?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
ACPI : Create "idle=nomwait" bootparam
[linux-2.6/mini2440.git] / drivers / ssb / driver_chipcommon.c
blob571f4fd5523652d8cba9cd420c0f6412387840af
1 /*
2 * Sonics Silicon Backplane
3 * Broadcom ChipCommon core driver
4 *
5 * Copyright 2005, Broadcom Corporation
6 * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
7 *
8 * Licensed under the GNU/GPL. See COPYING for details.
9 */
10
11 #include <linux/ssb/ssb.h>
12 #include <linux/ssb/ssb_regs.h>
13 #include <linux/pci.h>
14
15 #include "ssb_private.h"
16
17
18 /* Clock sources */
19 enum ssb_clksrc {
20 /* PCI clock */
21 SSB_CHIPCO_CLKSRC_PCI,
22 /* Crystal slow clock oscillator */
23 SSB_CHIPCO_CLKSRC_XTALOS,
24 /* Low power oscillator */
25 SSB_CHIPCO_CLKSRC_LOPWROS,
26 };
27
28
29 static inline u32 chipco_read32(struct ssb_chipcommon *cc,
30 u16 offset)
31 {
32 return ssb_read32(cc->dev, offset);
33 }
34
35 static inline void chipco_write32(struct ssb_chipcommon *cc,
36 u16 offset,
37 u32 value)
38 {
39 ssb_write32(cc->dev, offset, value);
40 }
41
42 static inline u32 chipco_write32_masked(struct ssb_chipcommon *cc, u16 offset,
43 u32 mask, u32 value)
44 {
45 value &= mask;
46 value |= chipco_read32(cc, offset) & ~mask;
47 chipco_write32(cc, offset, value);
48
49 return value;
50 }
51
52 void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc,
53 enum ssb_clkmode mode)
54 {
55 struct ssb_device *ccdev = cc->dev;
56 struct ssb_bus *bus;
57 u32 tmp;
58
59 if (!ccdev)
60 return;
61 bus = ccdev->bus;
62 /* chipcommon cores prior to rev6 don't support dynamic clock control */
63 if (ccdev->id.revision < 6)
64 return;
65 /* chipcommon cores rev10 are a whole new ball game */
66 if (ccdev->id.revision >= 10)
67 return;
68 if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
69 return;
70
71 switch (mode) {
72 case SSB_CLKMODE_SLOW:
73 tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
74 tmp |= SSB_CHIPCO_SLOWCLKCTL_FSLOW;
75 chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
76 break;
77 case SSB_CLKMODE_FAST:
78 ssb_pci_xtal(bus, SSB_GPIO_XTAL, 1); /* Force crystal on */
79 tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
80 tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
81 tmp |= SSB_CHIPCO_SLOWCLKCTL_IPLL;
82 chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
83 break;
84 case SSB_CLKMODE_DYNAMIC:
85 tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
86 tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
87 tmp &= ~SSB_CHIPCO_SLOWCLKCTL_IPLL;
88 tmp &= ~SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
89 if ((tmp & SSB_CHIPCO_SLOWCLKCTL_SRC) != SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL)
90 tmp |= SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
91 chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
92
93 /* for dynamic control, we have to release our xtal_pu "force on" */
94 if (tmp & SSB_CHIPCO_SLOWCLKCTL_ENXTAL)
95 ssb_pci_xtal(bus, SSB_GPIO_XTAL, 0);
96 break;
97 default:
98 SSB_WARN_ON(1);
99 }
100 }
101
102 /* Get the Slow Clock Source */
103 static enum ssb_clksrc chipco_pctl_get_slowclksrc(struct ssb_chipcommon *cc)
104 {
105 struct ssb_bus *bus = cc->dev->bus;
106 u32 uninitialized_var(tmp);
107
108 if (cc->dev->id.revision < 6) {
109 if (bus->bustype == SSB_BUSTYPE_SSB ||
110 bus->bustype == SSB_BUSTYPE_PCMCIA)
111 return SSB_CHIPCO_CLKSRC_XTALOS;
112 if (bus->bustype == SSB_BUSTYPE_PCI) {
113 pci_read_config_dword(bus->host_pci, SSB_GPIO_OUT, &tmp);
114 if (tmp & 0x10)
115 return SSB_CHIPCO_CLKSRC_PCI;
116 return SSB_CHIPCO_CLKSRC_XTALOS;
117 }
118 }
119 if (cc->dev->id.revision < 10) {
120 tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
121 tmp &= 0x7;
122 if (tmp == 0)
123 return SSB_CHIPCO_CLKSRC_LOPWROS;
124 if (tmp == 1)
125 return SSB_CHIPCO_CLKSRC_XTALOS;
126 if (tmp == 2)
127 return SSB_CHIPCO_CLKSRC_PCI;
128 }
129
130 return SSB_CHIPCO_CLKSRC_XTALOS;
131 }
132
133 /* Get maximum or minimum (depending on get_max flag) slowclock frequency. */
134 static int chipco_pctl_clockfreqlimit(struct ssb_chipcommon *cc, int get_max)
135 {
136 int uninitialized_var(limit);
137 enum ssb_clksrc clocksrc;
138 int divisor = 1;
139 u32 tmp;
140
141 clocksrc = chipco_pctl_get_slowclksrc(cc);
142 if (cc->dev->id.revision < 6) {
143 switch (clocksrc) {
144 case SSB_CHIPCO_CLKSRC_PCI:
145 divisor = 64;
146 break;
147 case SSB_CHIPCO_CLKSRC_XTALOS:
148 divisor = 32;
149 break;
150 default:
151 SSB_WARN_ON(1);
152 }
153 } else if (cc->dev->id.revision < 10) {
154 switch (clocksrc) {
155 case SSB_CHIPCO_CLKSRC_LOPWROS:
156 break;
157 case SSB_CHIPCO_CLKSRC_XTALOS:
158 case SSB_CHIPCO_CLKSRC_PCI:
159 tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
160 divisor = (tmp >> 16) + 1;
161 divisor *= 4;
162 break;
163 }
164 } else {
165 tmp = chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL);
166 divisor = (tmp >> 16) + 1;
167 divisor *= 4;
168 }
169
170 switch (clocksrc) {
171 case SSB_CHIPCO_CLKSRC_LOPWROS:
172 if (get_max)
173 limit = 43000;
174 else
175 limit = 25000;
176 break;
177 case SSB_CHIPCO_CLKSRC_XTALOS:
178 if (get_max)
179 limit = 20200000;
180 else
181 limit = 19800000;
182 break;
183 case SSB_CHIPCO_CLKSRC_PCI:
184 if (get_max)
185 limit = 34000000;
186 else
187 limit = 25000000;
188 break;
189 }
190 limit /= divisor;
191
192 return limit;
193 }
194
195 static void chipco_powercontrol_init(struct ssb_chipcommon *cc)
196 {
197 struct ssb_bus *bus = cc->dev->bus;
198
199 if (bus->chip_id == 0x4321) {
200 if (bus->chip_rev == 0)
201 chipco_write32(cc, SSB_CHIPCO_CHIPCTL, 0x3A4);
202 else if (bus->chip_rev == 1)
203 chipco_write32(cc, SSB_CHIPCO_CHIPCTL, 0xA4);
204 }
205
206 if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
207 return;
208
209 if (cc->dev->id.revision >= 10) {
210 /* Set Idle Power clock rate to 1Mhz */
211 chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL,
212 (chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) &
213 0x0000FFFF) | 0x00040000);
214 } else {
215 int maxfreq;
216
217 maxfreq = chipco_pctl_clockfreqlimit(cc, 1);
218 chipco_write32(cc, SSB_CHIPCO_PLLONDELAY,
219 (maxfreq * 150 + 999999) / 1000000);
220 chipco_write32(cc, SSB_CHIPCO_FREFSELDELAY,
221 (maxfreq * 15 + 999999) / 1000000);
222 }
223 }
224
225 static void calc_fast_powerup_delay(struct ssb_chipcommon *cc)
226 {
227 struct ssb_bus *bus = cc->dev->bus;
228 int minfreq;
229 unsigned int tmp;
230 u32 pll_on_delay;
231
232 if (bus->bustype != SSB_BUSTYPE_PCI)
233 return;
234 if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
235 return;
236
237 minfreq = chipco_pctl_clockfreqlimit(cc, 0);
238 pll_on_delay = chipco_read32(cc, SSB_CHIPCO_PLLONDELAY);
239 tmp = (((pll_on_delay + 2) * 1000000) + (minfreq - 1)) / minfreq;
240 SSB_WARN_ON(tmp & ~0xFFFF);
241
242 cc->fast_pwrup_delay = tmp;
243 }
244
245 void ssb_chipcommon_init(struct ssb_chipcommon *cc)
246 {
247 if (!cc->dev)
248 return; /* We don't have a ChipCommon */
249 chipco_powercontrol_init(cc);
250 ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
251 calc_fast_powerup_delay(cc);
252 }
253
254 void ssb_chipco_suspend(struct ssb_chipcommon *cc)
255 {
256 if (!cc->dev)
257 return;
258 ssb_chipco_set_clockmode(cc, SSB_CLKMODE_SLOW);
259 }
260
261 void ssb_chipco_resume(struct ssb_chipcommon *cc)
262 {
263 if (!cc->dev)
264 return;
265 chipco_powercontrol_init(cc);
266 ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
267 }
268
269 /* Get the processor clock */
270 void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc,
271 u32 *plltype, u32 *n, u32 *m)
272 {
273 *n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
274 *plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
275 switch (*plltype) {
276 case SSB_PLLTYPE_2:
277 case SSB_PLLTYPE_4:
278 case SSB_PLLTYPE_6:
279 case SSB_PLLTYPE_7:
280 *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_MIPS);
281 break;
282 case SSB_PLLTYPE_3:
283 /* 5350 uses m2 to control mips */
284 *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_M2);
285 break;
286 default:
287 *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_SB);
288 break;
289 }
290 }
291
292 /* Get the bus clock */
293 void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc,
294 u32 *plltype, u32 *n, u32 *m)
295 {
296 *n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
297 *plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
298 switch (*plltype) {
299 case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */
300 *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_MIPS);
301 break;
302 case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
303 if (cc->dev->bus->chip_id != 0x5365) {
304 *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_M2);
305 break;
306 }
307 /* Fallthough */
308 default:
309 *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_SB);
310 }
311 }
312
313 void ssb_chipco_timing_init(struct ssb_chipcommon *cc,
314 unsigned long ns)
315 {
316 struct ssb_device *dev = cc->dev;
317 struct ssb_bus *bus = dev->bus;
318 u32 tmp;
319
320 /* set register for external IO to control LED. */
321 chipco_write32(cc, SSB_CHIPCO_PROG_CFG, 0x11);
322 tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT; /* Waitcount-3 = 10ns */
323 tmp |= DIV_ROUND_UP(40, ns) << SSB_PROG_WCNT_1_SHIFT; /* Waitcount-1 = 40ns */
324 tmp |= DIV_ROUND_UP(240, ns); /* Waitcount-0 = 240ns */
325 chipco_write32(cc, SSB_CHIPCO_PROG_WAITCNT, tmp); /* 0x01020a0c for a 100Mhz clock */
326
327 /* Set timing for the flash */
328 tmp = DIV_ROUND_UP(10, ns) << SSB_FLASH_WCNT_3_SHIFT; /* Waitcount-3 = 10nS */
329 tmp |= DIV_ROUND_UP(10, ns) << SSB_FLASH_WCNT_1_SHIFT; /* Waitcount-1 = 10nS */
330 tmp |= DIV_ROUND_UP(120, ns); /* Waitcount-0 = 120nS */
331 if ((bus->chip_id == 0x5365) ||
332 (dev->id.revision < 9))
333 chipco_write32(cc, SSB_CHIPCO_FLASH_WAITCNT, tmp);
334 if ((bus->chip_id == 0x5365) ||
335 (dev->id.revision < 9) ||
336 ((bus->chip_id == 0x5350) && (bus->chip_rev == 0)))
337 chipco_write32(cc, SSB_CHIPCO_PCMCIA_MEMWAIT, tmp);
338
339 if (bus->chip_id == 0x5350) {
340 /* Enable EXTIF */
341 tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT; /* Waitcount-3 = 10ns */
342 tmp |= DIV_ROUND_UP(20, ns) << SSB_PROG_WCNT_2_SHIFT; /* Waitcount-2 = 20ns */
343 tmp |= DIV_ROUND_UP(100, ns) << SSB_PROG_WCNT_1_SHIFT; /* Waitcount-1 = 100ns */
344 tmp |= DIV_ROUND_UP(120, ns); /* Waitcount-0 = 120ns */
345 chipco_write32(cc, SSB_CHIPCO_PROG_WAITCNT, tmp); /* 0x01020a0c for a 100Mhz clock */
346 }
347 }
348
349 /* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */
350 void ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc, u32 ticks)
351 {
352 /* instant NMI */
353 chipco_write32(cc, SSB_CHIPCO_WATCHDOG, ticks);
354 }
355
356 void ssb_chipco_irq_mask(struct ssb_chipcommon *cc, u32 mask, u32 value)
357 {
358 chipco_write32_masked(cc, SSB_CHIPCO_IRQMASK, mask, value);
359 }
360
361 u32 ssb_chipco_irq_status(struct ssb_chipcommon *cc, u32 mask)
362 {
363 return chipco_read32(cc, SSB_CHIPCO_IRQSTAT) & mask;
364 }
365
366 u32 ssb_chipco_gpio_in(struct ssb_chipcommon *cc, u32 mask)
367 {
368 return chipco_read32(cc, SSB_CHIPCO_GPIOIN) & mask;
369 }
370
371 u32 ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value)
372 {
373 return chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUT, mask, value);
374 }
375
376 u32 ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value)
377 {
378 return chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUTEN, mask, value);
379 }
380
381 u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, u32 mask, u32 value)
382 {
383 return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value);
384 }
385
386 u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value)
387 {
388 return chipco_write32_masked(cc, SSB_CHIPCO_GPIOIRQ, mask, value);
389 }
390
391 u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, u32 mask, u32 value)
392 {
393 return chipco_write32_masked(cc, SSB_CHIPCO_GPIOPOL, mask, value);
394 }
395
396 #ifdef CONFIG_SSB_SERIAL
397 int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
398 struct ssb_serial_port *ports)
399 {
400 struct ssb_bus *bus = cc->dev->bus;
401 int nr_ports = 0;
402 u32 plltype;
403 unsigned int irq;
404 u32 baud_base, div;
405 u32 i, n;
406 unsigned int ccrev = cc->dev->id.revision;
407
408 plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
409 irq = ssb_mips_irq(cc->dev);
410
411 if (plltype == SSB_PLLTYPE_1) {
412 /* PLL clock */
413 baud_base = ssb_calc_clock_rate(plltype,
414 chipco_read32(cc, SSB_CHIPCO_CLOCK_N),
415 chipco_read32(cc, SSB_CHIPCO_CLOCK_M2));
416 div = 1;
417 } else {
418 if (ccrev == 20) {
419 /* BCM5354 uses constant 25MHz clock */
420 baud_base = 25000000;
421 div = 48;
422 /* Set the override bit so we don't divide it */
423 chipco_write32(cc, SSB_CHIPCO_CORECTL,
424 chipco_read32(cc, SSB_CHIPCO_CORECTL)
425 | SSB_CHIPCO_CORECTL_UARTCLK0);
426 } else if ((ccrev >= 11) && (ccrev != 15)) {
427 /* Fixed ALP clock */
428 baud_base = 20000000;
429 if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
430 /* FIXME: baud_base is different for devices with a PMU */
431 SSB_WARN_ON(1);
432 }
433 div = 1;
434 if (ccrev >= 21) {
435 /* Turn off UART clock before switching clocksource. */
436 chipco_write32(cc, SSB_CHIPCO_CORECTL,
437 chipco_read32(cc, SSB_CHIPCO_CORECTL)
438 & ~SSB_CHIPCO_CORECTL_UARTCLKEN);
439 }
440 /* Set the override bit so we don't divide it */
441 chipco_write32(cc, SSB_CHIPCO_CORECTL,
442 chipco_read32(cc, SSB_CHIPCO_CORECTL)
443 | SSB_CHIPCO_CORECTL_UARTCLK0);
444 if (ccrev >= 21) {
445 /* Re-enable the UART clock. */
446 chipco_write32(cc, SSB_CHIPCO_CORECTL,
447 chipco_read32(cc, SSB_CHIPCO_CORECTL)
448 | SSB_CHIPCO_CORECTL_UARTCLKEN);
449 }
450 } else if (ccrev >= 3) {
451 /* Internal backplane clock */
452 baud_base = ssb_clockspeed(bus);
453 div = chipco_read32(cc, SSB_CHIPCO_CLKDIV)
454 & SSB_CHIPCO_CLKDIV_UART;
455 } else {
456 /* Fixed internal backplane clock */
457 baud_base = 88000000;
458 div = 48;
459 }
460
461 /* Clock source depends on strapping if UartClkOverride is unset */
462 if ((ccrev > 0) &&
463 !(chipco_read32(cc, SSB_CHIPCO_CORECTL) & SSB_CHIPCO_CORECTL_UARTCLK0)) {
464 if ((cc->capabilities & SSB_CHIPCO_CAP_UARTCLK) ==
465 SSB_CHIPCO_CAP_UARTCLK_INT) {
466 /* Internal divided backplane clock */
467 baud_base /= div;
468 } else {
469 /* Assume external clock of 1.8432 MHz */
470 baud_base = 1843200;
471 }
472 }
473 }
474
475 /* Determine the registers of the UARTs */
476 n = (cc->capabilities & SSB_CHIPCO_CAP_NRUART);
477 for (i = 0; i < n; i++) {
478 void __iomem *cc_mmio;
479 void __iomem *uart_regs;
480
481 cc_mmio = cc->dev->bus->mmio + (cc->dev->core_index * SSB_CORE_SIZE);
482 uart_regs = cc_mmio + SSB_CHIPCO_UART0_DATA;
483 /* Offset changed at after rev 0 */
484 if (ccrev == 0)
485 uart_regs += (i * 8);
486 else
487 uart_regs += (i * 256);
488
489 nr_ports++;
490 ports[i].regs = uart_regs;
491 ports[i].irq = irq;
492 ports[i].baud_base = baud_base;
493 ports[i].reg_shift = 0;
494 }
495
496 return nr_ports;
497 }
498 #endif /* CONFIG_SSB_SERIAL */
Support for the Chinese Samsung S3C2440 based development boards