drivers/ide/q40ide.c

   1 /*
   2  *  Q40 I/O port IDE Driver
   3  *
   4  *     (c) Richard Zidlicky
   5  *
   6  *  This file is subject to the terms and conditions of the GNU General Public
   7  *  License.  See the file COPYING in the main directory of this archive for
   8  *  more details.
   9  *
  10  *
  11  */
  12
  13 #include <linux/types.h>
  14 #include <linux/mm.h>
  15 #include <linux/interrupt.h>
  16 #include <linux/blkdev.h>
  17 #include <linux/ide.h>
  18
  19     /*
  20      *  Bases of the IDE interfaces
  21      */
  22
  23 #define Q40IDE_NUM_HWIFS        2
  24
  25 #define PCIDE_BASE1     0x1f0
  26 #define PCIDE_BASE2     0x170
  27 #define PCIDE_BASE3     0x1e8
  28 #define PCIDE_BASE4     0x168
  29 #define PCIDE_BASE5     0x1e0
  30 #define PCIDE_BASE6     0x160
  31
  32 static const unsigned long pcide_bases[Q40IDE_NUM_HWIFS] = {
  33     PCIDE_BASE1, PCIDE_BASE2, /* PCIDE_BASE3, PCIDE_BASE4  , PCIDE_BASE5,
  34     PCIDE_BASE6 */
  35 };
  36
  37 static int q40ide_default_irq(unsigned long base)
  38 {
  39            switch (base) {
  40                     case 0x1f0: return 14;
  41                     case 0x170: return 15;
  42                     case 0x1e8: return 11;
  43                     default:
  44                         return 0;
  45            }
  46 }
  47
  48
  49 /*
  50  * Addresses are pretranslated for Q40 ISA access.
  51  */
  52 static void q40_ide_setup_ports(hw_regs_t *hw, unsigned long base,
  53                         ide_ack_intr_t *ack_intr,
  54                         int irq)
  55 {
  56         memset(hw, 0, sizeof(hw_regs_t));
  57         /* BIG FAT WARNING:
  58            assumption: only DATA port is ever used in 16 bit mode */
  59         hw->io_ports.data_addr = Q40_ISA_IO_W(base);
  60         hw->io_ports.error_addr = Q40_ISA_IO_B(base + 1);
  61         hw->io_ports.nsect_addr = Q40_ISA_IO_B(base + 2);
  62         hw->io_ports.lbal_addr = Q40_ISA_IO_B(base + 3);
  63         hw->io_ports.lbam_addr = Q40_ISA_IO_B(base + 4);
  64         hw->io_ports.lbah_addr = Q40_ISA_IO_B(base + 5);
  65         hw->io_ports.device_addr = Q40_ISA_IO_B(base + 6);
  66         hw->io_ports.status_addr = Q40_ISA_IO_B(base + 7);
  67         hw->io_ports.ctl_addr = Q40_ISA_IO_B(base + 0x206);
  68
  69         hw->irq = irq;
  70         hw->ack_intr = ack_intr;
  71
  72         hw->chipset = ide_generic;
  73 }
  74
  75 static void q40ide_input_data(ide_drive_t *drive, struct request *rq,
  76                               void *buf, unsigned int len)
  77 {
  78         unsigned long data_addr = drive->hwif->io_ports.data_addr;
  79
  80         if (drive->media == ide_disk && rq && rq->cmd_type == REQ_TYPE_FS)
  81                 return insw(data_addr, buf, (len + 1) / 2);
  82
  83         insw_swapw(data_addr, buf, (len + 1) / 2);
  84 }
  85
  86 static void q40ide_output_data(ide_drive_t *drive, struct request *rq,
  87                                void *buf, unsigned int len)
  88 {
  89         unsigned long data_addr = drive->hwif->io_ports.data_addr;
  90
  91         if (drive->media == ide_disk && rq && rq->cmd_type == REQ_TYPE_FS)
  92                 return outsw(data_addr, buf, (len + 1) / 2);
  93
  94         outsw_swapw(data_addr, buf, (len + 1) / 2);
  95 }
  96
  97 /* Q40 has a byte-swapped IDE interface */
  98 static const struct ide_tp_ops q40ide_tp_ops = {
  99         .exec_command           = ide_exec_command,
 100         .read_status            = ide_read_status,
 101         .read_altstatus         = ide_read_altstatus,
 102
 103         .set_irq                = ide_set_irq,
 104
 105         .tf_load                = ide_tf_load,
 106         .tf_read                = ide_tf_read,
 107
 108         .input_data             = q40ide_input_data,
 109         .output_data            = q40ide_output_data,
 110 };
 111
 112 static const struct ide_port_info q40ide_port_info = {
 113         .tp_ops                 = &q40ide_tp_ops,
 114         .host_flags             = IDE_HFLAG_NO_DMA,
 115 };
 116
 117 /*
 118  * the static array is needed to have the name reported in /proc/ioports,
 119  * hwif->name unfortunately isn't available yet
 120  */
 121 static const char *q40_ide_names[Q40IDE_NUM_HWIFS]={
 122         "ide0", "ide1"
 123 };
 124
 125 /*
 126  *  Probe for Q40 IDE interfaces
 127  */
 128
 129 static int __init q40ide_init(void)
 130 {
 131     int i;
 132     hw_regs_t hw[Q40IDE_NUM_HWIFS], *hws[] = { NULL, NULL, NULL, NULL };
 133
 134     if (!MACH_IS_Q40)
 135       return -ENODEV;
 136
 137     printk(KERN_INFO "ide: Q40 IDE controller\n");
 138
 139     for (i = 0; i < Q40IDE_NUM_HWIFS; i++) {
 140         const char *name = q40_ide_names[i];
 141
 142         if (!request_region(pcide_bases[i], 8, name)) {
 143                 printk("could not reserve ports %lx-%lx for %s\n",
 144                        pcide_bases[i],pcide_bases[i]+8,name);
 145                 continue;
 146         }
 147         if (!request_region(pcide_bases[i]+0x206, 1, name)) {
 148                 printk("could not reserve port %lx for %s\n",
 149                        pcide_bases[i]+0x206,name);
 150                 release_region(pcide_bases[i], 8);
 151                 continue;
 152         }
 153         q40_ide_setup_ports(&hw[i], pcide_bases[i], NULL,
 154                         q40ide_default_irq(pcide_bases[i]));
 155
 156         hws[i] = &hw[i];
 157     }
 158
 159     return ide_host_add(&q40ide_port_info, hws, NULL);
 160 }
 161
 162 module_init(q40ide_init);
 163
 164 MODULE_LICENSE("GPL");