2 * Universal Host Controller Interface driver for USB.
4 * Maintainer: Alan Stern <stern@rowland.harvard.edu>
6 * (C) Copyright 1999 Linus Torvalds
7 * (C) Copyright 1999-2002 Johannes Erdfelt, johannes@erdfelt.com
8 * (C) Copyright 1999 Randy Dunlap
9 * (C) Copyright 1999 Georg Acher, acher@in.tum.de
10 * (C) Copyright 1999 Deti Fliegl, deti@fliegl.de
11 * (C) Copyright 1999 Thomas Sailer, sailer@ife.ee.ethz.ch
12 * (C) Copyright 1999 Roman Weissgaerber, weissg@vienna.at
13 * (C) Copyright 2000 Yggdrasil Computing, Inc. (port of new PCI interface
14 * support from usb-ohci.c by Adam Richter, adam@yggdrasil.com).
15 * (C) Copyright 1999 Gregory P. Smith (from usb-ohci.c)
16 * (C) Copyright 2004-2007 Alan Stern, stern@rowland.harvard.edu
21 * Technically, updating td->status here is a race, but it's not really a
22 * problem. The worst that can happen is that we set the IOC bit again
23 * generating a spurious interrupt. We could fix this by creating another
24 * QH and leaving the IOC bit always set, but then we would have to play
25 * games with the FSBR code to make sure we get the correct order in all
26 * the cases. I don't think it's worth the effort
28 static void uhci_set_next_interrupt(struct uhci_hcd
*uhci
)
31 mod_timer(&uhci_to_hcd(uhci
)->rh_timer
, jiffies
);
32 uhci
->term_td
->status
|= cpu_to_le32(TD_CTRL_IOC
);
35 static inline void uhci_clear_next_interrupt(struct uhci_hcd
*uhci
)
37 uhci
->term_td
->status
&= ~cpu_to_le32(TD_CTRL_IOC
);
42 * Full-Speed Bandwidth Reclamation (FSBR).
43 * We turn on FSBR whenever a queue that wants it is advancing,
44 * and leave it on for a short time thereafter.
46 static void uhci_fsbr_on(struct uhci_hcd
*uhci
)
50 /* The terminating skeleton QH always points back to the first
51 * FSBR QH. Make the last async QH point to the terminating
54 lqh
= list_entry(uhci
->skel_async_qh
->node
.prev
,
55 struct uhci_qh
, node
);
56 lqh
->link
= LINK_TO_QH(uhci
->skel_term_qh
);
59 static void uhci_fsbr_off(struct uhci_hcd
*uhci
)
63 /* Remove the link from the last async QH to the terminating
66 lqh
= list_entry(uhci
->skel_async_qh
->node
.prev
,
67 struct uhci_qh
, node
);
68 lqh
->link
= UHCI_PTR_TERM
;
71 static void uhci_add_fsbr(struct uhci_hcd
*uhci
, struct urb
*urb
)
73 struct urb_priv
*urbp
= urb
->hcpriv
;
75 if (!(urb
->transfer_flags
& URB_NO_FSBR
))
79 static void uhci_urbp_wants_fsbr(struct uhci_hcd
*uhci
, struct urb_priv
*urbp
)
82 uhci
->fsbr_is_wanted
= 1;
83 if (!uhci
->fsbr_is_on
)
85 else if (uhci
->fsbr_expiring
) {
86 uhci
->fsbr_expiring
= 0;
87 del_timer(&uhci
->fsbr_timer
);
92 static void uhci_fsbr_timeout(unsigned long _uhci
)
94 struct uhci_hcd
*uhci
= (struct uhci_hcd
*) _uhci
;
97 spin_lock_irqsave(&uhci
->lock
, flags
);
98 if (uhci
->fsbr_expiring
) {
99 uhci
->fsbr_expiring
= 0;
102 spin_unlock_irqrestore(&uhci
->lock
, flags
);
106 static struct uhci_td
*uhci_alloc_td(struct uhci_hcd
*uhci
)
108 dma_addr_t dma_handle
;
111 td
= dma_pool_alloc(uhci
->td_pool
, GFP_ATOMIC
, &dma_handle
);
115 td
->dma_handle
= dma_handle
;
118 INIT_LIST_HEAD(&td
->list
);
119 INIT_LIST_HEAD(&td
->fl_list
);
124 static void uhci_free_td(struct uhci_hcd
*uhci
, struct uhci_td
*td
)
126 if (!list_empty(&td
->list
))
127 dev_WARN(uhci_dev(uhci
), "td %p still in list!\n", td
);
128 if (!list_empty(&td
->fl_list
))
129 dev_WARN(uhci_dev(uhci
), "td %p still in fl_list!\n", td
);
131 dma_pool_free(uhci
->td_pool
, td
, td
->dma_handle
);
134 static inline void uhci_fill_td(struct uhci_td
*td
, u32 status
,
135 u32 token
, u32 buffer
)
137 td
->status
= cpu_to_le32(status
);
138 td
->token
= cpu_to_le32(token
);
139 td
->buffer
= cpu_to_le32(buffer
);
142 static void uhci_add_td_to_urbp(struct uhci_td
*td
, struct urb_priv
*urbp
)
144 list_add_tail(&td
->list
, &urbp
->td_list
);
147 static void uhci_remove_td_from_urbp(struct uhci_td
*td
)
149 list_del_init(&td
->list
);
153 * We insert Isochronous URBs directly into the frame list at the beginning
155 static inline void uhci_insert_td_in_frame_list(struct uhci_hcd
*uhci
,
156 struct uhci_td
*td
, unsigned framenum
)
158 framenum
&= (UHCI_NUMFRAMES
- 1);
160 td
->frame
= framenum
;
162 /* Is there a TD already mapped there? */
163 if (uhci
->frame_cpu
[framenum
]) {
164 struct uhci_td
*ftd
, *ltd
;
166 ftd
= uhci
->frame_cpu
[framenum
];
167 ltd
= list_entry(ftd
->fl_list
.prev
, struct uhci_td
, fl_list
);
169 list_add_tail(&td
->fl_list
, &ftd
->fl_list
);
171 td
->link
= ltd
->link
;
173 ltd
->link
= LINK_TO_TD(td
);
175 td
->link
= uhci
->frame
[framenum
];
177 uhci
->frame
[framenum
] = LINK_TO_TD(td
);
178 uhci
->frame_cpu
[framenum
] = td
;
182 static inline void uhci_remove_td_from_frame_list(struct uhci_hcd
*uhci
,
185 /* If it's not inserted, don't remove it */
186 if (td
->frame
== -1) {
187 WARN_ON(!list_empty(&td
->fl_list
));
191 if (uhci
->frame_cpu
[td
->frame
] == td
) {
192 if (list_empty(&td
->fl_list
)) {
193 uhci
->frame
[td
->frame
] = td
->link
;
194 uhci
->frame_cpu
[td
->frame
] = NULL
;
198 ntd
= list_entry(td
->fl_list
.next
, struct uhci_td
, fl_list
);
199 uhci
->frame
[td
->frame
] = LINK_TO_TD(ntd
);
200 uhci
->frame_cpu
[td
->frame
] = ntd
;
205 ptd
= list_entry(td
->fl_list
.prev
, struct uhci_td
, fl_list
);
206 ptd
->link
= td
->link
;
209 list_del_init(&td
->fl_list
);
213 static inline void uhci_remove_tds_from_frame(struct uhci_hcd
*uhci
,
214 unsigned int framenum
)
216 struct uhci_td
*ftd
, *ltd
;
218 framenum
&= (UHCI_NUMFRAMES
- 1);
220 ftd
= uhci
->frame_cpu
[framenum
];
222 ltd
= list_entry(ftd
->fl_list
.prev
, struct uhci_td
, fl_list
);
223 uhci
->frame
[framenum
] = ltd
->link
;
224 uhci
->frame_cpu
[framenum
] = NULL
;
226 while (!list_empty(&ftd
->fl_list
))
227 list_del_init(ftd
->fl_list
.prev
);
232 * Remove all the TDs for an Isochronous URB from the frame list
234 static void uhci_unlink_isochronous_tds(struct uhci_hcd
*uhci
, struct urb
*urb
)
236 struct urb_priv
*urbp
= (struct urb_priv
*) urb
->hcpriv
;
239 list_for_each_entry(td
, &urbp
->td_list
, list
)
240 uhci_remove_td_from_frame_list(uhci
, td
);
243 static struct uhci_qh
*uhci_alloc_qh(struct uhci_hcd
*uhci
,
244 struct usb_device
*udev
, struct usb_host_endpoint
*hep
)
246 dma_addr_t dma_handle
;
249 qh
= dma_pool_alloc(uhci
->qh_pool
, GFP_ATOMIC
, &dma_handle
);
253 memset(qh
, 0, sizeof(*qh
));
254 qh
->dma_handle
= dma_handle
;
256 qh
->element
= UHCI_PTR_TERM
;
257 qh
->link
= UHCI_PTR_TERM
;
259 INIT_LIST_HEAD(&qh
->queue
);
260 INIT_LIST_HEAD(&qh
->node
);
262 if (udev
) { /* Normal QH */
263 qh
->type
= usb_endpoint_type(&hep
->desc
);
264 if (qh
->type
!= USB_ENDPOINT_XFER_ISOC
) {
265 qh
->dummy_td
= uhci_alloc_td(uhci
);
267 dma_pool_free(uhci
->qh_pool
, qh
, dma_handle
);
271 qh
->state
= QH_STATE_IDLE
;
276 if (qh
->type
== USB_ENDPOINT_XFER_INT
||
277 qh
->type
== USB_ENDPOINT_XFER_ISOC
)
278 qh
->load
= usb_calc_bus_time(udev
->speed
,
279 usb_endpoint_dir_in(&hep
->desc
),
280 qh
->type
== USB_ENDPOINT_XFER_ISOC
,
281 le16_to_cpu(hep
->desc
.wMaxPacketSize
))
284 } else { /* Skeleton QH */
285 qh
->state
= QH_STATE_ACTIVE
;
291 static void uhci_free_qh(struct uhci_hcd
*uhci
, struct uhci_qh
*qh
)
293 WARN_ON(qh
->state
!= QH_STATE_IDLE
&& qh
->udev
);
294 if (!list_empty(&qh
->queue
))
295 dev_WARN(uhci_dev(uhci
), "qh %p list not empty!\n", qh
);
299 qh
->hep
->hcpriv
= NULL
;
301 uhci_free_td(uhci
, qh
->dummy_td
);
303 dma_pool_free(uhci
->qh_pool
, qh
, qh
->dma_handle
);
307 * When a queue is stopped and a dequeued URB is given back, adjust
308 * the previous TD link (if the URB isn't first on the queue) or
309 * save its toggle value (if it is first and is currently executing).
311 * Returns 0 if the URB should not yet be given back, 1 otherwise.
313 static int uhci_cleanup_queue(struct uhci_hcd
*uhci
, struct uhci_qh
*qh
,
316 struct urb_priv
*urbp
= urb
->hcpriv
;
320 /* Isochronous pipes don't use toggles and their TD link pointers
321 * get adjusted during uhci_urb_dequeue(). But since their queues
322 * cannot truly be stopped, we have to watch out for dequeues
323 * occurring after the nominal unlink frame. */
324 if (qh
->type
== USB_ENDPOINT_XFER_ISOC
) {
325 ret
= (uhci
->frame_number
+ uhci
->is_stopped
!=
330 /* If the URB isn't first on its queue, adjust the link pointer
331 * of the last TD in the previous URB. The toggle doesn't need
332 * to be saved since this URB can't be executing yet. */
333 if (qh
->queue
.next
!= &urbp
->node
) {
334 struct urb_priv
*purbp
;
337 purbp
= list_entry(urbp
->node
.prev
, struct urb_priv
, node
);
338 WARN_ON(list_empty(&purbp
->td_list
));
339 ptd
= list_entry(purbp
->td_list
.prev
, struct uhci_td
,
341 td
= list_entry(urbp
->td_list
.prev
, struct uhci_td
,
343 ptd
->link
= td
->link
;
347 /* If the QH element pointer is UHCI_PTR_TERM then then currently
348 * executing URB has already been unlinked, so this one isn't it. */
349 if (qh_element(qh
) == UHCI_PTR_TERM
)
351 qh
->element
= UHCI_PTR_TERM
;
353 /* Control pipes don't have to worry about toggles */
354 if (qh
->type
== USB_ENDPOINT_XFER_CONTROL
)
357 /* Save the next toggle value */
358 WARN_ON(list_empty(&urbp
->td_list
));
359 td
= list_entry(urbp
->td_list
.next
, struct uhci_td
, list
);
361 qh
->initial_toggle
= uhci_toggle(td_token(td
));
368 * Fix up the data toggles for URBs in a queue, when one of them
369 * terminates early (short transfer, error, or dequeued).
371 static void uhci_fixup_toggles(struct uhci_qh
*qh
, int skip_first
)
373 struct urb_priv
*urbp
= NULL
;
375 unsigned int toggle
= qh
->initial_toggle
;
378 /* Fixups for a short transfer start with the second URB in the
379 * queue (the short URB is the first). */
381 urbp
= list_entry(qh
->queue
.next
, struct urb_priv
, node
);
383 /* When starting with the first URB, if the QH element pointer is
384 * still valid then we know the URB's toggles are okay. */
385 else if (qh_element(qh
) != UHCI_PTR_TERM
)
388 /* Fix up the toggle for the URBs in the queue. Normally this
389 * loop won't run more than once: When an error or short transfer
390 * occurs, the queue usually gets emptied. */
391 urbp
= list_prepare_entry(urbp
, &qh
->queue
, node
);
392 list_for_each_entry_continue(urbp
, &qh
->queue
, node
) {
394 /* If the first TD has the right toggle value, we don't
395 * need to change any toggles in this URB */
396 td
= list_entry(urbp
->td_list
.next
, struct uhci_td
, list
);
397 if (toggle
> 1 || uhci_toggle(td_token(td
)) == toggle
) {
398 td
= list_entry(urbp
->td_list
.prev
, struct uhci_td
,
400 toggle
= uhci_toggle(td_token(td
)) ^ 1;
402 /* Otherwise all the toggles in the URB have to be switched */
404 list_for_each_entry(td
, &urbp
->td_list
, list
) {
405 td
->token
^= cpu_to_le32(
413 pipe
= list_entry(qh
->queue
.next
, struct urb_priv
, node
)->urb
->pipe
;
414 usb_settoggle(qh
->udev
, usb_pipeendpoint(pipe
),
415 usb_pipeout(pipe
), toggle
);
420 * Link an Isochronous QH into its skeleton's list
422 static inline void link_iso(struct uhci_hcd
*uhci
, struct uhci_qh
*qh
)
424 list_add_tail(&qh
->node
, &uhci
->skel_iso_qh
->node
);
426 /* Isochronous QHs aren't linked by the hardware */
430 * Link a high-period interrupt QH into the schedule at the end of its
433 static void link_interrupt(struct uhci_hcd
*uhci
, struct uhci_qh
*qh
)
437 list_add_tail(&qh
->node
, &uhci
->skelqh
[qh
->skel
]->node
);
439 pqh
= list_entry(qh
->node
.prev
, struct uhci_qh
, node
);
440 qh
->link
= pqh
->link
;
442 pqh
->link
= LINK_TO_QH(qh
);
446 * Link a period-1 interrupt or async QH into the schedule at the
447 * correct spot in the async skeleton's list, and update the FSBR link
449 static void link_async(struct uhci_hcd
*uhci
, struct uhci_qh
*qh
)
452 __le32 link_to_new_qh
;
454 /* Find the predecessor QH for our new one and insert it in the list.
455 * The list of QHs is expected to be short, so linear search won't
457 list_for_each_entry_reverse(pqh
, &uhci
->skel_async_qh
->node
, node
) {
458 if (pqh
->skel
<= qh
->skel
)
461 list_add(&qh
->node
, &pqh
->node
);
463 /* Link it into the schedule */
464 qh
->link
= pqh
->link
;
466 link_to_new_qh
= LINK_TO_QH(qh
);
467 pqh
->link
= link_to_new_qh
;
469 /* If this is now the first FSBR QH, link the terminating skeleton
471 if (pqh
->skel
< SKEL_FSBR
&& qh
->skel
>= SKEL_FSBR
)
472 uhci
->skel_term_qh
->link
= link_to_new_qh
;
476 * Put a QH on the schedule in both hardware and software
478 static void uhci_activate_qh(struct uhci_hcd
*uhci
, struct uhci_qh
*qh
)
480 WARN_ON(list_empty(&qh
->queue
));
482 /* Set the element pointer if it isn't set already.
483 * This isn't needed for Isochronous queues, but it doesn't hurt. */
484 if (qh_element(qh
) == UHCI_PTR_TERM
) {
485 struct urb_priv
*urbp
= list_entry(qh
->queue
.next
,
486 struct urb_priv
, node
);
487 struct uhci_td
*td
= list_entry(urbp
->td_list
.next
,
488 struct uhci_td
, list
);
490 qh
->element
= LINK_TO_TD(td
);
493 /* Treat the queue as if it has just advanced */
494 qh
->wait_expired
= 0;
495 qh
->advance_jiffies
= jiffies
;
497 if (qh
->state
== QH_STATE_ACTIVE
)
499 qh
->state
= QH_STATE_ACTIVE
;
501 /* Move the QH from its old list to the correct spot in the appropriate
503 if (qh
== uhci
->next_qh
)
504 uhci
->next_qh
= list_entry(qh
->node
.next
, struct uhci_qh
,
508 if (qh
->skel
== SKEL_ISO
)
510 else if (qh
->skel
< SKEL_ASYNC
)
511 link_interrupt(uhci
, qh
);
513 link_async(uhci
, qh
);
517 * Unlink a high-period interrupt QH from the schedule
519 static void unlink_interrupt(struct uhci_hcd
*uhci
, struct uhci_qh
*qh
)
523 pqh
= list_entry(qh
->node
.prev
, struct uhci_qh
, node
);
524 pqh
->link
= qh
->link
;
529 * Unlink a period-1 interrupt or async QH from the schedule
531 static void unlink_async(struct uhci_hcd
*uhci
, struct uhci_qh
*qh
)
534 __le32 link_to_next_qh
= qh
->link
;
536 pqh
= list_entry(qh
->node
.prev
, struct uhci_qh
, node
);
537 pqh
->link
= link_to_next_qh
;
539 /* If this was the old first FSBR QH, link the terminating skeleton
540 * QH to the next (new first FSBR) QH. */
541 if (pqh
->skel
< SKEL_FSBR
&& qh
->skel
>= SKEL_FSBR
)
542 uhci
->skel_term_qh
->link
= link_to_next_qh
;
547 * Take a QH off the hardware schedule
549 static void uhci_unlink_qh(struct uhci_hcd
*uhci
, struct uhci_qh
*qh
)
551 if (qh
->state
== QH_STATE_UNLINKING
)
553 WARN_ON(qh
->state
!= QH_STATE_ACTIVE
|| !qh
->udev
);
554 qh
->state
= QH_STATE_UNLINKING
;
556 /* Unlink the QH from the schedule and record when we did it */
557 if (qh
->skel
== SKEL_ISO
)
559 else if (qh
->skel
< SKEL_ASYNC
)
560 unlink_interrupt(uhci
, qh
);
562 unlink_async(uhci
, qh
);
564 uhci_get_current_frame_number(uhci
);
565 qh
->unlink_frame
= uhci
->frame_number
;
567 /* Force an interrupt so we know when the QH is fully unlinked */
568 if (list_empty(&uhci
->skel_unlink_qh
->node
))
569 uhci_set_next_interrupt(uhci
);
571 /* Move the QH from its old list to the end of the unlinking list */
572 if (qh
== uhci
->next_qh
)
573 uhci
->next_qh
= list_entry(qh
->node
.next
, struct uhci_qh
,
575 list_move_tail(&qh
->node
, &uhci
->skel_unlink_qh
->node
);
579 * When we and the controller are through with a QH, it becomes IDLE.
580 * This happens when a QH has been off the schedule (on the unlinking
581 * list) for more than one frame, or when an error occurs while adding
582 * the first URB onto a new QH.
584 static void uhci_make_qh_idle(struct uhci_hcd
*uhci
, struct uhci_qh
*qh
)
586 WARN_ON(qh
->state
== QH_STATE_ACTIVE
);
588 if (qh
== uhci
->next_qh
)
589 uhci
->next_qh
= list_entry(qh
->node
.next
, struct uhci_qh
,
591 list_move(&qh
->node
, &uhci
->idle_qh_list
);
592 qh
->state
= QH_STATE_IDLE
;
594 /* Now that the QH is idle, its post_td isn't being used */
596 uhci_free_td(uhci
, qh
->post_td
);
600 /* If anyone is waiting for a QH to become idle, wake them up */
601 if (uhci
->num_waiting
)
602 wake_up_all(&uhci
->waitqh
);
606 * Find the highest existing bandwidth load for a given phase and period.
608 static int uhci_highest_load(struct uhci_hcd
*uhci
, int phase
, int period
)
610 int highest_load
= uhci
->load
[phase
];
612 for (phase
+= period
; phase
< MAX_PHASE
; phase
+= period
)
613 highest_load
= max_t(int, highest_load
, uhci
->load
[phase
]);
618 * Set qh->phase to the optimal phase for a periodic transfer and
619 * check whether the bandwidth requirement is acceptable.
621 static int uhci_check_bandwidth(struct uhci_hcd
*uhci
, struct uhci_qh
*qh
)
625 /* Find the optimal phase (unless it is already set) and get
628 minimax_load
= uhci_highest_load(uhci
, qh
->phase
, qh
->period
);
631 int max_phase
= min_t(int, MAX_PHASE
, qh
->period
);
634 minimax_load
= uhci_highest_load(uhci
, qh
->phase
, qh
->period
);
635 for (phase
= 1; phase
< max_phase
; ++phase
) {
636 load
= uhci_highest_load(uhci
, phase
, qh
->period
);
637 if (load
< minimax_load
) {
644 /* Maximum allowable periodic bandwidth is 90%, or 900 us per frame */
645 if (minimax_load
+ qh
->load
> 900) {
646 dev_dbg(uhci_dev(uhci
), "bandwidth allocation failed: "
647 "period %d, phase %d, %d + %d us\n",
648 qh
->period
, qh
->phase
, minimax_load
, qh
->load
);
655 * Reserve a periodic QH's bandwidth in the schedule
657 static void uhci_reserve_bandwidth(struct uhci_hcd
*uhci
, struct uhci_qh
*qh
)
663 for (i
= qh
->phase
; i
< MAX_PHASE
; i
+= qh
->period
) {
664 uhci
->load
[i
] += load
;
665 uhci
->total_load
+= load
;
667 uhci_to_hcd(uhci
)->self
.bandwidth_allocated
=
668 uhci
->total_load
/ MAX_PHASE
;
670 case USB_ENDPOINT_XFER_INT
:
671 ++uhci_to_hcd(uhci
)->self
.bandwidth_int_reqs
;
674 case USB_ENDPOINT_XFER_ISOC
:
675 ++uhci_to_hcd(uhci
)->self
.bandwidth_isoc_reqs
;
679 qh
->bandwidth_reserved
= 1;
680 dev_dbg(uhci_dev(uhci
),
681 "%s dev %d ep%02x-%s, period %d, phase %d, %d us\n",
682 "reserve", qh
->udev
->devnum
,
683 qh
->hep
->desc
.bEndpointAddress
, p
,
684 qh
->period
, qh
->phase
, load
);
688 * Release a periodic QH's bandwidth reservation
690 static void uhci_release_bandwidth(struct uhci_hcd
*uhci
, struct uhci_qh
*qh
)
696 for (i
= qh
->phase
; i
< MAX_PHASE
; i
+= qh
->period
) {
697 uhci
->load
[i
] -= load
;
698 uhci
->total_load
-= load
;
700 uhci_to_hcd(uhci
)->self
.bandwidth_allocated
=
701 uhci
->total_load
/ MAX_PHASE
;
703 case USB_ENDPOINT_XFER_INT
:
704 --uhci_to_hcd(uhci
)->self
.bandwidth_int_reqs
;
707 case USB_ENDPOINT_XFER_ISOC
:
708 --uhci_to_hcd(uhci
)->self
.bandwidth_isoc_reqs
;
712 qh
->bandwidth_reserved
= 0;
713 dev_dbg(uhci_dev(uhci
),
714 "%s dev %d ep%02x-%s, period %d, phase %d, %d us\n",
715 "release", qh
->udev
->devnum
,
716 qh
->hep
->desc
.bEndpointAddress
, p
,
717 qh
->period
, qh
->phase
, load
);
720 static inline struct urb_priv
*uhci_alloc_urb_priv(struct uhci_hcd
*uhci
,
723 struct urb_priv
*urbp
;
725 urbp
= kmem_cache_zalloc(uhci_up_cachep
, GFP_ATOMIC
);
732 INIT_LIST_HEAD(&urbp
->node
);
733 INIT_LIST_HEAD(&urbp
->td_list
);
738 static void uhci_free_urb_priv(struct uhci_hcd
*uhci
,
739 struct urb_priv
*urbp
)
741 struct uhci_td
*td
, *tmp
;
743 if (!list_empty(&urbp
->node
))
744 dev_WARN(uhci_dev(uhci
), "urb %p still on QH's list!\n",
747 list_for_each_entry_safe(td
, tmp
, &urbp
->td_list
, list
) {
748 uhci_remove_td_from_urbp(td
);
749 uhci_free_td(uhci
, td
);
752 kmem_cache_free(uhci_up_cachep
, urbp
);
756 * Map status to standard result codes
758 * <status> is (td_status(td) & 0xF60000), a.k.a.
759 * uhci_status_bits(td_status(td)).
760 * Note: <status> does not include the TD_CTRL_NAK bit.
761 * <dir_out> is True for output TDs and False for input TDs.
763 static int uhci_map_status(int status
, int dir_out
)
767 if (status
& TD_CTRL_BITSTUFF
) /* Bitstuff error */
769 if (status
& TD_CTRL_CRCTIMEO
) { /* CRC/Timeout */
775 if (status
& TD_CTRL_BABBLE
) /* Babble */
777 if (status
& TD_CTRL_DBUFERR
) /* Buffer error */
779 if (status
& TD_CTRL_STALLED
) /* Stalled */
787 static int uhci_submit_control(struct uhci_hcd
*uhci
, struct urb
*urb
,
791 unsigned long destination
, status
;
792 int maxsze
= le16_to_cpu(qh
->hep
->desc
.wMaxPacketSize
);
793 int len
= urb
->transfer_buffer_length
;
794 dma_addr_t data
= urb
->transfer_dma
;
796 struct urb_priv
*urbp
= urb
->hcpriv
;
799 /* The "pipe" thing contains the destination in bits 8--18 */
800 destination
= (urb
->pipe
& PIPE_DEVEP_MASK
) | USB_PID_SETUP
;
802 /* 3 errors, dummy TD remains inactive */
803 status
= uhci_maxerr(3);
804 if (urb
->dev
->speed
== USB_SPEED_LOW
)
805 status
|= TD_CTRL_LS
;
808 * Build the TD for the control request setup packet
811 uhci_add_td_to_urbp(td
, urbp
);
812 uhci_fill_td(td
, status
, destination
| uhci_explen(8),
815 status
|= TD_CTRL_ACTIVE
;
818 * If direction is "send", change the packet ID from SETUP (0x2D)
819 * to OUT (0xE1). Else change it from SETUP to IN (0x69) and
820 * set Short Packet Detect (SPD) for all data packets.
822 * 0-length transfers always get treated as "send".
824 if (usb_pipeout(urb
->pipe
) || len
== 0)
825 destination
^= (USB_PID_SETUP
^ USB_PID_OUT
);
827 destination
^= (USB_PID_SETUP
^ USB_PID_IN
);
828 status
|= TD_CTRL_SPD
;
837 if (len
<= pktsze
) { /* The last data packet */
839 status
&= ~TD_CTRL_SPD
;
842 td
= uhci_alloc_td(uhci
);
845 *plink
= LINK_TO_TD(td
);
847 /* Alternate Data0/1 (start with Data1) */
848 destination
^= TD_TOKEN_TOGGLE
;
850 uhci_add_td_to_urbp(td
, urbp
);
851 uhci_fill_td(td
, status
, destination
| uhci_explen(pktsze
),
860 * Build the final TD for control status
862 td
= uhci_alloc_td(uhci
);
865 *plink
= LINK_TO_TD(td
);
867 /* Change direction for the status transaction */
868 destination
^= (USB_PID_IN
^ USB_PID_OUT
);
869 destination
|= TD_TOKEN_TOGGLE
; /* End in Data1 */
871 uhci_add_td_to_urbp(td
, urbp
);
872 uhci_fill_td(td
, status
| TD_CTRL_IOC
,
873 destination
| uhci_explen(0), 0);
877 * Build the new dummy TD and activate the old one
879 td
= uhci_alloc_td(uhci
);
882 *plink
= LINK_TO_TD(td
);
884 uhci_fill_td(td
, 0, USB_PID_OUT
| uhci_explen(0), 0);
886 qh
->dummy_td
->status
|= cpu_to_le32(TD_CTRL_ACTIVE
);
889 /* Low-speed transfers get a different queue, and won't hog the bus.
890 * Also, some devices enumerate better without FSBR; the easiest way
891 * to do that is to put URBs on the low-speed queue while the device
892 * isn't in the CONFIGURED state. */
893 if (urb
->dev
->speed
== USB_SPEED_LOW
||
894 urb
->dev
->state
!= USB_STATE_CONFIGURED
)
895 skel
= SKEL_LS_CONTROL
;
897 skel
= SKEL_FS_CONTROL
;
898 uhci_add_fsbr(uhci
, urb
);
900 if (qh
->state
!= QH_STATE_ACTIVE
)
905 /* Remove the dummy TD from the td_list so it doesn't get freed */
906 uhci_remove_td_from_urbp(qh
->dummy_td
);
911 * Common submit for bulk and interrupt
913 static int uhci_submit_common(struct uhci_hcd
*uhci
, struct urb
*urb
,
917 unsigned long destination
, status
;
918 int maxsze
= le16_to_cpu(qh
->hep
->desc
.wMaxPacketSize
);
919 int len
= urb
->transfer_buffer_length
;
920 dma_addr_t data
= urb
->transfer_dma
;
922 struct urb_priv
*urbp
= urb
->hcpriv
;
928 /* The "pipe" thing contains the destination in bits 8--18 */
929 destination
= (urb
->pipe
& PIPE_DEVEP_MASK
) | usb_packetid(urb
->pipe
);
930 toggle
= usb_gettoggle(urb
->dev
, usb_pipeendpoint(urb
->pipe
),
931 usb_pipeout(urb
->pipe
));
933 /* 3 errors, dummy TD remains inactive */
934 status
= uhci_maxerr(3);
935 if (urb
->dev
->speed
== USB_SPEED_LOW
)
936 status
|= TD_CTRL_LS
;
937 if (usb_pipein(urb
->pipe
))
938 status
|= TD_CTRL_SPD
;
945 do { /* Allow zero length packets */
948 if (len
<= pktsze
) { /* The last packet */
950 if (!(urb
->transfer_flags
& URB_SHORT_NOT_OK
))
951 status
&= ~TD_CTRL_SPD
;
955 td
= uhci_alloc_td(uhci
);
958 *plink
= LINK_TO_TD(td
);
960 uhci_add_td_to_urbp(td
, urbp
);
961 uhci_fill_td(td
, status
,
962 destination
| uhci_explen(pktsze
) |
963 (toggle
<< TD_TOKEN_TOGGLE_SHIFT
),
966 status
|= TD_CTRL_ACTIVE
;
974 * URB_ZERO_PACKET means adding a 0-length packet, if direction
975 * is OUT and the transfer_length was an exact multiple of maxsze,
976 * hence (len = transfer_length - N * maxsze) == 0
977 * however, if transfer_length == 0, the zero packet was already
980 if ((urb
->transfer_flags
& URB_ZERO_PACKET
) &&
981 usb_pipeout(urb
->pipe
) && len
== 0 &&
982 urb
->transfer_buffer_length
> 0) {
983 td
= uhci_alloc_td(uhci
);
986 *plink
= LINK_TO_TD(td
);
988 uhci_add_td_to_urbp(td
, urbp
);
989 uhci_fill_td(td
, status
,
990 destination
| uhci_explen(0) |
991 (toggle
<< TD_TOKEN_TOGGLE_SHIFT
),
998 /* Set the interrupt-on-completion flag on the last packet.
999 * A more-or-less typical 4 KB URB (= size of one memory page)
1000 * will require about 3 ms to transfer; that's a little on the
1001 * fast side but not enough to justify delaying an interrupt
1002 * more than 2 or 3 URBs, so we will ignore the URB_NO_INTERRUPT
1004 td
->status
|= cpu_to_le32(TD_CTRL_IOC
);
1007 * Build the new dummy TD and activate the old one
1009 td
= uhci_alloc_td(uhci
);
1012 *plink
= LINK_TO_TD(td
);
1014 uhci_fill_td(td
, 0, USB_PID_OUT
| uhci_explen(0), 0);
1016 qh
->dummy_td
->status
|= cpu_to_le32(TD_CTRL_ACTIVE
);
1019 usb_settoggle(urb
->dev
, usb_pipeendpoint(urb
->pipe
),
1020 usb_pipeout(urb
->pipe
), toggle
);
1024 /* Remove the dummy TD from the td_list so it doesn't get freed */
1025 uhci_remove_td_from_urbp(qh
->dummy_td
);
1029 static int uhci_submit_bulk(struct uhci_hcd
*uhci
, struct urb
*urb
,
1034 /* Can't have low-speed bulk transfers */
1035 if (urb
->dev
->speed
== USB_SPEED_LOW
)
1038 if (qh
->state
!= QH_STATE_ACTIVE
)
1039 qh
->skel
= SKEL_BULK
;
1040 ret
= uhci_submit_common(uhci
, urb
, qh
);
1042 uhci_add_fsbr(uhci
, urb
);
1046 static int uhci_submit_interrupt(struct uhci_hcd
*uhci
, struct urb
*urb
,
1051 /* USB 1.1 interrupt transfers only involve one packet per interval.
1052 * Drivers can submit URBs of any length, but longer ones will need
1053 * multiple intervals to complete.
1056 if (!qh
->bandwidth_reserved
) {
1059 /* Figure out which power-of-two queue to use */
1060 for (exponent
= 7; exponent
>= 0; --exponent
) {
1061 if ((1 << exponent
) <= urb
->interval
)
1067 /* If the slot is full, try a lower period */
1069 qh
->period
= 1 << exponent
;
1070 qh
->skel
= SKEL_INDEX(exponent
);
1072 /* For now, interrupt phase is fixed by the layout
1075 qh
->phase
= (qh
->period
/ 2) & (MAX_PHASE
- 1);
1076 ret
= uhci_check_bandwidth(uhci
, qh
);
1077 } while (ret
!= 0 && --exponent
>= 0);
1080 } else if (qh
->period
> urb
->interval
)
1081 return -EINVAL
; /* Can't decrease the period */
1083 ret
= uhci_submit_common(uhci
, urb
, qh
);
1085 urb
->interval
= qh
->period
;
1086 if (!qh
->bandwidth_reserved
)
1087 uhci_reserve_bandwidth(uhci
, qh
);
1093 * Fix up the data structures following a short transfer
1095 static int uhci_fixup_short_transfer(struct uhci_hcd
*uhci
,
1096 struct uhci_qh
*qh
, struct urb_priv
*urbp
)
1099 struct list_head
*tmp
;
1102 td
= list_entry(urbp
->td_list
.prev
, struct uhci_td
, list
);
1103 if (qh
->type
== USB_ENDPOINT_XFER_CONTROL
) {
1105 /* When a control transfer is short, we have to restart
1106 * the queue at the status stage transaction, which is
1108 WARN_ON(list_empty(&urbp
->td_list
));
1109 qh
->element
= LINK_TO_TD(td
);
1110 tmp
= td
->list
.prev
;
1115 /* When a bulk/interrupt transfer is short, we have to
1116 * fix up the toggles of the following URBs on the queue
1117 * before restarting the queue at the next URB. */
1118 qh
->initial_toggle
= uhci_toggle(td_token(qh
->post_td
)) ^ 1;
1119 uhci_fixup_toggles(qh
, 1);
1121 if (list_empty(&urbp
->td_list
))
1123 qh
->element
= td
->link
;
1124 tmp
= urbp
->td_list
.prev
;
1128 /* Remove all the TDs we skipped over, from tmp back to the start */
1129 while (tmp
!= &urbp
->td_list
) {
1130 td
= list_entry(tmp
, struct uhci_td
, list
);
1133 uhci_remove_td_from_urbp(td
);
1134 uhci_free_td(uhci
, td
);
1140 * Common result for control, bulk, and interrupt
1142 static int uhci_result_common(struct uhci_hcd
*uhci
, struct urb
*urb
)
1144 struct urb_priv
*urbp
= urb
->hcpriv
;
1145 struct uhci_qh
*qh
= urbp
->qh
;
1146 struct uhci_td
*td
, *tmp
;
1150 list_for_each_entry_safe(td
, tmp
, &urbp
->td_list
, list
) {
1151 unsigned int ctrlstat
;
1154 ctrlstat
= td_status(td
);
1155 status
= uhci_status_bits(ctrlstat
);
1156 if (status
& TD_CTRL_ACTIVE
)
1157 return -EINPROGRESS
;
1159 len
= uhci_actual_length(ctrlstat
);
1160 urb
->actual_length
+= len
;
1163 ret
= uhci_map_status(status
,
1164 uhci_packetout(td_token(td
)));
1165 if ((debug
== 1 && ret
!= -EPIPE
) || debug
> 1) {
1166 /* Some debugging code */
1167 dev_dbg(&urb
->dev
->dev
,
1168 "%s: failed with status %x\n",
1171 if (debug
> 1 && errbuf
) {
1172 /* Print the chain for debugging */
1173 uhci_show_qh(uhci
, urbp
->qh
, errbuf
,
1179 /* Did we receive a short packet? */
1180 } else if (len
< uhci_expected_length(td_token(td
))) {
1182 /* For control transfers, go to the status TD if
1183 * this isn't already the last data TD */
1184 if (qh
->type
== USB_ENDPOINT_XFER_CONTROL
) {
1185 if (td
->list
.next
!= urbp
->td_list
.prev
)
1189 /* For bulk and interrupt, this may be an error */
1190 else if (urb
->transfer_flags
& URB_SHORT_NOT_OK
)
1193 /* Fixup needed only if this isn't the URB's last TD */
1194 else if (&td
->list
!= urbp
->td_list
.prev
)
1198 uhci_remove_td_from_urbp(td
);
1200 uhci_free_td(uhci
, qh
->post_td
);
1210 /* Note that the queue has stopped and save
1211 * the next toggle value */
1212 qh
->element
= UHCI_PTR_TERM
;
1214 qh
->needs_fixup
= (qh
->type
!= USB_ENDPOINT_XFER_CONTROL
);
1215 qh
->initial_toggle
= uhci_toggle(td_token(td
)) ^
1216 (ret
== -EREMOTEIO
);
1218 } else /* Short packet received */
1219 ret
= uhci_fixup_short_transfer(uhci
, qh
, urbp
);
1224 * Isochronous transfers
1226 static int uhci_submit_isochronous(struct uhci_hcd
*uhci
, struct urb
*urb
,
1229 struct uhci_td
*td
= NULL
; /* Since urb->number_of_packets > 0 */
1231 unsigned long destination
, status
;
1232 struct urb_priv
*urbp
= (struct urb_priv
*) urb
->hcpriv
;
1234 /* Values must not be too big (could overflow below) */
1235 if (urb
->interval
>= UHCI_NUMFRAMES
||
1236 urb
->number_of_packets
>= UHCI_NUMFRAMES
)
1239 /* Check the period and figure out the starting frame number */
1240 if (!qh
->bandwidth_reserved
) {
1241 qh
->period
= urb
->interval
;
1242 if (urb
->transfer_flags
& URB_ISO_ASAP
) {
1243 qh
->phase
= -1; /* Find the best phase */
1244 i
= uhci_check_bandwidth(uhci
, qh
);
1248 /* Allow a little time to allocate the TDs */
1249 uhci_get_current_frame_number(uhci
);
1250 frame
= uhci
->frame_number
+ 10;
1252 /* Move forward to the first frame having the
1254 urb
->start_frame
= frame
+ ((qh
->phase
- frame
) &
1257 i
= urb
->start_frame
- uhci
->last_iso_frame
;
1258 if (i
<= 0 || i
>= UHCI_NUMFRAMES
)
1260 qh
->phase
= urb
->start_frame
& (qh
->period
- 1);
1261 i
= uhci_check_bandwidth(uhci
, qh
);
1266 } else if (qh
->period
!= urb
->interval
) {
1267 return -EINVAL
; /* Can't change the period */
1270 /* Find the next unused frame */
1271 if (list_empty(&qh
->queue
)) {
1272 frame
= qh
->iso_frame
;
1276 lurb
= list_entry(qh
->queue
.prev
,
1277 struct urb_priv
, node
)->urb
;
1278 frame
= lurb
->start_frame
+
1279 lurb
->number_of_packets
*
1282 if (urb
->transfer_flags
& URB_ISO_ASAP
) {
1283 /* Skip some frames if necessary to insure
1284 * the start frame is in the future.
1286 uhci_get_current_frame_number(uhci
);
1287 if (uhci_frame_before_eq(frame
, uhci
->frame_number
)) {
1288 frame
= uhci
->frame_number
+ 1;
1289 frame
+= ((qh
->phase
- frame
) &
1292 } /* Otherwise pick up where the last URB leaves off */
1293 urb
->start_frame
= frame
;
1296 /* Make sure we won't have to go too far into the future */
1297 if (uhci_frame_before_eq(uhci
->last_iso_frame
+ UHCI_NUMFRAMES
,
1298 urb
->start_frame
+ urb
->number_of_packets
*
1302 status
= TD_CTRL_ACTIVE
| TD_CTRL_IOS
;
1303 destination
= (urb
->pipe
& PIPE_DEVEP_MASK
) | usb_packetid(urb
->pipe
);
1305 for (i
= 0; i
< urb
->number_of_packets
; i
++) {
1306 td
= uhci_alloc_td(uhci
);
1310 uhci_add_td_to_urbp(td
, urbp
);
1311 uhci_fill_td(td
, status
, destination
|
1312 uhci_explen(urb
->iso_frame_desc
[i
].length
),
1314 urb
->iso_frame_desc
[i
].offset
);
1317 /* Set the interrupt-on-completion flag on the last packet. */
1318 td
->status
|= cpu_to_le32(TD_CTRL_IOC
);
1320 /* Add the TDs to the frame list */
1321 frame
= urb
->start_frame
;
1322 list_for_each_entry(td
, &urbp
->td_list
, list
) {
1323 uhci_insert_td_in_frame_list(uhci
, td
, frame
);
1324 frame
+= qh
->period
;
1327 if (list_empty(&qh
->queue
)) {
1328 qh
->iso_packet_desc
= &urb
->iso_frame_desc
[0];
1329 qh
->iso_frame
= urb
->start_frame
;
1332 qh
->skel
= SKEL_ISO
;
1333 if (!qh
->bandwidth_reserved
)
1334 uhci_reserve_bandwidth(uhci
, qh
);
1338 static int uhci_result_isochronous(struct uhci_hcd
*uhci
, struct urb
*urb
)
1340 struct uhci_td
*td
, *tmp
;
1341 struct urb_priv
*urbp
= urb
->hcpriv
;
1342 struct uhci_qh
*qh
= urbp
->qh
;
1344 list_for_each_entry_safe(td
, tmp
, &urbp
->td_list
, list
) {
1345 unsigned int ctrlstat
;
1349 if (uhci_frame_before_eq(uhci
->cur_iso_frame
, qh
->iso_frame
))
1350 return -EINPROGRESS
;
1352 uhci_remove_tds_from_frame(uhci
, qh
->iso_frame
);
1354 ctrlstat
= td_status(td
);
1355 if (ctrlstat
& TD_CTRL_ACTIVE
) {
1356 status
= -EXDEV
; /* TD was added too late? */
1358 status
= uhci_map_status(uhci_status_bits(ctrlstat
),
1359 usb_pipeout(urb
->pipe
));
1360 actlength
= uhci_actual_length(ctrlstat
);
1362 urb
->actual_length
+= actlength
;
1363 qh
->iso_packet_desc
->actual_length
= actlength
;
1364 qh
->iso_packet_desc
->status
= status
;
1369 uhci_remove_td_from_urbp(td
);
1370 uhci_free_td(uhci
, td
);
1371 qh
->iso_frame
+= qh
->period
;
1372 ++qh
->iso_packet_desc
;
1377 static int uhci_urb_enqueue(struct usb_hcd
*hcd
,
1378 struct urb
*urb
, gfp_t mem_flags
)
1381 struct uhci_hcd
*uhci
= hcd_to_uhci(hcd
);
1382 unsigned long flags
;
1383 struct urb_priv
*urbp
;
1386 spin_lock_irqsave(&uhci
->lock
, flags
);
1388 ret
= usb_hcd_link_urb_to_ep(hcd
, urb
);
1390 goto done_not_linked
;
1393 urbp
= uhci_alloc_urb_priv(uhci
, urb
);
1397 if (urb
->ep
->hcpriv
)
1398 qh
= urb
->ep
->hcpriv
;
1400 qh
= uhci_alloc_qh(uhci
, urb
->dev
, urb
->ep
);
1407 case USB_ENDPOINT_XFER_CONTROL
:
1408 ret
= uhci_submit_control(uhci
, urb
, qh
);
1410 case USB_ENDPOINT_XFER_BULK
:
1411 ret
= uhci_submit_bulk(uhci
, urb
, qh
);
1413 case USB_ENDPOINT_XFER_INT
:
1414 ret
= uhci_submit_interrupt(uhci
, urb
, qh
);
1416 case USB_ENDPOINT_XFER_ISOC
:
1417 urb
->error_count
= 0;
1418 ret
= uhci_submit_isochronous(uhci
, urb
, qh
);
1422 goto err_submit_failed
;
1424 /* Add this URB to the QH */
1426 list_add_tail(&urbp
->node
, &qh
->queue
);
1428 /* If the new URB is the first and only one on this QH then either
1429 * the QH is new and idle or else it's unlinked and waiting to
1430 * become idle, so we can activate it right away. But only if the
1431 * queue isn't stopped. */
1432 if (qh
->queue
.next
== &urbp
->node
&& !qh
->is_stopped
) {
1433 uhci_activate_qh(uhci
, qh
);
1434 uhci_urbp_wants_fsbr(uhci
, urbp
);
1439 if (qh
->state
== QH_STATE_IDLE
)
1440 uhci_make_qh_idle(uhci
, qh
); /* Reclaim unused QH */
1442 uhci_free_urb_priv(uhci
, urbp
);
1445 usb_hcd_unlink_urb_from_ep(hcd
, urb
);
1447 spin_unlock_irqrestore(&uhci
->lock
, flags
);
1451 static int uhci_urb_dequeue(struct usb_hcd
*hcd
, struct urb
*urb
, int status
)
1453 struct uhci_hcd
*uhci
= hcd_to_uhci(hcd
);
1454 unsigned long flags
;
1458 spin_lock_irqsave(&uhci
->lock
, flags
);
1459 rc
= usb_hcd_check_unlink_urb(hcd
, urb
, status
);
1463 qh
= ((struct urb_priv
*) urb
->hcpriv
)->qh
;
1465 /* Remove Isochronous TDs from the frame list ASAP */
1466 if (qh
->type
== USB_ENDPOINT_XFER_ISOC
) {
1467 uhci_unlink_isochronous_tds(uhci
, urb
);
1470 /* If the URB has already started, update the QH unlink time */
1471 uhci_get_current_frame_number(uhci
);
1472 if (uhci_frame_before_eq(urb
->start_frame
, uhci
->frame_number
))
1473 qh
->unlink_frame
= uhci
->frame_number
;
1476 uhci_unlink_qh(uhci
, qh
);
1479 spin_unlock_irqrestore(&uhci
->lock
, flags
);
1484 * Finish unlinking an URB and give it back
1486 static void uhci_giveback_urb(struct uhci_hcd
*uhci
, struct uhci_qh
*qh
,
1487 struct urb
*urb
, int status
)
1488 __releases(uhci
->lock
)
1489 __acquires(uhci
->lock
)
1491 struct urb_priv
*urbp
= (struct urb_priv
*) urb
->hcpriv
;
1493 if (qh
->type
== USB_ENDPOINT_XFER_CONTROL
) {
1495 /* Subtract off the length of the SETUP packet from
1496 * urb->actual_length.
1498 urb
->actual_length
-= min_t(u32
, 8, urb
->actual_length
);
1501 /* When giving back the first URB in an Isochronous queue,
1502 * reinitialize the QH's iso-related members for the next URB. */
1503 else if (qh
->type
== USB_ENDPOINT_XFER_ISOC
&&
1504 urbp
->node
.prev
== &qh
->queue
&&
1505 urbp
->node
.next
!= &qh
->queue
) {
1506 struct urb
*nurb
= list_entry(urbp
->node
.next
,
1507 struct urb_priv
, node
)->urb
;
1509 qh
->iso_packet_desc
= &nurb
->iso_frame_desc
[0];
1510 qh
->iso_frame
= nurb
->start_frame
;
1513 /* Take the URB off the QH's queue. If the queue is now empty,
1514 * this is a perfect time for a toggle fixup. */
1515 list_del_init(&urbp
->node
);
1516 if (list_empty(&qh
->queue
) && qh
->needs_fixup
) {
1517 usb_settoggle(urb
->dev
, usb_pipeendpoint(urb
->pipe
),
1518 usb_pipeout(urb
->pipe
), qh
->initial_toggle
);
1519 qh
->needs_fixup
= 0;
1522 uhci_free_urb_priv(uhci
, urbp
);
1523 usb_hcd_unlink_urb_from_ep(uhci_to_hcd(uhci
), urb
);
1525 spin_unlock(&uhci
->lock
);
1526 usb_hcd_giveback_urb(uhci_to_hcd(uhci
), urb
, status
);
1527 spin_lock(&uhci
->lock
);
1529 /* If the queue is now empty, we can unlink the QH and give up its
1530 * reserved bandwidth. */
1531 if (list_empty(&qh
->queue
)) {
1532 uhci_unlink_qh(uhci
, qh
);
1533 if (qh
->bandwidth_reserved
)
1534 uhci_release_bandwidth(uhci
, qh
);
1539 * Scan the URBs in a QH's queue
1541 #define QH_FINISHED_UNLINKING(qh) \
1542 (qh->state == QH_STATE_UNLINKING && \
1543 uhci->frame_number + uhci->is_stopped != qh->unlink_frame)
1545 static void uhci_scan_qh(struct uhci_hcd
*uhci
, struct uhci_qh
*qh
)
1547 struct urb_priv
*urbp
;
1551 while (!list_empty(&qh
->queue
)) {
1552 urbp
= list_entry(qh
->queue
.next
, struct urb_priv
, node
);
1555 if (qh
->type
== USB_ENDPOINT_XFER_ISOC
)
1556 status
= uhci_result_isochronous(uhci
, urb
);
1558 status
= uhci_result_common(uhci
, urb
);
1559 if (status
== -EINPROGRESS
)
1562 /* Dequeued but completed URBs can't be given back unless
1563 * the QH is stopped or has finished unlinking. */
1564 if (urb
->unlinked
) {
1565 if (QH_FINISHED_UNLINKING(qh
))
1567 else if (!qh
->is_stopped
)
1571 uhci_giveback_urb(uhci
, qh
, urb
, status
);
1576 /* If the QH is neither stopped nor finished unlinking (normal case),
1577 * our work here is done. */
1578 if (QH_FINISHED_UNLINKING(qh
))
1580 else if (!qh
->is_stopped
)
1583 /* Otherwise give back each of the dequeued URBs */
1585 list_for_each_entry(urbp
, &qh
->queue
, node
) {
1587 if (urb
->unlinked
) {
1589 /* Fix up the TD links and save the toggles for
1590 * non-Isochronous queues. For Isochronous queues,
1591 * test for too-recent dequeues. */
1592 if (!uhci_cleanup_queue(uhci
, qh
, urb
)) {
1596 uhci_giveback_urb(uhci
, qh
, urb
, 0);
1602 /* There are no more dequeued URBs. If there are still URBs on the
1603 * queue, the QH can now be re-activated. */
1604 if (!list_empty(&qh
->queue
)) {
1605 if (qh
->needs_fixup
)
1606 uhci_fixup_toggles(qh
, 0);
1608 /* If the first URB on the queue wants FSBR but its time
1609 * limit has expired, set the next TD to interrupt on
1610 * completion before reactivating the QH. */
1611 urbp
= list_entry(qh
->queue
.next
, struct urb_priv
, node
);
1612 if (urbp
->fsbr
&& qh
->wait_expired
) {
1613 struct uhci_td
*td
= list_entry(urbp
->td_list
.next
,
1614 struct uhci_td
, list
);
1616 td
->status
|= __cpu_to_le32(TD_CTRL_IOC
);
1619 uhci_activate_qh(uhci
, qh
);
1622 /* The queue is empty. The QH can become idle if it is fully
1624 else if (QH_FINISHED_UNLINKING(qh
))
1625 uhci_make_qh_idle(uhci
, qh
);
1629 * Check for queues that have made some forward progress.
1630 * Returns 0 if the queue is not Isochronous, is ACTIVE, and
1631 * has not advanced since last examined; 1 otherwise.
1633 * Early Intel controllers have a bug which causes qh->element sometimes
1634 * not to advance when a TD completes successfully. The queue remains
1635 * stuck on the inactive completed TD. We detect such cases and advance
1636 * the element pointer by hand.
1638 static int uhci_advance_check(struct uhci_hcd
*uhci
, struct uhci_qh
*qh
)
1640 struct urb_priv
*urbp
= NULL
;
1645 if (qh
->type
== USB_ENDPOINT_XFER_ISOC
)
1648 /* Treat an UNLINKING queue as though it hasn't advanced.
1649 * This is okay because reactivation will treat it as though
1650 * it has advanced, and if it is going to become IDLE then
1651 * this doesn't matter anyway. Furthermore it's possible
1652 * for an UNLINKING queue not to have any URBs at all, or
1653 * for its first URB not to have any TDs (if it was dequeued
1654 * just as it completed). So it's not easy in any case to
1655 * test whether such queues have advanced. */
1656 if (qh
->state
!= QH_STATE_ACTIVE
) {
1661 urbp
= list_entry(qh
->queue
.next
, struct urb_priv
, node
);
1662 td
= list_entry(urbp
->td_list
.next
, struct uhci_td
, list
);
1663 status
= td_status(td
);
1664 if (!(status
& TD_CTRL_ACTIVE
)) {
1666 /* We're okay, the queue has advanced */
1667 qh
->wait_expired
= 0;
1668 qh
->advance_jiffies
= jiffies
;
1674 /* The queue hasn't advanced; check for timeout */
1675 if (qh
->wait_expired
)
1678 if (time_after(jiffies
, qh
->advance_jiffies
+ QH_WAIT_TIMEOUT
)) {
1680 /* Detect the Intel bug and work around it */
1681 if (qh
->post_td
&& qh_element(qh
) == LINK_TO_TD(qh
->post_td
)) {
1682 qh
->element
= qh
->post_td
->link
;
1683 qh
->advance_jiffies
= jiffies
;
1688 qh
->wait_expired
= 1;
1690 /* If the current URB wants FSBR, unlink it temporarily
1691 * so that we can safely set the next TD to interrupt on
1692 * completion. That way we'll know as soon as the queue
1693 * starts moving again. */
1694 if (urbp
&& urbp
->fsbr
&& !(status
& TD_CTRL_IOC
))
1695 uhci_unlink_qh(uhci
, qh
);
1698 /* Unmoving but not-yet-expired queues keep FSBR alive */
1700 uhci_urbp_wants_fsbr(uhci
, urbp
);
1708 * Process events in the schedule, but only in one thread at a time
1710 static void uhci_scan_schedule(struct uhci_hcd
*uhci
)
1715 /* Don't allow re-entrant calls */
1716 if (uhci
->scan_in_progress
) {
1717 uhci
->need_rescan
= 1;
1720 uhci
->scan_in_progress
= 1;
1722 uhci
->need_rescan
= 0;
1723 uhci
->fsbr_is_wanted
= 0;
1725 uhci_clear_next_interrupt(uhci
);
1726 uhci_get_current_frame_number(uhci
);
1727 uhci
->cur_iso_frame
= uhci
->frame_number
;
1729 /* Go through all the QH queues and process the URBs in each one */
1730 for (i
= 0; i
< UHCI_NUM_SKELQH
- 1; ++i
) {
1731 uhci
->next_qh
= list_entry(uhci
->skelqh
[i
]->node
.next
,
1732 struct uhci_qh
, node
);
1733 while ((qh
= uhci
->next_qh
) != uhci
->skelqh
[i
]) {
1734 uhci
->next_qh
= list_entry(qh
->node
.next
,
1735 struct uhci_qh
, node
);
1737 if (uhci_advance_check(uhci
, qh
)) {
1738 uhci_scan_qh(uhci
, qh
);
1739 if (qh
->state
== QH_STATE_ACTIVE
) {
1740 uhci_urbp_wants_fsbr(uhci
,
1741 list_entry(qh
->queue
.next
, struct urb_priv
, node
));
1747 uhci
->last_iso_frame
= uhci
->cur_iso_frame
;
1748 if (uhci
->need_rescan
)
1750 uhci
->scan_in_progress
= 0;
1752 if (uhci
->fsbr_is_on
&& !uhci
->fsbr_is_wanted
&&
1753 !uhci
->fsbr_expiring
) {
1754 uhci
->fsbr_expiring
= 1;
1755 mod_timer(&uhci
->fsbr_timer
, jiffies
+ FSBR_OFF_DELAY
);
1758 if (list_empty(&uhci
->skel_unlink_qh
->node
))
1759 uhci_clear_next_interrupt(uhci
);
1761 uhci_set_next_interrupt(uhci
);