2 * Copyright(c) 2007 Intel Corporation. All rights reserved.
3 * Copyright(c) 2008 Red Hat, Inc. All rights reserved.
4 * Copyright(c) 2008 Mike Christie
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms and conditions of the GNU General Public License,
8 * version 2, as published by the Free Software Foundation.
10 * This program is distributed in the hope it will be useful, but WITHOUT
11 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
15 * You should have received a copy of the GNU General Public License along with
16 * this program; if not, write to the Free Software Foundation, Inc.,
17 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
19 * Maintained at www.Open-FCoE.org
22 #include <linux/module.h>
23 #include <linux/delay.h>
24 #include <linux/kernel.h>
25 #include <linux/types.h>
26 #include <linux/spinlock.h>
27 #include <linux/scatterlist.h>
28 #include <linux/err.h>
29 #include <linux/crc32.h>
31 #include <scsi/scsi_tcq.h>
32 #include <scsi/scsi.h>
33 #include <scsi/scsi_host.h>
34 #include <scsi/scsi_device.h>
35 #include <scsi/scsi_cmnd.h>
37 #include <scsi/fc/fc_fc2.h>
39 #include <scsi/libfc.h>
40 #include <scsi/fc_encode.h>
42 MODULE_AUTHOR("Open-FCoE.org");
43 MODULE_DESCRIPTION("libfc");
44 MODULE_LICENSE("GPL");
46 static int fc_fcp_debug
;
48 #define FC_DEBUG_FCP(fmt...) \
54 static struct kmem_cache
*scsi_pkt_cachep
;
56 /* SRB state definitions */
57 #define FC_SRB_FREE 0 /* cmd is free */
58 #define FC_SRB_CMD_SENT (1 << 0) /* cmd has been sent */
59 #define FC_SRB_RCV_STATUS (1 << 1) /* response has arrived */
60 #define FC_SRB_ABORT_PENDING (1 << 2) /* cmd abort sent to device */
61 #define FC_SRB_ABORTED (1 << 3) /* abort acknowleged */
62 #define FC_SRB_DISCONTIG (1 << 4) /* non-sequential data recvd */
63 #define FC_SRB_COMPL (1 << 5) /* fc_io_compl has been run */
64 #define FC_SRB_FCP_PROCESSING_TMO (1 << 6) /* timer function processing */
65 #define FC_SRB_NOMEM (1 << 7) /* dropped to out of mem */
67 #define FC_SRB_READ (1 << 1)
68 #define FC_SRB_WRITE (1 << 0)
71 * The SCp.ptr should be tested and set under the host lock. NULL indicates
72 * that the command has been retruned to the scsi layer.
74 #define CMD_SP(Cmnd) ((struct fc_fcp_pkt *)(Cmnd)->SCp.ptr)
75 #define CMD_ENTRY_STATUS(Cmnd) ((Cmnd)->SCp.have_data_in)
76 #define CMD_COMPL_STATUS(Cmnd) ((Cmnd)->SCp.this_residual)
77 #define CMD_SCSI_STATUS(Cmnd) ((Cmnd)->SCp.Status)
78 #define CMD_RESID_LEN(Cmnd) ((Cmnd)->SCp.buffers_residual)
80 struct fc_fcp_internal
{
81 mempool_t
*scsi_pkt_pool
;
82 struct list_head scsi_pkt_queue
;
86 #define fc_get_scsi_internal(x) ((struct fc_fcp_internal *)(x)->scsi_priv)
90 * FC scsi I/O related functions
92 static void fc_fcp_recv_data(struct fc_fcp_pkt
*, struct fc_frame
*);
93 static void fc_fcp_recv(struct fc_seq
*, struct fc_frame
*, void *);
94 static void fc_fcp_resp(struct fc_fcp_pkt
*, struct fc_frame
*);
95 static void fc_fcp_complete_locked(struct fc_fcp_pkt
*);
96 static void fc_tm_done(struct fc_seq
*, struct fc_frame
*, void *);
97 static void fc_fcp_error(struct fc_fcp_pkt
*fsp
, struct fc_frame
*fp
);
98 static void fc_timeout_error(struct fc_fcp_pkt
*);
99 static void fc_fcp_timeout(unsigned long data
);
100 static void fc_fcp_rec(struct fc_fcp_pkt
*);
101 static void fc_fcp_rec_error(struct fc_fcp_pkt
*, struct fc_frame
*);
102 static void fc_fcp_rec_resp(struct fc_seq
*, struct fc_frame
*, void *);
103 static void fc_io_compl(struct fc_fcp_pkt
*);
105 static void fc_fcp_srr(struct fc_fcp_pkt
*, enum fc_rctl
, u32
);
106 static void fc_fcp_srr_resp(struct fc_seq
*, struct fc_frame
*, void *);
107 static void fc_fcp_srr_error(struct fc_fcp_pkt
*, struct fc_frame
*);
110 * command status codes
112 #define FC_COMPLETE 0
113 #define FC_CMD_ABORTED 1
114 #define FC_CMD_RESET 2
115 #define FC_CMD_PLOGO 3
117 #define FC_TRANS_ERR 5
118 #define FC_DATA_OVRRUN 6
119 #define FC_DATA_UNDRUN 7
121 #define FC_HRD_ERROR 9
122 #define FC_CMD_TIME_OUT 10
125 * Error recovery timeout values.
127 #define FC_SCSI_ER_TIMEOUT (10 * HZ)
128 #define FC_SCSI_TM_TOV (10 * HZ)
129 #define FC_SCSI_REC_TOV (2 * HZ)
130 #define FC_HOST_RESET_TIMEOUT (30 * HZ)
132 #define FC_MAX_ERROR_CNT 5
133 #define FC_MAX_RECOV_RETRY 3
135 #define FC_FCP_DFLT_QUEUE_DEPTH 32
138 * fc_fcp_pkt_alloc - allocation routine for scsi_pkt packet
139 * @lp: fc lport struct
140 * @gfp: gfp flags for allocation
142 * This is used by upper layer scsi driver.
143 * Return Value : scsi_pkt structure or null on allocation failure.
144 * Context : call from process context. no locking required.
146 static struct fc_fcp_pkt
*fc_fcp_pkt_alloc(struct fc_lport
*lp
, gfp_t gfp
)
148 struct fc_fcp_internal
*si
= fc_get_scsi_internal(lp
);
149 struct fc_fcp_pkt
*fsp
;
151 fsp
= mempool_alloc(si
->scsi_pkt_pool
, gfp
);
153 memset(fsp
, 0, sizeof(*fsp
));
155 atomic_set(&fsp
->ref_cnt
, 1);
156 init_timer(&fsp
->timer
);
157 INIT_LIST_HEAD(&fsp
->list
);
158 spin_lock_init(&fsp
->scsi_pkt_lock
);
164 * fc_fcp_pkt_release - release hold on scsi_pkt packet
165 * @fsp: fcp packet struct
167 * This is used by upper layer scsi driver.
168 * Context : call from process and interrupt context.
169 * no locking required
171 static void fc_fcp_pkt_release(struct fc_fcp_pkt
*fsp
)
173 if (atomic_dec_and_test(&fsp
->ref_cnt
)) {
174 struct fc_fcp_internal
*si
= fc_get_scsi_internal(fsp
->lp
);
176 mempool_free(fsp
, si
->scsi_pkt_pool
);
180 static void fc_fcp_pkt_hold(struct fc_fcp_pkt
*fsp
)
182 atomic_inc(&fsp
->ref_cnt
);
186 * fc_fcp_pkt_destory - release hold on scsi_pkt packet
188 * @seq: exchange sequence
189 * @fsp: fcp packet struct
191 * Release hold on scsi_pkt packet set to keep scsi_pkt
192 * till EM layer exch resource is not freed.
193 * Context : called from from EM layer.
194 * no locking required
196 static void fc_fcp_pkt_destroy(struct fc_seq
*seq
, void *fsp
)
198 fc_fcp_pkt_release(fsp
);
202 * fc_fcp_lock_pkt - lock a packet and get a ref to it.
205 * We should only return error if we return a command to scsi-ml before
206 * getting a response. This can happen in cases where we send a abort, but
207 * do not wait for the response and the abort and command can be passing
208 * each other on the wire/network-layer.
210 * Note: this function locks the packet and gets a reference to allow
211 * callers to call the completion function while the lock is held and
212 * not have to worry about the packets refcount.
214 * TODO: Maybe we should just have callers grab/release the lock and
215 * have a function that they call to verify the fsp and grab a ref if
218 static inline int fc_fcp_lock_pkt(struct fc_fcp_pkt
*fsp
)
220 spin_lock_bh(&fsp
->scsi_pkt_lock
);
221 if (fsp
->state
& FC_SRB_COMPL
) {
222 spin_unlock_bh(&fsp
->scsi_pkt_lock
);
226 fc_fcp_pkt_hold(fsp
);
230 static inline void fc_fcp_unlock_pkt(struct fc_fcp_pkt
*fsp
)
232 spin_unlock_bh(&fsp
->scsi_pkt_lock
);
233 fc_fcp_pkt_release(fsp
);
236 static void fc_fcp_timer_set(struct fc_fcp_pkt
*fsp
, unsigned long delay
)
238 if (!(fsp
->state
& FC_SRB_COMPL
))
239 mod_timer(&fsp
->timer
, jiffies
+ delay
);
242 static int fc_fcp_send_abort(struct fc_fcp_pkt
*fsp
)
247 fsp
->state
|= FC_SRB_ABORT_PENDING
;
248 return fsp
->lp
->tt
.seq_exch_abort(fsp
->seq_ptr
, 0);
253 * An abort isn't needed.
255 static void fc_fcp_retry_cmd(struct fc_fcp_pkt
*fsp
)
258 fsp
->lp
->tt
.exch_done(fsp
->seq_ptr
);
262 fsp
->state
&= ~FC_SRB_ABORT_PENDING
;
263 fsp
->io_status
= SUGGEST_RETRY
<< 24;
264 fsp
->status_code
= FC_ERROR
;
265 fc_fcp_complete_locked(fsp
);
269 * Receive SCSI data from target.
270 * Called after receiving solicited data.
272 static void fc_fcp_recv_data(struct fc_fcp_pkt
*fsp
, struct fc_frame
*fp
)
274 struct scsi_cmnd
*sc
= fsp
->cmd
;
275 struct fc_lport
*lp
= fsp
->lp
;
276 struct fcoe_dev_stats
*stats
;
277 struct fc_frame_header
*fh
;
284 struct scatterlist
*sg
;
287 fh
= fc_frame_header_get(fp
);
288 offset
= ntohl(fh
->fh_parm_offset
);
289 start_offset
= offset
;
290 len
= fr_len(fp
) - sizeof(*fh
);
291 buf
= fc_frame_payload_get(fp
, 0);
293 if (offset
+ len
> fsp
->data_len
) {
295 * this should never happen
297 if ((fr_flags(fp
) & FCPHF_CRC_UNCHECKED
) &&
298 fc_frame_crc_check(fp
))
300 FC_DEBUG_FCP("data received past end. len %zx offset %zx "
301 "data_len %x\n", len
, offset
, fsp
->data_len
);
302 fc_fcp_retry_cmd(fsp
);
305 if (offset
!= fsp
->xfer_len
)
306 fsp
->state
|= FC_SRB_DISCONTIG
;
309 if (fr_flags(fp
) & FCPHF_CRC_UNCHECKED
)
310 crc
= crc32(~0, (u8
*) fh
, sizeof(*fh
));
312 sg
= scsi_sglist(sc
);
315 while (remaining
> 0 && sg
) {
320 if (offset
>= sg
->length
) {
321 offset
-= sg
->length
;
325 sg_bytes
= min(remaining
, sg
->length
- offset
);
328 * The scatterlist item may be bigger than PAGE_SIZE,
329 * but we are limited to mapping PAGE_SIZE at a time.
331 off
= offset
+ sg
->offset
;
332 sg_bytes
= min(sg_bytes
, (size_t)
333 (PAGE_SIZE
- (off
& ~PAGE_MASK
)));
334 page_addr
= kmap_atomic(sg_page(sg
) + (off
>> PAGE_SHIFT
),
337 break; /* XXX panic? */
339 if (fr_flags(fp
) & FCPHF_CRC_UNCHECKED
)
340 crc
= crc32(crc
, buf
, sg_bytes
);
341 memcpy((char *)page_addr
+ (off
& ~PAGE_MASK
), buf
,
344 kunmap_atomic(page_addr
, KM_SOFTIRQ0
);
347 remaining
-= sg_bytes
;
348 copy_len
+= sg_bytes
;
351 if (fr_flags(fp
) & FCPHF_CRC_UNCHECKED
) {
352 buf
= fc_frame_payload_get(fp
, 0);
354 crc
= crc32(crc
, buf
+ len
, 4 - (len
% 4));
355 len
+= 4 - (len
% 4);
358 if (~crc
!= le32_to_cpu(fr_crc(fp
))) {
360 stats
= lp
->dev_stats
[smp_processor_id()];
361 stats
->ErrorFrames
++;
362 if (stats
->InvalidCRCCount
++ < 5)
363 FC_DBG("CRC error on data frame\n");
365 * Assume the frame is total garbage.
366 * We may have copied it over the good part
368 * If so, we need to retry the entire operation.
369 * Otherwise, ignore it.
371 if (fsp
->state
& FC_SRB_DISCONTIG
)
372 fc_fcp_retry_cmd(fsp
);
377 if (fsp
->xfer_contig_end
== start_offset
)
378 fsp
->xfer_contig_end
+= copy_len
;
379 fsp
->xfer_len
+= copy_len
;
382 * In the very rare event that this data arrived after the response
383 * and completes the transfer, call the completion handler.
385 if (unlikely(fsp
->state
& FC_SRB_RCV_STATUS
) &&
386 fsp
->xfer_len
== fsp
->data_len
- fsp
->scsi_resid
)
387 fc_fcp_complete_locked(fsp
);
391 * fc_fcp_send_data - Send SCSI data to target.
392 * @fsp: ptr to fc_fcp_pkt
393 * @sp: ptr to this sequence
394 * @offset: starting offset for this data request
395 * @seq_blen: the burst length for this data request
397 * Called after receiving a Transfer Ready data descriptor.
398 * if LLD is capable of seq offload then send down seq_blen
399 * size of data in single frame, otherwise send multiple FC
400 * frames of max FC frame payload supported by target port.
402 * Returns : 0 for success.
404 static int fc_fcp_send_data(struct fc_fcp_pkt
*fsp
, struct fc_seq
*seq
,
405 size_t offset
, size_t seq_blen
)
408 struct scsi_cmnd
*sc
;
409 struct scatterlist
*sg
;
410 struct fc_frame
*fp
= NULL
;
411 struct fc_lport
*lp
= fsp
->lp
;
416 size_t frame_offset
, fh_parm_offset
;
420 int using_sg
= lp
->sg_supp
;
423 WARN_ON(seq_blen
<= 0);
424 if (unlikely(offset
+ seq_blen
> fsp
->data_len
)) {
425 /* this should never happen */
426 FC_DEBUG_FCP("xfer-ready past end. seq_blen %zx offset %zx\n",
428 fc_fcp_send_abort(fsp
);
430 } else if (offset
!= fsp
->xfer_len
) {
431 /* Out of Order Data Request - no problem, but unexpected. */
432 FC_DEBUG_FCP("xfer-ready non-contiguous. "
433 "seq_blen %zx offset %zx\n", seq_blen
, offset
);
437 * if LLD is capable of seq_offload then set transport
438 * burst length (t_blen) to seq_blen, otherwise set t_blen
439 * to max FC frame payload previously set in fsp->max_payload.
441 t_blen
= lp
->seq_offload
? seq_blen
: fsp
->max_payload
;
442 WARN_ON(t_blen
< FC_MIN_MAX_PAYLOAD
);
444 t_blen
&= ~(512 - 1); /* round down to block size */
445 WARN_ON(t_blen
< FC_MIN_MAX_PAYLOAD
); /* won't go below 256 */
448 remaining
= seq_blen
;
449 fh_parm_offset
= frame_offset
= offset
;
451 seq
= lp
->tt
.seq_start_next(seq
);
452 f_ctl
= FC_FC_REL_OFF
;
456 * If a get_page()/put_page() will fail, don't use sg lists
457 * in the fc_frame structure.
459 * The put_page() may be long after the I/O has completed
460 * in the case of FCoE, since the network driver does it
461 * via free_skb(). See the test in free_pages_check().
463 * Test this case with 'dd </dev/zero >/dev/st0 bs=64k'.
466 for (sg
= scsi_sglist(sc
); sg
; sg
= sg_next(sg
)) {
467 if (page_count(sg_page(sg
)) == 0 ||
468 (sg_page(sg
)->flags
& (1 << PG_lru
|
482 sg
= scsi_sglist(sc
);
484 while (remaining
> 0 && sg
) {
485 if (offset
>= sg
->length
) {
486 offset
-= sg
->length
;
491 tlen
= min(t_blen
, remaining
);
494 * TODO. Temporary workaround. fc_seq_send() can't
495 * handle odd lengths in non-linear skbs.
496 * This will be the final fragment only.
501 fp
= _fc_frame_alloc(lp
, 0);
505 fp
= fc_frame_alloc(lp
, tlen
);
509 data
= (void *)(fr_hdr(fp
)) +
510 sizeof(struct fc_frame_header
);
512 fh_parm_offset
= frame_offset
;
513 fr_max_payload(fp
) = fsp
->max_payload
;
515 sg_bytes
= min(tlen
, sg
->length
- offset
);
517 WARN_ON(skb_shinfo(fp_skb(fp
))->nr_frags
>
519 get_page(sg_page(sg
));
520 skb_fill_page_desc(fp_skb(fp
),
521 skb_shinfo(fp_skb(fp
))->nr_frags
,
522 sg_page(sg
), sg
->offset
+ offset
,
524 fp_skb(fp
)->data_len
+= sg_bytes
;
525 fr_len(fp
) += sg_bytes
;
526 fp_skb(fp
)->truesize
+= PAGE_SIZE
;
528 size_t off
= offset
+ sg
->offset
;
531 * The scatterlist item may be bigger than PAGE_SIZE,
532 * but we must not cross pages inside the kmap.
534 sg_bytes
= min(sg_bytes
, (size_t) (PAGE_SIZE
-
535 (off
& ~PAGE_MASK
)));
536 page_addr
= kmap_atomic(sg_page(sg
) +
539 memcpy(data
, (char *)page_addr
+ (off
& ~PAGE_MASK
),
541 kunmap_atomic(page_addr
, KM_SOFTIRQ0
);
545 frame_offset
+= sg_bytes
;
547 remaining
-= sg_bytes
;
553 * Send sequence with transfer sequence initiative in case
554 * this is last FCP frame of the sequence.
557 f_ctl
|= FC_FC_SEQ_INIT
| FC_FC_END_SEQ
;
559 ep
= fc_seq_exch(seq
);
560 fc_fill_fc_hdr(fp
, FC_RCTL_DD_SOL_DATA
, ep
->did
, ep
->sid
,
561 FC_TYPE_FCP
, f_ctl
, fh_parm_offset
);
564 * send fragment using for a sequence.
566 error
= lp
->tt
.seq_send(lp
, seq
, fp
);
568 WARN_ON(1); /* send error should be rare */
569 fc_fcp_retry_cmd(fsp
);
574 fsp
->xfer_len
+= seq_blen
; /* premature count? */
578 static void fc_fcp_abts_resp(struct fc_fcp_pkt
*fsp
, struct fc_frame
*fp
)
581 struct fc_ba_rjt
*brp
;
582 struct fc_frame_header
*fh
;
584 fh
= fc_frame_header_get(fp
);
585 switch (fh
->fh_r_ctl
) {
589 brp
= fc_frame_payload_get(fp
, sizeof(*brp
));
590 if (brp
&& brp
->br_reason
== FC_BA_RJT_LOG_ERR
)
595 * we will let the command timeout
596 * and scsi-ml recover in this case,
597 * therefore cleared the ba_done flag.
603 fsp
->state
|= FC_SRB_ABORTED
;
604 fsp
->state
&= ~FC_SRB_ABORT_PENDING
;
606 if (fsp
->wait_for_comp
)
607 complete(&fsp
->tm_done
);
609 fc_fcp_complete_locked(fsp
);
614 * fc_fcp_reduce_can_queue - drop can_queue
615 * @lp: lport to drop queueing for
617 * If we are getting memory allocation failures, then we may
618 * be trying to execute too many commands. We let the running
619 * commands complete or timeout, then try again with a reduced
620 * can_queue. Eventually we will hit the point where we run
621 * on all reserved structs.
623 static void fc_fcp_reduce_can_queue(struct fc_lport
*lp
)
625 struct fc_fcp_internal
*si
= fc_get_scsi_internal(lp
);
629 spin_lock_irqsave(lp
->host
->host_lock
, flags
);
634 can_queue
= lp
->host
->can_queue
;
638 lp
->host
->can_queue
= can_queue
;
639 shost_printk(KERN_ERR
, lp
->host
, "Could not allocate frame.\n"
640 "Reducing can_queue to %d.\n", can_queue
);
642 spin_unlock_irqrestore(lp
->host
->host_lock
, flags
);
646 * exch mgr calls this routine to process scsi
650 * Context : called from Soft IRQ context
651 * can not called holding list lock
653 static void fc_fcp_recv(struct fc_seq
*seq
, struct fc_frame
*fp
, void *arg
)
655 struct fc_fcp_pkt
*fsp
= (struct fc_fcp_pkt
*)arg
;
657 struct fc_frame_header
*fh
;
658 struct fcp_txrdy
*dd
;
665 fh
= fc_frame_header_get(fp
);
666 r_ctl
= fh
->fh_r_ctl
;
669 if (!(lp
->state
& LPORT_ST_READY
))
671 if (fc_fcp_lock_pkt(fsp
))
673 fsp
->last_pkt_time
= jiffies
;
675 if (fh
->fh_type
== FC_TYPE_BLS
) {
676 fc_fcp_abts_resp(fsp
, fp
);
680 if (fsp
->state
& (FC_SRB_ABORTED
| FC_SRB_ABORT_PENDING
))
683 if (r_ctl
== FC_RCTL_DD_DATA_DESC
) {
685 * received XFER RDY from the target
686 * need to send data to the target
688 WARN_ON(fr_flags(fp
) & FCPHF_CRC_UNCHECKED
);
689 dd
= fc_frame_payload_get(fp
, sizeof(*dd
));
692 rc
= fc_fcp_send_data(fsp
, seq
,
693 (size_t) ntohl(dd
->ft_data_ro
),
694 (size_t) ntohl(dd
->ft_burst_len
));
696 seq
->rec_data
= fsp
->xfer_len
;
697 else if (rc
== -ENOMEM
)
698 fsp
->state
|= FC_SRB_NOMEM
;
699 } else if (r_ctl
== FC_RCTL_DD_SOL_DATA
) {
701 * received a DATA frame
702 * next we will copy the data to the system buffer
704 WARN_ON(fr_len(fp
) < sizeof(*fh
)); /* len may be 0 */
705 fc_fcp_recv_data(fsp
, fp
);
706 seq
->rec_data
= fsp
->xfer_contig_end
;
707 } else if (r_ctl
== FC_RCTL_DD_CMD_STATUS
) {
708 WARN_ON(fr_flags(fp
) & FCPHF_CRC_UNCHECKED
);
710 fc_fcp_resp(fsp
, fp
);
712 FC_DBG("unexpected frame. r_ctl %x\n", r_ctl
);
715 fc_fcp_unlock_pkt(fsp
);
720 fc_fcp_error(fsp
, fp
);
721 else if (rc
== -ENOMEM
)
722 fc_fcp_reduce_can_queue(lp
);
725 static void fc_fcp_resp(struct fc_fcp_pkt
*fsp
, struct fc_frame
*fp
)
727 struct fc_frame_header
*fh
;
728 struct fcp_resp
*fc_rp
;
729 struct fcp_resp_ext
*rp_ex
;
730 struct fcp_resp_rsp_info
*fc_rp_info
;
738 fh
= (struct fc_frame_header
*)fr_hdr(fp
);
739 if (unlikely(plen
< sizeof(*fh
) + sizeof(*fc_rp
)))
742 fc_rp
= (struct fcp_resp
*)(fh
+ 1);
743 fsp
->cdb_status
= fc_rp
->fr_status
;
744 flags
= fc_rp
->fr_flags
;
745 fsp
->scsi_comp_flags
= flags
;
746 expected_len
= fsp
->data_len
;
748 if (unlikely((flags
& ~FCP_CONF_REQ
) || fc_rp
->fr_status
)) {
749 rp_ex
= (void *)(fc_rp
+ 1);
750 if (flags
& (FCP_RSP_LEN_VAL
| FCP_SNS_LEN_VAL
)) {
751 if (plen
< sizeof(*fc_rp
) + sizeof(*rp_ex
))
753 fc_rp_info
= (struct fcp_resp_rsp_info
*)(rp_ex
+ 1);
754 if (flags
& FCP_RSP_LEN_VAL
) {
755 respl
= ntohl(rp_ex
->fr_rsp_len
);
756 if (respl
!= sizeof(*fc_rp_info
))
758 if (fsp
->wait_for_comp
) {
759 /* Abuse cdb_status for rsp code */
760 fsp
->cdb_status
= fc_rp_info
->rsp_code
;
761 complete(&fsp
->tm_done
);
763 * tmfs will not have any scsi cmd so
770 if (flags
& FCP_SNS_LEN_VAL
) {
771 snsl
= ntohl(rp_ex
->fr_sns_len
);
772 if (snsl
> SCSI_SENSE_BUFFERSIZE
)
773 snsl
= SCSI_SENSE_BUFFERSIZE
;
774 memcpy(fsp
->cmd
->sense_buffer
,
775 (char *)fc_rp_info
+ respl
, snsl
);
778 if (flags
& (FCP_RESID_UNDER
| FCP_RESID_OVER
)) {
779 if (plen
< sizeof(*fc_rp
) + sizeof(rp_ex
->fr_resid
))
781 if (flags
& FCP_RESID_UNDER
) {
782 fsp
->scsi_resid
= ntohl(rp_ex
->fr_resid
);
784 * The cmnd->underflow is the minimum number of
785 * bytes that must be transfered for this
786 * command. Provided a sense condition is not
787 * present, make sure the actual amount
788 * transferred is at least the underflow value
791 if (!(flags
& FCP_SNS_LEN_VAL
) &&
792 (fc_rp
->fr_status
== 0) &&
793 (scsi_bufflen(fsp
->cmd
) -
794 fsp
->scsi_resid
) < fsp
->cmd
->underflow
)
796 expected_len
-= fsp
->scsi_resid
;
798 fsp
->status_code
= FC_ERROR
;
802 fsp
->state
|= FC_SRB_RCV_STATUS
;
805 * Check for missing or extra data frames.
807 if (unlikely(fsp
->xfer_len
!= expected_len
)) {
808 if (fsp
->xfer_len
< expected_len
) {
810 * Some data may be queued locally,
811 * Wait a at least one jiffy to see if it is delivered.
812 * If this expires without data, we may do SRR.
814 fc_fcp_timer_set(fsp
, 2);
817 fsp
->status_code
= FC_DATA_OVRRUN
;
818 FC_DBG("tgt %6x xfer len %zx greater than expected len %x. "
821 fsp
->xfer_len
, expected_len
, fsp
->data_len
);
823 fc_fcp_complete_locked(fsp
);
827 FC_DBG("short FCP response. flags 0x%x len %u respl %u snsl %u\n",
828 flags
, fr_len(fp
), respl
, snsl
);
830 fsp
->status_code
= FC_ERROR
;
831 fc_fcp_complete_locked(fsp
);
835 * fc_fcp_complete_locked - complete processing of a fcp packet
838 * This function may sleep if a timer is pending. The packet lock must be
839 * held, and the host lock must not be held.
841 static void fc_fcp_complete_locked(struct fc_fcp_pkt
*fsp
)
843 struct fc_lport
*lp
= fsp
->lp
;
848 if (fsp
->state
& FC_SRB_ABORT_PENDING
)
851 if (fsp
->state
& FC_SRB_ABORTED
) {
852 if (!fsp
->status_code
)
853 fsp
->status_code
= FC_CMD_ABORTED
;
856 * Test for transport underrun, independent of response
859 if (fsp
->xfer_len
< fsp
->data_len
&& !fsp
->io_status
&&
860 (!(fsp
->scsi_comp_flags
& FCP_RESID_UNDER
) ||
861 fsp
->xfer_len
< fsp
->data_len
- fsp
->scsi_resid
)) {
862 fsp
->status_code
= FC_DATA_UNDRUN
;
863 fsp
->io_status
= SUGGEST_RETRY
<< 24;
870 if (unlikely(fsp
->scsi_comp_flags
& FCP_CONF_REQ
)) {
871 struct fc_frame
*conf_frame
;
874 csp
= lp
->tt
.seq_start_next(seq
);
875 conf_frame
= fc_frame_alloc(fsp
->lp
, 0);
877 f_ctl
= FC_FC_SEQ_INIT
;
878 f_ctl
|= FC_FC_LAST_SEQ
| FC_FC_END_SEQ
;
879 ep
= fc_seq_exch(seq
);
880 fc_fill_fc_hdr(conf_frame
, FC_RCTL_DD_SOL_CTL
,
882 FC_TYPE_FCP
, f_ctl
, 0);
883 lp
->tt
.seq_send(lp
, csp
, conf_frame
);
886 lp
->tt
.exch_done(seq
);
891 static void fc_fcp_cleanup_cmd(struct fc_fcp_pkt
*fsp
, int error
)
893 struct fc_lport
*lp
= fsp
->lp
;
896 lp
->tt
.exch_done(fsp
->seq_ptr
);
899 fsp
->status_code
= error
;
903 * fc_fcp_cleanup_each_cmd - run fn on each active command
907 * @error: fsp status code
909 * If lun or id is -1, they are ignored.
911 static void fc_fcp_cleanup_each_cmd(struct fc_lport
*lp
, unsigned int id
,
912 unsigned int lun
, int error
)
914 struct fc_fcp_internal
*si
= fc_get_scsi_internal(lp
);
915 struct fc_fcp_pkt
*fsp
;
916 struct scsi_cmnd
*sc_cmd
;
919 spin_lock_irqsave(lp
->host
->host_lock
, flags
);
921 list_for_each_entry(fsp
, &si
->scsi_pkt_queue
, list
) {
923 if (id
!= -1 && scmd_id(sc_cmd
) != id
)
926 if (lun
!= -1 && sc_cmd
->device
->lun
!= lun
)
929 fc_fcp_pkt_hold(fsp
);
930 spin_unlock_irqrestore(lp
->host
->host_lock
, flags
);
932 if (!fc_fcp_lock_pkt(fsp
)) {
933 fc_fcp_cleanup_cmd(fsp
, error
);
935 fc_fcp_unlock_pkt(fsp
);
938 fc_fcp_pkt_release(fsp
);
939 spin_lock_irqsave(lp
->host
->host_lock
, flags
);
941 * while we dropped the lock multiple pkts could
942 * have been released, so we have to start over.
946 spin_unlock_irqrestore(lp
->host
->host_lock
, flags
);
949 static void fc_fcp_abort_io(struct fc_lport
*lp
)
951 fc_fcp_cleanup_each_cmd(lp
, -1, -1, FC_HRD_ERROR
);
955 * fc_fcp_pkt_send - send a fcp packet to the lower level.
959 * This is called by upper layer protocol.
960 * Return : zero for success and -1 for failure
961 * Context : called from queuecommand which can be called from process
963 * Locks : called with the host lock and irqs disabled.
965 static int fc_fcp_pkt_send(struct fc_lport
*lp
, struct fc_fcp_pkt
*fsp
)
967 struct fc_fcp_internal
*si
= fc_get_scsi_internal(lp
);
970 fsp
->cmd
->SCp
.ptr
= (char *)fsp
;
971 fsp
->cdb_cmd
.fc_dl
= htonl(fsp
->data_len
);
972 fsp
->cdb_cmd
.fc_flags
= fsp
->req_flags
& ~FCP_CFL_LEN_MASK
;
974 int_to_scsilun(fsp
->cmd
->device
->lun
,
975 (struct scsi_lun
*)fsp
->cdb_cmd
.fc_lun
);
976 memcpy(fsp
->cdb_cmd
.fc_cdb
, fsp
->cmd
->cmnd
, fsp
->cmd
->cmd_len
);
977 list_add_tail(&fsp
->list
, &si
->scsi_pkt_queue
);
979 spin_unlock_irq(lp
->host
->host_lock
);
980 rc
= lp
->tt
.fcp_cmd_send(lp
, fsp
, fc_fcp_recv
);
981 spin_lock_irq(lp
->host
->host_lock
);
983 list_del(&fsp
->list
);
988 static int fc_fcp_cmd_send(struct fc_lport
*lp
, struct fc_fcp_pkt
*fsp
,
989 void (*resp
)(struct fc_seq
*,
995 struct fc_rport
*rport
;
996 struct fc_rport_libfc_priv
*rp
;
997 const size_t len
= sizeof(fsp
->cdb_cmd
);
1000 if (fc_fcp_lock_pkt(fsp
))
1003 fp
= fc_frame_alloc(lp
, sizeof(fsp
->cdb_cmd
));
1009 memcpy(fc_frame_payload_get(fp
, len
), &fsp
->cdb_cmd
, len
);
1010 fr_cmd(fp
) = fsp
->cmd
;
1012 fsp
->max_payload
= rport
->maxframe_size
;
1013 rp
= rport
->dd_data
;
1015 fc_fill_fc_hdr(fp
, FC_RCTL_DD_UNSOL_CMD
, rport
->port_id
,
1016 fc_host_port_id(rp
->local_port
->host
), FC_TYPE_FCP
,
1017 FC_FC_FIRST_SEQ
| FC_FC_END_SEQ
| FC_FC_SEQ_INIT
, 0);
1019 seq
= lp
->tt
.exch_seq_send(lp
, fp
, resp
, fc_fcp_pkt_destroy
, fsp
, 0);
1025 fsp
->last_pkt_time
= jiffies
;
1027 fc_fcp_pkt_hold(fsp
); /* hold for fc_fcp_pkt_destroy */
1029 setup_timer(&fsp
->timer
, fc_fcp_timeout
, (unsigned long)fsp
);
1030 fc_fcp_timer_set(fsp
,
1031 (fsp
->tgt_flags
& FC_RP_FLAGS_REC_SUPPORTED
) ?
1032 FC_SCSI_REC_TOV
: FC_SCSI_ER_TIMEOUT
);
1034 fc_fcp_unlock_pkt(fsp
);
1039 * transport error handler
1041 static void fc_fcp_error(struct fc_fcp_pkt
*fsp
, struct fc_frame
*fp
)
1043 int error
= PTR_ERR(fp
);
1045 if (fc_fcp_lock_pkt(fsp
))
1050 fc_fcp_retry_cmd(fsp
);
1053 FC_DBG("unknown error %ld\n", PTR_ERR(fp
));
1056 * clear abort pending, because the lower layer
1057 * decided to force completion.
1059 fsp
->state
&= ~FC_SRB_ABORT_PENDING
;
1060 fsp
->status_code
= FC_CMD_PLOGO
;
1061 fc_fcp_complete_locked(fsp
);
1063 fc_fcp_unlock_pkt(fsp
);
1067 * Scsi abort handler- calls to send an abort
1068 * and then wait for abort completion
1070 static int fc_fcp_pkt_abort(struct fc_lport
*lp
, struct fc_fcp_pkt
*fsp
)
1074 if (fc_fcp_send_abort(fsp
))
1077 init_completion(&fsp
->tm_done
);
1078 fsp
->wait_for_comp
= 1;
1080 spin_unlock_bh(&fsp
->scsi_pkt_lock
);
1081 rc
= wait_for_completion_timeout(&fsp
->tm_done
, FC_SCSI_TM_TOV
);
1082 spin_lock_bh(&fsp
->scsi_pkt_lock
);
1083 fsp
->wait_for_comp
= 0;
1086 FC_DBG("target abort cmd failed\n");
1088 } else if (fsp
->state
& FC_SRB_ABORTED
) {
1089 FC_DBG("target abort cmd passed\n");
1091 fc_fcp_complete_locked(fsp
);
1098 * Retry LUN reset after resource allocation failed.
1100 static void fc_lun_reset_send(unsigned long data
)
1102 struct fc_fcp_pkt
*fsp
= (struct fc_fcp_pkt
*)data
;
1103 struct fc_lport
*lp
= fsp
->lp
;
1104 if (lp
->tt
.fcp_cmd_send(lp
, fsp
, fc_tm_done
)) {
1105 if (fsp
->recov_retry
++ >= FC_MAX_RECOV_RETRY
)
1107 if (fc_fcp_lock_pkt(fsp
))
1109 setup_timer(&fsp
->timer
, fc_lun_reset_send
, (unsigned long)fsp
);
1110 fc_fcp_timer_set(fsp
, FC_SCSI_REC_TOV
);
1111 fc_fcp_unlock_pkt(fsp
);
1116 * Scsi device reset handler- send a LUN RESET to the device
1117 * and wait for reset reply
1119 static int fc_lun_reset(struct fc_lport
*lp
, struct fc_fcp_pkt
*fsp
,
1120 unsigned int id
, unsigned int lun
)
1124 fsp
->cdb_cmd
.fc_dl
= htonl(fsp
->data_len
);
1125 fsp
->cdb_cmd
.fc_tm_flags
= FCP_TMF_LUN_RESET
;
1126 int_to_scsilun(lun
, (struct scsi_lun
*)fsp
->cdb_cmd
.fc_lun
);
1128 fsp
->wait_for_comp
= 1;
1129 init_completion(&fsp
->tm_done
);
1131 fc_lun_reset_send((unsigned long)fsp
);
1134 * wait for completion of reset
1135 * after that make sure all commands are terminated
1137 rc
= wait_for_completion_timeout(&fsp
->tm_done
, FC_SCSI_TM_TOV
);
1139 spin_lock_bh(&fsp
->scsi_pkt_lock
);
1140 fsp
->state
|= FC_SRB_COMPL
;
1141 spin_unlock_bh(&fsp
->scsi_pkt_lock
);
1143 del_timer_sync(&fsp
->timer
);
1145 spin_lock_bh(&fsp
->scsi_pkt_lock
);
1147 lp
->tt
.exch_done(fsp
->seq_ptr
);
1148 fsp
->seq_ptr
= NULL
;
1150 fsp
->wait_for_comp
= 0;
1151 spin_unlock_bh(&fsp
->scsi_pkt_lock
);
1154 FC_DBG("lun reset failed\n");
1158 /* cdb_status holds the tmf's rsp code */
1159 if (fsp
->cdb_status
!= FCP_TMF_CMPL
)
1162 FC_DBG("lun reset to lun %u completed\n", lun
);
1163 fc_fcp_cleanup_each_cmd(lp
, id
, lun
, FC_CMD_ABORTED
);
1168 * Task Managment response handler
1170 static void fc_tm_done(struct fc_seq
*seq
, struct fc_frame
*fp
, void *arg
)
1172 struct fc_fcp_pkt
*fsp
= arg
;
1173 struct fc_frame_header
*fh
;
1177 * If there is an error just let it timeout or wait
1178 * for TMF to be aborted if it timedout.
1180 * scsi-eh will escalate for when either happens.
1185 if (fc_fcp_lock_pkt(fsp
))
1189 * raced with eh timeout handler.
1191 if (!fsp
->seq_ptr
|| !fsp
->wait_for_comp
) {
1192 spin_unlock_bh(&fsp
->scsi_pkt_lock
);
1196 fh
= fc_frame_header_get(fp
);
1197 if (fh
->fh_type
!= FC_TYPE_BLS
)
1198 fc_fcp_resp(fsp
, fp
);
1199 fsp
->seq_ptr
= NULL
;
1200 fsp
->lp
->tt
.exch_done(seq
);
1202 fc_fcp_unlock_pkt(fsp
);
1205 static void fc_fcp_cleanup(struct fc_lport
*lp
)
1207 fc_fcp_cleanup_each_cmd(lp
, -1, -1, FC_ERROR
);
1211 * fc_fcp_timeout: called by OS timer function.
1213 * The timer has been inactivated and must be reactivated if desired
1214 * using fc_fcp_timer_set().
1218 * If REC is supported, just issue it, and return. The REC exchange will
1219 * complete or time out, and recovery can continue at that point.
1221 * Otherwise, if the response has been received without all the data,
1222 * it has been ER_TIMEOUT since the response was received.
1224 * If the response has not been received,
1225 * we see if data was received recently. If it has been, we continue waiting,
1226 * otherwise, we abort the command.
1228 static void fc_fcp_timeout(unsigned long data
)
1230 struct fc_fcp_pkt
*fsp
= (struct fc_fcp_pkt
*)data
;
1231 struct fc_rport
*rport
= fsp
->rport
;
1232 struct fc_rport_libfc_priv
*rp
= rport
->dd_data
;
1234 if (fc_fcp_lock_pkt(fsp
))
1237 if (fsp
->cdb_cmd
.fc_tm_flags
)
1240 fsp
->state
|= FC_SRB_FCP_PROCESSING_TMO
;
1242 if (rp
->flags
& FC_RP_FLAGS_REC_SUPPORTED
)
1244 else if (time_after_eq(fsp
->last_pkt_time
+ (FC_SCSI_ER_TIMEOUT
/ 2),
1246 fc_fcp_timer_set(fsp
, FC_SCSI_ER_TIMEOUT
);
1247 else if (fsp
->state
& FC_SRB_RCV_STATUS
)
1248 fc_fcp_complete_locked(fsp
);
1250 fc_timeout_error(fsp
);
1251 fsp
->state
&= ~FC_SRB_FCP_PROCESSING_TMO
;
1253 fc_fcp_unlock_pkt(fsp
);
1257 * Send a REC ELS request
1259 static void fc_fcp_rec(struct fc_fcp_pkt
*fsp
)
1261 struct fc_lport
*lp
;
1262 struct fc_frame
*fp
;
1263 struct fc_rport
*rport
;
1264 struct fc_rport_libfc_priv
*rp
;
1268 rp
= rport
->dd_data
;
1269 if (!fsp
->seq_ptr
|| rp
->rp_state
!= RPORT_ST_READY
) {
1270 fsp
->status_code
= FC_HRD_ERROR
;
1271 fsp
->io_status
= SUGGEST_RETRY
<< 24;
1272 fc_fcp_complete_locked(fsp
);
1275 fp
= fc_frame_alloc(lp
, sizeof(struct fc_els_rec
));
1279 fr_seq(fp
) = fsp
->seq_ptr
;
1280 fc_fill_fc_hdr(fp
, FC_RCTL_ELS_REQ
, rport
->port_id
,
1281 fc_host_port_id(rp
->local_port
->host
), FC_TYPE_ELS
,
1282 FC_FC_FIRST_SEQ
| FC_FC_END_SEQ
| FC_FC_SEQ_INIT
, 0);
1283 if (lp
->tt
.elsct_send(lp
, rport
, fp
, ELS_REC
, fc_fcp_rec_resp
,
1284 fsp
, jiffies_to_msecs(FC_SCSI_REC_TOV
))) {
1285 fc_fcp_pkt_hold(fsp
); /* hold while REC outstanding */
1290 if (fsp
->recov_retry
++ < FC_MAX_RECOV_RETRY
)
1291 fc_fcp_timer_set(fsp
, FC_SCSI_REC_TOV
);
1293 fc_timeout_error(fsp
);
1297 * Receive handler for REC ELS frame
1298 * if it is a reject then let the scsi layer to handle
1299 * the timeout. if it is a LS_ACC then if the io was not completed
1300 * then set the timeout and return otherwise complete the exchange
1301 * and tell the scsi layer to restart the I/O.
1303 static void fc_fcp_rec_resp(struct fc_seq
*seq
, struct fc_frame
*fp
, void *arg
)
1305 struct fc_fcp_pkt
*fsp
= (struct fc_fcp_pkt
*)arg
;
1306 struct fc_els_rec_acc
*recp
;
1307 struct fc_els_ls_rjt
*rjt
;
1311 enum dma_data_direction data_dir
;
1313 struct fc_rport_libfc_priv
*rp
;
1316 fc_fcp_rec_error(fsp
, fp
);
1320 if (fc_fcp_lock_pkt(fsp
))
1323 fsp
->recov_retry
= 0;
1324 opcode
= fc_frame_payload_op(fp
);
1325 if (opcode
== ELS_LS_RJT
) {
1326 rjt
= fc_frame_payload_get(fp
, sizeof(*rjt
));
1327 switch (rjt
->er_reason
) {
1329 FC_DEBUG_FCP("device %x unexpected REC reject "
1330 "reason %d expl %d\n",
1331 fsp
->rport
->port_id
, rjt
->er_reason
,
1335 FC_DEBUG_FCP("device does not support REC\n");
1336 rp
= fsp
->rport
->dd_data
;
1338 * if we do not spport RECs or got some bogus
1339 * reason then resetup timer so we check for
1342 rp
->flags
&= ~FC_RP_FLAGS_REC_SUPPORTED
;
1343 fc_fcp_timer_set(fsp
, FC_SCSI_ER_TIMEOUT
);
1348 * If no data transfer, the command frame got dropped
1349 * so we just retry. If data was transferred, we
1350 * lost the response but the target has no record,
1351 * so we abort and retry.
1353 if (rjt
->er_explan
== ELS_EXPL_OXID_RXID
&&
1354 fsp
->xfer_len
== 0) {
1355 fc_fcp_retry_cmd(fsp
);
1358 fc_timeout_error(fsp
);
1361 } else if (opcode
== ELS_LS_ACC
) {
1362 if (fsp
->state
& FC_SRB_ABORTED
)
1365 data_dir
= fsp
->cmd
->sc_data_direction
;
1366 recp
= fc_frame_payload_get(fp
, sizeof(*recp
));
1367 offset
= ntohl(recp
->reca_fc4value
);
1368 e_stat
= ntohl(recp
->reca_e_stat
);
1370 if (e_stat
& ESB_ST_COMPLETE
) {
1373 * The exchange is complete.
1375 * For output, we must've lost the response.
1376 * For input, all data must've been sent.
1377 * We lost may have lost the response
1378 * (and a confirmation was requested) and maybe
1381 * If all data received, send SRR
1382 * asking for response. If partial data received,
1383 * or gaps, SRR requests data at start of gap.
1384 * Recovery via SRR relies on in-order-delivery.
1386 if (data_dir
== DMA_TO_DEVICE
) {
1387 r_ctl
= FC_RCTL_DD_CMD_STATUS
;
1388 } else if (fsp
->xfer_contig_end
== offset
) {
1389 r_ctl
= FC_RCTL_DD_CMD_STATUS
;
1391 offset
= fsp
->xfer_contig_end
;
1392 r_ctl
= FC_RCTL_DD_SOL_DATA
;
1394 fc_fcp_srr(fsp
, r_ctl
, offset
);
1395 } else if (e_stat
& ESB_ST_SEQ_INIT
) {
1398 * The remote port has the initiative, so just
1399 * keep waiting for it to complete.
1401 fc_fcp_timer_set(fsp
, FC_SCSI_REC_TOV
);
1405 * The exchange is incomplete, we have seq. initiative.
1406 * Lost response with requested confirmation,
1407 * lost confirmation, lost transfer ready or
1410 * For output, if not all data was received, ask
1411 * for transfer ready to be repeated.
1413 * If we received or sent all the data, send SRR to
1416 * If we lost a response, we may have lost some read
1419 r_ctl
= FC_RCTL_DD_SOL_DATA
;
1420 if (data_dir
== DMA_TO_DEVICE
) {
1421 r_ctl
= FC_RCTL_DD_CMD_STATUS
;
1422 if (offset
< fsp
->data_len
)
1423 r_ctl
= FC_RCTL_DD_DATA_DESC
;
1424 } else if (offset
== fsp
->xfer_contig_end
) {
1425 r_ctl
= FC_RCTL_DD_CMD_STATUS
;
1426 } else if (fsp
->xfer_contig_end
< offset
) {
1427 offset
= fsp
->xfer_contig_end
;
1429 fc_fcp_srr(fsp
, r_ctl
, offset
);
1433 fc_fcp_unlock_pkt(fsp
);
1435 fc_fcp_pkt_release(fsp
); /* drop hold for outstanding REC */
1440 * Handle error response or timeout for REC exchange.
1442 static void fc_fcp_rec_error(struct fc_fcp_pkt
*fsp
, struct fc_frame
*fp
)
1444 int error
= PTR_ERR(fp
);
1446 if (fc_fcp_lock_pkt(fsp
))
1451 fc_fcp_retry_cmd(fsp
);
1455 FC_DBG("REC %p fid %x error unexpected error %d\n",
1456 fsp
, fsp
->rport
->port_id
, error
);
1457 fsp
->status_code
= FC_CMD_PLOGO
;
1460 case -FC_EX_TIMEOUT
:
1462 * Assume REC or LS_ACC was lost.
1463 * The exchange manager will have aborted REC, so retry.
1465 FC_DBG("REC fid %x error error %d retry %d/%d\n",
1466 fsp
->rport
->port_id
, error
, fsp
->recov_retry
,
1467 FC_MAX_RECOV_RETRY
);
1468 if (fsp
->recov_retry
++ < FC_MAX_RECOV_RETRY
)
1471 fc_timeout_error(fsp
);
1474 fc_fcp_unlock_pkt(fsp
);
1476 fc_fcp_pkt_release(fsp
); /* drop hold for outstanding REC */
1480 * Time out error routine:
1481 * abort's the I/O close the exchange and
1482 * send completion notification to scsi layer
1484 static void fc_timeout_error(struct fc_fcp_pkt
*fsp
)
1486 fsp
->status_code
= FC_CMD_TIME_OUT
;
1487 fsp
->cdb_status
= 0;
1490 * if this fails then we let the scsi command timer fire and
1493 fc_fcp_send_abort(fsp
);
1497 * Sequence retransmission request.
1498 * This is called after receiving status but insufficient data, or
1499 * when expecting status but the request has timed out.
1501 static void fc_fcp_srr(struct fc_fcp_pkt
*fsp
, enum fc_rctl r_ctl
, u32 offset
)
1503 struct fc_lport
*lp
= fsp
->lp
;
1504 struct fc_rport
*rport
;
1505 struct fc_rport_libfc_priv
*rp
;
1506 struct fc_exch
*ep
= fc_seq_exch(fsp
->seq_ptr
);
1508 struct fcp_srr
*srr
;
1509 struct fc_frame
*fp
;
1513 rp
= rport
->dd_data
;
1514 cdb_op
= fsp
->cdb_cmd
.fc_cdb
[0];
1516 if (!(rp
->flags
& FC_RP_FLAGS_RETRY
) || rp
->rp_state
!= RPORT_ST_READY
)
1517 goto retry
; /* shouldn't happen */
1518 fp
= fc_frame_alloc(lp
, sizeof(*srr
));
1522 srr
= fc_frame_payload_get(fp
, sizeof(*srr
));
1523 memset(srr
, 0, sizeof(*srr
));
1524 srr
->srr_op
= ELS_SRR
;
1525 srr
->srr_ox_id
= htons(ep
->oxid
);
1526 srr
->srr_rx_id
= htons(ep
->rxid
);
1527 srr
->srr_r_ctl
= r_ctl
;
1528 srr
->srr_rel_off
= htonl(offset
);
1530 fc_fill_fc_hdr(fp
, FC_RCTL_ELS4_REQ
, rport
->port_id
,
1531 fc_host_port_id(rp
->local_port
->host
), FC_TYPE_FCP
,
1532 FC_FC_FIRST_SEQ
| FC_FC_END_SEQ
| FC_FC_SEQ_INIT
, 0);
1534 seq
= lp
->tt
.exch_seq_send(lp
, fp
, fc_fcp_srr_resp
, NULL
,
1535 fsp
, jiffies_to_msecs(FC_SCSI_REC_TOV
));
1540 fsp
->recov_seq
= seq
;
1541 fsp
->xfer_len
= offset
;
1542 fsp
->xfer_contig_end
= offset
;
1543 fsp
->state
&= ~FC_SRB_RCV_STATUS
;
1544 fc_fcp_pkt_hold(fsp
); /* hold for outstanding SRR */
1547 fc_fcp_retry_cmd(fsp
);
1551 * Handle response from SRR.
1553 static void fc_fcp_srr_resp(struct fc_seq
*seq
, struct fc_frame
*fp
, void *arg
)
1555 struct fc_fcp_pkt
*fsp
= arg
;
1556 struct fc_frame_header
*fh
;
1559 fc_fcp_srr_error(fsp
, fp
);
1563 if (fc_fcp_lock_pkt(fsp
))
1566 fh
= fc_frame_header_get(fp
);
1568 * BUG? fc_fcp_srr_error calls exch_done which would release
1569 * the ep. But if fc_fcp_srr_error had got -FC_EX_TIMEOUT,
1570 * then fc_exch_timeout would be sending an abort. The exch_done
1571 * call by fc_fcp_srr_error would prevent fc_exch.c from seeing
1572 * an abort response though.
1574 if (fh
->fh_type
== FC_TYPE_BLS
) {
1575 fc_fcp_unlock_pkt(fsp
);
1579 fsp
->recov_seq
= NULL
;
1580 switch (fc_frame_payload_op(fp
)) {
1582 fsp
->recov_retry
= 0;
1583 fc_fcp_timer_set(fsp
, FC_SCSI_REC_TOV
);
1587 fc_timeout_error(fsp
);
1590 fc_fcp_unlock_pkt(fsp
);
1591 fsp
->lp
->tt
.exch_done(seq
);
1594 fc_fcp_pkt_release(fsp
); /* drop hold for outstanding SRR */
1597 static void fc_fcp_srr_error(struct fc_fcp_pkt
*fsp
, struct fc_frame
*fp
)
1599 if (fc_fcp_lock_pkt(fsp
))
1601 fsp
->lp
->tt
.exch_done(fsp
->recov_seq
);
1602 fsp
->recov_seq
= NULL
;
1603 switch (PTR_ERR(fp
)) {
1604 case -FC_EX_TIMEOUT
:
1605 if (fsp
->recov_retry
++ < FC_MAX_RECOV_RETRY
)
1608 fc_timeout_error(fsp
);
1610 case -FC_EX_CLOSED
: /* e.g., link failure */
1613 fc_fcp_retry_cmd(fsp
);
1616 fc_fcp_unlock_pkt(fsp
);
1618 fc_fcp_pkt_release(fsp
); /* drop hold for outstanding SRR */
1621 static inline int fc_fcp_lport_queue_ready(struct fc_lport
*lp
)
1624 return (lp
->state
== LPORT_ST_READY
) && (lp
->link_status
& FC_LINK_UP
);
1628 * fc_queuecommand - The queuecommand function of the scsi template
1629 * @cmd: struct scsi_cmnd to be executed
1630 * @done: Callback function to be called when cmd is completed
1632 * this is the i/o strategy routine, called by the scsi layer
1633 * this routine is called with holding the host_lock.
1635 int fc_queuecommand(struct scsi_cmnd
*sc_cmd
, void (*done
)(struct scsi_cmnd
*))
1637 struct fc_lport
*lp
;
1638 struct fc_rport
*rport
= starget_to_rport(scsi_target(sc_cmd
->device
));
1639 struct fc_fcp_pkt
*fsp
;
1640 struct fc_rport_libfc_priv
*rp
;
1643 struct fcoe_dev_stats
*stats
;
1645 lp
= shost_priv(sc_cmd
->device
->host
);
1647 rval
= fc_remote_port_chkready(rport
);
1649 sc_cmd
->result
= rval
;
1654 if (!*(struct fc_remote_port
**)rport
->dd_data
) {
1656 * rport is transitioning from blocked/deleted to
1659 sc_cmd
->result
= DID_IMM_RETRY
<< 16;
1664 rp
= rport
->dd_data
;
1666 if (!fc_fcp_lport_queue_ready(lp
)) {
1667 rc
= SCSI_MLQUEUE_HOST_BUSY
;
1671 fsp
= fc_fcp_pkt_alloc(lp
, GFP_ATOMIC
);
1673 rc
= SCSI_MLQUEUE_HOST_BUSY
;
1678 * build the libfc request pkt
1680 fsp
->cmd
= sc_cmd
; /* save the cmd */
1681 fsp
->lp
= lp
; /* save the softc ptr */
1682 fsp
->rport
= rport
; /* set the remote port ptr */
1683 sc_cmd
->scsi_done
= done
;
1686 * set up the transfer length
1688 fsp
->data_len
= scsi_bufflen(sc_cmd
);
1692 * setup the data direction
1694 stats
= lp
->dev_stats
[smp_processor_id()];
1695 if (sc_cmd
->sc_data_direction
== DMA_FROM_DEVICE
) {
1696 fsp
->req_flags
= FC_SRB_READ
;
1697 stats
->InputRequests
++;
1698 stats
->InputMegabytes
= fsp
->data_len
;
1699 } else if (sc_cmd
->sc_data_direction
== DMA_TO_DEVICE
) {
1700 fsp
->req_flags
= FC_SRB_WRITE
;
1701 stats
->OutputRequests
++;
1702 stats
->OutputMegabytes
= fsp
->data_len
;
1705 stats
->ControlRequests
++;
1708 fsp
->tgt_flags
= rp
->flags
;
1710 init_timer(&fsp
->timer
);
1711 fsp
->timer
.data
= (unsigned long)fsp
;
1714 * send it to the lower layer
1715 * if we get -1 return then put the request in the pending
1718 rval
= fc_fcp_pkt_send(lp
, fsp
);
1720 fsp
->state
= FC_SRB_FREE
;
1721 fc_fcp_pkt_release(fsp
);
1722 rc
= SCSI_MLQUEUE_HOST_BUSY
;
1727 EXPORT_SYMBOL(fc_queuecommand
);
1730 * fc_io_compl - Handle responses for completed commands
1733 * Translates a error to a Linux SCSI error.
1735 * The fcp packet lock must be held when calling.
1737 static void fc_io_compl(struct fc_fcp_pkt
*fsp
)
1739 struct fc_fcp_internal
*si
;
1740 struct scsi_cmnd
*sc_cmd
;
1741 struct fc_lport
*lp
;
1742 unsigned long flags
;
1744 fsp
->state
|= FC_SRB_COMPL
;
1745 if (!(fsp
->state
& FC_SRB_FCP_PROCESSING_TMO
)) {
1746 spin_unlock_bh(&fsp
->scsi_pkt_lock
);
1747 del_timer_sync(&fsp
->timer
);
1748 spin_lock_bh(&fsp
->scsi_pkt_lock
);
1752 si
= fc_get_scsi_internal(lp
);
1753 spin_lock_irqsave(lp
->host
->host_lock
, flags
);
1755 spin_unlock_irqrestore(lp
->host
->host_lock
, flags
);
1760 * if a command timed out while we had to try and throttle IO
1761 * and it is now getting cleaned up, then we are about to
1762 * try again so clear the throttled flag incase we get more
1765 if (si
->throttled
&& fsp
->state
& FC_SRB_NOMEM
)
1771 if (!sc_cmd
->SCp
.ptr
) {
1772 spin_unlock_irqrestore(lp
->host
->host_lock
, flags
);
1776 CMD_SCSI_STATUS(sc_cmd
) = fsp
->cdb_status
;
1777 switch (fsp
->status_code
) {
1779 if (fsp
->cdb_status
== 0) {
1783 sc_cmd
->result
= DID_OK
<< 16;
1784 if (fsp
->scsi_resid
)
1785 CMD_RESID_LEN(sc_cmd
) = fsp
->scsi_resid
;
1786 } else if (fsp
->cdb_status
== QUEUE_FULL
) {
1787 struct scsi_device
*tmp_sdev
;
1788 struct scsi_device
*sdev
= sc_cmd
->device
;
1790 shost_for_each_device(tmp_sdev
, sdev
->host
) {
1791 if (tmp_sdev
->id
!= sdev
->id
)
1794 if (tmp_sdev
->queue_depth
> 1) {
1795 scsi_track_queue_full(tmp_sdev
,
1800 sc_cmd
->result
= (DID_OK
<< 16) | fsp
->cdb_status
;
1803 * transport level I/O was ok but scsi
1804 * has non zero status
1806 sc_cmd
->result
= (DID_OK
<< 16) | fsp
->cdb_status
;
1810 sc_cmd
->result
= DID_ERROR
<< 16;
1812 case FC_DATA_UNDRUN
:
1813 if (fsp
->cdb_status
== 0) {
1815 * scsi status is good but transport level
1816 * underrun. for read it should be an error??
1818 sc_cmd
->result
= (DID_OK
<< 16) | fsp
->cdb_status
;
1821 * scsi got underrun, this is an error
1823 CMD_RESID_LEN(sc_cmd
) = fsp
->scsi_resid
;
1824 sc_cmd
->result
= (DID_ERROR
<< 16) | fsp
->cdb_status
;
1827 case FC_DATA_OVRRUN
:
1829 * overrun is an error
1831 sc_cmd
->result
= (DID_ERROR
<< 16) | fsp
->cdb_status
;
1833 case FC_CMD_ABORTED
:
1834 sc_cmd
->result
= (DID_ABORT
<< 16) | fsp
->io_status
;
1836 case FC_CMD_TIME_OUT
:
1837 sc_cmd
->result
= (DID_BUS_BUSY
<< 16) | fsp
->io_status
;
1840 sc_cmd
->result
= (DID_RESET
<< 16);
1843 sc_cmd
->result
= (DID_NO_CONNECT
<< 16);
1846 sc_cmd
->result
= (DID_ERROR
<< 16);
1850 list_del(&fsp
->list
);
1851 sc_cmd
->SCp
.ptr
= NULL
;
1852 sc_cmd
->scsi_done(sc_cmd
);
1853 spin_unlock_irqrestore(lp
->host
->host_lock
, flags
);
1855 /* release ref from initial allocation in queue command */
1856 fc_fcp_pkt_release(fsp
);
1860 * fc_fcp_complete - complete processing of a fcp packet
1863 * This function may sleep if a fsp timer is pending.
1864 * The host lock must not be held by caller.
1866 void fc_fcp_complete(struct fc_fcp_pkt
*fsp
)
1868 if (fc_fcp_lock_pkt(fsp
))
1871 fc_fcp_complete_locked(fsp
);
1872 fc_fcp_unlock_pkt(fsp
);
1874 EXPORT_SYMBOL(fc_fcp_complete
);
1877 * fc_eh_abort - Abort a command...from scsi host template
1878 * @sc_cmd: scsi command to abort
1880 * send ABTS to the target device and wait for the response
1881 * sc_cmd is the pointer to the command to be aborted.
1883 int fc_eh_abort(struct scsi_cmnd
*sc_cmd
)
1885 struct fc_fcp_pkt
*fsp
;
1886 struct fc_lport
*lp
;
1888 unsigned long flags
;
1890 lp
= shost_priv(sc_cmd
->device
->host
);
1891 if (lp
->state
!= LPORT_ST_READY
)
1893 else if (!(lp
->link_status
& FC_LINK_UP
))
1896 spin_lock_irqsave(lp
->host
->host_lock
, flags
);
1897 fsp
= CMD_SP(sc_cmd
);
1899 /* command completed while scsi eh was setting up */
1900 spin_unlock_irqrestore(lp
->host
->host_lock
, flags
);
1903 /* grab a ref so the fsp and sc_cmd cannot be relased from under us */
1904 fc_fcp_pkt_hold(fsp
);
1905 spin_unlock_irqrestore(lp
->host
->host_lock
, flags
);
1907 if (fc_fcp_lock_pkt(fsp
)) {
1908 /* completed while we were waiting for timer to be deleted */
1913 rc
= fc_fcp_pkt_abort(lp
, fsp
);
1914 fc_fcp_unlock_pkt(fsp
);
1917 fc_fcp_pkt_release(fsp
);
1920 EXPORT_SYMBOL(fc_eh_abort
);
1923 * fc_eh_device_reset: Reset a single LUN
1924 * @sc_cmd: scsi command
1926 * Set from scsi host template to send tm cmd to the target and wait for the
1929 int fc_eh_device_reset(struct scsi_cmnd
*sc_cmd
)
1931 struct fc_lport
*lp
;
1932 struct fc_fcp_pkt
*fsp
;
1933 struct fc_rport
*rport
= starget_to_rport(scsi_target(sc_cmd
->device
));
1935 struct fc_rport_libfc_priv
*rp
;
1938 rval
= fc_remote_port_chkready(rport
);
1942 rp
= rport
->dd_data
;
1943 lp
= shost_priv(sc_cmd
->device
->host
);
1945 if (lp
->state
!= LPORT_ST_READY
)
1948 fsp
= fc_fcp_pkt_alloc(lp
, GFP_NOIO
);
1950 FC_DBG("could not allocate scsi_pkt\n");
1951 sc_cmd
->result
= DID_NO_CONNECT
<< 16;
1956 * Build the libfc request pkt. Do not set the scsi cmnd, because
1957 * the sc passed in is not setup for execution like when sent
1958 * through the queuecommand callout.
1960 fsp
->lp
= lp
; /* save the softc ptr */
1961 fsp
->rport
= rport
; /* set the remote port ptr */
1964 * flush outstanding commands
1966 rc
= fc_lun_reset(lp
, fsp
, scmd_id(sc_cmd
), sc_cmd
->device
->lun
);
1967 fsp
->state
= FC_SRB_FREE
;
1968 fc_fcp_pkt_release(fsp
);
1973 EXPORT_SYMBOL(fc_eh_device_reset
);
1976 * fc_eh_host_reset - The reset function will reset the ports on the host.
1977 * @sc_cmd: scsi command
1979 int fc_eh_host_reset(struct scsi_cmnd
*sc_cmd
)
1981 struct Scsi_Host
*shost
= sc_cmd
->device
->host
;
1982 struct fc_lport
*lp
= shost_priv(shost
);
1983 unsigned long wait_tmo
;
1985 lp
->tt
.lport_reset(lp
);
1986 wait_tmo
= jiffies
+ FC_HOST_RESET_TIMEOUT
;
1987 while (!fc_fcp_lport_queue_ready(lp
) && time_before(jiffies
, wait_tmo
))
1990 if (fc_fcp_lport_queue_ready(lp
)) {
1991 shost_printk(KERN_INFO
, shost
, "Host reset succeeded.\n");
1994 shost_printk(KERN_INFO
, shost
, "Host reset failed. "
1995 "lport not ready.\n");
1999 EXPORT_SYMBOL(fc_eh_host_reset
);
2002 * fc_slave_alloc - configure queue depth
2003 * @sdev: scsi device
2005 * Configures queue depth based on host's cmd_per_len. If not set
2006 * then we use the libfc default.
2008 int fc_slave_alloc(struct scsi_device
*sdev
)
2010 struct fc_rport
*rport
= starget_to_rport(scsi_target(sdev
));
2013 if (!rport
|| fc_remote_port_chkready(rport
))
2016 if (sdev
->tagged_supported
) {
2017 if (sdev
->host
->hostt
->cmd_per_lun
)
2018 queue_depth
= sdev
->host
->hostt
->cmd_per_lun
;
2020 queue_depth
= FC_FCP_DFLT_QUEUE_DEPTH
;
2021 scsi_activate_tcq(sdev
, queue_depth
);
2025 EXPORT_SYMBOL(fc_slave_alloc
);
2027 int fc_change_queue_depth(struct scsi_device
*sdev
, int qdepth
)
2029 scsi_adjust_queue_depth(sdev
, scsi_get_tag_type(sdev
), qdepth
);
2030 return sdev
->queue_depth
;
2032 EXPORT_SYMBOL(fc_change_queue_depth
);
2034 int fc_change_queue_type(struct scsi_device
*sdev
, int tag_type
)
2036 if (sdev
->tagged_supported
) {
2037 scsi_set_tag_type(sdev
, tag_type
);
2039 scsi_activate_tcq(sdev
, sdev
->queue_depth
);
2041 scsi_deactivate_tcq(sdev
, sdev
->queue_depth
);
2047 EXPORT_SYMBOL(fc_change_queue_type
);
2049 void fc_fcp_destroy(struct fc_lport
*lp
)
2051 struct fc_fcp_internal
*si
= fc_get_scsi_internal(lp
);
2053 if (!list_empty(&si
->scsi_pkt_queue
))
2054 printk(KERN_ERR
"Leaked scsi packets.\n");
2056 mempool_destroy(si
->scsi_pkt_pool
);
2058 lp
->scsi_priv
= NULL
;
2060 EXPORT_SYMBOL(fc_fcp_destroy
);
2062 int fc_fcp_init(struct fc_lport
*lp
)
2065 struct fc_fcp_internal
*si
;
2067 if (!lp
->tt
.fcp_cmd_send
)
2068 lp
->tt
.fcp_cmd_send
= fc_fcp_cmd_send
;
2070 if (!lp
->tt
.fcp_cleanup
)
2071 lp
->tt
.fcp_cleanup
= fc_fcp_cleanup
;
2073 if (!lp
->tt
.fcp_abort_io
)
2074 lp
->tt
.fcp_abort_io
= fc_fcp_abort_io
;
2076 si
= kzalloc(sizeof(struct fc_fcp_internal
), GFP_KERNEL
);
2080 INIT_LIST_HEAD(&si
->scsi_pkt_queue
);
2082 si
->scsi_pkt_pool
= mempool_create_slab_pool(2, scsi_pkt_cachep
);
2083 if (!si
->scsi_pkt_pool
) {
2093 EXPORT_SYMBOL(fc_fcp_init
);
2095 static int __init
libfc_init(void)
2099 scsi_pkt_cachep
= kmem_cache_create("libfc_fcp_pkt",
2100 sizeof(struct fc_fcp_pkt
),
2101 0, SLAB_HWCACHE_ALIGN
, NULL
);
2102 if (scsi_pkt_cachep
== NULL
) {
2103 FC_DBG("Unable to allocate SRB cache...module load failed!");
2107 rc
= fc_setup_exch_mgr();
2109 goto destroy_pkt_cache
;
2111 rc
= fc_setup_rport();
2117 fc_destroy_exch_mgr();
2119 kmem_cache_destroy(scsi_pkt_cachep
);
2123 static void __exit
libfc_exit(void)
2125 kmem_cache_destroy(scsi_pkt_cachep
);
2126 fc_destroy_exch_mgr();
2130 module_init(libfc_init
);
2131 module_exit(libfc_exit
);