MINI2440: Added new T35 (QVGA) and Innolux 5.6" (VGA) TFTs
[linux-2.6/mini2440.git] / drivers / scsi / libfc / fc_fcp.c
blob59a4408b27b5b4d4bd3eb248e66442a9c7c98ba7
1 /*
2 * Copyright(c) 2007 Intel Corporation. All rights reserved.
3 * Copyright(c) 2008 Red Hat, Inc. All rights reserved.
4 * Copyright(c) 2008 Mike Christie
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms and conditions of the GNU General Public License,
8 * version 2, as published by the Free Software Foundation.
10 * This program is distributed in the hope it will be useful, but WITHOUT
11 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
13 * more details.
15 * You should have received a copy of the GNU General Public License along with
16 * this program; if not, write to the Free Software Foundation, Inc.,
17 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
19 * Maintained at www.Open-FCoE.org
22 #include <linux/module.h>
23 #include <linux/delay.h>
24 #include <linux/kernel.h>
25 #include <linux/types.h>
26 #include <linux/spinlock.h>
27 #include <linux/scatterlist.h>
28 #include <linux/err.h>
29 #include <linux/crc32.h>
31 #include <scsi/scsi_tcq.h>
32 #include <scsi/scsi.h>
33 #include <scsi/scsi_host.h>
34 #include <scsi/scsi_device.h>
35 #include <scsi/scsi_cmnd.h>
37 #include <scsi/fc/fc_fc2.h>
39 #include <scsi/libfc.h>
40 #include <scsi/fc_encode.h>
42 MODULE_AUTHOR("Open-FCoE.org");
43 MODULE_DESCRIPTION("libfc");
44 MODULE_LICENSE("GPL v2");
46 unsigned int fc_debug_logging;
47 module_param_named(debug_logging, fc_debug_logging, int, S_IRUGO|S_IWUSR);
48 MODULE_PARM_DESC(debug_logging, "a bit mask of logging levels");
50 static struct kmem_cache *scsi_pkt_cachep;
52 /* SRB state definitions */
53 #define FC_SRB_FREE 0 /* cmd is free */
54 #define FC_SRB_CMD_SENT (1 << 0) /* cmd has been sent */
55 #define FC_SRB_RCV_STATUS (1 << 1) /* response has arrived */
56 #define FC_SRB_ABORT_PENDING (1 << 2) /* cmd abort sent to device */
57 #define FC_SRB_ABORTED (1 << 3) /* abort acknowleged */
58 #define FC_SRB_DISCONTIG (1 << 4) /* non-sequential data recvd */
59 #define FC_SRB_COMPL (1 << 5) /* fc_io_compl has been run */
60 #define FC_SRB_FCP_PROCESSING_TMO (1 << 6) /* timer function processing */
61 #define FC_SRB_NOMEM (1 << 7) /* dropped to out of mem */
63 #define FC_SRB_READ (1 << 1)
64 #define FC_SRB_WRITE (1 << 0)
67 * The SCp.ptr should be tested and set under the host lock. NULL indicates
68 * that the command has been retruned to the scsi layer.
70 #define CMD_SP(Cmnd) ((struct fc_fcp_pkt *)(Cmnd)->SCp.ptr)
71 #define CMD_ENTRY_STATUS(Cmnd) ((Cmnd)->SCp.have_data_in)
72 #define CMD_COMPL_STATUS(Cmnd) ((Cmnd)->SCp.this_residual)
73 #define CMD_SCSI_STATUS(Cmnd) ((Cmnd)->SCp.Status)
74 #define CMD_RESID_LEN(Cmnd) ((Cmnd)->SCp.buffers_residual)
76 struct fc_fcp_internal {
77 mempool_t *scsi_pkt_pool;
78 struct list_head scsi_pkt_queue;
79 u8 throttled;
82 #define fc_get_scsi_internal(x) ((struct fc_fcp_internal *)(x)->scsi_priv)
85 * function prototypes
86 * FC scsi I/O related functions
88 static void fc_fcp_recv_data(struct fc_fcp_pkt *, struct fc_frame *);
89 static void fc_fcp_recv(struct fc_seq *, struct fc_frame *, void *);
90 static void fc_fcp_resp(struct fc_fcp_pkt *, struct fc_frame *);
91 static void fc_fcp_complete_locked(struct fc_fcp_pkt *);
92 static void fc_tm_done(struct fc_seq *, struct fc_frame *, void *);
93 static void fc_fcp_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp);
94 static void fc_timeout_error(struct fc_fcp_pkt *);
95 static void fc_fcp_timeout(unsigned long data);
96 static void fc_fcp_rec(struct fc_fcp_pkt *);
97 static void fc_fcp_rec_error(struct fc_fcp_pkt *, struct fc_frame *);
98 static void fc_fcp_rec_resp(struct fc_seq *, struct fc_frame *, void *);
99 static void fc_io_compl(struct fc_fcp_pkt *);
101 static void fc_fcp_srr(struct fc_fcp_pkt *, enum fc_rctl, u32);
102 static void fc_fcp_srr_resp(struct fc_seq *, struct fc_frame *, void *);
103 static void fc_fcp_srr_error(struct fc_fcp_pkt *, struct fc_frame *);
106 * command status codes
108 #define FC_COMPLETE 0
109 #define FC_CMD_ABORTED 1
110 #define FC_CMD_RESET 2
111 #define FC_CMD_PLOGO 3
112 #define FC_SNS_RCV 4
113 #define FC_TRANS_ERR 5
114 #define FC_DATA_OVRRUN 6
115 #define FC_DATA_UNDRUN 7
116 #define FC_ERROR 8
117 #define FC_HRD_ERROR 9
118 #define FC_CMD_TIME_OUT 10
121 * Error recovery timeout values.
123 #define FC_SCSI_ER_TIMEOUT (10 * HZ)
124 #define FC_SCSI_TM_TOV (10 * HZ)
125 #define FC_SCSI_REC_TOV (2 * HZ)
126 #define FC_HOST_RESET_TIMEOUT (30 * HZ)
128 #define FC_MAX_ERROR_CNT 5
129 #define FC_MAX_RECOV_RETRY 3
131 #define FC_FCP_DFLT_QUEUE_DEPTH 32
134 * fc_fcp_pkt_alloc - allocation routine for scsi_pkt packet
135 * @lp: fc lport struct
136 * @gfp: gfp flags for allocation
138 * This is used by upper layer scsi driver.
139 * Return Value : scsi_pkt structure or null on allocation failure.
140 * Context : call from process context. no locking required.
142 static struct fc_fcp_pkt *fc_fcp_pkt_alloc(struct fc_lport *lp, gfp_t gfp)
144 struct fc_fcp_internal *si = fc_get_scsi_internal(lp);
145 struct fc_fcp_pkt *fsp;
147 fsp = mempool_alloc(si->scsi_pkt_pool, gfp);
148 if (fsp) {
149 memset(fsp, 0, sizeof(*fsp));
150 fsp->lp = lp;
151 atomic_set(&fsp->ref_cnt, 1);
152 init_timer(&fsp->timer);
153 INIT_LIST_HEAD(&fsp->list);
154 spin_lock_init(&fsp->scsi_pkt_lock);
156 return fsp;
160 * fc_fcp_pkt_release() - release hold on scsi_pkt packet
161 * @fsp: fcp packet struct
163 * This is used by upper layer scsi driver.
164 * Context : call from process and interrupt context.
165 * no locking required
167 static void fc_fcp_pkt_release(struct fc_fcp_pkt *fsp)
169 if (atomic_dec_and_test(&fsp->ref_cnt)) {
170 struct fc_fcp_internal *si = fc_get_scsi_internal(fsp->lp);
172 mempool_free(fsp, si->scsi_pkt_pool);
176 static void fc_fcp_pkt_hold(struct fc_fcp_pkt *fsp)
178 atomic_inc(&fsp->ref_cnt);
182 * fc_fcp_pkt_destory() - release hold on scsi_pkt packet
183 * @seq: exchange sequence
184 * @fsp: fcp packet struct
186 * Release hold on scsi_pkt packet set to keep scsi_pkt
187 * till EM layer exch resource is not freed.
188 * Context : called from from EM layer.
189 * no locking required
191 static void fc_fcp_pkt_destroy(struct fc_seq *seq, void *fsp)
193 fc_fcp_pkt_release(fsp);
197 * fc_fcp_lock_pkt() - lock a packet and get a ref to it.
198 * @fsp: fcp packet
200 * We should only return error if we return a command to scsi-ml before
201 * getting a response. This can happen in cases where we send a abort, but
202 * do not wait for the response and the abort and command can be passing
203 * each other on the wire/network-layer.
205 * Note: this function locks the packet and gets a reference to allow
206 * callers to call the completion function while the lock is held and
207 * not have to worry about the packets refcount.
209 * TODO: Maybe we should just have callers grab/release the lock and
210 * have a function that they call to verify the fsp and grab a ref if
211 * needed.
213 static inline int fc_fcp_lock_pkt(struct fc_fcp_pkt *fsp)
215 spin_lock_bh(&fsp->scsi_pkt_lock);
216 if (fsp->state & FC_SRB_COMPL) {
217 spin_unlock_bh(&fsp->scsi_pkt_lock);
218 return -EPERM;
221 fc_fcp_pkt_hold(fsp);
222 return 0;
225 static inline void fc_fcp_unlock_pkt(struct fc_fcp_pkt *fsp)
227 spin_unlock_bh(&fsp->scsi_pkt_lock);
228 fc_fcp_pkt_release(fsp);
231 static void fc_fcp_timer_set(struct fc_fcp_pkt *fsp, unsigned long delay)
233 if (!(fsp->state & FC_SRB_COMPL))
234 mod_timer(&fsp->timer, jiffies + delay);
237 static int fc_fcp_send_abort(struct fc_fcp_pkt *fsp)
239 if (!fsp->seq_ptr)
240 return -EINVAL;
242 fsp->state |= FC_SRB_ABORT_PENDING;
243 return fsp->lp->tt.seq_exch_abort(fsp->seq_ptr, 0);
247 * Retry command.
248 * An abort isn't needed.
250 static void fc_fcp_retry_cmd(struct fc_fcp_pkt *fsp)
252 if (fsp->seq_ptr) {
253 fsp->lp->tt.exch_done(fsp->seq_ptr);
254 fsp->seq_ptr = NULL;
257 fsp->state &= ~FC_SRB_ABORT_PENDING;
258 fsp->io_status = 0;
259 fsp->status_code = FC_ERROR;
260 fc_fcp_complete_locked(fsp);
264 * fc_fcp_ddp_setup - calls to LLD's ddp_setup to set up DDP
265 * transfer for a read I/O indicated by the fc_fcp_pkt.
266 * @fsp: ptr to the fc_fcp_pkt
268 * This is called in exch_seq_send() when we have a newly allocated
269 * exchange with a valid exchange id to setup ddp.
271 * returns: none
273 void fc_fcp_ddp_setup(struct fc_fcp_pkt *fsp, u16 xid)
275 struct fc_lport *lp;
277 if (!fsp)
278 return;
280 lp = fsp->lp;
281 if ((fsp->req_flags & FC_SRB_READ) &&
282 (lp->lro_enabled) && (lp->tt.ddp_setup)) {
283 if (lp->tt.ddp_setup(lp, xid, scsi_sglist(fsp->cmd),
284 scsi_sg_count(fsp->cmd)))
285 fsp->xfer_ddp = xid;
288 EXPORT_SYMBOL(fc_fcp_ddp_setup);
291 * fc_fcp_ddp_done - calls to LLD's ddp_done to release any
292 * DDP related resources for this I/O if it is initialized
293 * as a ddp transfer
294 * @fsp: ptr to the fc_fcp_pkt
296 * returns: none
298 static void fc_fcp_ddp_done(struct fc_fcp_pkt *fsp)
300 struct fc_lport *lp;
302 if (!fsp)
303 return;
305 lp = fsp->lp;
306 if (fsp->xfer_ddp && lp->tt.ddp_done) {
307 fsp->xfer_len = lp->tt.ddp_done(lp, fsp->xfer_ddp);
308 fsp->xfer_ddp = 0;
314 * Receive SCSI data from target.
315 * Called after receiving solicited data.
317 static void fc_fcp_recv_data(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
319 struct scsi_cmnd *sc = fsp->cmd;
320 struct fc_lport *lp = fsp->lp;
321 struct fcoe_dev_stats *stats;
322 struct fc_frame_header *fh;
323 size_t start_offset;
324 size_t offset;
325 u32 crc;
326 u32 copy_len = 0;
327 size_t len;
328 void *buf;
329 struct scatterlist *sg;
330 size_t remaining;
332 fh = fc_frame_header_get(fp);
333 offset = ntohl(fh->fh_parm_offset);
334 start_offset = offset;
335 len = fr_len(fp) - sizeof(*fh);
336 buf = fc_frame_payload_get(fp, 0);
338 /* if this I/O is ddped, update xfer len */
339 fc_fcp_ddp_done(fsp);
341 if (offset + len > fsp->data_len) {
342 /* this should never happen */
343 if ((fr_flags(fp) & FCPHF_CRC_UNCHECKED) &&
344 fc_frame_crc_check(fp))
345 goto crc_err;
346 FC_FCP_DBG(fsp, "data received past end. len %zx offset %zx "
347 "data_len %x\n", len, offset, fsp->data_len);
348 fc_fcp_retry_cmd(fsp);
349 return;
351 if (offset != fsp->xfer_len)
352 fsp->state |= FC_SRB_DISCONTIG;
354 crc = 0;
355 if (fr_flags(fp) & FCPHF_CRC_UNCHECKED)
356 crc = crc32(~0, (u8 *) fh, sizeof(*fh));
358 sg = scsi_sglist(sc);
359 remaining = len;
361 while (remaining > 0 && sg) {
362 size_t off;
363 void *page_addr;
364 size_t sg_bytes;
366 if (offset >= sg->length) {
367 offset -= sg->length;
368 sg = sg_next(sg);
369 continue;
371 sg_bytes = min(remaining, sg->length - offset);
374 * The scatterlist item may be bigger than PAGE_SIZE,
375 * but we are limited to mapping PAGE_SIZE at a time.
377 off = offset + sg->offset;
378 sg_bytes = min(sg_bytes, (size_t)
379 (PAGE_SIZE - (off & ~PAGE_MASK)));
380 page_addr = kmap_atomic(sg_page(sg) + (off >> PAGE_SHIFT),
381 KM_SOFTIRQ0);
382 if (!page_addr)
383 break; /* XXX panic? */
385 if (fr_flags(fp) & FCPHF_CRC_UNCHECKED)
386 crc = crc32(crc, buf, sg_bytes);
387 memcpy((char *)page_addr + (off & ~PAGE_MASK), buf,
388 sg_bytes);
390 kunmap_atomic(page_addr, KM_SOFTIRQ0);
391 buf += sg_bytes;
392 offset += sg_bytes;
393 remaining -= sg_bytes;
394 copy_len += sg_bytes;
397 if (fr_flags(fp) & FCPHF_CRC_UNCHECKED) {
398 buf = fc_frame_payload_get(fp, 0);
399 if (len % 4) {
400 crc = crc32(crc, buf + len, 4 - (len % 4));
401 len += 4 - (len % 4);
404 if (~crc != le32_to_cpu(fr_crc(fp))) {
405 crc_err:
406 stats = fc_lport_get_stats(lp);
407 stats->ErrorFrames++;
408 /* FIXME - per cpu count, not total count! */
409 if (stats->InvalidCRCCount++ < 5)
410 printk(KERN_WARNING "libfc: CRC error on data "
411 "frame for port (%6x)\n",
412 fc_host_port_id(lp->host));
414 * Assume the frame is total garbage.
415 * We may have copied it over the good part
416 * of the buffer.
417 * If so, we need to retry the entire operation.
418 * Otherwise, ignore it.
420 if (fsp->state & FC_SRB_DISCONTIG)
421 fc_fcp_retry_cmd(fsp);
422 return;
426 if (fsp->xfer_contig_end == start_offset)
427 fsp->xfer_contig_end += copy_len;
428 fsp->xfer_len += copy_len;
431 * In the very rare event that this data arrived after the response
432 * and completes the transfer, call the completion handler.
434 if (unlikely(fsp->state & FC_SRB_RCV_STATUS) &&
435 fsp->xfer_len == fsp->data_len - fsp->scsi_resid)
436 fc_fcp_complete_locked(fsp);
440 * fc_fcp_send_data() - Send SCSI data to target.
441 * @fsp: ptr to fc_fcp_pkt
442 * @sp: ptr to this sequence
443 * @offset: starting offset for this data request
444 * @seq_blen: the burst length for this data request
446 * Called after receiving a Transfer Ready data descriptor.
447 * if LLD is capable of seq offload then send down seq_blen
448 * size of data in single frame, otherwise send multiple FC
449 * frames of max FC frame payload supported by target port.
451 * Returns : 0 for success.
453 static int fc_fcp_send_data(struct fc_fcp_pkt *fsp, struct fc_seq *seq,
454 size_t offset, size_t seq_blen)
456 struct fc_exch *ep;
457 struct scsi_cmnd *sc;
458 struct scatterlist *sg;
459 struct fc_frame *fp = NULL;
460 struct fc_lport *lp = fsp->lp;
461 size_t remaining;
462 size_t t_blen;
463 size_t tlen;
464 size_t sg_bytes;
465 size_t frame_offset, fh_parm_offset;
466 int error;
467 void *data = NULL;
468 void *page_addr;
469 int using_sg = lp->sg_supp;
470 u32 f_ctl;
472 WARN_ON(seq_blen <= 0);
473 if (unlikely(offset + seq_blen > fsp->data_len)) {
474 /* this should never happen */
475 FC_FCP_DBG(fsp, "xfer-ready past end. seq_blen %zx "
476 "offset %zx\n", seq_blen, offset);
477 fc_fcp_send_abort(fsp);
478 return 0;
479 } else if (offset != fsp->xfer_len) {
480 /* Out of Order Data Request - no problem, but unexpected. */
481 FC_FCP_DBG(fsp, "xfer-ready non-contiguous. "
482 "seq_blen %zx offset %zx\n", seq_blen, offset);
486 * if LLD is capable of seq_offload then set transport
487 * burst length (t_blen) to seq_blen, otherwise set t_blen
488 * to max FC frame payload previously set in fsp->max_payload.
490 t_blen = fsp->max_payload;
491 if (lp->seq_offload) {
492 t_blen = min(seq_blen, (size_t)lp->lso_max);
493 FC_FCP_DBG(fsp, "fsp=%p:lso:blen=%zx lso_max=0x%x t_blen=%zx\n",
494 fsp, seq_blen, lp->lso_max, t_blen);
497 WARN_ON(t_blen < FC_MIN_MAX_PAYLOAD);
498 if (t_blen > 512)
499 t_blen &= ~(512 - 1); /* round down to block size */
500 WARN_ON(t_blen < FC_MIN_MAX_PAYLOAD); /* won't go below 256 */
501 sc = fsp->cmd;
503 remaining = seq_blen;
504 fh_parm_offset = frame_offset = offset;
505 tlen = 0;
506 seq = lp->tt.seq_start_next(seq);
507 f_ctl = FC_FC_REL_OFF;
508 WARN_ON(!seq);
510 sg = scsi_sglist(sc);
512 while (remaining > 0 && sg) {
513 if (offset >= sg->length) {
514 offset -= sg->length;
515 sg = sg_next(sg);
516 continue;
518 if (!fp) {
519 tlen = min(t_blen, remaining);
522 * TODO. Temporary workaround. fc_seq_send() can't
523 * handle odd lengths in non-linear skbs.
524 * This will be the final fragment only.
526 if (tlen % 4)
527 using_sg = 0;
528 if (using_sg) {
529 fp = _fc_frame_alloc(lp, 0);
530 if (!fp)
531 return -ENOMEM;
532 } else {
533 fp = fc_frame_alloc(lp, tlen);
534 if (!fp)
535 return -ENOMEM;
537 data = (void *)(fr_hdr(fp)) +
538 sizeof(struct fc_frame_header);
540 fh_parm_offset = frame_offset;
541 fr_max_payload(fp) = fsp->max_payload;
543 sg_bytes = min(tlen, sg->length - offset);
544 if (using_sg) {
545 get_page(sg_page(sg));
546 skb_fill_page_desc(fp_skb(fp),
547 skb_shinfo(fp_skb(fp))->nr_frags,
548 sg_page(sg), sg->offset + offset,
549 sg_bytes);
550 fp_skb(fp)->data_len += sg_bytes;
551 fr_len(fp) += sg_bytes;
552 fp_skb(fp)->truesize += PAGE_SIZE;
553 } else {
554 size_t off = offset + sg->offset;
557 * The scatterlist item may be bigger than PAGE_SIZE,
558 * but we must not cross pages inside the kmap.
560 sg_bytes = min(sg_bytes, (size_t) (PAGE_SIZE -
561 (off & ~PAGE_MASK)));
562 page_addr = kmap_atomic(sg_page(sg) +
563 (off >> PAGE_SHIFT),
564 KM_SOFTIRQ0);
565 memcpy(data, (char *)page_addr + (off & ~PAGE_MASK),
566 sg_bytes);
567 kunmap_atomic(page_addr, KM_SOFTIRQ0);
568 data += sg_bytes;
570 offset += sg_bytes;
571 frame_offset += sg_bytes;
572 tlen -= sg_bytes;
573 remaining -= sg_bytes;
575 if (tlen)
576 continue;
579 * Send sequence with transfer sequence initiative in case
580 * this is last FCP frame of the sequence.
582 if (remaining == 0)
583 f_ctl |= FC_FC_SEQ_INIT | FC_FC_END_SEQ;
585 ep = fc_seq_exch(seq);
586 fc_fill_fc_hdr(fp, FC_RCTL_DD_SOL_DATA, ep->did, ep->sid,
587 FC_TYPE_FCP, f_ctl, fh_parm_offset);
590 * send fragment using for a sequence.
592 error = lp->tt.seq_send(lp, seq, fp);
593 if (error) {
594 WARN_ON(1); /* send error should be rare */
595 fc_fcp_retry_cmd(fsp);
596 return 0;
598 fp = NULL;
600 fsp->xfer_len += seq_blen; /* premature count? */
601 return 0;
604 static void fc_fcp_abts_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
606 int ba_done = 1;
607 struct fc_ba_rjt *brp;
608 struct fc_frame_header *fh;
610 fh = fc_frame_header_get(fp);
611 switch (fh->fh_r_ctl) {
612 case FC_RCTL_BA_ACC:
613 break;
614 case FC_RCTL_BA_RJT:
615 brp = fc_frame_payload_get(fp, sizeof(*brp));
616 if (brp && brp->br_reason == FC_BA_RJT_LOG_ERR)
617 break;
618 /* fall thru */
619 default:
621 * we will let the command timeout
622 * and scsi-ml recover in this case,
623 * therefore cleared the ba_done flag.
625 ba_done = 0;
628 if (ba_done) {
629 fsp->state |= FC_SRB_ABORTED;
630 fsp->state &= ~FC_SRB_ABORT_PENDING;
632 if (fsp->wait_for_comp)
633 complete(&fsp->tm_done);
634 else
635 fc_fcp_complete_locked(fsp);
640 * fc_fcp_reduce_can_queue() - drop can_queue
641 * @lp: lport to drop queueing for
643 * If we are getting memory allocation failures, then we may
644 * be trying to execute too many commands. We let the running
645 * commands complete or timeout, then try again with a reduced
646 * can_queue. Eventually we will hit the point where we run
647 * on all reserved structs.
649 static void fc_fcp_reduce_can_queue(struct fc_lport *lp)
651 struct fc_fcp_internal *si = fc_get_scsi_internal(lp);
652 unsigned long flags;
653 int can_queue;
655 spin_lock_irqsave(lp->host->host_lock, flags);
656 if (si->throttled)
657 goto done;
658 si->throttled = 1;
660 can_queue = lp->host->can_queue;
661 can_queue >>= 1;
662 if (!can_queue)
663 can_queue = 1;
664 lp->host->can_queue = can_queue;
665 shost_printk(KERN_ERR, lp->host, "libfc: Could not allocate frame.\n"
666 "Reducing can_queue to %d.\n", can_queue);
667 done:
668 spin_unlock_irqrestore(lp->host->host_lock, flags);
672 * fc_fcp_recv() - Reveive FCP frames
673 * @seq: The sequence the frame is on
674 * @fp: The FC frame
675 * @arg: The related FCP packet
677 * Return : None
678 * Context : called from Soft IRQ context
679 * can not called holding list lock
681 static void fc_fcp_recv(struct fc_seq *seq, struct fc_frame *fp, void *arg)
683 struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
684 struct fc_lport *lport = fsp->lp;
685 struct fc_frame_header *fh;
686 struct fcp_txrdy *dd;
687 u8 r_ctl;
688 int rc = 0;
690 if (IS_ERR(fp))
691 goto errout;
693 fh = fc_frame_header_get(fp);
694 r_ctl = fh->fh_r_ctl;
696 if (!(lport->state & LPORT_ST_READY))
697 goto out;
698 if (fc_fcp_lock_pkt(fsp))
699 goto out;
700 fsp->last_pkt_time = jiffies;
702 if (fh->fh_type == FC_TYPE_BLS) {
703 fc_fcp_abts_resp(fsp, fp);
704 goto unlock;
707 if (fsp->state & (FC_SRB_ABORTED | FC_SRB_ABORT_PENDING))
708 goto unlock;
710 if (r_ctl == FC_RCTL_DD_DATA_DESC) {
712 * received XFER RDY from the target
713 * need to send data to the target
715 WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED);
716 dd = fc_frame_payload_get(fp, sizeof(*dd));
717 WARN_ON(!dd);
719 rc = fc_fcp_send_data(fsp, seq,
720 (size_t) ntohl(dd->ft_data_ro),
721 (size_t) ntohl(dd->ft_burst_len));
722 if (!rc)
723 seq->rec_data = fsp->xfer_len;
724 else if (rc == -ENOMEM)
725 fsp->state |= FC_SRB_NOMEM;
726 } else if (r_ctl == FC_RCTL_DD_SOL_DATA) {
728 * received a DATA frame
729 * next we will copy the data to the system buffer
731 WARN_ON(fr_len(fp) < sizeof(*fh)); /* len may be 0 */
732 fc_fcp_recv_data(fsp, fp);
733 seq->rec_data = fsp->xfer_contig_end;
734 } else if (r_ctl == FC_RCTL_DD_CMD_STATUS) {
735 WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED);
737 fc_fcp_resp(fsp, fp);
738 } else {
739 FC_FCP_DBG(fsp, "unexpected frame. r_ctl %x\n", r_ctl);
741 unlock:
742 fc_fcp_unlock_pkt(fsp);
743 out:
744 fc_frame_free(fp);
745 errout:
746 if (IS_ERR(fp))
747 fc_fcp_error(fsp, fp);
748 else if (rc == -ENOMEM)
749 fc_fcp_reduce_can_queue(lport);
752 static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
754 struct fc_frame_header *fh;
755 struct fcp_resp *fc_rp;
756 struct fcp_resp_ext *rp_ex;
757 struct fcp_resp_rsp_info *fc_rp_info;
758 u32 plen;
759 u32 expected_len;
760 u32 respl = 0;
761 u32 snsl = 0;
762 u8 flags = 0;
764 plen = fr_len(fp);
765 fh = (struct fc_frame_header *)fr_hdr(fp);
766 if (unlikely(plen < sizeof(*fh) + sizeof(*fc_rp)))
767 goto len_err;
768 plen -= sizeof(*fh);
769 fc_rp = (struct fcp_resp *)(fh + 1);
770 fsp->cdb_status = fc_rp->fr_status;
771 flags = fc_rp->fr_flags;
772 fsp->scsi_comp_flags = flags;
773 expected_len = fsp->data_len;
775 /* if ddp, update xfer len */
776 fc_fcp_ddp_done(fsp);
778 if (unlikely((flags & ~FCP_CONF_REQ) || fc_rp->fr_status)) {
779 rp_ex = (void *)(fc_rp + 1);
780 if (flags & (FCP_RSP_LEN_VAL | FCP_SNS_LEN_VAL)) {
781 if (plen < sizeof(*fc_rp) + sizeof(*rp_ex))
782 goto len_err;
783 fc_rp_info = (struct fcp_resp_rsp_info *)(rp_ex + 1);
784 if (flags & FCP_RSP_LEN_VAL) {
785 respl = ntohl(rp_ex->fr_rsp_len);
786 if (respl != sizeof(*fc_rp_info))
787 goto len_err;
788 if (fsp->wait_for_comp) {
789 /* Abuse cdb_status for rsp code */
790 fsp->cdb_status = fc_rp_info->rsp_code;
791 complete(&fsp->tm_done);
793 * tmfs will not have any scsi cmd so
794 * exit here
796 return;
797 } else
798 goto err;
800 if (flags & FCP_SNS_LEN_VAL) {
801 snsl = ntohl(rp_ex->fr_sns_len);
802 if (snsl > SCSI_SENSE_BUFFERSIZE)
803 snsl = SCSI_SENSE_BUFFERSIZE;
804 memcpy(fsp->cmd->sense_buffer,
805 (char *)fc_rp_info + respl, snsl);
808 if (flags & (FCP_RESID_UNDER | FCP_RESID_OVER)) {
809 if (plen < sizeof(*fc_rp) + sizeof(rp_ex->fr_resid))
810 goto len_err;
811 if (flags & FCP_RESID_UNDER) {
812 fsp->scsi_resid = ntohl(rp_ex->fr_resid);
814 * The cmnd->underflow is the minimum number of
815 * bytes that must be transfered for this
816 * command. Provided a sense condition is not
817 * present, make sure the actual amount
818 * transferred is at least the underflow value
819 * or fail.
821 if (!(flags & FCP_SNS_LEN_VAL) &&
822 (fc_rp->fr_status == 0) &&
823 (scsi_bufflen(fsp->cmd) -
824 fsp->scsi_resid) < fsp->cmd->underflow)
825 goto err;
826 expected_len -= fsp->scsi_resid;
827 } else {
828 fsp->status_code = FC_ERROR;
832 fsp->state |= FC_SRB_RCV_STATUS;
835 * Check for missing or extra data frames.
837 if (unlikely(fsp->xfer_len != expected_len)) {
838 if (fsp->xfer_len < expected_len) {
840 * Some data may be queued locally,
841 * Wait a at least one jiffy to see if it is delivered.
842 * If this expires without data, we may do SRR.
844 fc_fcp_timer_set(fsp, 2);
845 return;
847 fsp->status_code = FC_DATA_OVRRUN;
848 FC_FCP_DBG(fsp, "tgt %6x xfer len %zx greater than expected, "
849 "len %x, data len %x\n",
850 fsp->rport->port_id,
851 fsp->xfer_len, expected_len, fsp->data_len);
853 fc_fcp_complete_locked(fsp);
854 return;
856 len_err:
857 FC_FCP_DBG(fsp, "short FCP response. flags 0x%x len %u respl %u "
858 "snsl %u\n", flags, fr_len(fp), respl, snsl);
859 err:
860 fsp->status_code = FC_ERROR;
861 fc_fcp_complete_locked(fsp);
865 * fc_fcp_complete_locked() - complete processing of a fcp packet
866 * @fsp: fcp packet
868 * This function may sleep if a timer is pending. The packet lock must be
869 * held, and the host lock must not be held.
871 static void fc_fcp_complete_locked(struct fc_fcp_pkt *fsp)
873 struct fc_lport *lp = fsp->lp;
874 struct fc_seq *seq;
875 struct fc_exch *ep;
876 u32 f_ctl;
878 if (fsp->state & FC_SRB_ABORT_PENDING)
879 return;
881 if (fsp->state & FC_SRB_ABORTED) {
882 if (!fsp->status_code)
883 fsp->status_code = FC_CMD_ABORTED;
884 } else {
886 * Test for transport underrun, independent of response
887 * underrun status.
889 if (fsp->xfer_len < fsp->data_len && !fsp->io_status &&
890 (!(fsp->scsi_comp_flags & FCP_RESID_UNDER) ||
891 fsp->xfer_len < fsp->data_len - fsp->scsi_resid)) {
892 fsp->status_code = FC_DATA_UNDRUN;
893 fsp->io_status = 0;
897 seq = fsp->seq_ptr;
898 if (seq) {
899 fsp->seq_ptr = NULL;
900 if (unlikely(fsp->scsi_comp_flags & FCP_CONF_REQ)) {
901 struct fc_frame *conf_frame;
902 struct fc_seq *csp;
904 csp = lp->tt.seq_start_next(seq);
905 conf_frame = fc_frame_alloc(fsp->lp, 0);
906 if (conf_frame) {
907 f_ctl = FC_FC_SEQ_INIT;
908 f_ctl |= FC_FC_LAST_SEQ | FC_FC_END_SEQ;
909 ep = fc_seq_exch(seq);
910 fc_fill_fc_hdr(conf_frame, FC_RCTL_DD_SOL_CTL,
911 ep->did, ep->sid,
912 FC_TYPE_FCP, f_ctl, 0);
913 lp->tt.seq_send(lp, csp, conf_frame);
916 lp->tt.exch_done(seq);
918 fc_io_compl(fsp);
921 static void fc_fcp_cleanup_cmd(struct fc_fcp_pkt *fsp, int error)
923 struct fc_lport *lp = fsp->lp;
925 if (fsp->seq_ptr) {
926 lp->tt.exch_done(fsp->seq_ptr);
927 fsp->seq_ptr = NULL;
929 fsp->status_code = error;
933 * fc_fcp_cleanup_each_cmd() - Cleanup active commads
934 * @lp: logical port
935 * @id: target id
936 * @lun: lun
937 * @error: fsp status code
939 * If lun or id is -1, they are ignored.
941 static void fc_fcp_cleanup_each_cmd(struct fc_lport *lp, unsigned int id,
942 unsigned int lun, int error)
944 struct fc_fcp_internal *si = fc_get_scsi_internal(lp);
945 struct fc_fcp_pkt *fsp;
946 struct scsi_cmnd *sc_cmd;
947 unsigned long flags;
949 spin_lock_irqsave(lp->host->host_lock, flags);
950 restart:
951 list_for_each_entry(fsp, &si->scsi_pkt_queue, list) {
952 sc_cmd = fsp->cmd;
953 if (id != -1 && scmd_id(sc_cmd) != id)
954 continue;
956 if (lun != -1 && sc_cmd->device->lun != lun)
957 continue;
959 fc_fcp_pkt_hold(fsp);
960 spin_unlock_irqrestore(lp->host->host_lock, flags);
962 if (!fc_fcp_lock_pkt(fsp)) {
963 fc_fcp_cleanup_cmd(fsp, error);
964 fc_io_compl(fsp);
965 fc_fcp_unlock_pkt(fsp);
968 fc_fcp_pkt_release(fsp);
969 spin_lock_irqsave(lp->host->host_lock, flags);
971 * while we dropped the lock multiple pkts could
972 * have been released, so we have to start over.
974 goto restart;
976 spin_unlock_irqrestore(lp->host->host_lock, flags);
979 static void fc_fcp_abort_io(struct fc_lport *lp)
981 fc_fcp_cleanup_each_cmd(lp, -1, -1, FC_HRD_ERROR);
985 * fc_fcp_pkt_send() - send a fcp packet to the lower level.
986 * @lp: fc lport
987 * @fsp: fc packet.
989 * This is called by upper layer protocol.
990 * Return : zero for success and -1 for failure
991 * Context : called from queuecommand which can be called from process
992 * or scsi soft irq.
993 * Locks : called with the host lock and irqs disabled.
995 static int fc_fcp_pkt_send(struct fc_lport *lp, struct fc_fcp_pkt *fsp)
997 struct fc_fcp_internal *si = fc_get_scsi_internal(lp);
998 int rc;
1000 fsp->cmd->SCp.ptr = (char *)fsp;
1001 fsp->cdb_cmd.fc_dl = htonl(fsp->data_len);
1002 fsp->cdb_cmd.fc_flags = fsp->req_flags & ~FCP_CFL_LEN_MASK;
1004 int_to_scsilun(fsp->cmd->device->lun,
1005 (struct scsi_lun *)fsp->cdb_cmd.fc_lun);
1006 memcpy(fsp->cdb_cmd.fc_cdb, fsp->cmd->cmnd, fsp->cmd->cmd_len);
1007 list_add_tail(&fsp->list, &si->scsi_pkt_queue);
1009 spin_unlock_irq(lp->host->host_lock);
1010 rc = lp->tt.fcp_cmd_send(lp, fsp, fc_fcp_recv);
1011 spin_lock_irq(lp->host->host_lock);
1012 if (rc)
1013 list_del(&fsp->list);
1015 return rc;
1018 static int fc_fcp_cmd_send(struct fc_lport *lp, struct fc_fcp_pkt *fsp,
1019 void (*resp)(struct fc_seq *,
1020 struct fc_frame *fp,
1021 void *arg))
1023 struct fc_frame *fp;
1024 struct fc_seq *seq;
1025 struct fc_rport *rport;
1026 struct fc_rport_libfc_priv *rp;
1027 const size_t len = sizeof(fsp->cdb_cmd);
1028 int rc = 0;
1030 if (fc_fcp_lock_pkt(fsp))
1031 return 0;
1033 fp = fc_frame_alloc(lp, sizeof(fsp->cdb_cmd));
1034 if (!fp) {
1035 rc = -1;
1036 goto unlock;
1039 memcpy(fc_frame_payload_get(fp, len), &fsp->cdb_cmd, len);
1040 fr_fsp(fp) = fsp;
1041 rport = fsp->rport;
1042 fsp->max_payload = rport->maxframe_size;
1043 rp = rport->dd_data;
1045 fc_fill_fc_hdr(fp, FC_RCTL_DD_UNSOL_CMD, rport->port_id,
1046 fc_host_port_id(rp->local_port->host), FC_TYPE_FCP,
1047 FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0);
1049 seq = lp->tt.exch_seq_send(lp, fp, resp, fc_fcp_pkt_destroy, fsp, 0);
1050 if (!seq) {
1051 fc_frame_free(fp);
1052 rc = -1;
1053 goto unlock;
1055 fsp->last_pkt_time = jiffies;
1056 fsp->seq_ptr = seq;
1057 fc_fcp_pkt_hold(fsp); /* hold for fc_fcp_pkt_destroy */
1059 setup_timer(&fsp->timer, fc_fcp_timeout, (unsigned long)fsp);
1060 fc_fcp_timer_set(fsp,
1061 (fsp->tgt_flags & FC_RP_FLAGS_REC_SUPPORTED) ?
1062 FC_SCSI_REC_TOV : FC_SCSI_ER_TIMEOUT);
1063 unlock:
1064 fc_fcp_unlock_pkt(fsp);
1065 return rc;
1069 * transport error handler
1071 static void fc_fcp_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1073 int error = PTR_ERR(fp);
1075 if (fc_fcp_lock_pkt(fsp))
1076 return;
1078 if (error == -FC_EX_CLOSED) {
1079 fc_fcp_retry_cmd(fsp);
1080 goto unlock;
1084 * clear abort pending, because the lower layer
1085 * decided to force completion.
1087 fsp->state &= ~FC_SRB_ABORT_PENDING;
1088 fsp->status_code = FC_CMD_PLOGO;
1089 fc_fcp_complete_locked(fsp);
1090 unlock:
1091 fc_fcp_unlock_pkt(fsp);
1095 * Scsi abort handler- calls to send an abort
1096 * and then wait for abort completion
1098 static int fc_fcp_pkt_abort(struct fc_lport *lp, struct fc_fcp_pkt *fsp)
1100 int rc = FAILED;
1102 if (fc_fcp_send_abort(fsp))
1103 return FAILED;
1105 init_completion(&fsp->tm_done);
1106 fsp->wait_for_comp = 1;
1108 spin_unlock_bh(&fsp->scsi_pkt_lock);
1109 rc = wait_for_completion_timeout(&fsp->tm_done, FC_SCSI_TM_TOV);
1110 spin_lock_bh(&fsp->scsi_pkt_lock);
1111 fsp->wait_for_comp = 0;
1113 if (!rc) {
1114 FC_FCP_DBG(fsp, "target abort cmd failed\n");
1115 rc = FAILED;
1116 } else if (fsp->state & FC_SRB_ABORTED) {
1117 FC_FCP_DBG(fsp, "target abort cmd passed\n");
1118 rc = SUCCESS;
1119 fc_fcp_complete_locked(fsp);
1122 return rc;
1126 * Retry LUN reset after resource allocation failed.
1128 static void fc_lun_reset_send(unsigned long data)
1130 struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data;
1131 struct fc_lport *lp = fsp->lp;
1132 if (lp->tt.fcp_cmd_send(lp, fsp, fc_tm_done)) {
1133 if (fsp->recov_retry++ >= FC_MAX_RECOV_RETRY)
1134 return;
1135 if (fc_fcp_lock_pkt(fsp))
1136 return;
1137 setup_timer(&fsp->timer, fc_lun_reset_send, (unsigned long)fsp);
1138 fc_fcp_timer_set(fsp, FC_SCSI_REC_TOV);
1139 fc_fcp_unlock_pkt(fsp);
1144 * Scsi device reset handler- send a LUN RESET to the device
1145 * and wait for reset reply
1147 static int fc_lun_reset(struct fc_lport *lp, struct fc_fcp_pkt *fsp,
1148 unsigned int id, unsigned int lun)
1150 int rc;
1152 fsp->cdb_cmd.fc_dl = htonl(fsp->data_len);
1153 fsp->cdb_cmd.fc_tm_flags = FCP_TMF_LUN_RESET;
1154 int_to_scsilun(lun, (struct scsi_lun *)fsp->cdb_cmd.fc_lun);
1156 fsp->wait_for_comp = 1;
1157 init_completion(&fsp->tm_done);
1159 fc_lun_reset_send((unsigned long)fsp);
1162 * wait for completion of reset
1163 * after that make sure all commands are terminated
1165 rc = wait_for_completion_timeout(&fsp->tm_done, FC_SCSI_TM_TOV);
1167 spin_lock_bh(&fsp->scsi_pkt_lock);
1168 fsp->state |= FC_SRB_COMPL;
1169 spin_unlock_bh(&fsp->scsi_pkt_lock);
1171 del_timer_sync(&fsp->timer);
1173 spin_lock_bh(&fsp->scsi_pkt_lock);
1174 if (fsp->seq_ptr) {
1175 lp->tt.exch_done(fsp->seq_ptr);
1176 fsp->seq_ptr = NULL;
1178 fsp->wait_for_comp = 0;
1179 spin_unlock_bh(&fsp->scsi_pkt_lock);
1181 if (!rc) {
1182 FC_SCSI_DBG(lp, "lun reset failed\n");
1183 return FAILED;
1186 /* cdb_status holds the tmf's rsp code */
1187 if (fsp->cdb_status != FCP_TMF_CMPL)
1188 return FAILED;
1190 FC_SCSI_DBG(lp, "lun reset to lun %u completed\n", lun);
1191 fc_fcp_cleanup_each_cmd(lp, id, lun, FC_CMD_ABORTED);
1192 return SUCCESS;
1196 * Task Managment response handler
1198 static void fc_tm_done(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1200 struct fc_fcp_pkt *fsp = arg;
1201 struct fc_frame_header *fh;
1203 if (IS_ERR(fp)) {
1205 * If there is an error just let it timeout or wait
1206 * for TMF to be aborted if it timedout.
1208 * scsi-eh will escalate for when either happens.
1210 return;
1213 if (fc_fcp_lock_pkt(fsp))
1214 return;
1217 * raced with eh timeout handler.
1219 if (!fsp->seq_ptr || !fsp->wait_for_comp) {
1220 spin_unlock_bh(&fsp->scsi_pkt_lock);
1221 return;
1224 fh = fc_frame_header_get(fp);
1225 if (fh->fh_type != FC_TYPE_BLS)
1226 fc_fcp_resp(fsp, fp);
1227 fsp->seq_ptr = NULL;
1228 fsp->lp->tt.exch_done(seq);
1229 fc_frame_free(fp);
1230 fc_fcp_unlock_pkt(fsp);
1233 static void fc_fcp_cleanup(struct fc_lport *lp)
1235 fc_fcp_cleanup_each_cmd(lp, -1, -1, FC_ERROR);
1239 * fc_fcp_timeout: called by OS timer function.
1241 * The timer has been inactivated and must be reactivated if desired
1242 * using fc_fcp_timer_set().
1244 * Algorithm:
1246 * If REC is supported, just issue it, and return. The REC exchange will
1247 * complete or time out, and recovery can continue at that point.
1249 * Otherwise, if the response has been received without all the data,
1250 * it has been ER_TIMEOUT since the response was received.
1252 * If the response has not been received,
1253 * we see if data was received recently. If it has been, we continue waiting,
1254 * otherwise, we abort the command.
1256 static void fc_fcp_timeout(unsigned long data)
1258 struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data;
1259 struct fc_rport *rport = fsp->rport;
1260 struct fc_rport_libfc_priv *rp = rport->dd_data;
1262 if (fc_fcp_lock_pkt(fsp))
1263 return;
1265 if (fsp->cdb_cmd.fc_tm_flags)
1266 goto unlock;
1268 fsp->state |= FC_SRB_FCP_PROCESSING_TMO;
1270 if (rp->flags & FC_RP_FLAGS_REC_SUPPORTED)
1271 fc_fcp_rec(fsp);
1272 else if (time_after_eq(fsp->last_pkt_time + (FC_SCSI_ER_TIMEOUT / 2),
1273 jiffies))
1274 fc_fcp_timer_set(fsp, FC_SCSI_ER_TIMEOUT);
1275 else if (fsp->state & FC_SRB_RCV_STATUS)
1276 fc_fcp_complete_locked(fsp);
1277 else
1278 fc_timeout_error(fsp);
1279 fsp->state &= ~FC_SRB_FCP_PROCESSING_TMO;
1280 unlock:
1281 fc_fcp_unlock_pkt(fsp);
1285 * Send a REC ELS request
1287 static void fc_fcp_rec(struct fc_fcp_pkt *fsp)
1289 struct fc_lport *lp;
1290 struct fc_frame *fp;
1291 struct fc_rport *rport;
1292 struct fc_rport_libfc_priv *rp;
1294 lp = fsp->lp;
1295 rport = fsp->rport;
1296 rp = rport->dd_data;
1297 if (!fsp->seq_ptr || rp->rp_state != RPORT_ST_READY) {
1298 fsp->status_code = FC_HRD_ERROR;
1299 fsp->io_status = 0;
1300 fc_fcp_complete_locked(fsp);
1301 return;
1303 fp = fc_frame_alloc(lp, sizeof(struct fc_els_rec));
1304 if (!fp)
1305 goto retry;
1307 fr_seq(fp) = fsp->seq_ptr;
1308 fc_fill_fc_hdr(fp, FC_RCTL_ELS_REQ, rport->port_id,
1309 fc_host_port_id(rp->local_port->host), FC_TYPE_ELS,
1310 FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0);
1311 if (lp->tt.elsct_send(lp, rport->port_id, fp, ELS_REC, fc_fcp_rec_resp,
1312 fsp, jiffies_to_msecs(FC_SCSI_REC_TOV))) {
1313 fc_fcp_pkt_hold(fsp); /* hold while REC outstanding */
1314 return;
1316 fc_frame_free(fp);
1317 retry:
1318 if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1319 fc_fcp_timer_set(fsp, FC_SCSI_REC_TOV);
1320 else
1321 fc_timeout_error(fsp);
1325 * Receive handler for REC ELS frame
1326 * if it is a reject then let the scsi layer to handle
1327 * the timeout. if it is a LS_ACC then if the io was not completed
1328 * then set the timeout and return otherwise complete the exchange
1329 * and tell the scsi layer to restart the I/O.
1331 static void fc_fcp_rec_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1333 struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
1334 struct fc_els_rec_acc *recp;
1335 struct fc_els_ls_rjt *rjt;
1336 u32 e_stat;
1337 u8 opcode;
1338 u32 offset;
1339 enum dma_data_direction data_dir;
1340 enum fc_rctl r_ctl;
1341 struct fc_rport_libfc_priv *rp;
1343 if (IS_ERR(fp)) {
1344 fc_fcp_rec_error(fsp, fp);
1345 return;
1348 if (fc_fcp_lock_pkt(fsp))
1349 goto out;
1351 fsp->recov_retry = 0;
1352 opcode = fc_frame_payload_op(fp);
1353 if (opcode == ELS_LS_RJT) {
1354 rjt = fc_frame_payload_get(fp, sizeof(*rjt));
1355 switch (rjt->er_reason) {
1356 default:
1357 FC_FCP_DBG(fsp, "device %x unexpected REC reject "
1358 "reason %d expl %d\n",
1359 fsp->rport->port_id, rjt->er_reason,
1360 rjt->er_explan);
1361 /* fall through */
1362 case ELS_RJT_UNSUP:
1363 FC_FCP_DBG(fsp, "device does not support REC\n");
1364 rp = fsp->rport->dd_data;
1366 * if we do not spport RECs or got some bogus
1367 * reason then resetup timer so we check for
1368 * making progress.
1370 rp->flags &= ~FC_RP_FLAGS_REC_SUPPORTED;
1371 fc_fcp_timer_set(fsp, FC_SCSI_ER_TIMEOUT);
1372 break;
1373 case ELS_RJT_LOGIC:
1374 case ELS_RJT_UNAB:
1376 * If no data transfer, the command frame got dropped
1377 * so we just retry. If data was transferred, we
1378 * lost the response but the target has no record,
1379 * so we abort and retry.
1381 if (rjt->er_explan == ELS_EXPL_OXID_RXID &&
1382 fsp->xfer_len == 0) {
1383 fc_fcp_retry_cmd(fsp);
1384 break;
1386 fc_timeout_error(fsp);
1387 break;
1389 } else if (opcode == ELS_LS_ACC) {
1390 if (fsp->state & FC_SRB_ABORTED)
1391 goto unlock_out;
1393 data_dir = fsp->cmd->sc_data_direction;
1394 recp = fc_frame_payload_get(fp, sizeof(*recp));
1395 offset = ntohl(recp->reca_fc4value);
1396 e_stat = ntohl(recp->reca_e_stat);
1398 if (e_stat & ESB_ST_COMPLETE) {
1401 * The exchange is complete.
1403 * For output, we must've lost the response.
1404 * For input, all data must've been sent.
1405 * We lost may have lost the response
1406 * (and a confirmation was requested) and maybe
1407 * some data.
1409 * If all data received, send SRR
1410 * asking for response. If partial data received,
1411 * or gaps, SRR requests data at start of gap.
1412 * Recovery via SRR relies on in-order-delivery.
1414 if (data_dir == DMA_TO_DEVICE) {
1415 r_ctl = FC_RCTL_DD_CMD_STATUS;
1416 } else if (fsp->xfer_contig_end == offset) {
1417 r_ctl = FC_RCTL_DD_CMD_STATUS;
1418 } else {
1419 offset = fsp->xfer_contig_end;
1420 r_ctl = FC_RCTL_DD_SOL_DATA;
1422 fc_fcp_srr(fsp, r_ctl, offset);
1423 } else if (e_stat & ESB_ST_SEQ_INIT) {
1426 * The remote port has the initiative, so just
1427 * keep waiting for it to complete.
1429 fc_fcp_timer_set(fsp, FC_SCSI_REC_TOV);
1430 } else {
1433 * The exchange is incomplete, we have seq. initiative.
1434 * Lost response with requested confirmation,
1435 * lost confirmation, lost transfer ready or
1436 * lost write data.
1438 * For output, if not all data was received, ask
1439 * for transfer ready to be repeated.
1441 * If we received or sent all the data, send SRR to
1442 * request response.
1444 * If we lost a response, we may have lost some read
1445 * data as well.
1447 r_ctl = FC_RCTL_DD_SOL_DATA;
1448 if (data_dir == DMA_TO_DEVICE) {
1449 r_ctl = FC_RCTL_DD_CMD_STATUS;
1450 if (offset < fsp->data_len)
1451 r_ctl = FC_RCTL_DD_DATA_DESC;
1452 } else if (offset == fsp->xfer_contig_end) {
1453 r_ctl = FC_RCTL_DD_CMD_STATUS;
1454 } else if (fsp->xfer_contig_end < offset) {
1455 offset = fsp->xfer_contig_end;
1457 fc_fcp_srr(fsp, r_ctl, offset);
1460 unlock_out:
1461 fc_fcp_unlock_pkt(fsp);
1462 out:
1463 fc_fcp_pkt_release(fsp); /* drop hold for outstanding REC */
1464 fc_frame_free(fp);
1468 * Handle error response or timeout for REC exchange.
1470 static void fc_fcp_rec_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1472 int error = PTR_ERR(fp);
1474 if (fc_fcp_lock_pkt(fsp))
1475 goto out;
1477 switch (error) {
1478 case -FC_EX_CLOSED:
1479 fc_fcp_retry_cmd(fsp);
1480 break;
1482 default:
1483 FC_FCP_DBG(fsp, "REC %p fid %x error unexpected error %d\n",
1484 fsp, fsp->rport->port_id, error);
1485 fsp->status_code = FC_CMD_PLOGO;
1486 /* fall through */
1488 case -FC_EX_TIMEOUT:
1490 * Assume REC or LS_ACC was lost.
1491 * The exchange manager will have aborted REC, so retry.
1493 FC_FCP_DBG(fsp, "REC fid %x error error %d retry %d/%d\n",
1494 fsp->rport->port_id, error, fsp->recov_retry,
1495 FC_MAX_RECOV_RETRY);
1496 if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1497 fc_fcp_rec(fsp);
1498 else
1499 fc_timeout_error(fsp);
1500 break;
1502 fc_fcp_unlock_pkt(fsp);
1503 out:
1504 fc_fcp_pkt_release(fsp); /* drop hold for outstanding REC */
1508 * Time out error routine:
1509 * abort's the I/O close the exchange and
1510 * send completion notification to scsi layer
1512 static void fc_timeout_error(struct fc_fcp_pkt *fsp)
1514 fsp->status_code = FC_CMD_TIME_OUT;
1515 fsp->cdb_status = 0;
1516 fsp->io_status = 0;
1518 * if this fails then we let the scsi command timer fire and
1519 * scsi-ml escalate.
1521 fc_fcp_send_abort(fsp);
1525 * Sequence retransmission request.
1526 * This is called after receiving status but insufficient data, or
1527 * when expecting status but the request has timed out.
1529 static void fc_fcp_srr(struct fc_fcp_pkt *fsp, enum fc_rctl r_ctl, u32 offset)
1531 struct fc_lport *lp = fsp->lp;
1532 struct fc_rport *rport;
1533 struct fc_rport_libfc_priv *rp;
1534 struct fc_exch *ep = fc_seq_exch(fsp->seq_ptr);
1535 struct fc_seq *seq;
1536 struct fcp_srr *srr;
1537 struct fc_frame *fp;
1538 u8 cdb_op;
1540 rport = fsp->rport;
1541 rp = rport->dd_data;
1542 cdb_op = fsp->cdb_cmd.fc_cdb[0];
1544 if (!(rp->flags & FC_RP_FLAGS_RETRY) || rp->rp_state != RPORT_ST_READY)
1545 goto retry; /* shouldn't happen */
1546 fp = fc_frame_alloc(lp, sizeof(*srr));
1547 if (!fp)
1548 goto retry;
1550 srr = fc_frame_payload_get(fp, sizeof(*srr));
1551 memset(srr, 0, sizeof(*srr));
1552 srr->srr_op = ELS_SRR;
1553 srr->srr_ox_id = htons(ep->oxid);
1554 srr->srr_rx_id = htons(ep->rxid);
1555 srr->srr_r_ctl = r_ctl;
1556 srr->srr_rel_off = htonl(offset);
1558 fc_fill_fc_hdr(fp, FC_RCTL_ELS4_REQ, rport->port_id,
1559 fc_host_port_id(rp->local_port->host), FC_TYPE_FCP,
1560 FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0);
1562 seq = lp->tt.exch_seq_send(lp, fp, fc_fcp_srr_resp, NULL,
1563 fsp, jiffies_to_msecs(FC_SCSI_REC_TOV));
1564 if (!seq) {
1565 fc_frame_free(fp);
1566 goto retry;
1568 fsp->recov_seq = seq;
1569 fsp->xfer_len = offset;
1570 fsp->xfer_contig_end = offset;
1571 fsp->state &= ~FC_SRB_RCV_STATUS;
1572 fc_fcp_pkt_hold(fsp); /* hold for outstanding SRR */
1573 return;
1574 retry:
1575 fc_fcp_retry_cmd(fsp);
1579 * Handle response from SRR.
1581 static void fc_fcp_srr_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1583 struct fc_fcp_pkt *fsp = arg;
1584 struct fc_frame_header *fh;
1586 if (IS_ERR(fp)) {
1587 fc_fcp_srr_error(fsp, fp);
1588 return;
1591 if (fc_fcp_lock_pkt(fsp))
1592 goto out;
1594 fh = fc_frame_header_get(fp);
1596 * BUG? fc_fcp_srr_error calls exch_done which would release
1597 * the ep. But if fc_fcp_srr_error had got -FC_EX_TIMEOUT,
1598 * then fc_exch_timeout would be sending an abort. The exch_done
1599 * call by fc_fcp_srr_error would prevent fc_exch.c from seeing
1600 * an abort response though.
1602 if (fh->fh_type == FC_TYPE_BLS) {
1603 fc_fcp_unlock_pkt(fsp);
1604 return;
1607 fsp->recov_seq = NULL;
1608 switch (fc_frame_payload_op(fp)) {
1609 case ELS_LS_ACC:
1610 fsp->recov_retry = 0;
1611 fc_fcp_timer_set(fsp, FC_SCSI_REC_TOV);
1612 break;
1613 case ELS_LS_RJT:
1614 default:
1615 fc_timeout_error(fsp);
1616 break;
1618 fc_fcp_unlock_pkt(fsp);
1619 fsp->lp->tt.exch_done(seq);
1620 out:
1621 fc_frame_free(fp);
1622 fc_fcp_pkt_release(fsp); /* drop hold for outstanding SRR */
1625 static void fc_fcp_srr_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1627 if (fc_fcp_lock_pkt(fsp))
1628 goto out;
1629 fsp->lp->tt.exch_done(fsp->recov_seq);
1630 fsp->recov_seq = NULL;
1631 switch (PTR_ERR(fp)) {
1632 case -FC_EX_TIMEOUT:
1633 if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1634 fc_fcp_rec(fsp);
1635 else
1636 fc_timeout_error(fsp);
1637 break;
1638 case -FC_EX_CLOSED: /* e.g., link failure */
1639 /* fall through */
1640 default:
1641 fc_fcp_retry_cmd(fsp);
1642 break;
1644 fc_fcp_unlock_pkt(fsp);
1645 out:
1646 fc_fcp_pkt_release(fsp); /* drop hold for outstanding SRR */
1649 static inline int fc_fcp_lport_queue_ready(struct fc_lport *lp)
1651 /* lock ? */
1652 return (lp->state == LPORT_ST_READY) && lp->link_up && !lp->qfull;
1656 * fc_queuecommand - The queuecommand function of the scsi template
1657 * @cmd: struct scsi_cmnd to be executed
1658 * @done: Callback function to be called when cmd is completed
1660 * this is the i/o strategy routine, called by the scsi layer
1661 * this routine is called with holding the host_lock.
1663 int fc_queuecommand(struct scsi_cmnd *sc_cmd, void (*done)(struct scsi_cmnd *))
1665 struct fc_lport *lp;
1666 struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
1667 struct fc_fcp_pkt *fsp;
1668 struct fc_rport_libfc_priv *rp;
1669 int rval;
1670 int rc = 0;
1671 struct fcoe_dev_stats *stats;
1673 lp = shost_priv(sc_cmd->device->host);
1675 rval = fc_remote_port_chkready(rport);
1676 if (rval) {
1677 sc_cmd->result = rval;
1678 done(sc_cmd);
1679 goto out;
1682 if (!*(struct fc_remote_port **)rport->dd_data) {
1684 * rport is transitioning from blocked/deleted to
1685 * online
1687 sc_cmd->result = DID_IMM_RETRY << 16;
1688 done(sc_cmd);
1689 goto out;
1692 rp = rport->dd_data;
1694 if (!fc_fcp_lport_queue_ready(lp)) {
1695 rc = SCSI_MLQUEUE_HOST_BUSY;
1696 goto out;
1699 fsp = fc_fcp_pkt_alloc(lp, GFP_ATOMIC);
1700 if (fsp == NULL) {
1701 rc = SCSI_MLQUEUE_HOST_BUSY;
1702 goto out;
1706 * build the libfc request pkt
1708 fsp->cmd = sc_cmd; /* save the cmd */
1709 fsp->lp = lp; /* save the softc ptr */
1710 fsp->rport = rport; /* set the remote port ptr */
1711 sc_cmd->scsi_done = done;
1714 * set up the transfer length
1716 fsp->data_len = scsi_bufflen(sc_cmd);
1717 fsp->xfer_len = 0;
1720 * setup the data direction
1722 stats = fc_lport_get_stats(lp);
1723 if (sc_cmd->sc_data_direction == DMA_FROM_DEVICE) {
1724 fsp->req_flags = FC_SRB_READ;
1725 stats->InputRequests++;
1726 stats->InputMegabytes = fsp->data_len;
1727 } else if (sc_cmd->sc_data_direction == DMA_TO_DEVICE) {
1728 fsp->req_flags = FC_SRB_WRITE;
1729 stats->OutputRequests++;
1730 stats->OutputMegabytes = fsp->data_len;
1731 } else {
1732 fsp->req_flags = 0;
1733 stats->ControlRequests++;
1736 fsp->tgt_flags = rp->flags;
1738 init_timer(&fsp->timer);
1739 fsp->timer.data = (unsigned long)fsp;
1742 * send it to the lower layer
1743 * if we get -1 return then put the request in the pending
1744 * queue.
1746 rval = fc_fcp_pkt_send(lp, fsp);
1747 if (rval != 0) {
1748 fsp->state = FC_SRB_FREE;
1749 fc_fcp_pkt_release(fsp);
1750 rc = SCSI_MLQUEUE_HOST_BUSY;
1752 out:
1753 return rc;
1755 EXPORT_SYMBOL(fc_queuecommand);
1758 * fc_io_compl() - Handle responses for completed commands
1759 * @fsp: scsi packet
1761 * Translates a error to a Linux SCSI error.
1763 * The fcp packet lock must be held when calling.
1765 static void fc_io_compl(struct fc_fcp_pkt *fsp)
1767 struct fc_fcp_internal *si;
1768 struct scsi_cmnd *sc_cmd;
1769 struct fc_lport *lp;
1770 unsigned long flags;
1772 /* release outstanding ddp context */
1773 fc_fcp_ddp_done(fsp);
1775 fsp->state |= FC_SRB_COMPL;
1776 if (!(fsp->state & FC_SRB_FCP_PROCESSING_TMO)) {
1777 spin_unlock_bh(&fsp->scsi_pkt_lock);
1778 del_timer_sync(&fsp->timer);
1779 spin_lock_bh(&fsp->scsi_pkt_lock);
1782 lp = fsp->lp;
1783 si = fc_get_scsi_internal(lp);
1784 spin_lock_irqsave(lp->host->host_lock, flags);
1785 if (!fsp->cmd) {
1786 spin_unlock_irqrestore(lp->host->host_lock, flags);
1787 return;
1791 * if a command timed out while we had to try and throttle IO
1792 * and it is now getting cleaned up, then we are about to
1793 * try again so clear the throttled flag incase we get more
1794 * time outs.
1796 if (si->throttled && fsp->state & FC_SRB_NOMEM)
1797 si->throttled = 0;
1799 sc_cmd = fsp->cmd;
1800 fsp->cmd = NULL;
1802 if (!sc_cmd->SCp.ptr) {
1803 spin_unlock_irqrestore(lp->host->host_lock, flags);
1804 return;
1807 CMD_SCSI_STATUS(sc_cmd) = fsp->cdb_status;
1808 switch (fsp->status_code) {
1809 case FC_COMPLETE:
1810 if (fsp->cdb_status == 0) {
1812 * good I/O status
1814 sc_cmd->result = DID_OK << 16;
1815 if (fsp->scsi_resid)
1816 CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid;
1817 } else if (fsp->cdb_status == QUEUE_FULL) {
1818 struct scsi_device *tmp_sdev;
1819 struct scsi_device *sdev = sc_cmd->device;
1821 shost_for_each_device(tmp_sdev, sdev->host) {
1822 if (tmp_sdev->id != sdev->id)
1823 continue;
1825 if (tmp_sdev->queue_depth > 1) {
1826 scsi_track_queue_full(tmp_sdev,
1827 tmp_sdev->
1828 queue_depth - 1);
1831 sc_cmd->result = (DID_OK << 16) | fsp->cdb_status;
1832 } else {
1834 * transport level I/O was ok but scsi
1835 * has non zero status
1837 sc_cmd->result = (DID_OK << 16) | fsp->cdb_status;
1839 break;
1840 case FC_ERROR:
1841 sc_cmd->result = DID_ERROR << 16;
1842 break;
1843 case FC_DATA_UNDRUN:
1844 if ((fsp->cdb_status == 0) && !(fsp->req_flags & FC_SRB_READ)) {
1846 * scsi status is good but transport level
1847 * underrun.
1849 sc_cmd->result = DID_OK << 16;
1850 } else {
1852 * scsi got underrun, this is an error
1854 CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid;
1855 sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
1857 break;
1858 case FC_DATA_OVRRUN:
1860 * overrun is an error
1862 sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
1863 break;
1864 case FC_CMD_ABORTED:
1865 sc_cmd->result = (DID_ERROR << 16) | fsp->io_status;
1866 break;
1867 case FC_CMD_TIME_OUT:
1868 sc_cmd->result = (DID_BUS_BUSY << 16) | fsp->io_status;
1869 break;
1870 case FC_CMD_RESET:
1871 sc_cmd->result = (DID_RESET << 16);
1872 break;
1873 case FC_HRD_ERROR:
1874 sc_cmd->result = (DID_NO_CONNECT << 16);
1875 break;
1876 default:
1877 sc_cmd->result = (DID_ERROR << 16);
1878 break;
1881 list_del(&fsp->list);
1882 sc_cmd->SCp.ptr = NULL;
1883 sc_cmd->scsi_done(sc_cmd);
1884 spin_unlock_irqrestore(lp->host->host_lock, flags);
1886 /* release ref from initial allocation in queue command */
1887 fc_fcp_pkt_release(fsp);
1891 * fc_fcp_complete() - complete processing of a fcp packet
1892 * @fsp: fcp packet
1894 * This function may sleep if a fsp timer is pending.
1895 * The host lock must not be held by caller.
1897 void fc_fcp_complete(struct fc_fcp_pkt *fsp)
1899 if (fc_fcp_lock_pkt(fsp))
1900 return;
1902 fc_fcp_complete_locked(fsp);
1903 fc_fcp_unlock_pkt(fsp);
1905 EXPORT_SYMBOL(fc_fcp_complete);
1908 * fc_eh_abort() - Abort a command
1909 * @sc_cmd: scsi command to abort
1911 * From scsi host template.
1912 * send ABTS to the target device and wait for the response
1913 * sc_cmd is the pointer to the command to be aborted.
1915 int fc_eh_abort(struct scsi_cmnd *sc_cmd)
1917 struct fc_fcp_pkt *fsp;
1918 struct fc_lport *lp;
1919 int rc = FAILED;
1920 unsigned long flags;
1922 lp = shost_priv(sc_cmd->device->host);
1923 if (lp->state != LPORT_ST_READY)
1924 return rc;
1925 else if (!lp->link_up)
1926 return rc;
1928 spin_lock_irqsave(lp->host->host_lock, flags);
1929 fsp = CMD_SP(sc_cmd);
1930 if (!fsp) {
1931 /* command completed while scsi eh was setting up */
1932 spin_unlock_irqrestore(lp->host->host_lock, flags);
1933 return SUCCESS;
1935 /* grab a ref so the fsp and sc_cmd cannot be relased from under us */
1936 fc_fcp_pkt_hold(fsp);
1937 spin_unlock_irqrestore(lp->host->host_lock, flags);
1939 if (fc_fcp_lock_pkt(fsp)) {
1940 /* completed while we were waiting for timer to be deleted */
1941 rc = SUCCESS;
1942 goto release_pkt;
1945 rc = fc_fcp_pkt_abort(lp, fsp);
1946 fc_fcp_unlock_pkt(fsp);
1948 release_pkt:
1949 fc_fcp_pkt_release(fsp);
1950 return rc;
1952 EXPORT_SYMBOL(fc_eh_abort);
1955 * fc_eh_device_reset() Reset a single LUN
1956 * @sc_cmd: scsi command
1958 * Set from scsi host template to send tm cmd to the target and wait for the
1959 * response.
1961 int fc_eh_device_reset(struct scsi_cmnd *sc_cmd)
1963 struct fc_lport *lp;
1964 struct fc_fcp_pkt *fsp;
1965 struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
1966 int rc = FAILED;
1967 struct fc_rport_libfc_priv *rp;
1968 int rval;
1970 rval = fc_remote_port_chkready(rport);
1971 if (rval)
1972 goto out;
1974 rp = rport->dd_data;
1975 lp = shost_priv(sc_cmd->device->host);
1977 if (lp->state != LPORT_ST_READY)
1978 return rc;
1980 FC_SCSI_DBG(lp, "Resetting rport (%6x)\n", rport->port_id);
1982 fsp = fc_fcp_pkt_alloc(lp, GFP_NOIO);
1983 if (fsp == NULL) {
1984 printk(KERN_WARNING "libfc: could not allocate scsi_pkt\n");
1985 sc_cmd->result = DID_NO_CONNECT << 16;
1986 goto out;
1990 * Build the libfc request pkt. Do not set the scsi cmnd, because
1991 * the sc passed in is not setup for execution like when sent
1992 * through the queuecommand callout.
1994 fsp->lp = lp; /* save the softc ptr */
1995 fsp->rport = rport; /* set the remote port ptr */
1998 * flush outstanding commands
2000 rc = fc_lun_reset(lp, fsp, scmd_id(sc_cmd), sc_cmd->device->lun);
2001 fsp->state = FC_SRB_FREE;
2002 fc_fcp_pkt_release(fsp);
2004 out:
2005 return rc;
2007 EXPORT_SYMBOL(fc_eh_device_reset);
2010 * fc_eh_host_reset() - The reset function will reset the ports on the host.
2011 * @sc_cmd: scsi command
2013 int fc_eh_host_reset(struct scsi_cmnd *sc_cmd)
2015 struct Scsi_Host *shost = sc_cmd->device->host;
2016 struct fc_lport *lp = shost_priv(shost);
2017 unsigned long wait_tmo;
2019 FC_SCSI_DBG(lp, "Resetting host\n");
2021 lp->tt.lport_reset(lp);
2022 wait_tmo = jiffies + FC_HOST_RESET_TIMEOUT;
2023 while (!fc_fcp_lport_queue_ready(lp) && time_before(jiffies, wait_tmo))
2024 msleep(1000);
2026 if (fc_fcp_lport_queue_ready(lp)) {
2027 shost_printk(KERN_INFO, shost, "libfc: Host reset succeeded "
2028 "on port (%6x)\n", fc_host_port_id(lp->host));
2029 return SUCCESS;
2030 } else {
2031 shost_printk(KERN_INFO, shost, "libfc: Host reset failed, "
2032 "port (%6x) is not ready.\n",
2033 fc_host_port_id(lp->host));
2034 return FAILED;
2037 EXPORT_SYMBOL(fc_eh_host_reset);
2040 * fc_slave_alloc() - configure queue depth
2041 * @sdev: scsi device
2043 * Configures queue depth based on host's cmd_per_len. If not set
2044 * then we use the libfc default.
2046 int fc_slave_alloc(struct scsi_device *sdev)
2048 struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
2049 int queue_depth;
2051 if (!rport || fc_remote_port_chkready(rport))
2052 return -ENXIO;
2054 if (sdev->tagged_supported) {
2055 if (sdev->host->hostt->cmd_per_lun)
2056 queue_depth = sdev->host->hostt->cmd_per_lun;
2057 else
2058 queue_depth = FC_FCP_DFLT_QUEUE_DEPTH;
2059 scsi_activate_tcq(sdev, queue_depth);
2061 return 0;
2063 EXPORT_SYMBOL(fc_slave_alloc);
2065 int fc_change_queue_depth(struct scsi_device *sdev, int qdepth)
2067 scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
2068 return sdev->queue_depth;
2070 EXPORT_SYMBOL(fc_change_queue_depth);
2072 int fc_change_queue_type(struct scsi_device *sdev, int tag_type)
2074 if (sdev->tagged_supported) {
2075 scsi_set_tag_type(sdev, tag_type);
2076 if (tag_type)
2077 scsi_activate_tcq(sdev, sdev->queue_depth);
2078 else
2079 scsi_deactivate_tcq(sdev, sdev->queue_depth);
2080 } else
2081 tag_type = 0;
2083 return tag_type;
2085 EXPORT_SYMBOL(fc_change_queue_type);
2087 void fc_fcp_destroy(struct fc_lport *lp)
2089 struct fc_fcp_internal *si = fc_get_scsi_internal(lp);
2091 if (!list_empty(&si->scsi_pkt_queue))
2092 printk(KERN_ERR "libfc: Leaked SCSI packets when destroying "
2093 "port (%6x)\n", fc_host_port_id(lp->host));
2095 mempool_destroy(si->scsi_pkt_pool);
2096 kfree(si);
2097 lp->scsi_priv = NULL;
2099 EXPORT_SYMBOL(fc_fcp_destroy);
2101 int fc_fcp_init(struct fc_lport *lp)
2103 int rc;
2104 struct fc_fcp_internal *si;
2106 if (!lp->tt.fcp_cmd_send)
2107 lp->tt.fcp_cmd_send = fc_fcp_cmd_send;
2109 if (!lp->tt.fcp_cleanup)
2110 lp->tt.fcp_cleanup = fc_fcp_cleanup;
2112 if (!lp->tt.fcp_abort_io)
2113 lp->tt.fcp_abort_io = fc_fcp_abort_io;
2115 si = kzalloc(sizeof(struct fc_fcp_internal), GFP_KERNEL);
2116 if (!si)
2117 return -ENOMEM;
2118 lp->scsi_priv = si;
2119 INIT_LIST_HEAD(&si->scsi_pkt_queue);
2121 si->scsi_pkt_pool = mempool_create_slab_pool(2, scsi_pkt_cachep);
2122 if (!si->scsi_pkt_pool) {
2123 rc = -ENOMEM;
2124 goto free_internal;
2126 return 0;
2128 free_internal:
2129 kfree(si);
2130 return rc;
2132 EXPORT_SYMBOL(fc_fcp_init);
2134 static int __init libfc_init(void)
2136 int rc;
2138 scsi_pkt_cachep = kmem_cache_create("libfc_fcp_pkt",
2139 sizeof(struct fc_fcp_pkt),
2140 0, SLAB_HWCACHE_ALIGN, NULL);
2141 if (scsi_pkt_cachep == NULL) {
2142 printk(KERN_ERR "libfc: Unable to allocate SRB cache, "
2143 "module load failed!");
2144 return -ENOMEM;
2147 rc = fc_setup_exch_mgr();
2148 if (rc)
2149 goto destroy_pkt_cache;
2151 rc = fc_setup_rport();
2152 if (rc)
2153 goto destroy_em;
2155 return rc;
2156 destroy_em:
2157 fc_destroy_exch_mgr();
2158 destroy_pkt_cache:
2159 kmem_cache_destroy(scsi_pkt_cachep);
2160 return rc;
2163 static void __exit libfc_exit(void)
2165 kmem_cache_destroy(scsi_pkt_cachep);
2166 fc_destroy_exch_mgr();
2167 fc_destroy_rport();
2170 module_init(libfc_init);
2171 module_exit(libfc_exit);