Pull vector-domain into release branch

[linux-2.6/mini2440.git] / include / asm-sh / uaccess.h

/* $Id: uaccess.h,v 1.11 2003/10/13 07:21:20 lethal Exp $
 *
 * User space memory access functions
 *
 * Copyright (C) 1999, 2002  Niibe Yutaka
 * Copyright (C) 2003  Paul Mundt
 *
 *  Based on:
 *     MIPS implementation version 1.15 by
 *              Copyright (C) 1996, 1997, 1998 by Ralf Baechle
 *     and i386 version.
 */
#ifndef __ASM_SH_UACCESS_H
#define __ASM_SH_UACCESS_H

#include <linux/errno.h>
#include <linux/sched.h>

#define VERIFY_READ    0
#define VERIFY_WRITE   1

/*
 * The fs value determines whether argument validity checking should be
 * performed or not.  If get_fs() == USER_DS, checking is performed, with
 * get_fs() == KERNEL_DS, checking is bypassed.
 *
 * For historical reasons (Data Segment Register?), these macros are misnamed.
 */

#define MAKE_MM_SEG(s)  ((mm_segment_t) { (s) })

#define KERNEL_DS       MAKE_MM_SEG(0xFFFFFFFFUL)
#define USER_DS         MAKE_MM_SEG(PAGE_OFFSET)

#define segment_eq(a,b) ((a).seg == (b).seg)

#define get_ds()        (KERNEL_DS)

#if !defined(CONFIG_MMU)
/* NOMMU is always true */
#define __addr_ok(addr) (1)

static inline mm_segment_t get_fs(void)
{
        return USER_DS;
}

static inline void set_fs(mm_segment_t s)
{
}

/*
 * __access_ok: Check if address with size is OK or not.
 *
 * If we don't have an MMU (or if its disabled) the only thing we really have
 * to look out for is if the address resides somewhere outside of what
 * available RAM we have.
 *
 * TODO: This check could probably also stand to be restricted somewhat more..
 * though it still does the Right Thing(tm) for the time being.
 */
static inline int __access_ok(unsigned long addr, unsigned long size)
{
        return ((addr >= memory_start) && ((addr + size) < memory_end));
}
#else /* CONFIG_MMU */
#define __addr_ok(addr) \
        ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg))

#define get_fs()        (current_thread_info()->addr_limit)
#define set_fs(x)       (current_thread_info()->addr_limit = (x))

/*
 * __access_ok: Check if address with size is OK or not.
 *
 * We do three checks:
 * (1) is it user space?
 * (2) addr + size --> carry?
 * (3) addr + size >= 0x80000000  (PAGE_OFFSET)
 *
 * (1) (2) (3) | RESULT
 *  0   0   0  |  ok
 *  0   0   1  |  ok
 *  0   1   0  |  bad
 *  0   1   1  |  bad
 *  1   0   0  |  ok
 *  1   0   1  |  bad
 *  1   1   0  |  bad
 *  1   1   1  |  bad
 */
static inline int __access_ok(unsigned long addr, unsigned long size)
{
        unsigned long flag, tmp;

        __asm__("stc    r7_bank, %0\n\t"
                "mov.l  @(8,%0), %0\n\t"
                "clrt\n\t"
                "addc   %2, %1\n\t"
                "and    %1, %0\n\t"
                "rotcl  %0\n\t"
                "rotcl  %0\n\t"
                "and    #3, %0"
                : "=&z" (flag), "=r" (tmp)
                : "r" (addr), "1" (size)
                : "t");

        return flag == 0;
}
#endif /* CONFIG_MMU */

static inline int access_ok(int type, const void __user *p, unsigned long size)
{
        unsigned long addr = (unsigned long)p;
        return __access_ok(addr, size);
}

/*
 * Uh, these should become the main single-value transfer routines ...
 * They automatically use the right size if we just have the right
 * pointer type ...
 *
 * As SuperH uses the same address space for kernel and user data, we
 * can just do these as direct assignments.
 *
 * Careful to not
 * (a) re-use the arguments for side effects (sizeof is ok)
 * (b) require any knowledge of processes at this stage
 */
#define put_user(x,ptr) __put_user_check((x),(ptr),sizeof(*(ptr)))
#define get_user(x,ptr) __get_user_check((x),(ptr),sizeof(*(ptr)))

/*
 * The "__xxx" versions do not do address space checking, useful when
 * doing multiple accesses to the same area (the user has to do the
 * checks by hand with "access_ok()")
 */
#define __put_user(x,ptr) \
  __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
#define __get_user(x,ptr) \
  __get_user_nocheck((x),(ptr),sizeof(*(ptr)))

struct __large_struct { unsigned long buf[100]; };
#define __m(x) (*(struct __large_struct __user *)(x))

#define __get_user_size(x,ptr,size,retval)                      \
do {                                                            \
        retval = 0;                                             \
        __chk_user_ptr(ptr);                                    \
        switch (size) {                                         \
        case 1:                                                 \
                __get_user_asm(x, ptr, retval, "b");            \
                break;                                          \
        case 2:                                                 \
                __get_user_asm(x, ptr, retval, "w");            \
                break;                                          \
        case 4:                                                 \
                __get_user_asm(x, ptr, retval, "l");            \
                break;                                          \
        default:                                                \
                __get_user_unknown();                           \
                break;                                          \
        }                                                       \
} while (0)

#define __get_user_nocheck(x,ptr,size)                          \
({                                                              \
        long __gu_err, __gu_val;                                \
        __get_user_size(__gu_val, (ptr), (size), __gu_err);     \
        (x) = (__typeof__(*(ptr)))__gu_val;                     \
        __gu_err;                                               \
})

#ifdef CONFIG_MMU
#define __get_user_check(x,ptr,size)                            \
({                                                              \
        long __gu_err, __gu_val;                                \
        __chk_user_ptr(ptr);                                    \
        switch (size) {                                         \
        case 1:                                                 \
                __get_user_1(__gu_val, (ptr), __gu_err);        \
                break;                                          \
        case 2:                                                 \
                __get_user_2(__gu_val, (ptr), __gu_err);        \
                break;                                          \
        case 4:                                                 \
                __get_user_4(__gu_val, (ptr), __gu_err);        \
                break;                                          \
        default:                                                \
                __get_user_unknown();                           \
                break;                                          \
        }                                                       \
                                                                \
        (x) = (__typeof__(*(ptr)))__gu_val;                     \
        __gu_err;                                               \
})

#define __get_user_1(x,addr,err) ({             \
__asm__("stc    r7_bank, %1\n\t"                \
        "mov.l  @(8,%1), %1\n\t"                \
        "and    %2, %1\n\t"                     \
        "cmp/pz %1\n\t"                         \
        "bt/s   1f\n\t"                         \
        " mov   #0, %0\n\t"                     \
        "0:\n"                                  \
        "mov    #-14, %0\n\t"                   \
        "bra    2f\n\t"                         \
        " mov   #0, %1\n"                       \
        "1:\n\t"                                \
        "mov.b  @%2, %1\n\t"                    \
        "extu.b %1, %1\n"                       \
        "2:\n"                                  \
        ".section       __ex_table,\"a\"\n\t"   \
        ".long  1b, 0b\n\t"                     \
        ".previous"                             \
        : "=&r" (err), "=&r" (x)                \
        : "r" (addr)                            \
        : "t");                                 \
})

#define __get_user_2(x,addr,err) ({             \
__asm__("stc    r7_bank, %1\n\t"                \
        "mov.l  @(8,%1), %1\n\t"                \
        "and    %2, %1\n\t"                     \
        "cmp/pz %1\n\t"                         \
        "bt/s   1f\n\t"                         \
        " mov   #0, %0\n\t"                     \
        "0:\n"                                  \
        "mov    #-14, %0\n\t"                   \
        "bra    2f\n\t"                         \
        " mov   #0, %1\n"                       \
        "1:\n\t"                                \
        "mov.w  @%2, %1\n\t"                    \
        "extu.w %1, %1\n"                       \
        "2:\n"                                  \
        ".section       __ex_table,\"a\"\n\t"   \
        ".long  1b, 0b\n\t"                     \
        ".previous"                             \
        : "=&r" (err), "=&r" (x)                \
        : "r" (addr)                            \
        : "t");                                 \
})

#define __get_user_4(x,addr,err) ({             \
__asm__("stc    r7_bank, %1\n\t"                \
        "mov.l  @(8,%1), %1\n\t"                \
        "and    %2, %1\n\t"                     \
        "cmp/pz %1\n\t"                         \
        "bt/s   1f\n\t"                         \
        " mov   #0, %0\n\t"                     \
        "0:\n"                                  \
        "mov    #-14, %0\n\t"                   \
        "bra    2f\n\t"                         \
        " mov   #0, %1\n"                       \
        "1:\n\t"                                \
        "mov.l  @%2, %1\n\t"                    \
        "2:\n"                                  \
        ".section       __ex_table,\"a\"\n\t"   \
        ".long  1b, 0b\n\t"                     \
        ".previous"                             \
        : "=&r" (err), "=&r" (x)                \
        : "r" (addr)                            \
        : "t");                                 \
})
#else /* CONFIG_MMU */
#define __get_user_check(x,ptr,size)                                    \
({                                                                      \
        long __gu_err, __gu_val;                                        \
        if (__access_ok((unsigned long)(ptr), (size))) {                \
                __get_user_size(__gu_val, (ptr), (size), __gu_err);     \
                (x) = (__typeof__(*(ptr)))__gu_val;                     \
        } else                                                          \
                __gu_err = -EFAULT;                                     \
        __gu_err;                                                       \
})
#endif

#define __get_user_asm(x, addr, err, insn) \
({ \
__asm__ __volatile__( \
        "1:\n\t" \
        "mov." insn "   %2, %1\n\t" \
        "mov    #0, %0\n" \
        "2:\n" \
        ".section       .fixup,\"ax\"\n" \
        "3:\n\t" \
        "mov    #0, %1\n\t" \
        "mov.l  4f, %0\n\t" \
        "jmp    @%0\n\t" \
        " mov   %3, %0\n" \
        "4:     .long   2b\n\t" \
        ".previous\n" \
        ".section       __ex_table,\"a\"\n\t" \
        ".long  1b, 3b\n\t" \
        ".previous" \
        :"=&r" (err), "=&r" (x) \
        :"m" (__m(addr)), "i" (-EFAULT)); })

extern void __get_user_unknown(void);

#define __put_user_size(x,ptr,size,retval)              \
do {                                                    \
        retval = 0;                                     \
        __chk_user_ptr(ptr);                            \
        switch (size) {                                 \
        case 1:                                         \
                __put_user_asm(x, ptr, retval, "b");    \
                break;                                  \
        case 2:                                         \
                __put_user_asm(x, ptr, retval, "w");    \
                break;                                  \
        case 4:                                         \
                __put_user_asm(x, ptr, retval, "l");    \
                break;                                  \
        case 8:                                         \
                __put_user_u64(x, ptr, retval);         \
                break;                                  \
        default:                                        \
                __put_user_unknown();                   \
        }                                               \
} while (0)

#define __put_user_nocheck(x,ptr,size)                  \
({                                                      \
        long __pu_err;                                  \
        __put_user_size((x),(ptr),(size),__pu_err);     \
        __pu_err;                                       \
})

#define __put_user_check(x,ptr,size)                            \
({                                                              \
        long __pu_err = -EFAULT;                                \
        __typeof__(*(ptr)) __user *__pu_addr = (ptr);           \
                                                                \
        if (__access_ok((unsigned long)__pu_addr,size))         \
                __put_user_size((x),__pu_addr,(size),__pu_err); \
        __pu_err;                                               \
})

#define __put_user_asm(x, addr, err, insn) \
({ \
__asm__ __volatile__( \
        "1:\n\t" \
        "mov." insn "   %1, %2\n\t" \
        "mov    #0, %0\n" \
        "2:\n" \
        ".section       .fixup,\"ax\"\n" \
        "3:\n\t" \
        "nop\n\t" \
        "mov.l  4f, %0\n\t" \
        "jmp    @%0\n\t" \
        "mov    %3, %0\n" \
        "4:     .long   2b\n\t" \
        ".previous\n" \
        ".section       __ex_table,\"a\"\n\t" \
        ".long  1b, 3b\n\t" \
        ".previous" \
        :"=&r" (err) \
        :"r" (x), "m" (__m(addr)), "i" (-EFAULT) \
        :"memory"); })

#if defined(__LITTLE_ENDIAN__)
#define __put_user_u64(val,addr,retval) \
({ \
__asm__ __volatile__( \
        "1:\n\t" \
        "mov.l  %R1,%2\n\t" \
        "mov.l  %S1,%T2\n\t" \
        "mov    #0,%0\n" \
        "2:\n" \
        ".section       .fixup,\"ax\"\n" \
        "3:\n\t" \
        "nop\n\t" \
        "mov.l  4f,%0\n\t" \
        "jmp    @%0\n\t" \
        " mov   %3,%0\n" \
        "4:     .long   2b\n\t" \
        ".previous\n" \
        ".section       __ex_table,\"a\"\n\t" \
        ".long  1b, 3b\n\t" \
        ".previous" \
        : "=r" (retval) \
        : "r" (val), "m" (__m(addr)), "i" (-EFAULT) \
        : "memory"); })
#else
#define __put_user_u64(val,addr,retval) \
({ \
__asm__ __volatile__( \
        "1:\n\t" \
        "mov.l  %S1,%2\n\t" \
        "mov.l  %R1,%T2\n\t" \
        "mov    #0,%0\n" \
        "2:\n" \
        ".section       .fixup,\"ax\"\n" \
        "3:\n\t" \
        "nop\n\t" \
        "mov.l  4f,%0\n\t" \
        "jmp    @%0\n\t" \
        " mov   %3,%0\n" \
        "4:     .long   2b\n\t" \
        ".previous\n" \
        ".section       __ex_table,\"a\"\n\t" \
        ".long  1b, 3b\n\t" \
        ".previous" \
        : "=r" (retval) \
        : "r" (val), "m" (__m(addr)), "i" (-EFAULT) \
        : "memory"); })
#endif

extern void __put_user_unknown(void);

/* Generic arbitrary sized copy.  */
/* Return the number of bytes NOT copied */
__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n);

#define copy_to_user(to,from,n) ({ \
void *__copy_to = (void *) (to); \
__kernel_size_t __copy_size = (__kernel_size_t) (n); \
__kernel_size_t __copy_res; \
if(__copy_size && __access_ok((unsigned long)__copy_to, __copy_size)) { \
__copy_res = __copy_user(__copy_to, (void *) (from), __copy_size); \
} else __copy_res = __copy_size; \
__copy_res; })

#define copy_from_user(to,from,n) ({ \
void *__copy_to = (void *) (to); \
void *__copy_from = (void *) (from); \
__kernel_size_t __copy_size = (__kernel_size_t) (n); \
__kernel_size_t __copy_res; \
if(__copy_size && __access_ok((unsigned long)__copy_from, __copy_size)) { \
__copy_res = __copy_user(__copy_to, __copy_from, __copy_size); \
} else __copy_res = __copy_size; \
__copy_res; })

static __always_inline unsigned long
__copy_from_user(void *to, const void __user *from, unsigned long n)
{
        return __copy_user(to, (__force void *)from, n);
}

static __always_inline unsigned long __must_check
__copy_to_user(void __user *to, const void *from, unsigned long n)
{
        return __copy_user((__force void *)to, from, n);
}

#define __copy_to_user_inatomic __copy_to_user
#define __copy_from_user_inatomic __copy_from_user

/*
 * Clear the area and return remaining number of bytes
 * (on failure.  Usually it's 0.)
 */
extern __kernel_size_t __clear_user(void *addr, __kernel_size_t size);

#define clear_user(addr,n) ({ \
void * __cl_addr = (addr); \
unsigned long __cl_size = (n); \
if (__cl_size && __access_ok(((unsigned long)(__cl_addr)), __cl_size)) \
__cl_size = __clear_user(__cl_addr, __cl_size); \
__cl_size; })

static __inline__ int
__strncpy_from_user(unsigned long __dest, unsigned long __user __src, int __count)
{
        __kernel_size_t res;
        unsigned long __dummy, _d, _s;

        __asm__ __volatile__(
                "9:\n"
                "mov.b  @%2+, %1\n\t"
                "cmp/eq #0, %1\n\t"
                "bt/s   2f\n"
                "1:\n"
                "mov.b  %1, @%3\n\t"
                "dt     %7\n\t"
                "bf/s   9b\n\t"
                " add   #1, %3\n\t"
                "2:\n\t"
                "sub    %7, %0\n"
                "3:\n"
                ".section .fixup,\"ax\"\n"
                "4:\n\t"
                "mov.l  5f, %1\n\t"
                "jmp    @%1\n\t"
                " mov   %8, %0\n\t"
                ".balign 4\n"
                "5:     .long 3b\n"
                ".previous\n"
                ".section __ex_table,\"a\"\n"
                "       .balign 4\n"
                "       .long 9b,4b\n"
                ".previous"
                : "=r" (res), "=&z" (__dummy), "=r" (_s), "=r" (_d)
                : "0" (__count), "2" (__src), "3" (__dest), "r" (__count),
                  "i" (-EFAULT)
                : "memory", "t");

        return res;
}

#define strncpy_from_user(dest,src,count) ({ \
unsigned long __sfu_src = (unsigned long) (src); \
int __sfu_count = (int) (count); \
long __sfu_res = -EFAULT; \
if(__access_ok(__sfu_src, __sfu_count)) { \
__sfu_res = __strncpy_from_user((unsigned long) (dest), __sfu_src, __sfu_count); \
} __sfu_res; })

/*
 * Return the size of a string (including the ending 0!)
 */
static __inline__ long __strnlen_user(const char __user *__s, long __n)
{
        unsigned long res;
        unsigned long __dummy;

        __asm__ __volatile__(
                "9:\n"
                "cmp/eq %4, %0\n\t"
                "bt     2f\n"
                "1:\t"
                "mov.b  @(%0,%3), %1\n\t"
                "tst    %1, %1\n\t"
                "bf/s   9b\n\t"
                " add   #1, %0\n"
                "2:\n"
                ".section .fixup,\"ax\"\n"
                "3:\n\t"
                "mov.l  4f, %1\n\t"
                "jmp    @%1\n\t"
                " mov   #0, %0\n"
                ".balign 4\n"
                "4:     .long 2b\n"
                ".previous\n"
                ".section __ex_table,\"a\"\n"
                "       .balign 4\n"
                "       .long 1b,3b\n"
                ".previous"
                : "=z" (res), "=&r" (__dummy)
                : "0" (0), "r" (__s), "r" (__n)
                : "t");
        return res;
}

static __inline__ long strnlen_user(const char __user *s, long n)
{
        if (!__addr_ok(s))
                return 0;
        else
                return __strnlen_user(s, n);
}

#define strlen_user(str)        strnlen_user(str, ~0UL >> 1)

/*
 * The exception table consists of pairs of addresses: the first is the
 * address of an instruction that is allowed to fault, and the second is
 * the address at which the program should continue.  No registers are
 * modified, so it is entirely up to the continuation code to figure out
 * what to do.
 *
 * All the routines below use bits of fixup code that are out of line
 * with the main instruction path.  This means when everything is well,
 * we don't even have to jump over them.  Further, they do not intrude
 * on our cache or tlb entries.
 */

struct exception_table_entry
{
        unsigned long insn, fixup;
};

extern int fixup_exception(struct pt_regs *regs);

#endif /* __ASM_SH_UACCESS_H */