2 * Copyright (C) 1997-1998 Mark Lord <mlord@pobox.com>
3 * Copyright (C) 1998 Eddie C. Dost <ecd@skynet.be>
4 * Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org>
5 * Copyright (C) 2004 Grant Grundler <grundler at parisc-linux.org>
7 * Inspired by an earlier effort from David S. Miller <davem@redhat.com>
10 #include <linux/module.h>
11 #include <linux/types.h>
12 #include <linux/kernel.h>
13 #include <linux/interrupt.h>
14 #include <linux/pci.h>
15 #include <linux/delay.h>
16 #include <linux/ide.h>
17 #include <linux/init.h>
21 #define DRV_NAME "ns87415"
24 /* SUPERIO 87560 is a PoS chip that NatSem denies exists.
25 * Unfortunately, it's built-in on all Astro-based PA-RISC workstations
26 * which use the integrated NS87514 cell for CD-ROM support.
27 * i.e we have to support for CD-ROM installs.
28 * See drivers/parisc/superio.c for more gory details.
30 #include <asm/superio.h>
32 #define SUPERIO_IDE_MAX_RETRIES 25
34 /* Because of a defect in Super I/O, all reads of the PCI DMA status
35 * registers, IDE status register and the IDE select register need to be
38 static u8
superio_ide_inb (unsigned long port
)
41 int retries
= SUPERIO_IDE_MAX_RETRIES
;
43 /* printk(" [ reading port 0x%x with retry ] ", port); */
49 } while (tmp
== 0 && retries
-- > 0);
54 static u8
superio_read_status(ide_hwif_t
*hwif
)
56 return superio_ide_inb(hwif
->io_ports
.status_addr
);
59 static u8
superio_dma_sff_read_status(ide_hwif_t
*hwif
)
61 return superio_ide_inb(hwif
->dma_base
+ ATA_DMA_STATUS
);
64 static void superio_tf_read(ide_drive_t
*drive
, struct ide_cmd
*cmd
)
66 struct ide_io_ports
*io_ports
= &drive
->hwif
->io_ports
;
67 struct ide_taskfile
*tf
= &cmd
->tf
;
69 /* be sure we're looking at the low order bits */
70 outb(ATA_DEVCTL_OBS
, io_ports
->ctl_addr
);
72 if (cmd
->tf_flags
& IDE_TFLAG_IN_ERROR
)
73 tf
->error
= inb(io_ports
->feature_addr
);
74 if (cmd
->tf_flags
& IDE_TFLAG_IN_NSECT
)
75 tf
->nsect
= inb(io_ports
->nsect_addr
);
76 if (cmd
->tf_flags
& IDE_TFLAG_IN_LBAL
)
77 tf
->lbal
= inb(io_ports
->lbal_addr
);
78 if (cmd
->tf_flags
& IDE_TFLAG_IN_LBAM
)
79 tf
->lbam
= inb(io_ports
->lbam_addr
);
80 if (cmd
->tf_flags
& IDE_TFLAG_IN_LBAH
)
81 tf
->lbah
= inb(io_ports
->lbah_addr
);
82 if (cmd
->tf_flags
& IDE_TFLAG_IN_DEVICE
)
83 tf
->device
= superio_ide_inb(io_ports
->device_addr
);
85 if (cmd
->tf_flags
& IDE_TFLAG_LBA48
) {
86 outb(ATA_HOB
| ATA_DEVCTL_OBS
, io_ports
->ctl_addr
);
88 if (cmd
->tf_flags
& IDE_TFLAG_IN_HOB_ERROR
)
89 tf
->hob_error
= inb(io_ports
->feature_addr
);
90 if (cmd
->tf_flags
& IDE_TFLAG_IN_HOB_NSECT
)
91 tf
->hob_nsect
= inb(io_ports
->nsect_addr
);
92 if (cmd
->tf_flags
& IDE_TFLAG_IN_HOB_LBAL
)
93 tf
->hob_lbal
= inb(io_ports
->lbal_addr
);
94 if (cmd
->tf_flags
& IDE_TFLAG_IN_HOB_LBAM
)
95 tf
->hob_lbam
= inb(io_ports
->lbam_addr
);
96 if (cmd
->tf_flags
& IDE_TFLAG_IN_HOB_LBAH
)
97 tf
->hob_lbah
= inb(io_ports
->lbah_addr
);
101 static void ns87415_dev_select(ide_drive_t
*drive
);
103 static const struct ide_tp_ops superio_tp_ops
= {
104 .exec_command
= ide_exec_command
,
105 .read_status
= superio_read_status
,
106 .read_altstatus
= ide_read_altstatus
,
107 .write_devctl
= ide_write_devctl
,
109 .dev_select
= ns87415_dev_select
,
110 .tf_load
= ide_tf_load
,
111 .tf_read
= superio_tf_read
,
113 .input_data
= ide_input_data
,
114 .output_data
= ide_output_data
,
117 static void __devinit
superio_init_iops(struct hwif_s
*hwif
)
119 struct pci_dev
*pdev
= to_pci_dev(hwif
->dev
);
121 u8 port
= hwif
->channel
, tmp
;
123 dma_stat
= (pci_resource_start(pdev
, 4) & ~3) + (!port
? 2 : 0xa);
125 /* Clear error/interrupt, enable dma */
126 tmp
= superio_ide_inb(dma_stat
);
127 outb(tmp
| 0x66, dma_stat
);
130 #define superio_dma_sff_read_status ide_dma_sff_read_status
133 static unsigned int ns87415_count
= 0, ns87415_control
[MAX_HWIFS
] = { 0 };
136 * This routine either enables/disables (according to IDE_DFLAG_PRESENT)
137 * the IRQ associated with the port,
138 * and selects either PIO or DMA handshaking for the next I/O operation.
140 static void ns87415_prepare_drive (ide_drive_t
*drive
, unsigned int use_dma
)
142 ide_hwif_t
*hwif
= drive
->hwif
;
143 struct pci_dev
*dev
= to_pci_dev(hwif
->dev
);
144 unsigned int bit
, other
, new, *old
= (unsigned int *) hwif
->select_data
;
147 local_irq_save(flags
);
150 /* Adjust IRQ enable bit */
151 bit
= 1 << (8 + hwif
->channel
);
153 if (drive
->dev_flags
& IDE_DFLAG_PRESENT
)
158 /* Select PIO or DMA, DMA may only be selected for one drive/channel. */
159 bit
= 1 << (20 + (drive
->dn
& 1) + (hwif
->channel
<< 1));
160 other
= 1 << (20 + (1 - (drive
->dn
& 1)) + (hwif
->channel
<< 1));
161 new = use_dma
? ((new & ~other
) | bit
) : (new & ~bit
);
167 * Don't change DMA engine settings while Write Buffers
170 (void) pci_read_config_byte(dev
, 0x43, &stat
);
171 while (stat
& 0x03) {
173 (void) pci_read_config_byte(dev
, 0x43, &stat
);
177 (void) pci_write_config_dword(dev
, 0x40, new);
180 * And let things settle...
185 local_irq_restore(flags
);
188 static void ns87415_dev_select(ide_drive_t
*drive
)
190 ns87415_prepare_drive(drive
,
191 !!(drive
->dev_flags
& IDE_DFLAG_USING_DMA
));
193 outb(drive
->select
| ATA_DEVICE_OBS
, drive
->hwif
->io_ports
.device_addr
);
196 static void ns87415_dma_start(ide_drive_t
*drive
)
198 ns87415_prepare_drive(drive
, 1);
199 ide_dma_start(drive
);
202 static int ns87415_dma_end(ide_drive_t
*drive
)
204 ide_hwif_t
*hwif
= drive
->hwif
;
205 u8 dma_stat
= 0, dma_cmd
= 0;
207 dma_stat
= hwif
->dma_ops
->dma_sff_read_status(hwif
);
208 /* get DMA command mode */
209 dma_cmd
= inb(hwif
->dma_base
+ ATA_DMA_CMD
);
211 outb(dma_cmd
& ~1, hwif
->dma_base
+ ATA_DMA_CMD
);
212 /* from ERRATA: clear the INTR & ERROR bits */
213 dma_cmd
= inb(hwif
->dma_base
+ ATA_DMA_CMD
);
214 outb(dma_cmd
| 6, hwif
->dma_base
+ ATA_DMA_CMD
);
216 ns87415_prepare_drive(drive
, 0);
218 /* verify good DMA status */
219 return (dma_stat
& 7) != 4;
222 static void __devinit
init_hwif_ns87415 (ide_hwif_t
*hwif
)
224 struct pci_dev
*dev
= to_pci_dev(hwif
->dev
);
225 unsigned int ctrl
, using_inta
;
233 * We cannot probe for IRQ: both ports share common IRQ on INTA.
234 * Also, leave IRQ masked during drive probing, to prevent infinite
235 * interrupts from a potentially floating INTA..
237 * IRQs get unmasked in dev_select() when drive is first used.
239 (void) pci_read_config_dword(dev
, 0x40, &ctrl
);
240 (void) pci_read_config_byte(dev
, 0x09, &progif
);
241 /* is irq in "native" mode? */
242 using_inta
= progif
& (1 << (hwif
->channel
<< 1));
244 using_inta
= ctrl
& (1 << (4 + hwif
->channel
));
246 hwif
->select_data
= hwif
->mate
->select_data
;
248 hwif
->select_data
= (unsigned long)
249 &ns87415_control
[ns87415_count
++];
250 ctrl
|= (1 << 8) | (1 << 9); /* mask both IRQs */
252 ctrl
&= ~(1 << 6); /* unmask INTA */
253 *((unsigned int *)hwif
->select_data
) = ctrl
;
254 (void) pci_write_config_dword(dev
, 0x40, ctrl
);
257 * Set prefetch size to 512 bytes for both ports,
258 * but don't turn on/off prefetching here.
260 pci_write_config_byte(dev
, 0x55, 0xee);
264 * XXX: Reset the device, if we don't it will not respond to
265 * dev_select() properly during first ide_probe_port().
268 outb(12, hwif
->io_ports
.ctl_addr
);
270 outb(8, hwif
->io_ports
.ctl_addr
);
273 stat
= hwif
->tp_ops
->read_status(hwif
);
276 } while ((stat
& ATA_BUSY
) && --timeout
);
281 hwif
->irq
= pci_get_legacy_ide_irq(dev
, hwif
->channel
);
286 outb(0x60, hwif
->dma_base
+ ATA_DMA_STATUS
);
289 static const struct ide_tp_ops ns87415_tp_ops
= {
290 .exec_command
= ide_exec_command
,
291 .read_status
= ide_read_status
,
292 .read_altstatus
= ide_read_altstatus
,
293 .write_devctl
= ide_write_devctl
,
295 .dev_select
= ns87415_dev_select
,
296 .tf_load
= ide_tf_load
,
297 .tf_read
= ide_tf_read
,
299 .input_data
= ide_input_data
,
300 .output_data
= ide_output_data
,
303 static const struct ide_dma_ops ns87415_dma_ops
= {
304 .dma_host_set
= ide_dma_host_set
,
305 .dma_setup
= ide_dma_setup
,
306 .dma_start
= ns87415_dma_start
,
307 .dma_end
= ns87415_dma_end
,
308 .dma_test_irq
= ide_dma_test_irq
,
309 .dma_lost_irq
= ide_dma_lost_irq
,
310 .dma_timer_expiry
= ide_dma_sff_timer_expiry
,
311 .dma_sff_read_status
= superio_dma_sff_read_status
,
314 static const struct ide_port_info ns87415_chipset __devinitdata
= {
316 .init_hwif
= init_hwif_ns87415
,
317 .tp_ops
= &ns87415_tp_ops
,
318 .dma_ops
= &ns87415_dma_ops
,
319 .host_flags
= IDE_HFLAG_TRUST_BIOS_FOR_DMA
|
320 IDE_HFLAG_NO_ATAPI_DMA
,
323 static int __devinit
ns87415_init_one(struct pci_dev
*dev
, const struct pci_device_id
*id
)
325 struct ide_port_info d
= ns87415_chipset
;
327 #ifdef CONFIG_SUPERIO
328 if (PCI_SLOT(dev
->devfn
) == 0xE) {
329 /* Built-in - assume it's under superio. */
330 d
.init_iops
= superio_init_iops
;
331 d
.tp_ops
= &superio_tp_ops
;
334 return ide_pci_init_one(dev
, &d
, NULL
);
337 static const struct pci_device_id ns87415_pci_tbl
[] = {
338 { PCI_VDEVICE(NS
, PCI_DEVICE_ID_NS_87415
), 0 },
341 MODULE_DEVICE_TABLE(pci
, ns87415_pci_tbl
);
343 static struct pci_driver ns87415_pci_driver
= {
344 .name
= "NS87415_IDE",
345 .id_table
= ns87415_pci_tbl
,
346 .probe
= ns87415_init_one
,
347 .remove
= ide_pci_remove
,
348 .suspend
= ide_pci_suspend
,
349 .resume
= ide_pci_resume
,
352 static int __init
ns87415_ide_init(void)
354 return ide_pci_register_driver(&ns87415_pci_driver
);
357 static void __exit
ns87415_ide_exit(void)
359 pci_unregister_driver(&ns87415_pci_driver
);
362 module_init(ns87415_ide_init
);
363 module_exit(ns87415_ide_exit
);
365 MODULE_AUTHOR("Mark Lord, Eddie Dost, Andre Hedrick");
366 MODULE_DESCRIPTION("PCI driver module for NS87415 IDE");
367 MODULE_LICENSE("GPL");