drivers/usb/core/hcd.h

   1 /*
   2  * Copyright (c) 2001-2002 by David Brownell
   3  *
   4  * This program is free software; you can redistribute it and/or modify it
   5  * under the terms of the GNU General Public License as published by the
   6  * Free Software Foundation; either version 2 of the License, or (at your
   7  * option) any later version.
   8  *
   9  * This program is distributed in the hope that it will be useful, but
  10  * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  11  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  12  * for more details.
  13  *
  14  * You should have received a copy of the GNU General Public License
  15  * along with this program; if not, write to the Free Software Foundation,
  16  * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  17  */
  18
  19 #ifndef __USB_CORE_HCD_H
  20 #define __USB_CORE_HCD_H
  21
  22 #ifdef __KERNEL__
  23
  24 #include <linux/rwsem.h>
  25
  26 #define MAX_TOPO_LEVEL          6
  27
  28 /* This file contains declarations of usbcore internals that are mostly
  29  * used or exposed by Host Controller Drivers.
  30  */
  31
  32 /*
  33  * USB Packet IDs (PIDs)
  34  */
  35 #define USB_PID_EXT                     0xf0    /* USB 2.0 LPM ECN */
  36 #define USB_PID_OUT                     0xe1
  37 #define USB_PID_ACK                     0xd2
  38 #define USB_PID_DATA0                   0xc3
  39 #define USB_PID_PING                    0xb4    /* USB 2.0 */
  40 #define USB_PID_SOF                     0xa5
  41 #define USB_PID_NYET                    0x96    /* USB 2.0 */
  42 #define USB_PID_DATA2                   0x87    /* USB 2.0 */
  43 #define USB_PID_SPLIT                   0x78    /* USB 2.0 */
  44 #define USB_PID_IN                      0x69
  45 #define USB_PID_NAK                     0x5a
  46 #define USB_PID_DATA1                   0x4b
  47 #define USB_PID_PREAMBLE                0x3c    /* Token mode */
  48 #define USB_PID_ERR                     0x3c    /* USB 2.0: handshake mode */
  49 #define USB_PID_SETUP                   0x2d
  50 #define USB_PID_STALL                   0x1e
  51 #define USB_PID_MDATA                   0x0f    /* USB 2.0 */
  52
  53 /*-------------------------------------------------------------------------*/
  54
  55 /*
  56  * USB Host Controller Driver (usb_hcd) framework
  57  *
  58  * Since "struct usb_bus" is so thin, you can't share much code in it.
  59  * This framework is a layer over that, and should be more sharable.
  60  *
  61  * @authorized_default: Specifies if new devices are authorized to
  62  *                      connect by default or they require explicit
  63  *                      user space authorization; this bit is settable
  64  *                      through /sys/class/usb_host/X/authorized_default.
  65  *                      For the rest is RO, so we don't lock to r/w it.
  66  */
  67
  68 /*-------------------------------------------------------------------------*/
  69
  70 struct usb_hcd {
  71
  72         /*
  73          * housekeeping
  74          */
  75         struct usb_bus          self;           /* hcd is-a bus */
  76         struct kref             kref;           /* reference counter */
  77
  78         const char              *product_desc;  /* product/vendor string */
  79         char                    irq_descr[24];  /* driver + bus # */
  80
  81         struct timer_list       rh_timer;       /* drives root-hub polling */
  82         struct urb              *status_urb;    /* the current status urb */
  83 #ifdef CONFIG_PM
  84         struct work_struct      wakeup_work;    /* for remote wakeup */
  85 #endif
  86
  87         /*
  88          * hardware info/state
  89          */
  90         const struct hc_driver  *driver;        /* hw-specific hooks */
  91
  92         /* Flags that need to be manipulated atomically */
  93         unsigned long           flags;
  94 #define HCD_FLAG_HW_ACCESSIBLE  0x00000001
  95 #define HCD_FLAG_SAW_IRQ        0x00000002
  96
  97         unsigned                rh_registered:1;/* is root hub registered? */
  98
  99         /* The next flag is a stopgap, to be removed when all the HCDs
 100          * support the new root-hub polling mechanism. */
 101         unsigned                uses_new_polling:1;
 102         unsigned                poll_rh:1;      /* poll for rh status? */
 103         unsigned                poll_pending:1; /* status has changed? */
 104         unsigned                wireless:1;     /* Wireless USB HCD */
 105         unsigned                authorized_default:1;
 106         unsigned                has_tt:1;       /* Integrated TT in root hub */
 107
 108         int                     irq;            /* irq allocated */
 109         void __iomem            *regs;          /* device memory/io */
 110         u64                     rsrc_start;     /* memory/io resource start */
 111         u64                     rsrc_len;       /* memory/io resource length */
 112         unsigned                power_budget;   /* in mA, 0 = no limit */
 113
 114 #define HCD_BUFFER_POOLS        4
 115         struct dma_pool         *pool [HCD_BUFFER_POOLS];
 116
 117         int                     state;
 118 #       define  __ACTIVE                0x01
 119 #       define  __SUSPEND               0x04
 120 #       define  __TRANSIENT             0x80
 121
 122 #       define  HC_STATE_HALT           0
 123 #       define  HC_STATE_RUNNING        (__ACTIVE)
 124 #       define  HC_STATE_QUIESCING      (__SUSPEND|__TRANSIENT|__ACTIVE)
 125 #       define  HC_STATE_RESUMING       (__SUSPEND|__TRANSIENT)
 126 #       define  HC_STATE_SUSPENDED      (__SUSPEND)
 127
 128 #define HC_IS_RUNNING(state) ((state) & __ACTIVE)
 129 #define HC_IS_SUSPENDED(state) ((state) & __SUSPEND)
 130
 131         /* more shared queuing code would be good; it should support
 132          * smarter scheduling, handle transaction translators, etc;
 133          * input size of periodic table to an interrupt scheduler.
 134          * (ohci 32, uhci 1024, ehci 256/512/1024).
 135          */
 136
 137         /* The HC driver's private data is stored at the end of
 138          * this structure.
 139          */
 140         unsigned long hcd_priv[0]
 141                         __attribute__ ((aligned(sizeof(unsigned long))));
 142 };
 143
 144 /* 2.4 does this a bit differently ... */
 145 static inline struct usb_bus *hcd_to_bus(struct usb_hcd *hcd)
 146 {
 147         return &hcd->self;
 148 }
 149
 150 static inline struct usb_hcd *bus_to_hcd(struct usb_bus *bus)
 151 {
 152         return container_of(bus, struct usb_hcd, self);
 153 }
 154
 155 struct hcd_timeout {    /* timeouts we allocate */
 156         struct list_head        timeout_list;
 157         struct timer_list       timer;
 158 };
 159
 160 /*-------------------------------------------------------------------------*/
 161
 162
 163 struct hc_driver {
 164         const char      *description;   /* "ehci-hcd" etc */
 165         const char      *product_desc;  /* product/vendor string */
 166         size_t          hcd_priv_size;  /* size of private data */
 167
 168         /* irq handler */
 169         irqreturn_t     (*irq) (struct usb_hcd *hcd);
 170
 171         int     flags;
 172 #define HCD_MEMORY      0x0001          /* HC regs use memory (else I/O) */
 173 #define HCD_LOCAL_MEM   0x0002          /* HC needs local memory */
 174 #define HCD_USB11       0x0010          /* USB 1.1 */
 175 #define HCD_USB2        0x0020          /* USB 2.0 */
 176 #define HCD_USB3        0x0040          /* USB 3.0 */
 177 #define HCD_MASK        0x0070
 178
 179         /* called to init HCD and root hub */
 180         int     (*reset) (struct usb_hcd *hcd);
 181         int     (*start) (struct usb_hcd *hcd);
 182
 183         /* NOTE:  these suspend/resume calls relate to the HC as
 184          * a whole, not just the root hub; they're for PCI bus glue.
 185          */
 186         /* called after suspending the hub, before entering D3 etc */
 187         int     (*pci_suspend)(struct usb_hcd *hcd);
 188
 189         /* called after entering D0 (etc), before resuming the hub */
 190         int     (*pci_resume)(struct usb_hcd *hcd, bool hibernated);
 191
 192         /* cleanly make HCD stop writing memory and doing I/O */
 193         void    (*stop) (struct usb_hcd *hcd);
 194
 195         /* shutdown HCD */
 196         void    (*shutdown) (struct usb_hcd *hcd);
 197
 198         /* return current frame number */
 199         int     (*get_frame_number) (struct usb_hcd *hcd);
 200
 201         /* manage i/o requests, device state */
 202         int     (*urb_enqueue)(struct usb_hcd *hcd,
 203                                 struct urb *urb, gfp_t mem_flags);
 204         int     (*urb_dequeue)(struct usb_hcd *hcd,
 205                                 struct urb *urb, int status);
 206
 207         /* hw synch, freeing endpoint resources that urb_dequeue can't */
 208         void    (*endpoint_disable)(struct usb_hcd *hcd,
 209                         struct usb_host_endpoint *ep);
 210
 211         /* (optional) reset any endpoint state such as sequence number
 212            and current window */
 213         void    (*endpoint_reset)(struct usb_hcd *hcd,
 214                         struct usb_host_endpoint *ep);
 215
 216         /* root hub support */
 217         int     (*hub_status_data) (struct usb_hcd *hcd, char *buf);
 218         int     (*hub_control) (struct usb_hcd *hcd,
 219                                 u16 typeReq, u16 wValue, u16 wIndex,
 220                                 char *buf, u16 wLength);
 221         int     (*bus_suspend)(struct usb_hcd *);
 222         int     (*bus_resume)(struct usb_hcd *);
 223         int     (*start_port_reset)(struct usb_hcd *, unsigned port_num);
 224
 225                 /* force handover of high-speed port to full-speed companion */
 226         void    (*relinquish_port)(struct usb_hcd *, int);
 227                 /* has a port been handed over to a companion? */
 228         int     (*port_handed_over)(struct usb_hcd *, int);
 229
 230                 /* CLEAR_TT_BUFFER completion callback */
 231         void    (*clear_tt_buffer_complete)(struct usb_hcd *,
 232                                 struct usb_host_endpoint *);
 233
 234         /* xHCI specific functions */
 235                 /* Called by usb_alloc_dev to alloc HC device structures */
 236         int     (*alloc_dev)(struct usb_hcd *, struct usb_device *);
 237                 /* Called by usb_release_dev to free HC device structures */
 238         void    (*free_dev)(struct usb_hcd *, struct usb_device *);
 239
 240         /* Bandwidth computation functions */
 241         /* Note that add_endpoint() can only be called once per endpoint before
 242          * check_bandwidth() or reset_bandwidth() must be called.
 243          * drop_endpoint() can only be called once per endpoint also.
 244          * A call to xhci_drop_endpoint() followed by a call to xhci_add_endpoint() will
 245          * add the endpoint to the schedule with possibly new parameters denoted by a
 246          * different endpoint descriptor in usb_host_endpoint.
 247          * A call to xhci_add_endpoint() followed by a call to xhci_drop_endpoint() is
 248          * not allowed.
 249          */
 250                 /* Allocate endpoint resources and add them to a new schedule */
 251         int     (*add_endpoint)(struct usb_hcd *, struct usb_device *, struct usb_host_endpoint *);
 252                 /* Drop an endpoint from a new schedule */
 253         int     (*drop_endpoint)(struct usb_hcd *, struct usb_device *, struct usb_host_endpoint *);
 254                 /* Check that a new hardware configuration, set using
 255                  * endpoint_enable and endpoint_disable, does not exceed bus
 256                  * bandwidth.  This must be called before any set configuration
 257                  * or set interface requests are sent to the device.
 258                  */
 259         int     (*check_bandwidth)(struct usb_hcd *, struct usb_device *);
 260                 /* Reset the device schedule to the last known good schedule,
 261                  * which was set from a previous successful call to
 262                  * check_bandwidth().  This reverts any add_endpoint() and
 263                  * drop_endpoint() calls since that last successful call.
 264                  * Used for when a check_bandwidth() call fails due to resource
 265                  * or bandwidth constraints.
 266                  */
 267         void    (*reset_bandwidth)(struct usb_hcd *, struct usb_device *);
 268                 /* Returns the hardware-chosen device address */
 269         int     (*address_device)(struct usb_hcd *, struct usb_device *udev);
 270 };
 271
 272 extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb);
 273 extern int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb,
 274                 int status);
 275 extern void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb);
 276
 277 extern int usb_hcd_submit_urb(struct urb *urb, gfp_t mem_flags);
 278 extern int usb_hcd_unlink_urb(struct urb *urb, int status);
 279 extern void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb,
 280                 int status);
 281 extern void usb_hcd_flush_endpoint(struct usb_device *udev,
 282                 struct usb_host_endpoint *ep);
 283 extern void usb_hcd_disable_endpoint(struct usb_device *udev,
 284                 struct usb_host_endpoint *ep);
 285 extern void usb_hcd_reset_endpoint(struct usb_device *udev,
 286                 struct usb_host_endpoint *ep);
 287 extern void usb_hcd_synchronize_unlinks(struct usb_device *udev);
 288 extern int usb_hcd_check_bandwidth(struct usb_device *udev,
 289                 struct usb_host_config *new_config,
 290                 struct usb_interface *new_intf);
 291 extern int usb_hcd_get_frame_number(struct usb_device *udev);
 292
 293 extern struct usb_hcd *usb_create_hcd(const struct hc_driver *driver,
 294                 struct device *dev, const char *bus_name);
 295 extern struct usb_hcd *usb_get_hcd(struct usb_hcd *hcd);
 296 extern void usb_put_hcd(struct usb_hcd *hcd);
 297 extern int usb_add_hcd(struct usb_hcd *hcd,
 298                 unsigned int irqnum, unsigned long irqflags);
 299 extern void usb_remove_hcd(struct usb_hcd *hcd);
 300
 301 struct platform_device;
 302 extern void usb_hcd_platform_shutdown(struct platform_device *dev);
 303
 304 #ifdef CONFIG_PCI
 305 struct pci_dev;
 306 struct pci_device_id;
 307 extern int usb_hcd_pci_probe(struct pci_dev *dev,
 308                                 const struct pci_device_id *id);
 309 extern void usb_hcd_pci_remove(struct pci_dev *dev);
 310 extern void usb_hcd_pci_shutdown(struct pci_dev *dev);
 311
 312 #ifdef CONFIG_PM_SLEEP
 313 extern struct dev_pm_ops        usb_hcd_pci_pm_ops;
 314 #endif
 315 #endif /* CONFIG_PCI */
 316
 317 /* pci-ish (pdev null is ok) buffer alloc/mapping support */
 318 int hcd_buffer_create(struct usb_hcd *hcd);
 319 void hcd_buffer_destroy(struct usb_hcd *hcd);
 320
 321 void *hcd_buffer_alloc(struct usb_bus *bus, size_t size,
 322         gfp_t mem_flags, dma_addr_t *dma);
 323 void hcd_buffer_free(struct usb_bus *bus, size_t size,
 324         void *addr, dma_addr_t dma);
 325
 326 /* generic bus glue, needed for host controllers that don't use PCI */
 327 extern irqreturn_t usb_hcd_irq(int irq, void *__hcd);
 328
 329 extern void usb_hc_died(struct usb_hcd *hcd);
 330 extern void usb_hcd_poll_rh_status(struct usb_hcd *hcd);
 331
 332 /* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */
 333 #define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1)
 334 #define usb_dotoggle(dev, ep, out)  ((dev)->toggle[out] ^= (1 << (ep)))
 335 #define usb_settoggle(dev, ep, out, bit) \
 336                 ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \
 337                  ((bit) << (ep)))
 338
 339 /* -------------------------------------------------------------------------- */
 340
 341 /* Enumeration is only for the hub driver, or HCD virtual root hubs */
 342 extern struct usb_device *usb_alloc_dev(struct usb_device *parent,
 343                                         struct usb_bus *, unsigned port);
 344 extern int usb_new_device(struct usb_device *dev);
 345 extern void usb_disconnect(struct usb_device **);
 346
 347 extern int usb_get_configuration(struct usb_device *dev);
 348 extern void usb_destroy_configuration(struct usb_device *dev);
 349
 350 /*-------------------------------------------------------------------------*/
 351
 352 /*
 353  * HCD Root Hub support
 354  */
 355
 356 #include "hub.h"
 357
 358 /* (shifted) direction/type/recipient from the USB 2.0 spec, table 9.2 */
 359 #define DeviceRequest \
 360         ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
 361 #define DeviceOutRequest \
 362         ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
 363
 364 #define InterfaceRequest \
 365         ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
 366
 367 #define EndpointRequest \
 368         ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
 369 #define EndpointOutRequest \
 370         ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
 371
 372 /* class requests from the USB 2.0 hub spec, table 11-15 */
 373 /* GetBusState and SetHubDescriptor are optional, omitted */
 374 #define ClearHubFeature         (0x2000 | USB_REQ_CLEAR_FEATURE)
 375 #define ClearPortFeature        (0x2300 | USB_REQ_CLEAR_FEATURE)
 376 #define GetHubDescriptor        (0xa000 | USB_REQ_GET_DESCRIPTOR)
 377 #define GetHubStatus            (0xa000 | USB_REQ_GET_STATUS)
 378 #define GetPortStatus           (0xa300 | USB_REQ_GET_STATUS)
 379 #define SetHubFeature           (0x2000 | USB_REQ_SET_FEATURE)
 380 #define SetPortFeature          (0x2300 | USB_REQ_SET_FEATURE)
 381
 382
 383 /*-------------------------------------------------------------------------*/
 384
 385 /*
 386  * Generic bandwidth allocation constants/support
 387  */
 388 #define FRAME_TIME_USECS        1000L
 389 #define BitTime(bytecount) (7 * 8 * bytecount / 6) /* with integer truncation */
 390                 /* Trying not to use worst-case bit-stuffing
 391                  * of (7/6 * 8 * bytecount) = 9.33 * bytecount */
 392                 /* bytecount = data payload byte count */
 393
 394 #define NS_TO_US(ns)    ((ns + 500L) / 1000L)
 395                         /* convert & round nanoseconds to microseconds */
 396
 397
 398 /*
 399  * Full/low speed bandwidth allocation constants/support.
 400  */
 401 #define BW_HOST_DELAY   1000L           /* nanoseconds */
 402 #define BW_HUB_LS_SETUP 333L            /* nanoseconds */
 403                         /* 4 full-speed bit times (est.) */
 404
 405 #define FRAME_TIME_BITS                 12000L  /* frame = 1 millisecond */
 406 #define FRAME_TIME_MAX_BITS_ALLOC       (90L * FRAME_TIME_BITS / 100L)
 407 #define FRAME_TIME_MAX_USECS_ALLOC      (90L * FRAME_TIME_USECS / 100L)
 408
 409 /*
 410  * Ceiling [nano/micro]seconds (typical) for that many bytes at high speed
 411  * ISO is a bit less, no ACK ... from USB 2.0 spec, 5.11.3 (and needed
 412  * to preallocate bandwidth)
 413  */
 414 #define USB2_HOST_DELAY 5       /* nsec, guess */
 415 #define HS_NSECS(bytes) (((55 * 8 * 2083) \
 416         + (2083UL * (3 + BitTime(bytes))))/1000 \
 417         + USB2_HOST_DELAY)
 418 #define HS_NSECS_ISO(bytes) (((38 * 8 * 2083) \
 419         + (2083UL * (3 + BitTime(bytes))))/1000 \
 420         + USB2_HOST_DELAY)
 421 #define HS_USECS(bytes) NS_TO_US (HS_NSECS(bytes))
 422 #define HS_USECS_ISO(bytes) NS_TO_US (HS_NSECS_ISO(bytes))
 423
 424 extern long usb_calc_bus_time(int speed, int is_input,
 425                         int isoc, int bytecount);
 426
 427 /*-------------------------------------------------------------------------*/
 428
 429 extern void usb_set_device_state(struct usb_device *udev,
 430                 enum usb_device_state new_state);
 431
 432 /*-------------------------------------------------------------------------*/
 433
 434 /* exported only within usbcore */
 435
 436 extern struct list_head usb_bus_list;
 437 extern struct mutex usb_bus_list_lock;
 438 extern wait_queue_head_t usb_kill_urb_queue;
 439
 440 extern int usb_find_interface_driver(struct usb_device *dev,
 441         struct usb_interface *interface);
 442
 443 #define usb_endpoint_out(ep_dir)        (!((ep_dir) & USB_DIR_IN))
 444
 445 #ifdef CONFIG_PM
 446 extern void usb_hcd_resume_root_hub(struct usb_hcd *hcd);
 447 extern void usb_root_hub_lost_power(struct usb_device *rhdev);
 448 extern int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg);
 449 extern int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg);
 450 #else
 451 static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd)
 452 {
 453         return;
 454 }
 455 #endif /* CONFIG_PM */
 456
 457 /*
 458  * USB device fs stuff
 459  */
 460
 461 #ifdef CONFIG_USB_DEVICEFS
 462
 463 /*
 464  * these are expected to be called from the USB core/hub thread
 465  * with the kernel lock held
 466  */
 467 extern void usbfs_update_special(void);
 468 extern int usbfs_init(void);
 469 extern void usbfs_cleanup(void);
 470
 471 #else /* CONFIG_USB_DEVICEFS */
 472
 473 static inline void usbfs_update_special(void) {}
 474 static inline int usbfs_init(void) { return 0; }
 475 static inline void usbfs_cleanup(void) { }
 476
 477 #endif /* CONFIG_USB_DEVICEFS */
 478
 479 /*-------------------------------------------------------------------------*/
 480
 481 #if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
 482
 483 struct usb_mon_operations {
 484         void (*urb_submit)(struct usb_bus *bus, struct urb *urb);
 485         void (*urb_submit_error)(struct usb_bus *bus, struct urb *urb, int err);
 486         void (*urb_complete)(struct usb_bus *bus, struct urb *urb, int status);
 487         /* void (*urb_unlink)(struct usb_bus *bus, struct urb *urb); */
 488 };
 489
 490 extern struct usb_mon_operations *mon_ops;
 491
 492 static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb)
 493 {
 494         if (bus->monitored)
 495                 (*mon_ops->urb_submit)(bus, urb);
 496 }
 497
 498 static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb,
 499     int error)
 500 {
 501         if (bus->monitored)
 502                 (*mon_ops->urb_submit_error)(bus, urb, error);
 503 }
 504
 505 static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb,
 506                 int status)
 507 {
 508         if (bus->monitored)
 509                 (*mon_ops->urb_complete)(bus, urb, status);
 510 }
 511
 512 int usb_mon_register(struct usb_mon_operations *ops);
 513 void usb_mon_deregister(void);
 514
 515 #else
 516
 517 static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb) {}
 518 static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb,
 519     int error) {}
 520 static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb,
 521                 int status) {}
 522
 523 #endif /* CONFIG_USB_MON || CONFIG_USB_MON_MODULE */
 524
 525 /*-------------------------------------------------------------------------*/
 526
 527 /* hub.h ... DeviceRemovable in 2.4.2-ac11, gone in 2.4.10 */
 528 /* bleech -- resurfaced in 2.4.11 or 2.4.12 */
 529 #define bitmap  DeviceRemovable
 530
 531
 532 /*-------------------------------------------------------------------------*/
 533
 534 /* random stuff */
 535
 536 #define RUN_CONTEXT (in_irq() ? "in_irq" \
 537                 : (in_interrupt() ? "in_interrupt" : "can sleep"))
 538
 539
 540 /* This rwsem is for use only by the hub driver and ehci-hcd.
 541  * Nobody else should touch it.
 542  */
 543 extern struct rw_semaphore ehci_cf_port_reset_rwsem;
 544
 545 /* Keep track of which host controller drivers are loaded */
 546 #define USB_UHCI_LOADED         0
 547 #define USB_OHCI_LOADED         1
 548 #define USB_EHCI_LOADED         2
 549 extern unsigned long usb_hcds_loaded;
 550
 551 #endif /* __KERNEL__ */
 552
 553 #endif /* __USB_CORE_HCD_H */