERN_DEBUG "%s: ->wavelan_interrupt()\n", dev->name);
#endif

  lp = netdev_priv(dev);
  base = dev->base_addr;

#ifdef DEBUG_INTERRUPT_INFO
  /* Check state of our spinlock (it should be cleared) */
  if(spin_is_locked(&lp->spinlock))
    printk(KERN_DEBUG
           "%s: wavelan_interrupt(): spinlock is already locked !!!\n",
           dev->name);
#endif

  /* Prevent reentrancy. We need to do that because we may have
   * multiple interrupt handler running concurently.
   * It is safe because interrupts are disabled before aquiring
   * the spinlock. */
  spin_lock(&lp->spinlock);

  /* Treat all pending interrupts */
  while(1)
    {
      /* ---------------- INTERRUPT CHECKING ---------------- */
      /*
       * Look for the interrupt and verify the validity
       */
      outb(CR0_STATUS_0 | OP0_NOP, LCCR(base));
      status0 = inb(LCSR(base));

#ifdef DEBUG_INTERRUPT_INFO
      printk(KERN_DEBUG "status0 0x%x [%s => 0x%x]", status0, 
             (status0&SR0_INTERRUPT)?"int":"no int",status0&~SR0_INTERRUPT);
      if(status0&SR0_INTERRUPT)
        {
          printk(" [%s => %d]\n", (status0 & SR0_CHNL) ? "chnl" :
                 ((status0 & SR0_EXECUTION) ? "cmd" :
                  ((status0 & SR0_RECEPTION) ? "recv" : "unknown")),
                 (status0 & SR0_EVENT_MASK));
        }
      else
        printk("\n");
#endif

      /* Return if no actual interrupt from i82593 (normal exit) */
      if(!(status0 & SR0_INTERRUPT))
        break;

      /* If interrupt is both Rx and Tx or none...
       * This code in fact is there to catch the spurious interrupt
       * when you remove the wavelan pcmcia card from the socket */
      if(((status0 & SR0_BOTH_RX_TX) == SR0_BOTH_RX_TX) ||
         ((status0 & SR0_BOTH_RX_TX) == 0x0))
        {
#ifdef DEBUG_INTERRUPT_INFO
          printk(KERN_INFO "%s: wv_interrupt(): bogus interrupt (or from dead card) : %X\n",
                 dev->name, status0);
#endif
          /* Acknowledge the interrupt */
          outb(CR0_INT_ACK | OP0_NOP, LCCR(base));
          break;
        }

      /* ----------------- RECEIVING PACKET ----------------- */
      /*
       * When the wavelan signal the reception of a new packet,
       * we call wv_packet_rcv() to copy if from the buffer and
       * send it to NET3
       */
      if(status0 & SR0_RECEPTION)
        {
#ifdef DEBUG_INTERRUPT_INFO
          printk(KERN_DEBUG "%s: wv_interrupt(): receive\n", dev->name);
#endif

          if((status0 & SR0_EVENT_MASK) == SR0_STOP_REG_HIT)
            {
#ifdef DEBUG_INTERRUPT_ERROR
              printk(KERN_INFO "%s: wv_interrupt(): receive buffer overflow\n",
                     dev->name);
#endif
              lp->stats.rx_over_errors++;
              lp->overrunning = 1;
            }

          /* Get the packet */
          wv_packet_rcv(dev);
          lp->overrunning = 0;

          /* Acknowledge the interrupt */
          outb(CR0_INT_ACK | OP0_NOP, LCCR(base));
          continue;
        }

      /* ---------------- COMMAND COMPLETION ---------------- */
      /*
       * Interrupts issued when the i82593 has completed a command.
       * Most likely : transmission done
       */

      /* If a transmission has been done */
      if((status0 & SR0_EVENT_MASK) == SR0_TRANSMIT_DONE ||
         (status0 & SR0_EVENT_MASK) == SR0_RETRANSMIT_DONE ||
         (status0 & SR0_EVENT_MASK) == SR0_TRANSMIT_NO_CRC_DONE)
        {
#ifdef DEBUG_TX_ERROR
          if((status0 & SR0_EVENT_MASK) == SR0_TRANSMIT_NO_CRC_DONE)
            printk(KERN_INFO "%s: wv_interrupt(): packet transmitted without CRC.\n",
                   dev->name);
#endif

          /* Get transmission status */
          tx_status = inb(LCSR(base));
          tx_status |= (inb(LCSR(base)) << 8);
#ifdef DEBUG_INTERRUPT_INFO
          printk(KERN_DEBUG "%s: wv_interrupt(): transmission done\n",
                 dev->name);
          {
            u_int       rcv_bytes;
            u_char      status3;
            rcv_bytes = inb(LCSR(base));
            rcv_bytes |= (inb(LCSR(base)) << 8);
            status3 = inb(LCSR(base));
            printk(KERN_DEBUG "tx_status 0x%02x rcv_bytes 0x%02x status3 0x%x\n",
                   tx_status, rcv_bytes, (u_int) status3);
          }
#endif
          /* Check for possible errors */
          if((tx_status & TX_OK) != TX_OK)
            {
              lp->stats.tx_errors++;

              if(tx_status & TX_FRTL)
                {
#ifdef DEBUG_TX_ERROR
                  printk(KERN_INFO "%s: wv_interrupt(): frame too long\n",
                         dev->name);
#endif
                }
              if(tx_status & TX_UND_RUN)
                {
#ifdef DEBUG_TX_FAIL
                  printk(KERN_DEBUG "%s: wv_interrupt(): DMA underrun\n",
                         dev->name);
#endif
                  lp->stats.tx_aborted_errors++;
                }
              if(tx_status & TX_LOST_CTS)
                {
#ifdef DEBUG_TX_FAIL
                  printk(KERN_DEBUG "%s: wv_interrupt(): no CTS\n", dev->name);
#endif
                  lp->stats.tx_carrier_errors++;
                }
              if(tx_status & TX_LOST_CRS)
                {
#ifdef DEBUG_TX_FAIL
                  printk(KERN_DEBUG "%s: wv_interrupt(): no carrier\n",
                         dev->name);
#endif
                  lp->stats.tx_carrier_errors++;
                }
              if(tx_status & TX_HRT_BEAT)
                {
#ifdef DEBUG_TX_FAIL
                  printk(KERN_DEBUG "%s: wv_interrupt(): heart beat\n", dev->name);
#endif
                  lp->stats.tx_heartbeat_errors++;
                }
              if(tx_status & TX_DEFER)
                {
#ifdef DEBUG_TX_FAIL
                  printk(KERN_DEBUG "%s: wv_interrupt(): channel jammed\n",
                         dev->name);
#endif
                }
              /* Ignore late collisions since they're more likely to happen
               * here (the WaveLAN design prevents the LAN controller from
               * receiving while it is transmitting). We take action only when
               * the maximum retransmit attempts is exceeded.
               */
              if(tx_status & TX_COLL)
                {
                  if(tx_status & TX_MAX_COL)
                    {
#ifdef DEBUG_TX_FAIL
                      printk(KERN_DEBUG "%s: wv_interrupt(): channel congestion\n",
                             dev->name);
#endif
                      if(!(tx_status & TX_NCOL_MASK))
                        {
                          lp->stats.collisions += 0x10;
                        }
                    }
                }
            }   /* if(!(tx_status & TX_OK)) */

          lp->stats.collisions += (tx_status & TX_NCOL_MASK);
          lp->stats.tx_packets++;

          netif_wake_queue(dev);
          outb(CR0_INT_ACK | OP0_NOP, LCCR(base));      /* Acknowledge the interrupt */
        } 
      else      /* if interrupt = transmit done or retransmit done */
        {
#ifdef DEBUG_INTERRUPT_ERROR
          printk(KERN_INFO "wavelan_cs: unknown interrupt, status0 = %02x\n",
                 status0);
#endif
          outb(CR0_INT_ACK | OP0_NOP, LCCR(base));      /* Acknowledge the interrupt */
        }
    }   /* while(1) */

  spin_unlock(&lp->spinlock);

#ifdef DEBUG_INTERRUPT_TRACE
  printk(KERN_DEBUG "%s: <-wavelan_interrupt()\n", dev->name);
#endif

  /* We always return IRQ_HANDLED, because we will receive empty
   * interrupts under normal operations. Anyway, it doesn't matter
   * as we are dealing with an ISA interrupt that can't be shared.
   *
   * Explanation : under heavy receive, the following happens :
   * ->wavelan_interrupt()
   *    (status0 & SR0_INTERRUPT) != 0
   *       ->wv_packet_rcv()
   *    (status0 & SR0_INTERRUPT) != 0
   *       ->wv_packet_rcv()
   *    (status0 & SR0_INTERRUPT) == 0  // i.e. no more event
   * <-wavelan_interrupt()
   * ->wavelan_interrupt()
   *    (status0 & SR0_INTERRUPT) == 0  // i.e. empty interrupt
   * <-wavelan_interrupt()
   * Jean II */
  return IRQ_HANDLED;
} /* wv_interrupt */

/*------------------------------------------------------------------*/
/*
 * Watchdog: when we start a transmission, a timer is set for us in the
 * kernel.  If the transmission completes, this timer is disabled. If
 * the timer expires, we are called and we try to unlock the hardware.
 *
 * Note : This watchdog is move clever than the one in the ISA driver,
 * because it try to abort the current command before reseting
 * everything...
 * On the other hand, it's a bit simpler, because we don't have to
 * deal with the multiple Tx buffers...
 */
static void
wavelan_watchdog(struct net_device *    dev)
{
  net_local *           lp = netdev_priv(dev);
  unsigned int          base = dev->base_addr;
  unsigned long         flags;
  int                   aborted = FALSE;

#ifdef DEBUG_INTERRUPT_TRACE
  printk(KERN_DEBUG "%s: ->wavelan_watchdog()\n", dev->name);
#endif

#ifdef DEBUG_INTERRUPT_ERROR
  printk(KERN_INFO "%s: wavelan_watchdog: watchdog timer expired\n",
         dev->name);
#endif

  spin_lock_irqsave(&lp->spinlock, flags);

  /* Ask to abort the current command */
  outb(OP0_ABORT, LCCR(base));

  /* Wait for the end of the command (a bit hackish) */
  if(wv_82593_cmd(dev, "wavelan_watchdog(): abort",
                  OP0_NOP | CR0_STATUS_3, SR0_EXECUTION_ABORTED))
    aborted = TRUE;

  /* Release spinlock here so that wv_hw_reset() can grab it */
  spin_unlock_irqrestore(&lp->spinlock, flags);

  /* Check if we were successful in aborting it */
  if(!aborted)
    {
      /* It seem that it wasn't enough */
#ifdef DEBUG_INTERRUPT_ERROR
      printk(KERN_INFO "%s: wavelan_watchdog: abort failed, trying reset\n",
             dev->name);
#endif
      wv_hw_reset(dev);
    }

#ifdef DEBUG_PSA_SHOW
  {
    psa_t               psa;
    psa_read(dev, 0, (unsigned char *) &psa, sizeof(psa));
    wv_psa_show(&psa);
  }
#endif
#ifdef DEBUG_MMC_SHOW
  wv_mmc_show(dev);
#endif
#ifdef DEBUG_I82593_SHOW
  wv_ru_show(dev);
#endif

  /* We are no more waiting for something... */
  netif_wake_queue(dev);

#ifdef DEBUG_INTERRUPT_TRACE
  printk(KERN_DEBUG "%s: <-wavelan_watchdog()\n", dev->name);
#endif
}

/********************* CONFIGURATION CALLBACKS *********************/
/*
 * Here are the functions called by the pcmcia package (cardmgr) and
 * linux networking (NET3) for initialization, configuration and
 * deinstallations of the Wavelan Pcmcia Hardware.
 */

/*------------------------------------------------------------------*/
/*
 * Configure and start up the WaveLAN PCMCIA adaptor.
 * Called by NET3 when it "open" the device.
 */
static int
wavelan_open(struct net_device *        dev)
{
  net_local *   lp = netdev_priv(dev);
  struct pcmcia_device *        link = lp->link;
  unsigned int  base = dev->base_addr;

#ifdef DEBUG_CALLBACK_TRACE
  printk(KERN_DEBUG "%s: ->wavelan_open(dev=0x%x)\n", dev->name,
         (unsigned int) dev);
#endif

  /* Check if the modem is powered up (wavelan_close() power it down */
  if(hasr_read(base) & HASR_NO_CLK)
    {
      /* Power up (power up time is 250us) */
      hacr_write(base, HACR_DEFAULT);

      /* Check if the module has been powered up... */
      if(hasr_read(base) & HASR_NO_CLK)
        {
#ifdef DEBUG_CONFIG_ERRORS
          printk(KERN_WARNING "%s: wavelan_open(): modem not connected\n",
                 dev->name);
#endif
          return FALSE;
        }
    }

  /* Start reception and declare the driver ready */
  if(!lp->configured)
    return FALSE;
  if(!wv_ru_start(dev))
    wv_hw_reset(dev);           /* If problem : reset */
  netif_start_queue(dev);

  /* Mark the device as used */
  link->open++;

#ifdef WAVELAN_ROAMING
  if(do_roaming)
    wv_roam_init(dev);
#endif  /* WAVELAN_ROAMING */

#ifdef DEBUG_CALLBACK_TRACE
  printk(KERN_DEBUG "%s: <-wavelan_open()\n", dev->name);
#endif
  return 0;
}

/*------------------------------------------------------------------*/
/*
 * Shutdown the WaveLAN PCMCIA adaptor.
 * Called by NET3 when it "close" the device.
 */
static int
wavelan_close(struct net_device *       dev)
{
  struct pcmcia_device *        link = ((net_local *)netdev_priv(dev))->link;
  unsigned int  base = dev->base_addr;

#ifdef DEBUG_CALLBACK_TRACE
  printk(KERN_DEBUG "%s: ->wavelan_close(dev=0x%x)\n", dev->name,
         (unsigned int) dev);
#endif

  /* If the device isn't open, then nothing to do */
  if(!link->open)
    {
#ifdef DEBUG_CONFIG_INFO
      printk(KERN_DEBUG "%s: wavelan_close(): device not open\n", dev->name);
#endif
      return 0;
    }

#ifdef WAVELAN_ROAMING
  /* Cleanup of roaming stuff... */
  if(do_roaming)
    wv_roam_cleanup(dev);
#endif  /* WAVELAN_ROAMING */

  link->open--;

  /* If the card is still present */
  if(netif_running(dev))
    {
      netif_stop_queue(dev);

      /* Stop receiving new messages and wait end of transmission */
      wv_ru_stop(dev);

      /* Power down the module */
      hacr_write(base, HACR_DEFAULT & (~HACR_PWR_STAT));
    }

#ifdef DEBUG_CALLBACK_TRACE
  printk(KERN_DEBUG "%s: <-wavelan_close()\n", dev->name);
#endif
  return 0;
}

/*------------------------------------------------------------------*/
/*
 * wavelan_attach() creates an "instance" of the driver, allocating
 * local data structures for one device (one interface).  The device
 * is registered with Card Services.
 *
 * The dev_link structure is initialized, but we don't actually
 * configure the card at this point -- we wait until we receive a
 * card insertion event.
 */
static int
wavelan_probe(struct pcmcia_device *p_dev)
{
  struct net_device *   dev;            /* Interface generic data */
  net_local *   lp;             /* Interface specific data */
  int ret;

#ifdef DEBUG_CALLBACK_TRACE
  printk(KERN_DEBUG "-> wavelan_attach()\n");
#endif

  /* The io structure describes IO port mapping */
  p_dev->io.NumPorts1 = 8;
  p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
  p_dev->io.IOAddrLines = 3;

  /* Interrupt setup */
  p_dev->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
  p_dev->irq.IRQInfo1 = IRQ_LEVEL_ID;
  p_dev->irq.Handler = wavelan_interrupt;

  /* General socket configuration */
  p_dev->conf.Attributes = CONF_ENABLE_IRQ;
  p_dev->conf.IntType = INT_MEMORY_AND_IO;

  /* Allocate the generic data structure */
  dev = alloc_etherdev(sizeof(net_local));
  if (!dev)
      return -ENOMEM;

  p_dev->priv = p_dev->irq.Instance = dev;

  lp = netdev_priv(dev);

  /* Init specific data */
  lp->configured = 0;
  lp->reconfig_82593 = FALSE;
  lp->nresets = 0;
  /* Multicast stuff */
  lp->promiscuous = 0;
  lp->allmulticast = 0;
  lp->mc_count = 0;

  /* Init spinlock */
  spin_lock_init(&lp->spinlock);

  /* back links */
  lp->dev = dev;

  /* wavelan NET3 callbacks */
  dev->open = &wavelan_open;
  dev->stop = &wavelan_close;
  dev->hard_start_xmit = &wavelan_packet_xmit;
  dev->get_stats = &wavelan_get_stats;
  dev->set_multicast_list = &wavelan_set_multicast_list;
#ifdef SET_MAC_ADDRESS
  dev->set_mac_address = &wavelan_set_mac_address;
#endif  /* SET_MAC_ADDRESS */

  /* Set the watchdog timer */
  dev->tx_timeout       = &wavelan_watchdog;
  dev->watchdog_timeo   = WATCHDOG_JIFFIES;
  SET_ETHTOOL_OPS(dev, &ops);

  dev->wireless_handlers = &wavelan_handler_def;
  lp->wireless_data.spy_data = &lp->spy_data;
  dev->wireless_data = &lp->wireless_data;

  /* Other specific data */
  dev->mtu = WAVELAN_MTU;

  ret = wv_pcmcia_config(p_dev);
  if (ret)
          return ret;

  ret = wv_hw_config(dev);
  if (ret) {
          dev->irq = 0;
          pcmcia_disable_device(p_dev);
          return ret;
  }

  wv_init_info(dev);

#ifdef DEBUG_CALLBACK_TRACE
  printk(KERN_DEBUG "<- wavelan_attach()\n");
#endif

  return 0;
}

/*------------------------------------------------------------------*/
/*
 * This deletes a driver "instance".  The device is de-registered with
 * Card Services.  If it has been released, all local data structures
 * are freed.  Otherwise, the structures will be freed when the device
 * is released.
 */
static void
wavelan_detach(struct pcmcia_device *link)
{
#ifdef DEBUG_CALLBACK_TRACE
  printk(KERN_DEBUG "-> wavelan_detach(0x%p)\n", link);
#endif

  /* Some others haven't done their job : give them another chance */
  wv_pcmcia_release(link);

  /* Free pieces */
  if(link->priv)
    {
      struct net_device *       dev = (struct net_device *) link->priv;

      /* Remove ourselves from the kernel list of ethernet devices */
      /* Warning : can't be called from interrupt, timer or wavelan_close() */
      if (link->dev_node)
        unregister_netdev(dev);
      link->dev_node = NULL;
      ((net_local *)netdev_priv(dev))->link = NULL;
      ((net_local *)netdev_priv(dev))->dev = NULL;
      free_netdev(dev);
    }

#ifdef DEBUG_CALLBACK_TRACE
  printk(KERN_DEBUG "<- wavelan_detach()\n");
#endif
}

static int wavelan_suspend(struct pcmcia_device *link)
{
        struct net_device *     dev = (struct net_device *) link->priv;

        /* NB: wavelan_close will be called, but too late, so we are
         * obliged to close nicely the wavelan here. David, could you
         * close the device before suspending them ? And, by the way,
         * could you, on resume, add a "route add -net ..." after the
         * ifconfig up ? Thanks... */

        /* Stop receiving new messages and wait end of transmission */
        wv_ru_stop(dev);

        if (link->open)
                netif_device_detach(dev);

        /* Power down the module */
        hacr_write(dev->base_addr, HACR_DEFAULT & (~HACR_PWR_STAT));

        return 0;
}

static int wavelan_resume(struct pcmcia_device *link)
{
        struct net_device *     dev = (struct net_device *) link->priv;

        if (link->open) {
                wv_hw_reset(dev);
                netif_device_attach(dev);
        }

        return 0;
}


static struct pcmcia_device_id wavelan_ids[] = {
        PCMCIA_DEVICE_PROD_ID12("AT&T","WaveLAN/PCMCIA", 0xe7c5affd, 0x1bc50975),
        PCMCIA_DEVICE_PROD_ID12("Digital", "RoamAbout/DS", 0x9999ab35, 0x00d05e06),
        PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/PCMCIA", 0x23eb9949, 0x1bc50975),
        PCMCIA_DEVICE_PROD_ID12("NCR", "WaveLAN/PCMCIA", 0x24358cd4, 0x1bc50975),
        PCMCIA_DEVICE_NULL,
};
MODULE_DEVICE_TABLE(pcmcia, wavelan_ids);

static struct pcmcia_driver wavelan_driver = {
        .owner          = THIS_MODULE,
        .drv            = {
                .name   = "wavelan_cs",
        },
        .probe          = wavelan_probe,
        .remove         = wavelan_detach,
        .id_table       = wavelan_ids,
        .suspend        = wavelan_suspend,
        .resume         = wavelan_resume,
};

static int __init
init_wavelan_cs(void)
{
        return pcmcia_register_driver(&wavelan_driver);
}

static void __exit
exit_wavelan_cs(void)
{
        pcmcia_unregister_driver(&wavelan_driver);
}

module_init(init_wavelan_cs);
module_exit(exit_wavelan_cs);