1 /*****************************************************************************/
4 * stallion.c -- stallion multiport serial driver.
6 * Copyright (C) 1996-1999 Stallion Technologies
7 * Copyright (C) 1994-1996 Greg Ungerer.
9 * This code is loosely based on the Linux serial driver, written by
10 * Linus Torvalds, Theodore T'so and others.
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License as published by
14 * the Free Software Foundation; either version 2 of the License, or
15 * (at your option) any later version.
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
27 /*****************************************************************************/
29 #include <linux/module.h>
30 #include <linux/slab.h>
31 #include <linux/interrupt.h>
32 #include <linux/tty.h>
33 #include <linux/tty_flip.h>
34 #include <linux/serial.h>
35 #include <linux/cd1400.h>
36 #include <linux/sc26198.h>
37 #include <linux/comstats.h>
38 #include <linux/stallion.h>
39 #include <linux/ioport.h>
40 #include <linux/init.h>
41 #include <linux/smp_lock.h>
42 #include <linux/device.h>
43 #include <linux/delay.h>
44 #include <linux/ctype.h>
47 #include <asm/uaccess.h>
49 #include <linux/pci.h>
51 /*****************************************************************************/
54 * Define different board types. Use the standard Stallion "assigned"
55 * board numbers. Boards supported in this driver are abbreviated as
56 * EIO = EasyIO and ECH = EasyConnection 8/32.
62 #define BRD_ECH64PCI 27
63 #define BRD_EASYIOPCI 28
69 unsigned long memaddr
;
74 static unsigned int stl_nrbrds
;
76 /*****************************************************************************/
79 * Define some important driver characteristics. Device major numbers
80 * allocated as per Linux Device Registry.
82 #ifndef STL_SIOMEMMAJOR
83 #define STL_SIOMEMMAJOR 28
85 #ifndef STL_SERIALMAJOR
86 #define STL_SERIALMAJOR 24
88 #ifndef STL_CALLOUTMAJOR
89 #define STL_CALLOUTMAJOR 25
93 * Set the TX buffer size. Bigger is better, but we don't want
94 * to chew too much memory with buffers!
96 #define STL_TXBUFLOW 512
97 #define STL_TXBUFSIZE 4096
99 /*****************************************************************************/
102 * Define our local driver identity first. Set up stuff to deal with
103 * all the local structures required by a serial tty driver.
105 static char *stl_drvtitle
= "Stallion Multiport Serial Driver";
106 static char *stl_drvname
= "stallion";
107 static char *stl_drvversion
= "5.6.0";
109 static struct tty_driver
*stl_serial
;
112 * Define a local default termios struct. All ports will be created
113 * with this termios initially. Basically all it defines is a raw port
114 * at 9600, 8 data bits, 1 stop bit.
116 static struct ktermios stl_deftermios
= {
117 .c_cflag
= (B9600
| CS8
| CREAD
| HUPCL
| CLOCAL
),
124 * Define global place to put buffer overflow characters.
126 static char stl_unwanted
[SC26198_RXFIFOSIZE
];
128 /*****************************************************************************/
130 static DEFINE_MUTEX(stl_brdslock
);
131 static struct stlbrd
*stl_brds
[STL_MAXBRDS
];
134 * Per board state flags. Used with the state field of the board struct.
135 * Not really much here!
137 #define BRD_FOUND 0x1
138 #define STL_PROBED 0x2
142 * Define the port structure istate flags. These set of flags are
143 * modified at interrupt time - so setting and reseting them needs
144 * to be atomic. Use the bit clear/setting routines for this.
146 #define ASYI_TXBUSY 1
148 #define ASYI_TXFLOWED 3
151 * Define an array of board names as printable strings. Handy for
152 * referencing boards when printing trace and stuff.
154 static char *stl_brdnames
[] = {
186 /*****************************************************************************/
189 * Define some string labels for arguments passed from the module
190 * load line. These allow for easy board definitions, and easy
191 * modification of the io, memory and irq resoucres.
193 static unsigned int stl_nargs
;
194 static char *board0
[4];
195 static char *board1
[4];
196 static char *board2
[4];
197 static char *board3
[4];
199 static char **stl_brdsp
[] = {
207 * Define a set of common board names, and types. This is used to
208 * parse any module arguments.
215 { "easyio", BRD_EASYIO
},
216 { "eio", BRD_EASYIO
},
217 { "20", BRD_EASYIO
},
218 { "ec8/32", BRD_ECH
},
219 { "ec8/32-at", BRD_ECH
},
220 { "ec8/32-isa", BRD_ECH
},
222 { "echat", BRD_ECH
},
224 { "ec8/32-mc", BRD_ECHMC
},
225 { "ec8/32-mca", BRD_ECHMC
},
226 { "echmc", BRD_ECHMC
},
227 { "echmca", BRD_ECHMC
},
229 { "ec8/32-pc", BRD_ECHPCI
},
230 { "ec8/32-pci", BRD_ECHPCI
},
231 { "26", BRD_ECHPCI
},
232 { "ec8/64-pc", BRD_ECH64PCI
},
233 { "ec8/64-pci", BRD_ECH64PCI
},
234 { "ech-pci", BRD_ECH64PCI
},
235 { "echpci", BRD_ECH64PCI
},
236 { "echpc", BRD_ECH64PCI
},
237 { "27", BRD_ECH64PCI
},
238 { "easyio-pc", BRD_EASYIOPCI
},
239 { "easyio-pci", BRD_EASYIOPCI
},
240 { "eio-pci", BRD_EASYIOPCI
},
241 { "eiopci", BRD_EASYIOPCI
},
242 { "28", BRD_EASYIOPCI
},
246 * Define the module agruments.
249 module_param_array(board0
, charp
, &stl_nargs
, 0);
250 MODULE_PARM_DESC(board0
, "Board 0 config -> name[,ioaddr[,ioaddr2][,irq]]");
251 module_param_array(board1
, charp
, &stl_nargs
, 0);
252 MODULE_PARM_DESC(board1
, "Board 1 config -> name[,ioaddr[,ioaddr2][,irq]]");
253 module_param_array(board2
, charp
, &stl_nargs
, 0);
254 MODULE_PARM_DESC(board2
, "Board 2 config -> name[,ioaddr[,ioaddr2][,irq]]");
255 module_param_array(board3
, charp
, &stl_nargs
, 0);
256 MODULE_PARM_DESC(board3
, "Board 3 config -> name[,ioaddr[,ioaddr2][,irq]]");
258 /*****************************************************************************/
261 * Hardware ID bits for the EasyIO and ECH boards. These defines apply
262 * to the directly accessible io ports of these boards (not the uarts -
263 * they are in cd1400.h and sc26198.h).
265 #define EIO_8PORTRS 0x04
266 #define EIO_4PORTRS 0x05
267 #define EIO_8PORTDI 0x00
268 #define EIO_8PORTM 0x06
270 #define EIO_IDBITMASK 0x07
272 #define EIO_BRDMASK 0xf0
275 #define ID_BRD16 0x30
277 #define EIO_INTRPEND 0x08
278 #define EIO_INTEDGE 0x00
279 #define EIO_INTLEVEL 0x08
283 #define ECH_IDBITMASK 0xe0
284 #define ECH_BRDENABLE 0x08
285 #define ECH_BRDDISABLE 0x00
286 #define ECH_INTENABLE 0x01
287 #define ECH_INTDISABLE 0x00
288 #define ECH_INTLEVEL 0x02
289 #define ECH_INTEDGE 0x00
290 #define ECH_INTRPEND 0x01
291 #define ECH_BRDRESET 0x01
293 #define ECHMC_INTENABLE 0x01
294 #define ECHMC_BRDRESET 0x02
296 #define ECH_PNLSTATUS 2
297 #define ECH_PNL16PORT 0x20
298 #define ECH_PNLIDMASK 0x07
299 #define ECH_PNLXPID 0x40
300 #define ECH_PNLINTRPEND 0x80
302 #define ECH_ADDR2MASK 0x1e0
305 * Define the vector mapping bits for the programmable interrupt board
306 * hardware. These bits encode the interrupt for the board to use - it
307 * is software selectable (except the EIO-8M).
309 static unsigned char stl_vecmap
[] = {
310 0xff, 0xff, 0xff, 0x04, 0x06, 0x05, 0xff, 0x07,
311 0xff, 0xff, 0x00, 0x02, 0x01, 0xff, 0xff, 0x03
315 * Lock ordering is that you may not take stallion_lock holding
319 static spinlock_t brd_lock
; /* Guard the board mapping */
320 static spinlock_t stallion_lock
; /* Guard the tty driver */
323 * Set up enable and disable macros for the ECH boards. They require
324 * the secondary io address space to be activated and deactivated.
325 * This way all ECH boards can share their secondary io region.
326 * If this is an ECH-PCI board then also need to set the page pointer
327 * to point to the correct page.
329 #define BRDENABLE(brdnr,pagenr) \
330 if (stl_brds[(brdnr)]->brdtype == BRD_ECH) \
331 outb((stl_brds[(brdnr)]->ioctrlval | ECH_BRDENABLE), \
332 stl_brds[(brdnr)]->ioctrl); \
333 else if (stl_brds[(brdnr)]->brdtype == BRD_ECHPCI) \
334 outb((pagenr), stl_brds[(brdnr)]->ioctrl);
336 #define BRDDISABLE(brdnr) \
337 if (stl_brds[(brdnr)]->brdtype == BRD_ECH) \
338 outb((stl_brds[(brdnr)]->ioctrlval | ECH_BRDDISABLE), \
339 stl_brds[(brdnr)]->ioctrl);
341 #define STL_CD1400MAXBAUD 230400
342 #define STL_SC26198MAXBAUD 460800
344 #define STL_BAUDBASE 115200
345 #define STL_CLOSEDELAY (5 * HZ / 10)
347 /*****************************************************************************/
350 * Define the Stallion PCI vendor and device IDs.
352 #ifndef PCI_VENDOR_ID_STALLION
353 #define PCI_VENDOR_ID_STALLION 0x124d
355 #ifndef PCI_DEVICE_ID_ECHPCI832
356 #define PCI_DEVICE_ID_ECHPCI832 0x0000
358 #ifndef PCI_DEVICE_ID_ECHPCI864
359 #define PCI_DEVICE_ID_ECHPCI864 0x0002
361 #ifndef PCI_DEVICE_ID_EIOPCI
362 #define PCI_DEVICE_ID_EIOPCI 0x0003
366 * Define structure to hold all Stallion PCI boards.
369 static struct pci_device_id stl_pcibrds
[] = {
370 { PCI_DEVICE(PCI_VENDOR_ID_STALLION
, PCI_DEVICE_ID_ECHPCI864
),
371 .driver_data
= BRD_ECH64PCI
},
372 { PCI_DEVICE(PCI_VENDOR_ID_STALLION
, PCI_DEVICE_ID_EIOPCI
),
373 .driver_data
= BRD_EASYIOPCI
},
374 { PCI_DEVICE(PCI_VENDOR_ID_STALLION
, PCI_DEVICE_ID_ECHPCI832
),
375 .driver_data
= BRD_ECHPCI
},
376 { PCI_DEVICE(PCI_VENDOR_ID_NS
, PCI_DEVICE_ID_NS_87410
),
377 .driver_data
= BRD_ECHPCI
},
380 MODULE_DEVICE_TABLE(pci
, stl_pcibrds
);
382 /*****************************************************************************/
385 * Define macros to extract a brd/port number from a minor number.
387 #define MINOR2BRD(min) (((min) & 0xc0) >> 6)
388 #define MINOR2PORT(min) ((min) & 0x3f)
391 * Define a baud rate table that converts termios baud rate selector
392 * into the actual baud rate value. All baud rate calculations are
393 * based on the actual baud rate required.
395 static unsigned int stl_baudrates
[] = {
396 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
397 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600
400 /*****************************************************************************/
403 * Declare all those functions in this driver!
406 static int stl_memioctl(struct inode
*ip
, struct file
*fp
, unsigned int cmd
, unsigned long arg
);
407 static int stl_brdinit(struct stlbrd
*brdp
);
408 static int stl_getportstats(struct stlport
*portp
, comstats_t __user
*cp
);
409 static int stl_clrportstats(struct stlport
*portp
, comstats_t __user
*cp
);
410 static int stl_waitcarrier(struct stlport
*portp
, struct file
*filp
);
413 * CD1400 uart specific handling functions.
415 static void stl_cd1400setreg(struct stlport
*portp
, int regnr
, int value
);
416 static int stl_cd1400getreg(struct stlport
*portp
, int regnr
);
417 static int stl_cd1400updatereg(struct stlport
*portp
, int regnr
, int value
);
418 static int stl_cd1400panelinit(struct stlbrd
*brdp
, struct stlpanel
*panelp
);
419 static void stl_cd1400portinit(struct stlbrd
*brdp
, struct stlpanel
*panelp
, struct stlport
*portp
);
420 static void stl_cd1400setport(struct stlport
*portp
, struct ktermios
*tiosp
);
421 static int stl_cd1400getsignals(struct stlport
*portp
);
422 static void stl_cd1400setsignals(struct stlport
*portp
, int dtr
, int rts
);
423 static void stl_cd1400ccrwait(struct stlport
*portp
);
424 static void stl_cd1400enablerxtx(struct stlport
*portp
, int rx
, int tx
);
425 static void stl_cd1400startrxtx(struct stlport
*portp
, int rx
, int tx
);
426 static void stl_cd1400disableintrs(struct stlport
*portp
);
427 static void stl_cd1400sendbreak(struct stlport
*portp
, int len
);
428 static void stl_cd1400flowctrl(struct stlport
*portp
, int state
);
429 static void stl_cd1400sendflow(struct stlport
*portp
, int state
);
430 static void stl_cd1400flush(struct stlport
*portp
);
431 static int stl_cd1400datastate(struct stlport
*portp
);
432 static void stl_cd1400eiointr(struct stlpanel
*panelp
, unsigned int iobase
);
433 static void stl_cd1400echintr(struct stlpanel
*panelp
, unsigned int iobase
);
434 static void stl_cd1400txisr(struct stlpanel
*panelp
, int ioaddr
);
435 static void stl_cd1400rxisr(struct stlpanel
*panelp
, int ioaddr
);
436 static void stl_cd1400mdmisr(struct stlpanel
*panelp
, int ioaddr
);
438 static inline int stl_cd1400breakisr(struct stlport
*portp
, int ioaddr
);
441 * SC26198 uart specific handling functions.
443 static void stl_sc26198setreg(struct stlport
*portp
, int regnr
, int value
);
444 static int stl_sc26198getreg(struct stlport
*portp
, int regnr
);
445 static int stl_sc26198updatereg(struct stlport
*portp
, int regnr
, int value
);
446 static int stl_sc26198getglobreg(struct stlport
*portp
, int regnr
);
447 static int stl_sc26198panelinit(struct stlbrd
*brdp
, struct stlpanel
*panelp
);
448 static void stl_sc26198portinit(struct stlbrd
*brdp
, struct stlpanel
*panelp
, struct stlport
*portp
);
449 static void stl_sc26198setport(struct stlport
*portp
, struct ktermios
*tiosp
);
450 static int stl_sc26198getsignals(struct stlport
*portp
);
451 static void stl_sc26198setsignals(struct stlport
*portp
, int dtr
, int rts
);
452 static void stl_sc26198enablerxtx(struct stlport
*portp
, int rx
, int tx
);
453 static void stl_sc26198startrxtx(struct stlport
*portp
, int rx
, int tx
);
454 static void stl_sc26198disableintrs(struct stlport
*portp
);
455 static void stl_sc26198sendbreak(struct stlport
*portp
, int len
);
456 static void stl_sc26198flowctrl(struct stlport
*portp
, int state
);
457 static void stl_sc26198sendflow(struct stlport
*portp
, int state
);
458 static void stl_sc26198flush(struct stlport
*portp
);
459 static int stl_sc26198datastate(struct stlport
*portp
);
460 static void stl_sc26198wait(struct stlport
*portp
);
461 static void stl_sc26198txunflow(struct stlport
*portp
, struct tty_struct
*tty
);
462 static void stl_sc26198intr(struct stlpanel
*panelp
, unsigned int iobase
);
463 static void stl_sc26198txisr(struct stlport
*port
);
464 static void stl_sc26198rxisr(struct stlport
*port
, unsigned int iack
);
465 static void stl_sc26198rxbadch(struct stlport
*portp
, unsigned char status
, char ch
);
466 static void stl_sc26198rxbadchars(struct stlport
*portp
);
467 static void stl_sc26198otherisr(struct stlport
*port
, unsigned int iack
);
469 /*****************************************************************************/
472 * Generic UART support structure.
474 typedef struct uart
{
475 int (*panelinit
)(struct stlbrd
*brdp
, struct stlpanel
*panelp
);
476 void (*portinit
)(struct stlbrd
*brdp
, struct stlpanel
*panelp
, struct stlport
*portp
);
477 void (*setport
)(struct stlport
*portp
, struct ktermios
*tiosp
);
478 int (*getsignals
)(struct stlport
*portp
);
479 void (*setsignals
)(struct stlport
*portp
, int dtr
, int rts
);
480 void (*enablerxtx
)(struct stlport
*portp
, int rx
, int tx
);
481 void (*startrxtx
)(struct stlport
*portp
, int rx
, int tx
);
482 void (*disableintrs
)(struct stlport
*portp
);
483 void (*sendbreak
)(struct stlport
*portp
, int len
);
484 void (*flowctrl
)(struct stlport
*portp
, int state
);
485 void (*sendflow
)(struct stlport
*portp
, int state
);
486 void (*flush
)(struct stlport
*portp
);
487 int (*datastate
)(struct stlport
*portp
);
488 void (*intr
)(struct stlpanel
*panelp
, unsigned int iobase
);
492 * Define some macros to make calling these functions nice and clean.
494 #define stl_panelinit (* ((uart_t *) panelp->uartp)->panelinit)
495 #define stl_portinit (* ((uart_t *) portp->uartp)->portinit)
496 #define stl_setport (* ((uart_t *) portp->uartp)->setport)
497 #define stl_getsignals (* ((uart_t *) portp->uartp)->getsignals)
498 #define stl_setsignals (* ((uart_t *) portp->uartp)->setsignals)
499 #define stl_enablerxtx (* ((uart_t *) portp->uartp)->enablerxtx)
500 #define stl_startrxtx (* ((uart_t *) portp->uartp)->startrxtx)
501 #define stl_disableintrs (* ((uart_t *) portp->uartp)->disableintrs)
502 #define stl_sendbreak (* ((uart_t *) portp->uartp)->sendbreak)
503 #define stl_flowctrl (* ((uart_t *) portp->uartp)->flowctrl)
504 #define stl_sendflow (* ((uart_t *) portp->uartp)->sendflow)
505 #define stl_flush (* ((uart_t *) portp->uartp)->flush)
506 #define stl_datastate (* ((uart_t *) portp->uartp)->datastate)
508 /*****************************************************************************/
511 * CD1400 UART specific data initialization.
513 static uart_t stl_cd1400uart
= {
517 stl_cd1400getsignals
,
518 stl_cd1400setsignals
,
519 stl_cd1400enablerxtx
,
521 stl_cd1400disableintrs
,
531 * Define the offsets within the register bank of a cd1400 based panel.
532 * These io address offsets are common to the EasyIO board as well.
540 #define EREG_BANKSIZE 8
542 #define CD1400_CLK 25000000
543 #define CD1400_CLK8M 20000000
546 * Define the cd1400 baud rate clocks. These are used when calculating
547 * what clock and divisor to use for the required baud rate. Also
548 * define the maximum baud rate allowed, and the default base baud.
550 static int stl_cd1400clkdivs
[] = {
551 CD1400_CLK0
, CD1400_CLK1
, CD1400_CLK2
, CD1400_CLK3
, CD1400_CLK4
554 /*****************************************************************************/
557 * SC26198 UART specific data initization.
559 static uart_t stl_sc26198uart
= {
560 stl_sc26198panelinit
,
563 stl_sc26198getsignals
,
564 stl_sc26198setsignals
,
565 stl_sc26198enablerxtx
,
566 stl_sc26198startrxtx
,
567 stl_sc26198disableintrs
,
568 stl_sc26198sendbreak
,
572 stl_sc26198datastate
,
577 * Define the offsets within the register bank of a sc26198 based panel.
585 #define XP_BANKSIZE 4
588 * Define the sc26198 baud rate table. Offsets within the table
589 * represent the actual baud rate selector of sc26198 registers.
591 static unsigned int sc26198_baudtable
[] = {
592 50, 75, 150, 200, 300, 450, 600, 900, 1200, 1800, 2400, 3600,
593 4800, 7200, 9600, 14400, 19200, 28800, 38400, 57600, 115200,
594 230400, 460800, 921600
597 #define SC26198_NRBAUDS ARRAY_SIZE(sc26198_baudtable)
599 /*****************************************************************************/
602 * Define the driver info for a user level control device. Used mainly
603 * to get at port stats - only not using the port device itself.
605 static const struct file_operations stl_fsiomem
= {
606 .owner
= THIS_MODULE
,
607 .ioctl
= stl_memioctl
,
610 static struct class *stallion_class
;
612 static void stl_cd_change(struct stlport
*portp
)
614 unsigned int oldsigs
= portp
->sigs
;
619 portp
->sigs
= stl_getsignals(portp
);
621 if ((portp
->sigs
& TIOCM_CD
) && ((oldsigs
& TIOCM_CD
) == 0))
622 wake_up_interruptible(&portp
->open_wait
);
624 if ((oldsigs
& TIOCM_CD
) && ((portp
->sigs
& TIOCM_CD
) == 0))
625 if (portp
->flags
& ASYNC_CHECK_CD
)
626 tty_hangup(portp
->tty
);
630 * Check for any arguments passed in on the module load command line.
633 /*****************************************************************************/
636 * Parse the supplied argument string, into the board conf struct.
639 static int __init
stl_parsebrd(struct stlconf
*confp
, char **argp
)
644 pr_debug("stl_parsebrd(confp=%p,argp=%p)\n", confp
, argp
);
646 if ((argp
[0] == NULL
) || (*argp
[0] == 0))
649 for (sp
= argp
[0], i
= 0; (*sp
!= 0) && (i
< 25); sp
++, i
++)
652 for (i
= 0; i
< ARRAY_SIZE(stl_brdstr
); i
++)
653 if (strcmp(stl_brdstr
[i
].name
, argp
[0]) == 0)
656 if (i
== ARRAY_SIZE(stl_brdstr
)) {
657 printk("STALLION: unknown board name, %s?\n", argp
[0]);
661 confp
->brdtype
= stl_brdstr
[i
].type
;
664 if ((argp
[i
] != NULL
) && (*argp
[i
] != 0))
665 confp
->ioaddr1
= simple_strtoul(argp
[i
], NULL
, 0);
667 if (confp
->brdtype
== BRD_ECH
) {
668 if ((argp
[i
] != NULL
) && (*argp
[i
] != 0))
669 confp
->ioaddr2
= simple_strtoul(argp
[i
], NULL
, 0);
672 if ((argp
[i
] != NULL
) && (*argp
[i
] != 0))
673 confp
->irq
= simple_strtoul(argp
[i
], NULL
, 0);
677 /*****************************************************************************/
680 * Allocate a new board structure. Fill out the basic info in it.
683 static struct stlbrd
*stl_allocbrd(void)
687 brdp
= kzalloc(sizeof(struct stlbrd
), GFP_KERNEL
);
689 printk("STALLION: failed to allocate memory (size=%Zd)\n",
690 sizeof(struct stlbrd
));
694 brdp
->magic
= STL_BOARDMAGIC
;
698 /*****************************************************************************/
700 static int stl_open(struct tty_struct
*tty
, struct file
*filp
)
702 struct stlport
*portp
;
704 unsigned int minordev
, brdnr
, panelnr
;
707 pr_debug("stl_open(tty=%p,filp=%p): device=%s\n", tty
, filp
, tty
->name
);
709 minordev
= tty
->index
;
710 brdnr
= MINOR2BRD(minordev
);
711 if (brdnr
>= stl_nrbrds
)
713 brdp
= stl_brds
[brdnr
];
716 minordev
= MINOR2PORT(minordev
);
717 for (portnr
= -1, panelnr
= 0; panelnr
< STL_MAXPANELS
; panelnr
++) {
718 if (brdp
->panels
[panelnr
] == NULL
)
720 if (minordev
< brdp
->panels
[panelnr
]->nrports
) {
724 minordev
-= brdp
->panels
[panelnr
]->nrports
;
729 portp
= brdp
->panels
[panelnr
]->ports
[portnr
];
734 * On the first open of the device setup the port hardware, and
735 * initialize the per port data structure.
738 tty
->driver_data
= portp
;
741 if ((portp
->flags
& ASYNC_INITIALIZED
) == 0) {
742 if (!portp
->tx
.buf
) {
743 portp
->tx
.buf
= kmalloc(STL_TXBUFSIZE
, GFP_KERNEL
);
746 portp
->tx
.head
= portp
->tx
.buf
;
747 portp
->tx
.tail
= portp
->tx
.buf
;
749 stl_setport(portp
, tty
->termios
);
750 portp
->sigs
= stl_getsignals(portp
);
751 stl_setsignals(portp
, 1, 1);
752 stl_enablerxtx(portp
, 1, 1);
753 stl_startrxtx(portp
, 1, 0);
754 clear_bit(TTY_IO_ERROR
, &tty
->flags
);
755 portp
->flags
|= ASYNC_INITIALIZED
;
759 * Check if this port is in the middle of closing. If so then wait
760 * until it is closed then return error status, based on flag settings.
761 * The sleep here does not need interrupt protection since the wakeup
762 * for it is done with the same context.
764 if (portp
->flags
& ASYNC_CLOSING
) {
765 interruptible_sleep_on(&portp
->close_wait
);
766 if (portp
->flags
& ASYNC_HUP_NOTIFY
)
772 * Based on type of open being done check if it can overlap with any
773 * previous opens still in effect. If we are a normal serial device
774 * then also we might have to wait for carrier.
776 if (!(filp
->f_flags
& O_NONBLOCK
))
777 if ((rc
= stl_waitcarrier(portp
, filp
)) != 0)
780 portp
->flags
|= ASYNC_NORMAL_ACTIVE
;
785 /*****************************************************************************/
788 * Possibly need to wait for carrier (DCD signal) to come high. Say
789 * maybe because if we are clocal then we don't need to wait...
792 static int stl_waitcarrier(struct stlport
*portp
, struct file
*filp
)
797 pr_debug("stl_waitcarrier(portp=%p,filp=%p)\n", portp
, filp
);
802 spin_lock_irqsave(&stallion_lock
, flags
);
804 if (portp
->tty
->termios
->c_cflag
& CLOCAL
)
807 portp
->openwaitcnt
++;
808 if (! tty_hung_up_p(filp
))
812 /* Takes brd_lock internally */
813 stl_setsignals(portp
, 1, 1);
814 if (tty_hung_up_p(filp
) ||
815 ((portp
->flags
& ASYNC_INITIALIZED
) == 0)) {
816 if (portp
->flags
& ASYNC_HUP_NOTIFY
)
822 if (((portp
->flags
& ASYNC_CLOSING
) == 0) &&
823 (doclocal
|| (portp
->sigs
& TIOCM_CD
)))
825 if (signal_pending(current
)) {
830 interruptible_sleep_on(&portp
->open_wait
);
833 if (! tty_hung_up_p(filp
))
835 portp
->openwaitcnt
--;
836 spin_unlock_irqrestore(&stallion_lock
, flags
);
841 /*****************************************************************************/
843 static void stl_flushbuffer(struct tty_struct
*tty
)
845 struct stlport
*portp
;
847 pr_debug("stl_flushbuffer(tty=%p)\n", tty
);
851 portp
= tty
->driver_data
;
859 /*****************************************************************************/
861 static void stl_waituntilsent(struct tty_struct
*tty
, int timeout
)
863 struct stlport
*portp
;
866 pr_debug("stl_waituntilsent(tty=%p,timeout=%d)\n", tty
, timeout
);
870 portp
= tty
->driver_data
;
876 tend
= jiffies
+ timeout
;
878 while (stl_datastate(portp
)) {
879 if (signal_pending(current
))
881 msleep_interruptible(20);
882 if (time_after_eq(jiffies
, tend
))
887 /*****************************************************************************/
889 static void stl_close(struct tty_struct
*tty
, struct file
*filp
)
891 struct stlport
*portp
;
894 pr_debug("stl_close(tty=%p,filp=%p)\n", tty
, filp
);
896 portp
= tty
->driver_data
;
900 spin_lock_irqsave(&stallion_lock
, flags
);
901 if (tty_hung_up_p(filp
)) {
902 spin_unlock_irqrestore(&stallion_lock
, flags
);
905 if ((tty
->count
== 1) && (portp
->refcount
!= 1))
907 if (portp
->refcount
-- > 1) {
908 spin_unlock_irqrestore(&stallion_lock
, flags
);
913 portp
->flags
|= ASYNC_CLOSING
;
916 * May want to wait for any data to drain before closing. The BUSY
917 * flag keeps track of whether we are still sending or not - it is
918 * very accurate for the cd1400, not quite so for the sc26198.
919 * (The sc26198 has no "end-of-data" interrupt only empty FIFO)
923 spin_unlock_irqrestore(&stallion_lock
, flags
);
925 if (portp
->closing_wait
!= ASYNC_CLOSING_WAIT_NONE
)
926 tty_wait_until_sent(tty
, portp
->closing_wait
);
927 stl_waituntilsent(tty
, (HZ
/ 2));
930 spin_lock_irqsave(&stallion_lock
, flags
);
931 portp
->flags
&= ~ASYNC_INITIALIZED
;
932 spin_unlock_irqrestore(&stallion_lock
, flags
);
934 stl_disableintrs(portp
);
935 if (tty
->termios
->c_cflag
& HUPCL
)
936 stl_setsignals(portp
, 0, 0);
937 stl_enablerxtx(portp
, 0, 0);
938 stl_flushbuffer(tty
);
940 if (portp
->tx
.buf
!= NULL
) {
941 kfree(portp
->tx
.buf
);
942 portp
->tx
.buf
= NULL
;
943 portp
->tx
.head
= NULL
;
944 portp
->tx
.tail
= NULL
;
946 set_bit(TTY_IO_ERROR
, &tty
->flags
);
947 tty_ldisc_flush(tty
);
952 if (portp
->openwaitcnt
) {
953 if (portp
->close_delay
)
954 msleep_interruptible(jiffies_to_msecs(portp
->close_delay
));
955 wake_up_interruptible(&portp
->open_wait
);
958 portp
->flags
&= ~(ASYNC_NORMAL_ACTIVE
|ASYNC_CLOSING
);
959 wake_up_interruptible(&portp
->close_wait
);
962 /*****************************************************************************/
965 * Write routine. Take data and stuff it in to the TX ring queue.
966 * If transmit interrupts are not running then start them.
969 static int stl_write(struct tty_struct
*tty
, const unsigned char *buf
, int count
)
971 struct stlport
*portp
;
972 unsigned int len
, stlen
;
973 unsigned char *chbuf
;
976 pr_debug("stl_write(tty=%p,buf=%p,count=%d)\n", tty
, buf
, count
);
978 portp
= tty
->driver_data
;
981 if (portp
->tx
.buf
== NULL
)
985 * If copying direct from user space we must cater for page faults,
986 * causing us to "sleep" here for a while. To handle this copy in all
987 * the data we need now, into a local buffer. Then when we got it all
988 * copy it into the TX buffer.
990 chbuf
= (unsigned char *) buf
;
992 head
= portp
->tx
.head
;
993 tail
= portp
->tx
.tail
;
995 len
= STL_TXBUFSIZE
- (head
- tail
) - 1;
996 stlen
= STL_TXBUFSIZE
- (head
- portp
->tx
.buf
);
998 len
= tail
- head
- 1;
1002 len
= min(len
, (unsigned int)count
);
1005 stlen
= min(len
, stlen
);
1006 memcpy(head
, chbuf
, stlen
);
1011 if (head
>= (portp
->tx
.buf
+ STL_TXBUFSIZE
)) {
1012 head
= portp
->tx
.buf
;
1013 stlen
= tail
- head
;
1016 portp
->tx
.head
= head
;
1018 clear_bit(ASYI_TXLOW
, &portp
->istate
);
1019 stl_startrxtx(portp
, -1, 1);
1024 /*****************************************************************************/
1026 static void stl_putchar(struct tty_struct
*tty
, unsigned char ch
)
1028 struct stlport
*portp
;
1032 pr_debug("stl_putchar(tty=%p,ch=%x)\n", tty
, ch
);
1036 portp
= tty
->driver_data
;
1039 if (portp
->tx
.buf
== NULL
)
1042 head
= portp
->tx
.head
;
1043 tail
= portp
->tx
.tail
;
1045 len
= (head
>= tail
) ? (STL_TXBUFSIZE
- (head
- tail
)) : (tail
- head
);
1050 if (head
>= (portp
->tx
.buf
+ STL_TXBUFSIZE
))
1051 head
= portp
->tx
.buf
;
1053 portp
->tx
.head
= head
;
1056 /*****************************************************************************/
1059 * If there are any characters in the buffer then make sure that TX
1060 * interrupts are on and get'em out. Normally used after the putchar
1061 * routine has been called.
1064 static void stl_flushchars(struct tty_struct
*tty
)
1066 struct stlport
*portp
;
1068 pr_debug("stl_flushchars(tty=%p)\n", tty
);
1072 portp
= tty
->driver_data
;
1075 if (portp
->tx
.buf
== NULL
)
1078 stl_startrxtx(portp
, -1, 1);
1081 /*****************************************************************************/
1083 static int stl_writeroom(struct tty_struct
*tty
)
1085 struct stlport
*portp
;
1088 pr_debug("stl_writeroom(tty=%p)\n", tty
);
1092 portp
= tty
->driver_data
;
1095 if (portp
->tx
.buf
== NULL
)
1098 head
= portp
->tx
.head
;
1099 tail
= portp
->tx
.tail
;
1100 return (head
>= tail
) ? (STL_TXBUFSIZE
- (head
- tail
) - 1) : (tail
- head
- 1);
1103 /*****************************************************************************/
1106 * Return number of chars in the TX buffer. Normally we would just
1107 * calculate the number of chars in the buffer and return that, but if
1108 * the buffer is empty and TX interrupts are still on then we return
1109 * that the buffer still has 1 char in it. This way whoever called us
1110 * will not think that ALL chars have drained - since the UART still
1111 * must have some chars in it (we are busy after all).
1114 static int stl_charsinbuffer(struct tty_struct
*tty
)
1116 struct stlport
*portp
;
1120 pr_debug("stl_charsinbuffer(tty=%p)\n", tty
);
1124 portp
= tty
->driver_data
;
1127 if (portp
->tx
.buf
== NULL
)
1130 head
= portp
->tx
.head
;
1131 tail
= portp
->tx
.tail
;
1132 size
= (head
>= tail
) ? (head
- tail
) : (STL_TXBUFSIZE
- (tail
- head
));
1133 if ((size
== 0) && test_bit(ASYI_TXBUSY
, &portp
->istate
))
1138 /*****************************************************************************/
1141 * Generate the serial struct info.
1144 static int stl_getserial(struct stlport
*portp
, struct serial_struct __user
*sp
)
1146 struct serial_struct sio
;
1147 struct stlbrd
*brdp
;
1149 pr_debug("stl_getserial(portp=%p,sp=%p)\n", portp
, sp
);
1151 memset(&sio
, 0, sizeof(struct serial_struct
));
1152 sio
.line
= portp
->portnr
;
1153 sio
.port
= portp
->ioaddr
;
1154 sio
.flags
= portp
->flags
;
1155 sio
.baud_base
= portp
->baud_base
;
1156 sio
.close_delay
= portp
->close_delay
;
1157 sio
.closing_wait
= portp
->closing_wait
;
1158 sio
.custom_divisor
= portp
->custom_divisor
;
1160 if (portp
->uartp
== &stl_cd1400uart
) {
1161 sio
.type
= PORT_CIRRUS
;
1162 sio
.xmit_fifo_size
= CD1400_TXFIFOSIZE
;
1164 sio
.type
= PORT_UNKNOWN
;
1165 sio
.xmit_fifo_size
= SC26198_TXFIFOSIZE
;
1168 brdp
= stl_brds
[portp
->brdnr
];
1170 sio
.irq
= brdp
->irq
;
1172 return copy_to_user(sp
, &sio
, sizeof(struct serial_struct
)) ? -EFAULT
: 0;
1175 /*****************************************************************************/
1178 * Set port according to the serial struct info.
1179 * At this point we do not do any auto-configure stuff, so we will
1180 * just quietly ignore any requests to change irq, etc.
1183 static int stl_setserial(struct stlport
*portp
, struct serial_struct __user
*sp
)
1185 struct serial_struct sio
;
1187 pr_debug("stl_setserial(portp=%p,sp=%p)\n", portp
, sp
);
1189 if (copy_from_user(&sio
, sp
, sizeof(struct serial_struct
)))
1191 if (!capable(CAP_SYS_ADMIN
)) {
1192 if ((sio
.baud_base
!= portp
->baud_base
) ||
1193 (sio
.close_delay
!= portp
->close_delay
) ||
1194 ((sio
.flags
& ~ASYNC_USR_MASK
) !=
1195 (portp
->flags
& ~ASYNC_USR_MASK
)))
1199 portp
->flags
= (portp
->flags
& ~ASYNC_USR_MASK
) |
1200 (sio
.flags
& ASYNC_USR_MASK
);
1201 portp
->baud_base
= sio
.baud_base
;
1202 portp
->close_delay
= sio
.close_delay
;
1203 portp
->closing_wait
= sio
.closing_wait
;
1204 portp
->custom_divisor
= sio
.custom_divisor
;
1205 stl_setport(portp
, portp
->tty
->termios
);
1209 /*****************************************************************************/
1211 static int stl_tiocmget(struct tty_struct
*tty
, struct file
*file
)
1213 struct stlport
*portp
;
1217 portp
= tty
->driver_data
;
1220 if (tty
->flags
& (1 << TTY_IO_ERROR
))
1223 return stl_getsignals(portp
);
1226 static int stl_tiocmset(struct tty_struct
*tty
, struct file
*file
,
1227 unsigned int set
, unsigned int clear
)
1229 struct stlport
*portp
;
1230 int rts
= -1, dtr
= -1;
1234 portp
= tty
->driver_data
;
1237 if (tty
->flags
& (1 << TTY_IO_ERROR
))
1240 if (set
& TIOCM_RTS
)
1242 if (set
& TIOCM_DTR
)
1244 if (clear
& TIOCM_RTS
)
1246 if (clear
& TIOCM_DTR
)
1249 stl_setsignals(portp
, dtr
, rts
);
1253 static int stl_ioctl(struct tty_struct
*tty
, struct file
*file
, unsigned int cmd
, unsigned long arg
)
1255 struct stlport
*portp
;
1258 void __user
*argp
= (void __user
*)arg
;
1260 pr_debug("stl_ioctl(tty=%p,file=%p,cmd=%x,arg=%lx)\n", tty
, file
, cmd
,
1265 portp
= tty
->driver_data
;
1269 if ((cmd
!= TIOCGSERIAL
) && (cmd
!= TIOCSSERIAL
) &&
1270 (cmd
!= COM_GETPORTSTATS
) && (cmd
!= COM_CLRPORTSTATS
))
1271 if (tty
->flags
& (1 << TTY_IO_ERROR
))
1278 rc
= put_user(((tty
->termios
->c_cflag
& CLOCAL
) ? 1 : 0),
1279 (unsigned __user
*) argp
);
1282 if (get_user(ival
, (unsigned int __user
*) arg
))
1284 tty
->termios
->c_cflag
=
1285 (tty
->termios
->c_cflag
& ~CLOCAL
) |
1286 (ival
? CLOCAL
: 0);
1289 rc
= stl_getserial(portp
, argp
);
1292 rc
= stl_setserial(portp
, argp
);
1294 case COM_GETPORTSTATS
:
1295 rc
= stl_getportstats(portp
, argp
);
1297 case COM_CLRPORTSTATS
:
1298 rc
= stl_clrportstats(portp
, argp
);
1304 case TIOCSERGSTRUCT
:
1305 case TIOCSERGETMULTI
:
1306 case TIOCSERSETMULTI
:
1315 /*****************************************************************************/
1318 * Start the transmitter again. Just turn TX interrupts back on.
1321 static void stl_start(struct tty_struct
*tty
)
1323 struct stlport
*portp
;
1325 pr_debug("stl_start(tty=%p)\n", tty
);
1329 portp
= tty
->driver_data
;
1332 stl_startrxtx(portp
, -1, 1);
1335 /*****************************************************************************/
1337 static void stl_settermios(struct tty_struct
*tty
, struct ktermios
*old
)
1339 struct stlport
*portp
;
1340 struct ktermios
*tiosp
;
1342 pr_debug("stl_settermios(tty=%p,old=%p)\n", tty
, old
);
1346 portp
= tty
->driver_data
;
1350 tiosp
= tty
->termios
;
1351 if ((tiosp
->c_cflag
== old
->c_cflag
) &&
1352 (tiosp
->c_iflag
== old
->c_iflag
))
1355 stl_setport(portp
, tiosp
);
1356 stl_setsignals(portp
, ((tiosp
->c_cflag
& (CBAUD
& ~CBAUDEX
)) ? 1 : 0),
1358 if ((old
->c_cflag
& CRTSCTS
) && ((tiosp
->c_cflag
& CRTSCTS
) == 0)) {
1359 tty
->hw_stopped
= 0;
1362 if (((old
->c_cflag
& CLOCAL
) == 0) && (tiosp
->c_cflag
& CLOCAL
))
1363 wake_up_interruptible(&portp
->open_wait
);
1366 /*****************************************************************************/
1369 * Attempt to flow control who ever is sending us data. Based on termios
1370 * settings use software or/and hardware flow control.
1373 static void stl_throttle(struct tty_struct
*tty
)
1375 struct stlport
*portp
;
1377 pr_debug("stl_throttle(tty=%p)\n", tty
);
1381 portp
= tty
->driver_data
;
1384 stl_flowctrl(portp
, 0);
1387 /*****************************************************************************/
1390 * Unflow control the device sending us data...
1393 static void stl_unthrottle(struct tty_struct
*tty
)
1395 struct stlport
*portp
;
1397 pr_debug("stl_unthrottle(tty=%p)\n", tty
);
1401 portp
= tty
->driver_data
;
1404 stl_flowctrl(portp
, 1);
1407 /*****************************************************************************/
1410 * Stop the transmitter. Basically to do this we will just turn TX
1414 static void stl_stop(struct tty_struct
*tty
)
1416 struct stlport
*portp
;
1418 pr_debug("stl_stop(tty=%p)\n", tty
);
1422 portp
= tty
->driver_data
;
1425 stl_startrxtx(portp
, -1, 0);
1428 /*****************************************************************************/
1431 * Hangup this port. This is pretty much like closing the port, only
1432 * a little more brutal. No waiting for data to drain. Shutdown the
1433 * port and maybe drop signals.
1436 static void stl_hangup(struct tty_struct
*tty
)
1438 struct stlport
*portp
;
1440 pr_debug("stl_hangup(tty=%p)\n", tty
);
1444 portp
= tty
->driver_data
;
1448 portp
->flags
&= ~ASYNC_INITIALIZED
;
1449 stl_disableintrs(portp
);
1450 if (tty
->termios
->c_cflag
& HUPCL
)
1451 stl_setsignals(portp
, 0, 0);
1452 stl_enablerxtx(portp
, 0, 0);
1453 stl_flushbuffer(tty
);
1455 set_bit(TTY_IO_ERROR
, &tty
->flags
);
1456 if (portp
->tx
.buf
!= NULL
) {
1457 kfree(portp
->tx
.buf
);
1458 portp
->tx
.buf
= NULL
;
1459 portp
->tx
.head
= NULL
;
1460 portp
->tx
.tail
= NULL
;
1463 portp
->flags
&= ~ASYNC_NORMAL_ACTIVE
;
1464 portp
->refcount
= 0;
1465 wake_up_interruptible(&portp
->open_wait
);
1468 /*****************************************************************************/
1470 static void stl_breakctl(struct tty_struct
*tty
, int state
)
1472 struct stlport
*portp
;
1474 pr_debug("stl_breakctl(tty=%p,state=%d)\n", tty
, state
);
1478 portp
= tty
->driver_data
;
1482 stl_sendbreak(portp
, ((state
== -1) ? 1 : 2));
1485 /*****************************************************************************/
1487 static void stl_sendxchar(struct tty_struct
*tty
, char ch
)
1489 struct stlport
*portp
;
1491 pr_debug("stl_sendxchar(tty=%p,ch=%x)\n", tty
, ch
);
1495 portp
= tty
->driver_data
;
1499 if (ch
== STOP_CHAR(tty
))
1500 stl_sendflow(portp
, 0);
1501 else if (ch
== START_CHAR(tty
))
1502 stl_sendflow(portp
, 1);
1504 stl_putchar(tty
, ch
);
1507 /*****************************************************************************/
1512 * Format info for a specified port. The line is deliberately limited
1513 * to 80 characters. (If it is too long it will be truncated, if too
1514 * short then padded with spaces).
1517 static int stl_portinfo(struct stlport
*portp
, int portnr
, char *pos
)
1523 sp
+= sprintf(sp
, "%d: uart:%s tx:%d rx:%d",
1524 portnr
, (portp
->hwid
== 1) ? "SC26198" : "CD1400",
1525 (int) portp
->stats
.txtotal
, (int) portp
->stats
.rxtotal
);
1527 if (portp
->stats
.rxframing
)
1528 sp
+= sprintf(sp
, " fe:%d", (int) portp
->stats
.rxframing
);
1529 if (portp
->stats
.rxparity
)
1530 sp
+= sprintf(sp
, " pe:%d", (int) portp
->stats
.rxparity
);
1531 if (portp
->stats
.rxbreaks
)
1532 sp
+= sprintf(sp
, " brk:%d", (int) portp
->stats
.rxbreaks
);
1533 if (portp
->stats
.rxoverrun
)
1534 sp
+= sprintf(sp
, " oe:%d", (int) portp
->stats
.rxoverrun
);
1536 sigs
= stl_getsignals(portp
);
1537 cnt
= sprintf(sp
, "%s%s%s%s%s ",
1538 (sigs
& TIOCM_RTS
) ? "|RTS" : "",
1539 (sigs
& TIOCM_CTS
) ? "|CTS" : "",
1540 (sigs
& TIOCM_DTR
) ? "|DTR" : "",
1541 (sigs
& TIOCM_CD
) ? "|DCD" : "",
1542 (sigs
& TIOCM_DSR
) ? "|DSR" : "");
1546 for (cnt
= sp
- pos
; cnt
< (MAXLINE
- 1); cnt
++)
1549 pos
[(MAXLINE
- 2)] = '+';
1550 pos
[(MAXLINE
- 1)] = '\n';
1555 /*****************************************************************************/
1558 * Port info, read from the /proc file system.
1561 static int stl_readproc(char *page
, char **start
, off_t off
, int count
, int *eof
, void *data
)
1563 struct stlbrd
*brdp
;
1564 struct stlpanel
*panelp
;
1565 struct stlport
*portp
;
1566 unsigned int brdnr
, panelnr
, portnr
;
1567 int totalport
, curoff
, maxoff
;
1570 pr_debug("stl_readproc(page=%p,start=%p,off=%lx,count=%d,eof=%p,"
1571 "data=%p\n", page
, start
, off
, count
, eof
, data
);
1578 pos
+= sprintf(pos
, "%s: version %s", stl_drvtitle
,
1580 while (pos
< (page
+ MAXLINE
- 1))
1587 * We scan through for each board, panel and port. The offset is
1588 * calculated on the fly, and irrelevant ports are skipped.
1590 for (brdnr
= 0; brdnr
< stl_nrbrds
; brdnr
++) {
1591 brdp
= stl_brds
[brdnr
];
1594 if (brdp
->state
== 0)
1597 maxoff
= curoff
+ (brdp
->nrports
* MAXLINE
);
1598 if (off
>= maxoff
) {
1603 totalport
= brdnr
* STL_MAXPORTS
;
1604 for (panelnr
= 0; panelnr
< brdp
->nrpanels
; panelnr
++) {
1605 panelp
= brdp
->panels
[panelnr
];
1609 maxoff
= curoff
+ (panelp
->nrports
* MAXLINE
);
1610 if (off
>= maxoff
) {
1612 totalport
+= panelp
->nrports
;
1616 for (portnr
= 0; portnr
< panelp
->nrports
; portnr
++,
1618 portp
= panelp
->ports
[portnr
];
1621 if (off
>= (curoff
+= MAXLINE
))
1623 if ((pos
- page
+ MAXLINE
) > count
)
1625 pos
+= stl_portinfo(portp
, totalport
, pos
);
1637 /*****************************************************************************/
1640 * All board interrupts are vectored through here first. This code then
1641 * calls off to the approrpriate board interrupt handlers.
1644 static irqreturn_t
stl_intr(int irq
, void *dev_id
)
1646 struct stlbrd
*brdp
= dev_id
;
1648 pr_debug("stl_intr(brdp=%p,irq=%d)\n", brdp
, brdp
->irq
);
1650 return IRQ_RETVAL((* brdp
->isr
)(brdp
));
1653 /*****************************************************************************/
1656 * Interrupt service routine for EasyIO board types.
1659 static int stl_eiointr(struct stlbrd
*brdp
)
1661 struct stlpanel
*panelp
;
1662 unsigned int iobase
;
1665 spin_lock(&brd_lock
);
1666 panelp
= brdp
->panels
[0];
1667 iobase
= panelp
->iobase
;
1668 while (inb(brdp
->iostatus
) & EIO_INTRPEND
) {
1670 (* panelp
->isr
)(panelp
, iobase
);
1672 spin_unlock(&brd_lock
);
1676 /*****************************************************************************/
1679 * Interrupt service routine for ECH-AT board types.
1682 static int stl_echatintr(struct stlbrd
*brdp
)
1684 struct stlpanel
*panelp
;
1685 unsigned int ioaddr
, bnknr
;
1688 outb((brdp
->ioctrlval
| ECH_BRDENABLE
), brdp
->ioctrl
);
1690 while (inb(brdp
->iostatus
) & ECH_INTRPEND
) {
1692 for (bnknr
= 0; bnknr
< brdp
->nrbnks
; bnknr
++) {
1693 ioaddr
= brdp
->bnkstataddr
[bnknr
];
1694 if (inb(ioaddr
) & ECH_PNLINTRPEND
) {
1695 panelp
= brdp
->bnk2panel
[bnknr
];
1696 (* panelp
->isr
)(panelp
, (ioaddr
& 0xfffc));
1701 outb((brdp
->ioctrlval
| ECH_BRDDISABLE
), brdp
->ioctrl
);
1706 /*****************************************************************************/
1709 * Interrupt service routine for ECH-MCA board types.
1712 static int stl_echmcaintr(struct stlbrd
*brdp
)
1714 struct stlpanel
*panelp
;
1715 unsigned int ioaddr
, bnknr
;
1718 while (inb(brdp
->iostatus
) & ECH_INTRPEND
) {
1720 for (bnknr
= 0; bnknr
< brdp
->nrbnks
; bnknr
++) {
1721 ioaddr
= brdp
->bnkstataddr
[bnknr
];
1722 if (inb(ioaddr
) & ECH_PNLINTRPEND
) {
1723 panelp
= brdp
->bnk2panel
[bnknr
];
1724 (* panelp
->isr
)(panelp
, (ioaddr
& 0xfffc));
1731 /*****************************************************************************/
1734 * Interrupt service routine for ECH-PCI board types.
1737 static int stl_echpciintr(struct stlbrd
*brdp
)
1739 struct stlpanel
*panelp
;
1740 unsigned int ioaddr
, bnknr
, recheck
;
1745 for (bnknr
= 0; bnknr
< brdp
->nrbnks
; bnknr
++) {
1746 outb(brdp
->bnkpageaddr
[bnknr
], brdp
->ioctrl
);
1747 ioaddr
= brdp
->bnkstataddr
[bnknr
];
1748 if (inb(ioaddr
) & ECH_PNLINTRPEND
) {
1749 panelp
= brdp
->bnk2panel
[bnknr
];
1750 (* panelp
->isr
)(panelp
, (ioaddr
& 0xfffc));
1761 /*****************************************************************************/
1764 * Interrupt service routine for ECH-8/64-PCI board types.
1767 static int stl_echpci64intr(struct stlbrd
*brdp
)
1769 struct stlpanel
*panelp
;
1770 unsigned int ioaddr
, bnknr
;
1773 while (inb(brdp
->ioctrl
) & 0x1) {
1775 for (bnknr
= 0; bnknr
< brdp
->nrbnks
; bnknr
++) {
1776 ioaddr
= brdp
->bnkstataddr
[bnknr
];
1777 if (inb(ioaddr
) & ECH_PNLINTRPEND
) {
1778 panelp
= brdp
->bnk2panel
[bnknr
];
1779 (* panelp
->isr
)(panelp
, (ioaddr
& 0xfffc));
1787 /*****************************************************************************/
1790 * Initialize all the ports on a panel.
1793 static int __devinit
stl_initports(struct stlbrd
*brdp
, struct stlpanel
*panelp
)
1795 struct stlport
*portp
;
1799 pr_debug("stl_initports(brdp=%p,panelp=%p)\n", brdp
, panelp
);
1801 chipmask
= stl_panelinit(brdp
, panelp
);
1804 * All UART's are initialized (if found!). Now go through and setup
1805 * each ports data structures.
1807 for (i
= 0; i
< panelp
->nrports
; i
++) {
1808 portp
= kzalloc(sizeof(struct stlport
), GFP_KERNEL
);
1810 printk("STALLION: failed to allocate memory "
1811 "(size=%Zd)\n", sizeof(struct stlport
));
1815 portp
->magic
= STL_PORTMAGIC
;
1817 portp
->brdnr
= panelp
->brdnr
;
1818 portp
->panelnr
= panelp
->panelnr
;
1819 portp
->uartp
= panelp
->uartp
;
1820 portp
->clk
= brdp
->clk
;
1821 portp
->baud_base
= STL_BAUDBASE
;
1822 portp
->close_delay
= STL_CLOSEDELAY
;
1823 portp
->closing_wait
= 30 * HZ
;
1824 init_waitqueue_head(&portp
->open_wait
);
1825 init_waitqueue_head(&portp
->close_wait
);
1826 portp
->stats
.brd
= portp
->brdnr
;
1827 portp
->stats
.panel
= portp
->panelnr
;
1828 portp
->stats
.port
= portp
->portnr
;
1829 panelp
->ports
[i
] = portp
;
1830 stl_portinit(brdp
, panelp
, portp
);
1836 static void stl_cleanup_panels(struct stlbrd
*brdp
)
1838 struct stlpanel
*panelp
;
1839 struct stlport
*portp
;
1842 for (j
= 0; j
< STL_MAXPANELS
; j
++) {
1843 panelp
= brdp
->panels
[j
];
1846 for (k
= 0; k
< STL_PORTSPERPANEL
; k
++) {
1847 portp
= panelp
->ports
[k
];
1850 if (portp
->tty
!= NULL
)
1851 stl_hangup(portp
->tty
);
1852 kfree(portp
->tx
.buf
);
1859 /*****************************************************************************/
1862 * Try to find and initialize an EasyIO board.
1865 static int __devinit
stl_initeio(struct stlbrd
*brdp
)
1867 struct stlpanel
*panelp
;
1868 unsigned int status
;
1872 pr_debug("stl_initeio(brdp=%p)\n", brdp
);
1874 brdp
->ioctrl
= brdp
->ioaddr1
+ 1;
1875 brdp
->iostatus
= brdp
->ioaddr1
+ 2;
1877 status
= inb(brdp
->iostatus
);
1878 if ((status
& EIO_IDBITMASK
) == EIO_MK3
)
1882 * Handle board specific stuff now. The real difference is PCI
1885 if (brdp
->brdtype
== BRD_EASYIOPCI
) {
1886 brdp
->iosize1
= 0x80;
1887 brdp
->iosize2
= 0x80;
1888 name
= "serial(EIO-PCI)";
1889 outb(0x41, (brdp
->ioaddr2
+ 0x4c));
1892 name
= "serial(EIO)";
1893 if ((brdp
->irq
< 0) || (brdp
->irq
> 15) ||
1894 (stl_vecmap
[brdp
->irq
] == (unsigned char) 0xff)) {
1895 printk("STALLION: invalid irq=%d for brd=%d\n",
1896 brdp
->irq
, brdp
->brdnr
);
1900 outb((stl_vecmap
[brdp
->irq
] | EIO_0WS
|
1901 ((brdp
->irqtype
) ? EIO_INTLEVEL
: EIO_INTEDGE
)),
1906 if (!request_region(brdp
->ioaddr1
, brdp
->iosize1
, name
)) {
1907 printk(KERN_WARNING
"STALLION: Warning, board %d I/O address "
1908 "%x conflicts with another device\n", brdp
->brdnr
,
1913 if (brdp
->iosize2
> 0)
1914 if (!request_region(brdp
->ioaddr2
, brdp
->iosize2
, name
)) {
1915 printk(KERN_WARNING
"STALLION: Warning, board %d I/O "
1916 "address %x conflicts with another device\n",
1917 brdp
->brdnr
, brdp
->ioaddr2
);
1918 printk(KERN_WARNING
"STALLION: Warning, also "
1919 "releasing board %d I/O address %x \n",
1920 brdp
->brdnr
, brdp
->ioaddr1
);
1925 * Everything looks OK, so let's go ahead and probe for the hardware.
1927 brdp
->clk
= CD1400_CLK
;
1928 brdp
->isr
= stl_eiointr
;
1931 switch (status
& EIO_IDBITMASK
) {
1933 brdp
->clk
= CD1400_CLK8M
;
1943 switch (status
& EIO_BRDMASK
) {
1962 * We have verified that the board is actually present, so now we
1963 * can complete the setup.
1966 panelp
= kzalloc(sizeof(struct stlpanel
), GFP_KERNEL
);
1968 printk(KERN_WARNING
"STALLION: failed to allocate memory "
1969 "(size=%Zd)\n", sizeof(struct stlpanel
));
1974 panelp
->magic
= STL_PANELMAGIC
;
1975 panelp
->brdnr
= brdp
->brdnr
;
1976 panelp
->panelnr
= 0;
1977 panelp
->nrports
= brdp
->nrports
;
1978 panelp
->iobase
= brdp
->ioaddr1
;
1979 panelp
->hwid
= status
;
1980 if ((status
& EIO_IDBITMASK
) == EIO_MK3
) {
1981 panelp
->uartp
= &stl_sc26198uart
;
1982 panelp
->isr
= stl_sc26198intr
;
1984 panelp
->uartp
= &stl_cd1400uart
;
1985 panelp
->isr
= stl_cd1400eiointr
;
1988 brdp
->panels
[0] = panelp
;
1990 brdp
->state
|= BRD_FOUND
;
1991 brdp
->hwid
= status
;
1992 if (request_irq(brdp
->irq
, stl_intr
, IRQF_SHARED
, name
, brdp
) != 0) {
1993 printk("STALLION: failed to register interrupt "
1994 "routine for %s irq=%d\n", name
, brdp
->irq
);
2001 stl_cleanup_panels(brdp
);
2003 if (brdp
->iosize2
> 0)
2004 release_region(brdp
->ioaddr2
, brdp
->iosize2
);
2006 release_region(brdp
->ioaddr1
, brdp
->iosize1
);
2011 /*****************************************************************************/
2014 * Try to find an ECH board and initialize it. This code is capable of
2015 * dealing with all types of ECH board.
2018 static int __devinit
stl_initech(struct stlbrd
*brdp
)
2020 struct stlpanel
*panelp
;
2021 unsigned int status
, nxtid
, ioaddr
, conflict
, panelnr
, banknr
, i
;
2025 pr_debug("stl_initech(brdp=%p)\n", brdp
);
2031 * Set up the initial board register contents for boards. This varies a
2032 * bit between the different board types. So we need to handle each
2033 * separately. Also do a check that the supplied IRQ is good.
2035 switch (brdp
->brdtype
) {
2038 brdp
->isr
= stl_echatintr
;
2039 brdp
->ioctrl
= brdp
->ioaddr1
+ 1;
2040 brdp
->iostatus
= brdp
->ioaddr1
+ 1;
2041 status
= inb(brdp
->iostatus
);
2042 if ((status
& ECH_IDBITMASK
) != ECH_ID
) {
2046 if ((brdp
->irq
< 0) || (brdp
->irq
> 15) ||
2047 (stl_vecmap
[brdp
->irq
] == (unsigned char) 0xff)) {
2048 printk("STALLION: invalid irq=%d for brd=%d\n",
2049 brdp
->irq
, brdp
->brdnr
);
2053 status
= ((brdp
->ioaddr2
& ECH_ADDR2MASK
) >> 1);
2054 status
|= (stl_vecmap
[brdp
->irq
] << 1);
2055 outb((status
| ECH_BRDRESET
), brdp
->ioaddr1
);
2056 brdp
->ioctrlval
= ECH_INTENABLE
|
2057 ((brdp
->irqtype
) ? ECH_INTLEVEL
: ECH_INTEDGE
);
2058 for (i
= 0; i
< 10; i
++)
2059 outb((brdp
->ioctrlval
| ECH_BRDENABLE
), brdp
->ioctrl
);
2062 name
= "serial(EC8/32)";
2063 outb(status
, brdp
->ioaddr1
);
2067 brdp
->isr
= stl_echmcaintr
;
2068 brdp
->ioctrl
= brdp
->ioaddr1
+ 0x20;
2069 brdp
->iostatus
= brdp
->ioctrl
;
2070 status
= inb(brdp
->iostatus
);
2071 if ((status
& ECH_IDBITMASK
) != ECH_ID
) {
2075 if ((brdp
->irq
< 0) || (brdp
->irq
> 15) ||
2076 (stl_vecmap
[brdp
->irq
] == (unsigned char) 0xff)) {
2077 printk("STALLION: invalid irq=%d for brd=%d\n",
2078 brdp
->irq
, brdp
->brdnr
);
2082 outb(ECHMC_BRDRESET
, brdp
->ioctrl
);
2083 outb(ECHMC_INTENABLE
, brdp
->ioctrl
);
2085 name
= "serial(EC8/32-MC)";
2089 brdp
->isr
= stl_echpciintr
;
2090 brdp
->ioctrl
= brdp
->ioaddr1
+ 2;
2093 name
= "serial(EC8/32-PCI)";
2097 brdp
->isr
= stl_echpci64intr
;
2098 brdp
->ioctrl
= brdp
->ioaddr2
+ 0x40;
2099 outb(0x43, (brdp
->ioaddr1
+ 0x4c));
2100 brdp
->iosize1
= 0x80;
2101 brdp
->iosize2
= 0x80;
2102 name
= "serial(EC8/64-PCI)";
2106 printk("STALLION: unknown board type=%d\n", brdp
->brdtype
);
2112 * Check boards for possible IO address conflicts and return fail status
2113 * if an IO conflict found.
2116 if (!request_region(brdp
->ioaddr1
, brdp
->iosize1
, name
)) {
2117 printk(KERN_WARNING
"STALLION: Warning, board %d I/O address "
2118 "%x conflicts with another device\n", brdp
->brdnr
,
2123 if (brdp
->iosize2
> 0)
2124 if (!request_region(brdp
->ioaddr2
, brdp
->iosize2
, name
)) {
2125 printk(KERN_WARNING
"STALLION: Warning, board %d I/O "
2126 "address %x conflicts with another device\n",
2127 brdp
->brdnr
, brdp
->ioaddr2
);
2128 printk(KERN_WARNING
"STALLION: Warning, also "
2129 "releasing board %d I/O address %x \n",
2130 brdp
->brdnr
, brdp
->ioaddr1
);
2135 * Scan through the secondary io address space looking for panels.
2136 * As we find'em allocate and initialize panel structures for each.
2138 brdp
->clk
= CD1400_CLK
;
2139 brdp
->hwid
= status
;
2141 ioaddr
= brdp
->ioaddr2
;
2146 for (i
= 0; i
< STL_MAXPANELS
; i
++) {
2147 if (brdp
->brdtype
== BRD_ECHPCI
) {
2148 outb(nxtid
, brdp
->ioctrl
);
2149 ioaddr
= brdp
->ioaddr2
;
2151 status
= inb(ioaddr
+ ECH_PNLSTATUS
);
2152 if ((status
& ECH_PNLIDMASK
) != nxtid
)
2154 panelp
= kzalloc(sizeof(struct stlpanel
), GFP_KERNEL
);
2156 printk("STALLION: failed to allocate memory "
2157 "(size=%Zd)\n", sizeof(struct stlpanel
));
2161 panelp
->magic
= STL_PANELMAGIC
;
2162 panelp
->brdnr
= brdp
->brdnr
;
2163 panelp
->panelnr
= panelnr
;
2164 panelp
->iobase
= ioaddr
;
2165 panelp
->pagenr
= nxtid
;
2166 panelp
->hwid
= status
;
2167 brdp
->bnk2panel
[banknr
] = panelp
;
2168 brdp
->bnkpageaddr
[banknr
] = nxtid
;
2169 brdp
->bnkstataddr
[banknr
++] = ioaddr
+ ECH_PNLSTATUS
;
2171 if (status
& ECH_PNLXPID
) {
2172 panelp
->uartp
= &stl_sc26198uart
;
2173 panelp
->isr
= stl_sc26198intr
;
2174 if (status
& ECH_PNL16PORT
) {
2175 panelp
->nrports
= 16;
2176 brdp
->bnk2panel
[banknr
] = panelp
;
2177 brdp
->bnkpageaddr
[banknr
] = nxtid
;
2178 brdp
->bnkstataddr
[banknr
++] = ioaddr
+ 4 +
2181 panelp
->nrports
= 8;
2183 panelp
->uartp
= &stl_cd1400uart
;
2184 panelp
->isr
= stl_cd1400echintr
;
2185 if (status
& ECH_PNL16PORT
) {
2186 panelp
->nrports
= 16;
2187 panelp
->ackmask
= 0x80;
2188 if (brdp
->brdtype
!= BRD_ECHPCI
)
2189 ioaddr
+= EREG_BANKSIZE
;
2190 brdp
->bnk2panel
[banknr
] = panelp
;
2191 brdp
->bnkpageaddr
[banknr
] = ++nxtid
;
2192 brdp
->bnkstataddr
[banknr
++] = ioaddr
+
2195 panelp
->nrports
= 8;
2196 panelp
->ackmask
= 0xc0;
2201 ioaddr
+= EREG_BANKSIZE
;
2202 brdp
->nrports
+= panelp
->nrports
;
2203 brdp
->panels
[panelnr
++] = panelp
;
2204 if ((brdp
->brdtype
!= BRD_ECHPCI
) &&
2205 (ioaddr
>= (brdp
->ioaddr2
+ brdp
->iosize2
))) {
2211 brdp
->nrpanels
= panelnr
;
2212 brdp
->nrbnks
= banknr
;
2213 if (brdp
->brdtype
== BRD_ECH
)
2214 outb((brdp
->ioctrlval
| ECH_BRDDISABLE
), brdp
->ioctrl
);
2216 brdp
->state
|= BRD_FOUND
;
2217 if (request_irq(brdp
->irq
, stl_intr
, IRQF_SHARED
, name
, brdp
) != 0) {
2218 printk("STALLION: failed to register interrupt "
2219 "routine for %s irq=%d\n", name
, brdp
->irq
);
2226 stl_cleanup_panels(brdp
);
2227 if (brdp
->iosize2
> 0)
2228 release_region(brdp
->ioaddr2
, brdp
->iosize2
);
2230 release_region(brdp
->ioaddr1
, brdp
->iosize1
);
2235 /*****************************************************************************/
2238 * Initialize and configure the specified board.
2239 * Scan through all the boards in the configuration and see what we
2240 * can find. Handle EIO and the ECH boards a little differently here
2241 * since the initial search and setup is very different.
2244 static int __devinit
stl_brdinit(struct stlbrd
*brdp
)
2248 pr_debug("stl_brdinit(brdp=%p)\n", brdp
);
2250 switch (brdp
->brdtype
) {
2253 retval
= stl_initeio(brdp
);
2261 retval
= stl_initech(brdp
);
2266 printk("STALLION: board=%d is unknown board type=%d\n",
2267 brdp
->brdnr
, brdp
->brdtype
);
2272 if ((brdp
->state
& BRD_FOUND
) == 0) {
2273 printk("STALLION: %s board not found, board=%d io=%x irq=%d\n",
2274 stl_brdnames
[brdp
->brdtype
], brdp
->brdnr
,
2275 brdp
->ioaddr1
, brdp
->irq
);
2279 for (i
= 0; i
< STL_MAXPANELS
; i
++)
2280 if (brdp
->panels
[i
] != NULL
)
2281 stl_initports(brdp
, brdp
->panels
[i
]);
2283 printk("STALLION: %s found, board=%d io=%x irq=%d "
2284 "nrpanels=%d nrports=%d\n", stl_brdnames
[brdp
->brdtype
],
2285 brdp
->brdnr
, brdp
->ioaddr1
, brdp
->irq
, brdp
->nrpanels
,
2290 free_irq(brdp
->irq
, brdp
);
2292 stl_cleanup_panels(brdp
);
2294 release_region(brdp
->ioaddr1
, brdp
->iosize1
);
2295 if (brdp
->iosize2
> 0)
2296 release_region(brdp
->ioaddr2
, brdp
->iosize2
);
2301 /*****************************************************************************/
2304 * Find the next available board number that is free.
2307 static int __devinit
stl_getbrdnr(void)
2311 for (i
= 0; i
< STL_MAXBRDS
; i
++)
2312 if (stl_brds
[i
] == NULL
) {
2313 if (i
>= stl_nrbrds
)
2321 /*****************************************************************************/
2323 * We have a Stallion board. Allocate a board structure and
2324 * initialize it. Read its IO and IRQ resources from PCI
2325 * configuration space.
2328 static int __devinit
stl_pciprobe(struct pci_dev
*pdev
,
2329 const struct pci_device_id
*ent
)
2331 struct stlbrd
*brdp
;
2332 unsigned int i
, brdtype
= ent
->driver_data
;
2333 int brdnr
, retval
= -ENODEV
;
2335 if ((pdev
->class >> 8) == PCI_CLASS_STORAGE_IDE
)
2338 retval
= pci_enable_device(pdev
);
2341 brdp
= stl_allocbrd();
2346 mutex_lock(&stl_brdslock
);
2347 brdnr
= stl_getbrdnr();
2349 dev_err(&pdev
->dev
, "too many boards found, "
2350 "maximum supported %d\n", STL_MAXBRDS
);
2351 mutex_unlock(&stl_brdslock
);
2355 brdp
->brdnr
= (unsigned int)brdnr
;
2356 stl_brds
[brdp
->brdnr
] = brdp
;
2357 mutex_unlock(&stl_brdslock
);
2359 brdp
->brdtype
= brdtype
;
2360 brdp
->state
|= STL_PROBED
;
2363 * We have all resources from the board, so let's setup the actual
2364 * board structure now.
2368 brdp
->ioaddr2
= pci_resource_start(pdev
, 0);
2369 brdp
->ioaddr1
= pci_resource_start(pdev
, 1);
2372 brdp
->ioaddr2
= pci_resource_start(pdev
, 2);
2373 brdp
->ioaddr1
= pci_resource_start(pdev
, 1);
2376 brdp
->ioaddr1
= pci_resource_start(pdev
, 2);
2377 brdp
->ioaddr2
= pci_resource_start(pdev
, 1);
2380 dev_err(&pdev
->dev
, "unknown PCI board type=%u\n", brdtype
);
2384 brdp
->irq
= pdev
->irq
;
2385 retval
= stl_brdinit(brdp
);
2389 pci_set_drvdata(pdev
, brdp
);
2391 for (i
= 0; i
< brdp
->nrports
; i
++)
2392 tty_register_device(stl_serial
,
2393 brdp
->brdnr
* STL_MAXPORTS
+ i
, &pdev
->dev
);
2397 stl_brds
[brdp
->brdnr
] = NULL
;
2404 static void __devexit
stl_pciremove(struct pci_dev
*pdev
)
2406 struct stlbrd
*brdp
= pci_get_drvdata(pdev
);
2409 free_irq(brdp
->irq
, brdp
);
2411 stl_cleanup_panels(brdp
);
2413 release_region(brdp
->ioaddr1
, brdp
->iosize1
);
2414 if (brdp
->iosize2
> 0)
2415 release_region(brdp
->ioaddr2
, brdp
->iosize2
);
2417 for (i
= 0; i
< brdp
->nrports
; i
++)
2418 tty_unregister_device(stl_serial
,
2419 brdp
->brdnr
* STL_MAXPORTS
+ i
);
2421 stl_brds
[brdp
->brdnr
] = NULL
;
2425 static struct pci_driver stl_pcidriver
= {
2427 .id_table
= stl_pcibrds
,
2428 .probe
= stl_pciprobe
,
2429 .remove
= __devexit_p(stl_pciremove
)
2432 /*****************************************************************************/
2435 * Return the board stats structure to user app.
2438 static int stl_getbrdstats(combrd_t __user
*bp
)
2440 combrd_t stl_brdstats
;
2441 struct stlbrd
*brdp
;
2442 struct stlpanel
*panelp
;
2445 if (copy_from_user(&stl_brdstats
, bp
, sizeof(combrd_t
)))
2447 if (stl_brdstats
.brd
>= STL_MAXBRDS
)
2449 brdp
= stl_brds
[stl_brdstats
.brd
];
2453 memset(&stl_brdstats
, 0, sizeof(combrd_t
));
2454 stl_brdstats
.brd
= brdp
->brdnr
;
2455 stl_brdstats
.type
= brdp
->brdtype
;
2456 stl_brdstats
.hwid
= brdp
->hwid
;
2457 stl_brdstats
.state
= brdp
->state
;
2458 stl_brdstats
.ioaddr
= brdp
->ioaddr1
;
2459 stl_brdstats
.ioaddr2
= brdp
->ioaddr2
;
2460 stl_brdstats
.irq
= brdp
->irq
;
2461 stl_brdstats
.nrpanels
= brdp
->nrpanels
;
2462 stl_brdstats
.nrports
= brdp
->nrports
;
2463 for (i
= 0; i
< brdp
->nrpanels
; i
++) {
2464 panelp
= brdp
->panels
[i
];
2465 stl_brdstats
.panels
[i
].panel
= i
;
2466 stl_brdstats
.panels
[i
].hwid
= panelp
->hwid
;
2467 stl_brdstats
.panels
[i
].nrports
= panelp
->nrports
;
2470 return copy_to_user(bp
, &stl_brdstats
, sizeof(combrd_t
)) ? -EFAULT
: 0;
2473 /*****************************************************************************/
2476 * Resolve the referenced port number into a port struct pointer.
2479 static struct stlport
*stl_getport(int brdnr
, int panelnr
, int portnr
)
2481 struct stlbrd
*brdp
;
2482 struct stlpanel
*panelp
;
2484 if (brdnr
< 0 || brdnr
>= STL_MAXBRDS
)
2486 brdp
= stl_brds
[brdnr
];
2489 if (panelnr
< 0 || (unsigned int)panelnr
>= brdp
->nrpanels
)
2491 panelp
= brdp
->panels
[panelnr
];
2494 if (portnr
< 0 || (unsigned int)portnr
>= panelp
->nrports
)
2496 return panelp
->ports
[portnr
];
2499 /*****************************************************************************/
2502 * Return the port stats structure to user app. A NULL port struct
2503 * pointer passed in means that we need to find out from the app
2504 * what port to get stats for (used through board control device).
2507 static int stl_getportstats(struct stlport
*portp
, comstats_t __user
*cp
)
2509 comstats_t stl_comstats
;
2510 unsigned char *head
, *tail
;
2511 unsigned long flags
;
2514 if (copy_from_user(&stl_comstats
, cp
, sizeof(comstats_t
)))
2516 portp
= stl_getport(stl_comstats
.brd
, stl_comstats
.panel
,
2522 portp
->stats
.state
= portp
->istate
;
2523 portp
->stats
.flags
= portp
->flags
;
2524 portp
->stats
.hwid
= portp
->hwid
;
2526 portp
->stats
.ttystate
= 0;
2527 portp
->stats
.cflags
= 0;
2528 portp
->stats
.iflags
= 0;
2529 portp
->stats
.oflags
= 0;
2530 portp
->stats
.lflags
= 0;
2531 portp
->stats
.rxbuffered
= 0;
2533 spin_lock_irqsave(&stallion_lock
, flags
);
2534 if (portp
->tty
!= NULL
)
2535 if (portp
->tty
->driver_data
== portp
) {
2536 portp
->stats
.ttystate
= portp
->tty
->flags
;
2537 /* No longer available as a statistic */
2538 portp
->stats
.rxbuffered
= 1; /*portp->tty->flip.count; */
2539 if (portp
->tty
->termios
!= NULL
) {
2540 portp
->stats
.cflags
= portp
->tty
->termios
->c_cflag
;
2541 portp
->stats
.iflags
= portp
->tty
->termios
->c_iflag
;
2542 portp
->stats
.oflags
= portp
->tty
->termios
->c_oflag
;
2543 portp
->stats
.lflags
= portp
->tty
->termios
->c_lflag
;
2546 spin_unlock_irqrestore(&stallion_lock
, flags
);
2548 head
= portp
->tx
.head
;
2549 tail
= portp
->tx
.tail
;
2550 portp
->stats
.txbuffered
= (head
>= tail
) ? (head
- tail
) :
2551 (STL_TXBUFSIZE
- (tail
- head
));
2553 portp
->stats
.signals
= (unsigned long) stl_getsignals(portp
);
2555 return copy_to_user(cp
, &portp
->stats
,
2556 sizeof(comstats_t
)) ? -EFAULT
: 0;
2559 /*****************************************************************************/
2562 * Clear the port stats structure. We also return it zeroed out...
2565 static int stl_clrportstats(struct stlport
*portp
, comstats_t __user
*cp
)
2567 comstats_t stl_comstats
;
2570 if (copy_from_user(&stl_comstats
, cp
, sizeof(comstats_t
)))
2572 portp
= stl_getport(stl_comstats
.brd
, stl_comstats
.panel
,
2578 memset(&portp
->stats
, 0, sizeof(comstats_t
));
2579 portp
->stats
.brd
= portp
->brdnr
;
2580 portp
->stats
.panel
= portp
->panelnr
;
2581 portp
->stats
.port
= portp
->portnr
;
2582 return copy_to_user(cp
, &portp
->stats
,
2583 sizeof(comstats_t
)) ? -EFAULT
: 0;
2586 /*****************************************************************************/
2589 * Return the entire driver ports structure to a user app.
2592 static int stl_getportstruct(struct stlport __user
*arg
)
2594 struct stlport stl_dummyport
;
2595 struct stlport
*portp
;
2597 if (copy_from_user(&stl_dummyport
, arg
, sizeof(struct stlport
)))
2599 portp
= stl_getport(stl_dummyport
.brdnr
, stl_dummyport
.panelnr
,
2600 stl_dummyport
.portnr
);
2603 return copy_to_user(arg
, portp
, sizeof(struct stlport
)) ? -EFAULT
: 0;
2606 /*****************************************************************************/
2609 * Return the entire driver board structure to a user app.
2612 static int stl_getbrdstruct(struct stlbrd __user
*arg
)
2614 struct stlbrd stl_dummybrd
;
2615 struct stlbrd
*brdp
;
2617 if (copy_from_user(&stl_dummybrd
, arg
, sizeof(struct stlbrd
)))
2619 if (stl_dummybrd
.brdnr
>= STL_MAXBRDS
)
2621 brdp
= stl_brds
[stl_dummybrd
.brdnr
];
2624 return copy_to_user(arg
, brdp
, sizeof(struct stlbrd
)) ? -EFAULT
: 0;
2627 /*****************************************************************************/
2630 * The "staliomem" device is also required to do some special operations
2631 * on the board and/or ports. In this driver it is mostly used for stats
2635 static int stl_memioctl(struct inode
*ip
, struct file
*fp
, unsigned int cmd
, unsigned long arg
)
2638 void __user
*argp
= (void __user
*)arg
;
2640 pr_debug("stl_memioctl(ip=%p,fp=%p,cmd=%x,arg=%lx)\n", ip
, fp
, cmd
,arg
);
2643 if (brdnr
>= STL_MAXBRDS
)
2648 case COM_GETPORTSTATS
:
2649 rc
= stl_getportstats(NULL
, argp
);
2651 case COM_CLRPORTSTATS
:
2652 rc
= stl_clrportstats(NULL
, argp
);
2654 case COM_GETBRDSTATS
:
2655 rc
= stl_getbrdstats(argp
);
2658 rc
= stl_getportstruct(argp
);
2661 rc
= stl_getbrdstruct(argp
);
2671 static const struct tty_operations stl_ops
= {
2675 .put_char
= stl_putchar
,
2676 .flush_chars
= stl_flushchars
,
2677 .write_room
= stl_writeroom
,
2678 .chars_in_buffer
= stl_charsinbuffer
,
2680 .set_termios
= stl_settermios
,
2681 .throttle
= stl_throttle
,
2682 .unthrottle
= stl_unthrottle
,
2685 .hangup
= stl_hangup
,
2686 .flush_buffer
= stl_flushbuffer
,
2687 .break_ctl
= stl_breakctl
,
2688 .wait_until_sent
= stl_waituntilsent
,
2689 .send_xchar
= stl_sendxchar
,
2690 .read_proc
= stl_readproc
,
2691 .tiocmget
= stl_tiocmget
,
2692 .tiocmset
= stl_tiocmset
,
2695 /*****************************************************************************/
2696 /* CD1400 HARDWARE FUNCTIONS */
2697 /*****************************************************************************/
2700 * These functions get/set/update the registers of the cd1400 UARTs.
2701 * Access to the cd1400 registers is via an address/data io port pair.
2702 * (Maybe should make this inline...)
2705 static int stl_cd1400getreg(struct stlport
*portp
, int regnr
)
2707 outb((regnr
+ portp
->uartaddr
), portp
->ioaddr
);
2708 return inb(portp
->ioaddr
+ EREG_DATA
);
2711 static void stl_cd1400setreg(struct stlport
*portp
, int regnr
, int value
)
2713 outb(regnr
+ portp
->uartaddr
, portp
->ioaddr
);
2714 outb(value
, portp
->ioaddr
+ EREG_DATA
);
2717 static int stl_cd1400updatereg(struct stlport
*portp
, int regnr
, int value
)
2719 outb(regnr
+ portp
->uartaddr
, portp
->ioaddr
);
2720 if (inb(portp
->ioaddr
+ EREG_DATA
) != value
) {
2721 outb(value
, portp
->ioaddr
+ EREG_DATA
);
2727 /*****************************************************************************/
2730 * Inbitialize the UARTs in a panel. We don't care what sort of board
2731 * these ports are on - since the port io registers are almost
2732 * identical when dealing with ports.
2735 static int stl_cd1400panelinit(struct stlbrd
*brdp
, struct stlpanel
*panelp
)
2739 int nrchips
, uartaddr
, ioaddr
;
2740 unsigned long flags
;
2742 pr_debug("stl_panelinit(brdp=%p,panelp=%p)\n", brdp
, panelp
);
2744 spin_lock_irqsave(&brd_lock
, flags
);
2745 BRDENABLE(panelp
->brdnr
, panelp
->pagenr
);
2748 * Check that each chip is present and started up OK.
2751 nrchips
= panelp
->nrports
/ CD1400_PORTS
;
2752 for (i
= 0; i
< nrchips
; i
++) {
2753 if (brdp
->brdtype
== BRD_ECHPCI
) {
2754 outb((panelp
->pagenr
+ (i
>> 1)), brdp
->ioctrl
);
2755 ioaddr
= panelp
->iobase
;
2757 ioaddr
= panelp
->iobase
+ (EREG_BANKSIZE
* (i
>> 1));
2758 uartaddr
= (i
& 0x01) ? 0x080 : 0;
2759 outb((GFRCR
+ uartaddr
), ioaddr
);
2760 outb(0, (ioaddr
+ EREG_DATA
));
2761 outb((CCR
+ uartaddr
), ioaddr
);
2762 outb(CCR_RESETFULL
, (ioaddr
+ EREG_DATA
));
2763 outb(CCR_RESETFULL
, (ioaddr
+ EREG_DATA
));
2764 outb((GFRCR
+ uartaddr
), ioaddr
);
2765 for (j
= 0; j
< CCR_MAXWAIT
; j
++)
2766 if ((gfrcr
= inb(ioaddr
+ EREG_DATA
)) != 0)
2769 if ((j
>= CCR_MAXWAIT
) || (gfrcr
< 0x40) || (gfrcr
> 0x60)) {
2770 printk("STALLION: cd1400 not responding, "
2771 "brd=%d panel=%d chip=%d\n",
2772 panelp
->brdnr
, panelp
->panelnr
, i
);
2775 chipmask
|= (0x1 << i
);
2776 outb((PPR
+ uartaddr
), ioaddr
);
2777 outb(PPR_SCALAR
, (ioaddr
+ EREG_DATA
));
2780 BRDDISABLE(panelp
->brdnr
);
2781 spin_unlock_irqrestore(&brd_lock
, flags
);
2785 /*****************************************************************************/
2788 * Initialize hardware specific port registers.
2791 static void stl_cd1400portinit(struct stlbrd
*brdp
, struct stlpanel
*panelp
, struct stlport
*portp
)
2793 unsigned long flags
;
2794 pr_debug("stl_cd1400portinit(brdp=%p,panelp=%p,portp=%p)\n", brdp
,
2797 if ((brdp
== NULL
) || (panelp
== NULL
) ||
2801 spin_lock_irqsave(&brd_lock
, flags
);
2802 portp
->ioaddr
= panelp
->iobase
+ (((brdp
->brdtype
== BRD_ECHPCI
) ||
2803 (portp
->portnr
< 8)) ? 0 : EREG_BANKSIZE
);
2804 portp
->uartaddr
= (portp
->portnr
& 0x04) << 5;
2805 portp
->pagenr
= panelp
->pagenr
+ (portp
->portnr
>> 3);
2807 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
2808 stl_cd1400setreg(portp
, CAR
, (portp
->portnr
& 0x03));
2809 stl_cd1400setreg(portp
, LIVR
, (portp
->portnr
<< 3));
2810 portp
->hwid
= stl_cd1400getreg(portp
, GFRCR
);
2811 BRDDISABLE(portp
->brdnr
);
2812 spin_unlock_irqrestore(&brd_lock
, flags
);
2815 /*****************************************************************************/
2818 * Wait for the command register to be ready. We will poll this,
2819 * since it won't usually take too long to be ready.
2822 static void stl_cd1400ccrwait(struct stlport
*portp
)
2826 for (i
= 0; i
< CCR_MAXWAIT
; i
++)
2827 if (stl_cd1400getreg(portp
, CCR
) == 0)
2830 printk("STALLION: cd1400 not responding, port=%d panel=%d brd=%d\n",
2831 portp
->portnr
, portp
->panelnr
, portp
->brdnr
);
2834 /*****************************************************************************/
2837 * Set up the cd1400 registers for a port based on the termios port
2841 static void stl_cd1400setport(struct stlport
*portp
, struct ktermios
*tiosp
)
2843 struct stlbrd
*brdp
;
2844 unsigned long flags
;
2845 unsigned int clkdiv
, baudrate
;
2846 unsigned char cor1
, cor2
, cor3
;
2847 unsigned char cor4
, cor5
, ccr
;
2848 unsigned char srer
, sreron
, sreroff
;
2849 unsigned char mcor1
, mcor2
, rtpr
;
2850 unsigned char clk
, div
;
2866 brdp
= stl_brds
[portp
->brdnr
];
2871 * Set up the RX char ignore mask with those RX error types we
2872 * can ignore. We can get the cd1400 to help us out a little here,
2873 * it will ignore parity errors and breaks for us.
2875 portp
->rxignoremsk
= 0;
2876 if (tiosp
->c_iflag
& IGNPAR
) {
2877 portp
->rxignoremsk
|= (ST_PARITY
| ST_FRAMING
| ST_OVERRUN
);
2878 cor1
|= COR1_PARIGNORE
;
2880 if (tiosp
->c_iflag
& IGNBRK
) {
2881 portp
->rxignoremsk
|= ST_BREAK
;
2882 cor4
|= COR4_IGNBRK
;
2885 portp
->rxmarkmsk
= ST_OVERRUN
;
2886 if (tiosp
->c_iflag
& (INPCK
| PARMRK
))
2887 portp
->rxmarkmsk
|= (ST_PARITY
| ST_FRAMING
);
2888 if (tiosp
->c_iflag
& BRKINT
)
2889 portp
->rxmarkmsk
|= ST_BREAK
;
2892 * Go through the char size, parity and stop bits and set all the
2893 * option register appropriately.
2895 switch (tiosp
->c_cflag
& CSIZE
) {
2910 if (tiosp
->c_cflag
& CSTOPB
)
2915 if (tiosp
->c_cflag
& PARENB
) {
2916 if (tiosp
->c_cflag
& PARODD
)
2917 cor1
|= (COR1_PARENB
| COR1_PARODD
);
2919 cor1
|= (COR1_PARENB
| COR1_PAREVEN
);
2921 cor1
|= COR1_PARNONE
;
2925 * Set the RX FIFO threshold at 6 chars. This gives a bit of breathing
2926 * space for hardware flow control and the like. This should be set to
2927 * VMIN. Also here we will set the RX data timeout to 10ms - this should
2928 * really be based on VTIME.
2930 cor3
|= FIFO_RXTHRESHOLD
;
2934 * Calculate the baud rate timers. For now we will just assume that
2935 * the input and output baud are the same. Could have used a baud
2936 * table here, but this way we can generate virtually any baud rate
2939 baudrate
= tiosp
->c_cflag
& CBAUD
;
2940 if (baudrate
& CBAUDEX
) {
2941 baudrate
&= ~CBAUDEX
;
2942 if ((baudrate
< 1) || (baudrate
> 4))
2943 tiosp
->c_cflag
&= ~CBAUDEX
;
2947 baudrate
= stl_baudrates
[baudrate
];
2948 if ((tiosp
->c_cflag
& CBAUD
) == B38400
) {
2949 if ((portp
->flags
& ASYNC_SPD_MASK
) == ASYNC_SPD_HI
)
2951 else if ((portp
->flags
& ASYNC_SPD_MASK
) == ASYNC_SPD_VHI
)
2953 else if ((portp
->flags
& ASYNC_SPD_MASK
) == ASYNC_SPD_SHI
)
2955 else if ((portp
->flags
& ASYNC_SPD_MASK
) == ASYNC_SPD_WARP
)
2957 else if ((portp
->flags
& ASYNC_SPD_MASK
) == ASYNC_SPD_CUST
)
2958 baudrate
= (portp
->baud_base
/ portp
->custom_divisor
);
2960 if (baudrate
> STL_CD1400MAXBAUD
)
2961 baudrate
= STL_CD1400MAXBAUD
;
2964 for (clk
= 0; clk
< CD1400_NUMCLKS
; clk
++) {
2965 clkdiv
= (portp
->clk
/ stl_cd1400clkdivs
[clk
]) / baudrate
;
2969 div
= (unsigned char) clkdiv
;
2973 * Check what form of modem signaling is required and set it up.
2975 if ((tiosp
->c_cflag
& CLOCAL
) == 0) {
2978 sreron
|= SRER_MODEM
;
2979 portp
->flags
|= ASYNC_CHECK_CD
;
2981 portp
->flags
&= ~ASYNC_CHECK_CD
;
2984 * Setup cd1400 enhanced modes if we can. In particular we want to
2985 * handle as much of the flow control as possible automatically. As
2986 * well as saving a few CPU cycles it will also greatly improve flow
2987 * control reliability.
2989 if (tiosp
->c_iflag
& IXON
) {
2992 if (tiosp
->c_iflag
& IXANY
)
2996 if (tiosp
->c_cflag
& CRTSCTS
) {
2998 mcor1
|= FIFO_RTSTHRESHOLD
;
3002 * All cd1400 register values calculated so go through and set
3006 pr_debug("SETPORT: portnr=%d panelnr=%d brdnr=%d\n",
3007 portp
->portnr
, portp
->panelnr
, portp
->brdnr
);
3008 pr_debug(" cor1=%x cor2=%x cor3=%x cor4=%x cor5=%x\n",
3009 cor1
, cor2
, cor3
, cor4
, cor5
);
3010 pr_debug(" mcor1=%x mcor2=%x rtpr=%x sreron=%x sreroff=%x\n",
3011 mcor1
, mcor2
, rtpr
, sreron
, sreroff
);
3012 pr_debug(" tcor=%x tbpr=%x rcor=%x rbpr=%x\n", clk
, div
, clk
, div
);
3013 pr_debug(" schr1=%x schr2=%x schr3=%x schr4=%x\n",
3014 tiosp
->c_cc
[VSTART
], tiosp
->c_cc
[VSTOP
],
3015 tiosp
->c_cc
[VSTART
], tiosp
->c_cc
[VSTOP
]);
3017 spin_lock_irqsave(&brd_lock
, flags
);
3018 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
3019 stl_cd1400setreg(portp
, CAR
, (portp
->portnr
& 0x3));
3020 srer
= stl_cd1400getreg(portp
, SRER
);
3021 stl_cd1400setreg(portp
, SRER
, 0);
3022 if (stl_cd1400updatereg(portp
, COR1
, cor1
))
3024 if (stl_cd1400updatereg(portp
, COR2
, cor2
))
3026 if (stl_cd1400updatereg(portp
, COR3
, cor3
))
3029 stl_cd1400ccrwait(portp
);
3030 stl_cd1400setreg(portp
, CCR
, CCR_CORCHANGE
);
3032 stl_cd1400setreg(portp
, COR4
, cor4
);
3033 stl_cd1400setreg(portp
, COR5
, cor5
);
3034 stl_cd1400setreg(portp
, MCOR1
, mcor1
);
3035 stl_cd1400setreg(portp
, MCOR2
, mcor2
);
3037 stl_cd1400setreg(portp
, TCOR
, clk
);
3038 stl_cd1400setreg(portp
, TBPR
, div
);
3039 stl_cd1400setreg(portp
, RCOR
, clk
);
3040 stl_cd1400setreg(portp
, RBPR
, div
);
3042 stl_cd1400setreg(portp
, SCHR1
, tiosp
->c_cc
[VSTART
]);
3043 stl_cd1400setreg(portp
, SCHR2
, tiosp
->c_cc
[VSTOP
]);
3044 stl_cd1400setreg(portp
, SCHR3
, tiosp
->c_cc
[VSTART
]);
3045 stl_cd1400setreg(portp
, SCHR4
, tiosp
->c_cc
[VSTOP
]);
3046 stl_cd1400setreg(portp
, RTPR
, rtpr
);
3047 mcor1
= stl_cd1400getreg(portp
, MSVR1
);
3048 if (mcor1
& MSVR1_DCD
)
3049 portp
->sigs
|= TIOCM_CD
;
3051 portp
->sigs
&= ~TIOCM_CD
;
3052 stl_cd1400setreg(portp
, SRER
, ((srer
& ~sreroff
) | sreron
));
3053 BRDDISABLE(portp
->brdnr
);
3054 spin_unlock_irqrestore(&brd_lock
, flags
);
3057 /*****************************************************************************/
3060 * Set the state of the DTR and RTS signals.
3063 static void stl_cd1400setsignals(struct stlport
*portp
, int dtr
, int rts
)
3065 unsigned char msvr1
, msvr2
;
3066 unsigned long flags
;
3068 pr_debug("stl_cd1400setsignals(portp=%p,dtr=%d,rts=%d)\n",
3078 spin_lock_irqsave(&brd_lock
, flags
);
3079 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
3080 stl_cd1400setreg(portp
, CAR
, (portp
->portnr
& 0x03));
3082 stl_cd1400setreg(portp
, MSVR2
, msvr2
);
3084 stl_cd1400setreg(portp
, MSVR1
, msvr1
);
3085 BRDDISABLE(portp
->brdnr
);
3086 spin_unlock_irqrestore(&brd_lock
, flags
);
3089 /*****************************************************************************/
3092 * Return the state of the signals.
3095 static int stl_cd1400getsignals(struct stlport
*portp
)
3097 unsigned char msvr1
, msvr2
;
3098 unsigned long flags
;
3101 pr_debug("stl_cd1400getsignals(portp=%p)\n", portp
);
3103 spin_lock_irqsave(&brd_lock
, flags
);
3104 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
3105 stl_cd1400setreg(portp
, CAR
, (portp
->portnr
& 0x03));
3106 msvr1
= stl_cd1400getreg(portp
, MSVR1
);
3107 msvr2
= stl_cd1400getreg(portp
, MSVR2
);
3108 BRDDISABLE(portp
->brdnr
);
3109 spin_unlock_irqrestore(&brd_lock
, flags
);
3112 sigs
|= (msvr1
& MSVR1_DCD
) ? TIOCM_CD
: 0;
3113 sigs
|= (msvr1
& MSVR1_CTS
) ? TIOCM_CTS
: 0;
3114 sigs
|= (msvr1
& MSVR1_DTR
) ? TIOCM_DTR
: 0;
3115 sigs
|= (msvr2
& MSVR2_RTS
) ? TIOCM_RTS
: 0;
3117 sigs
|= (msvr1
& MSVR1_RI
) ? TIOCM_RI
: 0;
3118 sigs
|= (msvr1
& MSVR1_DSR
) ? TIOCM_DSR
: 0;
3125 /*****************************************************************************/
3128 * Enable/Disable the Transmitter and/or Receiver.
3131 static void stl_cd1400enablerxtx(struct stlport
*portp
, int rx
, int tx
)
3134 unsigned long flags
;
3136 pr_debug("stl_cd1400enablerxtx(portp=%p,rx=%d,tx=%d)\n", portp
, rx
, tx
);
3141 ccr
|= CCR_TXDISABLE
;
3143 ccr
|= CCR_TXENABLE
;
3145 ccr
|= CCR_RXDISABLE
;
3147 ccr
|= CCR_RXENABLE
;
3149 spin_lock_irqsave(&brd_lock
, flags
);
3150 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
3151 stl_cd1400setreg(portp
, CAR
, (portp
->portnr
& 0x03));
3152 stl_cd1400ccrwait(portp
);
3153 stl_cd1400setreg(portp
, CCR
, ccr
);
3154 stl_cd1400ccrwait(portp
);
3155 BRDDISABLE(portp
->brdnr
);
3156 spin_unlock_irqrestore(&brd_lock
, flags
);
3159 /*****************************************************************************/
3162 * Start/stop the Transmitter and/or Receiver.
3165 static void stl_cd1400startrxtx(struct stlport
*portp
, int rx
, int tx
)
3167 unsigned char sreron
, sreroff
;
3168 unsigned long flags
;
3170 pr_debug("stl_cd1400startrxtx(portp=%p,rx=%d,tx=%d)\n", portp
, rx
, tx
);
3175 sreroff
|= (SRER_TXDATA
| SRER_TXEMPTY
);
3177 sreron
|= SRER_TXDATA
;
3179 sreron
|= SRER_TXEMPTY
;
3181 sreroff
|= SRER_RXDATA
;
3183 sreron
|= SRER_RXDATA
;
3185 spin_lock_irqsave(&brd_lock
, flags
);
3186 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
3187 stl_cd1400setreg(portp
, CAR
, (portp
->portnr
& 0x03));
3188 stl_cd1400setreg(portp
, SRER
,
3189 ((stl_cd1400getreg(portp
, SRER
) & ~sreroff
) | sreron
));
3190 BRDDISABLE(portp
->brdnr
);
3192 set_bit(ASYI_TXBUSY
, &portp
->istate
);
3193 spin_unlock_irqrestore(&brd_lock
, flags
);
3196 /*****************************************************************************/
3199 * Disable all interrupts from this port.
3202 static void stl_cd1400disableintrs(struct stlport
*portp
)
3204 unsigned long flags
;
3206 pr_debug("stl_cd1400disableintrs(portp=%p)\n", portp
);
3208 spin_lock_irqsave(&brd_lock
, flags
);
3209 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
3210 stl_cd1400setreg(portp
, CAR
, (portp
->portnr
& 0x03));
3211 stl_cd1400setreg(portp
, SRER
, 0);
3212 BRDDISABLE(portp
->brdnr
);
3213 spin_unlock_irqrestore(&brd_lock
, flags
);
3216 /*****************************************************************************/
3218 static void stl_cd1400sendbreak(struct stlport
*portp
, int len
)
3220 unsigned long flags
;
3222 pr_debug("stl_cd1400sendbreak(portp=%p,len=%d)\n", portp
, len
);
3224 spin_lock_irqsave(&brd_lock
, flags
);
3225 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
3226 stl_cd1400setreg(portp
, CAR
, (portp
->portnr
& 0x03));
3227 stl_cd1400setreg(portp
, SRER
,
3228 ((stl_cd1400getreg(portp
, SRER
) & ~SRER_TXDATA
) |
3230 BRDDISABLE(portp
->brdnr
);
3231 portp
->brklen
= len
;
3233 portp
->stats
.txbreaks
++;
3234 spin_unlock_irqrestore(&brd_lock
, flags
);
3237 /*****************************************************************************/
3240 * Take flow control actions...
3243 static void stl_cd1400flowctrl(struct stlport
*portp
, int state
)
3245 struct tty_struct
*tty
;
3246 unsigned long flags
;
3248 pr_debug("stl_cd1400flowctrl(portp=%p,state=%x)\n", portp
, state
);
3256 spin_lock_irqsave(&brd_lock
, flags
);
3257 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
3258 stl_cd1400setreg(portp
, CAR
, (portp
->portnr
& 0x03));
3261 if (tty
->termios
->c_iflag
& IXOFF
) {
3262 stl_cd1400ccrwait(portp
);
3263 stl_cd1400setreg(portp
, CCR
, CCR_SENDSCHR1
);
3264 portp
->stats
.rxxon
++;
3265 stl_cd1400ccrwait(portp
);
3268 * Question: should we return RTS to what it was before? It may
3269 * have been set by an ioctl... Suppose not, since if you have
3270 * hardware flow control set then it is pretty silly to go and
3271 * set the RTS line by hand.
3273 if (tty
->termios
->c_cflag
& CRTSCTS
) {
3274 stl_cd1400setreg(portp
, MCOR1
,
3275 (stl_cd1400getreg(portp
, MCOR1
) |
3276 FIFO_RTSTHRESHOLD
));
3277 stl_cd1400setreg(portp
, MSVR2
, MSVR2_RTS
);
3278 portp
->stats
.rxrtson
++;
3281 if (tty
->termios
->c_iflag
& IXOFF
) {
3282 stl_cd1400ccrwait(portp
);
3283 stl_cd1400setreg(portp
, CCR
, CCR_SENDSCHR2
);
3284 portp
->stats
.rxxoff
++;
3285 stl_cd1400ccrwait(portp
);
3287 if (tty
->termios
->c_cflag
& CRTSCTS
) {
3288 stl_cd1400setreg(portp
, MCOR1
,
3289 (stl_cd1400getreg(portp
, MCOR1
) & 0xf0));
3290 stl_cd1400setreg(portp
, MSVR2
, 0);
3291 portp
->stats
.rxrtsoff
++;
3295 BRDDISABLE(portp
->brdnr
);
3296 spin_unlock_irqrestore(&brd_lock
, flags
);
3299 /*****************************************************************************/
3302 * Send a flow control character...
3305 static void stl_cd1400sendflow(struct stlport
*portp
, int state
)
3307 struct tty_struct
*tty
;
3308 unsigned long flags
;
3310 pr_debug("stl_cd1400sendflow(portp=%p,state=%x)\n", portp
, state
);
3318 spin_lock_irqsave(&brd_lock
, flags
);
3319 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
3320 stl_cd1400setreg(portp
, CAR
, (portp
->portnr
& 0x03));
3322 stl_cd1400ccrwait(portp
);
3323 stl_cd1400setreg(portp
, CCR
, CCR_SENDSCHR1
);
3324 portp
->stats
.rxxon
++;
3325 stl_cd1400ccrwait(portp
);
3327 stl_cd1400ccrwait(portp
);
3328 stl_cd1400setreg(portp
, CCR
, CCR_SENDSCHR2
);
3329 portp
->stats
.rxxoff
++;
3330 stl_cd1400ccrwait(portp
);
3332 BRDDISABLE(portp
->brdnr
);
3333 spin_unlock_irqrestore(&brd_lock
, flags
);
3336 /*****************************************************************************/
3338 static void stl_cd1400flush(struct stlport
*portp
)
3340 unsigned long flags
;
3342 pr_debug("stl_cd1400flush(portp=%p)\n", portp
);
3347 spin_lock_irqsave(&brd_lock
, flags
);
3348 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
3349 stl_cd1400setreg(portp
, CAR
, (portp
->portnr
& 0x03));
3350 stl_cd1400ccrwait(portp
);
3351 stl_cd1400setreg(portp
, CCR
, CCR_TXFLUSHFIFO
);
3352 stl_cd1400ccrwait(portp
);
3353 portp
->tx
.tail
= portp
->tx
.head
;
3354 BRDDISABLE(portp
->brdnr
);
3355 spin_unlock_irqrestore(&brd_lock
, flags
);
3358 /*****************************************************************************/
3361 * Return the current state of data flow on this port. This is only
3362 * really interresting when determining if data has fully completed
3363 * transmission or not... This is easy for the cd1400, it accurately
3364 * maintains the busy port flag.
3367 static int stl_cd1400datastate(struct stlport
*portp
)
3369 pr_debug("stl_cd1400datastate(portp=%p)\n", portp
);
3374 return test_bit(ASYI_TXBUSY
, &portp
->istate
) ? 1 : 0;
3377 /*****************************************************************************/
3380 * Interrupt service routine for cd1400 EasyIO boards.
3383 static void stl_cd1400eiointr(struct stlpanel
*panelp
, unsigned int iobase
)
3385 unsigned char svrtype
;
3387 pr_debug("stl_cd1400eiointr(panelp=%p,iobase=%x)\n", panelp
, iobase
);
3389 spin_lock(&brd_lock
);
3391 svrtype
= inb(iobase
+ EREG_DATA
);
3392 if (panelp
->nrports
> 4) {
3393 outb((SVRR
+ 0x80), iobase
);
3394 svrtype
|= inb(iobase
+ EREG_DATA
);
3397 if (svrtype
& SVRR_RX
)
3398 stl_cd1400rxisr(panelp
, iobase
);
3399 else if (svrtype
& SVRR_TX
)
3400 stl_cd1400txisr(panelp
, iobase
);
3401 else if (svrtype
& SVRR_MDM
)
3402 stl_cd1400mdmisr(panelp
, iobase
);
3404 spin_unlock(&brd_lock
);
3407 /*****************************************************************************/
3410 * Interrupt service routine for cd1400 panels.
3413 static void stl_cd1400echintr(struct stlpanel
*panelp
, unsigned int iobase
)
3415 unsigned char svrtype
;
3417 pr_debug("stl_cd1400echintr(panelp=%p,iobase=%x)\n", panelp
, iobase
);
3420 svrtype
= inb(iobase
+ EREG_DATA
);
3421 outb((SVRR
+ 0x80), iobase
);
3422 svrtype
|= inb(iobase
+ EREG_DATA
);
3423 if (svrtype
& SVRR_RX
)
3424 stl_cd1400rxisr(panelp
, iobase
);
3425 else if (svrtype
& SVRR_TX
)
3426 stl_cd1400txisr(panelp
, iobase
);
3427 else if (svrtype
& SVRR_MDM
)
3428 stl_cd1400mdmisr(panelp
, iobase
);
3432 /*****************************************************************************/
3435 * Unfortunately we need to handle breaks in the TX data stream, since
3436 * this is the only way to generate them on the cd1400.
3439 static int stl_cd1400breakisr(struct stlport
*portp
, int ioaddr
)
3441 if (portp
->brklen
== 1) {
3442 outb((COR2
+ portp
->uartaddr
), ioaddr
);
3443 outb((inb(ioaddr
+ EREG_DATA
) | COR2_ETC
),
3444 (ioaddr
+ EREG_DATA
));
3445 outb((TDR
+ portp
->uartaddr
), ioaddr
);
3446 outb(ETC_CMD
, (ioaddr
+ EREG_DATA
));
3447 outb(ETC_STARTBREAK
, (ioaddr
+ EREG_DATA
));
3448 outb((SRER
+ portp
->uartaddr
), ioaddr
);
3449 outb((inb(ioaddr
+ EREG_DATA
) & ~(SRER_TXDATA
| SRER_TXEMPTY
)),
3450 (ioaddr
+ EREG_DATA
));
3452 } else if (portp
->brklen
> 1) {
3453 outb((TDR
+ portp
->uartaddr
), ioaddr
);
3454 outb(ETC_CMD
, (ioaddr
+ EREG_DATA
));
3455 outb(ETC_STOPBREAK
, (ioaddr
+ EREG_DATA
));
3459 outb((COR2
+ portp
->uartaddr
), ioaddr
);
3460 outb((inb(ioaddr
+ EREG_DATA
) & ~COR2_ETC
),
3461 (ioaddr
+ EREG_DATA
));
3467 /*****************************************************************************/
3470 * Transmit interrupt handler. This has gotta be fast! Handling TX
3471 * chars is pretty simple, stuff as many as possible from the TX buffer
3472 * into the cd1400 FIFO. Must also handle TX breaks here, since they
3473 * are embedded as commands in the data stream. Oh no, had to use a goto!
3474 * This could be optimized more, will do when I get time...
3475 * In practice it is possible that interrupts are enabled but that the
3476 * port has been hung up. Need to handle not having any TX buffer here,
3477 * this is done by using the side effect that head and tail will also
3478 * be NULL if the buffer has been freed.
3481 static void stl_cd1400txisr(struct stlpanel
*panelp
, int ioaddr
)
3483 struct stlport
*portp
;
3486 unsigned char ioack
, srer
;
3488 pr_debug("stl_cd1400txisr(panelp=%p,ioaddr=%x)\n", panelp
, ioaddr
);
3490 ioack
= inb(ioaddr
+ EREG_TXACK
);
3491 if (((ioack
& panelp
->ackmask
) != 0) ||
3492 ((ioack
& ACK_TYPMASK
) != ACK_TYPTX
)) {
3493 printk("STALLION: bad TX interrupt ack value=%x\n", ioack
);
3496 portp
= panelp
->ports
[(ioack
>> 3)];
3499 * Unfortunately we need to handle breaks in the data stream, since
3500 * this is the only way to generate them on the cd1400. Do it now if
3501 * a break is to be sent.
3503 if (portp
->brklen
!= 0)
3504 if (stl_cd1400breakisr(portp
, ioaddr
))
3507 head
= portp
->tx
.head
;
3508 tail
= portp
->tx
.tail
;
3509 len
= (head
>= tail
) ? (head
- tail
) : (STL_TXBUFSIZE
- (tail
- head
));
3510 if ((len
== 0) || ((len
< STL_TXBUFLOW
) &&
3511 (test_bit(ASYI_TXLOW
, &portp
->istate
) == 0))) {
3512 set_bit(ASYI_TXLOW
, &portp
->istate
);
3514 tty_wakeup(portp
->tty
);
3518 outb((SRER
+ portp
->uartaddr
), ioaddr
);
3519 srer
= inb(ioaddr
+ EREG_DATA
);
3520 if (srer
& SRER_TXDATA
) {
3521 srer
= (srer
& ~SRER_TXDATA
) | SRER_TXEMPTY
;
3523 srer
&= ~(SRER_TXDATA
| SRER_TXEMPTY
);
3524 clear_bit(ASYI_TXBUSY
, &portp
->istate
);
3526 outb(srer
, (ioaddr
+ EREG_DATA
));
3528 len
= min(len
, CD1400_TXFIFOSIZE
);
3529 portp
->stats
.txtotal
+= len
;
3530 stlen
= min_t(unsigned int, len
,
3531 (portp
->tx
.buf
+ STL_TXBUFSIZE
) - tail
);
3532 outb((TDR
+ portp
->uartaddr
), ioaddr
);
3533 outsb((ioaddr
+ EREG_DATA
), tail
, stlen
);
3536 if (tail
>= (portp
->tx
.buf
+ STL_TXBUFSIZE
))
3537 tail
= portp
->tx
.buf
;
3539 outsb((ioaddr
+ EREG_DATA
), tail
, len
);
3542 portp
->tx
.tail
= tail
;
3546 outb((EOSRR
+ portp
->uartaddr
), ioaddr
);
3547 outb(0, (ioaddr
+ EREG_DATA
));
3550 /*****************************************************************************/
3553 * Receive character interrupt handler. Determine if we have good chars
3554 * or bad chars and then process appropriately. Good chars are easy
3555 * just shove the lot into the RX buffer and set all status byte to 0.
3556 * If a bad RX char then process as required. This routine needs to be
3557 * fast! In practice it is possible that we get an interrupt on a port
3558 * that is closed. This can happen on hangups - since they completely
3559 * shutdown a port not in user context. Need to handle this case.
3562 static void stl_cd1400rxisr(struct stlpanel
*panelp
, int ioaddr
)
3564 struct stlport
*portp
;
3565 struct tty_struct
*tty
;
3566 unsigned int ioack
, len
, buflen
;
3567 unsigned char status
;
3570 pr_debug("stl_cd1400rxisr(panelp=%p,ioaddr=%x)\n", panelp
, ioaddr
);
3572 ioack
= inb(ioaddr
+ EREG_RXACK
);
3573 if ((ioack
& panelp
->ackmask
) != 0) {
3574 printk("STALLION: bad RX interrupt ack value=%x\n", ioack
);
3577 portp
= panelp
->ports
[(ioack
>> 3)];
3580 if ((ioack
& ACK_TYPMASK
) == ACK_TYPRXGOOD
) {
3581 outb((RDCR
+ portp
->uartaddr
), ioaddr
);
3582 len
= inb(ioaddr
+ EREG_DATA
);
3583 if (tty
== NULL
|| (buflen
= tty_buffer_request_room(tty
, len
)) == 0) {
3584 len
= min_t(unsigned int, len
, sizeof(stl_unwanted
));
3585 outb((RDSR
+ portp
->uartaddr
), ioaddr
);
3586 insb((ioaddr
+ EREG_DATA
), &stl_unwanted
[0], len
);
3587 portp
->stats
.rxlost
+= len
;
3588 portp
->stats
.rxtotal
+= len
;
3590 len
= min(len
, buflen
);
3593 outb((RDSR
+ portp
->uartaddr
), ioaddr
);
3594 tty_prepare_flip_string(tty
, &ptr
, len
);
3595 insb((ioaddr
+ EREG_DATA
), ptr
, len
);
3596 tty_schedule_flip(tty
);
3597 portp
->stats
.rxtotal
+= len
;
3600 } else if ((ioack
& ACK_TYPMASK
) == ACK_TYPRXBAD
) {
3601 outb((RDSR
+ portp
->uartaddr
), ioaddr
);
3602 status
= inb(ioaddr
+ EREG_DATA
);
3603 ch
= inb(ioaddr
+ EREG_DATA
);
3604 if (status
& ST_PARITY
)
3605 portp
->stats
.rxparity
++;
3606 if (status
& ST_FRAMING
)
3607 portp
->stats
.rxframing
++;
3608 if (status
& ST_OVERRUN
)
3609 portp
->stats
.rxoverrun
++;
3610 if (status
& ST_BREAK
)
3611 portp
->stats
.rxbreaks
++;
3612 if (status
& ST_SCHARMASK
) {
3613 if ((status
& ST_SCHARMASK
) == ST_SCHAR1
)
3614 portp
->stats
.txxon
++;
3615 if ((status
& ST_SCHARMASK
) == ST_SCHAR2
)
3616 portp
->stats
.txxoff
++;
3619 if (tty
!= NULL
&& (portp
->rxignoremsk
& status
) == 0) {
3620 if (portp
->rxmarkmsk
& status
) {
3621 if (status
& ST_BREAK
) {
3623 if (portp
->flags
& ASYNC_SAK
) {
3625 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
3627 } else if (status
& ST_PARITY
)
3628 status
= TTY_PARITY
;
3629 else if (status
& ST_FRAMING
)
3631 else if(status
& ST_OVERRUN
)
3632 status
= TTY_OVERRUN
;
3637 tty_insert_flip_char(tty
, ch
, status
);
3638 tty_schedule_flip(tty
);
3641 printk("STALLION: bad RX interrupt ack value=%x\n", ioack
);
3646 outb((EOSRR
+ portp
->uartaddr
), ioaddr
);
3647 outb(0, (ioaddr
+ EREG_DATA
));
3650 /*****************************************************************************/
3653 * Modem interrupt handler. The is called when the modem signal line
3654 * (DCD) has changed state. Leave most of the work to the off-level
3655 * processing routine.
3658 static void stl_cd1400mdmisr(struct stlpanel
*panelp
, int ioaddr
)
3660 struct stlport
*portp
;
3664 pr_debug("stl_cd1400mdmisr(panelp=%p)\n", panelp
);
3666 ioack
= inb(ioaddr
+ EREG_MDACK
);
3667 if (((ioack
& panelp
->ackmask
) != 0) ||
3668 ((ioack
& ACK_TYPMASK
) != ACK_TYPMDM
)) {
3669 printk("STALLION: bad MODEM interrupt ack value=%x\n", ioack
);
3672 portp
= panelp
->ports
[(ioack
>> 3)];
3674 outb((MISR
+ portp
->uartaddr
), ioaddr
);
3675 misr
= inb(ioaddr
+ EREG_DATA
);
3676 if (misr
& MISR_DCD
) {
3677 stl_cd_change(portp
);
3678 portp
->stats
.modem
++;
3681 outb((EOSRR
+ portp
->uartaddr
), ioaddr
);
3682 outb(0, (ioaddr
+ EREG_DATA
));
3685 /*****************************************************************************/
3686 /* SC26198 HARDWARE FUNCTIONS */
3687 /*****************************************************************************/
3690 * These functions get/set/update the registers of the sc26198 UARTs.
3691 * Access to the sc26198 registers is via an address/data io port pair.
3692 * (Maybe should make this inline...)
3695 static int stl_sc26198getreg(struct stlport
*portp
, int regnr
)
3697 outb((regnr
| portp
->uartaddr
), (portp
->ioaddr
+ XP_ADDR
));
3698 return inb(portp
->ioaddr
+ XP_DATA
);
3701 static void stl_sc26198setreg(struct stlport
*portp
, int regnr
, int value
)
3703 outb((regnr
| portp
->uartaddr
), (portp
->ioaddr
+ XP_ADDR
));
3704 outb(value
, (portp
->ioaddr
+ XP_DATA
));
3707 static int stl_sc26198updatereg(struct stlport
*portp
, int regnr
, int value
)
3709 outb((regnr
| portp
->uartaddr
), (portp
->ioaddr
+ XP_ADDR
));
3710 if (inb(portp
->ioaddr
+ XP_DATA
) != value
) {
3711 outb(value
, (portp
->ioaddr
+ XP_DATA
));
3717 /*****************************************************************************/
3720 * Functions to get and set the sc26198 global registers.
3723 static int stl_sc26198getglobreg(struct stlport
*portp
, int regnr
)
3725 outb(regnr
, (portp
->ioaddr
+ XP_ADDR
));
3726 return inb(portp
->ioaddr
+ XP_DATA
);
3730 static void stl_sc26198setglobreg(struct stlport
*portp
, int regnr
, int value
)
3732 outb(regnr
, (portp
->ioaddr
+ XP_ADDR
));
3733 outb(value
, (portp
->ioaddr
+ XP_DATA
));
3737 /*****************************************************************************/
3740 * Inbitialize the UARTs in a panel. We don't care what sort of board
3741 * these ports are on - since the port io registers are almost
3742 * identical when dealing with ports.
3745 static int stl_sc26198panelinit(struct stlbrd
*brdp
, struct stlpanel
*panelp
)
3748 int nrchips
, ioaddr
;
3750 pr_debug("stl_sc26198panelinit(brdp=%p,panelp=%p)\n", brdp
, panelp
);
3752 BRDENABLE(panelp
->brdnr
, panelp
->pagenr
);
3755 * Check that each chip is present and started up OK.
3758 nrchips
= (panelp
->nrports
+ 4) / SC26198_PORTS
;
3759 if (brdp
->brdtype
== BRD_ECHPCI
)
3760 outb(panelp
->pagenr
, brdp
->ioctrl
);
3762 for (i
= 0; i
< nrchips
; i
++) {
3763 ioaddr
= panelp
->iobase
+ (i
* 4);
3764 outb(SCCR
, (ioaddr
+ XP_ADDR
));
3765 outb(CR_RESETALL
, (ioaddr
+ XP_DATA
));
3766 outb(TSTR
, (ioaddr
+ XP_ADDR
));
3767 if (inb(ioaddr
+ XP_DATA
) != 0) {
3768 printk("STALLION: sc26198 not responding, "
3769 "brd=%d panel=%d chip=%d\n",
3770 panelp
->brdnr
, panelp
->panelnr
, i
);
3773 chipmask
|= (0x1 << i
);
3774 outb(GCCR
, (ioaddr
+ XP_ADDR
));
3775 outb(GCCR_IVRTYPCHANACK
, (ioaddr
+ XP_DATA
));
3776 outb(WDTRCR
, (ioaddr
+ XP_ADDR
));
3777 outb(0xff, (ioaddr
+ XP_DATA
));
3780 BRDDISABLE(panelp
->brdnr
);
3784 /*****************************************************************************/
3787 * Initialize hardware specific port registers.
3790 static void stl_sc26198portinit(struct stlbrd
*brdp
, struct stlpanel
*panelp
, struct stlport
*portp
)
3792 pr_debug("stl_sc26198portinit(brdp=%p,panelp=%p,portp=%p)\n", brdp
,
3795 if ((brdp
== NULL
) || (panelp
== NULL
) ||
3799 portp
->ioaddr
= panelp
->iobase
+ ((portp
->portnr
< 8) ? 0 : 4);
3800 portp
->uartaddr
= (portp
->portnr
& 0x07) << 4;
3801 portp
->pagenr
= panelp
->pagenr
;
3804 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
3805 stl_sc26198setreg(portp
, IOPCR
, IOPCR_SETSIGS
);
3806 BRDDISABLE(portp
->brdnr
);
3809 /*****************************************************************************/
3812 * Set up the sc26198 registers for a port based on the termios port
3816 static void stl_sc26198setport(struct stlport
*portp
, struct ktermios
*tiosp
)
3818 struct stlbrd
*brdp
;
3819 unsigned long flags
;
3820 unsigned int baudrate
;
3821 unsigned char mr0
, mr1
, mr2
, clk
;
3822 unsigned char imron
, imroff
, iopr
, ipr
;
3832 brdp
= stl_brds
[portp
->brdnr
];
3837 * Set up the RX char ignore mask with those RX error types we
3840 portp
->rxignoremsk
= 0;
3841 if (tiosp
->c_iflag
& IGNPAR
)
3842 portp
->rxignoremsk
|= (SR_RXPARITY
| SR_RXFRAMING
|
3844 if (tiosp
->c_iflag
& IGNBRK
)
3845 portp
->rxignoremsk
|= SR_RXBREAK
;
3847 portp
->rxmarkmsk
= SR_RXOVERRUN
;
3848 if (tiosp
->c_iflag
& (INPCK
| PARMRK
))
3849 portp
->rxmarkmsk
|= (SR_RXPARITY
| SR_RXFRAMING
);
3850 if (tiosp
->c_iflag
& BRKINT
)
3851 portp
->rxmarkmsk
|= SR_RXBREAK
;
3854 * Go through the char size, parity and stop bits and set all the
3855 * option register appropriately.
3857 switch (tiosp
->c_cflag
& CSIZE
) {
3872 if (tiosp
->c_cflag
& CSTOPB
)
3877 if (tiosp
->c_cflag
& PARENB
) {
3878 if (tiosp
->c_cflag
& PARODD
)
3879 mr1
|= (MR1_PARENB
| MR1_PARODD
);
3881 mr1
|= (MR1_PARENB
| MR1_PAREVEN
);
3885 mr1
|= MR1_ERRBLOCK
;
3888 * Set the RX FIFO threshold at 8 chars. This gives a bit of breathing
3889 * space for hardware flow control and the like. This should be set to
3892 mr2
|= MR2_RXFIFOHALF
;
3895 * Calculate the baud rate timers. For now we will just assume that
3896 * the input and output baud are the same. The sc26198 has a fixed
3897 * baud rate table, so only discrete baud rates possible.
3899 baudrate
= tiosp
->c_cflag
& CBAUD
;
3900 if (baudrate
& CBAUDEX
) {
3901 baudrate
&= ~CBAUDEX
;
3902 if ((baudrate
< 1) || (baudrate
> 4))
3903 tiosp
->c_cflag
&= ~CBAUDEX
;
3907 baudrate
= stl_baudrates
[baudrate
];
3908 if ((tiosp
->c_cflag
& CBAUD
) == B38400
) {
3909 if ((portp
->flags
& ASYNC_SPD_MASK
) == ASYNC_SPD_HI
)
3911 else if ((portp
->flags
& ASYNC_SPD_MASK
) == ASYNC_SPD_VHI
)
3913 else if ((portp
->flags
& ASYNC_SPD_MASK
) == ASYNC_SPD_SHI
)
3915 else if ((portp
->flags
& ASYNC_SPD_MASK
) == ASYNC_SPD_WARP
)
3917 else if ((portp
->flags
& ASYNC_SPD_MASK
) == ASYNC_SPD_CUST
)
3918 baudrate
= (portp
->baud_base
/ portp
->custom_divisor
);
3920 if (baudrate
> STL_SC26198MAXBAUD
)
3921 baudrate
= STL_SC26198MAXBAUD
;
3924 for (clk
= 0; clk
< SC26198_NRBAUDS
; clk
++)
3925 if (baudrate
<= sc26198_baudtable
[clk
])
3929 * Check what form of modem signaling is required and set it up.
3931 if (tiosp
->c_cflag
& CLOCAL
) {
3932 portp
->flags
&= ~ASYNC_CHECK_CD
;
3934 iopr
|= IOPR_DCDCOS
;
3936 portp
->flags
|= ASYNC_CHECK_CD
;
3940 * Setup sc26198 enhanced modes if we can. In particular we want to
3941 * handle as much of the flow control as possible automatically. As
3942 * well as saving a few CPU cycles it will also greatly improve flow
3943 * control reliability.
3945 if (tiosp
->c_iflag
& IXON
) {
3946 mr0
|= MR0_SWFTX
| MR0_SWFT
;
3947 imron
|= IR_XONXOFF
;
3949 imroff
|= IR_XONXOFF
;
3951 if (tiosp
->c_iflag
& IXOFF
)
3954 if (tiosp
->c_cflag
& CRTSCTS
) {
3960 * All sc26198 register values calculated so go through and set
3964 pr_debug("SETPORT: portnr=%d panelnr=%d brdnr=%d\n",
3965 portp
->portnr
, portp
->panelnr
, portp
->brdnr
);
3966 pr_debug(" mr0=%x mr1=%x mr2=%x clk=%x\n", mr0
, mr1
, mr2
, clk
);
3967 pr_debug(" iopr=%x imron=%x imroff=%x\n", iopr
, imron
, imroff
);
3968 pr_debug(" schr1=%x schr2=%x schr3=%x schr4=%x\n",
3969 tiosp
->c_cc
[VSTART
], tiosp
->c_cc
[VSTOP
],
3970 tiosp
->c_cc
[VSTART
], tiosp
->c_cc
[VSTOP
]);
3972 spin_lock_irqsave(&brd_lock
, flags
);
3973 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
3974 stl_sc26198setreg(portp
, IMR
, 0);
3975 stl_sc26198updatereg(portp
, MR0
, mr0
);
3976 stl_sc26198updatereg(portp
, MR1
, mr1
);
3977 stl_sc26198setreg(portp
, SCCR
, CR_RXERRBLOCK
);
3978 stl_sc26198updatereg(portp
, MR2
, mr2
);
3979 stl_sc26198updatereg(portp
, IOPIOR
,
3980 ((stl_sc26198getreg(portp
, IOPIOR
) & ~IPR_CHANGEMASK
) | iopr
));
3983 stl_sc26198setreg(portp
, TXCSR
, clk
);
3984 stl_sc26198setreg(portp
, RXCSR
, clk
);
3987 stl_sc26198setreg(portp
, XONCR
, tiosp
->c_cc
[VSTART
]);
3988 stl_sc26198setreg(portp
, XOFFCR
, tiosp
->c_cc
[VSTOP
]);
3990 ipr
= stl_sc26198getreg(portp
, IPR
);
3992 portp
->sigs
&= ~TIOCM_CD
;
3994 portp
->sigs
|= TIOCM_CD
;
3996 portp
->imr
= (portp
->imr
& ~imroff
) | imron
;
3997 stl_sc26198setreg(portp
, IMR
, portp
->imr
);
3998 BRDDISABLE(portp
->brdnr
);
3999 spin_unlock_irqrestore(&brd_lock
, flags
);
4002 /*****************************************************************************/
4005 * Set the state of the DTR and RTS signals.
4008 static void stl_sc26198setsignals(struct stlport
*portp
, int dtr
, int rts
)
4010 unsigned char iopioron
, iopioroff
;
4011 unsigned long flags
;
4013 pr_debug("stl_sc26198setsignals(portp=%p,dtr=%d,rts=%d)\n", portp
,
4019 iopioroff
|= IPR_DTR
;
4021 iopioron
|= IPR_DTR
;
4023 iopioroff
|= IPR_RTS
;
4025 iopioron
|= IPR_RTS
;
4027 spin_lock_irqsave(&brd_lock
, flags
);
4028 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
4029 stl_sc26198setreg(portp
, IOPIOR
,
4030 ((stl_sc26198getreg(portp
, IOPIOR
) & ~iopioroff
) | iopioron
));
4031 BRDDISABLE(portp
->brdnr
);
4032 spin_unlock_irqrestore(&brd_lock
, flags
);
4035 /*****************************************************************************/
4038 * Return the state of the signals.
4041 static int stl_sc26198getsignals(struct stlport
*portp
)
4044 unsigned long flags
;
4047 pr_debug("stl_sc26198getsignals(portp=%p)\n", portp
);
4049 spin_lock_irqsave(&brd_lock
, flags
);
4050 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
4051 ipr
= stl_sc26198getreg(portp
, IPR
);
4052 BRDDISABLE(portp
->brdnr
);
4053 spin_unlock_irqrestore(&brd_lock
, flags
);
4056 sigs
|= (ipr
& IPR_DCD
) ? 0 : TIOCM_CD
;
4057 sigs
|= (ipr
& IPR_CTS
) ? 0 : TIOCM_CTS
;
4058 sigs
|= (ipr
& IPR_DTR
) ? 0: TIOCM_DTR
;
4059 sigs
|= (ipr
& IPR_RTS
) ? 0: TIOCM_RTS
;
4064 /*****************************************************************************/
4067 * Enable/Disable the Transmitter and/or Receiver.
4070 static void stl_sc26198enablerxtx(struct stlport
*portp
, int rx
, int tx
)
4073 unsigned long flags
;
4075 pr_debug("stl_sc26198enablerxtx(portp=%p,rx=%d,tx=%d)\n", portp
, rx
,tx
);
4077 ccr
= portp
->crenable
;
4079 ccr
&= ~CR_TXENABLE
;
4083 ccr
&= ~CR_RXENABLE
;
4087 spin_lock_irqsave(&brd_lock
, flags
);
4088 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
4089 stl_sc26198setreg(portp
, SCCR
, ccr
);
4090 BRDDISABLE(portp
->brdnr
);
4091 portp
->crenable
= ccr
;
4092 spin_unlock_irqrestore(&brd_lock
, flags
);
4095 /*****************************************************************************/
4098 * Start/stop the Transmitter and/or Receiver.
4101 static void stl_sc26198startrxtx(struct stlport
*portp
, int rx
, int tx
)
4104 unsigned long flags
;
4106 pr_debug("stl_sc26198startrxtx(portp=%p,rx=%d,tx=%d)\n", portp
, rx
, tx
);
4114 imr
&= ~(IR_RXRDY
| IR_RXBREAK
| IR_RXWATCHDOG
);
4116 imr
|= IR_RXRDY
| IR_RXBREAK
| IR_RXWATCHDOG
;
4118 spin_lock_irqsave(&brd_lock
, flags
);
4119 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
4120 stl_sc26198setreg(portp
, IMR
, imr
);
4121 BRDDISABLE(portp
->brdnr
);
4124 set_bit(ASYI_TXBUSY
, &portp
->istate
);
4125 spin_unlock_irqrestore(&brd_lock
, flags
);
4128 /*****************************************************************************/
4131 * Disable all interrupts from this port.
4134 static void stl_sc26198disableintrs(struct stlport
*portp
)
4136 unsigned long flags
;
4138 pr_debug("stl_sc26198disableintrs(portp=%p)\n", portp
);
4140 spin_lock_irqsave(&brd_lock
, flags
);
4141 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
4143 stl_sc26198setreg(portp
, IMR
, 0);
4144 BRDDISABLE(portp
->brdnr
);
4145 spin_unlock_irqrestore(&brd_lock
, flags
);
4148 /*****************************************************************************/
4150 static void stl_sc26198sendbreak(struct stlport
*portp
, int len
)
4152 unsigned long flags
;
4154 pr_debug("stl_sc26198sendbreak(portp=%p,len=%d)\n", portp
, len
);
4156 spin_lock_irqsave(&brd_lock
, flags
);
4157 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
4159 stl_sc26198setreg(portp
, SCCR
, CR_TXSTARTBREAK
);
4160 portp
->stats
.txbreaks
++;
4162 stl_sc26198setreg(portp
, SCCR
, CR_TXSTOPBREAK
);
4164 BRDDISABLE(portp
->brdnr
);
4165 spin_unlock_irqrestore(&brd_lock
, flags
);
4168 /*****************************************************************************/
4171 * Take flow control actions...
4174 static void stl_sc26198flowctrl(struct stlport
*portp
, int state
)
4176 struct tty_struct
*tty
;
4177 unsigned long flags
;
4180 pr_debug("stl_sc26198flowctrl(portp=%p,state=%x)\n", portp
, state
);
4188 spin_lock_irqsave(&brd_lock
, flags
);
4189 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
4192 if (tty
->termios
->c_iflag
& IXOFF
) {
4193 mr0
= stl_sc26198getreg(portp
, MR0
);
4194 stl_sc26198setreg(portp
, MR0
, (mr0
& ~MR0_SWFRXTX
));
4195 stl_sc26198setreg(portp
, SCCR
, CR_TXSENDXON
);
4197 portp
->stats
.rxxon
++;
4198 stl_sc26198wait(portp
);
4199 stl_sc26198setreg(portp
, MR0
, mr0
);
4202 * Question: should we return RTS to what it was before? It may
4203 * have been set by an ioctl... Suppose not, since if you have
4204 * hardware flow control set then it is pretty silly to go and
4205 * set the RTS line by hand.
4207 if (tty
->termios
->c_cflag
& CRTSCTS
) {
4208 stl_sc26198setreg(portp
, MR1
,
4209 (stl_sc26198getreg(portp
, MR1
) | MR1_AUTORTS
));
4210 stl_sc26198setreg(portp
, IOPIOR
,
4211 (stl_sc26198getreg(portp
, IOPIOR
) | IOPR_RTS
));
4212 portp
->stats
.rxrtson
++;
4215 if (tty
->termios
->c_iflag
& IXOFF
) {
4216 mr0
= stl_sc26198getreg(portp
, MR0
);
4217 stl_sc26198setreg(portp
, MR0
, (mr0
& ~MR0_SWFRXTX
));
4218 stl_sc26198setreg(portp
, SCCR
, CR_TXSENDXOFF
);
4220 portp
->stats
.rxxoff
++;
4221 stl_sc26198wait(portp
);
4222 stl_sc26198setreg(portp
, MR0
, mr0
);
4224 if (tty
->termios
->c_cflag
& CRTSCTS
) {
4225 stl_sc26198setreg(portp
, MR1
,
4226 (stl_sc26198getreg(portp
, MR1
) & ~MR1_AUTORTS
));
4227 stl_sc26198setreg(portp
, IOPIOR
,
4228 (stl_sc26198getreg(portp
, IOPIOR
) & ~IOPR_RTS
));
4229 portp
->stats
.rxrtsoff
++;
4233 BRDDISABLE(portp
->brdnr
);
4234 spin_unlock_irqrestore(&brd_lock
, flags
);
4237 /*****************************************************************************/
4240 * Send a flow control character.
4243 static void stl_sc26198sendflow(struct stlport
*portp
, int state
)
4245 struct tty_struct
*tty
;
4246 unsigned long flags
;
4249 pr_debug("stl_sc26198sendflow(portp=%p,state=%x)\n", portp
, state
);
4257 spin_lock_irqsave(&brd_lock
, flags
);
4258 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
4260 mr0
= stl_sc26198getreg(portp
, MR0
);
4261 stl_sc26198setreg(portp
, MR0
, (mr0
& ~MR0_SWFRXTX
));
4262 stl_sc26198setreg(portp
, SCCR
, CR_TXSENDXON
);
4264 portp
->stats
.rxxon
++;
4265 stl_sc26198wait(portp
);
4266 stl_sc26198setreg(portp
, MR0
, mr0
);
4268 mr0
= stl_sc26198getreg(portp
, MR0
);
4269 stl_sc26198setreg(portp
, MR0
, (mr0
& ~MR0_SWFRXTX
));
4270 stl_sc26198setreg(portp
, SCCR
, CR_TXSENDXOFF
);
4272 portp
->stats
.rxxoff
++;
4273 stl_sc26198wait(portp
);
4274 stl_sc26198setreg(portp
, MR0
, mr0
);
4276 BRDDISABLE(portp
->brdnr
);
4277 spin_unlock_irqrestore(&brd_lock
, flags
);
4280 /*****************************************************************************/
4282 static void stl_sc26198flush(struct stlport
*portp
)
4284 unsigned long flags
;
4286 pr_debug("stl_sc26198flush(portp=%p)\n", portp
);
4291 spin_lock_irqsave(&brd_lock
, flags
);
4292 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
4293 stl_sc26198setreg(portp
, SCCR
, CR_TXRESET
);
4294 stl_sc26198setreg(portp
, SCCR
, portp
->crenable
);
4295 BRDDISABLE(portp
->brdnr
);
4296 portp
->tx
.tail
= portp
->tx
.head
;
4297 spin_unlock_irqrestore(&brd_lock
, flags
);
4300 /*****************************************************************************/
4303 * Return the current state of data flow on this port. This is only
4304 * really interresting when determining if data has fully completed
4305 * transmission or not... The sc26198 interrupt scheme cannot
4306 * determine when all data has actually drained, so we need to
4307 * check the port statusy register to be sure.
4310 static int stl_sc26198datastate(struct stlport
*portp
)
4312 unsigned long flags
;
4315 pr_debug("stl_sc26198datastate(portp=%p)\n", portp
);
4319 if (test_bit(ASYI_TXBUSY
, &portp
->istate
))
4322 spin_lock_irqsave(&brd_lock
, flags
);
4323 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
4324 sr
= stl_sc26198getreg(portp
, SR
);
4325 BRDDISABLE(portp
->brdnr
);
4326 spin_unlock_irqrestore(&brd_lock
, flags
);
4328 return (sr
& SR_TXEMPTY
) ? 0 : 1;
4331 /*****************************************************************************/
4334 * Delay for a small amount of time, to give the sc26198 a chance
4335 * to process a command...
4338 static void stl_sc26198wait(struct stlport
*portp
)
4342 pr_debug("stl_sc26198wait(portp=%p)\n", portp
);
4347 for (i
= 0; i
< 20; i
++)
4348 stl_sc26198getglobreg(portp
, TSTR
);
4351 /*****************************************************************************/
4354 * If we are TX flow controlled and in IXANY mode then we may
4355 * need to unflow control here. We gotta do this because of the
4356 * automatic flow control modes of the sc26198.
4359 static void stl_sc26198txunflow(struct stlport
*portp
, struct tty_struct
*tty
)
4363 mr0
= stl_sc26198getreg(portp
, MR0
);
4364 stl_sc26198setreg(portp
, MR0
, (mr0
& ~MR0_SWFRXTX
));
4365 stl_sc26198setreg(portp
, SCCR
, CR_HOSTXON
);
4366 stl_sc26198wait(portp
);
4367 stl_sc26198setreg(portp
, MR0
, mr0
);
4368 clear_bit(ASYI_TXFLOWED
, &portp
->istate
);
4371 /*****************************************************************************/
4374 * Interrupt service routine for sc26198 panels.
4377 static void stl_sc26198intr(struct stlpanel
*panelp
, unsigned int iobase
)
4379 struct stlport
*portp
;
4382 spin_lock(&brd_lock
);
4385 * Work around bug in sc26198 chip... Cannot have A6 address
4386 * line of UART high, else iack will be returned as 0.
4388 outb(0, (iobase
+ 1));
4390 iack
= inb(iobase
+ XP_IACK
);
4391 portp
= panelp
->ports
[(iack
& IVR_CHANMASK
) + ((iobase
& 0x4) << 1)];
4393 if (iack
& IVR_RXDATA
)
4394 stl_sc26198rxisr(portp
, iack
);
4395 else if (iack
& IVR_TXDATA
)
4396 stl_sc26198txisr(portp
);
4398 stl_sc26198otherisr(portp
, iack
);
4400 spin_unlock(&brd_lock
);
4403 /*****************************************************************************/
4406 * Transmit interrupt handler. This has gotta be fast! Handling TX
4407 * chars is pretty simple, stuff as many as possible from the TX buffer
4408 * into the sc26198 FIFO.
4409 * In practice it is possible that interrupts are enabled but that the
4410 * port has been hung up. Need to handle not having any TX buffer here,
4411 * this is done by using the side effect that head and tail will also
4412 * be NULL if the buffer has been freed.
4415 static void stl_sc26198txisr(struct stlport
*portp
)
4417 unsigned int ioaddr
;
4422 pr_debug("stl_sc26198txisr(portp=%p)\n", portp
);
4424 ioaddr
= portp
->ioaddr
;
4425 head
= portp
->tx
.head
;
4426 tail
= portp
->tx
.tail
;
4427 len
= (head
>= tail
) ? (head
- tail
) : (STL_TXBUFSIZE
- (tail
- head
));
4428 if ((len
== 0) || ((len
< STL_TXBUFLOW
) &&
4429 (test_bit(ASYI_TXLOW
, &portp
->istate
) == 0))) {
4430 set_bit(ASYI_TXLOW
, &portp
->istate
);
4432 tty_wakeup(portp
->tty
);
4436 outb((MR0
| portp
->uartaddr
), (ioaddr
+ XP_ADDR
));
4437 mr0
= inb(ioaddr
+ XP_DATA
);
4438 if ((mr0
& MR0_TXMASK
) == MR0_TXEMPTY
) {
4439 portp
->imr
&= ~IR_TXRDY
;
4440 outb((IMR
| portp
->uartaddr
), (ioaddr
+ XP_ADDR
));
4441 outb(portp
->imr
, (ioaddr
+ XP_DATA
));
4442 clear_bit(ASYI_TXBUSY
, &portp
->istate
);
4444 mr0
|= ((mr0
& ~MR0_TXMASK
) | MR0_TXEMPTY
);
4445 outb(mr0
, (ioaddr
+ XP_DATA
));
4448 len
= min(len
, SC26198_TXFIFOSIZE
);
4449 portp
->stats
.txtotal
+= len
;
4450 stlen
= min_t(unsigned int, len
,
4451 (portp
->tx
.buf
+ STL_TXBUFSIZE
) - tail
);
4452 outb(GTXFIFO
, (ioaddr
+ XP_ADDR
));
4453 outsb((ioaddr
+ XP_DATA
), tail
, stlen
);
4456 if (tail
>= (portp
->tx
.buf
+ STL_TXBUFSIZE
))
4457 tail
= portp
->tx
.buf
;
4459 outsb((ioaddr
+ XP_DATA
), tail
, len
);
4462 portp
->tx
.tail
= tail
;
4466 /*****************************************************************************/
4469 * Receive character interrupt handler. Determine if we have good chars
4470 * or bad chars and then process appropriately. Good chars are easy
4471 * just shove the lot into the RX buffer and set all status byte to 0.
4472 * If a bad RX char then process as required. This routine needs to be
4473 * fast! In practice it is possible that we get an interrupt on a port
4474 * that is closed. This can happen on hangups - since they completely
4475 * shutdown a port not in user context. Need to handle this case.
4478 static void stl_sc26198rxisr(struct stlport
*portp
, unsigned int iack
)
4480 struct tty_struct
*tty
;
4481 unsigned int len
, buflen
, ioaddr
;
4483 pr_debug("stl_sc26198rxisr(portp=%p,iack=%x)\n", portp
, iack
);
4486 ioaddr
= portp
->ioaddr
;
4487 outb(GIBCR
, (ioaddr
+ XP_ADDR
));
4488 len
= inb(ioaddr
+ XP_DATA
) + 1;
4490 if ((iack
& IVR_TYPEMASK
) == IVR_RXDATA
) {
4491 if (tty
== NULL
|| (buflen
= tty_buffer_request_room(tty
, len
)) == 0) {
4492 len
= min_t(unsigned int, len
, sizeof(stl_unwanted
));
4493 outb(GRXFIFO
, (ioaddr
+ XP_ADDR
));
4494 insb((ioaddr
+ XP_DATA
), &stl_unwanted
[0], len
);
4495 portp
->stats
.rxlost
+= len
;
4496 portp
->stats
.rxtotal
+= len
;
4498 len
= min(len
, buflen
);
4501 outb(GRXFIFO
, (ioaddr
+ XP_ADDR
));
4502 tty_prepare_flip_string(tty
, &ptr
, len
);
4503 insb((ioaddr
+ XP_DATA
), ptr
, len
);
4504 tty_schedule_flip(tty
);
4505 portp
->stats
.rxtotal
+= len
;
4509 stl_sc26198rxbadchars(portp
);
4513 * If we are TX flow controlled and in IXANY mode then we may need
4514 * to unflow control here. We gotta do this because of the automatic
4515 * flow control modes of the sc26198.
4517 if (test_bit(ASYI_TXFLOWED
, &portp
->istate
)) {
4518 if ((tty
!= NULL
) &&
4519 (tty
->termios
!= NULL
) &&
4520 (tty
->termios
->c_iflag
& IXANY
)) {
4521 stl_sc26198txunflow(portp
, tty
);
4526 /*****************************************************************************/
4529 * Process an RX bad character.
4532 static void stl_sc26198rxbadch(struct stlport
*portp
, unsigned char status
, char ch
)
4534 struct tty_struct
*tty
;
4535 unsigned int ioaddr
;
4538 ioaddr
= portp
->ioaddr
;
4540 if (status
& SR_RXPARITY
)
4541 portp
->stats
.rxparity
++;
4542 if (status
& SR_RXFRAMING
)
4543 portp
->stats
.rxframing
++;
4544 if (status
& SR_RXOVERRUN
)
4545 portp
->stats
.rxoverrun
++;
4546 if (status
& SR_RXBREAK
)
4547 portp
->stats
.rxbreaks
++;
4549 if ((tty
!= NULL
) &&
4550 ((portp
->rxignoremsk
& status
) == 0)) {
4551 if (portp
->rxmarkmsk
& status
) {
4552 if (status
& SR_RXBREAK
) {
4554 if (portp
->flags
& ASYNC_SAK
) {
4556 BRDENABLE(portp
->brdnr
, portp
->pagenr
);
4558 } else if (status
& SR_RXPARITY
)
4559 status
= TTY_PARITY
;
4560 else if (status
& SR_RXFRAMING
)
4562 else if(status
& SR_RXOVERRUN
)
4563 status
= TTY_OVERRUN
;
4569 tty_insert_flip_char(tty
, ch
, status
);
4570 tty_schedule_flip(tty
);
4573 portp
->stats
.rxtotal
++;
4577 /*****************************************************************************/
4580 * Process all characters in the RX FIFO of the UART. Check all char
4581 * status bytes as well, and process as required. We need to check
4582 * all bytes in the FIFO, in case some more enter the FIFO while we
4583 * are here. To get the exact character error type we need to switch
4584 * into CHAR error mode (that is why we need to make sure we empty
4588 static void stl_sc26198rxbadchars(struct stlport
*portp
)
4590 unsigned char status
, mr1
;
4594 * To get the precise error type for each character we must switch
4595 * back into CHAR error mode.
4597 mr1
= stl_sc26198getreg(portp
, MR1
);
4598 stl_sc26198setreg(portp
, MR1
, (mr1
& ~MR1_ERRBLOCK
));
4600 while ((status
= stl_sc26198getreg(portp
, SR
)) & SR_RXRDY
) {
4601 stl_sc26198setreg(portp
, SCCR
, CR_CLEARRXERR
);
4602 ch
= stl_sc26198getreg(portp
, RXFIFO
);
4603 stl_sc26198rxbadch(portp
, status
, ch
);
4607 * To get correct interrupt class we must switch back into BLOCK
4610 stl_sc26198setreg(portp
, MR1
, mr1
);
4613 /*****************************************************************************/
4616 * Other interrupt handler. This includes modem signals, flow
4617 * control actions, etc. Most stuff is left to off-level interrupt
4621 static void stl_sc26198otherisr(struct stlport
*portp
, unsigned int iack
)
4623 unsigned char cir
, ipr
, xisr
;
4625 pr_debug("stl_sc26198otherisr(portp=%p,iack=%x)\n", portp
, iack
);
4627 cir
= stl_sc26198getglobreg(portp
, CIR
);
4629 switch (cir
& CIR_SUBTYPEMASK
) {
4631 ipr
= stl_sc26198getreg(portp
, IPR
);
4632 if (ipr
& IPR_DCDCHANGE
) {
4633 stl_cd_change(portp
);
4634 portp
->stats
.modem
++;
4637 case CIR_SUBXONXOFF
:
4638 xisr
= stl_sc26198getreg(portp
, XISR
);
4639 if (xisr
& XISR_RXXONGOT
) {
4640 set_bit(ASYI_TXFLOWED
, &portp
->istate
);
4641 portp
->stats
.txxoff
++;
4643 if (xisr
& XISR_RXXOFFGOT
) {
4644 clear_bit(ASYI_TXFLOWED
, &portp
->istate
);
4645 portp
->stats
.txxon
++;
4649 stl_sc26198setreg(portp
, SCCR
, CR_BREAKRESET
);
4650 stl_sc26198rxbadchars(portp
);
4657 static void stl_free_isabrds(void)
4659 struct stlbrd
*brdp
;
4662 for (i
= 0; i
< stl_nrbrds
; i
++) {
4663 if ((brdp
= stl_brds
[i
]) == NULL
|| (brdp
->state
& STL_PROBED
))
4666 free_irq(brdp
->irq
, brdp
);
4668 stl_cleanup_panels(brdp
);
4670 release_region(brdp
->ioaddr1
, brdp
->iosize1
);
4671 if (brdp
->iosize2
> 0)
4672 release_region(brdp
->ioaddr2
, brdp
->iosize2
);
4680 * Loadable module initialization stuff.
4682 static int __init
stallion_module_init(void)
4684 struct stlbrd
*brdp
;
4685 struct stlconf conf
;
4689 printk(KERN_INFO
"%s: version %s\n", stl_drvtitle
, stl_drvversion
);
4691 spin_lock_init(&stallion_lock
);
4692 spin_lock_init(&brd_lock
);
4694 stl_serial
= alloc_tty_driver(STL_MAXBRDS
* STL_MAXPORTS
);
4700 stl_serial
->owner
= THIS_MODULE
;
4701 stl_serial
->driver_name
= stl_drvname
;
4702 stl_serial
->name
= "ttyE";
4703 stl_serial
->major
= STL_SERIALMAJOR
;
4704 stl_serial
->minor_start
= 0;
4705 stl_serial
->type
= TTY_DRIVER_TYPE_SERIAL
;
4706 stl_serial
->subtype
= SERIAL_TYPE_NORMAL
;
4707 stl_serial
->init_termios
= stl_deftermios
;
4708 stl_serial
->flags
= TTY_DRIVER_REAL_RAW
| TTY_DRIVER_DYNAMIC_DEV
;
4709 tty_set_operations(stl_serial
, &stl_ops
);
4711 retval
= tty_register_driver(stl_serial
);
4713 printk("STALLION: failed to register serial driver\n");
4718 * Find any dynamically supported boards. That is via module load
4721 for (i
= stl_nrbrds
; i
< stl_nargs
; i
++) {
4722 memset(&conf
, 0, sizeof(conf
));
4723 if (stl_parsebrd(&conf
, stl_brdsp
[i
]) == 0)
4725 if ((brdp
= stl_allocbrd()) == NULL
)
4728 brdp
->brdtype
= conf
.brdtype
;
4729 brdp
->ioaddr1
= conf
.ioaddr1
;
4730 brdp
->ioaddr2
= conf
.ioaddr2
;
4731 brdp
->irq
= conf
.irq
;
4732 brdp
->irqtype
= conf
.irqtype
;
4733 stl_brds
[brdp
->brdnr
] = brdp
;
4734 if (stl_brdinit(brdp
)) {
4735 stl_brds
[brdp
->brdnr
] = NULL
;
4738 for (j
= 0; j
< brdp
->nrports
; j
++)
4739 tty_register_device(stl_serial
,
4740 brdp
->brdnr
* STL_MAXPORTS
+ j
, NULL
);
4745 /* this has to be _after_ isa finding because of locking */
4746 retval
= pci_register_driver(&stl_pcidriver
);
4747 if (retval
&& stl_nrbrds
== 0) {
4748 printk(KERN_ERR
"STALLION: can't register pci driver\n");
4753 * Set up a character driver for per board stuff. This is mainly used
4754 * to do stats ioctls on the ports.
4756 if (register_chrdev(STL_SIOMEMMAJOR
, "staliomem", &stl_fsiomem
))
4757 printk("STALLION: failed to register serial board device\n");
4759 stallion_class
= class_create(THIS_MODULE
, "staliomem");
4760 if (IS_ERR(stallion_class
))
4761 printk("STALLION: failed to create class\n");
4762 for (i
= 0; i
< 4; i
++)
4763 device_create(stallion_class
, NULL
, MKDEV(STL_SIOMEMMAJOR
, i
),
4768 tty_unregister_driver(stl_serial
);
4770 put_tty_driver(stl_serial
);
4775 static void __exit
stallion_module_exit(void)
4777 struct stlbrd
*brdp
;
4780 pr_debug("cleanup_module()\n");
4782 printk(KERN_INFO
"Unloading %s: version %s\n", stl_drvtitle
,
4786 * Free up all allocated resources used by the ports. This includes
4787 * memory and interrupts. As part of this process we will also do
4788 * a hangup on every open port - to try to flush out any processes
4789 * hanging onto ports.
4791 for (i
= 0; i
< stl_nrbrds
; i
++) {
4792 if ((brdp
= stl_brds
[i
]) == NULL
|| (brdp
->state
& STL_PROBED
))
4794 for (j
= 0; j
< brdp
->nrports
; j
++)
4795 tty_unregister_device(stl_serial
,
4796 brdp
->brdnr
* STL_MAXPORTS
+ j
);
4799 for (i
= 0; i
< 4; i
++)
4800 device_destroy(stallion_class
, MKDEV(STL_SIOMEMMAJOR
, i
));
4801 unregister_chrdev(STL_SIOMEMMAJOR
, "staliomem");
4802 class_destroy(stallion_class
);
4804 pci_unregister_driver(&stl_pcidriver
);
4808 tty_unregister_driver(stl_serial
);
4809 put_tty_driver(stl_serial
);
4812 module_init(stallion_module_init
);
4813 module_exit(stallion_module_exit
);
4815 MODULE_AUTHOR("Greg Ungerer");
4816 MODULE_DESCRIPTION("Stallion Multiport Serial Driver");
4817 MODULE_LICENSE("GPL");