include/linux/nl80211.h

   1 #ifndef __LINUX_NL80211_H
   2 #define __LINUX_NL80211_H
   3 /*
   4  * 802.11 netlink interface public header
   5  *
   6  * Copyright 2006, 2007 Johannes Berg <johannes@sipsolutions.net>
   7  */
   8
   9 /**
  10  * DOC: Station handling
  11  *
  12  * Stations are added per interface, but a special case exists with VLAN
  13  * interfaces. When a station is bound to an AP interface, it may be moved
  14  * into a VLAN identified by a VLAN interface index (%NL80211_ATTR_STA_VLAN).
  15  * The station is still assumed to belong to the AP interface it was added
  16  * to.
  17  *
  18  * TODO: need more info?
  19  */
  20
  21 /**
  22  * enum nl80211_commands - supported nl80211 commands
  23  *
  24  * @NL80211_CMD_UNSPEC: unspecified command to catch errors
  25  *
  26  * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request
  27  *      to get a list of all present wiphys.
  28  * @NL80211_CMD_SET_WIPHY: set wiphy name, needs %NL80211_ATTR_WIPHY and
  29  *      %NL80211_ATTR_WIPHY_NAME.
  30  * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
  31  *      or rename notification. Has attributes %NL80211_ATTR_WIPHY and
  32  *      %NL80211_ATTR_WIPHY_NAME.
  33  * @NL80211_CMD_DEL_WIPHY: Wiphy deleted. Has attributes
  34  *      %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME.
  35  *
  36  * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration;
  37  *      either a dump request on a %NL80211_ATTR_WIPHY or a specific get
  38  *      on an %NL80211_ATTR_IFINDEX is supported.
  39  * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires
  40  *      %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE.
  41  * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response
  42  *      to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX,
  43  *      %NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also
  44  *      be sent from userspace to request creation of a new virtual interface,
  45  *      then requires attributes %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFTYPE and
  46  *      %NL80211_ATTR_IFNAME.
  47  * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes
  48  *      %NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from
  49  *      userspace to request deletion of a virtual interface, then requires
  50  *      attribute %NL80211_ATTR_IFINDEX.
  51  *
  52  * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified
  53  *      by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC.
  54  * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT or
  55  *      %NL80211_ATTR_KEY_THRESHOLD.
  56  * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA,
  57  *      %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC and %NL80211_ATTR_KEY_CIPHER
  58  *      attributes.
  59  * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX
  60  *      or %NL80211_ATTR_MAC.
  61  *
  62  * @NL80211_CMD_GET_BEACON: retrieve beacon information (returned in a
  63  *      %NL80222_CMD_NEW_BEACON message)
  64  * @NL80211_CMD_SET_BEACON: set the beacon on an access point interface
  65  *      using the %NL80211_ATTR_BEACON_INTERVAL, %NL80211_ATTR_DTIM_PERIOD,
  66  *      %NL80211_BEACON_HEAD and %NL80211_BEACON_TAIL attributes.
  67  * @NL80211_CMD_NEW_BEACON: add a new beacon to an access point interface,
  68  *      parameters are like for %NL80211_CMD_SET_BEACON.
  69  * @NL80211_CMD_DEL_BEACON: remove the beacon, stop sending it
  70  *
  71  * @NL80211_CMD_GET_STATION: Get station attributes for station identified by
  72  *      %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
  73  * @NL80211_CMD_SET_STATION: Set station attributes for station identified by
  74  *      %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
  75  * @NL80211_CMD_NEW_STATION: Add a station with given attributes to the
  76  *      the interface identified by %NL80211_ATTR_IFINDEX.
  77  * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC
  78  *      or, if no MAC address given, all stations, on the interface identified
  79  *      by %NL80211_ATTR_IFINDEX.
  80  *
  81  * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to
  82  *      destination %NL80211_ATTR_MAC on the interface identified by
  83  *      %NL80211_ATTR_IFINDEX.
  84  * @NL80211_CMD_SET_MPATH:  Set mesh path attributes for mesh path to
  85  *      destination %NL80211_ATTR_MAC on the interface identified by
  86  *      %NL80211_ATTR_IFINDEX.
  87  * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the
  88  *      the interface identified by %NL80211_ATTR_IFINDEX.
  89  * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC
  90  *      or, if no MAC address given, all mesh paths, on the interface identified
  91  *      by %NL80211_ATTR_IFINDEX.
  92  *
  93  * @NL80211_CMD_MAX: highest used command number
  94  * @__NL80211_CMD_AFTER_LAST: internal use
  95  */
  96 enum nl80211_commands {
  97 /* don't change the order or add anything inbetween, this is ABI! */
  98         NL80211_CMD_UNSPEC,
  99
 100         NL80211_CMD_GET_WIPHY,          /* can dump */
 101         NL80211_CMD_SET_WIPHY,
 102         NL80211_CMD_NEW_WIPHY,
 103         NL80211_CMD_DEL_WIPHY,
 104
 105         NL80211_CMD_GET_INTERFACE,      /* can dump */
 106         NL80211_CMD_SET_INTERFACE,
 107         NL80211_CMD_NEW_INTERFACE,
 108         NL80211_CMD_DEL_INTERFACE,
 109
 110         NL80211_CMD_GET_KEY,
 111         NL80211_CMD_SET_KEY,
 112         NL80211_CMD_NEW_KEY,
 113         NL80211_CMD_DEL_KEY,
 114
 115         NL80211_CMD_GET_BEACON,
 116         NL80211_CMD_SET_BEACON,
 117         NL80211_CMD_NEW_BEACON,
 118         NL80211_CMD_DEL_BEACON,
 119
 120         NL80211_CMD_GET_STATION,
 121         NL80211_CMD_SET_STATION,
 122         NL80211_CMD_NEW_STATION,
 123         NL80211_CMD_DEL_STATION,
 124
 125         NL80211_CMD_GET_MPATH,
 126         NL80211_CMD_SET_MPATH,
 127         NL80211_CMD_NEW_MPATH,
 128         NL80211_CMD_DEL_MPATH,
 129
 130         /* add commands here */
 131
 132         /* used to define NL80211_CMD_MAX below */
 133         __NL80211_CMD_AFTER_LAST,
 134         NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1
 135 };
 136
 137
 138 /**
 139  * enum nl80211_attrs - nl80211 netlink attributes
 140  *
 141  * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors
 142  *
 143  * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf.
 144  *      /sys/class/ieee80211/<phyname>/index
 145  * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming)
 146  *
 147  * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on
 148  * @NL80211_ATTR_IFNAME: network interface name
 149  * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype
 150  *
 151  * @NL80211_ATTR_MAC: MAC address (various uses)
 152  *
 153  * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of
 154  *      16 bytes encryption key followed by 8 bytes each for TX and RX MIC
 155  *      keys
 156  * @NL80211_ATTR_KEY_IDX: key ID (u8, 0-3)
 157  * @NL80211_ATTR_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11
 158  *      section 7.3.2.25.1, e.g. 0x000FAC04)
 159  * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
 160  *      CCMP keys, each six bytes in little endian
 161  *
 162  * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU
 163  * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing
 164  * @NL80211_ATTR_BEACON_HEAD: portion of the beacon before the TIM IE
 165  * @NL80211_ATTR_BEACON_TAIL: portion of the beacon after the TIM IE
 166  *
 167  * @NL80211_ATTR_STA_AID: Association ID for the station (u16)
 168  * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of
 169  *      &enum nl80211_sta_flags.
 170  * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by
 171  *      IEEE 802.11 7.3.1.6 (u16).
 172  * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported
 173  *      rates as defined by IEEE 802.11 7.3.2.2 but without the length
 174  *      restriction (at most %NL80211_MAX_SUPP_RATES).
 175  * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station
 176  *      to, or the AP interface the station was originally added to to.
 177  * @NL80211_ATTR_STA_INFO: information about a station, part of station info
 178  *      given for %NL80211_CMD_GET_STATION, nested attribute containing
 179  *      info as possible, see &enum nl80211_sta_info.
 180  *
 181  * @NL80211_ATTR_WIPHY_BANDS: Information about an operating bands,
 182  *      consisting of a nested array.
 183  *
 184  * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes).
 185  * @NL80211_ATTR_PLINK_ACTION: action to perform on the mesh peer link.
 186  * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path.
 187  * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path
 188  *      info given for %NL80211_CMD_GET_MPATH, nested attribute described at
 189  *      &enum nl80211_mpath_info.
 190  *
 191  *
 192  * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of
 193  *      &enum nl80211_mntr_flags.
 194  *
 195  * @NL80211_ATTR_MAX: highest attribute number currently defined
 196  * @__NL80211_ATTR_AFTER_LAST: internal use
 197  */
 198 enum nl80211_attrs {
 199 /* don't change the order or add anything inbetween, this is ABI! */
 200         NL80211_ATTR_UNSPEC,
 201
 202         NL80211_ATTR_WIPHY,
 203         NL80211_ATTR_WIPHY_NAME,
 204
 205         NL80211_ATTR_IFINDEX,
 206         NL80211_ATTR_IFNAME,
 207         NL80211_ATTR_IFTYPE,
 208
 209         NL80211_ATTR_MAC,
 210
 211         NL80211_ATTR_KEY_DATA,
 212         NL80211_ATTR_KEY_IDX,
 213         NL80211_ATTR_KEY_CIPHER,
 214         NL80211_ATTR_KEY_SEQ,
 215         NL80211_ATTR_KEY_DEFAULT,
 216
 217         NL80211_ATTR_BEACON_INTERVAL,
 218         NL80211_ATTR_DTIM_PERIOD,
 219         NL80211_ATTR_BEACON_HEAD,
 220         NL80211_ATTR_BEACON_TAIL,
 221
 222         NL80211_ATTR_STA_AID,
 223         NL80211_ATTR_STA_FLAGS,
 224         NL80211_ATTR_STA_LISTEN_INTERVAL,
 225         NL80211_ATTR_STA_SUPPORTED_RATES,
 226         NL80211_ATTR_STA_VLAN,
 227         NL80211_ATTR_STA_INFO,
 228
 229         NL80211_ATTR_WIPHY_BANDS,
 230
 231         NL80211_ATTR_MNTR_FLAGS,
 232
 233         NL80211_ATTR_MESH_ID,
 234         NL80211_ATTR_STA_PLINK_ACTION,
 235         NL80211_ATTR_MPATH_NEXT_HOP,
 236         NL80211_ATTR_MPATH_INFO,
 237
 238         /* add attributes here, update the policy in nl80211.c */
 239
 240         __NL80211_ATTR_AFTER_LAST,
 241         NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1
 242 };
 243
 244 #define NL80211_MAX_SUPP_RATES                  32
 245 #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY       0
 246 #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY     16
 247 #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY     24
 248
 249 /**
 250  * enum nl80211_iftype - (virtual) interface types
 251  *
 252  * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides
 253  * @NL80211_IFTYPE_ADHOC: independent BSS member
 254  * @NL80211_IFTYPE_STATION: managed BSS member
 255  * @NL80211_IFTYPE_AP: access point
 256  * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points
 257  * @NL80211_IFTYPE_WDS: wireless distribution interface
 258  * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames
 259  * @NL80211_IFTYPE_MESH_POINT: mesh point
 260  * @NL80211_IFTYPE_MAX: highest interface type number currently defined
 261  * @__NL80211_IFTYPE_AFTER_LAST: internal use
 262  *
 263  * These values are used with the %NL80211_ATTR_IFTYPE
 264  * to set the type of an interface.
 265  *
 266  */
 267 enum nl80211_iftype {
 268         NL80211_IFTYPE_UNSPECIFIED,
 269         NL80211_IFTYPE_ADHOC,
 270         NL80211_IFTYPE_STATION,
 271         NL80211_IFTYPE_AP,
 272         NL80211_IFTYPE_AP_VLAN,
 273         NL80211_IFTYPE_WDS,
 274         NL80211_IFTYPE_MONITOR,
 275         NL80211_IFTYPE_MESH_POINT,
 276
 277         /* keep last */
 278         __NL80211_IFTYPE_AFTER_LAST,
 279         NL80211_IFTYPE_MAX = __NL80211_IFTYPE_AFTER_LAST - 1
 280 };
 281
 282 /**
 283  * enum nl80211_sta_flags - station flags
 284  *
 285  * Station flags. When a station is added to an AP interface, it is
 286  * assumed to be already associated (and hence authenticated.)
 287  *
 288  * @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X)
 289  * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames
 290  *      with short barker preamble
 291  * @NL80211_STA_FLAG_WME: station is WME/QoS capable
 292  */
 293 enum nl80211_sta_flags {
 294         __NL80211_STA_FLAG_INVALID,
 295         NL80211_STA_FLAG_AUTHORIZED,
 296         NL80211_STA_FLAG_SHORT_PREAMBLE,
 297         NL80211_STA_FLAG_WME,
 298
 299         /* keep last */
 300         __NL80211_STA_FLAG_AFTER_LAST,
 301         NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1
 302 };
 303
 304 /**
 305  * enum nl80211_sta_info - station information
 306  *
 307  * These attribute types are used with %NL80211_ATTR_STA_INFO
 308  * when getting information about a station.
 309  *
 310  * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved
 311  * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)
 312  * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station)
 313  * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
 314  * @__NL80211_STA_INFO_AFTER_LAST: internal
 315  * @NL80211_STA_INFO_MAX: highest possible station info attribute
 316  */
 317 enum nl80211_sta_info {
 318         __NL80211_STA_INFO_INVALID,
 319         NL80211_STA_INFO_INACTIVE_TIME,
 320         NL80211_STA_INFO_RX_BYTES,
 321         NL80211_STA_INFO_TX_BYTES,
 322         NL80211_STA_INFO_LLID,
 323         NL80211_STA_INFO_PLID,
 324         NL80211_STA_INFO_PLINK_STATE,
 325
 326         /* keep last */
 327         __NL80211_STA_INFO_AFTER_LAST,
 328         NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1
 329 };
 330
 331 /**
 332  * enum nl80211_mpath_flags - nl80211 mesh path flags
 333  *
 334  * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active
 335  * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running
 336  * @NL80211_MPATH_FLAG_DSN_VALID: the mesh path contains a valid DSN
 337  * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set
 338  * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded
 339  */
 340 enum nl80211_mpath_flags {
 341         NL80211_MPATH_FLAG_ACTIVE =     1<<0,
 342         NL80211_MPATH_FLAG_RESOLVING =  1<<1,
 343         NL80211_MPATH_FLAG_DSN_VALID =  1<<2,
 344         NL80211_MPATH_FLAG_FIXED =      1<<3,
 345         NL80211_MPATH_FLAG_RESOLVED =   1<<4,
 346 };
 347
 348 /**
 349  * enum nl80211_mpath_info - mesh path information
 350  *
 351  * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting
 352  * information about a mesh path.
 353  *
 354  * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved
 355  * @NL80211_ATTR_MPATH_FRAME_QLEN: number of queued frames for this destination
 356  * @NL80211_ATTR_MPATH_DSN: destination sequence number
 357  * @NL80211_ATTR_MPATH_METRIC: metric (cost) of this mesh path
 358  * @NL80211_ATTR_MPATH_EXPTIME: expiration time for the path, in msec from now
 359  * @NL80211_ATTR_MPATH_FLAGS: mesh path flags, enumerated in
 360  *      &enum nl80211_mpath_flags;
 361  * @NL80211_ATTR_MPATH_DISCOVERY_TIMEOUT: total path discovery timeout, in msec
 362  * @NL80211_ATTR_MPATH_DISCOVERY_RETRIES: mesh path discovery retries
 363  */
 364 enum nl80211_mpath_info {
 365         __NL80211_MPATH_INFO_INVALID,
 366         NL80211_MPATH_INFO_FRAME_QLEN,
 367         NL80211_MPATH_INFO_DSN,
 368         NL80211_MPATH_INFO_METRIC,
 369         NL80211_MPATH_INFO_EXPTIME,
 370         NL80211_MPATH_INFO_FLAGS,
 371         NL80211_MPATH_INFO_DISCOVERY_TIMEOUT,
 372         NL80211_MPATH_INFO_DISCOVERY_RETRIES,
 373
 374         /* keep last */
 375         __NL80211_MPATH_INFO_AFTER_LAST,
 376         NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 1
 377 };
 378
 379 /**
 380  * enum nl80211_band_attr - band attributes
 381  * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved
 382  * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band,
 383  *      an array of nested frequency attributes
 384  * @NL80211_BAND_ATTR_RATES: supported bitrates in this band,
 385  *      an array of nested bitrate attributes
 386  */
 387 enum nl80211_band_attr {
 388         __NL80211_BAND_ATTR_INVALID,
 389         NL80211_BAND_ATTR_FREQS,
 390         NL80211_BAND_ATTR_RATES,
 391
 392         /* keep last */
 393         __NL80211_BAND_ATTR_AFTER_LAST,
 394         NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1
 395 };
 396
 397 /**
 398  * enum nl80211_frequency_attr - frequency attributes
 399  * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz
 400  * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current
 401  *      regulatory domain.
 402  * @NL80211_FREQUENCY_ATTR_PASSIVE_SCAN: Only passive scanning is
 403  *      permitted on this channel in current regulatory domain.
 404  * @NL80211_FREQUENCY_ATTR_NO_IBSS: IBSS networks are not permitted
 405  *      on this channel in current regulatory domain.
 406  * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory
 407  *      on this channel in current regulatory domain.
 408  */
 409 enum nl80211_frequency_attr {
 410         __NL80211_FREQUENCY_ATTR_INVALID,
 411         NL80211_FREQUENCY_ATTR_FREQ,
 412         NL80211_FREQUENCY_ATTR_DISABLED,
 413         NL80211_FREQUENCY_ATTR_PASSIVE_SCAN,
 414         NL80211_FREQUENCY_ATTR_NO_IBSS,
 415         NL80211_FREQUENCY_ATTR_RADAR,
 416
 417         /* keep last */
 418         __NL80211_FREQUENCY_ATTR_AFTER_LAST,
 419         NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1
 420 };
 421
 422 /**
 423  * enum nl80211_bitrate_attr - bitrate attributes
 424  * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps
 425  * @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported
 426  *      in 2.4 GHz band.
 427  */
 428 enum nl80211_bitrate_attr {
 429         __NL80211_BITRATE_ATTR_INVALID,
 430         NL80211_BITRATE_ATTR_RATE,
 431         NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE,
 432
 433         /* keep last */
 434         __NL80211_BITRATE_ATTR_AFTER_LAST,
 435         NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 1
 436 };
 437
 438 /**
 439  * enum nl80211_mntr_flags - monitor configuration flags
 440  *
 441  * Monitor configuration flags.
 442  *
 443  * @__NL80211_MNTR_FLAG_INVALID: reserved
 444  *
 445  * @NL80211_MNTR_FLAG_FCSFAIL: pass frames with bad FCS
 446  * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP
 447  * @NL80211_MNTR_FLAG_CONTROL: pass control frames
 448  * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering
 449  * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing.
 450  *      overrides all other flags.
 451  *
 452  * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use
 453  * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag
 454  */
 455 enum nl80211_mntr_flags {
 456         __NL80211_MNTR_FLAG_INVALID,
 457         NL80211_MNTR_FLAG_FCSFAIL,
 458         NL80211_MNTR_FLAG_PLCPFAIL,
 459         NL80211_MNTR_FLAG_CONTROL,
 460         NL80211_MNTR_FLAG_OTHER_BSS,
 461         NL80211_MNTR_FLAG_COOK_FRAMES,
 462
 463         /* keep last */
 464         __NL80211_MNTR_FLAG_AFTER_LAST,
 465         NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1
 466 };
 467
 468 #endif /* __LINUX_NL80211_H */