drivers/ata/ata_generic.c

   1 /*
   2  *  ata_generic.c - Generic PATA/SATA controller driver.
   3  *  Copyright 2005 Red Hat Inc, all rights reserved.
   4  *
   5  *  Elements from ide/pci/generic.c
   6  *          Copyright (C) 2001-2002     Andre Hedrick <andre@linux-ide.org>
   7  *          Portions (C) Copyright 2002  Red Hat Inc <alan@redhat.com>
   8  *
   9  *  May be copied or modified under the terms of the GNU General Public License
  10  *
  11  *  Driver for PCI IDE interfaces implementing the standard bus mastering
  12  *  interface functionality. This assumes the BIOS did the drive set up and
  13  *  tuning for us. By default we do not grab all IDE class devices as they
  14  *  may have other drivers or need fixups to avoid problems. Instead we keep
  15  *  a default list of stuff without documentation/driver that appears to
  16  *  work.
  17  */
  18
  19 #include <linux/kernel.h>
  20 #include <linux/module.h>
  21 #include <linux/pci.h>
  22 #include <linux/init.h>
  23 #include <linux/blkdev.h>
  24 #include <linux/delay.h>
  25 #include <scsi/scsi_host.h>
  26 #include <linux/libata.h>
  27
  28 #define DRV_NAME "ata_generic"
  29 #define DRV_VERSION "0.2.15"
  30
  31 /*
  32  *      A generic parallel ATA driver using libata
  33  */
  34
  35 /**
  36  *      generic_set_mode        -       mode setting
  37  *      @link: link to set up
  38  *      @unused: returned device on error
  39  *
  40  *      Use a non standard set_mode function. We don't want to be tuned.
  41  *      The BIOS configured everything. Our job is not to fiddle. We
  42  *      read the dma enabled bits from the PCI configuration of the device
  43  *      and respect them.
  44  */
  45
  46 static int generic_set_mode(struct ata_link *link, struct ata_device **unused)
  47 {
  48         struct ata_port *ap = link->ap;
  49         int dma_enabled = 0;
  50         struct ata_device *dev;
  51         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
  52
  53         /* Bits 5 and 6 indicate if DMA is active on master/slave */
  54         if (ap->ioaddr.bmdma_addr)
  55                 dma_enabled = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
  56
  57         if (pdev->vendor == PCI_VENDOR_ID_CENATEK)
  58                 dma_enabled = 0xFF;
  59
  60         ata_for_each_dev(dev, link, ENABLED) {
  61                 /* We don't really care */
  62                 dev->pio_mode = XFER_PIO_0;
  63                 dev->dma_mode = XFER_MW_DMA_0;
  64                 /* We do need the right mode information for DMA or PIO
  65                    and this comes from the current configuration flags */
  66                 if (dma_enabled & (1 << (5 + dev->devno))) {
  67                         unsigned int xfer_mask = ata_id_xfermask(dev->id);
  68                         const char *name;
  69
  70                         if (xfer_mask & (ATA_MASK_MWDMA | ATA_MASK_UDMA))
  71                                 name = ata_mode_string(xfer_mask);
  72                         else {
  73                                 /* SWDMA perhaps? */
  74                                 name = "DMA";
  75                                 xfer_mask |= ata_xfer_mode2mask(XFER_MW_DMA_0);
  76                         }
  77
  78                         ata_dev_printk(dev, KERN_INFO, "configured for %s\n",
  79                                        name);
  80
  81                         dev->xfer_mode = ata_xfer_mask2mode(xfer_mask);
  82                         dev->xfer_shift = ata_xfer_mode2shift(dev->xfer_mode);
  83                         dev->flags &= ~ATA_DFLAG_PIO;
  84                 } else {
  85                         ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
  86                         dev->xfer_mode = XFER_PIO_0;
  87                         dev->xfer_shift = ATA_SHIFT_PIO;
  88                         dev->flags |= ATA_DFLAG_PIO;
  89                 }
  90         }
  91         return 0;
  92 }
  93
  94 static struct scsi_host_template generic_sht = {
  95         ATA_BMDMA_SHT(DRV_NAME),
  96 };
  97
  98 static struct ata_port_operations generic_port_ops = {
  99         .inherits       = &ata_bmdma_port_ops,
 100         .cable_detect   = ata_cable_unknown,
 101         .set_mode       = generic_set_mode,
 102 };
 103
 104 static int all_generic_ide;             /* Set to claim all devices */
 105
 106 /**
 107  *      ata_generic_init                -       attach generic IDE
 108  *      @dev: PCI device found
 109  *      @id: match entry
 110  *
 111  *      Called each time a matching IDE interface is found. We check if the
 112  *      interface is one we wish to claim and if so we perform any chip
 113  *      specific hacks then let the ATA layer do the heavy lifting.
 114  */
 115
 116 static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 117 {
 118         u16 command;
 119         static const struct ata_port_info info = {
 120                 .flags = ATA_FLAG_SLAVE_POSS,
 121                 .pio_mask = 0x1f,
 122                 .mwdma_mask = 0x07,
 123                 .udma_mask = ATA_UDMA5,
 124                 .port_ops = &generic_port_ops
 125         };
 126         const struct ata_port_info *ppi[] = { &info, NULL };
 127
 128         /* Don't use the generic entry unless instructed to do so */
 129         if (id->driver_data == 1 && all_generic_ide == 0)
 130                 return -ENODEV;
 131
 132         /* Devices that need care */
 133         if (dev->vendor == PCI_VENDOR_ID_UMC &&
 134             dev->device == PCI_DEVICE_ID_UMC_UM8886A &&
 135             (!(PCI_FUNC(dev->devfn) & 1)))
 136                 return -ENODEV;
 137
 138         if (dev->vendor == PCI_VENDOR_ID_OPTI &&
 139             dev->device == PCI_DEVICE_ID_OPTI_82C558 &&
 140             (!(PCI_FUNC(dev->devfn) & 1)))
 141                 return -ENODEV;
 142
 143         /* Don't re-enable devices in generic mode or we will break some
 144            motherboards with disabled and unused IDE controllers */
 145         pci_read_config_word(dev, PCI_COMMAND, &command);
 146         if (!(command & PCI_COMMAND_IO))
 147                 return -ENODEV;
 148
 149         if (dev->vendor == PCI_VENDOR_ID_AL)
 150                 ata_pci_bmdma_clear_simplex(dev);
 151
 152         if (dev->vendor == PCI_VENDOR_ID_ATI) {
 153                 int rc = pcim_enable_device(dev);
 154                 if (rc < 0)
 155                         return rc;
 156                 pcim_pin_device(dev);
 157         }
 158         return ata_pci_sff_init_one(dev, ppi, &generic_sht, NULL);
 159 }
 160
 161 static struct pci_device_id ata_generic[] = {
 162         { PCI_DEVICE(PCI_VENDOR_ID_PCTECH, PCI_DEVICE_ID_PCTECH_SAMURAI_IDE), },
 163         { PCI_DEVICE(PCI_VENDOR_ID_HOLTEK, PCI_DEVICE_ID_HOLTEK_6565), },
 164         { PCI_DEVICE(PCI_VENDOR_ID_UMC,    PCI_DEVICE_ID_UMC_UM8673F), },
 165         { PCI_DEVICE(PCI_VENDOR_ID_UMC,    PCI_DEVICE_ID_UMC_UM8886A), },
 166         { PCI_DEVICE(PCI_VENDOR_ID_UMC,    PCI_DEVICE_ID_UMC_UM8886BF), },
 167         { PCI_DEVICE(PCI_VENDOR_ID_HINT,   PCI_DEVICE_ID_HINT_VXPROII_IDE), },
 168         { PCI_DEVICE(PCI_VENDOR_ID_VIA,    PCI_DEVICE_ID_VIA_82C561), },
 169         { PCI_DEVICE(PCI_VENDOR_ID_OPTI,   PCI_DEVICE_ID_OPTI_82C558), },
 170         { PCI_DEVICE(PCI_VENDOR_ID_CENATEK,PCI_DEVICE_ID_CENATEK_IDE), },
 171         { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO), },
 172         { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1), },
 173         { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2),  },
 174         /* Must come last. If you add entries adjust this table appropriately */
 175         { PCI_ANY_ID,           PCI_ANY_ID,                        PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 1},
 176         { 0, },
 177 };
 178
 179 static struct pci_driver ata_generic_pci_driver = {
 180         .name           = DRV_NAME,
 181         .id_table       = ata_generic,
 182         .probe          = ata_generic_init_one,
 183         .remove         = ata_pci_remove_one,
 184 #ifdef CONFIG_PM
 185         .suspend        = ata_pci_device_suspend,
 186         .resume         = ata_pci_device_resume,
 187 #endif
 188 };
 189
 190 static int __init ata_generic_init(void)
 191 {
 192         return pci_register_driver(&ata_generic_pci_driver);
 193 }
 194
 195
 196 static void __exit ata_generic_exit(void)
 197 {
 198         pci_unregister_driver(&ata_generic_pci_driver);
 199 }
 200
 201
 202 MODULE_AUTHOR("Alan Cox");
 203 MODULE_DESCRIPTION("low-level driver for generic ATA");
 204 MODULE_LICENSE("GPL");
 205 MODULE_DEVICE_TABLE(pci, ata_generic);
 206 MODULE_VERSION(DRV_VERSION);
 207
 208 module_init(ata_generic_init);
 209 module_exit(ata_generic_exit);
 210
 211 module_param(all_generic_ide, int, 0);