drivers/acpi/acpica/hwgpe.c

   1
   2 /******************************************************************************
   3  *
   4  * Module Name: hwgpe - Low level GPE enable/disable/clear functions
   5  *
   6  *****************************************************************************/
   7
   8 /*
   9  * Copyright (C) 2000 - 2008, Intel Corp.
  10  * All rights reserved.
  11  *
  12  * Redistribution and use in source and binary forms, with or without
  13  * modification, are permitted provided that the following conditions
  14  * are met:
  15  * 1. Redistributions of source code must retain the above copyright
  16  *    notice, this list of conditions, and the following disclaimer,
  17  *    without modification.
  18  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  19  *    substantially similar to the "NO WARRANTY" disclaimer below
  20  *    ("Disclaimer") and any redistribution must be conditioned upon
  21  *    including a substantially similar Disclaimer requirement for further
  22  *    binary redistribution.
  23  * 3. Neither the names of the above-listed copyright holders nor the names
  24  *    of any contributors may be used to endorse or promote products derived
  25  *    from this software without specific prior written permission.
  26  *
  27  * Alternatively, this software may be distributed under the terms of the
  28  * GNU General Public License ("GPL") version 2 as published by the Free
  29  * Software Foundation.
  30  *
  31  * NO WARRANTY
  32  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  33  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  34  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  35  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  36  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  37  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  38  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  39  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  40  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  41  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  42  * POSSIBILITY OF SUCH DAMAGES.
  43  */
  44
  45 #include <acpi/acpi.h>
  46 #include "accommon.h"
  47 #include "acevents.h"
  48
  49 #define _COMPONENT          ACPI_HARDWARE
  50 ACPI_MODULE_NAME("hwgpe")
  51
  52 /* Local prototypes */
  53 static acpi_status
  54 acpi_hw_enable_wakeup_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
  55                                 struct acpi_gpe_block_info *gpe_block,
  56                                 void *context);
  57
  58 /******************************************************************************
  59  *
  60  * FUNCTION:    acpi_hw_low_disable_gpe
  61  *
  62  * PARAMETERS:  gpe_event_info      - Info block for the GPE to be disabled
  63  *
  64  * RETURN:      Status
  65  *
  66  * DESCRIPTION: Disable a single GPE in the enable register.
  67  *
  68  ******************************************************************************/
  69
  70 acpi_status acpi_hw_low_disable_gpe(struct acpi_gpe_event_info *gpe_event_info)
  71 {
  72         struct acpi_gpe_register_info *gpe_register_info;
  73         acpi_status status;
  74         u32 enable_mask;
  75
  76         /* Get the info block for the entire GPE register */
  77
  78         gpe_register_info = gpe_event_info->register_info;
  79         if (!gpe_register_info) {
  80                 return (AE_NOT_EXIST);
  81         }
  82
  83         /* Get current value of the enable register that contains this GPE */
  84
  85         status = acpi_read(&enable_mask, &gpe_register_info->enable_address);
  86         if (ACPI_FAILURE(status)) {
  87                 return (status);
  88         }
  89
  90         /* Clear just the bit that corresponds to this GPE */
  91
  92         ACPI_CLEAR_BIT(enable_mask,
  93                        ((u32) 1 <<
  94                         (gpe_event_info->gpe_number -
  95                          gpe_register_info->base_gpe_number)));
  96
  97         /* Write the updated enable mask */
  98
  99         status = acpi_write(enable_mask, &gpe_register_info->enable_address);
 100         return (status);
 101 }
 102
 103 /******************************************************************************
 104  *
 105  * FUNCTION:    acpi_hw_write_gpe_enable_reg
 106  *
 107  * PARAMETERS:  gpe_event_info      - Info block for the GPE to be enabled
 108  *
 109  * RETURN:      Status
 110  *
 111  * DESCRIPTION: Write a GPE enable register.  Note: The bit for this GPE must
 112  *              already be cleared or set in the parent register
 113  *              enable_for_run mask.
 114  *
 115  ******************************************************************************/
 116
 117 acpi_status
 118 acpi_hw_write_gpe_enable_reg(struct acpi_gpe_event_info * gpe_event_info)
 119 {
 120         struct acpi_gpe_register_info *gpe_register_info;
 121         acpi_status status;
 122
 123         ACPI_FUNCTION_ENTRY();
 124
 125         /* Get the info block for the entire GPE register */
 126
 127         gpe_register_info = gpe_event_info->register_info;
 128         if (!gpe_register_info) {
 129                 return (AE_NOT_EXIST);
 130         }
 131
 132         /* Write the entire GPE (runtime) enable register */
 133
 134         status = acpi_write(gpe_register_info->enable_for_run,
 135                             &gpe_register_info->enable_address);
 136
 137         return (status);
 138 }
 139
 140 /******************************************************************************
 141  *
 142  * FUNCTION:    acpi_hw_clear_gpe
 143  *
 144  * PARAMETERS:  gpe_event_info      - Info block for the GPE to be cleared
 145  *
 146  * RETURN:      Status
 147  *
 148  * DESCRIPTION: Clear the status bit for a single GPE.
 149  *
 150  ******************************************************************************/
 151
 152 acpi_status acpi_hw_clear_gpe(struct acpi_gpe_event_info * gpe_event_info)
 153 {
 154         acpi_status status;
 155         u8 register_bit;
 156
 157         ACPI_FUNCTION_ENTRY();
 158
 159         register_bit = (u8)
 160             (1 <<
 161              (gpe_event_info->gpe_number -
 162               gpe_event_info->register_info->base_gpe_number));
 163
 164         /*
 165          * Write a one to the appropriate bit in the status register to
 166          * clear this GPE.
 167          */
 168         status = acpi_write(register_bit,
 169                             &gpe_event_info->register_info->status_address);
 170
 171         return (status);
 172 }
 173
 174 /******************************************************************************
 175  *
 176  * FUNCTION:    acpi_hw_get_gpe_status
 177  *
 178  * PARAMETERS:  gpe_event_info      - Info block for the GPE to queried
 179  *              event_status        - Where the GPE status is returned
 180  *
 181  * RETURN:      Status
 182  *
 183  * DESCRIPTION: Return the status of a single GPE.
 184  *
 185  ******************************************************************************/
 186
 187 acpi_status
 188 acpi_hw_get_gpe_status(struct acpi_gpe_event_info * gpe_event_info,
 189                        acpi_event_status * event_status)
 190 {
 191         u32 in_byte;
 192         u8 register_bit;
 193         struct acpi_gpe_register_info *gpe_register_info;
 194         acpi_status status;
 195         acpi_event_status local_event_status = 0;
 196
 197         ACPI_FUNCTION_ENTRY();
 198
 199         if (!event_status) {
 200                 return (AE_BAD_PARAMETER);
 201         }
 202
 203         /* Get the info block for the entire GPE register */
 204
 205         gpe_register_info = gpe_event_info->register_info;
 206
 207         /* Get the register bitmask for this GPE */
 208
 209         register_bit = (u8)
 210             (1 <<
 211              (gpe_event_info->gpe_number -
 212               gpe_event_info->register_info->base_gpe_number));
 213
 214         /* GPE currently enabled? (enabled for runtime?) */
 215
 216         if (register_bit & gpe_register_info->enable_for_run) {
 217                 local_event_status |= ACPI_EVENT_FLAG_ENABLED;
 218         }
 219
 220         /* GPE enabled for wake? */
 221
 222         if (register_bit & gpe_register_info->enable_for_wake) {
 223                 local_event_status |= ACPI_EVENT_FLAG_WAKE_ENABLED;
 224         }
 225
 226         /* GPE currently active (status bit == 1)? */
 227
 228         status = acpi_read(&in_byte, &gpe_register_info->status_address);
 229         if (ACPI_FAILURE(status)) {
 230                 goto unlock_and_exit;
 231         }
 232
 233         if (register_bit & in_byte) {
 234                 local_event_status |= ACPI_EVENT_FLAG_SET;
 235         }
 236
 237         /* Set return value */
 238
 239         (*event_status) = local_event_status;
 240
 241       unlock_and_exit:
 242         return (status);
 243 }
 244
 245 /******************************************************************************
 246  *
 247  * FUNCTION:    acpi_hw_disable_gpe_block
 248  *
 249  * PARAMETERS:  gpe_xrupt_info      - GPE Interrupt info
 250  *              gpe_block           - Gpe Block info
 251  *
 252  * RETURN:      Status
 253  *
 254  * DESCRIPTION: Disable all GPEs within a single GPE block
 255  *
 256  ******************************************************************************/
 257
 258 acpi_status
 259 acpi_hw_disable_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
 260                           struct acpi_gpe_block_info *gpe_block, void *context)
 261 {
 262         u32 i;
 263         acpi_status status;
 264
 265         /* Examine each GPE Register within the block */
 266
 267         for (i = 0; i < gpe_block->register_count; i++) {
 268
 269                 /* Disable all GPEs in this register */
 270
 271                 status =
 272                     acpi_write(0x00,
 273                                &gpe_block->register_info[i].enable_address);
 274                 if (ACPI_FAILURE(status)) {
 275                         return (status);
 276                 }
 277         }
 278
 279         return (AE_OK);
 280 }
 281
 282 /******************************************************************************
 283  *
 284  * FUNCTION:    acpi_hw_clear_gpe_block
 285  *
 286  * PARAMETERS:  gpe_xrupt_info      - GPE Interrupt info
 287  *              gpe_block           - Gpe Block info
 288  *
 289  * RETURN:      Status
 290  *
 291  * DESCRIPTION: Clear status bits for all GPEs within a single GPE block
 292  *
 293  ******************************************************************************/
 294
 295 acpi_status
 296 acpi_hw_clear_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
 297                         struct acpi_gpe_block_info *gpe_block, void *context)
 298 {
 299         u32 i;
 300         acpi_status status;
 301
 302         /* Examine each GPE Register within the block */
 303
 304         for (i = 0; i < gpe_block->register_count; i++) {
 305
 306                 /* Clear status on all GPEs in this register */
 307
 308                 status =
 309                     acpi_write(0xFF,
 310                                &gpe_block->register_info[i].status_address);
 311                 if (ACPI_FAILURE(status)) {
 312                         return (status);
 313                 }
 314         }
 315
 316         return (AE_OK);
 317 }
 318
 319 /******************************************************************************
 320  *
 321  * FUNCTION:    acpi_hw_enable_runtime_gpe_block
 322  *
 323  * PARAMETERS:  gpe_xrupt_info      - GPE Interrupt info
 324  *              gpe_block           - Gpe Block info
 325  *
 326  * RETURN:      Status
 327  *
 328  * DESCRIPTION: Enable all "runtime" GPEs within a single GPE block. Includes
 329  *              combination wake/run GPEs.
 330  *
 331  ******************************************************************************/
 332
 333 acpi_status
 334 acpi_hw_enable_runtime_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
 335                                  struct acpi_gpe_block_info *gpe_block, void *context)
 336 {
 337         u32 i;
 338         acpi_status status;
 339
 340         /* NOTE: assumes that all GPEs are currently disabled */
 341
 342         /* Examine each GPE Register within the block */
 343
 344         for (i = 0; i < gpe_block->register_count; i++) {
 345                 if (!gpe_block->register_info[i].enable_for_run) {
 346                         continue;
 347                 }
 348
 349                 /* Enable all "runtime" GPEs in this register */
 350
 351                 status = acpi_write(gpe_block->register_info[i].enable_for_run,
 352                                     &gpe_block->register_info[i].
 353                                     enable_address);
 354                 if (ACPI_FAILURE(status)) {
 355                         return (status);
 356                 }
 357         }
 358
 359         return (AE_OK);
 360 }
 361
 362 /******************************************************************************
 363  *
 364  * FUNCTION:    acpi_hw_enable_wakeup_gpe_block
 365  *
 366  * PARAMETERS:  gpe_xrupt_info      - GPE Interrupt info
 367  *              gpe_block           - Gpe Block info
 368  *
 369  * RETURN:      Status
 370  *
 371  * DESCRIPTION: Enable all "wake" GPEs within a single GPE block. Includes
 372  *              combination wake/run GPEs.
 373  *
 374  ******************************************************************************/
 375
 376 static acpi_status
 377 acpi_hw_enable_wakeup_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
 378                                 struct acpi_gpe_block_info *gpe_block,
 379                                 void *context)
 380 {
 381         u32 i;
 382         acpi_status status;
 383
 384         /* Examine each GPE Register within the block */
 385
 386         for (i = 0; i < gpe_block->register_count; i++) {
 387                 if (!gpe_block->register_info[i].enable_for_wake) {
 388                         continue;
 389                 }
 390
 391                 /* Enable all "wake" GPEs in this register */
 392
 393                 status = acpi_write(gpe_block->register_info[i].enable_for_wake,
 394                                     &gpe_block->register_info[i].
 395                                     enable_address);
 396                 if (ACPI_FAILURE(status)) {
 397                         return (status);
 398                 }
 399         }
 400
 401         return (AE_OK);
 402 }
 403
 404 /******************************************************************************
 405  *
 406  * FUNCTION:    acpi_hw_disable_all_gpes
 407  *
 408  * PARAMETERS:  None
 409  *
 410  * RETURN:      Status
 411  *
 412  * DESCRIPTION: Disable and clear all GPEs in all GPE blocks
 413  *
 414  ******************************************************************************/
 415
 416 acpi_status acpi_hw_disable_all_gpes(void)
 417 {
 418         acpi_status status;
 419
 420         ACPI_FUNCTION_TRACE(hw_disable_all_gpes);
 421
 422         status = acpi_ev_walk_gpe_list(acpi_hw_disable_gpe_block, NULL);
 423         status = acpi_ev_walk_gpe_list(acpi_hw_clear_gpe_block, NULL);
 424         return_ACPI_STATUS(status);
 425 }
 426
 427 /******************************************************************************
 428  *
 429  * FUNCTION:    acpi_hw_enable_all_runtime_gpes
 430  *
 431  * PARAMETERS:  None
 432  *
 433  * RETURN:      Status
 434  *
 435  * DESCRIPTION: Enable all "runtime" GPEs, in all GPE blocks
 436  *
 437  ******************************************************************************/
 438
 439 acpi_status acpi_hw_enable_all_runtime_gpes(void)
 440 {
 441         acpi_status status;
 442
 443         ACPI_FUNCTION_TRACE(hw_enable_all_runtime_gpes);
 444
 445         status = acpi_ev_walk_gpe_list(acpi_hw_enable_runtime_gpe_block, NULL);
 446         return_ACPI_STATUS(status);
 447 }
 448
 449 /******************************************************************************
 450  *
 451  * FUNCTION:    acpi_hw_enable_all_wakeup_gpes
 452  *
 453  * PARAMETERS:  None
 454  *
 455  * RETURN:      Status
 456  *
 457  * DESCRIPTION: Enable all "wakeup" GPEs, in all GPE blocks
 458  *
 459  ******************************************************************************/
 460
 461 acpi_status acpi_hw_enable_all_wakeup_gpes(void)
 462 {
 463         acpi_status status;
 464
 465         ACPI_FUNCTION_TRACE(hw_enable_all_wakeup_gpes);
 466
 467         status = acpi_ev_walk_gpe_list(acpi_hw_enable_wakeup_gpe_block, NULL);
 468         return_ACPI_STATUS(status);
 469 }