drivers/net/wireless/orinoco_cs.c

   1 /* orinoco_cs.c (formerly known as dldwd_cs.c)
   2  *
   3  * A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
   4  * as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
   5  * EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and others).
   6  * It should also be usable on various Prism II based cards such as the
   7  * Linksys, D-Link and Farallon Skyline. It should also work on Symbol
   8  * cards such as the 3Com AirConnect and Ericsson WLAN.
   9  *
  10  * Copyright notice & release notes in file orinoco.c
  11  */
  12
  13 #define DRIVER_NAME "orinoco_cs"
  14 #define PFX DRIVER_NAME ": "
  15
  16 #include <linux/module.h>
  17 #include <linux/kernel.h>
  18 #include <linux/init.h>
  19 #include <linux/delay.h>
  20 #include <pcmcia/cs_types.h>
  21 #include <pcmcia/cs.h>
  22 #include <pcmcia/cistpl.h>
  23 #include <pcmcia/cisreg.h>
  24 #include <pcmcia/ds.h>
  25
  26 #include "orinoco.h"
  27
  28 /********************************************************************/
  29 /* Module stuff                                                     */
  30 /********************************************************************/
  31
  32 MODULE_AUTHOR("David Gibson <hermes@gibson.dropbear.id.au>");
  33 MODULE_DESCRIPTION("Driver for PCMCIA Lucent Orinoco, Prism II based and similar wireless cards");
  34 MODULE_LICENSE("Dual MPL/GPL");
  35
  36 /* Module parameters */
  37
  38 /* Some D-Link cards have buggy CIS. They do work at 5v properly, but
  39  * don't have any CIS entry for it. This workaround it... */
  40 static int ignore_cis_vcc; /* = 0 */
  41 module_param(ignore_cis_vcc, int, 0);
  42 MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket");
  43
  44 /********************************************************************/
  45 /* Data structures                                                  */
  46 /********************************************************************/
  47
  48 /* PCMCIA specific device information (goes in the card field of
  49  * struct orinoco_private */
  50 struct orinoco_pccard {
  51         struct pcmcia_device    *p_dev;
  52         dev_node_t node;
  53
  54         /* Used to handle hard reset */
  55         /* yuck, we need this hack to work around the insanity of the
  56          * PCMCIA layer */
  57         unsigned long hard_reset_in_progress;
  58 };
  59
  60
  61 /********************************************************************/
  62 /* Function prototypes                                              */
  63 /********************************************************************/
  64
  65 static int orinoco_cs_config(struct pcmcia_device *link);
  66 static void orinoco_cs_release(struct pcmcia_device *link);
  67 static void orinoco_cs_detach(struct pcmcia_device *p_dev);
  68
  69 /********************************************************************/
  70 /* Device methods                                                   */
  71 /********************************************************************/
  72
  73 static int
  74 orinoco_cs_hard_reset(struct orinoco_private *priv)
  75 {
  76         struct orinoco_pccard *card = priv->card;
  77         struct pcmcia_device *link = card->p_dev;
  78         int err;
  79
  80         /* We need atomic ops here, because we're not holding the lock */
  81         set_bit(0, &card->hard_reset_in_progress);
  82
  83         err = pcmcia_reset_card(link->socket);
  84         if (err)
  85                 return err;
  86
  87         msleep(100);
  88         clear_bit(0, &card->hard_reset_in_progress);
  89
  90         return 0;
  91 }
  92
  93 /********************************************************************/
  94 /* PCMCIA stuff                                                     */
  95 /********************************************************************/
  96
  97 /*
  98  * This creates an "instance" of the driver, allocating local data
  99  * structures for one device.  The device is registered with Card
 100  * Services.
 101  *
 102  * The dev_link structure is initialized, but we don't actually
 103  * configure the card at this point -- we wait until we receive a card
 104  * insertion event.  */
 105 static int
 106 orinoco_cs_probe(struct pcmcia_device *link)
 107 {
 108         struct net_device *dev;
 109         struct orinoco_private *priv;
 110         struct orinoco_pccard *card;
 111
 112         dev = alloc_orinocodev(sizeof(*card), &handle_to_dev(link),
 113                                orinoco_cs_hard_reset, NULL);
 114         if (! dev)
 115                 return -ENOMEM;
 116         priv = netdev_priv(dev);
 117         card = priv->card;
 118
 119         /* Link both structures together */
 120         card->p_dev = link;
 121         link->priv = dev;
 122
 123         /* Interrupt setup */
 124         link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
 125         link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 126         link->irq.Handler = orinoco_interrupt;
 127         link->irq.Instance = dev;
 128
 129         /* General socket configuration defaults can go here.  In this
 130          * client, we assume very little, and rely on the CIS for
 131          * almost everything.  In most clients, many details (i.e.,
 132          * number, sizes, and attributes of IO windows) are fixed by
 133          * the nature of the device, and can be hard-wired here. */
 134         link->conf.Attributes = 0;
 135         link->conf.IntType = INT_MEMORY_AND_IO;
 136
 137         return orinoco_cs_config(link);
 138 }                               /* orinoco_cs_attach */
 139
 140 /*
 141  * This deletes a driver "instance".  The device is de-registered with
 142  * Card Services.  If it has been released, all local data structures
 143  * are freed.  Otherwise, the structures will be freed when the device
 144  * is released.
 145  */
 146 static void orinoco_cs_detach(struct pcmcia_device *link)
 147 {
 148         struct net_device *dev = link->priv;
 149
 150         if (link->dev_node)
 151                 unregister_netdev(dev);
 152
 153         orinoco_cs_release(link);
 154
 155         free_orinocodev(dev);
 156 }                               /* orinoco_cs_detach */
 157
 158 /*
 159  * orinoco_cs_config() is scheduled to run after a CARD_INSERTION
 160  * event is received, to configure the PCMCIA socket, and to make the
 161  * device available to the system.
 162  */
 163
 164 #define CS_CHECK(fn, ret) do { \
 165                 last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; \
 166         } while (0)
 167
 168 static int orinoco_cs_config_check(struct pcmcia_device *p_dev,
 169                                    cistpl_cftable_entry_t *cfg,
 170                                    cistpl_cftable_entry_t *dflt,
 171                                    unsigned int vcc,
 172                                    void *priv_data)
 173 {
 174         if (cfg->index == 0)
 175                 goto next_entry;
 176
 177         /* Use power settings for Vcc and Vpp if present */
 178         /* Note that the CIS values need to be rescaled */
 179         if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
 180                 if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
 181                         DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n",  vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
 182                         if (!ignore_cis_vcc)
 183                                 goto next_entry;
 184                 }
 185         } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
 186                 if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) {
 187                         DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n",  vcc, dflt->vcc.param[CISTPL_POWER_VNOM] / 10000);
 188                         if (!ignore_cis_vcc)
 189                                 goto next_entry;
 190                 }
 191         }
 192
 193         if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
 194                 p_dev->conf.Vpp =
 195                         cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
 196         else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
 197                 p_dev->conf.Vpp =
 198                         dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
 199
 200         /* Do we need to allocate an interrupt? */
 201         p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
 202
 203         /* IO window settings */
 204         p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
 205         if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
 206                 cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
 207                 p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
 208                 if (!(io->flags & CISTPL_IO_8BIT))
 209                         p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
 210                 if (!(io->flags & CISTPL_IO_16BIT))
 211                         p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
 212                 p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
 213                 p_dev->io.BasePort1 = io->win[0].base;
 214                 p_dev->io.NumPorts1 = io->win[0].len;
 215                 if (io->nwin > 1) {
 216                         p_dev->io.Attributes2 = p_dev->io.Attributes1;
 217                         p_dev->io.BasePort2 = io->win[1].base;
 218                         p_dev->io.NumPorts2 = io->win[1].len;
 219                 }
 220
 221                 /* This reserves IO space but doesn't actually enable it */
 222                 if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
 223                         goto next_entry;
 224         }
 225         return 0;
 226
 227 next_entry:
 228         pcmcia_disable_device(p_dev);
 229         return -ENODEV;
 230 };
 231
 232 static int
 233 orinoco_cs_config(struct pcmcia_device *link)
 234 {
 235         struct net_device *dev = link->priv;
 236         struct orinoco_private *priv = netdev_priv(dev);
 237         struct orinoco_pccard *card = priv->card;
 238         hermes_t *hw = &priv->hw;
 239         int last_fn, last_ret;
 240         void __iomem *mem;
 241
 242         /*
 243          * In this loop, we scan the CIS for configuration table
 244          * entries, each of which describes a valid card
 245          * configuration, including voltage, IO window, memory window,
 246          * and interrupt settings.
 247          *
 248          * We make no assumptions about the card to be configured: we
 249          * use just the information available in the CIS.  In an ideal
 250          * world, this would work for any PCMCIA card, but it requires
 251          * a complete and accurate CIS.  In practice, a driver usually
 252          * "knows" most of these things without consulting the CIS,
 253          * and most client drivers will only use the CIS to fill in
 254          * implementation-defined details.
 255          */
 256         last_ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL);
 257         if (last_ret) {
 258                 if (!ignore_cis_vcc)
 259                         printk(KERN_ERR PFX "GetNextTuple(): No matching "
 260                                "CIS configuration.  Maybe you need the "
 261                                "ignore_cis_vcc=1 parameter.\n");
 262                 cs_error(link, RequestIO, last_ret);
 263                 goto failed;
 264         }
 265
 266         /*
 267          * Allocate an interrupt line.  Note that this does not assign
 268          * a handler to the interrupt, unless the 'Handler' member of
 269          * the irq structure is initialized.
 270          */
 271         CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
 272
 273         /* We initialize the hermes structure before completing PCMCIA
 274          * configuration just in case the interrupt handler gets
 275          * called. */
 276         mem = ioport_map(link->io.BasePort1, link->io.NumPorts1);
 277         if (!mem)
 278                 goto cs_failed;
 279
 280         hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
 281
 282         /*
 283          * This actually configures the PCMCIA socket -- setting up
 284          * the I/O windows and the interrupt mapping, and putting the
 285          * card and host interface into "Memory and IO" mode.
 286          */
 287         CS_CHECK(RequestConfiguration,
 288                  pcmcia_request_configuration(link, &link->conf));
 289
 290         /* Ok, we have the configuration, prepare to register the netdev */
 291         dev->base_addr = link->io.BasePort1;
 292         dev->irq = link->irq.AssignedIRQ;
 293         card->node.major = card->node.minor = 0;
 294
 295         SET_NETDEV_DEV(dev, &handle_to_dev(link));
 296         /* Tell the stack we exist */
 297         if (register_netdev(dev) != 0) {
 298                 printk(KERN_ERR PFX "register_netdev() failed\n");
 299                 goto failed;
 300         }
 301
 302         /* At this point, the dev_node_t structure(s) needs to be
 303          * initialized and arranged in a linked list at link->dev_node. */
 304         strcpy(card->node.dev_name, dev->name);
 305         link->dev_node = &card->node; /* link->dev_node being non-NULL is also
 306                                     used to indicate that the
 307                                     net_device has been registered */
 308
 309         /* Finally, report what we've done */
 310         printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s, irq %d, io "
 311                "0x%04x-0x%04x\n", dev->name, dev->dev.parent->bus_id,
 312                link->irq.AssignedIRQ, link->io.BasePort1,
 313                link->io.BasePort1 + link->io.NumPorts1 - 1);
 314         return 0;
 315
 316  cs_failed:
 317         cs_error(link, last_fn, last_ret);
 318
 319  failed:
 320         orinoco_cs_release(link);
 321         return -ENODEV;
 322 }                               /* orinoco_cs_config */
 323
 324 /*
 325  * After a card is removed, orinoco_cs_release() will unregister the
 326  * device, and release the PCMCIA configuration.  If the device is
 327  * still open, this will be postponed until it is closed.
 328  */
 329 static void
 330 orinoco_cs_release(struct pcmcia_device *link)
 331 {
 332         struct net_device *dev = link->priv;
 333         struct orinoco_private *priv = netdev_priv(dev);
 334         unsigned long flags;
 335
 336         /* We're committed to taking the device away now, so mark the
 337          * hardware as unavailable */
 338         spin_lock_irqsave(&priv->lock, flags);
 339         priv->hw_unavailable++;
 340         spin_unlock_irqrestore(&priv->lock, flags);
 341
 342         pcmcia_disable_device(link);
 343         if (priv->hw.iobase)
 344                 ioport_unmap(priv->hw.iobase);
 345 }                               /* orinoco_cs_release */
 346
 347 static int orinoco_cs_suspend(struct pcmcia_device *link)
 348 {
 349         struct net_device *dev = link->priv;
 350         struct orinoco_private *priv = netdev_priv(dev);
 351         struct orinoco_pccard *card = priv->card;
 352         int err = 0;
 353         unsigned long flags;
 354
 355         /* This is probably racy, but I can't think of
 356            a better way, short of rewriting the PCMCIA
 357            layer to not suck :-( */
 358         if (! test_bit(0, &card->hard_reset_in_progress)) {
 359                 spin_lock_irqsave(&priv->lock, flags);
 360
 361                 err = __orinoco_down(dev);
 362                 if (err)
 363                         printk(KERN_WARNING "%s: Error %d downing interface\n",
 364                                dev->name, err);
 365
 366                 netif_device_detach(dev);
 367                 priv->hw_unavailable++;
 368
 369                 spin_unlock_irqrestore(&priv->lock, flags);
 370         }
 371
 372         return 0;
 373 }
 374
 375 static int orinoco_cs_resume(struct pcmcia_device *link)
 376 {
 377         struct net_device *dev = link->priv;
 378         struct orinoco_private *priv = netdev_priv(dev);
 379         struct orinoco_pccard *card = priv->card;
 380         int err = 0;
 381         unsigned long flags;
 382
 383         if (! test_bit(0, &card->hard_reset_in_progress)) {
 384                 err = orinoco_reinit_firmware(dev);
 385                 if (err) {
 386                         printk(KERN_ERR "%s: Error %d re-initializing firmware\n",
 387                                dev->name, err);
 388                         return -EIO;
 389                 }
 390
 391                 spin_lock_irqsave(&priv->lock, flags);
 392
 393                 netif_device_attach(dev);
 394                 priv->hw_unavailable--;
 395
 396                 if (priv->open && ! priv->hw_unavailable) {
 397                         err = __orinoco_up(dev);
 398                         if (err)
 399                                 printk(KERN_ERR "%s: Error %d restarting card\n",
 400                                        dev->name, err);
 401                 }
 402
 403                 spin_unlock_irqrestore(&priv->lock, flags);
 404         }
 405
 406         return err;
 407 }
 408
 409
 410 /********************************************************************/
 411 /* Module initialization                                            */
 412 /********************************************************************/
 413
 414 /* Can't be declared "const" or the whole __initdata section will
 415  * become const */
 416 static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
 417         " (David Gibson <hermes@gibson.dropbear.id.au>, "
 418         "Pavel Roskin <proski@gnu.org>, et al)";
 419
 420 static struct pcmcia_device_id orinoco_cs_ids[] = {
 421         PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100), /* SonicWALL Long Range Wireless Card */
 422         PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300), /* Sohoware NCP110, Philips 802.11b */
 423         PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0002), /* AnyPoint(TM) Wireless II PC Card */
 424         PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), /* 3Com AirConnect PCI 777A */
 425         PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000), /* PROXIM RangeLAN-DS/LAN PC CARD */
 426         PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), /* Compaq WL100 11 Mbps Wireless Adapter */
 427         PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), /* Lucent Orinoco and old Intersil */
 428         PCMCIA_DEVICE_MANF_CARD(0x016b, 0x0001), /* Ericsson WLAN Card C11 */
 429         PCMCIA_DEVICE_MANF_CARD(0x01eb, 0x080a), /* Nortel Networks eMobility 802.11 Wireless Adapter */
 430         PCMCIA_DEVICE_MANF_CARD(0x01ff, 0x0008), /* Intermec MobileLAN 11Mbps 802.11b WLAN Card */
 431         PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), /* Samsung SWL2000-N 11Mb/s WLAN Card */
 432         PCMCIA_DEVICE_MANF_CARD(0x0261, 0x0002), /* AirWay 802.11 Adapter (PCMCIA) */
 433         PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0001), /* ARtem Onair */
 434         PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0305), /* Buffalo WLI-PCM-S11 */
 435         PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), /* Linksys WPC11 Version 2.5 */
 436         PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), /* Linksys WPC11 Version 3 */
 437         PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002), /* Compaq HNW-100 11 Mbps Wireless Adapter */
 438         PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673), /* Linksys WCF12 Wireless CompactFlash Card */
 439         PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002), /* ASUS SpaceLink WL-100 */
 440         PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x0002), /* SpeedStream SS1021 Wireless Adapter */
 441         PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x3021), /* SpeedStream Wireless Adapter */
 442         PCMCIA_DEVICE_MANF_CARD(0x14ea, 0xb001), /* PLANEX RoadLannerWave GW-NS11H */
 443         PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300), /* Airvast WN-100 */
 444         PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021), /* Adaptec Ultra Wireless ANW-8030 */
 445         PCMCIA_DEVICE_MANF_CARD(0xc001, 0x0008), /* CONTEC FLEXSCAN/FX-DDS110-PCC */
 446         PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002), /* Conceptronic CON11Cpro, EMTAC A2424i */
 447         PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002), /* Safeway 802.11b, ZCOMAX AirRunner/XI-300 */
 448         PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005), /* D-Link DCF660, Sandisk Connect SDWCFB-000 */
 449         PCMCIA_DEVICE_PROD_ID12(" ", "IEEE 802.11 Wireless LAN/PC Card", 0x3b6e20c8, 0xefccafe9),
 450         PCMCIA_DEVICE_PROD_ID12("3Com", "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3),
 451         PCMCIA_DEVICE_PROD_ID12("ACTIONTEC", "PRISM Wireless LAN PC Card", 0x393089da, 0xa71e69d5),
 452         PCMCIA_DEVICE_PROD_ID12("Addtron", "AWP-100 Wireless PCMCIA", 0xe6ec52ce, 0x08649af2),
 453         PCMCIA_DEVICE_PROD_ID123("AIRVAST", "IEEE 802.11b Wireless PCMCIA Card", "HFA3863", 0xea569531, 0x4bcb9645, 0x355cb092),
 454         PCMCIA_DEVICE_PROD_ID12("Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio", 0x5cd01705, 0x4271660f),
 455         PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11b_PC_CARD_25", 0x78fc06ee, 0xdb9aa842),
 456         PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11B_CF_CARD_25", 0x78fc06ee, 0x45a50c1e),
 457         PCMCIA_DEVICE_PROD_ID12("Avaya Communication", "Avaya Wireless PC Card", 0xd8a43b78, 0x0d341169),
 458         PCMCIA_DEVICE_PROD_ID12("BENQ", "AWL100 PCMCIA ADAPTER", 0x35dadc74, 0x01f7fedb),
 459         PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-PCM-L11G", 0x2decece3, 0xf57ca4b3),
 460         PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-CF-S11G", 0x2decece3, 0x82067c18),
 461         PCMCIA_DEVICE_PROD_ID12("Cabletron", "RoamAbout 802.11 DS", 0x32d445f5, 0xedeffd90),
 462         PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card", 0x54f7c49c, 0x15a75e5b),
 463         PCMCIA_DEVICE_PROD_ID123("corega", "WL PCCL-11", "ISL37300P", 0x0a21501a, 0x59868926, 0xc9049a39),
 464         PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCC-11", 0x5261440f, 0xa6405584),
 465         PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCCA-11", 0x5261440f, 0xdf6115f9),
 466         PCMCIA_DEVICE_PROD_ID12("corega_K.K.", "Wireless_LAN_PCCB-11", 0x29e33311, 0xee7a27ae),
 467         PCMCIA_DEVICE_PROD_ID12("D", "Link DRC-650 11Mbps WLAN Card", 0x71b18589, 0xf144e3ac),
 468         PCMCIA_DEVICE_PROD_ID12("D", "Link DWL-650 11Mbps WLAN Card", 0x71b18589, 0xb6f1b0ab),
 469         PCMCIA_DEVICE_PROD_ID12("D-Link Corporation", "D-Link DWL-650H 11Mbps WLAN Adapter", 0xef544d24, 0xcd8ea916),
 470         PCMCIA_DEVICE_PROD_ID12("Digital Data Communications", "WPC-0100", 0xfdd73470, 0xe0b6f146),
 471         PCMCIA_DEVICE_PROD_ID12("ELSA", "AirLancer MC-11", 0x4507a33a, 0xef54f0e3),
 472         PCMCIA_DEVICE_PROD_ID12("HyperLink", "Wireless PC Card 11Mbps", 0x56cc3f1a, 0x0bcf220c),
 473         PCMCIA_DEVICE_PROD_ID123("Instant Wireless ", " Network PC CARD", "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0),
 474         PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless 2011 LAN PC Card", 0x816cc815, 0x07f58077),
 475         PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE", 0x74c5e40d, 0xdb472a18),
 476         PCMCIA_DEVICE_PROD_ID12("INTERSIL", "I-GATE 11M PC Card / PC Card plus", 0x74c5e40d, 0x8304ff77),
 477         PCMCIA_DEVICE_PROD_ID12("Intersil", "PRISM 2_5 PCMCIA ADAPTER", 0x4b801a17, 0x6345a0bf),
 478         PCMCIA_DEVICE_PROD_ID123("Intersil", "PRISM Freedom PCMCIA Adapter", "ISL37100P", 0x4b801a17, 0xf222ec2d, 0x630d52b2),
 479         PCMCIA_DEVICE_PROD_ID12("LeArtery", "SYNCBYAIR 11Mbps Wireless LAN PC Card", 0x7e3b326a, 0x49893e92),
 480         PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card", 0x0733cc81, 0x0c52f395),
 481         PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/IEEE", 0x23eb9949, 0xc562e72a),
 482         PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11", 0x481e0094, 0x7360e410),
 483         PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11G", 0x481e0094, 0xf57ca4b3),
 484         PCMCIA_DEVICE_PROD_ID12("Microsoft", "Wireless Notebook Adapter MN-520", 0x5961bf85, 0x6eec8c01),
 485         PCMCIA_DEVICE_PROD_ID12("NCR", "WaveLAN/IEEE", 0x24358cd4, 0xc562e72a),
 486         PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401 Wireless PC", "Card", 0xa37434e9, 0x9762e8f1),
 487         PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401RA Wireless PC", "Card", 0x0306467f, 0x9762e8f1),
 488         PCMCIA_DEVICE_PROD_ID12("Nortel Networks", "emobility 802.11 Wireless LAN PC Card", 0x2d617ea0, 0x88cd5767),
 489         PCMCIA_DEVICE_PROD_ID12("OEM", "PRISM2 IEEE 802.11 PC-Card", 0xfea54c90, 0x48f2bdd6),
 490         PCMCIA_DEVICE_PROD_ID12("OTC", "Wireless AirEZY 2411-PCC WLAN Card", 0x4ac44287, 0x235a6bed),
 491         PCMCIA_DEVICE_PROD_ID123("PCMCIA", "11M WLAN Card v2.5", "ISL37300P", 0x281f1c5d, 0x6e440487, 0xc9049a39),
 492         PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-CF110", 0x209f40ab, 0xd9715264),
 493         PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-NS110", 0x209f40ab, 0x46263178),
 494         PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PC CARD HARMONY 80211B", 0xc6536a5e, 0x090c3cd9),
 495         PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PCI CARD HARMONY 80211B", 0xc6536a5e, 0x9f494e26),
 496         PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "11Mbps WLAN Card", 0x43d74cb4, 0x579bd91b),
 497         PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2532W-B EliteConnect Wireless Adapter", 0xc4f8b18b, 0x196bd757),
 498         PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2632W", 0xc4f8b18b, 0x474a1f2a),
 499         PCMCIA_DEVICE_PROD_ID12("Symbol Technologies", "LA4111 Spectrum24 Wireless LAN PC Card", 0x3f02b4d6, 0x3663cb0e),
 500         PCMCIA_DEVICE_PROD_ID123("The Linksys Group, Inc.", "Instant Wireless Network PC Card", "ISL37300P", 0xa5f472c2, 0x590eb502, 0xc9049a39),
 501         PCMCIA_DEVICE_PROD_ID12("ZoomAir 11Mbps High", "Rate wireless Networking", 0x273fe3db, 0x32a1eaee),
 502         PCMCIA_DEVICE_NULL,
 503 };
 504 MODULE_DEVICE_TABLE(pcmcia, orinoco_cs_ids);
 505
 506 static struct pcmcia_driver orinoco_driver = {
 507         .owner          = THIS_MODULE,
 508         .drv            = {
 509                 .name   = DRIVER_NAME,
 510         },
 511         .probe          = orinoco_cs_probe,
 512         .remove         = orinoco_cs_detach,
 513         .id_table       = orinoco_cs_ids,
 514         .suspend        = orinoco_cs_suspend,
 515         .resume         = orinoco_cs_resume,
 516 };
 517
 518 static int __init
 519 init_orinoco_cs(void)
 520 {
 521         printk(KERN_DEBUG "%s\n", version);
 522
 523         return pcmcia_register_driver(&orinoco_driver);
 524 }
 525
 526 static void __exit
 527 exit_orinoco_cs(void)
 528 {
 529         pcmcia_unregister_driver(&orinoco_driver);
 530 }
 531
 532 module_init(init_orinoco_cs);
 533 module_exit(exit_orinoco_cs);