Blackfin arch: fix bug NOR Flash MTD mount fail
[linux-2.6/mini2440.git] / arch / mips / jazz / setup.c
bloba7857973ca03fc7bd603742059858dcaf74d5bd4
1 /*
2 * Setup pointers to hardware-dependent routines.
4 * This file is subject to the terms and conditions of the GNU General Public
5 * License. See the file "COPYING" in the main directory of this archive
6 * for more details.
8 * Copyright (C) 1996, 1997, 1998, 2001, 07 by Ralf Baechle
9 * Copyright (C) 2001 MIPS Technologies, Inc.
10 * Copyright (C) 2007 by Thomas Bogendoerfer
12 #include <linux/eisa.h>
13 #include <linux/hdreg.h>
14 #include <linux/init.h>
15 #include <linux/ioport.h>
16 #include <linux/sched.h>
17 #include <linux/interrupt.h>
18 #include <linux/mm.h>
19 #include <linux/console.h>
20 #include <linux/fb.h>
21 #include <linux/ide.h>
22 #include <linux/pm.h>
23 #include <linux/screen_info.h>
24 #include <linux/platform_device.h>
25 #include <linux/serial_8250.h>
27 #include <asm/bootinfo.h>
28 #include <asm/irq.h>
29 #include <asm/jazz.h>
30 #include <asm/jazzdma.h>
31 #include <asm/reboot.h>
32 #include <asm/io.h>
33 #include <asm/pgtable.h>
34 #include <asm/time.h>
35 #include <asm/traps.h>
36 #include <asm/mc146818-time.h>
38 extern asmlinkage void jazz_handle_int(void);
40 extern void jazz_machine_restart(char *command);
42 static struct resource jazz_io_resources[] = {
44 .start = 0x00,
45 .end = 0x1f,
46 .name = "dma1",
47 .flags = IORESOURCE_BUSY
48 }, {
49 .start = 0x40,
50 .end = 0x5f,
51 .name = "timer",
52 .flags = IORESOURCE_BUSY
53 }, {
54 .start = 0x80,
55 .end = 0x8f,
56 .name = "dma page reg",
57 .flags = IORESOURCE_BUSY
58 }, {
59 .start = 0xc0,
60 .end = 0xdf,
61 .name = "dma2",
62 .flags = IORESOURCE_BUSY
66 void __init plat_mem_setup(void)
68 int i;
70 /* Map 0xe0000000 -> 0x0:800005C0, 0xe0010000 -> 0x1:30000580 */
71 add_wired_entry(0x02000017, 0x03c00017, 0xe0000000, PM_64K);
72 /* Map 0xe2000000 -> 0x0:900005C0, 0xe3010000 -> 0x0:910005C0 */
73 add_wired_entry(0x02400017, 0x02440017, 0xe2000000, PM_16M);
74 /* Map 0xe4000000 -> 0x0:600005C0, 0xe4100000 -> 400005C0 */
75 add_wired_entry(0x01800017, 0x01000017, 0xe4000000, PM_4M);
77 set_io_port_base(JAZZ_PORT_BASE);
78 #ifdef CONFIG_EISA
79 if (mips_machtype == MACH_MIPS_MAGNUM_4000)
80 EISA_bus = 1;
81 #endif
82 isa_slot_offset = 0xe3000000;
84 /* request I/O space for devices used on all i[345]86 PCs */
85 for (i = 0; i < ARRAY_SIZE(jazz_io_resources); i++)
86 request_resource(&ioport_resource, jazz_io_resources + i);
88 /* The RTC is outside the port address space */
90 _machine_restart = jazz_machine_restart;
92 #ifdef CONFIG_VT
93 screen_info = (struct screen_info) {
94 0, 0, /* orig-x, orig-y */
95 0, /* unused */
96 0, /* orig_video_page */
97 0, /* orig_video_mode */
98 160, /* orig_video_cols */
99 0, 0, 0, /* unused, ega_bx, unused */
100 64, /* orig_video_lines */
101 0, /* orig_video_isVGA */
102 16 /* orig_video_points */
104 #endif
106 add_preferred_console("ttyS", 0, "9600");
109 #ifdef CONFIG_OLIVETTI_M700
110 #define UART_CLK 1843200
111 #else
112 /* Some Jazz machines seem to have an 8MHz crystal clock but I don't know
113 exactly which ones ... XXX */
114 #define UART_CLK (8000000 / 16) /* ( 3072000 / 16) */
115 #endif
117 #define MEMPORT(_base, _irq) \
119 .mapbase = (_base), \
120 .membase = (void *)(_base), \
121 .irq = (_irq), \
122 .uartclk = UART_CLK, \
123 .iotype = UPIO_MEM, \
124 .flags = UPF_BOOT_AUTOCONF, \
127 static struct plat_serial8250_port jazz_serial_data[] = {
128 MEMPORT(JAZZ_SERIAL1_BASE, JAZZ_SERIAL1_IRQ),
129 MEMPORT(JAZZ_SERIAL2_BASE, JAZZ_SERIAL2_IRQ),
130 { },
133 static struct platform_device jazz_serial8250_device = {
134 .name = "serial8250",
135 .id = PLAT8250_DEV_PLATFORM,
136 .dev = {
137 .platform_data = jazz_serial_data,
141 static struct resource jazz_esp_rsrc[] = {
143 .start = JAZZ_SCSI_BASE,
144 .end = JAZZ_SCSI_BASE + 31,
145 .flags = IORESOURCE_MEM
148 .start = JAZZ_SCSI_DMA,
149 .end = JAZZ_SCSI_DMA,
150 .flags = IORESOURCE_MEM
153 .start = JAZZ_SCSI_IRQ,
154 .end = JAZZ_SCSI_IRQ,
155 .flags = IORESOURCE_IRQ
159 static struct platform_device jazz_esp_pdev = {
160 .name = "jazz_esp",
161 .num_resources = ARRAY_SIZE(jazz_esp_rsrc),
162 .resource = jazz_esp_rsrc
165 static struct resource jazz_sonic_rsrc[] = {
167 .start = JAZZ_ETHERNET_BASE,
168 .end = JAZZ_ETHERNET_BASE + 0xff,
169 .flags = IORESOURCE_MEM
172 .start = JAZZ_ETHERNET_IRQ,
173 .end = JAZZ_ETHERNET_IRQ,
174 .flags = IORESOURCE_IRQ
178 static struct platform_device jazz_sonic_pdev = {
179 .name = "jazzsonic",
180 .num_resources = ARRAY_SIZE(jazz_sonic_rsrc),
181 .resource = jazz_sonic_rsrc
184 static struct resource jazz_cmos_rsrc[] = {
186 .start = 0x70,
187 .end = 0x71,
188 .flags = IORESOURCE_IO
191 .start = 8,
192 .end = 8,
193 .flags = IORESOURCE_IRQ
197 static struct platform_device jazz_cmos_pdev = {
198 .name = "rtc_cmos",
199 .num_resources = ARRAY_SIZE(jazz_cmos_rsrc),
200 .resource = jazz_cmos_rsrc
203 static int __init jazz_setup_devinit(void)
205 platform_device_register(&jazz_serial8250_device);
206 platform_device_register(&jazz_esp_pdev);
207 platform_device_register(&jazz_sonic_pdev);
208 platform_device_register(&jazz_cmos_pdev);
209 return 0;
212 device_initcall(jazz_setup_devinit);