MINI2440: Added new T35 (QVGA) and Innolux 5.6" (VGA) TFTs
[linux-2.6/mini2440.git] / drivers / parisc / asp.c
blob9ca21098b146c73e54e0facbf101e657e21ddaa0
1 /*
2 * ASP Device Driver
4 * (c) Copyright 2000 The Puffin Group Inc.
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * by Helge Deller <deller@gmx.de>
14 #include <linux/errno.h>
15 #include <linux/init.h>
16 #include <linux/interrupt.h>
17 #include <linux/module.h>
18 #include <linux/slab.h>
19 #include <linux/types.h>
20 #include <asm/io.h>
21 #include <asm/led.h>
23 #include "gsc.h"
25 #define ASP_GSC_IRQ 3 /* hardcoded interrupt for GSC */
27 #define ASP_VER_OFFSET 0x20 /* offset of ASP version */
29 #define ASP_LED_ADDR 0xf0800020
31 #define VIPER_INT_WORD 0xFFFBF088 /* addr of viper interrupt word */
33 static struct gsc_asic asp;
35 static void asp_choose_irq(struct parisc_device *dev, void *ctrl)
37 int irq;
39 switch (dev->id.sversion) {
40 case 0x71: irq = 9; break; /* SCSI */
41 case 0x72: irq = 8; break; /* LAN */
42 case 0x73: irq = 1; break; /* HIL */
43 case 0x74: irq = 7; break; /* Centronics */
44 case 0x75: irq = (dev->hw_path == 4) ? 5 : 6; break; /* RS232 */
45 case 0x76: irq = 10; break; /* EISA BA */
46 case 0x77: irq = 11; break; /* Graphics1 */
47 case 0x7a: irq = 13; break; /* Audio (Bushmaster) */
48 case 0x7b: irq = 13; break; /* Audio (Scorpio) */
49 case 0x7c: irq = 3; break; /* FW SCSI */
50 case 0x7d: irq = 4; break; /* FDDI */
51 case 0x7f: irq = 13; break; /* Audio (Outfield) */
52 default: return; /* Unknown */
55 gsc_asic_assign_irq(ctrl, irq, &dev->irq);
57 switch (dev->id.sversion) {
58 case 0x73: irq = 2; break; /* i8042 High-priority */
59 case 0x76: irq = 0; break; /* EISA BA */
60 default: return; /* Other */
63 gsc_asic_assign_irq(ctrl, irq, &dev->aux_irq);
66 /* There are two register ranges we're interested in. Interrupt /
67 * Status / LED are at 0xf080xxxx and Asp special registers are at
68 * 0xf082fxxx. PDC only tells us that Asp is at 0xf082f000, so for
69 * the purposes of interrupt handling, we have to tell other bits of
70 * the kernel to look at the other registers.
72 #define ASP_INTERRUPT_ADDR 0xf0800000
74 static int __init asp_init_chip(struct parisc_device *dev)
76 struct gsc_irq gsc_irq;
77 int ret;
79 asp.version = gsc_readb(dev->hpa.start + ASP_VER_OFFSET) & 0xf;
80 asp.name = (asp.version == 1) ? "Asp" : "Cutoff";
81 asp.hpa = ASP_INTERRUPT_ADDR;
83 printk(KERN_INFO "%s version %d at 0x%lx found.\n",
84 asp.name, asp.version, (unsigned long)dev->hpa.start);
86 /* the IRQ ASP should use */
87 ret = -EBUSY;
88 dev->irq = gsc_claim_irq(&gsc_irq, ASP_GSC_IRQ);
89 if (dev->irq < 0) {
90 printk(KERN_ERR "%s(): cannot get GSC irq\n", __func__);
91 goto out;
94 asp.eim = ((u32) gsc_irq.txn_addr) | gsc_irq.txn_data;
96 ret = request_irq(gsc_irq.irq, gsc_asic_intr, 0, "asp", &asp);
97 if (ret < 0)
98 goto out;
100 /* Program VIPER to interrupt on the ASP irq */
101 gsc_writel((1 << (31 - ASP_GSC_IRQ)),VIPER_INT_WORD);
103 /* Done init'ing, register this driver */
104 ret = gsc_common_setup(dev, &asp);
105 if (ret)
106 goto out;
108 gsc_fixup_irqs(dev, &asp, asp_choose_irq);
109 /* Mongoose is a sibling of Asp, not a child... */
110 gsc_fixup_irqs(parisc_parent(dev), &asp, asp_choose_irq);
112 /* initialize the chassis LEDs */
113 #ifdef CONFIG_CHASSIS_LCD_LED
114 register_led_driver(DISPLAY_MODEL_OLD_ASP, LED_CMD_REG_NONE,
115 ASP_LED_ADDR);
116 #endif
118 out:
119 return ret;
122 static struct parisc_device_id asp_tbl[] = {
123 { HPHW_BA, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00070 },
124 { 0, }
127 struct parisc_driver asp_driver = {
128 .name = "asp",
129 .id_table = asp_tbl,
130 .probe = asp_init_chip,