Merge branch 'misc' into release
[linux-2.6/mini2440.git] / arch / x86 / kernel / traps.c
blob04d242ab0161967985bcb7f9e24f9fe54fb9f33f
1 /*
2 * Copyright (C) 1991, 1992 Linus Torvalds
3 * Copyright (C) 2000, 2001, 2002 Andi Kleen, SuSE Labs
5 * Pentium III FXSR, SSE support
6 * Gareth Hughes <gareth@valinux.com>, May 2000
7 */
9 /*
10 * Handle hardware traps and faults.
12 #include <linux/interrupt.h>
13 #include <linux/kallsyms.h>
14 #include <linux/spinlock.h>
15 #include <linux/kprobes.h>
16 #include <linux/uaccess.h>
17 #include <linux/utsname.h>
18 #include <linux/kdebug.h>
19 #include <linux/kernel.h>
20 #include <linux/module.h>
21 #include <linux/ptrace.h>
22 #include <linux/string.h>
23 #include <linux/unwind.h>
24 #include <linux/delay.h>
25 #include <linux/errno.h>
26 #include <linux/kexec.h>
27 #include <linux/sched.h>
28 #include <linux/timer.h>
29 #include <linux/init.h>
30 #include <linux/bug.h>
31 #include <linux/nmi.h>
32 #include <linux/mm.h>
33 #include <linux/smp.h>
34 #include <linux/io.h>
36 #ifdef CONFIG_EISA
37 #include <linux/ioport.h>
38 #include <linux/eisa.h>
39 #endif
41 #ifdef CONFIG_MCA
42 #include <linux/mca.h>
43 #endif
45 #if defined(CONFIG_EDAC)
46 #include <linux/edac.h>
47 #endif
49 #include <asm/stacktrace.h>
50 #include <asm/processor.h>
51 #include <asm/debugreg.h>
52 #include <asm/atomic.h>
53 #include <asm/system.h>
54 #include <asm/unwind.h>
55 #include <asm/traps.h>
56 #include <asm/desc.h>
57 #include <asm/i387.h>
59 #include <mach_traps.h>
61 #ifdef CONFIG_X86_64
62 #include <asm/pgalloc.h>
63 #include <asm/proto.h>
64 #include <asm/pda.h>
65 #else
66 #include <asm/processor-flags.h>
67 #include <asm/arch_hooks.h>
68 #include <asm/nmi.h>
69 #include <asm/smp.h>
70 #include <asm/io.h>
71 #include <asm/traps.h>
73 #include "cpu/mcheck/mce.h"
75 DECLARE_BITMAP(used_vectors, NR_VECTORS);
76 EXPORT_SYMBOL_GPL(used_vectors);
78 asmlinkage int system_call(void);
80 /* Do we ignore FPU interrupts ? */
81 char ignore_fpu_irq;
84 * The IDT has to be page-aligned to simplify the Pentium
85 * F0 0F bug workaround.. We have a special link segment
86 * for this.
88 gate_desc idt_table[256]
89 __attribute__((__section__(".data.idt"))) = { { { { 0, 0 } } }, };
90 #endif
92 static int ignore_nmis;
94 static inline void conditional_sti(struct pt_regs *regs)
96 if (regs->flags & X86_EFLAGS_IF)
97 local_irq_enable();
100 static inline void preempt_conditional_sti(struct pt_regs *regs)
102 inc_preempt_count();
103 if (regs->flags & X86_EFLAGS_IF)
104 local_irq_enable();
107 static inline void preempt_conditional_cli(struct pt_regs *regs)
109 if (regs->flags & X86_EFLAGS_IF)
110 local_irq_disable();
111 dec_preempt_count();
114 #ifdef CONFIG_X86_32
115 static inline void
116 die_if_kernel(const char *str, struct pt_regs *regs, long err)
118 if (!user_mode_vm(regs))
119 die(str, regs, err);
123 * Perform the lazy TSS's I/O bitmap copy. If the TSS has an
124 * invalid offset set (the LAZY one) and the faulting thread has
125 * a valid I/O bitmap pointer, we copy the I/O bitmap in the TSS,
126 * we set the offset field correctly and return 1.
128 static int lazy_iobitmap_copy(void)
130 struct thread_struct *thread;
131 struct tss_struct *tss;
132 int cpu;
134 cpu = get_cpu();
135 tss = &per_cpu(init_tss, cpu);
136 thread = &current->thread;
138 if (tss->x86_tss.io_bitmap_base == INVALID_IO_BITMAP_OFFSET_LAZY &&
139 thread->io_bitmap_ptr) {
140 memcpy(tss->io_bitmap, thread->io_bitmap_ptr,
141 thread->io_bitmap_max);
143 * If the previously set map was extending to higher ports
144 * than the current one, pad extra space with 0xff (no access).
146 if (thread->io_bitmap_max < tss->io_bitmap_max) {
147 memset((char *) tss->io_bitmap +
148 thread->io_bitmap_max, 0xff,
149 tss->io_bitmap_max - thread->io_bitmap_max);
151 tss->io_bitmap_max = thread->io_bitmap_max;
152 tss->x86_tss.io_bitmap_base = IO_BITMAP_OFFSET;
153 tss->io_bitmap_owner = thread;
154 put_cpu();
156 return 1;
158 put_cpu();
160 return 0;
162 #endif
164 static void __kprobes
165 do_trap(int trapnr, int signr, char *str, struct pt_regs *regs,
166 long error_code, siginfo_t *info)
168 struct task_struct *tsk = current;
170 #ifdef CONFIG_X86_32
171 if (regs->flags & X86_VM_MASK) {
173 * traps 0, 1, 3, 4, and 5 should be forwarded to vm86.
174 * On nmi (interrupt 2), do_trap should not be called.
176 if (trapnr < 6)
177 goto vm86_trap;
178 goto trap_signal;
180 #endif
182 if (!user_mode(regs))
183 goto kernel_trap;
185 #ifdef CONFIG_X86_32
186 trap_signal:
187 #endif
189 * We want error_code and trap_no set for userspace faults and
190 * kernelspace faults which result in die(), but not
191 * kernelspace faults which are fixed up. die() gives the
192 * process no chance to handle the signal and notice the
193 * kernel fault information, so that won't result in polluting
194 * the information about previously queued, but not yet
195 * delivered, faults. See also do_general_protection below.
197 tsk->thread.error_code = error_code;
198 tsk->thread.trap_no = trapnr;
200 #ifdef CONFIG_X86_64
201 if (show_unhandled_signals && unhandled_signal(tsk, signr) &&
202 printk_ratelimit()) {
203 printk(KERN_INFO
204 "%s[%d] trap %s ip:%lx sp:%lx error:%lx",
205 tsk->comm, tsk->pid, str,
206 regs->ip, regs->sp, error_code);
207 print_vma_addr(" in ", regs->ip);
208 printk("\n");
210 #endif
212 if (info)
213 force_sig_info(signr, info, tsk);
214 else
215 force_sig(signr, tsk);
216 return;
218 kernel_trap:
219 if (!fixup_exception(regs)) {
220 tsk->thread.error_code = error_code;
221 tsk->thread.trap_no = trapnr;
222 die(str, regs, error_code);
224 return;
226 #ifdef CONFIG_X86_32
227 vm86_trap:
228 if (handle_vm86_trap((struct kernel_vm86_regs *) regs,
229 error_code, trapnr))
230 goto trap_signal;
231 return;
232 #endif
235 #define DO_ERROR(trapnr, signr, str, name) \
236 dotraplinkage void do_##name(struct pt_regs *regs, long error_code) \
238 if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
239 == NOTIFY_STOP) \
240 return; \
241 conditional_sti(regs); \
242 do_trap(trapnr, signr, str, regs, error_code, NULL); \
245 #define DO_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr) \
246 dotraplinkage void do_##name(struct pt_regs *regs, long error_code) \
248 siginfo_t info; \
249 info.si_signo = signr; \
250 info.si_errno = 0; \
251 info.si_code = sicode; \
252 info.si_addr = (void __user *)siaddr; \
253 if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
254 == NOTIFY_STOP) \
255 return; \
256 conditional_sti(regs); \
257 do_trap(trapnr, signr, str, regs, error_code, &info); \
260 DO_ERROR_INFO(0, SIGFPE, "divide error", divide_error, FPE_INTDIV, regs->ip)
261 DO_ERROR(4, SIGSEGV, "overflow", overflow)
262 DO_ERROR(5, SIGSEGV, "bounds", bounds)
263 DO_ERROR_INFO(6, SIGILL, "invalid opcode", invalid_op, ILL_ILLOPN, regs->ip)
264 DO_ERROR(9, SIGFPE, "coprocessor segment overrun", coprocessor_segment_overrun)
265 DO_ERROR(10, SIGSEGV, "invalid TSS", invalid_TSS)
266 DO_ERROR(11, SIGBUS, "segment not present", segment_not_present)
267 #ifdef CONFIG_X86_32
268 DO_ERROR(12, SIGBUS, "stack segment", stack_segment)
269 #endif
270 DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0)
272 #ifdef CONFIG_X86_64
273 /* Runs on IST stack */
274 dotraplinkage void do_stack_segment(struct pt_regs *regs, long error_code)
276 if (notify_die(DIE_TRAP, "stack segment", regs, error_code,
277 12, SIGBUS) == NOTIFY_STOP)
278 return;
279 preempt_conditional_sti(regs);
280 do_trap(12, SIGBUS, "stack segment", regs, error_code, NULL);
281 preempt_conditional_cli(regs);
284 dotraplinkage void do_double_fault(struct pt_regs *regs, long error_code)
286 static const char str[] = "double fault";
287 struct task_struct *tsk = current;
289 /* Return not checked because double check cannot be ignored */
290 notify_die(DIE_TRAP, str, regs, error_code, 8, SIGSEGV);
292 tsk->thread.error_code = error_code;
293 tsk->thread.trap_no = 8;
295 /* This is always a kernel trap and never fixable (and thus must
296 never return). */
297 for (;;)
298 die(str, regs, error_code);
300 #endif
302 dotraplinkage void __kprobes
303 do_general_protection(struct pt_regs *regs, long error_code)
305 struct task_struct *tsk;
307 conditional_sti(regs);
309 #ifdef CONFIG_X86_32
310 if (lazy_iobitmap_copy()) {
311 /* restart the faulting instruction */
312 return;
315 if (regs->flags & X86_VM_MASK)
316 goto gp_in_vm86;
317 #endif
319 tsk = current;
320 if (!user_mode(regs))
321 goto gp_in_kernel;
323 tsk->thread.error_code = error_code;
324 tsk->thread.trap_no = 13;
326 if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) &&
327 printk_ratelimit()) {
328 printk(KERN_INFO
329 "%s[%d] general protection ip:%lx sp:%lx error:%lx",
330 tsk->comm, task_pid_nr(tsk),
331 regs->ip, regs->sp, error_code);
332 print_vma_addr(" in ", regs->ip);
333 printk("\n");
336 force_sig(SIGSEGV, tsk);
337 return;
339 #ifdef CONFIG_X86_32
340 gp_in_vm86:
341 local_irq_enable();
342 handle_vm86_fault((struct kernel_vm86_regs *) regs, error_code);
343 return;
344 #endif
346 gp_in_kernel:
347 if (fixup_exception(regs))
348 return;
350 tsk->thread.error_code = error_code;
351 tsk->thread.trap_no = 13;
352 if (notify_die(DIE_GPF, "general protection fault", regs,
353 error_code, 13, SIGSEGV) == NOTIFY_STOP)
354 return;
355 die("general protection fault", regs, error_code);
358 static notrace __kprobes void
359 mem_parity_error(unsigned char reason, struct pt_regs *regs)
361 printk(KERN_EMERG
362 "Uhhuh. NMI received for unknown reason %02x on CPU %d.\n",
363 reason, smp_processor_id());
365 printk(KERN_EMERG
366 "You have some hardware problem, likely on the PCI bus.\n");
368 #if defined(CONFIG_EDAC)
369 if (edac_handler_set()) {
370 edac_atomic_assert_error();
371 return;
373 #endif
375 if (panic_on_unrecovered_nmi)
376 panic("NMI: Not continuing");
378 printk(KERN_EMERG "Dazed and confused, but trying to continue\n");
380 /* Clear and disable the memory parity error line. */
381 reason = (reason & 0xf) | 4;
382 outb(reason, 0x61);
385 static notrace __kprobes void
386 io_check_error(unsigned char reason, struct pt_regs *regs)
388 unsigned long i;
390 printk(KERN_EMERG "NMI: IOCK error (debug interrupt?)\n");
391 show_registers(regs);
393 /* Re-enable the IOCK line, wait for a few seconds */
394 reason = (reason & 0xf) | 8;
395 outb(reason, 0x61);
397 i = 2000;
398 while (--i)
399 udelay(1000);
401 reason &= ~8;
402 outb(reason, 0x61);
405 static notrace __kprobes void
406 unknown_nmi_error(unsigned char reason, struct pt_regs *regs)
408 if (notify_die(DIE_NMIUNKNOWN, "nmi", regs, reason, 2, SIGINT) ==
409 NOTIFY_STOP)
410 return;
411 #ifdef CONFIG_MCA
413 * Might actually be able to figure out what the guilty party
414 * is:
416 if (MCA_bus) {
417 mca_handle_nmi();
418 return;
420 #endif
421 printk(KERN_EMERG
422 "Uhhuh. NMI received for unknown reason %02x on CPU %d.\n",
423 reason, smp_processor_id());
425 printk(KERN_EMERG "Do you have a strange power saving mode enabled?\n");
426 if (panic_on_unrecovered_nmi)
427 panic("NMI: Not continuing");
429 printk(KERN_EMERG "Dazed and confused, but trying to continue\n");
432 static notrace __kprobes void default_do_nmi(struct pt_regs *regs)
434 unsigned char reason = 0;
435 int cpu;
437 cpu = smp_processor_id();
439 /* Only the BSP gets external NMIs from the system. */
440 if (!cpu)
441 reason = get_nmi_reason();
443 if (!(reason & 0xc0)) {
444 if (notify_die(DIE_NMI_IPI, "nmi_ipi", regs, reason, 2, SIGINT)
445 == NOTIFY_STOP)
446 return;
447 #ifdef CONFIG_X86_LOCAL_APIC
449 * Ok, so this is none of the documented NMI sources,
450 * so it must be the NMI watchdog.
452 if (nmi_watchdog_tick(regs, reason))
453 return;
454 if (!do_nmi_callback(regs, cpu))
455 unknown_nmi_error(reason, regs);
456 #else
457 unknown_nmi_error(reason, regs);
458 #endif
460 return;
462 if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP)
463 return;
465 /* AK: following checks seem to be broken on modern chipsets. FIXME */
466 if (reason & 0x80)
467 mem_parity_error(reason, regs);
468 if (reason & 0x40)
469 io_check_error(reason, regs);
470 #ifdef CONFIG_X86_32
472 * Reassert NMI in case it became active meanwhile
473 * as it's edge-triggered:
475 reassert_nmi();
476 #endif
479 dotraplinkage notrace __kprobes void
480 do_nmi(struct pt_regs *regs, long error_code)
482 nmi_enter();
484 #ifdef CONFIG_X86_32
485 { int cpu; cpu = smp_processor_id(); ++nmi_count(cpu); }
486 #else
487 add_pda(__nmi_count, 1);
488 #endif
490 if (!ignore_nmis)
491 default_do_nmi(regs);
493 nmi_exit();
496 void stop_nmi(void)
498 acpi_nmi_disable();
499 ignore_nmis++;
502 void restart_nmi(void)
504 ignore_nmis--;
505 acpi_nmi_enable();
508 /* May run on IST stack. */
509 dotraplinkage void __kprobes do_int3(struct pt_regs *regs, long error_code)
511 #ifdef CONFIG_KPROBES
512 if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP)
513 == NOTIFY_STOP)
514 return;
515 #else
516 if (notify_die(DIE_TRAP, "int3", regs, error_code, 3, SIGTRAP)
517 == NOTIFY_STOP)
518 return;
519 #endif
521 preempt_conditional_sti(regs);
522 do_trap(3, SIGTRAP, "int3", regs, error_code, NULL);
523 preempt_conditional_cli(regs);
526 #ifdef CONFIG_X86_64
527 /* Help handler running on IST stack to switch back to user stack
528 for scheduling or signal handling. The actual stack switch is done in
529 entry.S */
530 asmlinkage __kprobes struct pt_regs *sync_regs(struct pt_regs *eregs)
532 struct pt_regs *regs = eregs;
533 /* Did already sync */
534 if (eregs == (struct pt_regs *)eregs->sp)
536 /* Exception from user space */
537 else if (user_mode(eregs))
538 regs = task_pt_regs(current);
539 /* Exception from kernel and interrupts are enabled. Move to
540 kernel process stack. */
541 else if (eregs->flags & X86_EFLAGS_IF)
542 regs = (struct pt_regs *)(eregs->sp -= sizeof(struct pt_regs));
543 if (eregs != regs)
544 *regs = *eregs;
545 return regs;
547 #endif
550 * Our handling of the processor debug registers is non-trivial.
551 * We do not clear them on entry and exit from the kernel. Therefore
552 * it is possible to get a watchpoint trap here from inside the kernel.
553 * However, the code in ./ptrace.c has ensured that the user can
554 * only set watchpoints on userspace addresses. Therefore the in-kernel
555 * watchpoint trap can only occur in code which is reading/writing
556 * from user space. Such code must not hold kernel locks (since it
557 * can equally take a page fault), therefore it is safe to call
558 * force_sig_info even though that claims and releases locks.
560 * Code in ./signal.c ensures that the debug control register
561 * is restored before we deliver any signal, and therefore that
562 * user code runs with the correct debug control register even though
563 * we clear it here.
565 * Being careful here means that we don't have to be as careful in a
566 * lot of more complicated places (task switching can be a bit lazy
567 * about restoring all the debug state, and ptrace doesn't have to
568 * find every occurrence of the TF bit that could be saved away even
569 * by user code)
571 * May run on IST stack.
573 dotraplinkage void __kprobes do_debug(struct pt_regs *regs, long error_code)
575 struct task_struct *tsk = current;
576 unsigned long condition;
577 int si_code;
579 get_debugreg(condition, 6);
582 * The processor cleared BTF, so don't mark that we need it set.
584 clear_tsk_thread_flag(tsk, TIF_DEBUGCTLMSR);
585 tsk->thread.debugctlmsr = 0;
587 if (notify_die(DIE_DEBUG, "debug", regs, condition, error_code,
588 SIGTRAP) == NOTIFY_STOP)
589 return;
591 /* It's safe to allow irq's after DR6 has been saved */
592 preempt_conditional_sti(regs);
594 /* Mask out spurious debug traps due to lazy DR7 setting */
595 if (condition & (DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3)) {
596 if (!tsk->thread.debugreg7)
597 goto clear_dr7;
600 #ifdef CONFIG_X86_32
601 if (regs->flags & X86_VM_MASK)
602 goto debug_vm86;
603 #endif
605 /* Save debug status register where ptrace can see it */
606 tsk->thread.debugreg6 = condition;
609 * Single-stepping through TF: make sure we ignore any events in
610 * kernel space (but re-enable TF when returning to user mode).
612 if (condition & DR_STEP) {
613 if (!user_mode(regs))
614 goto clear_TF_reenable;
617 si_code = get_si_code(condition);
618 /* Ok, finally something we can handle */
619 send_sigtrap(tsk, regs, error_code, si_code);
622 * Disable additional traps. They'll be re-enabled when
623 * the signal is delivered.
625 clear_dr7:
626 set_debugreg(0, 7);
627 preempt_conditional_cli(regs);
628 return;
630 #ifdef CONFIG_X86_32
631 debug_vm86:
632 handle_vm86_trap((struct kernel_vm86_regs *) regs, error_code, 1);
633 preempt_conditional_cli(regs);
634 return;
635 #endif
637 clear_TF_reenable:
638 set_tsk_thread_flag(tsk, TIF_SINGLESTEP);
639 regs->flags &= ~X86_EFLAGS_TF;
640 preempt_conditional_cli(regs);
641 return;
644 #ifdef CONFIG_X86_64
645 static int kernel_math_error(struct pt_regs *regs, const char *str, int trapnr)
647 if (fixup_exception(regs))
648 return 1;
650 notify_die(DIE_GPF, str, regs, 0, trapnr, SIGFPE);
651 /* Illegal floating point operation in the kernel */
652 current->thread.trap_no = trapnr;
653 die(str, regs, 0);
654 return 0;
656 #endif
659 * Note that we play around with the 'TS' bit in an attempt to get
660 * the correct behaviour even in the presence of the asynchronous
661 * IRQ13 behaviour
663 void math_error(void __user *ip)
665 struct task_struct *task;
666 siginfo_t info;
667 unsigned short cwd, swd;
670 * Save the info for the exception handler and clear the error.
672 task = current;
673 save_init_fpu(task);
674 task->thread.trap_no = 16;
675 task->thread.error_code = 0;
676 info.si_signo = SIGFPE;
677 info.si_errno = 0;
678 info.si_code = __SI_FAULT;
679 info.si_addr = ip;
681 * (~cwd & swd) will mask out exceptions that are not set to unmasked
682 * status. 0x3f is the exception bits in these regs, 0x200 is the
683 * C1 reg you need in case of a stack fault, 0x040 is the stack
684 * fault bit. We should only be taking one exception at a time,
685 * so if this combination doesn't produce any single exception,
686 * then we have a bad program that isn't synchronizing its FPU usage
687 * and it will suffer the consequences since we won't be able to
688 * fully reproduce the context of the exception
690 cwd = get_fpu_cwd(task);
691 swd = get_fpu_swd(task);
692 switch (swd & ~cwd & 0x3f) {
693 case 0x000: /* No unmasked exception */
694 #ifdef CONFIG_X86_32
695 return;
696 #endif
697 default: /* Multiple exceptions */
698 break;
699 case 0x001: /* Invalid Op */
701 * swd & 0x240 == 0x040: Stack Underflow
702 * swd & 0x240 == 0x240: Stack Overflow
703 * User must clear the SF bit (0x40) if set
705 info.si_code = FPE_FLTINV;
706 break;
707 case 0x002: /* Denormalize */
708 case 0x010: /* Underflow */
709 info.si_code = FPE_FLTUND;
710 break;
711 case 0x004: /* Zero Divide */
712 info.si_code = FPE_FLTDIV;
713 break;
714 case 0x008: /* Overflow */
715 info.si_code = FPE_FLTOVF;
716 break;
717 case 0x020: /* Precision */
718 info.si_code = FPE_FLTRES;
719 break;
721 force_sig_info(SIGFPE, &info, task);
724 dotraplinkage void do_coprocessor_error(struct pt_regs *regs, long error_code)
726 conditional_sti(regs);
728 #ifdef CONFIG_X86_32
729 ignore_fpu_irq = 1;
730 #else
731 if (!user_mode(regs) &&
732 kernel_math_error(regs, "kernel x87 math error", 16))
733 return;
734 #endif
736 math_error((void __user *)regs->ip);
739 static void simd_math_error(void __user *ip)
741 struct task_struct *task;
742 siginfo_t info;
743 unsigned short mxcsr;
746 * Save the info for the exception handler and clear the error.
748 task = current;
749 save_init_fpu(task);
750 task->thread.trap_no = 19;
751 task->thread.error_code = 0;
752 info.si_signo = SIGFPE;
753 info.si_errno = 0;
754 info.si_code = __SI_FAULT;
755 info.si_addr = ip;
757 * The SIMD FPU exceptions are handled a little differently, as there
758 * is only a single status/control register. Thus, to determine which
759 * unmasked exception was caught we must mask the exception mask bits
760 * at 0x1f80, and then use these to mask the exception bits at 0x3f.
762 mxcsr = get_fpu_mxcsr(task);
763 switch (~((mxcsr & 0x1f80) >> 7) & (mxcsr & 0x3f)) {
764 case 0x000:
765 default:
766 break;
767 case 0x001: /* Invalid Op */
768 info.si_code = FPE_FLTINV;
769 break;
770 case 0x002: /* Denormalize */
771 case 0x010: /* Underflow */
772 info.si_code = FPE_FLTUND;
773 break;
774 case 0x004: /* Zero Divide */
775 info.si_code = FPE_FLTDIV;
776 break;
777 case 0x008: /* Overflow */
778 info.si_code = FPE_FLTOVF;
779 break;
780 case 0x020: /* Precision */
781 info.si_code = FPE_FLTRES;
782 break;
784 force_sig_info(SIGFPE, &info, task);
787 dotraplinkage void
788 do_simd_coprocessor_error(struct pt_regs *regs, long error_code)
790 conditional_sti(regs);
792 #ifdef CONFIG_X86_32
793 if (cpu_has_xmm) {
794 /* Handle SIMD FPU exceptions on PIII+ processors. */
795 ignore_fpu_irq = 1;
796 simd_math_error((void __user *)regs->ip);
797 return;
800 * Handle strange cache flush from user space exception
801 * in all other cases. This is undocumented behaviour.
803 if (regs->flags & X86_VM_MASK) {
804 handle_vm86_fault((struct kernel_vm86_regs *)regs, error_code);
805 return;
807 current->thread.trap_no = 19;
808 current->thread.error_code = error_code;
809 die_if_kernel("cache flush denied", regs, error_code);
810 force_sig(SIGSEGV, current);
811 #else
812 if (!user_mode(regs) &&
813 kernel_math_error(regs, "kernel simd math error", 19))
814 return;
815 simd_math_error((void __user *)regs->ip);
816 #endif
819 dotraplinkage void
820 do_spurious_interrupt_bug(struct pt_regs *regs, long error_code)
822 conditional_sti(regs);
823 #if 0
824 /* No need to warn about this any longer. */
825 printk(KERN_INFO "Ignoring P6 Local APIC Spurious Interrupt Bug...\n");
826 #endif
829 #ifdef CONFIG_X86_32
830 unsigned long patch_espfix_desc(unsigned long uesp, unsigned long kesp)
832 struct desc_struct *gdt = get_cpu_gdt_table(smp_processor_id());
833 unsigned long base = (kesp - uesp) & -THREAD_SIZE;
834 unsigned long new_kesp = kesp - base;
835 unsigned long lim_pages = (new_kesp | (THREAD_SIZE - 1)) >> PAGE_SHIFT;
836 __u64 desc = *(__u64 *)&gdt[GDT_ENTRY_ESPFIX_SS];
838 /* Set up base for espfix segment */
839 desc &= 0x00f0ff0000000000ULL;
840 desc |= ((((__u64)base) << 16) & 0x000000ffffff0000ULL) |
841 ((((__u64)base) << 32) & 0xff00000000000000ULL) |
842 ((((__u64)lim_pages) << 32) & 0x000f000000000000ULL) |
843 (lim_pages & 0xffff);
844 *(__u64 *)&gdt[GDT_ENTRY_ESPFIX_SS] = desc;
846 return new_kesp;
848 #else
849 asmlinkage void __attribute__((weak)) smp_thermal_interrupt(void)
853 asmlinkage void __attribute__((weak)) mce_threshold_interrupt(void)
856 #endif
859 * 'math_state_restore()' saves the current math information in the
860 * old math state array, and gets the new ones from the current task
862 * Careful.. There are problems with IBM-designed IRQ13 behaviour.
863 * Don't touch unless you *really* know how it works.
865 * Must be called with kernel preemption disabled (in this case,
866 * local interrupts are disabled at the call-site in entry.S).
868 asmlinkage void math_state_restore(void)
870 struct thread_info *thread = current_thread_info();
871 struct task_struct *tsk = thread->task;
873 if (!tsk_used_math(tsk)) {
874 local_irq_enable();
876 * does a slab alloc which can sleep
878 if (init_fpu(tsk)) {
880 * ran out of memory!
882 do_group_exit(SIGKILL);
883 return;
885 local_irq_disable();
888 clts(); /* Allow maths ops (or we recurse) */
889 #ifdef CONFIG_X86_32
890 restore_fpu(tsk);
891 #else
893 * Paranoid restore. send a SIGSEGV if we fail to restore the state.
895 if (unlikely(restore_fpu_checking(tsk))) {
896 stts();
897 force_sig(SIGSEGV, tsk);
898 return;
900 #endif
901 thread->status |= TS_USEDFPU; /* So we fnsave on switch_to() */
902 tsk->fpu_counter++;
904 EXPORT_SYMBOL_GPL(math_state_restore);
906 #ifndef CONFIG_MATH_EMULATION
907 asmlinkage void math_emulate(long arg)
909 printk(KERN_EMERG
910 "math-emulation not enabled and no coprocessor found.\n");
911 printk(KERN_EMERG "killing %s.\n", current->comm);
912 force_sig(SIGFPE, current);
913 schedule();
915 #endif /* CONFIG_MATH_EMULATION */
917 dotraplinkage void __kprobes
918 do_device_not_available(struct pt_regs *regs, long error)
920 #ifdef CONFIG_X86_32
921 if (read_cr0() & X86_CR0_EM) {
922 conditional_sti(regs);
923 math_emulate(0);
924 } else {
925 math_state_restore(); /* interrupts still off */
926 conditional_sti(regs);
928 #else
929 math_state_restore();
930 #endif
933 #ifdef CONFIG_X86_32
934 dotraplinkage void do_iret_error(struct pt_regs *regs, long error_code)
936 siginfo_t info;
937 local_irq_enable();
939 info.si_signo = SIGILL;
940 info.si_errno = 0;
941 info.si_code = ILL_BADSTK;
942 info.si_addr = 0;
943 if (notify_die(DIE_TRAP, "iret exception",
944 regs, error_code, 32, SIGILL) == NOTIFY_STOP)
945 return;
946 do_trap(32, SIGILL, "iret exception", regs, error_code, &info);
948 #endif
950 void __init trap_init(void)
952 #ifdef CONFIG_X86_32
953 int i;
954 #endif
956 #ifdef CONFIG_EISA
957 void __iomem *p = early_ioremap(0x0FFFD9, 4);
959 if (readl(p) == 'E' + ('I'<<8) + ('S'<<16) + ('A'<<24))
960 EISA_bus = 1;
961 early_iounmap(p, 4);
962 #endif
964 set_intr_gate(0, &divide_error);
965 set_intr_gate_ist(1, &debug, DEBUG_STACK);
966 set_intr_gate_ist(2, &nmi, NMI_STACK);
967 /* int3 can be called from all */
968 set_system_intr_gate_ist(3, &int3, DEBUG_STACK);
969 /* int4 can be called from all */
970 set_system_intr_gate(4, &overflow);
971 set_intr_gate(5, &bounds);
972 set_intr_gate(6, &invalid_op);
973 set_intr_gate(7, &device_not_available);
974 #ifdef CONFIG_X86_32
975 set_task_gate(8, GDT_ENTRY_DOUBLEFAULT_TSS);
976 #else
977 set_intr_gate_ist(8, &double_fault, DOUBLEFAULT_STACK);
978 #endif
979 set_intr_gate(9, &coprocessor_segment_overrun);
980 set_intr_gate(10, &invalid_TSS);
981 set_intr_gate(11, &segment_not_present);
982 set_intr_gate_ist(12, &stack_segment, STACKFAULT_STACK);
983 set_intr_gate(13, &general_protection);
984 set_intr_gate(14, &page_fault);
985 set_intr_gate(15, &spurious_interrupt_bug);
986 set_intr_gate(16, &coprocessor_error);
987 set_intr_gate(17, &alignment_check);
988 #ifdef CONFIG_X86_MCE
989 set_intr_gate_ist(18, &machine_check, MCE_STACK);
990 #endif
991 set_intr_gate(19, &simd_coprocessor_error);
993 #ifdef CONFIG_IA32_EMULATION
994 set_system_intr_gate(IA32_SYSCALL_VECTOR, ia32_syscall);
995 #endif
997 #ifdef CONFIG_X86_32
998 if (cpu_has_fxsr) {
999 printk(KERN_INFO "Enabling fast FPU save and restore... ");
1000 set_in_cr4(X86_CR4_OSFXSR);
1001 printk("done.\n");
1003 if (cpu_has_xmm) {
1004 printk(KERN_INFO
1005 "Enabling unmasked SIMD FPU exception support... ");
1006 set_in_cr4(X86_CR4_OSXMMEXCPT);
1007 printk("done.\n");
1010 set_system_trap_gate(SYSCALL_VECTOR, &system_call);
1012 /* Reserve all the builtin and the syscall vector: */
1013 for (i = 0; i < FIRST_EXTERNAL_VECTOR; i++)
1014 set_bit(i, used_vectors);
1016 set_bit(SYSCALL_VECTOR, used_vectors);
1017 #endif
1019 * Should be a barrier for any external CPU state:
1021 cpu_init();
1023 #ifdef CONFIG_X86_32
1024 trap_init_hook();
1025 #endif