1 /* [xirc2ps_cs.c wk 03.11.99] (1.40 1999/11/18 00:06:03)
2 * Xircom CreditCard Ethernet Adapter IIps driver
3 * Xircom Realport 10/100 (RE-100) driver
5 * This driver supports various Xircom CreditCard Ethernet adapters
6 * including the CE2, CE IIps, RE-10, CEM28, CEM33, CE33, CEM56,
7 * CE3-100, CE3B, RE-100, REM10BT, and REM56G-100.
9 * 2000-09-24 <psheer@icon.co.za> The Xircom CE3B-100 may not
10 * autodetect the media properly. In this case use the
11 * if_port=1 (for 10BaseT) or if_port=4 (for 100BaseT) options
12 * to force the media type.
14 * Written originally by Werner Koch based on David Hinds' skeleton of the
17 * Copyright (c) 1997,1998 Werner Koch (dd9jn)
19 * This driver is free software; you can redistribute it and/or modify
20 * it under the terms of the GNU General Public License as published by
21 * the Free Software Foundation; either version 2 of the License, or
22 * (at your option) any later version.
24 * It is distributed in the hope that it will be useful,
25 * but WITHOUT ANY WARRANTY; without even the implied warranty of
26 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
27 * GNU General Public License for more details.
29 * You should have received a copy of the GNU General Public License
30 * along with this program; if not, write to the Free Software
31 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
34 * ALTERNATIVELY, this driver may be distributed under the terms of
35 * the following license, in which case the provisions of this license
36 * are required INSTEAD OF the GNU General Public License. (This clause
37 * is necessary due to a potential bad interaction between the GPL and
38 * the restrictions contained in a BSD-style copyright.)
40 * Redistribution and use in source and binary forms, with or without
41 * modification, are permitted provided that the following conditions
43 * 1. Redistributions of source code must retain the above copyright
44 * notice, and the entire permission notice in its entirety,
45 * including the disclaimer of warranties.
46 * 2. Redistributions in binary form must reproduce the above copyright
47 * notice, this list of conditions and the following disclaimer in the
48 * documentation and/or other materials provided with the distribution.
49 * 3. The name of the author may not be used to endorse or promote
50 * products derived from this software without specific prior
53 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
54 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
55 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
56 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
57 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
58 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
59 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
60 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
61 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
62 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
63 * OF THE POSSIBILITY OF SUCH DAMAGE.
66 #include <linux/module.h>
67 #include <linux/kernel.h>
68 #include <linux/init.h>
69 #include <linux/ptrace.h>
70 #include <linux/slab.h>
71 #include <linux/string.h>
72 #include <linux/timer.h>
73 #include <linux/interrupt.h>
75 #include <linux/delay.h>
76 #include <linux/ethtool.h>
77 #include <linux/netdevice.h>
78 #include <linux/etherdevice.h>
79 #include <linux/skbuff.h>
80 #include <linux/if_arp.h>
81 #include <linux/ioport.h>
82 #include <linux/bitops.h>
84 #include <pcmcia/cs_types.h>
85 #include <pcmcia/cs.h>
86 #include <pcmcia/cistpl.h>
87 #include <pcmcia/cisreg.h>
88 #include <pcmcia/ciscode.h>
91 #include <asm/system.h>
92 #include <asm/uaccess.h>
95 #define MANFID_COMPAQ 0x0138
96 #define MANFID_COMPAQ2 0x0183 /* is this correct? */
99 #include <pcmcia/ds.h>
101 /* Time in jiffies before concluding Tx hung */
102 #define TX_TIMEOUT ((400*HZ)/1000)
105 * Some constants used to access the hardware
108 /* Register offsets and value constans */
109 #define XIRCREG_CR 0 /* Command register (wr) */
111 TransmitPacket
= 0x01,
119 #define XIRCREG_ESR 0 /* Ethernet status register (rd) */
121 FullPktRcvd
= 0x01, /* full packet in receive buffer */
122 PktRejected
= 0x04, /* a packet has been rejected */
123 TxPktPend
= 0x08, /* TX Packet Pending */
124 IncorPolarity
= 0x10,
125 MediaSelect
= 0x20 /* set if TP, clear if AUI */
127 #define XIRCREG_PR 1 /* Page Register select */
128 #define XIRCREG_EDP 4 /* Ethernet Data Port Register */
129 #define XIRCREG_ISR 6 /* Ethernet Interrupt Status Register */
131 TxBufOvr
= 0x01, /* TX Buffer Overflow */
132 PktTxed
= 0x02, /* Packet Transmitted */
133 MACIntr
= 0x04, /* MAC Interrupt occurred */
134 TxResGrant
= 0x08, /* Tx Reservation Granted */
135 RxFullPkt
= 0x20, /* Rx Full Packet */
136 RxPktRej
= 0x40, /* Rx Packet Rejected */
137 ForcedIntr
= 0x80 /* Forced Interrupt */
139 #define XIRCREG1_IMR0 12 /* Ethernet Interrupt Mask Register (on page 1)*/
140 #define XIRCREG1_IMR1 13
141 #define XIRCREG0_TSO 8 /* Transmit Space Open Register (on page 0)*/
142 #define XIRCREG0_TRS 10 /* Transmit reservation Size Register (page 0)*/
143 #define XIRCREG0_DO 12 /* Data Offset Register (page 0) (wr) */
144 #define XIRCREG0_RSR 12 /* Receive Status Register (page 0) (rd) */
146 PhyPkt
= 0x01, /* set:physical packet, clear: multicast packet */
147 BrdcstPkt
= 0x02, /* set if it is a broadcast packet */
148 PktTooLong
= 0x04, /* set if packet length > 1518 */
149 AlignErr
= 0x10, /* incorrect CRC and last octet not complete */
150 CRCErr
= 0x20, /* incorrect CRC and last octet is complete */
151 PktRxOk
= 0x80 /* received ok */
153 #define XIRCREG0_PTR 13 /* packets transmitted register (rd) */
154 #define XIRCREG0_RBC 14 /* receive byte count regsister (rd) */
155 #define XIRCREG1_ECR 14 /* ethernet configurationn register */
157 FullDuplex
= 0x04, /* enable full duplex mode */
158 LongTPMode
= 0x08, /* adjust for longer lengths of TP cable */
159 DisablePolCor
= 0x10,/* disable auto polarity correction */
160 DisableLinkPulse
= 0x20, /* disable link pulse generation */
161 DisableAutoTx
= 0x40, /* disable auto-transmit */
163 #define XIRCREG2_RBS 8 /* receive buffer start register */
164 #define XIRCREG2_LED 10 /* LED Configuration register */
165 /* values for the leds: Bits 2-0 for led 1
166 * 0 disabled Bits 5-3 for led 2
175 #define XIRCREG2_MSR 12 /* Mohawk specific register */
177 #define XIRCREG4_GPR0 8 /* General Purpose Register 0 */
178 #define XIRCREG4_GPR1 9 /* General Purpose Register 1 */
179 #define XIRCREG2_GPR2 13 /* General Purpose Register 2 (page2!)*/
180 #define XIRCREG4_BOV 10 /* Bonding Version Register */
181 #define XIRCREG4_LMA 12 /* Local Memory Address Register */
182 #define XIRCREG4_LMD 14 /* Local Memory Data Port */
183 /* MAC register can only by accessed with 8 bit operations */
184 #define XIRCREG40_CMD0 8 /* Command Register (wr) */
185 enum xirc_cmd
{ /* Commands */
194 #define XIRCREG5_RHSA0 10 /* Rx Host Start Address */
195 #define XIRCREG40_RXST0 9 /* Receive Status Register */
196 #define XIRCREG40_TXST0 11 /* Transmit Status Register 0 */
197 #define XIRCREG40_TXST1 12 /* Transmit Status Register 10 */
198 #define XIRCREG40_RMASK0 13 /* Receive Mask Register */
199 #define XIRCREG40_TMASK0 14 /* Transmit Mask Register 0 */
200 #define XIRCREG40_TMASK1 15 /* Transmit Mask Register 0 */
201 #define XIRCREG42_SWC0 8 /* Software Configuration 0 */
202 #define XIRCREG42_SWC1 9 /* Software Configuration 1 */
203 #define XIRCREG42_BOC 10 /* Back-Off Configuration */
204 #define XIRCREG44_TDR0 8 /* Time Domain Reflectometry 0 */
205 #define XIRCREG44_TDR1 9 /* Time Domain Reflectometry 1 */
206 #define XIRCREG44_RXBC_LO 10 /* Rx Byte Count 0 (rd) */
207 #define XIRCREG44_RXBC_HI 11 /* Rx Byte Count 1 (rd) */
208 #define XIRCREG45_REV 15 /* Revision Register (rd) */
209 #define XIRCREG50_IA 8 /* Individual Address (8-13) */
211 static const char *if_names
[] = { "Auto", "10BaseT", "10Base2", "AUI", "100BaseT" };
214 * All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If
215 * you do not define PCMCIA_DEBUG at all, all the debug code will be
216 * left out. If you compile with PCMCIA_DEBUG=0, the debug code will
217 * be present but disabled -- but it can then be enabled for specific
218 * modules at load time with a 'pc_debug=#' option to insmod.
221 static int pc_debug
= PCMCIA_DEBUG
;
222 module_param(pc_debug
, int, 0);
223 #define DEBUG(n, args...) if (pc_debug>(n)) printk(KDBG_XIRC args)
225 #define DEBUG(n, args...)
228 #define KDBG_XIRC KERN_DEBUG "xirc2ps_cs: "
229 #define KERR_XIRC KERN_ERR "xirc2ps_cs: "
230 #define KWRN_XIRC KERN_WARNING "xirc2ps_cs: "
231 #define KNOT_XIRC KERN_NOTICE "xirc2ps_cs: "
232 #define KINF_XIRC KERN_INFO "xirc2ps_cs: "
235 #define XIR_UNKNOWN 0 /* unknown: not supported */
236 #define XIR_CE 1 /* (prodid 1) different hardware: not supported */
237 #define XIR_CE2 2 /* (prodid 2) */
238 #define XIR_CE3 3 /* (prodid 3) */
239 #define XIR_CEM 4 /* (prodid 1) different hardware: not supported */
240 #define XIR_CEM2 5 /* (prodid 2) */
241 #define XIR_CEM3 6 /* (prodid 3) */
242 #define XIR_CEM33 7 /* (prodid 4) */
243 #define XIR_CEM56M 8 /* (prodid 5) */
244 #define XIR_CEM56 9 /* (prodid 6) */
245 #define XIR_CM28 10 /* (prodid 3) modem only: not supported here */
246 #define XIR_CM33 11 /* (prodid 4) modem only: not supported here */
247 #define XIR_CM56 12 /* (prodid 5) modem only: not supported here */
248 #define XIR_CG 13 /* (prodid 1) GSM modem only: not supported */
249 #define XIR_CBE 14 /* (prodid 1) cardbus ethernet: not supported */
250 /*====================================================================*/
252 /* Module parameters */
254 MODULE_DESCRIPTION("Xircom PCMCIA ethernet driver");
255 MODULE_LICENSE("Dual MPL/GPL");
257 #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
259 INT_MODULE_PARM(if_port
, 0);
260 INT_MODULE_PARM(full_duplex
, 0);
261 INT_MODULE_PARM(do_sound
, 1);
262 INT_MODULE_PARM(lockup_hack
, 0); /* anti lockup hack */
264 /*====================================================================*/
266 /* We do not process more than these number of bytes during one
267 * interrupt. (Of course we receive complete packets, so this is not
269 * Something between 2000..22000; first value gives best interrupt latency,
270 * the second enables the usage of the complete on-chip buffer. We use the
271 * high value as the initial value.
273 static unsigned maxrx_bytes
= 22000;
275 /* MII management prototypes */
276 static void mii_idle(unsigned int ioaddr
);
277 static void mii_putbit(unsigned int ioaddr
, unsigned data
);
278 static int mii_getbit(unsigned int ioaddr
);
279 static void mii_wbits(unsigned int ioaddr
, unsigned data
, int len
);
280 static unsigned mii_rd(unsigned int ioaddr
, u_char phyaddr
, u_char phyreg
);
281 static void mii_wr(unsigned int ioaddr
, u_char phyaddr
, u_char phyreg
,
282 unsigned data
, int len
);
285 * The event() function is this driver's Card Services event handler.
286 * It will be called by Card Services when an appropriate card status
287 * event is received. The config() and release() entry points are
288 * used to configure or release a socket, in response to card insertion
289 * and ejection events. They are invoked from the event handler.
292 static int has_ce2_string(struct pcmcia_device
* link
);
293 static int xirc2ps_config(struct pcmcia_device
* link
);
294 static void xirc2ps_release(struct pcmcia_device
* link
);
297 * The attach() and detach() entry points are used to create and destroy
298 * "instances" of the driver, where each instance represents everything
299 * needed to manage one actual PCMCIA card.
302 static void xirc2ps_detach(struct pcmcia_device
*p_dev
);
305 * You'll also need to prototype all the functions that will actually
306 * be used to talk to your device. See 'pcmem_cs' for a good example
307 * of a fully self-sufficient driver; the other drivers rely more or
308 * less on other parts of the kernel.
311 static irqreturn_t
xirc2ps_interrupt(int irq
, void *dev_id
);
314 * A linked list of "instances" of the device. Each actual
315 * PCMCIA card corresponds to one device instance, and is described
316 * by one struct pcmcia_device structure (defined in ds.h).
318 * You may not want to use a linked list for this -- for example, the
319 * memory card driver uses an array of struct pcmcia_device pointers, where minor
320 * device numbers are used to derive the corresponding array index.
324 * A driver needs to provide a dev_node_t structure for each device
325 * on a card. In some cases, there is only one device per card (for
326 * example, ethernet cards, modems). In other cases, there may be
327 * many actual or logical devices (SCSI adapters, memory cards with
328 * multiple partitions). The dev_node_t structures need to be kept
329 * in a linked list starting at the 'dev' field of a struct pcmcia_device
330 * structure. We allocate them in the card's private data structure,
331 * because they generally can't be allocated dynamically.
334 typedef struct local_info_t
{
335 struct net_device
*dev
;
336 struct pcmcia_device
*p_dev
;
338 struct net_device_stats stats
;
341 int silicon
; /* silicon revision. 0=old CE2, 1=Scipper, 4=Mohawk */
342 int mohawk
; /* a CE3 type card */
343 int dingo
; /* a CEM56 type card */
344 int new_mii
; /* has full 10baseT/100baseT MII */
345 int modem
; /* is a multi function card (i.e with a modem) */
346 void __iomem
*dingo_ccr
; /* only used for CEM56 cards */
347 unsigned last_ptr_value
; /* last packets transmitted value */
348 const char *manf_str
;
349 struct work_struct tx_timeout_task
;
353 * Some more prototypes
355 static int do_start_xmit(struct sk_buff
*skb
, struct net_device
*dev
);
356 static void xirc_tx_timeout(struct net_device
*dev
);
357 static void xirc2ps_tx_timeout_task(struct work_struct
*work
);
358 static struct net_device_stats
*do_get_stats(struct net_device
*dev
);
359 static void set_addresses(struct net_device
*dev
);
360 static void set_multicast_list(struct net_device
*dev
);
361 static int set_card_type(struct pcmcia_device
*link
, const void *s
);
362 static int do_config(struct net_device
*dev
, struct ifmap
*map
);
363 static int do_open(struct net_device
*dev
);
364 static int do_ioctl(struct net_device
*dev
, struct ifreq
*rq
, int cmd
);
365 static const struct ethtool_ops netdev_ethtool_ops
;
366 static void hardreset(struct net_device
*dev
);
367 static void do_reset(struct net_device
*dev
, int full
);
368 static int init_mii(struct net_device
*dev
);
369 static void do_powerdown(struct net_device
*dev
);
370 static int do_stop(struct net_device
*dev
);
372 /*=============== Helper functions =========================*/
374 first_tuple(struct pcmcia_device
*handle
, tuple_t
*tuple
, cisparse_t
*parse
)
378 if ((err
= pcmcia_get_first_tuple(handle
, tuple
)) == 0 &&
379 (err
= pcmcia_get_tuple_data(handle
, tuple
)) == 0)
380 err
= pcmcia_parse_tuple(tuple
, parse
);
385 next_tuple(struct pcmcia_device
*handle
, tuple_t
*tuple
, cisparse_t
*parse
)
389 if ((err
= pcmcia_get_next_tuple(handle
, tuple
)) == 0 &&
390 (err
= pcmcia_get_tuple_data(handle
, tuple
)) == 0)
391 err
= pcmcia_parse_tuple(tuple
, parse
);
395 #define SelectPage(pgnr) outb((pgnr), ioaddr + XIRCREG_PR)
396 #define GetByte(reg) ((unsigned)inb(ioaddr + (reg)))
397 #define GetWord(reg) ((unsigned)inw(ioaddr + (reg)))
398 #define PutByte(reg,value) outb((value), ioaddr+(reg))
399 #define PutWord(reg,value) outw((value), ioaddr+(reg))
401 /*====== Functions used for debugging =================================*/
402 #if defined(PCMCIA_DEBUG) && 0 /* reading regs may change system status */
404 PrintRegisters(struct net_device
*dev
)
406 unsigned int ioaddr
= dev
->base_addr
;
411 printk(KDBG_XIRC
"Register common: ");
412 for (i
= 0; i
< 8; i
++)
413 printk(" %2.2x", GetByte(i
));
415 for (page
= 0; page
<= 8; page
++) {
416 printk(KDBG_XIRC
"Register page %2x: ", page
);
418 for (i
= 8; i
< 16; i
++)
419 printk(" %2.2x", GetByte(i
));
422 for (page
=0x40 ; page
<= 0x5f; page
++) {
423 if (page
== 0x43 || (page
>= 0x46 && page
<= 0x4f)
424 || (page
>= 0x51 && page
<=0x5e))
426 printk(KDBG_XIRC
"Register page %2x: ", page
);
428 for (i
= 8; i
< 16; i
++)
429 printk(" %2.2x", GetByte(i
));
434 #endif /* PCMCIA_DEBUG */
436 /*============== MII Management functions ===============*/
439 * Turn around for read
442 mii_idle(unsigned int ioaddr
)
444 PutByte(XIRCREG2_GPR2
, 0x04|0); /* drive MDCK low */
446 PutByte(XIRCREG2_GPR2
, 0x04|1); /* and drive MDCK high */
451 * Write a bit to MDI/O
454 mii_putbit(unsigned int ioaddr
, unsigned data
)
458 PutByte(XIRCREG2_GPR2
, 0x0c|2|0); /* set MDIO */
460 PutByte(XIRCREG2_GPR2
, 0x0c|2|1); /* and drive MDCK high */
463 PutByte(XIRCREG2_GPR2
, 0x0c|0|0); /* clear MDIO */
465 PutByte(XIRCREG2_GPR2
, 0x0c|0|1); /* and drive MDCK high */
470 PutWord(XIRCREG2_GPR2
-1, 0x0e0e);
472 PutWord(XIRCREG2_GPR2
-1, 0x0f0f);
475 PutWord(XIRCREG2_GPR2
-1, 0x0c0c);
477 PutWord(XIRCREG2_GPR2
-1, 0x0d0d);
484 * Get a bit from MDI/O
487 mii_getbit(unsigned int ioaddr
)
491 PutByte(XIRCREG2_GPR2
, 4|0); /* drive MDCK low */
493 d
= GetByte(XIRCREG2_GPR2
); /* read MDIO */
494 PutByte(XIRCREG2_GPR2
, 4|1); /* drive MDCK high again */
496 return d
& 0x20; /* read MDIO */
500 mii_wbits(unsigned int ioaddr
, unsigned data
, int len
)
502 unsigned m
= 1 << (len
-1);
504 mii_putbit(ioaddr
, data
& m
);
508 mii_rd(unsigned int ioaddr
, u_char phyaddr
, u_char phyreg
)
514 for (i
=0; i
< 32; i
++) /* 32 bit preamble */
515 mii_putbit(ioaddr
, 1);
516 mii_wbits(ioaddr
, 0x06, 4); /* Start and opcode for read */
517 mii_wbits(ioaddr
, phyaddr
, 5); /* PHY address to be accessed */
518 mii_wbits(ioaddr
, phyreg
, 5); /* PHY register to read */
519 mii_idle(ioaddr
); /* turn around */
522 for (m
= 1<<15; m
; m
>>= 1)
523 if (mii_getbit(ioaddr
))
530 mii_wr(unsigned int ioaddr
, u_char phyaddr
, u_char phyreg
, unsigned data
,
536 for (i
=0; i
< 32; i
++) /* 32 bit preamble */
537 mii_putbit(ioaddr
, 1);
538 mii_wbits(ioaddr
, 0x05, 4); /* Start and opcode for write */
539 mii_wbits(ioaddr
, phyaddr
, 5); /* PHY address to be accessed */
540 mii_wbits(ioaddr
, phyreg
, 5); /* PHY Register to write */
541 mii_putbit(ioaddr
, 1); /* turn around */
542 mii_putbit(ioaddr
, 0);
543 mii_wbits(ioaddr
, data
, len
); /* And write the data */
547 /*============= Main bulk of functions =========================*/
550 * xirc2ps_attach() creates an "instance" of the driver, allocating
551 * local data structures for one device. The device is registered
552 * with Card Services.
554 * The dev_link structure is initialized, but we don't actually
555 * configure the card at this point -- we wait until we receive a
556 * card insertion event.
560 xirc2ps_probe(struct pcmcia_device
*link
)
562 struct net_device
*dev
;
565 DEBUG(0, "attach()\n");
567 /* Allocate the device structure */
568 dev
= alloc_etherdev(sizeof(local_info_t
));
571 local
= netdev_priv(dev
);
576 /* General socket configuration */
577 link
->conf
.Attributes
= CONF_ENABLE_IRQ
;
578 link
->conf
.IntType
= INT_MEMORY_AND_IO
;
579 link
->conf
.ConfigIndex
= 1;
580 link
->irq
.Handler
= xirc2ps_interrupt
;
581 link
->irq
.Instance
= dev
;
583 /* Fill in card specific entries */
584 dev
->hard_start_xmit
= &do_start_xmit
;
585 dev
->set_config
= &do_config
;
586 dev
->get_stats
= &do_get_stats
;
587 dev
->do_ioctl
= &do_ioctl
;
588 SET_ETHTOOL_OPS(dev
, &netdev_ethtool_ops
);
589 dev
->set_multicast_list
= &set_multicast_list
;
590 dev
->open
= &do_open
;
591 dev
->stop
= &do_stop
;
592 #ifdef HAVE_TX_TIMEOUT
593 dev
->tx_timeout
= xirc_tx_timeout
;
594 dev
->watchdog_timeo
= TX_TIMEOUT
;
595 INIT_WORK(&local
->tx_timeout_task
, xirc2ps_tx_timeout_task
);
598 return xirc2ps_config(link
);
599 } /* xirc2ps_attach */
602 * This deletes a driver "instance". The device is de-registered
603 * with Card Services. If it has been released, all local data
604 * structures are freed. Otherwise, the structures will be freed
605 * when the device is released.
609 xirc2ps_detach(struct pcmcia_device
*link
)
611 struct net_device
*dev
= link
->priv
;
613 DEBUG(0, "detach(0x%p)\n", link
);
616 unregister_netdev(dev
);
618 xirc2ps_release(link
);
621 } /* xirc2ps_detach */
624 * Detect the type of the card. s is the buffer with the data of tuple 0x20
625 * Returns: 0 := not supported
626 * mediaid=11 and prodid=47
642 set_card_type(struct pcmcia_device
*link
, const void *s
)
644 struct net_device
*dev
= link
->priv
;
645 local_info_t
*local
= netdev_priv(dev
);
647 unsigned cisrev
= ((const unsigned char *)s
)[2];
649 unsigned mediaid
= ((const unsigned char *)s
)[3];
650 unsigned prodid
= ((const unsigned char *)s
)[4];
652 DEBUG(0, "cisrev=%02x mediaid=%02x prodid=%02x\n",
653 cisrev
, mediaid
, prodid
);
658 local
->card_type
= XIR_UNKNOWN
;
659 if (!(prodid
& 0x40)) {
660 printk(KNOT_XIRC
"Ooops: Not a creditcard\n");
663 if (!(mediaid
& 0x01)) {
664 printk(KNOT_XIRC
"Not an Ethernet card\n");
667 if (mediaid
& 0x10) {
669 switch(prodid
& 15) {
670 case 1: local
->card_type
= XIR_CEM
; break;
671 case 2: local
->card_type
= XIR_CEM2
; break;
672 case 3: local
->card_type
= XIR_CEM3
; break;
673 case 4: local
->card_type
= XIR_CEM33
; break;
674 case 5: local
->card_type
= XIR_CEM56M
;
678 case 7: /* 7 is the RealPort 10/56 */
679 local
->card_type
= XIR_CEM56
;
685 switch(prodid
& 15) {
686 case 1: local
->card_type
= has_ce2_string(link
)? XIR_CE2
: XIR_CE
;
688 case 2: local
->card_type
= XIR_CE2
; break;
689 case 3: local
->card_type
= XIR_CE3
;
694 if (local
->card_type
== XIR_CE
|| local
->card_type
== XIR_CEM
) {
695 printk(KNOT_XIRC
"Sorry, this is an old CE card\n");
698 if (local
->card_type
== XIR_UNKNOWN
)
699 printk(KNOT_XIRC
"unknown card (mediaid=%02x prodid=%02x)\n",
706 * There are some CE2 cards out which claim to be a CE card.
707 * This function looks for a "CE2" in the 3rd version field.
708 * Returns: true if this is a CE2
711 has_ce2_string(struct pcmcia_device
* p_dev
)
713 if (p_dev
->prod_id
[2] && strstr(p_dev
->prod_id
[2], "CE2"))
719 xirc2ps_config_modem(struct pcmcia_device
*p_dev
,
720 cistpl_cftable_entry_t
*cf
,
721 cistpl_cftable_entry_t
*dflt
,
727 if (cf
->io
.nwin
> 0 && (cf
->io
.win
[0].base
& 0xf) == 8) {
728 for (ioaddr
= 0x300; ioaddr
< 0x400; ioaddr
+= 0x10) {
729 p_dev
->io
.BasePort2
= cf
->io
.win
[0].base
;
730 p_dev
->io
.BasePort1
= ioaddr
;
731 if (!pcmcia_request_io(p_dev
, &p_dev
->io
))
739 xirc2ps_config_check(struct pcmcia_device
*p_dev
,
740 cistpl_cftable_entry_t
*cf
,
741 cistpl_cftable_entry_t
*dflt
,
745 int *pass
= priv_data
;
747 if (cf
->io
.nwin
> 0 && (cf
->io
.win
[0].base
& 0xf) == 8) {
748 p_dev
->io
.BasePort2
= cf
->io
.win
[0].base
;
749 p_dev
->io
.BasePort1
= p_dev
->io
.BasePort2
750 + (*pass
? (cf
->index
& 0x20 ? -24:8)
751 : (cf
->index
& 0x20 ? 8:-24));
752 if (!pcmcia_request_io(p_dev
, &p_dev
->io
))
760 * xirc2ps_config() is scheduled to run after a CARD_INSERTION event
761 * is received, to configure the PCMCIA socket, and to make the
762 * ethernet device available to the system.
765 xirc2ps_config(struct pcmcia_device
* link
)
767 struct net_device
*dev
= link
->priv
;
768 local_info_t
*local
= netdev_priv(dev
);
774 cistpl_lan_node_id_t
*node_id
= (cistpl_lan_node_id_t
*)parse
.funce
.data
;
775 DECLARE_MAC_BUF(mac
);
777 local
->dingo_ccr
= NULL
;
779 DEBUG(0, "config(0x%p)\n", link
);
782 * This reads the card's CONFIG tuple to find its configuration
785 tuple
.Attributes
= 0;
786 tuple
.TupleData
= buf
;
787 tuple
.TupleDataMax
= 64;
788 tuple
.TupleOffset
= 0;
790 /* Is this a valid card */
791 tuple
.DesiredTuple
= CISTPL_MANFID
;
792 if ((err
=first_tuple(link
, &tuple
, &parse
))) {
793 printk(KNOT_XIRC
"manfid not found in CIS\n");
797 switch(parse
.manfid
.manf
) {
799 local
->manf_str
= "Xircom";
802 local
->manf_str
= "Accton";
806 local
->manf_str
= "Compaq";
809 local
->manf_str
= "Intel";
812 local
->manf_str
= "Toshiba";
815 printk(KNOT_XIRC
"Unknown Card Manufacturer ID: 0x%04x\n",
816 (unsigned)parse
.manfid
.manf
);
819 DEBUG(0, "found %s card\n", local
->manf_str
);
821 if (!set_card_type(link
, buf
)) {
822 printk(KNOT_XIRC
"this card is not supported\n");
826 /* get the ethernet address from the CIS */
827 tuple
.DesiredTuple
= CISTPL_FUNCE
;
828 for (err
= first_tuple(link
, &tuple
, &parse
); !err
;
829 err
= next_tuple(link
, &tuple
, &parse
)) {
830 /* Once I saw two CISTPL_FUNCE_LAN_NODE_ID entries:
831 * the first one with a length of zero the second correct -
832 * so I skip all entries with length 0 */
833 if (parse
.funce
.type
== CISTPL_FUNCE_LAN_NODE_ID
834 && ((cistpl_lan_node_id_t
*)parse
.funce
.data
)->nb
)
837 if (err
) { /* not found: try to get the node-id from tuple 0x89 */
838 tuple
.DesiredTuple
= 0x89; /* data layout looks like tuple 0x22 */
839 if ((err
= pcmcia_get_first_tuple(link
, &tuple
)) == 0 &&
840 (err
= pcmcia_get_tuple_data(link
, &tuple
)) == 0) {
841 if (tuple
.TupleDataLen
== 8 && *buf
== CISTPL_FUNCE_LAN_NODE_ID
)
842 memcpy(&parse
, buf
, 8);
847 if (err
) { /* another try (James Lehmer's CE2 version 4.1)*/
848 tuple
.DesiredTuple
= CISTPL_FUNCE
;
849 for (err
= first_tuple(link
, &tuple
, &parse
); !err
;
850 err
= next_tuple(link
, &tuple
, &parse
)) {
851 if (parse
.funce
.type
== 0x02 && parse
.funce
.data
[0] == 1
852 && parse
.funce
.data
[1] == 6 && tuple
.TupleDataLen
== 13) {
854 memcpy(&parse
, buf
+1, 8);
860 printk(KNOT_XIRC
"node-id not found in CIS\n");
863 node_id
= (cistpl_lan_node_id_t
*)parse
.funce
.data
;
864 if (node_id
->nb
!= 6) {
865 printk(KNOT_XIRC
"malformed node-id in CIS\n");
868 for (i
=0; i
< 6; i
++)
869 dev
->dev_addr
[i
] = node_id
->id
[i
];
871 link
->io
.IOAddrLines
=10;
872 link
->io
.Attributes1
= IO_DATA_PATH_WIDTH_16
;
873 link
->irq
.Attributes
= IRQ_HANDLE_PRESENT
;
874 link
->irq
.IRQInfo1
= IRQ_LEVEL_ID
;
879 link
->conf
.Attributes
|= CONF_ENABLE_SPKR
;
880 link
->conf
.Status
|= CCSR_AUDIO_ENA
;
882 link
->irq
.Attributes
|= IRQ_TYPE_DYNAMIC_SHARING
|IRQ_FIRST_SHARED
;
883 link
->io
.NumPorts2
= 8;
884 link
->io
.Attributes2
= IO_DATA_PATH_WIDTH_8
;
886 /* Take the Modem IO port from the CIS and scan for a free
888 link
->io
.NumPorts1
= 16; /* no Mako stuff anymore */
889 if (!pcmcia_loop_config(link
, xirc2ps_config_modem
, NULL
))
892 link
->io
.NumPorts1
= 18;
893 /* We do 2 passes here: The first one uses the regular mapping and
894 * the second tries again, thereby considering that the 32 ports are
895 * mirrored every 32 bytes. Actually we use a mirrored port for
896 * the Mako if (on the first pass) the COR bit 5 is set.
898 for (pass
=0; pass
< 2; pass
++)
899 if (!pcmcia_loop_config(link
, xirc2ps_config_check
, &pass
))
901 /* if special option:
902 * try to configure as Ethernet only.
905 printk(KNOT_XIRC
"no ports available\n");
907 link
->irq
.Attributes
|= IRQ_TYPE_DYNAMIC_SHARING
;
908 link
->io
.NumPorts1
= 16;
909 for (ioaddr
= 0x300; ioaddr
< 0x400; ioaddr
+= 0x10) {
910 link
->io
.BasePort1
= ioaddr
;
911 if (!(err
=pcmcia_request_io(link
, &link
->io
)))
914 link
->io
.BasePort1
= 0; /* let CS decide */
915 if ((err
=pcmcia_request_io(link
, &link
->io
))) {
916 cs_error(link
, RequestIO
, err
);
925 * Now allocate an interrupt line. Note that this does not
926 * actually assign a handler to the interrupt.
928 if ((err
=pcmcia_request_irq(link
, &link
->irq
))) {
929 cs_error(link
, RequestIRQ
, err
);
934 * This actually configures the PCMCIA socket -- setting up
935 * the I/O windows and the interrupt mapping.
937 if ((err
=pcmcia_request_configuration(link
, &link
->conf
))) {
938 cs_error(link
, RequestConfiguration
, err
);
947 /* Reset the modem's BAR to the correct value
948 * This is necessary because in the RequestConfiguration call,
949 * the base address of the ethernet port (BasePort1) is written
950 * to the BAR registers of the modem.
952 reg
.Action
= CS_WRITE
;
953 reg
.Offset
= CISREG_IOBASE_0
;
954 reg
.Value
= link
->io
.BasePort2
& 0xff;
955 if ((err
= pcmcia_access_configuration_register(link
, ®
))) {
956 cs_error(link
, AccessConfigurationRegister
, err
);
959 reg
.Action
= CS_WRITE
;
960 reg
.Offset
= CISREG_IOBASE_1
;
961 reg
.Value
= (link
->io
.BasePort2
>> 8) & 0xff;
962 if ((err
= pcmcia_access_configuration_register(link
, ®
))) {
963 cs_error(link
, AccessConfigurationRegister
, err
);
967 /* There is no config entry for the Ethernet part which
968 * is at 0x0800. So we allocate a window into the attribute
969 * memory and write direct to the CIS registers
971 req
.Attributes
= WIN_DATA_WIDTH_8
|WIN_MEMORY_TYPE_AM
|WIN_ENABLE
;
972 req
.Base
= req
.Size
= 0;
974 if ((err
= pcmcia_request_window(&link
, &req
, &link
->win
))) {
975 cs_error(link
, RequestWindow
, err
);
978 local
->dingo_ccr
= ioremap(req
.Base
,0x1000) + 0x0800;
979 mem
.CardOffset
= 0x0;
981 if ((err
= pcmcia_map_mem_page(link
->win
, &mem
))) {
982 cs_error(link
, MapMemPage
, err
);
986 /* Setup the CCRs; there are no infos in the CIS about the Ethernet
989 writeb(0x47, local
->dingo_ccr
+ CISREG_COR
);
990 ioaddr
= link
->io
.BasePort1
;
991 writeb(ioaddr
& 0xff , local
->dingo_ccr
+ CISREG_IOBASE_0
);
992 writeb((ioaddr
>> 8)&0xff , local
->dingo_ccr
+ CISREG_IOBASE_1
);
997 printk(KERN_INFO
"ECOR:");
998 for (i
=0; i
< 7; i
++) {
999 tmp
= readb(local
->dingo_ccr
+ i
*2);
1000 printk(" %02x", tmp
);
1003 printk(KERN_INFO
"DCOR:");
1004 for (i
=0; i
< 4; i
++) {
1005 tmp
= readb(local
->dingo_ccr
+ 0x20 + i
*2);
1006 printk(" %02x", tmp
);
1009 printk(KERN_INFO
"SCOR:");
1010 for (i
=0; i
< 10; i
++) {
1011 tmp
= readb(local
->dingo_ccr
+ 0x40 + i
*2);
1012 printk(" %02x", tmp
);
1018 writeb(0x01, local
->dingo_ccr
+ 0x20);
1019 writeb(0x0c, local
->dingo_ccr
+ 0x22);
1020 writeb(0x00, local
->dingo_ccr
+ 0x24);
1021 writeb(0x00, local
->dingo_ccr
+ 0x26);
1022 writeb(0x00, local
->dingo_ccr
+ 0x28);
1025 /* The if_port symbol can be set when the module is loaded */
1026 local
->probe_port
=0;
1028 local
->probe_port
= dev
->if_port
= 1;
1029 } else if ((if_port
>= 1 && if_port
<= 2) ||
1030 (local
->mohawk
&& if_port
==4))
1031 dev
->if_port
= if_port
;
1033 printk(KNOT_XIRC
"invalid if_port requested\n");
1035 /* we can now register the device with the net subsystem */
1036 dev
->irq
= link
->irq
.AssignedIRQ
;
1037 dev
->base_addr
= link
->io
.BasePort1
;
1040 do_reset(dev
, 1); /* a kludge to make the cem56 work */
1042 link
->dev_node
= &local
->node
;
1043 SET_NETDEV_DEV(dev
, &handle_to_dev(link
));
1045 if ((err
=register_netdev(dev
))) {
1046 printk(KNOT_XIRC
"register_netdev() failed\n");
1047 link
->dev_node
= NULL
;
1051 strcpy(local
->node
.dev_name
, dev
->name
);
1053 /* give some infos about the hardware */
1054 printk(KERN_INFO
"%s: %s: port %#3lx, irq %d, hwaddr %s\n",
1055 dev
->name
, local
->manf_str
,(u_long
)dev
->base_addr
, (int)dev
->irq
,
1056 print_mac(mac
, dev
->dev_addr
));
1061 xirc2ps_release(link
);
1066 } /* xirc2ps_config */
1069 * After a card is removed, xirc2ps_release() will unregister the net
1070 * device, and release the PCMCIA configuration. If the device is
1071 * still open, this will be postponed until it is closed.
1074 xirc2ps_release(struct pcmcia_device
*link
)
1076 DEBUG(0, "release(0x%p)\n", link
);
1079 struct net_device
*dev
= link
->priv
;
1080 local_info_t
*local
= netdev_priv(dev
);
1082 iounmap(local
->dingo_ccr
- 0x0800);
1084 pcmcia_disable_device(link
);
1085 } /* xirc2ps_release */
1087 /*====================================================================*/
1090 static int xirc2ps_suspend(struct pcmcia_device
*link
)
1092 struct net_device
*dev
= link
->priv
;
1095 netif_device_detach(dev
);
1102 static int xirc2ps_resume(struct pcmcia_device
*link
)
1104 struct net_device
*dev
= link
->priv
;
1108 netif_device_attach(dev
);
1115 /*====================================================================*/
1118 * This is the Interrupt service route.
1121 xirc2ps_interrupt(int irq
, void *dev_id
)
1123 struct net_device
*dev
= (struct net_device
*)dev_id
;
1124 local_info_t
*lp
= netdev_priv(dev
);
1125 unsigned int ioaddr
;
1127 unsigned bytes_rcvd
;
1128 unsigned int_status
, eth_status
, rx_status
, tx_status
;
1129 unsigned rsr
, pktlen
;
1130 ulong start_ticks
= jiffies
; /* fixme: jiffies rollover every 497 days
1131 * is this something to worry about?
1135 if (!netif_device_present(dev
))
1138 ioaddr
= dev
->base_addr
;
1139 if (lp
->mohawk
) { /* must disable the interrupt */
1140 PutByte(XIRCREG_CR
, 0);
1143 DEBUG(6, "%s: interrupt %d at %#x.\n", dev
->name
, irq
, ioaddr
);
1145 saved_page
= GetByte(XIRCREG_PR
);
1146 /* Read the ISR to see whats the cause for the interrupt.
1147 * This also clears the interrupt flags on CE2 cards
1149 int_status
= GetByte(XIRCREG_ISR
);
1152 if (int_status
== 0xff) { /* card may be ejected */
1153 DEBUG(3, "%s: interrupt %d for dead card\n", dev
->name
, irq
);
1156 eth_status
= GetByte(XIRCREG_ESR
);
1159 rx_status
= GetByte(XIRCREG40_RXST0
);
1160 PutByte(XIRCREG40_RXST0
, (~rx_status
& 0xff));
1161 tx_status
= GetByte(XIRCREG40_TXST0
);
1162 tx_status
|= GetByte(XIRCREG40_TXST1
) << 8;
1163 PutByte(XIRCREG40_TXST0
, 0);
1164 PutByte(XIRCREG40_TXST1
, 0);
1166 DEBUG(3, "%s: ISR=%#2.2x ESR=%#2.2x RSR=%#2.2x TSR=%#4.4x\n",
1167 dev
->name
, int_status
, eth_status
, rx_status
, tx_status
);
1169 /***** receive section ******/
1171 while (eth_status
& FullPktRcvd
) {
1172 rsr
= GetByte(XIRCREG0_RSR
);
1173 if (bytes_rcvd
> maxrx_bytes
&& (rsr
& PktRxOk
)) {
1174 /* too many bytes received during this int, drop the rest of the
1176 lp
->stats
.rx_dropped
++;
1177 DEBUG(2, "%s: RX drop, too much done\n", dev
->name
);
1178 } else if (rsr
& PktRxOk
) {
1179 struct sk_buff
*skb
;
1181 pktlen
= GetWord(XIRCREG0_RBC
);
1182 bytes_rcvd
+= pktlen
;
1184 DEBUG(5, "rsr=%#02x packet_length=%u\n", rsr
, pktlen
);
1186 skb
= dev_alloc_skb(pktlen
+3); /* 1 extra so we can use insw */
1188 printk(KNOT_XIRC
"low memory, packet dropped (size=%u)\n",
1190 lp
->stats
.rx_dropped
++;
1191 } else { /* okay get the packet */
1192 skb_reserve(skb
, 2);
1193 if (lp
->silicon
== 0 ) { /* work around a hardware bug */
1194 unsigned rhsa
; /* receive start address */
1197 rhsa
= GetWord(XIRCREG5_RHSA0
);
1199 rhsa
+= 3; /* skip control infos */
1202 if (rhsa
+ pktlen
> 0x8000) {
1204 u_char
*buf
= skb_put(skb
, pktlen
);
1205 for (i
=0; i
< pktlen
; i
++, rhsa
++) {
1206 buf
[i
] = GetByte(XIRCREG_EDP
);
1207 if (rhsa
== 0x8000) {
1213 insw(ioaddr
+XIRCREG_EDP
,
1214 skb_put(skb
, pktlen
), (pktlen
+1)>>1);
1218 else if (lp
->mohawk
) {
1219 /* To use this 32 bit access we should use
1220 * a manual optimized loop
1221 * Also the words are swapped, we can get more
1222 * performance by using 32 bit access and swapping
1223 * the words in a register. Will need this for cardbus
1225 * Note: don't forget to change the ALLOC_SKB to .. +3
1228 u_long
*p
= skb_put(skb
, pktlen
);
1230 unsigned int edpreg
= ioaddr
+XIRCREG_EDP
-2;
1231 for (i
=0; i
< len
; i
+= 4, p
++) {
1233 __asm__("rorl $16,%0\n\t"
1241 insw(ioaddr
+XIRCREG_EDP
, skb_put(skb
, pktlen
),
1244 skb
->protocol
= eth_type_trans(skb
, dev
);
1246 dev
->last_rx
= jiffies
;
1247 lp
->stats
.rx_packets
++;
1248 lp
->stats
.rx_bytes
+= pktlen
;
1249 if (!(rsr
& PhyPkt
))
1250 lp
->stats
.multicast
++;
1252 } else { /* bad packet */
1253 DEBUG(5, "rsr=%#02x\n", rsr
);
1255 if (rsr
& PktTooLong
) {
1256 lp
->stats
.rx_frame_errors
++;
1257 DEBUG(3, "%s: Packet too long\n", dev
->name
);
1260 lp
->stats
.rx_crc_errors
++;
1261 DEBUG(3, "%s: CRC error\n", dev
->name
);
1263 if (rsr
& AlignErr
) {
1264 lp
->stats
.rx_fifo_errors
++; /* okay ? */
1265 DEBUG(3, "%s: Alignment error\n", dev
->name
);
1268 /* clear the received/dropped/error packet */
1269 PutWord(XIRCREG0_DO
, 0x8000); /* issue cmd: skip_rx_packet */
1271 /* get the new ethernet status */
1272 eth_status
= GetByte(XIRCREG_ESR
);
1274 if (rx_status
& 0x10) { /* Receive overrun */
1275 lp
->stats
.rx_over_errors
++;
1276 PutByte(XIRCREG_CR
, ClearRxOvrun
);
1277 DEBUG(3, "receive overrun cleared\n");
1280 /***** transmit section ******/
1281 if (int_status
& PktTxed
) {
1284 n
= lp
->last_ptr_value
;
1285 nn
= GetByte(XIRCREG0_PTR
);
1286 lp
->last_ptr_value
= nn
;
1287 if (nn
< n
) /* rollover */
1288 lp
->stats
.tx_packets
+= 256 - n
;
1289 else if (n
== nn
) { /* happens sometimes - don't know why */
1290 DEBUG(0, "PTR not changed?\n");
1292 lp
->stats
.tx_packets
+= lp
->last_ptr_value
- n
;
1293 netif_wake_queue(dev
);
1295 if (tx_status
& 0x0002) { /* Execessive collissions */
1296 DEBUG(0, "tx restarted due to execssive collissions\n");
1297 PutByte(XIRCREG_CR
, RestartTx
); /* restart transmitter process */
1299 if (tx_status
& 0x0040)
1300 lp
->stats
.tx_aborted_errors
++;
1302 /* recalculate our work chunk so that we limit the duration of this
1303 * ISR to about 1/10 of a second.
1304 * Calculate only if we received a reasonable amount of bytes.
1306 if (bytes_rcvd
> 1000) {
1307 u_long duration
= jiffies
- start_ticks
;
1309 if (duration
>= HZ
/10) { /* if more than about 1/10 second */
1310 maxrx_bytes
= (bytes_rcvd
* (HZ
/10)) / duration
;
1311 if (maxrx_bytes
< 2000)
1313 else if (maxrx_bytes
> 22000)
1314 maxrx_bytes
= 22000;
1315 DEBUG(1, "set maxrx=%u (rcvd=%u ticks=%lu)\n",
1316 maxrx_bytes
, bytes_rcvd
, duration
);
1317 } else if (!duration
&& maxrx_bytes
< 22000) {
1318 /* now much faster */
1319 maxrx_bytes
+= 2000;
1320 if (maxrx_bytes
> 22000)
1321 maxrx_bytes
= 22000;
1322 DEBUG(1, "set maxrx=%u\n", maxrx_bytes
);
1328 if (int_status
!= 0xff && (int_status
= GetByte(XIRCREG_ISR
)) != 0)
1331 SelectPage(saved_page
);
1332 PutByte(XIRCREG_CR
, EnableIntr
); /* re-enable interrupts */
1333 /* Instead of dropping packets during a receive, we could
1334 * force an interrupt with this command:
1335 * PutByte(XIRCREG_CR, EnableIntr|ForceIntr);
1338 } /* xirc2ps_interrupt */
1340 /*====================================================================*/
1343 xirc2ps_tx_timeout_task(struct work_struct
*work
)
1345 local_info_t
*local
=
1346 container_of(work
, local_info_t
, tx_timeout_task
);
1347 struct net_device
*dev
= local
->dev
;
1348 /* reset the card */
1350 dev
->trans_start
= jiffies
;
1351 netif_wake_queue(dev
);
1355 xirc_tx_timeout(struct net_device
*dev
)
1357 local_info_t
*lp
= netdev_priv(dev
);
1358 lp
->stats
.tx_errors
++;
1359 printk(KERN_NOTICE
"%s: transmit timed out\n", dev
->name
);
1360 schedule_work(&lp
->tx_timeout_task
);
1364 do_start_xmit(struct sk_buff
*skb
, struct net_device
*dev
)
1366 local_info_t
*lp
= netdev_priv(dev
);
1367 unsigned int ioaddr
= dev
->base_addr
;
1370 unsigned pktlen
= skb
->len
;
1372 DEBUG(1, "do_start_xmit(skb=%p, dev=%p) len=%u\n",
1376 /* adjust the packet length to min. required
1377 * and hope that the buffer is large enough
1378 * to provide some random data.
1379 * fixme: For Mohawk we can change this by sending
1380 * a larger packetlen than we actually have; the chip will
1381 * pad this in his buffer with random bytes
1383 if (pktlen
< ETH_ZLEN
)
1385 if (skb_padto(skb
, ETH_ZLEN
))
1390 netif_stop_queue(dev
);
1392 PutWord(XIRCREG0_TRS
, (u_short
)pktlen
+2);
1393 freespace
= GetWord(XIRCREG0_TSO
);
1394 okay
= freespace
& 0x8000;
1395 freespace
&= 0x7fff;
1396 /* TRS doesn't work - (indeed it is eliminated with sil-rev 1) */
1397 okay
= pktlen
+2 < freespace
;
1398 DEBUG(2 + (okay
? 2 : 0), "%s: avail. tx space=%u%s\n",
1399 dev
->name
, freespace
, okay
? " (okay)":" (not enough)");
1400 if (!okay
) { /* not enough space */
1401 return 1; /* upper layer may decide to requeue this packet */
1403 /* send the packet */
1404 PutWord(XIRCREG_EDP
, (u_short
)pktlen
);
1405 outsw(ioaddr
+XIRCREG_EDP
, skb
->data
, pktlen
>>1);
1407 PutByte(XIRCREG_EDP
, skb
->data
[pktlen
-1]);
1410 PutByte(XIRCREG_CR
, TransmitPacket
|EnableIntr
);
1412 dev_kfree_skb (skb
);
1413 dev
->trans_start
= jiffies
;
1414 lp
->stats
.tx_bytes
+= pktlen
;
1415 netif_start_queue(dev
);
1419 static struct net_device_stats
*
1420 do_get_stats(struct net_device
*dev
)
1422 local_info_t
*lp
= netdev_priv(dev
);
1424 /* lp->stats.rx_missed_errors = GetByte(?) */
1429 * Set all addresses: This first one is the individual address,
1430 * the next 9 addresses are taken from the multicast list and
1431 * the rest is filled with the individual address.
1434 set_addresses(struct net_device
*dev
)
1436 unsigned int ioaddr
= dev
->base_addr
;
1437 local_info_t
*lp
= netdev_priv(dev
);
1438 struct dev_mc_list
*dmi
= dev
->mc_list
;
1439 unsigned char *addr
;
1443 for (i
=0,j
=8,n
=0; ; i
++, j
++) {
1448 if (n
> 1 && n
<= dev
->mc_count
&& dmi
) {
1458 if (n
&& n
<= dev
->mc_count
&& dmi
)
1459 addr
= dmi
->dmi_addr
;
1461 addr
= dev
->dev_addr
;
1464 PutByte(j
, addr
[5-i
]);
1466 PutByte(j
, addr
[i
]);
1472 * Set or clear the multicast filter for this adaptor.
1473 * We can filter up to 9 addresses, if more are requested we set
1474 * multicast promiscuous mode.
1478 set_multicast_list(struct net_device
*dev
)
1480 unsigned int ioaddr
= dev
->base_addr
;
1484 value
= GetByte(XIRCREG42_SWC1
) & 0xC0;
1486 if (dev
->flags
& IFF_PROMISC
) { /* snoop */
1487 PutByte(XIRCREG42_SWC1
, value
| 0x06); /* set MPE and PME */
1488 } else if (dev
->mc_count
> 9 || (dev
->flags
& IFF_ALLMULTI
)) {
1489 PutByte(XIRCREG42_SWC1
, value
| 0x02); /* set MPE */
1490 } else if (dev
->mc_count
) {
1491 /* the chip can filter 9 addresses perfectly */
1492 PutByte(XIRCREG42_SWC1
, value
| 0x01);
1494 PutByte(XIRCREG40_CMD0
, Offline
);
1497 PutByte(XIRCREG40_CMD0
, EnableRecv
| Online
);
1498 } else { /* standard usage */
1499 PutByte(XIRCREG42_SWC1
, value
| 0x00);
1505 do_config(struct net_device
*dev
, struct ifmap
*map
)
1507 local_info_t
*local
= netdev_priv(dev
);
1509 DEBUG(0, "do_config(%p)\n", dev
);
1510 if (map
->port
!= 255 && map
->port
!= dev
->if_port
) {
1514 local
->probe_port
= 1;
1517 local
->probe_port
= 0;
1518 dev
->if_port
= map
->port
;
1520 printk(KERN_INFO
"%s: switching to %s port\n",
1521 dev
->name
, if_names
[dev
->if_port
]);
1522 do_reset(dev
,1); /* not the fine way :-) */
1531 do_open(struct net_device
*dev
)
1533 local_info_t
*lp
= netdev_priv(dev
);
1534 struct pcmcia_device
*link
= lp
->p_dev
;
1536 DEBUG(0, "do_open(%p)\n", dev
);
1538 /* Check that the PCMCIA card is still here. */
1539 /* Physical device present signature. */
1540 if (!pcmcia_dev_present(link
))
1546 netif_start_queue(dev
);
1552 static void netdev_get_drvinfo(struct net_device
*dev
,
1553 struct ethtool_drvinfo
*info
)
1555 strcpy(info
->driver
, "xirc2ps_cs");
1556 sprintf(info
->bus_info
, "PCMCIA 0x%lx", dev
->base_addr
);
1559 static const struct ethtool_ops netdev_ethtool_ops
= {
1560 .get_drvinfo
= netdev_get_drvinfo
,
1564 do_ioctl(struct net_device
*dev
, struct ifreq
*rq
, int cmd
)
1566 local_info_t
*local
= netdev_priv(dev
);
1567 unsigned int ioaddr
= dev
->base_addr
;
1568 u16
*data
= (u16
*)&rq
->ifr_ifru
;
1570 DEBUG(1, "%s: ioctl(%-.6s, %#04x) %04x %04x %04x %04x\n",
1571 dev
->name
, rq
->ifr_ifrn
.ifrn_name
, cmd
,
1572 data
[0], data
[1], data
[2], data
[3]);
1578 case SIOCGMIIPHY
: /* Get the address of the PHY in use. */
1579 data
[0] = 0; /* we have only this address */
1581 case SIOCGMIIREG
: /* Read the specified MII register. */
1582 data
[3] = mii_rd(ioaddr
, data
[0] & 0x1f, data
[1] & 0x1f);
1584 case SIOCSMIIREG
: /* Write the specified MII register */
1585 if (!capable(CAP_NET_ADMIN
))
1587 mii_wr(ioaddr
, data
[0] & 0x1f, data
[1] & 0x1f, data
[2], 16);
1596 hardreset(struct net_device
*dev
)
1598 local_info_t
*local
= netdev_priv(dev
);
1599 unsigned int ioaddr
= dev
->base_addr
;
1603 PutByte(XIRCREG4_GPR1
, 0); /* clear bit 0: power down */
1604 msleep(40); /* wait 40 msec */
1606 PutByte(XIRCREG4_GPR1
, 1); /* set bit 0: power up */
1608 PutByte(XIRCREG4_GPR1
, 1 | 4); /* set bit 0: power up, bit 2: AIC */
1609 msleep(20); /* wait 20 msec */
1613 do_reset(struct net_device
*dev
, int full
)
1615 local_info_t
*local
= netdev_priv(dev
);
1616 unsigned int ioaddr
= dev
->base_addr
;
1619 DEBUG(0, "%s: do_reset(%p,%d)\n", dev
? dev
->name
:"eth?", dev
, full
);
1622 PutByte(XIRCREG_CR
, SoftReset
); /* set */
1623 msleep(20); /* wait 20 msec */
1624 PutByte(XIRCREG_CR
, 0); /* clear */
1625 msleep(40); /* wait 40 msec */
1626 if (local
->mohawk
) {
1628 /* set pin GP1 and GP2 to output (0x0c)
1629 * set GP1 to low to power up the ML6692 (0x00)
1630 * set GP2 to high to power up the 10Mhz chip (0x02)
1632 PutByte(XIRCREG4_GPR0
, 0x0e);
1635 /* give the circuits some time to power up */
1636 msleep(500); /* about 500ms */
1638 local
->last_ptr_value
= 0;
1639 local
->silicon
= local
->mohawk
? (GetByte(XIRCREG4_BOV
) & 0x70) >> 4
1640 : (GetByte(XIRCREG4_BOV
) & 0x30) >> 4;
1642 if (local
->probe_port
) {
1643 if (!local
->mohawk
) {
1645 PutByte(XIRCREG4_GPR0
, 4);
1646 local
->probe_port
= 0;
1648 } else if (dev
->if_port
== 2) { /* enable 10Base2 */
1650 PutByte(XIRCREG42_SWC1
, 0xC0);
1651 } else { /* enable 10BaseT */
1653 PutByte(XIRCREG42_SWC1
, 0x80);
1655 msleep(40); /* wait 40 msec to let it complete */
1660 value
= GetByte(XIRCREG_ESR
); /* read the ESR */
1661 printk(KERN_DEBUG
"%s: ESR is: %#02x\n", dev
->name
, value
);
1667 PutByte(XIRCREG1_IMR0
, 0xff); /* allow all ints */
1668 PutByte(XIRCREG1_IMR1
, 1 ); /* and Set TxUnderrunDetect */
1669 value
= GetByte(XIRCREG1_ECR
);
1672 value
|= DisableLinkPulse
;
1673 PutByte(XIRCREG1_ECR
, value
);
1675 DEBUG(0, "%s: ECR is: %#02x\n", dev
->name
, value
);
1678 PutByte(XIRCREG42_SWC0
, 0x20); /* disable source insertion */
1680 if (local
->silicon
!= 1) {
1681 /* set the local memory dividing line.
1682 * The comments in the sample code say that this is only
1683 * settable with the scipper version 2 which is revision 0.
1684 * Always for CE3 cards
1687 PutWord(XIRCREG2_RBS
, 0x2000);
1693 /* Hardware workaround:
1694 * The receive byte pointer after reset is off by 1 so we need
1695 * to move the offset pointer back to 0.
1698 PutWord(XIRCREG0_DO
, 0x2000); /* change offset command, off=0 */
1700 /* setup MAC IMRs and clear status registers */
1701 SelectPage(0x40); /* Bit 7 ... bit 0 */
1702 PutByte(XIRCREG40_RMASK0
, 0xff); /* ROK, RAB, rsv, RO, CRC, AE, PTL, MP */
1703 PutByte(XIRCREG40_TMASK0
, 0xff); /* TOK, TAB, SQE, LL, TU, JAB, EXC, CRS */
1704 PutByte(XIRCREG40_TMASK1
, 0xb0); /* rsv, rsv, PTD, EXT, rsv,rsv,rsv, rsv*/
1705 PutByte(XIRCREG40_RXST0
, 0x00); /* ROK, RAB, REN, RO, CRC, AE, PTL, MP */
1706 PutByte(XIRCREG40_TXST0
, 0x00); /* TOK, TAB, SQE, LL, TU, JAB, EXC, CRS */
1707 PutByte(XIRCREG40_TXST1
, 0x00); /* TEN, rsv, PTD, EXT, retry_counter:4 */
1709 if (full
&& local
->mohawk
&& init_mii(dev
)) {
1710 if (dev
->if_port
== 4 || local
->dingo
|| local
->new_mii
) {
1711 printk(KERN_INFO
"%s: MII selected\n", dev
->name
);
1713 PutByte(XIRCREG2_MSR
, GetByte(XIRCREG2_MSR
) | 0x08);
1716 printk(KERN_INFO
"%s: MII detected; using 10mbs\n",
1719 if (dev
->if_port
== 2) /* enable 10Base2 */
1720 PutByte(XIRCREG42_SWC1
, 0xC0);
1721 else /* enable 10BaseT */
1722 PutByte(XIRCREG42_SWC1
, 0x80);
1723 msleep(40); /* wait 40 msec to let it complete */
1726 PutByte(XIRCREG1_ECR
, GetByte(XIRCREG1_ECR
| FullDuplex
));
1727 } else { /* No MII */
1729 value
= GetByte(XIRCREG_ESR
); /* read the ESR */
1730 dev
->if_port
= (value
& MediaSelect
) ? 1 : 2;
1733 /* configure the LEDs */
1735 if (dev
->if_port
== 1 || dev
->if_port
== 4) /* TP: Link and Activity */
1736 PutByte(XIRCREG2_LED
, 0x3b);
1737 else /* Coax: Not-Collision and Activity */
1738 PutByte(XIRCREG2_LED
, 0x3a);
1741 PutByte(0x0b, 0x04); /* 100 Mbit LED */
1743 /* enable receiver and put the mac online */
1745 set_multicast_list(dev
);
1747 PutByte(XIRCREG40_CMD0
, EnableRecv
| Online
);
1750 /* setup Ethernet IMR and enable interrupts */
1752 PutByte(XIRCREG1_IMR0
, 0xff);
1755 PutByte(XIRCREG_CR
, EnableIntr
);
1756 if (local
->modem
&& !local
->dingo
) { /* do some magic */
1757 if (!(GetByte(0x10) & 0x01))
1758 PutByte(0x10, 0x11); /* unmask master-int bit */
1762 printk(KERN_INFO
"%s: media %s, silicon revision %d\n",
1763 dev
->name
, if_names
[dev
->if_port
], local
->silicon
);
1764 /* We should switch back to page 0 to avoid a bug in revision 0
1765 * where regs with offset below 8 can't be read after an access
1766 * to the MAC registers */
1771 * Initialize the Media-Independent-Interface
1772 * Returns: True if we have a good MII
1775 init_mii(struct net_device
*dev
)
1777 local_info_t
*local
= netdev_priv(dev
);
1778 unsigned int ioaddr
= dev
->base_addr
;
1779 unsigned control
, status
, linkpartner
;
1782 if (if_port
== 4 || if_port
== 1) { /* force 100BaseT or 10BaseT */
1783 dev
->if_port
= if_port
;
1784 local
->probe_port
= 0;
1788 status
= mii_rd(ioaddr
, 0, 1);
1789 if ((status
& 0xff00) != 0x7800)
1790 return 0; /* No MII */
1792 local
->new_mii
= (mii_rd(ioaddr
, 0, 2) != 0xffff);
1794 if (local
->probe_port
)
1795 control
= 0x1000; /* auto neg */
1796 else if (dev
->if_port
== 4)
1797 control
= 0x2000; /* no auto neg, 100mbs mode */
1799 control
= 0x0000; /* no auto neg, 10mbs mode */
1800 mii_wr(ioaddr
, 0, 0, control
, 16);
1802 control
= mii_rd(ioaddr
, 0, 0);
1804 if (control
& 0x0400) {
1805 printk(KERN_NOTICE
"%s can't take PHY out of isolation mode\n",
1807 local
->probe_port
= 0;
1811 if (local
->probe_port
) {
1812 /* according to the DP83840A specs the auto negotiation process
1813 * may take up to 3.5 sec, so we use this also for our ML6692
1814 * Fixme: Better to use a timer here!
1816 for (i
=0; i
< 35; i
++) {
1817 msleep(100); /* wait 100 msec */
1818 status
= mii_rd(ioaddr
, 0, 1);
1819 if ((status
& 0x0020) && (status
& 0x0004))
1823 if (!(status
& 0x0020)) {
1824 printk(KERN_INFO
"%s: autonegotiation failed;"
1825 " using 10mbs\n", dev
->name
);
1826 if (!local
->new_mii
) {
1828 mii_wr(ioaddr
, 0, 0, control
, 16);
1831 dev
->if_port
= (GetByte(XIRCREG_ESR
) & MediaSelect
) ? 1 : 2;
1834 linkpartner
= mii_rd(ioaddr
, 0, 5);
1835 printk(KERN_INFO
"%s: MII link partner: %04x\n",
1836 dev
->name
, linkpartner
);
1837 if (linkpartner
& 0x0080) {
1848 do_powerdown(struct net_device
*dev
)
1851 unsigned int ioaddr
= dev
->base_addr
;
1853 DEBUG(0, "do_powerdown(%p)\n", dev
);
1856 PutByte(XIRCREG4_GPR1
, 0); /* clear bit 0: power down */
1861 do_stop(struct net_device
*dev
)
1863 unsigned int ioaddr
= dev
->base_addr
;
1864 local_info_t
*lp
= netdev_priv(dev
);
1865 struct pcmcia_device
*link
= lp
->p_dev
;
1867 DEBUG(0, "do_stop(%p)\n", dev
);
1872 netif_stop_queue(dev
);
1875 PutByte(XIRCREG_CR
, 0); /* disable interrupts */
1877 PutByte(XIRCREG1_IMR0
, 0x00); /* forbid all ints */
1879 PutByte(XIRCREG4_GPR1
, 0); /* clear bit 0: power down */
1886 static struct pcmcia_device_id xirc2ps_ids
[] = {
1887 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0089, 0x110a),
1888 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0138, 0x110a),
1889 PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea),
1890 PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM33", 0x2e3ee845, 0x80609023),
1891 PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a),
1892 PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29),
1893 PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719),
1894 PCMCIA_PFC_DEVICE_PROD_ID12(0, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
1895 PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x010a),
1896 PCMCIA_DEVICE_PROD_ID13("Toshiba Information Systems", "TPCENET", 0x1b3b94fe, 0xf381c1a2),
1897 PCMCIA_DEVICE_PROD_ID13("Xircom", "CE3-10/100", 0x2e3ee845, 0x0ec0ac37),
1898 PCMCIA_DEVICE_PROD_ID13("Xircom", "PS-CE2-10", 0x2e3ee845, 0x947d9073),
1899 PCMCIA_DEVICE_PROD_ID13("Xircom", "R2E-100BTX", 0x2e3ee845, 0x2464a6e3),
1900 PCMCIA_DEVICE_PROD_ID13("Xircom", "RE-10", 0x2e3ee845, 0x3e08d609),
1901 PCMCIA_DEVICE_PROD_ID13("Xircom", "XE2000", 0x2e3ee845, 0xf7188e46),
1902 PCMCIA_DEVICE_PROD_ID12("Compaq", "Ethernet LAN Card", 0x54f7c49c, 0x9fd2f0a2),
1903 PCMCIA_DEVICE_PROD_ID12("Compaq", "Netelligent 10/100 PC Card", 0x54f7c49c, 0xefe96769),
1904 PCMCIA_DEVICE_PROD_ID12("Intel", "EtherExpress(TM) PRO/100 PC Card Mobile Adapter16", 0x816cc815, 0x174397db),
1905 PCMCIA_DEVICE_PROD_ID12("Toshiba", "10/100 Ethernet PC Card", 0x44a09d9c, 0xb44deecf),
1906 /* also matches CFE-10 cards! */
1907 /* PCMCIA_DEVICE_MANF_CARD(0x0105, 0x010a), */
1910 MODULE_DEVICE_TABLE(pcmcia
, xirc2ps_ids
);
1913 static struct pcmcia_driver xirc2ps_cs_driver
= {
1914 .owner
= THIS_MODULE
,
1916 .name
= "xirc2ps_cs",
1918 .probe
= xirc2ps_probe
,
1919 .remove
= xirc2ps_detach
,
1920 .id_table
= xirc2ps_ids
,
1921 .suspend
= xirc2ps_suspend
,
1922 .resume
= xirc2ps_resume
,
1926 init_xirc2ps_cs(void)
1928 return pcmcia_register_driver(&xirc2ps_cs_driver
);
1932 exit_xirc2ps_cs(void)
1934 pcmcia_unregister_driver(&xirc2ps_cs_driver
);
1937 module_init(init_xirc2ps_cs
);
1938 module_exit(exit_xirc2ps_cs
);
1941 static int __init
setup_xirc2ps_cs(char *str
)
1943 /* if_port, full_duplex, do_sound, lockup_hack
1945 int ints
[10] = { -1 };
1947 str
= get_options(str
, 9, ints
);
1949 #define MAYBE_SET(X,Y) if (ints[0] >= Y && ints[Y] != -1) { X = ints[Y]; }
1950 MAYBE_SET(if_port
, 3);
1951 MAYBE_SET(full_duplex
, 4);
1952 MAYBE_SET(do_sound
, 5);
1953 MAYBE_SET(lockup_hack
, 6);
1959 __setup("xirc2ps_cs=", setup_xirc2ps_cs
);